DYNA-SM32XUSB2.0 flash media controllerVersion：3.0Introduce:The program is for SMI SM32X’s Mass Production. This tool can test up to 16 devices at once. Platform:There are two drivers for different platform:●win98_factory_driver:⏹Windows98●winXP_factory_driver:⏹Windows 2000⏹Windows XP环境设置:●设置功能：:(see the Fig.1)Fig. 1 Setting Function of SM32X Production ToolIt will allow the user to change CID information.⏹Password Entering:(see the Fig. 2)Fig. 2 Password entering for 「Setting」Function.The system default password is「320」. The wrong password led user to edit the「Begin Serial」and「End Serial」fields only.⏹Loading the INI File:(see the Fig. 3)12Fig. 3 Loading the INI file for「Setting Function」.Loading an 「ini」file which saved in the past or the system default .The system default ini file is located in the same directory with application executable file. If no setting executed, the setting will be according to the「default.ini」file.Configuration:(see the Fig. 4)Fig. 4 The main frame for「Setting Function」There are several parts in the setting main frame, all field descriptions are presented in the Table 1.Table 1 The field descriptions for「Setting Function」.●Config HUB Function:(see the Fig. 5)Fig. 5 The 「Config HUB」function of SM32X Production Tool.The function supports the sequence configuration for specific USB hub port. The user can detect the error USB storage device is failed in which port.Configuration Step:Step 1、 In the Fig. 6, if the configuration is the first time and the device port labels existed 「O」or you want to reset the port mapping, press the『Scan USB』button withoutplugging any UFD to reset the configuration.Step 2、 Plugging the prepared USB storage device into USB hub port, the OS will install the default device driver for this USB storage device.Fig. 6 The process of the first time to configuration in this condition.Step 3、 According to your OS version, ran the specific USB storage device driver existed in the 「winXP」、「Win2000」or 「win98_factory_driver」directory, and pressthe 「SMI Factory Driver」button for driver installation as Fig. 7. If you want toremove the specific USB storage device driver, press the 「Mass Storage Driver」button in the Fig. 7. The driver will become the system default and this applicationprogram will not support exactly.Fig. 7 The installation for Specific USB storage device driver.Step 4、 Pressing the「Scan USB」button to setup, then the USB hub port will mapping to each button when the label become「O」in the Fig. 8. Otherwise it will pop-up anerror message in Fig. 9.Setup Success on Port-1 to Port-5Fig. 8 USB Port mapping to test program successFig. 9 Error Message for「Not Find any device on HUB」Test Steps:Step 1、Plugging the prepared testing devices into the USB hub ports that configured according to「Config HUB」function.Step 2、Because test program using the specific driver, so that the「Factory Driver」must be selected, and press the「Scan USB」for device detect, the button will show the greenicon if plugged USB device and configured with「Config HUB」function. Otherwise arenot changed, the Fig. 10 presents the sub-steps for upper process and result.3231Fig. 10 The result of「Scan USB」using「Factory Driver」Step 3、After pressing the「Start」button, the program would start testing according to the test items selected in Fig. 4. In Fig. 11, the each port presents the Red「X」and 「PretestFail」in the『Status』field besides Port-1. It presents the『FAIL』message in the right-topposition because the『Port-2 to Port-5』is failed. If all ports pass the production, the right-top willpresent the『OK』message.Fig. 11 the result of testingOther Buttons and Key points:●ToolsThe specific tool for mass production.(Fig. 12)⏹Mixing FilesCombining the selected DBF、ISP and pretest file into 「CMB」file.⏹Decode CMB FileDecoding the「CMB」file into specific DBF、ISP and pretest files.⏹Create UDisk ImageCreating the Non-FAT format preload image.⏹COM Port ConnectConnecting to COM port for production controlling with 「Auto Handler」.⏹Multiple Erase AllFor multiple erase all bad block for restoring bad block.Fig. 12 The tools function and dialog presented.●Dialog Option:Setting the UI for『Fonts Size』、『Button Hide』、『Num of Button』and field show or hide control for the list.(See Fig. 13 ).⏹Font:Setting the font size from 12 to 28.⏹Button Hide:Hiding the buttons and resizing list box into frame size.⏹Num of Buttons:Setting the number of button to display.⏹Progress:Enable the「Progress」field in the list box or not.⏹Status:Enable the「Status」field in the list box or not.⏹Capacity:Enable the「Capacity」field in the list box or not .⏹Serial Number:Enable the「Serial Number」field in the list box or not.⏹VID/PID:Enable the「VID/PID」field in the list box or not.⏹Flash ID:Enable the「Flash ID」field in the list box or not.⏹Bad Block:Enable the「Bad Block」field in the list box or not.⏹Inquiry:Enable the「Inquiry」field in the list box or not.⏹Write Protect:Enable the「Write Protect」field in the list box or not.Fig. 13 Dialog Option Function.●Others Setting⏹Extra Setting(Fig. 14)It’s used to specific application. These applications are:⏹uDisk Partitions:◆Setting the size of Reserve Zone、Hidden Area and CDROM.⏹The Software USB serial number:◆Used to identify the internal product. It’s not identical to USB serial number.⏹Preload file into Binary Area:◆There is a simple file system in the ReserveZone, it can support file preloadinto the reserve zone.⏹Security Disk Support◆There are two modes:●Mode-A: The Public/Security mode, just one disk display in the sametime.●Mode-C: The Public+Public/Security mode, there are two disks display inthe same time. The second disk is identical to mode-A.⏹Server Generating SN support◆It needs the socket server to communicate with our MPTool. Just setting theIP address and Port number, out MPTool will negotiate with the server duringproduction.⏹Enable Floppy Support◆Setting the one disk become floppy, it also support floppy format to FAT12and preload functions.⏹COM Communication Settings◆Setting the COM port number which connected to「Auto Handler」andEnable/Disable the COM port function.⏹Log file settings:◆Setup the format of log file and customize information.⏹Enable Unique Serial Number:◆If enable this function, MPTool will retrieve the serial number from this ini fileonly, although used the different INI files.Fig. 14 The Extra Setting Dialog● Debug Button:It ’s for internal debugging using.● Read CID:Press the 「Button 」or 「row item 」of mapped USB hub port, the information for device plugged in this port will be presented in Fig. 15. All fields are defined in Table 2.Fig. 15 The related information of CID. Table 2 The field Descriptions of CID .INI SettingBelow item not show on setting UI , must modify「ini」file :(1)CUSTOMER(2)READCLK(3)WRITECLK(4)RESERVEZONEThe all field in「ini」file description in Table 3.Table 3 The all field descriptions in the「INI」file.。
SMI慧荣⼯⼚驱动安装⽅法Install SMI Factory Driver Guide1Install SMI Factory Driver:1.1Running the「SMI Factory Driver Update」Program as bottom figure.You can choosethe SMI Factory Driver for SMI device production.运⾏量产⼯具⽬录下的\UFD_MP\FactoryDriver\WinXP\SMIInfUpdate.exe红⾊字体选择你操作系统的⽬录1.2After you install succeed,it may show the「Install OK」message as bottom.安装SMI⼯⼚驱动(SMI Factory Driver)，并提⽰成功1.3It will insta ll「SMI Factory Driver」when you plug-in the SMI Device until you changeto「Mass Storage Driver」.The alert is presented in the bottom:这时可以插⼊U盘，会提⽰找到新硬件，并要安装驱动2Step by step of driver installation when detected SMI device.2.1The installation of SMI Factory Driver presented in the bottom:按以下图⽰安装⼯⼚驱动2.2In these steps,you had installed driver successful.It will show th e「Find new Hardware」Message in the system tray.⼯⼚驱动安装成功2.3If you have several devices,you have to press each dialog for SMI Factory Driverinstallation.But if you want to avoid these messages for installing,you just openthe「SMI Mass Production Tool」.It will help you to press the each button you needed. 3How to use SMI Factory Driver: 3.1After you plugged all SMI Devices,you had to run「Config Hub」to setup the mappingbetween port and USB device.It presented in the bottom.3.2In current,you can press the「Scan USB」to search the mapping port is success orfail.It presented as bottom:3.3Finally,The「SMI Mass Production Tool」will showed the detected Device with『Factory Driver and HUB』option after you pressed the『Scan USB』button.选择量产⼯具右下⾓的“使⽤⼚家驱动与HUB”点击“扫描USB”就可以找到你的U盘并重新量产了213.4If you want to leave the production for SMI Devices,you must change the driverinto「Mass Storage Driver」with『SMI Factory Driver Update』presented as bottom:量产完成后你可以重新运⾏SMIInfUpdate.exe，退出⼯⼚模式”，提⽰卸载成功点击“Mass Storage Driver3.5If changed success,it will show the「Uninstall OK」message as bottom:。
SM3257ENLT量产教程本人U盘，突然写保护了，删不了，写不进去，试了各种方法都不行，最后只能量产了，可是自己不太懂啊，就网上找教程，结果看到的教程都半斤八两，都不能解决我的问题，害我废了很多的周折，最后我终于量产成功了，现在分享给大家。
解决：1、U盘SM3257ENLT量产失败，FlashID notfound in datebase的问题2、删除占空间的CD-ROM驱动3、还有没人告诉你的镜像文件是啥量产要用到的工具：1、ChipGenius：用来查看自己U盘的型号的链接：/s/1pK7MoZ5 密码：lb36 2、对应型号的量产工具：这里是慧荣SM3257ENLT 的（有很多的版本和型号，一定是对应你的型号的）链接：/s/1c2lytR6 密码：w4443、量产镜像：也就是CD-ROM驱动(这个有很多种，下载一个就可以）链接：/s/1cmOvqm 密码：5lux下面开始操作了1先把自己的U盘插到电脑上，打开下载好的ChipGenius，运行2查看自己的型号，我的是SM3257ENLT - ISP 140704-AA-3.去下载对应的量产工具，本文章提供的不一定适合你的U盘，但可以先尝试，下载好后解压到你的电脑，一定要解压。
解压后运行4打开后运行，这时候会出现你的U盘，如果不能出现，说明你的量产工具对应的型号不对，去网上重新查找下载型号。
5接着进行设置点一下1，就会出现2的窗口，密码是320，这个一定要输入，之后确定，出现下一个窗口，不要动直接选择打开。
6这时候会出现下列情况，1处为USB-zip，2处不动，重点是在3处，把前边打上对号，现在后边的小方框，然后找到自己下载的滤镜，（就是上文要准备的3），找到之后打开，然后选择ok关闭。
7之后选择，然后就开始量产了，好了之后右上方会有一个ok的样式。
8一定会有朋友出现FlashID notfound in datebase这个是什么原因呢，就是你下载的量产工具和你的u 盘的型号不对应，再去网站找去，版本型号有很多，看这个地方有2.5.27，也有2.5.30，一级一级的尝试，肯定会成功的。
