下载文档原格式
CTI 华测检测机构总部：深圳市宝安区70区鸿威工业园C 栋Centre Testing International (Shenzhen) Company LimitedRoHS指令豁免项目Exempted Items of RoHS Directive欧盟委员会针对豁免材料陆续发布了10次决议，分别是：2002/95/EC、2005/717/EC、2005/747/EC、2006/310/EC、2006/690/EC、2006/691/EC、2006/692/EC、2008/385/EC、2009/428/EC 和2009/443/EC，这些决议中的豁免共计38项：1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp.1. 小型荧光灯中的汞，汞含量不超过5mg/灯。
2 .Mercury in straight fluorescent lamps for general purposes not exceeding:2. 普通用途直荧光灯中的汞，汞含量不超过：· Halophosphate 10 mg;盐磷酸盐 10mg.· Triphosphate with normal lifetime 5 mg;普通寿命的三磷酸盐5mg· Triphosphate with long lifetime 8 mg.长寿命的三磷酸盐8mg3. Mercury in straight fluorescent lamps for special purposes. 3. 特殊用途直荧光灯中的汞 4 Mercury in other lamps not specifically mentioned in this Annex.4. 本附录未明确提出的其他灯具中的汞5 Lead in glass of cathode ray tubes, electronic components and fluorescent tubes.5. 阴极射线管，电子元件以及荧光管的玻璃中的铅6 Lead as an alloying element in:6. 铅作为合金元素在：· Steel containing up to 0.35 % lead by weight;钢里，铅的重量含量不超过0.35 %· Aluminium containing up to 0.4 % lead by weight;铝里，铅的重量含量不超过0.4%· Copper alloy containing up to 4 % lead by weight.铜合金里，铅的重量含量不超过4%C T I 华测检测机构CTI 华测检测机构总部：深圳市宝安区70区鸿威工业园C 栋Centre Testing International (Shenzhen) Company Limited7 · Lead in high melting temperature type solders (i.e. lead-based alloys containing 85 % by weight or more lead).7. 用于高温融化焊料中的铅（即：锡铅焊料合金中铅含量超过85%）· Lead in solders for servers, storage and storage array systems, network infrastructure equipment for switching, signalling, transmission as well as network management for telecommunication.用于服务器，存储器和存储系统中的铅，用于交换，信号和传输，以及电信网络管理的网络基础设施设备中焊料中的铅。
JDF-2S/N 0005473 & UPILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice.BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227SPRINGFIELD, ILLINOIS 62708-3227PHONE: (217) 529-6601 FAX: (217) 529-664438311.0000E 03/08 ©2005 Bunn-O-Matic Corporation DISCONTINUED VERSION Parts listed in this catalog may no longer be available.BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTYBunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:1) All equipment other than as specified below: 2 years parts and 1 year labor.2) Electronic circuit and/or control boards: parts and labor for 3 years.3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.BrewWISE, BUNN Gourmet Ice, BUNN Pour-O-Matic, BUNN, Bunn-OMatic, Bunn-O-Matic, BUNNlink, BUNNserve, BUNN Espress, DBC, Dr. Brew, Dual, EasyClear, EasyGard, Easy Pour, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, IMIX, Infusion Series, Legendary for Quality, The Mark of Quality in Beverage Equipment Worldwide, My Café, Power-Logic, Safety-Fresh, Scale-Pro, Single, Smart Funnel, Smart Hopper, Soft Heat, SplashGard, System III, ThermoFresh, 392, AXIOM, Beverage Profit Calculator, Beverage Bar Creator, BrewLOGIC, BrewMETER, BrewWIZARD, BUNNSERVE, BUNNsource, Coffee At Its Best, Cool Froth, Digital Brewer Control, Intellisteam, Nothing Brews Like a BUNN, Pouring Profits, Pulse Wave, Quality Beverage Equipment Worldwide, Signature Series, Silver Series, Smart Heat, SmartWAVE, Tea At Its Best, The Horizontal Red Line, Titan, Ultra, are either trademarks or registered trademarks of Bunn-O-Matic Corporation.238311 020608TABLE OF CONTENTSMain Frame & Covers (4)Upper Cabinet & Panels (6)Refrigeration Components (8)Compressor Components (10)Fan Assembly (12)Water Tank Assy (14)Circulation Pump & Lines (18)Product Coil & Lines (20)Dispense Platform Assy (22)Dispense Valve Assy (24)Plain Water Manifold (Early Models) (26)Plain Water Manifold (Late Models) (28)Rinse Water Manifold & Solenoid (Early Models) (30)Rinse Water Manifold & Solenoid (Late Models) (34)Pump Assy (38)Bottle Adapter Assy (40)Door Assy (42)Electrical Components (46)Refillable Container Assy (50)Numerical Index (52)338311 111706438311 050807ITEM PART NO. QTY. DESCRIPTION5* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.MAIN FRAME & COVERS1 34409.0000 1 Base Frame Assy2 26528.0000 4 Leg 03996.0000 4 Pad, Non-skid3 34410.0000 1 Frame, Refridgeration - - - - - - - -4 Screw #10-32 x4 39428.0000* 2Bracket, Rear support (Late models with Water Inlet Valve)34797.0000* 2 Bracket, Rear support (Early models prior to Water Inlet Valve) 02332.0001 8 Screw, Crimptite #6 x .25"5 38469.0001* 1 Bracket, Upper Frame6 36192.1000 1 Panel w/Decals, Right (Includes item 11) 02332.0001 3 Screw, Crimptite #6 x .25"7 34786.1000 1 Panel w/Decals, Top (Includes item 8) 02332.0001 4 Screw, Crimptite #6 x .25"8 33458.0000 1 Decal, Refridgeration ON - OFF9 36191.1000 1 Panel w/Decals, Left (Includes items 10, 11, 12 & 24) 02332.0001 3 Screw, Crimptite #6 x .25"10 33461.0001 1 Decal, Refridgerant Charge11 27442.0000 2 Decal, Warning - Moving Parts12 00986.0002 1 Decal, Warning - Electrical13 39561.0001 1 Panel, Rear 02332.0001 4 Screw, Crimptite #6 x .25"14 33645.0000 1 Decal, Main Water Connection15 33646.0000 1 Decal, Rinse Water Connection (Early Models)16 00656.0000 1 Decal, Comply To Plumbing Code17 27354.0000 4 Bushing18 00668.0000 3 Plug19 35998.0001 1 Panel, Splash 01317.0003 2 Screw, Truss Head, Locking #8-32 x .38"20 21436.0000 2 Catch, Magnetic21 33538.0000*1 Bracket, Right33539.0000* 1 Bracket, Left 01311.0001 4 Screw, Truss Head, Locking #8-32 x .25"22 38765.1000 1 Drip Tray Assy (Includes strike plate and item 23)23 26801.0000 1 Grate, Drip Tray24 35277.0000 1 Schematic, Electrical38311 121207638311 111706ITEM PART NO. QTY. DESCRIPTION7* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.UPPER CABINET & PANELS1 35478.0000* 1 Cabinet (Not serviced) 24544.0000 10 Screw, Pan Head #8-182 34738.0000 1 Plate, Cabinet Mounting 01311.0001 4 Screw, Truss Head #8-32 x .25" Lkg.3 34784.0000 1 Plate, Bottom Closure 01359.0000 3 Screw, Flat Head #8-32 x .38"4 34362.0000 1 Bushing, Lower Hinge5 34790.0000 1 Wrap 01311.0001 4 Screw, Truss Head #8-32 x .25" Lkg.6 34785.0000* 1 Bracket, Hinge 01327.0000 3 Screw, Pan Head #10 -32 x .38"7 34666.0001 1 Catch, Door Latch 01382.0000 2 Screw, Truss Head #6 x .375"8 27394.0000 2 Plug9 00669.0002 4 Plug10 34419.0000 1 Coil, Water 24544.0000 4 Screw, Pan Head #8-1811 27246.0000 1 Sensor Assy, Temperature12 33669.0000 1 Clip, Adhesive Back13 33297.0000 1 Fan Assy. 03290.0000 1 Cable Tie 38616.0000 4 Screw, Pan Head #8-1814 34421.0000* 1 Cover, Fan 24544.0000 4 Screw, Hex Head w/Washer #10-2415 34422.1000 1 Shelf, Product (Includes items 16 & 17)16 33459.0003 2 Decal, Dispense/Rinse17 32461.0000 2 Gasket, Drip18 32455.0000 2 Knob19 27394.0000 2 Plug20 35930.0000 2 Nozzle21 32848.0000 2 O-ring22 35108.1000 2 Mixer, Spiral23 38519.0000 1 Decal, Dispense Ratio24 M2568.1000 - Grease, USDA H-1 (Use when assembling items 21 & 22)38311 121207838311 062905ITEM PART NO. QTY. DESCRIPTION9* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 1 35164.1000 1 Air Filter2 29951.0001 1 Condenser 02335.0001 4 Screw, Crimptite #8 x .38"3 35180.0001 1 Tube (Requires brazing to install) (Not serviced)4 35386.0001 1 Tube (Requires brazing to install) (Not serviced)5 00396.0002 1 Tee (Requires brazing to install) (Not serviced)6 35385.0001 1 Tube (Requires brazing to install) (Not serviced)7 35580.0001 1 Tube (Requires brazing to install) (Not serviced)8 35175.1000 1 Filter Dryer Assy (Requires brazing to install)9 35179.0001 1 Tube (Requires brazing to install) (Not serviced)10 32776.0000 1 Accumulator11 35581.0001 1 Tube (Requires brazing to install) (Not serviced)12 - - - - - - - - 1 Compressor (See COMPRESSOR COMPONENTS) 34529.0000* 4 Washer 00901.0000 4 Nut .25"-2013 - - - - - - - - 4 Grommet14 - - - - - - - - 4 Sleeve 15 33536.0000 1 Platform 01317.0003 4 Screw, Truss Head, Locking #8-32 x .38"16 - - - - - - - - 1 Fan Assy (See FAN ASSEMBLY) 27243.0000 3 Screw #8-36 x .437"17 34418.0000* 1 Bracket 01317.0003 4 Screw, Truss Head, Locking #8-32 x .38"18 28567.0000 1 Mounting Kit (Includes four each of items 13 & 14)19 M2332.1000 - Insulation, Tube 25/50 - 1.6"ID x .50" wall x 6.0 Ft (Use as required) 20 M2336.1000 - Insulation, Tube 25/50 - 0.25"ID x .19" wall x 6.0 Ft (Use as required)REFRIGERATION COMPONENTSOrder item 1838311 0303081038311 111706ITEMPART NO.QTY.DESCRIPTION11* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.COMPRESSOR COMPONENTS- 38231.1000 1 Compressor 120V (Includes items 1 - 5) 33522.1001 1 Compressor 230V (Includes items 1 - 5) 1 38897.0000 1 Relay, Compressor 120V 38897.0001 1 Relay, Compressor 230V 2 38917.0000 1 Overload Protector 3 38916.0000 1 Retainer 4 38918.0000 1 Clip 538896.00001Cover38311 1117061238311 062905ITEMPART NO.QTY.DESCRIPTION13* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.FAN ASSEMBLY- 32204.1001 1 Fan Assy 120V (Includes items 1-4) 32204.1002 1 Fan Assy 230V (Includes items 1-4) 1 33603.0000 1 Motor Assy 120V 33603.0001 1 Motor Assy 230V 2 33602.0000 1 Blade, Fan 3 27258.0000 1 Silencer 423700.00001Nut .25"-2038311 0629051438311 111706ITEMPART NO.QTY.DESCRIPTION15* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.WATER TANK ASSY1 35165.0000 1 Tank Assy - - - - - - - - 4 Screw2 35272.1001 1 Lid Assy 24544.0000 6 Screw, Pan Head #8-183 35526.0000* 2 Bracket 02332.0001 2 Screw, Crimptite #6 x .25" 01317.0003 2 Screw, Truss Head, Locking #8-32 x .38"4 34403.1001 1 Panel Assy 00973.0000 4 Nut, Keps #6-325 33801.0000 1 Grommet6 29327.0000 1 Probe, Temperature & Dry Plug7 33801.0002 1 Grommet 7 02536.0000 1 Grommet9 02645.1000 1 Probe, Liquid Level 01522.0000 1 Washer 20203.0100 1 Lockwasher, Internal-tooth #800908.0000 1 Nut #8-32 10 21275.0004 3 Clamp .54" - .64"11 20976.0062* 1 Tube, Silicone .38" ID x 1.75" (Order item 35) 1221275.0005 1 Clamp .62" - .73" 120V 21275.0009 1 Clamp .65" - .78" 230V 13 35077.0000 1 Tee .38" Sngl. Barb 14 21275.0003 4 Clamp .57" - .70"15 34325.0003* 1 Hose, Flex .38" ID x .625" OD x 3.0" (Order item 36) 16 33623.0000 2 Elbow .38" Barb17 34325.0006* 1 Hose, Flex .38" ID x .625" OD x 2.25" (Order item 36) 18 20976.0016* 1 Tube, Silicone .38" ID x 2.75" (Order item 35) 19 33068.0000 1 Fitting .38" Barb x .25" Barb20 37809.1000 1 Pump Assy 120V (Includes items 11 - 19) 37265.0000 1 Pump Assy 230V 21 35132.0000* 1 Product Coil22 34416.0000 2 Spacer 00973.0000 4 Nut, Keps #6-32 23 03290.0000 2 Cable Tie 2432734.00016Cable Tie, 28.0"(Continued)38311 0508071638311 111706ITEMPART NO.QTY.DESCRIPTION17* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.WATER TANK ASSY25 33533.0000* 4 Spacer 26 33519.0000* 1 Evaporator Coil 27 36448.0000 2 Spacer 28 03290.0000 2 Cable Tie29 33670.0004* 1 Tube, Clear .25" x 8.0" (Not serviced) 30 38605.0000 1 Tee31 21275.0006 1 Clamp .40" - .50" 32 35174.0000 1 Fitting 33 33149.0000 1 Gasket 34 00976.0000 1 Cap35 35106.0000 1 Manifold, Return Water36 20976.1000 1 Tube, Silicone .38" ID x 12.0" (Cut to required length) 20976.1001 1 Tube, Silicone .38" ID x 36.0" (Cut to required length) 20976.1002 1 Tube, Silicone .38" ID x 120.0" (Cut to required length) 37 34325.1000 1 Hose, Flex .38" ID x .625" OD x 12.0" (Cut to required length) 34325.1001 1 Hose, Flex .38" ID x .625" OD x 36.0" (Cut to required length)34325.10021Hose, Flex .38" ID x .625" OD x 120.0" (Cut to required length)38311 1117061838311 062905ITEMPART NO.QTY.DESCRIPTION19* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.1 - - - - - - - - 1 Coil, Upper Cabinet (See UPPER CABINET & PANELS)2 34325.0004* 2 Tube, Silicone .38" ID x 1.5" (Order item 10)3 21275.0003 8 Clamp .57" - .70"4 37850.0000 2 Elbow .38" Barb5 34325.0010* 1 Tube, Silicone .38" ID x 17.0" (Order item 10)6 34325.0021* 1 Tube, Silicone .38" ID x 8.0" (Order item 10)7 35173.0001 1 Fitting .312" Fl x .375" Barb8 35305.0000 1 Gasket9 - - - - - - - - 1 Manifold, Return Water (See WATER TANK ASSEMBLY) 10 34325.1000 - Tube, Silicone .38" ID x 12.0" (Cut to required length) 34325.1001 - Tube, Silicone .38" ID x 36.0" (Cut to required length) 34325.1002 - Tube, Silicone .38" ID x 120.0" (Cut to required length) 11M2337.1000-Tube Insulation (Cut to required length)CIRCULATION PUMP & LINES38311 1117062038311 111706ITEMPART NO.QTY.DESCRIPTION21* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.PRODUCT COIL & LINES1 - - - - - - - - 1 Product Coil (See WATER TANK ASSEMBLY)2 35305.0000 2 Gasket3 35173.0001 1 Fitting .312" Fl x .375" Barb4 21275.0003 8 Clamp .57" - .70"5 34325.0010* 1 Hose, Flex .38" ID x 17.0" (Order item 19)(Early models prior to Water Inlet Valve) 34325.0014* 1 Hose, Flex .38" ID x 15.0" (Order item 19)(Late models with Water Inlet Valve)6 33151.0004 1 Fitting, Elbow .38" Barb7 33149.0000 1 Gasket8 12757.0000 1 Nut9 01514.0000 1 Lockwasher 10 12756.0000 1 Fitting, Bulkhead11 35172.0001 1 Fitting, Elbow .312" Fl x .375" Barb 12 34325.0004* 1 Hose, Flex .38" ID x 1.5" (Order item 19) 13 37850.0000 1 Elbow .38" Barb14 34325.0012* 1 Hose, Flex .38" ID x 10.5" (Order item 19) 15 35171.0000 1 Valve, Shut Off 16 34540.0000 1 Decal, Caution - Close17 34325.0004* 1 Hose, Flex .38" ID x 1.5" (Order item 19) 18 34462.0000 1 Coupling, Quick Disconnect, Male19 34325.1000 1 Hose, Flex .38" ID x 12.0" (Cut to required length) 34325.1001 1 Hose, Flex .38" ID x 36.0" (Cut to required length) 34325.1002 1 Hose, Flex .38" ID x 120.0" (Cut to required length)20M2337.1000-Insulation, Tube 25/50 - 0.5"ID x .19" wall x 6.0 Ft (Use as required)38311 111706Early Models2238311 110107ITEMPART NO.QTY.DESCRIPTION23* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.DISPENSE PLATFORM ASSEMBLY1 38116.1000 1 Platform Assy (Includes items2 - 18) 2 - - - - - - - - 2 Pump Assy (See PUMP ASSY) 01338.0000 2 Screw, Truss Head #8-32 x .625" 01522.0000 4 Washer00991.0000 4 Nut, Elastic Lock #8-32 3 32957.0001 8 Bushing, Rubber 4 21275.0006 4 Clamp .40" - .50"5 38018.1000 2 Dispense Valve (See DISPENSE VALVE) 01308.0000 4 Screw, Truss Head #6-32 x 25"6 37786.0001 2 Plate 01308.0000 2Screw, Truss Head #6-32 x 25"7 - - - - - - - - 1 Manifold, Plain Water (See PLAIN WATER MANIFOLD) 8 - - - - - - - - 1 Manifold, Rinse Water (See RINSE WATER MANIFOLD) 9 32756.1000 2 Bottle Adapter (See BOTTLE ADAPTER) 01308.0000 4 Screw, Truss Head #6-32 x 25" 10 38122.0000* 1 Plate 01311.0001 4Screw, Truss Head #8-32 x .25" Lkg.11 32458.0000 2 Clip, Retainer 12 38104.0000 2 Thumbscrew 13 32454.0000 2 Fitting 1434087.00002O-ringThe following items are not illustrated 15 35189.0000 1 Harness, Dispense Platform 16 35181.0001 1 Harness, Dispense Valve 17 - - - - - - - - 4 Cable Tie (Not serviced) 1812422.00002Clamp38311 1101072438311 062905ITEMPART NO.QTY.DESCRIPTION25* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.DISPENSE VALVE ASSEMBLY- 38018.1000 1 Dispense Valve Assy (Includes items 1 - 24) 1 37801.0001 1 Body 2 37990.0000 1 Seal 3 37843.0000 1 Nozzle, Water4 32252.0000 1 Valve, Solenoid (Includes items5 - 10) 5 33554.0000 1 Solenoid Valve Coil6 28481.0000 1 Guide Kit (Includes Guide, Washer and O-ring)7 33585.0000 1 Solenoid Valve Base Kit (Includes O-ring and items 6 & 7) 8 01111.0002 1 Solenoid Valve Repair Kit (Includes Plunger, Spring and O-ring) 9 33580.0000 1 O-ring 10 33553.0000 1 O-ring11 37987.0000 1 Bracket 01308.0000 2 Screw #6-32 x .25" 12 32463.0000 1 Fitting, Elbow13 32849.0001 1 O-ring (Also use item 24) 14 37853.0000 1 Clamp 01308.0000 1 Screw #6-32 x .25" 15 32603.0000 1 Sleeve16 32852.0000 1 O-ring (Also use item 24) 17 32602.0000 1 Piston18 32853.0001 1 Spring, Flow Control 19 32624.0000 1 Bonnet, Adjuster 20 33725.0000 1 O-ring (Also use item 24) 21 32623.0000 1 Adjuster, Position 22 32851.0000 1 O-ring (Also use item 24) 23 37977.0000 1 Bracket, Water Adjustment 01308.0000 2 Screw #6-32 x .25"24M2568.1000-Grease, USDA H-1 (Use when assembling items 13,16,20 & 22)38311 1117062638311 111706ITEMPART NO.QTY.DESCRIPTION27* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.PLAIN WATER MANIFOLD (Early Models)1 32631.00002 Fitting, Straight 2 32849.0001 2 O-ring3 38129.0005* 2 Hose, Braided .25" ID x 2.25" (Order item 12)4 21275.0006 4 Clamp .40 - .50"5 36204.0000* 1 Manifold, Plain SST6 34325.0017* 1 Hose, Flex .38" ID x 1.25" (Order item 13)7 21275.0003 2 Clamp .57 - .70"8 34463.0000 1 Coupling, Quick Disconnect, Female12 38129.1000 1 Hose, Braided .25" ID x 12.0" (Cut to required length) 38129.1001 1 Hose, Braided .25" ID x 36.0" (Cut to required length) 38129.1002 1 Hose, Braided .25" ID x 120.0" (Cut to required length) 13 34325.1000 1 Hose, Flex .38" ID x 12.0" (Cut to required length) 34325.1001 1 Hose, Flex .38" ID x 36.0" (Cut to required length)34325.10021Hose, Flex .38" ID x 120.0" (Cut to required length)38311 1117062838311 111706ITEMPART NO.QTY.DESCRIPTION29* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.PLAIN WATER MANIFOLD (Late Models)38311 1117061 32631.00002 Fitting, Straight 2 32849.0001 2 O-ring3 38129.0012* 2 Hose, Braided .25" ID x 3.0" (Order item 8)4 21275.0006 6 Clamp .40 - .50"5 38605.0000 1 Tee .25" Barb6 38129.0013* 1 Hose, Braided .25" ID x 5.25" (Order item 8)7 34461.0000 1 Coupling, Quick Disconnect, Female8 38129.1000 1 Hose, Braided .25" ID x 12.0" (Cut to required length) 38129.1001 1 Hose, Braided .25" ID x 36.0" (Cut to required length)38129.10021Hose, Braided .25" ID x 120.0" (Cut to required length)3038311 111706RINSE WATER MANIFOLD & SOLENOID (Early Models) ITEM PART NO. QTY. DESCRIPTION1 32756.10002 Bottle adapter (See BOTTLE ADAPTER)2 38129.0001*3 Hose, Braided .25" ID x .44" OD x 1.50" (Order item 37)3 21275.0006 16 Clamp .40" - .50"4 36203.0000* 1 Manifold. Rinse SST5 34460.0000 1 Fitting, Quick Disconnect, Male6 34461.0000 1 Fitting, Quick Disconnect, Female7 32745.0021* 1 Hose .25" ID x .44" OD x 15.75" (Order item 38)8 33151.0005 3 Fitting, Elbow .25" Barb9 33149.0001 4 Gasket10 01085.0002 1 Solenoid Valve 120V (Includes items 11 - 14)28005.0000 1 Solenoid Valve 230V (Includes items 11- 13)01327.0000 2 Screw, Pan Head #10-32 x .38" 120V02308.0000 2 Screw, Pan Head #8-32 x .38" 230V11 28480.0000 1 Coil, Solenoid 120V28020.0000 1 Coil, Solenoid 230V12 01111.0002 1 Solenoid Repair Kit (Includes Plunger, Spring and O-ring)13 28479.0000 1 Solenoid Base Kit 120V (Includes O-ring)28021.0000 1 Core Assy Kit 230V14 28481.0000 1 Guide Kit15 00402.0001 2 Connector16 00425.0001 1 Nipple17 00425.0002 1 Nut18 38129.0001* 1 Hose, Braided .25" ID x .44" OD x 1.50" (Order item 37)19 00459.0000 1 Fitting, Bulkhead01532.0000 1 Lockwasher, Internal-toth .438"00463.0000 1 Nut, Hex .375"-2020 38129.0009* 1 Hose, Braided .25" ID x .44" OD x 4.25" (Order item 37)21 33149.0000 3 Gasket22 33151.0004 1 Fitting, Elbow .38" Barb23 21275.0003 4 Clamp .57" - .70"24 34325.0004* 1 Hose, Flex .38" ID x .595" OD x 1.5" (Order item 39)25 32749.0001 1 Tee .38" Barb x .38" Barb x .25" Barb(Continued)RINSE WATER MANIFOLD & SOLENOID (Early Models) ITEM PART NO. QTY. DESCRIPTION26 34325.0006* 1 Hose, Flex .38" ID x .595" OD x 2.25" (Order item 39)27 33150.0000 1 Nut28 33686.0000 1 Nipple29 23720.0000 1 Strainer Assy (Includes items 30 - 32)30 - - - - - - - - 1 Housing, Strainer (Order item 29)31 23721.0000 1 Screen32 23723.0000 1 End Cap33 21275.0006 2 Clamp .41 - .50"34 35573.0000* 1 Bracket, Rinse Solenoid (Early Models)01317.0003 2 Screw, Truss Head #8-32 x .38" Lkg35 32463.0000 2 Fitting, Elbow36 32849.0001 2 O-ring37 38129.1000 - Hose, Braided .25" ID x .44" OD x 12.0" (Cut to required length)38129.1001 - Hose, Braided .25" ID x .44" OD x 36.0" (Cut to required length)38129.1002 - Hose, Braided .25" ID x .44" OD x 120.0" (Cut to required length)38 32745.1002 - Hose .25" ID x .44" OD x 120.0" (Cut to required length)39 34325.1000 - Hose, Flex .38" ID x .595" OD x 12.0" (Cut to required length)34325.1001 - Hose, Flex .38" ID x .595" OD x 36.0" (Cut to required length)34325.1002 - Hose, Flex .38" ID x .595" OD x 120.0" (Cut to required length)ITEMPART NO.QTY.DESCRIPTIONRINSE WATER MANIFOLD & SOLENOID (Late Models)(Continued)1 32756.10002 Bottle adapter (See BOTTLE ADAPTER) 2 32849.0001 2 O-ring3 32463.0000 2 Fitting, Elbow4 38129.0009* 1 Hose, Braided .25" ID x 4.25" (Order item 40)5 21275.0006 8 Clamp .40" - .50"6 38129.0004* 1 Hose, Braided .25" ID x 3.50" (Order item 40)7 38605.0000 1 Tee .25" Barb8 38129.0001* 1 Hose, Braided .25" ID x 1.50" (Order item 40) 9 34460.0000 1 Fitting, Quick Disconnect, Male 10 34461.0000 1 Fitting, Quick Disconnect, Female11 32745.0021* 1 Hose .25" ID x 15.75" (Order item 39)(Early models prior to Water Inlet Valve) 38129.0014* 1 Hose .25" ID x 13.0" (Order item 40)(Late models with Water Inlet Valve) 12 01085.0002 1 Solenoid Valve 120V (Includes items 13 - 16) 28005.0000 1 Solenoid Valve 230V (Includes items 13- 15) 01327.0000 2 Screw, Pan Head #10-32 x .38" 120V02308.0000 2 Screw, Pan Head #8-32 x .38" 230V 1328480.0000 1 Coil, Solenoid 120V 28020.0000 1 Coil, Solenoid 230V14 01111.0002 1 Solenoid Repair Kit (Includes Plunger, Spring and O-ring) 15 28479.0000 1 Solenoid Base Kit 120V (Includes O-ring) 28021.0000 1 Core Assy Kit 230V 16 28481.0000 1 Guide Kit17 35573.0000* 1 Bracket, Rinse Solenoid (Early Models) 01317.0003 2 Screw, Truss Head #8-32 x .38" Lkg 18 00402.0001 1 Connector19 33151.0005 1 Fitting, Elbow .25" Barb 20 33149.0001 1 Gasket21 33152.0001 1 Fitting .38" Barb x .125" MPT22 34325.0022* 1 Hose, Flex .38" ID x 2.50" (Order item 41) 23 32750.0001 1 Tee .38" Single Barb24 34325.0021* 1 Hose, Flex .38" ID x 8.0" (Order item 41) 25 33686.0000 1 Nipple33150.00001NutRINSE WATER MANIFOLD & SOLENOID (Late Models) ITEM PART NO. QTY. DESCRIPTION26 21275.0003 5 Clamp .57" - .70"27 36203.0000* 1 Manifold. Rinse SST (Early Models)28 33149.0000 2 Gasket29 23720.0000 1 Strainer Assy (Includes items 30 - 32)30 - - - - - - - - 1 Housing, Strainer (Order item 29)31 23721.0000 1 Screen32 23723.0000 1 End Cap33 01533.0005 2 Spacer01326.0006 2 Screw, Truss Head #10-32 x .625"34 00464.0001 1 Elbow .25" Barb x .125"MPT35 34325.0004* 2 Hose, Flex .38" ID x 1.50" (Order item 41)36 35077.0000 1 Tee, Nylon .38" Barb37 36233.0000 1 Valve, Water Inlet 120V36233.0001 1 Valve, Water Inlet 230V32283.0000 2 Screw, Pan Head M4 x 6mm38 37297.0000 1 Elbow39 32745.1002 - Hose .25" ID x .44" OD x 120.0" (Cut to required length)40 38129.1000 - Hose, Braided .25" ID x .44" OD x 12.0" (Cut to required length)38129.1001 - Hose, Braided .25" ID x .44" OD x 36.0" (Cut to required length)38129.1002 - Hose, Braided .25" ID x .44" OD x 120.0" (Cut to required length) 41 34325.1000 - Hose, Flex .38" ID x .595" OD x 12.0" (Cut to required length)34325.1001 - Hose, Flex .38" ID x .595" OD x 36.0" (Cut to required length)34325.1002 - Hose, Flex .38" ID x .595" OD x 120.0" (Cut to required length)PUMP ASSEMBLYITEM PART NO. QTY. DESCRIPTION- 33803.1001 1 Pump Assy (Includes items 1 - 29)1 32613.1002 1 Motor Assy01322.0001 4 Screw #8-32 x 1.25"2 32654.0000 1 Magnet Hub01512.0000 1 Lockwasher, Internal-tooth #1001331.0004 1 Screw, Locking #10-32 x .50"3 33608.1000 1 Sensor, RPM02336.0000 2 Screw #4-40 x .38"4 07130.0000* 1 Cable Tie5 32957.0000 4 Bushing6 37152.0001 1 Mount Assy, Pump7 29904.0000 1 Insert, Well Nut #8-328 33781.0000 1 Gasket9 28755.0010* 1 Tube, Norprene .25" ID x 18.5" lg (Order item 17)10 32732.0000 1 Clamp .39"/.48"11 32656.0000 1 Fitting, Elbow .25" Barb x .38" Barb12 21275.0003 1 Clamp .57"/.70"13 34325.0019* 1 Hose, Flex .375" ID x 5.75" lg (Order item 18)14 28759.0000 1 Pump Assy. (Includes items 15 & 16)15 28794.0000 1 Rotor16 01370.0001 4 Screw, Pan Head #8-32 x 2.45"17 28755.1000 - Tube, Neoprene .25" ID x .45" OD x 12.0" (Use as required)28755.1001 - Tube, Neoprene .25" ID x .45" OD x 36.0" (Use as required)28755.1002 - Tube, Neoprene .25" ID x .45" OD x 60.0" (Use as required) 18 34325.1000 - Hose, Flex .375" ID x 12.0" (Use as required)34325.1001 - Hose, Flex .375" ID x 36.0" (Use as required)34325.1002 - Hose, Flex .375" ID x 120.0" (Use as required)19 39689.0000 - Pump Tube (Includes items 9,10,11,12 & 13)。
rohs欧盟标准各项参数英文回答：Restriction of Hazardous Substances (RoHS) Directive.The Restriction of Hazardous Substances (RoHS)Directive (Directive 2002/95/EC) is a European Union (EU) directive that restricts the use of certain hazardous substances in electrical and electronic equipment (EEE). The RoHS Directive was adopted in 2002 and has been amended several times since then. The latest amendment, Directive 2011/65/EU, came into force on 21 July 2011.The RoHS Directive currently restricts the use of the following six hazardous substances in EEE:Lead.Mercury.Cadmium.Hexavalent chromium.Polybrominated biphenyls (PBBs)。
Polybrominated diphenyl ethers (PBDEs)。
The RoHS Directive also restricts the use of certain phthalates in EEE. Phthalates are used as plasticizers in plastics. The RoHS Directive restricts the use of the following phthalates in EEE:Di(2-ethylhexyl) phthalate (DEHP)。
RoHS检测样品分类与拆分一、样品的分类将样品分成五类，具体情况如下：1．测试“塑料中的CrCl”此条曲线主要用来测试非金属中的Cr，主要包括：①、各种塑胶制品②、油墨、油漆、阻燃济，PCB板等③、陶瓷④、玻璃⑤、包装材料，木材，纸张等2．测试“钢铁中的CdHgPbCr”此条曲线主要用来测试①、各种普通钢、不锈钢制品，铁材等，②、以上几种金属的制件，如螺丝等,包括磁性材料等③、包括以铁为基材的电镀件（除镀锡件外）3．测试“有色金属中的CdHgPbCr”此条曲线主要用来测试①、各种青铜、黄铜、锌制品②、以上几种金属的电镀件（除镀锡件外）4．测试“焊锡中的CdHgPbCr”此条曲线主要用来测试①、各种锡的制品，如焊锡，焊点等②、各种表面镀锡金属部件，如：元器件金属腿，镀锡金属外壳等。
5．测试“镁铝中的CdHgPbCr”此条曲线主要用来测试①、各种铝，铝合金，镁铝合金制品②、以上合金的制件。
③、如果合金表面有非金属或有机涂层，应该使用“测塑胶及其他”项测试二、样品的拆分针对不同的样品，尤其是成品，我们应该怎样拆分呢？总体拆分原则：（1）．拆分的目标是通过适当的拆分手段来获得构成电子电气产品的均质材料。
需采取适当的拆分手段来获得均质材料，以确保拆分结果用于后续测试时，不会因为拆分不当而产生错误判断。
（2）．同一生产厂生产的相同功能、同规格参数的多个模块、部件或元器件可以归为一类，从中选取代表性的样品进行拆分，使用相同的材料（包括基材和添加剂）生产的不同部件可视为一个检测单元。
（3）. 颜色不同的材料应拆分为不同的检测单元。
（4）.对于相关法律法规中规定的豁免清单中的项目或材料，在拆分时应予以识别。
（5） .当拆分对象难以进一步拆分且重量≤10mg 时，不必拆分，作为非均质检测单元，直接提交检测。
（6）. 当拆分对象难以进一步拆分且体积≤1.2mm3 时，不必拆分，可以整体制样（如：0805 类贴片类元件2.0×1.2×0.5mm 的元件不必拆分）作为非均质检测单元，直接提交检测。
1. 目的/范围为了规范有害物质过程管理，使本公司所生产的产品符合RoHS 及相关化学物质限令要求，以达到满足客户的要求，制定了本程序；本程序是ISO9000质量管理体系及ISO14000环境管理体系在有害物质管理方面的补充，适用于本公司及相关方所有过程的有害物质的管理；2. 定义:2.1 RoHS:Restriction of certain Hazardous Substance 危害物质限用指令； 2.2 WEEE:Waste Electrical and Electronic Equipment 废电机电子产品指令； 2.3 HSF : Hazardous Substance Free 危害物质减免.3. 组织架构RoHS 管理小组成员： 组长：邹姣丽组员：赵凯，王芹，柏宜贤，彭小来，刘金丽，谢永华，吴献章，付蕾，张斌枝，王红娟，张平谋，彭龙4. 职责与权限 4.1 总经理- 本公司化学物质管理的最高管理者,负责文件的批准; - 决定组建或重组RoHS 管理小组;- 主持管理评审工作，负责定期对本程序的适用性、充分性、有效性进行评价;- 化学物质管理异常/事故的决策; - 化学物质管理的授权;4.2 RoHS管理小组成员- 负责协助总经理建立、实施和维持化学物质管理体系;- 负责编写、检讨及修订本程序；- 负责收集化学物质管理方面的相关法律法规、管理条例及客户要求；- 化学物质管理过程中相关问题的检讨与解决;- 化学物质管理异常的处理及纠正预防措施的提出与检讨;4.3 RoHS管理小组组长- 主持RoHS管理小组会议;- 负责向总经理报告化学物质管理问题,包括管理请示、异常、成绩等；- 负责化学物质管理方面对外沟通,包括外训联系、产品检测联系、客户及相关方的沟通；- 主导化学物质管理异常处理;4.4 项目\工程部- 负责收集本部门与客户沟通过程中的化学物质管理相关的信息;- 产品设计开发过程中,优先选用不含有害化学物质的原材料和工艺,对含有害化学物质的原材料和工艺积极寻找不含有害化学物质的替代品;- 协助RoHS管理小组解决RoHS管理问题及处理异常;4.5 生产部- 严格按文件作业,生产过程不添加产品不允许及文件规定不允许含有的有害化学物质;- 对进行化学物质管理的产品要做好标示及追溯管理;- 协助RoHS管理小组解决RoHS管理问题及处理异常;4.6 品管部- 负责收集本部门与客户沟通过程中的化学物质管理相关的信息;- 负责从来料到生产到出货整个过程中化学物质的检验与监督;- 协助RoHS管理小组解决RoHS管理问题及处理异常;4.7 物流部- 负责收集本部门与供应商沟通过程中的化学物质管理相关的信息;- 负责采购原料及辅料时与供应商确认所采购材料是否符合RoHS要求;- 协助RoHS管理小组解决RoHS管理问题及处理异常;4.8 管理部- 负责收集本部门与其他相关方沟通过程中的化学物质管理相关的信息;- 协助RoHS管理小组解决RoHS管理问题及处理异常;- 负责安排化学物质管理员、涉及化学物质使用及贮存的岗位与人员、各工序的检验人员必须对本程序及RoHS相关文件进行学习与培训；培训的作业流程按EIC-QEP-009《人力资源管理程序》执行；5. 管理承诺5.1 化学物质管理方针: 预防为主,过程控制,绿色输入,绿色输出.- 向公司全体员工、客户及相关方传达本方针的含义及重要性；- 本方针至少每年评审一次,以保证方针的适用性及有效性；5.2 化学物质管理目标：客户投诉化学物质含量不合格,0次/年;5.3化学物质管理指标5.3.1 来料化学物质含量不合格≤3次/年;5.3.2 过程化学物质含量不合格≤1次/年;5.3.3 出货化学物质含量不合格,0次/年;5.4 内部审核公司每年在进行ISO9000及ISO14000内部审核时,同时需对此管理程序进行审核,检查运行是否符合要求,每年至少一次.5.5 管理评审为确保化学物质管理体系持续的适宜性、充分性和有效性，特规定每年至少举行一次管理评审会议，用以评价本管理程序改进的机会和变更的需要;管理评审会议由总经理亲自主持,各部门主管及RoHS管理小组出席会议;管理评审输入:- 化学物质管理方针;- 化学物质管理目标指标;- 内审及外审结果;- 过程的业绩和产品的符合性；- 纠正预防措施的状况；-以往管理评审跟踪措施；-可能影响质量管理体系的变更;-改进和建议;管理评审输出:- 管理评审报告,包括各项输入的评审结果;-管理体系及其过程有效性的改进及措施；- 为满足此程序有效运行所需的资源；6. 过程管理6.1 采购及委外控制6.1.1 在供应商评估时,要对供应商进行化学物质管理评估,以确定其是否有能力提供符合RoHS要求的产品;并需签订RoHS协议6.1.2 对于有RoHS要求的产品,采购员在采购原料及其辅料时须在订单上注明RoHS要求,并将订单发往经评估符合RoHS要求的供应商;6.1.3 对于有RoHS要求的产品，在委外时，需在订单上注明RoHS要求,并将订单发往经评估符合RoHS要求的委外供应商;6.2 生产控制6.2.1 有RoHS要求的产品，其使用的原料及辅料必须符合RoHS要求；6.2.2生产现场RoHS及非RoHS产品及原料应有明显标示;6.2.3 RoHS产品在生产过程中不可使用脱模剂、清洗剂及其它化学物质；6.2.4 如果因产品或生产需要使用脱模剂、清洗剂或其它化学物质,需对生产出来的产品进行编号，并经检测合格后方可放行。
符合rohs医疗器械和设备(第8类)的要求下载提示：该文档是本店铺精心编制而成的，希望大家下载后，能够帮助大家解决实际问题。
文档下载后可定制修改，请根据实际需要进行调整和使用，谢谢!本店铺为大家提供各种类型的实用资料，如教育随笔、日记赏析、句子摘抄、古诗大全、经典美文、话题作文、工作总结、词语解析、文案摘录、其他资料等等，想了解不同资料格式和写法，敬请关注!Download tips: This document is carefully compiled by this editor. I hope that after you download it, it can help you solve practical problems. The document can be customized and modified after downloading, please adjust and use it according to actual needs, thank you! In addition, this shop provides you with various types of practical materials, such as educational essays, diary appreciation, sentence excerpts, ancient poems, classic articles, topic composition, work summary, word parsing, copy excerpts, other materials and so on, want to know different data formats and writing methods, please pay attention!符合RoHS医疗器械和设备(第8类)的要求RoHS（限制使用某些有害物质）指令旨在限制电子电气设备中的有害物质，以保护环境和人类健康。
皂液器欧洲标准
欧洲对于皂液器的标准主要涉及到安全性和环保方面，具体标准如下:
1. EN 1040:用于细菌和真菌的消毒性能测试标准。
这个标准通常适用于皂液器，因为皂液用于卫生目的。
2. EN 1500:用于手部卫生的手部消毒剂的测试标准。
如果您的皂液器用于手部卫生，可能需要符合这个标准。
3. EN 1276:食品、工业和家庭用途的细菌灭活剂的基本要求标准。
4. EN 1499:在医疗场所使用的手部消毒剂的基本要求标准。
5. EN 1498:用于外科手术手部消毒剂的基本要求标准。
6. EN 55014-1和EN 55014-2:这是欧盟的CE测试标准，涉及到电磁兼容性和辐射方面的要求。
7. EN 60335:这是欧盟的CE测试标准，涉及到家用和类似用途电器的安全性。
此外，根据欧盟的相关法规，皂液器必须符合欧盟委员会规定的包装和包装废弃物处理的指令。
这些指令包括对包装材料的限制和要求，以确保其对环境的影响最小化。
此外，欧盟还对包装的可回收性和可持续性提出了要求，以减少包装废弃物对环境造成的负面影响。
以上信息仅供参考，建议咨询专业人士获取更准确的信息。
制表：审核：批准：。
物料编码名称规格型号图形适用产品型号客户9.29.004.0012环保标贴80×48mm 字体大小：60×36（mm ）9.29.004.0013环保标贴40×24mm 字体大小：30×18（mm ）9.29.004.0014环保标贴20×12mm字体大小：15×9（mm）9.29.004.0015环保标贴10×6mm 字体大小：7.5×6（mm ）9.19.003.0502环保标贴椭圆40×16mm （环保）适用于符合RoHS 指令的所有美的洗碗机产品美的洗碗机有限公司9.29.004.0002环保标贴正三角形（边长为：44mm ）（灿坤滤波板专用）适用于符合RoHS 指令的所有灿坤滤波板产品灿坤滤波板公司9.29.004.0003环保标贴28×17mm(直通电池保护板专用)适用于符合RoHS 指令的所有直通电池保护板产品直通电池保护板公司环保标贴50×50mm （HR 产品的包装箱标识用）环保标贴10×10mm(HR 所有PCB 板标识用)目前使用的RoHS标签贴纸明细TOPBAND适用于符合RoHS 指令的所有海尔产品的标识。
海尔集团适用于客户无特殊要求的、本公司生产的、所有符合环保要求的产品，以及对供应商无特殊要求的、供给我司的、符合环保要求的元器件，包括未列出但与RoHS产品直接接触的物品（注：以前所有使用“Pb无铅”标贴的产品和原材料，一律用此类标贴取代。
）9.29.004.0001环保标贴120mm×80mm(美的电饭煲专用)适用于符合RoHS指令的所有美的电饭煲产品美的电饭煲公司9.29.004.0008环保标贴Φ30mm外圆和字体比例为：a:b=5:3（美的微波炉专用）适用于符合RoHS指令的所有美的微波炉的产品美的微波炉公司9.29.004.0009环保标贴长方形：70×100mm（环保）适用于提供给美的空气清新器公司的所有物料。
Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction Sample Description :Style/Item No.:Sample Receiving Date :Testing Period:====================================================================================Test Requested:Test Method :(1)(2)(3)(4)(5)Test Result(s):Conclusion:Test Report2009/12/089000SERIES PET INK*CE/2009/C2078*No.:CE/2009/C2078Date :2009/12/15Page :1of 6JUJO CHEMICAL CO.,LTD.6-10-22,AKABANE-NISHI,KITA-KU,TOKYO,115-0055,JAPANThe following sample(s)was/were submitted and identified by/on behalf of the client as :With reference to IEC 62321:2008Procedures for the Determination of Levels of Regulated Substances in Electrotechnical Products.Determination of Cadmium by ICP-AES.Please refer to next page(s).Determination of Lead by ICP-AES.Determination of Mercury by ICP-AES.Determination of Hexavalent Chromium by UV/Vis Spectrometry.Determination ofPBB and PBDE by GC/MS.2009/12/08TO 2009/12/15PLEASE REFER TO PAGE 3In accordance with the RoHS Directive 2002/95/EC,and its amendment directives.Based upon the performed tests by submitted samples,the test results comply with the limits of RoHS Directive 2002/95/EC and its subsequentamendments.Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction Result No.1n.d.2100n.d.21000n.d.21000n.d.21000n.d.-1000n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-n.d.-1000n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-n.d.5-JUJO CHEMICAL CO.,LTD.*CE/2009/C2078*Test results by chemical method (Unit:mg/kg)6-10-22,AKABANE-NISHI,KITA-KU,TOKYO,115-0055,JAPAN (1)Cadmium (Cd)Note ：1.mg/kg =ppm;0.1wt%=1000ppm3.MDL =Method Detection Limit (5)4."-"=Not Regulated2.n.d.=Not DetectedTribromodiphenyl ether Sum of PBDEsHexabromodiphenyl ether Heptabromodiphenyl ether Pentabromodiphenyl ether Tetrabromodiphenyl ether Monobromodiphenyl ether Dibromodiphenyl ether Dibromobiphenyl Decabromobiphenyl Pentabromobiphenyl Lead (Pb)Mercury (Hg)Hexabromobiphenyl Tetrabromobiphenyl Test Item (s):RoHS Limit Method (Refer to)MDL Test ReportNo.:CE/2009/C2078Date :2009/12/15Page :2of 6Octabromobiphenyl Nonabromobiphenyl NO.1:ORANGE INK Heptabromobiphenyl (4)Nonabromodiphenyl ether Monobromobiphenyl Tribromobiphenyl Octabromodiphenyl ether TEST PART DESCRIPTION:Decabromodiphenyl ether(3)(2)Hexavalent Chromium Cr(VI)by alkaline extraction Sum of PBBsUnless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction Style/Item No.Test ReportNo.:CE/2009/C2078Date :2009/12/15Page :3of 6JUJO CHEMICAL CO.,LTD.*CE/2009/C2078*6-10-22,AKABANE-NISHI,KITA-KU,TOKYO,115-0055,JAPAN9007OPAQUE WHITE BRIGHT RED(HL)9003LEMON YELLOW OPAQUE WHITE(HL)9013LEMON YELLOW RED(HL)9002YELLOW LEMON YELLOW(HL)9014YELLOW YELLOW(HL)9028ORANGE PINK(HL)9005BRIGHT RED GERANIUM(HL)9006BRIGHT RED VIOLET(HL)9008RED ORANGE(HL)9018GERANIUM DEEP BLUE(HL)9022MAGENTA BLUE(HL)9016PINK GREEN(HL)9025VIOLET BLACK(HL)9035SKY BLUE 9038RED 9045DEEP BLUE EXO YELLOW 9046BLUE EXO RED9075GREEN EXO DEEP YELLOW 9085MARINE BLUE EXOORANGE9092BLACKUnless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction No.:CE/2009/C2078Date :2009/12/15Page :4of 6JUJO CHEMICAL CO.,LTD.*CE/2009/C2078*6-10-22,AKABANE-NISHI,KITA-KU,TOKYO,115-0055,JAPANTest ReportTest Report No.:CE/2009/C2078Date:2009/12/15Page:5of6JUJO CHEMICAL CO.,LTD.*CE/2009/C2078* 6-10-22,AKABANE-NISHI,KITA-KU,TOKYO,115-0055,JAPANUnless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transactionUnless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company.This Test Report is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at /terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this Test Report is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction No.:CE/2009/C2078Date :2009/12/15Page :6of 6JUJO CHEMICAL CO.,LTD.*CE/2009/C2078*6-10-22,AKABANE-NISHI,KITA-KU,TOKYO,115-0055,JAPANTest Report**End of Report**。
