The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2008 by Bobrick Washroom Equipment, Inc.materialS:Stiles c—3/4'' (19mm) thick, Solid Color Reinforced Composite with GraffitiOff ™ surface thermoset and integrally fused into one homogenous piece. Surface, edge, core are to be the same color. Leveling device: 7 gauge, 3/16" (5mm) thick, corrosion-resistant, chromate-treated, double zinc-plated steel angle leveling bar bolted to stile; furnished with 3/8'' (10mm) stainless steel diameter threaded wedge anchor, hex nuts, lock washer, flat washers, and shoe retainers. Shoe: 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish; 4'' (102mm) high.Panels —1/2'' (13mm) thick, Solid Color Reinforced Composite with GraffitiOff ® surface thermoset and integrally fused into one homogeneous piece. Surface, edge, core are to be the same color.doors —3/4'' (19mm) thick, Solid Color Reinforced Composite with GraffitiOff ® surface thermoset and integrally fused into one homogeneous piece. Surface, edge, core are to be the same color.Posts (for 1093 Series screens only) — 1-1/4'' (32mm) square tubing; 18-8 S, type-304, 18-gauge (1.2mm) stainless steel with satin finish. Floor and ceiling connections are constructed of 18-8 S, type-304, heavy-gauge stainless steel. Furnished in 10-ft (305-cm) lengths; to be cut in field to job specifications.Headrail (for 1092 Series compartments only) —Extruded anodized aluminum with satin finish. Enclosed construction with sloping top. Face has raised grip-resistant edge.Designer's Notes: Headrails with integral curtain tracks and hooks are available for compartments without doors. Optional vinyl curtains are available.Wall Posts —1" x 1-1/2" (25 x 38mm) tubing; 18-8 S, type-304, 16-gauge (1.6mm) stainless steel with satin-finish. 58" (147cm) high, pre-drilled for door hardware.Heavy-duty Hardware (standard) — Hinges, door latches, door keepers, clothes hooks, door stop plates, and mounting brackets are constructed of 18-8 S, type-304, heavy-gauge stainless steel with satin finish. Threaded inserts are factory installed for securing hinges, door stop plates, and door latches. Theft-resistant, stainless steel pin-in-head Torx screws are furnished for door hardware and all mounting brackets. Barrel hinge is adjustable to adjust door swing of unoccupied toilet compartment from partially open to fully closed. Toilet compartment door is locked from inside by sliding door latch into keeper. Threaded inserts are factory installed to secure door hinges, latch and door stops. Two door stops prevents door from being kicked in/out beyond stile by vandals. Mounting screws for stile to panel bracket, latch keeper, and coat hook connections are through-bolted.institutional Hardware (.67 option) —Hinges, door latches, door keepers, clothes hook, U-channels, door stop plates and angle brackets are constructed of 18-8 S, type-304, heavy-gauge stainless steel with satin finish: one-piece, full-height hinge is 16 gauge (1.6mm); one-piece door keeper is 11 gauge (3.2mm);one-piece, full-height U-channels and angle brackets are 18 gauge (1.2mm). U-channels secure panels to stiles, and angle brackets secure panels and stiles to walls. Door latch slides on a shock-resistant nylon track. Two door stops prevent door from being kicked in/out beyond stile by vandals. Theft-resistant, stainless steel pin-in-head Torx screws are furnished for door hardware, U-channels, and angle brackets. Doors are equipped with a self-closing hinge. Threaded inserts are factory installed to secure door hinge, latch, and doorstops. Mounting screws for stile-to-panel brackets and latch keeper connections are through-bolted. To specify institutional hardware, add suffix .67 to series number. Example: specify 1092.67 for overhead-braced partitions furnished with institutional hardware, including factory-installed threaded inserts for door hardware attachment.inStallation:Bobrick installation instructions are packed with each shipment and are available also in advance on request.notes:1. Ceiling-hung and floor-to-ceiling toilet compartments require structural members (not furnished by Bobrick) in ceiling. For suggested types of ceiling supportsystems, see Bobrick Advisory Bulletin TB-32.2. Wall backing is required to secure the mounting brackets of panels, stiles, and wall posts. For suggested wall backing, see Bobrick Advisory Bulletin TB-46.3. Floor-anchored stiles are furnished with expansion shields and threaded rods. The expansion shields require minimum 2'' (50mm) penetration into minimum3'' (75mm) thick structural concrete.4. Bobrick stainless steel partition-mounted washroom accessories are available for mounting in panels between two compartments. See current Bobrick Catalogfor description of accessories. Cutouts in panels can be pre-cut for Bobrick models at factory if location and size of all cutouts and Bobrick model numbers are furnished at time of order.GUarantee:Bobrick toilet partitions including all hardware and mounting brackets are guaranteed to be free from defects in material and workmanship for a period of one year from date of purchase. Any products returned to Bobrick under this guarantee will be repaired or replaced at no charge. 10-Year Warranty: Bobrick ex-tends a ten-year limited warranty from date of purchase for SierraSeries® Solid Color Reinforced Composite partition panels, doors, and stiles against breakage, warpage, delamination and corrosion when materials are properly installed, and normally used.SpeCiFiCation:Water-resistant, solid color reinforced composite ____________________ (insert one: toilet partitions, dressing compartments, shower dividers, urinal screens) shall be _______________ (insert one: overhead-braced toilet partition or floor anchored, wall-hung, post-to-ceiling urinal screens). Stiles, panels and doors shall be constructed of Solid Color Reinforced Composite with GraffitiOff ® surface thermoset and integrally fused into one homogeneous piece. Surface, edges and core are to be same color. Solid Color Reinforced Composite material shall be covered by a 10-year limited warranty against breakage, warpage, corrosion, and delamination. Stiles and doors shall be 3/4'' (19mm) thick; panels shall be 1/2'' (13mm) thick. All units shall meet ICC and NFPA Class B or UBC Class II, ASTME 84 Fire-Resistance Standards. Stiles shall have leveling device that is concealed by a one-piece, type-304, satin-finish stainless steel shoe that is 4'' (102mm) high.Stiles, panels and doors shall be __________ (insert color name and number from current Bobrick catalog). Headrails for overhead-braced compartments shall be anodized aluminum with satin finish. **All door hardware and mounting brackets shall be type-304 stainless steel with satin finish. All doors shall be supplied with three hinges. Threaded inserts shall be factory installed for securing door hinges, latches and door stops. Theft-resistant, stainless steel pin-in-head Torx screws shall be furnished for door hardware and all mounting brackets. Through bolts shall be used for securing latch keeper, clothes hook and panel-to-stile brackets. A clothes hook shall be furnished for each door with heavy duty hardware option. Hinges shall be adjustable to hold doors of unoccupied compartments partially open or fully closed. Two door stops shall be furnished for each door to prevent it from being kicked in/out beyond stile by vandals. Manufacturer's service and parts manual shall be provided to the building owner/manager upon completion of project.**To specify Institutional hardware, replace end of specification paragraph with: .67 option All door hardware, U-channels, and angle brackets shall be type-304 stainless steel with satin finish: one-piece, full-height hinges shall be 16 gauge (1.6mm); one-piece door keepers shall be 11 gauge (3.2mm); one-piece, full-height U-channels and angle brackets shall be 18 gauge (1.2mm). U-channels shall be furnished to secure panels to stiles, and angle brackets furnished to secure panels and stiles to walls. Doors shall be equipped with a self-closing hinge. Two door stops shall be furnished for each door to prevent it from being kicked in/out beyond stile by vandals. A clothes hook shall be furnished for each door. Theft-resistant, stainless steel pin-in-head, Torx screws shall be furnished for door hardware, U-channels, and angle brackets. Through bolts shall be used for securing latch keeper and panel- to-stiles brackets. Threaded inserts shall be factory installed to secure all door hinges, latches, and doorstops. Manufacturer's service and parts manual shall be provided to the building owner/manager upon request._________________ (insert one: toilet Partitions, dressing Compartments, Shower dividers, Urinal Screens) shall be ____________________ Series (insert series number) of Bobrick Washroom equipment, inc., Clifton Park, new York; Jackson, tennessee; Los Angeles, California; Bobrick Washroom equipment Company, Scarborough, ontario; Bobrick Washroom equipment Pty. Ltd., Australia; and Bobrick Washroom equipment Limited, United Kingdom.The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. 1090 Revised 8/08 Printed in U.S.A. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2008 by Bobrick Washroom Equipment, Inc.。
黑鲨潘通色 2420CBlack Shark JoyBudsUser Manual黑鲨凤鸣真无线蓝牙耳机 超低延迟标准版使用说明书使用产品前请仔细阅读本说明书，并妥善保管。
Read this manual carefully before use, and retain it for future reference.产品按键功能介绍使用说明安全信息在使用本设备前，请先阅读所有安全信息以确保正确和安全使用。
为了防止可能的听力损伤，请勿长时间使用高音量。
• 请将本设备及其配件放置在儿童接触不到的地方，儿童可能在无意之中损坏本设备及其配件或吞下小零件导致危险。
• 请在温度 0℃～35℃ 范围内使用本设备，并在温度 -20℃～+45℃ 范围内存放设备及配件。
当环境温度过高或过低时，可能会引起设备故障。
• 请勿擅自拆卸或改装设备及其配件。
• 请遵守当地规定处理本设备、电池及其它附件，不可将它作为生活垃圾处理。
• 电池：- 请勿拆解、碰撞、挤压电池，避免引起漏液、过热、爆炸。
- 请勿将电池投入火中，否则会引起火灾或爆炸。
- 若电池出现严重鼓胀，请勿继续使用。
• 本设备配有不可拆卸的内置电池。
请勿自行更换电池，以免损坏电池或设备。
• 请遵守相关法律法规，不要在明确禁止使用耳机的环境中使用耳机。
• 当需要集中注意力在周围环境上时请勿使用该设备，例如驾驶汽车，骑行时等。
• 设备产生的无线电波可能会影响植入式医疗设备或个人医用设备的正常工作，比如起搏器、 植入耳蜗、助听器等。
若您使用了这些医用设备，请向制造商咨询使用本设备的限制条件。
• 在使用本设备时，请与植入的医疗设备（如起搏器、植入耳蜗等）保持至少 15 厘米的距离。
• 不使用耳机时，请将耳机放回充电盒中，以防止丢失并及时为耳机充电。
Correctly dispose of this product.This icon indicates that this product should not be disposed with other household wastes throughout the EU. To prevent the environment or human health from being damaged due to uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your device, use return and collection systems or contact the retailer from whom you purchase the device.Declaration of ConformityHereby, [Blackshark Technologies (Nanchang) Co., Ltd.]declares that this equipment is in compliance with Electromagnetic Compatibility Directive 2014/53/EU.The full text of the EU declaration of conformity is available at https://.Manufacturer: Room 815-1, Floor 8, Block A, Huajiang Building, No. 1 Tsinghua Science Park, No. 299, Yupingdong Street, Nanchang Economic and Technological Development Zone, Nanchang City, Jiangxi Province EU-Representative: Triskelion Technology SLAddress: Paseo de la Castellana 77, ed wework, 28046, Madrid, Spain Contact Email: info.eu@For warranty information, please visit https://.Join Black Shark at Like us on Facebook at /BlackSharkGlobal Follow us on Twitter at /blckshrk_globalFor more information性能参数耳机名称：黑鲨凤鸣真无线蓝牙耳机 超低延迟标准版耳机型号：BE18充电盒型号：BE18C 连接方式：蓝牙 5.2充电盒充电接口：Type-C 耳机电池容量：35mAh 充电盒电池容量：400mAh 充电盒额定输入：5V包装内容：耳机，充电盒，Type-C 数据线，说明书 ，二维码卡片SpecificationsEarphone name: Black Shark JoyBuds Earphone model: BE18Charging case model: BE18CConnection method: Bluetooth 5.2Charging case charging port: Type-C Earphone battery capacity: 35mAhCharging case battery capacity: 400mAh Charging case rated input: 5VContents: Earphones, Charging case, USB-C cable, User manual, QR code card产品中有毒有害物质的名称及含量本标识内数字表示产品在正常使用状态下的环保期限为 5 年。
Mobile Harbour Crane LHM 280Maximum lifting capacity84 tMaximum outreach40 mShip sizeFeedermax, Handymax510152030352540459080706050403020100The powerful hydrostatic transmission and advanced Liebherr electronics ensure short, productive workingcycles during bulk handling.Professional Bulk Handling / Turnover up to 1,000 t per Hour• During grab operation, hoisting, slewing, and luffing are driven simultaneously at maximized speed to achieve the highest (possible) turnover.• During grab filling, features such as automatic lowering and hoisting guarantee the optimum filling level of the grab.• The slack rope monitoring system ensures extended life-time of the ropes and increases operational safety.• Reverse power is returned to the drive process through closed loop hydraulics which results in reduced fuel consumption.• The Cycoptronic ®anti-sway system automatically compen-sates for all rotational swing, transverse and longitudinalsway of the load at maximum speeds.• To provide safe and stress-free working conditions for the operator, Liebherr offers the Cycoptronic ® including Teach-In ® feature, a semi-automatic system, which pilots thecrane from the vessel hatch to the quay without any sway.Especially for bulk operation into hoppers, the Teach-In ® system increases turnover and ensures consistent turnoverrates during the entire ship unloading.• Liebherr technology is absolutely resistant to all types ofdust and dirt due to the closed hydraulic system and anelectronic system which is military proven and tested.• The airflow needed for cooling hydraulic and enginesystems is routed external from the main machinery house. This helps keep the engine room clean and free of debris.Weight ramshorn hook 3.0 t; Weight rotator 2.5 t Weight ramshorn hook 3.0 t; Weight rotator 2.5 tBulk OperationBulk OperationE y e l e v e l 20.8 mOutreach (m)Load Diagramon the ropesmotor grab4-rope grabFeedermaxC a p a c i t y (t )9080706050403020100051015203035254045Precision to perfection: With incredibly short acceleration times for all crane motions, Liebherr is the top performer in container handling.• The crane can be fitted with various types of spreaders (fixed or telescopic) connected to the rotator. Manual, semior fully automatic telescopic spreaders are available forvarious container sizes.• Liebherr Cycoptronic ® is an accurate, sway-free load motion control system that uses in-house designed software.Cycoptronic ®allows for direct load positioning and aids the crane driver in mastering his task. With Cycoptronic ®turnover, safety and the confidence of the operator will beimproved.• Safety: The luffing cylinder is positioned above the latticeboom. This eliminates the possibility of any damage to the cylinder through swinging loads or highly stowed rows of containers on board the vessel.• The Liebherr hydrostatic drive is the most reliable and highest performing drive system for mobile harbour cranes. Independent closed loop hydraulic systems utilize the minimum number of components to guarantee highly responsive, smooth and precise operation while maximizingoperational safety.Weight rotator 2.5 tWeight fully automatic (telescopic) spreader 9 tWeight semi-automatic spreader 1.3 t (20 ft), 2.6 t (40 ft)Professional Container Handling / Turnover up to 35 Cycles per HourContainer OperationContainer OperationC Outreach (m)HandymaxLoad Diagramon the ropesautomaticsemi-automaticE y e l e v e l 20.8 mSchematic diagramMobility• Outstanding mobility and manoeuvrability• Curves at any possible radii and even slewing on the spo tModular propping system• Minimised stress and strain of undercarriage due to cruciform support base which directs the load path from boom tip to quay• Modular system allows further reduction of quay loads by installing additional axle sets • Easy adaptation to various sizes of support pads and basesTechnical DataUndercarriageWeightTotal weight of crane LHM 280approx. 241 tOptional size of supporting pads and bases on requestDue to a unique undercarriage design the quay loads specified above can even be reduced. Pad sizes, supporting base and the number of axle sets can easily beadapted to comply with the most stringent quay load restrictions.Optional EquipmentAdditional products and services • Cycoptronic ® – anti-sway system • SmartGrip − intelligent grabbing• Teach-In – semi-automatic point to point system • Sycratronic ® – synchronizing crane control system • Vertical Line Finder – diagonal pull preventing system • Collision alert system • LiDAT ® − smartApp• Economy software – for optimised fuel consumption • Video monitoring system• Radio remote control • Autopropping undercarriage• Cyclone air-intake system for the engine • Low temperature package • Customer-specific painting & logo • Additional (driven) axle sets• Axle sets equipped with foamed tyres • Different supporting bases and pad sizes • And many more as per customers´ requirementsHydraulic load distribution• Hydraulic suspension avoids overloading of individual wheel sets• Standard trailer tyres making requisition of spares economical and time-saving • Increased lifetime of tyres due to individually steerable wheel setsOptimum pressure distributionand adaption of wheel sets on uneven surfaces1.3 mLHM 280LFS 280LPS 280 LPM 280• The Liebherr Portal Crane (LPS) is an efficient combinationof a space-saving portal (mounted on rails) and the provenmobile harbour crane concept. Particularly on narrowquays, individual portal solutions permit (railway) trains and(road) trucks to travel below the portal.• Liebherr Fixed Slewing Cranes (LFS) are an efficientcombination of a mobile harbour crane upper carriage anda fixed pedestal. LFS cranes provide an economical andspace-saving solution for the installation on quaysides andjetties, especially where room for manoeuvring is limited andlow ground pressure is essential. Additionally LFS solutionsare also ideally suited for the installation on crane barges.• The Liebherr Portal M obile Crane (LPM) is the perfectcombination of a space-saving portal undercarriage,efficient mobile harbour crane technology and unrestrictedmobility. A gantry on rubber tyres enables the crane to betravelled from one quay to another. Supporting pads allowthe crane to be used on quays with or without rail tracks.The LPM offers the same 360-degree mobility as the LHM.Driving in longitudinal, diagonal or transverse direction.Performance of conventional steering or slewing on thespot is possible and provided as standard.HM351.2.4MCR-12138-6.18_enSubjecttochangewithoutnotice. Practical SolutionsLiebherr develops and produces special designs and solutionsto meet customer-specific requirements。
