下载文档原格式
用数据线和iTunes传输文件限制较多，有时候不太方便。
Wi-Fi传输限制较少，只要有无线网络就能传输，不需要数据线连接新安装的几个文档处理工具和视频播放器Oplayer HD都可以用这个方法，方法大同小异，这里以GoodReader为例说明确保电脳和iPad处于GoodReader和IE浏览器此方法在集团无线网络环境不可用在GoodReader 首页下方有个无线网络图标，点击如图现在可以通过WiFi 链接到您的iPad 查看相关说明.请便用下甜 1. IP •地址 2. Boniour-zfiilE:注直.为了防止鸿络断开，设命的自谕倾定己经关闭•当您看到这个窗口的时侯，勿的iPad 不歩 保推充电伏杰.我的文档> 连接到服务器>预览> 查找文件WiFi 传输12:59WiFi 状态：开 连接状态：已链接 7/192.168.1.100:808© 2009 Good.iWare Ltd.联系我们 在电脑IE 浏览器输入上一张图中间红线位置标示的IP 地址，回车确认, 进入下图。
（图中为Win7版IE9,其他版本此界面略有差异）尽管您能够用网页浏览器来上倍文件、但是这不是最好的方法一它一次只能处理一个文件、并且不能移动、重命名・删除文件或文件夹・ 如果需要完全控制（传输整个目录、重命名或刪踪文件等.）您必须连接你的iPad 作为一个网络文件夹… 在我们的帮助页面有详细的说明.我设备上的文件/名称 修改日期 大小迭择要上传的文件:输入目录名:创建目录Browse …我设备上的文件/名称修改日期大小S 0119 - 三岂0119 - FactSheetChina.EN@ 2011年度投资屋望’ Bio.Ricky Lin(CN)3 Citibank Smart Banking_(HZ)电DSCF0174區DSCF0183圃Hangzhou press release.CHHangzhou press release.eng/nal.倉Choose File to Upload►杭州MP4的▼|翳杭州MP4 彝P 慈▼新鼓件夹归▼ a ©同图片IB诽』育乐修改日期2011/1/19 10:20PDF2011/1/19 10:20PDF2011/1/20 15:41PDF2011/1/20 15:58PDF2011/1/20 17:53M!c2011/1/20 18:22JPG2011/1/20 18:22JPG2011/1/20 17:54PDF2011/1/20 17:54PDFBrouse・・・' 名称nr文件名(N):•下栽疵黨面込最近访问的位置耳库-* r选择要上传的文件:All Files (*.*)打开(O) ”选择好文件后，点击上传文件。
Pro-Face触摸屏操作说明一．触摸屏程序的传送：1.工程的传送1).传送的设置从工程管理器或画面编辑器里,选择“传送”命令,出现“Transfer Settings”对话框.[Send Information]Upload Information 是否传送“上载信息”到GP. 没有“上载信息”将不允许GP→计算机的传送.GP System Screen 是否传送“GP系统设置”.建议[Gp Setup]做好设置,进行系统参数传送.Filing Data(CF Data) CF的配方数据传送.[Send To]&[Communications Port]选择通过串行口或者Ethernet传送、以及相应的传送参数(计算机上使用的COM口及速度等).[Transfer Method]Send All Screens 传送所有画面.Automatically Send Changed Screens 传送上次传送以来修改过的画面.(推荐)Send User Selected Sreens 传送选择的画面.[Setup]Automatic Setup 自动.如果没有系统则自动传送.(推荐)Force System Setup 强制.建议系统软件升级时执行.Do not Perform Setup 不执行.Simulation 用计算机模拟PLC的功能.如果需要使用模拟功能,必须选择此项并进行传送.如果要恢复正常与PLC的通讯,必须去掉此项再次进行传送.Setup CFG file GP OFFLINE菜单的语言.2).Password 口令保护传送时可以设置一个传送保护口令,同时限制画面数据的下载和上载.2. 从计算机传送画面到GP 简称“下载”.传送之前,会有编译检查过程.如果检查有错误,将不能下载.3. 从GP传送画面到计算机. 简称“上载”.如果GP里没有“上载信息”,将不允许GP→计算机的传送.有“上载信息”时,还可能进行传送口令保护.4. 模拟1)模拟步骤模拟功能可以在没有PLC的情况下,用计算机模拟PLC与GP 进行通讯,以便调试画面程序.过程: 如果需要使用模拟功能,必须选择simulation并进行传送.从工程管理器菜单或者工具栏按钮启动“simulate”.这时将自动进行simulation的检查.如果没有传送simulation选项,不能进入下一步.在simulation窗口里,通过“start”“stop”按钮或菜单命令,可以方便地开始、停止模拟功能.如果要恢复正常与PLC的通讯,必须去掉simulation并再次进行传送.2)模拟窗口的画面说明可以模拟画面号、模拟切换画面、选择数据输入/显示格式、开始/结束模拟、退出模拟、以及模拟各种内容,显示当前画面中Tag、部件的信息和状态,显示或改变系统数据区.二．画面说明：1．触摸屏一带电即进入“初始画面”，显示华能自控集团信息和电站名称，系统时间等内容。
如何在相机和电脑之间传输照片摄影已成为现代人重要的兴趣和方式，而在我们使用数码相机拍摄出完美照片之后，将照片传输到我们的电脑上成为一项必要的任务。
相机和电脑之间的照片传输虽然看似繁琐，但只要掌握正确的方法和技巧，就能实现高效、方便地完成。
本文将为您介绍几种常用的相机和电脑之间传输照片的方法。
一、USB连接传输首先，最常见的传输方式是通过USB连接。
这种方式非常简单，只需将相机与电脑通过USB数据线连接即可。
以下是具体步骤：1. 打开相机和电脑，确保两者处于开机状态。
2. 使用相机附带的USB数据线将相机连接到电脑的USB接口上。
3. 在相机屏幕上选择“传输”或“连接到电脑”等选项。
4. 电脑会检测到相机的连接，对应的照片文件夹将自动弹出。
5. 在电脑上打开照片文件夹，将照片复制或移动到电脑的指定文件夹中。
通过USB连接传输照片具有稳定、快速的特点，但需注意使用适配的USB数据线，否则可能会导致传输失败或速度过慢。
二、存储卡读卡器传输第二种传输方式是通过使用存储卡读卡器。
这种方法适用于没有USB连接或USB传输不稳定的相机，以及无法通过USB连接的特殊设备，如无人机相机等。
以下是具体步骤：1. 关闭相机，并取下存储卡（通常为SD卡）。
2. 将存储卡插入存储卡读卡器中。
3. 将存储卡读卡器插入电脑的USB接口。
4. 电脑会自动检测到存储卡读卡器的连接，并弹出照片文件夹。
5. 在电脑上打开照片文件夹，将照片复制或移动到指定文件夹中。
通过存储卡读卡器传输照片不仅快速稳定，还可以减少相机电池的消耗，提高相机的使用寿命。
三、Wi-Fi传输现在，很多数码相机都配备了内置Wi-Fi功能，通过Wi-Fi传输照片成为一种趋势。
以下是具体步骤：1. 确保相机和电脑都连接同一个Wi-Fi网络。
2. 在相机的菜单或设置中打开Wi-Fi功能。
3. 在电脑上打开Wi-Fi设置，搜索并连接到相机的Wi-Fi信号。
4. 在相机上启动照片传输功能，并找到Wi-Fi传输选项。
怎么用ipad和电脑互传文件有时候需要在 iPad 与电脑之间互传一些数据，如照片、视频，文件等，那么怎么用ipad 和电脑互传文件呢?今天店铺与大家分享下用ipad 和电脑互传文件的具体操作步骤，有需要的朋友不妨了解下。
用ipad 和电脑互传文件方法用IPAD和电脑互传文件可以通过数据线直接进行文件转移。
以下为从IPAD应用内将文件导出到电脑的方法：在电脑上下载安装pp助手以及iTunes。
将IPAD连接电脑，打开pp助手等待软件连接。
点击文件,选择对应应用文件夹中的Documents文件夹(一般应用中缓存文件夹)(如下图)。
将对应文件拖到到电脑桌面完成导出。
(导入IPAD方法类似)把电脑上的文件传到ipad方法一、通过邮件将文件导入iPad1这种方法需要我们事先在 iPad 上配置相应的邮件帐户。
在 iPad 上的设置-邮件、通讯录、日历中可以添加邮件帐户2把我们想要导入iPad 的文档先通过邮件的方式发送到iPad 上的邮箱。
在邮箱中找到想要导入的附件文档3用手指长按住邮件附件中的文档，就会有菜单选项弹出。
这里以iOS 办公软件 Pages 为例，点击“Pages”图标4然后就会看到 Pages 应用程序正在导入我们邮箱中的文档5最后就可以在 Pages 中打开该文档了方法二、利用百度云来导入文件1除了可以用邮件附件的方式来将文档导入iPad 以外，我们还可以用第三方应用程序来导入文档。
这里要用到的是百度云网盘，如果iPad 上没有百度云的话，可以去 App Store 应用中心下载安装即可。
2我们可以先通过网页版百度云把文件先上传到百度云网盘。
打开百度云网页地址：，登录我们的百度帐户。
点击上传按钮，选择要上传的文档3然后我们打开iPad 上的百度云，找到上传的文档。
点击该文档可以预览我们的文档4然后点击如图标注的按钮，打开菜单选项，选择我们相应的应用程序方法三、用 iTunes 来导入文档1最后一种方法用iTunes 软件来把我们的文档导入到iPad 中。
pcmover pro用法PCmover Pro是一款功能强大的数据迁移工具，它可以帮助用户在不同的电脑之间快速、轻松地迁移文件、设置和应用程序。
它的使用方法非常简单，下面我将为您详细介绍PCmover Pro的用法。
首先，您需要下载并安装PCmover Pro软件。
您可以在官方网站或可信赖的软件下载网站上找到PCmover Pro的安装包，然后按照安装向导的步骤进行安装。
安装完成后，打开PCmover Pro软件。
在主界面上，您将看到几个选项，如“开始迁移”、“恢复”、“高级设置”等等。
根据您的需求，选择相应的选项来进行操作。
如果您要使用PCmover Pro进行新电脑的设置迁移，点击“开始迁移”选项。
接下来，您将看到一个“源电脑”和一个“目标电脑”的选项。
选择目标电脑是您要迁移数据和设置的电脑。
接着，选择源电脑，这是您要迁移数据和设置的电脑。
一旦您选择了源电脑和目标电脑，PCmover Pro将开始扫描源电脑上的文件、设置和应用程序。
完成扫描后，您可以选择要迁移的内容，包括文件、设置和应用程序。
您还可以选择性地将特定的文件或应用程序排除在迁移范围之外。
在选择迁移内容之后，PCmover Pro将开始自动迁移您选择的文件、设置和应用程序到目标电脑上。
整个迁移过程可能需要一些时间，具体时间取决于您选择的内容量和计算机性能。
一旦迁移完成，PCmover Pro会生成一份详细的报告，告诉您迁移过程中是否有任何错误或警告。
您可以查看报告，以确保所有内容都已成功迁移。
另外，如果您需要恢复备份的数据和设置，可以选择“恢复”选项。
PCmover Pro将引导您选择之前创建的备份，并将其恢复到目标电脑上。
总的来说，PCMover Pro是一款强大而简单易用的数据迁移工具。
无论您是要迁移到新电脑，还是需要恢复备份，PCmover Pro都可以帮助您完成这些任务。
希望以上介绍对您有所帮助！。
Pro-face/Xycom Workstation Recovery Media Software Installation Instructions forMicrosoft® Windows® 2000Revision Description DateA Manual Released 8/01B Boot floppy disk creation steps added 4/04C Service Pack 4 installation instructions added 8/04D Additional installation instructions added. 10/06E Name change, correct where applicable with document 4/07Trademark InformationXycom and Xycom Automation are trademarks of Xycom Automation, L.L.C.Xycom Automation, L.L.C. now is referred to as Pro-face through a D.B.A. The Pro-face name and logo will replace the Xycom name and logo on all documents where possible.Pro-face is a trademark of Digital Electronics Corporation.Brand or product names may be registered trademarks of their respective owners. Windows® is aregistered trademark of Microsoft Co the United States and other countries.Copyright InformationThis document is copyrighted by Xycom Automation, L.L.C. (Xycom) and shall not bereproduced or copied without expressed written authorization from Xycom Automation, L.L.C.The information contained within this document is subject to change without notice. Pro-facedoes not guarantee the accuracy of the information.NoteThis document is only applicable to units sold with an OS installed by Pro-face. In other words, if the recovery media CD is not labeled as “Recovery Media” for “Software:“XA_WIN_2K_PRO” or “XA_WIN_2K_PRO_wSP4” then Pro-face didn’t install the OS.The XA_WIN_2K_PRO or XA_WIN_2K_PRO_wSP4 CD DISK, shipped in the documentation kit that came with your unit, will be used for reinstalling Microsoft® Windows® 2000 on yourPro-face/Xycom Industrial PC. This will only be necessary in a few cases, including: • the hard drive on your unit has failed• you are replacing your hard drive as part of your preventive maintenance programNoteMicrosoft® Windows® 2000 can be reinstalled using the bootable CD-ROM on yourPro-face/Xycom unit, or you can create a set of backup boot floppy disks and use the disks for reinstalling Windows® 2000.This procedure will reinstall Windows® 2000 on your Pro-face/Xycom computer. Drive C will be re-formatted as part of this process, and any data files on that drive will be destroyed. You are urged to make copies of any data files on drive C.The Pro-face Recovery Media labeled XA_WIN_2K_PRO or XA_WIN_2K_PRO_wSP4 is a bootable CD disk, which will simplify the reinstallation process on computers with bootable CD-ROM compatible drives. Most Pro-face/Xycom computers ordered with CD-ROM drives support this option. If your Pro-face/Xycom Industrial PC was ordered with a CD-ROM drive, determine whether the BIOS supports this feature or not before continuing. If it does, be sure that the boot order shown in the BIOS will cause the system to check the CD-ROM drive for a bootable image before checking the hard drive for a bootable image (e.g., CD-ROM drive, then floppy drive, then hard drive). In addition, only XA_WIN_2K_PRO_wSP4 supports reloading from a USB CD-ROM compatible drive, and if you do reload from a USB CDROM drive you must disable USB 2.0 support in the BIOS until 2K has loaded. Once the BIOS is set, follow the instructions under “How to reinstall Windows® 2000 with the bootable CD-ROM”.If your system does NOT have a bootable CD-ROM, or if you are not comfortable making modifications to your BIOS settings, you will use the XA_WIN_2K_PRO or XA_WIN_2K_PRO_wSP4 to make a set of backup boot floppy disks for starting the initial reinstalling process for Windows® 2000. Any desktop, laptop, or industrial PC with a floppy drive, and a CD-ROM drive can be used to create these backup diskettes. To create the set of backup boot floppy disks, follow the instructions on page 3 on “How to create a set of backup boot floppy disks”. Then follow the instructions on page 4 for “How to reinstall Windows® 2000 using the set of backup boot floppy disks and the Recovery CD” to complete the process.NOTEThis procedure will destroy data that may exist on the hard disk drive.NOTEIf you encounter problems setting up Windows® 2000, see the Setup.txt file that comes with Windows®. That file is on the Pro-face Recovery Media CD Disk. The path is <CD-ROM drive>:\Setuptxt\Pro1.txt and :\Setuptxt\Pro2.txt.NOTEWhen reinstalling your operating system, you will be prompted to install a Microsoft®Windows® 2000 CD or set of backup floppy disks and the CD. Install the Pro-face Recovery Media CD labeled XA_WIN_2K_PRO or XA_WIN_2K_PRO_wSP4 CD or the set of four backup floppy disks labeled Setup Disk 1, Setup Disk 2, Setup Disk 3, Setup Disk 4 and then the Recovery Media CD instead. The Microsoft® Licensing Agreement requires that the Microsoft® name shall not be used on the recovery media label or packaging artwork.You will need:• your Pro-face/Xycom unit with bootable CD-ROM drive, and• the XA_WIN_2K_PRO or XA_WIN_2K_PRO_wSP4 CD shipped with your unit• Microsoft® Windows® 2000 Product Identification number (PID) for your system. The PID for your system can be found on the Microsoft® sticker attached to the rear chassis ofyour Pro-face/Xycom Industrial Computer. You will see the PID number in thefollowing format: “XXXXX-XXXXX-XXXXX-XXXXX-XXXXX,” where X is analphanumeric character.1. Verify that your Pro-face/Xycom unit’s BIOS setup is configured to boot to the CD-ROMdrive. If your system’s BIOS does not support booting to the CD-ROM drive, follow the instructions in “How to create a set of backup boot floppy disks” and “How to reinstallWindows® 2000 using a set of backup boot floppy disks and the Recovery CD”.2. Insert the Microsoft® Windows® 2000installation CD-ROM, (XA_WIN_2K_PRO orXA_WIN_2K_PRO_wSP4), into the CD-ROM drive and cycle the power on the system.3. The Welcome to Setup screen will appear. Press Enter.4. When prompted, insert the CD labeled XA_WIN_2K_PRO or XA_WIN_2K_PRO_wSP4. PressEnter.5. Continue to follow the prompts to complete the installation process.6. You will now need to install your drivers. Go to the section “Device Driver Installation”.You will need:• a computer with a floppy drive and a CD-ROM drive (bootable drive optional),• the XA_WIN_2K_PRO CD, shipped with your unit,• 4 blank high-density diskettes labeled:“Setup Disk 1”, “Setup Disk 2”, “Setup Disk 3”, “Setup Disk 4”• Microsoft® Windows® 2000 Product Identification number (PID) for your system. The PID for your system can be found in the bag of media shipped with your Pro-face/XycomIndustrial Computer. You will see the PID number in the following format:“XXXXX-XXXXX-XXXXX-XXXXX-XXXXX,” where X is an alphanumericcharacter.1. Insert the XA_WIN_2K_PRO compact disk into a CD-ROM drive, and the first blank, formatteddisk (labeled Setup Disk 1) into the floppy drive.2. Click Start, and the click Run.3. At the prompt, type the following command, replacing “d” with the letter of your CD-ROMdrive, and “a” with the letter of your floppy disk drive.D:\bootdisk\Makeboot.exe a:4. Follow the instructions that appear.NOTEYou can use any computer to create the set of backup floppy boot disks, even yourPro-face/Xycom unit. You do not, however, have to be running Windows® 2000 to create the set of backup boot floppy disks. A directory called \Bootdisk resides in the root of the Windows®2000 Setup CD, which contains two utilities capable of generating the set of backup boot floppy disks. If you are booted into Windows® 9x, you will need to run the 32-bit version of this utility called makebt32.exe. If you are in DOS, or booted with a Windows® 98 Startup Floppy that has access to the CDROM, you can use the 16-bit version called makeboot.exe.1. Verify that your Pro-face/Xycom unit’s BIOS is configured to boot first to the floppy drive.This is almost always the case. If it is not, modify the configuration to support booting to the floppy drive.NoteIf you are not comfortable making modifications to the BIOS settings, it is safe to assume that the settings are correct. If you perform step 2 and the installation messages do not appear, call Pro-face Tech Support at 734.944.0482 for assistance.2. Insert the boot floppy, labeled Setup Disk 1, into the floppy drive and power-up thesystem.3. When prompted to insert disk #2, insert the Recovery Media Setup Floppy disk, labeledSetup Disk 2 into the floppy drive.4. Press Enter. Continue installation of disks as prompted.5. Following the installation of all disks you will see the Welcome to Setup screen. PressEnter.6. When prompted, insert the Windows 2000 CD insert the CD labeled XA_WIN_2K_PRO orXA_WIN_2K_PRO_wSP4. Press Enter.7. If the Doc. CD has an Install.txt or Readme.txt file associated with your unit model, thenrefer to it for additional details about reloading the recovery media. For example, youunit model may have a driver that needs to be loaded during the re-install process tosupport your hard drive8. During the installation process, when the “Press F6” prompt appears (to allow you toload additional drivers), you must press the F6 key if you have a unit with a hard driveinterface that requires third party driver installation. SCSI, SATA and RAID drives areexamples of drive types that may require this. There is no harm done if you press the F6 key, then decide that you don’t need to load any third party drivers. If you fail to load a the third party driver on systems that require one for the hard drive, then the hard drive will not be found by the OS when the hard drive partitioning and formatting phase of the install attempts to start and you will have to start the recovery process over again..9. Continue to follow the prompts to complete the installation process.10. You will now need to install your drivers. Go to the section “Device DriverInstallation” on page 5.1. Insert the Documentation and Support Library CD and navigate to the driver file foritems such as a mouse, touch screen, keypad, Ethernet, and/or CD-ROM. Double click that file and the driver will install automatically.NOTE: The correct device drivers are shipped with your Pro-face/Xycom computer on either floppy or CD-ROM disk. It can also be downloaded from Pro-face at.Your Pro-face Recovery Media CD, XA_WIN_2K_PRO or XA_WIN_2K_PRO_wSP4,for Microsoft®Windows® 2000 includes one service pack:- Service Pack 4 (in Service Pack 4 folder);If you require a service pack to be installed or re-installed, then perform the following steps to install the service pack of your choice.1. Start Windows Explorer.2. Double click on the CD-ROM drive to display the contents of the CD labeledXA_WIN_2K_PRO or XA_WIN_2K_PRO_wSP4. Note: XA_WIN_2K_PRO_wSP4 already has SP4 pre-installed as part of the recovery media installation process and typically doesn’t need to be re-installed.3. Copy the desired folder from the CD-ROM disk to the hard disk drive (e.g. C:\).4. Double click the new Service Pack 4 (or SP4) folder on the hard disk drive to display thecontents.5. The Service Pack 4 folder will include one executable file. That file is the compressed,self-extracting Microsoft Service Pack.6. To extract and install the Service Pack, simply double click on the executable file andfollow the instructions in the dialog boxes as they appear.Your Pro-face Recovery Media CD, XA_WIN_2K_PRO or XA_WIN_2K_PRO_wSP4,for Microsoft®Windows® 2000 includes an updated internet browser:- Internet Explorer 6.0 which includes SP1 (in IE60 folder);If you require IE 6.0 to be installed (e.g. If you are using IWS 6.0 with SP3), then perform the following steps to install this software.1. Start Windows Explorer.2. Double click on the CD-ROM drive to display the contents of the CD labeledXA_WIN_2K_PRO.3. Double click the new IE60 folder on the CD-ROM drive to display the contents.4. To install the browser, simply double click on the executable file and follow the instructionsin the dialog boxes as they appear.140639 (E)。
Pro face资料传输pro-face资料传输Pro face备份步骤和屏幕传输设置说明一、pro-face画面备份1.打开pro face编辑软件，选择接收传送，选择保存路径并填写保存文件名。
二、pro-face画面传输设定――画面传输前需做传输设定重试次数：默认为5次baudrate波特率：gp2000系列触摸屏传输速度最快可达到115.2kbpsethernet：本系统暂未使用网络连线模块3.发送信息uploadinformation：上传信息（程序的上载信息，如果没有选择此项，将无法将程序从gp上传到电脑。
）gpsystemscreen：gp系统画面filingdata（cfcard）：配方数据数据传输函数CsvData（CFcard）：数据传输函数CSV数据发送信息。
建议选择“全部”4、transfermethod传输方式Sendallscreens：发送所有图片（将项目文件中的所有图片数据传输到触摸屏。
）automaticallysendchangedscreen：自动发送更改后的图片（在当前项目文件中，仅传输更新后的图片。
如果选择此传输方式，则在GP软件中删除的图片在传输后不会在触摸屏上自动删除。
如果要完全更新图片，还应选择“发送所有图片”。
但是，对于CF卡上的数据，即使选择了“发送所有图片”，也不能删除。
）senduserselectedscreen：可根据需要，传输指定画面。
transfermethod建议选择自动发送已更改的画面5.传输模式preparationforatransgerandatransferaremade:传输准备和传输同时进行（传输检测与图片传输同时进行，速度更快。
）在准备转移后：在准备传输完成后再传输（检查传输系统没有错误时，传输开始。
）6、设置auutomaticsetup：自动设置（如有必要，根据GP的状态执行此设置操作。
通常，选择“自动设置”模式）forcesystemsetup：强制系统设置（不管gp的状态如何，每次数据画面传送时，都要执行一次系统设置。
