Kestrel3000手持式风速仪-NK3000手持式气象仪

手持式示波器THS3000系列产品技术资料主要特点和优点主要性能指标100 MHz或200 MHz带宽型号高达5 GS/s的最大采样率，200 ps分辨率4条全面隔离的浮动通道600 V RMS CAT III, 1000 V RMS CAT II等级输入(BNC到接地)测量和分析21种自动测量波形数学运算和FFT频谱分析电压、时间、频率、功率光标测量应用功能TrendPlot TM记录测量数据波形通过/失败极限测试100屏自动显示屏记录程序易用功能6英寸(153 mm)明亮的彩色显示器USB设备端口和主控端口电池可连续工作7个小时应用嵌入式模拟和数字设计电源器件、电源电子和电源设计汽车和航空设计和维护工用设备设计和安装现场测试和服务产品技术资料4条隔离输入通道，简便地处理任何类型的混合信号输入。

便于携带，处理挑战性环境THS3000手持式示波器系列重量轻，拥有4条隔离通道，电池可连续工作长达7个小时，能够安全地在工作台或在现场进行浮动测量或差分测量。

现在，您可以获得预期泰克提供的优异性能，安全经济地处理棘手的环境。

准确地测量信号THS3000手持式示波器拥有高达200 MHz的带宽、4条通道和5 GS/s的最大采样率，没有任何其它示波器能够在这样一台便携式仪器中，提供如此高的带宽和采样率。

THS3000手持式示波器系列每条通道提供了10,000点的记录长度，可以以更高的采样率捕获更多的信号信息，清楚地查看信号细节。

对必需测量在长时间内变化的低速信号的应用，THS3000系列提供了滚动模式，把记录长度扩展到30,000点信号信息。

安全地进行浮动测量和差分测量在电源电子、电源半导体和其它电子应用上进行准确安全的测量，在信号参考点浮动或没有参考接地时可能极具挑战性。

在信号覆盖从低压到高压(kV)范围或必须使用保护技术，可能产生地面环路时，问题会变得非常复杂。

为实现浮动测量，THS3000系列在结构上不同于其它大多数示波器。

SKF Infrared ThermometerCMSS 3000-SLHeavy duty, long range, dual laser sighted non-contact infrared thermometerFeaturesDual point laser sighting • Adjustable emissivity• 50:1 Distance to spot size ratio• T emperature range: -60 °C • to +1,000 °C (-76 °F to +1,832 °F)Exceptional battery life • High and low alarm• MAX, MIN, DIF, AVG temperature displays • Amber back-light LCD display • High intensity white LED flashlight • Heavy duty magnet in base of handle • Hard case• IntroductionThere are many uses for this hand-held non-contact, infrared thermometer. Rugged and easy to use – just aim, pull the trigger, and read the temperature in less than a second.Measures surface temperatures of hot, hazardous, moving, or hard-to-reach objects safely without contact.The non-contact thermometer senses the thermal energyradiated from an object with an infrared detector. When pointed at an object, the infrared detector collects energy producing a signal that the microprocessor translates as a reading on the backlit display. As the trigger is squeezed, the objecttemperature is continuously measured by the infrared detector. This allows for fast and accurate real-time readings.This instrument features an extended temperature range -60 °C to +1,000 °C (-76 °F to +1,832 °F); dual laser sighting; bright large amber back-light LCD display; Maximum, Minimum, Difference (MAX-MIN) and “Lock” function for continuous temperature scanning; programmable High and Low audible alarms; selectable temperature units (°C or °F); low battery indicator and adjustable emissivity for more accuratetemperature measurements.LCD displayEmissivity“Lock” function for continuous temperaturescanningLaser functionON/OFF Surfacetemperature Set valueof emissivitySelectedtemperature unit (degrees Celsius/Fahrenheit)Battery lowindicator Scanning in progressDual laser sighting and distance to spot ratioDual Lasers provides easy aiming and defines the target area. The target area is highlighted at all distances with two laser dot markers. Laser 1 indicates one point of the measurement spot on one side of the target area to be measured and Laser 2 indicates the location of the diametrically opposed point on the other side of the measurement spot. At the focal point, where the spot size is the smallest, the dots line up vertically, rotating as the CMSS 3000-SL is moved closer or further from the target.EmissivityEmissivity is a term used to describe the energy-emittingcharacteristics of materials. Most organic materials and painted or oxidized surfaces have an emissivity of 0.95. Inaccurate readings can result from measuring shiny or polished metal surfaces. T o compensate for this, adjust the unit’s emissivity reading, or cover the surface to be measured with maskingtape or flat black paint (< +148 °C /+300 °F). Allow time for the tape or paint to reach the same temperature as the material underneath it. Measure the temperature of the tape or painted surface.Hard caseA water resistant, dust-proof case which holds the unit (and magnetic stand) and measures 330 mm x 197 mm x 66 mm (13.00” x 7.75” x 2.60”) is included.SKF Infrared Thermometer CMSS 3000-SLDistance to Spot Ratio 50:1.2.4” @ 120”0.06 m @ 3 mT arget areaLaser 2Laser 1Focal point1.6” @ 80”0.04 m @ 2 m SpecificationMeasurement range: -60 °C to +1000 °C (-76 °F to +1832 °F)Operating range: 0 to +50 °C (+32 °F to +122 °F)Accuracy (T object = 15-35 °C, T ambient = 25 °C): ± 1.0 °C (± 1.8 °F)Accuracy (T object =33-1,000 °C; T ambient = 23 ± 3 °C): ± 2% of reading or +2 °C (+4°F) whichever is greater Update frequency: 1.4 Hz Wave length response: 8-14 µmEmissivity range: 0.95 default – adjustable 0.1 to 1 step .01Relative humidity: 5% to 95% non-condensing Resolution (from -9.9 °C to +199.9 °C): 0.1 °C /0.1 °F Response time (90%): < 1 sec Distance spot ratio: 50:1Dimensions: 47.0 mm x 197.0 mm x 203.3 mm (1.85” x 7.71” x 7.9”Weight: 386.1 g (13.62 oz) including batteries Power: 2 x AAA batteries (included)Battery life: Typical 180 hours, min 140 hours continuous use (Alkaline, without laser and back light)Modes: Maximum, Minimum, Average, Difference (MAX-MIN), Lock (allows for continuous temperature scan)NOTE: Under an electromagnetic field of 3 V/m from 90 to 360 MHz themaximum error is ± 10 °C National Institute of Standards and T echnology (NIST), traceable factory calibration available.Ordering informationCMSS 3000-SL ••Non-Contact Infrared Thermometer,including quick start guide in standard languages (English, French, German, Portuguese, Spanish and Swedish), two AAA batteries and hard carrying case and magnetic stand.DOC-CAL CERT CMSS 3000, NIST Certificate of Calibration ••Accuracy (Watlow-Gordon XACT-CAL)Optional kits that include the SKF Infrared Thermometer, CMSS 3000-SLCMAK 400 SKF Basic Condition Monitoring kit • CMAS 100-SL SKF Machine Condition Advisor –CMSS 3000-SL SKF Infrared Thermometer –CMIN 400 SKF Inspector Ultrasonic Probe –CMAK 300 SKF Bearing Analysis kit• CMAS 100-SL SKF Machine Condition Advisor –CMSS 3000-SL SKF Infrared Thermometer –THEH1 SKF OilCheck–。

Accredited CalibrationQuality at EMC PARTNER is based on an ISO 9001 manage-ment system. This is the foundation for an ISO 17025 accredi-tation verified by the Swiss Calibration Service (SCS). SCS No. 146 is the accreditation number of EMC PARTNER AG. Locally accredited but recognized worldwide through affiliation with the ILAC organisationTHE ESD TESTING SOLUTIONPOWER AT YOUR FINGER TIPSElectrostatic Discharge (ESD) is the most common test procedure applied toany electronic or electrical equipment. Used extensively to test:›Commercial products›Industrial systems›Military electronics›Automotive electronics›Fuses and detonators›Railway electronics›Avionic equipment qualification›Telecom equipment›Electronic componentsThe easily changeable and fully calibrated discharge networks, quickly adaptESD3000 to the requirements of any new application.Light and easy to use.3EASIL Y EXPANDABLEESD3000 is designed with the user in mind. The modular design allows configuration ac -cording to customer wishes, addition of more networks when adding applications and easy extension from 16kV to 30kV using the same generator. Automatic network recognition means ESD3000 is always ready.ESD3000 + DMx ESD3000 + RM32 + DNxIncludedRechargable Long-life battteriesUp to 3 test tips (Sharp, Round, Corona)Charger & Firmware update cableHandy, robust carrying case4Discharge Modules (DMx)up to 16kV Air / 10kV Contact Discharges ESD3000 required Discharge Networks (DNx)up to 30kV Air- and Contact Discharges DM1 (150pF, 330 Ohm)DM2 (330pF / 2000 Ohm)DM4 (100pF / 1500 Ohm)DM6 (100pF / 1500 Ohm)DM7 (200pF / 0 Ohm)ESD3000 & RM32 required DN1 (150pF / 330 Ohm)DN2 (330 pF, 2000 Ohm)DN3 (150 pF, 2000 Ohm)DN4 (500 pF, 5000 Ohm)DN5 (500 pF, 500 Ohm)DN6 (330 pF, 330 Ohm)Available Extensions Available ExtensionsAVAILABLE MODULESCommercial & IndustrialIEC 61000-4-2 / ITU-T K.44ESD3000DM1 (150pF, 330 Ohm)ANSI / IEEE C63.16ESD3000 DM16A-C63H (150pF / 330 Ohm)ESD3000 DM16C-C63H (150pF / 330 Ohm)UL 991ESD3000DM32A-UL991 (100pF / 1000 Ohm)Component TestIEC 61340-3-1 / JEDEC 22-A114 / MIL-STD-750DESD3000DM6 (100pF / 1000 Ohm)IEC 61340-3-2 / JEDEC 22-A115ESD3000DM7 (200pF / 0 Ohm)AutomotivePSA B21 7110ESD3000DM2 (330pF / 2000 Ohm)ISO 10605 / SAEJSSI-IS/FORD AB/AC /GMW 3097ESD3000DN1(150pF / 330 Ohm)ESD3000DN2 (330pF / 2000 Ohm)ESD3000DN3 (150pF / 2000 Ohm)ISO 10605ESD3000DN6 (330pF / 330 Ohm)JASO D 001-94ESD3000DN32-CAR1 (150pF / 500 Ohm)Renault 32-10-001/D and 32-10-035/AESD3000DN32-CAR5 (330pF / 0 Ohm)MilitaryMIL-STD-883 / GR78-COREESD3000DM4 (100pF / 1500 Ohm)STANAG 4239 / ISO 14304 / MIL-STD-1512ESD3000DN4 (500pF / 5000 Ohm)MIL-STD-331C / MIL-DTL-23659D / STANAG 4239ESD3000DN5 (500pF / 500 Ohm)MIL-STD-1576ESD3000DN32-MIL2 (400pF / 150 Ohm)ESD3000DN32-MIL3 (500pF / 0 Ohm)5The original 30kV battery powered generator with a unique system of changeable modules. Flexibility and power combined.UNIQUE FEATURES Long life standard battery. Up to 8 hours on full battery charge. Readily available in any store.AA battery powered Add calibrated modules to maintain the system value. Unique modules and accessories for special applications. Extend testing capability Single key press switches polarity before and during the test.Electronic polarity changeErgonomic hand held tester without additional base unit. Program directly on generator.Compact solution6Technical Specifications7ESD3000 MODULES ESD3000M a i n f r a m e D M 1D M 2D M 4D M 6D M 7R M 32D N 1D N 2D N 3D N 4D N 5D N 6C A R 1C A R 5I N D 1M I L 2M I L 3A -C 63HC -63H U L 991IEC 61000-4-2✓✓✓ITU-T K20✓✓PSA B32 7110✓✓MIL-STD-883✓✓GR78-CORE ✓✓IEC 61340-3-1✓✓JEDEC 22-A114✓✓MIL-STD-750D ✓✓IEC 61340-3-2✓✓JEDEC22-A115✓✓✓ISO 10605✓✓✓✓✓✓DO-160 S25✓✓✓✓MIL-STD-461G CS118✓✓✓✓ GMW3100✓✓✓✓✓✓GMW3097✓✓✓✓STANAG4239✓✓✓✓ISO14304✓✓✓MIL-STD-1512✓✓✓✓MIL-STD-330C ✓✓✓✓JASO D 001-94✓✓✓Renault 32-10-001/D ✓✓ABD0100.1.2✓✓✓Special MIL ✓✓✓MIL-STD-1576✓✓✓ANSI C63.16✓✓✓UL991✓8ACCESSORIES FOR DIFFERENT MODULES ESD3000M a i n f r a me D M 1D M 2D M 4D M 6D M 7R M 32D N 1D N 2D N 3D N 4D N 5D N 6C A R 1C A R 5I ND 1M IL 2M IL3A -C 63HC -63HEARTH CABLE ✓IEC IECESD-VCP50✓IEC IECESD-TARGET2✓IECESD-TARGET2 DN ✓ISO ISO ISO ISOESD-VERI-V ✓✓O O O ✓O O ✓✓O O O ✓✓✓✓ESD-STAND ED2✓O O O O O O O O O O O O O O O O O O O ESD-HCP-AUTO ✓ISO ISODM-EXT ✓MIL MILSAFETY-S ✓MIL MILTC-MIG24 ED ✓MIL MILESD3000 CNH12✓O O O O O OOPTOLINK ✓O O O O O O O O O O O O O O O O O O O TEMA ✓O O O O O O O O O O O O O O O O O O O Overview ESD3000 | Modules | Accessories 91. ESD3000 MAINFRAME AND MODULES1.1. TECHNICAL SPECIFICATIONS ESD3000 MainframeTo be used with modules all modules from this document are compatible Construction fully portable, no additional basic unitControl LCD and 6 menu buttons, 1 trigger button Maximum voltage 16 kV or 30 kV, depending on modules chosen Voltage steps 100 V - testDischarge polarity positive, negative, alternatingDischarge modes contact discharge (CD) and air discharge (AD)Discharge frequency CD max. 20 Hz, (pulse every 0.05, 0.1, 0.2 … 99 s)Discharge frequency AD ≥ 30 Hz or more, for ex. with DM1, DN1, other Counter pre-selectable, 1 to 29999Discharge detection selectable, count pulses or count discharges Holding time ≥ 5 sTrigger manual, automatic, remote Ramps voltage, polarityReporting with TEMA automatic report sequence, amplitude,polarity Dimensions for ex. withDM1 and tip 340 x 130 x 70 mm Weight mainframe 730 g, w/o battery pack and module Weight equipped 1050 g, with battery pack, DM1 and AD tip Power supply 10 x AA rechargeable batteries or mainsIncluded 10 batteries, mains adapter, ground cable 2 m, 3 test tips (AD, AD2, CD), carrying case, RS232 cable, E3Loader for remote control Requires at least a DM module, or a DN module + RM32ESD3000DM1Standards IEC 61000-4-2 (latest), ITU-T K.20,Other standards MIL-STD-461G CS118, DO-160 Section 25Storage capacitor 150 pF ± 10 %Discharge resistor 330 Ω ± 10 %Voltage range AD 0.2 – 16 kV ± 5 %Voltage range CD 0.2 – 10 kV ± 5 %Current rise time into 2 Ω0.8 ± 25 %First I peak into 2 Ω CD 7.5 A @ 2 kV – 37.5 A @ 10 kV (± 15 %)Current at 30 ns 4 A @ 2 kV – 20 A @ 10 kV (± 30 %)Current at 60 ns 2 A @ 2 kV – 10 A @ 10 kV (± 30 %)Optional ESD-TARGET2Overview ESD3000 | Modules | Accessories10ESD3000DM2Standards PSA B32 7110 up to 16 kV / 10 kVStorage capacitor330 pF ± 10 %Discharge resistor2000 Ω ± 10 %Voltage range AD0.2 – 16 kV ± 5 %Voltage range CD0.2 – 10 kV ± 5 %Current rise time into 2 Ω0.7 – 1 nsFirst I peak into 2 Ω CD7.5 – 30 A ± 10 %RC time constant600 ± 130 nsESD3000DM4Standards MIL-STD-883, GR78-COREStorage capacitor100 pF ± 10 %Discharge resistor1500 Ω ± 10 %Voltage range AD0.2 – 16 kV ± 5 %Voltage range CD0.2 – 10 kV ± 5 %Current rise time into 2 Ω<********–8kVI peak into 2 Ω (CD) 2.66 A @ 4 kV, 3.33 A @ 5 kVESD3000DM6Standards IEC 61340-3-1, JEDEC 22-A114,MIL-STD-750DStorage capacitor100 pF ± 10 %Discharge resistor1500 Ω ± 10 %Voltage range CD0.25 – 8 kV ± 10 %Current rise time into 2 Ω2–*********–8kVRC time constant150 ± 20 nsESD3000DM7Standards IEC 61340-3-2, JEDEC 22-A115Storage capacitor200 pF ± 10 %Discharge resistor0 Ω ± 10 %Voltage range CD0.1 – 2 kV ± 5 %Current into short circuit 1. 7 A – 35 A ± 15 % into short circuit (< 1 Ω)Current waveform as per IEC 61340-3-2 into SC (< 1 Ω)Current ringing frequency11 – 16 MHz @ 0.1 – 2 kV into SC (< 1 Ω)ESD3000DM32A-UL991Standard UL991, paragraph 15.2.2Storage capacitor100 pF ± 10 %Discharge resistor1500 Ω ± 5 %Discharge mode AD only, consists of DM+ and DM- modulesVoltage range AD 4 – 30 kV ± 5 %Rise time at 4 kV, 20 kV< 5 nsRC const. at 4 kV, 20 kV150 ns ± 20 %Overview ESD3000 | Modules|Accessories1130 KVThese Extensions need the Module ESD3000RM32ESD3000DN1Standards IEC 61000-4-2,ISO 10605Other standards MIL-STD-461G CS118, DO-160 Section 25Storage capacitor150 pF ± 10 %Discharge resistor330 Ω ± 10 %Voltage range AD 1 – 32 kV ± 5 %Voltage range CD 1 – 30 kV ± 5 %Current rise time into 2 Ω0.8 ± 25 %First I peak into 2 Ω CD7.5 A @ 2 kV – 112.5 A @ 30 kV (± 15 %)Current at 30 ns 4 A @ 2 kV – 60 A @ 30 kV (± 30 %)Current at 60 ns 2 A @ 2 kV – 30 A @ 30 kV (± 30 %)Requires ESD3000RM32Included in ESD3000RM32Detachable module for faster tr (<700ps)Optional ESD-TARGET2 DN, ESD-HCP-AUTOESD3000DN2Standards ISO 10605, GMW3100, GMW3097Storage capacitor330 pF ± 10 %Discharge resistor2000 Ω ± 10 %Voltage range AD 2 – 30 kV ± 5 %Voltage range CD 2 – 30 kV ± 5 %Current rise time into 2 Ω0.7 – 1 nsFirst I peak into 2 Ω CD7.5 A @ 2 kV – 112.5 A @ 30 kV (- 0 / + 30 %) RC time constant600 ± 130 nsRequires ESD3000RM32Optional ESD-TARGET2 DNESD3000DN3Standards ISO 10605, GMW3100, GMW3097Storage capacitor150 pF ± 10 %Discharge resistor2000 Ω ± 10 %Voltage range AD 2 – 30 kV ± 5 %Voltage range CD 2 – 30 kV ± 5 %Current rise time into 2 Ω0.7 – 1 nsFirst I peak into 2 Ω CD7.5 A @ 2 kV – 112.5 A @ 30 kV (- 0 / + 30 %) RC time constant300 ± 60 nsRequires ESD3000RM32Optional ESD-TARGET2 DNOverview ESD3000 | Modules|Accessories12ESD3000DN4Standards STANAG4239, ISO14304MIL-STD-1512, MIL-STD-330Storage capacitor500 pF ± 10 %Discharge resistor5000 Ω ± 10 %Voltage range CD 2 – 30 kV ± 5 %I rise time into 2 Ω CD0.7 – 1 nsRequires ESD3000RM32Optional ESD3000 SAFETY-S, DM-EXT,TC-MIG24EDESD3000DN5Standards STANAG4239, MIL-STD-1512, MIL-STD-330Storage capacitor500 pF ± 10 %Discharge resistor500 Ω ± 10 %Voltage range CD 2 – 30 kV ± 5 %I rise time into 2 Ω CD0.7 – 1 nsRequires ESD3000RM32Optional ESD3000 SAFETY-S, DM-EXT,TC-MIG24EDESD3000DN6Standards ISO 10605, GMW3100Storage capacitor330 pF ± 10 %Discharge resistor330 Ω ± 10 %Voltage range AD 2 – 30 kV ± 5 %Voltage range CD 2 – 30 kV ± 5 %Current rise time into 2 Ω0.7 – 1 nsRC time constant300 ± 130Requires ESD3000RM32Optional ESD-TARGET2 DN, ESD-HCP-AUTOSPECIALESD3000DN32-CAR1Standard JASO D 001-94Storage capacitor150 pF ± 10 %Discharge resistor500 Ω ± 10 %Voltage range AD 2 – 30 kV ± 10 %Voltage range CD 2 – 30 kV ± 10 %I rise time into 2 Ω CD0.8 ± 25 %First I peak into 2 Ω AD< 5 nsRC time constant300 ± 60 nsRequires ESD3000RM32Optional ESD-TARGET2 DNOverview ESD3000 | Modules|Accessories13ESD3000DN32-CAR5Standard Renault 32-10-001/DApplication testing airbag initiatorsStorage capacitor330 pF ± 10 %Discharge resistor0 Ω ± 10 %Source impedance Rt< 30 ΩVoltage range AD 2 – 16 kV ± 5 %Voltage range CD 2 – 16 kV ± 5 %Requires the module is already integrated in RM32 ESD3000DN32-IND1Standard ABD0100.1.2, IEC801-2Storage capacitor150 pF ± 10 %Discharge resistor150 Ω ± 10 %Voltage range AD 2 – 30 kV ± 5 %Voltage range CD 2 – 30 kV ± 5 %I rise time into 2 Ω CD0.7 – 1 nsRC time constant30 ns ± 30 %Requires ESD3000RM32ESD3000DN32-MIL2Standards special military requirementStorage capacitor400 pF ± 10 %Discharge resistor150 Ω ± 10 %Voltage range AD 2 – 30 kV ± 5 %Voltage range CD 2 – 30 kV ± 5 %I rise time into 2 Ω CD0.8 ± 25 %Requires ESD3000RM32ESD3000DN32-MIL3Standard MIL-STD-1576Storage capacitor500 pF ± 10 %Discharge resistor0 Ω ± 10 %Voltage range CD 2 – 30 kV ± 5 %Requires ESD3000RM32ESD3000DM16A-C63HStandard ANSI C63.16 (AD requirement)Storage capacitor150 pF ± 10 %Discharge resistor330 Ω ± 10 %Voltage range AD 2 – 16 kV ± 5 %Requires-Overview ESD3000 | Modules|Accessories14ESD3000DM16C-C63HStandard ANSI C63.16 (CD requirement)Storage capacitor150 pF ± 10 %Discharge resistor330 Ω ± 10 %Voltage range CD 2 – 16 kV ± 5 %Requires-1.2. POWER, CLIMATIC CONDITIONS, SHIPPING WEIGHT, DIMENSIONSESD3000 mainframeMains adapter95 – 250 V (50/60 Hz)Power consumption ON < 20 VA, standby < 5 VATemperature range15 – 35 °CHumidity30 – 60 % non-condensingAir pressure86 – 106 kPaShipping weight 2.4 kg plus selected modulesCarrying case dimensions46 x 41 x 17 cmIncluded in deliveryUser manual with conformity declarationCalibration certificate factory calibration for selected modules2. ACCESSORIES FOR ESD30002.1. TECHNICAL SPECIFICATIONSEARTH CABLEApplication connection of HCP or VCP to ground planeImpedance 2 x 470 kΩLength 2 mConnectors 2 x banana plugsOverview ESD3000 | Modules|Accessories15ESD-VCP50Application indirect ESD application as per standardSpacer in between10 cm wooden spacerCoupling plane50 x 50 cmApplication points one on each sideDimensions50 x 50 x 10 cmWeight8 kgIncluded 2 m earth cable (with 2 x 470 kΩ)ESD-TARGET2Standard IEC 61000-4-2 latestApplication current target for calibration of ESD generator Input impedance 2 ΩInput voltage max. 10 kV CDFrequency range± 0.5 dB up to 1 GHz, ± 1.2 dB up to 4 GHzCurrent range0 – 50 A standard, could be extendedTransfer function0.2 V / 1 A with 20 dBDiameter70 mmThickness40 mmWeight398 g including attenuatorFixing8 x M3 screws, included in deliveryIncluded20 dB att., 50 Ω coax. cable (1 m) with BNC out ESD-TARGET2 DNStandard IEC 61000-4-2 latestApplication current target for calibration of ESD generator Input impedance 2 ΩInput voltage max. 30 kV CDFrequency range± 0.5 dB up to 1 GHz, ± 1.2 dB up to 4 GHzCurrent range0 – 120 A standard, could be extendedTransfer function0.2 V / 1 A with 20 dB, 0.02 V / 1 A with 40 dB Diameter70 mmThickness40 mmWeight398 g including attenuatorFixing8 x M3 screws, included in deliveryIncluded40 dB att., 50 Ω coax. cable (1 m) with BNC out ESD-VERI-VApplication target for ESD DC voltage measurementInput impedance20 GΩ || 3 pFInput voltage range0 – 32 kVOutput voltage range0 – 1.6 VOutput connector BNCDimensions17 cm height, 5.5 cm diameterWeight433 gIncluded earth conductorOverview ESD3000 | Modules|Accessories16ESD-STAND Ed2Application stand for supporting ESD gun, fixed point testHeight50 – 180 cm, adjustablePosition360˚ adjustableDimensions64 x 17 x 12 cm (packed)Weight 4 kgIncluded cable holder for calibrationESD-HCP-AUTOApplication coupling plane as per ISO 10605 annex FLength1500 mmInsulation distance50 mmTest level8 – 20 kV, as per standardDimensions180 x 120 x 5 cmWeight 2.2 kgIncluded EARTH CABLEESD3000DM-EXTApplication 1 m extension cable for ESD3000 modulesCompatibility DM and DN modulesCable length 1 ± 0.05 mWeight0.5 kg including accessoriesCan be used with DN modulesESD3000 SAFETY-SStandard MIL-STD-1512Application safety switch for testing explosive devicesVoltage max. 30 kV CDDimensions20 x 16 x 12 cmWeight 2 kg including accessoriesIncluded mains adapterTo be used with ESD3000DM-EXT, TC-MIG24 EDTC-MIG24 ED for testing explosive devicesApplication test cabinetVoltage insulation max. 36 kVEUT dimensions max. 30 x 30 x 20 cmEUT weight max. 5 kgSafety circuit door interlockSignal lamps red and green lamps built-inControl of signal lamps for example with ESD3000 SAFETY-SDimensions47 x 43.5 x 25.4 cmWeight8 kgIncluded connection cable 25pol/ESD3000 SAFETY-SOverview ESD3000 | Modules|Accessories17ESD3000 CNH12Application Magnetic field loop for ESD3000 test system Loop diameter12 cmLoop current allowed> 100 ADischarge mode selection contact discharge (CD)Current at 15 kV setting50 A, with RM32 and DN1Current at 30 kV setting108 A, with RM32 and DN1Dimensions33 x 13 x 1 cmWeight0.2 kg including accessoriesRequires ESD3000RM32, ESD3000DN1or other DNESD3000-OPTOLINKApplication(insulating) optical cable ESD3000 - computer Length10 mInterface RS232, requires USB adapterBaud rate9600 bpsWeight0.2 kgIncluded tranceiver with mains adapterRequires USB-RS 232 ADAPTERUSB-RS232 ADAPTERApplication adapter between RS232 and USB interfac-esAdapter type Passive, no power supplyInput RS232 maleOutput USBCable length0.35 mWeight0.2 kgTEMAApplication control software for ESD3000 systemLicense 1 license for 1 generatorCapabilities with ESD3000Sequences, reporting, remote controlCompatibility Windows XP, 7, 8, 10Requires ESD3000-OPTOLINK, USB-RS 232 ADAPTEROverview ESD3000 | Modules|Accessories18THE EMC PARTNER PRODUCT RANGE Find further brochures on our website /brochures or contact your local representative for a hardcopy.LIGHTNING TESTSImpulse test equipment and accessories for aircraft, military and tel -ecom applications. Complete solutions for RTCA / DO-160 and EURO -CAE / ED-14 for indirect lighting on aircraft systems, MIL-STD-461 tests CS106, CS115, CS116, CS117, CS118 and Telecom, ITU-T .K44 basic and enhanced tests for impulse, power contact and power induction.COMPONENT TESTSImpulse generators for testing; varistors, gas discharge tubes (GDT),surge protective devices (SPDs), X / Y capacitors, circuit breakers,electricity meters, protection relays, insulation material, suppressor diodes, connectors, chokes, fuses, resistors, emc-gaskets, cables, etc. EMISSION MEASUREMENTSMeasurement of Harmonics and Flicker in 1-phase and 3-phaseelectrical and electronic products according to IEC /EN 61000-3-2 and 61000-3-3 . HARCS Immunity software adds interharmonic tests, voltage variation according to IEC/EN 61000-4-13, -4-14.IMMUNITY TESTSTransient Test Systems for all EMC tests on electronic equipment. ESD, EFT, surge, AC dips, AC magnetic field, surge magnetic field, commonmode, damped oscillatory and DC dips. According to IEC and EN 61000-4-2, -4, -5, -8, -9, -10, -11, -12, -13, -14, -16, -18, -19, -29.SYSTEM AUTOMATIONA full range of accessories enhance the test systems. Test cabinets, test pistols, adapters and remote control software, simplify interfacing with the EUT. Programmable PSU, EMC hardened for frequencies from 16.7Hz to 400Hz. PS3-SOFT-EXT complies with IEC / EN 61000-4-14 and -4-28.SERVICEOur committment starts with a quality management system backing up our ISO 17025 accreditation. With the SCS number 146, EMC PARTNERprovide accredited calibration and repairs. Our customer support teamare at your service!。

KY3000温度自动检定系统使用手册北京凯航伟业科技有限公司KY3000温度自动检定系统使用手册第一章简介KY3000温度自动检定系统是由计算机、打印机、高精度数字万用表、 KY3000型低电势扫描器/控制器、信号源(选购件)、GP-IB(IEEE-488) 接口等组成的自动测试、控制系统，是集计算机技术、微电测技术和自动测试技术于一体的新型智能化计量标准装置，用于自动检定各种工作用热电偶、热电阻,配以适当的软件可以辅助检定温度二次仪表、膨胀式温度计。

此外，我公司还专门为本系统设计了S型标准热电偶检定软件（需另购）。

检定程序及结果均符合国家有关现行计量检定规程。

系统具有设计先进、结构合理、软件功能齐全、操作方便、界面美观大方、量值传递准确可靠、抗干扰能力强、组态灵活等一系列突出特点。

系统中的检定软件及核心硬件均由我公司独立开发。

一二三.系统特点1.KY3000低电势扫描器/控制器特点KY3000低电势扫描器/控制器的主要功能是提供符合检定规程要求的，可程控的低电势多通道开关、恒温设备（检定炉、油槽）温度控制通道以及参考端温度测量通道。

⏹扫描器部分特点●机电一体化结构。

既继承了传统低电势开关的各种优点，又很好地实现了程控、遥控功能。

●寄生电势小。

优良的开关性能, 开关基片采用大面积敷银材料,寄生热电势长期保证不超过±0.2μV。

●开关接触电阻小且一致性好。

●高可靠性，长期使用不必更换。

●专用低电势接线端子。

●兼容热电偶与热电阻的接线。

四线制电阻测量法彻底消除外接引线电阻。

⏹控制器部分特点●自带执行机构。

使用具有光电隔离功能的大功率固态继电器（SSR），控制热电偶检定炉（或恒温油槽），体积小、重量轻、发热量小、结构简单，从而使其工作可靠性大大提高。

●高精度交流过零触发,无高次谐波干扰,功率输出相对分辨率优于1/1024，为精密温度控制提供了必要的基础条件。

●完善的供电回路保护措施。

⏹参考端温度测量部分特点●检定廉金属热电偶(如K、 N、 J、 E等分度号)时,允许选择”参考端温度补偿”功能,提供三种可选择的参考端处理方法。

防雷产品雷击中华人民共和国香港中环广场澳大利亚悉尼中心塔新西兰奥克兰天空塔各种接闪器3ERITECH ®SYSTEM 3000什么是 ERITECH ® SYSTEM 3000?ERITECH ® SYSTEM 3000 是一种技术先进的防雷系统。

该系统独一无二 的特征可确保可靠的雷电截获和控制。

ERITECH ® DYNASPHERE 接闪器为雷电放电提供最佳点，否则雷电放电会袭击和破坏未受保护的建筑物和/或建筑物内的设施。

ERITECH DYNASPHERE 以最佳的方式与 ERITECH ® ERICORE 引下线及低阻抗接地 系统相连，从而组合成一个完整的防雷系统。

ERITECH SYSTEM 3000 包含以下部件:• ERITECH DYNASPHERE 接闪器 • ERITECH ERICORE 引下线 • 雷电事件计数器• 为特定目的设计的低阻抗接地系统。

所有这些部件构成了艾力高® (ERICO ®) 六点防雷计划一个不可 或缺的部分。

每个部件必须单独考虑，并最终组合成完整的防雷系统。

如果没有这样的组合，任何防雷系统的作用都将是有限的。

虽然可以使用其他部件组合成混合系统，但是必须认识到任何替代品 的低效率代表着整个防雷系统的低效率。

目前尚没有可防止雷电放电发生的已知方法。

防雷系统的目的是控制放电通路，从而防止人员伤害或财产损坏。

应当在建筑物设计的早期阶段评估防雷需求。

引下线鞍座雷电事件4艾力高® (ERICO ®) 对防雷方法 进行了数年的长期现场研究。

在研究过程中，使用了实验室试验 (借助一些最大的户外试验实验室) 以及无数的研究项目，包括与业界知名科学家的合作。

这种广泛的研究成就了一些最新的技术论文及刊物。

艾力高 (ERICO) 致力于制定各种适合全球的防雷标准。

ERITECH ® SYSTEM 3000 从这种研究活动中得到了进一步发展，与先前版本的 ERITECH SYSTEM 3000 相比，凭借广泛的现场研究、领先的室内外高压试验以及计算机模型研究 支持，可为建筑群提供最 先进的革新。