下载文档原格式
The Hawkeye 4 Lite (H4L) is the next generation of the widely-fielded L3Harris Hawkeye family, lighter in weight with enhanced modularity. The H4L VSAT features a carbon fiber 1.3 M segmented antenna supporting high-speed data and voice for Internet, VPN and video transmission. Theantenna is available with auto acquire or manual pointing capabilities and X, Ku and Ka bands, with standard and high-power options for each. This easily-transportable solution supports quick, in-field modem changes, and easy upgrades to new modem technologies, including anti-jam protection. The H4L features the industry-leading Viewsat-E GUI and GATEKEEPER™ interference excision technology.HAWKEYE 4 LITE1.3 Meter Flyaway VSATANTENNAAperture 1.3 M parabolic Optics Center fed Acquisition Manual Auto-Acquire Elevation 5° to +90°5° to +90°Azimuth±90°±120LEO/MEO CapableN/AYesPACKED SYSTEM WEIGHT (950MP W/AC ONLY SUPPLY)Weight Two cases, <84 lbs each DimensionsAll cases: <70 linear inRF PERFORMANCERF BAND X KuKa Transmit (GHz)7.90-8.4013.75-14.5029.0-31.0Receive (GHz)7.25-7.7510.95-12.75 Universal LNB 19.2-21.2 Universal LNB Polarization Circular Linear Circular G/T16.7 dB/K 20.5 dB/K 21.8 dB/K EIRP [Standard Power] 51.7 dBW 54.8 dBW 56.6 dBW EIRP [High Power]54.7 dBW58.2 dBW59.9 dBWMODEM INTEGRATIONSupported ModemsiDirect 950mp (Evolution and Velocity) ViaSat CBM-400 (Linkway and EBEM) L3Harris MPM-2500 (NCW) External ModemFuture ModemsiDirect 450 mp Comtech 5650CL3Harris Protected Anti-Jam Tactical Satcom (PATS)COMMON CONTROLLERInternal High Stability OCXO Included Beacon Receiver IncludedGatekeeper (optional)Gatekeeper w/ embedded Spectral Display capability (via ViewSAT-e)WiFi® (optional)802.11a/b/g/n (20 Mbps device to modem throughput)Common Controller and Modem Module™Non-Export Controlled InformationL3Harris Technologies is an agile global aerospace and defense technology innovator, delivering end-to-end solutions that meet customers’ mission-critical needs. The company provides advanced defense and commercial technologies across air, land, sea, space and cyber domains.HAWKEYE™ 4 Lite 1.3 M Flyaway VSAT© 2021 L3Harris Technologies, Inc. | 04/2021 GCS SP183AINTERFACELAN Ports 3x Gigabit RJ-45GPS(Internal) GPS Receiver/Antenna(Optional external) NMEA 0183, NMEA 2000Receive Monitor L-band receive monitor port External Modem L-band interfacesUser InterfaceRemote ViewSAT-e GUI and local color LCD and keypadPOWERAC SupplyEnhanced Feature AC Input 90-264 VAC, 47 ~ 63 Hz (auto-ranging)90-264 VAC, 47 ~ 63 Hz (auto-ranging)DC InputN/A18-36 VDCBattery Operation N/AStandard Power RF band kits: 1, 2, or 3 BB-2590 high capacity (288 WH) batteries High Power RF band kits:Requires 3x BB-2590 high capacity (288 WH) batteriesNote: AC or DC input required during auto acquisition process. Battery operation not supported.Battery Run Time (minimum)N/A1 hour run time on single BB-2590 high capacity (288 WH) battery with Standard Power RF band kits and manual point.15-minute run time on 3x high capacity (288 WH) BB-2590 batteries with High Power RF band kitsBattery Charging N/ACapable of slow charging up to 3 BB-2590 batteries when AC or DC input is present UPS N/AUninterpretable power fail-over to connected battery input when AC and DC input power fails* Power requirements can vary depending on specific configurationENVIRONMENTALVibrationMIL-STD-810H, Method 514.8, Categories 5, and 7 through 11(packed for transit configuration) Cat 5 is Procedure II Truck/trailer/tracked environment. Cat 7, 8, 9 and 11 use Procedure I. Cat 10 use Procedure II HumidityMIL-STD-810H, Method 507.6 Procedure II 10 day Aggravated. (packed for transit and operating configurations)ENVIRONMENTALSalt/FogMIL-STD-810H, Method 509.7 (packed for transit and deployed configurations)Sand and DustMIL-STD-810H, Method 510.7Procedures I and II (packed for transit and operating configurations) Two runs – both ambient and High Temp ShockMIL-STD-810H, Method 516.8 procedures II and IV (packed for transit)RainMIL-STD-810H, Method 506.6,Procedure 1 (packed for transit and operating configuration)High TemperatureMIL-STD-810H, Method 501.7,Procedure I (packed for transit) and Procedure II (operating configuration) [55°C operational/71°C storage]Low TemperatureMIL-STD-810H, Method 502.7Procedure I (packed for transit) and Procedure II (operating configuration) [-32°C operational/-46°C storage]Wind25 MPH without anchors30 MPH, gusting to 45 MPH with anchorsSolar RadiationMIL-STD-810H, Method 505.7,Procedure I (operating configuration) [50°C operational]Low Pressure (Altitude)MIL-STD-810H, Method 500.6, Procedure I (packed for transit),Procedure II (operating configuration) 15,000 ft.Notes: (1) High temperature is defined without a solar load. Operational temperature is de-rated for solar radiation. (2) Product low temperature range to be de-rated to comply with modem manufactures low operating temperature specifications, where applicable.CERTIFICATIONS (PLANNED)ARSTRATX-Band (Standard and High Power) Ka-Band (Standard and High Power)Inmarsat Global Xpress Ka-Band (High Power) Category 1 and Category 4Intelsat Flex Ku-Band (High Power)ViaSatCBM-400 embedment certification CEEN60950, EN301428, EN301489, and RoHS1025 W. NASA Boulevard Melbourne, FL 32919。
Page 1 of 2APPLICATIONThe ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack supports 10GBASE-T networks. The jack is part of a complete ATLAS-X1 Cat 6A UTP system, ideal for the most demanding mission-critical network applications. The connector supports emerging technologies and will easily adapt to network trends.SPECIFICATIONThe jack shall meet or exceed the requirements for channel and component-level electrical transmission performance as described in ANSI/TIA-568.2-D (Cat 6A), ISO/IEC11801-1 (Class E A ), and EN 50173-1 (Class E A ). The jack shall be compliant with ANSI/TIA-1096-A, c(UL)us Listed, and be independently verified for electrical transmission performance and power delivery. The jack body shall be made of die-cast zinc and all plastic components shall be made of high-impact, fire-retardant plastic rated UL 94V-0. The jack shall support tool-free termination and re-termination and shall not require a specialized termination tool. The jack wiring shall be universal to accommodate T568A and T568B wiring schemes. The jack shall be available in 13 colors; more than established by the ANSI/TIA-606-C standard. The jack shall be offered in standard and shuttered styles and select jacks shall be supplied with interchangeable icons. The jack shall be compliant with IEEE 802.3 PoE Type 1, 2, 3, 4 (100 watts max).DESIGN CONSIDERATIONS• Use in any QUICKPORT™ housing to support Cat 6A UTP connectivity in surface-mount, flush-mount, or modular furniture outlets and field-configurable panels• Can be used in conjunction with other QUICKPORT snap-in modules for voice/data/video applications over UTP , coax, and fiber• To identify ports, use different colored modules andicons for each application (full selection of ANSI/TIA-606 compatible colors, 13 available)• Robust housing and shutter protects the jack in harsh environmentsATLAS-X1™ Cat 6A Component-Rated UTP QUICKPORT™ Jack6AUJK-xx6, ICONS-ICxFEATURES• Independently tested and guaranteed to exceed all component, permanent link, and channel margins• Patented Retention Force Technology™ (RFT) protects against tine damage and increases system longevity • For Power over Ethernet, RFT maintains contact force between plug and jack, preventing arcing from intermittent disconnects• Unique design supports tool-free termination andre-termination and requires no specialized termination tool • Short jack design supports a wider range of applications (e.g. shallow boxes, enclosures, bend radius, etc.)• Terminates from 26 to 22 AWG solid or stranded conductors for use on various cable types• Robust IDCs can withstand 20 re-termination cycles and jack contacts are tested for 750 plug-mating cycles to ensure system longevity• Available in 13 ANSI/TIA-606-C compatible colors • Tested and approved for use in air-handling spaces (plenum rating) in accordance with UL Standard 2043• Select jacks available with interchangeable icons (voice, data, A/V, blank) for easy ID• Jack with internal shutter protects against dust and debris • Solid metal body dissipates 53% more heat than plastic, minimizing damage from excess heat in PoE applications • Tine geometry prevents arcing damage where plug and jack make contactSTANDARDS & REGULATIONS• ANSI/TIA-568.2-D (Cat 6A)• ISO/IEC 11801-1 (Cat 6A)• EN 50173-1 (Cat 6A)• ANSI/TIA-1096-A (formerly FCC Part 68)• IEC 60603-7 (includes IEC 60512-5-2)• IEC 60512-99-002• IEEE 802.3 PoE Type 1, 2, 3, 4 (100 watts max)• Cisco UPOE, UPOE+ (90 watts max)• Power over HDBaseT™ PoH (95 watts max)• c(UL)us Listed (UL 1863)• UL 2043 Plenum Certified • RoHS 3• ETL verified to meet the IEC 60512-99-002 standard for support of IEEE 802.3 Type 4 PoE (100 watt) applicationsCOUNTRY OF ORIGINUSA and Mexico (Contact Customer Service for details)6AUJK-xx6, ICONS-ICxUSANetwork Solutions Headquarters +1 (800) 722 2082 *******************Leviton Berk-Tek Cable : +1 (800) 237 5835 ************************Asia Pacific+852 3620 2602********************Canada+1 (800) 461 2002**********************Europe+44 (0) 1592 772124 **********************Latin AmericaMX: +52 (55) 2128 6286 LATAM: +52 (55) 2333 5963 *********************Middle East & Africa +971 (4) 247 9800 *******************NETWORK SOLUTIONS PRODUCTS ARE AVAILABLE WORLDWIDE IN OVER 100 COUNTRIES. VISIT US ONLINE AT /NS TO LEARN MORE.Page 2 of 2For further support information, visit /ns/support6AUJK-xx6, ICONS-ICx6AUJK-xx6, ICONS-ICxMECHANICAL SPECIFICATIONSDimensions:See belowMaterials: Jack Body: Die-cast zincSpring-Wire Contacts: High quality, copper-based alloy, plated with 50 microinches of gold for lowest contact resistance andmaximum life Temp. (Storage):Temp. (Installation): Temp. (Operating):Humidity (Max.):WARRANTY INFORMATIONFor Leviton product warranties, go to /ns/warrantyPART NUMBERDescriptionStandard Jack Jack with Shutter GREENPACK™12-Pack Standard Jack ATLAS-X1™ Cat 6A Component-Rated UTP QUICKPORT™ Jack, white 6AUJK-RW66AUJK-SW66AUJK-CW6ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, light almond 6AUJK-RT66AUJK-ST6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, ivory 6AUJK-RI66AUJK-SI6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, yellow 6AUJK-RY66AUJK-SY6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, orange 6AUJK-RO66AUJK-SO6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, crimson 6AUJK-RC66AUJK-SC6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, dark red 6AUJK-RR66AUJK-SR6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, purple 6AUJK-RP66AUJK-SP6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, blue 6AUJK-RL66AUJK-SL66AUJK-CL6ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, green 6AUJK-RV66AUJK-SV6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, gray 6AUJK-RG66AUJK-SG6—ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, black6AUJK-RE66AUJK-SE66AUJK-CE6ATLAS-X1 Cat 6A Component-Rated UTP QUICKPORT Jack, brown6AUJK-RB66AUJK-SB6—Green (V)Blue (L)Purple (P)Crimson (C)Dark Red (R)Orange (O)Yellow (Y)Black (E)Gray (G)Ivory (I)Light Almond (T)Brown (B)Color-matched icons (ICONS-ICx) can be ordered separately in 72-quantity packs.x = icon color。
无线通信模块AW-MNT-01高山系列产品说明书v1.0一、产品介绍高山系列是北极风科技有限公司研发的一款基于Sub-GHz频段的LoRa无线技术通信模块，可以以较低功耗进行远距离通信，使用电池供电或者其他能量收集的方式供电。
自身较低的数据速率可以延长电池寿命和增加网络容量。
海洋系列通信模块适合于低成本大规模的物联网部署。
采用LoRaTM模式最高可以实现-148dbm的高灵敏度，并加上集成的+20dbm 的功率输出，可以实现小功率下超远距离传输，该模块适用于任何环境复杂的无线数据传输应用，如：无线抄表，智能家居控制，汽车电子，安防报警，工业监控与控制系统，远距离农业灌溉控制系统等应用。
该模组可以方便嵌入到客户现有产品或系统的设计当中，标准的SPI接口，使通信容易、简洁。
客户只需在原有的微控制器件编译简单的通讯协议，即可实现双向通信实现数据传输。
高山系列模块主要特点：●半双工通信●超强抗干扰性（信道抑制比：56db）●高接收灵敏度-139dbm.（32M无源10ppm晶体)●ISM多波段,不需要申请频率免费使用.●多频率可选，多种传输速率.可在FDMA及调频技术中应用.●智能复位、低电压监测，定时唤醒、低功耗模式、休眠模式●低功耗接受电流：10-12mA●256位FIFO TX/RX●RSSI信道侦测功能●传输模式：FIFO/直接模式（推荐FIFO包模式）●配置：AFC/空中唤醒功能/低功耗/载波侦听/FEC纠错/AEC加密●超远距离传输空旷最远可达5KM。
●模块尺寸：22.8*22.7*4.2mm高山系列模块主要应用：●无线抄表（水表、电表、气表）●无线点菜机、油田、矿区、工地、工厂等原有485/232接口系统●工业数据采集、传输、智能控制系统●无线报警系统●智能家具系统●婴儿监控系统/医院寻呼系统●无线小数据传输系统二、产品外观与尺寸正视图1三、模块引脚定义次序定义描述备注1GND信号地/2DIO1数字I/O，可自定义/3DIO2数字I/O，可自定义/4DIO3数字I/O，可自定义/5VCC电源 3.3V(1.8～3.6V)6MISO SPI数据输出/7MOSI SPI数据输出/四、基本参数：五、非承担责任1.由于违反本说明书，或由非指定人员提供维修、维护服务，造成不能正常使用、错误安装等情况，本公司不承担任何责任。
AeroWave ™ 100 Wi-Fi RouterIn-Flight InternetAeroWave 100 now has two Wireless Router options for easy passenger and crew access to in-flight internet:Data-only: Provides simple access to in-flight internetVoice & Data: In-flight internet plus ability to connect up to three wireless or wired phones for high quality voice phone calls** Requires supplemental Inmarsat Voice PlanAeroWave 100 Wi-Fi Data-only and Data/Voicerouter features• Designed to be compatible with the AeroWave 100 system using standard wired networking protocols through a 100Base-T,Wide Area Network (WAN) Interface using Point-to-Point Protocol over Ethernet (PPPoE)• Provides the ability to connect devices through a wired connection using a 100Base-T, Local Area Network (LAN) interface• Connect up to 12 wireless devices through the Wi-Fi Local Area Network (LAN) IEEE802.11 b/g/n Access Point• Discrete inputs are available to optionallydisable Wi-Fi and/or the Router• Powered by standard 28VDC Aircraft Power• Web Based Configuration GUI available to anyDevice Connected to the LAN• Includes 5.5 inch Hinged TNC-RP AntennaAeroWave 100 Wi-Fi Data/Voice router added features• Designed to connect to the AeroWave 100 high quality SBB voice channel using the Integrated Services for Digital Network (ISDN) Interface• A Discrete output is available to alert users via an external light or alarm• P BX (Private Branch Exchange) features include:– Outgoing and incoming calls utilizing the single AeroWave AMBEvoice channel– Extension calling for convent in-aircraft use–S upports up to 3 handsets including any combination of the following: • Generic SIP handsets including iPhone®, iPad® and Android™ appssuch as Linphone®• TrueNorth Handsets: TN1003, TN2003, TN2010, The MyStylus app • Power-Over-Ethernet (PoE) provided on the LAN Ethernet Portavailable to power handset Find Out MoreTo learn more, call 1.855.250.7027, contact your local BendixKing dealer or visit A60-1517-000-000 | 2/17© 2017 BendixKingLinphone SIP Application runson iPhone and Android allowinguse of existing contacts forconvenient calling.iPhone® and iPad® are registered trademarks of Apple Inc. Linphone® is a registered trademark of Belledonne CommunicationsAndroid™ is a trademark of Google。
The new SkyView SE offers a streamlined and simplified experience for pilots of simple VFR aircraft. SkyView SE systems are the most affordable SkyView systems ever, with the SV-D600 7” and SV-D900 10” displays priced hundreds of dollars lower than existing displays.SkyView SE displays are made specifically for VFR aircraft and pilots who want the most intuitive flight and engine instruments on the market. They feature simple and clear displays, with almost no menus to navigate in flight. At the same time, SkyView SE retains modern, innovative Dynon EFIS capabilities like SkyView’srevolutionary COM radio interface and 2-axis autopilot with single-touch controls. Without mapping capabilities, even the 7” SkyView SE display has a large, easy-to-read Primary Flight Display, including pilot-selectable six-pack “steam gauges”. With its simplified feature set and installation, SkyView SE is the successor to Dynon’s legacy D100 series products (which remain available). SkyView SE systems configured like their D100 series counterparts are similarin price. SkyView SE displays have the same dimensions and mounting requirements as existing SkyView 7” and 10” displays.SkyView SE is ideal for ultralight and simple light sport aircraft, where its low weight and low cost help make factory-built aircraft affordable. For aircraft in the US market, SkyView SE systems equipped with Dynon’s Mode-S transponder and SV-GPS-2020 offer the lowest cost integrated glass panel system meeting FAA 2020 ADS-B Out requirements.The 7” SV-D600 and 10” SV-D900 displays are priced at $1760 and $3010, respectively. A complete 7” SkyViewSE system with primary flight instruments - the equivalentof an EFIS-D100 - starts at $2960. A FlightDEK-D180 EFIS+EMS starts at only $3560. For only $2790 more, SkyView SE customers can add the SV-XPN DR-261 Mode-S Transponder (with ADS-B Out) and SV-GPS-2020 GPS Receiver/Antenna. Aircraft so equipped will be 100% compliant with the FAA’s upcoming ADS-B Out mandate.7” SkyView SE (SV-D600) – $176010” SkyView SE (SV-D900) – $3010S IMPLIFIED E XPERIENCE | S PORT E FIS | S TREAMLINED E DITIONNo matter what you call it, SE is Dynon’s most affordable and intuitive SkyView experience ever.THE NEWDynon Avionics, Inc. Voice: (425) 402-0433 Fax: (425) 984-1751Dynon Avionics 19825 141st PL. NE, Woodinville, WA 98072Note: Features and capabilities depend on system configuration and purchase options.Primary Features SkyView SE SkyViewPrimary Flight Instruments Engine MonitoringMapping and Navigation Synthetic Vision Angle-of-Attack“Six-Pack” Flight Instruments G-Meter AutopilotMode S Transponder2020-Compliant ADS-B Out Dynon COM RadioCompatible products SkyView SE SkyViewBackup Battery SV-KNOB-PANEL SV-INTERCOM-2SSV-MAG-236 Remote Magnetometer SV-AP-PANEL / Trim ControlSV-ADSB-470 (ADS-B In Traffic / Weather)SV-ARINC-429 (for connection to IFR navigators)Wi-Fi Adapter Video InputExternal IFR Navigators VP-Xother capabilities SkyView SESkyViewRotax 912 iS Screen Dimming AP Level Mode HSIExpert Autopilot mode AP 180° turn mode SkyView Touch ChecklistsEngine Lean Assist Mode 3rd Party Traffic Devices Dual Engine SupportStopwatch & Countdown /Trip Timers IFR HSI Features Bearing Pointers NAV Radio DisplayNon-English Language Packs1Simplified Mode Only, 2 No AP Controls: Trim Control & Autopilot Autotrim Only, 3 Auto or Ext Knob Only, 4 Via Ext Button, 5 One External NMEA Source13452********************** (425) 402-0433 (425) 984-1751Who should buy SkyView SE?SkyView SE is great for pilots that love the simplicity of Dynon’s legacy D100 series products but are looking ahead to 2020 and the ADS-B Out equipment mandates. If you fly an aircraft or mission that does not require complex mapping or navigation features,SkyView SE is ideal. SkyView SE is the lowest-cost way to equip with Dynon’s SkyView system, and it’s upgradeable to the full SkyView functionality in the future.Wha t are the differences between SkyView SE and buying a SkyView system without the MAP license and Synthetic Vision turned off?In addition the removal of the mapping capability, SkyView SE has a simplified set of features and capabilities to enable the most intuitive avionics flight experience ever for VFR pilots. Because of this streamlining of features, SkyView SE features almost no sub-menus. See the full list of product features for details.Can I buy a SkyView SE to add to my existing SkyView system?No. Because of the differences in features, SkyView and SkyView SE displays can not be connected together in the same aircraft.I have an EFIS-D100 / EMS-D120 / FlightDEK-D180 in my aircraft now. How easy is it to convert to SkyView SE?The SV-D600 (7”) display is slightly larger than the panel cutout for an D100 series product, so you will need to modify your panel. The engine monitoring connectors are largely the same and are virtually “plug and play”, but other harnesses and connectors are unique to SkyView. We have a manual available that discusses converting to a SkyView system. SkyView SE displays are exactly the same size and have the same mounting requirements as existing SkyView displays.Wha t Autopilot capabilities does SkyView SE have?When equipped with servos, SkyView SE features a full-featured two axis autopilot with Dynon’s groundbreaking simplified controls. The autopilot can hold and change altitude, hold and change direction, and follow an external GPS source. It does not have IFR features like VNAV , IAS mode, or a flight director. T o reduce menu complexity, there is no on-screen LEVEL button, but an external one can be connected (Dynon makes one especially for this purpose). The optional SV-AP-PANEL’s autopilot control buttons are unsupported by SkyView SE, although an SV-AP-PANEL can be installed behind the panel to provide Trim Controller and Autopilot Auto-Trim capabilities.Is SkyView SE 2020 compliant?Yes, with the installation of the SV-GPS-2020 and SV-XPNDR-261.I’ve already bought parts of my SkyView system (servos, ADAHRS, etc.). Will those work with SkyView SE?Yes, with the exception of products that are not supported by SkyView SE, such as SV-ARINC-429, SV-ADSB-470, Wi-Fi Adapter, Video Input, External IFR Navigators, etc. See the complete feature and product list for details.I just bought my SkyView displa ys? Can I exchange them for SkyView SE displa ys (with the price difference as a refund)?We do not currently offer downgrades or trade-ins to SkyView SE. If you have a special situation, please contact us directly at 425-402-0433.Do you have any trade-in program from the D100 series of avionics?We do not currently have a trade-in program for the D100 series.Is Skyview SE av ailable with Touch?No. SkyView SE has almost no sub-menus, so most features, including autopilot, are available with a single button press.Wha t about seeing traffic in SkyView SE?There are no mapping or synthetic vision capabilities in SkyView SE. Therefore, display of traffic is not supported.I already have a Garmin 430, but I like the fea ture set of SkyView SE. Is there any wa y to use the 430 with SkyView SE?No. SkyView SE does not support connection to the SV-ARINC-429 module, and therefore does not support IFR navigators. You can, however, display guidance from one NMEA-based GPS navigator (such as the x96 portable series) on the HSI. The Autopilot can also follow this guidance.19825 141st PL. NE, Woodinville, WA 98072。
海运费用BAF ; Bunker Adjustment Factor 加油调节因素FAF ; fuel adjustment factor 燃油价格调整附加费YAS ; Yen ascend surcharge日元升值附加费CAF ; currency adjustment factor货币贬值附加费GRI ; general rate increase 综合费率上涨附加费一般是南美航线、美国航线使用DDC ; destination delivery charge目的港卸货附加费目的港卸货附加费，常用于美加航线IFA ; interim fuel additional 临时燃油附加费某些航线临时使用PTF; 巴拿马运河附加费美国航线、中南美航线使用ORC; original receiving charge 原产地接货费这是最早并专在广东地区征收的附加费用，与目前中国各港口所收的THC内容一样EBS ; EMERGENCY BUNKER SURCHARGE 紧急燃油附加费一般是澳洲航线使用PCS ; Panama Canal Surcharge巴拿马运河附加费美国航线,中南美航线使用，过巴拿马运河时的费用PSS ; peak season surcharge旺季附加费这是在每年运输旺季时，船公司根据运输供求关系状况而加收的附加费，也称高峰附加费。
这是目前在集装箱班轮运输中出现得较多的附加费用。
THC ; terminal handling charge码头操作费这是国际班轮公会和航线组织联合从2002年1月起向中国货主征收的附加费用。
对此费用，货主与船公司之间存在较大的争议。
货主认为按班轮条款，码头操作费应该已包含在运费里了，因此加收THC属于不合理收费，但船公司却称收取此项费用是降低成本的机制，用作抵消向码头经营商支付的装卸作业费用。
这一争议至今未见解决，因而费用仍在照常收取。
EPS; Equipment Position Surcharges设备位置附加费DDC ; destination delivery charge目的港卸货附加费DOC; Document of Compliance？DOcument charges 文件费IFC ; Inland Fuel Charge 内陆燃油附加费ISPS; International Ship and Port Facility Security Code 《国际船舶和港口设施保安规则》的缩写也称港口安全费货运费用术语海运费ocean freight集卡运费、短驳费Drayage操作劳务费labour fee or handling charge商检换单费exchange fee for CIP换单费D/O fee拆箱费De-vanning charge港杂费port sur-charge电放费B/L surrender fee冲关费emergent declearation change海关查验费customs inspection fee待时费waiting charge仓储费storage fee改单费amendment charge拼箱服务费LCL service charge动、植检疫费animal & plant quarantine fee 移动式起重机费mobile crane charge进出库费warehouse in/out charge提箱费container stuffing charge滞期费demurrage charge滞箱费container detention charge卡车运费cartage fee商检费commodity inspection fee转运费transportation charge污箱费container dirtyness change坏箱费用container damage charge清洁箱费container clearance charge电汇手续费T/T fee转境费/过境费I/E bonded charge空运方面的专用术语空运费air freight机场费air terminal charge空运提单费airway bill feeFSC (燃油附加费) fuel surchargeSCC（安全附加费）security sur-charge抽单费D/O fee上海港常用术语内装箱费container loading charge(including inland drayage)疏港费port congestion charge他港常用术语场站费CFS charge文件费document chargeAMS Automated Manifest System 自运舱单系统ACS/ACC ALAMEDA CORRIDOR SURCHARGE 火车通道费（自洛杉矶转运）BAF BUNKER AJUSTMENT FACTOR 燃油附加费系数BAF 燃油附加费，大多数航线都有，但标准不一。
P/N: 1802000013014 *1802000013014*MiiNePort W1 Series Quick Installation GuideEdition 6.0, November 2017Technical Support Contact Information/supportMoxa Americas:Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778 Moxa China (Shanghai office): Toll-free: 800-820-5036 Tel: +86-21-5258-9955 Fax: +86-21-5258-5505 Moxa Europe:Tel: +49-89-3 70 03 99-0 Fax: +49-89-3 70 03 99-99 Moxa Asia-Pacific:Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 Moxa India:Tel: +91-80-4172-9088 Fax: +91-80-4132-10452017 Moxa Inc. All rights reserved.OverviewThe Moxa MiiNePort W1 series is an embedded serial-to-WLAN module that allows you to connect serial devices to the wireless Ethernet without dealing with the complexities of RF.The MiiNePort W1 series supports and is compliant with the 802.11b/g radio specification.Package ChecklistThe MiiNePort W1 series Starter Kit contains the following items:• 1 MiiNePort W1 series wireless module•MiiNePort W1 evaluation board•Antenna - ANT-WDB-ARM-02•Antenna - CRF-MHF/SMA(M)-14.2• 1 cross-over Ethernet cable• 1 null modem serial cable•Universal power adaptor•Documentation and software CD•Quick installation guide (printed)•Warranty cardHardware InstallationFollow these steps to prepare the module and evaluation board for testing and application development.STEP 1: Plug the module into its socket on the evaluation board. For detailed information about the pin assignments, wiring, LEDindicators, and board layouts, refer to the MiiNePort W1 seriesUser’s Manual.STEP 2: Connect the evaluation board to the Ethernet network using an RJ45 Ethernet cable.STEP 3: Plug the 12 VDC power line into the evaluation board’s power jack.STEP 4: Connect a serial device to the evaluation board using a serial data cable.Software InstallationSTEP 1: Open NPort Search Utility to begin installation. A Welcome window will appear. Click Next to proceed.STEP 2: Click Install to install the program files in the defaultdirectory.STEP 3: The installation wizard will show the progress of theinstallation as the files are installed.STEP 4: After the files have been installed, click Finish to complete the installation.Module ConfigurationSTEP 1: Run NPort Search Utility.STEP 2: Press Search to search for MiiNePort W1/MiiNePort W1-T modules on the LAN.STEP 3: When the search is complete, all modules that were found will be listed. If more than one module has been found, you canidentify your module by referring to its MAC address.STEP 4: Please refer to the MiiNePort W1 series User’s Manual for additional configuration instructions.Reference MaterialDetailed user’s guides can be found on the Documentation and Software CD that is shipped with your MiiNePort W1 series.。
Folleto de productosVIAVIAVX-10KEquipo de pruebas de línea de vueloPruebas de verificación de rendimiento de sistemas críticos de vuelo desde un solo dispositivo.Característicasy Funciones de pruebas configurables y Interfaz de usuario intuitiva y Aplicaciones definidas por software y Funcionamiento remoto y Compatible con Android™ e iOS® y Pruebas guiadasy Receptor de GPS integradoy Configuraciones de pruebas internacionalesVentajasy Puede adquirir solo las opciones de pruebas que necesite. y Su funcionamiento sencillo ahorra tiempo.y Se actualiza fácilmente con las futuras aplicaciones. y Realice las pruebas cómodamente dentro y alrededor de la aeronave desde su dispositivo móvil. y Recupere las secuencias guardadas de las pruebas para utilizarlas en el futuro. y Proporciona datos de posición precisos para pruebas de ADS-B. y Es compatible con los requisitos normativos globales.Aplicacionesy ATCRBS y transpondedores de modo S y UAT y GICB de E/S de 978/1090 MHz y Tráfico ADS-B de 978/1090 MHz y ACAS/TCAS I/II y TAS y ILS: LOC, GS y MB y DME/VORy Comunicaciones AM/FM, SSB y SELCAL ampliado y EPIRB, PLB y EL T de 121/243/406 Mhz y VSWR y distancia a falloEl sistema AVX-10K es una solución completa de pruebas de línea de vuelo que ofrece a los técnicos de aviónica de hoy en día un instrumento fácil de usar para realizar pruebas en transpondedores, ADS-B, TCAS, Comunicaciones, ILS, VOR, DME, UAT, EL T y más. Desde una rápida prueba automática del sistema de vuelo hasta un procedimiento de solución de problemas exhaustivo, las pruebas se pueden realizar cómodamente alrededor de la aeronave o dentro de lacabina de vuelo desde la pantalla táctil o con su dispositivo móvil. Su configuración es sencilla, las pruebas se realizan rápidamente y los informes se pueden transferir a través de USB, Ethernet y de forma inalámbrica, todo ello desde una interfaz de usuario moderna o la aplicación Mobile T ech de VIAVI Solutions.© 2023 VIAVI Solutions Inc.Las especificaciones y descripciones del producto descritas en este documento están sujetas a cambio, sin previo aviso.AVX10KFlightLineTestSet-br-avi-nse-es 30193174 911 0323Contáctenos+34 91 383 9801 +1 954 688 5660Para localizar la oficina VIAVI más cercana,por favor visítenos en viavisolutions.es/contactenosviavisolutions.es.mx。
