下载文档原格式
USER MANUALSALES OFFICE (301) 975-1000TECHNICAL SUPPORT (301) 975-1007Part # 07M542/543-B Doc. #072601U,Rev. C Revised 1/22/08An ISO-9001Certified Company1.0 WARRANTY INFORMATIONPatton Electronics warrants all Model 542/543 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not perform as warranted, your sole recourse shall be repair or replacement as described above. Under no condition shall Patton Electronics be liable for any damages incurred by the use of this product. These damages include, but are not limited to, the following: lost profits, lost savings and incidental or consequential damages arising from the use of or inability to use this product. Patton Electronics specifically disclaims all other warranties, expressed or implied, and the installation or use of this product shall be deemed an acceptance of these terms by the user.1.1 SERVICEAll warranty and nonwarranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Support: (301) 975-1007; ; or,******************.Notice: Packages received without an RMA number will not be accepted. Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Patton Model 542/543. Technical Service hours: 8AM to 5PM EST, Monday through Friday.1.2 CE NOTICEThe CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the Union European (EU). A Certificate of Compliance is available by contacting Technical Support.12.0 GENERAL INFORMATIONThank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions arise during installation or use of the unit, contact Patton Electronics Technical Support at (301) 975-10072.1 FEATURES• Connects directly to video security cameras• Surge capacity of 400 A, 8/20μs wave form• Protects against transients from either direction• Provides separate connection to chassis ground• Silicone Avalanche Diode surge protection• One male and one female BNC-type connectors on 542• One male and one female, or two female F-series connectors on 543• Made in the USA2.2 DESCRIPTIONThe Model 542 and 543 are primary surge protectors for CCTV and SATV/CATV security systems with coax cabling. To offer extra protection against damaging transient surges, the Model 542 and 543 utilize a “two point” approach: for each CCTV line, one Model 542 protects the building entrance/exit while a second Model 542 protects each remote camera location. The Model 543 works similarly for SATV/CATV lines. Both the Model 542 and 543, with bandwidths of 80 MHz each, clamp surge voltages at 12 volts and have response times of 0.2 μsecs. The Model 542/543 offers two circuits for surge protection, the Primary and the Secondary:Primary:The Primary circuitry consists of the “quick response”circuitry that protects the data from normal surges that fall into the IEC 801.2, 801.4, and 801.5 categories. The protection is between the data line and the shield ground. The Primary can handle 400A with an8/20μs wave form. Refer to Appendix A for the specifications.Secondary: The Secondary circuitry contains powerful surge protection devices that are slower, but can handle larger currents than the faster response SAD. This protection is parallel to the primary protection and between the shield ground and the frame ground (braid connection). The Secondary can handle 20kA with an 8/20μs wave form. Refer to Appendix A for the specifications.23.0 INSTALLATIONThe Patton Model 542 and 543 are easy to install. The following instructions will clearly explain each step:1.Unplug the existing connection between the coaxial cable and theCCTV equipment's BNC port for the 542, or the SATV/CATVequipment’s F-Series port for the 543.2.Install the Model 542 or 543 between the incoming coax line andthe protected equipment (see below). Place the surge protector as close as possible to the device being protected.3.Connect the braided grounding strap directly to an earth groundconnection on or near the protected device. If you are not surewhere to locate an earth ground connection, consult theequipment's user manual or contact the manufacturer. This ground connection is critical for proper operation of the Model 542 or 543.4PATTON MODEL 542/543 SPECIFICATIONSCase: Molded ABS (black) plasticInterface: Coaxial, with one male and one female BNC-typeconnector, for CCTV Security Systems, or one maleand one female, or two female F-series connectorsfor SATV/CATV Security Systems.Circuit: Solid state, bidirectional protection on BNC or F-series connectorsPrimary CircuitResponse Time: 400A (8/20μs wave form )clamped to +/-12V after 0.2μs.Surge Capacity: 1.5KW for 1mSMaximum Clamp Voltage:12 Volts when subjected to6kV/3kA test transientSecondary CircuitResponse Time:100μsSurge Capacity: 20kA (8/20μs wave form)Bandwidth (3dB)in 50/50 ohms Circuit: 80 MhzSeries Resistance: 4.3 ohmsCapacitance: 45pf (line-line or line-ground)Operational/StorageTemperature:-55 to +100°C (-67 to 212°F) Grounding:External connection provides separate unit-ground to earth-ground contactSize: 2.0” long x 1.0” diameter5Dear Valued Customer,Thank you for purchasing Patton Electronics products! We do appreciate your business. I trust that you find this user manual helpful.We manufacture one of the widest selections of data communications products in the world including CSU/DSU's, network termination units, powered and self-powered short range modems, fiber optic modems, interface converters, baluns, electronic data switches, data-line surge protectors, multiplexers, transceivers, hubs, print servers and much more. We produce these products at our Gaithersburg, MD, USA, facility, and can custom manufacture products for your unique needs.We would like to hear from you. Please contact us in any of the following ways to tell us how you like this product and how we can meet your product needs today and in the future.Web: Sales E-mail: ****************Support E-mail: ******************Phone - Sales (301) 975-1000Phone - Support (301) 975-1007Fax: (301) 869-9293Mail: Patton Electronics Company7622 Rickenbacker DriveGaithersburg, MD 20879 USAWe are committed to a quality product at a quality price. Patton Electronics is ISO 9001 certified. We meet and exceed the highest standards in the industry (CE, UL, etc.).It is our business to serve you. If you are not satisfied with any aspect of this product or the service provided from Patton Electronics or its distributors, please let us know.Thank you.Burton A.PattonVice PresidentP.S. Please tell us where you purchased this product:__________________________________________________________________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________。
15.9、AMDG-X/F1 系列电动机保护器15.9.1、4-20mA模拟量输出AMDG-X/F1 系列电动机保护器有4路与采集、保护电路及DSP相隔离的4-20mA输出信号，这4路4-20mA输出信号可输出A、B、C相电流、电压、零序电流中的4个变量。
通过设置参数C，可改变A、B、C相电流、电压的4-20mA模拟量表示的电流、电压范围。
零序电流的4-20mA模拟量表示的零序电流范围是固定不变的。
以C4C3C2C1四位十进制数表示C参数值， C1、C2、C3、C4分别是C参数右边数第一、第二、第三、第四位十进制数。
C1是显示电压、零序电流选择位，C2是电压显示值与检测值倍数设置位，C3是4-20mA信号输出A、B、C相电流、电压、零序电流选择位，C4选择4-20mA输出电流范围。
C4 = 0、1、2、3、4、5、6、7、8，对应的4-20mA输出表示A、B、C相电流分别是参数D设定值的1、1.5、2、2.5、3、3.5、4、4.5、5倍。
I2C4=0对应的4-20mA表示的电流范围 C4=2对应的4-20mA表示的电流范围在上图中，I1表示A、B、C相电流（参数D设定值的倍数），I2表示4-20mA模拟量输出值（mA）。
C4=0，20mA对应的A、B、C相电流是参数D设定值的1倍；C4=2，20mA对应的A、B、C相电流是参数D设定值的2倍。
C4 = 0、1、2、3、4、5、6、7、8，对应的4-20mA输出表示A、B、C相电流（参数D设定值的倍数）如下表。
C4 4 mA 8 mA 12 mA 16 mA 20 mA0 0 0.25 0.5 0.75 11 0 0.375 0.75 1.125 1.52 0 0.5 1 1.5 23 0 0.625 1.25 1.875 2.54 0 0.75 1.5 2.25 35 0 0.875 1.75 2.625 3.56 0 1 2 3 47 0 1.125 2.25 3.375 4.58 0 1.25 2.5 3.75 5电压检测值的范围是0 - 500V，C2 = 0、1、2、3时，电压（电压显示值）值分别为检测值的1、1.732、3、5.196倍，电压（电压显示值）的4-20mA 模拟量表示的电压值范围分别是0 - 500V、0 - 866V、0 - 1500V、0 - 2598V。
Installation Guide EN 990-6510A – 08/2023As standards, specifications, and design change from time to time, please ask for confirmation of the information given in this publication.© 2023 Schneider Electric .All rights reserved.Schneider Electric35 rue Joseph Monier92500 Rueil Malmaison - FrancePhone: +33 (0) 1 41 29 70 00APC ™ Smart-UPS ™ UltraPower Distribution Unit (PDU) SRTL003, SRTL004, and SRTL005Important Safety InstructionsSAVE THESE INSTRUCTIONS - This manual contains important instructions thatshould be followed during installation and maintenance of the Smart-UPS PDUs.This is the “Read user manual” symbol. Read the user documentation tobecome familiar with the equipment.Read these instructions carefully and look at the equipment to become familiar withthe device before trying to install or operate it.The following special messages may appear throughout this bulletin or on theequipment to warn of potential hazards or to call attention to information that clarifiesor simplifies a procedure.The addition of this symbol either to a “Danger” or “Warning” safety labelindicates that an electrical hazard exists which will result in personal injuryif the instructions are not followed.This is the safety alert symbol. It is used to alert you to potential personalinjury hazards. Obey all safety messages that follow this symbol to avoidpossible injury or death.Electrical equipment should be installed and operated only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.NOTICENOTICE is used to address practices not related to physical injury.APC Smart-UPS Ultra PDUs SRTL 003/004/005Package Contents Package ContentsInspect the contents upon receipt. Notify the carrier and dealer if there isdamage.PDU ReplacementThe PDU in the following illustrations is only for representation. The replacementprocedure is applicable for all the PDUs, SRTL003, SRTL004, and SRTL005.Remove the existing PDUIEC PDU (SRTL003) PDU with 2x L6-30R and 2x L6-20R receptacles (SRTL005)PDU with 4x L6-20R receptacles (SRTL004)PDU Replacement APC Smart-UPS Ultra PDUs SRTL 003/004/005Install the replacement PDUAPC Smart-UPS Ultra PDUs SRTL 003/004/005PDU Replacement。
iPR 可插拔式电涌保护器1/8 iST 固定式电涌保护器2/8 iPT 可插拔式通信基站和OEM专用电涌保护器3/8 iPR-DC 可插拔式光伏发电专用电涌保护器3/8PRF1 Ⅰ级试验电涌保护器4/8 PR 可插拔式电涌保护器4/8 ST 固定式电涌保护器5/8 PT 可插拔式通信基站和OEM专用电涌保护器6/8 PR-DC 可插拔式光伏发电专用电涌保护器6/8 PL 速装式电涌保护器7/8 PRC/PRI 信号类电涌保护器7/8 SE 系列天馈类/信号类电涌保护器7/8EA9L 固定式电涌保护器8/8iPR 可插拔式电涌保护器IEC试验类别：Ⅱ级试验 (8/20us)符合标准：IEC 61643-1/GB 18802.1最大可持续运行电压Uc：340V最大放电电流Imax：120/80/65/40/20/10kA标称放电电流In：60/40/35/20/10/5kA电压保护水平Up：2.1/2.0/1.5/1.2/1.0kV级数：1P/2P/3P/4P/1P+N/3P+NReference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型A9L916870iPR 120r 1P1965.12库存产品A9L916800iPR 65r 1P1050.74非库存产品A9L916802iPR 65r 1P+N2199.28非库存产品A9L916803iPR 65r 2P2008.93非库存产品A9L916804iPR 65r 3P3253.77库存产品A9L916806iPR 65r 3P+N3891.88库存产品A9L916807iPR 65r 4P3514.39库存产品A9L916808iPR 40r 1P830.82非库存产品A9L916809iPR 40 1P545.35非库存产品A9L916812iPR 40r 1P+N1563.63库存产品A9L916813iPR 40 1P+N1114.48库存产品A9L916814iPR 40r 2P1469.90非库存产品A9L916815iPR 40 2P1067.99库存产品A9L916816iPR 40r 3P2211.17非库存产品A9L916817iPR 40 3P1605.94库存产品A9L916820iPR 40r 3P+N2978.58库存产品A9L916821iPR 40 3P+N1919.70库存产品A9L916822iPR 40r 4P2791.98库存产品A9L916823iPR 40 4P1746.91库存产品A9L916844iPR 20r 1P754.02非库存产品A9L916824iPR 20 1P482.58非库存产品A9L916825iPR 20r 1P+N1331.93非库存产品A9L916826iPR 20 1P+N913.31库存产品A9L916847iPR 20r 2P1252.13非库存产品A9L916827iPR 20 2P901.41库存产品A9L916848iPR 20r 3P1894.42非库存产品A9L916828iPR 20 3P1252.45库存产品A9L916850iPR 20r 3P+N2729.74库存产品A9L916830iPR 20 3P+N1663.79库存产品A9L916851iPR 20r 4P2484.11库存产品A9L916831iPR 20 4P1514.03库存产品A9L916832iPR 10 1P403.31非库存产品A9L916834iPR 10 1P+N922.52非库存产品A9L916835iPR 10 2P839.29非库存产品A9L916836iPR 10 3P1216.24非库存产品A9L916838iPR 10 3P+N1623.94库存产品A9L916839iPR 10 4P1506.43非库存产品A9L916865iPR 80r 1P1157.22非库存产品A9L916864iPR 80r 1P NPE1081.70非库存产品A9L916867iD120-3401575.84非库存产品A9L916840iD65-340787.87非库存产品A9L916843iD40-340415.41非库存产品A9L916846iD20-340378.78非库存产品A9L916849iD10-340303.04非库存产品A9L916842iDGn407.38非库存产品A9L916862iD80-340902.59非库存产品A9L916863iDGn-80843.68非库存产品iST 固定式电涌保护器IEC试验类别：Ⅱ级试验 (8/20us)符合标准：IEC 61643-1/GB 18802.1最大可持续运行电压Uc：340V最大放电电流Imax：65/40/20kA标称放电电流In：35/20/10kA电压保护水平Up：1.8/1.5/1.2kV级数：1P/2P/3P/4P/1P+N/3P+NReference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型A9L916600iST 65 1P771.80非库存产品A9L916603iST 65 2P1703.53非库存产品A9L916604iST 65 3P2881.85非库存产品A9L916605iST 65r 3P+N3347.29库存产品A9L916606iST 65 3P+N2906.27库存产品A9L916607iST 65r 4P3194.00非库存产品A9L916608iST 65 4P2729.85库存产品A9L916609iST 40 1P463.72非库存产品A9L916611iST 40 1P+N1077.52非库存产品A9L916612iST 40 2P967.94非库存产品A9L916613iST 40 3P1601.34非库存产品A9L916614iST 40r 3P+N2322.90非库存产品A9L916615iST 40 3P+N1658.54库存产品A9L916616iST 40r 4P2235.92非库存产品A9L916617iST 40 4P1595.12库存产品A9L916618iST 20 1P253.45非库存产品A9L916620iST 20 1P+N603.73库存产品A9L916621iST 20 2P512.68库存产品A9L916622iST 20 3P919.84库存产品A9L916623iST 20 3P+N970.29库存产品A9L916624iST 20 4P911.59库存产品A9L916625iST 20r 3P+N1236.27非库存产品iPT 可插拔式通信基站和OEM专用电涌保护器IEC试验类别：Ⅱ级试验 (8/20us)符合标准：GB 18802.1, YD 1235.1最大可持续运行电压Uc：385V最大放电电流Imax：40/20kA标称放电电流In：20/10kA电压保护水平Up：1.6/1.5kV级数：1P+N/3P+NReference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型A9L916871iPT 40r 3P+N3127.58非库存产品A9L916872iPT 40 3P+N1977.33非库存产品A9L916873iPT 40 1P+N1170.18非库存产品A9L916874iPT 20r 3P+N2729.74非库存产品A9L916875iPT 20 3P+N1799.51非库存产品A9L916876iPT 20 1P+N987.97非库存产品A9L916885iD40-385415.41非库存产品A9L916886iD20-385378.78非库存产品A9L916887iDGn PT407.38非库存产品iPR-DC 可插拔式光伏发电专用电涌保护器符合标准：GB 18802.1最大可持续运行电压Uc：840/1230V标准开路电压Uocstc：600/1000V最大放电电流Imax：40kA标称放电电流In：15kA电压保护水平Up：2.8/3.9kVReference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型A9L16434iPR-DC 40r 600PV2321.72非库存产品A9L16436iPR-DC 40r 1000PV2391.24非库存产品A9L16683iD40 600PV415.41非库存产品A9L16692iD40 1000PV415.41非库存产品A9L16690iCneutral407.38非库存产品PRF1 Ⅰ级试验电涌保护器IEC试验类别：Ⅰ级试验 (10/350us)符合标准：IEC 61643-1/GB 18802.1最大可持续运行电压Uc：440/350V最大冲击电流Iimp：50/12.5kA标称放电电流In：50/25kA电压保护水平Up：1.5kV级数：1P/3P/1P+N/3P+NReference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型16630PRF1 Master 1P 440V2709.48非库存产品16632PRF1 12.5KA 1P+N2628.23非库存产品16633PRF1 12.5KA 3P4118.57非库存产品16634PRF1 12.5KA 3P+N4835.35库存产品PR 可插拔式电涌保护器IEC试验类别：Ⅱ级试验 (8/20us)符合标准：IEC 61643-1/GB 18802.1最大可持续运行电压Uc：340V最大放电电流Imax：120/65/40/20/10kA标称放电电流In：60/35/20/10/5kA电压保护水平Up：2.1/2.0/1.5/1.2/1.0kV级数：1P/2P/3P/4P/1P+N/3P+NReference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型916870PR 120 r 120kA 1P2080.69库存产品916800PR 65r 65kA 1P 340V 1112.54非库存产品916802PR 65r 65kA 1P+N 340V2328.63非库存产品916803PR 65r 65kA 2P 340V2127.08非库存产品916804PR 65r 65kA 3P 340V3445.13库存产品916806PR 65r 65kA 3P+N 340V4120.78库存产品916807PR 65r 65kA 4P 340V 3721.08库存产品916808PR 40r 40kA 1P 340V879.69非库存产品916809PR 40 40kA 1P 340V 577.42非库存产品916812PR 40r 40kA 1P+N 340V1655.59非库存产品916813PR 40 40kA 1P+N 340V 1180.02非库存产品916814PR 40r 40kA 2P 340V1556.35非库存产品916815PR 40 40kA 2P 340V 1130.80非库存产品916816PR 40r 40kA 3P 340V2341.22非库存产品916817PR 40 40kA 3P 340V 1700.39库存产品916820PR 40r 40kA 3P+N 340V3065.28库存产品916821PR 40 40kA 3P+N 340V 1975.66库存产品916822PR 40r 40kA 4P 340V2956.18非库存产品916823PR 40 40kA 4P 340V 1849.65库存产品916844PR 20r 20kA 1P 340V798.36非库存产品916824PR 20 20kA 1P 340V 510.96非库存产品916825PR 20r 20kA 1P+N 340V 1410.26非库存产品916826PR 20 20kA 1P+N 340V 967.02非库存产品916847PR 20r 20kA 2P 340V1325.77非库存产品916827PR 20 20kA 2P 340V 954.43非库存产品916848PR 20r 20kA 3P 340V2005.83非库存产品916828PR 20 20kA 3P 340V 1326.11非库存产品916850PR 20r 20kA 3P+N 340V2890.28非库存产品916830PR 20 20kA 3P+N 340V 1761.64库存产品916851PR 20r 20kA 4P 340V2630.21非库存产品916831PR 20 20kA 4P 340V 1603.08库存产品916832PR 10 10kA 1P 340V 427.03非库存产品916834PR 10 10kA 1P+N 340V 976.77非库存产品916835PR 10 10kA 2P 340V 888.65非库存产品916836PR 10 10kA 3P 340V 1287.77非库存产品916838PR 10 10kA 3P+N 340V 1719.45非库存产品916839PR 10 10kA 4P 340V 1595.03非库存产品916867D120-3401668.52非库存产品916840D65-340834.20非库存产品916843D40-340439.84非库存产品916846D20-340401.05非库存产品916849D10-340320.87非库存产品916842DGn431.34非库存产品ST 固定式电涌保护器IEC试验类别：Ⅱ级试验 (8/20us)符合标准：IEC 61643-1/GB 18802.1最大可持续运行电压Uc：340V最大放电电流Imax：65/40/20kA标称放电电流In：35/20/10kA电压保护水平Up：1.8/1.5/1.2kV级数：1P/2P/3P/4P/1P+N/3P+NReference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型916600ST 65 65kA 1P 340V817.19非库存产品916603ST 65 65kA 2P 340V1803.72非库存产品916604ST 65 65kA 3P 340V3051.34非库存产品916605ST 65r 65kA 3P+N 340V3544.15非库存产品916606ST 65 65kA 3P+N 340V3077.20非库存产品916607ST 65r 65kA 4P 340V3381.84非库存产品916608ST 65 65kA 4P 340V2890.40库存产品916609ST 40 40kA 1P 340V491.00非库存产品916611ST 40 40kA 1P+N 340V1140.89非库存产品916612ST 40 40kA 2P 340V1024.86非库存产品916613ST 40 40kA 3P 340V1695.52非库存产品916614ST 40r 40kA 3P+N 340V2459.51非库存产品916615ST 40 40kA 3P+N 340V1756.08库存产品916616ST 40r 40kA 4P 340V2367.42非库存产品916617ST 40 40kA 4P 340V1688.94库存产品916618ST 20 20kA 1P 340V268.35非库存产品916620ST 20 20kA 1P+N 340V639.24非库存产品916621ST 20 20kA 2P 340V542.83非库存产品916622ST 20 20kA 3P 340V973.94非库存产品916623ST 20 20kA 3P+N 340V1027.36库存产品916624ST 20 20kA 4P 340V965.20库存产品916625ST 20r 20kA 3P+N 340V1308.98非库存产品PT 可插拔式通信基站和OEM专用电涌保护器IEC试验类别：Ⅱ级试验 (8/20us)符合标准：GB 18802.1, YD 1235.1最大可持续运行电压Uc：385V最大放电电流Imax：40/20kA标称放电电流In：20/10kA电压保护水平Up：1.6/1.5kV级数：1P+N/3P+NReference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型916871PT 40r 40kA 3P+N3311.52非库存产品916872PT 40 40kA 3P+N2093.62非库存产品916873PT 40 40kA 1P+N1239.00非库存产品916874PT 20r 20kA 3P+N2890.28非库存产品916875PT 20 20kA 3P+N1905.34非库存产品916876PT 20 20kA 1P+N1046.07非库存产品916885D40-385439.84非库存产品916886D20-385401.05非库存产品916887DGn PT431.34非库存产品PR-DC 可插拔式光伏发电专用电涌保护器符合标准：GB 18802.1最大可持续运行电压Uc：840/1230V标准开路电压Uocstc：600/1000V最大放电电流Imax：40kA标称放电电流In：15kA电压保护水平Up：2.8/3.9kVReference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型16434PR-DC 40r 600PV2458.27非库存产品16436PR-DC 40r 1000PV2531.87非库存产品16684D40-460439.84非库存产品16685D40-340439.84非库存产品16691Cneutral431.34非库存产品PL 速装式电涌保护器IEC试验类别：Ⅱ级试验 (8/20us)符合标准：IEC 61643-1/GB 18802.1最大可持续运行电压Uc：320V最大放电电流Imax：10kA标称放电电流In：5kA电压保护水平Up：1.5kV级数：1P+N/3P+NReference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型16638PL 10 1P+N703.99非库存产品16639PL 10 3P+N1193.79非库存产品PRC/PRI 信号类电涌保护器最大可持续运行电压Uc：PRC: 130VAC, 180VDC; PRI: 37VAC, 53VDC最大放电电流Imax：PRC: 18kA; PRI: 10kA标称放电电流In：PRC: 10kA; PRI: 10kA电压保护水平Up：PRC: 300; PRI: 70V可保护进线数：2对Reference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型16339PRI2011.44非库存产品16337PRC2017.94非库存产品SE 系列天馈类/信号类电涌保护器Reference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型911660SETT8-10N-40739.60非库存产品911661SETT17-24N-40845.76非库存产品911662SETT8-10D-601394.98非库存产品911663SETT8-25D-601660.55非库存产品911664SEKT25N-10852.49非库存产品911665SEKT25T-10M753.38非库存产品911666SEKT25D-101014.76非库存产品911672SEKT15FL-10896.69非库存产品911673SEKT20F-10970.44非库存产品911667SEWT16N-10CN1195.22非库存产品911668SEWT10N-20N2160.92非库存产品911669SEWT20N-20N2160.92非库存产品911670SEWT10D-20N2597.70非库存产品911671SEWT20D-20N2597.70非库存产品9116676SEXM-1B-5918.30非库存产品9116677SEXM-1B-24918.30非库存产品9116678SEXL-1H-12695.95非库存产品9116679SEXL-1H-48695.95非库存产品9116680SEXL-1H-110695.95非库存产品9116681SEXM-2R-51108.24非库存产品9116682SEXH-2R-51185.52非库存产品9116683SEXL-1J-5927.89非库存产品9116684SEXL-1J-12773.11非库存产品9116685SEXL-1J-24773.11非库存产品9116686SEXL-1J-110773.11非库存产品9116687SEXL-2J-51217.71非库存产品9116688SEXL-2J-121739.70非库存产品9116689SEXL-2J-241652.72非库存产品9116690SEXL-2J-1101449.66非库存产品EA9L 固定式电涌保护器IEC试验类别：Ⅱ级试验 (8/20us)符合标准：IEC 61643-1/GB 18802.1最大可持续运行电压Uc：340V最大放电电流Imax：65/40/20kA标称放电电流In：35/20/10kA电压保护水平Up：1.8/1.5/1.2kV级数：1P+N/3P+NReference Description Unit price with VAT (RMB)Stock / Indent 订货号中文说明含税单价 (RMB)存货类型EA9L208Fr400EA9L电涌保护器20kA 3P+N (带遥信接点）1227.39非库存产品EA9L208F400EA9L电涌保护器20kA 3P+N943.61库存产品EA9L209F230EA9L电涌保护器20kA 1P+N542.91库存产品EA9L408Fr400EA9L电涌保护器40kA 3P+N (带遥信接点）2067.83非库存产品EA9L408F400EA9L电涌保护器40kA 3P+N1515.07库存产品EA9L409F230EA9L电涌保护器40kA 1P+N995.09非库存产品EA9L658Fr400EA9L电涌保护器65kA 3P+N (带遥信接点）3268.18非库存产品EA9L658F400EA9L电涌保护器65kA 3P+N2832.88库存产品EA9L659F230EA9L电涌保护器65kA 1P+N1647.99非库存产品。
施耐德触摸屏说 明 及 操 作 手 册使用该设备前请务必仔细阅读本说明书柳州富达机械有限公司LIUZHOU TECH MACHINERY CO., LTDCode 2205 6010 41 Edition 7/2009柳州富达机械有限公司公司地址：柳州市阳和工业新区工业园，B-22-1，B-23-1 邮编：545006 商务部电话：（0772）3171004 3172024 3172648 3172248售后服务电话：（0772）3172247 3173004技术部电话：（0772）3171256 3171564传 真：（0772）3171027网 址：E-mail：fudalz@ liutech@授权及服务中心如果机器需要停机或者没有正常运行，请关闭机器但不要试图去修理他。
请联系一个拥有授权的服务中心来修理，并且需要采用原配件。
对本建议的疏忽将会对压缩机设备的安全造成损坏。
说 明请妥善保存本说明书，以便随时查用；本手册是该机器的一部分。
请您务必在使用本机器之前详细阅读本说明书。
.对设备进行的安装以及随后的操作都必须充分地考虑到电气设备的操作规定及个人安全因素。
性能和安全说明当需要对机器进行维修的时候应先停机。
即使是小的操作也需要由拥有资格的技术人员来进行。
制造商对任何因违反本手册所造成的损失不负任何责任。
本设备不允许安装在户外。
施耐德触摸屏XBT RT500操作说明一、本说明书仅适用于使用施耐德触摸屏XBT RT500的螺杆压缩机。
XBT RT500的操作为触摸+按键相结合的形式：二、运行参数的显示在该页面上，可翻看压缩机的各种状态信息。
三、参数的设定在运行参数显示页面，按下F2按键，可进入参数设定页面。
该页面有三个选项，通过三个触摸箭头分别进入。
通过返回箭头会到参数显示页面。
1、压力传感器调零在机器开动前，要对压力传感器调零。
通过两边的触摸按键，使压力传感器显示的压力在零压状态下显示为零。
2、运行参数的设定，该项参数不需密码3、保护参数的设定在进入设定前，必需输入密码。
浪涌保护器产品介绍一、电源电涌保护器随着电源电涌保护器的普及和应用，对电涌保护器的安装方式和附加功能的要求也越来越高。
我们根据使用场合的不同要求，开发研制出适用于不同使用场合的电涌保护器，总共有三个级别，五种类型。
一、二、三级电涌保护器采用模块式的结构，方便实现不同组合方式的集成，用户也可选择带有遥信报警端子及其他的一些附加功能。
电源电涌保护器是一种并联型电涌保护器。
一级电源电涌保护器内部采用火花间隙技术，二级和三级电源电涌保护器内部采用压敏电阻技术。
当电网系统正常时，电涌保护器内部器件处于高阻状态，不影响系统正常运行，当线路中出现过电压时，内部器件以纳秒级速度开始泄放电流，呈现低阻状态，将过电压幅值限制到较低水平，从而保护设备免遭过电压的损坏。
各防雷区电源电涌保护器的安装，根据低压电器标准将电器设备按照过电压类别划分为信号水平、负载水平、配电及控制水平、电源水平，其绝缘耐冲击电压的等级可确定电涌保护器的选择，电压等级：1500V、2500V、4000V、6000V。
根据被保护设备的安装位置和防雷区雷电流的大小，确定供电系统电涌保护器的安装位置及通流能力。
一级和二级电源电涌保护器之间的安装距离应大于15米，二级和三级电源电涌保护器之间的安装距离应大于5米，接至被保护设备前端的保护器与保护设备的距离应不大于10米（尽可能短）。
如果由于安装位置的限制，不能保证安装距离，则各级电涌保护器之间需加装解耦组件，使得后级电涌保护器可以得到前级电涌保护器的保护。
在低压电源供电系统中，接入电感器可以达到解耦的目的，15米电缆的等效电感为24μH，5米电缆的等效电感为8μH。
二、信号电涌保护器在石油石化、金融、交通、通信、气象、邮政等行业中，电涌过电压造成的损失日益加剧，如造成接口电路毁坏，甚至造成整个系统瘫痪。
随着数据处理设备中高级电子部件的集成化程度不断提高，其耐受过电压的能力却在下降，信号系统过电压保护就显得尤为重要。
᱂ܝ⇨ϴЏԧᓔথഄ☦▊ṗᎹ࣏☿⇨☿⇨᪂᪂07/⌾⍠⌾⍠ֱᡸ఼ֱᡸ఼ֱᡸ఼ՓϬՓϬՓϬ᪸ᯢк᪸ᯢк᮴⏥᮴⏥ṙᗱᅝṙᗱᅝṙᗱᅝᅝܼᅝܼᅝܼ᪂᪂᪂᳝└᳝└᳝└݀ৌ݀ৌT h e S L P S e r i e s is a range of surge protec-tion devices combining high packing densi-ties, application versatility, proven hybrid cir-cuitry and simple installation -- features which make the series the most cost effec-tive surge protection solution for process control equipment systems and communica-tions networks.T h e m u l t i -s t a g e h y b r i d s u r g e p r o t e c t i o n n e t -w o r k at the heart of the SLP uses a combi-nation of solid state electronics and a gas filled discharge tube (GDT) to provide surge protection up to 20kA. This impressive surge protection circuit is designed to exhibit exceptionally low line resistance and adds only a tiny voltage drop to the circuit.I n o p e r a t i o n , t h e S L P d e v i c e d o e s n o t a d v e r s e l y a f f e c t t h e p e r f o r m a n c e o r o p e r a -t i o n o f t h e l o o p or combined equipment. The device allows signals to pass with very little attenuation while diverting surge currents safely to ground and clamping output volt-ages to safe levels.F u l l y a u t o m a t i c i n o p e r a t i o n ,SLP devicesreact immediately to make sure thatequipment is never exposed to damagingsurges between lines or the lines andground. Reacting instantaneously, the SLPredirects surges safely to ground andthen resets automatically.T h e v e r s a t i l e S L P s e r i e s d e s i g n c o n s i d e r st h e n e e d f o r h i g h p a c k i n g d e n s i t i e s andhas a product combining protection fortwo process loops into one case. Eachmodule provides full hybrid surge protec-tion for two process loops.F o r h i g h e r b a n d w i d t h a p p l i c a t i o n s ,the SLPseries has been developed to meet thedemands of today’s highest speed com-munication systems.O n e s i m p l e m a n u a l o p e r a -t i o n clamps modulessecurely onto D I Nrail, which auto-matically provides the essential high-integrity ground connection.A 10 Y e a r ‘N o F u s s ’ w a r r a n t y is available as standard for the SLP so if a correctly connected device should fail for any rea-son, simply return it for a free replace-ment.‘T o p -h a t ’ (T -s e c t i o n ) D I N r a i l is generally suitable for mounting SLP modules although for adverse environments, a spe-cially-plated version is available from MTL Surge Technologies.Data & SignalProtectionUltra-slim user-friendly devices for protecting electronic equipment and systems against surges on signal and I/O cabling.G S u r g e p r o t e c t i o n f o r t w o l o o p s p e r S L P (o r o n e 4-w i r e c i r c u i t )G P l u g c o n n e c t o r s f o r q u i c k a n d e a s y c o n n e c t i o n o r r e w i r i n gG S p a c e -s a v i n g d e s i g n , 6m m w i d t h p e r l o o pG M u l t i -s t a g e h y b r i d p r o t e c t i o n c i r c u i t r y - 20k A m a x i m u m s u r g e c u r r e n tG R a n g e o f v o l t a g e r a t i n g s - t o s u i t a l l p r o c e s s I /O a p p l i c a t i o n sG D e s i g n e d f o r h i g h b a n d w i d t h , l o w r e s i s t a n c e a p p l i c a t i o n sSLP SeriesS p e c i f i c a t i o n All figures typical at 77°F (25°C) unless otherwise statedM a x i m u m s u r g e c u r r e n t 20kA (8/20μs waveform) per line L e a k a g e C u r r e n t <1μA @ working voltage M a x i m u m r a t e d l o a d c u r r e n t1.50A L o o p r e s i s t a n c e 2 OhmC a p a c i t a n c eLine - Line - 60pFB a n d w i d t h-1db @9kHz - 37MHz-3dB @50MHzR e s p o n s e t i m e<1nsA m b i e n t t e m p e r a t u r e–40°F to +176°F (working)–40°C to +80°C (working)–40°F to +176°F (storage)–40°C to +80°C (storage)H u m i d i t y5 to 95% RH (non-condensing)T e r m i n a l s12 AWG (2.5mm 2)E l e c t r i c a l c o n n e c t i o n sPlug/header screw terminal strip M o u n t i n gT-section DIN-rail(35 x 15mm rail)W e i g h t5oz (140g approximately)Case flammabilityUL94 V-2E M C c o m p l i a n c eBS EN 60950:1992BS EN 61000-6-2:1999BS EN 61010-1:1993E l e c t r i c a l s a f e t yUL Isolated Loop Protector (Pending)Class I, Division 2, Groups A, B, C & Dhazardous locations (Pending)T o o r d e r s p e c i f y - Order by module, as listed in the specifi-cation table.Note: I n accordance with our policy of continuous improvement,we reserve the right to change the product’s specification withoutnotice.2 Installation Connection detailsR e vA09/16/04S t a n d a r d C e r t i f i c a t e /A p p r o v e d f o r P r。
