下载文档原格式
The ew 322 G3 consists of the same components as ew 312 G3but with a compact cardioid clip-on microphone.The ew 352 G3 consists of the same components as ew 312 G3but with a headworn cardioid microphone.FEATURESSturdy metal housing(transmitter and receiver)42 MHz bandwidth: 1,680 tunable UHF frequencies for interference-free reception20 frequency banks with up to 24 compatible frequenciesEthernet port for connecting to theWireless Systems Manager (WSM) software for control via computer High-quality true diversity receptionPilot tone squelch for eliminating RF inter- ference when transmitter is turned off Automatic frequency scan feature searches for available frequencies Enhanced AF frequency rangeIncreased range for audio sensitivity Wireless synchronization of transmitter parameter from receiverUser-friendly menu operation with more control optionsIlluminated graphic display, receiver also shows transmitter settingsAuto-Lock function avoids accidental changing of settingsHDX compander for crystal-clear sound Transmitter feature battery indicatation in 4 steps, also shown on receiver display Programmable Mute function Integrated Equalizer and Soundcheck modeContacts for recharging BA 2015 accupack directly in the transmitter Wide range of accessories adapts the system to any requirementThe ew 312 G3 is a wireless microphone set, consisting of a True Diversityreceiver, a bodyworn transmitter, a compact omni directional clip-on micropho-ne plus accessories.The bodypack transmitter features charging contacts for the optional recharge-able battery. Sync up the bodypack to the receiver wirelessly with the new wireless sync. Backlit graphic displays make them easy to read under all lighting conditions.ew 300 Setsew 312 G3 Presentation Set ew 322 G3 Presentation Set ew 352 G3 Head Setew 335/345/365 G3 Vocal SetsFEATURESew 335 G3/ew 345 G3/ew 365 G3 Vocal SetsSee above mentioned list of features plus Programmable Mute switch, easyaccessableHandheld transmitter with easy-exchangeable microphone heads from evolution series The ew 335 G3 is a wireless microphone set, consisting of a True Diversity receiver, a handheld transmitter with e 835 microphone head plus accessories. It is versatile for every style of music and presentations. A wireless link from receiver to the transmitter allows synchronization of frequencies for easy setup. Backlit graphic displays make them easy to read under all lighting conditions. The ew 345 G3 consists of the same components as ew 335 G3but with an e 845 microphone head.The ew 365 G3consists of the same components as ew 335 G3but with an e 865 microphone head.ARCHITECT’S SPECIFICATIONSew 312 G3 Presentation SetComplete plug & play wireless microphone set with clip-on microphone (condenser, omni-directional) from Sennheiser evolution series for multi-purpose application. The devices shall have metal housings for rugged use. 42 MHz bandwidth with 1,680 tunable frequencies. 20 banks with up to 24 compatible frequencies, 1 bank for individual selectable frequencies, scan function and wireless synchronization to the transmitter for easy setup. HDX compander delivers high-quality sound performance. All parameters of transmitter and receiver can be monitored and controlled via Wireless Systems Manager (WSM) software from PC. The transmitter shall have a sensitivity range of 48 dB. The receiver offers a maximum output level of +18 dBu (+6 dB gain). True Diversity and pilot tone squelch for interference-free reception. Charging contacts on transmitter for recharging BA 2015 accupack directly in the transmitter shall be available. 3-step battery + LowBattery indication on transmitter and receiver shall give reliable information on operation time.Menu operation, auto-lock function and illuminated graphic displays on transmitter and receiver for user-friendly operation.A RF Mute function on transmitter and receiver allows offline settings.An easy accessable Mute switch on the transmitter can be programmed for AF on/off, RF on/off.A suitable Remote Mute Switch option also allows push-to-talk and push-to-muteAn equalizer and soundcheck mode is inte g rated in the receiver.ew 322 G3 Presentation SetComplete plug & play wireless microphone set with clip-on microphone (electret, cardioid) from Sennheiser evolution series for multi-purpose application. Further discription see paragraph ew 312 G3.ew 352 G3 Head SetComplete plug & play wireless microphone set with headworn microphone (condenser, cardioid) for hands-free application. Further discription see paragraph ew 312 G3.ew 335 G3 Vocal SetComplete plug & play wireless microphone set with easy-exchangeable e 835 microphone head (dynamic, cardioid) from Sennheiser evolution series for multi-purpose application. Further discription see paragraph ew 312 G3.ew 345 G3 Vocal SetComplete plug & play wireless microphone set with easy-exchangeable e 845 microphone head (dynamic, supercardioid) from Sennheiser evolution series for multi-pur p ose application. Further discription see paragraph ew 312 G3.ew 365 G3 Vocal SetComplete plug & play wireless microphone set with easy-exchangeable e 865 microphone head (electret-condenser, supercardioid) from Sennheiser evolution series for multi-purpose application. Further discription see paragraph ew 312 G3.SySTEMRF frequency range ................................................516.....865 MHzTransmission/receiving frequencies ...................1,680Frequency banks ..................................................... 20 (factory presets)6 (user presets)Presets .......................................................................24 max.Switching bandwidth .............................................42 MHzCompander ...............................................................HDXSignal-to-noise ratio ..............................................> 115 dB(A)THD, total harmonic distortion ............................< 0.9 %RECEIvERAF Frequency response..........................................25…18,000 HzAntenna connectors ...............................................BNC, 50 OhmAudio outputs .......................................................... X LR: +18 dBu max6.3 mm jack: +10 dBu maxDimensions ...............................................................212 x 202 x 43 mmWeight .......................................................................980 gTRANSMITTERRF output power .....................................................10/30 mW switchableOperating time ........................................................typ. 8hInput voltage range ................................................1.8 v lineInput voltage range ................................................2.4 v lineDimensions ...............................................................82 x 64 x 24 mmWeight .......................................................................~ 160 gMICROPHONETransducer; Microphone type ...............................permanent polarizedAF sensitivity ...........................................................1.6 mv/PaFrequency response ...............................................80.....18,000 HzPick-up pattern ........................................................omni-directionalContinued on page 5EM 300Modulation ...............................................................wideband FMRF frequency range ................................................ 516 – 558, 566 – 608, 626 – 668, 734 –776, 780 – 822, 823 – 865 MHz Transmission/receiving frequencies ...................1,680, tuneable in steps of 25 kHzReceiving frequencies ............................................ 1,680 frequencies, tuneable in steps of 25 kHz20 frequency banks, each with up to 24 factory-preset channels,intermodulation-free20 frequency banks with up to 24 user programmable channelsSwitching bandwidth .............................................42 MHzNominal/peak deviation .......................................±24 kHz/±48 kHzReceiver principle ....................................................true diversitySensitivity (with HDX, peak deviation) .............< 2 μv for 52 dBA rms S/NAdjacent channel rejection ...................................typ. ≥ 75 dBIntermodulation attenuation ...............................typ. ≥ 70 dBBlocking .....................................................................≥ 75 dBSquelch ...................................................................... O ff, 5 to 25 dBμv, adjustable in steps of 2 dBPilot tone squelch ...................................................can be switched offAntenna inputs .......................................................2 BNC socketsCompander system .................................................Sennheiser HDXEQ presets (switchable, affect the line and monitor outputs):Preset 1: “Flat”Preset 2: “Low Cut” ................................................–3 dB at 180 HzPreset 3: “Low Cut/High boost” .......................... –3 dB at 180 Hz+6 dB at 10 kHzPreset 4: “High Boost” ...........................................+6 dB at 10 kHzS/N ratio (1 mv, peak deviation) ........................≥ 115 dBATHD .............................................................................≤ 0.9 %AF output voltage (at peak deviation,1 kHz AF) .................................................................. ¼” (6.3 mm) jack socket (unbalanced): +12 dBuXLR socket (balanced): +18 dBuAdjustment range of audio output level ........... 48 dB, adjustable in steps of 3 dB +6 dB gain reserveTemperature range .................................................–10 °C to +55 °CPower supply............................................................12 vPower consumption:...............................................350 mADimensions ...............................................................approx. 202 x 212 x 43 mmWeight (incl. batteries) .........................................approx. 980 gIn compliance with .................................................. C E, FCC, ETS 300422, ETS 300445MAINS UNITInput voltage............................................................100 to 240 v~, 50/60 HzPower/current consumption ................................max. 120 mAOutput voltage ........................................................12 vSecondary output current .....................................400 mATemperature range .................................................–10 °C to +40 °CIn compliance with .................................................. C E, FCC, IC, ETS 300422, ETS 300445Continued on page 6SK 300 and SKM 300Modulation ...............................................................wideband FMRF frequency range ................................................ 516 – 558, 566 – 608, 626 – 668, 734 –776, 780 – 822, 823 – 865 MHz Transmission/receiving frequencies ...................1,680, tuneable in steps of 25 kHzReceiving frequencies ............................................ 1,680 frequencies, tuneable in steps of 25 kHz20 frequency banks, each with up to 24 factory-preset channels, intermodulation-free6 frequency banks with up to 24 user programmable channelsSwitching bandwidth .............................................42 MHzNominal/peak deviation .......................................±24 kHz/±48 kHzFrequency stability .................................................≤ ±15 ppmRF output power at 50 O......................................typ. 10/30 mW, switchablePilot tone squelch ...................................................can be switched offAF characteristicsCompander system .................................................Sennheiser HDXAF frequency responseSK ................................................................................ m icrophone: 80 –18,000 Hzline: 25 –18,000 HzSKM ............................................................................80 –18,000 HzS/N ratio (1 mv, peak deviation) ........................≥ 115 dBATHD .............................................................................≤ 0.9 %Max. input voltage (SK) microphone/line ........3 vrmsInput impedance (SK) microphone/line ...........40 k O, unbalanced/1 M OInput capacitance (SK) ..........................................switchableAdjustment range of input sensitivity .............. S K: 60 dB, adjustable in steps of 3 dBSKM: 48 dB, adjustable in steps of 6 dBIn compliance with .................................................. C E, FCC, IC, ETS 300422, ETS 300445OvERALL DEvICETemperature range .................................................−10 °C to + 55 °CPower supply ........................................................... 2 AA size batteries, 1.5 v orBA 2015 accupackNominal voltage .....................................................2.4 vCurrent consumption: at nominal voltage ........typ. 180 mA (30 mW)with switched-off transmitter .............................≤ 25 μAOperating time .......................................................typ. 8 hrsDimensions ............................................................... S K: approx. 82 x 64 x 24 mmSKM: approx. Ø 50 x 265 mmWeight (incl. batteries) ......................................... S K: approx. 160 gSKM: approx. 450 gIn compliance with .................................................. C E, FCC, IC, ETS 300422, ETS 300445Continued on page 7Microphones (SK 300)ME 2ME 3-ew ME 4Microphone type .............................condenser condenser condenserSensitivity .........................................20 mv/Pa 1.6 mv/Pa40 mv/PaPick-up pattern ................................omni-directional cardioid cardioidMax. SPL ............................................130 dB SPL150 dB SPL120 dB SPL Microphone heads (SKM 300)MMD 835-1MMD 845-1MMK 865-1Radio microphone type .................dynamic dynamic condenserSensitivity ......................................... 2.1 mv/Pa 1.6 mv/Pa 1.6 mv/PaPick-up pattern ................................cardioid super-cardioid cardioid/super-cardioid,switchableMax. SPL ............................................154 dB SPL154 dB SPL152 dB SPL Frequency response .......................80.....18,000 Hz80.....18,000 Hz80.....18,000 HzDELIVERY INCLUDES for ew 312 / ew 322 / ew 352 G31 EM 300 G3 rack-mount receiver1 SK 300 G3 bodypack transmitter1 ME2 clip-on microphone (omni-directional) or1 ME 4 clip-on microphone (cardioid) or1 ME 3-ew headset microphone (cardioid)1 GA 3 rack mount1 NT2 power supply unit2 Antennas2 AA batteries1 Instruction manualDELIVERY INCLUDES for ew 335 / ew 345 / ew 365 G31 S KM 300-835 handheld transmitterwith cardioid dynamic head or1 S KM 300-845 handheld transmitterwith super-cardioid dynamic head or1 S KM 300-865 handheld transmitterwith super-cardioid condenser head1 EM 300 G3 rack receiver1 MZQ 1 microphone clip1 NT2 power supply unit2 Antennas1 GA 3 Rack mount kit2 AA batteries1 Instruction ManualPOLAR PATTERN0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 HzMMD 835-1MME 865-1MMD 845-10510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 Hz0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 HzME 3-ewME 4-ew0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 Hz0510152025dB30°30°60°60°90°90°120°150°120°150°0°180°125 Hz 250 Hz 500 Hz 1000 Hz2000 Hz 4000 Hz 8000 Hz 16000 HzPRODUCT VARIANTSew 312 G3 Presentation Set Cat. No. ew 312 G3-A-EU 516 – 558 MHz 503112 ew 312 G3-A-US 516 – 558 MHz 503330 ew 312 G3-G-EU 566 – 608 MHz 503331 ew 312 G3-G-US 566 – 608 MHz 503332 ew 312 G3-B-EU 526 – 668 MHz 503333 ew 312 G3-B-US 526 – 668 MHz 503334 ew 312 G3-C-EU 734 –776 MHz 503335 ew 312 G3-C-US 734 –776 MHz 503336 ew 312 G3-D-EU 780 – 822 MHz 503337 ew 312 G3-D-EU-X 780 – 822 MHz 503338 ew 312 G3-D-UK 780 – 822 MHz 503339 ew 312 G3-E-EU 823 – 865 MHz 503340 ew 312 G3-E-EU-X 823 – 865 MHz 503341 ew 312 G3-E-UK 823 – 865 MHz 503342 ew 312 G3-GB 606 – 648 MHz 504649 ew 322 G3 Presentation Set Cat. No. ew 322 G3-E-UK 823 – 865 MHz 503357 ew 322 G3-A-EU 516 – 558 MHz 503113 ew 322 G3-A-US 516 – 558 MHz 503345 ew 322 G3-G-EU 566 – 608 MHz 503346 ew 322 G3-G-US 566 – 608 MHz 503347 ew 322 G3-B-EU 626 – 668 MHz 503348 ew 322 G3-B-US 626 – 668 MHz 503349 ew 322 G3-C-EU 734 –776 MHz 503350 ew 322 G3-C-US 734 –776 MHz 503351 ew 322 G3-D-EU 780 – 822 MHz 503352 ew 322 G3-D-EU-X 780 – 822 MHz 503353 ew 322 G3-D-UK 780 – 822 MHz 503354 ew 322 G3-E-EU 823 – 865 MHz 503355 ew 322 G3-E-EU-X 823 – 865 MHz 503356 ew 322 G3-GB 606 – 648 MHz 504650 ew 352 G3 Presentation Set Cat. No. ew 352 G3-A-EU 516 – 558 MHz 503114 ew 352 G3-A-US 516 – 558 MHz 503360 ew 352 G3-G-EU 566 – 608 MHz 503361 ew 352 G3-G-US 566 – 608 MHz 503362 ew 352 G3-B-EU 526 – 668 MHz 503363 ew 352 G3-B-US 526 – 668 MHz 503364 ew 352 G3-C-EU 734 –776 MHz 503365 ew 352 G3-C-US 734 –776 MHz 503366 ew 352 G3-D-EU 780 – 822 MHz 503367 ew 352 G3-D-EU-X 780 – 822 MHz 503368 ew 352 G3-D-UK 780 – 822 MHz 503369 ew 352 G3-E-EU 823 – 865 MHz 503370 ew 352 G3-E-EU-X 823 – 865 MHz 503371 ew 352 G3-E-UK 823 – 865 MHz 503372 ew 352 G3-GB 606 – 648 MHz 504651ew 335 G3 Vocal Set Cat. No. ew 335 G3-A-EU 516 – 558 MHz 503115 ew 335 G3-A-US 516 – 558 MHz 503375 ew 335 G3-G-EU 566 – 608 MHz 503376 ew 335 G3-G-US 566 – 608 MHz 503377 ew 335 G3-B-EU 526 – 668 MHz 503378 ew 335 G3-B-US 526 – 668 MHz 503379 ew 335 G3-C-EU 734 –776 MHz 503380 ew 335 G3-C-US 734 –776 MHz 503381 ew 335 G3-D-EU 780 – 822 MHz 503382 ew 335 G3-D-EU-X780 – 822 MHz 503383 ew 335 G3-D-UK 780 – 822 MHz 503384 ew 335 G3-E-EU 823 – 865 MHz 503385 ew 335 G3-E-EU-X823 – 865 MHz 503386 ew 335 G3-E-UK 823 – 865 MHz 503387 ew 335 G3-GB 606 – 648 MHz 504652 ew 345 G3 Vocal Set Cat. No. ew 345 G3-A-EU 516 – 558 MHz 503116 ew 345 G3-A-US 516 – 558 MHz 503390 ew 345 G3-G-EU 566 – 608 MHz 503391 ew 345 G3-G-US 566 – 608 MHz 503392 ew 345 G3-B-EU 526 – 668 MHz 503393 ew 345 G3-B-US 526 – 668 MHz 503394 ew 345 G3-C-EU 734 –776 MHz 503395 ew 345 G3-C-US 734 –776 MHz 503396 ew 345 G3-D-EU 780 – 822 MHz 503397 ew 345 G3-D-EU-X780 – 822 MHz 503398 ew 345 G3-D-UK 780 – 822 MHz 503399 ew 345 G3-E-EU 823 – 865 MHz 503400 ew 345 G3-E-EU-X823 – 865 MHz 503401 ew 345 G3-E-UK 823 – 865 MHz 503402 ew 345 G3-GB 606 – 648 MHz 504653 ew 365 G3 Vocal Set Cat. No. ew 365 G3-A-EU 516 – 558 MHz 503117 ew 365 G3-A-US 516 – 558 MHz 503405 ew 365 G3-G-EU 566 – 608 MHz 503406 ew 365 G3-G-US 566 – 608 MHz 503407 ew 365 G3-B-EU 526 – 668 MHz 503408 ew 365 G3-B-US 526 – 668 MHz 503409 ew 365 G3-C-EU 734 –776 MHz 503410 ew 365 G3-C-US 734 –776 MHz 503411 ew 365 G3-D-EU 780 – 822 MHz 503412 ew 365 G3-D-EU-X780 – 822 MHz 503413 ew 365 G3-D-UK 780 – 822 MHz 503414 ew 365 G3-E-EU 823 – 865 MHz 503415 ew 365 G3-E-EU-X823 – 865 MHz 503416 ew 365 G3-E-UK 823 – 865 MHz 503417 ew 365 G3-GB 606 – 648 MHz 504654RECOMMENDED ACCESSORIESCat. No. ME 4-ew – Clip-on microphone,cardioid, black 503156 AM 2 – Antenna Mount kit 009912 CC 3 – System Case 503168L 2015 – Charging unit 009928 BA 2015 – Rechargeable battery pack 009950 ASA 1 – Active antenna splitter 503165 NT 1-1 – plug-in mains unit forASA 1 & L 2015 E U: 503158US: 503873UK: 503874 NT 3-1 – Plug-in mains unit for L 2015 E U: 503159US: 503876UK: 503877 A 1031-U – Antenna 004645A 2003-UHF – Directional Antenna 003658 AB 3 – Antenna booster 505550 Ear Set 1-ew – Ear-worn microphone,omni, black 504232 Ear Set 1-ew-3 – Ear-worn microphone,omni, beige 504237 Ear Set 4-ew – Ear-worn microphone,cardioid, black 504236 Ear Set 4-ew-3 – Ear-worn microphone,cardioid, beige 504234 MKE 1-ew – Clip-on microphone,omni-directional, black 502876 MKE 1-ew-1 – Clip-on microphone,omni, white 502877 MKE 1-ew-2 – Clip-on microphone,omni, brown 502878 MKE 1-ew-3 – Clip-on microphone, beige 502879 MKE 2-ew Gold – Clip-on microphone,omni, black 009831 MKE 2-ew-3 Gold – Clip-on microphone,omni, beige 009832 MKE 40-ew – Clip-on microphone,cardioid, black 500527Cat. No. HSP 4-ew – Headworn microphone,cardioid, black 009864 HSP 4-ew-3 – Headworn microphone,cardioid, beige 009867 HSP 2-ew – Headworn microphone,omni, black 009866 HSP 2-ew-3 – Headworn microphone,omni, beige 009872 CI 1 – Instrument cable 503163ew 335 / ew 345 / ew 365 G3 Vocal SetsMMD 835-1 – evolution microphone head 502575 MMD 845-1 – evolution microphone head 502576 MME 865-1 – evolution microphone head 502581 MZW 1 – Windshield 004839 KEN 2 – Identification rings 530195 LA 2 – Charging adapter forhandheld microphones 503162 CC 3 – System case 503168Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany 0 4 / 1 3 S e n n h e i s e r i s a r e g i s t e r e d t r a d e m a r k o f S e n n h e i s e r e l e c t r o n i c G m b H & C o . K G . w w w . s e n n h e i s e r . c o m . C o p y r i g h t ©0 4 / 2 0 1 3 . A l l r i g h t s r e s e r v e d . E r r o r s a n d o m i s s i o n s e x c e p t e d .Contact your local Service Partner:。
DELIVERY INCLUDES• EW-DX EM 2 rack receiver• 2 EW-DX SK bodypack transmitters • 2 MKE 2 lavalier microphones • 2 rod antennas• power supply with country adapters • 2 mic clamps • GA 3 rackmount set • 4 rubber feet• 2 BA 70 rechargeable battery packs • quick guide • safety guide• manufacturer declaration sheetFEATURES EW-DX EM 2• 2 channel half rack (9.5’)• Up to 88 MHz switching bandwidth • PoE IEEE 802.3af Class 3• Equidistant Channel Spacing: 146 channels in standardmode; 293 channels in Link Density Mode • Network enabled for control with Sennheiser ControlCockpit/media control system through a number of 3rd party modules • Clear and easy focused user interface with OLED display • Ethernet connectivity (IPv4 and IPv6)• Secure AES 256 encryption • External PSU 12V/1A • All-metal housingFEATURES EW-DX SK• 3,5 mm jack• 10mW RF power with up to 100m/328ft working range • Charging contacts for in-device charging with CHG 70N • Persistent eInk display - parameters visible on screeneven when device is not powered on • Programmable mute switch - customize the devicedepending on your professional needs • Extended runtime with lithium ion batteries - up to 12hours operation time • Mic input trim control • Metal housingDesigned for Those Who Appreciate Freedom of MovementThis wireless lavalier microphone set consists of 2 x EW-DX SK (wireless bodypack transmitter), 2 x MKE 2 (omni- directional clip-on lavalier microphone), 1 x EW-DX EM 2 rackmout receiver (2 channels) and 2 x BA 70 rechargeablebatteries.PRODUCT VARIANTSEW-DX MKE2 SET (Q1-9)470.2 - 550 MHz Art. no. 509314 EW-DX MKE2 SET (R1-9)520 - 607.8 MHz Art. no. 509315 EW-DX MKE2 SET (S1-10)606.2 - 693.8 MHz Art. no. 509316 EW-DX MKE2 SET (S2-10)614.2 - 693.8 MHz Art. no. 509319 EW-DX MKE2 SET (S4-10)630 - 693.8 MHz Art. no. 509320 EW-DX MKE2 SET (U1/5)823.2 - 831.8 MHz & 863.2 - 864.8 MHz Art. no. 509321 EW-DX MKE2 SET (V3-4)925.2 - 937.3 MHz Art. no. 509323 EW-DX MKE2 SET (V5-7)941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz Art. no. 509324 EW-DX MKE2 SET (Y1-3)1785.2 - 1799.8 MHz Art. no. 509327 ACCESSORIESEW-D ASA (Q-R-S)Active Antenna Splitter470 - 694 MHz Art. no. 508879 EW-D ASA (T-U-V-W)Active Antenna Splitter694 - 1075 MHz Art. no. 508880 EW-D ASA (X-Y)Active Antenna Splitter1350 - 1805 MHz Art. no. 508881 EW-D ASA CN/ANZ (Q-R-S)Active Antenna Splitter470 - 694 MHz Art. no. 508998EW-D AB (Q)Antenna Booster470 - 550 MHz Art. no. 508873 EW-D AB (R)Antenna Booster520 - 608 MHz Art. no. 508874 EW-D AB (S)Antenna Booster606 - 694 MHz Art. no. 508875 EW-D AB (U)Antenna Booster823 - 865 MHz Art. no. 508876 EW-D AB (V)Antenna Booster902 - 960 MHz Art. no. 508877 EW-D AB (Y)Antenna Booster1785 - 1805 MHz Art. no. 508878ADP UHF (470 - 1075 MHz)Passive directional antenna470 - 1075 MHz Art. no. 508863BA 70Rechargeable battery pack for SK and SKM-S Art. no. 508860 L 70 USB Charger for BA 70 rechargeable battery pack Art. no. 508861 EW-D CHARGING SET Set of L 70 USB charger and 2 BA 70 rechargeable battery packs Art. no. 508862 CHG 70N Network-enabled charger for SK, SKM and BA 70Art. no. 509455 CHG 70N + PSU KIT CHG 70N charger with NT 12-35 CS power supply unit Art. no. 509456 EW-D COLOR CODING SET Colored labels for wireless link identification for EM, SKM-S, SK Art. no. 508989 EW-D SK COLOR CODING Colored labels for wireless link identification for SK Art. no. 508990 EW-D SKM COLOR CODING Colored labels for wireless link identification for SKM-S Art. no. 508991 EW-D EM COLOR CODING Colored labels for wireless link identification for EM Art. no. 508992MICROPHONE COMPATIBILITYLavalier and headset microphones compatible with the EW-DX SK bodypack transmitterME 2Omni-directional lavalier microphoneModels produced from 2021 onward, featuring a gold-plated connector*ME 4Cardioid lavalier microphoneModels produced from 2021 onward, featuring a gold-plated connector*MKE Essential Omni Omni-directional lavalier microphoneMKE 2 Gold Omni-directional lavalier microphoneModels produced from 2018 onward, featuring a blue serial number plateMKE 1Omni-directional lavalier microphoneME 3Cardioid headset microphoneModels produced from 2021 onward, featuring a gold-plated connector*HSP Essential Omni Omni-directional headset microphoneHSP 2Omni-directional headset microphoneModels produced from March 2020 onward (featuring code 1090 or later)HS 2Omni-directional headset microphoneModels produced from 2021 onward, featuring a gold-plated connector*SL Headmic 1Omni-directional headset microphone* Models produced prior to 2021 will feature a nickel connector. Earlier models may pick up noise when placed close to the transmitter and are not recommended for useMKE 2 (Lavalier Microphone)Transducer principle pre-polarized condensor microphone Pick-up patternomni-directional Sensitivity (free field, no load) (1 kHz) 5 mV/Pa +- 3 dB Max. SPL at 1 kHz 142 dBFrequency response 20 to 20,000 Hz Equivalent noise level A-weighted 26 dB Connector 3.5 mm jack Cable length approx. 1.60 m Supply voltage7.5 VSPECIFICATIONSSystemAudio linkfrequency rangesQ1-9R1-9S1-10S2-10S4-10U1/5V3-4V5-7Y1-3470.2 - 550 MHz 520 - 607.8 MHz 606.2 - 693.8 MHz 614.2 - 693.8 MHz 630 - 693.8 MHz 823.2 - 831.8 MHz & 863.2 - 864.8 MHz 925.2 - 937.3 MHz 941.7 - 951.8 MHz &953.05 - 956.05 MHz &956.65 - 959.65 MHz 1785.2 - 1799.8 MHzBluetooth® Low Energy (BLE) frequency range 2402 - 2480 MHz Audio frequency response 20 Hz - 20 kHz (-3 dB)Audio THD ≤ -60 dB for 1 kHz @ -3 dBfs input level Dynamic range 134 dB System latency 1.9 ms Operating temperature -10 °C - +55 °C (14 °F - 131 °F)Relative humidity5 - 95 % (non-condensing)EW-DX EM 2 (Rack Receiver)Input voltage11 - 13 V ⎓ orPoE IEEE 802.3af Class 0(CAT5e or higher)Input current ≤ 1 ATransmit power (radiated)BLE: max. 10 mW EIRP Audio output power 18 dBu max.Headphone output 2x 70 mW @ 32 ΩEthernetRJ-45 socket, IEEE802.3100Base-TX (half+full duplex) 10Base-T (half+full duplex) (CAT5e or higher)Dimensions 212 x 44 x 189 mm (8.35" x 1.73" x 7.44")Weightapprox. 1000 g (2.2 l bs)(without antennas and power supply)EW-DX SK (Bodypack Transmitter)Input voltage 2.0 - 4.35 V Input current < 300 mAPower supply2 AA batteries 1.5 V(alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth 200 kHzTransmit power (radiated)Audio link: 10 mW ERP (Range Y1-3: 12 mW ERP)LD mode: 10 mW ERP BLE: max. 10 mW EIRP Dimensions(without antenna)63.5 x 85 x 20 mm (2.5" x 3.35" x 0.79")Weight (without batteries)approx. 115-120 g (0.26-0,27 - l bs)DIMENSIONSEW-DX EM 2DIMENSIONS EW-DX SK5907611785-1800 MHZ 203.8 / 8.02"590758941-960 MHZ 157.8 / 6.21"590757925-938 MHZ157.8 / 6.21"590756823-832 MHZ & 863-865 MHZ166.2 / 6.54"590755630-694 MHZ 195.8 / 7.71"590754614-694 MHZ195.8 / 7.71"590753606-638 MHZ & 650-694 MHZ195.8 / 7.71"590752606-694 MHZ 195.8 / 7.71"590751520-608 MHZ 217.8 / 8.57"470-550 MHZ 231.8 / 9.13"Teile-Nr.Part no.Frequenzbereich Frequency rangeL590750ARCHITECT‘S SPECIFICATIONEW-DX EM 2 rack receiverThe stationary two-channel receiver with switching diver-sity technology shall be for use with up to two companion transmitters as part of a digital wireless RF transmission system.The receiver shall operate within the following UHF fre-quency ranges, with a switching bandwidth of up to 88 MHz: 470.2 – 550 MHz, 520 – 607.8 MHz, 606.2 – 693.8 MHz, 614.2 – 693.8 MHz, 630 – 693.8 MHz, 823.2 – 831.8 MHz, 863.2 – 846.8 MHz, 925.2 – 937.3 MHz, 941.7 – 951.8 MHz, 953.05 – 956.05 MHz, 956.65 – 959.65 MHz, 1785.2 – 1799.8 MHz. Different frequency variants shall be available depending on country-specific regulations.The receiver shall feature Bluetooth® Low Energy (BLE) at a frequency range between 2402 and 2480 MHz for remote controlling the devices via a control App for iOS and And-roid.The receiver shall feature an automatic frequency setup function with spectrum scan functionality in order to es-tablish an equidistant frequency grid with 146 channels in standard mode and 293 channels in Link Density Mode. The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB). Audio total harmonic distortion (THD) shall be≤****************************************** shall be 134 dB. System latency shall be 1.9 ms.The receiver shall be menu-driven with an OLED display showing the current frequency, channel number, metering of RF level, metering of AF level, lock status, muting fun-ction, antenna switching diversity, app connection, gain, audio output level, menu and battery status for each of the two associated transmitters. An auto-lock feature shallbe provided to prevent settings from being accidentally altered.The following settings shall be configurable by function buttons and an encoder for each channel in the menu: frequency, channel name, gain, trim, AF output, low cut, AES 256 encryption, test tone, network settings, integrated antenna booster settings, display brightness, device name, auto setup settings for automatic frequency setup.For each of the two channels the receiver shall feature a balanced XLR-3M audio output with a maximum outputof +18 dBu along with an unbalanced 6.3 mm (¼“) audio output with a maximum output of +12 dBu.For secure transmission the receiver shall feature AES 256 encryption.The receiver shall provide a walktest mode for monitoring the RF and AF signal status in the location over time.Two BNC-type input sockets shall be provided for connec-ting the antennas. The receiver shall be usable with active and passive wide range UHF antennas for the entire sup-ported RF spectrum.A headphone output with headphone volume control shall be provided and shall utilize a 6.3 mm stereo jack socket. The receiver shall have an Ethernet port (RJ-45) for remote network-based monitoring and control using the Sennhei-ser Control Cockpit software or the Sennheiser Wireless Systems Manager software.The receiver shall operate on 12 V DC power supplied from the power supply unit or on Power over Ethernet (PoE IEEE 802.af Class 0). Power consumption shall be ≤ 1 A.The receiver shall have a rugged metal housing; dimensi-ons shall be approximately 212 x 44 x 206 mm (8.35“ x 1.73“ x 8.11“). Weight shall be approximately 1000 grams (2.2 lbs) without antennas and power supply. Operating tempera-ture shall range from −10 °C to +50 °C (+14 °F to +122 °F). The receiver shall be the Sennheiser EW-DX EM 2.EW-DX SK bodypack transmitterThe bodypack transmitter shall be for use with a compa-nion receiver as part of a digital wireless RF transmissionsystem.The bodypack transmitter shall operate within the follo-wing UHF frequency ranges, with a switching bandwidthof up to 88 MHz: 470.2 – 550 MHz, 520 – 607.8 MHz, 606.2– 693.8 MHz, 614.2 – 693.8 MHz, 630 – 693.8 MHz, 823.2– 831.8 MHz, 863.2 – 846.8 MHz, 925.2 – 937.3 MHz, 941.7– 951.8 MHz, 953.05 – 956.05 MHz, 956.65 – 959.65 MHz,1785.2 – 1799.8 MHz. Different frequency variants shall beavailable depending on country-specific regulations.The audio frequency response shall be between 20 Hz and20 kHz (-3 dB). Audio total harmonic distortion (THD) shallbe≤******************************************shall be 134 dB. System latency shall be 1.9 ms.Occupied bandwidth shall be 200 kHz. Transmit power(radiated) shall be 10 mW ERP (1785.2 – 1799.8 MHz Range:12 mW ERP).A programmable mute switch shall be provided for mutingor unmuting either the audio signal or the radio signal. Themute switch can also be deactivated.The bodypack transmitter shall be menu-driven with abacklit eInk display showing the relevant status informati-on such as frequency, battery status or AES 256 encrypti-on status.All transmitter parameters shall be adjustable with functi-on buttons on the device itself or by Bluetooth Low Energy(BLE) synchronization via the associated receiver. The fun-ction buttons shall be lockable against accidental misuse.Power shall be supplied to the bodypack transmitter bytwo 1.5 V AA size batteries or by one Sennheiser BA 70rechargeable battery pack. Operating time shall be typical-ly 12 hours with a battery pack and up to 8 hours with AAbatteries.The bodypack transmitter shall feature charging contactsfor direct charging of the transmitter with inserted BA 70battery pack in a Sennheiser CHG 70N network-enabledcharger.The bodypack transmitter’s microphone/line input shallutilize a lockable 3.5 mm Jack socket.The bodypack transmitter shall be compatible with micro-phones for every application: Sennheiser lavalier micro-phones ME 2, ME 4, MKE 1, MKE 2 Gold and MKE EssentialOmni, Sennheiser headset microphones HS 2, HSP 2, HSPEssential Omni, ME 3 and SL Headmic 1.The bodypack transmitter shall have a rugged metalhousing; dimensions shall be approximately 63.5 x 85 x 20mm (2.5” x 3.35” x 0.79“). Weight without batteries shallbe approximately 115 - 120 grams depending on antennalength. Operating temperature shall range from −10 °C to+50 °C (+14 °F to +122 °F).The handheld transmitter shall be the SennheiserEW-DX SK.Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · 。
High performance 802.11ac Wave 2 wirelessThe Cisco Meraki MR42 is a fourradio, cloud-managed 3x3 MU-MIMO 802.11ac Wave 2 access point. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR42 offers performance, security, and simple management.The MR42 provides a maximum 1.9 Gbps frame rate with concurrent 802.11ac Wave 2 and 802.11n 3x3:3 MIMO radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization. In addition, an integrated fourth radio delivers Bluetooth Low Energy (BLE) scanning and Beaconing functionality.With a combination of cloud management,high perfomance hardware, multipleradios, and advanced software features,the MR42 makes an outstanding platformfor the most demanding of uses today andtomorrow. These uses include high-densitydeployments and support for applicationslike voice and high-definition video.MR42 and Meraki cloudmanagement: a powerfulcombinationManagement of the MR42 is handledthrough the Meraki cloud, enablingrapid deployment across multiple siteswithout the need for time-consumingtraining or costly certifications. Since theMR42 is self-configuring and managedover the web, it can be deployed at aremote location in a matter of minutes,even without on-site IT staff.24/7 monitoring via the Meraki clouddelivers real-time alerts if the networkencounters problems. Remote diagnostictools enable immediate troubleshootingover the web, meaning multi-site, distributednetworks can be easily managed.The MR42’s firmware is automatically keptup to date via the cloud. New features, bugfixes, and enhancements are deliveredseamlessly over the web. This means nomanual software updates to download ormissing security patches to worry about.Product Highlights»3x3:3 MU-MIMO 802.11ac Wave 2»1.9 Gbps aggregate dual-band frame rate»24x7 real-time WIDS/WIPS and spectrum analytics via dedicated third radio»Integrated Bluetooth Low Energy Beacon andscanning radio»Enhanced transmit power and receive sensitivity »Full-time WiFi location tracking via dedicated 3rd radio »Integrated enterprise security and guest access»Application-aware traffic shaping»Optimized for voice and video»Self-configuring, plug-and-play deployment»Sleek, low-profile design blends into office environmentsMR42Dual-band 802.11ac Wave 2 access point with separate radios dedicated to security, RF management, and BluetoothAggregate data rate of up to 1.9 GbpsA 5 GHz 3x3:3 radio and a 2.4 GHz 3x3:3 radio offer a combined aggregate dual-band frame rate of 1.9 Gbps. Supports upto 1,300 Mbps in the 5 GHz band and 600 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR42 to support a higher client density than typical enterprise-class access points, resultingin fewer APs for a given deployment. Multi User Multiple InputMultiple Output (MU-MIMO)With support for the 802.11ac Wave 2 standard, the MR42 offers MU-MIMO for efficient transmission to multiple clients. Especially suited for enviroments with numerous mobile devices, MU-MIMO enables multiple clients to receivedata simultanously. This increasesthe total network perfomance and improves the end user experience.Third radio delivers 24x7 wireless security and RF analyticsThe MR42’s sophisticated, dedicateddual-band radio scans the environment continuously, characterizing RF interference and containing wireless threats like rogue access points. No longer choose between wireless security, advancedRF analysis, and serving client data: a dedicated third radio means that all three occur in real-time, without any impactto client traffic or AP throughput. Bluetooth Low Energy Beaconand scanning radioAn integrated fourth radio for Bluetooth Low Energy (BLE) provides seamless deployment of BLE Beacon functionality and effortless visibility of BLE devices. The MR42 enables the next generation of location-aware applications while futureproofing your deployment, making it ready for any new customer engagement strategies.Automatic cloud-based RF optimization The MR42’s sophisticated, automatedRF optimization means that there is noneed for the dedicated hardware andRF expertise typically required to tune awireless network. The RF analysis datacollected by the dedicated third radiois continuously fed back to the Merakicloud. This then automatically tunesthe MR42’s channel selection, transmitpower, and client connection settingsfor optimal performance under eventhe most challenging RF conditions.Integrated enterprise security andguest accessThe MR42 features integrated, easy-to-usesecurity technologies to provide secureconnectivity for employees and guests alike.Advanced security features such as AEShardware-based encryption and WPA2-Enterprise authentication with 802.1X andActive Directory integration provide wire-likesecurity while still being easy to configure.One-click guest isolation provides secure,Internet-only access for visitors. Our policyfirewall (Identity Policy Manager) enablesgranular access control at the group ordevice level. PCI compliance reports checknetwork settings against PCI requirementsto simplify secure retail deployments.Enterprise Mobility Management(EMM) & Mobile DeviceManagement (MDM) integrationMeraki Systems Manager natively integrateswith the MR42 to offer simple automaticsecurity that is context aware. Rapidlydeploy self-service MDM enrolment withoutinstalling additional equipment or dynami-cally tie firewall policies to client posture.End-to-end security has never been so easy.Application-aware traffic shapingThe MR42 includes an integrated layer 7packet inspection, classification, and controlengine, enabling you to set QoS policiesbased on traffic type. Prioritize your missioncritical applications, while setting limits onrecreational traffic, e.g., peer-to-peer andvideo streaming. Importantly, controls canbe implemented per network, per SSID,per user group, or per individual user.Voice and video optmizationsIndustry standard QoS features are easyto configure and come built in. WirelessMulti Media (WMM) access categories,802.1p, and DSCP industry standardsall ensure important applications getpriorotized correctly, not only on theMR42, but on other steps in the trafficflow. Unscheduled Automatic PowerSave Delivery (U-APSD) ensures minimalbattery drain on wireless VoIP phones.Low-profile, modern, userfriendly designDespite its extensive capabilities, theMR42 is packaged in a sleek, low-profileenclosure that blends seamlessly intoany environment. This makes it ideal formodern offices, high end retail locations,and discrete deployments. Using humaninterface design principles, even thephysical installation and mountingexperience has been developed to eliminateerror and simplify installation process.Self-configuring, self-maintaining,always up-to-dateWhen plugged in, the MR42 automaticallyconnects to the Meraki cloud, downloadsits configuration, and joins the appropriatenetwork. If new firmware is required,this is retrieved by the AP and updatedautomatically. This ensures the network ismaintained with bug fixes, security updates,and new features managed for you.Advanced analyticsDrill down into exceptional detail withhighly granular traffic analytics. Understandhow your network is used with access tonumerous datasets. Extend your visibilityto the physical world with journey trackingthrough location analytics. View vistornumbers, dwell time, repeat visit rates, andtrack trends. Fully customize your analysiswith raw data available via simple APIs.FeaturesSpecificationsRadios2.4 GHz 802.11b/g/n client access radio5 GHz 802.11a/n/ac client access radio2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio2.4 GHz Bluetooth radio with Bluetooth Low Energy (BLE) and Beacon supportConcurrent operation of all four radiosMax aggregate frame rate 1.9 Gbit/sSupported frequency bands (country-specific restric-tions apply):2.412-2.484 GHz5.150-5.250 GHz (UNII-1)5.250-5.350 GHZ (UNII-2)5.470-5.600, 5.660-5.725 GHz (UNII-2e)5.725 -5.825 GHz (UNII-3)AntennaIntegrated omni-directional antennas (5 dBi gain at 2.4 GHz, 5.5 dBi gain at 5 GHz)Individual antenna elements for each radio802.11ac Wave 2 and 802.11n Capabilities3 x 3 multiple input, multiple output (MIMO) with three spatial streamsSU-MIMO and MU-MIMO supportMaximal ratio combining (MRC) & beamforming20 and 40 MHz channels (802.11n), 20, 40, and 80 MHz channels (802.11ac)Up to 256-QAM on both 2.4 GHz & 5 GHzPacket aggregationPowerPower over Ethernet: 37 - 57 V (802.3at required with functionality-restricted 802.3af mode supported) Alternative 12 V DC inputPower consumption: 20W max (802.3at)Power over Ethernet injector and DC adaptersold separatelyLED IndicatorsMulti color & multi function status indicatorInterfaces1x 10/100/1000Base-T Ethernet (RJ45)1x DC power connector (5.5 mm x 2.5 mm,center positive)MountingAll standard mounting hardware includedDesktop, ceiling, and wall mount capableCeiling tile rail (9/16, 15/16 or 1 ½” flush or recessedrails), assorted cable junction boxesBubble level on mounting cradle for accurate horizon-tal wall mountingPhysical SecurityTwo security screw options (included)Kensington lock hard pointConcealed mount plate with anti-tamper cable bayEnvironmentOperating temperature: 32 °F to 104 °F (0 °C to 40 °C)Humidity: 5 to 95% non-condensingPhysical Dimensions10.0” x 6.1” x 1.5” (253.4 mm x 155.8 mm x 37.1 mm), notincluding deskmount feet or mount plateWeight: 25 oz (0.7kg)SecurityIntegrated Layer 7 firewall with mobile device policymanagementReal-time WIDS/WIPS with alerting and automaticrogue AP containment with Air MarshalFlexible guest access with device isolationVLAN tagging (802.1q) and tunneling with IPsec VPNPCI compliance reportingWEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1XEAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIMTKIP and AES encryptionEnterprise Mobility Management (EMM) & MobileDevice Management (MDM) integrationQuality of ServiceAdvanced Power Save (U-APSD)WMM Access Categories with DSCP and802.1p supportLayer 7 application traffic identification and shapingMobilityPMK and OKC credential support for fastLayer 2 roamingDistributed or centralized layer 3 roamingAnalyticsEmbedded location analytics reporting anddevice trackingGlobal L7 traffic analytics reporting per network, perdevice, per applicationWarrantyLifetime hardware warranty with advanced replace-ment includedOrdering InformationMR42-HW: Meraki MR42 Cloud Managed 802.11ac APMA-PWR-30W-XX: Meraki AC Adapter for MR Series(XX = US, EU, UK or AU)MA-INJ-4-XX: Cisco Meraki 802.3at Power over Ether-net Injector (XX = US, EU, UK or AU)Note: Meraki access point license required.Compliance & StandardsIEEE Standards Array 802.11b802.11g802.11a802.11n802.11ac802.11h802.11i802.11e802.11k802.11r802.11uSafety ApprovalsUL 60950-1CAN/CSA-C22.2 No. 60950-1IEC 60950-1EN 60950-1UL 2043 (Plenum Rating)Radio ApprovalsFCC Part 15C, 15ERSS-247 (Canada)EN 300 328, EN 301 893 (Europe)AS/NZS 4268 (Australia/NZ)NOM-121 (Mexico)NCC LP0002 (Taiwan)For additional country-specific regulatory information, please contact Meraki salesEMI Approvals (Class B)FCC Part 15BICES-003 (Canada)EN 301 489-1-17, EN 55032, EN 55024 (Europe)CISPR 22 (Australia/NZ)VCCI (Japan)Exposure ApprovalsFCC Part 2RSS-102 (Canada)EN 50385, EN 62311, EN 62479 (Europe)AS/NZS 2772 (Australia/NZ)Signal Coverage Patterns。
3 Product Overview of MT613XOmni-polar, Low Power, 360 Degree Switch ICMT613X1 Product DescriptionThe MT613X family is produced with monolithic technology ，which builds AMR sensor &ASIC on one chip.The IC internally includes a Wheatstone bridge with magnetic film ,a current regulator for operating with supply voltage from 1.65V to 5.0V,a sleep/awake logic for low power consumption requirement,small signal amplifier and Schmitt trigger comparator with dynamic offset cancellation,and an output driver with push pull output.When combined with a magnet,it becomes a non-contact switch with low power consumption,high sensitivity and high reliability.All directions of horizontal magnetic field parallel to the electrode of the package can be detected by an arbitrary polarity.The MT613X family provide SOT-23for surface mount ，RoHS compliant.Part No.DescriptionMT613XATSOT-23, tape & reel (3000pcs/bag)4 Application￭Home appliances, Industrial ￭Position Detection ￭Proximity Switch ￭Smart Meter ￭Speed Detection ￭Handheld Device ￭Consumer Device2 Features￭Monolithic Technology￭360Degree AMR (Anisotropic Magneto Resistance)￭Omni-polar Switch￭ 1.65～5.0V Operating Vcc Range￭-40℃~125℃Operating Temperature ￭Package Option:SOT-23￭Magnetic Sensitivity Option:B OP =±18Gs,B RP =±13Gs￭Push Pull &Open Drain Output Option:MT6131&MT6132:Push Pull MT6133&MT6135:Open Drain ￭Operation Frequency Option:MT6131&MT6133:20Hz MT6132&MT6135:1KHz ￭Low Power Consumption￭RoHS Compliant:(EU)2015/8635. Pin Configurationand FunctionsV CCOut GND SOT-23123DescriptionPowerOutputPush Pull or Open DrainGroundFigure.1Pin Configuration & Functions 按钮SOT-23Top-ViewTO-92Top-ViewOUTVccGND321Table of Contents1Product Description (1)2Features (1)3Product Overview of MT613X (1)4Applications (1)5Pin Configuration and Functions (1)6Definition of Switching Function (3)7Function Description (3)8Feature Description (3)9Functional Block Diagram (4)10Electrical and Magnetic Characteristics (5)10.1Absolute Maximum Ratings (5)10.2Electrical Specifications (5)10.3Magnetic Characteristics (6)10.4ESD Ratings (6)10.5Characteristic Performance (6)10.6Typical Output Waveform (7)11Typical Application Circuit (7)12Power on Output Waveform (8)13Package Material Information (9)13.1SOT-23Package Information (9)14 Copy Rights and Disclaimer (10)Reversion History1Originally Version2 1.1 Version Update supply currentUpdate the marking spec of SOT-236 Definition of Switching FunctionVccNorthSouthFigure.2Omni-polar Switching FunctionFigure.2 shows the device functionality and hysteresis7 Function DescriptionB OP : Operating Point, Magnetic flux density applied on the branded side of the package which turns the output driver ON (V OUT =Low)B RP : Releasing Point, Magnetic flux density applied on the branded side of the package which turns the output driver OFF (V OUT =High )B HYST : Hysteresis Window, |B OP -B RP |8 Feature DescriptionThe MT613X series is sensitive to the magnetic field that is parallel to the package (X & Y axis). To operate the MR switch, the magnetic field should be applied to the sensor parallel to the package. MT613X series detect the magnetic field in any parallel direction, but it does not respond to magnetic field in the vertical direction.Figure.3Detection of magnetic fieldB OP N B RP N B OP SB RP S GND 按钮OUTVcc321Direction of magnetic field(N or S)9 Functional Block DiagramFigure.4Functional Block Diagram (MT6131&MT6132)VccOutGNDRegulatorSleep/AwakeLogicDynamic Offset CancellationAMP COMP Output DriverESDAMRAMRRegulatorSleep/AwakeLogicDynamic Offset CancellationAMP COMP Output DriverESDAMRAMRVccOutGNDFigure.5Functional Block Diagram (MT6133&MT6135)10.2 Electrical SpecificationsAt T A =-40~125℃, V CC =1.65V~5.0V (unless otherwise specified)Symbol Parameters Test Condition Min Typ Max Unit V CCSupply VoltageOperating1.65 3.60 5.00V I CC Supply CurrentMT6131 & MT6133, V CC =3.6V, ∣B∣<∣B RP ∣- 1.0 1.5uA MT6132 & MT6135, V CC =3.6V, ∣B∣<∣B RP ∣-11.015.0uA V OH Output High Voltage MT6131 & MT6132, V CC =5V,I OUT =5mA, ∣B∣>∣B OP ∣4.6--V V OL Output Low Voltage V CC =5V,I OUT =-5mA, ∣B∣>∣B OP ∣--0.4V I OFFOutput Leakage Current V OUT =5V, ∣B∣<∣B RP ∣--0.1uA T POPower on Time dV CC /dt>3.6V/us, B>B OP (MAX)-80120us F OPOperation Frequency MT6131 & MT6133, V CC =3.6V 1020-Hz MT6132 & MT6135, V CC =3.6V 0.5K 1K -Hz T AW Awake Time V CC =3.6V-16-us T SL Sleep Time MT6131 & MT6133, V CC =3.6V -50-ms MT6132 & MT6135, V CC =3.6V -1-ms D.C.Duty CycleMT6131 & MT6133, V CC =3.6V -0.03-%MT6132 & MT6135, V CC =3.6V- 1.50-%R THThermal Resistance of SOT-23-301-℃/W10 Electrical and Magnetic Characteristics 10.1 Absolute Maximum RatingsAbsolute maximum ratings are limited values to be applied individually, and beyond which theserviceability of the circuit may be impaired. Functional operability is not necessarily implied. Exposure to absolute maximum rating conditions for an extended period of time may affect device reliability.Symbol Parameters Min Max Units V CC Supply Voltage-7V V RCC Reverse Battery Voltage -0.4-V V OUT Output Voltage-7V I OUT Continuous Output Current -20mA T A Operating Ambient Temperature -40125℃T S Storage Temperature -50150℃T J Junction Temperature -165℃BMagnetic Flux Density1200Gs10.5 Characteristic PerformanceFigure.6Supply Current vs. TemperatureFigure.7Magnetic Characteristics vs. Temperature (B OP & B RP ) (At V CC =3.6V)Magnetic Field @ 90Degree & 180 DegreePart No.Symbol Min Typ Max Unit MT613X SeriesB OP -±18±28Gs B RP ±3±13-Gs B HYST-5-Gs10.3 Magnetic CharacteristicsAt T A =25℃, V CC =1.65V~5.0V (unless otherwise specified)10.4 ESD Ratings Symbol Reference Values Unit V ESDHuman-body model (HBM)AEC-Q100-0024000V Charged-device model (CDM)AEC-Q100-0111000VMagnetic Characteristics vs. Temperature (B HYST ) (At V CC =3.6V)Magnetic Field @ 90 Degree & 180 DegreeFigure.85101520253035-402585125150M a g n e t i c F i e l d I n t e n s i t y (G s )Bop (90 Degree)Brp (90 Degree)Bop (180 Degree)Brp (180 Degree)℃3691215-402585125150M a g n e t i c F i e l d I n t e n s i t y (G s )Bhyst (90 Degree)Bhyst (180 Degree)℃0.511.522.533.544.55-402585125150S u p p l y C u r r e n t (u A )Vcc=1.65V Vcc=3.6V Vcc=5.0V10.6 Typical Output WaveformMT6131AT as exampleBVTTHighLowFigure.10Digital Output vs. Magnetic Flux Density & Sampling PulseB OP SB RP S B RP N B OP NOnOffM a g n e t i c F l u xS a m p l i n g P u l s eO u t p u tFigure.9360 Degree Magnetic Characteristics (At V CC =3.6V, T A =25 ℃）10.5 Characteristic Performance (continued)Note: Output is not immediately updated until the chip wakes up from sleep mode and samples the input510152025153045607590105120135150165180195210225240255270285300315330345Bop Brp12 Power on Output WaveformV CC rise time < 1us, T PO is the time from the stable point of V CC to the valid point of outputFigure.13Power on Output Waveform∣B∣>∣B OP ∣∣B∣<∣B RP ∣T POM a g n e t i c F l u x V C CO u t p u t11 Typical Application CircuitFigure.11Typical Application Circuit Push Pull Output MT6131 & MT 6132OUTVccGND按钮321C 1=100nFC 2=1nFVccOutGNDFigure.12Typical Application Circuit Open Drain Output MT6133 & MT 6135OUTVccGND按钮321C 1=100nFC 2=1nFVccOutGNDR L = 100k Ω13 Package Material Information （For Reference Only –Not for Tooling Use ）13.1 SOT-23 Package InformationFigure.14SOT-23 Chip Marking SpecFigure.15SOT-23 Package DrawingSensing CenterSymbolDimensions in Millimeters Dimensions in Inches MinMaxMinMaxA 1.050 1.2500.0410.049A10.0000.1000.0000.004A2 1.050 1.1500.0410.045b 0.3000.5000.0120.020c 0.1000.2000.0040.008D 2.820 3.0200.1110.119E 1.500 1.7000.0590.067E1 2.6502.9500.1040.116e 0.950 TYP0.037TYPe1 1.800 2.0000.0710.079L 0.3000.6000.0120.024θ0︒8︒0︒8︒x 1.460TYP 0.057 TYP y 0.800 TYP 0.032TYP z0.600 TYP0.024 TYPGND按钮按钮XXXXOUTVcc321Y WXXXX YWDateCode: Y: Year W: Week Product ID14 Copy Rights and Disclaimer1.This document may not be reproduced or duplicated, in any form, in whole or in part without priorwritten consent of MagnTek. Copyrights © 2019, MagnTek Incorporated.2.MagnTek reserves the right to make changes to the information published in this document atanytime without notice.3.MagnTek’s products are limited for use in normal commercial applications. MagnTek’s products arenot to be used in any device or system, including but not limited to medical life support equipment and system.For the latest version of this document, please visit our website: 。
Data SheetAlcatel-LucentOmniSwitch 6560Stackable Multi-Gigabit Ethernet LAN Switch FamilyThe Alcatel-Lucent OmniSwitch™ 6560 Stackable Multi-Gigabit Ethernet LAN value switch family is an industry leading campus access solution for enterprise networks. With multi-gigabit ports for high-speed IEEE 802.11ac devices, 10GigE uplinks and 20 GigE stacking, the OmniSwitch 6560 is the right solution for your next generation network.Offering a design optimized for flexibility and scalability as well as low power consumption, the OmniSwitch 6560 is an outstanding edge solution. It uses the field-proven Alcatel-Lucent Operating System (AOS) to deliver highly available, secure, self-protective, easily managed and eco-friendly networks.The Alcatel-Lucent OmniSwitch 6560 family is embedded with the latest technology innovations, and offers maximum investment protection.Deployments benefiting from the OmniSwitch 6560 family are:• Edge of small-to-mid-sized networks • Branch office enterprise and campus workgroups • Residential and commercially managed services applicationsFeatures• 24-port and 48-port, PoE and non-PoE with fixed small form factor pluggable (SFP+) 10G interfaces • Support for 10 GigE stacking or 20 GigE stacking • Support for IEEE 802.3af, IEEE 802.3at and IEEE802.3bt compliant PoE • Internal modular AC redundant power suppliesManagement• AOS field-proven software with management through web interface(WebView), command line interface (CLI), and Simple Network Management Protocol (SNMP) • Supporting programmable AOS OpenFlow for the creation of specialized services.• Ethernet operations, administration and management (OA&M) support for service configuration and monitoring • Support by Alcatel-Lucent OmniVista™ 2500 Network Management System (NMS)OmniSwitch 6560-P24Z8OmniSwitch 6560-P24Z24OmniSwitch 6560-P48Z16Security• Flexible device and user authentication with Alcatel-Lucent Access Guardian (IEEE 802.1x/MAC/captive portal) with Host Integrity Check (HIC) enforcement• Enables deployment of comprehensive and secure BYoD services in enterprise networks such as guest management, device on-boarding, device posturing, application management and dynamic change of authentication (CoA).• Advanced Quality of Service (QoS) and Access Control Lists (ACLs) for traffic control, including an embedded denial of service (DoS) engine to filter out unwanted traffic attacks• Extensive support of user-oriented features such as learned port security (LPS), port mapping, Dynamic Host Configuration Protocol (DHCP) binding tables and User Network Profile (UNP) Performance and Redundancy• Advanced layer-2+ features with basic layer-3 routing for both IPv4 and IPv6+• Triple speed (10/100/1G/2.5G) user interfaces and fiber interfaces (SFPs)supporting 1000Base-X or 10GBase-Xoptical transceivers• 10 G uplinks• Wire-rate switching and routingperformance• High availability with virtual chassisconcept, redundant stacking links,primary/secondary unit failover,hot-swappable power options andconfiguration rollbackConvergence• Enhanced Voice over IP (VoIP) and videoperformance with policy-based QoS• Future-ready support for multimediaapplications with wire-rate multicast• Airgroup™ Network Services for Bonjourspeaking devices provides consistentexperience over wireless and wirednetworks• IEEE 802.3af, IEEE 802.3at and IEEE802.3btPoE support for IP phones, wireless LAN(WLAN) access points and video camerasBenefits• Meets any customer configuration needand offers excellent investment protectionand flexibility, as well as ease ofdeployment, operation and maintenance• Provides outstanding performance whensupporting real-time voice, data andvideo applications for converged scalablenetworks• Ensures efficient power management,reduces operating expenses (OPEX) andlowers total cost of ownership (TCO)through low power consumption anddynamic PoE allocation, which deliversonly the power needed by the attacheddevice• A field-upgradeable solution that makesthe network highly available and reducesOPEX• Fully secures the network at the edge atno additional cost• Enterprise-wide cost reduction throughhardware consolidation to achievenetwork segmentation and securitywithout additional hardware installation• Supports cost-effective installation anddeployment with automated switch setupand configuration and end-to-end virtualLAN (VLAN) provisioningTable 1. Available OmniSwitch 6560 modelsOS6560-P24Z81682N/A Internal AC Internal AC OS6560-P24Z2424244Included Internal AC Internal AC OS6560-P48Z1648164Included Internal AC Internal ACNotes:• All OmniSwitch Multi-Gigabit PoE ports comply with IEEE 802.3bt (75W) and IEEE 802.3bz standardsDetailed Product Features Simplified Management• Intuitive CLI in a scriptable BASH environment via console, Telnet or Secure Shell (SSH) v2 over IPv4/IPv6• Powerful WebView Graphical Web Interface via HTTP and HTTPS over IPv4/ IPv6+• Fully programmable RESTful web services interface with XML and JSON support. API enables access to CLI and individual mib objects• Integrated with Alcatel-Lucent OmniVista® products for network management• Full configuration and reporting using SNMPv1/2/3 to facilitate third-party network management over IPv4/IPv6• File upload using USB, TFTP, FTP, SFTP or SCP using IPv4/IPv6• Human-readable ASCII-based configurationfiles for off-line editing, bulk configurationand out-of-the-box auto-provisioning• Fully programmable OpenFlow 1.3.1 and1.0 agent for control of native OpenFlowand hybrid ports• Multiple microcode image support withfallback recovery• Dynamic Host Configuration Protocol(DHCP) relay for IPv4/IPv6• IEEE 802.1AB Link Layer DiscoverProtocol (LLDP) with Media EndpointDiscover (MED) extensions• Network Time Protocol (NTP)• DHCPv4 and DHCPv6 server managedby Alcatel-Lucent VitalQIP® DNS/DHCP IPAddress ManagementMonitoring and troubleshooting• Local (on the flash memory) and remoteserver logging (Syslog): event andcommand logging• IP tools: ping and trace route• Dying Gasp support via SNMP and syslogmessages• Loopback IP address support formanagement per service• Policy- and port-based mirroring• Remote port mirroring• sFlow v5 and Remote Monitoring (RMON)• Unidirectional Link Detection (UDLD),Digital Diagnostic Monitoring (DDM), andTime Domain Reflectometry (TDR)+ Future software developmentNetwork configuration• Remote auto-configuration download feature• Auto-negotiating 10/100/1000 ports automatically configure port speed and duplex setting• Auto MDI/MDIX automatically configures transmit and receive signals to support straight-through and crossover cabling • BOOTP/DHCP client allows auto-configuration of switch IP information for simplified deployment• DHCP relay to forward client requests to a DHCP server• IEEE 802.1AB Link Layer Discovery Protocol (LLDP) with MED extensions for automated device discovery• Multiple VLAN Registration Protocol (MVRP) for IEEE 802.1Q-compliant VLAN pruning and dynamic VLAN creation• Auto QoS for switch management traffic as well as traffic from Alcatel-Lucent IP phones • Network Time Protocol (NTP) for network-wide time synchronization• Virtual chassis up to 2 unitResiliency and high availability• Unified management, control and virtual chassis technology• Virtual Chassis 1+N redundant supervisor manager• Virtual Chassis In-Service Software Upgrade (ISSU)• Smart continuous switching technology • ITU-T G.8032/Y1344 2010: Ethernet Ring Protection• IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) encompasses IEEE 802.1D Spanning Tree Protocol (STP) and IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)• Per-VLAN spanning tree (PVST+) and 1x1 STP mode• IEEE 802.3ad/802.1AX Link Aggregation Control Protocol (LACP) and static LAG groups across modules• Virtual Router Redundancy Protocol (VRRP) with tracking capabilities• IEEE protocol auto-discovery• Bidirectional Forwarding Detection (BFD) for fast failure detection and reducedre-convergence times in a routed environment• Redundant and hot-swappable power supplies• Built-in CPU protection against malicious attacks• Split Virtual Chassis protection: Auto- detection and recovery of Virtual Chassis splitting due to one or more VFL or stack element failuresAdvanced securityAccess control• Alcatel-Lucent Access Guardian frameworkfor comprehensive user-policy-based NAC• Autosensing IEEE 802.1X multi-client,multi-VLAN support• MAC-based authentication for non-IEEE802.1X hosts• Web based authentication (captive portal):a customizable web portal residing on theswitch• User Network Profile (UNP) simplifies NACby dynamically providing pre-definedpolicy configuration to authenticatedclients — VLAN, ACL, BW• Secure Shell (SSH) with public keyinfrastructure (PKI) support• Terminal Access Controller Access-ControlSystem Plus (TACACS+) client• Centralized Remote Access Dial-InUser Service (RADIUS) and LightweightDirectory Access Protocol (LDAP)administrator authentication• Centralized RADIUS for deviceauthentication and network access controlauthorization• Learned Port Security (LPS) or MACaddress lockdown• Access Control Lists (ACLs); flow-basedfiltering in hardware (Layer 1 to Layer 4)• DHCP Snooping, DHCP IP and AddressResolution Protocol (ARP) spoof protection• ARP poisoning detection• IP Source Filtering as a protective andeffective mechanism against ARP attacks• Bring Your Own Device (BYoD) provideson-boarding of Guest, IT/non-IT issued andsilent devices. Restriction/Remediation oftraffic from non-compliant devices. UsesRADIUS CoA to dynamically enforce UserNetwork Profiles based on Authentication,Profiling, Posture check of devices.** with Aruba ClearPassConverged networksPoE• PoE models support Alcatel-Lucent IPphones and WLAN access points, as well asany IEEE 802.3af, IEEE 802.3at or 802.3btcompliant end device• Configurable per-port PoE priority andmax power for power allocation• Dynamic PoE allocation: Delivers only thepower needed by the powered devices(PD) up to the total power budget for mostefficient power consumptionQoS• Priority queues: Eight hardware-basedqueues per port for flexible QoSmanagement• Traffic prioritization: Flow-based QoS withinternal and external (a.k.a., remarking)prioritization• Bandwidth management: Flow-basedbandwidth management, ingress ratelimiting; egress rate shaping per port• Queue management: Configurablescheduling algorithms — Strict PriorityQueuing (SPQ), Weighted Round Robin(WRR)• Congestion avoidance: Support for End-to-End Head-Of-Line (E2E-HOL) BlockingProtection• Auto QoS for switch management trafficas well as traffic from Alcatel-Lucent IPphones• Three-color marker: Single/Dual Rate— policing with commit BW, excess BW,burst sizeSoftware DefinedNetworking (SDN)• Programmable AOS RESTful API• Fully programmable OpenFlow 1.3.1 and1.0 agent for control of native OpenFlowand hybrid ports• OpenStack networking plug-inLayer-2, Layer-3 Routingand MulticastLayer-2 switching• Up to 16k MAC Addresses• Up to 4000 VLANs• Up to 2000 ACLs• Latency: < 4 µs• Max Frame: 9216 bytes (jumbo)IPv4 and IPv6• Static routing for IPv4 and IPv6+• RIP v1 and v2 for IPv4; RIPng for IPv6+• Up to 256 IPv4 and 128 IPv6+ static andRIP routes• Up to 128 IPv4 and 16 IPv6+ interfacesMulticast• IGMPv1/v2/v3 snooping to optimizemulticast traffic• Multicast Listener Discovery (MLD) v1/v2snooping+• Up to 1000 multicast groups• IP Multicast VLAN (IPMVLAN) foroptimized multicast replication at theedge, saving network core resourcesNetwork protocols• DHCP relay (including generic UDP relay) • ARP • Generic User Datagram Protocol (UDP) relay per VLAN• DHCP Option 82 — configurable relay agent information+ Future software developmentTechnical SpecificationGigabit PoE port count 24 4824Multi-Gigabit port count241681G/10G SFP+ 44220G QSFP+ stacking ports220USB port 111Console port 111Primary slide-in PSU slot 111Backup slide-in PSU slot 111Fans 222File system flash 2 GB 2 GB 2 GBRAM 2 GB 2 GB 2 GBSwitch bandwidth (all ports,full-duplex)280 Gb/s304 Gb/s112 Gb/sSystem power consumption126W110W85WSystem heat dissipation 430 (BTU/h)375 (BTU/h)290 (BTU/h)Power consumption w/PoE600W920W300WHeat dissipation w/PoE2047 (BTU/h)3140 (BTU/h)1023 (BTU/h)Acoustics (dB) @27C*37-54 (dBA)45-55 (dBA)45-55 (dBA)Height 4.4 cm (1.73 in) 4.4 cm (1.73 in) 4.4 cm (1.73 in)Width 44 cm (17.33 in)44 cm (17.33 in)44 cm (17.33 in)Depth 35 cm (13.78 in)35 cm (13.78 in)35 cm (13.78 in)Weight 4.58 kg (10.1 lb) 4.67 kg (10.3 lb) 4.58 kg (10.1 lb)Operating temperature 0°C to 45°C (32°F to 113°F)0°C to 45°C (32°F to 113°F)0°C to 45°C (32°F to 113°F) Storage temperature -40°C to 85°C (-40°F to 185°F)-40°C to 85°C (-40°F to 185°F)-40°C to 85°C (-40°F to 185°F) Humidity (operating) 5% to 95% non-condensing5% to 95% non-condensing5% to 95% non-condensing* Acoustics levels vary depending on installed power supply.OmniSwitch 65606560 backup supplies and specificationsThe OmniSwitch 6560 24 & 48 port models offer a 1RU internal backup supply configuration where the redundant supply is installedin a power supply bay at the back of the unit.Description Modular 300-W AC powersupply. Provides system andPoE power to one 24-portPoE switch Modular 600-W AC PoE powersupply. Provides system andPoE power to one 24-portPoE switchModular 920-W AC PoE powersupply. Provides system andPoE power to one 48-portPoE switchDimensions (H x W x L) 4.0 cm x 7.3 cm x 18.5 cm(1.57 in x 2.87 in x 7.28 in)4.0 cm x 7.3 cm x 18.5 cm (1.57in x 2.87 in x 7.28 in)4.0 cm x 7.3 cm x 18.5 cm (1.57in x 2.87 in x 7.28 in)Weight 1.00 kg (2.2 lb) 1.04 kg (2.25 lb) 1.05 kg( 2.32 lb) Max with 1 PSU 215 W of PoE474 W of PoE810 W of PoE Max with 2 PSUs 515 W of PoE1074 W of PoE1730 W of PoEInput voltage/current 90 V to 136 V AC /2.65 A180 V to 264 VAC /1.5 A 90 V to 136 V AC /8.5 A180 V to 264 V AC/4.25 A90 V to 136 V AC/13 A180 V to 264 V AC/6.5 AMax output power/ current 300 W/5.5 A600 W/11 A920 W/16.88 A Power Supply Efficiency92%92%89%Fans 111IndicatorsSystem LEDs• System (OK) (chassis HW/SW status)• PWR (primary power supply status)• VC (virtual chassis primary)• LED segment display indicates the Virtual Chassis ID of the unit in the stack: 1 to 2Per-port LEDs• 10/100/1000: PoE, link/activity• 100/1000/2.5GE: link/activity• 100/1000/2.5GE: PoE status• SFP: Link/activity• Virtual Chassis (VFL): Link/activityCompliance and certifications Commercial EMI/EMC• 47 CRF FCC Part 15: 2015 Subpart B (Class A)• VCCI (Class A limits. Note: Class A with UTP cables)• ICES–003:2012 Issue 5, Class A• AS/NZS 3548 (Class A) - C-Tick• AS/NZS 3548 (Class A limits.Note: Class A with UTP cables)• CE-Mark: Marking for European countries (Class A limits. Note: Class A with UTP cables)• CE Emission consists of:EN 50581: Standard for technical documentation for RoHS recastEN 55022 (EMI and EMC requirement)EN 55024: 2010 (ITE Immunity characteristics)EN 61000-3-2 (Limits for harmonic current emissions)EN 61000-3-3EN 61000-4-2EN 61000-4-3EN 61000-4-4EN 61000-4-5EN 61000-4-6EN 61000-4-8EN 61000-4-11IEEE802.3: Hi-Pot Test (2250 V DC on all Ethernet ports)Safety agency certifications• CDRH Laser• Compliant with Restriction on Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE) directives.• EN 60825-1 Laser• EN 60825-2 Laser• UL 60950-1, 2nd Edition, Information Technology Equipment • CAN/CSA C22.2 No. 60950-1-07,2nd Edition, Information TechnologyEquipment• IEC 60950-1, with all National DeviationsUL-AR, ArgentinaAS/NZ TS-001 and 60950, AustraliaANATEL, BrazilCCC, ChinaUL-GS Mark, GermanyKCC, KoreaNOM-019 SCFI, MexicoCU, EAC, RussiaBSMI, TaiwanSupported standardsIEEE standards• IEEE 802.1D (STP)• IEEE 802.1p (CoS)• IEEE 802.1Q (VLANs)• IEEE 802.1ad (Provider Bridge) Q-in-Q(VLAN stacking)*• IEEE 802.1s (MSTP)• IEEE 802.1w (RSTP)• IEEE 802.1X (Port Based Network AccessProtocol)• IEEE 802.3i (10Base-T)• IEEE 802.3u (Fast Ethernet)• IEEE 802.3x (Flow Control)• IEEE 802.3z (Gigabit Ethernet)• IEEE 802.3ab (1000Base-T)• IEEE 802.3ac (VLAN Tagging)• IEEE 802.3ad (Link Aggregation)• IEEE 802.3ae (10 Gigabit Ethernet)• IEEE 802.3af (Power-over-Ethernet)• IEEE 802.3at (Power-over-Ethernet)• IEEE 802.3bt (Power-over-Ethernet)• IEEE 802.3az (Energy Efficient Ethernet)• IEEE 802.3bz (Multi-Gigabit Ethernet)ITU-T recommendations• TU-T G.8032/Y.1344 2010: Ethernet RingProtection (ERPv2)IETF RFCsRIP• RFC 1058 RIP v1• RFC 1722/1723/1724/2453 RIP v2 andMIB• RFC 1812/2644 IPv4 Router Requirement• RFC 2080 RIPng for IPv6*IP Multicast• RFC 1112 IGMP v1• RFC 2236/2933 IGMP v2 and MIB• RFC 2365 Multicast• RFC 3376 IGMPv3 for IPv6IPv6+• RFC 1886 DNS for IPv6• RFC 2292/2373/2374/2460/2462• RFC 2461 NDP• RFC 2463/2466 ICMP v6 and MIB• RFC 2452/2454 IPv6 TCP/UDP MIB• RFC 2464/2553/2893/3493/3513• RFC 3056 IPv6 Tunneling• RFC 3542/3587 IPv6• RFC 4007 IPv6 Scoped AddressArchitecture• RFC 4193 Unique Local IPv6 UnicastAddressesManageability• RFC 854/855 Telnet and Telnet options• RFC 959/2640 FTP• RFC 1350 TFTP Protocol• RFC 1155/2578-2580 SMI v1 and SMI v2• RFC 1157/2271 SNMP• RFC 1212/2737 MIB and MIB-II• RFC 1213/2011-2013 SNMP v2 MIB• RFC 1215 Convention for SNMP Traps• RFC 1573/2233/2863 Private InterfaceMIB• RFC 1643/2665 Ethernet MIB• RFC 1867 Form-based File Upload in HTML• RFC 1901-1908/3416-3418 SNMP v2c• RFC 2096 IP MIB• RFC 2131 DHCP Server/Client• RFC 2388 Returning Values from Forms:multipart/form-data• RFC 2396 Uniform Resource Identifiers(URI): Generic Syntax• RFC 2570-2576/3410-3415/3584 SNMP v3• RFC 2616 /2854 HTTP and HTML• RFC 2667 IP Tunneling MIB• RFC 2668/3636 IEEE 802.3 MAU MIB• RFC 2674 VLAN MIB• RFC 3023 XML Media Types• RFC 3414 User-based Security Model• RFC 3826 (AES) Cipher Algorithm in theSNMP User-based Security Model• RFC 4122 A Universally Unique IDentifier(UUID) URN Namespace• RFC 4234 Augmented BNF for SyntaxSpecifications: ABNF• RFC 4251 Secure Shell ProtocolArchitecture• RFC 4252 The Secure Shell (SSH)Authentication Protocol• RFC 4627 JavaScript Object Notation(JSON)• RFC 5424 The Syslog protocol• RFC 6585 Additional HTTP Status Codes Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view othertrademarks used by affiliated companies of ALE Holding, visit: /trademarks. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its affiliates assumes any responsibility for inaccuracies contained herein. © 2017 ALE International. All rights reserved. 201703230002EN Security • RFC 1321 MD5• RFC 1826/1827/4303/4305 Encapsulating Payload (ESP) and crypto algorithms • RFC 2104 HMAC Message Authentication • RFC 2138/2865/2868/3575 /2618 RADIUS Authentication and Client MIB • RFC 2139/2866/2867/2620 RADIUS Accounting and Client MIB • RFC 2228 FTP Security Extensions • RFC 2284 PPP EAP• RFC 2869/2869bis RADIUS Extension • RFC 4301 Security Architecture for IPQuality of service• RFC 896 Congestion control • RFC 1122 Internet Hosts• RFC 2474/2475/2597/3168/3246 DiffServ • RFC 3635 Pause Control • RFC 2697 srTCM • RFC 2698 trTCMOthers• RFC 791/894/1024/1349 IP and IP/Ethernet • RFC 792 ICMP • RFC 768 UDP• RFC 793/1156 TCP/IP and MIB • RFC 826 ARP• RFC 919/922 Broadcasting Internet Datagram • RFC 925/1027 Multi-LAN ARP/Proxy ARP • RFC 950 Subnetting • RFC 951 BOOTP • RFC 1151 RDP• RFC 1191 Path MTU Discovery • RFC 1256 ICMP Router Discovery • RFC 1305/2030 NTP v3 and Simple NTP • RFC 1493 Bridge MIB • RFC 1518/1519 CIDR• RFC 1541/1542/2131/3396/3442 DHCP • RFC 1757/2819 RMON and MIB • RFC 2131/3046 DHCP/BootP Relay • RFC 2132 DHCP Options • RFC 2251 LDAP v3• RFC 2338/3768/2787 VRRP and MIB • RFC 3021 Using 31-bit Prefixes • RFC 3060 Policy Core • RFC 3176 sFlow+ Future AOS software featureOS6560-P24Z8Multi-GigE fixed chassis in 1RU size. Includes 8 RJ-45 100/1G/2.5G BaseT HPoE, 16 RJ-45 10/100/1G BaseT PoE and 2xSFP+ (1G/10G) ports, 300W AC supply, power cord, user guides, and 19" rack mount hardware.OS6560-P24Z24Multi-GigE fixed chassis in 1RU size. Includes 24 RJ-45 100/1G/2.5G BaseT HPoE, 4xSFP+ (1G/10G) and 2x20G stacking ports, 600W AC supply, power cord, user guides, and 19" rack mount hardware.OS6560-P48Z16Multi-GigE fixed chassis in 1RU size. Includes 16 RJ-45 100/1G/2.5G BaseT HPoE, 32 RJ-45 10/100/1G BaseT PoE, 4xSFP+(1G/10G) and 2x20G stacking ports, 900W AC supply, power cord, user guides and 19" rack mount hardware.OS6560-BP-P OS6560-BP-P modular 300W AC PoE backup power supply. Provides system and PoE backup power to one OS6560 PoE switch. Ships with power cord.OS6560-BP-PH OS6560-BP-PH modular 600W AC PoE backup power supply. Provides system and PoE backup power to one OS6560 PoE switch. Ships with power cord.OS6560-BP-PXOS6560-BP-PX modular 900W AC PoE backup power supply. Provides system and PoE backup power to one OS6560 PoE switch. Ships with power cord.OS6560-CBL-40OS6560 20 Gigabit direct attached stacking copper cable (40 cm, QSFP+)OS6560-CBL-100OS6560 20 Gigabit direct attached stacking copper cable (100 cm, QSFP+)OS6560-CBL-300OS6560 20 Gigabit direct attached stacking copper cable (300 cm, QSFP+)SFP-10G-C1M 10 Gigabit direct attached copper cable (1m, SFP+)SFP-10G-C3M 10 Gigabit direct attached copper cable (3m, SFP+)SFP-10G-C7M10 Gigabit direct attached copper cable (1m, SFP+)WarrantyThe OmniSwitch 6560 family comes with a Limited Lifetime Warranty.Services and SupportFor more information about our Professional services, Support services, and Managed services, please go to /?services=EnterpriseServices&page=directory .。
Product Speci cationTL-WR300KIT300Mbps Wireless N Router andUSB Adapter KitStandardsFrequencySignal RateWireless Transmit Power Receive Sensitivity Wireless SecuritySystem RequirementsOperation ModeWAN ConnectionVPN Pass-throughForwardingDDNSAccess ControlFirewallInterfaceAntennaExternal Power SupplyDimensions( W x D x H )Certification Package Contents Environment IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4-2.4835GHz 11n: Up to 300Mbps(dynamic), 11g: Up to 54Mbps(dynamic),11b: Up to 11Mbps(dynamic)<20dBm (EIRP)270M: -68dBm@10% PER,130M: -68dBm@10% PER108M: -68dBm@10% PER,54M: -68dBm@10% PER11M: -85dBm@8% PER,6M: -88dBm@10% PER, 1M: -90dBm@8% PER64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK Windows 98SE, NT, 2000, XP , Vista™ or Windows 7, MAC® OS, NetWare®, UNIX® or Linux AP Router Dynamic IP/Static IP , PPPoE, L2TP/PPTP , BigPond Cable PPTP , L2TP Virtual Server, Port Triggering, DMZ Comexe, NO-IP Parental Control, Access Schedule SPI Firewall, IP Address Filter, MAC Address Filter , Domain Name Filter 1 10/100 WAN port, 4 10/100 LAN ports 2×5dBi Detachable Antennas 9VDC / 0.6A 192 x 130 x 33mm (for TL-WR841ND)CE, FCC, RoHSTL-WR841ND , TL-WN821N , 2 Omni-directional antennasPower supply unitResource CDQuick Installation Guide0°C~50°C (32°F~122°F); -40°C~70°C (-40°F~158°F)10%~90% non-condensing; 5%~95% non-condensingStandardsInterfaceWireless Signal Rates With Automatic Fallback Frequency Range Wireless Transmit Power Modulation TypeReceiver SensitivityAntenna TypeWireless Security CertificationsSupport Operating System Operating Temperature Storage Temperature Relative Humidity Storage Humidity Dimensions IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, CSMA/CA with ACKUSB 2.011n: 270/243/216/162/108/81/54/27Mbps135/121.5/108/81/54/40.5/27/13.5Mbps 130/117/104/78/52/39/26/13Mbps, 65/58.5/52/39/26/19.5/13/6.5Mbps11g: 54/48/36/24/18/12/9/6M（adaptive）， 11b: 11/5.5/2/1M（adaptive）2.4-2.4835GHz<20dBm(EIRP)OFDM/CCK/16-QAM/64-QAM270M: -68dBm@10% PER, 130M: -68dBm@10% PER 108M: -68dBm@10% PER, 54M: -68dBm@10% PER, 11M: -85dBm@8% PER,6M: -88dBm@10% PER1M: -90dBm@8% PEROmni Directional, internal64/128/152 bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES)CE, FCCWindows 7/Vsita/XP/20000°C~40°C (32°F~104°F)-40°C~70°C (-40°F~158°F)10% ~ 90%, non condensation5%~95% non-condensing3.4 x 0.9 x 0.4 (in.) 86.5mm x 24mm x 10mm。
