规则检查中英对照

一、综合词汇1、印制电路：printed circuit2、印制线路：printed wiring3、印制板：printed board4、印制板电路：printed circuit board (pcb)5、印制线路板：printed wiring board(pwb)6、印制元件：printed component7、印制接点：printed contact8、印制板装配：printed board assembly9、板：board10、单面印制板：single-sided printed board(ssb)11、双面印制板：double-sided printed board(dsb)12、多层印制板：mulitlayer printed board(mlb)13、多层印制电路板：mulitlayer printed circuit board14、多层印制线路板：mulitlayer prited wiring board15、刚性印制板：rigid printed board16、刚性单面印制板：rigid single-sided printed borad17、刚性双面印制板：rigid double-sided printed borad18、刚性多层印制板：rigid multilayer printed board19、挠性多层印制板：flexible multilayer printed board20、挠性印制板：flexible printed board21、挠性单面印制板：flexible single-sided printed board22、挠性双面印制板：flexible double-sided printed board23、挠性印制电路：flexible printed circuit (fpc)24、挠性印制线路：flexible printed wiring25、刚性印制板：flex-rigid printed board, rigid-flex printed board26、刚性双面印制板：flex-rigid double-sided printed board, rigid-flex double-sided printed27、刚性多层印制板：flex-rigid multilayer printed board, rigid-flex multilayer printed board28、齐平印制板：flush printed board29、金属芯印制板：metal core printed board30、金属基印制板：metal base printed board31、多重布线印制板：mulit-wiring printed board32、陶瓷印制板：ceramic substrate printed board33、导电胶印制板：electroconductive paste printed board34、模塑电路板：molded circuit board35、模压印制板：stamped printed wiring board36、顺序层压多层印制板：sequentially-laminated mulitlayer37、散线印制板：discrete wiring board38、微线印制板：micro wire board39、积层印制板：buile-up printed board40、积层多层印制板：build-up mulitlayer printed board (bum)41、积层挠印制板：build-up flexible printed board42、表面层合电路板：surface laminar circuit (slc)43、埋入凸块连印制板：b2it printed board44、多层膜基板：multi-layered film substrate(mfs)45、层间全内导通多层印制板：alivh multilayer printed board46、载芯片板：chip on board (cob)47、埋电阻板：buried resistance board48、母板：mother board49、子板：daughter board50、背板：backplane51、裸板：bare board52、键盘板夹心板：copper-invar-copper board53、动态挠性板：dynamic flex board54、静态挠性板：static flex board55、可断拼板：break-away planel56、电缆：cable57、挠性扁平电缆：flexible flat cable (ffc)58、薄膜开关：membrane switch59、混合电路：hybrid circuit60、厚膜：thick film61、厚膜电路：thick film circuit62、薄膜：thin film63、薄膜混合电路：thin film hybrid circuit64、互连：interconnection65、导线：conductor trace line66、齐平导线：flush conductor67、传输线：transmission line68、跨交：crossover69、板边插头：edge-board contact70、增强板：stiffener71、基底：substrate72、基板面：real estate73、导线面：conductor side74、元件面：component side75、焊接面：solder side76、印制：printing77、网格：grid78、图形：pattern79、导电图形：conductive pattern80、非导电图形：non-conductive pattern81、字符：legend82、标志：mark二、基材：1、基材：base material2、层压板：laminate3、覆金属箔基材：metal-clad bade material4、覆铜箔层压板：copper-clad laminate (ccl)5、单面覆铜箔层压板：single-sided copper-clad laminate6、双面覆铜箔层压板：double-sided copper-clad laminate7、复合层压板：composite laminate8、薄层压板：thin laminate9、金属芯覆铜箔层压板：metal core copper-clad laminate10、金属基覆铜层压板：metal base copper-clad laminate11、挠性覆铜箔绝缘薄膜：flexible copper-clad dielectric film12、基体材料：basis material13、预浸材料：prepreg14、粘结片：bonding sheet15、预浸粘结片：preimpregnated bonding sheer16、环氧玻璃基板：epoxy glass substrate17、加成法用层压板：laminate for additive process18、预制内层覆箔板：mass lamination panel19、内层芯板：core material20、催化板材：catalyzed board ,coated catalyzed laminate21、涂胶催化层压板：adhesive-coated catalyzed laminate22、涂胶无催层压板：adhesive-coated uncatalyzed laminate23、粘结层：bonding layer24、粘结膜：film adhesive25、涂胶粘剂绝缘薄膜：adhesive coated dielectric film26、无支撑胶粘剂膜：unsupported adhesive film27、覆盖层：cover layer (cover lay)28、增强板材：stiffener material29、铜箔面：copper-clad surface30、去铜箔面：foil removal surface31、层压板面：unclad laminate surface32、基膜面：base film surface33、胶粘剂面：adhesive faec34、原始光洁面：plate finish35、粗面：matt finish36、纵向：length wise direction37、模向：cross wise direction38、剪切板：cut to size panel39、酚醛纸质覆铜箔板：phenolic cellulose paper copper-clad laminates(phenolic/paper ccl)40、环氧纸质覆铜箔板：epoxide cellulose paper copper-clad laminates (epoxy/paper ccl)41、环氧玻璃布基覆铜箔板：epoxide woven glass fabric copper-clad laminates42、环氧玻璃布纸复合覆铜箔板：epoxide cellulose paper core, glass cloth surfaces copper-clad laminates43、环氧玻璃布玻璃纤维复合覆铜箔板：epoxide non woven/woven glass reinforced copper-clad laminates44、聚酯玻璃布覆铜箔板：ployester woven glass fabric copper-clad laminates45、聚酰亚胺玻璃布覆铜箔板：polyimide woven glass fabric copper-clad laminates46、双马来酰亚胺三嗪环氧玻璃布覆铜箔板：bismaleimide/triazine/epoxide woven glass fabric copper-clad lamim ates47、环氧合成纤维布覆铜箔板：epoxide synthetic fiber fabric copper-clad laminates48、聚四乙烯玻璃纤维覆铜箔板：teflon/fiber glass copper-clad laminates49、超薄型层压板：ultra thin laminate50、陶瓷基覆铜箔板：ceramics base copper-clad laminates51、紫外线阻挡型覆铜箔板：uv blocking copper-clad laminates三、基材的材料1、 a阶树脂：a-stage resin2、 b阶树脂：b-stage resin3、 c阶树脂：c-stage resin4、环氧树脂：epoxy resin5、酚醛树脂：phenolic resin6、聚酯树脂：polyester resin7、聚酰亚胺树脂：polyimide resin8、双马来酰亚胺三嗪树脂：bismaleimide-triazine resin9、丙烯酸树脂：acrylic resin10、三聚氰胺甲醛树脂：melamine formaldehyde resin11、多官能环氧树脂：polyfunctional epoxy resin12、溴化环氧树脂：brominated epoxy resin13、环氧酚醛：epoxy novolac14、氟树脂：fluroresin15、硅树脂：silicone resin16、硅烷：silane17、聚合物：polymer18、无定形聚合物：amorphous polymer19、结晶现象：crystalline polamer20、双晶现象：dimorphism21、共聚物：copolymer22、合成树脂：synthetic23、热固性树脂：thermosetting resin24、热塑性树脂：thermoplastic resin25、感光性树脂：photosensitive resin26、环氧当量：weight per epoxy equivalent (wpe)27、环氧值：epoxy value28、双氰胺：dicyandiamide29、粘结剂：binder30、胶粘剂：adesive31、固化剂：curing agent32、阻燃剂：flame retardant33、遮光剂：opaquer34、增塑剂：plasticizers35、不饱和聚酯：unsatuiated polyester36、聚酯薄膜：polyester37、聚酰亚胺薄膜：polyimide film (pi)38、聚四氟乙烯：polytetrafluoetylene (ptfe)39、聚全氟乙烯丙烯薄膜：perfluorinated ethylene-propylene copolymer film (fep)40、增强材料：reinforcing material41、玻璃纤维：glass fiber42、 e玻璃纤维：e-glass fibre43、 d玻璃纤维：d-glass fibre44、 s玻璃纤维：s-glass fibre45、玻璃布：glass fabric46、非织布：non-woven fabric47、玻璃纤维垫：glass mats48、纱线：yarn49、单丝：filament50、绞股：strand51、纬纱：weft yarn52、经纱：warp yarn53、但尼尔：denier54、经向：warp-wise55、纬向：weft-wise, filling-wise56、织物经纬密度：thread count57、织物组织：weave structure58、平纹组织：plain structure59、坏布：grey fabric60、稀松织物：woven scrim61、弓纬：bow of weave62、断经：end missing63、缺纬：mis-picks64、纬斜：bias65、折痕：crease66、云织：waviness67、鱼眼：fish eye68、毛圈长：feather length69、厚薄段：mark70、裂缝：split71、捻度：twist of yarn72、浸润剂含量：size content73、浸润剂残留量：size residue74、处理剂含量：finish level75、浸润剂：size76、偶联剂：couplint agent77、处理织物：finished fabric78、聚酰胺纤维：polyarmide fiber79、聚酯纤维非织布：non-woven polyester fabric80、浸渍绝缘纵纸：impregnating insulation paper81、聚芳酰胺纤维纸：aromatic polyamide paper82、断裂长：breaking length83、吸水高度：height of capillary rise84、湿强度保留率：wet strength retention85、白度：whitenness86、陶瓷：ceramics87、导电箔：conductive foil88、铜箔：copper foil89、电解铜箔：electrodeposited copper foil (ed copper foil)90、压延铜箔：rolled copper foil91、退火铜箔：annealed copper foil92、压延退火铜箔：rolled annealed copper foil (ra copper foil)93、薄铜箔：thin copper foil94、涂胶铜箔：adhesive coated foil95、涂胶脂铜箔：resin coated copper foil (rcc)96、复合金属箔：composite metallic material97、载体箔：carrier foil98、殷瓦：invar99、箔（剖面）轮廓：foil profile100、光面：shiny side101、粗糙面：matte side102、处理面：treated side103、防锈处理：stain proofing104、双面处理铜箔：double treated foil四、设计1、原理图：shematic diagram2、逻辑图：logic diagram3、印制线路布设：printed wire layout4、布设总图：master drawing5、可制造性设计：design-for-manufacturability6、计算机辅助设计：computer-aided design.(cad)7、计算机辅助制造：computer-aided manufacturing.(cam)8、计算机集成制造：computer integrat manufacturing.(cim)9、计算机辅助工程：computer-aided engineering.(cae)10、计算机辅助测试：computer-aided test.(cat)11、电子设计自动化：electric design automation .(eda)12、工程设计自动化：engineering design automaton .(eda2)13、组装设计自动化：assembly aided architectural design. (aaad)14、计算机辅助制图：computer aided drawing15、计算机控制显示：computer controlled display .(ccd)16、布局：placement17、布线：routing18、布图设计：layout19、重布：rerouting20、模拟：simulation21、逻辑模拟：logic simulation22、电路模拟：circit simulation23、时序模拟：timing simulation24、模块化：modularization25、布线完成率：layout effeciency26、机器描述格式：machine descriptionm format .(mdf)27、机器描述格式数据库：mdf databse28、设计数据库：design database29、设计原点：design origin30、优化（设计）：optimization (design)31、供设计优化坐标轴：predominant axis32、表格原点：table origin33、镜像：mirroring34、驱动文件：drive file35、中间文件：intermediate file36、制造文件：manufacturing documentation37、队列支撑数据库：queue support database38、元件安置：component positioning39、图形显示：graphics dispaly40、比例因子：scaling factor41、扫描填充：scan filling42、矩形填充：rectangle filling43、填充域：region filling44、实体设计：physical design45、逻辑设计：logic design46、逻辑电路：logic circuit47、层次设计：hierarchical design48、自顶向下设计：top-down design49、自底向上设计：bottom-up design50、线网：net51、数字化：digitzing52、设计规则检查：design rule checking53、走（布）线器：router (cad)54、网络表：net list55、计算机辅助电路分析：computer-aided circuit analysis56、子线网：subnet57、目标函数：objective function58、设计后处理：post design processing (pdp)59、交互式制图设计：interactive drawing design60、费用矩阵：cost metrix61、工程图：engineering drawing62、方块框图：block diagram63、迷宫：moze64、元件密度：component density65、巡回售货员问题：traveling salesman problem66、自由度：degrees freedom67、入度：out going degree68、出度：incoming degree69、曼哈顿距离：manhatton distance70、欧几里德距离：euclidean distance71、网络：network72、阵列：array73、段：segment74、逻辑：logic75、逻辑设计自动化：logic design automation76、分线：separated time77、分层：separated layer78、定顺序：definite sequence五、形状与尺寸：1、导线（通道）：conduction (track)2、导线（体）宽度：conductor width3、导线距离：conductor spacing4、导线层：conductor layer5、导线宽度/间距：conductor line/space6、第一导线层：conductor layer no.17、圆形盘：round pad8、方形盘：square pad9、菱形盘：diamond pad10、长方形焊盘：oblong pad11、子弹形盘：bullet pad12、泪滴盘：teardrop pad13、雪人盘：snowman pad14、 v形盘：v-shaped pad15、环形盘：annular pad16、非圆形盘：non-circular pad17、隔离盘：isolation pad18、非功能连接盘：monfunctional pad19、偏置连接盘：offset land20、腹（背）裸盘：back-bard land21、盘址：anchoring spaur22、连接盘图形：land pattern23、连接盘网格阵列：land grid array24、孔环：annular ring25、元件孔：component hole26、安装孔：mounting hole27、支撑孔：supported hole28、非支撑孔：unsupported hole29、导通孔：via30、镀通孔：plated through hole (pth)31、余隙孔：access hole32、盲孔：blind via (hole)33、埋孔：buried via hole34、埋/盲孔：buried /blind via35、任意层内部导通孔：any layer inner via hole (alivh)36、全部钻孔：all drilled hole37、定位孔：toaling hole38、无连接盘孔：landless hole39、中间孔：interstitial hole40、无连接盘导通孔：landless via hole41、引导孔：pilot hole42、端接全隙孔：terminal clearomee hole43、准表面间镀覆孔：quasi-interfacing plated-through hole44、准尺寸孔：dimensioned hole45、在连接盘中导通孔：via-in-pad46、孔位：hole location47、孔密度：hole density48、孔图：hole pattern49、钻孔图：drill drawing50、装配图：assembly drawing51、印制板组装图：printed board assembly drawing52、参考基准：datum referance。

车辆标准规范中英文对照车辆综合1 GB 1495-1979 机动车辆允许噪声Permissible noise limit emitted by power-driven vehicles2 GB/T 1496-1979 机动车辆噪声测量方法Measuring method for noise of power-driven vehicles3 GB/T 3730.1-1988 汽车和半挂车的术语和定义车辆类型Motor vehicle and semi-trailer-type-terms and definitions4 GB/T 3730.2-1996 道路车辆质量词汇和代码Road vehicle--Masses--Vocabulary and codes5 GB/T 3730.3-1992 汽车和挂车的术语及其定义车辆尺寸Motor vehicles and towed vehicles—Dimensions of vehicles—Terms and definitions6 GB 4094-1994 汽车操纵件、指示器及信号装置的标志Motor vehicles--Symbols for controls,indicators and tell-tales7 GB/T 4782-1984 道路车辆--操纵件、指示器及信号装置--词汇Road vehicles--Controls, indicators and tell-tales--Vocabulary8 GB/T 4970-1996 汽车平顺性随机输入行驶试验方法Method of random input running test--Automotive ride comfort9 GB/T 7031-1986 车辆振动输入路面平度表示方法Vehicle vibration--Describing method for road surface irregularity10 GB 8410-1994 汽车内饰材料的燃烧特性Flammability of automotive interior materials11 GB/T 9417-1988 汽车产品型号编号规则Motor vehicles-type and model designation12 GB/T 11551-1989 汽车乘员碰撞保护Motor vehicles—Occupant cash protection13 GB 11552-1989 汽车内部凸出物Motor vehicles—Internal protrusions14 GB 11553-1989 汽车正面碰撞时对燃油泄漏的规定Motor vehicles—Regulation of fuel leakage during frontal impact15 GB/T 11559-1989 汽车室内尺寸测量用三维H点装置Motor vehicles—Use in defining their seating accommodations—Three dimensional H point machine16 GB/T 11568-1989 汽车罩锁装置Motor vehicles—Hood latch system17 GB/T 12478-1990 客车防尘密封性试验方法Dust proof performance—Test method for buses18 GB/T 12480-1990 客车防雨密封性试验方法Rain proof performance test mothod for buses19 GB/T 12484-1990 客车车身术语Terms for the bus body20 GB/T 12534-1990 汽车道路试验方法通则Motor vehicles—General rules of road test method21 GB/T 12535-1990 汽车起动性能试验方法Motor vehicles—Starting performance—Test methods22 GB/T 12536-1990 汽车滑行试验方法Motor vehicles—Coastdown—Test method23 GB/T 12537-1990 汽车牵引性能试验方法Motor vehicles—Towing performance—Test method24 GB/T 12538-1990 汽车重心高度测定方法Motor vehicles—Height of gravity center—Measuring method25 GB/T 12539-1990 汽车爬陡坡试验方法Motor vehicles—Steep hill climbing—Test method26 GB/T 12540-1990 汽车最小转弯直径测定方法Motor vehicles—Minimum turning diameter—Method of measurment27 GB/T 12541-1990 汽车地形通过性试验方法Motor vehicles—Passing topography capacity—Test method28 GB/T 12542-1990 汽车发动机冷却系冷却能力道路试验方法Motor vehicles—Cooling capacity for engine cooling system—Test method on road29 GB/T 12543-1990 汽车加速性能试验方法Motor vehicles—Acceleration performance—Test method30 GB/T 12544-1990 汽车最高车速试验方法Motor vehicles—Maximum speed—Test method31 GB/T 12545-1990 汽车燃料消耗量试验方法Motor vehicles—Fuel consumption test method32 GB/T 12546-1990 汽车隔热通风试验方法Motor vehicles—Ventilation and heat insulation—Test method33 GB/T 12547-1990 汽车最低稳定车速试验方法Motor vehicles—Minimum stable speed—Test method34 GB/T 12549-1990 汽车操纵稳定性术语及其定义Automotive controllability and stability—Terms and definitions35 GB/T 12674-1990 汽车质量(重量)参数测定方法Motor vehicles—Weight parameter—Measuring method36 GB/T 12677-1990 汽车技术状况行驶检查方法Motor vehicles—Technical condition—Inspection method37 GB/T 12678-1990 汽车可靠性行驶试验方法Reliability running test method for automobiles38 GB/T 12679-1990 汽车耐久性行驶试验方法Motor vehicles—Durability running—Test method39 GB/T 13860-1992 地面车辆机械振动测量数据的表述方法Mechanical vibrations--Land vehicles-Method for reporting measured data40 GB/T 14168-1993 汽车制动液类别图形标志Motor vehicles--Graphical symbols to designate brake fluid types41 GB/T 14172-1993 汽车静侧翻稳定性台架试验方法Static roll stability test method for motor vehicles42 GB/T 15089-1994 机动车辆分类Motor vehicles--Classification43 GB 15740-1995 汽车防盗装置性能要求Motor vehicle--Protective devices against unauthorized use--Performance requirments44 GB/T 16735-1997 道路车辆车辆识别代号（VIN）位置与固定Road vehicles--Vehicle identification number(VIN)--Location and attachment45 GB/T 16736-1997 道路车辆车辆识别代号（VIN）内容与构成Road vehicles--Vehicle identification number(VIN)--Content and structure46 GB/T 16737-1997 道路车辆世界制造厂识别代号（WMI）Road vehicles--World manufacturer identifier(WMI)code47 GB/T 16738-1997 道路车辆世界零件制造厂识别代号（WPMI) Road vehicler--World parts manufacturer identifier(WPMI)code48 GB 7258-1997 机动车运行安全技术条件Safety specifications for motor vehicles operating on roads49 GB 13094-1997 客车结构安全要求The safety requirements for bus construction50 GB/T 16888-1997 客车安全顶窗The escape hatch of bus汽车发动机1 GB/T 5923-1986 汽车柴油机燃油滤清器的试验方法Test methods of fuel filters for automotive compression ignition engines2 GB/T 5924-1986 汽车柴油机燃油滤清器的试验值及分级Test values and classification of fuel filters for automotive compression ignition engines3 GB/T 12781-1991 汽车供油系气阻试验方法Motor vehicles—Vapor lock for fuel system—Test method4 GB/T 12782-1991 汽车采暖性能试验方法Motor vehicle—Heating performance—Test method5 GB/T 14169-1993 汽车空气滤清器接头A型和B型Air filter connections for motor vehicles--Types A and B6 GB/T 14170-1993 载货汽车空气滤清器滤芯尺寸规范Air filter elements for trucks--Dimensions7 GB/T 8409-1999 汽车发动机旋装式机油滤清器连接尺寸Road vehicles--Intermal combustion engines--Spin-on filters for lubrication oil--Dimension8 GB/T 17653-1999 汽车柴油机旋装式燃油滤清器安装和连接尺寸Road vehicles--Spin-on fuel filters for combustion-ignition engines--Mounting and dimensions9 GB/T 17692-1999 汽车用发动机净功率测试方法Measurement methods of net power for automotive engines汽车底盘与车身1 GB 1589-1989 汽车外廓尺寸限界Outside dimension limits of motor vehicles2 GB/T 2933-1995 充气轮胎用车轮和轮辋的术语、规格代号和标志Wheels/rims for pneumatic tyres--Nomenclature,designation and marking3 GB/T 3487-1996 汽车轮辋规格系列Rim contours for motor vehicles4 GB/T 4095-1995 载货汽车辐板式车轮在轮毂上的安装尺寸Disc wheels for trucks--Dimensional characteristics of attachment on hub5 GB/T 4784-1984 使用非石油基制动液的汽车液压制动软管总成Brake hose assemblies for hydraulic braking systems of motor vehicles used with a non-petroleum base hydrau-lic fluids6 GB/T 5334-1995 轿车钢制车轮性能要求和试验方法Performance requirements and test methods of passenger car steel wheels7 GB/T 5335-1985 汽车制动装置液压试验的连接器Automobile hydraulic pressure test connection for braking equipment8 GB/T 5345-1985 制动液容器的标记Labelling of containers for brake fluid9 GB/T 5620.1-1985 汽车和挂车制动名词术语及其定义制动系种类、组成、力学及现象The terms and definitions of braking of automotive vehicles and their trailers--Types,constituent elements,braking mechanics and phenomenon of braking system10 GB/T 5620.2-1985 汽车和挂车制动名词术语及其定义零部件The terms and definitions of braking of automotive vehicles and their trailers--The parts and components of braking equipment11 GB/T 5909-1995 载货汽车车轮性能要求和试验方法Performance requirements and test methods of truck wheels12 GB/T 5911-1986 转向盘尺寸Steering wheel--Dimensions13 GB/T 5921-1986 汽车和挂车气压制动系部件上接口的识别标记Motor vehicles and towed vehicles--Air braking systems--Identification of connections on units14 GB/T 5922-1986 汽车和挂车气压制动装置压力测试连接器Motor vehicles and towed vehicles--Pressure test connection for compressed-air pneumatic braking equipment15 GB/T 6792-1996 客车车身骨架应力、形变测量方法Measure method of stress and deformation for bus budy skeleton16 GB 7062-1986 汽车气制动软管总成Automotive air brake hose assemblies17 GB 7063-1994 汽车护轮板The wheel guards of motor vehicles18 GB/T 7680-1987 液力变矩器性能试验方法Hydrodynamic torque converter--Method of performance tests19 GB/T 10484-1989 汽车真空制动软管总成Vacuum brake hose assemblies for motor vehicle20 GB/T 11549-1989 汽车安全带总成性能要求和试验方法Motor vehicles—Safety belt assemblies—Performance requirements and test methods21 GB 11550-1995 汽车座椅头枕性能要求和试验方法Motor vehicles--Seats head vestraints--Performance requirements and test methods22 GB 11555-1994 汽车风窗玻璃除雾系统的性能要求及试验方法Motor vehicles--Windshield demisters--Performance requirements and test methods23 GB 11556-1994 汽车风窗玻璃除霜系统的性能要求及试验方法Motor vehicles--Windshield defrosters--Performance requirements and test methods24 GB/T 11558-1989 汽车安全带用卷收器性能要求和试验方法Motor vehicles—Retractors for safety belt—Performance requirements and test methods25 GB 11561-1989 汽车加速器控制系统的技术要求Motor vehicles—Accelerator control systems—Technical requirements26 GB 11562-1994 汽车驾驶员前方视野要求及测量方法Motor vehicles--Forward visibility for drivers--Requirements and measurement methods27 GB/T 11563-1995 汽车H点确定程序Motor vehicles--Procedure for H-point determination28 GB 11565-1989 轿车风窗玻璃刮水器刮刷面积Passenger cars—Windshield wipers—Wiped areas29 GB 11566-1995 轿车外部凸出物Passenger car--External protrusions30 GB 11567-1994 汽车和挂车侧面及后下部防护装置要求Motor vehicles and trailers--Lateral and underrun protections--Requirements31 GB/T 11611-1989 汽车液压制动系金属管、内外螺纹管接头和软管端部接头Motor vehicles—Hydraulic braking systems—Pipes tapped holes, male fittings and hose end fittings32 GB/T 12482-1990 客车侧窗平面玻璃规格系列Side window flat glasses systematization for buses33 GB/T 12483-1990 客车风窗、后窗玻璃规格系列Buses windscreen and rear window glass—Systematization34 GB/T 12673-1990 汽车主要尺寸测量方法Molor vehicles—Basic dimensions—Measuring method35 GB/T 12780-1991 货车、客车制动器台架试验方法Trucks and buses—Brake—Bench test methods36 GB/T 13051-1991 汽车机械式变速器动力输出孔连接尺寸Motor vehicles—Connections for PTO37 GB/T 13053-1991 客车驾驶区尺寸Bus driver compartment dimensions38 GB/T 13054-1991 客车驾驶区尺寸术语Bus driver compartment dimensions terms39 GB/T 13055-1991 客车乘客区尺寸Bus passenger compartment dimensions40 GB/T 13056-1991 客车乘客区尺寸术语Bus passenger compartment dimension terms41 GB/T 13057-1991 客车驾驶员座椅尺寸规格Bus driver seat—Dimensions42 GB/T 13058-1991 客车驾驶员座椅技术条件Bus drivers seat—Technical specification43 GB/T 13059-1991 客车乘客座椅尺寸规格Bus passenger seat—Dimensions44 GB/T 13060-1991 客车乘客座椅技术条件Bus passenger seat—Technical specifications45 GB/T 13061-1991 汽车悬架用空气弹簧橡胶气囊Air spring for automotive suspension—Rubber bellows46 GB 13594-1992 汽车防抱制动系统性能要求和试验方法Vehicles anti-lock braking systems performence requiremants and test procedures47 GB/T 13604-1992 汽车转向球接头尺寸Motor vehicles—Steering ball joints—Dimensions48 GB 14166-1993 汽车安全带性能要求和试验方法Motor vehicles--Safety belt assemblies--Performance requirements and test methods49 GB 14167-1993 汽车安全带安装固定点Motor vehicles--Safety belt anchorages50 GB/T 14171-1993 汽车气制动系管路螺纹孔和管接头外螺纹Motor vehicles--Pneumatic braking systems--Tapped holes and male fittings51 GB 15083-1994 汽车座椅系统强度要求及试验方法Motor vehicles--Seat systems--Strengthrequirements and test methods52 GB 15084-1994 汽车后视镜的性能和安装要求Motor vehicles--Rear view mirrors--Requirements of performance and installation53 GB 15085-1994 汽车风窗玻璃刮水器、洗涤器的性能要求及试验方法Motor vehicles--Windshield wipers and washer systems--Performance requirements and test methods54 GB 15086-1994 汽车门锁及门铰链的性能要求和试验方法Motor vehicles--Door locks and door hinges--Performance requirements and test methods55 GB/T 15087-1994 汽车牵引车与全挂车机械连接装置强度试验Motor vehicles--Drawbar couplings and eyes for hinged drawbars--Strength test56 GB/T 15088-1994 汽车半挂车牵引座牵引销强度试验Motor vehicles--Fifth wheel coupling pins--Strength test57 GB/T 15704-1995 轿车车轮冲击试验方法Passenger cars--Wheels--Impact test procedure58 GB/T 15705-1995 载货汽车驾驶员操作位置尺寸Trucks--Operating position demensions of driver59 GB 15741-1995 汽车和挂车号牌板(架)及其位置The license plates (crackets) and its position on motor vehicles and trailer60 GB 15743-1995 轿车侧门强度Passenger car--Strength of side doors61 GB 16897-1997 制动软管Brake hose62 GB/T 17346-1998 轿车脚踏板的侧向间距Passenger cars--Lateral spacing of foot controls63 GB 11557-1998 防止汽车转向机构对驾驶员伤害的规定The stipulation protecting drivers from being injured by motor vehicle steering mechanism64 GB/T 17351-1998 汽车车轮双轮中心距Dual spaeing of vechicle wheels65 GB 17354-1998 汽车前、后端保护装置Front and rear protective devices for passenger cars66 GB/T 17578-1998 客车上部结构强度的规定Provisions of strength for the Superstructure of bus67 GB 12676-1999 汽车制动系统结构、性能和试验方法Road vehicles-Braking systems-Structure performance and test methods68 GB 17675-1999 汽车转向系基本要求Steering system of motor vehicles-Basic requirements69 GB/T 17676-1999 天然气汽车和液化石油气汽车标志Natural gas vehicle and liquefied petroleum gas vehicle Identification marks车辆通用零部件1 GB/T 1359-1978 汽车与挂车气制动接头型式与尺寸Pneumatic brakes for motor vehicls and their trailers-couplings--Types and dimensions2 GB/T 7726.1-1998 铰接式客车机械连接装置术语Mechanical connections of articulated bus Glossary3 GB/T 7726.2-1998 铰接式客车机械连接装置技术要求Mechanical connections of articulated bus Technical requirements4 GB/T 7726.3-1998 铰接式客车机械连接装置球头销Mechanical connections of articulated bus Ball pin5 GB/T 7726.4-1998 铰接式客车机械连接装置球形衬套Mechanical connections of articulated bus Ball socket6 GB/T 7726.5-1998 铰接式客车机械连接装置伸缩篷Mechanical connections of articulated bus Telescopic tarpaulin车用电子、电气设备与仪表1 GB 4599-1994 汽车前照灯配光性能Photometric characteristics of headlamps for motor vehicles2 GB/T 4659-1984 汽车前照灯类型、主要尺寸和连接尺寸Type,main size and mounted dimension of headlamps for motor vehicle3 GB 4660-1994 汽车前雾灯配光性能Photometric characteristics of front fog lamps for motor vehicles4 GB/T 5053.1-1985 汽车与挂车之间24N 型电连接器Electrical connections between motor vehicles and towed vehicles--Type 24N5 GB/T 5053.2-1985 汽车与挂车之间12N 型电连接器Electrical connections between motor vehicles and towed vehicles--Type 12N6 GB/T 5053.3-1985 汽车与挂车之间电连接器的试验方法与要求Test methods and requirements of electrical connections between motor vehicles and towed vehicles7 GB/T 5054-1985 汽车与挂车的七芯电缆线Seven-core connecting cable of motor vehicles and towed vehicles8 GB/T 5337-1985 汽车电器、灯具和仪表名词术语Nomenclature and terminology for automotive electrical equipment, lighting and instrumentation9 GB 5920-1994 汽车前和后位(侧)灯、示廓灯和制动灯配光性能Photometric characteristics of front and rear position (side)lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers 10 GB/T 6784-1986 M10×1平座火花塞及其气缸盖安装孔Spark plug M10×1 with flat seating and cylinder head housing11 GB/T 6785-1986 M12×1.25 平座火花塞及其气缸盖安装孔Spark plug M12×1.25 with flat seating and cylinder head housing12 GB/T 6786-1986 M14×1.25 平座火花塞及其气缸盖安装孔Spark plug M14×1.25 with flat seating and cylinder head housing13 GB/T 6787-1986 M14×1.25 矮型平座火花塞及其气缸盖安装孔Compact spark plug M14×1.25 with flat seating and cylinder head housing14 GB/T 6788-1986 M14×1.25 矮型锥座火花塞及其气缸盖安装孔Compact spark plug M14×1.25 with conical seating and cylinder head housing15 GB/T 6789-1986 M14×1.25 锥座火花塞及其气缸盖安装孔Spark plug M14×1.25 with conical seating and cylinder head housing16 GB/T 6790-1986 M18×1.5 平座火花塞及其气缸盖安装孔Spark plug M18×1.5 with flat seating and cylinder head housing17 GB/T 6791-1986 M18×1.5 锥座火花塞及其气缸盖安装孔Spark plug M18×1.5 with conical seating and cylinder head housing18 GB/T 7360-1987 汽车与挂车照明和信号装置的工作电压及其测量Working voltages and their measurement for lights and lighting signal devices fitted to motor vehicles and towed vehicles19 GB/T 7825-1987 火花塞Spark plugs20 GB/T 10485-1989 汽车和挂车外部照明和信号装置基本环境试验Basic environmental testing of lighting and light signalling devices for motor vehicles and their trailers21 GB/T 12548-1990 汽车速度表、里程表检验校正方法Motor vehicles—Speedometer and odometer—Calibration method22 GB 15082-1994 汽车用车速表Motor vehicles--Speed meters23 GB 15235-1994 汽车倒车灯配光性能Photometric characteristics of reversing lamps for motor vehicles and their trailers24 GB 15742-1995 汽车电喇叭的性能要求及试验方法Automotive--Electric horn--Performance requirements and test methods25 GB/T 17348-1998 道路车辆会车光束倾斜角随载荷变化的测量Motor vehicle--Measurement of variations in dipped beam headlamp angle as a function of load26 GB/T 17349.1-1998 道路车辆汽车诊断系统词汇Road vehicles--Diagnostic systems for motor vehicles--Vocabulary27 GB/T 17349.2-1998 道路车辆汽车诊断系统图形符号Rord vehicle Diagnostic systym Graphical symbols28 GB 17509-1998 汽车和挂车转向信号灯配光性能Photometric characteristics of direction indicators for motor vehicles and their trailers29 GB 17510-1998 摩托车光信号装置配光性能Photometric characteristics of light-signalling devices for motorcycles30 GB 4785-1998 汽车及挂车外部照明和信号装置的安装规定Prescription for installation of the external lighting and light signalliug devices for motor vehicles and their trailers31 GB 11554-1998 汽车及挂车后雾灯配光性能Photometric characteristics of rear fog lamp for motor vehicles and their tralers32 GB 11564-1998 机动车回复反射器Retro refletor for motor vehicles33 GB 5948-1998 摩托车白炽丝光源前照灯配光性能Photometric characteristics of motocycle headlamps epuipped with filament light sources汽车1 GB/T 918.1-1989 道路车辆分类与代码机动车Classification and code for road vehicles—Motor vehicle2 GB/T 918.2-1989 道路车辆分类与代码非机动车Classification and code for road vehicles—Non-motor vehicle3 GB/T 1332-1991 载货汽车定型试验规程Trucks—Engineering approval evaluation program4 GB/T 1333-1977 汽车产品质量定期检查试验规程Test code for regular quality inspection of automobile products5 GB/T 4780-1984 载货汽车车身名词、术语Glossary of truck body6 GB/T 4971-1985 汽车平顺性名词术语和定义Terms and definitions--Automotive ride comfort7 GB/T 5902-1986 汽车平顺性脉冲输入行驶试验方法Method of pulse input running test--Automobile ridecomfort8 GB/T 6104-1985 机动工业车辆名词术语Powered industrial trucks--Terminology9 GB/T 6323.1-1994 汽车操纵稳定性试验方法蛇行试验Controllability and stability test procedure for automobiles--Pylon course slalom test10 GB/T 6323.2-1994 汽车操纵稳定性试验方法转向瞬态响应试验(转向盘转角阶跃输入) Eontrollability and stability test procedure for automobiles--Steering transient response test(Steering wheel angle step input)11 GB/T 6323.3-1994 汽车操纵稳定性试验方法转向瞬态响应试验(转向盘转角脉冲输入) Contorllability and stability test procedure for automobiles--Steering transient response test(Steering wheel angle pulse input)12 GB/T 6323.4-1994 汽车操纵稳定性试验方法转向回正性能试验Controllability and stability test procedure for automobiles--Returnability test13 GB/T 6323.5-1994 汽车操纵稳定性试验方法转向轻便性试验Controllability and stability test procedure for automobiles--Steering efforts test procedure14 GB/T 6323.6-1994 汽车操纵稳定性试验方法稳态回转试验Controllability and stability test procedurefor automobiles--Steady static circular test procedure15 GB/T 7361-1987 半挂牵引车的制动及电路连接位置Brake and electrical connection locations of semi-trailer towing vehicle16 GB/T 7362-1987 全挂牵引车和货车的制动及电路连接位置Brake and electrical connection locations of truck andtrailer-towing vehicle17 GB/T 11380-1989 客车车身涂层技术条件Technical requirement for bus body coating18 GB/T 11381-1989 客车顶部静载试验方法Method of static load test for bus top19 GB/T 11382-1989 客车前保险杠效能试验方法正面固定式障壁碰撞试验Effect test procedure of front bumper for bus--Head-on collision with fixed wall20 GB/T 11709-1989 客车产品质量定期检查试验规程The regulated inspecting test procedure for bus21 GB/T 12427-1990 客车产品系列型谱Series and spectrum of buses22 GB/T 12428-1990 客车装载质量计算方法Laden mass calculation of buses23 GB/T 12429-1990 客车车身二氧化碳气体保护焊焊接质量要求及检验方法The quality requirement and test method for the carbon-dioxide arc welding of coach-body24 GB/T 12430-1990 客车乘客扶手杆的固定件基本型式与规格尺寸Basic type and size of fixings for passenger hand-rails in buses25 GB/T 12431-1990 客车乘客扶手杆断面Sections of passengers hand-rails in buses26 GB/T 12432-1990 客车乘客门门泵技术条件Specification for passenger door cylinder of buses27 GB/T 12433-1990 客车乘客门门泵试验方法Testing method for passenger door cylinder of buses28 GB/T 12675-1990 微型货车出厂检验方法Test methods of inspection after production for mini-truck29 GB/T 13043-1991 客车定型试验规程Buses—Engineering approval evaluation program30 GB/T 13044-1991 轻型客车定型试验规程Light buses—Engineering approval evaluation program31 GB/T 13046-1991 轻型客车产品质量定期检查试验规程Testing regulations for light bus and light van periodical inspection32 GB/T 16887-1997 卧铺客车技术条件Specification for sleeper bus33 GB/T 5910-1998 轿车质量分布Passenger car Mass distribution34 GB/T 17347-1998 商用道路车辆尺寸代码Commercial road vehicles Dimensional codes专用汽车1 GB/T 9465.1-1988 高空作业车分类Aerial platform--Classification2 GB/T 9465.2-1988 高空作业车技术条件Aerial platform--Specification3 GB/T 9465.3-1988 高空作业车试验方法Test methods for aerial platform4 GB/T 12503-1995 电视机通用技术条件Generic specification for TV vans5 GB/T 17350-1998 专用汽车和专用半挂车术语和代号Terms and marks in special automobiles and semi-trailers拖拉机1 GB/T 1592-1986 农业拖拉机动力输出轴Power take-off for agricultural tractors2 GB/T 1593.1-1996 农业轮式拖拉机后置式三点悬挂装置第1部分: 1、2、3和4类Agricultural wheeled tractors--Rear-mounted three-point linkage--Part 1: Categories 1,2,3 and 43 GB/T 1593.2-1987 农用轮式拖拉机三点悬挂装置第二部分: 1N类Agricultural wheeled tractors--Three-point linkage--Part 2: CategorY 1 N4 GB/T 1593.3-1987 农业轮式拖拉机三点悬挂装置第三部分: 0 类Agricultural wheeled tractors--Three-point linkage--Part 3: Categories 05 GB 1593.4-1987 农用轮式拖拉机三点悬挂装置第四部分:0类Agricultural wheeled tractors--Three-point linkage--Part 4: Category 06 GB/T 2777-1992 农业拖拉机动力输出轴安全防护罩型式尺寸和强度要求Power take-off safety shield for agricultural tractors--Types, dimensions and strength specifications7 GB/T 2778-1992 农业拖拉机动力输出皮带轮圆周速度和宽度Power take-off pulley for agricultural tractors--Peripheral speed and width8 GB/T 2779-1992 拖拉机拖挂装置型式尺寸和安装要求Tractor's connective equipment for trailers--Types, dimensions and mounting requirements9 GB/T 2780-1992 农业拖拉机牵引装置型式尺寸和安装要求Darwbars for agricultural tractors--Types dimensions and mounting requirements10 GB/T 3373-1982 拖拉机和农业、林业机械用轮辋Rims for tractors,agricultural and forestry machines11 GB/T 3871.1-1993 农业轮式和履带拖拉机试验方法第1 部分通用要求Test methods for agricultural wheeled and tracklaying tractors--Part 1: General requirements12 GB/T 3871.2-1993 农业轮式和履带拖拉机试验方法第2 部分整机参数测定Test methods for agricultural wheeled and tracklaying tractors--Part 2: Measurements of tractor parameters13 GB/T 3871.3-1993 农业轮式和履带拖拉机试验方法第3 部分动力输出轴功率试验Test methods for agricultural wheeled and tracklaying tractors--Part 3: PTO power tests14 GB/T 3871.4-1993 农业轮式和履带拖拉机试验方法第4 部分液压提升能力和输出功率试验Test methods for agricultural wheeled and tracklaying tractors--Part 4: Hydraulic lifting capacity and power tests15 GB/T 3871.5-1993 农业轮式和履带拖拉机试验方法第5 部分转向和离合器操纵试验Test methods for agricultural wheeled and tracklaying tractors--Part 5: Turning and clutch operating tests16 GB/T 3871.6-1993 农业轮式和履带拖拉机试验方法第6 部分制动试验Test methods for agricultural wheeled and tracklaying tractors--Part 6: Braking tests17 GB/T 3871.7-1993 农业轮式和履带拖拉机试验方法第7 部分视野测定Test methods for agricultural wheeled and tracklaying tractors--Part 7: Measurements of operator's field vision18 GB/T 3871.8-1993 农业轮式和履带拖拉机试验方法第8 部分噪声测量Test methods for agricultural wheeled and tracklaying tractors--Part 8: Measurements of noise19 GB/T 3871.9-1993 农业轮式和履带拖拉机试验方法第9 部分牵引功率试验Test methods for agricultural wheeled and tracklaying tractors--Part 9: Drawbar power tests20 GB/T 3871.10-1993 农业轮式和履带拖拉机试验方法第10部分低温起动试验Test methods for agricultural wheeled and tracklaying tractors--Part 10: Low temperature starting tests21 GB/T 3871.11-1993 农业轮式和履带拖拉机试验方法第11部分高温适应性试验Test methods for agricultural wheeled and tracklaying tractors--Part 11: Suitability tests for hot atmosphere22 GB/T 3871.12-1993 农业轮式和履带拖拉机试验方法第12部分使用试验Test methods for agricultural wheeled and tracklaying tractors--Part 12: Working tests23 GB/T 4329-1984 农业拖拉机三点悬挂装置锁销尺寸Three-point-linkage for agricultural tractors--Dimensions of linch pins24 GB/T 6229-1995 手扶拖拉机试验方法Methods of test for walking tractor25 GB/T 6236-1986 农业拖拉机驾驶座标志点Agricultural tractors--Operator's seat index point26 GB/T 6238-1986 农业拖拉机驾驶室的门道、紧急出口与驾驶员的工作位置尺寸Agricultural tractors--Access, exit and the operator's workplace--Dimensions27 GB 6376-1995 拖拉机噪声限值Noise limitation for tractors28 GB/T 6960.1-1995 拖拉机术语整机Tractor terminology--Complete tractor29 GB/T 6960.2-1995 拖拉机术语传动系Tractor terminology--Transmission system30 GB/T 6960.3-1995 拖拉机术语制动系Tractor terminology--Braking system31 GB/T 6960.4-1995 拖拉机术语行走系Tractor terminology--Running gears and undercarriages32 GB/T 6960.5-1995 拖拉机术语转向系Tractor terminology--Steering system33 GB/T 6960.6-1995 拖拉机术语液压悬挂系及牵引、拖挂装置Tractor terminology--Hydraulic hitch system and drawbar, hook34 GB/T 6960.7-1995 拖拉机术语驾驶室、驾驶座和覆盖件Tractor terminology--Cab, seat and sheet metal35 GB/T 6960.8-1986 拖拉机名词术语第八部分履带行走系统Tractor terminology--Part 8: Endless track installation for track laying tractor36 GB/T 6961-1986 拖拉机动力输出轴和牵引装置的使用要求Operating requirements for tractor power take-off and drawbars37 GB/T 6972-1986 农业轮式拖拉机驾驶座振动的测量Agricultural wheeled tractors--Operator's seat--Measurement of trahsmitted vibration38 GB/T 7120-1986 农用轮式拖拉机三点悬挂农具快速挂接器3N类Three-Point hitch implement quick-attaching coupler of agricultural wheeled tractors--Category 3N39 GB 7121-1986 农林轮式拖拉机防护装置强度试验方法和验收条件Agricultural and forestry wheeled tractors--Protective structures--Test method in the strength and acceptance conditions40 GB/T 7927-1987 手扶拖拉机振动测量方法Method of measurement for walking tractor vibration41 GB/T 8421-1987 农业轮式拖拉机驾驶座传递振动的评价指标Agricultural wheeled tractors--Operator seat--Evaluation criteria of transmitted vibration42 GB/T 10176-1988 手扶拖拉机牵引装置和动力输出皮带轮Walking tractors--Drawbar and pulley of power take off43 GB/T 10910-1989 农业轮式拖拉机驾驶员全身振动的测量Agricultural wheeled tractors—Measurement of whole-body vibration of the operator44 GB/T 10911-1989 农业轮式拖拉机和后悬挂农具的匹配Matching of agricultural wheeled tractors and rear mounted implements45 GB/T 10916-1989 农业轮式拖拉机前悬挂装置第一部分: 1、2类Agricultural wheeled tractors—Front-mounted linkage —Part 1: Category 1, 246 GB/T 10917-1989 农用轮式拖拉机前置动力输出轴Front-mounted power take-off for agricultural wheeled tractors47 GB/T 13875-1992 手扶拖拉机通用技术条件The general specification for walking tractors48 GB/T 13876-1992 农业轮式拖拉机驾驶员全身振动的评价指标Agricultural wheeled tractors--Evaluation criteria of whole body vibration of the operator49 GB/T 13877-1992 农业拖拉机和自走式机具密封驾驶室加压系统试验方法Agricultural tractors and self-propelled machines--Test method for enclosure pressurization systems50 GB/T 13878-1992 农业拖拉机和自走式机具封闭驾驶室采暖和通风系统性能试验方法Agricultural tractors and self-propelled machines--Performance of heating and ventilation systems in closed cabs--Method of test51 GB/T 14226-1993 草坪和园艺拖拉机三点悬挂装置Lawn and garden tractors--Three-point hitch52 GB/T 14785-1993 拖拉机和农林机械车轮侧向负载疲劳试验方法Wheels side load fatigue test methods for tractors, agricultural and forestry machines53 GB/T 14786-1993 拖拉机和农林机械车轮扭转疲劳试验方法Wheels torsion fatigue test methods for tractors, agricultural and forestry machines54 GB 15369-1994 农林拖拉机和机械安全技术要求第三部分: 拖拉机Tractors and machinery for agriculture and forestry--Technical means for ensuring safety--Part 3: Tractors55 GB/T 15370-1994 农业轮式和履带拖拉机通用技术条件General Specifications for agricultural wheeled and tracking tractors56 GB/T 15832-1995 林业轮式和履带拖拉机通用技术条件General specifications for forestry wheeled and tracklaying tractors57 GB/T 15833-1995 林业轮式和履带拖拉机试验方法Test methods for forestry wheeled and tracklaying tractors58 GB/T 6235-1997 农业拖拉机驾驶座及主要操纵装置位置尺寸Agricultural tractors--Operator's seating accommodation--Dimensions59 GB/T 16877-1997 拖拉机禁用与报废Prohibition and scrapping for tractors60 GB/T 17122-1997 草坪和园艺乘座式拖拉机动力输出套管Lawn and garden ride-on (riding) tractors--Power take-off61 GB/T 17123-1997 草坪和园艺乘座式拖拉机单点套管式悬挂装置Lawn and garden ride-on (riding) tractors--One-point tubular sleeve hitch62 GB/T 17124-1997 草坪和园艺乘座式拖拉机牵引杆Lawn and garden ride-on (riding) tractors--Drawbar63 GB/T 6232-1998 农林拖拉机和机械车轮在轮毂上安装尺寸Tractors and machinery for agriculture and forestry-Wheel-to-hub fixing dimensions挂车1 GB/T 4330-1984 农业挂车Agricultural trailer2 GB/T 4331-1984 农用挂车试验方法Test methods for agricultural trailers3 GB/T 4606-1984 道路车辆半挂车鞍座50号牵引销主要尺寸和安装、互换性尺寸Road vehicles--50 semi-trailer fifth wheel coupling pin--Basic and mounting/interchangeability dimensions4 GB/T 4607-1984 道路车辆半挂车鞍座90号牵引销主要尺寸和安装、互换性尺寸Road vehicles--90 semi-trailer fifth wheel coupling pin--Basic and mounting/interchangeability dimensions5 GB/T 4781-1984 牵引车与全挂车的机械连接装置互换性Mechanical connection between towing vehicle and full trailers for interchangeability6 GB/T 6420-1986 货运挂车系列型谱Freight trailer series pedigree7 GB/T 13872-1992 货运挂车定型试验规程Trailer--Rules for the identification test8 GB/T 13873-1992 货运挂车试验方法Trailer--Test procedure9 GB/T 13874-1992 货运挂车质量定期检查试验规程Trailer--Rules for the periodic quality inspection test10 GB/T 13880-1992 半挂牵引车牵引座的安装Road vehicles--Semi trailer fifth wheel mounting11 GB/T 13881-1992 牵引车与挂车之间气制动管连接器Pneumatic braking connections between motor vehicles and towed vehicles12 GB/T 13202-1997 摩托车轮辋系列Series of motorcycle rims13 GB/T 17275-1998 货运全挂车通用技术条件Technical requirements for freight full trailers摩托车。

OrCAD快捷键及菜单命令中英对照表OrCAD Layout 快捷键及菜单命令中英对照表OrCAD的其它软件模块(tools\....)Library Manager：开启Layout零件编辑视窗Orcad Capture：开启OrCAD原理图Visual CADD：开启Visual CADD机械图编辑视窗SmartRoute：开启Layout的SmartRoute无网格布线器GerbTool：开启Layout的GerbT ool工具编辑视窗ECOS：自动把原理图的更新传递到PCBEdit App Settings：编辑Layout的配置文件Reload App Settings：装载Layout的配置文件设置布线板层 Layers (Tools>Layer>Select From Spreadsheet)双击每一层的Layer TypeRouting Layer：该板层为布线板层Plane Layer：该板层为电源板层Unused Routing：不使用该板层Documentation：该板层为与布线无关的文字绢印层Drill Layer：钻孔层Jumper Layer：跳线层设置网络属性 Nets (Tools>nets>Select From Spreadsheet)Net Attributes：附加的网络属性Min Width：最小的线宽Conn Width：布线的线宽Max Width：最大的线宽Weight：设定布线的优先次序Net Layers…：设置该网络线的布线板层Width By Layer…：设置该网络线在不同板层上的宽度Net Reconn…：设置网络的特殊属性Net Spacing…：该网络在不同板层上的线与线之间的安全间距系统环境Options>System Settings…Display Units：设置系统使用的单位Display Resolution：显示的最小单位Grids：设定系统各种网格格点的间距Detail Grid：设定障碍物或文本等的网格Rotation：设置零件一次旋转的角度和精度Workspace Settings…：设定编辑区的大小用户属性设置Options>User Preferences…Enable Full Screen Cursor：鼠标以大十字架显示Enable AutoPan：自动移动屏幕Use Opaque Graphics：显示时，工作板层是否覆盖所有板层Use Hollow Pads：焊盘是否以空心的形式显示Show 3D Effects：显示3D立体效果Activate Online DRC（按钮）：启动在线DRC检测Instantaneous Reconnection Mode（按钮）：隐藏鼠线Allow Editing of Footprints：允许在PCB板上编辑Footprint Enable Copper Pour：是否显示铺铜Use Fast fill Mode：使用快速显示铺铜Use Pours for Connectivity：以铺铜代替走线Show Tooltips：当鼠标移动到按钮上时，是否显示按钮的提示信息Activate AutoT ool Select Mode：是否开启自动切换工具的功能Minimum Track Width to Display：指定所要显示的最小线宽零件自动布局参数设定→Strategy…→PlacePass Options→Placement Strategy…Enable：指定该零件布置程序的执行状况。

LED照明常用词汇中英文对照3printed circuit 印制电路printed wiring 印制线路printed board 印制板printed circuit board 印制板电路printed wiring board 印制线路板printed component 印制元件printed contact 印制接点printed board assembly 印制板装配board 板rigid printed board 刚性印制板flexible printed circuit 挠性印制电路flexible printed wiring 挠性印制线路flush printed board 齐平印制板metal core printed board 金属芯印制板metal base printed board 金属基印制板mulit-wiring printed board 多重布线印制板molded circuit board 模塑电路板discrete wiring board 散线印制板micro wire board 微线印制板buile-up printed board 积层印制板surface laminar circuit 表面层合电路板B2it printed board 埋入凸块连印制板chip on board 载芯片板buried resistance board 埋电阻板mother board 母板daughter board 子板backplane 背板bare board 裸板copper-invar-copper board 键盘板夹心板dynamic flex board 动态挠性板static flex board 静态挠性板break-away planel 可断拼板cable 电缆flexible flat cable (FFC) 挠性扁平电缆membrane switch 薄膜开关hybrid circuit 混合电路thick film 厚膜thick film circuit 厚膜电路thin film 薄膜thin film hybrid circuit 薄膜混合电路interconnection 互连conductor trace line 导线flush conductor 齐平导线transmission line 传输线crossover 跨交edge-board contact 板边插头stiffener 增强板substrate 基底real estate 基板面conductor side 导线面component side 元件面solder side 焊接面printing 印制grid 网格pattern 图形conductive pattern 导电图形non-conductive pattern 非导电图形legend 字符mark 标志base material 基材laminate 层压板metal-clad bade material 覆金属箔基材copper-clad laminate (CCL) 覆铜箔层压板composite laminate 复合层压板thin laminate 薄层压板basis material 基体材料prepreg 预浸材料bonding sheet 粘结片preimpregnated bonding sheer 预浸粘结片epoxy glass substrate 环氧玻璃基板mass lamination panel 预制内层覆箔板core material 内层芯板bonding layer 粘结层film adhesive 粘结膜unsupported adhesive film 无支撑胶粘剂膜cover layer (cover lay) 覆盖层stiffener material 增强板材copper-clad surface 铜箔面foil removal surface 去铜箔面unclad laminate surface 层压板面base film surface 基膜面adhesive faec 胶粘剂面plate finish 原始光洁面matt finish 粗面length wise direction 纵向cross wise direction 模向cut to size panel 剪切板ultra thin laminate 超薄型层压板A-stage resin A阶树脂B-stage resin B阶树脂C-stage resin C阶树脂epoxy resin 环氧树脂phenolic resin 酚醛树脂polyester resin 聚酯树脂polyimide resin 聚酰亚胺树脂bismaleimide-triazine resin 双马来酰亚胺三嗪树脂acrylic resin 丙烯酸树脂melamine formaldehyde resin 三聚氰胺甲醛树脂polyfunctional epoxy resin 多官能环氧树脂brominated epoxy resin 溴化环氧树脂epoxy novolac 环氧酚醛fluroresin 氟树脂silicone resin 硅树脂silane 硅烷polymer 聚合物amorphous polymer 无定形聚合物crystalline polamer 结晶现象dimorphism 双晶现象copolymer 共聚物synthetic 合成树脂thermosetting resin 热固性树脂thermoplastic resin 热塑性树脂photosensitive resin 感光性树脂epoxy value 环氧值dicyandiamide 双氰胺binder 粘结剂adesive 胶粘剂curing agent 固化剂flame retardant 阻燃剂opaquer 遮光剂plasticizers 增塑剂unsatuiated polyester 不饱和聚酯polyester 聚酯薄膜polyimide film (PI) 聚酰亚胺薄膜polytetrafluoetylene (PTFE) 聚四氟乙烯reinforcing material 增强材料glass fiber 玻璃纤维E-glass fibre E玻璃纤维D-glass fibre D玻璃纤维S-glass fibre S玻璃纤维glass fabric 玻璃布non-woven fabric 非织布glass mats 玻璃纤维垫yarn 纱线filament 单丝strand 绞股weft yarn 纬纱warp yarn 经纱denier 但尼尔warp-wise 经向thread count 织物经纬密度weave structure 织物组织plain structure 平纹组织grey fabric 坏布woven scrim 稀松织物bow of weave 弓纬end missing 断经mis-picks 缺纬bias 纬斜crease 折痕waviness 云织fish eye 鱼眼feather length 毛圈长mark 厚薄段split 裂缝twist of yarn 捻度size content 浸润剂含量size residue 浸润剂残留量finish level 处理剂含量size 浸润剂couplint agent 偶联剂finished fabric 处理织物polyarmide fiber 聚酰胺纤维aromatic polyamide paper 聚芳酰胺纤维纸breaking length 断裂长height of capillary rise 吸水高度wet strength retention 湿强度保留率whitenness 白度ceramics 陶瓷conductive foil 导电箔copper foil 铜箔rolled copper foil 压延铜箔annealed copper foil 退火铜箔thin copper foil 薄铜箔adhesive coated foil 涂胶铜箔resin coated copper foil 涂胶脂铜箔composite metallic material 复合金属箔carrier foil 载体箔invar 殷瓦foil profile 箔（剖面）轮廓shiny side 光面matte side 粗糙面treated side 处理面stain proofing 防锈处理double treated foil 双面处理铜箔shematic diagram 原理图logic diagram 逻辑图printed wire layout 印制线路布设master drawing 布设总图computer aided drawing 计算机辅助制图computer controlled display 计算机控制显示placement 布局routing 布线layout 布图设计rerouting 重布simulation 模拟logic simulation 逻辑模拟circit simulation 电路模拟timing simulation 时序模拟modularization 模块化layout effeciency 布线完成率MDF databse 机器描述格式数据库design database 设计数据库design origin 设计原点optimization (design) 优化（设计）predominant axis 供设计优化坐标轴table origin 表格原点mirroring 镜像drive file 驱动文件intermediate file 中间文件manufacturing documentation 制造文件queue support database 队列支撑数据库component positioning 元件安置graphics dispaly 图形显示scaling factor 比例因子scan filling 扫描填充rectangle filling 矩形填充region filling 填充域physical design 实体设计logic design 逻辑设计logic circuit 逻辑电路hierarchical design 层次设计top-down design 自顶向下设计bottom-up design 自底向上设计net 线网digitzing 数字化design rule checking 设计规则检查router (CAD) 走（布）线器net list 网络表subnet 子线网objective function 目标函数post design processing (PDP) 设计后处理interactive drawing design 交互式制图设计cost metrix 费用矩阵engineering drawing 工程图block diagram 方块框图moze 迷宫component density 元件密度traveling salesman problem 回售货员问题degrees freedom 自由度out going degree 入度incoming degree 出度manhatton distance 曼哈顿距离euclidean distance 欧几里德距离network 网络array 阵列segment 段logic 逻辑logic design automation 逻辑设计自动化separated time 分线separated layer 分层definite sequence 定顺序conduction (track) 导线（通道）conductor width 导线（体）宽度conductor spacing 导线距离conductor layer 导线层conductor line/space 导线宽度/间距conductor layer No.1 第一导线层round pad 圆形盘square pad 方形盘diamond pad 菱形盘oblong pad 长方形焊盘bullet pad 子弹形盘teardrop pad 泪滴盘snowman pad 雪人盘V-shaped pad V形盘annular pad 环形盘non-circular pad 非圆形盘isolation pad 隔离盘monfunctional pad 非功能连接盘offset land 偏置连接盘back-bard land 腹（背）裸盘anchoring spaur 盘址land pattern 连接盘图形land grid array 连接盘网格阵列annular ring 孔环component hole 元件孔mounting hole 安装孔supported hole 支撑孔unsupported hole 非支撑孔via 导通孔plated through hole (PTH) 镀通孔access hole 余隙孔blind via (hole) 盲孔buried via hole 埋孔buried blind via 埋,盲孔any layer inner via hole 任意层内部导通孔all drilled hole 全部钻孔toaling hole 定位孔landless hole 无连接盘孔interstitial hole 中间孔landless via hole 无连接盘导通孔pilot hole 引导孔terminal clearomee hole 端接全隙孔dimensioned hole 准尺寸孔via-in-pad 在连接盘中导通孔hole location 孔位hole density 孔密度hole pattern 孔图drill drawing 钻孔图assembly drawing 装配图datum referan 参考基准。

PCB基材类词汇中英文对照：1、基材：base material2、层压板：laminate3、覆金属箔基材：metal-clad bade material4、覆铜箔层压板：copper-clad laminate (ccl)5、单面覆铜箔层压板：single-sided copper-clad laminate6、双面覆铜箔层压板：double-sided copper-clad laminate7、复合层压板：composite laminate8、薄层压板：thin laminate9、金属芯覆铜箔层压板：metal core copper-clad laminate10、金属基覆铜层压板：metal base copper-clad laminate11、挠性覆铜箔绝缘薄膜：flexible copper-clad dielectric film12、基体材料：basis material13、预浸材料：prepreg14、粘结片：bonding sheet15、预浸粘结片：preimpregnated bonding sheer16、环氧玻璃基板：epoxy glass substrate17、加成法用层压板：laminate for additive process18、预制内层覆箔板：mass lamination panel19、内层芯板：core material20、催化板材：catalyzed board ,coated catalyzed laminate21、涂胶催化层压板：adhesive-coated catalyzed laminate22、涂胶无催层压板：adhesive-coated uncatalyzed laminate23、粘结层：bonding layer24、粘结膜：film adhesive25、涂胶粘剂绝缘薄膜：adhesive coated dielectric film26、无支撑胶粘剂膜：unsupported adhesive film27、覆盖层：cover layer (cover lay)28、增强板材：stiffener material29、铜箔面：copper-clad surface30、去铜箔面：foil removal surface31、层压板面：unclad laminate surface32、基膜面：base film surface33、胶粘剂面：adhesive faec34、原始光洁面：plate finish35、粗面：matt finish36、纵向：length wise direction37、模向：cross wise direction38、剪切板：cut to size panel39、酚醛纸质覆铜箔板：phenolic cellulose paper copper-clad laminates (phenolic/paper ccl)40、环氧纸质覆铜箔板：epoxide cellulose paper copper-clad laminates (epoxy/paper ccl)41、环氧玻璃布基覆铜箔板：epoxide woven glass fabric copper-clad lam inates42、环氧玻璃布纸复合覆铜箔板：epoxide cellulose paper core, glass cloth surfaces copper-clad laminates43、环氧玻璃布玻璃纤维复合覆铜箔板：epoxide non woven/woven glass reinforced copper-clad laminates 44、聚酯玻璃布覆铜箔板：ployester woven glass fabric copper-clad lam inates45、聚酰亚胺玻璃布覆铜箔板：polyimide woven glass fabric copper-clad laminates46、双马来酰亚胺三嗪环氧玻璃布覆铜箔板：bismaleimide/triazine/epoxide woven glass fabric copper-clad la mimates47、环氧合成纤维布覆铜箔板：epoxide synthetic fiber fabric copper-cl ad laminates48、聚四乙烯玻璃纤维覆铜箔板：teflon/fiber glass copper-clad laminat es49、超薄型层压板：ultra thin laminate50、陶瓷基覆铜箔板：ceramics base copper-clad laminates51、紫外线阻挡型覆铜箔板：uv blocking copper-clad laminatesPCB线路电气互连词汇中英文对照：1、表面间连接：interlayer connection2、层间连接：interlayer connection3、内层连接：innerlayer connection4、非功能表面连接：nonfunctional interfacial connection5、跨接线：jumper wire6、节（交）点：node7、附加线：haywire8、端接（点）：terminal9、连接线：terminated line10、端接：termination11、连接端：pad, land12、贯穿连接：through connection13、支线：stub14、印制插头：tab15、键槽：keying slot16、连接器：connector17、板边连接器：edge board connector18、连接器区：connector area19、直角板边连接器：right angle edge connector20、偏槽口：polarizing slot21、偏置端接区：offset terminal area22、接地：ground23、端接隔离（空环）：terminal clearance24、连通性：continuity25、连接器接触：connector contact26、接触面积：contact area27、接触间距：contact spacing28、接触电阻：contact resistance29、接触尺寸：contact size30、元件引腿（脚）：component lead31、元件插针：component pin32、最小电气间距：minimum electrical spacing33、导电性：conductivity34、边卡连接器：card-edge connector35、插卡连接器：card-insertion connector36、载流量：current-carrying capacity37、蹯径：path38、最短路径：shortest path39、关键路径：critical path40、倒角：miter41、串推：daisy chain42、斯坦纳树：steiner tree43、最小生成树：minimum spanning tree (MST)44、瓶颈宽度：necked width45、短叉长度：spur length46、短柱长度：stub length47、曼哈顿路径：manhattan path48、连接度（性）：connectivityPCB线路设计词汇中英文对照：1、原理图：shematic diagram2、逻辑图：logic diagram3、印制线路布设：printed wire layout4、布设总图：master drawing5、可制造性设计：design-for-manufacturability6、计算机辅助设计：computer-aided design.(cad)7、计算机辅助制造：computer-aided manufacturing.(cam)8、计算机集成制造：computer integrat manufacturing.(cim)9、计算机辅助工程：computer-aided engineering.(cae)10、计算机辅助测试：computer-aided test.(cat)11、电子设计自动化：electric design automation .(eda)12、工程设计自动化：engineering design automaton .(eda2)13、组装设计自动化：assembly aided architectural design. (aaad)14、计算机辅助制图：computer aided drawing15、计算机控制显示：computer controlled display .(ccd)16、布局：placement17、布线：routing18、布图设计：layout19、重布：rerouting20、模拟：simulation21、逻辑模拟：logic simulation22、电路模拟：circit simulation23、时序模拟：timing simulation24、模块化：modularization25、布线完成率：layout effeciency26、机器描述格式：machine descriptionm format .(mdf)27、机器描述格式数据库：mdf databse28、设计数据库：design database29、设计原点：design origin30、优化（设计）：optimization (design)31、供设计优化坐标轴：predominant axis32、表格原点：table origin33、镜像：mirroring34、驱动文件：drive file35、中间文件：intermediate file36、制造文件：manufacturing documentation37、队列支撑数据库：queue support database38、元件安置：component positioning39、图形显示：graphics dispaly40、比例因子：scaling factor41、扫描填充：scan filling42、矩形填充：rectangle filling43、填充域：region filling44、实体设计：physical design45、逻辑设计：logic design46、逻辑电路：logic circuit47、层次设计：hierarchical design48、自顶向下设计：top-down design49、自底向上设计：bottom-up design50、线网：net51、数字化：digitzing52、设计规则检查：design rule checking53、走（布）线器：router (cad)54、网络表：net list55、计算机辅助电路分析：computer-aided circuit analysis56、子线网：subnet57、目标函数：objective function58、设计后处理：post design processing (pdp)59、交互式制图设计：interactive drawing design60、费用矩阵：cost metrix61、工程图：engineering drawing62、方块框图：block diagram63、迷宫：moze64、元件密度：component density65、巡回售货员问题：traveling salesman problem66、自由度：degrees freedom67、入度：out going degree68、出度：incoming degree69、曼哈顿距离：manhatton distance70、欧几里德距离：euclidean distance71、网络：network72、阵列：array73、段：segment74、逻辑：logic75、逻辑设计自动化：logic design automation76、分线：separated time77、分层：separated layer78、定顺序：definite sequence。

一、综合词汇1、印制电路：printed circuit2、印制线路：printed wiring3、印制板：printed board4、印制板电路：printed circuit board (pcb)5、印制线路板：printed wiring board(pwb)6、印制元件：printed component7、印制接点：printed contact8、印制板装配：printed board assembly9、板：board10、单面印制板：single-sided printed board(ssb)11、双面印制板：double-sided printed board(dsb)12、多层印制板：mulitlayer printed board(mlb)13、多层印制电路板：mulitlayer printed circuit board14、多层印制线路板：mulitlayer prited wiring board15、刚性印制板：rigid printed board16、刚性单面印制板：rigid single-sided printed borad17、刚性双面印制板：rigid double-sided printed borad18、刚性多层印制板：rigid multilayer printed board19、挠性多层印制板：flexible multilayer printed board20、挠性印制板：flexible printed board21、挠性单面印制板：flexible single-sided printed board22、挠性双面印制板：flexible double-sided printed board23、挠性印制电路：flexible printed circuit (fpc)24、挠性印制线路：flexible printed wiring25、刚性印制板：flex-rigid printed board, rigid-flex printed board26、刚性双面印制板：flex-rigid double-sided printed board, rigid-flex double-sided printed27、刚性多层印制板：flex-rigid multilayer printed board, rigid-flex multilayer printed board28、齐平印制板：flush printed board29、金属芯印制板：metal core printed board30、金属基印制板：metal base printed board31、多重布线印制板：mulit-wiring printed board32、陶瓷印制板：ceramic substrate printed board33、导电胶印制板：electroconductive paste printed board34、模塑电路板：molded circuit board35、模压印制板：stamped printed wiring board36、顺序层压多层印制板：sequentially-laminated mulitlayer37、散线印制板：discrete wiring board38、微线印制板：micro wire board39、积层印制板：buile-up printed board40、积层多层印制板：build-up mulitlayer printed board (bum)41、积层挠印制板：build-up flexible printed board42、表面层合电路板：surface laminar circuit (slc)43、埋入凸块连印制板：b2it printed board44、多层膜基板：multi-layered film substrate(mfs)45、层间全内导通多层印制板：alivh multilayer printed board46、载芯片板：chip on board (cob)47、埋电阻板：buried resistance board48、母板：mother board49、子板：daughter board50、背板：backplane51、裸板：bare board52、键盘板夹心板：copper-invar-copper board53、动态挠性板：dynamic flex board54、静态挠性板：static flex board55、可断拼板：break-away planel56、电缆：cable57、挠性扁平电缆：flexible flat cable (ffc)58、薄膜开关：membrane switch59、混合电路：hybrid circuit60、厚膜：thick film61、厚膜电路：thick film circuit62、薄膜：thin film63、薄膜混合电路：thin film hybrid circuit64、互连：interconnection65、导线：conductor trace line66、齐平导线：flush conductor67、传输线：transmission line68、跨交：crossover69、板边插头：edge-board contact70、增强板：stiffener71、基底：substrate72、基板面：real estate73、导线面：conductor side74、元件面：component side75、焊接面：solder side76、印制：printing77、网格：grid78、图形：pattern79、导电图形：conductive pattern80、非导电图形：non-conductive pattern81、字符：legend82、标志：mark二、基材：1、基材：base material2、层压板：laminate3、覆金属箔基材：metal-clad bade material4、覆铜箔层压板：copper-clad laminate (ccl)5、单面覆铜箔层压板：single-sided copper-clad laminate6、双面覆铜箔层压板：double-sided copper-clad laminate7、复合层压板：composite laminate8、薄层压板：thin laminate9、金属芯覆铜箔层压板：metal core copper-clad laminate10、金属基覆铜层压板：metal base copper-clad laminate11、挠性覆铜箔绝缘薄膜：flexible copper-clad dielectric film12、基体材料：basis material13、预浸材料：prepreg14、粘结片：bonding sheet15、预浸粘结片：preimpregnated bonding sheer16、环氧玻璃基板：epoxy glass substrate17、加成法用层压板：laminate for additive process18、预制内层覆箔板：mass lamination panel19、内层芯板：core material20、催化板材：catalyzed board ,coated catalyzed laminate21、涂胶催化层压板：adhesive-coated catalyzed laminate22、涂胶无催层压板：adhesive-coated uncatalyzed laminate23、粘结层：bonding layer24、粘结膜：film adhesive25、涂胶粘剂绝缘薄膜：adhesive coated dielectric film26、无支撑胶粘剂膜：unsupported adhesive film27、覆盖层：cover layer (cover lay)28、增强板材：stiffener material29、铜箔面：copper-clad surface30、去铜箔面：foil removal surface31、层压板面：unclad laminate surface32、基膜面：base film surface33、胶粘剂面：adhesive faec34、原始光洁面：plate finish35、粗面：matt finish36、纵向：length wise direction37、模向：cross wise direction38、剪切板：cut to size panel39、酚醛纸质覆铜箔板：phenolic cellulose paper copper-clad laminates(phenolic/paper ccl)40、环氧纸质覆铜箔板：epoxide cellulose paper copper-clad laminates (epoxy/paper ccl)41、环氧玻璃布基覆铜箔板：epoxide woven glass fabric copper-clad laminates42、环氧玻璃布纸复合覆铜箔板：epoxide cellulose paper core, glass cloth surfaces copper-clad laminates43、环氧玻璃布玻璃纤维复合覆铜箔板：epoxide non woven/woven glass reinforced copper-clad laminates44、聚酯玻璃布覆铜箔板：ployester woven glass fabric copper-clad laminates45、聚酰亚胺玻璃布覆铜箔板：polyimide woven glass fabric copper-clad laminates46、双马来酰亚胺三嗪环氧玻璃布覆铜箔板：bismaleimide/triazine/epoxide woven glass fabric copper-clad lamim ates47、环氧合成纤维布覆铜箔板：epoxide synthetic fiber fabric copper-clad laminates48、聚四乙烯玻璃纤维覆铜箔板：teflon/fiber glass copper-clad laminates49、超薄型层压板：ultra thin laminate50、陶瓷基覆铜箔板：ceramics base copper-clad laminates51、紫外线阻挡型覆铜箔板：uv blocking copper-clad laminates三、基材的材料1、 a阶树脂：a-stage resin2、 b阶树脂：b-stage resin3、 c阶树脂：c-stage resin4、环氧树脂：epoxy resin5、酚醛树脂：phenolic resin6、聚酯树脂：polyester resin7、聚酰亚胺树脂：polyimide resin8、双马来酰亚胺三嗪树脂：bismaleimide-triazine resin9、丙烯酸树脂：acrylic resin10、三聚氰胺甲醛树脂：melamine formaldehyde resin11、多官能环氧树脂：polyfunctional epoxy resin12、溴化环氧树脂：brominated epoxy resin13、环氧酚醛：epoxy novolac14、氟树脂：fluroresin15、硅树脂：silicone resin16、硅烷：silane17、聚合物：polymer18、无定形聚合物：amorphous polymer19、结晶现象：crystalline polamer20、双晶现象：dimorphism21、共聚物：copolymer22、合成树脂：synthetic23、热固性树脂：thermosetting resin24、热塑性树脂：thermoplastic resin25、感光性树脂：photosensitive resin26、环氧当量：weight per epoxy equivalent (wpe)27、环氧值：epoxy value28、双氰胺：dicyandiamide29、粘结剂：binder30、胶粘剂：adesive31、固化剂：curing agent32、阻燃剂：flame retardant33、遮光剂：opaquer34、增塑剂：plasticizers35、不饱和聚酯：unsatuiated polyester36、聚酯薄膜：polyester37、聚酰亚胺薄膜：polyimide film (pi)38、聚四氟乙烯：polytetrafluoetylene (ptfe)39、聚全氟乙烯丙烯薄膜：perfluorinated ethylene-propylene copolymer film (fep)40、增强材料：reinforcing material41、玻璃纤维：glass fiber42、 e玻璃纤维：e-glass fibre43、 d玻璃纤维：d-glass fibre44、 s玻璃纤维：s-glass fibre45、玻璃布：glass fabric46、非织布：non-woven fabric47、玻璃纤维垫：glass mats48、纱线：yarn49、单丝：filament50、绞股：strand51、纬纱：weft yarn52、经纱：warp yarn53、但尼尔：denier54、经向：warp-wise55、纬向：weft-wise, filling-wise56、织物经纬密度：thread count57、织物组织：weave structure58、平纹组织：plain structure59、坏布：grey fabric60、稀松织物：woven scrim61、弓纬：bow of weave62、断经：end missing63、缺纬：mis-picks64、纬斜：bias65、折痕：crease66、云织：waviness67、鱼眼：fish eye68、毛圈长：feather length69、厚薄段：mark70、裂缝：split71、捻度：twist of yarn72、浸润剂含量：size content73、浸润剂残留量：size residue74、处理剂含量：finish level75、浸润剂：size76、偶联剂：couplint agent77、处理织物：finished fabric78、聚酰胺纤维：polyarmide fiber79、聚酯纤维非织布：non-woven polyester fabric80、浸渍绝缘纵纸：impregnating insulation paper81、聚芳酰胺纤维纸：aromatic polyamide paper82、断裂长：breaking length83、吸水高度：height of capillary rise84、湿强度保留率：wet strength retention85、白度：whitenness86、陶瓷：ceramics87、导电箔：conductive foil88、铜箔：copper foil89、电解铜箔：electrodeposited copper foil (ed copper foil)90、压延铜箔：rolled copper foil91、退火铜箔：annealed copper foil92、压延退火铜箔：rolled annealed copper foil (ra copper foil)93、薄铜箔：thin copper foil94、涂胶铜箔：adhesive coated foil95、涂胶脂铜箔：resin coated copper foil (rcc)96、复合金属箔：composite metallic material97、载体箔：carrier foil98、殷瓦：invar99、箔（剖面）轮廓：foil profile100、光面：shiny side101、粗糙面：matte side102、处理面：treated side103、防锈处理：stain proofing104、双面处理铜箔：double treated foil四、设计1、原理图：shematic diagram2、逻辑图：logic diagram3、印制线路布设：printed wire layout4、布设总图：master drawing5、可制造性设计：design-for-manufacturability6、计算机辅助设计：computer-aided design.(cad)7、计算机辅助制造：computer-aided manufacturing.(cam)8、计算机集成制造：computer integrat manufacturing.(cim)9、计算机辅助工程：computer-aided engineering.(cae)10、计算机辅助测试：computer-aided test.(cat)11、电子设计自动化：electric design automation .(eda)12、工程设计自动化：engineering design automaton .(eda2)13、组装设计自动化：assembly aided architectural design. (aaad)14、计算机辅助制图：computer aided drawing15、计算机控制显示：computer controlled display .(ccd)16、布局：placement17、布线：routing18、布图设计：layout19、重布：rerouting20、模拟：simulation21、逻辑模拟：logic simulation22、电路模拟：circit simulation23、时序模拟：timing simulation24、模块化：modularization25、布线完成率：layout effeciency26、机器描述格式：machine descriptionm format .(mdf)27、机器描述格式数据库：mdf databse28、设计数据库：design database29、设计原点：design origin30、优化（设计）：optimization (design)31、供设计优化坐标轴：predominant axis32、表格原点：table origin33、镜像：mirroring34、驱动文件：drive file35、中间文件：intermediate file36、制造文件：manufacturing documentation37、队列支撑数据库：queue support database38、元件安置：component positioning39、图形显示：graphics dispaly40、比例因子：scaling factor41、扫描填充：scan filling42、矩形填充：rectangle filling43、填充域：region filling44、实体设计：physical design45、逻辑设计：logic design46、逻辑电路：logic circuit47、层次设计：hierarchical design48、自顶向下设计：top-down design49、自底向上设计：bottom-up design50、线网：net51、数字化：digitzing52、设计规则检查：design rule checking53、走（布）线器：router (cad)54、网络表：net list55、计算机辅助电路分析：computer-aided circuit analysis56、子线网：subnet57、目标函数：objective function58、设计后处理：post design processing (pdp)59、交互式制图设计：interactive drawing design60、费用矩阵：cost metrix61、工程图：engineering drawing62、方块框图：block diagram63、迷宫：moze64、元件密度：component density65、巡回售货员问题：traveling salesman problem66、自由度：degrees freedom67、入度：out going degree68、出度：incoming degree69、曼哈顿距离：manhatton distance70、欧几里德距离：euclidean distance71、网络：network72、阵列：array73、段：segment74、逻辑：logic75、逻辑设计自动化：logic design automation76、分线：separated time77、分层：separated layer78、定顺序：definite sequence五、形状与尺寸：1、导线（通道）：conduction (track)2、导线（体）宽度：conductor width3、导线距离：conductor spacing4、导线层：conductor layer5、导线宽度/间距：conductor line/space6、第一导线层：conductor layer no.17、圆形盘：round pad8、方形盘：square pad9、菱形盘：diamond pad10、长方形焊盘：oblong pad11、子弹形盘：bullet pad12、泪滴盘：teardrop pad13、雪人盘：snowman pad14、 v形盘：v-shaped pad15、环形盘：annular pad16、非圆形盘：non-circular pad17、隔离盘：isolation pad18、非功能连接盘：monfunctional pad19、偏置连接盘：offset land20、腹（背）裸盘：back-bard land21、盘址：anchoring spaur22、连接盘图形：land pattern23、连接盘网格阵列：land grid array24、孔环：annular ring25、元件孔：component hole26、安装孔：mounting hole27、支撑孔：supported hole28、非支撑孔：unsupported hole29、导通孔：via30、镀通孔：plated through hole (pth)31、余隙孔：access hole32、盲孔：blind via (hole)33、埋孔：buried via hole34、埋/盲孔：buried /blind via35、任意层内部导通孔：any layer inner via hole (alivh)36、全部钻孔：all drilled hole37、定位孔：toaling hole38、无连接盘孔：landless hole39、中间孔：interstitial hole40、无连接盘导通孔：landless via hole41、引导孔：pilot hole42、端接全隙孔：terminal clearomee hole43、准表面间镀覆孔：quasi-interfacing plated-through hole44、准尺寸孔：dimensioned hole45、在连接盘中导通孔：via-in-pad46、孔位：hole location47、孔密度：hole density48、孔图：hole pattern49、钻孔图：drill drawing50、装配图：assembly drawing51、印制板组装图：printed board assembly drawing52、参考基准：datum referance。

Violations associated with buses 与总线有关的错误Bus indices out of range 总线指数超出范围Bus range syntax errors 总线语法错误Illegal bus definitions 非法总线定义Illegal bus range values 非法总线范围值Mismatched bus label ordering 总线标签不匹配Mismatched bus widths 总线宽度不匹配Mismatched bus-section index ordering 设定的总线Mismatched bus/wire object on wire/bus 不匹配的总线Mismatched electrical types on bus 总线电气类型不匹配Mismatched generics on bus (first index)Mismatched generics on bus (second index)Mixed generic and numeric bus labeling 一般数字与总线标签混合Violations associated with components 违反元件用法Component implementations with duplicate pins usage 元件重复使用引脚Component implementations with invalid pin mappings 元件引脚无效Component implementations with missing pins in sequence 元件缺失引脚Component containg duplicate sub-parts 部分子元件重复Component with duplicate implementations 有元件重复Component with duplicate pins 元件引脚重复Duplicate component models 重复元件模型Duplicate part designators 零件标号重复Errors in component model parameters 元件模型参数错误Extra pin found in component display mode 在元件显示模型上发现额外的引脚Mismatched hidden pin connections 隐藏的元件引脚连接Mismatched pin visibility 可见的引脚不匹配Missing component model parameters 元件模型参数丢失Missing component models 元件模型丢失Missing component models in model files 在模型文档中丢失元件模型Missing pin found in component display mode 在元件显示方式中发现引脚缺失Models found in different model locations 在不同的模型地点发现模型Sheet symbol with duplicate entries 原理图符号重复Un-designatde parts requiring annotation 未标识部分需要注解Un sub-part in componentViolations associated with documents 与文件相关的错误Conflicting constraints 冲突的约束Duplicate sheet numbers 数字部分重复Duplicate sheet symbol names 原理图名称重复Missing child sheet for sheet symbol 缺少图纸符号表Missing configuration target 缺少配置目标Missing sub-project sheet for component 缺少分项目元件表Multiple configuration targets 多配置目标Multiple top-level documents 多个顶层文件Port not linked to parent sheet symbol 子图表没有连接到总原理图Sheet entry not linked to child sheet 条目表没有连接到子表Unique identifiers errors 唯一标识符错误Violations associated with nets 网络相关错误Adding hidden net to sheet 给图表添加隐藏的网络Adding items from hidden net to net 从隐藏的网络添加项目Auto-assigned ports to device pins 自动分配元件引脚Duplicate nets 重复网络Floating net labels 网络标签没连接Floating power objects 电源未连接Global power-object scope changesNet parameters with no name 网络参数没有名称Net parameters with no value 网络参数没有值Nets containing floating input pins 网络引脚未连接Nets containing multiple similar objects 网络包含多个类似项目Net with multiple names 网络中使用多个名称Net with no driving source 没有驱动源Nets with only one pin 只有一个引脚Net with possible connection problems 可能出现的连接问题Sheets containing duplicate ports 表中有重复的端口Signals with multiple drivers 多个驱动信号Signals with no driver 信号源无驱动Signals with no load 信号源无负载Unconnected objects in net 有项目未连接进网络Unconnected wires 有未连接的导线Violations associated with others 其他的相关错误No error 无错误Object not completely within sheet boundaries 项目超出图表范围Off-grid object 项目偏离网络Violations associated with parameters 与参数相关的错误Same parameter containing different types 不同的类型相同的参数Same parameter containing different values 相同的参数不同的值。

电子类常用缩写中英文对照表AC(alternating current) 交流(电)A／D(analog to digital) 模拟／数字转换ADC(analog to digital convertor) 模拟／数字转换器ADM(adaptive delta modulation) 自习惯增量调制ADPCM(adaptive differential pulse code modulation) 自习惯差分脉冲编码调制ALU(arithmetic logic unit) 算术逻辑单元ASCII(American standard code for information interchange) 美国信息交换标准码A V(audio visual) 声视，视听BCD(binary coded decimal) 二进制编码的十进制数BCR(bi-directional controlled rectifier)双向晶闸管BCR(buffer courtier reset) 缓冲计数器BZ(buzzer) 蜂鸣器，蜂音器C(capacitance，capacitor) 电容量，电容器CATV(cable television) 电缆电视CCD(charge-coupled device) 电荷耦合器件CCTV(closed-circuit television) 闭路电视CMOS(complementary) 互补MOSCPU(central processing unit)中央处理单元CS(control signal) 操纵信号D(diode) 二极管DAST(direct analog store technology) 直接模拟存储技术DC(direct current) 直流DIP(dual in-line package) 双列直插封装DP(dial pulse) 拨号脉冲DRAM(dynamic random access memory) 动态随机存储器DTL(diode-transistor logic) 二极管晶体管逻辑DUT(device under test) 被测器件DVM(digital voltmeter) 数字电压表ECG(electrocardiograph) 心电图ECL(emitter coupled logic) 射极耦合逻辑EDI(electronic data interchange) 电子数据交换EIA(Electronic Industries Association) 电子工业联合会EOC(end of conversion) 转换结束EPROM(erasable programmable read only memory) 可擦可编程只读存储器EEPROM(electrically EPROM) 电可擦可编程只读存储器ESD(electro-static discharge) 静电放电FET(field-effect transistor) 场效应晶体管FS(full scale) 满量程F／V(frequency to voltage convertor) 频率／电压转换FM(frequency modulation) 调频FSK(frequency shift keying) 频移键控FSM(field strength meter) 场强计FST(fast switching shyster) 快速晶闸管FT(fixed time) 固定时间FU(fuse unit) 保险丝装置FWD(forward) 正向的GAL(generic array logic) 通用阵列逻辑GND(ground) 接地，地线GTO(Sate turn off thruster) 门极可关断晶体管HART(highway addressable remote transducer) 可寻址远程传感器数据公路HCMOS(high density COMS) 高密度互补金属氧化物半导体(器件)HF(high frequency) 高频HTL(high threshold logic) 高阈值逻辑电路HTS(heat temperature sensor) 热温度传感器IC(integrated circuit) 集成电路ID(international data) 国际数据IGBT(insulated gate bipolar transistor) 绝缘栅双极型晶体管IGFET(insulated gate field effect transistor) 绝缘栅场效应晶体管I／O(input／output) 输入／输出I／V(current to voltage convertor) 电流-电压变换器IPM(incidental phase modulation) 附带的相位调制IPM(intelligent power module) 智能功率模块IR(infrared radiation) 红外辐射IRQ(interrupt request) 中断请求JFET(junction field effect transistor) 结型场效应晶体管LAS(light activated switch)光敏开关LASCS(light activated silicon controlled switch) 光控可控硅开关LCD(liquid crystal display) 液晶显示器LDR(light dependent resistor) 光敏电阻LED(light emitting diode) 发光二极管LRC(longitudinal redundancy check) 纵向冗余(码)校验LSB(least significant bit) 最低有效位LSI(1arge scale integration) 大规模集成电路M(motor) 电动机MCT(MOS controlled gyrator) 场控晶闸管MIC(microphone) 话筒，微音器，麦克风min(minute) 分MOS(metal oxide semiconductor)金属氧化物半导体MOSFET(metal oxide semiconductor FET) 金属氧化物半导体场效应晶体管N(negative) 负NMOS(N-channel metal oxide semiconductor FET) N沟道MOSFETNTC(negative temperature coefficient) 负温度系数OC(over current) 过电流OCB(overload circuit breaker) 过载断路器OCS(optical communication system) 光通讯系统OR(type of logic circuit) 或者逻辑电路OV(over voltage) 过电压P(pressure) 压力FAM(pulse amplitude modulation) 脉冲幅度调制PC(pulse code) 脉冲码PCM(pulse code modulation) 脉冲编码调制PDM(pulse duration modulation) 脉冲宽度调制PF(power factor) 功率因数PFM(pulse frequency modulation) 脉冲频率调制PG(pulse generator) 脉冲发生器PGM(programmable) 编程信号PI(proportional-integral(controller)) 比例积分(操纵器)PID(proportional-integral-differential(controller))比例积分微分(操纵器)PIN(positive intrinsic-negative) 光电二极管PIO(parallel input output) 并行输入输出PLD(phase-locked detector) 同相检波PLD(phase-locked discriminator) 锁相解调器PLL(phase-locked loop) 锁相环路PMOS(P-channel metal oxide semiconductor FET) P沟道MOSFET P-P(peak-to-peak) 峰--峰PPM(pulse phase modulation) 脉冲相位洲制PRD(piezoelectric radiation detector) 热电辐射控测器PROM(programmable read only memory) 可编只读程存储器PRT(platinum resistance thermometer) 铂电阻温度计PRT(pulse recurrent time) 脉冲周期时间PUT(programmable unijunction transistor) 可编程单结晶体管PWM(pulse width modulation) 脉宽调制R(resistance，resistor) 电阻，电阻器RAM(random access memory) 随机存储器RCT(reverse conducting thyristor) 逆导晶闸管REF(reference) 参考，基准REV(reverse) 反转R/F(radio frequency) 射频RGB(red／green／blue) 红绿蓝ROM(read only memory) 只读存储器RP(resistance potentiometer) 电位器RST(reset) 复位信号RT(resistor with inherent variability dependent) 热敏电阻RTD(resistance temperature detector) 电阻温度传感器RTL(resistor transistor logic) 电阻晶体管逻辑(电路)RV(resistor with inherent variability dependent on the voltage) 压敏电阻器SA(switching assembly) 开关组件SBS(silicon bi-directional switch) 硅双向开关，双向硅开关SCR(silicon controlled rectifier) 可控硅整流器SCS(safety control switch) 安全操纵开关SCS(silicon controlled switch) 可控硅开关SCS(speed control system) 速度操纵系统SCS(supply control system) 电源操纵系统SG(spark gap) 放电器SIT(static induction transformer) 静电感应晶体管SITH(static induction thyristor) 静电感应晶闸管SP(shift pulse) 移位脉冲SPI(serial peripheral interface) 串行外围接口SR(sample realy，saturable reactor) 取样继电器，饱与电抗器SR(silicon rectifier) 硅整流器SRAM(static random access memory) 静态随机存储器SSR(solid-state relay) 固体继电器SSR(switching select repeater) 中断器开关选择器SSS(silicon symmetrical switch) 硅对称开关，双向可控硅SSW(synchro-switch) 同步开关ST(start) 启动ST(starter) 启动器STB(strobe) 闸门，选通脉冲T(transistor) 晶体管，晶闸管TACH(tachometer) 转速计，转速表TP(temperature probe) 温度传感器TRIAC(triodes AC switch) 三极管交流开关TTL(transistor-transistor logic) 晶体管一晶体管逻辑TV(television) 电视UART(universal asynchronous receiver transmitter) 通用异步收发器VCO(voltage controlled oscillator) 压控振荡器VD(video decoders) 视频译码器VDR(voltage dependent resistor) 压敏电阻VF(video frequency) 视频V／F(voltage-to-frequency) 电压／频率转换V／I(voltage to current convertor) 电压-电流变换器VM(voltmeter) 电压表VS(vacuum switch) 电子开关VT(visual telephone) 电视电话VT(video terminal) 视频终端电子工程中常见的英文缩写--中英文参照表ADC: Analog-Digital Converter 模-数转换器;A/D转换器AGP: Accelerated Graphics Port 高速图形端口AI: Artificial Intelligence 人工智能AM: Application Module 应用模件APM: Advanced Process Manager 增强型过程管理器ARM: Advanced RISC Machines 既能够认为是一个公司的名字，也能够认为是对一类微处理器的通称，还能够认为是一种技术的名字BCD: Binary-Coded-Decimal 二-十进制代码；8421码CAD: Computer Aided Desgin 计算机辅助设计CAM: Computer Aided Manufacturing 计算机辅助制造CAN: Control Area Network 操纵局域网络;LCNCAN: Controller Area Network Bus 设备间网络系统总线CAT: Coputer Aided Test 计算机辅助测试CD: Compel Data 强制数据CDN: Clock Distribution Network 时钟脉冲分配网络CISC: Complex Instruction Set Computer复杂指令系统计算机CM: Caculate Module 计算模件CMMR: Common-Mode Rejection Ratio共模抑制比COB: Chip On Board 内插器CPLD: Complex Programmable Logic Divice复杂可编程逻辑装置CRC: Cyclic Redundancy Check 循环冗余校验CSIC: Customers Specified Integrated CircuitsDCS: Distributed Control System 分布式操纵；集散操纵/TDC；分布式操纵（系统）DDC: Direcr Digital Control 直接数字操纵（系统）DDL: Device Description Language 设备描述语言DHW: Data High Way 高速数据通道；数据高速公路；总线DLSAP: Data Link Service Access Point 数据链路服务访问点DAC: Digital-Analog Converter 数-模转换器;D/A转换器DD：Device Description 设备描述DDL: Device Description Language 设备描述语言DRC: Desgin Rule Check 设计规则检查DSP: Digital Signal Processor 数字信号处理EDA: Electronic Desgin Automation 电子设计自动化EDSP: Embedded Digital Signal Processor嵌入式数字信号处理器EM: Embedded Mirocontroller 嵌入式微操纵器EMPU: Embedded Micro Processor Unit 嵌入式微处理器EMU: Embedded Microcontroller Unit 嵌入式微操纵器EOC: End Of Convert 转换结束EOS: Enhanced Operator Station 增强型操作站ES: Expert System 专家系统EWB: Electronic WorkBench 电子工作平台EWB: Engineer Wok Station 工程师工作站FAS: Field Access Sublayer 现场总线访问子层FB: FieldBus 现场总线FBAP：Function Block Application Process功能块应用进程FCS: Fieldbus Control System 现场总线操纵（系统）FMS: Fieldbus Message Specifiction 现场总线报文规范FIFO: First In First Out 先进先出FET: Field-Efect Tansistor 场効晶体管FF: Fieldbus Foundation 现场总线基金会FPGA: Field Programmable Gate Array现场可编程门阵列FSC: Fail Safe Control safety manager故障安全操纵管理器FSK: Frequency Shift Keying 频移键控（通信技术）GAL: Generic Array Logic 通用阵列逻辑(可重复编程) GLB: Generic Logic Block 通用逻辑块GRP: Global Routing Pool 全局布线区GTO: Gate Turn-off thyristor 可关断晶闸管GTR: Giant Transistor 功率晶体管GUI: Graphical User Interface图形化用户界面GUS: Global User Station 全局用户操作站GW: Gateway 网关HART: Highway Addressable Remote Transducer可寻址远程传感器数据通路通信协议HC: Host Computer 主计算机HDL: Hardware Description Language硬件描述语言HM: History Module 历史模件HP: 惠普HPM: High-performace Process Manager高性能过程管理器HTD: High Way Traffic Director 高速通道操纵器IC: integrated circuit 集成电路IDE: Intigrated Development Environment集成开发环境IDS: Integrated Distributed System 集成式分散系统IEC: International Electrotechnical Commission国际电工委员会IEEE: The Institute of Electrical and Electronics Engineers电工与电子工程研究所(美国)IGBT: Insulated Gate Bipolar Tansistor绝缘栅双极型晶体管IGFET: Isolated-Gate Field-Efect Transistor绝缘栅场効晶体管IOC: I/O Cell 输入/输出单元IP: Internet Protocol 互联网协议IPC: Industrial Control Computer 工控机ISA: Industrial Standard Architecture（总线）ISP: In-System Programmable 在系统可编程LAS: Link Active Scheduler 链路活动调度器LCN: Local Control Network 局部操纵网络；CANMAP: Manufactuin Automation Protocol制造自动化协议MFP: Mlti-Function Processor 多功能处理器MIPS: Microprocessor without Interlocked Pipeline Stages内部无互锁流水线微处理器MIS: Managerment Information System管理信息系统MOS: Matel Oxide Semiconductor 金属氧化物半导体LCD: Liquid Crystal Display 液晶显示器LED: Light Emitting Diode 发光二极管LLI: Lower Layer Interface 低层接口LM: Logic Manager 逻辑管理器MAC: Media Access Control 介质访问操纵MCU: MicroController Unit 微操纵器；单片机；SOC；SCMMDI: Medium Dependent Interface 媒体接口MFCS: Multifunction Field Control Station多功能现场操纵站MPU: MiroProcessor Unit 微处理器NM: Network Management 网络管理ORP: Output Routing Pool 输出布线区OCL：Output CapacitorLess 无输出电容OD: Object Dictionary 对象字典OIS: Operater Interface Station 操作员接口站PAL: Programmable Array Logic 可编程阵列逻辑PCI: Peripheral Component Interconnect外围部件互连(总线)PIN: Plant Infermation Network 工厂信息网络PIU: Process Interface Unit 过程接口单元PLA: Progammable Logic Array 可编程逻辑阵列PLD: Programmable Logic Device 可编程逻辑器件PLS: Physical Si GnallinG 物理信令PMA: Physical Medium Attachment 物理媒体附件PROM: Progammable ROM 可编程只读存储器PT: Pass Token 传递令牌OE: Output Enable 输出同意OLMC: Output Logic Macro Cell 输出逻辑宏单元OTL: Output TransformerLess 无输出变压器PDA: Personal Digital Assistant 个人数字助理PLC: programmable Logic contraller 可编程逻辑操纵器RAM: Random Access Memory 随机存取存储器;读/写存储器RISC: Reduced Instruction Set Computer精简指令系统计算机ROM: Read Only Memory 只读存储器SCC: Supervisory Computer Contol 计算机监督操纵（系统）SCM: Single Chip Mirocomputer 单片微机（国外）；单片机（国内）；MCU；SOC SM: System Mana Gement 系统管理SMM: System Management Module 系统管理站；系统管理模件SOC: System On a Chip 单片机;MCU；（单片机地进展经历了SCM、MCU与SOC 三个阶段）SOPC: System On a Programmable Chip可编程单片机;MCUSPC: Set Point Computer Control 给定值操纵；SCCTD: Time Distribution 时间公布信息TDC: Total Distributed Control 集散操纵；分布式操纵；分散式操纵/DCS(系统) TG: Tansmission Gate 传输门TTL: Transistor-Transistor Logic 晶体管-晶体管逻辑VCR: Virual Communication Relationships 虚拟通信关系VHDL: VHSIC(Very High Speed Integrated Circuit) HDL UCN: Universal Control Network 通用操纵网络US: Universal Station 通用操作站USB: Universal Serial Bus 通用串行总线VGA: Video Graphics Array。

PROTEL DXP2004 DRC 规则英文对照在PROTEL DXP2004中的DRC规则检查项目,对于一些英文水平较薄弱的朋友是一个大难题,特和同事对其进行整理一下,英文水平有限,仅供参考:PROTEL DXP2004 DRC 规则英文对照一、Error Reporting 错误报告A：Violations Associated with Buses 有关总线电气错误的各类型（共12项）1bus indices out of range 总线分支索引超出范围2Bus range syntax errors 总线范围的语法错误3Illegal bus range values 非法的总线范围值4Illegal bus definitions 定义的总线非法5Mismatched bus label ordering 总线分支网络标号错误排序6Mismatched bus/wire object on wire/bus 总线/导线错误的连接导线/总线7Mismatched bus widths 总线宽度错误8Mismatched bus section index ordering 总线范围值表达错误9Mismatched electrical types on bus 总线上错误的电气类型10Mismatched generics on bus (first index) 总线范围值的首位错误11Mismatched generics on bus (second index) 总线范围值末位错误12Mixed generics and numeric bus labeling 总线命名规则错误B：Violations Associated Components 有关元件符号电气错误（共20项）13Component Implementations with duplicate pins usage 元件管脚在原理图中重复被使用14Component Implementations with invalid pin mappings 元件管脚在应用中和PCB封装中的焊盘不符15Component Implementations with missing pins in sequence 元件管脚的序号出现序号丢失16Component contaning duplicate sub-parts 元件中出现了重复的子部分17Component with duplicate Implementations 元件被重复使用18Component with duplicate pins 元件中有重复的管脚19Duplicate component models 一个元件被定义多种重复模型20Duplicate part designators 元件中出现标示号重复的部分21Errors in component model parameters 元件模型中出现错误的的参数22Extra pin found in component display mode 多余的管脚在元件上显示23Mismatched hidden pin component 元件隐藏管脚的连接不匹配24Mismatched pin visibility 管脚的可视性不匹配25Missing component model parameters 元件模型参数丢失26Missing component models 元件模型丢失27Missing component models in model files 元件模型不能在模型文件中找到28Missing pin found in component display mode 不见的管脚在元件上显示29Models found in different model locations 元件模型在未知的路径中找到30Sheet symbol with duplicate entries 方框电路图中出现重复的端口31Un-designated parts requiring annotation 未标记的部分需要自动标号32Unused sub-part in component 元件中某个部分未使用C：violations associated with document 相关的文档电气错误（共10项）33conflicting constraints 约束不一致的34duplicate sheet symbol name 层次原理图中使用了重复的方框电路图35duplicate sheet numbers 重复的原理图图纸序号36missing child sheet for sheet symbol 方框图没有对应的子电路图37missing configuration target 缺少配置对象38missing sub-project sheet for component 元件丢失子项目39multiple configuration targets 无效的配置对象40multiple top-level document 无效的顶层文件41port not linked to parent sheet symbol 子原理图中的端口没有对应到总原理图上的端口42sheet enter not linked to child sheet 方框电路图上的端口在对应子原理图中没有对应端口D：violations associated with nets 有关网络电气错误（共19项）43adding hidden net to sheet 原理图中出现隐藏网络44adding items from hidden net to net 在隐藏网络中添加对象到已有网络中45auto-assigned ports to device pins 自动分配端口到设备引脚46duplicate nets 原理图中出现重名的网络47floating net labels 原理图中有悬空的网络标签48global power-objects scope changes 全局的电源符号错误49net parameters with no name 网络属性中缺少名称50net parameters with no value 网络属性中缺少赋值51nets containing floating input pins 网络包括悬空的输入引脚52nets with multiple names 同一个网络被附加多个网络名53nets with no driving source 网络中没有驱动54nets with only one pin 网络只连接一个引脚55nets with possible connection problems 网络可能有连接上的错误56signals with multiple drivers 重复的驱动信号57sheets containing duplicate ports 原理图中包含重复的端口58signals with load 信号无负载59signals with drivers 信号无驱动60unconnected objects in net 网络中的元件出现未连接对象61unconnected wires 原理图中有没连接的导线E：Violations associated with others有关原理图的各种类型的错误(3项) 62No Error 无错误63Object not completely within sheet boundaries 原理图中的对象超出了图纸边框64Off-grid object原理图中的对象不在格点位置F：Violations associated with parameters 有关参数错误的各种类型65same parameter containing different types 相同的参数出现在不同的模型中66same parameter containing different values 相同的参数出现了不同的取值二、Comparator 规则比较A：Differences associated with components 原理图和PCB上有关的不同(共16项) 67Changed channel class name 通道类名称变化68Changed component class name 元件类名称变化69Changed net class name 网络类名称变化70Changed room definitions 区域定义的变化71Changed Rule 设计规则的变化72Channel classes with extra members 通道类出现了多余的成员73Component classes with extra members 元件类出现了多余的成员74Difference component 元件出现不同的描述75Different designators 元件标示的改变76Different library references 出现不同的元件参考库77Different types 出现不同的标准78Different footprints 元件封装的改变79Extra channel classes 多余的通道类80Extra component classes 多余的元件类81Extra component 多余的元件82Extra room definitions 多余的区域定义B：Differences associated with nets 原理图和PCB上有关网络不同（共6项）83Changed net name 网络名称出现改变84Extra net classes 出现多余的网络类85Extra nets 出现多余的网络86Extra pins in nets 网络中出现多余的管脚87Extra rules 网络中出现多余的设计规则88Net class with Extra members 网络中出现多余的成员C：Differences associated with parameters 原理图和PCB上有关的参数不同（共3项）89Changed parameter types 改变参数类型90Changed parameter value 改变参数的取值91Object with extra parameter 对象出现多余的参数【Violations Associated with Buses】栏——总线电气错误类型（1）【Bus indices out of range】：总线分支索引超出范围。