OSN550 安装

RF550VPN Application ExamplesThe examples on the following pages illustrate:1.A LAN-to-LAN VPN setup between Site A and Site B.Both sites have public static IP addresses.2.A LAN-to-LAN VPN setup between Site A and Site B.Site A has a public static IP address.Site B has a dynamic address.3.A Client-to-LAN VPN setup between Site A and SSH IPSec Client.The SSH IPSec client has a public static IP address.4.A Client-to-LAN VPN setup between Site A and SSH IPSec Client.The SSH IPSec client has a dynamic IP address.Note: To set up an SSH IPSec Client, see the Appendix A in the complete User Guide.RF550VPN Screens Used to Set Up These ExamplesTo access the VPN input screens, use a Web Browser:1.When the Web Browser displays the RF550VPN main menu, click theSetup Wizard button at the top of the screen. The Setup Wizard opens on the Time Settings screen.2.Click the VPN Settings button on the left of the Time Settings screen.The VPN Settings screen for entering your Connection Name displays.3.Type the Connection Name (i.e., Site B) onto this screen. Click theAdd button.4.The VPN Settings input screen (shown after each example) displays.Example 1LAN-to-LAN VPN Setup Between Site A and Site B. Site A has a public static IP address.Site B has a public static IP address.Input for Example 1 – Site AThe screen below shows the VPN settings for Site A in the example of a LAN-to-LAN VPN setup between Site A and Site B with both sites having public static IP addresses.Site A is connected to Site B with the Connection Name of Site B. The addresses correspond with the addresses shown in Example 1 on the previous page.Input for Example 1 – Site BThe screen below shows the VPN settings for Site B in the example of a LAN-to-LAN VPN setup between Site A and Site B with both sites having public static IP addresses.Site B is connected to Site A with the Connection Name of Site A. The addresses correspond with the addresses shown in Example 1.Example 2LAN-to-LAN VPN Setup Between Site A and Site B Site A has a public static IP addressSite B has a dynamic IP addressInput for Example 2 – Site AThe screen below shows the VPN settings for Site A in the example of a LAN-to-LAN VPN setup between Site A and Site B. Site A has a public static IP address, and Site B has a dynamic IP address.Site A is connected to Site B with the Connection Name of Site B. The addresses correspond with the addresses shown in Example 2 on the previous page.192.168.2.0255.255.255.0Input for Example 2 – Site BThe screen below shows the VPN settings for Site B in the example of a LAN-to-LAN VPN setup between Site A and Site B. Site A has a public static IP address, and Site B has a dynamic IP address.Site B is connected to Site A with the Connection Name of Site A. The addresses correspond with the addresses shown in Example 2.Example 3Client-to-LAN VPN Setup Between Site A and an SSH IPSec ClientSSH IPSec client has public static IP address.Input for Example 3 – Site AThe screen below shows the VPN settings for Site A in the example of a Client-to-LAN VPN Setup Between Site A and an SSH IPSec Client with the SSH IPSec client having a public static IP address.Site A is connected to an SSH IPSec Client with the Connection Name of StaticIPClient. The addresses correspond with the addresses shown in Example 3 on the previous page.Note: Refer to the complete User Guide for how to set up an SSH IPSec Client.Application Examples 55Example 4Client-to-LAN VPN Setup Between Site A and an SSH IPSec ClientSSH IPSec client has dynamic IP address:Multi-Tech Systems, Inc. RF550VPN Quick Start Guide 56Input for Example 4 – Site AThe screen below shows the settings for Site A in the example of a Client-to-LAN VPN Setup Between Site A and an SSH IPSec Client with the SSH IPSec client having a dynamic IP address.Site A is connected to an SSH IPSec Client with the Connection Name of DynamicIPClient. The addresses correspond with the addresses shown inExample 4 on the previous page.。

安装说明：
本教程适用于PSP1000/2000非V3自制系统用户。

PSP3000/2000V3用户请移步这里，查看PSP3000/2000V3适用系统。

软件安装：
1.使用USB线连接电脑和PSP，下载软件，将其解压，得到名为“PSP”文件夹。

2.将解压得到的“PSP”拷贝至PSP记忆棒根目录下，如提示覆盖选择覆盖全部即可（注：覆盖并不影响文件夹内其它文件）。

升级说明：
1.升级PSP系统有一定风险，请玩家自行斟酌，谨慎操作；
2.升级之后遇到不能运行的玩家，请在XMB界面下按Select键呼出Vsh菜单，将UMD ISO MODE设定为M33 driver。

升级教程：
1.如果你的PSP是普罗米修斯系统，请继续下一步。

如果不是，请参考这里，先将你的PSP主机升级至普罗米修斯系统。

PS：550 GEN-D3系统也可直接升级。

2.安装完毕之后，打开PSP，在游戏目录下，可以看到5.50普罗米修斯4系统的升级图标，进入吧。

3.进入之后，出现如下图所示界面，根据提示选择：×键为安装系统，R键为退出软件。

这里按×键选择安装系统。

4.安装成功，接下来根据提示再次按×键，退出软件即可。

PS：这里如果未成功，首先请确认安装无误。

如安装正常，请检查你的PSP记忆棒根目录下有无550.PBP这个文件，没有话，请点击这里下载5.50的官方系统固件，然后重命名为550.PBP放到记忆棒中（注：此系统根据官方5.50系统破解而来，如记忆棒中没有5.50官方系统在升级时会提示失败）。

5.升级之后，再次查看主机的系统，已经变成了Prome-4。

电脑操作系统安装指南Windows和MacOS系统的安装步骤电脑操作系统安装指南在如今信息化发展迅猛的时代，电脑已经成为人们生活中必不可少的工具。

而要让电脑完全发挥作用，一个稳定的操作系统是必不可少的。

目前主流的操作系统包括Windows和MacOS系统，接下来将为大家介绍这两个系统的安装步骤。

一、Windows系统的安装步骤1. 准备安装Windows系统所需的材料。

首先，你需要一张Windows系统的安装光盘或者一个U盘镜像。

其次，确保你的电脑满足Windows系统的最低配置要求。

2. 插入安装光盘或者连接U盘。

将Windows系统的安装光盘插入电脑的光驱中，或者连接U盘到电脑的USB接口上。

3. 重启电脑并进入BIOS设置。

按下电脑开机时显示的按键（通常是F2、Delete或Esc），进入电脑的BIOS设置。

4. 设置启动顺序为光驱或U盘。

在BIOS设置页面中，找到“Boot”或“启动”选项，将启动顺序设置为首选光驱或U盘。

5. 保存设置并退出BIOS。

根据BIOS界面的提示，将设置保存并退出BIOS设置。

6. 开机并按照提示安装Windows系统。

电脑重新启动后，按照屏幕上的提示进行Windows系统的安装。

包括选择语言、接受许可协议、分区硬盘等步骤，选择你所需要的设置并等待安装完成。

7. 完成安装并进行设置。

安装完成后，根据引导进行系统设置，包括网络连接、更新系统补丁、安装所需软件等。

二、MacOS系统的安装步骤1. 准备安装MacOS系统所需的材料。

你需要一台已经安装了MacOS系统的Mac电脑或者一个MacOS系统的安装盘/镜像。

2. 连接MacOS安装盘/镜像。

如果你有安装盘或者镜像文件，连接到Mac电脑的USB接口上。

3. 重启电脑并进入恢复模式。

按下Mac电脑开机时的Command + R组合键，进入恢复模式。

4. 打开磁盘工具并抹掉硬盘。

在恢复模式中，选择“磁盘工具”，并找到你的硬盘。

PTN950槽位图单板列表及槽位PTN3900—8处理槽位和接口板处理槽位对应接口板槽位处理槽位对应接口板槽位5槽位1、2槽位13槽位15、16槽位6槽位3、4槽位14槽位17、18槽位7、8、11、12槽位无单板列表及槽位单板名称描述可插槽位EX2 10GE业务接入处理5、7、11、13EG16 16路以太网处理板5、7、11、13EG8 8路以太网处理板5～8、11～14MP1 处理母板，与业务子卡配合5～8、11～14MD1 32路E1子卡，与MP1配合MQ1 63路E1子卡,与MP1配合AUX 辅助接口板20、21PIU 电源板19、22风扇27PTN3900子架分上下2层上层20个槽位,下层18个槽位，2个风扇槽位，共40槽位每个处理槽位容量为20Gbit/s处理槽位和接口板单板列表及槽位Metro1000槽位图单板列表及槽位OSN1500 单板未拆分时的槽位和容量不拆分时对偶槽位单板拆分后的槽位和容量拆分后对偶槽位处理槽位和接口板单板列表及槽位OSN2500处理槽位和接口板处理槽位对应接口板槽位处理槽位对应接口板槽位6槽位1、2槽位12槽位15、16槽位7槽位3、4槽位13槽位17、18槽位单板列表及槽位单板名称描述可插槽位SL16 STM—16光接口板5～8、11～13 SLQ4 4路STM—4光接口板5~8、11～13SLD4 2路STM-4光接口板5～8、11~13SL4 1路STM—4光接口板5～8、11~13SLQ1 4路STM—1光接口板5~8、11~13SL1 1路STM-1光接口板5～8、11～13OSN3500 不同交叉板的各槽位容量处理槽位和接口板单板列表及槽位OSN7500(A): Active(B): S tandby 处理槽位和接口板对偶槽位单板列表及槽位OSN550OSN550使用PCXLX/PCXX时各槽位接入容量(64Gbit/s)OSN550使用PCXLG/PCXGB时各槽位接入容量（46Gbit/s）OSN550使用PCXGA时各槽位接入容量（30Gbit/s）单板列表及槽位OSN580 直流机盒交流机盒单板列表及槽位MA5680T单板列表及槽位GICF 2路GE光接口上行板17~18 EPBC 4端口EPON OLT接口板1~6、9~16 EPBD 8端口EPON OLT接口板1～6、9~16 EPSD 8端口EPON OLT接口板1~6、9～16 PRTA 电源接口板19～20 PRTE 电源接口板19～20 PRTG 电源接口板19～20 GPBC 4端口GPON OLT接口板1～6、9～16 GPBD 8端口GPON OLT接口板1～6、9～16 GPBH 8端口GPON OLT接口板1~6、9～16MA5683T单板列表及槽位单板名称描述可插槽位SCUL 超级主控板6～7。

Sun M5000Solaris 10系统的安装、打补丁及IPMP的配置目录一、安装准备 (3)节 1.01 1 M5000的初始设置 (4)节 1.02 2 添加用户及给机器加电 (4)二、安装系统 (15)三、打补丁 (49)四、做镜像 (86)五、配置IPMP (92)一、安装准备首先使用串口线将笔记本与M5000连接，端口的设置请看（图1-1）：图1-1操作系统安装以及IP地址配置如下：系统的分区如下：节 1.01 1 M5000的初始设置新出厂的机器，XSCF没有设置用户，需要使用串口进行初始用户的创建。

机器加插上电源后，XSCF启动完成后出现登陆提示符：根据提示，输入用户名default后，将前面板钥匙由锁定位置拧到维护位置，按回车，等待5秒后，将钥匙由维护位置拧到锁定位置，敲回车，这样系统就进入XSCF提示符了。

（钥匙顺序也可以相反，即开始本来在维护位置，那么就拧到锁定，再由锁定到维护）节 1.02 2 添加用户及给机器加电Change the panel mode switch to Service and press return...Leave it in that position for at least 5 seconds. Change the panel mode switch to Locked, and press return...XSCF>adduser eis-installerXSCF> setprivileges eis-installer platadm useradm auditadm/*添加用户并设置权限*//*添加用户eis-installer并设置权限，主要是platadm useradm*/XSCF> showuser –l /*查看状态*/User Name: eis-installerUID: 100Status: EnabledMinimum: 0Maximum: 99999Warning: 7Inactive: -1Last Change: Dec 24, 2009Password Expires: NeverPassword Inactive: NeverAccount Expires: NeverPrivileges: useradmplatadmauditadmXSCF> password eis-installer/*修改密码,此M5000密码为admin123*/ New XSCF password:BAD PASSWORD: it is too shortRetype new XSCF password:Sorry, passwords do not matchNew XSCF password:BAD PASSWORD: it is based on a dictionary wordRetype new XSCF password:XSCF>XSCF>XSCF>XSCF>XSCF> exitlogoutlogin: eis-installerPassword:XSCF>XSCF>XSCF>XSCF>XSCF>showhardconf /*加电后的M5000用此条命令确认内部配置*/SPARC Enterprise M5000;+ Serial:BEF0949C90; Operator_Panel_Switch:Locked;+ Power_Supply_System:Single; SCF-ID:XSCF#0;+ System_Power:Off; System_Phase:Cabinet Power Off;Domain#0 Domain_Status:Powered Off;MBU_B Status:Normal; Ver:0201h; Serial:BE0948104A ;+ FRU-Part-Number:CF00541-0478 08 /541-0478-08 ;+ Memory_Size:32 GB;CPUM#0-CHIP#0 Status:Normal; Ver:0401h; Serial:PP094605MN ;+ FRU-Part-Number:CA06761-D202 E1 /375-3568-05 ;+ Freq:2.400 GHz; Type:32;+ Core:4; Strand:2;CPUM#0-CHIP#1 Status:Normal; Ver:0401h; Serial:PP094605MN ;+ FRU-Part-Number:CA06761-D202 E1 /375-3568-05 ;+ Freq:2.400 GHz; Type:32;+ Core:4; Strand:2;CPUM#1-CHIP#0 Status:Normal; Ver:0401h; Serial:PP0946056Q ;+ FRU-Part-Number:CA06761-D202 E1 /375-3568-05 ;+ Freq:2.400 GHz; Type:32;+ Core:4; Strand:2;CPUM#1-CHIP#1 Status:Normal; Ver:0401h; Serial:PP0946056Q ;+ FRU-Part-Number:CA06761-D202 E1 /375-3568-05 ;+ Freq:2.400 GHz; Type:32;+ Core:4; Strand:2;MEMB#0 Status:Normal; Ver:0101h; Serial:BF0944FVV3 ;+ FRU-Part-Number:CF00541-0545 08 /541-0545-08 ;MEM#0A Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-522563a9;+ Type:2A; Size:2 GB;MEM#0B Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-5225644f;+ Type:2A; Size:2 GB;MEM#1A Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-522563aa;+ Type:2A; Size:2 GB;MEM#1B Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-52256376;+ Type:2A; Size:2 GB;MEM#2A Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-522563fd;+ Type:2A; Size:2 GB;MEM#2B Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-52256377;+ Type:2A; Size:2 GB;MEM#3A Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-5225640a;+ Type:2A; Size:2 GB;MEM#3B Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-522563b7;+ Type:2A; Size:2 GB;MEMB#1 Status:Normal; Ver:0101h; Serial:BF0944FVVD ;+ FRU-Part-Number:CF00541-0545 08 /541-0545-08 ;MEM#0A Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-522551be;+ Type:2A; Size:2 GB;MEM#0B Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-522551bf;+ Type:2A; Size:2 GB;MEM#1A Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-52256405;+ Type:2A; Size:2 GB;MEM#1B Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-52256400;+ Type:2A; Size:2 GB;MEM#2A Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-522551ba;+ Type:2A; Size:2 GB;MEM#2B Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-522551bb;+ Type:2A; Size:2 GB;MEM#3A Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-522551b0;+ Type:2A; Size:2 GB;MEM#3B Status:Normal;+ Code:ce0000000000000001M3 93T5660QZA-CE6 4151-522551b9;+ Type:2A; Size:2 GB;DDC_A#0 Status:Normal;DDC_A#1 Status:Normal;DDC_A#2 Status:Normal;DDC_A#3 Status:Normal;DDC_B#0 Status:Normal;DDC_B#1 Status:Normal;IOU#0 Status:Normal; Ver:0101h; Serial:BF0941ENU2 ;+ FRU-Part-Number:CF00541-2240 05 /541-2240-05 ;DDC_A#0 Status:Normal;DDCR Status:Normal;DDC_B#0 Status:Normal;XSCFU Status:Normal,Active; Ver:0101h; Serial:BF0941EM56 ;+ FRU-Part-Number:CF00541-0481 04 /541-0481-04 ;OPNL Status:Normal; Ver:0101h; Serial:BF0941EDBC ;+ FRU-Part-Number:CF00541-0850 06 /541-0850-06 ;PSU#0 Status:Normal; Serial:0017527-0940025271;+ FRU-Part-Number:CF00300-2011 0250 /300-2011-02-50;+ Power_Status:Off; AC:200 V;PSU#1 Status:Normal; Serial:0017527-0940025268;+ FRU-Part-Number:CF00300-2011 0250 /300-2011-02-50;+ Power_Status:Off; AC:200 V;PSU#2 Status:Normal; Serial:0017527-0940025267;+ FRU-Part-Number:CF00300-2011 0250 /300-2011-02-50;+ Power_Status:Off; AC:200 V;PSU#3 Status:Normal; Serial:0017527-0940025266;+ FRU-Part-Number:CF00300-2011 0250 /300-2011-02-50;+ Power_Status:Off; AC:200 V;FANBP_C Status:Normal; Ver:0501h; Serial:BF0940EA5H ;+ FRU-Part-Number:CF00541-3099 01 /541-3099-01 ;FAN_A#0 Status:Normal;FAN_A#1 Status:Normal;FAN_A#2 Status:Normal;FAN_A#3 Status:Normal;XSCF>settimezone -c settz -s Asia/Shanghai/*设置时区及时间，完成后重启XSCF*/ Asia/ShanghaiXSCF> showdateThu Dec 24 16:56:06 CST 2009XSCF>XSCF> setdscp/*设置管理网口IP地址DSCP network [0.0.0.0 ] > 192.168.0.0DSCP netmask [255.255.255.0 ] >XSCF address [192.168.0.1 ] > 192.168.0.3Domain #00 address [192.168.0.2 ] > 192.168.0.4Domain #01 address [192.168.0.3 ] > 192.168.0.5Domain #02 address [192.168.0.4 ] > 192.168.0.6Domain #03 address [192.168.0.5 ] > 192.168.0.7Commit these changes to the database? [y|n] : yXSCF>showdscpDSCP Configuration:Network: 192.168.0.0Netmask: 255.255.255.0Location Address---------- ---------XSCF 192.168.0.3Domain #00 192.168.0.4Domain #01 192.168.0.5Domain #02 192.168.0.6Domain #03 192.168.0.7XSCF> rebootxscfThe XSCF will be reset. Continue? [y|n] :yexecute K000endXSCF> -- completeexecute S10ioxoff -- completeDec 24 08:56:51 localhost XSCF[104]: XSCF shutdown sequence start execute K000end -- completeexecute K100end -- completeexecute K101end -- completeunmount /hcp0/linuxunmount /hcp0/scfprogunmount /hcp0/gendata -- completeunmount /hcp0/remcscm -- completeunmount /hcp1/linuxunmount /hcp1/scfprogunmount /hcp1/gendataunmount /hcp1/remcscmunmount /hcpcommon/setup -- completeunmount /hcpcommon/obp -- completeunmount /hcpcommon/tmp -- completeunmount /hcpcommon/varunmount /hcpcommon/scflog1 -- completeunmount /hcpcommon/scflog2 -- completeXSCF reset.Please stand by while rebooting the system.(15)Restarting system.XSCF uboot 01080001 (May 8 2009 - 15:09:36)XSCF uboot 01080001 (May 8 2009 - 15:09:36)SCF board boot factor = 4040DDR Real size: 256 MBDDR: 224 MB## Booting image at ff800000 ...Image Name: XSCF kernel 01090000 2.6.11.12-sImage Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1456903 Bytes = 1.4 MBLoad Address: 00000000Entry Point: 00000000Verifying Checksum ... OKUncompressing Kernel Image ... OK## Loading RAMDisk Image at ff980000 ...Image Name: XSCF rootfs 01090000 ,2009/07/30Image Type: PowerPC Linux RAMDisk Image (gzip compressed)Data Size: 5457580 Bytes = 5.2 MBLoad Address: 00000000Entry Point: 00000000Verifying Checksum ... OKLoading Ramdisk to 0bacb000, end 0bfff6ac ... OKLinux version 2.6.11.12-sec (gcc version 3.4.4) #1 Thu Jul 30 14:14:57 JST 2009new message buffer at 0f700000 size 1048576log_buf_len: 1048576mpc85xx_cds_setup_archBuilt 1 zonelistsKernel command line: root=/dev/ram rw console=ttyS0,9600 init=/sbin/init_change_root panic=1 mem=240MOpenPIC Version 1.2 (1 CPUs and 44 IRQ sources) at fbe79000PID hash table entries: 1024 (order: 10, 16384 bytes)Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)Memory: 218752k available (2188k kernel code, 668k data, 316k init, 0k highmem)Mount-cache hash table entries: 512 (order: 0, 4096 bytes)Freeing initrd memory: 5329k freedRAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksizei2c-algo-cpm: CPM2 I2C algorithm module version 0.1 (Mar 22, 2005)FCC ENET Version 0.3TCP established hash table entries: 8192 (order: 4, 65536 bytes)TCP bind hash table entries: 8192 (order: 3, 32768 bytes)ip_tables: (C) 2000-2002 Netfilter core teamarp_tables: (C) 2002 David S. MillerVFS: Mounted root (ext2 filesystem).Freeing unused kernel memory: 316k initswitching initrd filesystem, ramdisk to tmpfsSCF Linux Boot Script 2006/03/04 for ROM boot environmentfsl-sec2 hardware crypt accelerator model3a ver 0.02 enabledXSCF initial process start (pid=104)load /scf/modules/lites_ldrv.ko -- completeload /scf/modules/drvscftrace.ko -- completeload /scf/modules/sec2_rsa.ko -- completeload /scf/modules/sec2_md5.ko -- completeload /scf/modules/sec2_des.ko -- completeload /scf/modules/sec2_arc4.ko -- completeload /scf/modules/sec2_aes.ko -- completeload /scf/modules/sec2_sha256.ko -- completeload /scf/modules/sec2_sha1.ko -- completeload /scf/modules/hw_random.ko -- completeload /scf/modules/scsi_mod.ko -- completeload /scf/modules/sd_mod.ko -- completeload /scf/modules/usbcore.ko -- completeload /scf/modules/ohci-hcd.ko -- completeload /scf/modules/usb-storage.ko -- completeload /scf/modules/drvbootfmem.ko -- completeload /scf/modules/drvmbc.ko -- completeload /scf/modules/drvnand.ko -- completeload /scf/modules/drvffc.ko -- completeload /scf/modules/drvffcint.ko -- completeload /scf/modules/drvrtc.ko -- completeload /scf/modules/drvxscfuart.ko -- completeload /scf/modules/drvrci.ko -- completeload /scf/modules/drvtimer.ko -- completeload /scf/modules/drvsdic.ko -- completeload /scf/modules/sm2s.ko -- completeload /scf/modules/spkmdrv.ko -- completemount /dev/mtdblock0 -> /hcp0/linux -- completemount /dev/mtdblock1 -> /hcp0/scfprog -- completemount /dev/mtdblock2 -> /hcp0/gendata -- completemount /dev/mtdblock3 -> /hcp0/remcscm -- completemount /dev/mtdblock4 -> /hcpcommon/setup -- complete mount /dev/mtdblock5 -> /hcpcommon/obp -- completemount /dev/mtdblock6 -> /hcpcommon/tmp -- completemount /dev/mtdblock11 -> /hcpcommon/var -- completemount /dev/mtdblock12 -> /hcpcommon/scflog1 -- complete mount /dev/mtdblock13 -> /hcpcommon/scflog2 -- complete execute S00mtab -- completeexecute S00portmap -- completeexecute S00tmpmake -- completeexecute S00varclean -- completeexecute S10ldconfig -- completeexecute S15last_dmesg -- completeexecute S20cfgcreate -- completeexecute S50iptables -- completeexecute S60check -- completeexecute S61restore -- completeexecute S99syslogd -- completeinitialize XSCF common database (STANDALONE) -- complete start /scf/sbin/dbs (pid=302)start /scf/sbin/ksyseventd (pid=303)start /scf/init/scf_cmgrd (pid=323)start /scf/init/scf_coremgr (pid=324)start /scf/init/dualprocess (pid=325)check SCF operation mode (for OPNL access) -- complete initialize OPNL -- completecheck SCF operation mode -- complete (ACTIVE)start /scf/sbin/dbs (pid=337)initialize XSCF common database (OWN) -- complete synchronize setup data (XSCF -> OPNL) -- complete initialize XSCF common database (ACTIVE) -- complete wait for database synchronization -- completeexecute S00clis_all -- completeexecute S10restore_um -- completeexecute S11network.sh -- completeexecute S15ntpcheck.sh -- completeexecute S21daemons -- completeexecute S51scflog_SCFboot.sh -- completeexecute S82cod -- completeexecute S98bui -- completeexecute S00clis_active -- completeexecute S00cmem_check -- completeexecute S00tmp_login -- completeexecute S18restorefmdlog -- completeexecute S19setfmurl -- completeexecute S29setfmconf -- completeexecute S50setupSCFboot.sh -- completeexecute S83setservicetagdata -- completestart /scf/sbin/scf_panelmgr (pid=640)start /scf/sbin/auditd (pid=641)start /scf/sbin/cmd (pid=642)start /scf/sbin/cmd_sub (pid=643)start /scf/sbin/errhandd (pid=644)start /scf/sbin/fjdrd (pid=645)start /scf/sbin/frura (pid=646)start /scf/sbin/mond (pid=647)start /scf/sbin/mond (pid=648)start /scf/sbin/powerd (pid=649)start /scf/sbin/rci (pid=650)start /scf/sbin/rci_dual (pid=651)start /scf/sbin/reset (pid=652)start /scf/sbin/resetra (pid=653)start /scf/sbin/rsyncprocess (pid=654)start /scf/sbin/scf_firmup_exed (pid=655)start /scf/sbin/scf_loganalyze (pid=657)start /scf/sbin/scf_procmeas (pid=658)start /scf/sbin/sequence (pid=659)start /scf/sbin/ttyd (pid=660)start /scf/sbin/apcsd (pid=661)start /scf/sbin/codd (pid=662)start /scf/sbin/scf_firmup_ctld (pid=663)start /scf/sbin/fmd (pid=664)start /scf/sbin/dscpd (pid=722)start /scf/sbin/monitor_msg (pid=723)start /scf/sbin/picld (pid=724)start /scf/sbin/sunmcrund (pid=725)start /scf/sbin/stdiscoverer (pid=726)start /scf/sbin/stlistener (pid=727)start /scf/sbin/dfrud (pid=728)start /scf/sbin/iomgrd (pid=729)start /scf/sbin/archd (pid=772)wait for SCF_READY -- completeexecute S20setupSCFready.sh -- completeexecute S99rcclear -- completeexecute S10iobox_scan -- completeexecute S10restore_um -- completeexecute S84snmpd -- completeexecute S85sunmc_esd -- completeexecute S86limits -- completeexecute S87opnl -- completeexecute S99dr_recover.sh -- completeXSCF Initialize complete.Dec 24 17:01:03 localhost XSCF[104]: XSCF Initialize complete.login: eis-installerPassword:XSCF>XSCF> poweron -d 0DomainIDs to power on:00Continue? [y|n] :y00 :Powering on*Note*This command only issues the instruction to power-on.The result of the instruction can be checked by the "showlogs power".XSCF>console -d 0Connect to DomainID 0?[y|n] :yPOST Sequence 01 CPU CheckPOST Sequence 02 BannerLSB#00 (XSB#00-0): POST 2.11.0 (2009/06/18 09:29)POST Sequence 03 Fatal CheckPOST Sequence 04 CPU RegisterPOST Sequence 05 STICKPOST Sequence 06 MMUPOST Sequence 07 Memory InitializePOST Sequence 08 MemoryPOST Sequence 09 Raw UE In CachePOST Sequence 0A Floating Point UnitPOST Sequence 0B SCPOST Sequence 0C Cacheable InstructionPOST Sequence 0D SoftintPOST Sequence 0E CPU Cross CallPOST Sequence 0F CMU-CHPOST Sequence 10 PCI-CHPOST Sequence 11 Master DevicePOST Sequence 12 DSCPPOST Sequence 13 SC Check Before STICK DiagPOST Sequence 14 STICK StopPOST Sequence 15 STICK StartPOST Sequence 16 Error CPU CheckPOST Sequence 17 System ConfigurationPOST Sequence 18 System Status CheckPOST Sequence 19 System Status Check After SyncPOST Sequence 1A OpenBoot Start...POST Sequence Complete.Sun SPARC Enterprise M5000 Server, using Domain consoleCopyright 2009 Sun Microsystems, Inc. All rights reserved.Copyright 2009 Sun Microsystems, Inc. and Fujitsu Limited. All rights reserved. OpenBoot 4.24.11, 32768 MB memory installed, Serial #88430282.Ethernet address 0:21:28:45:56:ca, Host ID: 854556ca.Dec 24 17:04:44 localhost dscpd[722]: Failed to start DSCP for domain0 (error=2) Boot device: disk File and args:SunOS Release 5.10 Version Generic_141414-10 64-bitCopyright 1983-2009 Sun Microsystems, Inc. All rights reserved.Use is subject to license terms.二、安装系统在OK模式下从光盘启动{12} ok{12} ok boot cdrom /*进入OK模式下，通过cdrom启动*/ Resetting...POST Sequence 01 CPU CheckPOST Sequence 02 BannerLSB#00 (XSB#00-0): POST 2.11.0 (2009/06/18 09:29)POST Sequence 03 Fatal CheckPOST Sequence 04 CPU RegisterPOST Sequence 05 STICKPOST Sequence 06 MMUPOST Sequence 07 Memory InitializePOST Sequence 08 MemoryPOST Sequence 09 Raw UE In CachePOST Sequence 0A Floating Point UnitPOST Sequence 0B SCPOST Sequence 0C Cacheable InstructionPOST Sequence 0D SoftintPOST Sequence 0E CPU Cross CallPOST Sequence 0F CMU-CHPOST Sequence 10 PCI-CHPOST Sequence 11 Master DevicePOST Sequence 12 DSCPPOST Sequence 13 SC Check Before STICK DiagPOST Sequence 14 STICK StopPOST Sequence 15 STICK StartPOST Sequence 16 Error CPU CheckPOST Sequence 17 System ConfigurationPOST Sequence 18 System Status CheckPOST Sequence 19 System Status Check After SyncPOST Sequence 1A OpenBoot Start...POST Sequence Complete.Sun SPARC Enterprise M5000 Server, using Domain consoleCopyright 2009 Sun Microsystems, Inc. All rights reserved.Copyright 2009 Sun Microsystems, Inc. and Fujitsu Limited. All rights reserved. OpenBoot 4.24.11, 32768 MB memory installed, Serial #88430282.Ethernet address 0:21:28:45:56:ca, Host ID: 854556ca.Dec 25 08:42:34 localhost dscpd[724]: Failed to start DSCP for domain0 (error=2) Rebooting with command: boot cdromBoot device: /pci@0,600000/pci@0/pci@8/pci@0/scsi@1/disk@3,0:f File and args: SunOS Release 5.10 Version Generic_139555-08 64-bitCopyright 1983-2009 Sun Microsystems, Inc. All rights reserved.Use is subject to license terms.Configuring devices.Using RPC Bootparams for network configuration information.Attempting to configure interface e1000g1...Skipped interface e1000g1Attempting to configure interface e1000g0...Skipped interface e1000g0Attempting to configure interface bge1...Skipped interface bge1Attempting to configure interface bge0...Skipped interface bge0Reading ZFS config: done.Setting up Java. Please wait...Serial console, reverting to text installBeginning system identification...Searching for configuration file(s)...Search complete.Discovering additional network configuration...Select a Language /*选择语言*/0. English1. French2. German3. Italian4. Japanese5. Korean6. Simplified Chinese7. Spanish8. Swedish9. Traditional ChinesePlease make a choice (0 - 9), or press h or ? for help: 0 /*选择0，英文*/Select a Locale /*选择本地语言*/0. English (C - 7-bit ASCII)1. Albania (ISO8859-2)2. Australia (ISO8859-1)3. Belgium-Flemish (ISO8859-1)4. Belgium-Flemish (ISO8859-15 - Euro)5. Bosnia (ISO8859-2)6. Brazil (ISO8859-1)7. Brazil (UTF-8)8. Bulgaria (ISO8859-5)9. Canada-English (ISO8859-1)10. Catalan, Spain (ISO8859-1)11. Catalan, Spain (ISO8859-15 - Euro)12. Croatia (ISO8859-2)13. Czech Republic (ISO8859-2)14. Czech Republic (UTF-8 + euro)15. Czech Republic (UTF-8)16. Denmark (ISO8859-1)17. Denmark (ISO8859-15 - Euro)18. Egypt (ISO8859-6)Press Return to show more choices.Please make a choice (0 - 63), or press h or ? for help: 0 /*选择0英文*/What type of terminal are you using? /*使用的终端类型*/1) ANSI Standard CRT2) DEC VT523) DEC VT1004) Heathkit 195) Lear Siegler ADM316) PC Console7) Sun Command Tool8) Sun Workstation9) Televideo 91010) Televideo 92511) Wyse Model 5012) X Terminal Emulator (xterms)13) CDE Terminal Emulator (dtterm)14) OtherType the number of your choice and press Return: 3 /*选择3，DEC VT100*/Completing system identification...in.rdisc: No interfaces upq The Solaris Installation Program qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqThe Solaris installation program is divided into a series of short sectionswhere you'll be prompted to provide information for the installation. Atthe end of each section, you'll be able to change the selections you'vemade before continuing.About navigation...- The mouse cannot be used- If your keyboard does not have function keys, or they do notrespond, press ESC; the legend at the bottom of the screen qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq q/*以上提示告诉安装人员，Solaris的安装分好几个部分，每一部分后面都要你进行确认，如果发现有错，可以更改你先前输入的信息。

Group550安装指导书江苏国税项目组目录一、设备环境安装要求 (3)1、硬件规格..........................................................................二、设备安装步骤 (3)1、 GROUP 550介绍-设备组成：.........................................................2、 GROUP 550介绍-背板连线示意：.....................................................3、实物展示..........................................................................4、物理连接..........................................................................三、加电测试 (13)1、设备开机..........................................................................2、电源指示灯状态....................................................................3、主屏幕显示状态....................................................................四、设备系统配置 (14)1、系统开机配置......................................................................2、遥控器操作方法....................................................................3、发起视频呼叫......................................................................按遥控器的数字界面输入对方的IP地址，然后点击遥控器的绿色拨打电话按键呼叫或选择屏幕中的拨打电话即可实现点对点通话.........................................................................................4、高级进阶设置......................................................................五、系统功能测试 (24)....................................................... 终端点对点呼叫是否能够联......................................................... 终端多点呼叫是否能够联...................................................... 终端输出内容画面是否为10....................................................... 终端画面和音频是否唇音同............................................................ 终端双流输入是否正六、设备常见故障处理 (25)1、遥控器的充电......................................................................2、设置预设位和调用..................................................................3、麦克风状态指示灯..................................................................4、发送双流..........................................................................5、故障诊断..........................................................................6、会议常见问题......................................................................7、系统维护..........................................................................一、设备环境安装要求1、硬件规格物理规格高度1U（4.394厘米）长度17．19英寸（43.688厘米）宽度10.23英寸（26.009厘米）重量最高3.38KG（公斤）电源交流电输入/范围电压范围：100-240VAC、60Hz。

Group550安装指导书江苏国税项目组目录一、设施环境安装要求............................................ 错误!不决义书签。

1、硬件规格..................................................... 错误!不决义书签。

2、网络需求.....................................................二、设施安装步骤................................................1、GROUP550介绍-设施组成：....................................2、GROUP550介绍-背板连线表示：................................3、实物显现.....................................................4、物理连结.....................................................三、加电测试....................................................1、设施开机.....................................................2、电源指示灯状态...............................................3、主屏幕显示状态...............................................四、设施系统配置................................................1、系统开机配置.................................................2、遥控器操作方法...............................................3、呼喊对方.....................................................4、高级进阶设置.................................................五、系统功能测试................................................1、终端点对点呼喊可否能够联通...................................2、终端多点呼喊可否能够联通.....................................3、终端输出内容画面可否为1080P.................................4、终端画面和音频可否唇音同步...................................5、终端双流输入可否正常.........................................六、设施常有故障办理............................................1、遥控器的充电.................................................2、设置预设位和调用.............................................3、麦克风状态指示灯.............................................4、双流的发送...................................................5、诊疗.........................................................6、会议常有问题.................................................7、系统保护..................................................... 错误!不决义书签。

Mac OS X 操作系统快速安装教程现在很多人喜欢用苹果电脑，轻巧方便，功能也强大，那么苹果电脑的Mac系统安装可能不太熟悉，尤其是第一次使用苹果电脑的小伙伴，那么如何快速的安装Mac OS X 操作系统，小编今天要向大家介绍的Mac OS X 操作系统安装方法。

安装步骤：1、将下载的Tiger-x86.tar.bz2解压，得到tiger-x86-flat.img文件(5.99G)，在我的P4 1.8上用了大约30分钟;2、将准备安装Mac OS X系统的硬盘接入系统，用Acronis Disk Director Suite删除塬来所有的分区，但是不要重新创建分区(我在几次创建分区后安装都遇到了MBR error无法启动，也许可以通过在磁盘后部创建一个逻辑分区，在前方预留一个很大未分配空间的方法解决，但是由于时间问题没有尝试，有兴趣的朋友可以安照这个思路试试看);3、将下载的dd for windows 3.0解压，得到dd.exe等文件，运行cmd进入命令提示符环境，输入以下命令dd --list你将得到一个连接到WinXP系统的所有磁盘的列表，格式为“\\?\Device\HarddiskX\*”，X代表你的硬盘的编号，一般你的系统主盘为Harddisk0，第二块硬盘为Harddisk1，*代表的是硬盘的分区等，其中DR0表示MBR，Partition1、2等分别表示硬盘上的分区，以下我们假设你准备将Mac OS X装入第二块硬盘，即Harddisk1;4、依旧在命令提示符环境下，输入dd bs=1M if=tiger-x86-flat.img of=\\?\Device\Harddisk1\DR0注意硬盘编号不要搞错，不然装错了硬盘可就没救了大概10分钟左右，整个映像文件就写入完毕了5、关机，将已经装入Mac OS X的硬盘设为主盘，启动，你就能看到华丽的Mac OS X系统了补充：系统常用维护技巧1，在“开始” 菜单中选择“控制面板” 选项，打开“控制面板” 窗口，单击“管理工具” 链接2，在打开的“管理工具” 窗口中双击“事件查看器” 图标3，接着会打开“事件查看器” 窗口4，在右侧窗格中的树状目录中选择需要查看的日志类型，如“事件查看器本地--Win日志--系统日志，在接着在中间的“系统” 列表中即查看到关于系统的事件日志5，双击日志名称，可以打开“事件属性” 对话框，切换到“常规” 选项卡，可以查看该日志的常规描述信息6，切换到“详细信息” 选项卡，可以查看该日志的详细信息7，打开“控制面板” 窗口，单击“操作中心” 链接，打开“操作中心” 窗口，展开“维护” 区域8，单击“查看可靠性历史记录” 链接，打开“可靠性监视程序” 主界面，如图所示，用户可以选择按天或者按周为时间单位来查看系统的稳定性曲线表，如果系统近日没出过什么状况，那么按周来查看会比较合适。