下载文档原格式
1.54inch e-Paper Module用户手册版本日期内容V1.0 2017.05.17 初版V2.0 2018.12.05 增加注意事项，程序更新【说明】⚫使用产品之前，请阅读本册，非正常使用造成的产品损坏，不在保修范围内⚫本手册是基于提供的示例程序，进行介绍说明⚫本手册默认用户使用的是带驱动板的屏幕（无论是购买驱动板或者自己设计驱动板）⚫用户手册以及程序可能会不定期更新，恕不另外通知，尽请谅解目录版本说明 (4)注意事项 (5)产品简介 (7)产品参数 (7)接口说明（驱动板） (8)工作原理 (9)器件介绍 (9)通信协议（4-wire SPI） (9)示例程序 (11)下载例程 (11)树莓派 (12)硬件连接 (12)复制程序到树莓派 (12)安装函数库（需要联网操作） (13)运行程序 (15)预期结果 (16)Arduino (17)硬件连接 (17)运行程序 (17)预期结果. (18)STM32 (19)硬件连接 (19)运行程序 (19)预期结果 (19)程序说明 (21)版本说明 (21)C代码分析 (21)Python 分析 (25)图片数组制作 (28)本墨水屏有裸屏版本和带驱动板版本。
裸屏版本只有屏幕，使用的时候需要配合驱动板使用，如果您是第一次购买使用微雪墨水屏，建议您购买带驱动板版本，或者再另外购买一款驱动板做测试。
带驱动板的版本，已经将驱动电路集成在背面的PCB 上面，使用的时候可以使用随屏配送的8PIN排线接到单片机控制使用。
裸屏（1.54inch e-Paper）：带驱动板（1.54inch e-Paper Module）:1.支持局刷的屏幕，注意使用的时候不能一直用局刷对屏幕进行刷新，需要在做几次局刷之后，对屏幕进行一次全刷清屏。
否则会造成屏幕显示效果异常，无法修复!2.三色的墨水屏在批量的时候，会存在一定的色差，这个是正常现象，建议将屏幕刷白朝上存放，使用前，先上电做几次刷白操作3.注意屏幕不能长时间上电，在屏幕不刷新的时候，要将屏幕设置成睡眠模式，或者进行断电处理。
IM502426Kick-Start Your Upchain ExperienceTomislav HorvatAutodesk, Product ManagerAndreja SchneiderAutodesk, Product ManagerDescriptionIn this class, you’ll discover what cloud data management is all about and how Upchain can h elp your organizat ion be more connected and efficient with a focus on user collaboration. We’ll help you understand what Upchain is, how you can start using it optimally in minimal time, and what you can achieve with the power of cloud collaboration between different stakeholders.About the speakersTable of ContentsKick-Start Your Upchain Experience (1)Discover what functional areas exist in Upchain and explore what different users can do in Upchain (4)Upchain landing page (5)Project details (12)BOM – Project Engineering bill of materials (15)Project management (17)Business processes (19)Documents (23)Project Settings (24)Discover how easy it is to import CAD data and explore user workflows from importing CAD data to having it consumed by downstream consumers (25)Demo flow (26)BONUS-1: CR configurable workflows (33)BONUS-2: Upchain one-pager (34)Discover what functional areas exist in Upchain and explore what different users can do in UpchainToday in Upchain users can have the following roles:1. Tenant Admin - Manages a company’s administration settings2. Project Manager - Manages projects and related activities.3. Mechanical Designer - Works with CAD systems to create mechanical parts andassemblies4. Lead Mechanical Designer - Builds BOMs and approves CAD models, also works withCAD systems to create mechanical parts and assemblies5. Electrical Designer - Works with CAD systems to create electrical parts and assemblies6. Lead Electrical Designer - Builds BOMs and approves CAD models, also works withCAD systems to create electrical parts and assemblies7. Buyer - Buys required parts or components8. Customer - Views released item data9. Customer Manager - Views released item data10. Requisitioner - Manages ordering parts11. Viewer - Views released item data (such as executives, and shop floor personnel). Throughout this handout, you will see notes for functions whose primary users are those roles. You might be using different naming for those roles or one person might be doing a combination of those functions.More information about roles and their assignments can be found on Upchain help here - About roles and their assignment.IMPORTANT NOTE:All tenant settings and workflows displayed here are Out-of-the-box settings. The tenant was not altered or configured in any way.Upchain landing pageThe page you will see after you have successfully logged in:F IGURE 1U PCHAIN LADNING PAGEThe landing page consists of the following areas – which can be seen in “Figure 2 Breakdown of landing page”:1. List of public projects, templates, and options to create new ones2. List of previously opened, quick search, help, Advanced search, access to other pages3. List of favorite projects4. Selected project details5. Activity Stream6. My favorite items list7. My assignmentsF IGURE 2 B REAKDOWN OF LANDING PAGEList of public projectsF IGURE 3 L IST OF PUBLIC PROJECTS AVAILABLE TO THE USER1. 2.3.4.5. 6.7.List of active projectsProject quick searchAvailable project templatesCreating new projectUpchain projects are storage places for your project data. They are containing all information needed to build that project.F IGURE 4C REATING A NEW PROJECTCreating new templateProject templates are used for creating standard project types. You can create a BOM structure that your business needs, create document categories, and much more.F IGURE 5C REATING A NEW TEMPLATEPreviously viewedList of previously opened objects in Upchain so users can quickly navigate back to them.F IGURE 6P REVIOUSLY OPENED OBJECTS IN U PCHAINQuick searchA quick search can be used for quick searching of activities, documents, and items.F IGURE 7Q UICK S EARCHAdvanced searchWith Advanced search, users can construct queries with different search criteria to find what they need.F IGURE 8A DVANCED SEARCHAdditional optionsInside of additional options users can:1. Update their profile page2. Access Administration if they have a tenant admin role3. Download latest plugins4. View manufacturersF IGURE 9A DDITIONAL OPTIONSUpchain AdministrationUpchain Administration is a place where Tenant administrators can modify system behavior, modify or create new workflows, invite new users, and much more.F IGURE 10U PCHAIN A DMINISTRATION PAGEFavorite projectsThis is a list of projects that are favored by the user for quick access. In the top-right section, the user can change from favorited to all active or draft types.F IGURE 11F AVORITE PROJECTSProject detailsProject details will show basic project information to the user without the need to go deeper into it.F IGURE 12P ROJECT DETAILSActivity StreamThe activity stream is a list of the last actions done inside of the users' tenant. It also gives the ability to post messages.F IGURE 13A CTIVITY S TREAMMy favorite itemsThis is the list of items that the user wants to have quick access to. This way they do not need to search for the item but they can come to it with one click.F IGURE 14M Y FAVORITE I TEMS SECTIONMy assignmentsMy assignment is the list of tasks that have been assigned to this user. It gives the user the possibility to easily see what tasks are pending his input.F IGURE 15M Y ASSIGNMENTS SECTIONProject detailsProject details will be loaded once we enter the project. It consists of two main sections: project details and project navigation.F IGURE 16M AIN PROJECT DASHBOARDProject detail – default dashboardOn Project details – default dashboard users can view:1. Project number, name, the project manager leading the project, status, and description.2. What is the project status, the health of the project, how many assignments are active,how many tasks are overdue, and what is the health of critical assignments. On the bottom right, they can also view the last activity on the project.3. With the dashboard option, users can switch from Default to Design dashboard.F IGURE 17 B REAKDOWN OF THE DEFAULT PROJECT DASHBOARDProject details – design dashboardUsers can open a designed dashboard where they can view:1. Recently created objects in that project2. Items that they have locked in that Project3. On the top right list of their assignments in the scope of this project4. On the bottom right list of recent project activity1. 3.2.F IGURE 18 B REAKDOWN OF THE DESIGN PROJECT DASHBOARDProject navigationProject navigation can be used to quickly access different parts of a project: 1. Project Dashboard – gives information about the project2. BOM – Engineering bill of material needed to build the project3. Project Management – used for project planning and tracking project status4. Business processes – access to project processes like change requests, investigationrequests, change notices, requirements, and quality assurance 5. Documents – project documentation6. Project Settings – project information, members, privacy, and statusF IGURE 19 P ROJECT NAVIGATION1.2.3.4.Option to expand/reduce left paneBOM – Project Engineering bill of materialsA project engineering bill of materials is what you would need to manufacture or purchase to build the project. The window consists of the following sections:1. BOM – used to quickly drill down to the needed part of the BOM2. Options to add Items to the BOM or export the whole BOM3. BOM filters – different representations of BOM4. eBOM (sBOM) – the detailed display of that part of BOM with all the metadata5. A contextual menu that is used to manipulate or view BOM, or generate BOM reports6. eBOM filters – different representations of eBOM data7. eBOM views – user set up BOM data visualizations8. Right pane – detailed information about selected Item1. 2.3.4.5.7.6. 8.F IGURE 20B ILL OF MATERIALS SCREEN3D ViewerUsers can view 3D model representation without the need for CAD software and get additional information from it.2D ViewerUsers can view supported 2D viewable without the need for CAD software and get additionalinformation from it.Project managementProject managers can plan out project execution and follow if the project is on track. They can easily view project critical path or available slack.F IGURE 23P ROJECT MANAGEMENTEach of the milestones, stage gates, or tasks will have a settable set of attributes, assignees, documents, etc.F IGURE 24E XAMPLE OF TASK ATTRIBUTESBusiness processesInside of business process section users can view, review and contribute to the following out-of-the-box processes:1. Requirements– The requirement management interface helps you keep track of yourrequirements, assign them to specific people, attach documents to them, link them to items, link them to other requirements and QA processes, and create child tasks and requirements.2. Investigation requests–Investigation requests (IR) are business processes thatdescribe a problem with a product. They initiate the change process and promote discussions within the organization or with partners, to help determine the impact of a change and the best possible solution.3. Change requests– A Change request (CR) is used to describe a suggestedenhancement or problem with a product, and is a written request that defines a set of affected items to be released. A change request can also be used to obsolete an item and update an item's maturity level.4. Change notice– You can send an assembly through a Change Notice (CN) workflow toorder it.5. Quality assurance– The quality assurance interface helps you keep track of your QAprocesses, assign them to specific people, attach documents to them, link them to items and create child tasks and QA processes.For further clarification please review the help articles on this Upchain help page.Investigation requestsUsers can create, view, review, and complete investigation requests. Investigation requests are driven by configurable workflows. It is possible to have multiple investigation requests for specific investigations or one bigger investigation workflow which then can branch into the needed investigation.This is an example of an active investigation request.The user is able to view with what annotation investigation request was created and for which item.Change requestsThe change request is used to propagate the change throughout the BOM. It is the mechanism to review and activate the change from development status to released one. The released status is a signal to downstream consumers that the Item version is ready for consumption. Item consumption might vary on Item maturity – e.g. Item that is released to be ordered for 3D printing is not ready to be mass produced.Example of completed CR:Documentation needed for the releaseAll user activities onthe CRAudit trail of each CR workflow stepChange noticeYou can send an assembly through a Change Notice (CN) workflow to:1. Order parts of an assembly or end item. The quantities recorded against each part reflectthe number of units required to create one unit of the assembly or end item.2. If you have extra parts in your warehouse, those parts can be put through a CN workflowto track their return.3. Get a list of orphaned items. Orphaned items are items that are in Upchain but outsideany BOM structure. This list can be used to identify returns or to redistribute.4. Transfer quantities ordered of an older version of an item to the order that contains thenew version of the item.F IGURE 27E XAMPLE OF A CHANGE NOTICEWith proper usage of CNs, requisition managers can track that all needed components have been ordered.DocumentsHere users can find all documents that are related to this project. They can attach, review, link, and revise project documentation. The recommendation is to keep all project documentation inEvery document can be check-out, released and revisedAll supported file formats canbe viewed in 2D viewerProject SettingsA project setting is a place where project administrators are adding new members to the project, enter project detail, manage the project lifecycle, and set the privacy of the project.Discover how easy it is to import CAD data and explore user workflows from importing CAD data to having it consumed by downstream consumersThe upchain CAD plugin has the same functionalities regardless of your system as long as its version is listed as a supported CAD version. You can see the supported CAD version in this help article - What does Upchain support?CAD plugin – home viewDemo flowCAD engineercreates contentRelease managerreleases contentProcurement getsBOM listCAD engineer clonesdesign for the new projectBOM is created for thenew filesBOM is uploaded forthe new filesReview process is startedfor the new ItemsUnreleased design issubmitted to releaseAttaching releasedocumentationItem is reviewed andready to be releasedDesign is releasedReleased design issend to CNItems are selected forrequisitionAttaching requisitiondocumentationSelected Items arerequisitionedCAD engineer selects a project using a project picker from which he wants to clone the design:F IGURE 31CAD PLUGIN PROJECT PICKERThe project is loaded displaying project information:F IGURE 32CAD PLUGIN PROJECT INFORMATIONThe user navigates to BOM, Project BOM, and finds the version he wants to clone. cBOM is a CAD representation of files that are found on CAD tool navigation. eBOM is engineering BOM which is needed to build that product. Project BOM is the same eBOM view that the user sees on the web application.F IGURE 33E XAMPLE OF LOADING EXISTING CAD DATA IN CAD PLUGINWhen the user is opening or checking out the files from the system he will see the download window screen. On that screen user can choose does he wants to download the drawings as well as CAD files. If he is performing checkout he will also be able to choose which files he wants to mark that is checkout by him – mark them that he is working on them.F IGURE 34 D OWNLOAD WINDOWAfter refresh user will see a cBOM tree populated with Items that correspond to the models that are designed in CAD software. Files are downloaded to the …c:/home“ folder in a flat structure.FIGURE 35 C BOM IN CAD PLUGINCopy option can be chosen by right-clicking the target assembly. After that user can choose either to clone or to replace the assembly.F IGURE 36 C OPY -C LONE OPTION IN CAD PLUGINAfter the clone operation (*Not registered*) mark can be seen by the files that have been selected for clone operation. Users can bring new files into the system by selecting …Check in“.F IGURE 37 C HECK -IN OF NEW DATA IN CAD PLUGINBefore uploading files user must specify a location of where will the files be in the BOM. That is done in the Item picker:F IGURE 38 C HECK -IN PROJECT PICKER IN CAD PLUGINFor unselected file new version will not be createdAfter selecting the project user will see the BOM wizard which will show him what data will be transferred into the system. User can also choose if he wants to create Items out of files. Cloned assembly is appended to the end of cBOM as a reference and it has a red X. That means it will not be linked to the new eBOM.F IGURE 39 BOM WIZARD IN CAD PLUGINAfter BOM wizard new Items are created in the system with development status. That means they have not been approved for downstream consumption. Users can send them to CR from the plugin by using the cart option:F IGURE 40 S ENDING DATA FOR RELEASE USING CAD PLUGINAfter sending the item to CR, CR will load it on the web where the CAD engineer uploads the needed release documentation and starts the release flow.FIGURE 41 P REPARING DATA FOR RELEASEOnce the change request has been started, the release manager needs to review if company release rules are being followed – e.g. correct documents describing the change are attached, and approve or reject the change. CR workflow can be configured in a way that it can be allowed to engineer to go back to the design and do certain modifications to it – e.g add missing notes to the drawing. Once items are marked for release they will change their state from development to release.F IGURE 42 R ELEASING BOM ITEMSCR mandatory fieldsOnce BOM is released it is ready to be used by downstream consumers. That can be achieved by sending it through a change notice. Change notice is used to mark in the Upchain system that certain BOM has been consumed – e.g. ordered item cannot be ordered multiple times.F IGURE 43C REATING A CHANGE NOTICEF IGURE 44C OMPLETED CHANGE NOTICEBONUS-1: CR configurable workflowsFor more information about what manual tasks you can automate with Upchain and how it can help you to achieve better efficiency through automated checks please look at the following class: TR502410 - How to Automate Release Process with UpchainDescription:While most of us can recognize the benefits of automated release processes, some may not know how to take advantage of those available within Upchain. We will demonstrate how to create automated data checks based on different data types and how to incorporate them into the release process. We will also show how one process workflow can be used for multiple data types and how the automated data checks follow different workflow paths based on the detected data type submitted into a release. In the end, we will show where within Upchain you can find audit trail information related to the release process.F IGURE 45C USTOM CR WORKFLOW FROM TR502410 CLASSBONUS-2: Upchain one-pagerUpchain is a cloud-based PDM solution that can help you get more efficiency out of your processes. It can automate your manual checks and streamline your design and release process.。
第一部分产品简介一、系统定位《东师理想教师备课系统》为中小学开展信息技术教育，推进素质教育提供了网络环境下的教材体系（教学资源），尤其是能满足国家新课程标准的教学资源，使学生在学习知识的同时，培养学生的实践能力、动手能力、综合思维能力，并提高学生的情感素养。
满足新形势教学对个性化、网络化、交互式、协作式的新要求，使现代教育技术真正进入课堂，成为一线教师的得力助手。
《东师理想教师备课系统》采用教育研究、一线教师、软件开发人员三位一体的开发模式，由国家基础教育实验中心、全国现代教育技术培训中心、东北师范大学理想信息技术研究院、东北师范大学和东北师大附中、附小等联合研制，充分保证了软件的科学性、实用性和有效性二、软件特点（一）生动性充分利用计算机多媒体技术，营造相关知识内容的学习环境，化抽象为形象，通过图、文、声、像并茂的表现手段，向学生提供形式多样、功能丰富的感性材料。
通过形象生动的画面，逼真的情境，悦耳的音乐背景，妙趣的益智游戏，把学生带入一个轻松愉快的学习环境，使学生主动探索，积极进取，易学、愿学和乐学。
小学部分的教学资源主要以启发学习兴趣入手，具有参与性、游戏性和协作性等特征。
中学部分的教学素材不仅提供知识点本身的内容，而且提供有关知识点的知识产生背景、知识演化过程、知识的具体应用等相关内容。
帮助教师启发、引导学生踏着前人探索科学规律的足迹进行思考，从而得出正确的结论或规律，提高运用所学知识解决实际问题的能力。
（二）开放性具有良好的开放性，允许用户利用它对不同方式、不同单位开发的素材进行系统、有机的整合。
整个平台对当前在网络上流行的诸多媒体格式给予了最大程度的支持。
（三）集中性多用户（可以以教研组为单位进行组织，也可以以学校为单位进行组织）可以将自己的资源统一收集并录入到一台服务器中去，然后所有用户共享服务器上的资源库资源进行备课和教案讲授等操作。
（四）灵活性1、资源组织灵活教学资源的组织不依照任何既成的教学体系，而是对学科知识基于知识点进行切割并组织资源，围绕着具体的知识点或单元，从不同角度提供多种类型的资源。
骨体验皮肤的温度觉问习题：人体能感到温度的变化，离不开皮肤中的温度觉感受器。
当环境温度低于皮肤温度时会感到冷；当环境温度高于皮肤温度时会感到热。
怎样利用实验的方法来体验温度觉？施行方案：材料：3个烧杯、适量的温度不同（冷、温、热）的水。
方法：①用3个烧杯分别装上冷水、温水、热水；②将左手食指放入冷水，同时将右手食指浸入热水中，3分钟后将两只手指同时取出；③再将手指同时浸入温水中，分别领会感觉。
冷水热水温水右手感觉热冷左手感觉冷热现象分析：（1）左手皮肤温度高于冷水温度，人觉得冷；（2）右手皮肤温度低于热水温度，人觉得热；（3）3分钟后两手同时放入温水中，左手皮肤温度低于温水温度，人觉得热；右手皮肤温度高于温水温度，人觉得冷。
教学目的知识目的1.知道运动系统的组成。
2.能说出骨的各构造名称及作用。
3.说明骨的成分及其物理特性。
4.知道骨的生长的基础知识和体育锻炼对骨的影响，以及骨折急救的知识。
能力目的1.明确观察目的，有序地观察长骨的构造，分析各部分构造的功能，培养学生观察及分析能力。
2.通过鉴定骨的成分实验，及对实验观察的分析和讨论，培养学生的实验能力和分析、综合的思维能力情感目的1.通过骨的构造及功能的学习，使学生树立构造与功能相适应的辨证观点。
2.通过设计骨成分的实验，及对实验现象的观察和分析，培养学生实事求是的科学态度。
3.自觉养成正确的坐立行走姿势。
4.在分组活动中，使学生学会互相协作。
教学建议（一）知识构造体系（二）教材分析：关于骨的构造和功能的内容，是本章的重点之一。
而骨的基本构造和功能，骨的成分是本节的教学重点，鉴定骨的成分；骨的成分与物理性质的关系是本节的难点。
按照从感性到理性的认识规律，先让学生观察实物（长骨），及实验（鉴定骨的成分）获得感性知识，再结合讲解来突破重点和难点。
（三）教法建议：骨的构造可以采用边观察实物边讲解的教学方式进行，在让学生观察长骨的构造时，可以先让学生想想人体长骨所在的位置，它应该承担什么作用，这个作用需要人体长骨具备什么样的构造，是中空的管状构造还是实心的构造。
日本語VISUAL PRESENTER Accessories取扱説明書ご使用になる前に本取扱説明書をよくお読みください。
INSTRUCTION MANUALPlease read this instruction manual carefully before using this product.MANUEL D'INSTRUCTIONSVeuillez lire attentivement ce manuel d’instructions avant d’utiliser ce produit.BEDIENUNGSANLEITUNGBitte lesen Sie dieses Bedienungshandbuch aufmerksam durch, bevor Sie dieses Produkt benutzen.■ Read InstructionsAll the safety and operating instructions should be read before the appliance is operated.■R etain InstructionsThe safety and operating instructions should be retained for future reference.■H eed WarningsAll warnings on the product and in the operating instructions should be adhered to.■ Follow InstructionsAll operating and use instructions should be followed.■ CleaningUnplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.■ AttachmentsDo not use attachments not recommended by the product manufacturer as they may cause hazards.■ Water and MoistureDo not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.■ PlacementDo not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.■ VentilationSlots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.■ Power SourcesThis product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.■ Grounding or PolarizationThis product may be equipped with either a polarized 2-wire AC line plug (a plug having oneblade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. The 3-wire grounding type plug will fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. ■ Power-Cord ProtectionPower-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. ■ LightningFor added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. ■ OverloadingDo not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.■ A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. ■ Object and Liquid EntryNever push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. ■ ServicingDo not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. ■ Damage Requiring ServiceUnplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:• When the power -supply cord or plug is damaged.• If liquid has been spilled, or objects have fallen into the product. • If the product has been exposed to rain or water.• If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. • If the product has been dropped or damaged in any way.• When the product exhibits a distinct cha nge in performance - this indicates a need for service.■ Replacement PartsWhen replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.■ Safety CheckUpon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.■ HeatThe product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.■ This product includes a Fluorescent Lamps component that contains mercury. Please consult your state and local regarding proper disposal or recycling, and do not place in the trash.The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the presence of uninsulated“dangerous voltage” within the product’s enclosure that may be ofsufficient magnitude to constitute a risk of electric shock to persons.The exclamation point within an equilateral triangle is intended toalert the user to the presence of important operating andmaintenance (servicing) instructions in the literatureSA 1965FOR UNITED STATES USERS: INFORMATIONThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.USER-INSTALLER CAUTION:Your authority to operate this FCC verified equipment could be voided if you make changes ormodifications not expressly approved by the party responsible for compliance to Part 15 of the FCC rules.WARNINGTO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.■Be sure to use the connection cable and the AC adapter supplied with the product.■The supplied power cable, the AC adapter, and expansion cable are designed to be used for the product only. Do not use them for other products.■Be sure to use the AC adapter applicable to your local power specifications. If the product was sold in Japan, use the AC adapter sold with the product with 100 VAC and 50 or 60 Hz.■When storing the product, do not leave it under direct sunlight or by heaters. It may be discolored, deformed, or damaged.■Do not place the product in any humid, dusty, salt bearing wind, or vibrating locations.Use it under the following environmental conditions:Temperature: 0°C - 40°CHumidity: 30% - 85% (No condensation)■Use a soft, dry cloth for cleaning.Do not use any volatile solvent such as thinner or benzene.■Follow the guidelines below to prevent the product from dropping or overturning.• Use the product on a stable base, desk, or table. Do not place the product on an unstable base or slanted location.• Place or wire the product to preve nt the power cable, the AC adapter or the video cable from pulling.■Pay careful attention when using (including setting-up and storing) or carrying the product.■If the product is used for longer than the warranty period, its performance and quality may deteriorate due to the lifetime of its parts. For parts replacement (on chargeable basis), consult the dealer from whom you purchased the product or our branch/office near your location.■The contents of this document are subject to change without notice. The latest version can be obtained from the following MX-1 Official Website:https:///■It is prohibited under copyright law to use or copy any part or the whole of this document without our prior written consent.■ELMO shall not be liable for any claim for damage or loss of earnings or any claim raised by a third person due to the use, malfunction or repair of the product.■ IMPORTANT SAFEGUARDS (14)BEFORE YOU USE ............................................................................................................................................. 18 ■ TABLE OF CONTENTS ..................................................................................................................................... 19 ➊ PACKAGE CONTENTS . (20)■ABOUT MX-1 CONNECT BOX (20)➋ CONNECTING THE MX-1 CONNECT BOX (21)■VIDEO OUTPUT AND CAPTURE SIZE ........................................................................................................... 22 ■CONNECTING TO A PROJECTOR OR MONITOR (23)➌ TROUBLE SHOOTING (24)■SYMPTOMS AND CONFIRMATION (24)➍ SPECIFICATIONS ................................................................................................................................................ 25 ➎ TRADEMARKS AND LICENSES .. (26)The items below are included with the product. If any item is missing, contact the dealer from whom you purchased the product.■ABOUT MX-1 CONNECT BOXBy connecting the MX-1 to the MX-1 CONNECT BOX, you can display the camera image to a projector or monitor. The MX-1 does not have HDMI port and RGB port. The MX-1 CONNECT BOX allows you to use HDMI port and RGB port with the MX-1.REAR■VIDEO OUTPUT AND CAPTURE SIZEThe video output of the MX-1 varies according to the status of the Resolution/Output mode and whether the MX-1 CONNECT BOX is used or not. The MX-1 can capture aspect ratio ①. Pay attention to the shooting conditions.◆Video output when using the MX-1 CONNECT BOX◆RGB output and HDMI output when using the MX-1 CONNECT BOX・The video output is automatically set to 720p when a monitor which does not support 1080p is connected.・When HDMI output is possible, both RGB output and HDMI output are output in the same※When video output is HDMI, works as the selection switch between Full and Normal.※Setting method of arms, The maximum angle of view capture will change.NormalFullAspect ratio■CONNECTING TO A PROJECTOR OR MONITORBy using the MX-1 CONNECT BOX, you can connect the MX-1 to a projector or monitor.①Connect a projector or monitor to the MX-1 CONNECT BOX via the HDMI cable or RGB cable.②Connect the supplied DC power cable to [ ]. Connect the USB plug to the AC adapter. Then connect it to the wall outlet.③Connect the MX-1 to the MX-1 CONNECT BOX via the supplied Expansion cable. ④The MX-1 and MX-1 CONNECT BOX will be powered on. (LED of MX-1: Blue lighting)■SYMPTOMS AND CONFIRMATIONCheck the following items. If any abnormality is found, consult the dealer from whom you purchased the product or our nearest branch/office.on the Operating panel of the MX-1. Cancel the freezeAbout long-term usage of this productDue to the lifetime of its parts, if the product is used for longer than the warranty period, its performance and quality may deteriorate. In this case, we will replace the parts for a charge. Consult the dealer from whom you purchased the product or our nearest branch/office.、Image Mate are the registered trademarks of ELMO Co., Ltd. HDMI、logo and High-Definition Multimedia interface are trademarks or registered trademarks of HDMI Licensing LLC.All other company/product names described in this manual are trademarks or registered trademarks of their respective companies. This product is licensed under the AVC Visual Patent Portfolio License (AVC Video) for the personal andnon-commercial use of a consumer to (i) play AVC Video that was recorded by a consumer engaged in a personal and a non-commercial activity and/or, (ii) play AVC Video that was obtained from a video provider licensed from MPEG-LA, LLC. Additional information including that relating to promotional and commercial uses may be obtained from MPEG-LA, LLC.6X1VLBA11 R0-Nix。
cation of solutions is an approved concept for reutilization Modeling with 3D CAD systems has a positive effect in many respects. Although quick creati-on of new models without considering existing design solutions increases the administration costs. Therefore many companies are looking for possibilities to improve the reutilization of parts and assemblies.classmate CAD is a software tool for a fully automated classifi cation of 3D CAD models. It is an extension to existing CAD- and PDM-systems to automatically fi ll a classifi cation with correct feature values. In the process image information like contours, viewer formats and thumbnails are automatically derived.classmate CAD classifi es 3D CAD models in order to disburden designersModeling with 3D CAD systems has a positive effect in many kinds. 3D CAD models increasingly provide more precise information than 2D drawings ever could. Issues like collision detection and manuf-acturing problems can be identifi ed and eliminated during the design process. New models can be derived from existing solutions within a few seconds.With every new design solution the administration costs in the following company departments grow. Expenses occur for writing master data information, bills of materials, process plans, proof and documentation of quality assurance, service information and storage costs during the business process.In order to reduce these costs, companies have been trying to increase the reutilization of existing solutions. For this purpose PDM systems are being implemented. They are indeed necessary for data adminis-tration of CAD models, drawings and other documents. However the task “reutilization by search and retrieval from a huge data stock” is insuffi ciently solved by PDM systems.Missing naming conventions and classifi cation information prevent the quick retrieval of information. Parts are often stored under nonrepre-sentational names as shaft, bolt or plate without further description and therefore cannot be identifi ed when searching for the name.With classmate CAD simus systems offers a proven solution for using the common advantages of a detailed classifi cation without mainte-nance expenses.classmate CAD automatically analyzes 3D CAD models and extracts feature information like dimensions, contours, holes, patterns, chamfers and notches. This information is used to fi ll up the classifi cation and the feature list. Furthermore image information like schemes, 2D drawings and 3D viewer formats are assigned or derived.These results are automatically generated without additional efforts of the designer. No specifi c modeling technique is needed. The designer himself creates his design solution as usual and saves/releases it to the PDM system. Controlled for example by the release status in the workfl ow, classmate CAD generates the classifi cation information. The results are available within seconds and stored to the database. This implies that the business processes do not need to be adapted for classmate CAD and the tool can be established within a short span of time.classmate CAD for an automated classifi cation of 3D CAD modelsClassifiClassifi cationclassmate CAD works with a highly effi cient rule base. This rule base is built out of the typical geometries existing in mechanical engineering and plant construction. Customer-specifi c requirements can be easily integrated into the rule base. Subsequently the 3D CAD models of the customer are analyzed in a batch process so that fi rst results are available in a few days.The geometrical classifi cation can be combined with a functional classi-fi cation. Any functional parameter (for example force, power, type) can be used to design additional classes and features.The presentation of the results depends on the used search client. Ifthe PDM- or ERP system does not have any module for storing classi-fi cation information simus systems offers the search client classmate FINDER. classmate FINDER provides various search and retrieval functions especially with detailed graphical information. Many standar-dized interfaces to existing ERP and PDM solutions already exist, e.g.: SAP Agile DBworks MaxxDBPDMWorks EnterpriseProductstream ProfessionalBasing the search on high-quality data a duplicate analysis can now be established easily. classmate FINDER includes an effective function for analyzing huge databases for duplicates. A classifi ed and simplifi ed database makes it easy to search for existing parts within seconds and therefore reutilization will increase extensively.Reutilization makes the database increase slower which results in considerable cost savings.Classifi cation with classmateCAD offers sophisticated search and retrieval functionsclassmate CAD automates the administration of classifi cation dataclassmate CAD offers the possibility to use an extensive customer-specifi c classifi cation with detailed feature lists without any additional effort for the designer. Automatically generated 3D viewer formats, thumbnails and schemes top off the function volume. If reasonable thegeometric classifi cation can be combined with an individually designed functional classifi cation. classmate CAD analyses the 3D CAD models independent of the modeling and does not need any further parameter lists or predefi ned features.simus systems GmbH | Haid-und-Neu-Straße 7 | 76131 Karlsruhe | Deutschland**********************||tel +49 (721) 83 08 43 -0 | fax +49 (721) 83 08 43 -77Your requirementsImprovement of transparency of product data Improved search options for the designers Quick retrieval of similar parts No additional effort for the designers Automatic fi lling of the classifi cation Automatic fi lling of the feature listAutomatic generation of viewer formats and thumbnails Elimination of duplicates Few expenses for the integration Short project durationAccurately defi ned project budgetOur offerAutomatic analysis of 3D CAD modelsAutomatic classifi cation of 3D CAD models into a customer specifi c classifi cation structure Automatic fi lling of customer-specifi c feature lists Possibility to combine a functional and a geometrical classifi cationA lot of interfaces to databases and systems, for example SAP PLM, Agile, Productstream Professional Subsequent extension of classifi cation structure Combination with the search client classmate FINDER Experience in projects with customers from small or medium-sized enterprises to huge corporationsWe are looking forward hearing from you.。
参展商手册亲爱的参展商:本手册主要为参展商提供有关2023年11月29日至12月2日于上海虹桥-国家会展中心（上海）举行的Automechanika Shanghai - 上海国际汽车零配件、维修检测诊断设备及服务用品展览会的各项数据及细则，以及申请有关服务的表格。
1．主办单位法兰克福展览（上海）有限公司、中国机械国际合作股份有限公司2．展会地点国家会展中心（上海），中国·上海北门，崧泽大道333号；西门，诸光路1888号；南门，盈港东路168号；东门：涞港路111号3．展会日期2023年11月29日至12月1日09:00 - 17:002023年12月2日09:00 - 15:00（严禁提前撤馆！）4．布撤展日期布展：2023年11月26至28日（至18:00）撤展：2023年12月2日，15:30 - 22:005．联合参展a.主办单位接受与参展商有联合经营或属于海外总公司/在中国的经销商/合资伙伴/代表处等关系的企业共同参展，须报名时递交联合参展申请函及相关材料，且获得主办单位的书面确认；b.获批的联合参展须办理应有的参展手续（见下第7项）；c.任何未展前报备且获批的联合参展，一律视作无关拼展，主办单位有权拒绝该企业参加展览会，并对于因此所造成的经济损害对该企业保留索赔及惩罚的权利；d.禁止无关拼展；6．标准展台必填表格表格3 - 参展商胸卡表格4 - 标准展台楣板7．光地展台必填表格表格3 - 参展商胸卡表格5 - 光地展台设计申请表格6 - 电力供应注意事项：a.展台内所有结构、组件、装饰及展品均不得高于6米；b.所有高度超过4.5米（含4.5米）的展台须由大会指定的审图公司另行审批结构安全；c.所有双层展台须由大会指定的审图公司另行审批结构安全；双层展台最小面积54平方米，且展台二层结构面积不得超过一层展台面积的七成；d.光地展台必须购买展台责任保险：单独展台：人民币400元/保单；展团展台：人民币400元/200平方米，每增加200平方米，保费增加人民币400元；e.所有电气操作人员必须持有有效的电工安全操作证；f.场地管理费：人民币30元/平方米；g.展台综合管理押金（可退还）：人民币8,000/100平方米以下（含）展台；人民币15,000/100平方米以上展台；人民币15,000.00/展团展台；h.联合参展的参展商均须单独申请额外会刊刊登（见表格11）、电箱、购买保险；i.参展商及其搭建商须确保遵守本《参展商手册》中各项展台搭建要求、规定事项、消防规定、安全条例及参展条例。
I.L. 17408Revision CInstructions for Type WPONI Product-Operated Network Interface Module Used with Advantage StartersFig. 1 Advantage WPONI Module DEFINITIONSIMPACC - The communications system which includesCONI cards, WPONI modules, Advantage motor control-lers, twisted pairs, PONI cards, IQ products, etc.INCOM - The network that is part of the IMP ACC system.Advantage Motor Controllers - Advantage contactors,starters, and overload relays.THE WPONI MODULEA T ype W Product Operated Network Interface (WPONI)Module is designed to communicate information from an Advantage motor controller to a computer control station.The WPONI module provides remote control and permits the microprocessor in the solid state current-sensing unit of a motor starter to transmit data regarding the starter via an INCOM network that is part of an Integrated Moni-toring, Protection, and Control Communications (IMP ACC)system. A typical network consists of twisted pairs daisy-chained as shown in Figure 2 to a remote personal-size computer. The WPONI module is powered by the product it is attached to and needs no other source of power.Each WPONI module has three hexadecimal (digits 0through 9, plus A through F) selector switches that must be used to assign a unique address to each module in the INCOM network. A light emitting diode (LED) located below the three address switches lights while the WPONI module is transmitting information in to the IMP ACC net-work. See Figure 1. The LED does not light while the WPONI card is receiving instructions.Effective 9/98WPONI CAPABILITIESA WPONI will respond to commands to:-Turn a starter or contactor ON or OFF .-Cause an overload relay to TRIP , thereby requiring a RESET to resume operation.-RESET the starter or overload relay after it has tripped.A WPONI will transmit the data, identified by the WPONI address, to a central control computer equipped with a CONI card to display the following:-Status of the device to which the PONI is connected, i.e., ON, OFF , or TRIPPED.-Current in each motor branch circuit conductor (line current).-Percent of phase imbalance, where percent imbalance is the difference between the maximum line current and the minimum line current divided by the overload trip current, expressed as a percentage.-Motor running overload.-Control voltage.-Overload protection settings.-The cause of a TRIPPED condition, i.e., overload,ground fault, or extreme phase imbalance (phase loss).-The time the starter or overload relay tripped.TRANSMITTING DEVICESA WPONI module can be used to transmit data from and receive instructions for Advantage contactors, starters,and overload relays.The WPONI modules may be intermixed with PONI cards and other transmitters compatible with an IMP ACC net-work operating at 9600 baud. See Figure 2.Effective 9/98I.L. 17408Page 3CUTLER-HAMMER4201 North 27 Street Milwaukee, WI 53216Effective 9/98OPERATION CHECKAfter the IMPACC system has been installed, check the operation of each WPONI and PONI card by applying power to the parent unit and issuing an IMP ACC command through the system to each WPONI and PONI card in turn using the selected addresses. If the product responds by flashing the LED (OFF to receive, ON while transmitting,OFF to receive), all connections are correct. If the LED remains OFF , please the WPONI or PONI card.。
SinoColorSoftwareUSER'S Guide非常感谢您购买此产品。
- 为确保正确和安全使用，并充分了解本产品的性能，请务必仔细阅读本手册完全存放在安全的地方。
- 禁止未经授权复制或转让本手册的全部或部分内容。
- 本手册的内容和本产品的规格如有变更，恕不另行通知。
- 本手册和产品已尽可能准备和测试。
如果您发现任何印刷错误或错误，请通知我们。
- Sino Color Corp.对因使用此产品而可能发生的任何直接或间接损失或损害不承担任何责任产品，无论本产品是否有任何失败。
- Sino Color Corp.对任何可能发生的任何直接或间接损失或损害不承担任何责任使用此产品制作的文章。
Important Notes on Handling and UseThis machine is a precision device. To ensure the full performance of this machine, be sure toobserve the following important points. Failure to observe them may not only result in loss of performance, but may also cause malfunction or breakdown.Machine您可以从以下网站下载获取机器信息。
https:///Installation Requirement（Please read carefully）Install in a quiet, stable location offering good operating conditions. An unsuitable location can cause accident, fire, faulty operation, or breakdown.Install the machine in a location that is level, stable, and able to bear the weight of the machine.The total weight of the machine may reach 400kg or more(1.8m:280kg 3.2m:480kg). Installation in an unsuitable location may cause a major accident, including tip over, fall, or collapse.Install in a clean, brightly lit location.Conduct operations in a clean, brightly lit location. Working in a location that is dark or cluttered may lead to an accident, such as becoming caught in the machine as the result of an inadvertent stumble. Position so that the power plug is within immediate reach at all times.This is to enable quick disconnection of the power plug in the event of an emergency. Install the machine next to an electrical outlet. Also, provide enough empty space to allow immediate access to the electrical outlet.Ensure adequate ventilation for the work area.Failing to perform ventilation may result in a health hazard or danger of combustion due to ink fumes. Temperature and HumidityKeep the room temperature between 20-30C, hundity 40-60%. Air conditioner and humidifier may be required. Keep a distance from strong radiation field. The floor must be level.Maintain the specified temperature and humidity even when the machine is not in use. If temperatures are too high or too low, it may cause malfunction.Electrical requirementElectrical requirement writes on a metal tag on the back of the printer. Find it to confirm if your printer supports 220V or 110V. A transformer is needed if your country standard is different. The printer must be well grounded.UPS and voltage stabilizer is highly recommended.（Not included in printer price. Need to buy separately）ComputerComputer requirementBasic requirement: CPU: 2.5 GHzor higher Memory: 2GB or higherHard Disk: 200GB or higherOperating system: Microsoft Windows XP / Windows 7 Ultimate Edition / Windows 10 Recommendatory requirement:CPU: 3.5 GHz or higherMemory: 4GB or higherHard Disk: 500GB or higher (NTFS format)Operating system: Microsoft Windows 7 Ultimate EditionNOTICE: Suggest user format your hard disk into 2 partitions (NTFS). The first partition is used for installing OS and other software, the second partition is used to save pictures and work files.InkInk cartridges come in various types.Use a type that is compatible with the machine.Never subject to impact or attempt to disassemble.Never drop or shake forcefully. The impact may rupture the internal pouch and cause the ink to leak. Never attempt to disassemble.Never attempt to refill the other ink.If ink gets on your hands or clothing, wash it off as soon as possible. Removal may become difficult if allowed to stand.Storage: Store unopened in a well-ventilated location at a temperature of 0 to 40°C (32 to 104°F)目录 Directory一、机器部件说明二、电脑USB驱动的安装 USB Driver Installation2.1 启动机器Start Machine2.2 电脑连接Connect PC三、墨囊及喷头安装 Damper and Printhead Installation3.1 墨盒墨水安装Installation of Ink carriage and ink3.2 喷头安装墨囊的颜色顺序 Sequence of damper installation3.3 软件套色表墨序 Software color offset table ink sequence3.4 喷头安装 Printhead Installation四、软件介绍 Software Intrduction4.1 软件打开控制4.2 校准齿轮比（X,Y,Z）4.3 吸墨设置 Ink pump setting4.4 清洗设置 Cleaning setting4.5 软件调试步骤Software Calibration4.5-1 垂直校准 Vertical Calibration4.5-2 水平较准 Horizontal Calibration4.5-3 步进较准 Step Calibration4.5-4 双向较准 Bi-Dir Calibration五、打印 Print5.1 载入打印文件 Upload the printing file5.2 打印属性Printing Characteristic5.3 开始打印 Start Print六、软件功能介绍 Introduction of The Function of Software6.1 标题菜单栏 Title Menu6.2, 参数设置界面“Parameter”Interface6.3 软件校准 Maintenance6.3-1 偏差校准 Bias calibration:6.3-2 运动设置：Motion Settings:6.3-3 清洗设置,电压设置 Cleaning option And Voltage Setting:6.3-4 基础设置 Basic Settings:七、系统菜单 System menu:八、常见故障处理 Frequent Trouble-Shooting一、机器部件说明Machine parts introduction：Machine安装完打印机后，我们现在需要进行对打印机的部分部件的了解。
