GMS31使用说明

CMS监控软件使用手册声明非常感谢您购买我公司的产品，如果您有什么疑问或需要请随时联系我们。

目录1软件安装及运行环境 (1)1.1 概述 (1)1.2 运行环境 (1)1.3 软件安装 (2)1.4 软件卸载 (2)2操作说明 (3)2.1 软件登录 (3)2.2 系统退出 (4)2.3 系统最小化 (5)2.4 查看软件系统版本 (5)3监控系统功能 (5)3.1 实时监控 (5)3.2 设备管理 (11)3.3 检索回放 (12)3.4 业务管理 (16)3.5 人员管理 (20)3.6 系统管理 (22)3.7 功能箱 (24)1软件安装及运行环境1.1概述适用于小型网络监控领域的安全防护监控设备管理软件基于windows平台，可运行于PC上可以浏览多个设备的摄像头实时监视视频可以浏览多个设备的摄像头录像回放视频可以配置多种定时布放，实现全电脑值守可以配置电子地图，清晰的描述各种设备所在的位置配置网络视频监控设备报警设置项，实现管理软件与监控设备报警联动视频自动备份功能，主要应用于IPC等无硬盘设备的后台数据备份对每个设备，每个设备窗口，每个设备通道可以建立监控计划为每个用户都单独的创建配置文件，各自的习惯和风格互不干扰操作管理界面支持中文、英文等8种语言注：本软件针对连接多台不同类型或型号的设备（NVR/HVR/DVR/DVS/IPC），此用户手册只对软件操作进行介绍，涉及到具体设备的功能设置请阅读相关的产品说明书。

本手册是为负责计划、执行或复查网络视频监控软件的硬件安装相关人员提供的。

您应具备相关设备（NVR/HVR/DVR/IPC）的基本操作知识和经验。

1.2运行环境操作系统Windows2000/xp/2003/Vista/Windows 7/Windows 8CPU 2.4GHz以上显卡必须支持硬件缩放(如ATI、TNT2 PRO)，建议使用ATI9800及以上显卡，双通道，显存128M以上/128bit内存1G或以上显示器1024*768以上分辨率的显示器网卡100/1000M注：若管理软件需管理解码的通道画面很多，建议内存、显卡、CPU选择更优配置1.3软件安装步骤一：双击CMS3.1软件安装包，出现如下图所示安装界面步骤二：单击“下一步”，选择软件安装路径，默认路径“C:\Program Files \CMS3.1”步骤三：单击“下一步”，等待安装完成，单击“完成”退出注：如果该计算机已安装不同版本的CMS，建议先卸载原版本CMS，再按照上述安装流程进行软件安装1.4软件卸载方式一：单击【开始】→【程序】→【CMS3.1】→【卸载CMS3.1】卸载软件将删除所有相关文件，建议在卸载前将录像文件和抓图图片文件备份，以免被删除。

WGK-31-301用户手册1. 产品简介：—数字微处理器功率因数控制器—独立于供电的3相电压测量输入—1*3七段数字LED显示—4个薄膜按键—TTL-RS232用于设置和自动测试—内部温度传感器—高级功能（电容器过载电流测量、平均周功率因数、最大值存储）—可用于报警/风扇控制的两个可编程继电器输出2. 外形及安装尺寸3. 接线及安装：请参考如下接线图进行安装接线接线图4. 控制器连接：—第一次上电，装置显示---，即参数还未编辑—此时，可以进行手动测试每一步的连接情况—按↑↓键，投入或切除每一步4.1参数设置：有几种方式可以设置参数：1）手动键盘设置2）通过PC快速设置3）自动设置下面分别加以介绍4.1.1．手动键盘设置—在手动模式下连续按下MODE键5秒（图1）—屏幕显示单词Set进入基本菜单参数（图2）—按MAN/AUT键进入子菜单（图3）—按MODE键返回上一级菜单（图3）—按↑↓键观察和修改已选择的参数值，如果在几秒钟内没有按键选择的参数再次显示（图3）—设置到最后一个参数时自动退出设置基本菜单参数表参数描述范围缺省值P.01 CT原边电流 Off…10,000offP.02 最小步长kvar(最低公倍率) 0.10…300 1.00P.03 额定电容电压（V）铭牌电压 80…750V 400P.04 重新连接时间（sec） 5…240sec 60P.05 灵敏度 5…600sec60P.06 LED1 第一步系数 0 (16)P.06 LED2 第二步系数 0 (16)除了最后两步下面步的编程和上面两步是同样的P.06 LED...①倒数第二步系数 0 (16)noA,ncA,FAn②P.06 LED...①最后一步系数 0 (16)noA,ncA,FAn②设置目标cosΦ值（感性）③ 0.8Ind…0.8Cap0.95①n=正常的控制器步②noA=没有报警的正常情况继电器打开ncA=没有报警的正常情况继电器闭合Fan=风扇控制③见测量和COSΦ设置部分最后两步可以设置为正常的段输出或者报警继电器和风扇控制，如果倒数第二步被设为报警继电器和风扇控制，那么最后一步不能设为正常的段输出。

S, M, L, and 31 Series■Straight-pattern flow coefficients (C v) from 0.004 to 0.16■ Low- and high-pressure service■Repeatable vernier handles available■Brass and 316 stainless steel materials2 Needle and Metering ValvesT U B E F I T T I N G SP I P E , W E L D , V C R , V C O F I T T I N G SS T A N D A R D T U B I N GM O D U L A R S Y S T E M DH O S E / F L E X I B L E T U B I N GB E L L O W S , D I A P H R A G M V A L V E SB A L L & P L U G V A L V E S31C H E C K & R E L I E F V A L V E SR E G U L A T O R S & F I L T E R S I N S T R U M E N T M A N I F O L D S Y S T E M SM E A S U R E M E N T D E V I C E SR E F E R E N C E SM E D I U M - H I G H - P R E S S U R ELock screw “locks in” flowsettings (knurled andslotted handles)Guide O-ring enhances stemalignment (S series only)Tapered stem tip accurately controls gas and liquid flow ratesStem threads are isolated from system fluidHandle stop helps prevent damage to stem and orifice Stem O-ring contains system fluid➀ D ownstream pressure 500 psig (34.4 bar) max when valve requiresadjustment at pressure due to strength limitations of the fine-pitch threads and high operating torque.➁ S tainless steel L series valves are not recommended for shutoff in vacuum or gas service, or for repetitive shutoff in liquid service.S series valve shown.High-Pressure Valves (31 Series)■ Flow coefficient of 0.04; orifice of 0.062 in. (1.6 mm) ■ 316 SS bar stock body ■ Straight and angle patterns ■ Metal-to-metal shutoff ■ 2° stem taper (included angle)■ P anel mounting ■ Round phenolic handle■ Swagelok tube fitting and female NPT end connectionsPressure-Temperature RatingsRatings based on optional Grafoil ® packing.Ratings limited to 450°F (232°C) at 3435 psig (236 bar) with standard PTFE packing.Packing nut permits simpleexternal adjustment Packingfully contained by 316 SS glands to prevent extrusion 440C SSregulating stemhardened for enhanced service lifeaccurately controls gas and liquid flow ratesMetal-to-metal shutoff31 SeriesMetering Valves—S, M, L, and 31 Series 3Materials of ConstructionLow-Pressure Valves (S, M, and L Series)234568791a 1b2234488759913456891027High-Pressure Valves (31 Series)TestingEvery Swagelok S, M, and L series metering valve is factory tested with nitrogen at 1000 psig (69 bar). Shell testing is performed to a requirement of no detectable leakage with a liquid leak detector.Every Swagelok L series metering valve is tested for bubble-tight seat shutoff at 100 psig (6.8 bar) differential pressure.Every Swagelok 31 series needle valve is factory tested with nitrogen at 1000 psig (69 bar). Seats have a maximum allowable leak rate of 0.1 std cm 3/min.S Series M SeriesL SeriesWetted components listed in italics.➀ Anaerobic-type adhesive.➁ Straight and double-pattern M series valves.➂ A ngle and cross-pattern M series valves do not contain a body seal.1a Cleaning and PackagingSwagelok metering valves with VCR end connections areprocessed in accordance with Swagelok Special Cleaning and Packaging (SC-11) catalog , MS-06-63, to ensure compliance with product cleanliness requirements stated in ASTM G93 Level C .Swagelok metering valves with other end connections are processed in accordance with Swagelok Standard Cleaning and Packaging (SC-10) catalog, MS-06-62, special cleaning and packaging are available as an option.4 Needle and Metering ValvesM series valve shown.S series—0.16 in. (4.1 mm) maximum panel thickness.M and L series—0.13 in. (3.3 mm) maximum panel thickness.31 SeriesFor angle-pattern 31 series valves, add -A to the ordering number.Example: SS-31RS4-AMaximum Flow—0.16 C vMaximum Flow—0.04 C vStraight PatternMetering Valves—S, M, L, and 31 Series 5DimensionsDimensions, in inches (millimeters), arefor reference only and are subject to change.Angle PatternAngle Pattern6 Needle and Metering ValvesTUBEFITTINGSPIPE,WELD,VCR,VCOFITTINGSSTANDARDTUBINGMODULARSYSTEMDHOSE/FLEXIBLETUBINGBELLOWS,DIAPHRAGMVALVESBALL&PLUGVALVES31CHECK&RELIEFVALVESREGULATORS&FILTERSINSTRUMENTMANIFOLDSYSTEMSMEASUREMENTDEVICESREFERENCESMEDIUM-HIGH-PRESSUREDouble PatternS and M Series■ Inlet valve handle can be set andlocked at desired maximum flow.■ Outlet valve handle can be used forfine flow control up to the presetmaximum of the inlet valve.S series valve shown.Cross PatternS and M Series■ Fluid flows between side portsaround stem in any stem position.■ Flow through branch port can bemetered in both directions.Ordering Information and DimensionsSelect an ordering number. For brass valves, replace SS with B.Example: B-SS2-XDimensions are for reference only and are subject to change.M series valve shown.Options and AccessoriesMetering Valves—S, M, L, and 31 Series 7Colored Handles31 SeriesBlack phenolic handles are standard. To order colored phenolic handles, add a handle color designator to the ordering number.Example: SS-31RS4-BL Handle KitsHandle kits contain handle, brass insert, and instructions.To order a black phenolic handle, use kit ordering number PH-5K -14K-BK.For colored phenolic handles, replace -BK in the kit ordering number with a handle color designator.Example: PH-5K-14K -BLAdjustable-Torque HandleVernier HandleS, M, and L Series■ Enhances control for setting flows.■ Features PTFE packing and two top-mounted torque adjustment screws.■ Is available in stainless steel materialon stainless steel valves and in chrome-plated brass on brass valves, as standard.To order, add -OH to the ordering number.Example: SS-SS1-OHAdjustable-Torque Handle Kits Kits contain all parts necessary to add an adjustable-torque handle to an existing valve.Slotted HandleS and M Series■ Helps ensure repeatable flow adjustments.■ Provides readings accurate to1/25 turn.To order, add -VH to an S series ordering number or -MH to an M or L series ordering number.Examples:S S-SS1-VHSS-2MG -MH Vernier Handle KitsKits contain all parts necessary to add a vernier handle to an existing valve.■ Allows flow setting adjustment with ascrewdriver.■ Is for use in installations wherehandle is not easily accessible.■ Is available in stainless steel materialon stainless steel valves and in chrome-plated brass on brass valves, as standard.■ Allows valve to be panel mountedwithout removing handle.To order, add -SL to the ordering number.Example: SS-SS1-SLDimensions, in inches (millimeters), are for reference only and are subject to change.1.82 (46.2)open(21.0)A openM series valve shown.Slotted Handle KitsKits contain all parts necessary to add a slotted handle to an existing valve.1.42 (36.1)open(12.2)Options and Accessories8 Needle and Metering ValvesT U B E F I T T I N G SP I P E , W E L D , V C R , V C O F I T T I N G SS T A N D A R D T U B I N GM O D U L A R S Y S T E M DH O S E / F L E X I B L E T U B I N GB E L L O W S , D I A P H R A G M V A L V E SB A L L & P L U G V A L V E S31C H E C K & R E L I E F V A L V E SR E G U L A T O R S & F I L T E R SI N S T R U M E N T M A N I F O L D S Y S T E M SM E A S U R E M E N T D E V I C E S R E F E R E N C E SM E D I U M - H I G H - P R E S S U R E High-Temperature Stem Packing Material31 SeriesGrafoil packing extends the temperature rating to 850°F (454°C) and requires fluorinated tungsten disulfide-based lubricant. To order, add -G to the ordering number.Example: SS-31RS4-G Stem Packing KitsPTFE and Grafoil packing kits are available. Kits include packing, lubricant, and instructions. Select a kit ordering number.Special Cleaning and Packaging (SC-11)All SeriesSwagelok metering valves with VCR end connections are processed in accordance with Swagelok Special Cleaning and Packaging (SC-11) catalog , MS-06-63, to ensurecompliance with product cleanliness requirements stated in ASTM G93 Level C .To order special cleaning and packaging for metering valves with other end connections, add -SC11 to the valve ordering number.Example: SS-SS1-SC11Oxygen Service HazardsFor more information about hazards and risks of oxygen-enriched systems, refer to Swagelok Oxygen System Safety technical report, MS-06-13.MS-01-142, RevM, November 2021Options and Accessories• A packing adjustment may be required periodicallyto increase service life and to prevent leakage.• To increase service life, ensure proper valveperformance, and prevent leakage, apply only as much torque as is required to achieve positive shutoff in L and 31 series valves that are rated for shutoff service.IntroductionSince 1947, Swagelok has designed, developed, and manufactured high-quality, general-purpose and specialty fluid system products to meet the evolving needs of global industries. Our focus is on understanding our customers’ needs, finding timely solutions, and adding value with our products and services.We are pleased to provide this global edition of the book-bound Swagelok Product Catalog, which compiles more than 100 separate product catalogs, technical bulletins, and reference documents into one convenient, easy-to-use volume. Each product catalog is up to date at the time of printing, with its revision number shown on the last page of the individual catalog. Subsequent revisions will supersede the printed version and will be posted on the Swagelok website and in the Swagelok electronic Desktop Technical Reference (eDTR) tool.For more information, visit your Swagelok website or contact your authorized Swagelok sales and service representative.Safe Product SelectionWhen selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings,proper installation, operation, and maintenance are the responsibilities of the system designer and user.Warranty InformationSwagelok products are backed by The Swagelok Limited Life-time Warranty. For a copy, visit or contact your authorized Swagelok representative.Not all trademarks listed below apply to this catalog. Swagelok, Cajon, Ferrule-Pak, Goop, Hinging-Colleting,IGC, Kenmac, Micro-Fit, Nupro, Snoop, Sno-Trik, SWAK, VCO, VCR, Ultra-Torr, Whitey—TM Swagelok Company 15-7 PH—TM AK Steel Corp.AccuTrak, Beacon, Westlock—TM Tyco International Services Aflas—TM Asahi Glass Co., Ltd.ASCO, El-O-Matic—TM Emerson AutoCAD—TM Autodesk, Inc.CSA—TM Canadian Standards AssociationCrastin, DuPont, Kalrez, Krytox, Teflon, Viton—TM E.I. duPont Nemours and Company DeviceNet—TM ODVADyneon, Elgiloy, TFM—TM Dyneon Elgiloy—TM Elgiloy Specialty Metals FM —TM FM GlobalGrafoil—TM GrafTech International Holdings, Inc.Honeywell, MICRO SWITCH—TM Honeywell MAC—TM MAC ValvesMicrosoft, Windows—TM Microsoft Corp.NACE—TM NACE InternationalPH 15-7 Mo, 17-7 PH—TM AK Steel Corp picofast—Hans Turck KGPillar—TM Nippon Pillar Packing Company, Ltd.Raychem—TM Tyco Electronics Corp.Sandvik, SAF 2507—TM Sandvik AB Simriz—TM Freudenberg-NOKSolidWorks—TM SolidWorks Corporation UL—Underwriters Laboratories Inc.Xylan—TM Whitford Corporation © 2021 Swagelok Company。

概念模型法建模
井（抽水井和注水井）可以赋值到点上，其 量可以为常数或是随时间变化的数值；河流可以 赋值水力传导系数、沿程上结点的水位和河床底 板标高，GMS可以根据河流所经单元的长度把单 位长度上的水力传导系数自动换算为相应单元的 等效水力传导系数，同时GMS也可以把已知结点 的水位和河床底板标高通过线性插值，得到河流 沿程上每个网格结点的水位和底板标高；渗透系 数、给水度等参数以及面状开采、面状补给可以 赋到多边形上，其值同样可以为常数或随时间变 化的值。
概念模型法建模
概念模型的建立在GMS软件界面上的Map 模块里，该模块里可以定义模型的类别以及 与类别对应的各种属性。在概念模型下需要 建立图层（coverage），图层里包含点 (node/vertices分别代表曲线的端点/结点)、 弧(arc，代表线性实体，如河流、沟渠)和多 边形(polygon，代表面状实体，如渗透系数 分区，面状补给区，面状开采区等)，在应用 中可以根据需要在点、弧、面上赋属性。
GMS软件入门
Groundwater Modeling System
GMS软件模块简介
Tins模块即三角不规 则网络(Triangulated Irregular Networks)，通常用来表 示相邻地层的界面， 多个TINs就可以被 用来建立实体(Solid) 模型或三维网格。
GMS软件模块简介
GMS软件的建模方法
栅格法（Grid Approach）和概念模 型法（Conceptual Model Approach）。 栅格法是一种简单、基本的建模方法， 但是栅格法建模是基于对网格的直接操 作，因此参数分区的赋值、边界条件的 指定和调参都非常繁琐，工作量巨大。 因此，在实际应用中概念模型法应用更 为广泛。