当前位置：文档之家 › ATO28XXT中文资料

ATO28XXT中文资料

  • 格式：pdf
  • 大小：57.72 KB
  • 文档页数：7

11/20/02 1ADVANCED ANALOGHYBRID-HIGH RELIABILITY DC/DC CONVERTERSATO28XXT SERIESDescriptionn 16 to 40 VDC Input Range (28VDC Nominal)n 5V, ±12V or 5V, ±15V Outputs Available n Indefinite Short Circuit and Overload Protectionn 15 Watts Output Powern Fast Loop Response for Superior Transient Characteristicsn Operating T emperature Range from -55°C to +125°C Availablen Popular Industry Standard Pin-outn Resistance Seam Welded Case for Superior Long Term Hermeticity n Efficiencies up to 81%n Shutdown from External Signal n 200,000 Hour MTBF at 85°CFeaturesATO28V Input, Triple OutputThree standard temperature grades are offered. Refer to Part Number section. They are provided in a stan-dard plug-in package for PC mounting or in a flanged package for more severe environments.These converters are manufactured in a facility fully qualified to MIL-STD-1772. All processes used to manu-facture these converters have been qualified to enable Advanced Analog to deliver compliant devices. Two screening grades are available to satisfy a wide range of requirements. The CH grade converters are fully compliant to MIL-PRF-38534 for class H. The HB grade converters are processed to full class H screening re-quirements but do not have class H element evalua-tion as directed by MIL-PRF-39534. Both grades are fully tested and operate over the full military tempera-ture range without derating of output power. Variations in electrical, mechanical and screening can be accom-modated. Extensive computer simulation using com-plex modeling enables modest design modifications to be accommodated. Contact Advanced Analog withspecific requirements.PD - 94582The ATO28XXT Series of DC/DC converters feature high power density and an extended temperature range for use in military and industrial applications. Designed to the nominal input requirements of MIL-STD-704D,these devices have nominal 28VDC inputs with +5V and ±12V or +5V and ±15V triple outputs to satisfy a wide range of requirements. The circuit design incor-porates a pulse width modulated push-pull topology operating in the feed-forward mode at a nominal switch-ing frequency of 250KHz. Input to output isolation is achieved through the use of transformers in the for-ward and feedback circuits.The advanced feedback design provides fast loop re-sponse for superior line and load transient characteris-tics and offers greater reliability and radiation toler-ance than devices incorporating optical feedback cir-cuits.ATO28XXT Series SpecificationsT CASE = -55°C to +85°C, V IN = +28V ± 5% unless otherwise specifiedNotes to SpecificationsABSOLUTE MAXIMUM RATINGSInput Voltage -0.5V to 50VPower Output Internally limited, 17.5W typical Soldering 300°C for 10 secondsTemperature Range 6 Operating -55°C to +115°C case Storage -65°C to +135°C1.Tested at each output.2.Parameter guaranteed by line and load regulation tests.3.At least 20 percent of the total output power should be taken from the (+5V volt) main output.4.Bandwidth guaranteed by design. Tested for 20KHz to 2MHz.5.An overload is that condition with a load in excess of the rated load but less than that necessary to trigger the short circuit protection and is the condition of maximum power dissipation.6.Above 85°C case temperature, derate output power linearly to 0 at 115°C case.ATO2812TATO2815T TESTSYMBOLCondition-55°C ≤ T C ≤ +85°C, V IN = 28 V DC ±5%, C L =0unless otherwise specifiedMin MaxMinMaxUnitsSTATIC CHARACTERISTICSOUTPUTVoltage 1 V OUT I OUT = 0 (main)I OUT = 0 (dual)1 TC = 25°COver TempTC = 25°C Over Temp 4.95 4.90 ±11.88 ±11.76 5.05 5.10 ±12.12 ±12.24 4.95 4.90 ±14.85 ±14.70 5.05 5.10 ±15.15±15.30V V V V Current 1,2,3 I OUT V IN = 16, 28, and 40 VDC (main) 0.0 2000 0.0 2000 mAV IN = 16, 28, and 40 VDC (dual)1 V IN = 16, 28, and 40 VDC (dual) 0.0 ±208 80 0.0 ±16780mA mVp-p Ripple Voltage 1,4V RIPBW = DC to 2 MHz (main) V IN = 16, 28, and 40 VDC BW = DC to 2 MHz (dual))4040mVp-pPower 1,2,3 P OUT V IN = 16, 28, and 40 VDC (main)(+dual) (-dual) (total)10 2.5 2.5 15 10 2.5 2.5 15 WW W W REGULATIONLine 1,3Load 1,3 VR LINE VR LOAD V IN = 16, 28, and 40 VDC I OUT = 0, 1000, 2000mA (main) V IN = 16, 28, and 40 VDC (dual) I OUT = 0, ±84, ±167mA (dual) V IN = 16, 28, and 40 VDCI OUT = 0, 1000, 2000mA (main) V IN = 16, 28, and 40 VDC I OUT = 0, ±84, ±167mA (dual)TC = 25°C Over Temp 25 ±30 ±60 50 ±6025 ±35±7550±75 mV mV mV mV mV INPUTCurrentRipple Current 4 I IN I RIP I OUT = 0, Inhibit (pin 8) Tied to input return (pin 10) I OUT = 0, inhibit (pin 2) = openI OUT = 2000 mA (main)I OUT = ±167mA (dual) BW = DC to 2MHz15405015 40 50 mA mA mAp-p EFFICIENCY E FF I OUT = 2000mA (main)I OUT = ±167mA (dual)TC = 25°C 76 76 % ISOLATION ISO Input to output or any pin tocase (except pin 7) at 500 VDC,TC = 25°C 100 100 M ΩLoad Fault Power Dissipation 3 P D Overload Short Circuit TC = 25°C8 6 8 6 WWSwitching Frequency F S I OUT = 2000mA (main)I OUT = ±167mA (dual)225 275 225 275 KHzInhibit Open Circuit VoltageV OI913913V3ATO28XXT SeriesT CASE = -55°C to +105°C, V IN = +28V ± 5% unless otherwise specifiedSpecificationsABSOLUTE MAXIMUM RATINGSInput Voltage -0.5V to 50VPower Output Internally limited, 17.5W typical Soldering 300°C for 10 secondsTemperature Range 6 Operating -55°C to +125°C case Storage -65°C to +135°C1.Tested at each output.2.Parameter guaranteed by line and load regulation tests.3.At least 20 percent of the total output power should be taken from the (+5V volt) main output.4.Bandwidth guaranteed by design. Tested for 20KHz to 2MHz.5.An overload is that condition with a load in excess of the rated load but less than that necessary to trigger the short circuit protection and is the condition of maximum power dissipation.6.Above 105°C case temperature, derate output power linearly to 0 at 125°C caseNotes to SpecificationsATO2812T/ESATO2815T/ESTESTSYMBOLCondition-55°C ≤ T C ≤ +105°C, V IN = 28 V DC ±5%, C L =0unless otherwise specified Min Max Min Max UnitsSTATICCHARACTERISTICSOUTPUTVoltage 1V OUTI OUT = 0 (main)I OUT = 0 (dual)1TC = 25°COver TempTC = 25°COver Temp 4.95 4.90 ±11.88 ±11.76 5.05 5.10 ±12.12 ±12.24 4.95 4.90 ±14.85 ±14.70 5.05 5.10 ±15.15 ±15.30V V V V Current 1,2,3 I OUT V IN = 16, 28, and 40 VDC (main) 0.0 2000 0.0 2000 mARipple Voltage 1,4 V RIP V IN = 16, 28, and 40 VDC (dual)1 V IN = 16, 28, and 40 VDC 0.0 ±208 80 0.0 ±16780mA mVp-pBW = DC to 2 MHz (main) V IN = 16, 28, and 40 VDC BW = DC to 2 MHz (dual))4040mVp-pPower 1,2,3 P OUT V IN = 16, 28, and 40 VDC (main)(+dual) (-dual) (total)10 2.5 2.5 15 10 2.5 2.5 15 WW W WREGULATION Line 1,3 Load 1,3 VR LINE VR LOAD V IN = 16, 28, and 40 VDC I OUT = 0, 1000, 2000mA (main) V IN = 16, 28, and 40 VDC (dual) I OUT = 0, ±84, ±167mA (dual) V IN = 16, 28, and 40 VDCI OUT = 0, 1000, 2000mA (main) V IN = 16, 28, and 40 VDC I OUT = 0, ±84, ±167mA (dual)TC = 25°C Over Temp 25 ±30 ±60 50 ±6025 ±35±7550±75mVmV mV mV mV INPUTCurrentRipple Current 4I IN I RIP I OUT = 0, Inhibit (pin 8) Tied to input return (pin 10) I OUT = 0, inhibit (pin 2) = open I OUT = 2000 mA (main) I OUT = ±167mA (dual) BW = DC to 2MHz15 40 50 15 40 50mA mA mAp-pEFFICIENCY E FF I OUT = 2000mA (main)I OUT = ±167mA (dual) TC = ±25°CTC = 25°C 76 76 %ISOLATION ISO Input to output or any pin tocase (except pin 7) at 500 VDC, TC = +25°CTC = 25°C 100 100 M Ω Load FaultPower Dissipation 3 P D Overload, TC = +25°C 5Short Circuit, TC = +25°CTC = 25°C8 68 6 W W Switching FrequencyF SI OUT = 2000mA (main) I OUT = ±167mA (dual)225 275225275KHzInhibit Open Circuit VoltageV OI 9 13 9 13 VATO28XXT Series T CASE = -55°C to +125°C, V IN = +28V ± 5% unless otherwise specifiedSpecificationsABSOLUTE MAXIMUM RATINGSInput Voltage -0.5V to 50VPower Output Internally limited, 17.5W typical Soldering 300°C for 10 secondsTemperature Range 6 Operating -55°C to +135°C case Storage -65°C to +135°CNotes to Specifications1.Tested at each output.2.Parameter guaranteed by line and load regulation tests.3.At least 20 percent of the total output power should be taken from the (+5V volt) main output.4.Bandwidth guaranteed by design. Tested for 20KHz to 2MHz.5.An overload is that condition with a load in excess of the rated load but less than that necessary to trigger the short circuit protection and is the condition of maximum power dissipation.6.Above 125°C case temperature, derate output power linearly to 0 at 135°C caseTESTSYMBOLCondition-55°C ≤ T C ≤+125°C, V IN = 28 V DC ±5%, C L =0unless otherwise specifiedATO2812T/HBATO2815T/HBMin Max Min Max UnitsSTATICCHARACTERISTICSOUTPUTVoltage 1V OUTI OUT = 0 (main)I OUT = 0 (dual)1TC = 25°COver TempTC = 25°COver Temp 4.95 4.90 ±11.88 ±11.76 5.05 5.10 ±12.12 ±12.24 4.95 4.90 ±14.85 ±14.70 5.05 5.10 ±15.15 ±15.30 V V V V Current 1,2,3I OUT V IN = 16, 28, and 40 VDC (main) 0.0 2000 0.0 2000 mARipple Voltage 1,4 V RIP V IN = 16, 28, and 40 VDC (dual)1 V IN = 16, 28, and 40 VDC 0.0 ±208 80 0.0 ±16780mA mVp-pBW = DC to 2 MHz (main) V IN = 16, 28, and 40 VDC BW = DC to 2 MHz (dual))4040mVp-pPower 1,2,3 P OUT V IN = 16, 28, and 40 VDC (main)(+dual) (-dual) (total)10 2.5 2.5 15 10 2.5 2.5 15 WW W WREGULATIONLine 1,3Load 1,3 VR LINE VR LOAD V IN = 16, 28, and 40 VDC I OUT = 0, 1000, 2000mA (main) V IN = 16, 28, and 40 VDC (dual) I OUT = 0, ±84, ±167mA (dual) V IN = 16, 28, and 40 VDCI OUT = 0, 1000, 2000mA (main) V IN = 16, 28, and 40 VDC I OUT = 0, ±84, ±167mA (dual)TC = 25°C Over Temp 25 ±30 ±60 50 ±6025 ±35±7550±75mVmV mV mV mV INPUTCurrentRipple Current 4 I IN I RIPI OUT = 0, Inhibit (pin 8) Tied to input return (pin 10) I OUT = 0, inhibit (pin 2) = open I OUT = 2000 mA (main) I OUT = ±167mA (dual) BW = DC to 2MHz15 40 50 15 40 50mA mA mAp-pEFFICIENCY E FF I OUT = 2000mA (main)I OUT = ±167mA (dual) TC = ±25°CTC = 25°C 76 76 %ISOLATION ISO Input to output or any pin tocase (except pin 7) at 500 VDC, TC = +25°CTC = 25°C 100 100 M Ω Load Fault Power Dissipation 3 P D Overload, TC = +25°C 5Short Circuit, TC = +25°CTC = 25°C8 68 6 W W Switching FrequencyF SI OUT = 2000mA (main) I OUT = ±167mA (dual)225 275225275KHzInhibit Open Circuit VoltageV OI 9 13 9 13 V5ATO28XXT SeriesATO28XXT Block DiagrameturnATO28XXT SeriesPin DesignationATO28XXT Case OutlinePart NumberingATO 28 15 T / CHM odelInput V oltage28 = 28VO utputsT = TripleO utput V oltages15 = 5V, ± 15V12 = 5V, ± 12VS creening Level—, E S, H B , C HPin No.Designation1 + Input 2+ 5V DC Input3 Output Return4 -Dual Output5 + Dual Output6 N/C7 Case Ground 8 Enable Input 9 N/C 10 Input ReturnOutput7ATO28XXT SeriesAvailable Standard Military Drawing (SMD) Cross ReferenceWORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331ADVANCED ANALOG: 2270 Martin Av., Santa Clara, California 95050, Tel: (408) 727-0500Visit us at for sales contact information .Data and specifications subject to change without notice. 11/02Available Screening Levels and Process Variations for ATO28XXT Series* Per Commercial StandardsStandardized Vendor Vendor Military Drawing CAGE SimilarPin Code Pin5962-9095401HXX 52467 ATO2815T/CH 5962-9095401HZX 52467 ATO2815TF/CH 5962-9160201HXX 52467 ATO2812T/CH 5962-9160201HZX 52467 ATO2812TF/CHRequirement MIL-STD-883 MethodNo Suffix ES Suffix HB Suffix CH Suffix Temperature Range-55°C to +85°C-55°C to +125°C-55°C to +125°C-55°C to +125°CElement Evaluation MIL-PRF-38534 Internal Visual 2017 ¬ Yes Yes Yes Temperature Cycle 1010, Cond C Cond A Yes Yes Constant Acceleration 2001, Cond A500g5,000g5,000gBurn-in 1015 48 hrs @ 85ºC48hrs @ 105°C160hrs @ 125°C 160hrs @ 125°C Final Electrical (Group A)MIL-PRF-38534 & Specification25°C25°C-55, +25, +125°C-55, +25, +125°CSeal, Fine & Gross 1014 Yes Yes YesExternal Visual2009¬Yes Yes Yes。

合集下载

富士通830mt 使用 中文 说明书

富士通830mt 使用 中文 说明书

1部件名称和功能车身电脑1.门闩无意中锁打开显示器。

当您打开液晶显示器，删除锁定滑动到右侧。

2.液晶显示这台计算机屏幕显示。

该模型是配备触摸屏幕，触摸屏已被粘贴。

“硬件” - “在触摸”o液晶显示器的特点以下是LCD的特性。

这些都不是有瑕疵，请注意。

▪液晶显示技术，使我们非常准确，而不是光点在屏幕上的一些不，有可能点燃所有的点。

▪液晶显示器已经在这台电脑上使用，制造过程，产品的不同颜色可能会为每个。

底纹的颜色可能会出现一些其它温度。

▪后像可以继续使用相同的长远的眼光。

后像会消失，一段时间后。

为了防止这种行为，关闭显示器或使用省电功能，我们建议使用屏幕保护程序。

▪这种状况可能会出现轻微的显着点和不平衡的。

3.佩恩（触摸屏型号）存储一直与触摸笔。

“硬件” - “在触摸”4.LCD状态显示显示计算机的状态这一点。

名称“零件” - “关于LCD状态显示”5.安全按钮附加应用“安全按钮”或“一触式按键设置”可用于安装（→“软件”- “软件目录”）。

附加应用程序通过设置密码“安全按钮”，用户认证可以做到的。

陪同的应用，“一触式按键配置通过使用功能，您可以调用，只需按下一个按钮，您的电脑”。

“安全” - “按钮”安全6.电源按钮打开控制台或个人电脑，待机（挂起）/恢复（恢复）是使按钮。

o请按从04秒电源按钮。

按住〇四秒电源按钮，计算机将关闭电源。

7.扬声器PC音频书籍印刷。

“函数” - “音量设置”o音量，请调整范围从扬声器Hizumanai声音设置和声音。

造成损坏扬声器。

8.键盘键入字符可以号令到PC。

“硬件” - “在键盘上”9.无线交换机（无线局域网模式只）无线局域网通信ON和OFF。

医院和飞机，在那里，请在设备限制使用其他电子开关为OFF。

o对于无线局域网，“Kasutamumeidoopushon”手册中请。

10. 平特操纵鼠标指针。

“硬件” - “为指针。

”体表电脑1.集成无线局域网天线（无线局域网模式只）内置的无线局域网天线。

XT800基础知识及功能应用介绍

XT800基础知识及功能应用介绍


基本资料
上市时间：2009年12月 手机制式： 双卡双待，支持3G双模 网络制式：
GSM/GPRS/CDMA1X/CDMA2000/CDMA1X EV-DO 适用频率：GSM：900/1800MHz 重 量 ：137g 尺寸/体积：120×61.8×11.4mm 外观样式：直板 可选颜色：黑色 触摸屏： 电容触摸屏 屏幕参数：彩色屏幕；480×854像素，3.7英寸， TFT材质； 操作系统：Google Android OS v2.0 处理器：ARM Cortex A8 标准配置：锂电池，充电器，电源适配器，耳机，数 据线，用户手册，保修卡
基本功能 外观设计
数和内存 传感器
附加功能
谢谢大家！
XT800基础知识及功能应用介绍
标准配置
这款手机是一款支持EVDO和GSM的双模双待手机。
这款手机同样采用Cortex TM A8的多核处理器，保 证 Android 2.0和全套谷歌应用的流畅运行。
并且，摩托罗拉XT800这款手机采也用3.7英寸的触 控屏幕，分辨率同样为FWVGA级别（854×480像 素），并且配备500万像素的自动对焦摄像头，不过 仅仅配备了LED闪光灯。
网络数据
『电信定制』 『双卡双待』 『WAPI』 『蓝牙接口』 『支持WAP浏览』
WIFI：802.11 b/g 数据线接口：HDMI接口，支持PC同步手机资料功能 电子地图：支持Google地图 GPS导航芯片：可直接进行GPS定位，同时手机还内置 电子罗盘功能 即时通信：移动QQ、飞信 E-Mail：支持多种邮件格式
基本功能 『和弦铃声』 『MP3铃声』 『来电铃声识别』 『情景模式』 『待机图片』 『图形菜单』 『主题模式』 『文件管理器』 『手写输入』 『中文输入』 『中文短信』 『多媒体短信』 『短信群发』 『话机通讯录』 『通讯录群组』 『通话记录』
MXwall XT2用户手册说明书

MXwall XT2用户手册说明书

USER MANUALDesigned and Manufactured in the USA 1-800-284-2131OVERVIEWTECHNICAL SPECIFICATIONS___________________________________________________________________________ WHAT’S IN THE BOX?_____________________________________________________________________________________ FRONT AND BACK________________________________________________________________________________________ HARDWARE INSTALLATION_____________________________________________________________________________ AVAILABLE CONFIGURATIONS_________________________________________________________________________ FRONT PANEL CONTROL________________________________________________________________________________ SOFTWARE INSTALLATION______________________________________________________________________________ USING THE SOFTWARE__________________________________________________________________________________ TROUBLESHOOTING_____________________________________________________________________________________ TECHNICAL SUPPORT____________________________________________________________________________________ LIMITED WARRANTY STATEMENT______________________________________________________________________3445678-9 10-16 171718Technical SpecificationsWhat’s in the box?MXwall XT2 FRONTMXwall XT2 BACKHARDware INSTALLATION1. Position MXwall XT2 conveniently and keep it unplugged.2. Connect displays to the MXwall XT2 and power on the displays.3. Connect any video source to the MXwall XT2.4. Optionally connect an RS-232 cable from a PC to the RS-232 port on the unit for additional control.5. Optionally connect an Ethernet cable to the MXwall XT2 for additional control.6. Turn on the MXwall XT2 and wait a few seconds for the unit to initialize.AVAILABLE CONFIGURATIONSIt is easy to create different configurations or modes that are easy to navigate through with theMXwall XT2. There are endless possibilities. Creating and switching between display modes is simple. Front panel buttons, on-screen-display, RS-232, and TCP/IP can be used to switch between modes at will.INDIVIDUAL MODEUsers can route individual input images to each displayindividually.VIDEO WALL MODEUsers can stretch an input image across 4 to 12 HD screenswith screen resolution of 1920 x 1080.User defined custom displays can be created with supplied softwareUsers can populate individual screens with multiple inputs. Add any of the input signals to play along side others within asingle display.QUAD MODECreate 4 four proportional sections, each displaying one ofany 4 input images.Front panel controlThe MXwall XT2 front panel displays the temperatureof the unit in degrees Celsius in order for users tomonitor and prevent overheating.Many settings can be changed from the Setup page of the touchscreen front panel by clicking the white bar next to the settings name. Please note that the baud rate and language cannot be changed. Buzzer: Turn the buzzer on or off.DHCP: Turn Dynamic Host Configuration Protocolon or offIP address: Set a static IP addressSubnet mask: Set a custom subnet maskDefault gateway: Set the default gatewayMAC address: Set a custom MAC addressThe Scene page on the front panel allows for easyplaying of preconfigured layouts. Simply press thenumber corresponding to the desired layout, thenpress ‘Recall’ to play the desired layout.The Status page on the front panel shows the currentinput to output mappings.SOFTWARE INSTALLATION1. Run qt_wall_installer.exe2. A Setup window will pop open. Select where you would like to save the QTWall software. It isrecommended that the default installation path be used. Click ‘Next >’.3. You will be asked to confirm the name of the Start Menu folder. Use the default name or choose adifferent name and then Click ‘Next>‘ to continue.SOFTWARE INSTALLATION (continued)4. You will be given the option to create a desktop shortcut. Then click ‘Next >’5. You will be given a prompt to confirm installation of the QTWall software. Click ‘Install’ to continuewith the installation.SOFTWARE INSTALLATION6. When the installation is complete a window will appear stating whether the installation wassuccessful or not. Click the ‘Finish’ button to exit or launch the QTWall software.USING the softwareLogging In1. Run the MXwall XT2 Software Manager.2. Log in using the default Account Settings.Username: ‘admin’, password: ‘admin’, then click the ‘Login’ button.Configuring Connection Settings1. The connection settings can be configured at the login prompt or from the software manager.2. To configure connection settings from the login prompt:1. Click ‘Settings’2. To connect to the MXwall XT2 unit over LAN, either manually enter the unit’s IP address in theIP Address bar, or select the magnifying glass search icon which will automatically detect the IP address. Then select ‘OK’.3. To connect to the unit over RS232, select ‘COM’. Enter the correct COM port and Baud Rate, andthen press ‘Connect’ and then ‘OK’.2. Here, choose whether to connect by network or serial port connection, enter the relevant information, then click ‘Set up’.3.Restart the software manager.3. To configure the connection settings from the software manager:1. Click the ‘Connect’ icon in the top navigation bar.Setting IP Address StaticallyThe IP address of the MXwall XT2 unit can be set statically from the connection settings window as shown in figure below. Simply enter the desired IP address and then press ‘Modify IP’.Creating Inputs and ViewsThe MXWall software manager represents output screens as a grid. In figure below the highlighted square represents screen 1 on a grid of 4 screen. The input source channels are listed on the left-hand side of the manager. To map an input source to an output screen, simply drag and drop the channel icon into the square representing the desired output screen. Alternatively, click on the desired channel, and then click and trace a window within the desired output section(s) on the grid; double-click the window to fill the output section(s).Input Source PaneThe various input channels can be managed from the Input Source Management Pane. Each channel number corresponds to the input port number on the back of the MXwall unit.Changing Settings1. To change video wall settings, click the settings icon in the navigation bar.2.From the settings window, it is possible to change the resolution and refresh rate pairs, alter thestart channel, and customize the number of rows and columns in the output section grid. After altering settings, click ‘Create’ and then ‘Modify MCU’ to save and apply the new settings.Creating Layouts and Scenes1. The MXwall XT2 allows users to create customizable layouts and then play them as scenes.2. After creating the desired layout, select ‘Autofill fields’ and then ‘Add’. This will create a layout.3. Then, in the navigation bar, select ‘Scenes’4. From the Scenes tab, select the appropriate layout(s), choose the time interval in seconds over whichthe layout(s) will play, and then click ‘Add’. Do this for up to 20 layouts in the order in which they will play.5. Then, click ‘Start’ to begin scene playback.Users PermissionsTo change user permissions, select the ‘Users’ icon in the navigation bar.From this window, user permissions and passwords can be easily changedTroubleshootingNo Power• Make sure that the power adapter is securely connected to the power connector of the unit.• Check the output voltage of the power supply and make sure that the voltage value is around 12VDC.• Replace the power supply.No Video• Check if all the video cables are connected properly.• Connect the computer directly to the monitor to verify that your monitor and computer are functioning properly.• Restart the computers.Keyboard is not working• Check if the keyboard is properly connected to the unit.• Check if the USB cables connecting the unit and the computers are properly connected.• Try connecting the USB on the computer to a different port.• Make sure that the keyboard works when directly connected to the computer.• Replace the keyboard.Mouse is not working• Check if the mouse is properly connected to the unit.• Try connecting the USB on the computer to a different port.• Make sure that the mouse works when directly connected to the computer.• Replace the mouse.No Audio• Check if all the audio cables are connected properly.• Connect the speakers directly to the computer to verify that the speakers and the computer audio are functioning properly.• Check the audio settings of the computer and verify that the audio output is through the speakers.Technical supportFor product inquiries, warranty questions, or technical questions, please contact *****************.Limited warranty statementA. Extent of limited warrantySmartAVI, Inc. warrants to the end-user customers that the SmartAVI product specified above willbe free from defects in materials and workmanship for the duration of 1 year, which duration beginson the date of purchase by the customer. Customer is responsible for maintaining proof of date of purchase.SmartAVI limited warranty covers only those defects which arise as a result of normal use of the product, and do not apply to any:a. Improper or inadequate maintenance or modificationsb. Operations outside product specificationsc. Mechanical abuse and exposure to severe conditionsIf SmartAVI receives, during applicable warranty period, a notice of defect, SmartAVI will at its discretion replace or repair defective product. If SmartAVI is unable to replace or repair defective product covered by the SmartAVI warranty within reasonable period of time, SmartAVI shall refund the cost of the product.SmartAVI shall have no obligation to repair, replace or refund unit until customer returns defective product to SmartAVI.Any replacement product could be new or like new, provided that it has functionality at least equal to that of the product being replaced.SmartAVI limited warranty is valid in any country where the covered product is distributed by SmartAVI.B. Limitations of warrantyTo the extant allowed by local law, neither SmartAVI nor its third party suppliers make any other warranty or condition of any kind whether expressed or implied with respect to the SmartAVI product, and specifically disclaim implied warranties or conditions of merchantability, satisfactory quality, and fitness for a particular purpose.C. Limitations of liabilityTo the extent allowed by local law the remedies provided in this warranty statement are the customers sole and exclusive remedies.To the extant allowed by local law, except for the obligations specifically set forth in this warranty statement, in no event will SmartAVI or its third party suppliers be liable for direct, indirect, special, incidental, or consequential damages whether based on contract, tort or any other legal theory and whether advised of the possibility of such damages.D. Local lawTo the extent that this warranty statement is inconsistent with local law, this warranty statement shall be considered modified to be consistent with such law.NOTICEThe information contained in this document is subject to change without notice. SmartAVI makesno warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI, Inc.20180109Designed and Manufactured in the USATel: (800) AVI-2131 • (702) 800-00052455 W Cheyenne Ave, Suite 112North Las Vegas, NV 89032。

SSTA28T116;MMSTA28T146;中文规格书,Datasheet资料

SSTA28T116;MMSTA28T146;中文规格书,Datasheet资料

Transistors Rev.A 1/2NPN general purpose transistorSSTA28 / MMSTA28z Features1) BV CES < 80V (Ic=100µA)z Package, marking and packaging specificationsz Absolute maximum ratings (T a=25°C)ParameterSymbol V CBO V CEO V EBO I C Tj TstgP C Limits 8080120.3150−55 to +1500.2Unit V V V A W °C °CCollector-base voltage Collector-emitter voltage Emitter-base voltage Collector currentCollector power dissipation Junction temperature Storage temperaturez External dimensions (Unit : mm)SSTA28MMSTA28ROHM : SST3JEDEC : SOT-23ROHM : SMT3EIAJ : SC-59JEDEC : SOT-346(1) Emitter(2) Base (3) Collector(1) Emitter (2) Base (3) Collector0~0.10.2Min.2.4±0.21.30.950.45±0.10.150.42.9±0.21.9±0.20.950.95 +0.2 −0.1−0.1 +0.2+0.1 −0.06+0.1−0.05(2)(1)(3)0~0.12.8±0.21.60.3M i n .1.10.8±0.10.150.42.9±0.21.9±0.20.950.95 +0.2 −0.1−0.1 +0.2 +0.1 −0.06+0.1−0.05(2)(1)(3)All terminals have same dimensionsAll terminals have same dimensionsz Electrical characteristics (T a=25°C)ParameterSymbol Min.Typ.Max.Unit ConditionsBV CBO BV EBO C O bBV CES I CBO I EBO I CES8080−−−−−−−−−−−−0.10.10.5V V V µA µA µA I C = 100µA I C = 100µA I E = 10µA V CB = 60V V EB = 10V V CE = 10V −V BE(on)− 1.4−5.08.02.0V V CE(sat) 1V CE(sat) 2−0.7 1.2V −0.8 1.5V I C /I B = 10mA/10µA I C /I B = 100mA/0.1mA V CE /I B = 5V/100mAV CE = 5V , I C = 10mA h FE 10000−−−V CE = 5V , I C = 100mA10000−f T 125200−MHz V CE = 5V , I E = 10mA , f = 100MHz V CB = 10V , I E = 0 , f = 1MHzCollector-base breakdown voltage Collector-emitter breakdown voltage Collector cutoff currentBase-emitter saturation voltage Collector-emitter saturation voltage DC current transfer ratio Transition frequency Emitter-base breakdown voltage 12Output CapecitancepFTransistors Rev.A 2/2z Electrical characteristic curvesI C -C O L L E C T O R C U R R E N T (m A )V CE -COLLECTOR-EMITTER VOLTAGE (V)Fig.1 Grounded emitter outputcharacteristicsI C -C O L L E C T OR C U R R E N T (m A )V CE -COLLECTOR-EMITTER VOLTAGE (V)Fig.2 Typical output characteristicsh F E -D C C U R R E N TG A I NI C -COLLECTOR CURRENT (mA)Fig.3 DC current gain vs. collectorcurrent ( ΙΙ )h F E -D C C U R R E N T G A I NI C -COLLECTOR CURRENT (mA)Fig.4 DC current gain vs. collectorcurrentV C E (S A T ) C O L L E C T O R E M I T T E R S A T U R A T I O N V O L T A G E (V )I C -COLLECTOR CURRENT (mA)Fig.5 Collecor emitter saturation voltage vs collector currentV C E (S A T ) C O L L E C T O R E M I T T E R S A T U R A T I O N V O L T A G E (V )I C -COLLECTOR CURRENT (mA)Fig.6 Base emitter saturation voltage vs collector currentV B E (O N ) B A S E E M I T T E R V O L T A G E (V )I C -COLLECTOR CURRENT (mA)Fig.7 Base emitter "ON" voltage vs collector currentC A P A C I T A N C E (p F )REVERSE BIAS VOLTAGE (V)Fig.8 Capacitancevs reverse bias voltageC U R R E N T G A I N -B A ND W I D T H P R O D U C T (M H z )I C -COLLECTOR CURRENT (mA)Fig.9 Current gain-bandwdth product vs collector currentAppendixAbout Export Control Order in JapanProducts described herein are the objects of controlled goods in Annex 1 (Item 16) of Export T rade ControlOrder in Japan.In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.Appendix1-Rev1.1分销商库存信息:ROHMSSTA28T116MMSTA28T146。