FocalTech CTP Solutions [兼容模式]

安捷伦科技实用解决方案通讯本期内容：OpenLAB LC 溶出度软件溶出度交流溶出杯直接加热 (DVH)自动化合规性引擎 (ACE)用于溶出度 UV 检测的光纤MQ 文档验证溶出度资质与 280-DS 更新DDG 在线会议12345678第 2 页继续OpenLAB LC 溶出度软件安捷伦 LC 溶出度软件是 OpenLAB 色谱数据系统中 ChemStation LC 版的扩充模块。

作为安捷伦 OpenLAB 分析软件套装的主要组成部分，LC 溶出度软件为可控环境下的分析工作提供了所有手段。

它提供了一个通用解决方案，采用企业内容管理 (ECM) 或数据存储软件，实现安全、集中的数据存储和管理。

这些灵活的解决方案正广泛运行于大型公司及较小规模的实验室。

现有的色谱方法可以很容易地整合到自动生成的分析序列中。

通用的参数集是运行自动分析和将溶出样品的序列数据转换为溶出度结果的基础。

这些溶出实验的设置与定量药物数据和溶出实验的测试条件有关。

此外，还要评估质量检查（如在设定时间点的上、下限）和认可标准的 Q 值。

这一通用方案使我们能够将相同的设置应用到不同的仪器上，以生成精确可靠的溶出度测试结果。

12OpenLAB：续其设置可依据药典方法进行，且适用于手动和全自动采集的溶出样品。

这些设置与经过验证的 LC 方法相结合，可方便地适用于使用不同仪器的不同实验室。

为满足分析要求，所有安捷伦 LC 色谱系列设备均可控制。

OpenLAB LC ChemStation软件提供了一种控制集成的 LC 系统中各种不同模块的手段。

而且，带 ISET 的新型 1290 Infinity LC 系统具有对不同设备（包括安捷伦 LC 模块和其它供应商仪器）的模拟功能，极大提高了系统的灵活性。

无需额外的验证步骤，即可将现有 LC 方法整合到我们的溶出度实验设置中。

新的系统可以实现更快速、更简便的溶出度分析。

使用内置的方法向导可轻松设置控制溶出样品分析的参数。

WARNINGRISK OF IMPROPER FLAME DETECTION•Install only in areas in accordance with the environmental and hazardous area ratings.•Carefully review mounting area and position in accordance with the Performance Appendix and the User Manual to ensure optimal flame detection regarding the angle of device and unobstructed view.•Avoid potential sources of direct or indirect radiation in the flame detector field of view.•Do not touch the sensors on the front of the electronics module.•Avoid direct sunlight into the flame detector window –use provided sunshade,aim flame detectors down at 40degrees or more when possible,and use multiple detectors to cover hazardous areas from different directions.•Avoid close proximity to rapid modulation/chopping of sunlight (creating moving dark shadows)as optical sensor performance can be reduced,e.g.close trees in the wind,rotating blades.•Use shielded cable for all wirings and ground the shield at one end as detailed in the Wiring section.•Keep all devices and wire runs away from mercury vapor lights,variable speed drives,radio repeaters and other sources of electromagnetic interference.•Follow local cabling and glanding rules.•Seal all unused conduit entries and install proper drains/traps by local codes.•Do not try to service parts inside the electronics module,there are no field serviceable parts,just modulereplacement.CAUTIONRISK OF PRODUCT DAMAGE•Do not install in an area where there are incidents of high mechanical damage.•Protect controllers and monitors from physical damage (forklifts,etc.).•Failure to follow all warnings cautions,and instructions may void the warranty.•To maintain IPX6integrity,seal conduit entries with thread sealantsuch as Loctite 565or approvedequivalent.WARNINGRISK OF EXPLOSION•Ensure power is off and no hazardous gases nor dusts are present before installing or opening the device.•Use only hazardous location approved plugs plugs M25or ¾’’NPT as marked on product.SPECIFIC CONDITIONS OFUSE:WARNINGELECTROSTATIC HAZARD,DO NOT RUB WITH DRY CLOTH•Contact the manufacturer for dimensional information on the flameproof joint specifications if repair is required.QUICKREFERENCE GUIDEfor Hazardous Location InstallationSeries Flame Detectors and associated Test LampsThe Honeywell®Analytics Flame Detectors and Test Lamps are hazardous area products.They are factory calibrated,and the robust sealed design with no moving parts allows for mounting in any orientation even in harsh environments.These products are available in either a 316Stainless Steel or Low Copper Aluminum.Nameplate TagRepresentative Markings are displayed in the figure below.Additional regional marks(such as South Korea and Russia)and installation specific marks(such as ABS)may also be present.See individual nameplates for specific approvals applicable to each product. Note:Some products require18in.of conduit.(See individual nameplate for specifics). Electrical Ratings•Test Lamps(battery powered):12VDC,600mA•FS10:12VDC;60mA•FS10-R-A:Max29VDC,120mA;Relay24VDC,1A•FS20X and FS24X Series:Max32VDC,150mA;Relay24VDC,1A •FS20XP and FS24XP:Consumption18-32VDC,500mA max;Relay 24VDC/AC,2A maximumInstalling the Flame DetectorAll products are provided with a flameproof and explosion-proof enclosure and have been approved for use in Class1and Zone1 environments as specified on the individual product nameplate tag. Note:NFPA72and other local codes have specific requirements for flame detectors installations and must be consulted as necessary.Must only be installed by appropriately trained and accredited personnel.1.Securely mount the detector using minimum1/4-20or M6sized fasteners.Note:We recommend angling all detectors down at least40degrees fromhorizontal.2.Loosen,but do not remove the set screw on the coverassembly.3.Loosen the3Philips screws and remove the electro-opticalDetector Module and place face up in a safe location.Note:Do not drop the Detector Module and do not touch the sensor array.4.Connect the cable gland or conduit to the detector enclosurevia the¾’’NPT or M25openings,as per national electricalcodes for the install location.Connect the appropriate wiresrated for minimum85ºC to the field connectors provided asper the wiring diagram on the cover of the electro-opticalDetector Module.Ensure the enclosure is properly grounded in accordance withall local codes.Use shielded cable for all communications connections andground one end of the shield following the product manual. 5.Configure following the product's User Manual andPerformance Appendix to this guide.Note:Refer to the fuel and sensitivity settings table to determine the correctconfiguration.6.Connect the field connectors back onto the electro-opticalDetector Module and secure the module into the enclosurewith the Philips screws.7.Install the cover and ensure the O-ring is compressed.Tighten the cap screw on the cover assembly.Make a roughField of View(FoV)adjustment by aiming the detector at thearea you want to cover.8.Tighten all bolts when product has been fully configured andtested accordance with the product manual.Note:Detector functionality and communication should be tested to confirmcorrect FoV and configuration in the final system.Generic NameplateViewWARNINGRISK OF EXPLOSIONDo not connect test lamps to external power sources.Test lamps are battery operated only.Do not open when explosive gases are present. Charging permitted in safe environment only.Contact UsAmericas SwitzerlandHoneywell Analytics Main Phone:+41216953000405Barclay Boulevard***************************** Lincolnshire,Illinois60069Tel:+18479558200Asia PacificToll free:+18005380363Honeywell Industrial Safety***********************434,Worldcup Buk-ro,Mapo-gu Europe,Middle East,and Africa Seoul03922Honeywell International Sarl South Korea Piece16Tel:+82(0)2690903001180Rolle**************************Manuals,software,and other information about thisproduct are available atCopyright©2022,1701M5000HL Rev E October11,2022。

Genesys全中文操作手册×××客服中心系统March 22, 20101 前言 ..................................................................... ........................... 5 2 系统运行...................................................................... ..................... 6 2.1 系统启动方式 ..................................................................... ..... 6 2.2 启动顺序 ..................................................................... ............ 6 2.3 系统工具部分 ..................................................................... ..... 6 3 Genesys系统描述 ..................................................................... ...... 7 3.1 Genesys系统服务器组成 ....................................................... 7 3.2 Genesys 数据库访问内容 . (7)3.3 Genesys应用说明及Port配置 ............................................... 8 4 Genesys License管理 ....................................................................8 4.1 License更新 ............................................................................ 9 4.2 License运行情况检查 ............................................................. 9 5 资源管理（CME） ................................................................ ......... 10 5.1 登录CME .................................................................... ......... 10 5.2 新建DN ..................................................................... ........... 10 5.3 删除DN ..................................................................... ........... 11 5.4 新增分机 ..................................................................... .......... 12 5.5 新增路由点 ..................................................................... ...... 13 5.6 新增队列 ..................................................................... .......... 14 5.7 新增话务员登录账号 ............................................................. 15 5.8 删除话务员登录账号 ............................................................. 16 5.9 新增位置 ..................................................................... .......... 17 5.10 删除位置 ............................................................................. 18 5.11 新增位置组 ..................................................................... ..... 18 5.12 新增人员 ..................................................................... ........ 20 5.13 删除人员 ..................................................................... ........ 22 5.14 新增话务员组 ......................................................................23 5.15 删除话务员组 ......................................................................242 北京白矾科技有限公司.6 系统运维管理（SCI）................................................................. ... 24 6.1 登录SCI .................................................................... ........... 24 6.2 应用程序管理 ..................................................................... ... 25 6.3 观察应用程序的信息 ............................................................. 25 6.4 启动单个应用程序 (26)6.5 停止单个应用程序 (26)6.6 管理日志 ..................................................................... .......... 27 6.7 主机管理 ..................................................................... .......... 29 6.8 观察主机的信息 ....................................................................297 实时资源监控（CCP） ................................................................ .. 30 7.1 登录CCP .................................................................... .......... 30 7.2 新建实时监控视图 (30)7.3 保存实时监控视图 (32)7.4 打开已保存的实时监控视图.................................................. 33 7.5 使用实时资源状态监视 (33)7.6 使用整体试图 ..................................................................... ... 35 7.7 使用试图模板设计 (38)8 历史报表管理—设计（CCA—DMA） ........................................... 42 8.1 登录DMA .................................................................... ......... 42 8.2 新增过滤器 ..................................................................... ...... 43 8.3 新增时间区间 ..................................................................... ... 45 8.4 新增时间设定 ..................................................................... ... 46 8.5 格式模板管理 ..................................................................... ... 48 8.6 新增格式模板 ..................................................................... ... 49 8.7 修改数据项目 ..................................................................... ... 54 8.8 删除格式模板 ..................................................................... ... 57 8.9 新增报表格式 ..................................................................... ... 58 8.10 删除报表格式 ......................................................................61 8.11 激活报表格式 ......................................................................623 北京白矾科技有限公司.8.12 关闭报表格式 ......................................................................63 8.13 浏览数据 ..................................................................... ........ 64 9 历史报表管理（CCA—ETLAssistant） ........................................ 65 9.1 登录ETL Assistant ...............................................................65 9.2 浏览数据 ..................................................................... .......... 67 10 路由策略设计器(IRD) .................................................................68 10.1 登录IRD .................................................................... ......... 68 10.2 新建路由策略 ......................................................................68 10.3 修改已有路由策略 (69)10.4 加载路由策略 ......................................................................69 10.5 查看路由运行情况 (70)4 北京白矾科技有限公司.CTI(Computer Telephony Interface)服务器是一台与排队机CTI链路相连的设备，它使用户能够通过计算机来操作全部的电话功能，实现呼叫中心系统的计算机化管理。

Dec，2015⏹Founded in USA in 2005January2015merged with Orise Tech ☐January, 2015 merged with Orise Tech.☐A public company listed on TSE☐Operation in HsinChu(Taiwan)and ShenZhen(China)S(C)☐Technical/ Sales Service Centers：China(8)Taiwan(2), USA (1)Finland(1)()，(),()，()⏹TSE ticker ：3545CONFIDENTIALProduct Lines 产品线Type 类型Touch Controller ●Self-Capacitive 自电容●Mutual-Capacitive 互电容触摸控制芯片●Oncell●TFT：small-medium size smartLCD Driver 显示驱动芯片portable device中小尺寸便携式智能设备●STN：Fax machine, Calculator…传真机、计算器等Integrated Driver Controller●In-cell(IDC)单芯片解决方案Fingerprint Solution●Area type 按压式CONFIDENTIAL指纹识别方案• 全球首创IDC 单芯片触控显示方案(Super In-cell)成功量产被动式指纹方案产主动式指纹方案式进入市场2015• 被动式指纹方案量产，主动式指纹方案正式进入市场2014• 全球首创IDC 单芯片触控显示模组技术方案(Super In-cell), 支持a-Si 及• 中国首家实现On-cell 技术量产；•2013LTPS 面板技术• 拥有滑动式指纹量产方案，发展适合手机方案的主/被动式指纹产品• 中国首家实现支持OGS 结构的电容屏触控方案量产；•全球首家推出单层自容真实两点方案并拥有“自容分区两点”的专利技术； 全球率先合作开发出手势唤醒技术• 开始滑动式指纹识别方案开发2012全球首家推出单层自容真实两点方案并拥有自容分区两点的专利技术；• 继Apple 之后，全球首家推出真实In-cell 方案并成功导入量产；• 继Apple 之后，全球首家实现互电容屏触控方案量产；•2009CONFIDENTIAL•亚洲首家推出单芯片支持至5吋的电容屏触控方案；全球化销售/支持团队Salo 化销售支团队JapanSouth KoreaBeijing(北京分公司）San Jose (USA)(Finland)Xi’an(西安办公室）Nanchang （南昌办公室）Shanghai g （上海分公司）Taiwan(台湾分公司）Xiamen （厦门办公室）Shenzhen(深圳指纹总部）R&D / OperationSales/Technical Support Location2016 Q12016 Q22016 Q32015 Q4FT93Plan2015 Q3FT9306FT9346•支持长方形/跑道形（带Ring ）•支持哑光/高光Coating•3.8*12.2~7*16mm 自由切割CoatingFT93xx•支持方形/圆形（带Ring ）••支持长方形/跑道形（无环）•低成本哑光/高光Coating 方案•3.8*12.2~7*16mm 自由切割•支持方形/圆（带/不带金属环）FT9336•支持长方形/跑道形（无环）•支持哑光/高光Coating •外形自由切割•支持方形/圆形（无环）FT9308FT95xxFT9348支持哑光/高光Coating•7.5*6mm~12*12mm 自由切割•支持长方形/跑道形支持玻璃陶瓷蓝宝石盖板•低成本哑光/高光Coating 方案•7.5*6mm~12*12mm 自由切割FT9338•支持哑光/高光Coating •外形自由切割•支持长方形/跑道形FT9536CoverFT9546FT9548•支持玻璃、陶瓷、蓝宝石盖板•外形自由切割•支持方形/圆外形•支持玻璃、陶瓷、蓝宝石盖板FT9538•支持多种材质盖板•外形自由切割•低成本，多功能•支持方形、圆形、•支持多种材质盖板6x36FT9638FT96xx958•外形自由切割•支持Under Glass 300um支持多种材质板•外形自由切割•低成本，多功能UnderGlassFT9648•支持Under Glass 550umCONFIDENTIALFeatures FT9306FT9308 Image Qualityg Q y画面质量508DPI508DPI Type类型长方形，跑道形方形，圆形Power功耗Scan: 20mA,Standby: 500uA,Sleep: 70uA,Scan: 20mA,Standby: 500uA,Sleep: 70uA,LGA 尺寸(3.8-7.0)*(12.0—16.0)mm范围自由切割（7.6-12)mm范围自由切割Resolution Ratio分辨率64x16088x88 Verification Speed<300ms<300msESD 静电防护15KV/8KV15KV/8KV FRR<1%<1%FAR<0.001%<0.001% CONFIDENTIAL状态MP MP高通平台QSEEMTK平台三星平台第三方TEE厂商未来移动支付应用CONFIDENTIAL多平台移动支付调测经验和标准接口快速移植合作模式DriverChip深度务模组或终端客户IR深度服务模组厂或终端客户SE Coating/ Cover LensFlex Board Assembly Module Test 全流程的IC/系统/算法/软件设计和开发APP 测试工具BezelCONFIDENTIAL生产/供应链Supply Chain无论在晶圆制造，芯片封装还是在晶圆/芯片的测试上，FocalTech 都与世界第一流的工厂合作并保持良好关系，实对产质期产• 台积电(TSMC)是世界最大的晶圆代工厂，每年营业额实现对产品品质、交期、服务、产能及价格的有力保障晶圆制造Foundry达150亿美金，其市场占有率45％。

INTERNAL USE ONLYV2.0FT_TP_AssitantProject name FT_TP_AssistantDocument refVersion V2.2Release date 2015-05-29Owner HujianClassification INTERNAL USE ONLYDistribution List [DISTRIBUTION LIST]ApprovalTHIS DOCUMENT CONTAINS INFORMATION PROPRIETARY TO FOCALTECH SYSTEMS, LTD., AND MAY NOT BE REPRODUCED, DISCLOSED OR USED IN WHOLE OR PART WITHOUT THE EXPRESS WRITTEN PERMISSION OF FOCALTECH SYSTEMS, LTD.Copyright © 2015, FocalTech Systems, LtdAll rights reserved3/F,Kingdom Sci-Tech Building,5th South Gaoxin Avenue,Hi-Tech Industrial Park, Shenzhen, P.R. ChinaZIP :518057T +86 755 26588222F +86 755 26712499E support@Revision HistoryDate Version List of changes Author Approved by 2014-06-16 1.0.0 Initial draft Hujian2014-12-18 2.0.0 增加upgrader模块hujian2015-01-13 2.1.0 功能更新hujian2015-05-29 2.2.0 说明文档更新，增加了adb.rar hujian目录1概述 (1)2通讯节点和权限 (1)2.1查看读写权限 (1)2.2修改IIC读写权限 (1)2.3关于SELinux (2)3功能和设置 (2)3.1界面预览 (2)3.2功能模块简介 (4)3.2.1Data Test (4)3.2.2Touch Test (11)3.2.3TP Upgrader (13)3.3设置项说明 (14)3.3.1Interface Settings (14)3.3.2TP Settings (16)3.3.3Panel Setting (16)3.3.4VolumeKey Settings (16)3.3.5Ivalidate Settings (16)3.3.6Other Settings (16)4注意事项.......................................................................................................................................错误！未定义书签。

Advanced software for maximized efficiencyBypass the inconvenience of making fine adjustments to OCR settings with the Paper-Stream IP scanner driver, supporting both TWAIN and ISIS. The software automatically converts scanned images into exceptionally clean images, supporting OCR accuracy even when scanning documents with background patterns or wrinkled and soiled documents. Seamlessly linked to PaperStream IP, Paper-Stream Capture effectively and efficiently feeds information into your organization workflow with its various batch scanning capture features. Automatically utilizing data extracted from barcodes and patch codes, the software also determines your preferred saving destinations and eliminates time allocated to routine tasks.Boosted usability with a user-friendly and compact designThe scanner’s compact design is suitable for use anywhere: on desks, countertops, and inside small offices. Scan a wide variety ofpaper (27 to 413 g/m²), as well as plastic cards, utilizing its straight paper feeding path, with a single push of a button. Daily mainte-nance tasks, including interior cleaning and roller replacement, can also be done with ease for long-lasting utilization.High quality images in any conditionEnjoy sharp, high quality images with the fi-7140’s CCD image sensors. Subtle changes in scanning environment, such as in air temperature and LED illumination, are also nolonger a need for concern with the scanner automatically changing background colors to maintain consistently crisp images.The fi-7140 scans A4 portraits at 40 ppm/80 ipm (200/300 dpi), loads up to 80 sheets at a time, and ensures utmost efficiency with amazing scanning performance.Assistance for safe and reliable scanning The fi-7140 possesses diverse stable paper feeding mechanisms, ensuring speedy and high quality scanning without relying on PC performance. Minimize risk of document damage with Paper Protection function moni-toring paper feed distance. And bid farewell tomissing edges with the scanner’s Skew Reduc-er mechanism. Potential information loss, resulting from multiple sheets being fed through the scanner at once, is also no longeran issue with Ultrasonic Multi-feed detection. The essential fi Series scanner with exceptional business performanceDatasheetFUJITSU Image Scanner fi-7140ContactTrademarksABBYY™ FineReader™ Engine © ABBYY. OCR by ABBYY. ABBYY and FineReader are trademarks of ABBYY Software, Ltd. which may be registered in some jurisdictions. ISIS is a trademark of Open Text. Microsoft, Windows, and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. macOS is a trademark of Apple Inc., registered in the U.S. and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. Any other products or company names appearing in this document are the trademarks or registered trademarks of the respective companies. Safety PrecautionsBe sure to carefully read all safety precautions prior to using this product and use this device as instructed. Do not place this device in wet, moist, steamy, dusty or oily areas. Using this product under such conditions may result in electrical shock, fire or damage to this product. Be sure to limit the use of this product to listed power ratings.ENERGY STAR®PFU Limited, a Fujitsu company, has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a registered trademark of the United States.Specifications are subject to change without notice. V isit your local Fujitsu website for more information.*1 Actual scanning speeds are affected by data transmission and software processing times. *2 Indicated speeds are from using JPEG compression. *3 Indicated speeds are from using TIFF CCITT Group 4 compression. *4 Selectable maximum resolution may vary depending on the length of the scanned document. *5 Limitations may apply to the size of documents that can be scanned, depending on system environment, when scanning at high resolution (over 600 dpi). *6 Scans folded documents of up to 297 x 432 mm (11.7 x 17 in.) with carrier sheet scanning. *7 Capable of scanning documents longer than A4 (210 x 297 mm / 8.3 x 11.7 in.) sizes. When using PaperStream IP (TWAIN/ISIS) to scan at 200 dpi, the maximum scanning length is 5,588 mm (220 in.). *8 Thicknesses of up to 127 to 209 g/m² (34 to 56 lb) can be scanned for A8 (52 x 74 mm / 2.1 x 2.9 in.) sizes. *9 Capable of scanning up to 3 cards at a time (Note: does not set more than one embossed card at a time). *10 Maximum capacity depends on paper weight and may vary. *11 Capable of setting additional documents while scanning. *12 Numbers are calculated using scanning speeds and typical hours of scanner use, and are not meant to guarantee daily volume or unit durability. *13 Excludes the ADF paper chute and stacker. *14 Requires PaperStream IP 1.60.0 or earlier and PaperStream Capture 2.8.2 or earlier. *15 Functions equivalent to those offered by PaperStream IP may not be available with the Image Scanner Driver for macOS/Linux or WIA Driver. *16 Refer to the fi Series Support Site for driver/software downloads and full lineup of all supported operating system versions.4,000,000 printed characters or 6 months after opening the bagPrint Cartridge CA00050-0262Brake Roller PA03670-0001 Every 200,000 sheets or one year Pick RollerPA03670-0002Every 200,000 sheets or one yearConsumablesPA43404-A665 PaperStream Capture Pro optional licensePaperStream Capture Pro Scan Station (WG)PA43404-A433 Reads PDF417, QR code, Data Matrix,Aztec Code 2D Barcode for PaperStream PA03360-0013 Each package contains 5 carrier sheets Carrier SheetsPA03670-D201 Back-side printing on document Post Imprinter (FI-718PR) OptionsADF paper chute, AC cable, AC adapter, USB cable, Setup DVD-ROMIncluded ItemsMulti image output, Automatic color detection, Blank page detection, Dynamic threshold (iDTC), Advanced DTC, SDTC,Error diffusion, Dither, De-Screen, Emphasis, Dropout color (None/Red/Green/Blue/White/Saturation/Custom), sRGBoutput, Hole punch removal, Index tab cropping, Split image,De-Skew, Edge filler, Vertical streaks reduction, Cropping, Static thresholdImage Processing FunctionsPaperStream IP Diver (TWAIN/TWAIN x64/ISIS), WIA Driver *¹⁵,Image Scanner Driver for macOS (ICA)*¹⁵*¹⁶, Image Scanner Driver for Linux (SANE)*¹⁵*¹⁶, PaperStream Capture,PaperStream ClickScan *¹⁶, Software Operation Panel, Error Recovery Guide, ABBYY FineReader for ScanSnap™*¹⁶, Scanner Central AdminIncluded Software / DriversWindows® 11, Windows® 10, Windows® 8.1, Windows® 7, Windows Server® 2022, Windows Server® 2019, Windows Server® 2016, Windows Server® 2012 R2, Windows Server® 2012, Windows Server® 2008 R2, Windows Server® 2008*¹⁴, macOS, Linux (Ubuntu)Supported Operating System4.2 kg (9.3 lb)Weight300 x 170 x 163 mm (11.8 x 6.7 x 6.4 in.)Dimensions *¹³(Width x Depth x Height)ENERGY STAR®, RoHSEnvironmental Compliance 20 to 80% (non-condensing)Relative Humidity5 to 35 °C (41 to 95 °F)Temperature Operating Environment Less than 0.35 WAuto Standby (Off) Mode 1.8 W or less Sleep Mode36 W or less Operating Mode Power Consumption AC 100 to 240 V ±10 %Power Requirements USB 2.0 / USB 1.1InterfaceLag detection Paper Protection Overlap detection (Ultrasonic sensor), Length detection Multifeed Detection 6,000 sheetsExpected Daily Volume *¹²80 sheets (A4 80 g/m² or Letter 20 lb)ADF Capacity *¹⁰*¹¹27 to 413 g/m² (7.2 to 110 lb)*⁸ Plastic Card 1.4 mm (0.055 in.) or less *⁹ Paper Paper Weight (Thickness)5,588 mm (220 in.)Long Page Scanning *⁷ (Maximum)50.8 x 54 mm (2 x 2.1 in.) Minimum216 x 355.6 mm (8.5 x 14 in.)Maximum *⁶Document Size White / Black (selectable)Background Colors Color: 24-bit, Grayscale: 8-bit, Monochrome: 1-bit Output Format 50 to 600 dpi (adjustable by 1 dpi increments),1,200 dpi (driver)*⁵Output Resolution *⁴(Color / Grayscale / Monochrome)600 dpiOptical ResolutionWhite LED Array x 2 (front x 1, back x 1)Light Source Color CCD x 2 (front x 1, back x 1)Image Sensor Type Simplex: 40 ppm (200/300 dpi)Duplex: 80 ipm (200/300 dpi)Scanning Speed *¹ (A4 Portrait)(Color *²/Grayscale *²/Monochrome *³)ADF (Automatic Document Feeder), DuplexScanner TypeTechnical InformationIndonesiaPT Fujitsu Indonesia Tel: +62 21 570 9330*************************/id/scannersMalaysiaFujitsu (Malaysia) Sdn Bhd Tel: +603 8230 4188askfujitsu .my @/my/scannersPhilippinesFujitsu Philippines, Inc. Tel: +63 2 841 8488 ***************.com/ph/scannersSingaporeFujitsu Asia Pte Ltd Tel: +65 6512 7555 *******************/sg/scannersThailandFujitsu (Thailand) Co., Ltd. Tel: +66 2 302 1500 info .th @/th/en/scannersVietnamFujitsu Vietnam Limited Tel: + 84 4 2220 3113 sales -vn @/vn/en/scanners。