下载文档原格式
All editorial correspondence should be sent to: E-mail: *****************.Thejournalrequiresthatauthorssubmit electronicallyto:E-mail:*****************.All manuscripts must be single-spaced and have gener-ous margins. Begin each section at the top of a new page. Number all pages in sequence beginning with the title page. Arrange the article in the following order:Title page. This should contain the complete title of the manuscript: the names and affiliations of all authors, specific to the department level; the institution at which the work was performed; the name, address, telephone number, fax number, and e-mail address for all correspondence. If a manuscript was worked on by a group, one or more authors may be named from the group. The other members of the group are not considered authors, but may be listed in the acknowledgment section. Grant(s) or contract(s) acknowl-edgment, including name of the grant(s) or contract(s) sponsor and the contract grant number, must be supplied, if applicable, as the last item of the title page. Other acknowl-edgments must be supplied at the end of the manuscript.Disclosure statement. All authors must disclose any affiliations that they consider to be relevant and important with any organization that to any author’s knowledge has a direct interest, particularly a financial interest, in the subject matter or materials discussed. Such affiliations include, but are not limited to, employment by an industrial concern, ownership of stock, membership on a standing advisory council or committee, a seat on the board of directors, or being publicly associated with a company or its products. Abstract. This should be a factual condensation of the entire work structured into one paragraph. The abstract should be < 250 words.Key words. Following the abstract, supply a list of five to seven key words or key phrases, to supplement those al-ready appearing in the tile of the paper, to be used for index-ing purposes. Use terms from the medical subject headings of index medicus. If suitable MeSH terms are not avail-able for recently introduced terms, use terms com¬monly known.Text. The text should follow the format: Introduction, Materials and Methods, Results, Discussion, and Con-clusion (if needed). Use subheadings and paragraph titles whenever possible. Place Acknowledgments as the last el-ement of the text, before the references. Text length should be within 25 single-spaced pages. Length limits include title page, abstract, body, references, and figure legends. Authors whose first language is not English should arrange for their manuscripts to be written in idiomatic English prior to sub-mission. If photographs of human subjects are used, a copy of the signed consent form must accompany the manuscript. Letters of permission must be submitted with any material that has previously been published.Guide for AuthorsReferences. All references should be numbered consec-utively in order of appearance in the text and should be as complete as possible. The final list should be numbered in order of citation in text and include full article title, names of all authors (do not use name et al.), and inclusive page numbers. Abbreviate journal manes accor¬ding to index Medicus style. Note the following examples. Journal article: King VM, Armstrong DM, Apps R, Trott JR. Numerical aspects of pontine, lateral reticular, and inferior olivary pro-jections to two paravermal cortical zones of the cat cerebel-lum. J Comp Neurol 1998;390(4): 537-51. Books: Shi HP , Li W, Wang KH, eds. The practice guidelines for the scored Patient-Generated Subjective Global Assessment (PG-SGA) as a nutrition assessment tool in patients with cancer. 1 st ed. Beijing: People’s Medical Publishing House Co., LTD, 2013. More information about the reference style can be found at .Legends. A descriptive legend must accompany each illustration and must define all abbreviations used therein.Tables. Each table must have a title. Tables should be numbered in order of appearance with Roman numerals and be referred to by number in logical order in the text.Illustrations. They should be numbered in one consec-utive series using Arabic numerals and be cited in order in the text. Four-color illustrations will be considered for pub-lication. Illustrations will be in color in the online version of the article at no cost to the author.File requirementsText. Must be submitted in Word (DOC or RTF). Do not embed tables or figures. Please include the title page, syn -opsis, abstract, main body, references, acknowledge-ments, and figure legends in a single file. Length should be within 25 single-spaced pages.Tables. Must be created using the Table tool in Word (DOC or RTF). Each table must be in a separate file, and the files should be named by Table # (i.e., Table 1, Table 2, etc.).Electronic artwork. In general, each file must contain a single figure and be named by Figure # (i.e., Figure 1, Figure 2, etc.). All figures Submission should be original. It implies that the image or parts thereof have not been published elsewhere. Figures must be in TIFF or JPG. TIFF (or JPEG): Bitmapped (pure black & white pixels) line drawings and monochrome keep to a minimum of 1000 dpi. TIFF (or JPEG): Combinations bitmapped line/half-tone (color or grayscale) keep to a minimum of 300 dpi.Figure captions. All figures have a caption (with source information, when required). The captions have been in-cluded at the end of the text files. Please provide captions and illustrations separately. Please contains detailed expla-nation of all symbols and abbreviations.All manuscripts submitted to JNO must be submittedsolely to this journal, may not have been published in anoth-er publication of any type, professional or lay, and become the property of the publisher. No published material may be reproduced or published elsewhere without the written per-mission of the publisher and the author. The authors need to declare the above in the cover letter for the submission.。
中考复习指南英语默写手册及答案全文共3篇示例，供读者参考篇1Middle School Entrance Examination Review Guide: English Dictation Manual and AnswersI. IntroductionThe middle school entrance examination is a critical milestone in a student's academic journey. To help students prepare for this important exam, we have prepared a comprehensive English dictation manual and answers. This manual covers a wide range of topics commonly tested in the entrance exam, including vocabulary, grammar, and sentence structure. By using this manual, students can improve their dictation skills and increase their chances of success in the exam.II. How to Use the Manual1. Vocabulary List: The manual contains a list of commonly used English words and their corresponding definitions. Students should review these words regularly and practice writing them down to improve their dictation skills.2. Grammar Rules: The manual also includes a section on English grammar rules, such as verb tenses, prepositions, and conjunctions. Students should study these rules carefully and apply them in their dictation exercises.3. Sentence Structure: The manual provides sample sentences for students to practice dictating. By listening to these sentences and writing them down, students can improve their sentence structure and punctuation skills.4. Dictation Exercises: The manual features a variety of dictation exercises for students to complete. These exercises range from simple sentences to complex paragraphs, allowing students to test their dictation skills at different levels.III. Benefits of Using the Manual1. Improved Dictation Skills: By practicing dictation regularly using the manual, students can improve their listening and writing skills in English.2. Enhanced Vocabulary: The vocabulary list in the manual helps students expand their English vocabulary and become more familiar with commonly used words.3. Better Grammar and Sentence Structure: The grammar rules and sample sentences in the manual help studentsunderstand and apply English grammar principles in their dictation exercises.4. Increased Confidence: By mastering dictation through regular practice with the manual, students can boost their confidence and perform better in the middle school entrance examination.IV. ConclusionIn conclusion, the English dictation manual and answers are valuable resources for students preparing for the middle school entrance examination. By using this manual, students can enhance their dictation skills, improve their English language proficiency, and increase their chances of success in the exam. We encourage all students to make the most of this manual and strive for excellence in the upcoming entrance exam. Good luck!篇2Middle School Entrance Examination Revision Guide: English Dictation Manual and AnswersIntroductionThe middle school entrance examination is a crucial milestone for students in China. English, as a core subject in theexam, plays a vital role in determining students' overall performance. To help students prepare for the dictation section of the exam, we have compiled this revision guide with a comprehensive list of words and phrases commonly tested in the dictation section.Section 1: Word Lists1. Animals- Cat- Dog- Elephant- Giraffe- Lion- Tiger- Zebra2. Colors- Red- Blue- Yellow- Green- Orange- Purple- PinkSection 2: Phrases and Sentences1. Hello, how are you?2. What is your name?3. I like to eat pizza.4. Can you help me?5. Good morning, teacher.Section 3: Practice Dictation ExercisePlease listen carefully and write the following words and sentences:1. Dog2. Blue3. I like to eat pizza.4. Good morning, teacher.5. Can you help me?Answers:1. Dog2. Blue3. I like to eat pizza.4. Good morning, teacher.5. Can you help me?ConclusionBy practicing with this English dictation manual, students can enhance their listening and writing skills, which are essential for success in the middle school entrance examination. Remember, regular practice and revision are key to achieving good results in the exam. Good luck!篇3Middle School Entrance Examination Review GuideOverview:As the middle school entrance examination approaches, students may feel overwhelmed by the amount of material theyneed to review. One effective way to prepare for the exam is through regular practice of English dictation. This guide provides students with a comprehensive overview of English dictation and includes a range of exercises for students to practice. In addition, the guide also contains answer keys so that students can check their answers and identify areas where they need to improve.Section 1: Introduction to English DictationEnglish dictation is a common exercise used to improve students' writing, spelling, and vocabulary skills. During a dictation exercise, students listen to a passage read aloud by the teacher and write down what they hear. This exercise helps students improve their listening skills and ensures that they are able to accurately transcribe spoken English into written English.Section 2: How to Use This GuideThis guide is divided into different sections, with each section focusing on a different aspect of English dictation. Students should start by reviewing the overview of English dictation and then move on to the exercises in each section. After completing each exercise, students can check their answers against the answer keys provided at the end of the guide.Section 3: ExercisesThe exercises in this guide cover a range of topics, including grammar, vocabulary, and sentence structure. Students can use these exercises to practice their dictation skills and identify areas where they need to improve. The exercises are designed to be challenging, so students should take their time and focus on writing accurately.Section 4: Answer KeysThe answer keys at the end of the guide provide students with the correct answers to each exercise. By checking their answers against the answer keys, students can identify areas where they made mistakes and work on improving those areas. The answer keys also provide explanations for why each answer is correct, helping students understand the rules of English grammar and spelling.Conclusion:English dictation is an important skill for students to master, especially as they prepare for the middle school entrance examination. This guide provides students with a comprehensive overview of English dictation and includes a range of exercises to help students practice. By regularly practicing English dictation and checking their answers against the answer keys provided,students can improve their listening, writing, and spelling skills and increase their chances of success on the exam.。
冰箱英语说明书Title:Refrigerator User ManualIntroduction:Welcome to the world of modern convenience with your new refrigerator.This user manual is designed to guide you through the setup,operation,and maintenance of your refrigerator to ensure you get the most out of your appliance.Table of Contents:1.Safety Precautions2.Unpacking and Placement3.Controls and Settings4.Energy Saving Tips5.Troubleshooting6.Maintenance7.Warranty Information1.Safety Precautions:Always ensure the refrigerator is placed on a level surface.Keep the refrigerator away from heat sources and direct sunlight.Do not place flammable materials near the refrigerator.Ensure the refrigerator is properly grounded.2.Unpacking and Placement:Carefully remove all packaging materials.Check for any visible damage before plugging in the refrigerator.Position the refrigerator in a wellventilated area,avoiding corners where cold air circulation may be restricted.3.Controls and Settings:The temperature control knob allows you to adjust the internal temperature.The defrost timer can be set to automatically defrost the refrigerator.The door alarm will sound if the door is left open for an extended period.4.Energy Saving Tips:Avoid opening the refrigerator door frequently.Keep the refrigerator full to maintain a constant temperature.Regularly clean the condenser coils to improve efficiency.5.Troubleshooting:If the refrigerator is not cooling,check the door seal.If there is excessive noise,it may be due to the refrigerator settling on an uneven surface. For any other issues,refer to the troubleshooting guide provided.6.Maintenance:Clean the refrigerator regularly to prevent the buildup of frost and bacteria.Defrost the refrigerator manually or set the automatic defrost timer.Lubricate the door hinges with a small amount of oil if they become stiff.7.Warranty Information:Your refrigerator comes with a manufacturers warranty valid for one year from the date of purchase.For warranty claims,contact the customer service department with your purchase details. Conclusion:Your refrigerator is an essential part of your home,and with proper care and maintenance, it will serve you well for many years.Should you have any questions or require further assistance,do not hesitate to contact our customer support.标题：冰箱使用说明书引言：欢迎来到现代便利的世界，拥有您的新冰箱。
All information in this Owner’s Manual is current at the time of publication. However, HYUNDAI reserves the right to make changes at any time so that our policy of continual product improvement may be carried out.This manual applies to all models of this vehicle and includes descriptions and explanations of optional as well as standard equipment.As a result, you may find material in this manual that does not apply to your specific vehicle.* Trademarks and tradenames owned or licensed in Canada byHYUNDAI Auto Canada Corp. which carries on business as“HYUNDAI Auto Canada”.OWNER’S MANUALOperation Maintenance SpecificationsIntroductionF2F31Electric vehicle ...................................................................................................1-7Electric Vehicle ..............................................................................................................1-7Characteristics of Electric Vehicles ..............................................................................1-7Battery Information .......................................................................................................1-7Main components of electric vehicle ...............................................................1-8Main Components of Electric Vehicle ........................................................................1-8High Voltage Battery (lithium-ion battery) .................................................................1-8High Voltage Battery Warmer System ........................................................................1-9EV mode ...........................................................................................................1-10EV Mode Screen ..........................................................................................................1-10Energy Information ......................................................................................................1-11Next Departure .............................................................................................................1-11Charging and Climate ................................................................................................1-12Vehicle to Load (V2L) ..................................................................................................1-14Nearby Stations ..........................................................................................................1-19EV Settings ..................................................................................................................1-20Charge types for electric vehicle ....................................................................1-23Charging Information ..................................................................................................1-23Charging Time Information ........................................................................................1-23Charging Types ............................................................................................................1-24Charge indicator lamp for electric vehicle .....................................................1-25Charging Status ...........................................................................................................1-25Charging connector lock .................................................................................1-26Locking Charging Cable.............................................................................................1-26Scheduled charging .........................................................................................1-27Scheduled Charging....................................................................................................1-27Charging electric vehicle .................................................................................1-28Electric Charging Door ..............................................................................................1-28Charging Precautions ................................................................................................1-29How to Check the Symbol on the Charging Label ..................................................1-30Unlock Charging Door in Emergency ........................................................................1-31AC Charge ....................................................................................................................1-31DC Charge...................................................................................................................1-34Portable Charge .........................................................................................................1-36Charging the electric vehicle (abrupt stop) ...................................................1-49Action to be taken when charging stops abruptly ...................................................1-491. Foreword / Starting your Electric vehicle1Driving electric vehicle ....................................................................................1-50 How to Start the Vehicle ............................................................................................1-50 How to Stop the Vehicle ............................................................................................1-50 Virtual Engine Sound System .....................................................................................1-51 Distance to Empty .......................................................................................................1-51 Tips for Improving Distance to Empty ......................................................................1-52 ECO Driving ................................................................................................................1-53 Electricity Use .............................................................................................................1-53 Power/Charge Gauge ................................................................................................1-54 State Of Charge (SOC) Gauge for High Voltage Battery ..........................................1-54 Aux. Battery Saver+ ....................................................................................................1-55 Warning and Indicator Lights (related to electric vehicle) ......................................1-56 LCD Display Messages ...............................................................................................1-58 Safety precautions for electric vehicle ...........................................................1-64 If an Accident Occurs .................................................................................................1-64 Other Precautions for Electric Vehicle ......................................................................1-65 High Voltage cut-off Switch ......................................................................................1-66。
一、參數設定 (3)二、MANUAL GUIDE主畫面說明 (3)1、模式選擇開關切換到EDIT(編輯) (3)2、按下MANUL UGIDE按鍵出現如圖所示畫面 (3)3、功能鍵說明 (4)三、功能鍵功能說明- WRK-CO(工作座標)模式 (4)1、功能鍵說明 (5)2、OFFSET-刀具補償標準 (5)四、[ SETTNG ] (6)1、功能鍵說明 (6)五、LIST-程式目錄 (7)1、功能鍵說明 (7)六、編輯選單說明 (8)1、編輯選單的說明如下 (8)1、功能鍵說明 (9)七、MSF CODE-M、S、F碼軟鍵 (10)2、功能鍵說明 (10)八、EDIT-編輯程式 (11)1、模式選擇開關切換到EDIT(編輯) (11)2、按下MANUL UGIDE按鍵出現如圖所示畫面 (11)3、設定「OFFSET(刀具補正)」 (11)九、編輯程式「LIST」 (12)1、按下「LIST」出現如圖 (12)2、輸入程式號碼例-1 (12)3、按下「POSTIN」，逐一按下選擇「G91」模式，出現如圖 (13)4、按下「G91」模式，出現如圖 (13)6、設定「平面加工」指令 (18)7、設定「TOOL(刀具定義)」 (19)8、設定鑽孔加工 (25)9、設定「MSF(MSF值)」 (26)10、設定袋狀輪廓加工 (31)11、設定「MSF(MSF值)」 (32)一、參數設定OPTION參數:P9984#7=1PMC訊號:G62.4=1示波器功能需OFF(會影響MANUAL GUIDE的圖形顯示) 其他參數:P6500#5=1P6515=10P9100=8000P9125=224P9126=234P9127=235P9140=20P9141=20P9150=800二、M ANUAL GUIDE主畫面說明1、模式選擇開關切換到EDIT(編輯)2、按下MANUL UGIDE按鍵出現如圖所示畫面3、功能鍵說明●EDIT(編輯 ): 製造或者編輯一個程式。
“manual”在英语中有多重含义，包括但不限于“手册”和“体力的”，因此，例句也会有所不同。
以下是关于“manual”的一些例句：1.看完了说明书，他拿起了灭火器。
Having seen the manual, he picked up the extinguisher.2.这本小册子里有很多实用的小建议。
This manual is full of useful tips.3.他吃不了苦，胜任不了艰苦的体力劳动。
He's as tender as a chicken and not up to hard manual work.4.维修手册向您提供修理汽车所需的图表和说明。
A maintenance manual gives diagrams and instructions for repairing your car.5.对于体力劳动者来说，在周末的下午给他们提供踢足球或打棒球的机会是无益的。
It is no use offering the manual labourer the chance of playing a game of football or baseball on Saturday afternoon.6.白领工人不像劳动工人那样有良好的组织，那样良好的联合，这是众所周知的事。
It is a well-known fact that white-collar workers are not nearly so well organized or unionized as the manual workers.7.体力劳动使人疲累。
Manual work is tiring.8.女工为赚取工资而从事体力或工业劳动的女人。
A woman who performs manual or industrial labor for wages.9.工作已经完成，不需要再手动检查了。
OperatiOn, care and maintenance manual For windows & doors1. WarningS fOr incOrrect uSe (4)1.1. Product information (5)1.2. Incorrect use of sashes (5)1.3. Incorrect use of handles (6)1.4. Incorrect use of locks (7)2. OperatiOn Of WindOWS (8)2.1. Opening types (9)2.1.1. Turn & tilt window (9)2.1.2. Tilt before turn window (10)2.1.3. Side hung window opening inward (11)2.1.4. Double casement window (12)2.1.5. Bottom hung window opening inward (13)2.1.6. Side hung window opening outward (14)2.1.7. Top hung window opening outward (14)2.1.8. Top hung outward projecting window (15)2.1.9. Vertical pivoting window (15)2.1.10. Horizontal pivoting window (16)2.1.11. Sliding window (17)2.1.12. Folding window (18)2.1.13. Roof window (19)2.1.14. Ventalis (19)2.2. Accessories for windows (20)2.2.1. Window handles (20)2.2.2. Opening limiter (21)2.2.3. Ventilation slid (22)2.2.4. Balcony door snapper (22)2.2.5. Built on lock (23)3. OperatiOn Of dOOrS (24)3.1. Opening types (25)3.1.1. Single doors (25)3.1.2. Double doors (26)3.1.3. Pivoting doors (27)3.1.4. Sliding doors (27)3.2.5 Restrictor lock (34)3.2.6. Door stop (35)4. care and maintenance (36)4.1. General instructions for cleaning and maintenance (37)4.2. Maintenance interval (38)4.3. Overall maintenance (38)4.3.1. Maintenance of Drainage slots (38)4.3.2. Maintenance of rails in sliding and lift- and slide elements (39)4.3.3. Maintenance of gaskets (39)4.3.4. Maintenance of hardware and accessories (39)4.4. Cleaning and maintenance of windows (40)4.4.1. Turn & tilt, turn and tilt & turn (40)4.4.2. Windows with friction stay (41)4.5. Cleaning and maintenance of doors (42)4.5.1. Single & double doors (42)4.5.2. Sliding door (44)4.6. Cleaning and maintenance of other systems (46)4.6.1. Ventalis (46)4.6.2. GP 51 (46)4.7. Care products (47)5. impOrtance Of climate cOntrOl and VentilatiOn (48)5.1 Air tightness combined with good ventilation (49)5.2 Ventilation and climate control (49)6. recOmmendatiOnS (50)31. WarningS fOr incOrrect uSe5Risk of injury by getting stuck between window or door sash and frame.Danger of falling through if sashes are open.Danger of falling objects and/or related injury, e.g. caused by drafts.Risk of injury caused by sash impact.Risk of injury caused by sash impactwhen sashes are left open.61.3. incOrrect uSe Of HandleSSashes or leaves banging open in an uncontrolledmanner (e.g. caused by wind) against wallrecesses can damage the frame, fittings or therecess. Recommendation: use an opening limiter(regulates the opening distance) or a door stop.Obstacles (e.g. cables, flower pots) in the opening area between sash and frame can cause deformation and damage to frames and fittings.Operate the element handlesonly in the direction of thearrow as indicated in themanual and only up to therotation stop. The handleand operating mechanismcan be damaged otherwise.Load on the handle can cause damage to the locking mechanism.Never drill the fitting when the lock has been installed.Do not force the lock in case of tightness or sluggish operation. Instead, the cause of the problem should be assessed and fixed by a professional.Do not close the door when the bolt is pre-locked: this will damage the lock and the door frame.In case of a mechanical drive system, please observe the operating and maintenance instructions provided by the drive manufacturers.72. OperatiOn Of WindOWS 89t u r n p o s i t i o n10c l o s e d p o s i t i o n t i l t p o s i t i o nt u r n p o s i t i o nIn order to open the inactive (or casement) sash, the active sash needs be opened inwardscompletely. The inactive sash is equipped with locking bolts or a central locking mechanism. By unlocking these bolts or central locking mechanism, the inactive sash can be opened in side-hung position. To close the window, simply reverse the order .12121212ORORc l o se d p o s i t i o n t i l t p os i t i o nc l o s edp o s i t i o n t u r np o s i t i on2.1.5. bOttOm Hung WindOW Opening inWardVertical / HOrizOntal HandlefanligHt acceSSOireSThis element is equipped with either a handle, lever , spring latch or an automated opening mechanism. By operating the handle or spring latch, the window sash will move to a tilt position.As a basic principle, bottom hung sashes are secured in the tilt position, to avoid uncontrolled slamming open, by means of stay-arms (tilt safety cleaning stay-arms). These stays can bedetached for maintenance of the windows.OR OR OR ORc l os e d p o s i t i o n t i l t p os i t i o nc l os e d p o s i t i o n2.1.7. tOp Hung WindOW Opening OutWardBy operating the handle or button, the window sash can be opened towards the outside. The opened sash must be arrested with an opening limiter . A handle position with the handle pointing downwards is not possible.c l os e d p o s i t i o n t i l t p os i t i o nOROR2.1.9. Vertical piVOting WindOWnot possible.o p e n p o s i t i ontil t befOre turnTurn the window handle by 90° to achieve a tilt position. By turning the handle 180°, a turn position is obtained. If the handle is equipped with a cylinder lock, make sure this is unlocked as indicated on the drawing before operating the handle.2.2.2. Opening limiterAn opening limiter can be used to determine the opening distance of an outward opening window up to 90°. These do not require any maintenance or lubrication. It is possible to unlock the opening limiter to open the window for cleaning or maintenance purposes.2.2.4. balcOnY dOOr SnapperA balcony door snapper makes it possibleto keep a balcony door closed without theneed to operate any locking mechanism.It is activated by simply closing the doorbehind you when entering the balcony. Tounlock it, simply push the fixed handle onthe outside and the door is opened again.Operate the lock on the inside to activate the secure locking mechanism, keeping unwanted visitors from entering your home.1 2pushed downwards by 45°. This places the window in a fixed ventilation position with a slight opening gap of +/- 5mm.The built on lock serves as a locking of the turning position in turn and turn-tilt windows. With turn-tilt sashes, the tilt position can also be activated when the built on lock is activated.unlOcKed pOSitiOnt i l t p os i t i o nt u r n p o s i t i o n lOcKed pOSitiOn3. OperatiOn Of dOOrS3.1. Opening tYpeS3.1.1. Single dOOrSTo open a single door, push the handle downwards while pulling (inward opening) or pushing (outward opening) the door. To close the door, leave the handle in its original horizontal position and simply push or pull until the door is closed.o p e n p o s i t i onc l o s ed p o s i t i onIn order to open the second door , open the first door as indicated in the previous chapters. Subsequently, the locking bolts need to be unlocked before opening the second door . To close the doors, simply reverse the order .1212o p e np o s i t i o nop e n p o s i t i o n c l o s e dp o s i t io n3.1.4. Sliding dOOrSThere are 3 types of opening mechanisms:1. Handle operated : in order to open thesliding element, turn the handle to a horizontal position (quarter turn) and slide the window open. T o close the element, simply reverse the order .2. Sliding elements with a fixed handle arelocked and unlocked by turning the cylinder .3. integrated handle : the sliding door is unlocked by sliding up the mechanism inside the handle. Y ou will have a visual feedback of a green sticker when the door is unlocked. T o lock the door , simply reverse the order and a red sticker will be visible.op e n p o s i t i o n c lo s e d p o s i t i o n OROROROR1 2o p e n po s i t i o na horizontal ‘open’ position first.The first sash must be positioned 90° to the rail and consequently, you can open the complete door by pulling (inward opening) or pushing (outward opening) the secondary handles. To close the folding door, push the secondary handle (inward opening) or pull the secondary handle together with the auxiliary handle on the hinge (outward opening) until the sashes are positioned on top of the rail. Close the door by putting the handle inl o o s e n e d p o si t i o nt i l t p os i t i o no p e np o s i t i oncYlinder Operated lOcK secure the doorand push the handle to open the door.3.2.2. lOcKing and unlOcKingOf dOuble dOOrSFirst of all, the active door needs to be opened. Ways to open this first door are explained in previous chapters. In order to open the inactive door sash, the locking bolts on top and at the bottom of the door need to be manipulated as indicated on the drawing.The active sash is operated like aregular door . To open the inactive sash, the auxilliary handle should be turned by 180° from a downward to an upwardpointing position.cl o s e d p o s i t i o n ESCAPE DOORNOTE! For detailed guidelines on specific opening possibilities and operations, we refer to the specific system catalogues of Reynaers Aluminium. If this is not available to you, a local Reynaers partner should be contacted.3.2.5. reStrictOr lOcKThe opening distance of a door can be limited for safety reasons by means of a restrictor lock. Operate the rotary knob to activate the locking mechanism and to allow for maximum 15cm of door opening. This safety measure will keep unauthorized persons from opening the door.To open the door completely and todoor can now be opened normally.4. care and maintenancechecked. In case screws are loose or damaged, they should be fixed or replaced.thE bElOw MAtERIAlS CAN NOt bE uSED tO ClEAN yOuR wINDOwS AND DOORS:• Hard materials such as knives, steel wool, metal scrapers, sandpaper, etc. these will damage the surface of your window -and door elements.• Aggressive or corrosive cleaning agents should be avoided as they can inflict irreversible damage to the surface treatment of your window -and door elements. Instead, use our dedicated range of Reynaers Care products. An overview of our care products can be found on page 47.Frequency of maintenance for profiles and hardware in non-corrosive atmospheres and provided that the aluminium constructions are exposed to rain: twice a year. In all other cases: 4 times a year.Corrosive atmospheres or other risk factors (e.g. limited rain) require more frequent cleaning and observation by the end-user. Examples of corrosive atmospheres:- near the coast (<10km) or close to estuaria or large rivers (<5km);- above water (condensation);- within industrial areas, in particular areas with heavy emission of chemicals, fluorides, gasses, and ore materials;- exposure to large traffic (motorways, railways, airports);- very agressive atmospheres (e.g. swimming pools, water treatment industry, laboratories, pollution by animals etc.)NOTE! Special maintenance is required in case of fireproof doors. For detailed guidelines, we refer to the specific system catalogues of Reynaers Aluminium. If this is not available to you, a local Reynaers partner should be contacted.4.3. OVerall maintenance4.3.1. maintenance Ofdrainage SlOtSClean the chamber between the movingand the fixed part every 6 months. Ifnecessary, clear the drainage slots ofany blockings.Remove the dust and grease and graphite annually* from the following areas. Clean hardware exclusively with a soft cloth and mild, pH-neutral cleaning materials in diluted form.• Window gearing• Friction hinges• Moving parts of the handles• Locks and cylinders, using a graphite pipette and graphite powder• The opening restrictor of the sliding element* The frequency depends on opening type and environment, please check specifications in chapter 4.2WARNING!• avoid silicon lubricants, rather use a dry cloth and fitting oil in the REYNACLEAN box (086.9220) to protect the surface and prevent dust collection on the hardware parts.• do not lubricate the composite rods or door hinges.• Never use aggressive acidiferous cleaning materials or scouring agents. These can cause damage to the hardware.4.4. cleaning and maintenance Of WindOWS4.4.1. turn & til t, turn and til t & turnThe following maintenance operations must be carried out on a regular basis:1. Clean the mechanism and remove any traces of dirt. Use a soft cloth and mild, pH-neutralcleaning materials in diluted form.2. Check all the components that are important for safety (hinges, extension arms). Inparticular, the hinges should be checked for damage and/or deformation due to violent impact.3. Lubricate the moving parts and closure points as indicated in the diagram (use neutrallubricants). If necessary carry out adjustments to the mechanism and replace worn-out components to restore the correct functioning of the sash. This operation must be carried out by qualified service personnel.If necessary carry out any adjustments of the mechanism and replace worn-out componentsto restore the correctfunctioning of the sash.This operation must becarried out by qualifiedservice personnel.4.4.2. WindOWS WitH frictiOn StaYStep 1: clean all dirt, dust and debris from all parts of the product and keep any obstructions away from the pivoting and sliding parts.1. Use a vacuum cleaner or a small soft brush to remove dry materials.2. Use a dry cloth to remove any remains of dirt.Step 2: check that all fixing screws are present and are securely and fully tightened.Step 3: verify that other hardware fitted to the window assembly, e.g. hinges, locking mechanism(s), handles, motors, etc, are operating correctly.Step 4: lubricate all pivoting and sliding parts of the products using high quality light, machine oil, such as provided in the Reynacare box.1. One drop per pivot or sliding part is sufficient.2. Do not use a WD40-type or silicone-based maintenance spray for lubricationpurposes.Step 5: wipe any excess lubricating oil over the surfaces of the hinge mechanism links using a soft lint free cloth.Step 6: check the correct and smooth operation of the sash.4.5. cleaning and maintenance Of dOOrS4.5.1. Single & dOuble dOOrSdOOr lOcKSSafety-relevant hardware should bechecked at least annually* for wear andtear and a continuous firm fit. Dependingon the requirements, fixing screws haveto be tightened. The damaged or wornparts should be exchanged by originalparts by an authorized specialist.All movable parts and locking partshave to be oiled and their working ordershould be checked. The cylinder can bemaintained by using graphite powder.* The frequency depends on openingtype and environment, please checkspecifications in chapter 4.2dOOr HingeSIn general, hinges are maintenance free anddon’t need to be greased.• In the case of door closers with special functions(hold-open devices/ hold-open systems), the legal check, monitoring, and maintenance must be observed• Door closers and / or defective parts must be replaced immediately if their proper function is no longer guaranteed.Only cleaning agents without corrosive and damaging components should be used.REYNACARE box.To ensure the smooth and trouble free operation, you must carry out the following maintenance instructions at least once a year:• Lubricate or oil all locking parts.• Use only clean and non-resinous grease or oil.• After cleaning the hardware surface, treat it with silicone and corrosion free (i.e. non-acidic)oil, as provided in the REYNACARE box.WARNING!The following work should only be performed by an authorized specialist:• The replacement of fittings• The assembly/dismantling of sashesbe carried out once a year: Clean the inner rail on top of the GP 51 system with a cloth and spray the inner side of therail with Teflon spray4.7. care prOductSTo ensure a lifelong and optimal functioning of your window -and door elements, Reynaers provides a complete range of care products for aluminium profiles. Here is an overview of our care product range with a brief product description. Remember to carefully read the instructions on the product labels.reYnOVatOr 718• All-in-one total renovation oil used for restoration, conservation andmaintenance of already installed aluminium surfaces(powder-coated and anodized)• Protection against corrosion• Adds shine• Originates treating protective filmArt. Nr: 086 9211 / 500 ml / Sold per onereYnaWaSH cOlOr• Colour cleaner for periodical application and maintenance.• For all surfaces, including texture coating, powder-coated and film-laminated frames, as well as the glass surfaces• Accurate and easy dosage• Solvent-free• Ph-neutralArt. Nr: 086 9212 / 500 ml / Sold per onereYnaWaSH anO• Adds new shine to older profiles• Cream cleaner for periodical application• For all anodized aluminium surfaces• Solvent-freeArt. Nr: 086 9213 / 500 ml / Sold per onereYnacare bOXCombination of all necessary maintenance productsThis box includes:• Reynawash color: 200 ml• Fitting oil: guarantees the smooth-running ofthe mobile parts & protects against corrosion• Maintenance stick: prevents gaskets from clinging• Cleaning cloth• Small, handy unitsArt. Nr: 086 9220 / Sold per one5. impOrtance Of climate cOntrOl and VentilatiOnin a further evolved stage, cause stains, fungus and decaying of the plaster wall. To avoid the negative effects of the moist, rooms should be well ventilated.This can be achieved as follows:1. Opening the window completely for a few minutes every day2. Put it in a tilt position for a longer time3. Install a Ventalis (intelligent ventilation grid) on top of the window/sliding system forcontinuous controlled ventilation.5.2 VentilatiOn and climate cOntrOl1. To avoid loss of heating energy long-term uncontrolled draught should be avoided.Putting the window on a tilt position during winter time is therefore not recommended. 2. Short term maximal ventilation of the room, by opening the window completely, has lesseffect on the heat loss and is preferred above long term, uncontrolled ventilation.3. Controlled ventilation with Ventalis defines a maximal airflow trough the grid and closesoff automatically with high wind pressures to avoid drought. Positioned in the dry areas of the home (bedroom, living room), fresh air flows in. Typically the bathroom and kitchen have extractors that pull the fresh air trough the house and push the moist air outside.This Ventalis solution provides fresh air all day/night long, limits the heat loss whileoffering a secure solution (anti burglary).6. recOmmendatiOnS。
STRING REPLACEMENTStrings will deteriorate over time, causing buzzing or inaccurate pitch. Replace the strings whenever your strings begin to rust or become discolored. We recommend that you replace all of the strings as a set at the same time. Bent, twisted, or damaged strings will not produce the appropriate quality sound and therefore should not be used.Wind the string around the tuning machine post two or threetimes, making sure to wind from top to bottom. Wind about 5–7cm of string for guitar and 8–10 cm for bass. Do not wind thestring on top of itself. The strings should be replaced one by oneinstead of removing all the strings at once.This is done to avoid stress on the neck and to reduce the riskof affecting tremolo balance.※The method for removing and installing strings attached to a tremolo/bridge will differ depending on the type of tremolo/bridge. For details, refer to the section for the tremolo/bridge installed on your guitar. Visit our web site () for details.TUNINGWhen shipped from the factory, Ibanez guitars are set up using the following tunings.■Guitar1st2nd3rd4th5th6th7th8th9th6-strings E B G D A E---7-strings E B G D A E B--8-strings D#A#F#C#G#D#A#F-9-strings E B G D A E B F#C#■Bass1st2nd3rd4th5th6th4-strings G D A E--5-strings G D A E B-6-strings C G D A E BThere are exceptions to some models. Visit our web site () for details.Use a tuner or tuning fork to tune up the sound of each open string to the above frequencies. If the pitch is higher than the above frequency, loosen the string to lower the pitch, and wind the string in small increments to tune it up. This is an easy way to stabilize your tuning. You may need to adjust the neck or the intonation if you tune your guitar to pitches other than those shown in these tables, or if you use strings of other than standard gauge.Memo• Please note that extreme tuning or use of strings not intended for electric guitar may cause parts to break, and may cause unexpected injury.STRING HEIGHTAction refers to the distance between the frets and the string.To measure the action, tune the guitar accurately; then place a ruler at the 14th fret and measure the distance from the top of the fret to the bottom of the string.and 2.0 mm--2.2 mm for the sixth string. For a seven-string guitar, the seventh string should be at 2.2 mm--2.4 mm. For eight-string and nine string guitar, the eight string should be at 2.4mm--2.6mm.For bass, there should be about 2.0 mm at the 12th fret for the high strings and about 2.5 mm for the low strings for typical playability.For strings other than those listed above, adjust the action so that the distance gradually increases from string buzz, muted notes, or poor sustain.If you experience string buzz or muted notes even when the action is adjusted correctly, you might need to adjust the neck bow.The method of adjusting the action will depend on the type of tremolo/bridge with which your guitar is equipped. For details, refer to the appropriate tremolo/bridge section.For the bridges with stud lock function, make sure that the stud locks are released before you adjust the height.Visit our web site () for details.NECK ADJUSTMENTonly by the state of tuning and the string gauge, but also by changes in temperature and humidity.If you experience problems such as string buzz or muted notes even after the action and tuning are adjusted correctly, you should check and adjust the curvature of the neck.1. C heck the curvature of the neck. After tuningaccurately, hold the guitar in playing position. also at the fret that is nearest to the point wherethe neck joins the body, and measure the gap between the string and fret at the eighth fret In the same way, measure this gap for the lowest string, and make adjustments so that the gaps are in the range of 0.3 mm--0.5 mm.2. I f the gap is less than 0.3 mm, use a hex keywrench or socket wrench included with the guitar to turn the truss rod nut located at the headstock end of the neck or at the base of the neck in direction ‘A ’, causing the neckcurvature to be more concave.3. If the gap is greater than 0.5 mm, turn a hexkey wrench or socket wrench in direction ‘B’, causing the neck curvature to be more convex.※Adjust the truss rod nut in small increments of a quarter turn, checking the tuning while you do so.Memo• You must take care when adjusting the neck.Forced adjustments can damage your guitar. If you are unable to adjust the neck correctly, please contact your dealer or the Ibanez Corporation.INTONATIONIf you’ve changed string gauges or are using your guitar with an alternative tuning, you’ll need to adjust the string length (intonation) to ensure that the correct pitch is sounded at all frets.After tuning your guitar accurately, hold the guitar in playing position and compare the pitch of each string pressed down at the 12th fret with the pitch of the harmonic played at the 12th fret.If the pitch of the fretted note at the 12th fret is lower than the harmonic at that fret, move the saddle of the tremolo/bridge forward to shorten the string. Conversely, if the pitch of the fretted note is higher than the pitch of the harmonic, move the saddle backward to lengthen the string.※Use a tuning meter to ensure accurate intonation adjustments.※The method of adjusting the saddle position will differ depending on the installed model of tremolo/bridge. For details, refer to the section for the tremolo/bridge that’s installed on your guitar.Visit our web site () for details.CLEANINGAfter playing, wipe sweat and oil off metal parts such as the underside of the strings, the frets, bridge saddles and n ut. T his w ill h elp t o p revent r ust. D irt o r d ust t hat adheres to metal parts may adversely affect their function.Wipe off stubborn dirt with a soft cloth moistened with a small amount of oil.To clean the finished surface, do not use volatile or abrasive cleaning compounds; instead gently wipe using a soft cloth with polish formulated specifically for musical instruments.To clean off dirt that has adhered to an oil finished body or neck, use a pencil eraser, fine sandpaper of #1000 or finer grade, or #0000 steel wool. You can prevent drying by polishing once or twice a year with a colorless furniture finish oil or gun oil applied to #0000 steel wool or a cloth. Unfinished fingerboards should be carefully wiped with a clothfingerboard oil or high-quality lemon oil, wiping carefully to the edge of the frets.If the tremolo arm should squeak when turning, apply some grease to the notch on the shorter side of the tremolo arm.BATTERYIf your guitar has a built-in pre-amplifier or equalizer, it will be powered by a battery.Replace the battery when you notice that the volume level has decreased or the sound has become distorted.Some models use a 006P (9V) battery, and other models use two AA (1.5V) batteries.Check the type of batteries used by your guitar, and replace them with the same type of batteries. The batteries are found in the battery box located on the back of the body.On models equipped with a battery, the output jack also functions as a power switch; inserting a plug into the jack will turn on the power.Memo• To prevent the battery from running down, remove the plug from the output jack if you will not be using it for an extended period.。
Instruction ManualTable of ContentsFeatures (3)Specifications (3)Operating Instructions................................................................4-9 Taking a Measurement . (4)Measuring Without Temperature Probe (4)Automatically Temperature Corrected (ATC) .............................4-5 Auto Power-Off Set-up . (5)Calibration Check (5)Care and Maintenance (5)Calibration Table for Wood (6)Common Timber Species .......................................................7-9 For service on this or any other REED product or information on other REEDproducts,************************************************Features• Measure moisture content in wood either directly with the built-in moisture pins or use the remote hand-press probe (included) on hard surfaces• Automatic Temperature Compensation when used with included temperature probe improves accuracy of moisture measurements • Memory contains 8 wood groups with calibrations for approximately 170 species of wood• Built-in 2-point calibration check• User settable Auto Power-Off with override• Low battery indicatorSpecificationsMeasuring Principle: Electrical resistanceMeasuring Range: 6 to 99.9% MCAccuracy: ±1% MCMoisture Electrode: 8mm long replaceable contact pins Temp. Compensation: -31 to 176°F (-35 to 80°C)Power Supply: 2 x AAA batteriesDimensions: 7 x 1.9 x 2” (180 x 50 x 31mm)Weight: 6.1 oz (175g)Includes: Remote hand-press moisture probe,temperature probe, protective cap,replacement pins, two AAA batteries,and a soft carrying caseOptional Accessories: Replacement pins (model ST-129-P)Operating InstructionsThis instrument is a conductivity moisture meter specifically designed for the timber industry. This instrument has eight calibration scales enabling the user to take accurate moisture measurements in 150 wood species. Moisture measurements can be taken using the integral pin electrodesor by using the heavy-duty moisture probe. When used with the tem-perature probe the moisture measurements are automatically corrected with respect to the ambient temperature. This instrument is switched ON by pressing the button and switched OFF by pressing the buttonfor approx 3 seconds. The default auto power-off for this instrument is 5 minutes but can be set manually (see auto power-off set-up).Taking a MeasurementRemove the cap to expose the needle electrodes or connect the heavy-duty moisture probe on the right hand side of this instrument and switch the instrument on by pressing the button. Select the appropriate wood calibration scale (A, B, C, E, F, G, H or J) by referring to the enclosed wood calibration table (see calibration table for wood and common timber species) and by pressing the button. Push the needle pins or the heavy-duty moisture probe pins into the wood and observe the reading in the LCD display.Measuring Without Temperature ProbeThis instrument is calibrated for wood at 20°C (68°F). In general, timber that is hotter than 20°C will give higher readings and timber colder than 20°C will give lower readings. An approximate manual correction of 0.5% moisture content per 5°C may be subtracted from timber that is above 20°C. For timber that is below 20°C, a manual correction of 0.5% mois-ture content per 5°C may be added to the measured value. Automatically Temperature Corrected (ATC)Switch the instrument ON and select the appropriate wood calibration scale as detailed in ‘Taking a Measurement’. Using a hammer and nail of nominal 3mm diameter, make a hole in the wood to be tested. Remove the nail and push the temperature probe into the hole until the tip is at the required depth.continued ...Connect the temperature probe into the instrument via the temp socket. Using the instrument to measure timber you can obtain the automati-cally temperature corrected (ATC) moisture value. If you need to readthe current temperature of the timber press the button, then the LCD will display the temperature. Press the button again and the LCD will display the other °C or °F temperature. Press the button and the LCD will display the moisture value again.Auto Power-Off Set-upTo change the default auto power-off times press the and buttonstogether. Hold the button and press the button to change the auto power-off time (to either disable the auto power-off or to set it from 1 to 9 minutes) by changing the code.0 disables the auto power-off function, 1 sets the instrument to auto power-off in one minute, 2 sets it to two minutes, 3 to three minutes, and respectfully up to 9 for nine minutes for the instrument to auto power-off. Calibration CheckThere are two checked calibrators in the cap of this instrument. When checking the calibration, the A scale should be selected and the tempera-ture probe must be disconnected. Use the needle to touch the two polesof calibrator. If correctly calibrated, the instrument will register %H2Ovalues in the range 17.7 to 18.3 (at the “T” calibration) and in the range 25.5 to 26.5 (at “B” calibration). If the range is over +/-1 the Instrument can’t accurately measure the moisture of timber. Open the back cover and adjust the rheostat to make the tolerance meet the range.Care and MaintenanceWhen the instrument is not in use, keep it in its pouch together with its accessories. Store the kit in a stable, dust-free environment out of direct sunlight. Remove the batteries from the instrument if it is to be stored for periods of more than one month, or when the battery symbol appears on the display. Be sure to check the condition of the accessories used with this instrument on a regular basis and replace them if they become worn or damaged.Calibration Table for WoodThe calibration data in the below table is based on standard tests by oven drying commercial samples of the various wood species, between 7% and fiber saturation. Above fiber saturation point (25%-30%) readings are approximate and only generally apply to wood that has been dried andre-hydrated. Readings higher by 1%-2% may be obtained where wood has been impregnated with a water-borne preservative. High readings obtained with some plywood of peculiar composition must be treated with caution. For measuring building materials select scale A and refer to the following table so you can obtain the building material moisture value.Danta C Erimado F Greenheart CGurjun AHiba J Hickory F Hyedunani B Iroko F Ironbank BJarrah C Jelutong CKarpur AKarri A Keruing F Kuroka ALime E Loliondo C Makore B Mansoia BMatai E Merbau B Missanda C Muhuhi J Muninga G Musine JMusizi J Naingon C Obeche GOdoko E Okwen BOlivillo GOpepe H Padang A Persimmon G Pillarwood F Pyinkado ERamin GNotes _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________For service on this or any other REED product or information on other REEDproducts,************************************************Rubberwood H Totara E Sapele C Turpentine C Sen A Utile J Sycamore F Wawa G TallowwoodA Wandoo J Teak FWhitewoodC Yew CNotes _________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________ ________________________________________________。
