DIN、EN、ISO、GB标准件对照表

DIN、EN、ISO、GB标准件对照表DIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 1 DIN 1052 DIN 11024 DIN 1151 DIN 125－1 DIN 125－2 DIN 126 DIN 127－1 DIN 127－2 DIN 128 DIN 13257 DIN 137 DIN 1440 DIN 1441 DIN 1444 DIN 1471 DIN 1472 DIN 1473 DIN 1474 DIN 1475 DIN 1476 DIN 1477 DIN 1479 DIN 1480 DIN 1481 DIN 1587 taper pins washers for timber connectors spring cotters round plain head nails plain washers without chamfer plain washers with chamfer plain washers spring lock washers with tang ends spring lock washers with square ends curved spring lock washers belting bolts (elevator bolts) wave spring washers plain washers for clevis pins Washers, Type Coarse for Bolts clevis pins with head grooved pins, taper grooved grooved pins, taper grooved half length grooved pins, parallel grooved full length grooved pins, reserve grooved half length grooved pins, centre grooved grooved pins with round head grooved pins with countersunk head turnuckles(centre parts), made out of hexagon bar turnuckles with eye bolt and hook bolt spring pins, heavy type hexagon domed cap nuts ISO 8752 GB/T 879.1 GB/T 802 EN 22341 ISO 2341 ISO 8744 ISO 8745 ISO 8740 ISO 8741 ISO 8742 ISO 8746 ISO 8747 GB/T 882 GB/T 13829.2 GB/T 13829.2 GB/T 13829.1 GB/T 13829.2 GB/T 13829.1 GB/T 13829.3 GB/T 13829.3 EN 28738 ISO 8738 GB/T 955 GB/T 97.3 ISO 7089 ISO 7090 ISO 7091 GB/T 97.1 GB/T 97.2 GB/T 95 GB/T 7244 GB/T 93 GB/T 7245 英文名称 EN EN 22339 ISO ISO 2339 GB GB/T 117 圆锥销木材连接用垫圈弹簧卡子沉头钢钉平垫圈平垫圈平垫圈 A级倒角型 C级 A级中文名称1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26重型弹簧垫圈标准弹簧垫圈鞍形弹簧垫圈平板螺栓波形弹性垫圈销轴用平垫圈螺栓用粗制垫圈销轴槽销槽销槽销槽销槽销槽销槽销锥槽（A 型）锥槽（B 型）平行沟槽（B 型）锥槽（C 型）平行沟槽（C 型）圆头、沉头（A 型）圆头、沉头（B 型）六角螺母棒花篮螺栓弹性圆柱销直槽组合式盖形螺母 page 1 of 10 重型E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.docDIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 1804 DIN 1816 DIN 18182 DIN 186 DIN 188 DIN 2093 DIN 258 DIN 261 DIN 28129 DIN 3017 DIN 315 DIN 316 DIN 317 DIN 319 DIN 3404 DIN 3567 DIN 3570 DIN 404 DIN 417 DIN 427 DIN 431 DIN 432 DIN 433 DIN 434 DIN 435 DIN 436 英文名称 slotted round nuts for hook spanner round nuts with set holes dry wall screws T－head bolts with square neck T－head bolts with double nip disc springs taper pins with threaded end T－head bolts Clamp nuts for covers hose clamps wing nuts with rounded wings wing screws Amercia form wing screws Germany form ball knobs lubricating nipples, button head shackles for conduilts stirrup bolts (U－bolts) slotted capstan screws slotted set srews with full dog point slotted set srews with chamfered end pipe nuts with thread as in ISO 228－1 external tab washers (locking tab washers) washers for cheese head screws square taper washers for U－section square taper washers for I－sections square washers ISO 7092 GB/T 856 GB/T 848 GB/T 853 GB/T 852 外舌止动垫圈小垫圈 A级 EN 27435 ISO 7435 ISO 2342 GB/T 832 GB/T 75 JB/T 7490.1 GB/T 62 喉箍蝶型螺母蝶型螺钉(美制) 蝶型螺钉(德制) 圆球型盖型螺母直通式压注油杯管夹 U 型螺栓开槽带孔球面圆柱头螺钉开槽长圆柱端紧定螺钉ISO 8737 GB/T 881 GB/T 37 EN ISO GB 中文名称开槽圆螺母（配合沟头扳手）圆螺母（带插销孔）干壁钉（墙板钉） T 型槽用螺栓 T 型双接头螺栓盘型弹簧垫圈螺尾锥销 T 型头螺栓27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52槽钢用方斜垫圈工字钢用方斜垫圈方垫圈 page 2 of 10E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.docDIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 438 DIN 439－1 DIN 439－2 英文名称 slotted set screws with cup point Hexagon thin nuts (unchamfered) －Product grade B Hexagon thin nuts (chamfered) －Product grades A and B rounds washers for wood constructions sealing caps, push－in type eyebolts internal tab washers tab washers with short and long tab at right angles knurled thumb screws with collar slotted knurled thumb screws with collar knurled nuts with collar knurled nuts sealing washers retaining rings for shafts (external), circlips retaining rings for bores (internal), circlips square head bolts with collar square head bolts with half dog point square head bolts with collar, half dog point and rounded end T－slot nuts single end studs masonry bolts slotted round nuts round nuts with drilled holes in one face GB/T 799 GB/T 817 GB/T 815 ISO 299 GB/T 894.1 GB/T 893.1 GB/T 806 GB/T 807 GB/T 855 GB/T 834 GB/T 798 EN EN 27436 ISO ISO 7436 ISO 4036 ISO 4035 ISO 8675 ISO 7094 GB GB/T 74 GB/T 6174 GB/T 6172.1 中文名称开槽凹端紧定螺钉六角薄螺母六角薄螺母无倒角53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75DIN 440 DIN 443 DIN 444 DIN 462 DIN 463 DIN 464 DIN 465 DIN 466 DIN 467 DIN 470 DIN 471 DIN 472 DIN 478 DIN 479 DIN 480 DIN 508 DIN 525 DIN 529 DIN 546 DIN 547木螺钉专用垫圈密封帽活节螺栓内舌止动垫圈双耳止动垫圈滚花高头螺钉开槽滚花高头螺钉滚花高螺母滚花薄螺母锁紧垫圈轴用弹性挡圈－A 型孔用弹性挡圈－A 型方头带垫螺栓方头圆柱底端螺栓方头带垫半圆底端螺栓 T 型槽螺母单头螺柱地脚螺栓带槽圆螺母端面带孔圆螺母 page 3 of 10E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.docDIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 551 DIN 553 DIN 555 DIN 557 DIN 558 DIN 561 DIN 562 DIN 571 DIN 580 DIN 582 DIN 601 DIN 603 DIN 604 DIN 605 DIN 607 DIN 608 DIN 609 DIN 610 DIN 6303 DIN 6319 DIN 6325 DIN 6330 DIN 6331 DIN 6334 DIN 653 DIN 660 英文名称 slotted set screws with flat point slotted set screws with cone point hexagon nuts Product grade C square nuts hexagon screws hexagon set screws with full dog point square thin nuts －Product grade B hexagon head wood screws (coach screws) lifting eye bolts lifting eye nuts hexagon bolts mushroom head square neck bolts (carriage bolts) flat countersunk nib bolts flat countersunk long square neck bolts cup head nib bolts flat countersunk short square neck bolts hexagon fitted bolts, long thread hexagon fitted bolts, short thread Knurled nuts spherical washers, conical seats parallel pins hexagon nuts, 1.5d hexagon nuts, 1.5d with collar hexagon nuts, 3d knurled thumb screws thin type round head rivets ISO 1051 GB/T 835 GB/T 867 ISO 8734 GB/T 119.2 GB/T 56 圆柱销淬硬钢和马氏体不锈钢厚六角螺母厚六角法兰面螺母长六角螺母滚花平头螺钉半圆头铆钉 page 4 of 10 ISO 4016 ISO 8677 GB/T 5780 GB/T 14 ISO 3266 GB/T 102 GB/T 825 ISO 4018 EN EN 24766 EN 27434 ISO ISO 4766 ISO 7434 ISO 4034 GB GB/T 73 GB/T 71 GB/T 41 GB/T 39 GB/T 5781 中文名称开槽平端紧定螺钉开槽锥端紧定螺钉六角螺母方螺母 C级 C级 C级76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101六角头螺栓全螺纹六角头圆柱端紧定螺钉方型薄螺母六角头木螺钉吊环螺钉吊环螺母六角头螺栓 C级 B级大半圆头方颈螺栓沉头带插销马车螺栓沉头长方颈马车螺栓半圆头带插销马车螺栓沉头短方颈马车螺栓六角头精配螺栓（长螺纹）六角头精配螺栓（短螺纹）E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.docDIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 661 DIN 662 DIN 674 DIN 6797 (A) DIN 6797 (J) DIN 6798 (A) DIN 6798 (J) DIN 6799 DIN 6885 DIN 6888 DIN 6899 DIN 6900－1 DIN 6901 DIN 6912 英文名称countersunk head rivets raised contersunk head rivets mushroom head rivets toothed lock washers (with external teeth) toothed lock washers (with internal teeth) serrated lock washers (with external teeth) serrated lock washers (with internal teeth) retaining rings for shafts (E－rings), circlips parallel keys(form A ) woodruff keys thimbles screws and washers assemblies tapping screws and washers assemblies hexagon socket thin head cap screws with pilot recess for wrench key GB/T 18230.1 ISO 10644 ISO 10510 GB/T 9074.1 GB/T 9074.18 ISO 773/2491 ISO 3912 GB/T 1099 EN ISO ISO 1051 ISO 1051 ISO 1051 GB/T 862.1 GB/T 861.1 GB/T 862.2 GB/T 861.2 GB/T 896 GB GB/T 869 GB/T 870 沉头铆钉半沉头铆钉大扁头铆钉外齿锁紧垫圈内齿锁紧垫圈外锯齿锁紧垫圈内锯齿锁紧垫圈开口挡圈平键（A 型）半圆键嵌环（支撑环）螺栓或螺钉和平垫圈组合件自攻螺钉和平垫圈组合件矮头内六角圆柱头螺钉栓接结构用大六角头螺栓 GB/T 3106 C 级螺纹长度按中文名称102 103 104 105 106 107 108 109 110 111 112 113 114 115 116DIN 6914High－strength hexagon head bolts with large widths across flats for structural steel bolting8.8 和 10.9 级短螺纹长度GB/T 18230.2栓接结构用大六角头螺栓 C级 8.8 和 10.9 级117 118 119 120 121DIN 6915 DIN 6916 DIN 6917 DIN 6921 DIN 6922Steel hexagon nuts with large widths across flats for high－strength structural bolting round washers for friction grip bolts spuare taper washers for friction grip bolts on T－sections Hexagon flange bolt EN 1665 EN 1665GB/T 18230.4 GB/T 18230.5栓接结构用 1 型大六角螺母栓接结构用平垫圈B级10 级淬火并回火E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.doc page 5 of 10DIN 和 ISO、国内标准参考对照表－紧固件序号 DIN DIN 6923 DIN 6924 DIN 6925 DIN 6926 hexagon flange nuts Prevailing torque type hexagon nuts with nylon insert prevailing torque type hexagon nuts, all metallic nuts Prevailing torque type hexagon nuts with flange (with nylon insert) Prevailing torque type all metal hexagon nuts with flange parallel pins adjusting rings, heavy range (shafting collars) adjusting rings, light range (shafting collars) tab washers for slotted round nuts blind rivets rivets for brake and clutch lining spiral pins Spiral pin, heavy duty spring pins, light type washers for bolts withheavy type spring pins wire rope clips threadforming screws for ISO －metric thread ISO 8750 ISO 8748 ISO 13337 GB/T 858 GB/T 12617/12618 GB/T 875/975 GB/T 879.4 GB/T 879.3 GB/T 879.2 圆螺母用止退垫圈开口型抽芯铆钉（沉头、扁圆头）扁平头半空心/全空心铆钉弹性圆柱销弹性圆柱销弹性圆柱销卷制卷制直槽标准型重型轻型EN 1663 EN 1666 EN 1664 EN 1667 英文名称EN EN 1661 ISO ISO 4161 ISO 7040 ISO 10512 ISO 7042 ISO 7043 ISO 12125 ISO 7044 ISO 12126 ISO 2338 GB GB/T 6177.1 GB/T 889.1 GB/T 889.2 GB/T 6185.1 GB/T 6183.1 GB/T 6183.2 GB/T 6187.1 GB/T 6187.2 GB/T 119.1 六角法兰面螺母 1 型非金属嵌件六角锁紧螺母 1 型非金属嵌件六角锁紧螺母 2 型全金属六角锁紧螺母非金属嵌件六角法兰面锁紧螺母非金属嵌件六角法兰面锁紧螺母全金属六角法兰面锁紧螺母全金属六角法兰面锁紧螺母圆柱销细牙细牙细牙中文名称122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138DIN 6927 DIN 7 DIN 703 DIN 705 DIN 70952 DIN 7337 DIN 7338 DIN 7343 DIN 7344 DIN 7346 DIN 7349 DIN 741 DIN 7500 不淬硬钢和奥氏体不锈钢重型弹性圆柱销用垫圈卡头 ISO 公制螺纹螺钉(多种头型)E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.doc page 6 of 10DIN 和 ISO、国内标准参考对照表－紧固件序号DIN 英文名称EN ISO ISO 10666 ISO 15480 GB GB/T 3098.11 GB/T 15856.5 GB/T 15856.1 GB/T 15856.2 GB/T 15856.3 紧固件机械性能中文名称自钻自攻螺钉六角凸缘自钻自攻螺钉十字槽盘头自钻自攻螺钉十字槽沉头自钻自攻螺钉十字槽半沉头自钻自攻螺钉开槽切削螺纹螺钉(多种头型) 十字槽切削螺纹螺钉(多种头型)139DIN 7504self－drilling tapping screwsISO 15481 ISO 15482 ISO 15483140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155DIN 7513 DIN 7516 DIN 787 DIN 7965 DIN 7968 DIN 7971 DIN 7972 DIN 7973 DIN 7976 DIN 7980 DIN 7981 DIN 7982 thread cutting screws thread cutting screws cross recess T－slot screws tee nuts with pronge hexagon head fitted bolts for steel structures pan head tapping screws with slot countersunk flat head tapping screws with slot raised countersunk oval head tapping screws with slot hexagon tapping screws spring lock washers for screws with cylindrical heads pan head tapping screws with cross recessed countersunk flat head tapping screws with cross recessed raised countersunk oval head tapping screws with cross recessed hexagon socket head cap screws with, reduced head pan head screws with cross recessed washers for steel structures ISO 7045 GB/T 818 ISO 7049 ISO 7050 GB/T 845 GB/T 846 ISO 1481 ISO 1482 ISO 1483 ISO 1479 GB/T 5282 GB/T 5283 GB/T 5284 GB/T 5285 ISO 299T 型槽螺钉 T 型四爪螺母开槽盘头自攻螺钉开槽沉头自攻螺钉开槽半沉头自攻螺钉六角头自攻螺钉圆柱头螺钉用弹簧垫圈十字槽盘头自攻螺钉十字槽沉头自攻螺钉DIN 7983 DIN 7984 DIN 7985 DIN 7989ISO 7051GB/T 847十字槽半沉头自攻螺钉薄型内六角圆柱头螺钉十字槽盘头螺钉E:\lee\技术文档\DIN 和 ISO、国内标准参考对照表－紧固件.docpage 7 of 10。

新德标旧德标 英文名 中文名 国标 DIN EN ISO 4014DIN 931-1 Hexagon head bolts - Product grades A and B(ISO 4014:1999) 六角头螺栓 GB/T 5782-2000 DIN EN ISO 4016DIN 601 Hexagon head bolts - Product grade C(ISO 4016:1999) 六角头螺栓 C 级 GB/T 5780-2000 DIN EN ISO 4017DIN 933 Hexagon head screws - Product grade A and B (ISO 4017:1999) 六角头螺栓 全螺纹 GB/T 5783-2000 DIN EN ISO 4018DIN 558 Hexagon head screws - Product grade C (ISO 4018:1999) 六角头螺栓 全螺纹 C 级 GB/T 5781-2000 DIN EN ISO 8676DIN 961 Hexagon head screws with metric fine pitch thread - Product grade A and B(ISO 8676:1999) 六角头螺栓 细牙 全螺纹 GB/T 5786-2000 DIN EN ISO 8765DIN 960 Hexagon head bolts with fine pitch thread - Product grades A and B(ISO 8765:1999) 六角头螺栓 细牙 GB/T 5785-2000 DIN EN ISO 4032DIN 934 Hexagon nuts,style 1-Product grades A and B(ISO: 4032:1999) 1型六角螺母 GB/T 6170-2000 DIN EN ISO 4033Hexagon nuts,style 2-Product grades A and B(ISO: 4033:1999) 2型六角螺母 GB/T 6175-2000 DIN EN ISO 4034DIN 555 Hexagon nuts - Product grade C (ISO 4034:1999) 六角螺母 C 级 GB/T 41-2000 DIN EN ISO 4035DIN 439-2 Hexagon thin nuts(chamfered)-Product grade A and B (ISO 4035:1999) 六角薄螺母 GB/T 6172.1-2000 DIN EN ISO 4036DIN 439-1 Hexagon thin nuts - Product grade B(unchamfered)(ISO 4036:1999) 六角薄螺母 无倒角 GB/T 6174-2000 DIN EN ISO 8673DIN 934| DIN 971-1 Hexagon nuts,style 1,with metric fine pitch thread - Product grades A and B (ISO 8673:1999) 1型六角螺母 细牙 GB/T 6171-2000 DIN EN ISO 8674DIN 971-2 Hexagon nuts,style 2,with metric fine pitch thread - Product grades A and B (ISO 8674:1999) 2型六角螺母 细牙 GB/T 6176-2000 DIN EN ISO 8675DIN 439-2 Hexagon thin nuts with metric fine pitch thread - Product grades A and B (ISO 8675:1999) 六角薄螺母 细牙 GB/T 6173-2000 DIN EN ISO 4762DIN 912 Hexagon socket head cap screws(ISO 4762:1997) 内六角圆柱头螺钉 GB/T 70.1-2000 DIN EN ISO 7380Hexagon socket button head sxrews (ISO 7380:1997) 内六角平圆头螺钉 GB/T 70.2-2000 DIN EN ISO 10642DIN 7991 Hexagon socket countersunk head screws (ISO 10642:1997) 内六角沉头螺钉 GB/T 70.3-2000 DIN EN ISO 1207DIN 84 Slotted cheese head screws-Product grade A(ISO 1207:1992) 开槽圆柱头螺钉 GB/T 65-2000 DIN EN ISO 1580DIN 85 Slotted pan head screws-Product grade A(ISO 1580:1994) 开槽盘头螺钉 GB/T 67-2000 DIN EN ISO 2009DIN 963 Slotted countersunk flat head screws(common head style)(ISO 2009:1994) 开槽沉头螺钉 GB/T 68-2000 DIN EN ISO 2010 DIN 964 Countersunk slotted raised head screws(common head style)-Produce grade A(ISO 2010:1994) 开槽半沉头螺钉GB/T 69-2000DIN EN ISO 7045DIN 7985 Pan head screws with type H or type Z cross recess-Product grade A(ISO 7054:1994) 十字槽盘头螺钉 GB/T 818-2000 DIN EN ISO 7046-1DIN 965 Countersunk flat head screws (common head style)with type H or type Z cross recess,product grade A-Part 1:Steel of property class 4.8(ISO 7046-1:1994) 十字槽盘头螺钉 第1部分：钢4.8级 GB/T 819.1-2000 DIN EN ISO 7046-2DIN 965 Cross recessed countersunk flat head screws (common head style),product grade A-Part2:Steel of property class 8.8,stainless steel and nonferous metals(ISO 7046-2:1990) 十字槽沉头螺钉 第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3 GB/T 819.2-1997 DIN EN ISO 7047DIN 966 Countersunk raised head screws (common head style) with type H or type Z cross recess-Product grade A(ISO 7047:1994) 十字槽半沉头螺钉 GB/T 820-2000 DIN EN ISO 7048Cross recessed cheese head screws (ISO 7048:1998) 十字槽圆柱头螺钉 GB/T 822-2000 DIN EN ISO 10644Screw and washer assemblies with plain washers-Washer hardness classes 200HV and 300HV(ISO 10644:1998) 螺栓或螺钉和平垫圈组合件 GB/T 9074.1-2002 DIN EN ISO 10510Tapping screw and washer assemblies with plain washers(ISO 10510l:1999) 自攻螺钉和平垫圈组合件 GB/T 9074.18-2002 IDN EN ISO 15480Hexagon washer head drilling screws with tapping screws thread (ISO 15480:1999) 六角凸缘自钻自攻螺钉 GB/T 15856.5-2002 IDN EN ISO 15481Cross recessed pan head drilling screws with tapping screw thread(ISO 15481:1999) 十字槽盘头自钻自攻螺钉 GB/T 15856.1-2002 IDN EN ISO 15482Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999) 十字槽沉头自钻自攻螺钉 GB/T 15856.2-2002 IDN EN ISO 15483Cross recessed raised countersunk head drilling screws with tapping screw thread(ISO 15483:1999) 十字槽半沉头自钻自攻螺钉 GB/T 15856.3-2002 DIN EN ISO 10669Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A （ISO 10669:1999) 平垫圈 用于自攻螺钉和垫圈组合件 GB/T 97.5-2002 DIN EN ISO 10673Plain washers for screw and washer assemblies - Small,normal and large series - Product grade A (ISO 10673:1998) 平垫圈 用于螺钉和垫圈组合件 GB/T 97.4-2002 DIN EN ISO 2338DIN 7 Parallel pins,of unhardened steel and austenitic stainless steel(ISO 2338:1997) 圆柱销 不淬硬钢和奥氏体不锈钢 GB/T 119.1-2000 DIN EN ISO 8733 DIN 7979 Parallel pins whit internal thread,of unhardened steel and austenitic stainless steel(ISO 内螺纹圆柱销 不淬硬钢和奥GB/T 120.1-20008733:1997) 氏体不锈钢DIN EN ISO 8734 DIN 6325 Parallel pins,of hardened steel or martensiticstainless steel(Dowel pins)(ISO 8734:1997) 圆柱销淬硬钢和马氏体不锈钢GB/T 119.2-2000DIN EN ISO 8735 DIN 7979 Parallel pins with internal thread,of hardenedsteel and martensitic stainless steel(ISO8735:1997) 内螺纹圆柱销淬硬钢和马氏体不锈钢GB/T 120.2-2000DIN EN ISO 8748 DIN 7344 Spring-type straight pins,coiled,heavy duty (ISO8748:1997) 弹性圆柱销卷制重型GB/T 879.3-2000DIN EN ISO 8750 DIN 7343 Spring-type straight pins,coiled,standard duty(ISO 8750:1997) 弹性圆柱销卷制标准型GB/T 879.4-2000DIN EN ISO 8751 Spring-type straight pins,coiled,light duty （ISO8751:1997) 弹性圆柱销卷制轻型GB/T 879.5-2000DIN EN ISO 8752 DIN 1481 Spring-type straight pins,slotted,heavy duty (ISO8752:1997) 弹性圆柱销直槽重型GB/T 879.1-2000DIN EN ISO 13337 DIN 7346 Spring-type straight pins,slotted,light duty (ISO13337:1997) 弹性圆柱销直槽轻型GB/T 879.2-2000DIN EN ISO 1234 DIN 94 Split pins （ISO1234:1997) 开口销GB/T 91-2000 DIN EN ISO 7089 Plain washers-Normal series-Product grade A 平垫圈A级GB/T 97.1-2002DIN EN ISO 7090 Plain washers,chamfered-Normal series-Productgrade A(ISO 7090:2000) 平垫圈倒角型A级GB/T 97.2-2002DIN EN ISO 7091 Plain washers-Normal series-Product gradeC(ISO 7091:2000)平垫圈C级GB/T 95-2002DIN EN ISO 7092 Plain washers-Small series-Product grade A(ISO7092:2000)小垫圈A级GB/T 848-2002DIN EN ISO 7093-1 Plain washers-Large series-Part 1: Product gradeA(ISO 70931-1:2000)大垫圈A级GB/T 96.1-2002DIN EN ISO 7093-2 Plain washers-Normal series-Part 3: Productgrade C(ISO 70936-2:2000)大垫圈C级GB/T 96.2-2002DIN EN ISO 7094 Plain washers-Extra large series -Product gradeC(ISO 7094:2000)特大垫圈C级GB/T 5287-2002DIN EN ISO 7040 DIN 982| DIN6924 Prevailing torque type hexagon nuts (withnon-metallic insert),style 1 - Property classes 5,8and 10(ISO 7040:1997)1型非金属嵌件六角锁紧螺母GB/T 889.1-2000DIN EN ISO 7042 DIN 980| DIN6925 Prevailing torque type all-metal hexagonnuts,style 2 - Property classes 5,8, 10 and 12(ISO7042:1997)2型全金属六角锁紧螺母GB/T 6185.1-2000DIN EN ISO 7719 Prevailing torque type all-metal hexagonnuts,style 1- Property classes 5,8 and 10(ISO7719:1997) 1型全金属六角锁紧螺母GB/T 6184-2000DIN EN ISO 10511 DIN 985 Prevailing torque type hexagon thin nuts (withnon-metallic insert )(ISO 10511:1997) 非金属嵌件六角锁紧薄螺母GB/T 6072.2-2000DIN EN ISO 10512 DIN 982| DIN6924 Prevailing torque type hexagon nuts (withnon-metallic insert),style 1,with metric fine pitchthread-Property classes 6,8 and 10(ISO10512:1997)1型非金属嵌件六角锁紧螺母细牙GB/T 889.2-2000DIN EN ISO 10513 DIN 980| DIN6925 Prevailing torque type all-metal hexagonnuts,style 2,with metric fine pitch thread -Property classes 8,10 and 12(ISO 10513:1997)2型全金属六角。

螺栓螺母德标、欧标、国标对照表—— DIN EN ISO GB对照表之袁州冬雪创作新德标旧德标英文名中文名国标DIN EN ISO4014DIN 931-1Hexagon head bolts - Product grades Aand B(ISO 4014:1999)六角头螺栓GB/T 5782-2000DIN EN ISO4016DIN 601Hexagon head bolts - Product gradeC(ISO 4016:1999)六角头螺栓 C级GB/T 5780-2000DIN EN ISO4017DIN 933Hexagon head screws - Product grade Aand B (ISO 4017:1999)六角头螺栓全罗纹GB/T 5783-2000DIN EN ISO4018DIN 558Hexagon head screws - Product grade C(ISO 4018:1999)六角头螺栓全罗纹 C级GB/T 5781-2000DIN EN ISO8676DIN 961Hexagon head screws with metric finepitch thread - Product grade A and B(ISO8676:1999)六角头螺栓细牙全罗纹GB/T 5786-2000DIN EN ISO8765DIN 960Hexagon head bolts with fine pitchthread - Product grades A and B(ISO8765:1999)六角头螺栓细牙GB/T 5785-2000DIN EN ISO4032DIN 934Hexagon nuts,style 1-Product grades Aand B(ISO: 4032:1999)1型六角螺母GB/T 6170-2000DIN EN ISO4033Hexagon nuts,style 2-Product grades Aand B(ISO: 4033:1999)2型六角螺母GB/T 6175-2000DIN EN ISO4034DIN 555Hexagon nuts - Product grade C (ISO4034:1999)六角螺母 C级GB/T 41-2000DIN EN ISO4035DIN 439-2Hexagon thin nuts(chamfered)-Productgrade A and B (ISO 4035:1999)六角薄螺母DINEN ISO 4036DIN 439-1Hexagon thin nuts - Product gradeB(unchamfered)(ISO 4036:1999)六角薄螺母无倒角GB/T 6174-2000DIN EN ISO8673DIN 934|DIN 971-1Hexagon nuts,style 1,with metric finepitch thread - Product grades A and B(ISO 8673:1999)1型六角螺母细牙GB/T 6171-2000DIN EN ISO8674DIN 971-2Hexagon nuts,style 2,with metric finepitch thread - Product grades A and B(ISO 8674:1999)2型六角螺母细牙GB/T 6176-2000DIN EN ISO8675DIN 439-2Hexagon thin nuts with metric fine pitchthread - Product grades A and B (ISO8675:1999)六角薄螺母细牙GB/T 6173-2000DIN EN ISO4762DIN 912Hexagon socket head cap screws(ISO4762:1997)内六角圆柱头螺钉DIN EN ISO7380Hexagon socket button head sxrews (ISO7380:1997)内六角平圆头螺钉DIN EN ISO 10642DIN 7991H exagon socket countersunk headscrews (ISO 10642:1997)内六角沉头螺钉DIN EN ISO1207DIN 84Slotted cheese head screws-Productgrade A(ISO 1207:1992)开槽圆柱头螺钉GB/T 65-2000DIN EN ISO1580DIN 85Slotted pan head screws-Product gradeA(ISO 1580:1994)开槽盘头螺钉GB/T 67-2000DIN EN ISO2009DIN 963Slotted countersunk flat headscrews(common head style)(ISO2009:1994)开槽沉头螺钉GB/T 68-2000DIN EN ISO2010DIN 964Countersunk slotted raised headscrews(common head style)-Producegrade A(ISO 2010:1994)开槽半沉头螺钉GB/T 69-2000DIN EN ISO7045DIN 7985P an head screws with type H or type Zcross recess-Product grade A(ISO7054:1994)十字槽盘头螺钉GB/T 818-2000DIN EN ISO 7046-1DIN 965Countersunk flat head screws (common head style)with type H or type Z crossrecess,product grade A-Part 1:Steel ofproperty class 4.8(ISO 7046-1:1994)DIN EN ISO 7046-2DIN 965Cross recessed countersunk flat headscrews (common head style),productgrade A-Part2:Steel of property class8.8,stainless steel and nonferousmetals(ISO 7046-2:1990)十字槽沉头螺钉第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3DIN EN ISO7047DIN 966Countersunk raised head screws(common head style) with type H ortype Z cross recess-Product grade A(ISO7047:1994)十字槽半沉头螺钉GB/T 820-2000DIN EN ISO7048Cross recessed cheese head screws (ISO7048:1998)十字槽圆柱头螺钉GB/T 822-2000DIN EN ISO 10644Screw and washer assemblies with plainwashers-Washer hardness classes200HV and 300HV(ISO 10644:1998)螺栓或螺钉和平垫圈组合件DIN EN ISO 10510Tapping screw and washer assemblieswith plain washers(ISO 10510l:1999)自攻螺钉和平垫圈组合件IDN EN ISO 15480Hexagon washer head drilling screwswith tapping screws thread (ISO15480:1999)六角凸缘自钻自攻螺钉IDN EN ISO 15481Cross recessed pan head drilling screwswith tapping screw thread(ISO15481:1999)十字槽盘头自钻自攻螺钉IDN EN ISO 15482Cross recessed countersunk head drillingscrews with tapping screw thread (ISO15482:1999)十字槽沉头自钻自攻螺钉IDN EN ISO 15483Cross recessed raised countersunk headdrilling screws with tapping screwthread(ISO 15483:1999)十字槽半沉头自钻自攻螺钉DIN EN ISO 10669Plain washers for tapping screw andwasher assemblies - Normal and largeseries - Product grade A （ISO平垫圈用于自攻螺钉和垫圈组合件10669:1999)DIN EN ISO 10673Plain washers for screw and washerassemblies - Small,normal and largeseries - Product grade A (ISO10673:1998)平垫圈用于螺钉和垫圈组合件DIN EN ISO2338DIN 7Parallel pins,of unhardened steel andaustenitic stainless steel(ISO 2338:1997)圆柱销不淬硬钢和奥氏体不锈钢DIN EN ISO8733DIN 7979P arallel pins whit internal thread,ofunhardened steel and austeniticstainless steel(ISO 8733:1997)内罗纹圆柱销不淬硬钢和奥氏体不锈钢DIN EN ISO8734DIN 6325P arallel pins,of hardened steel ormartensitic stainless steel(Dowelpins)(ISO 8734:1997)圆柱销淬硬钢和马氏体不锈钢DIN EN ISO8735DIN 7979P arallel pins with internal thread,ofhardened steel and martensitic stainlesssteel(ISO 8735:1997)内罗纹圆柱销淬硬钢和马氏体不锈钢DIN EN ISO8748DIN 7344S pring-type straight pins,coiled,heavyduty (ISO 8748:1997)弹性圆柱销卷制重型DIN EN ISO8750DIN 7343S pring-type straight pins,coiled,standardduty (ISO 8750:1997)弹性圆柱销卷制尺度型DIN EN ISO8751Spring-type straight pins,coiled,lightduty （ISO 8751:1997)弹性圆柱销卷制轻型DIN EN ISO8752DIN 1481S pring-type straight pins,slotted,heavyduty (ISO 8752:1997)弹性圆柱销直槽重型DIN EN ISO 13337DIN 7346S pring-type straight pins,slotted,lightduty (ISO 13337:1997)弹性圆柱销直槽轻型DIN EN ISO1234DIN 94Split pins （ISO1234:1997)启齿销GB/T 91-2000DIN EN ISO7089Plain washers-Normal series-Productgrade A平垫圈 A级DIN EN ISO7090Plain washers,chamfered-Normal series-Product grade A(ISO 7090:2000)平垫圈倒角型 A级DIN EN ISO7091Plain washers-Normal series-Productgrade C(ISO 7091:2000)平垫圈 C级GB/T 95-2002DIN EN ISO7092Plain washers-Small series-Productgrade A(ISO 7092:2000)小垫圈 A级GB/T 848-2002DIN EN ISO 7093-1Plain washers-Large series-Part 1:Product grade A(ISO 70931-1:2000)大垫圈 A级DIN EN ISO 7093-2Plain washers-Normal series-Part 3:Product grade C(ISO 70936-2:2000)大垫圈 C级DIN EN ISO7094Plain washers-Extra large series -Productgrade C(ISO 7094:2000)特大垫圈 C级GB/T 5287-2002DIN EN ISO7040DIN 982|DIN 6924Prevailing torque type hexagon nuts(with non-metallic insert),style 1 -1型非金属嵌件六角锁紧Property classes 5,8 and 10(ISO7040:1997)螺母DIN EN ISO7042DIN 980|DIN 6925Prevailing torque type all-metal hexagonnuts,style 2 - Property classes 5,8, 10and 12(ISO 7042:1997)2型全金属六角锁紧螺母DIN EN ISO7719Prevailing torque type all-metal hexagonnuts,style 1- Property classes 5,8 and10(ISO 7719:1997)1型全金属六角锁紧螺母GB/T 6184-2000DIN EN ISO 10511DIN 985Prevailing torque type hexagon thin nuts(with non-metallic insert )(ISO10511:1997)非金属嵌件六角锁紧薄螺母DIN EN ISO 10512DIN 982|DIN 6924Prevailing torque type hexagon nuts(with non-metallic insert),style 1,withmetric fine pitch thread-Property classes6,8 and 10(ISO 10512:1997)1型非金属嵌件六角锁紧螺母细牙DIN EN ISO 10513DIN 980|DIN 6925Prevailing torque type all-metal hexagonnuts,style 2,with metric fine pitchthread - Property classes 8,10 and12(ISO 10513:1997)2型全金属六角锁紧螺母细牙。

德国标准和国际标准、中国标准中英文对照表序号德国标准中文品名英文品名国际标准中国标准Description inItem D IN-StandardDescription in English ISO-Standard GB-Standard Chinese1 DIN1 圆锥销taper pins ISO2339 GB1172 DIN7 圆柱销parallel pins ISO2338 GB119-863 DIN84 开槽圆柱头螺钉slotted cheese head screws ISO1207 GB65-854 DIN85 开槽盘头螺钉slotted pan head screws ISO1580 GB67-855 DIN93 单耳止动垫圈tab washers GB8546 DIN94 开口销split cotter pins ISO1234 GB91slotted raised csk head wood7 DIN95 开槽半沉头木螺钉GB101screws8 DIN96 开槽半圆头木螺钉slotted round head wood screws GB99slotted countersunk head wood9 DIN97 开槽沉头木螺钉GB100screws10 DIN125-A 平垫plain washers ISO7089 GB97.1-8511 DIN125-B 平垫(带倒角) mediun washers ISO7090 GB97.2-8512 DIN126 平垫plain washers ISO709113 DIN127-A 重型弹垫spring lock washers,tang ends GB724414 DIN127-B 标准弹垫spring lock washers,square ends GB93-8715 DIN128-A 鞍形弹垫single coil spring lock washers GB7245-8716 DIN137-A 弹簧止动垫圈curved spring washers17 DIN137-B 波形弹垫wave spring washers GB95518 DIN186 T型方颈螺栓T-head bolts with square neck GB 37-8819 DIN188 T型双接头螺栓T-head bolts with double nip20 DIN258 螺纹圆锥销taper pins with threaded end ISO873721 DIN261 T型头螺栓T-head bolts22 DIN315AF 蝶型螺母(美制) wing nuts amercia form23 DIN315DF 蝶型螺母(德制) wing nuts germany form GB62-8824 DIN316AF 蝶型螺钉(美制) wing screws amercia form25 DIN317DF 蝶型螺钉(德制) wing screws germany form26 DIN319 圆球型盖型螺母ball knobs27 DIN404开槽带孔球面圆柱头螺钉slotted capstan screws GB832-8828 DIN417开槽长圆柱端紧定螺钉slotted set srews with full dogpointISO7435 GB75-8529 DIN427开槽平端紧定螺钉(半牙) slotted set srews with chamferedendISO2342 GB73-8530 DIN431小六角特薄细牙螺母pipe nuts with thread GB808-8831 DIN432 外舌止动垫圈external tap GB856-8832 DIN433小垫圈(用于圆柱头螺钉)washers for cheese head screws ISO7092 GB848-95 33 DIN434 方斜垫圈(U型)square taper washers forU-sectionGB852-88 34 DIN435 方斜垫圈(I型)square taper washers forI-sectionsGB852-8835 DIN436 方垫圈square washers36 DIN438 开槽凹端紧定螺钉slotted set with cup point ISO7436 GB74-8537 DIN439 六角薄螺母hexagon thin nuts ISO4035 GB6172-8638 DIN439 细牙六角薄螺母hexagon thin nuts ISO8675 GB6173-8639 DIN440 木螺钉专用垫圈rounds washers for woodconstructionsISO709440 DIN443 密封帽sealing caps,push-in type41 DIN444 活节螺栓B 型eye bolts form B GB798-8842 DIN462 内舌止动垫圈internal tab washers43 DIN463 双耳止动垫圈washers with two taps GB855-8844 DIN464 滚花高头螺钉knurled thumb screws withcollarGB834-88 45 DIN465 开槽滚花高头螺钉slotted knurled thumb screwswith collar46 DIN466 滚花高螺母knurled thumb nuts with collar GB806-8847 DIN467 滚花薄螺母knurled thumb thin nuts GB807-8848 DIN470 锁紧垫圈sealing washers49 DIN471 轴用弹性挡圈retaining rings forshafts(external),circlipsGB894.1-86 50 DIN472 孔用弹性挡圈retaining rings forbores(internal),circlipsGB893.1-8651 DIN478 方头带垫螺栓square head bolts with collar52 DIN479 方头圆柱底端螺栓square head bolts with half dogpoint53 DIN480方头带垫半圆底端螺栓square head bolts with collar,half dog point and rounded end54 DIN508 T型槽螺母T-slot nuts ISO29955 DIN525 单头螺柱single end studs56 DIN529 地脚螺栓masonry bolts GB799-8857 DIN546 带槽圆螺母slotted round nuts GB817-7658 DIN547 端面带孔圆螺母round nuts with drilled holes inone faceGB815-8859 DIN551 开槽平端紧定螺钉slotted sit screws with flat point I SO4776 GB73-8560 DIN553 开槽锥端紧定螺钉slotted set screws with conepointISO7434 GB71-8561 DIN555 六角螺母hexagon nuts ISO403462 DIN557 方螺母-C square nuts GB39-8863 DIN558 六角头螺钉hexagon screws ISO401864 DIN561六角头圆柱端紧定螺钉hexagon set screws with full dog point65 DIN562 薄型方螺母-Bsquare nuts withoutbevel(pressed nuts)66 DIN571 六角头木螺钉hexagon head wood screws(coach screws)GB102-8667 DIN580 吊环螺钉lifting eye bolts ISO3266 GB825-7668 DIN582 吊环螺母lifting eye nuts69 DIN601 六角头螺栓hexagon bolts ISO401670 DIN603大半圆头方颈螺栓(马车螺栓) mushroom head square neckbolts (carriage bolts)ISO8677 GB14-8871 DIN604沉头带插销马车螺栓flat countersunk nib bolts72 DIN605沉头长方颈马车螺栓flat countersunk long square neck bolts73 DIN607半圆头带插销马车螺栓cup head nib bolts74 DIN608沉头短方颈马车螺栓flat countersunk short square neck bolts75 DIN609六角头精配螺栓（长螺纹）hexagon fitted bolts,long thread76 DIN610六角头精配螺栓（短螺纹）hexagon fitted bolts,short thread77 DIN653 滚花平头螺钉knurled thumb screws thin type GB835-8878 DIN660 半圆头铆钉round head rivets ISO1051 GB867-8679 DIN661 沉头铆钉contersunk head rivets ISO1051 GB869-8680 DIN662 半沉头铆钉raised contersunk head rivets ISO105181 DIN674 大扁头铆钉mushroom head rivets ISO105182 DIN703重型侧面带孔圆螺母adjusting rings,heavy range (shafting collars)83 DIN705 侧面带孔圆螺母adjusting rings,light range(shafting collars)GB816-8884 DIN741 卡头wire rope clips85 DIN787 T型槽螺钉T-slot screws ISO29986 DIN835双头螺柱（牙长=2D）studs-metal (end=2d) GB900-8887 DIN906内六角锥型闭锁螺钉hexagon socket pipe plugs,conical thread88 DIN908内六角直型闭锁螺钉hexagon socket screw plugs,cyl. thread89 DIN909外六角锥型闭锁螺钉hexagon head pipe plugs,conical thread90 DIN910外六角直型闭锁螺钉hexagon head screw plugs,cyl.thread91 DIN911 内六角扳手socket wrenches ISO293692 DIN912 内六角圆柱头螺钉hexagon socket cap screws ISO4762 GB70-8593 DIN913内六角平端紧定螺钉hexagon socket set screws withflat pointISO4026 GB77-8594 DIN914内六角尖端紧定螺钉hexagon socket set screws withcone pointISO4027 GB78-8595 DIN915内六角圆柱端紧定螺钉hexagon socket set screws withdog pointISO4028 GB79-8596 DIN916 内六角凹端紧定螺hexagon socket set screws with ISO4029 GB80-85钉cup point97 DIN917 薄型盲螺母hexagon cap nuts98 DIN920 开槽小圆柱头螺钉slotted short cheese head screws99 DIN921 开槽大圆柱头螺钉slotted large cheese head screws GB838-88100 DIN923开槽圆柱头轴肩螺钉slotted pan head screws withshoulderGB830-88101 DIN927 开槽无头轴肩螺钉slotted shoulder screws102 DIN928 焊接方螺母square weld nuts GB/T13680-92 103 DIN929 焊接六角螺母hexagon weld nuts GB/T13681-92 104 DIN931 六角头螺栓（半牙）hexagon head screws ISO4014 GB5782-86 105 DIN933 六角头螺栓（全牙）hexagon head screws ISO4017 GB5783-86 106 DIN934 六角头螺母(1型) hexagon full nuts ISO4032 GB6170-86 107 DIN934细牙六角头螺母(1型)hexagon full nuts ISO8673 GB6171-86 108 DIN935 开槽六角螺母hexagon slotted and castle nuts ISO7035 GB6178-86 109 DIN936 六角头薄螺母hexagon thin nuts ISO4035 GB6172.1-86 110 DIN937 六角头开槽薄螺母hexagon thin slotted and castlenutsISO7038 GB6181-86 111 DIN938双头螺距（牙长=1D）studs metal (end=1d) GB897-88 112 DIN939双头螺距（牙长=1.25D）studs metal (end=1.25d) GB898-88 113 DIN940双头螺距（牙长=1.5D）studs metal (end=1.5d)114 DIN960六角头细牙螺栓（半牙）hexagon head bolts,metric finepitch threadISO8765 GB5785-86115 DIN961六角头细牙螺栓（全牙）hexagon head bolts,metric finepitch threadISO8676 GB5786-86116 DIN962头部穿孔六角头螺栓additional shapes and versions for bolts117 DIN963 开槽沉头螺钉slotted countersund head screws ISO 2009 GB68-85 118 DIN964 开槽半沉头螺钉slotted raised countersunk ovalhead screwsISO 2010 GB69-85 119 DIN965 十字槽沉头螺钉cross recessed countersunk headscrewsISO7046 GB819-85 120 DIN966 十字槽半沉头螺钉cross recessed raisedcountersunk head screwsISO7047 GB820-85 121 DIN970 六角头螺母hexagon nuts type-1122 DIN971 六角头螺母hexagon nuts type-2123 DIN972细牙六角头螺母(2型)hexagon nuts with fine thread ISO8674 GB6176-86 124 DIN975 牙条(全螺纹) threaded rods(studdings) GB15389-94 125 DIN976 螺纹销threaded pins(stud bolts)126 DIN979六角头开槽薄螺母（2型）hexagon thin slotted and castle nuts127 DIN980全金属六角锁紧螺母（1型）prevailling torque type hexagonnuts,all metall nutsISO7199 GB6184-86128 DIN981 圆螺母locknuts ISO2982 GB812-88129 DIN982六角头尼龙锁紧螺母prevailling torque type hexagonnuts,heavy type ,with nyloninsertISO7040 GB889.1-86130 DIN985六角头薄型尼龙锁紧螺母prevailling torque type hexagonnuts,heavy type ,with nyloninsertISO10511 GB6172.2-86131 DIN986六角盖型尼龙锁紧螺母prevailling torque typedomed capnuts with nylon insert132 DIN988 配合垫片shim rings133 DIN1052 木材连接用垫片washers for timber connectors134 DIN1151 沉头钢钉round plain head nails135 DIN1440 销钉专用垫片A型plain washers for clevis pins(A型)ISO8738136 DIN1441 销钉专用垫片plain washers for clevis pins137 DIN1444 带头销钉clevis pins with head ISO2341138 DIN1471 圆锥型槽销grooved pins,taper grooved ISO8744 GB/T13829.2 139 DIN1472 圆锥型槽销(半槽)grooved pins,taper grooved halflengthISO8745 GB/T13829.2 140 DIN1473 平行槽销(带倒角)grooved pins,parallel groovedfull lengthISO8740141 DIN1474 前端凹槽槽销grooved pins,reserve groovedhalf lengthISO8741142 DIN1475 中部凹槽槽销grooved pins,centre grooved ISO8742143 DIN1476 圆头槽销grooved pins with round head ISO8746 GB/T13829.3 144 DIN1477 沉头槽销grooved pins with countersunkheadISO8747145 DIN1479 六角螺母棒turnuckles(centre parts),madeout of hexagon bar146 DIN1480 花篮螺栓turnuckles with eye bolt andhook bolt147 DIN1481 弹性圆柱销spring pins,heavy type ISO8752 GB879-86 148 DIN1587 组合式盖型螺母hexagon domed cap nuts GB802-88149 DIN1804开槽圆螺母（配合沟头扳手）slotted round nuts for hook spanner150 DIN1816 圆螺母（带插销孔）round nuts with set holes 151 DIN2093 盘型弹簧垫圈disc springs152 DIN3017 喉箍hose clamps153 DIN3404 润滑油嘴（旋扭头）lubricating nipples,button head154 DIN3567 管夹shackles for conduilts155 DIN3570 U型螺栓stirrup bolts(U-bolts)156 DIN6319 球面垫圈spherical washers,conical seats GB849-88 157 DIN6325 圆柱销parallel pins ISO8734158 DIN6330 厚六角螺母hexagon nuts ,1.5d GB56-88 159 DIN6331 厚六角法兰面螺母hexagon nuts ,1.5d with collar GB6177-86 160 DIN6334 长六角螺母hexagon nuts ,3d161 DIN6797-A 外齿锁紧垫圈external teeth lock washers GB862.1-87 162 DIN6797-I 内齿锁紧垫圈internal teeth lock washers GB861.1-87 163 DIN6798-A 外锯齿锁紧垫圈external teeth serrated lockwashersGB862.2-87 164 DIN6798-I 内锯齿锁紧垫圈internal teeth serrated lockwashersGB861.2-87 165 DIN6799 开口挡圈retaining rings forshafts(E-rings),circlipsGB896-76 166 DIN6885 平键（A型）parallel keys(form A ) ISO773/2491167 DIN6888 半圆键woodruff keys ISO3912168 DIN6899 嵌环（支撑环）thimbles169 DIN6900机器螺钉和垫圈组合件screws and washers assemblies GB9074.1-.17170 DIN6901自攻螺钉和垫圈组合件tapping screws and washersassembliesGB9074.18-.23171 DIN6912薄型带孔内六角圆柱头螺钉hexagon socket head cap screws with hole,low head172 DIN6914 大六角头螺栓hexagon head bolts with largehead(friction grip bolts)173 DIN6915 大六角螺母hexagon nuts with large widethacross flat(friction grip nuts)174 DIN6916 大垫圈round washers for friction gripbolts175 DIN6917 楔型方垫圈spuare taper washers for frictiongrip bolts on T-sections176 DIN6923 六角法兰面螺母hexagon flange nuts ISO4161 GB6177-86177 DIN6925全金属六角锁紧螺母(2型）prevailing torque type hexagonnuts,all metallic nutsISO7042 GB6185.1-2000178 DIN7337开口型抽芯铆钉（沉头、扁圆头）blind rivets GB12617/12618 179 DIN7338扁平头半空心/全空心铆钉rivets for brake and clutch lining GB875/975-86 180 DIN7343 螺旋夹紧销spiral pins ISO8750181 DIN7346 轻型弹性圆柱销spring pins,light type ISO13337182 DIN7349重型弹性圆柱销用垫圈washers for bolts with heavy type spring pinss183 DIN7500ISO公制螺纹螺钉(多种头型) threadforming screws for ISO-metric thread184 DIN7504自攻自钻螺钉(多种头型)self-drilling tapping screws 185 DIN7513开槽切削螺纹螺钉(多种头型)thread cutting screws186 DIN7516十字槽切削螺纹螺钉(多种头型) thread cutting screws cross recess187 DIN7965 T型四爪螺母tee nuts with pronge188 DIN7968钢结构用六角头螺栓连接副hexagon head fitted bolts forsteel structuresGB1228/1229/1230189 DIN7971 开槽盘头自攻螺钉pan head tapping screws withslotISO1481 GB5282-85 190 DIN7972 开槽沉头自攻螺钉countersunk flat head tappingscrews with slotISO1482 GB5283-85191 DIN7973开槽半沉头自攻螺钉raised countersunk oval headtapping screws with slotISO1483 GB5284-85192 DIN7976 六角头自攻螺钉hexagon tapping screws ISO1479 GB5285-85193 DIN7980圆柱头螺钉用弹簧垫圈spring lock washers for screwswith cylindrical headsISO8738194 DIN7981十字槽盘头自攻螺钉pan head tapping screws withcross recessedISO 7049 GB845-85195 DIN7982十字槽沉头自攻螺钉countersunk flat head tappingscrews with cross recessedISO7050 GB846-85196 DIN7983十字槽半沉头自攻螺钉raised countersunk oval headtapping screws with crossrecessedISO7051 GB847-86197 DIN7984薄型内六角圆柱头螺钉hexagon socket head cap screws with，reduced head198 DIN7985 十字槽盘头螺钉pan head screws with crossrecessedISO7045 GB818-85 199 DIN7989 钢结构用垫圈washers for steel structures GB1230-84200 DIN7990钢结构用六角头螺栓hexagon head bolts for steelstructuresGB1229-84201 DIN7991 内六角沉头螺钉hexagon socket countersunkhead screwsISO10642202 DIN7993 轴用钢丝挡圈roundwire snap rings for shafts GB895.2-86203 DIN7995十字槽半沉头木螺钉cross recessed raisedcountersunk head wood screwsGB952-86204 DIN7996 十字槽圆头木螺钉cross recessed round head woodscrewsGB950-86 205 DIN7997 十字槽沉头木螺钉cross recessed countersunk headwood screwsGB951-86206 DIN8140螺纹护套（普通\自锁等）ciol inserts,coarse,fine thread,silf locking207 DIN9021 大外径垫圈washers,outside diameterappro.3dISO7093 GB96-85 208 DIN11024 弹簧卡子spring cotter for a bolt209 DIN13257 平板螺栓belting bolts (elevator bolts)210 DIN18182 干壁钉（墙板钉）dry wall screws211 DIN28129 环型螺母lifting nuts(eye nuts) GB63-88 212 DIN70952 圆螺母用止退垫圈tab washers for slotted roundnutsGB858-88。

德标、欧标、国际、国标对照表—— DIN EN ISO GB 对照表新德标旧德标 英文名 中文名 国标 DIN EN ISO 4014 DIN 931-1 Hexagon head bolts - Product grades A and B(ISO 4014:1999) 六角头螺栓 GB/T 5782-2000 DIN EN ISO 4016DIN 601 Hexagon head bolts - Product grade C(ISO 4016:1999) 六角头螺栓 C 级 GB/T 5780-2000 DIN EN ISO 4017DIN 933 Hexagon head screws - Product grade A and B (ISO 4017:1999) 六角头螺栓 全螺纹 GB/T 5783-2000 DIN EN ISO 4018DIN 558 Hexagon head screws - Product grade C (ISO 4018:1999) 六角头螺栓 全螺纹 C 级 GB/T 5781-2000 DIN EN ISO 8676DIN 961 Hexagon head screws with metric fine pitch thread - Product grade A and B(ISO 8676:1999) 六角头螺栓 细牙 全螺纹 GB/T 5786-2000 DIN EN ISO 8765DIN 960 Hexagon head bolts with fine pitch thread - Product grades A and B(ISO 8765:1999) 六角头螺栓 细牙 GB/T 5785-2000 DIN EN ISO 4032DIN 934 Hexagon nuts,style 1-Product grades A and B(ISO: 4032:1999) 1型六角螺母 GB/T 6170-2000 DIN EN ISO 4033Hexagon nuts,style 2-Product grades A and B(ISO: 4033:1999) 2型六角螺母 GB/T 6175-2000 DIN EN ISO 4034DIN 555 Hexagon nuts - Product grade C (ISO 4034:1999) 六角螺母 C 级 GB/T 41-2000 DIN EN ISO 4035DIN 439-2 Hexagon thin nuts(chamfered)-Product grade A and B (ISO 4035:1999) 六角薄螺母 GB/T 6172.1-2000 DIN EN ISO 4036DIN 439-1 Hexagon thin nuts - Product grade B(unchamfered)(ISO 4036:1999) 六角薄螺母 无倒角 GB/T 6174-2000 DIN EN ISO 8673DIN 934| DIN 971-1 Hexagon nuts,style 1,with metric fine pitch thread - Product grades A and B (ISO 8673:1999) 1型六角螺母 细牙 GB/T 6171-2000 DIN EN ISO 8674DIN 971-2 Hexagon nuts,style 2,with metric fine pitch thread - Product grades A and B (ISO 8674:1999) 2型六角螺母 细牙 GB/T 6176-2000 DIN EN ISO 8675DIN 439-2 Hexagon thin nuts with metric fine pitch thread - Product grades A and B (ISO 8675:1999) 六角薄螺母 细牙 GB/T 6173-2000 DIN EN ISO 4762DIN 912 Hexagon socket head cap screws(ISO 4762:1997) 内六角圆柱头螺钉 GB/T 70.1-2000 DIN EN ISO 7380Hexagon socket button head sxrews (ISO 7380:1997) 内六角平圆头螺钉 GB/T 70.2-2000 DIN EN ISO 10642DIN 7991 Hexagon socket countersunk head screws (ISO 10642:1997) 内六角沉头螺钉 GB/T 70.3-2000 DIN EN ISO 1207DIN 84 Slotted cheese head screws-Product grade A(ISO 1207:1992) 开槽圆柱头螺钉 GB/T 65-2000 DIN EN ISO 1580 DIN 85 Slotted pan head screws-Product grade A(ISO 1580:1994) 开槽盘头螺钉GB/T 67-2000DIN EN ISO 2009 DIN 963 Slotted countersunk flat head screws(common head style)(ISO 2009:1994)开槽沉头螺钉GB/T 68-2000DIN EN ISO 2010 DIN 964 Countersunk slotted raised head screws(common head style)-Produce grade A(ISO 2010:1994)开槽半沉头螺钉GB/T 69-2000DIN EN ISO 7045 DIN 7985 Pan head screws with type H or type Z cross recess-Product grade A(ISO 7054:1994)十字槽盘头螺钉GB/T 818-2000DIN EN ISO 7046-1 DIN 965Countersunk flat head screws (common head style)with type H or type Z cross recess,product grade A-Part 1:Steel of property class 4.8(ISO 7046-1:1994) 十字槽盘头螺钉 第1部分：钢4.8级 GB/T 819.1-2000 DIN EN ISO 7046-2DIN 965 Cross recessed countersunk flat head screws (common head style),product grade A-Part2:Steel of property class 8.8,stainless steel and nonferous metals(ISO 7046-2:1990) 十字槽沉头螺钉 第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3 GB/T 819.2-1997 DIN EN ISO 7047DIN 966 Countersunk raised head screws (common head style) with type H or type Z cross recess-Product grade A(ISO 7047:1994) 十字槽半沉头螺钉 GB/T 820-2000 DIN EN ISO 7048Cross recessed cheese head screws (ISO 7048:1998) 十字槽圆柱头螺钉 GB/T 822-2000 DIN EN ISO 10644Screw and washer assemblies with plain washers-Washer hardness classes 200HV and 300HV(ISO 10644:1998) 螺栓或螺钉和平垫圈组合件 GB/T 9074.1-2002 DIN EN ISO 10510Tapping screw and washer assemblies with plain washers(ISO 10510l:1999) 自攻螺钉和平垫圈组合件 GB/T 9074.18-2002 IDN EN ISO 15480Hexagon washer head drilling screws with tapping screws thread (ISO 15480:1999) 六角凸缘自钻自攻螺钉 GB/T 15856.5-2002 IDN EN ISO 15481Cross recessed pan head drilling screws with tapping screw thread(ISO 15481:1999) 十字槽盘头自钻自攻螺钉 GB/T 15856.1-2002 IDN EN ISO 15482Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999) 十字槽沉头自钻自攻螺钉 GB/T 15856.2-2002 IDN EN ISO 15483Cross recessed raised countersunk head drilling screws with tapping screw thread(ISO 15483:1999) 十字槽半沉头自钻自攻螺钉 GB/T 15856.3-2002 DIN EN ISO 10669 Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A （ISO 10669:1999) 平垫圈 用于自攻螺钉和垫圈组合件GB/T 97.5-2002DIN EN ISO 10673Plain washers for screw and washer assemblies - Small,normal and large series - Product grade A (ISO 10673:1998) 平垫圈 用于螺钉和垫圈组合件 GB/T 97.4-2002 DIN EN ISO 2338DIN 7 Parallel pins,of unhardened steel and austenitic stainless steel(ISO 2338:1997) 圆柱销 不淬硬钢和奥氏体不锈钢 GB/T 119.1-2000 DIN EN ISO 8733DIN 7979 Parallel pins whit internal thread,of unhardened steel and austenitic stainless steel(ISO 8733:1997) 内螺纹圆柱销 不淬硬钢和奥氏体不锈钢 GB/T 120.1-2000 DIN EN ISO 8734DIN 6325 Parallel pins,of hardened steel or martensitic stainless steel(Dowel pins)(ISO 8734:1997) 圆柱销 淬硬钢和马氏体不锈钢 GB/T 119.2-2000 DIN EN ISO 8735DIN 7979 Parallel pins with internal thread,of hardened steel and martensitic stainless steel(ISO 8735:1997) 内螺纹圆柱销 淬硬钢和马氏体不锈钢 GB/T 120.2-2000 DIN EN ISO 8748DIN 7344 Spring-type straight pins,coiled,heavy duty (ISO 8748:1997) 弹性圆柱销 卷制 重型 GB/T 879.3-2000 DIN EN ISO 8750DIN 7343 Spring-type straight pins,coiled,standard duty (ISO 8750:1997) 弹性圆柱销 卷制 标准型 GB/T 879.4-2000 DIN EN ISO 8751Spring-type straight pins,coiled,light duty （ISO 8751:1997) 弹性圆柱销 卷制 轻型 GB/T 879.5-2000 DIN EN ISO 8752DIN 1481 Spring-type straight pins,slotted,heavy duty (ISO 8752:1997) 弹性圆柱销 直槽 重型 GB/T 879.1-2000 DIN EN ISO 13337DIN 7346 Spring-type straight pins,slotted,light duty (ISO 13337:1997) 弹性圆柱销 直槽 轻型 GB/T 879.2-2000 DIN EN ISO 1234DIN 94 Split pins （ISO1234:1997) 开口销 GB/T 91-2000 DIN EN ISO 7089Plain washers-Normal series-Product grade A 平垫圈 A 级 GB/T 97.1-2002 DIN EN ISO 7090Plain washers,chamfered-Normal series-Product grade A(ISO 7090:2000) 平垫圈 倒角型 A 级 GB/T 97.2-2002 DIN EN ISO 7091Plain washers-Normal series-Product grade C(ISO 7091:2000) 平垫圈 C 级 GB/T 95-2002 DIN EN ISO 7092Plain washers-Small series-Product grade A(ISO 7092:2000) 小垫圈 A 级 GB/T 848-2002 DIN EN ISO 7093-1Plain washers-Large series-Part 1: Product grade A(ISO 70931-1:2000) 大垫圈 A 级 GB/T 96.1-2002 DIN EN ISO 7093-2Plain washers-Normal series-Part 3: Product grade C(ISO 70936-2:2000) 大垫圈 C 级 GB/T 96.2-2002 DIN EN ISO 7094 Plain washers-Extra large series -Product grade C(ISO 7094:2000) 特大垫圈 C 级GB/T 5287-2002DIN EN ISO 7040 DIN 982|DIN 6924 Prevailing torque type hexagon nuts (with non-metallic insert),style 1 - Property classes 5,8 and 10(ISO 7040:1997)1型非金属嵌件六角锁紧螺母GB/T 889.1-2000 DIN EN ISO 7042 DIN 980| DIN 6925 Prevailing torque type all-metalhexagon nuts,style 2 - Propertyclasses 5,8, 10 and 12(ISO7042:1997)2型全金属六角锁紧螺母 GB/T 6185.1-2000 DIN EN ISO 7719 Prevailing torque type all-metalhexagon nuts,style 1- Propertyclasses 5,8 and 10(ISO 7719:1997) 1型全金属六角锁紧螺母GB/T 6184-2000 DIN EN ISO 10511 DIN 985 Prevailing torque type hexagon thin nuts (with non-metallic insert )(ISO 10511:1997) 非金属嵌件六角锁紧薄螺母 GB/T 6072.2-2000DIN EN ISO 10512 DIN 982|DIN 6924Prevailing torque type hexagon nuts (with non-metallic insert),style 1,with metric fine pitch thread-Property classes 6,8 and 10(ISO 10512:1997) 1型非金属嵌件六角锁紧螺母 细牙 GB/T 889.2-2000 DIN EN ISO 10513 DIN 980|DIN 6925 Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread - Property classes 8,10 and 12(ISO 10513:1997) 2型全金属六角锁紧螺母 细牙GB/T 6185.2-2000（注：文件素材和资料部分来自网络，供参考。

德标和国标,国际标准中英文对照表序号德国标准中文品名英文品名国际标准中国标准Item DIN-Standard Description in Chinese Description in English ISO-Standard GB-Standard1 DIN1 圆锥销taper pins ISO2339 GB1172 DIN7 圆柱销parallel pins ISO2338 GB119-863 DIN84 开槽圆柱头螺钉slotted cheese head screws ISO1207 GB65-854 DIN85 开槽盘头螺钉slotted pan head screws ISO1580 GB67-855 DIN93 单耳止动垫圈tab washers GB8546 DIN94 开口销split cotter pins ISO1234 GB917 DIN95 开槽半沉头木螺钉slotted raised csk head wood screws GB1018 DIN96 开槽半圆头木螺钉slotted round head wood screws GB999 DIN97 开槽沉头木螺钉slotted countersunk head wood screws GB10010 DIN125-A 平垫plain washers ISO7089 GB97.1-8511 DIN125-B 平垫(带倒角) mediun washers ISO7090 GB97.2-8512 DIN126 平垫plain washers ISO709113 DIN127-A 重型弹垫spring lock washers,tang ends GB724414 DIN127-B 标准弹垫spring lock washers,square ends GB93-8715 DIN128-A 鞍形弹垫single coil spring lock washers GB7245-8716 DIN137-A 弹簧止动垫圈curved spring washers17 DIN137-B 波形弹垫wave spring washers GB95518 DIN186 T型方颈螺栓T-head bolts with square neck GB37-8819 DIN188 T型双接头螺栓T-head bolts with double nip20 DIN258 螺纹圆锥销taper pins with threaded end ISO873721 DIN261 T型头螺栓T-head bolts22 DIN315AF 蝶型螺母(美制) wing nuts amercia form23 DIN315DF 蝶型螺母(德制) wing nuts germany form GB62-8824 DIN316AF 蝶型螺钉(美制) wing screws amercia form25 DIN317DF 蝶型螺钉(德制) wing screws germany form26 DIN319 圆球型盖型螺母ball knobs27 DIN404 开槽带孔球面圆柱头螺钉slotted capstan screws GB832-8828 DIN417 开槽长圆柱端紧定螺钉slotted set srews with full dog point ISO7435 GB75-8529 DIN427 开槽平端紧定螺钉(半牙) slotted set srews with chamfered end ISO2342 GB73-8530 DIN431 小六角特薄细牙螺母pipe nuts with thread GB808-8831 DIN432 外舌止动垫圈external tap GB856-8832 DIN433 小垫圈(用于圆柱头螺钉) washers for cheese head screws ISO7092 GB848-9533 DIN434 方斜垫圈(U型) square taper washers for U-section GB852-8834 DIN435 方斜垫圈(I型) square taper washers for I-sections GB852-8835 DIN436 方垫圈square washers36 DIN438 开槽凹端紧定螺钉slotted set with cup point ISO7436 GB74-8537 DIN439 六角薄螺母hexagon thin nuts ISO4035 GB6172-8638 DIN439 细牙六角薄螺母hexagon thin nuts ISO8675 GB6173-8639 DIN440 木螺钉专用垫圈rounds washers for wood constructions ISO709440 DIN443 密封帽sealing caps,push-in type41 DIN444 活节螺栓B 型eye bolts form B GB798-8842 DIN462 内舌止动垫圈internal tab washers43 DIN463 双耳止动垫圈washers with two taps GB855-8844 DIN464 滚花高头螺钉knurled thumb screws with collar GB834-8845 DIN465 开槽滚花高头螺钉slotted knurled thumb screws with collar46 DIN466 滚花高螺母knurled thumb nuts with collar GB806-8847 DIN467 滚花薄螺母knurled thumb thin nuts GB807-8848 DIN470 锁紧垫圈sealing washers49 DIN471 轴用弹性挡圈retaining rings for shafts(external),circlips GB894.1-8650 DIN472 孔用弹性挡圈retaining rings for bores(internal),circlips GB893.1-8651 DIN478 方头带垫螺栓square head bolts with collar52 DIN479 方头圆柱底端螺栓square head bolts with half dog point53 DIN480 方头带垫半圆底端螺栓square head bolts with collar,half dog point and rounded end54 DIN508 T型槽螺母T-slot nuts ISO29955 DIN525 单头螺柱single end studs56 DIN529 地脚螺栓masonry bolts GB799-8857 DIN546 带槽圆螺母slotted round nuts GB817-7658 DIN547 端面带孔圆螺母round nuts with drilled holes in one face GB815-8859 DIN551 开槽平端紧定螺钉slotted sit screws with flat point ISO4776 GB73-8560 DIN553 开槽锥端紧定螺钉slotted set screws with cone point ISO7434 GB71-8561 DIN555 六角螺母hexagon nuts ISO403462 DIN557 方螺母-C square nuts GB39-8863 DIN558 六角头螺钉hexagon screws ISO401864 DIN561 六角头圆柱端紧定螺钉hexagon set screws with full dog point65 DIN562 薄型方螺母-B square nuts without bevel(pressed nuts)66 DIN571 六角头木螺钉hexagon head wood screws (coach screws) GB102-8667 DIN580 吊环螺钉lifting eye bolts ISO3266 GB825-7668 DIN582 吊环螺母lifting eye nuts69 DIN601 六角头螺栓hexagon bolts ISO401670 DIN603 大半圆头方颈螺栓(马车螺栓) mushroom head square neck bolts (carriage bolts) ISO8677 GB14-8871 DIN604 沉头带插销马车螺栓flat countersunk nib bolts72 DIN605 沉头长方颈马车螺栓flat countersunk long square neck bolts73 DIN607 半圆头带插销马车螺栓cup head nib bolts74 DIN608 沉头短方颈马车螺栓flat countersunk short square neck bolts75 DIN609 六角头精配螺栓（长螺纹）hexagon fitted bolts,long thread76 DIN610 六角头精配螺栓（短螺纹）hexagon fitted bolts,short thread77 DIN653 滚花平头螺钉knurled thumb screws thin type GB835-8878 DIN660 半圆头铆钉round head rivets ISO1051 GB867-8679 DIN661 沉头铆钉contersunk head rivets ISO1051 GB869-8680 DIN662 半沉头铆钉raised contersunk head rivets ISO105181 DIN674 大扁头铆钉mushroom head rivets ISO105182 DIN703 重型侧面带孔圆螺母adjusting rings,heavy range (shafting collars)83 DIN705 侧面带孔圆螺母adjusting rings,light range (shafting collars) GB816-8884 DIN741 卡头wire rope clips85 DIN787 T型槽螺钉T-slot screws ISO29986 DIN835 双头螺柱（牙长=2D）studs-metal (end=2d) GB900-8887 DIN906 内六角锥型闭锁螺钉hexagon socket pipe plugs,conical thread88 DIN908 内六角直型闭锁螺钉hexagon socket screw plugs,cyl. thread89 DIN909 外六角锥型闭锁螺钉hexagon head pipe plugs,conical thread90 DIN910 外六角直型闭锁螺钉hexagon head screw plugs,cyl.thread91 DIN911 内六角扳手socket wrenches ISO293692 DIN912 内六角圆柱头螺钉hexagon socket cap screws ISO4762 GB70-8593 DIN913 内六角平端紧定螺钉hexagon socket set screws with flat point ISO4026 GB77-8594 DIN914 内六角尖端紧定螺钉hexagon socket set screws with cone point ISO4027 GB78-8595 DIN915 内六角圆柱端紧定螺钉hexagon socket set screws with dog point ISO4028 GB79-8596 DIN916 内六角凹端紧定螺钉hexagon socket set screws with cup point ISO4029 GB80-8597 DIN917 薄型盲螺母hexagon cap nuts98 DIN920 开槽小圆柱头螺钉slotted short cheese head screws99 DIN921 开槽大圆柱头螺钉slotted large cheese head screws GB838-88100 DIN923 开槽圆柱头轴肩螺钉slotted pan head screws with shoulder GB830-88101 DIN927 开槽无头轴肩螺钉slotted shoulder screws102 DIN928 焊接方螺母square weld nuts GB/T13680-92103 DIN929 焊接六角螺母hexagon weld nuts GB/T13681-92104 DIN931 六角头螺栓（半牙）hexagon head screws ISO4014 GB5782-86105 DIN933 六角头螺栓（全牙）hexagon head screws ISO4017 GB5783-86106 DIN934 六角头螺母(1型) hexagon full nuts ISO4032 GB6170-86107 DIN934 细牙六角头螺母(1型) hexagon full nuts ISO8673 GB6171-86108 DIN935 开槽六角螺母hexagon slotted and castle nuts ISO7035 GB6178-86109 DIN936 六角头薄螺母hexagon thin nuts ISO4035 GB6172.1-86110 DIN937 六角头开槽薄螺母hexagon thin slotted and castle nuts ISO7038 GB6181-86111 DIN938 双头螺距（牙长=1D）studs metal (end=1d) GB897-88112 DIN939 双头螺距（牙长=1.25D）studs metal (end=1.25d) GB898-88113 DIN940 双头螺距（牙长=1.5D）studs metal (end=1.5d)114 DIN960 六角头细牙螺栓（半牙）hexagon head bolts,metric fine pitch thread ISO8765GB5785-86115 DIN961 六角头细牙螺栓（全牙）hexagon head bolts,metric fine pitch thread ISO8676GB5786-86116 DIN962 头部穿孔六角头螺栓additional shapes and versions for bolts117 DIN963 开槽沉头螺钉slotted countersund head screws ISO 2009 GB68-85118 DIN964 开槽半沉头螺钉slotted raised countersunk oval head screws ISO 2010 GB69-85119 DIN965 十字槽沉头螺钉cross recessed countersunk head screws ISO7046 GB819-85120 DIN966 十字槽半沉头螺钉cross recessed raised countersunk head screws ISO7047 GB820-85 121 DIN970 六角头螺母hexagon nuts type-1122 DIN971 六角头螺母hexagon nuts type-2123 DIN972 细牙六角头螺母(2型) hexagon nuts with fine thread ISO8674 GB6176-86124 DIN975 牙条(全螺纹) threaded rods(studdings) GB15389-94125 DIN976 螺纹销threaded pins(stud bolts)126 DIN979 六角头开槽薄螺母（2型）hexagon thin slotted and castle nuts127 DIN980 全金属六角锁紧螺母（1型）prevailling torque type hexagon nuts,all metall nuts ISO7199 GB6184-86128 DIN981 圆螺母locknuts ISO2982 GB812-88129 DIN982 六角头尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type ,with nylon insert ISO7040 GB889.1-86130 DIN985 六角头薄型尼龙锁紧螺母prevailling torque type hexagon nuts,heavy type ,with nylon insert ISO10511 GB6172.2-86131 DIN986 六角盖型尼龙锁紧螺母prevailling torque typedomed capnuts with nylon insert132 DIN988 配合垫片shim rings133 DIN1052 木材连接用垫片washers for timber connectors134 DIN1151 沉头钢钉round plain head nails135 DIN1440 销钉专用垫片A型plain washers for clevis pins(A型) ISO8738136 DIN1441 销钉专用垫片plain washers for clevis pins137 DIN1444 带头销钉clevis pins with head ISO2341138 DIN1471 圆锥型槽销grooved pins,taper grooved ISO8744 GB/T13829.2139 DIN1472 圆锥型槽销(半槽) grooved pins,taper grooved half length ISO8745 GB/T13829.2140 DIN1473 平行槽销(带倒角) grooved pins,parallel grooved full length ISO8740141 DIN1474 前端凹槽槽销grooved pins,reserve grooved half length ISO8741142 DIN1475 中部凹槽槽销grooved pins,centre grooved ISO8742143 DIN1476 圆头槽销grooved pins with round head ISO8746 GB/T13829.3144 DIN1477 沉头槽销grooved pins with countersunk head ISO8747145 DIN1479 六角螺母棒turnuckles(centre parts),made out of hexagon bar146 DIN1480 花篮螺栓turnuckles with eye bolt and hook bolt147 DIN1481 弹性圆柱销spring pins,heavy type ISO8752 GB879-86148 DIN1587 组合式盖型螺母hexagon domed cap nuts GB802-88149 DIN1804 开槽圆螺母（配合沟头扳手）slotted round nuts for hook spanner150 DIN1816 圆螺母（带插销孔）round nuts with set holes151 DIN2093 盘型弹簧垫圈disc springs152 DIN3017 喉箍hose clamps153 DIN3404 润滑油嘴（旋扭头）lubricating nipples,button head154 DIN3567 管夹shackles for conduilts155 DIN3570 U型螺栓stirrup bolts(U-bolts)156 DIN6319 球面垫圈spherical washers,conical seats GB849-88157 DIN6325 圆柱销parallel pins ISO8734158 DIN6330 厚六角螺母hexagon nuts ,1.5d GB56-88159 DIN6331 厚六角法兰面螺母hexagon nuts ,1.5d with collar GB6177-86160 DIN6334 长六角螺母hexagon nuts ,3d161 DIN6797-A 外齿锁紧垫圈external teeth lock washers GB862.1-87162 DIN6797-I 内齿锁紧垫圈internal teeth lock washers GB861.1-87163 DIN6798-A 外锯齿锁紧垫圈external teeth serrated lock washers GB862.2-87164 DIN6798-I 内锯齿锁紧垫圈internal teeth serrated lock washers GB861.2-87165 DIN6799 开口挡圈retaining rings for shafts(E-rings),circlips GB896-76166 DIN6885 平键（A型）parallel keys(form A ) ISO773/2491167 DIN6888 半圆键woodruff keys ISO3912168 DIN6899 嵌环（支撑环）thimbles169 DIN6900 机器螺钉和垫圈组合件screws and washers assemblies GB9074.1-.17170 DIN6901 自攻螺钉和垫圈组合件tapping screws and washers assemblies GB9074.18-.23 171 DIN6912 薄型带孔内六角圆柱头螺钉hexagon socket head cap screws with hole,low head 172 DIN6914 大六角头螺栓hexagon head bolts with large head(friction grip bolts)173 DIN6915 大六角螺母hexagon nuts with large wideth across flat(friction grip nuts)174 DIN6916 大垫圈round washers for friction grip bolts175 DIN6917 楔型方垫圈spuare taper washers for friction grip bolts on T-sections176 DIN6923 六角法兰面螺母hexagon flange nuts ISO4161 GB6177-86177 DIN6925 全金属六角锁紧螺母(2型）prevailing torque type hexagon nuts,all metallic nuts ISO7042 GB6185.1-2000178 DIN7337 开口型抽芯铆钉（沉头、扁圆头）blind rivets GB12617/12618179 DIN7338 扁平头半空心/全空心铆钉rivets for brake and clutch lining GB875/975-86180 DIN7343 螺旋夹紧销spiral pins ISO8750181 DIN7346 轻型弹性圆柱销spring pins,light type ISO13337182 DIN7349 重型弹性圆柱销用垫圈washers for bolts with heavy type spring pinss183 DIN7500 ISO公制螺纹螺钉(多种头型) threadforming screws for ISO-metric thread184 DIN7504 自攻自钻螺钉(多种头型) self-drilling tapping screws185 DIN7513 开槽切削螺纹螺钉(多种头型) thread cutting screws186 DIN7516 十字槽切削螺纹螺钉(多种头型) thread cutting screws cross recess187 DIN7965 T型四爪螺母tee nuts with pronge188 DIN7968 钢结构用六角头螺栓连接副hexagon head fitted bolts for steel structuresGB1228/1229/1230189 DIN7971 开槽盘头自攻螺钉pan head tapping screws with slot ISO1481 GB5282-85190 DIN7972 开槽沉头自攻螺钉countersunk flat head tapping screws with slot ISO1482GB5283-85191 DIN7973 开槽半沉头自攻螺钉raised countersunk oval head tapping screws with slot ISO1483 GB5284-85192 DIN7976 六角头自攻螺钉hexagon tapping screws ISO1479 GB5285-85193 DIN7980 圆柱头螺钉用弹簧垫圈spring lock washers for screws with cylindrical heads ISO8738 194 DIN7981 十字槽盘头自攻螺钉pan head tapping screws with cross recessed ISO 7049GB845-85195 DIN7982 十字槽沉头自攻螺钉countersunk flat head tapping screws with cross recessedISO7050 GB846-85196 DIN7983 十字槽半沉头自攻螺钉raised countersunk oval head tapping screws with cross recessed ISO7051 GB847-86197 DIN7984 薄型内六角圆柱头螺钉hexagon socket head cap screws with，reduced head198 DIN7985 十字槽盘头螺钉pan head screws with cross recessed ISO7045 GB818-85199 DIN7989 钢结构用垫圈washers for steel structures GB1230-84200 DIN7990 钢结构用六角头螺栓hexagon head bolts for steel structures GB1229-84201 DIN7991 内六角沉头螺钉hexagon socket countersunk head screws ISO10642202 DIN7993 轴用钢丝挡圈roundwire snap rings for shafts GB895.2-86203 DIN7995 十字槽半沉头木螺钉cross recessed raised countersunk head wood screws GB952-86 204 DIN7996 十字槽圆头木螺钉cross recessed round head wood screws GB950-86205 DIN7997 十字槽沉头木螺钉cross recessed countersunk head wood screws GB951-86206 DIN8140 螺纹护套（普通\自锁等）ciol inserts,coarse,fine thread,silf locking207 DIN9021 大外径垫圈washers,outside diameter appro.3d ISO7093 GB96-85208 DIN11024 弹簧卡子spring cotter for a bolt209 DIN13257 平板螺栓belting bolts (elevator bolts)210 DIN18182 干壁钉（墙板钉）dry wall screws211 DIN28129 环型螺母lifting nuts(eye nuts) GB63-88212 DIN70952 圆螺母用止退垫圈tab washers for slotted round nuts GB858-88。

螺栓螺母德标、欧标、国标对照表—— DIN EN ISO GB对照表之青柳念文创作新德标旧德标英文名中文名国标DIN EN ISO4014DIN 931-1Hexagon head bolts - Product grades Aand B(ISO 4014:1999)六角头螺栓GB/T 5782-2000DIN EN ISO4016DIN 601Hexagon head bolts - Product gradeC(ISO 4016:1999)六角头螺栓 C级GB/T 5780-2000DIN EN ISO4017DIN 933Hexagon head screws - Product grade Aand B (ISO 4017:1999)六角头螺栓全罗纹GB/T 5783-2000DIN EN ISO4018DIN 558Hexagon head screws - Product grade C(ISO 4018:1999)六角头螺栓全罗纹 C级GB/T 5781-2000DIN EN ISO8676DIN 961Hexagon head screws with metric finepitch thread - Product grade A and B(ISO8676:1999)六角头螺栓细牙全罗纹GB/T 5786-2000DIN EN ISO8765DIN 960Hexagon head bolts with fine pitchthread - Product grades A and B(ISO8765:1999)六角头螺栓细牙GB/T 5785-2000DIN EN ISO4032DIN 934Hexagon nuts,style 1-Product grades Aand B(ISO: 4032:1999)1型六角螺母GB/T 6170-2000DIN EN ISO4033Hexagon nuts,style 2-Product grades Aand B(ISO: 4033:1999)2型六角螺母GB/T 6175-2000DIN EN ISO4034DIN 555Hexagon nuts - Product grade C (ISO4034:1999)六角螺母 C级GB/T 41-2000DIN EN ISO4035DIN 439-2Hexagon thin nuts(chamfered)-Productgrade A and B (ISO 4035:1999)六角薄螺母DINEN ISO 4036DIN 439-1Hexagon thin nuts - Product gradeB(unchamfered)(ISO 4036:1999)六角薄螺母无倒角GB/T 6174-2000DIN EN ISO8673DIN 934|DIN 971-1Hexagon nuts,style 1,with metric finepitch thread - Product grades A and B(ISO 8673:1999)1型六角螺母细牙GB/T 6171-2000DIN EN ISO8674DIN 971-2Hexagon nuts,style 2,with metric finepitch thread - Product grades A and B(ISO 8674:1999)2型六角螺母细牙GB/T 6176-2000DIN EN ISO8675DIN 439-2Hexagon thin nuts with metric fine pitchthread - Product grades A and B (ISO8675:1999)六角薄螺母细牙GB/T 6173-2000DIN EN ISO4762DIN 912Hexagon socket head cap screws(ISO4762:1997)内六角圆柱头螺钉DIN EN ISO7380Hexagon socket button head sxrews (ISO7380:1997)内六角平圆头螺钉DIN EN ISO 10642DIN 7991H exagon socket countersunk headscrews (ISO 10642:1997)内六角沉头螺钉DIN EN ISO1207DIN 84Slotted cheese head screws-Productgrade A(ISO 1207:1992)开槽圆柱头螺钉GB/T 65-2000DIN EN ISO1580DIN 85Slotted pan head screws-Product gradeA(ISO 1580:1994)开槽盘头螺钉GB/T 67-2000DIN EN ISO2009DIN 963Slotted countersunk flat headscrews(common head style)(ISO2009:1994)开槽沉头螺钉GB/T 68-2000DIN EN ISO2010DIN 964Countersunk slotted raised headscrews(common head style)-Producegrade A(ISO 2010:1994)开槽半沉头螺钉GB/T 69-2000DIN EN ISO7045DIN 7985P an head screws with type H or type Zcross recess-Product grade A(ISO7054:1994)十字槽盘头螺钉GB/T 818-2000DIN EN ISO 7046-1DIN 965Countersunk flat head screws (common head style)with type H or type Z crossrecess,product grade A-Part 1:Steel ofproperty class 4.8(ISO 7046-1:1994)DIN EN ISO 7046-2DIN 965Cross recessed countersunk flat headscrews (common head style),productgrade A-Part2:Steel of property class8.8,stainless steel and nonferousmetals(ISO 7046-2:1990)十字槽沉头螺钉第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3DIN EN ISO7047DIN 966Countersunk raised head screws(common head style) with type H ortype Z cross recess-Product grade A(ISO7047:1994)十字槽半沉头螺钉GB/T 820-2000DIN EN ISO7048Cross recessed cheese head screws (ISO7048:1998)十字槽圆柱头螺钉GB/T 822-2000DIN EN ISO 10644Screw and washer assemblies with plainwashers-Washer hardness classes200HV and 300HV(ISO 10644:1998)螺栓或螺钉和平垫圈组合件DIN EN ISO 10510Tapping screw and washer assemblieswith plain washers(ISO 10510l:1999)自攻螺钉和平垫圈组合件IDN EN ISO 15480Hexagon washer head drilling screwswith tapping screws thread (ISO15480:1999)六角凸缘自钻自攻螺钉IDN EN ISO 15481Cross recessed pan head drilling screwswith tapping screw thread(ISO15481:1999)十字槽盘头自钻自攻螺钉IDN EN ISO 15482Cross recessed countersunk head drillingscrews with tapping screw thread (ISO15482:1999)十字槽沉头自钻自攻螺钉IDN EN ISO 15483Cross recessed raised countersunk headdrilling screws with tapping screwthread(ISO 15483:1999)十字槽半沉头自钻自攻螺钉DIN EN ISO 10669Plain washers for tapping screw andwasher assemblies - Normal and largeseries - Product grade A （ISO平垫圈用于自攻螺钉和垫圈组合件10669:1999)DIN EN ISO 10673Plain washers for screw and washerassemblies - Small,normal and largeseries - Product grade A (ISO10673:1998)平垫圈用于螺钉和垫圈组合件DIN EN ISO2338DIN 7Parallel pins,of unhardened steel andaustenitic stainless steel(ISO 2338:1997)圆柱销不淬硬钢和奥氏体不锈钢DIN EN ISO8733DIN 7979P arallel pins whit internal thread,ofunhardened steel and austeniticstainless steel(ISO 8733:1997)内罗纹圆柱销不淬硬钢和奥氏体不锈钢DIN EN ISO8734DIN 6325P arallel pins,of hardened steel ormartensitic stainless steel(Dowelpins)(ISO 8734:1997)圆柱销淬硬钢和马氏体不锈钢DIN EN ISO8735DIN 7979P arallel pins with internal thread,ofhardened steel and martensitic stainlesssteel(ISO 8735:1997)内罗纹圆柱销淬硬钢和马氏体不锈钢DIN EN ISO8748DIN 7344S pring-type straight pins,coiled,heavyduty (ISO 8748:1997)弹性圆柱销卷制重型DIN EN ISO8750DIN 7343S pring-type straight pins,coiled,standardduty (ISO 8750:1997)弹性圆柱销卷制尺度型DIN EN ISO8751Spring-type straight pins,coiled,lightduty （ISO 8751:1997)弹性圆柱销卷制轻型DIN EN ISO8752DIN 1481S pring-type straight pins,slotted,heavyduty (ISO 8752:1997)弹性圆柱销直槽重型DIN EN ISO 13337DIN 7346S pring-type straight pins,slotted,lightduty (ISO 13337:1997)弹性圆柱销直槽轻型DIN EN ISO1234DIN 94Split pins （ISO1234:1997)启齿销GB/T 91-2000DIN EN ISO7089Plain washers-Normal series-Productgrade A平垫圈 A级DIN EN ISO7090Plain washers,chamfered-Normal series-Product grade A(ISO 7090:2000)平垫圈倒角型 A级DIN EN ISO7091Plain washers-Normal series-Productgrade C(ISO 7091:2000)平垫圈 C级GB/T 95-2002DIN EN ISO7092Plain washers-Small series-Productgrade A(ISO 7092:2000)小垫圈 A级GB/T 848-2002DIN EN ISO 7093-1Plain washers-Large series-Part 1:Product grade A(ISO 70931-1:2000)大垫圈 A级DIN EN ISO 7093-2Plain washers-Normal series-Part 3:Product grade C(ISO 70936-2:2000)大垫圈 C级DIN EN ISO7094Plain washers-Extra large series -Productgrade C(ISO 7094:2000)特大垫圈 C级GB/T 5287-2002DIN EN ISO7040DIN 982|DIN 6924Prevailing torque type hexagon nuts(with non-metallic insert),style 1 -1型非金属嵌件六角锁紧Property classes 5,8 and 10(ISO7040:1997)螺母DIN EN ISO7042DIN 980|DIN 6925Prevailing torque type all-metal hexagonnuts,style 2 - Property classes 5,8, 10and 12(ISO 7042:1997)2型全金属六角锁紧螺母DIN EN ISO7719Prevailing torque type all-metal hexagonnuts,style 1- Property classes 5,8 and10(ISO 7719:1997)1型全金属六角锁紧螺母GB/T 6184-2000DIN EN ISO 10511DIN 985Prevailing torque type hexagon thin nuts(with non-metallic insert )(ISO10511:1997)非金属嵌件六角锁紧薄螺母DIN EN ISO 10512DIN 982|DIN 6924Prevailing torque type hexagon nuts(with non-metallic insert),style 1,withmetric fine pitch thread-Property classes6,8 and 10(ISO 10512:1997)1型非金属嵌件六角锁紧螺母细牙DIN EN ISO 10513DIN 980|DIN 6925Prevailing torque type all-metal hexagonnuts,style 2,with metric fine pitchthread - Property classes 8,10 and12(ISO 10513:1997)2型全金属六角锁紧螺母细牙。

德标、欧标、国际、国标对照表 —— DIN EN ISO GB 对照表新德标旧德标 英文名 中文名 国标 DIN EN ISO 4014DIN 931-1 Hexagon head bolts - Product grades A and B(ISO 4014:1999) 六角头螺栓 GB/T 5782-2000 DIN EN ISO 4016DIN 601 Hexagon head bolts - Product grade C(ISO 4016:1999) 六角头螺栓 C 级 GB/T 5780-2000 DIN EN ISO 4017DIN 933 Hexagon head screws - Product grade A and B (ISO 4017:1999) 六角头螺栓 全螺纹 GB/T 5783-2000 DIN EN ISO 4018DIN 558 Hexagon head screws - Product grade C (ISO 4018:1999) 六角头螺栓 全螺纹 C 级 GB/T 5781-2000 DIN EN ISO 8676DIN 961 Hexagon head screws with metric fine pitch thread - Product grade A and B(ISO 8676:1999) 六角头螺栓 细牙 全螺纹 GB/T 5786-2000 DIN EN ISO 8765DIN 960 Hexagon head bolts with fine pitch thread - Product grades A and B(ISO 8765:1999) 六角头螺栓 细牙 GB/T 5785-2000 DIN EN ISO 4032DIN 934 Hexagon nuts,style 1-Product grades A and B(ISO: 4032:1999) 1型六角螺母 GB/T 6170-2000 DIN EN ISO 4033Hexagon nuts,style 2-Product grades A and B(ISO: 4033:1999) 2型六角螺母 GB/T 6175-2000 DIN EN ISO 4034DIN 555 Hexagon nuts - Product grade C (ISO 4034:1999) 六角螺母 C 级 GB/T 41-2000 DIN EN ISO 4035DIN 439-2 Hexagon thin nuts(chamfered)-Product grade A and B (ISO 4035:1999) 六角薄螺母 GB/T 6172.1-2000 DIN EN ISO 4036DIN 439-1 Hexagon thin nuts - Product grade B(unchamfered)(ISO 4036:1999) 六角薄螺母 无倒角 GB/T 6174-2000 DIN EN ISO 8673DIN 934| DIN 971-1 Hexagon nuts,style 1,with metric fine pitch thread - Product grades A and B (ISO 8673:1999) 1型六角螺母 细牙 GB/T 6171-2000 DIN EN ISO 8674DIN 971-2 Hexagon nuts,style 2,with metric fine pitch thread - Product grades A and B (ISO 8674:1999) 2型六角螺母 细牙 GB/T 6176-2000 DIN EN ISO 8675 DIN 439-2 Hexagon thin nuts with metric fine pitch thread - Product grades A and B (ISO 8675:1999)六角薄螺母 细牙GB/T 6173-2000DIN EN ISO 4762DIN 912 Hexagon socket head cap screws(ISO 4762:1997) 内六角圆柱头螺钉 GB/T 70.1-2000 DIN EN ISO 7380Hexagon socket button head sxrews (ISO 7380:1997) 内六角平圆头螺钉 GB/T 70.2-2000 DIN EN ISO 10642DIN 7991 Hexagon socket countersunk head screws (ISO 10642:1997) 内六角沉头螺钉 GB/T 70.3-2000 DIN EN ISO 1207DIN 84 Slotted cheese head screws-Product grade A(ISO 1207:1992) 开槽圆柱头螺钉 GB/T 65-2000 DIN EN ISO 1580DIN 85 Slotted pan head screws-Product grade A(ISO 1580:1994) 开槽盘头螺钉 GB/T 67-2000 DIN EN ISO 2009DIN 963 Slotted countersunk flat head screws(common head style)(ISO 2009:1994) 开槽沉头螺钉 GB/T 68-2000 DIN EN ISO 2010DIN 964 Countersunk slotted raised head screws(common head style)-Produce grade A(ISO 2010:1994) 开槽半沉头螺钉 GB/T 69-2000 DIN EN ISO 7045DIN 7985 Pan head screws with type H or type Z cross recess-Product grade A(ISO 7054:1994) 十字槽盘头螺钉 GB/T 818-2000 DIN EN ISO 7046-1DIN 965 Countersunk flat head screws (common head style)with type H or type Z cross recess,product grade A-Part 1:Steel of property class 4.8(ISO 7046-1:1994) 十字槽盘头螺钉 第1部分：钢4.8级 GB/T 819.1-2000 DIN EN ISO 7046-2DIN 965 Cross recessed countersunk flat head screws (common head style),product grade A-Part2:Steel of property class 8.8,stainless steel and nonferous metals(ISO 7046-2:1990) 十字槽沉头螺钉 第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3 GB/T 819.2-1997 DIN EN ISO 7047DIN 966 Countersunk raised head screws (common head style) with type H or type Z cross recess-Product grade A(ISO 7047:1994) 十字槽半沉头螺钉 GB/T 820-2000 DIN EN ISO 7048Cross recessed cheese head screws (ISO 7048:1998) 十字槽圆柱头螺钉 GB/T 822-2000 DIN EN ISO 10644Screw and washer assemblies with plain washers-Washer hardness classes 200HV and 300HV(ISO 10644:1998) 螺栓或螺钉和平垫圈组合件 GB/T 9074.1-2002 DIN EN ISO 10510Tapping screw and washer assemblies with plain washers(ISO 10510l:1999) 自攻螺钉和平垫圈组合件 GB/T 9074.18-2002 IDN EN ISO 15480 Hexagon washer head drilling screws with tapping screws thread (ISO 15480:1999)六角凸缘自钻自攻螺钉 GB/T 15856.5-2002IDN EN ISO 15481Cross recessed pan head drilling screws with tapping screw thread(ISO 15481:1999) 十字槽盘头自钻自攻螺钉 GB/T 15856.1-2002 IDN EN ISO 15482Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999) 十字槽沉头自钻自攻螺钉 GB/T 15856.2-2002 IDN EN ISO 15483Cross recessed raised countersunk head drilling screws with tapping screw thread(ISO 15483:1999) 十字槽半沉头自钻自攻螺钉 GB/T 15856.3-2002 DIN EN ISO 10669Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A （ISO 10669:1999) 平垫圈 用于自攻螺钉和垫圈组合件 GB/T 97.5-2002 DIN EN ISO 10673Plain washers for screw and washer assemblies - Small,normal and large series - Product grade A (ISO 10673:1998) 平垫圈 用于螺钉和垫圈组合件 GB/T 97.4-2002 DIN EN ISO 2338DIN 7 Parallel pins,of unhardened steel and austenitic stainless steel(ISO 2338:1997) 圆柱销 不淬硬钢和奥氏体不锈钢 GB/T 119.1-2000 DIN EN ISO 8733DIN 7979 Parallel pins whit internal thread,of unhardened steel and austenitic stainless steel(ISO 8733:1997) 内螺纹圆柱销 不淬硬钢和奥氏体不锈钢 GB/T 120.1-2000 DIN EN ISO 8734DIN 6325 Parallel pins,of hardened steel or martensitic stainless steel(Dowel pins)(ISO 8734:1997) 圆柱销 淬硬钢和马氏体不锈钢 GB/T 119.2-2000 DIN EN ISO 8735DIN 7979 Parallel pins with internal thread,of hardened steel and martensitic stainless steel(ISO 8735:1997) 内螺纹圆柱销 淬硬钢和马氏体不锈钢 GB/T 120.2-2000 DIN EN ISO 8748DIN 7344 Spring-type straight pins,coiled,heavy duty (ISO 8748:1997) 弹性圆柱销 卷制 重型 GB/T 879.3-2000 DIN EN ISO 8750DIN 7343 Spring-type straight pins,coiled,standard duty (ISO 8750:1997) 弹性圆柱销 卷制 标准型 GB/T 879.4-2000 DIN EN ISO 8751Spring-type straight pins,coiled,light duty （ISO 8751:1997) 弹性圆柱销 卷制 轻型 GB/T 879.5-2000 DIN EN ISO 8752DIN 1481 Spring-type straight pins,slotted,heavy duty (ISO 8752:1997) 弹性圆柱销 直槽 重型 GB/T 879.1-2000 DIN EN ISO 13337DIN 7346 Spring-type straight pins,slotted,light duty (ISO 13337:1997) 弹性圆柱销 直槽 轻型 GB/T 879.2-2000 DIN EN ISO 1234 DIN 94 Split pins （ISO1234:1997) 开口销 GB/T 91-2000DIN EN ISO 7089Plain washers-Normal series-Product grade A 平垫圈 A 级 GB/T 97.1-2002 DIN EN ISO 7090Plain washers,chamfered-Normal series-Product grade A(ISO 7090:2000) 平垫圈 倒角型 A 级 GB/T 97.2-2002 DIN EN ISO 7091Plain washers-Normal series-Product grade C(ISO 7091:2000) 平垫圈 C 级 GB/T 95-2002 DIN EN ISO 7092Plain washers-Small series-Product grade A(ISO 7092:2000) 小垫圈 A 级 GB/T 848-2002 DIN EN ISO 7093-1Plain washers-Large series-Part 1: Product grade A(ISO 70931-1:2000) 大垫圈 A 级 GB/T 96.1-2002 DIN EN ISO 7093-2Plain washers-Normal series-Part 3: Product grade C(ISO 70936-2:2000) 大垫圈 C 级 GB/T 96.2-2002 DIN EN ISO 7094Plain washers-Extra large series -Product grade C(ISO 7094:2000) 特大垫圈 C 级 GB/T 5287-2002 DIN EN ISO 7040DIN 982| DIN 6924 Prevailing torque type hexagon nuts (with non-metallic insert),style 1 - Property classes 5,8 and 10(ISO 7040:1997) 1型非金属嵌件六角锁紧螺母 GB/T 889.1-2000 DIN EN ISO 7042DIN 980| DIN 6925 Prevailing torque type all-metal hexagon nuts,style 2 - Property classes 5,8, 10 and 12(ISO 7042:1997) 2型全金属六角锁紧螺母 GB/T 6185.1-2000 DIN EN ISO 7719Prevailing torque type all-metal hexagon nuts,style 1- Property classes 5,8 and 10(ISO 7719:1997) 1型全金属六角锁紧螺母 GB/T 6184-2000 DIN EN ISO 10511DIN 985 Prevailing torque type hexagon thin nuts (with non-metallic insert )(ISO 10511:1997) 非金属嵌件六角锁紧薄螺母 GB/T 6072.2-2000 DIN EN ISO 10512DIN 982| DIN 6924 Prevailing torque type hexagon nuts (with non-metallic insert),style 1,with metric fine pitch thread-Property classes 6,8 and 10(ISO 10512:1997) 1型非金属嵌件六角锁紧螺母 细牙 GB/T 889.2-2000 DIN EN ISO 10513 DIN 980|DIN 6925 Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread - Property classes 8,10 and 12(ISO 10513:1997)2型全金属六角锁紧螺母 细牙GB/T 6185.2-2000原汁原味的德标 DIN (ISO、EN)、美标 IFI (ANSI, ASME, SAE)、公制美标、日标 JIS 资料！。

新旧德标、英标、国际、国标对照表（一）—— DIN EN ISO GB 对照表新德标旧德标 英文名 中文名 国标 IDN EN ISO 15481Cross recessed pan head drilling screws with tapping screw thread(ISO 15481:1999) 十字槽盘头自钻自攻螺钉 GB/T 15856.1-2002 IDN EN ISO 15482Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999) 十字槽沉头自钻自攻螺钉 GB/T 15856.2-2002 IDN EN ISO 15483Cross recessed raised countersunk head drilling screws with tapping screw thread(ISO 15483:1999) 十字槽半沉头自钻自攻螺钉 GB/T 15856.3-2002 DIN EN ISO 10669Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A （ISO 10669:1999) 平垫圈用于自攻螺钉和垫圈组合件 GB/T 97.5-2002 DIN EN ISO 10673Plain washers for screw and washer assemblies - Small,normal and large series - Product grade A (ISO 10673:1998) 平垫圈用于螺钉和垫圈组合件 GB/T 97.4-2002 DIN EN ISO 2338DIN 7 Parallel pins,of unhardened steel and austenitic stainless steel(ISO 2338:1997) 圆柱销不淬硬钢和奥氏体不锈钢 GB/T 119.1-2000 DIN EN ISO 8733DIN 7979 Parallel pins whit internal thread,of unhardened steel and austenitic stainless steel(ISO 8733:1997) 内螺纹圆柱销不淬硬钢和奥氏体不锈钢 GB/T 120.1-2000 DIN EN ISO 8734 DIN 6325 Parallel pins,of hardened steel or martensitic stainless steel(Dowel pins)(ISO 8734:1997) 圆柱销淬硬钢和马氏体不锈钢GB/T 119.2-2000DIN EN ISO 8735DIN 7979 Parallel pins with internal thread,of hardened steel and martensitic stainless steel(ISO 8735:1997) 内螺纹圆柱销淬硬钢和马氏体不锈钢 GB/T 120.2-2000 DIN EN ISO 8748DIN 7344 Spring-type straight pins,coiled,heavy duty (ISO 8748:1997) 弹性圆柱销 卷制 重型 GB/T 879.3-2000 DIN EN ISO 8750DIN 7343 Spring-type straight pins,coiled,standard duty (ISO 8750:1997) 弹性圆柱销 卷制 标准型 GB/T 879.4-2000 DIN EN ISO 8751Spring-type straight pins,coiled,light duty （ISO 8751:1997) 弹性圆柱销 卷制 轻型 GB/T 879.5-2000 DIN EN ISO 8752DIN 1481 Spring-type straight pins,slotted,heavy duty (ISO 8752:1997) 弹性圆柱销 直槽 重型 GB/T 879.1-2000 DIN EN ISO 13337DIN 7346 Spring-type straight pins,slotted,light duty (ISO 13337:1997) 弹性圆柱销 直槽 轻型 GB/T 879.2-2000 DIN EN ISO 1234DIN 94 Split pins （ISO1234:1997) 开口销 GB/T 91-2000 DIN EN ISO 7089Plain washers-Normal series-Product grade A 平垫圈 A 级 GB/T 97.1-2002 DIN EN ISO 7090Plain washers,chamfered-Normal series-Product grade A(ISO 7090:2000) 平垫圈倒角型 A 级 GB/T 97.2-2002 DIN EN ISO 7091Plain washers-Normal series-Product grade C(ISO 7091:2000) 平垫圈 C 级 GB/T 95-2002 DIN EN ISO 7092Plain washers-Small series-Product grade A(ISO 7092:2000) 小垫圈 A 级 GB/T 848-2002 DIN EN ISO 7093-1Plain washers-Large series-Part 1: Product grade A(ISO 70931-1:2000) 大垫圈 A 级 GB/T 96.1-2002 DIN EN ISO 7093-2Plain washers-Normal series-Part 3: Product grade C(ISO 70936-2:2000) 大垫圈 C 级 GB/T 96.2-2002 DIN EN ISO 7094Plain washers-Extra large series -Product grade C(ISO 7094:2000) 特大垫圈 C 级 GB/T 5287-2002 DIN EN ISO 7040DIN 982| DIN 6924 Prevailing torque type hexagon nuts (with non-metallic insert),style 1 - Property classes 5,8 and 10(ISO 7040:1997) 1型非金属嵌件六角锁紧螺母 GB/T 889.1-2000 DIN EN ISO 7042 DIN 980| DIN 6925 Prevailing torque type all-metal hexagon nuts,style 2 - Property classes 5,8, 10 and 12(ISO 7042:1997) 2型全金属六角锁紧螺母GB/T 6185.1-2000DIN EN ISO 7719 Prevailing torque type all-metal hexagon nuts,style 1- Property classes 5,8 and 10(ISO 7719:1997) 1型全金属六角锁紧螺母 GB/T 6184-2000 DIN EN ISO 10511 DIN 985 Prevailing torque type hexagon thin nuts (with non-metallic insert )(ISO 10511:1997) 非金属嵌件六角锁紧薄螺母 GB/T 6072.2-2000 DIN EN ISO 10512 DIN 982| DIN 6924 Prevailing torque type hexagon nuts (with non-metallic insert),style 1,with metric fine pitch thread-Property classes 6,8 and 10(ISO 10512:1997) 1型非金属嵌件六角锁紧螺母 细牙 GB/T 889.2-2000 DIN EN ISO 10513DIN 980| DIN 6925 Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread - Property classes 8,10 and 12(ISO 10513:1997) 2型全金属六角锁紧螺母 细牙 GB/T 6185.2-2000。

din标准与国标对照表
“DIN”标准，全称德标标准，是指德语中的德国国家标准，指协调用
于欧洲贸易中的技术规范，以及开发和欧洲国家部门，行业协会，科
学院，标准机构和国际组织制定的技术文件。

德标标准又叫DIN标准，是德国国家标准的缩写，是欧洲最普遍的一种国家标准，也是德国国
家的标准编写机构。

德国国家标准DIN标准与我国国家标准的对照表如下：
第一，质量管理的DIN EN ISO 9001质量管理体系标准，与我国国
标GB/T 19001-2016质量管理体系相对应；
第二，DIN EN ISO 14001环境管理体系标准，与我国国标GB/T 24001-2016环境管理体系相对应；
第三，DIN EN ISO/IEC 27034应用安全标准，与我国国标GB/T 25286-2010应用安全相对应；
第四，DIN EN ISO/IEC 17025实验室质量管理体系标准，与我国国
标GB/T 16170-2005实验室质量管理体系标准相对应。

最后，DIN EN ISO/IEC 27001信息安全管理体系标准，与我国国标
GB/T 28001-2001信息安全管理体系标准相对应。

以上就是德标标准DIN与国标标准的对照表，它们主要是用于欧洲贸
易中的技术规范，以及由欧洲国家部门，行业协会，科学院，标准机
构和国际组织制定的技术文件。

德标标准之所以在欧洲得到普遍采用，
主要是由于它以科学、公正的方式，统一欧洲的产品质量，使欧洲市场紧凑、有序。

新德标旧德标英文名中文名国标DIN EN ISO 4014DIN 931-1Hexagon head bolts -Product grades A and B(ISO4014:1999)六角头螺栓GB/T 5782-2000DIN EN ISO 4016DIN 601Hexagon head bolts -Product grade C(ISO4016:1999)六角头螺栓 C级GB/T 5780-2000DIN EN ISO 4017DIN 933Hexagon head screws -Product grade A and B (ISO4017:1999)六角头螺栓全螺纹GB/T 5783-2000DIN EN ISO 4018DIN 558Hexagon head screws -Product grade C (ISO4018:1999)六角头螺栓全螺纹 C级GB/T 5781-2000DIN EN ISO 8676DIN 961Hexagon head screws withmetric fine pitch thread -Product grade A and B(ISO8676:1999)六角头螺栓细牙全螺纹GB/T 5786-2000DIN EN ISO 8765DIN 960Hexagon head bolts withfine pitch thread -Product grades A and B(ISO8765:1999)六角头螺栓细牙GB/T 5785-2000DIN EN ISO 4032DIN 934Hexagon nuts,style 1-Product grades A andB(ISO: 4032:1999)1型六角螺母GB/T 6170-2000DIN EN ISO 4033Hexagon nuts,style 2-Product grades A andB(ISO: 4033:1999)2型六角螺母GB/T 6175-2000DIN EN ISO 4034DIN 555Hexagon nuts - Productgrade C (ISO 4034:1999)六角螺母 C级GB/T 41-2000DIN EN ISO 4035DIN 439-2Hexagon thinnuts(chamfered)-Productgrade A and B (ISO4035:1999)六角薄螺母GB/T 6172.1-2000DINEN ISO 4036DIN 439-1Hexagon thin nuts -Product gradeB(unchamfered)(ISO4036:1999)六角薄螺母无倒角GB/T 6174-2000DIN EN ISO 8673DIN 934|DIN 971-1Hexagon nuts,style 1,withmetric fine pitch thread -Product grades A and B(ISO 8673:1999)1型六角螺母细牙GB/T 6171-2000DIN EN ISO 8674DIN 971-2Hexagon nuts,style 2,withmetric fine pitch thread -Product grades A and B(ISO 8674:1999)2型六角螺母细牙GB/T 6176-2000DIN EN ISO 8675DIN 439-2Hexagon thin nuts withmetric fine pitch thread -Product grades A and B(ISO 8675:1999)六角薄螺母细牙GB/T 6173-2000DIN EN ISO 4762DIN 912Hexagon socket head cap内六角圆柱头螺GB/T 70.1-2000DIN EN ISO 7380Hexagon socket button headsxrews (ISO 7380:1997)内六角平圆头螺钉GB/T 70.2-2000DIN EN ISO 10642DIN 7991Hexagon socket countersunkhead screws (ISO10642:1997)内六角沉头螺钉GB/T 70.3-2000DIN EN ISO 1207DIN 84Slotted cheese headscrews-Product grade A(ISO1207:1992)开槽圆柱头螺钉GB/T 65-2000DIN EN ISO 1580DIN 85Slotted pan head screws-Product grade A(ISO1580:1994)开槽盘头螺钉GB/T 67-2000DIN EN ISO 2009DIN 963Slotted countersunk flathead screws(common headstyle)(ISO 2009:1994)开槽沉头螺钉GB/T 68-2000DIN EN ISO 2010DIN 964Countersunk slotted raisedhead screws(common headstyle)-Produce grade A(ISO2010:1994)开槽半沉头螺钉GB/T 69-2000DIN EN ISO 7045DIN 7985Pan head screws with typeH or type Z cross recess-Product grade A(ISO7054:1994)十字槽盘头螺钉GB/T 818-2000DIN EN ISO 7046-1DIN 965Countersunk flat headscrews (common headstyle)with type H or typeZ cross recess,productgrade A-Part 1:Steel ofproperty class 4.8(ISO7046-1:1994)十字槽盘头螺钉第1部分：钢4.8级GB/T 819.1-2000DIN EN ISO 7046-2DIN 965Cross recessed countersunkflat head screws (commonhead style),product gradeA-Part2:Steel of propertyclass 8.8,stainless steeland nonferous metals(ISO7046-2:1990)十字槽沉头螺钉第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3GB/T 819.2-1997DIN EN ISO 7047DIN 966Countersunk raised headscrews (common head style)with type H or type Zcross recess-Product gradeA(ISO 7047:1994)十字槽半沉头螺钉GB/T 820-2000DIN EN ISO 7048Cross recessed cheese headscrews (ISO 7048:1998)十字槽圆柱头螺钉GB/T 822-2000DIN EN ISO 10644Screw and washerassemblies with plainwashers-Washer hardnessclasses 200HV and300HV(ISO 10644:1998)螺栓或螺钉和平垫圈组合件GB/T 9074.1-2002DIN EN ISO 10510Tapping screw and washerassemblies with plain自攻螺钉和平垫圈组合件GB/T 9074.18-2002IDN EN ISO 15480Hexagon washer headdrilling screws withtapping screws thread (ISO15480:1999)六角凸缘自钻自攻螺钉GB/T 15856.5-2002IDN EN ISO 15481Cross recessed pan headdrilling screws withtapping screw thread(ISO15481:1999)十字槽盘头自钻自攻螺钉GB/T 15856.1-2002IDN EN ISO 15482Cross recessed countersunkhead drilling screws withtapping screw thread (ISO15482:1999)十字槽沉头自钻自攻螺钉GB/T 15856.2-2002IDN EN ISO 15483Cross recessed raisedcountersunk head drillingscrews with tapping screwthread(ISO 15483:1999)十字槽半沉头自钻自攻螺钉GB/T 15856.3-2002DIN EN ISO 10669Plain washers for tappingscrew and washerassemblies - Normal andlarge series - Productgrade A （ISO 10669:1999)平垫圈用于自攻螺钉和垫圈组合件GB/T 97.5-2002DIN EN ISO 10673Plain washers for screwand washer assemblies -Small,normal and largeseries - Product grade A(ISO 10673:1998)平垫圈用于螺钉和垫圈组合件GB/T 97.4-2002DIN EN ISO 2338DIN 7Parallel pins,ofunhardened steel andaustenitic stainlesssteel(ISO 2338:1997)圆柱销不淬硬钢和奥氏体不锈钢GB/T 119.1-2000DIN EN ISO 8733DIN 7979Parallel pins whitinternal thread,ofunhardened steel andaustenitic stainlesssteel(ISO 8733:1997)内螺纹圆柱销不淬硬钢和奥氏体不锈钢GB/T 120.1-2000DIN EN ISO 8734DIN 6325Parallel pins,of hardenedsteel or martensiticstainless steel(Dowelpins)(ISO 8734:1997)圆柱销淬硬钢和马氏体不锈钢GB/T 119.2-2000DIN EN ISO 8735DIN 7979Parallel pins withinternal thread,ofhardened steel andmartensitic stainlesssteel(ISO 8735:1997)内螺纹圆柱销淬硬钢和马氏体不锈钢GB/T 120.2-2000DIN EN ISO 8748DIN 7344Spring-type straightpins,coiled,heavy duty(ISO 8748:1997)弹性圆柱销卷制重型GB/T 879.3-2000DIN EN ISO 8750DIN 7343Spring-type straightpins,coiled,standard duty(ISO 8750:1997)弹性圆柱销卷制标准型GB/T 879.4-2000DIN EN ISO 8751Spring-type straightpins,coiled,light duty（ISO 8751:1997)弹性圆柱销卷制轻型GB/T 879.5-2000DIN EN ISO 8752DIN 1481Spring-type straightpins,slotted,heavy duty(ISO 8752:1997)弹性圆柱销直槽重型GB/T 879.1-2000DIN EN ISO 13337DIN 7346Spring-type straightpins,slotted,light duty(ISO 13337:1997)弹性圆柱销直槽轻型GB/T 879.2-2000DIN EN ISO 1234DIN 94Split pins （ISO1234:1997)开口销GB/T 91-2000DIN EN ISO 7089Plain washers-Normalseries-Product grade A平垫圈 A级GB/T 97.1-2002DIN EN ISO 7090Plain washers,chamfered-Normal series-Productgrade A(ISO 7090:2000)平垫圈倒角型 A级GB/T 97.2-2002DIN EN ISO 7091Plain washers-Normalseries-Product grade C(ISO7091:2000)平垫圈 C级GB/T 95-2002DIN EN ISO 7092Plain washers-Smallseries-Product grade A(ISO7092:2000)小垫圈 A级GB/T 848-2002DIN EN ISO 7093-1Plain washers-Largeseries-Part 1: Productgrade A(ISO 70931-1:2000)大垫圈 A级GB/T 96.1-2002DIN EN ISO 7093-2Plain washers-Normalseries-Part 3: Productgrade C(ISO 70936-2:2000)大垫圈 C级GB/T 96.2-2002DIN EN ISO 7094Plain washers-Extra largeseries -Product gradeC(ISO 7094:2000)特大垫圈 C级GB/T 5287-2002DIN EN ISO 7040DIN 982|DIN 6924Prevailing torque typehexagon nuts (with non-metallic insert),style 1 -Property classes 5,8 and10(ISO 7040:1997)1型非金属嵌件六角锁紧螺母GB/T 889.1-2000DIN EN ISO 7042DIN 980|DIN 6925Prevailing torque typeall-metal hexagonnuts,style 2 - Propertyclasses 5,8, 10 and 12(ISO7042:1997)2型全金属六角锁紧螺母GB/T 6185.1-2000DIN EN ISO 7719Prevailing torque typeall-metal hexagonnuts,style 1- Propertyclasses 5,8 and 10(ISO7719:1997)1型全金属六角锁紧螺母GB/T 6184-2000DIN EN ISO 10511DIN 985Prevailing torque typehexagon thin nuts (withnon-metallic insert )(ISO10511:1997)非金属嵌件六角锁紧薄螺母GB/T 6072.2-2000DIN EN ISO 10512DIN 982|DIN 6924Prevailing torque typehexagon nuts (with non-metallic insert),style1,with metric fine pitchthread-Property classes6,8 and 10(ISO 10512:1997)1型非金属嵌件六角锁紧螺母细牙GB/T 889.2-2000DIN EN ISO 10513DIN 980|DIN 6925Prevailing torque typeall-metal hexagonnuts,style 2,with metricfine pitch thread -Property classes 8,10 and12(ISO 10513:1997)2型全金属六角锁紧螺母细牙GB/T 6185.2-2000。