FLN2024使用说明书

Keysight N9320B

RF Spectrum Analyzer

9 kHz to 3.0 GHz

Data Sheet02 | Keysight | N9320B RF Spectrum Analyzer - Data Sheet

The spectrum analyzer

will meet its

specifications when:

It is within its calibration cycle It

has been turned on at least 30

minutes. It has been stored at

an ambient temperature within

the allowed operating range for

at least two hours before being

turned on; if it has been stored

previously at a temperature

range inside the allowed storage

range, but outside the allowed

operating range.“Specifications” describe the performance of parameters covered by the product

warranty and apply to the full temperature range of 5 to 45 °C, unless otherwise noted.

“Typical” values describe additional product performance information that is not covered

by the product warranty. It is performance beyond specifications that 80 percent of the

FLIRT54024°

Imagingandopticaldata

Infraredresolution464×348pixels

UltraMax(super-resolution)InFLIRTools

NETD•<30mK,42°@+30°C(+86°F)

•<40mK,24°@+30°C(+86°F)

•<50mK,14°@+30°C(+86°F)

Fieldofview•42°×32°

•24°×18°

•14°×10°

Minimumfocusdistance•0.15m(0.49ft.),42°

•0.15m(0.49ft.),24°

•1.0m(3.28ft.),14°

•Macromode71µmasoptionto24°

MinimumfocusdistancewithMSX•0.65m(2.13ft.),42°

•0.5m(1.64ft.),24°

•1.0m(3.28ft.),14°

Focallength•10mm(0.39in.),42°

•17mm(0.67in.),24°

•29mm(1.41in.),14°

Spatialresolution(IFOV)•1.66mrad/pixel,42°

•0.90mrad/pixel,24°

•0.52mrad/pixel,14°

Availableextralenses•42°

•14°

LensidentificationAutomatic

fnumber•1.1,42°

•1.3,24°

•1.5,14°

Imagefrequency30Hz

Focus•ContinuousLDM

•One-shotLDM

•One-shotcontrast

•ManualP/N:79302-0201

Copyright

©2017,FLIRSystems,Inc.

sandmarks

appearinghereinareeitherregisteredtrademarks

Power Range 22Parker FL20 SeriesServo drive · motor

WARNING — USER RESPONSIBILITYFAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.• This document and other information from Parker-Hannifi n Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.• The user, through its own analysis and testing, is solely responsible for making the fi nal selection of the system and components and assuring that all performance, endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.• To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifi cations provided by the user, the user is responsible for determining that such data and specifi cations are suitable and suffi cient for all applications and reasonably foreseeable uses of the components or systems.3Parker FL20 SeriesServo drive · motor

IntroductionFrSky 2.4GHz ACCST RXSR-FC Manual

OverviewThank you for purchasing FrSky RXSR-FC telemetry receiver. It has an extremely lightweight weight and mini

appearance. In order to fully enjoy the benefits of this system, please read the instruction manual carefully and set

up the device as described below.

GND

+5V

S.PortGND+5V

ANT2Inverted S.PortBIND

LED-GREENLED-RED

ANT1

• Dimension: 12.4*12.8*3mm (L x W x H)

• Weight: 1g

• Number of Channels: 16Ch

• Operating Voltage Range: DC 4V~6V

• Operating Current: 100mA@5V

• Operating Range: Full range

• Firmware Upgradable

• Compatibility: FrSky X-series module & radios in D16 modeSpecifications

• F.Port enabled and supported telemetry data transmission

• Inverted S.Port enabledFeatures

Binding Procedure

Binding is the process of uniquely associating receiver to a transmitter/transmitter RF module. A transmitter