17寸屏规格书

（膜对膜超薄触摸屏）标准触摸屏尺⼨表（3.5-52⼨）标准触摸屏尺⼨表(3.5-52⼨)屏尺⼨外形尺⼨可视尺⼨操作尺⼨引出线间距引出线长度屏⽐出线位:3.5⼨76.5*63.4 71.4*55.3 71*54.9 1.0 63 4:3 上左3.5⼨87.8*53 78.2*44.3 77.8*43.9 1.0 63 16:9 上左3.5⼨81.3*54.8 75.1*47.6 75.1*47.6 1.0 63 16:9 上中3.7⼨82.51*63.27 78.03*57.17 78.03*57.17 1.0 63 4:3 上左3.8⼨83.5*67 79.4*59.479.4*59.4 1.0 63 4:3 上中3.8⼨83.1*66.4 74.1*55.7 72.1*53.7 1.0 63 4:3 上中3.85⼨91.3*72 81*60 79*58 1.0 63 4:3 上左4.3⼨105*64 97.8*56.7 97.8*56.7 1.0 63 16:9 上中4.3⼨105.5*67.2 96.2*56.1 96.2*56.1 1.0 63 16:9 上左4.4⼨102.8*64.2 94.1*60.2 94.1*60.2 1.0 63 16:9 右下4.5⼨104.7*65.9 98.7*57.5 95.44*54.26 1.0 63 4:3 上中4.7⼨111*93.3 103.4*84.5 103.4*84.5 1.0 63 4:3 上中4.8⼨131*78 114*64 108*58 2.54 63 16:9 上右5.0⼨119.2*90.8 108.1*79.9 108.1*79.9 1.0 63 4:3 上右5.7⼨132.5*104.8 124.6*95.9 116*88.3 1.0 63 4:3 右中5.8⼨144.5*88.7 127．9*72.9 127．9*72.9 1.0 63 16:9 上左5.8⼨138*108 118*89 116*87 2.54 63 4:3 上右5.8⼨135.5*103 122*92 119*89 2.54 63 4:3 上中5.88⼨140*104 122.1*93.3 119.2*90.3 2.54 63 4:3 右中6.3⼨149.7*89.4 142.6*81.3 142.2*80.96 1.0 63 16:9 上中6.5⼨157*90 141.1*78.1 140.7*77.7 1.0 63 16:9 上右6.5⼨155*89.2 145.4*80.93 142.4*77.93 1.0 63 16:9 上中7.0⼨165.5*99.8 158.9*89.7 158.5*89.3 1.0 63 16:9 上左7.0⼨164.5*103 160*94.5 158*92.5 2.54 63 16:9 上左7.0⼨155*105 146*93 144*91 1.2 83 16:10 上左7.0⼨165*100 155.6*87.6 155.2*87.2 1.0 63 16:9 上中7.0⼨165*104 155*94 155*94 1.0 63 16:10 上左7.0⼨164.8*99.8 153*86 152.4*84.4 1.0 63 16:9 下中7.0⼨165*100 155.6*87.6 155.2*87.2 1.0 63 16:9 上中7.0⼨164.8*103.8 153.5*93 151.5*91 1.0 63 16:10 右下7.0⼨164*103 155*94 155*94 1.0 63 16:10 下中(左)7.4⼨171.9*127.4 148.9*112.4 145.9*109.4 2.54 63 4:3 右下8.0⼨183*141 167*126 165*127 2.54 63 4:3 右下8.0⼨192.8*116.9 180.1*103.4 176.64*99.36 2.54 63 16:9 下右8.4⼨208*152 182*139 180*137 2.54 63 4:3 右下8.4⼨183.4*139.5 181.7*174.4 181.7*174.4 2.54 63 4:3 右下8.4⼨185*149.3 174.5*132 169*126 2.54 63 4:3 下中8.48⼨188.9*141.7 174*131.5 172*129.5 2.54 63 4:3 左中8.9⼨207*126 201.5*120 201.5*120 1.0 63 16:10 上左8.9⼨207*126 197*116 195*114 1.0 63 16:9 上左(配奇美屏)9.4⼨225.5*170.5 202.3*154.6 202.3*154.6 2.54 63 4:3 上左10⼨233*144 222.1*131.1 221.5*130.5 1.0 63 16:10 上右10⼨225.6*170.6 206.5*156.5 204*155 2.54 63 4:3 上右10.1⼨235*145.8 220.4*129.1 220.4*129.1 1.0 63 16:9 左上10.1⼨234*142 226.5*129 224.5*127 1.0 63 16:9 左上10.2⼨235*145.8 225.4*135.9 222*132.48 1.0 63 16:10 上左10.2⼨235*145.8 225.4*135.9 222*132.48 2.54 63 16:10 上左10.2⼨235*145.8 225.4*135.9 222*132.48 1.0 63 16:10 上左10.2⼨235*145.8 222.6*133.6 220.6*131.5 1.0 63 16:10 上左10.2⼨235*145.8 224*135.5 222*132.5 1.0 63 16:10 下右10.4⼨223*171211.4*159.4 211*159 2.54 63 4:3 右下10.4⼨234*178 216*163.4 216*163.4 2.54 63 4:3 右中10.5⼨236.5*180 216*164212*160 2.54 63 4:3 右中10.7⼨228.2*175.2 216.7*165.2 216.7*165.2 2.54 63 4:3 右中11⼨258.8*155 246*140 244*138 2.54 63 16:9 下右12.1⼨271*206 254*192 248*186 2.54 63 4:3 左中12.1⼨276.4*179.6 263.52*165.6 263.52*165.6 2.54 63 16:10 右中12.1⼨275.8*178 263.8*165.8 261.1*163.2 2.54 63 16:10 右中12.1⼨265*200 250*185 244.5*183.5 2.54 63 4:3 左上12.1⼨260*192 250*185 244.5*183.5 2.54 63 4:3 左上12.3⼨301.5*174.5 277.8*149 277.8*149 2.54 63 16:9 上左13⼨285*215 274*204 270*200 2.54 63 4:3 右上13.3⼨299*195 288.88*181.6 286.48*179.2 2.54 63 16:10 上右13.3⼨292*216 274.3*206 272.3*204 2.54 63 4：3 右中14.3⼨298*227 289*218 285*214 2.54 63 4:3 右中15.1⼨322*247 310*235 308*233 2.54 63 4:3 右中15.4⼨343.6*221.6 333.2*209.6 331.2*207.6 2.54 63 16:10 上右15.6⼨359.3*209.5 348.43*197.1 344.2*193.5 2.54 63 16:9 下右17.1⼨355*288 341.5*275 333.5*267 2.54 63 4:3 上右17⼨360*278 340*260 340*260 2.54 63 4:3 右中(CRT专⽤) 17⼨355*293 339*271 335*267 2.54 63 4:3 左上17.1⼨389*255 371*233 369.4*231.4 2.54 63 16:10 上右17.1⼨355*288 341.5*275 333.5*267 2.54 63 4:3 右下17.3⼨398*233 382*214 379*211 2.54 63 16:9 下中18.5⼨420*248 410*233 407*229 2.54 63 16:9 下右19⼨396*323 377*304 375*300 2.54 63 4:3 右中19⼨426.4*266.5 410.4*256.5 406.4*252.5 2.54 63 16:9 右中19⼨428*278 417*263 407.4*254.1 2.54 63 16:10 下右19⼨420*273 411*260 407.4*254.1 2.54 63 16:10 下右21.1⼨430*322 413*311 408*306 2.54 63 4:3 右中21⼨501*297 481.5*272.5 477.4*268.4 2.54 63 16:9 右中21.3⼨448*340 432*323 432*323 2.54 63 4：3 右中21.5⼨495*292 479.8*271.3 476*268 2.54 63 16：9 右中22⼨493.7*320 473.7*296 470×293 2.54 63 16:10 右中23.6⼨542*318 525.5*297 521*293 2.54 63 16：9 右中24⼨546*352 522*328 516*322 2.54 63 16:10 右中26⼨596*354 580.8*328 576*324 2.54 63 16:9 下中32⼨719.6*414.3 703.6*398.3 697.6*392.2 2.54 63 16:9 下中（右）37⼨843.8*485.4 827.8*469.4 819.6*460.8 2.54 63 16:9下右42⼨956*548 938*531 930*523 2.54 63 16:9 下右46⼨1043.5*597.4 1027.5*581.4 1019.5*573.4 2.54 63 16:9 下右52⼨1177*673 1161*657 1152*648 2.54 63 16:9 下右注:以上触摸屏有两种结构:1.胶⽚对胶⽚(膜对膜,F/F),超薄、打不碎触摸屏,总厚度为:0.5MM2.胶⽚对玻璃(F/G)总厚度为:1.4MM及2.3MM。

PROLITE T1721MSC-B1 TOUCH TECHNOLOGY - CAPACITIVEThis technology uses a sensor-grid of micro-fine wiresintegrated into the glass that covers the screen. Touch isdetected because electrical characteristics of the sensor gridchange when human finger is placed on the glass. Thanks tothe glass overlay this technology is highly durable, and thetouch function remains unaffected even if the glass isscratched. It offers perfect picture performance and will workwith human finger (also latex gloved) and magnetic ball.SCRATCH RESISTANCEScratch resistance is essential for touch solutions used inpublic places and schools. This is achieved thanks to a glassoverlay covering the screen. It guarantees high durability ofthe touch function and even more importantly the touchfunction remains unaffected even if the glass is scratched.17" touchscreen featuring 10 touch points and PCAP technologyThe ProLite T1721MSC-B1 17” touchscreen is based on projected capacitive technology, offering optimal seamless and accurate touch response. Due to its glass overlay, it guarantees high durability, scratch-resistance and perfect picture performance. A solid and steady base supports the touchscreen with an adjustable stand offering up to 80 degree tilt angles. Menu buttons are located on the back of the screen which can be locked to prevent tampering and include a handy function to deactivate the touchscreen for cleaning. The ProLite T1721MSC-B1 is an incredibly powerful touch solution, perfect for instore retail purposes.1.DISPLAY CHARACTERISTICSDIAGONAL17"; 43cmASPECT RATIO 5 : 4PANEL TN LEDNATIVE RESOLUTION1280 x 1024 ( 1.3 megapixel)BRIGHTNESS250 cd/m² typicalBRIGHTNESS215 cd/m² with touch panelSTATIC CONTRAST1000 : 1 typicalRESPONSE TIME 5 msVIEWING ZONE horizontal/vertical: 170°/ 160°; right/left: 85°/85°; up/down: 80°/80°DISPLAY COLOUR16.7 millionBLUE LIGHT REDUCER yesTOUCHTECHNOLOGY projective capacitive, multi touch (10 compatible touch points - HID, only with supported OS), activated by fingerTOUCH POINTS10GLASS THICKNESS 1.5 mmGLASS HARDNESS7H minimumLIGHT TRANSMITTANCE85%DISPLAY AREA H X W270.5 x 338 mm; 9" x 12"PIXEL PITCH H X V0.264 x 0.264 mm HORIZONTAL SYNC31.4 - 80 KHzVERTICAL SYNC56 - 75 Hz SYNCHRONIZATION Separate Sync2.INTERFACES / CONNECTORS / CONTROLLERS ANALOG INPUT CONNECTOR VGADIGITAL INPUT CONNECTOR DVICONTROLS USB (touch)3.FEATURESPLUG & PLAY VESA DDC2B™CONTROLS On-Screen-Display in 8 languages (DE, EN, ES, FR, IT, NL, PL, RU) and 5 back controls (Menu, Up/Left/ Auto adjustment button, Down/Right button, Return/Exit button, Power)USER CONTROLS picture (backlight, brightness, contrast, sharpness) display (auto adjustment, H position, V position, pixel clock, phase) colour (colour temp, picture mode) input, audio (volume, mute) other (reset, OSD time, OSD H position, OSD V position, language) informationSPEAKERS 2 x 2 W (Stereo) REGULATIONS CE, CB, TÜV-Bauart, CU, cULus TILT ANGLE70° up; 10° downVESA MOUNTING100 x 100 mmCOLOUR Black4.ACCESORIESDRIVER multi-touch: Windows7/8/10 (HID compliant), single-touch: Windows XP, Vista, LinuxINCLUDED ACCESSORIES AC adapter, power cable, VGA signal cable, DVI signal cable, USB cable, audio cable, stand, mylar sheet (for VESA mount), quick start guide, safety guide5.POWER MANAGEMENTPOWER SUPPLY AC 100 - 240 V, 50/60 HzPOWER SUPPLY UNIT externalPOWER USAGE20 W typical; max. 3 W in Power management modePOWER MANAGEMENT VESA DPMS6.DIMENSIONS / WEIGHTDIMENSIONS W X H X D392.5 x 364 x 198 mmWEIGHT 4.4 kgAll trademarks and registered trademarks acknowledged. E & O E. Specification subject to change without notice. All LCD's comply with ISO-9241-307:2008 in connection with pixel defects.© IIYAMA CORPORATION ( ). ALL RIGHTS RESERVED.ProLite T1732MSC The ProLite T1732MSC17"multi-touch screen is based on projected capacitive technology which thanks to a glass overlay covering the screen guarantees high durability,scratch-resistance and perfect picture performance.The touch function remains unaffected even if the glass is scratched.A solid and steady base supports the TouchScreen with an adjustable stand offering full90degree positioning angles.Menu Buttons are located on the side of the screen which can be locked to prevent tampering and includes a handy function to deactivate the TouchScreen for cleaning.In addition the edge-to-edge glass design creates an eye-catching finish with high light transmission guaranteeing perfect picture clarity and brilliant colours.Analogue and DVI inputs are available for flexible connectivity along with USB for the Touch Interface.The multi-touch function is supported only under Windows® 7 and 8.DISPLAY CHARACTERISTICSDiagonal 17"Touchtechnology projective capacitive, multitouch (2compatible touch points - supported onlyunder Windows® 7/8), activated by fingerPanel TNGlass hardness 7H minimumDisplay area h x w 270.5 x 338 mm; 10.6" x 13.3"Response time 5 msStatic contrast 1 000 : 1 with touch panelBrightness 225 cd/m² with touch panelViewing zone horizontal/vertical: 160°/ 160°; right/left:80°/ 80°; up/down: 80°/ 80°Display colour 16.7 millionPixel pitch h x v 0.264 x 0.264 mmNative resolution 1280 x 1024 ( 1.3 megapixel)Horizontal sync 31,4 - 80 KHzVertical sync 56 - 75 HzSynchronization Separate SyncAspect ratio 5 : 4Light transmittance 90%POWER MANAGEMENTPower supply AC 100 - 240 V, 50 / 60 HzPower Supply Unit internalPower usage 25 W typical; max. 2 W in Powermanagement modePower management VESA DPMSDIMENSIONS / WEIGHTDimensions w x h x d 387 x 342 x 202 mmWeight 5.6 kg INTERFACES / CONNECTORS / CONTROLLERSAnalog input connector VGA (D-Sub)Digital input connector DVI-DInputs USB (for touch connectivity)SPECIAL FEATURESControls On-Screen-Display in 8 languages (DE, EN,ES, FR, IT, JP, Chinese - traditional andsimplified) and 5 front controls (Menu, Scrollup/ Brightness, Scroll down/ Mute, Select/Auto, Power)User controls contrast, brightness, auto adjust, H.position,V.position, H.size, phase, OSD H.position,OSD V.position, OSD timeout, reset, inputselect, OSD language, colour temperature,volume, muteSpeakers 2 x 1 W (Stereo)Anti-theft-device Kensington-lock™ preparedSafety CE, TÜV/Bauart, VCCI, CB, CU, IP54Tilt angle 90° up; 5° downVESA mounting 100 x 100 mmColour Black, WhiteACCESORIESDriver multi-touch: Windows7/8 (HID compliant),single-touch: Vista, XP, 9X, 2000, CE, NT4),Linux, Mac (OSX)Included accessories power cable, VGA (D-Sub) signal cable,DVI-D signal cable, audio cable, USB cable,Touch Panel Driver Disk (CD-ROM), screw,quick start guide, safety guideAll trademarks and registered trademarks acknowledged. E & O E. Specification subject to change without notice. All LCD's comply with ISO-9241-307:2008 in connection with pixel defects.17" Projective Capacitive 10pt touch screen with AG-coatingThe ProLite T1732MSC-W5AG 17" multi-touch screen is based on projected capacitive technology which thanks to a glass overlay covering the screen guarantees high durability, scratch-resistance and perfect picture performance. The Anti Glare coating helps to avoid issues with reflections and external light sources affecting colour reproduction, contrast and sharpness. The touch function remains unaffected even if the glass is scratched. A solid and steady base supports the TouchScreen with an adjustable stand offering full 90 degree positioning angles. Menu Buttons are located on the side of the screen which can be locked to prevent tampering and includes a handy function to deactivate the TouchScreen for cleaning. In addition the edge-to-edge glass design creates an eye-catching finish with high light transmission guaranteeing perfect picture clarity and brilliant colours. Available in black and white.PROLITE T1732MSC-W5AGTouch technology - CapacitiveThis technology uses a sensor-grid of micro-fine wires integrated into the glass that covers the screen. Touch is detected because electrical characteristics of the sensor grid change when human finger is placed on the glass. Thanks to the glass overlay this technology is highly durable, and the touch function remains unaffected even if the glass is scratched. It offers perfect picture performance and will work with humanfinger (also latex gloved) and stylus-pen.AG CoatingThe Anti Glare coating is used in professional-grade displays to help avoid issues with reflections and external light sources affecting colour reproduction,contrast and sharpness. It also makes the screen lesssusceptible to dust, grease and dirt marks.Design Edge to edge Diagonal 17", 43cmPanelTN LED, AG coated glass Native resolution 1280 x 1024 (1.3 megapixel)Aspect ratio 5:4Brightness 250 cd/m² typical Brightness 215 cd/m² with touch Static contrast 1000:1 with touch Light transmittance 85%Response time 5msViewing zone horizontal/vertical: 170°/160°, right/left: 85°/85°, up/down: 80°/80°Colour support 16.7mln (6bit + A-FRC)Horizontal Sync 31 - 80KHz Vertical Sync 50 - 75HzViewable area W x H 338 x 270.5mm, 13.3 x 10.6"Pixel pitch0.264mm Bezel colour and finishwhite, matteTouch technology projective capacitiveTouch points 10 (HID, only with supported OS)Touch method stylus, finger, glove (latex)Touch interfaceUSBSupported operating systemsAll iiyama monitors are Plug & Play and compatible with Windows and Linux. For details regarding the supported OS for the touch models, please refer to the driver instruction file available in the downloads section.Analog signal input VGA (x1)Digital signal input HDMI (x1), DisplayPort (x1)Audio output Speakers (2 x 1W)HDCPyesImpact testing IP54 (front)OSD key lockyesOSD languages EN, DE, FR, ES, IT, CN, JPControl buttons Menu, Scroll up/ Brightness, Scroll down/ Mute, Select/ Auto, PowerUser controlscontrast, brightness, auto adjust, H.position, V.position, H.size, fine, OSDH.position, OSD V.position, OSD timeout, reset, input select, OSD language, colour temperature, volume, mute ConvenienceKensington-lock™ preparedDISPLAY CHARACTERISTICS01TOUCH02INTERFACES / CONNECTORS / CONTROLS03FEATURES04GENERAL05Plug&Play DDC2BTilt angle 90° up; 5° down VESA mounting100 x 100mm Cable management systemyesGuides quick start guide, safety guide Other Touch Panel Driver Disk (CD-ROM)Cable coveryesPower supply unit internalPower supply AC 100 - 240V, 50/60Hz Power usage20W typical, 2W stand byRegulationsCB, CE, TÜV-Bauart, CU, cULus, VCCIProduct dimensions W x H x D 387 x 342 x 202mm Weight (without box)5.6kgMECHANICAL06ACCESSORIES INCLUDED07POWER MANAGEMENT08SUSTAINABILITY09DIMENSIONS / WEIGHT10。

图南光电　ｈｔｔｐ：／／ｗｗｗ．ｔｎｄｉｓｐｌａｙ．ｃｏｍ．ｃｎProduct SpecificationAU OPTRONICS CORPORATIONM170ETN01.1(V ) Preliminary Specification ( ) Final Specification Module Model Name 17” Color TFT-LCD M170ETN01.1CustomerDateApproved byDateChi Yin WuFeb 6, 2013Approved byPrepared byDateJia Hau JeanFeb 6, 2013Note: This Specification is subject to change without notice.AU Optronics corporationdocument version 0.01图南光电　ｈｔｔｐ：／／ｗｗｗ．ｔｎｄｉｓｐｌａｙ．ｃｏｍ．ｃｎProduct SpecificationAU OPTRONICS CORPORATIONM170ETN01.1Contents 1 Handling Precautions................................................................4 2 General Description ..................................................................52.1 Display Characteristics....................................................................................................... 5 2.2 Absolute Maximum Rating of Environment ........................................................................ 6 2.3 Optical Characteristics ....................................................................................................... 73 TFT-LCD Module ......................................................................113.1 Block Diagram.................................................................................................................. 11 3.2 Interface Connection........................................................................................................ 12 3.2.1 Connector Type....................................................................................................... 12 3.2.2 Connector Pin Assignment...................................................................................... 12 3.3 Electrical Characteristics.................................................................................................. 14 3.3.1 Absolute Maximum Rating ...................................................................................... 14 3.3.2 Recommended Operating Condition....................................................................... 14 3.4 Signal Characteristics ...................................................................................................... 15 3.4.1 LCD Pixel Format.................................................................................................... 15 3.4.2 LVDS Data Format .................................................................................................. 15 3.4.3 Color versus Input Data .......................................................................................... 16 3.4.4 LVDS Specification.................................................................................................. 17 3.4.5 Input Timing Specification ....................................................................................... 19 3.4.6 Input Timing Diagram .............................................................................................. 20 3.5 Power ON/OFF Sequence ............................................................................................... 214 Backlight Unit .........................................................................224.1 Block Diagram.................................................................................................................. 22 4.2 Interface Connection........................................................................................................ 23 4.2.1 Connector Type....................................................................................................... 23 4.2.2 Connector Pin Assignment...................................................................................... 25 4.3 Electrical Characteristics.................................................................................................. 26 4.3.1 Absolute Maximum Rating ...................................................................................... 26 4.3.2 Recommended Operating Condition....................................................................... 265 6 7 8Reliability Test ........................................................................28 Shipping Label ........................................................................29 Mechanical Characteristics .....................................................30 Packing Specification..............................................................318.1 Packing Flow.................................................................................................................... 31 8.2 Pallet and shipment information....................................................................................... 32document version 0.02图南光电　ｈｔｔｐ：／／ｗｗｗ．ｔｎｄｉｓｐｌａｙ．ｃｏｍ．ｃｎProduct SpecificationAU OPTRONICS CORPORATIONM170ETN01.1Record of RevisionVersion Date Page Old description New Description Remark0.02013/2/6AllFirst version release-document version 0.03Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.11 Handling Precautions 1) 2) 3) 4) 5) 6) 7) 8) 9) Since front polarizer is easily damaged, pay attention not to scratch it. Be sure to turn off power supply when inserting or disconnecting from input connector. Wipe off water drop immediately. Long contact with water may cause discoloration or spots. When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. Do not open or modify the Module Assembly. Do not press the reflector sheet at the back of the module to any directions. In case a TFT-LCD Module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the LED lightbar edge. Otherwise the TFT-LCD Module may be damaged. Insert or pull out the interface connector, be sure not to rotate nor tilt it of the TFT-LCD Module. Do not twist nor bend the TFT -LCD Module even momentary. It should be taken into consideration that no bending/twisting forces are applied to the TFT-LCD Module from outside. Otherwise the TFT-LCD Module may be damaged. Please avoid touching COF position while you are doing mechanical design. When storing modules as spares for a long time, the following precaution is necessary: Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5℃ and 35℃ at normal humidity.10) 11)12) 13)document version 0.04Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.12 General Description This specification applies to the 17 inch wide Color a-Si TFT-LCD Module M170ETN01.1. The display supports the SXGA+ (1280(H) x 1024(V)) screen format and 16.7M colors (RGB 6-bits + Hi-FRC data). The input interface is Dual channel LVDS and this module doesn’t contain an driver board for backlight.2.1 Display Characteristics The following items are characteristics summary on the table under 25℃ condition:ITEMS Screen Diagonal Active Area Pixels H x V Pixel Pitch Pixel Arrangement Display Mode White Luminance ( Center ) Contrast Ratio Response Time Power Consumption (LCD Module + Backligh unit) Weight Outline Dimension Electrical Interface Support Color Surface Treatment Temperature Range Operating Storage (Shipping) RoHS Compliance TCO Compliance Unit [mm] [mm] [mm] [cd/m2] [msec] [Watt] SPECIFICATIONS 432 (17.0”) 337.920(H) × 270.336(V) 1280 × 3(RGB) × 1024 0.264(per one triad) × 0.264 R.G.B. Vertical Stripe Normally White 250 (Typ.) 1000 : 1 (Typ.) 5 (Typ., on/off) 9.91 (Typ.) LCD module : PDD (Typ.)=3 @ Black pattern,Fv=60Hz Backlight unit : PBLU (Typ.) =6.91 @Is=60mA 1273 (Typ.) 358.5(H) x 296.5(V) x 10.3(D) (Typ.) Dual Channel LVDS 16.7M colors (RGB 6-bits +Hi-FRC data) Anti-glare type, Hardness 3H 0 to +50 -20 to +60 RoHS Compliance TCO6.0 Compliance[Grams] [mm] [oC] [oC] -document version 0.05Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.12.2 Absolute Maximum Rating of Environment Permanent damage may occur if exceeding the following maximum rating. Symbol TOP TGS HOP TST HST Description Operating Temperature Glass surface temperature (operation) Operation Humidity Storage Temperature Storage Humidity Min. 0 0 5 -20 5 Max. +50 +65 90 +60 90 Unit [ C] [ C] [%RH] [oC] [%RH]o oRemark Note 2-1 Note 2-1Function judged onlyNote 2-1Note 2-1: Temperature and relative humidity range are shown as the below figure. 1. 90% RH Max ( Ta ≦39℃) 2. Max wet-bulb temperature at 39℃ or less. ( Ta ≦39℃) 3. No condensationOperating RangeStorage Rangedocument version 0.06Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.12.3 Optical Characteristics The optical characteristics are measured on the following test condition. Test Condition: 1. Equipment setup: Please refer to Note 2-2. 2. Panel Lighting time: 30 minutes 3. VDD=5.0V, Fv=60Hz,Is=60mA,Ta=25℃Symbol Description White Luminance (Center of screen) Min. 200 75 600 75 75 70 70 75 75 70 70 TBD TBD TBD TBD TBD TBD Typ. 250 80 1000 85 85 80 80 88 88 85 85 3.8 1.2 5 TBD TBD TBD TBD TBD TBD Max. 5.5 2.5 8 TBD TBD TBD TBD TBD TBD By SR-3 [msec] Note 2-6 By TRD-100 [degree] Note 2-5 By SR-3 Unit[cd/m2]Remark Note 2-2 By SR-3 Note 2-3 By SR-3Lw Luni CR θR θL ΦH ΦL θR θL ΦH ΦL TR TF Rx Ry Gx Gy Bx By Wx Wy CT FdBLuminance Uniformity (9 points) Contrast Ratio (Center of screen) Horizontal Viewing Angle (CR=10) Vertical Viewing Angle (CR=10) Horizontal Viewing Angle (CR=5) Vertical Viewing Angle (CR=5) Right Left Up Down Right Left Up Down Rising Time Response Time Falling Time Rising + Falling Red x Red y Green x Color Coordinates (CIE 1931) Green y Blue x Blue y White x White y Crosstalk Flicker (Center of screen)[%]-Note 2-4 By SR-30.283 0.313 0.343 0.299 0.329 0.359 1.5 -20 [%] [dB] Note 2-7 By SR-3 Note 2-8 By SR-3document version 0.07Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.1Note 2-2: Equipment setup :Photo detector (SR-3, TRD-100)Measured distance (50cm)LCD PanelTFT-LCD ModuleCenter of the screen Note 2-3: Luminance Uniformity Measurement Definition:Luminance Uniformity =Minimum Luminance of 9 Points (P1 ~ P9) Maximum Luminance of 9 Points (P1 ~ P9)a.Test pattern: White Patterndocument version 0.08Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.1Note 2-4: Contrast Ratio Measurement Definition:Contrast Ratio =Luminance of White pattern Luminance of Black patterna. Measured position: Center of screen (P5) & perpendicular to the screen (θ=Φ=0°) Note 2-5: Viewing angle measurement Definition: The angle at which the contrast ratio is greater than 10 & 5 . a. Horizontal view angle: Divide to left & right (θL & θR) Vertical view angle: Divide to up & down (ΦH &ΦL)Note 2-6: Response time measurement The output signals of photo detector are measured when the input signals are changed from “Black” to “White” (rising time, TR), and from “White” to “Black” (falling time, TF), respectively. The response time is interval between the 10% and 90% of optical response. (Black & White color definition: Please refer section 3.4.3)%TFTR100 90 Optical response 10 0 1 Frame 1 Frame White Black B lack W hitedocument version 0.09Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.1Note 2-7: Crosstalk measurement Definition: CT = Max. (CTH,CTV); Where a.Maximum Horizontal Crosstalk : CTH = Max. (| YBL – YAL | / YAL × 100 %, | YBR – YAR | / YAR × 100 %); Maximum Vertical Crosstalk: CTV = Max. (| YBU – YAU | / YAU × 100 %, | YBD – YAD | / YAD × 100 %); b. YAU, YAD, YAL, YAR = Luminance of measured location without Black pattern YBU, YBD, YBL, YBR = Luminance of measured location with Black patternNote 2-8: Flicker measurement a. Test pattern: It is listed as following. Gray level = L0Gray level = L127R: Red, G: Green, B:Blue b. Measured position: Center of screen (P5) & perpendicular to the screen (θ=Φ=0°)document version 0.010Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.13 TFT-LCD Module 3.1 Block Diagram The following shows the block diagram of the 17 inch Color TFT-LCD Module.ConnectorLVDS Signal Signal VDDDC/DCConverterGamma Correction G1 D1 X-Driver IC D3840AUO ASICTiming Controller Mini LVDS TransmitterTFT-LCD1280(x3) x 1024 Pixels G1024LVDSReceiverASIC Control Boarddocument version 0.011Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.13.2 Interface Connection 3.2.1 Connector Type Manufacturer Part Number Mating Connector Manufacturer Part Number P-TWOAL230F-A0G1D-PTFT-LCD ConnectorSTMMSCKT2407P30HBJAEFI-XB30SSRLAHF16JAE FI-X30HL (Locked Type)3.2.2 Connector Pin Assignment PIN # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Symbol RxO0RxO0+ RxO1RxO1+ RxO2RxO2+ GND RxOCLKRxOCLK+ RxO3RxO3+ RxE0RxE0+ GND RxE1RxE1+ GND RxE2RxE2+ RxECLKRxECLK+ RxE3RxE3+ GND NC NC Description Negative LVDS differential data input (Odd data) Positive LVDS differential data input (Odd data) Negative LVDS differential data input (Odd data) Positive LVDS differential data input (Odd data) Negative LVDS differential data input (Odd data) Positive LVDS differential data input (Odd data) Ground Negative LVDS differential clock input (Odd clock) Positive LVDS differential clock input (Odd clock) Negative LVDS differential data input (Odd data) Positive LVDS differential data input (Odd data) Negative LVDS differential data input (Even data) Positive LVDS differential data input (Even data) Ground Negative LVDS differential data input (Even data) Positive LVDS differential data input (Even data) Ground Negative LVDS differential data input (Even data) Positive LVDS differential data input (Even data) Negative LVDS differential clock input (Even clock) Positive LVDS differential clock input (Even clock) Negative LVDS differential data input (Even data) Positive LVDS differential data input (Even data) Ground No connection (for AUO test only. Do not connect) No connection (for AUO test only. Do not connect)12Remarkdocument version 0.0Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.127 28 29 30NC VDD VDD VDDNo connection (for AUO test only. Do not connect) Power Supply Input Voltage Power Supply Input Voltage Power Supply Input Voltagedocument version 0.013Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.13.3 Electrical Characteristics 3.3.1 Absolute Maximum Rating Permanent damage may occur if exceeding the following maximum rating. Symbol VDD Description Power Supply Input Voltage Min GND-0.3 Max 6.0 Unit [Volt] Remark Ta=25℃3.3.2 Recommended Operating Condition Symbol VDD IDD PDD IRush VDDrp Description Power supply Input voltagePower supply Input Current (RMS)Min 4.5 -Typ 5.0 0.6 0.72 3 3.6Max 5.5 0.72 0.87 3.6 4.32 3.0 500Unit [Volt] [A] [A]RemarkVDD= 5.0V, Black Pattern, Fv=60Hz VDD= 5.0V, Black Pattern, Fv=75HzVDD Power Consumption Inrush Current Allowable VDD Ripple Voltage[Watt] VDD= 5.0V, Black Pattern, Fv=60Hz [Watt] VDD= 5.0V, Black Pattern, Fv=75Hz [A] Note 3-1--[mV] VDD= 5.0V, Black Pattern, Fv=75HzNote 3-1: Inrush Current measurement: Test circuit:The duration of VDD rising time: 470us.document version 0.0 14Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.13.4 Signal Characteristics 3.4.1 LCD Pixel Format1 1st Line 2 1279 1280 R G B R G BR G B R GB1024th Line R G B R G BR G B R G B3.4.2 LVDS Data FormatNote 3-2: a. O = “Odd Pixel Data” E = “Even Pixel Data” nd b. Refer to 3.4.1 LCD pixel format, the 1st data is 1 (Odd Pixel Data), the 2 data is 2 (Even Pixel Data) and the last data is 1280 (Even Pixel Data).document version 0.015Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.13.4.3 Color versus Input Data The following table is for color versus input data (8bit). The higher the gray level, the brighter the color.document version 0.016Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.13.4.4 LVDS Specification a. DC Characteristics: Symbol VTH VTL │VID│ VCM Description LVDS Differential Input High Threshold LVDS Differential Input Low Threshold LVDS Differential Input Voltage LVDS Common Mode Voltage Min -100 100 +1.0 Typ +1.2 Max +100 600 +1.5 Units [mV] [mV] [mV] [V] VTH-VTL = 200mV Condition VCM = 1.2V VCM = 1.2VLVDS Signal Waveform: Use RxOCLK- & RxOCLK+ as example.RxOCLK-RxOCLK+document version 0.017Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.1b. AC Characteristics: Symbol Description Maximum deviation of input clock frequency during Spread Spectrum FMOD Maximum modulation frequency of input clock during Spread Spectrum 200 KHz Min Max Unit RemarkFDEV-±3%Freq Fmax Fclk * FDEV Fclk Fmin 1 FMOD < Spread Spectrum> TimeFclk: LVDS Clock Frequencydocument version 0.018Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.13.4.5 Input Timing Specification It only support DE mode, and the input timing are shown as the following table. Symbol Tv Tdisp (v) Tblk (v) Fv Th Tdisp (h) Tblk (h) Fh Tclk Fclk LVDS Clock Horizontal Section Vertical Section Description Period Active Blanking Frequency Period Active Blanking Frequency Period Frequency Min. 1036 1024 12 50 730 640 90 37.8 50 51.8 Typ. 1066 1024 42 60 844 640 204 54 60 64 Max. 1873 1024 849 76 1320 640 680 68.4 76 93.7 Unit Th Th Th Hz Tclk Tclk Tclk KHz ns MHz Note 3-3 1/Fclk Note 3-4 RemarkNote 3-3: The equation is listed as following. Please don’t exceed the above recommended value. Fh (Min.) = Fclk (Min.) / Th (Min.); Fh (Typ.) = Fclk (Typ.) / Th (Typ.); Fh (Max.)= Fclk (Max.) / Th (Min.); Note 3-4: The equation is listed as following. Please don’t exceed the above recommended value. Fclk (Min.) = Fv (Min.) x Th (Min.) x Tv (Min.); Fclk (Typ.) = Fv (Typ.) x Th (Typ.) x Tv (Typ.); Fclk (Max.) = Fv (Max.) x Th (Typ.) x Tv (Typ.);document version 0.019Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.13.4.6 Input Timing DiagramTv M pixel Tblk(v) Tdisp(v) Y Th N LineXDEN RGB DataLineInvalid Data1Line2Line3Line4LineNLineInvalid DataCLKTclkThTdisp(h)Tblk(h)DERGB Data Pixel Pixel Pixel Pixel (Odd) M-7 M-5 M-3 M-1Invalid DataPixel Pixel Pixel Pixel Pixel Pixel 1 3 5 7 9 11Pixel Pixel Pixel M-5 M-3 M-1Invalid DataPixel Pixel 1 3RGB Data Pixel Pixel Pixel Pixel (Even) M-6 M-4 M-2 MInvalid DataPixel Pixel Pixel Pixel Pixel Pixel 2 4 6 8 10 12PixelPixel M-4PixelM-2 MInvalid DataPixel Pixel 2 4document version 0.020Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.13.5 Power ON/OFF Sequence VDD power,LVDS signal and backlight on/off sequence are as following. LVDS signals from any system shall be Hi-Z state when VDD is off.Backlight OffT190% 90% 10%VDD10%T2T5T6T7LVDS SignalVALID DATA T3 T4 Backlight On Backlight OffVSLEDBacklight OffPower Sequence TimingSymbol Min.T1 T2 T3 T4 T5 T6 T7 0.5 0 500 100 0 0 1000Value Typ.-Max.10 50 50Unit[ms] [ms] [ms] [ms] [ms] [ms] [ms]RemarkNote 3-5 Note 3-6 Note 3-6-150 -Note 3-5 : Recommend setting T5 = 0ms to avoid electronic noise when VDD is off. Note 3-6 : During T5 and T6 period , please keep the level of input LVDS signals with Hi-Z state.document version 0.021Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.14 Backlight Unit 4.1 Block Diagram The following shows the block diagram of the 17 inch Backlight Unit. And it includes 36 pcs LED in the LED light bar. (4 strings and 9 pcs LED of one string).+ VS -ISISISISConnectorVSLEDCh1Ch2Ch3Ch4document version 0.022Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.14.2 Interface Connection 4.2.1 Connector Type Manufacturer Backlight Connector Part Number Manufacturer Mating Connector Part Number H112K-P06N-13B (Locking type) 3707K-S06N-21R ENTERY ENTERYBacklight Connector dimension:H × V × D = 13.9 × 3.00 × 4.25, Pitch = 1.0(unit = mm )document version 0.023Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.1Mating Connector dimension:document version 0.024Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.14.2.2 Connector Pin Assignment Pin# 1 2 3 4 5 6 Symbol Ch1 Ch2 VSLED VSLED Ch3 Ch4 Description LED Current Feedback Terminal (Channel 1) LED Current Feedback Terminal (Channel 2) LED Power Supply Voltage Input Terminal LED Power Supply Voltage Input Terminal LED Current Feedback Terminal (Channel 3) LED Current Feedback Terminal (Channel 4) RemarkPIN1document version 0.025Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.14.3 Electrical Characteristics 4.3.1 Absolute Maximum RatingPermanent damage may occur if exceeding the following maximum rating. (Ta=25 ) Remark100% duty ratio Duty ratio 10% Pulse time=10 msSymbol IsDescription LED String CurrentMin 0Max 90 150Unit [mA] [mA]℃≦Duty ratio= (A / B) X 100% ;(A: Pulse time, B: Period)4.3.2 Recommended Operating Condition (Ta=25℃)Symbol Description Min. Typ. Max. Unit Remark 100% duty ratio of LED chip Is=60mA @ 100% duty ratio; Note 4-1 Is=60mA @ 100% duty ratio; Note 4-2Is Vs ∆Vs PBLU LTLEDLED String Current LED String Voltage Maximum Vs Voltage Deviation of light bar LED Light Bar Power Consumption LED Life Time25.260 28.8 6.91 -66 32.4 1.8 8.55 -[mA] [Volt] [Volt] [Watt] [Hour]30,000Note 4-3 Note 4-4document version 0.026Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.1Note 4-1: Vs (Typ.) = VF (Typ.) X LED No. (one string); a. VF: LED chip forward voltage, VF (Min.)=2.8V, VF(Typ.)=3.2V, VF(Max.)=3.6V b. The same euqation to calculate Vs(Min.) & Vs (Max.) for respective VF (Min.) & VF(Max.);Note 4-2: ∆Vs (Max.) = ∆VF X LED No. (one string); a. ∆VF: LED chip forward voltage deviation; (0.2 V , each Bin of LED VF) Note 4-3: PBLU (Typ.) = Vs (Typ.) X Is (Typ.) X 4 ; ( 4 is total String No. of LED Light bar) PBLU (Max.) = Vs (Max.) X Is (Max.) X 4 ; Note 4-4: Definition of life time: a. Brightness of LED becomes to 50% of its original value b. Test condition: Is = 60mA and 25℃ (Room Temperature)document version 0.027Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.15 Reliability Test AUO reliability test items are listed as following table. (Bare Panel only) ItemsTemperature Humidity Bias (THB) High Temperature Operation (HTO) Low Temperature Operation (LTO) High Temperature Storage (HTS) Low Temperature Storage (LTS) Vibration Test (Non-operation)ConditionTa= 50℃, 80%RH, 300hours Ta= 50℃, 50%RH, 300hours Ta= 0℃, 300hours Ta= 60℃, 300hours Ta= -20℃, 300hours Acceleration: 1.5 Grms Wave: Random Frequency: 10 - 200 Hz Sweep: 30 Minutes each Axis (X, Y, Z) Acceleration: 50 G Wave: Half-sine Active Time: 20 ms Direction: ±X, ±Y, ±Z (one time for each Axis) Height: 61 cm, package test -20℃/30min, 60℃/30min, 100 cycles On/10sec, Off/10sec, 30,000 cycles Contact Discharge: ± 15KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point.RemarkShock Test (Non-operation) Drop Test Thermal Shock Test (TST) On/Off TestNote 5-1ESD (Electro Static Discharge) Air Discharge: ± 15KV, 150pF(330Ω ) 1sec 8 points, 25 times/ point. Altitude Test Operation:18,000 ft Non-Operation:40,000 ftNote 5-2Note 5-1: a. A cycle of rapid temperature change consists of varying the temperature from -20℃ to 60℃, and back again. Power is not applied during the test. b. After finish temperature cycling, the unit is placed in normal room ambient for at least 4 hours before power on. Note 5-2: EN61000-4-2, ESD class B: Certain performance degradation allowed No data lost Self-recoverable No hardware failures.document version 0.028Product SpecificationAU OPTRONICS CORPORATIONM170ETN01.16 Shipping Label The label is on the panel as shown below:M170ETN01.1Note 6-1: For Pb Free products, AUO will addfor identification. for identification. for identification.Note 6-2: For RoHS compatible products, AUO will addNote 6-3: For China RoHS compatible products, AUO will addNote 6-4: The Green Mark will be presented only when the green documents have been ready by AUO Internal Green Team.document version 0.0297 Mechanical CharacteristicsAvoid touching COF position when doing mechanical designVer 0.08 Packing Specification 8.1 Packing Flow面板依序貼附保護膜裝入靜電袋， 面板依序貼附保護膜裝入靜電袋，P 板朝上依序放入紙箱中， 板朝上依序放入紙箱中，滿箱裝 8pcsCorner angle Stretch filmMoisture-proof filmLabelPET bandCorner anglePalletVer 0.08.2 Pallet and shipment informationSpecification Item Q'ty Panel Cushion Box Packing Box Pallet 1 1 1 8 pcs/Box 1 Dimension 358.5(H)mm × 296.5(V)mm × 10.3(D)mm 434(L)mm x 278(W)mm x 390(H)mm 434(L)mm x 278(W)mm x 390(H)mm 1150(L)mm x 890(W)mm x 132(H)mm 1150(L)mm x 890(W)mm x 131(H)mm Weight(kg) 1.45 0.95 0.90 13.45 12.00 334.8 without Panel & cushion with panel & cushion RemarkPallet after Packing 18 boxes/palletVer 0.0。

17吋 液晶显示器用戶手册用户说明书在操作显示器前请全部阅读此说明书，说明书应保留好，便于供将来参考用。

FCC B 类射频干扰声明经测试，本设备符合 FCC 规则第 15 部分对“B 类”数字设备的限制规定。

这些限制旨在提供合理的保护措施，以防该设备在住宅区安装时产生有害干扰。

本设备产生、使用并辐射射频能量，如果未遵照说明进行安装和使用，可能会对无线电通信产生干扰。

但也不能保证在特定的安装中不会产生干扰的问题。

如果本设备确实对无线电或电视接收造成干扰（可以通过开关设备来确定），建议用户采取以下一种或多种措施排除干扰：重新调整接收天线的方向或位置。

增大本设备与接收器的间距。

将设备电源连接到不同于接收器所连接到的电路的电源插座上。

咨询经销商或有经验的无线电/电视机技术人员以获取帮助。

本设备符合 FCC 规则第 15 部分的规定。

操作应符合以下两个条件：(1) 本设备不会造成有害干扰，并且(2) 本设备一定能够承受接收到的所有干扰，包括可能会造成意外操作的干扰。

加拿大本 B 类数字设备符合 Canadian Interference-Causing Equipment Regulations（加拿大设备引起干扰法规）的所有要求。

本设备符合电磁兼容性方面的 EMC 法令 89/336/EEC 的规定以及低压法令方面的 73/23/EEC 和 93/68/EEC 规定。

电源插座应靠近设备并可以够到。

用户说明书TCO’99（仅可选型号）恭喜！阁下购买了 TCO’99 认证和标示的产品！您选择了一款专为专业使用而设计的产品。

购买本产品可以降低对环境的损害，也有助于推进环保型电子产品的开发。

为什么我们生产环保标志计算机？在许多国家和地区，加贴环保标志已经成为鼓励使用环保型产品和服务的一种有效方法。

由于世界各地制造和使用电子设备在不断地增长，大家都开始关心电子产品所使用材料和物质废弃时的回收处理问题。

如果选择正确的材料和物质，则对环境的影响会最小化。

BenQ FP791LCD 彩色液晶显示器17.0 英吋 (43.2 公分) LCD 面板尺寸使用者手册BenQ LCD 彩色显示器用户指南版权 © 2002 属于明基电通股份有限公司所有。

保留所有权利。

未经 BENQ Corporation 事先书面许可，不得以任何形式或任何方法（电子、机械、磁性、光学、化学、手工或其它方法），复制、传输、抄写或在检索系统中存储本手册的任何部分，或将任何部分翻译成任何语言或计算机语言。

明基公司 (BENQ Corporation) 对本手册提供的内容不作任何明示或暗示的事实陈述或担保，同时明确声明不对任何担保、适销性或针对任何特定用途的适用性负责。

此外，明基公司保留修订本手册或偶尔修改本手册内容的权利，恕不负责就此类修订或修改事宜通知任何人。

1.拔下交流插头即可将本产品与交流电源隔离。

2.清洁之前，请先从墙壁插座拔下本产品的电源线。

使用不掉毛的软布清洁 LCD 监视器表面。

不要使用任何清洁液或玻璃清洁剂。

3.外壳背后或上方的狭缝和开口为散热孔。

切勿覆盖或堵塞。

不应将本产品放置在散热装置或暖气节气门的旁边或上方；也不应以嵌入方式安装本产品，除非采取适当的通风措施。

4.使用本产品时应当采用标签上指示的电源类型。

如果您不清楚可用的电源是什么类型，请向您的经销商或电力公司咨询。

5.不要将任何物体插入到本产品中，也不要让任何液体溅到本产品上。

6.请勿自行尝试修理本产品！打开外壳可能会造成高压电击或带来其它危险。

如果发生上述任何一种误用情况或其它意外情况（掉落、操作错误），请联系有资格的维修人员。

7.电源线可用作可插入设备的断电装置。

插座应当在设备附近，并且应当便于插拔插头。

免责声明安全事项版权所有打开包装 (3)目录显示器的前后视图 (4)前视图 (4)后视图 (1) (4)后视图 (2)：插头和插座位置 (5)安装 (6)硬件安装 (6)软件安装 (8)调整显示器 (37)控制面板 (37)热键模式 (38)键，OSD Lock（OSD 锁）热键 (38)键，Input Priority（输入优先权）热键 (38)主菜单模式 (39)疑难排解 (49)常见问题 (FAQ) (49)若仍有问题？ (50)支持的操作模式 (51)规格 (52)打开包装请检查包装中是否包含以下项目。

目录前言 (2)手册说明 2重要操作说明 3开始使用 (4)快速安装 4开包 5安装底座 6调节显示器倾角7安全槽7连线8拆下后连接器盖板 8 连接器详述9重装后连接器盖板 10 自定义显示器 (11)音量调整11调节显示器显示11OSD 功能选择11OSD 菜单12故障排除 (16)故障排除过程16警告消息16故障排除17LCD平板显示器的技术特性和规格 18管理、警告和维护 (19)FCC一致性声明19TCO’99 20前言手册说明本手册为协助用户安装并使用本LCD显示器而编制。

虽然本文档内含信息已经过仔细的准确性检查，但是并不保证其内容完全正确。

本文档内含信息如有变更恕不另行通知。

本文档所含专有信息受版权保护。

保留所有权利。

非经制造商事前书面许可，本手册任何部分均不得以任何形式，以机械、电子或者其它方式进行复制。

2重要操作说明1. 请仔细阅读以下说明。

用户应保管好本手册以备将来使用。

2. 要清洁LCD显示器屏幕，首先确保显示器处于电源关闭状态。

显示器清洁之前须拔下电源。

本设备上切勿直接喷洒洗涤液。

使用微湿抹布擦拭屏幕，期间切勿重压。

3. 切勿覆盖或阻塞显示器后部通风孔。

4. 本LCD显示器安放位置一定要远离热源或打开的窗户，同时不得直受日晒、灰尘或机械振动。

5. 显示器到PC机信号软线上面不得放置任何物体。

软线放置区域一定不要经受践踏。

6. LCD屏幕上切勿施压。

重压可能导致显示屏永久损坏。

7. 切勿自行打开本设备盖板试图进行维修。

否则将被剥夺保修权利。

8. 本LCD显示器安全储藏温度范围介于摄氏负20到正60度之间。

9. 本显示器如果长期不用请拔下电源插头。

10. 本显示器运输过程中请使用原装纸箱及填充材料。

11. 如果发生以下情况，请立即拔下显示器电源插头，并电话联系授权技术人员：电源软线或显示器到PC机信号软线磨损或者损坏。

液体溅入显示器，或显示器遭受雨淋。

显示器跌落或外壳损坏。

发现明显的性能变化。

Dell™ 1704FPV 平板显示器关于本显示器前视图后视图侧视图底视图显示器规格Dell Soundbar（选配件）规格显示器保养使用可调显示器支架装上支架整理电缆使用倾斜、旋转和直立扩展卸下支架设置显示器连接显示器使用前面板按钮使用 OSD设置最佳分辨率使用 Dell Soundbar（选配件）转动显示器更改显示器转动角度转动操作系统故障排除排除显示器故障一般问题产品特定问题USB 问题排除 Soundbar 故障附录安全信息联系 Dell认证声明回收显示器设置指南本文档中的信息会随时变更，恕不另行通知。

2004®Dell™Inc.保留所有权利。

未经 Dell Inc.书面许可，严禁以任何形式复制本文档之内容。

本文中使用商标：Dell™, PowerEdge™, PowerConnect™, PowerVault™, Dell™ Dimension™, Inspiron™, OptiPlex™, Latitude™, Dell Precision™ 和 Dell | EMC是 Dell Inc.的商标；Microsoft,Windows和Windows NT是 Microsoft Corporation 的注册商标；Adobe为Adobe Systems Incorporated(Adobe系统公司)具有一定法律效力的注册商标； ENERGY STAR是美国环保署的注册商标。

作为 ENERGY STAR 合作伙伴，Dell Inc. 认定本产品符合ENERGY STAR 能效方面的标准。

EMC 是 EMC Corporation 的注册商标。

本文中用到其它商标和品牌名称均属其各自拥有人所有。

Dell Inc. 对于自己之外的商标和品牌名称没有任何专有利益。

2004 年 8 月1.OSD 菜单/选择按钮2.输入选择/向下按钮1.Dell Soundbar 安装架 — 用来安装 Dell Soundbar 选件2.防盗锁插槽 —用来锁住显示器以保证安全3.支架卸除按钮 — 按下可以松开支架4.VESA 安装槽孔（100mm [所装底板的背后]） — 用来安装固定显示器5.条形码序列号标签 — 如果您需要联系 Dell 寻求技术帮助，请参考这个标签6.锁按/松开按钮— 向下推显示器，按此按钮可以解锁显示器，然后将显示器抬高到想要的高度7.认证标签 — 列出了认证准许8.电缆固定夹 — 用来把电缆固定在其夹子中底视图1.电源接口 - 用来连接电源线2.Dell Soundbar 电源接口 - 用来连接 Soundbar（选配件）的电源线3.DVI 接口 - 用来连接计算机 DVI 线4.VGA 接口 - 用来连接计算机 VGA 线B 上行接口 - 用来将随显示器附带的 USB 线连接到显示器和计算机。

17寸笔记本大小是多少17寸笔记本大小介绍一：17寸显示屏的长度：43.18cm，宽度：32.385cm。

crt显示器的尺寸指显像管的对角线尺寸。

最大可视面积就是显示器可以显示图形的最大范围。

显像管的大小通常以对角线的长度来衡量，以英寸单位(1英寸=2.54cm)常见的有15英寸、17英寸、19英寸、20英寸等。

显示面积都会小于显示管的大小。

显示面积用长与高的乘积来表示，通常人们也用屏幕可见部分的对角线长度来表示15英寸显示器的可视范围在13.8英寸左右，17英寸显示器的可视区域大多在15~16英寸之间，19英寸显示器可视区域达到18寸英寸左右。

lcd(液晶)显示器的尺寸是指液晶面板的对角线尺寸，以英寸单位(1英寸=2.54cm)。

另外，一寸是一英寸了，即2.54厘米。

大小是指它的对角线长度。

因为对角线长度一定时，正方形面积最大，所以一样寸数的电视，4:3的会感觉比16:9的大。

17寸笔记本大小介绍二：17寸的屏幕，对角线为17寸，大约是43.2cm。

所谓的笔记本17英寸一般指的是17.3英寸，一般情况下，17.3英寸笔记本的外观实际尺寸大致是这样的：长度在410毫米左右，宽度大约为270到300毫米左右。

17寸笔记本大小介绍三：笔记本17英寸一般指的是17.3英寸，一般情况下，17.3英寸笔记本的外观实际尺寸大致是这样的：长度在410毫米左右，宽度大约为270到300毫米左右。

液晶屏幕大小指屏幕对角线的距离，所用的“寸”实际上是“英寸”(in)，不是平常用的寸，1(in)=2.54cm。

17寸的屏幕，对角线为17in，大约是43.2cm;反过来讲，如果测得的屏幕对角线距离，除以2.54就是平时所说的多少寸了，至于测量的话可以用卷尺、直尺，大约量一下一算就出来了。

一般笔记本尺寸有10.6、11.6、12.5、13.3、14、15.6、17.3、18.4等。

相关阅读：笔记本检修流程针对笔记本电脑的故障主要表现为硬件故障和软件故障，在对笔记本电脑进行检修时尽量按照如下流程。

规格书拼接比例：N(行)×M(列)拼接屏：支持各种尺寸、型号的LCD、PDP、DLP屏幕比例：4:3 16:9支持屏分辨率：1024*768 至 1920*1080(P)特色性能：梳状滤波器、3D数码梳妆滤波器3D降噪、支持背光自动调节HD高清信号接收、WCG-CCFL广色域增靓技术数字信号处理系统 Faston Engine宽视角低色偏技术独有双重图像补偿 Scaler 技术：使单独或分割画面清晰、柔和、色彩亮丽自主研发的逐点晶格画面调节技术：使屏与屏之间接缝处的画面自然流畅大幅度降低对拼接屏的边框宽度的要求精密的矩阵控制系统，可支持256路图像输入、输出独具特色的动画菜单，精致、方便操作简便的控制系统可以任意切割组合画面音频性能：支持SRS虚拟环绕、多种音效模式、自动音量调节画面调节：画中画，画外画，图像冻结、单画面输入、多画面输入主控输入：HDMI*2、TV端子；AV端子*3、S端子、分量端子（YpbPr/YCbCr)*2、D-Sub接口矩阵网络输入：AV端子*256接收制式：PAL B/G，DK，I和NTSC，SECAM音频接口：内置功放输出15w*2(4欧姆)图文：1000页图文存储功能丽音：支持NICAM，FM STEREO菜单语言：英语、法语、德语、土耳其语、西班牙语、俄语、葡萄牙语、意大利语、韩语、阿拉伯语、简体中文使用寿命：60000小时电源性能：标准220V AC.50HZ(可适应能力110V-260V宽电源)16路矩阵网络控制器分割器3X3(19”屏)拼接范例设备报价单一设备报价单二设备报价单三。