瑞麒G5多媒体导航系统推介资料[1]

CT-520 多媒体车载导航仪使用说明北京常天卫通科技有限公司 info@ 第 1 页 共 32 页CT-520 多媒体车载导航仪使用说明目录1.1 产品包装 ................................................................................................................................3 1.2 手册的使用 ............................................................................................................................4 2.1 产品外观 ................................................................................................................................4 2.2 为导航仪供电、充电 ............................................................................................................5 2.2.1 供电..................................................................................................................................5 2.2.2 使用电源适配器充电 .....................................................................................................6 2.2.3 使用车载电源适配器充电 .............................................................................................6 2.3 基本使用 ................................................................................................................................7 2.3.1 开、关电池......................................................................................................................7 2.3.2 开、关机.........................................................................................................................7 2.3.3 重新启动系统.................................................................................................................7 2.3.4 使用车载固定架固定导航仪 .........................................................................................8 2.3.5 使用车载天线.................................................................................................................9 2.3.6 使用触摸笔.....................................................................................................................9 2.3.7 使用音量调节旋钮 ........................................................................................................10 2.3.8 使用 SD/MMC 存储卡 ..................................................................................................10 2.3.9 热键................................................................................................................................11 2.4 与计算机通讯 ......................................................................................................................11 2.5 开机主界面及主要功能介绍 ..............................................................................................12 2.6 护理 GPS 导航仪 .................................................................................................................12 3.1 导航功能特色 ......................................................................................................................13 3.2 用前必读 ..............................................................................................................................13 4.1 功能特色 ..............................................................................................................................14 4.2 界面及操作 ..........................................................................................................................14 5.1 功能特色 ..............................................................................................................................17 5.2 界面及操作 ..........................................................................................................................17 6.1 功能特色 ..............................................................................................................................19 6.2 界面及操作 ..........................................................................................................................19 7.1 功能特色 ..............................................................................................................................21 7.2 界面及操作 ..........................................................................................................................22 8.1 音量设置 ..............................................................................................................................25 8.2 电源设置 ..............................................................................................................................25 8.3 背景光设置 ..........................................................................................................................26 8.4 时间和日期设置 ..................................................................................................................27 8.5 语言选择 ..............................................................................................................................28 8.6 系统信息 ..............................................................................................................................29北京常天卫通科技有限公司 info@ 第 2 页 共 32 页CT-520 多媒体车载导航仪使用说明1.1 产品包装GPS 包装盒内包含以下物品，请核对：主机电源适配器车载电源适配器MINI USB 连接车载天线耳机使用手册、保修卡触摸笔、保护套车载固定架（选配）以上所列物品请以实物为准。

瑞麒G5维修手册（底盘部分）安徽麒麟汽车销售有限公司售后服务部目录第一章技术参数 (1)一、轿车的型号、形式 (1)二、主要尺寸参数 (1)三、质量参数 (1)四、车轮定位参数 (2)五、轮辋型号与轮胎型号 (2)六、轮胎气压 (2)七、转向系统 (2)八、性能指标 (3)九、力矩清单 (3)第二章制动系统 (7)一、系统说明 (7)1、制动盘面检查 (7)2、制动盘厚度检查 (7)3、制动摩擦片厚度检查 (7)4、制动盘跳动量检查 (7)二、前制动器的拆装和检修 (8)1、系统结构图 (8)2、准备工作 (8)3、注意事项 (8)4、拆卸步骤 (9)5、安装步骤 (11)三、后制动器的拆装与检修 (12)1、系统结构图 (12)2、准备工作 (12)3、注意事项 (12)4、拆卸步骤 (12)5、安装步骤 (14)四、手制动的调整与更换拉索 (15)1、准备工作 (15)2、注意事项 (15)3、拆装及调整 (15)五、真空泵及真空罐的拆装 (18)1、准备工作 (18)2、拆装步骤 (18)六、ABS系统的维修 (20)2、注意事项 (20)3、系统说明 (21)4、拆卸步骤 (21)5、安装步骤 (21)第三章悬挂系统及四轮定位的调整 (23)一、前悬挂的拆装与检修 (23)1、系统结构图 (23)2、准备工作 (23)3、注意事项 (23)4、拆卸步骤 (24)5、安装步骤 (28)二、后悬挂的拆装与检修 (29)1、系统结构图 (29)2、准备工作 (29)3、注意事项 (29)4、拆卸步骤 (30)5、安装步骤 (33)三、四轮定位的调整 (34)1、准备工作 (34)2、前轮前束的调整 (34)3、前轮外倾角的调整 (35)4、主销后倾角和内倾角的调整 (35)5、后轮定位参数的调整 (35)四、轮胎的安装及气压调整 (36)1、装配气门嘴 (36)2、装配轮胎 (36)3、轮胎充气 (36)4、安装车轮及轮胎总成 (36)5、车轮螺母紧固方法 (36)第四章转向系统 (37)一、系统说明 (37)1、系统组成图 (37)2、转向机介绍 (37)二、准备工作 (38)三、注意事项 (38)四、转向机拆装 (38)1、拆卸步骤 (38)2、安装步骤 (39)五、转向柱管的拆装 (40)2、安装步骤 (41)六、转向器使用说明及调整 (42)第一章技术参数一、轿车的型号、形式二、主要尺寸参数三、质量参数四、车轮定位参数五、轮辋型号与轮胎型号六、轮胎气压七、转向系统八、性能指标九、力矩清单第二章制动系统一、系统说明行车制动系统由行车制动器、制动踏板机构及真空助力液压操纵系统及ABS系统等装置组成。

G5基座使用手册IM24H31-C 浙江中控技术股份有限公司声明⏹严禁转载本手册的部分或全部内容。

⏹在不经预告和联系的情况下，本手册的内容有可能发生变更，请谅解。

⏹本手册所记载的内容，不排除有误记或遗漏的可能性。

如对本手册内容有疑问，请与我公司联系，联系邮箱：SMS@。

商标中控、SUPCON、SPlant、 Webfield 、ESP-iSYS 、MultiF、InScan、SupField以上商标或标识均是浙江中控技术股份有限公司已经注册或已经申请注册或正在使用的商标和标识，拥有以上商标的所有权，未经浙江中控技术股份有限公司的书面授权，任何个人及企业不得擅自使用上述商标，对于非法使用我司商标的行为，我司将保留依法追究行为人及企业的法律责任的权利。

文档标志符定义警告：标示有可能导致人身伤亡或设备损坏的信息。

WARNING: Indicates information that a potentially hazardous situation which, if not avoided, could result in serious injury or death.电击危险：标示有可能产生电击危险的信息。

RISK OF ELECTRICAL SHOCK: Indicates information that Potential shock hazard where HAZARDOUS LIVE voltages greater than 30V RMS, 42.4V peak, or 60V DC may be accessible.防止静电：标示防止静电损坏设备的信息。

ESD HAZARD: Indicates information that Danger of an electro-static discharge to which equipment may be sensitive. Observe precautions for handling electrostatic sensitive devices注意：提醒需要特别注意的信息。

Basic PrincipleG SG -5/6 simulators can generate any combination of G PS, G LONASS, G alileo, BeiDou, QZSS, SBAS satellite signals un-der any condition simultaneously through a single RF out-put (type N connector). Configurations with higher channel counts generate new, modernized, signals on any of the navi-gation frequencies, including IRNSS, even those currently un-der development. Based on a test scenario that includes date, time and power levels, the generated signals correspond to any position on, or above, the earth (below the satellite orbits at approximately 20,000 km). It is easy to test dynamic condi-tions by defining a trajectory of the receiver under test. The simulator manages all the dynamics including relativistic effects.Test Solutions•Position/navigation accuracy •Dynamic range/sensitivity•Simulate movements/trajectories anyway on or above earth •Susceptibility to noise•Sensitivity to GPS impairments: loss of satellites, multi-path, atmospheric conditions, interference, jamming and spoofing •Conducted or over-the-air RF •GPS time transfer accuracy •Effect of leap second transition •Multiple constellation testing•Modernization signals/ frequencies •Hardware in the loop integrationGSG-5/6 SeriesAdvanced GNSS Simulators•Pre-defined or user-defined test scenarios•Full control over all test parameters•Front panel interface/stand-alone operation•Windows-based scenario builder software including Google Maps •Remote operation by Ethernet, GPIB, USB •Built-in or downloadable navigation files•Full control over trajectories and other dynamics •Up to 64 simultaneous signals•All GNSS constellations and frequencies•Accurate, adjustable power levels•Synchronization features to external devices or other simulatorsSimulation is simply the best way to test and verify proper operation of devices, systems and software reliant on global navigation satellite signals.Pendulum G SG -5/6 series simulators are easy-to-use, feature-rich and affordable to offer the best value compared to alternative testing tools or the limitations of testing from “live sky” signals. | *****************************•Constellations: GPS, GLONASS, Galileo, BeiDou, QZSS, IRNSS •Modulations: BPSK, QPSK, BOC (all)•SBAS: WAAS, EGNOS, GAGAN, MSAS, SAIF (included)•Spurious transmission: ≤40 dBc •Harmonics: ≤40 dBc•Output signal level: -65 to -160 dBm; 0.1 dB resolution down to -150 dBm; 0.3 dB down to -160 dBm•Power accuracy: ±1.0 dB •Pseudorange accuracy: Within any one frequency band:1 mm; Across different frequency bands: 30 cm•Inter-channel bias: Zero•Inter-channel range: >54 dB •Limits:Standard ExtendedAltitude18,240 m(60,000 feet)20,200,000 m (66,273,000 feet)Acceleration 4.0 g No limitsVelocity515 m/s (1000knots)20,000 m/s (38,874 knots)Jerk20 m/s3No limit •White noise signal level: -50 to -160 dBm; 0.1 dB resolution down to -150 dBm;0.3 dB down to -160 dBm. ±1.0 dB accuracy External Frequency Reference Input •Connector: BNC female•Frequency: 10 MHz nominal•Input signal level: 0.1 to 5Vrms•Input impedance: >1kΩFrequency Reference Output •Connector: BNC female•Frequency: 10 MHz sine•Output signal level: 1Vrms in to 50 Ω load External Trigger Input•Connector: BNC female•Level: TTL level, 1.4V nominalXPPS Output•Connector: BNC female•Rate: 1, 10, 100, 1000 PPS (configurable)•Pulse ratio: 1/10 (1 high, 9 low)•Output signal level: approx. 0V to +2.0V in 50 Ω load•Accuracy: Calibrated to ±10 nSec of RF timing mark output (option to reduce by a factor of ten with a characterization of offsets)Built-in TimebaseInternal Timebase – High Stability OCXO •Ageing per 24 h: <5x10-10•Ageing per year: <5x10-8•Temp. variation 0…50°C: <5x10-9•Short term stability (Adev @1s): <5x10-12 Auxiliary FunctionsInterface•GPIB (IEEE-488.2), USB 1.X or 2.X (SBTMC-488), Ethernet (100/10 Mbps)Settings•Predefined scenarios: User can change date, time, position, trajectory, number of satellites, satellite power level and atmospheric model •User defined scenarios: Unlimited •Trajectory data: NMEA format (GGA or RMC messages, or both), convert from other formats with GSG StudioView™ (see separate datasheet)General SpecificationsCertifications•Safety: Designed and tested for Measurement Category I, Pollution Degree 2, in accordance with EN/IEC 61010-1:2001 and CAN/CSA-C22.2 No. 61010-1-04 (incl. approval)•EMC: EN 61326-1:2006, increased test levels per EN 61000-6-3:2001 and EN 61000-6-2:2005 Dimensions•WxHxD: 210 x 90 x 395 mm(8.25” x 3.6” x 15.6”)•Weight: approx. 2.7 kg (approx. 5.8 lb) Optional Antenna•Frequency: 1000 to 2600 MHz •Impedance: 50 Ω•VSWR: <2:1 (typ)•Connector: SMA male•Dimensions: 15 mm diameter x 36 mm length Environmental•Class: MIL-PRF-28800F, Class 3•T emperature: 0°C to +50°C (operating); -40°C to +70°C non-condensing @ <12,000 m (storage)Humidity:•5-95 % @ 10 to 30°C•5-75 % @ 30 to 40°C•5-45 % @ 40 to 50°CPower•Line Voltage: 100-240 V AC, 50/60/400 Hz •Power Consumption: 40 W max.Simple Set-up and Operation Even the most inexperienced operator can configure scenarios on-the-fly without the need for an external PC and pre-compila-tion phase. Via the front panel, the user can swiftly modify parameters. Each unit comes with a license for GSG StudioView™ Windows software to graphically create, modify, and upload scenarios. A G oogle Maps interface makes trajectory creation easy. Trajectories can also be defined by recorded or generated NMEA formats. Connectivity Extends Ease-of-use and FlexibilityG SG simulators can be controlled via an Ethernet network connection, USB or GPIB. A built-in web interface allows complete operation of the instrument through front panel controls. It also al-lows for file transfers. Connectivity also supports the integration of G NSS simula-tion into a wide range of other applica-tions. There is an option to control signal generation in real-time through a simple command set. It can synchronize to ex-ternal systems in many other ways based on its precision timing capabilities and the ability to automatically download ephem-eris and almanac data via RINEX files. Input/OutputRF GNSS Signal Generation •Connector: Type N female•DC blocking: internal, up to 7 VDC; 470 Ωnominal load•Frequency bands:•L1/E1/B1/SAR: 1539 to 1627 MHz•L2/L2C: 1192 to 1280 MHz•L5/E5/B2: 1148 to 1236 MHz•E6/B3:1224 to 1312 MHz•Output channels:•1 (GSG-51); 4, 8, 16 (GSG-5); 32 (GSG-62),48, (GSG-63), 64 (GSG-64)•Any channel can generate anyconstellation or a derivative signal(multipath, interference, jamming)•Any set of 16 channels can generate withina frequency bandOptional FeaturesRecord and Playback (OPT-RP)This option provides the easiest way to create a complex scenario by recording satellite signals on a route. This option includes a recording receiver and software to automatically generate a simulation scenario that can be modified to ask ‘what if’ questions.•True life constellation replication •Automatic scenario generation•Ability to modify signal parameters •Compatible with any recording that includes NMEA 0183 RMC, GGA, and GSV sentences Real-time Scenario Generator (OPT-RSG) This option supports generation of 6DOF trajectory information via position, velocity, acceleration, or heading commands as the input for GPS RF generation. Vehicle attitude and attitude rate changes, as well as satellite power levels, are also controllable via real-time commands.•Control trajectories using 6DOF•Low fixed latency from command input to RF output•Hardware-in-the-loop applications •Includes sensor simulation optionRTK/DGNSS Virtual Reference Station (OPT-RTK)This option supports generation of RTCM correction data messages for testing an RTK / Differential-GNSS receiver.•Generates RTCM 3.x correction data via 1002, 1004, 1006, 1010, 1012, and 1033 messages•User settable base station location •Support for GNSS RTK receivers using serial interfacesHigh Velocity Option (OPT-HV)This option extends the limits for simulated trajectories. As of August 2014, the extended limits are no longer USA export controlled. (See Limits chart under Input/Output specifications.) Jamming Simulation (OPT-JAM)This option extends the capability of the standard interference simulation feature. Set noise or sweep types of interference and create a location-based jammer to test your system’s susceptibility.•Adjustable bandwidth and amplitude interference•Location-based jamming•Swept-frequency jammingeCall Scenarios (OPT-ECL)This option provides scenarios for testing eCall in vehicle systems per Regulation (EU) 2017/79.Sensor Simulation (OPT-SEN)This option generates sensor data in responseto a query according to the trajectory of theGPS RF simulation in real-time. See technicalnote for more details.•Simultaneously test GPS plus other sensorinputs to your nav system•Simulate data for accelerometers,gravimeters, gyroscopes and odometersOrdering InformationBase Configurations•GSG-51: Single channel GPS L1 generator(contact the factory for alternativeconstellations and upgrades to multi-channeland/or frequencies)•GSG-5: 4-channel GPS L1 simulator.Software options increase output channelsto 8 or 16, and adds GLONASS, BeiDou (B1),Galileo (E1), or QZSS constellations. Factoryupgradable to GSG-62 to add more channeland/or frequencies)•GSG-62: 32-channels and up to 2simultaneous frequency bands. Softwareoptions adds GLONASS, BeiDou, Galileo,QZSS or IRNSS constellations; and addssignals on other frequencies (P-code, L2,L2C, Galileo E5a/b, BeiDou B2)•GSG-63: 48-channels and up to 3simultaneous frequency bands. Samesoftware options as GSG-62•GSG-64: 64-channels and up to 4simultaneous frequency bands. Samesoftware options as GSG-62Included with instrument•User manual and GSG StudioView software(one license per unit) on CD•RF cable, 1.5 m•SMA to Type N adapter•USB cable•Certificate of calibration•3-year warranty1Optional Accessories•Option 01/71: Passive GNSS Antenna•Option 22/90: Rack-mount kit•Option 27H: Heavy-duty hard transport case•OM-54: User Manual (printed)•Additional StudioView licenses are availableOptional UpgradesConstellations•OPT-GLO: GLONASS Constellation•OPT-GAL: Galileo Constellation•OPT-BDS: BeiDou Constellation•OPT-QZ: QZSS Constellation•OPT-IRN: IRNSS Constellation (requires atleast GSG-62 and OPT-L5)Frequencies (requires at least GSG-62; non-GPS signals are enabled when constellationoption is installed)•Option L2: enables GPS L1P, GPS L2P, GLOL2 C/A•Option L2C: enables GPS L2C•Option L5: enables GPS L5, Galileo E5 a/b,BeiDou B2, IRNSS L5•Option L6: enables Galileo E6 b/cChannels/Simultaneous Frequencies2•Option 8: 4-channel to 8-channel upgrade•Option 16: 8-channel to 16-channel upgrade•Option 32/2: 16-channel to 32-channel, dualfrequency upgrade•Option 48/3: 32-channel to 48-channel, threefrequency upgrade•Option 64/4: 48-channel to 64-channel, fourfrequency upgradeApplication Packages (typical requirement for16 channel min)•OPT-RSG: Real-time scenario generator•OPT-HV: High velocity upgrade to extendedlimits•OPT-RP: Record and playback package•OPT-JAM: Jamming package•OPT-RTK: RTK virtual base station scenarios•OPT-SEN: Sensor simulation data via protocol(included with OPT RSG)•OPT-ECL: eCall scenariosOptional Services•Option 90/54:GSG Calibration Service•Option 95/05: Extended warranty to 5 years•GSG-INST: User Training and Installation•OPT-TIM: Timing Calibration Service1Warranty period and available services may vary dependent on country.2Option may require the unit to be returned to factory for upgrade.Models Channels # of Sim.Freq.Upgrade to nexthigher modelUpgradetypeConstellations and Signal T ypes Frequency BandsGSG-5111OPT-4Software GPS L1 C/A IncludedOthers if constellation is ordered:•GLONASS L1 C/A •QZSS L1•Galileo E1•BeiDou B11539-1627 MHz (L1)GSG-541OPT-8Software 8OPT-16Software 16OPT-32/2FactoryGSG-62322OPT-48/3Factory Same as aboveOptions if constellation andfrequency are ordered:•GPS L1P, L2P, GLONASS L2 C/A (OPT L2)•GPS L2C (OPT L2C)•GPS L5, IRNSS L5, Galileo E5a/b,BeiDou B2 (OPT L5)Same as above and 3 other ranges•1192-1280 MHz (L2)•1148-1236 MHz (L5)•1224-1312 MHz (E6/B3)GSG-63483OPT 64/4FactoryGSG-64644––Configuration SummaryOct 29, 2018 rev.2© 2018, Pendulum Instruments and OroliaSpecifications subject to change or improvement without notice.。