触摸屏产品型号0903

雨林木风 9.9引言雨林木风是一家知名的电子产品品牌，其主打产品包括智能手机、平板电脑、智能手表等多种电子设备。

其产品以高性能、先进技术和独特设计而闻名。

本文将对雨林木风9.9的产品进行全面介绍，包括其设计特点、主要功能和性能指标等。

一、设计特点雨林木风9.9采用了流线型的外观设计，配以金属材质和曲面玻璃后壳，展现了简约而时尚的风格。

1.1 屏幕设计雨林木风9.9屏幕采用了6英寸超大全面屏设计，分辨率达到了1080p，显示效果清晰细腻。

此外，还支持护眼模式和自动调节亮度功能，为用户提供舒适的视觉体验。

1.2 指纹识别雨林木风9.9配备了后置指纹识别传感器，可以快速准确地识别用户的指纹，实现安全解锁和支付等功能。

1.3 多功能接口雨林木风9.9还设计了多功能接口，支持Type-C接口和3.5mm耳机接口，方便用户连接外部设备和使用耳机。

二、主要功能2.1 智能摄像头雨林木风9.9搭载了两个高像素摄像头，分别是后置1600万像素主摄像头和800万像素前置摄像头。

后置主摄像头支持AI智能场景识别、人像模式和全景拍摄等功能，可以拍摄高清鲜明的照片和摄像。

2.2 强大的处理器雨林木风9.9采用了最新款的处理器，配备了8核心处理器和最新的GPU架构。

这使得设备在运行各种应用和游戏时表现出色，具有流畅的操作和出色的图形性能。

2.3 智能操作系统雨林木风9.9搭载了基于安卓系统的自家智能操作系统。

这个操作系统不仅具有流畅的界面和强大的功能，还支持人工智能和机器学习技术，为用户提供更加智能和个性化的使用体验。

三、性能指标3.1 存储容量雨林木风9.9内置了大容量存储空间，提供64GB和128GB两种选择。

用户可以根据自己的需求选择适合的存储容量。

3.2 电池续航雨林木风9.9搭载了高容量的电池，能够支持长时间的使用。

经过测试，其续航时间可达一整天以上，满足绝大部分用户的需求。

3.3 快速充电雨林木风9.9支持快速充电技术，可以在短时间内将电池充满。

Data SheetFujitsu Display B24-9 TEWidescreen 60.5 cm (23.8-inch) Advanced Ergonomic DisplayIdeal for office applications and 24/7 usageThe FUJITSU Display B24-9 TE is a widescreen display with 1920 x 1080 Full HD resolution with a ultra-thin bezel housing. The monitor has a wide viewing angle that delivers consistent picture quality and DisplayView™ manageability software for further enhancing monitor features with a range of connectivity options ideal for medium- and large-sized businesses.The 23.8-inch display with 16:9 aspect ratio at Full HD resolution for consistent clarity and superior viewing experience is ideal for office applications.The 6-in-1 stand base allows users to tilt, swivel, adjust height, and rotate monitor display as per their comfort and working style.The ultra-thin bezel housing on three sides for multi-monitoring scenarios and integrated speakers and cable guide allow for a clean desk experience.The always available USB, DisplayPort, HDMI interfaces ensure to have a complete package that meets all your business requirements.The ergonomic stand with height adjust with 345° swivel, 35° rear tilt and 45 mm picture over desk enables for an enhanced flexibility.The environmental-friendly LED technology with highly efficient energy saving functions like ECO Operation mode and ECO standy help to save on costs.The DisplayView software enables you to configure your monitor for adjusting screen brightness, pivot function and much more.Focusing on environmental friendliness, the packaging is styrofoam free andsolely consisting of cardboard, which is more than 90% recycled.Technical detailsSpecial featuresIn-Plane Switching (IPS) technologyLow blue light mode6-in-1 StandEco button for Eco mode and 3-coloured Eco status LEDAlways available USB (in operating and standby mode)DisplayView™ Software24/7 usageIntegrated speakersErgonomic standStand6-in-1 StandHeight adjust range150 mmPicture height over desk (min)45 mmRotation to portrait90°Tilt angle-5° / +35°Swivel angle345°Picture performancePanel and backlit In-Plane Switching (IPS) technology/LEDScreen Surface Treatment Anti-glare, 3H hard coatingContrast - typical1,000:1Contrast - advanced20,000,000:1Response time gray to gray typical 5 ms (in video mode)Viewing angle (h/v) - typical178°/178° CR10:1Color performance16.7 million colorsBrightness - typical250 cd/m2Size and resolutionAspect ratio16:9Diagonal Size60.5 cm (23.8-inch)Resolution (native)1,920 x 1,080 pixelResolution (interpolated)1,680 x 1,050 pixel, 1,440 x 900 pixel, 1,280 x 1,024 pixel, 1,280 x 720 pixel, 1,024 x 768 pixel, 800 x 600 pixel, 640 x480 pixelPicture size527 x 296 mmPixel Pitch0.2745 mmFrequenciesHorizontal30 - 82 kHzVertical48 - 76 HzConnectivityDisplayPort 1 x DisplayPort 1.2HDMI 1 x HDMI 1.4VGA/D-SUB 1 x D-SUBAudio signal output 3.5 mm stereo phone jack for head phoneAudio sound output 2 x 2 WAudio signal input 3.5 mm stereo phone jackUSB downstream2x USB 3.2 Gen1USB upstream 1 x USB 3.2 Gen1Ease-of-use menuDirect Access Keys Brightness, ECO, Input, Mode, Audio, MenuLanguages Arabic, Czech, Danish, Dutch, English, Finnish, French, German, Italian, Norwegian, Polish, Portuguese, Russian,Spanish, Swedish, Turkish, Japanese, Chinese simply, Chinese traditionalBrightness / Contrast Brightness, Contrast, Black level, Auto level, ACRMode sRGB, Office, Photo, Video, Low Blue LightColor sRGB, 5000K, 6500K, 7500K, Native, Custom Color (R,G,B)OSD Language, OSD-Timeout, OSD rotationImage adjust Clock, Phase, H-Position, V-Position, Expansion, SharpnessAudio Mute, Volume, Input for HDMI and DP interfaceInformation Model name, Serial number, Signal input, Resolution/mode, Display mode , Color Temperature, ACR Status Advanced settings Overdrive, DDC/CI, Factory RecallPower consumption (typical, w/o sound)Soft switch off0.1 WPower save mode0.17 WOperating with EPA settings14.25 WTotal Energy Consumption (ETEC)44.66 kWh/yearOperating maximum brightness22 WPower supply integratedPower notes Speakers off, USB not connectedETEC and EPA refer to ENERGY STAR® 8.0Electrical valuesRated voltage range100 V - 240 VRated frequency range50 Hz - 60 HzProtection class1ComplianceModel DY24-9TGlobal ENERGY STAR® 8.0, TÜV Low Blue Light Certified, TÜV Flicker Free Certified, Zero bright and dark pixel faults, Subpixelfaults according to ISO9241-307 (Pixel fault class I), EPEAT® Silver (dedicated regions), TCO CertifiedEurope EN 62368-1, CE certification according to EC Directive 2004/108/EEC, RoHS, WEEE, IT-Eco-DeclarationAustralia/New Zealand RCMChina CCCGermany TÜV GSRussia EACSingapore S-MarkSouth Korea KCTaiwan BSMIUSA/Canada FCC Class B, cTUVusCompliance link https:///sites/certificatesDimensions / Weight / EnvironmentalDimension without stand (W x D x H)540.3 x 64 x 325.6 mm21.27 x 2.52 x 12.82 inchDimension with stand (W x D x H)540.3 x 229.4 x 346.2 mm21.27 inch x 9.03 x 13.63 inchWeight (unpacked) 5.25 kg11.57 lbsWeight (Monitor only) 3.21 kg7.08 lbsOperating ambient temperature 5 - 35 °C (41 - 95 °F)Operating relative humidity10 - 85 % (non condensing)MiscellaneousMiscellaneous VESA DDC/ CI, Flat Display Mounting Interface VESA MIS-D 100 C, Kensington lock preparedColor Marble greyAdditional SoftwareAdditional software (optional)WINDOWS WHQL driverDisplayView SuiteAdditional software (notes)Use of accompanying and/or additional Software is subject to proactive acceptance of the respective LicenseAgreements /EULAs/ Subscription and support terms of the Software manufacturer as applicable for the relevantSoftware whether preinstalled or optional. The software may only be available bundled with a software supportsubscription which – depending on the Software - may be subject to separate remuneration.Package contentDisplay delivered accessories DisplayPort data cable 1.8 mUSB-cable 1.8 m (USB-A to USB-B)Power cable for wall socket (Euro-Schuko-Type CEE7) 1.8 mQuickstart flyerSafety notesDisplay delivered accessories notes Power cable with IEC-60320-C13, 3-pin connector on display sideData cables and USB cable detachable on displayUser manual and DisplayView Software is available via downloadPackaging dimension (mm)655 x 411 x 220 mmPackaging dimension (inch)25.79 x 16.18 x 8.66 inchWeight (packed)7.1 kgWeight (packed) (lbs)15.65 lbsOrder informationOrder Code S26361-K1713-V140EAN Code4065221888260Country specific order code BDL:K1713V140-UK - with UK power cable, mandatory for Arabian countriesBDL:K1713V140-CHN - with China power cable and CEL, mandatory for ChinaBDL:K1713V140-INT - W/o power cable, mandatory for countries where import with EU cable is not allowed Accessories information Further helpful options:Stands and Mounting kits:/fts/products/computing/peripheral/accessories/desktop/ums/index.htmlAvailable Adapters: /dmsp/Publications/public/pos-connectivity.pdfWarrantyWarranty period 3 years (depending on country)Warranty Terms & Conditions /warrantyDigital bug fixes Subject to availability and following their generic release for the product, bug fixes and function-preserving patchesfor product-related software (firmware) can be downloaded from the technical support at: https://support.ts.fujitsu.com/ free of charge by entering the respective product serial number. For application software supplied togetherwith the product, please directly refer to the support websites of the respective software manufacturer.Spare Parts availability at least 7 years after shipment, for details see https:///Service Weblink /emeia/products/product-support-services/CONTACTFujitsu Technology Solutions GmbH Website: 2023-11-27 EM-ENworldwide project for reducing burdens on the environment.Using our global know-how, we aim to contribute to the creation of a sustainable environment for future generations through IT.Please find further information at http://www./global/about/environmenttechnical specification with the maximum selection of components for the named system and not the detailed scope ofdelivery. The scope of delivery is defined by the selection of components at the time of ordering.Technical data is subject to modification and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective owner, the use of which by third parties for their own purposes may infringe the rights of such owner.The overall product has been designed and manufactured for general office use, regular personal use and ordinary industrial use.More informationAll rights reserved, including intellectual property rights. Designations may be trademarks and/or copyrights of therespective owner, the use of which by third parties for their own purposes may infringe the rights of such owner. For further information see https:///global/about/resources/terms/ Copyright 2023 Fujitsu Technology Solutions GmbH。

hnd09e3y说明书
【产品简介】
hnd09e3y 是一款集功能一、功能二、功能三于一体的电子产品。

产品名称简洁明了，易于记忆，为用户提供了高效便捷的使用体验。

【产品操作】
使用hnd09e3y 时，用户需按照操作步骤一、操作步骤二、操作步骤三进行。

具体操作步骤请参考说明书中的详细说明。

【产品维护】
在维护hnd09e3y 时，用户需注意维护注意事项。

维护时，请按照维护步骤一、维护步骤二进行。

维护过程中，请确保安全，避免发生意外。

【产品安全】
使用hnd09e3y 时，请遵守使用安全提示，注意安全事项。

如遇紧急情况，请参照紧急处理方法进行处理。

【产品规格】
hnd09e3y 的产品尺寸为长x 宽x 高，产品重量为xx 克。

产品参数包括功能一、功能二、功能三的性能指标。

具体参数请参阅说明书。

【产品附件】
hnd09e3y 附带了附件名称一、附件名称二、附件名称三。

附件在使用过程中起到辅助作用，请妥善保管。

【售后服务】
我们承诺为用户提供优质的售后服务。

售后服务政策包括保修期限、退换
货规定等。

如有售后需求，请按照售后服务流程进行操作，或直接联系我们。

i s c l a im e r : T h i s d o c u m e n t a t i o n i s n o t i n t e n d e d a s a s u b s t i t u t e f o r a n d i s n o t t o b e u s e d f o r d e t e r m i n i n g s u i t a b i l i t y o r r e l i a b i l i t y o f t h e s e p r o d u c t s f o r s p e c i f i c u s e r a p p l i c a t i o n sMainRange of productMagelis GTO Product or component typeAdvanced touchscreen panel Display colour65536 colours Display size12.1 inch SupplyExternal source Battery type Lithium battery for internal RAM, autonomy: 100 days, charging time = 5 d, battery life = 10 yr ComplementaryTerminal typeTouchscreen display Display typeBacklit colour TFT LCD Display resolution800 x 600 pixels SVGA Touch sensitive zone1024 x 1024Touch panelResistive film, 1000000 cycles Backlight lifespan50000 hours (white) at 25 °C Brightness16 levels - control by touch panel 16 levels - control by software Character font Taiwanese (traditional Chinese)KoreanChinese (simplified Chinese)ASCII (European characters)Japanese (ANK, Kanji)[Us] rated supply voltage 24 V DCSupply voltage limits 19.2...28.8 VInrush current <= 30 APower consumption in W <= 17 W<= 12 W (when power is not supplied to external devices)<= 7 W (when backlight is OFF)<= 8 W (when backlight is dimmed)Local signalling Status LED (orange) flashing software starting upStatus LED (green) steady offlineSDHC card <= 32 GBDownloadable protocols Modbus Plus Schneider Electric ModiconFIPWAY Schneider Electric ModiconModbus TCP Schneider Electric ModiconModbus Schneider Electric ModiconThird party protocols Mitsubishi MelsecThird party protocols Omron SysmacThird party protocols Rockwell Automation Allen-BradleyThird party protocols Siemens SimaticUni-TE Schneider Electric ModiconIntegrated connection type COM1 serial link SUB-D 9, interface: RS232C, transmission rate: 2400...115200 bpsCOM2 serial link RJ45, interface: RS485, transmission rate: 2400...115200 bpsCOM2 serial link RJ45, interface: RS485, transmission rate: 187.5 kbps compatible with SiemensMPIUSB 2.0 port USB type AUSB 2.0 port mini B USBEthernet RJ45, interface: 10BASE-T/100BASE-TXEthernet RJ45, interface: IEEE 802.3Product mounting Flush mountingFixing mode By 4 screw clampsFront material PPTEnclosure material PPTType of cooling Natural convectionWidth315 mmHeight241 mmDepth56 mmProduct weight 2.5 kgEnvironmentStandards IEC 61000-6-2UL 508EN 61131-2Product certifications C-TickCEcULusKCCAmbient air temperature for operation0...55 °CAmbient air temperature for storage-20...60 °CRelative humidity10...90 % without condensationOperating altitude< 2000 mIP degree of protection IP20 rear panel conforming to IEC 60529IP65 front panel conforming to IEC 60529NEMA degree of protection NEMA 4X front panel (indoor use)Shock resistance147 m/s² 3 chocks in each direction X, Y and Z conforming to EN/IEC 61131-2Vibration resistance 3.5 mm (f = 5...9 Hz) conforming to EN/IEC 61131-2 X, Y, Z directions for 10 cycles (approx. 100min)1 gn (f = 9...150 Hz) conforming to EN/IEC 61131-2 X, Y, Z directions for 10 cycles (approx. 100 min) Resistance to electrostatic discharge 6 kV contact discharge conforming to IEC 61000-4-2 level 3Product environmental Product end of life instructionsAvailableEnd of life manualContractual warranty Warranty period 18 monthsExternal Dimensions1Front2Right Side3Top1Left Side 2Front3Right Side 4Top5Bottom1Left Side 2Rear3Right Side 4Top5BottomPanel Cut DimensionsInstallation Fastener DimensionsMounting AngleWhen installing the panel in a slanted position with an incline more than 30°, the ambient temperature must not exceed 40 °C (104 °F). You may need to use forced air cooling (fan,A/C) to ensure the ambient operating temperature is 40°C or less (104 °F or less).Clearance。

GETTING STARTED GUIDENI sbRIO-9607Single-Board RIO OEM DevicesThis document describes how to begin using the NI sbRIO-9607.Safety GuidelinesOperate the sbRIO-9607 only as described in the user documentation.Caution The sbRIO-9607 must be installed in a suitable enclosure prior to use.Caution NI makes no product safety, electromagnetic compatibility (EMC), or CEmarking compliance claims for the sbRIO-9607. The end-product supplier isresponsible for conformity to any and all compliance requirements.Caution Exercise caution when designing an enclosure for the sbRIO-9607.Auxiliary cooling may be necessary to keep the sbRIO-9607 within the specifiedoperating temperature range. Refer to the NI sbRIO-9607 Specifications on /manuals for more information about the maximum operating temperature rating. Forinformation and examples regarding factors that can affect thermal performance,visit /info and enter the Info Code sbriocooling.Caution Do not operate the sbRIO-9607 in a manner not specified in thisdocument. Product misuse can result in a hazard. You can compromise the safetyprotection built into the product if the product is damaged in any way. If the productis damaged, return it to NI for repair.Safety VoltagesConnect only voltages that are below these limits.V terminal to C terminal30 VDC maximum, Measurement Category I Measurement Category I is for measurements performed on circuits not directly connected to the electrical distribution system referred to as MAINS voltage. MAINS is a hazardous live electrical supply system that powers equipment. This category is for measurements of voltages from specially protected secondary circuits. Such voltage measurements include signal levels, special equipment, limited-energy parts of equipment, circuits powered by regulated low-voltage sources, and electronics.Caution Do not connect the sbRIO-9607 to signals or use for measurements withinMeasurement Categories II, III, or IV.Preparing the EnvironmentEnsure that the environment in which you are using the sbRIO-9607 meets the following specifications.-40 °C to 85 °CLocal ambient operating temperature neardevice (IEC 60068-2-1, IEC 60068-2-2)Maximum reported onboard sensor temperatureCPU/FPGA temperature98 °CPrimary System temperature85 °CSecondary System temperature85 °CNote Ensure that the local ambient, reported CPU/FPGA, and reported PrimarySystem temperatures do not exceed any of the maximum temperatures listed in thisdocument. For more information about how to access the onboard sensors, visit/info and enter the Info Code sbriosensors.Operating humidity (IEC 60068-2-78)10% RH to 90% RH, noncondensing Pollution Degree (IEC 60664)2Maximum altitude5,000 mIndoor use only.Note Refer to the device specifications on /manuals for completespecifications.2| | NI sbRIO-9607 Getting Started GuideUnpacking the KitCaution To prevent electrostatic discharge (ESD) from damaging the device,ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis.1.Touch the antistatic package to a metal part of the computer chassis.2.Remove the device from the package and inspect the device for loose components or anyother sign of damage.CautionNever touch the exposed pins of connectors.Note Do not install a device if it appears damaged in any way.3.Unpack any other items and documentation from the kit.Store the device in the antistatic package when the device is not in use.Verifying the Kit ContentsVerify that the following items are included in the sbRIO-9607 kit.Figure 1.sbRIO-9607 Kit Contents1.sbRIO Device2.NI CompactRIO Device Drivers Media3.Getting Started Guide4.Power Supply5.10-pin IDC to 9-pin DSUB Cable6.Power Cable Assembly7.Standoffs and Screws8.NI 9694 Digital I/O Breakout RMC BoardNote The provided power supply is only intended for the getting startedexperience. NI recommends the use of a power supply that meets the specifications listed in the NI sbRIO-9607 Specifications for system deployment.NI sbRIO-9607 Getting Started Guide | © National Instruments | 3Installing Software on the Host ComputerBefore using the sbRIO-9607, you must install the following application software and device drivers on the host computer.bVIEW 2015 or laterbVIEW Real-Time Module 2015 or laterbVIEW FPGA Module 2015 or later4.NI CompactRIO Device Drivers August 2015 or laterFor minimum software support information, visit /info and enter the Info Code softwareversion.Connecting the sbRIO-9607The sbRIO-9607 has the following components.Figure 2. sbRIO-9607 Components1.J9, Power Connector2.Chassis Ground Bracket3.J10, USB Host Port4.W1, CAN (CAN0)5.J7, RJ-45 Ethernet Port6.W2, RS-232 (COM1)7.Reset Switch8.LEDs 9.Mounting Holes Connected to Chassis Ground10.Ethernet RGMII Transceiver11.ULPI USB T ransceiver12.FPGA Processor13.DDR Memory14.NAND Flash15.CPLD16.J1, RIO Mezzanine Card Connector4| | NI sbRIO-9607 Getting Started GuideConnecting the sbRIO-9607 to PowerThe NI sbRIO device requires a 9 VDC to 30 VDC external power supply. The NI sbRIO device filters and regulates the supplied power and provides power for RMCs.Note Refer to the Power Requirements section of the NI sbRIO-9607Specifications for the complete power requirement specifications.Note Refer to the Power Requirements section of the NI sbRIO-9607 User Manualfor formulas and examples for calculating power requirements for differentconfigurations and application types.Note Refer to the Power Requirements section of the NI sbRIO-9607 User Manualfor proper wiring of the power cable assembly.Complete the following steps to connect a power supply to the device.Caution Do not mate or unmate the power supply connectors while power isapplied.1.Ensure that your power supply is powered off.2.Insert the power connector plug into the power connector receptacle of the NI sbRIOdevice until the connector latches into place.3.Turn on the power supply.Powering On the NI sbRIO DeviceThe NI sbRIO device runs a power-on self test (POST) when you apply power to the device. During the POST, the Power and Status LEDs turn on. When the Status LED turns off, the POST is complete. If the LEDs do not behave in this way when the system powers on, refer to the STATUS LED Indicators section.Connecting the sbRIO-9607 to the Host Computer Complete the following steps to connect the sbRIO-9607 to the host computer using the RJ-45 Ethernet port.1.Power on the host computer.2.Connect the sbRIO-9607 to the host computer using a standard Category 5 (CAT-5) orbetter shielded, twisted-pair Ethernet cable.Caution To prevent data loss and to maintain the integrity of your Ethernetinstallation, do not use a cable longer than 100 m.The first time you power up the device, it attempts to initiate a DHCP networkconnection. If the device is unable to initiate a DHCP connection, it connects to thenetwork with a link-local IP address with the form 169.254.x.x. After the device hasNI sbRIO-9607 Getting Started Guide| © National Instruments| 5powered up, you must install software on the device and configure the network settings in MAX.Note Installing software may change the network behavior of the device. Forinformation about network behavior by installed software version, visit /info and enter the Info Code ipconfigcrio.Configuring the System in Measurement & Automation Explorer (MAX)Complete the following steps to find the system in MAX.unch MAX on the host computer.2.Expand Remote Systems in the configuration tree and locate your system.3.Tip MAX lists the system under the model number followed by the serialnumber, such as NI-sbRIO-9607-########.Complete the following steps to set a system password.Note The default username for the sbRIO-9607 is admin. There is no defaultpassword for the sbRIO-9607, so you must leave the password field blank whenlogging in until you set a system password.1.Right-click your system and select Web Configuration.The NI Web-Based Configuration and Monitoring utility opens in your default browser and is where you set the password. If you have not installed Microsoft Silverlight,NI Web-based Configuration & Monitoring prompts you to do so.2.Enter a unique name for your system in the Hostname field.3.Click the Security Configuration icon.4.Click Login.5.In the Login dialog box, enter the username admin and leave the password field blank.6.Click OK.7.Click Change Password.8.Enter and re-enter a new password.9.Click OK.10.Click Save.11.Click OK to confirm you are changing the password.Caution NI cannot recover lost system passwords. If you forget the password,you must contact NI and reformat the controller.6| | NI sbRIO-9607 Getting Started GuideInstalling Software on the sbRIO-9607Complete the following steps to install software on the sbRIO-9607.1.In MAX, expand your system under Remote Systems.2.Right-click Software.3.Add/Remove Software to launch the LabVIEW Real-Time Software Wizard.Tip You must log in if you set a system password.4.5.Click Next.6.Select NI Scan Engine from the software add-ons.Select any additional software to install. If you plan on using the sbRIO-9607 with theNext.Tip You can use this wizard at anytime to install additional software.7.Next.8.9.Click Next to start the installation.10.Click Finish when the installation is complete.Troubleshooting the sbRIO-9607The sbRIO-9607 is Not Communicating with the Network•Ensure that the Ethernet connections between the sbRIO-9607 and the host computer and the Ethernet connections between the host computer and the router are secure.•Ensure that you have the correct version of NI CompactRIO Device Drivers installed on the host computer. Visit /info and enter the Info Code softwareversion for theTip If you have recently upgraded LabVIEW, you must reinstall NICompactRIO Device Drivers.•e a standard Category 5 (CAT-5) or better shielded, twisted-pair Ethernet cable toconnect the sbRIO-9607 Ethernet port to a host computer. The sbRIO-9607 attempts to initiate a DHCP network connection at powerup.NI sbRIO-9607 Getting Started Guide| © National Instruments| 72.In MAX, expand your system under Remote Systems and select Troubleshoot RemoteSystem Discovery.System ResetThe following figure shows the reset behavior of the sbRIO-9607.Figure 3. Reset Button BehaviorPress and holdPress and holdRESET button for ≥ 5 sSTA TUS LED IndicatorsThe following table lists the STATUS LED indicators.8| | NI sbRIO-9607 Getting Started GuideTable 1. ST ATUS LED IndicatorsNI sbRIO-9607 Getting Started Guide| © National Instruments| 9Where to Go NextWorldwide Support and ServicesThe National Instruments website is your complete resource for technical support. At / support, you have access to everything from troubleshooting and application development self-help resources to email and phone assistance from NI Application Engineers.Visit /services for NI Factory Installation Services, repairs, extended warranty, and other services.Visit /register to register your National Instruments product. Product registration facilitates technical support and ensures that you receive important information updates from NI.National Instruments corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas, 78759-3504. National Instruments also has offices located around the world. For telephone support in the United States, create your service request at /support or 10| | NI sbRIO-9607 Getting Started Guidedial 1 866 ASK MYNI (275 6964). For telephone support outside the United States, visit the Worldwide Offices section of /niglobal to access the branch office websites, which provide up-to-date contact information, support phone numbers, email addresses, and current events.NI sbRIO-9607 Getting Started Guide| © National Instruments| 11Refer to the NI Trademarks and Logo Guidelines at /trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at /patents. Y ou can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the ExportCompliance Information at /legal/export-compliance for the National Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMA TION CONT AINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.© 2014—2015 National Instruments. All rights reserved.376414A-01Aug15。

2020年第⼆批医疗器械产品分类界定结果汇总（完整版）2020年第⼆批医疗器械产品分类界定结果汇总（完整版）本次汇总的近期医疗器械产品分类界定结果共321个，其中建议按照Ⅲ类医疗器械管理的产品60个，建议按照Ⅱ类医疗器械管理的产品94个，建议按照I类医疗器械管理的产品49个，建议不单独作为医疗器械管理的产品23个，建议按照药械组合产品申请属性界定的产品4个，建议不作为医疗器械管理的产品86个，建议组合包内各组成部分分别按照药品和医疗器械管理的产品1个，建议视具体情况⽽定的产品4个。

相关产品分类界定结果是基于申请⼈提供的资料得出，不代表对其产品安全性和有效性的认可，仅作为医疗器械产品注册和备案的参考；结果中产品描述和预期⽤途是⽤于判定产品的管理属性和类别，不代表相关产品注册或备案内容的完整表述。

《医疗器械分类⽬录》中暂⽆对应⼀级产品类别的“分类编码”以“00”表⽰，如“多功能呼吸排痰系统”的分类编码：08-00。

⼀、建议按照Ⅲ类医疗器械管理的产品（60个）1. 微型⽪⽚扩展载⽚敷料及软⽊盘：由扩展载⽚敷料和软⽊盘组成。

其中扩展载⽚敷料由铝箔基⽚和聚酰胺纱布组成，已预折叠，使⽤时可扩展开。

软⽊盘采⽤⽊材制成。

⽆菌提供,⼀次性使⽤。

与烧伤植⽪机、粘合剂配合使⽤，⽤于分离和扩展⽪岛后覆盖于烧伤植⽪创⾯上，以覆盖更⼤的植⽪区域，促进上⽪化。

使⽤时，将软⽊盘浸泡在⽣理盐⽔约3～5分钟后取出。

取下患者⾃体⽪肤条充分展开摊平在操作台上，将浸泡后的软⽊盘覆盖在⽪肤条上，沿着软⽊盘边缘将⽪条切割成和软⽊盘同样⼤⼩的42mm×42mm⼀块块⽪⽚。

⽤烧伤植⽪机将覆盖在软⽊盘上的⽪⽚切割成排列整齐的196块3mm×3mm⼤⼩的⽪岛；在⽪岛表⾯喷涂适量的粘合剂，待粘合剂表⾯变暗淡后，即可将软⽊盘附有⽪岛的⼀⾯按压到扩展载⽚敷料的预折叠中⼼区域；然后移除软⽊盘，⽪岛就黏贴到扩展载⽚敷料上。

按垂直的两个⽅向充分平拉伸展开预折叠的扩展载⽚敷料，使其上的⽪岛扩展开；再将可扩展载⽚敷料附有⽪岛的⼀⾯对着预定植⽪的烧伤创⾯，敷贴其上，然后⽤绷带加压包扎。

LG OptimusLG Optimus 2X本参数型号P993（行货）P990（水货）SU660（韩版名称）手机类型智能手机,拍照手机,双核手机,3G手机上市时间2011年手机制式GSM,WCDMA(联通3G)手机频段WCDMA 850/900/1900/2100MHz,GSM 850/900/1800/1900 系统Android 2.2[1]手机外形直板主屏尺寸 4.0英寸主屏材质IPS主屏色彩1600万色主屏参数480×800像素(WVGA)触摸屏电容屏,多点触摸CPU品牌英伟达(Nvidia)CPU Nvidia Tegra2 1GHz(双核)CPU频率1000MHz内存容量512MB RAM,8G ROM标准配置主机,1500mAh锂电池,数据线,耳机,充电器,说明书电池容量1800mAH外壳颜色黑色,白色尺寸123.9×63.2×10.9mm重量139g产品特性重力感应,距离感应,3D加速,电子罗盘,光线感应,hdmi基本功能铃声支持MP3,MIDI等格式信息功能SMS短信,MMS短信E-mail收发支持E-mail输入法手写输入,英文输入法,中文输入法,第三方输入法游戏内置游戏,支持下载主要功能内置天线,时钟,内置震动,待机图片,动画屏保功能,来电图片识别,来电铃声识别,飞行模式,主题模式附加功能闹钟,日历,计算器,日程表,备忘录,世界时钟,秒表,自动键盘锁,办公工具,数据备份数据应用功能蓝牙支持蓝牙WAP上网支持wapWWW浏览器支持WWW浏览器数据线USB 2.0,3.5mm耳机接口扩展卡支持TF卡(microSD卡)WiFi(WLAN)支持WiFiGPS定位系统支持GPS,内置GPS导航芯片,支持A-GPS网络辅助导航功能拍照功能摄像头像素800万像素摄像头内置摄像头闪光灯LED补光灯照片质量支持最大3264×2448分辨率照片拍摄拍摄特色自动对焦,支持连拍功能,定时器视频拍摄有声视频拍摄,支持1080p(1920×1080)视频录制多媒体娱乐功能多媒体FM收音,3.5mm耳机接口,电子书,HDMI输出,720P,,流媒体,SNS支持,即时通讯,应用程序MP3播放器支持MP3播放,支持MP3,AAC,AMR,W A V,MID等格式视频播放支持视频播放,支持MP4,3GP,A VC,A VI,MPEG-4等格式图形浏览支持JPEG,PNG,GIF,BMP等格式详细内容：自购机日起（以购机发票为准），如因质量问题或故障，凭厂商维修中心或特约维修点的质量检测证明，享受7日内退货，15日内换货，15日以上在质保期内享受免费保修等三包服务！注：单独购买手机配件产品的用户，请完好保存配件外包装以及发票原件，如无法提供上述凭证的，将无法进行正常的配件保修或更换。

tu933规格书摘要：1.背景介绍2.产品概述3.产品规格4.产品优势5.应用场景6.市场前景正文：随着科技的飞速发展，市场上涌现出越来越多的创新产品。

在此背景下，本文将为您介绍一款具有高性能、实用性的产品——tu933。

接下来，我们将从产品概述、规格、优势、应用场景和市场前景五个方面为您详细剖析这款产品。

一、背景介绍在智能化、信息化时代的推动下，人们对于电子产品的需求日益增长，对产品性能和功能的要求也越来越高。

为了满足市场需求，厂商们不断研发新产品，提升产品性能。

tu933就是在这样的背景下应运而生的一款高性能产品。

二、产品概述tu933是一款集多种功能于一体的电子产品。

它具备出色的性能，可以为用户提供高效、便捷的服务。

此外，tu933在外观设计上也颇具匠心，简约时尚，深受消费者喜爱。

三、产品规格tu933的规格非常齐全，包括以下几个方面：1.处理器：采用高性能处理器，运行速度快，能够满足用户多种需求。

2.内存：配置大容量内存，保障系统流畅运行，轻松应对多任务处理。

3.存储：提供大容量存储空间，让用户随心所欲地存储文件、图片、视频等。

4.显示器：采用高清晰度显示器，呈现细腻画质，带给用户优质的视觉体验。

5.电池：配备长寿命电池，续航能力强，满足用户全天候使用需求。

四、产品优势tu933具备以下优势：1.高性能：采用高性能处理器和内存，确保产品在运行大型软件和多任务处理时依然流畅。

2.便捷功能：具备丰富的接口和扩展能力，方便用户连接各种设备和使用第三方软件。

3.省电设计：采用低功耗技术，延长产品续航时间，减少用户充电次数。

4.安全性：具备严密的安全防护措施，保护用户数据和隐私。

5.价格合理：tu933在性能与品质上具有较高竞争力，价格相对实惠。

五、应用场景tu933适用于多种场景，如：1.商务办公：处理文档、演示、邮件等任务，提高工作效率。

2.学习研究：查阅资料、撰写论文、在线学习等。

3.娱乐休闲：观看高清视频、玩游戏、听音乐等。

上海海关触摸屏查询一体机整体要求数量：8套1、货物名称：液晶触摸查询一体机：敏捷MG502A-192、设备质量要求：整机需通过ISO9001 : 2000国际质量体系认证；整机需通过国家强制性产品（CCC）认证；3、制造商商要求：厂房不低于2000平米，上海厂商优先考虑；供货周期5个工作日；4、技术规格（以下参数为最低配置，实物参数应根据行情高于此配置）显示器：专业19.1英寸LCD高亮度液晶品牌显示器触摸屏：19.1英寸表面声波触摸屏透光率：90%以上分辨率：4096*4096触摸屏寿命：单点5000万次以上（以下参数为最低配置，实物参数应根据行情高于此配置）主机：Pentium E3200 双核；技嘉品牌主板；内存：kingston 2G-DDR2硬盘：WD320G SATA7200 转；电源：300W；易拓一体机机柜：全钢模具制造，表面金属烤漆，独立电源管理，多媒体音响功放，内部构件全部电镀，彻底防锈、防磁、防静电，简约大方，散热性好；内置电源分配系统，内置立体声有源音响系统，提供计算机复位开关、音量调节、电源开关、标准RJ45网络接口；工作环境温度：-20 C ~ +60 C湿度：40% ~ 80% （相对，非压缩）电压：AC220V± 10% 50Hz ± 1Hz功耗：v 300W5、安装调试及保修提供现场安装使用调试；整机三年保；必须达到4小时内响应，24小时内修复；需提供厂商三年保证明；7、界面及其结构要求系统可以打开上海海关相关的Web站点进行浏览，但要控制好用户的操作不能威胁系统的安全运行，防止他人非法利用触摸屏。

系统能够指定并授权触摸屏允许打开的站点地址，并且地址可以方便的进行维护。

技术参数MG502A -19寸触摸查询一体机备注：1、上海地区免费送货；2、总价含三年质保服务;。

N S2009接口4线电阻触摸屏控制电路I C2NS2009用户手册V1.1深圳市纳芯威科技有限公司2011年8月1功能说明 (5)2主要特性 (5)3应用领域 (5)4典型应用电路 (5)5极限参数 (6)5.1电气特性 (7)6芯片管脚描述 (8)6.1管脚分配图 (8)6.2引脚功能描述 (9)7NS2009典型参考特性 (9)8工作原理 (11)8.1基本原理描述 (11)8.2模拟输入特性 (11)8.3差分工作模式 (12)8.4触摸屏应用建议 (12)8.5压力测量 (12)9数字接口 (13)9.1写命令 (13)9.2读命令 (14)9.3高速模式 (15)9.4数字时序 (15)9.5数据格式 (17)10笔中断输出 (17)11应用注意事项 (18)12芯片封装物理尺寸 (19)12.1MSOP-10封装 (19)12.2QFN(3×3)-16L封装 (20)图目录图1NS2009典型应用电路 (5)图2MSOP-10封装管脚分配图(top view) (8)图3QFN(3×3)-16封装管脚分配图(top view) (8)图4NS2009模拟输入简图 (11)图5差分参考源工作模式简图（C3=1，Y方向驱动开关闭合，XP作为模拟输入） (12)图6压力测量模块图 (13)图7I2C接口写命令时序图 (13)图8I2C接口读命令时序图 (15)图9NS2009数字接口时序图 (15)图10理想情况输入电压和输出编码对应关系 (17)图11PENIRQ功能模块图 (18)图12MSOP-10封装尺寸 (20)图13QFN(3×3)-16L封装尺寸 (21)表目录表1芯片极限参数表 (6)表2NS2009电气特性表 (7)表3ADC输入信号配置 (11)表4地址字节 (14)表5命令字节 (14)表6PD0控制位 (14)表7时序规范说明 (15)1功能说明NS2009是一款带I2C接口的4线制电阻式触摸屏控制电路，内含12位分辨率A/D转换器。

三菱触摸屏型号大全三菱触摸屏来到中国有20多年的历史，现在市场上主要使用的有以下系列：GT1150系列、GT1155系列、GT1175系列、GT1575系列、GT1585系列、GT1595系列、A970GOT系列、A975GOT系列、A985GOT系列、F930GOT系列、F940GOT系列。

三菱变频器深圳梦翔宇科技程杰幺三四幺零五三七六九七百度：各种三菱触摸屏型号A系列A985GOT-TBA-VA985GOT-TBD-VA985GOT-TBAA985GOT-TBDA975GOT-TBA-BA975GOT-TBD-BA970GOT-TBA-BA970GOT-TBD-BA970GOT-SBAA970GOT-SBDA970GOT-LBAA970GOT-LBDA960GOT-EBAA960GOT-EBD-[A900GOT MAIN DISPLAY UNITS]A950GOT-TBDA950GOT-SBDA950GOT-LBDA950GOT-TBD-M3A950GOT-SBD-M3A950GOT-LBD-M3A951GOT-QTBDA951GOT-QSBDA951GOT-QLBDA951GOT-QTBD-M3A951GOT-QSBD-M3A951GOT-QLBD-M3A951GOT-SBDA951GOT-LBDA951GOT-SBD-M3A951GOT-LBD-M3A953GOT-SBDA953GOT-LBDA953GOT-SBD-M3A953GOT-LBD-M3A956GOT-SBDA956GOT-LBDA956GOT-SBD-M3A956GOT-LBD-M3MitsubishiProgrammable ControllerPRICE LISTMITSUBISHI HUMAN MACHINE INTERFACE PRODUCT MODELF系列-[F900GOT/FX DU MAIN DISPLAY UNITS]F940WGOT-TWD-CF940WGOT-TWD-EF940GOT-SWD-CF940GOT-LWD-CF930GOT-BWD-CF930GOT-BBD-K-CF920GOT-BBD5-K-CFX-50DU-TKS-CFX-50DU-TK-CFX-40DU-TK-ESFX-40DU-ESFX-30DU-ESFX-20DU-EFX-10DU-EFX-10DM-EFX1N-5DMMitsubishiProgrammable ControllerMITSUBISHI HUMAN MACHINE INTERFACE PRODUCT MODEL-[A900GOT COMMUNICA TION ADAPTERS]A9GT-BUSSA9GT-BUS2SA9GT-RS4A9GT-RS2A9GT-80R1A9GT-80V AA7GT-J71AP23A7GT-J71AR23A7GT-J71AT23BA7GT-J71LP23A7GT-J71BR13A8GT-J61BT13A8GT-J61BT15A8GT-J71QLP23A8GT-J71QBR13A9GT-QBUSSA9GT-QBUS2SA9GT-J71E71-T-[A900GOT CABLES]AC30R4-25PAC100R4-25PAC300R4-25PFX-9GT-CAB0-150FX-9GT-CAB0FX9GT-CAB0-10MA8GT-C12NBA8GT-C30NBA8GT-C50NBA8GT-C100EXSSA8GT-C200EXSSA8GT-C300EXSSA8GT-C100BSA8GT-C200BSA8GT-C300BSA1SC07BA1SC30BA1SC50BAC06BAC12BAC30BAC50BAC12B-RAC30B-RAC50B-RA7GT-CNBAC300PIO-20PAC30PIO-20PAC30R2-9PAC30R2-9SSA9GT-QCNBMitsubishiProgrammable ControllerPRICE LISTMITSUBISHI HUMAN MACHINE INTERFACE PRODUCT MODEL-[A900GOT MEMORY CASSETTE]A9GT-FNBA9GT-FNB1MA9GT-FNB2MA9GT-FNB4MA9GT-FNB8MA9GT-QFNBA9GT-QFNB4MA9GT-QFNB8MA9GTMEM-10MFA9GTMEM-20MFA9GTMEM-40MF-[A900GOT CONSUMABLE ACCESSORIES]A9GT-80PSCA9GT-80PSCLA9GT-70PSCA9GT-70PSCLA9GT-60PSCA9GT-60PSCLA9GT-50PSCA9GT-70STANDA9GT-70LTTA9GT-70LTSA9GT-70KBFA9GT-50KBF- [F900GOT/FX DU CABLE & TOOLS]FX-422CABF2-232CABFX-422AW0FX-40DU-CABFX-50DU-CAB0FX-50DU-CAB0-10MFX-50DU-CAB0-RFX-20P-CAB0FX-20P-CAB0-RFX-20DU-CAB0F9GT-40PSCF9GT-30PSCA9GT-70KBFA9GT-50KBF-[PROGRAMMING SOFTWARE]GT Designer-CFX-PCS-DU/WIN-CSW5D5C-GTWORKS-SEGT系列5.7" GT1150-QBBD-C 分辨率:320X240 显示色彩:单色显示16级灰度(白/蓝)5.7" GT1155HS-QSBD 分辨率:320X240 显示色彩:256色,单色显示16级灰度5.7" GT1155-QSBD-C 分辩率:320X240 显示色彩:256色,4.5" GT1030-LBD-C 分辨率:288X96 显示色彩:单色显示(黑/白)三色LED:绿/橙/红) 4.5" GT1030-LBDW-C DC24V RS-422连接分辨率:288X96 显示色彩:单色显示(黑/白)三色LED:白8粉/红)4.5" GT1030-LBDW2-C DC24V RS-232连接分辨率:288X96 显示色彩:单色显示(黑/白)三色LED:白8粉/红)5.7" GT1055-QSBD-C 分辩率:320X240 显示色彩:256色5.7" GT1050-QBBD-C 分辩率:320X240 显示色彩:单色显示(白/蓝)3.7" GT1020-LBD-C GT1020-LBD2-C GT1020-LBL-C 分辩率:160X64 显示色彩:单色显示(黑/白) 三色LED:绿/橙/红)3.7" GT1020-LBDW-C GT1020-LBDW2-C GT1020-LBLW-C 分辩率:160X64 显示色彩:单色显示(黑/白)三色LED:白/粉/红4.7" GT1040-QBBD-C 分辩率:320X240 显示色彩:单色显示(白/蓝)GT15系列15" GT1595-XTBA GT1595-XTBD 分辩率:1024X768 显示色彩:6553612.1" GT1585V-STBA GT1585V-STBD 分辩率:800X600 显示色彩:65536 支持视频/RGB10.4" GT1575V-STBA GT1575V-STBD 分辩率:800X600 显示色彩:65536 支持视频/RGB10.4" GT1575-STBA GT1575-STBD 分辩率:800X600 显示色彩:65536GT1572-VNBA GT1572-VNBD GT1575-VNBA GT1575-VNBD GT1565-VTBA GT1565-VTBD GT1562-VNBA GT1562-VNBD15" GT1695M-XTBA GT1695M-XTBD12.1" GT1685-STBA GT1685M-STBD10.4" GT1675M-STBA GT1672-VNBA GT1675M-STBD GT1672-VNBDGT1675M-VTBA GT1675M-VTBD GT1675-VNBA GT1675-VNBDGT12系列GT1275-VNBA GT1275-VNBD GT1265-VNBA GT1265-VNBD。

16 9 规格标准
16:9 规格标准是指屏幕或显示器的宽高比，表示屏幕的宽度与高度之间的比例关系。

16:9 表示屏幕的宽度是高度的 16 倍，也可以理解为每 16 个单位的宽度对应 9 个单位的高度。

这个规格标准广泛应用于电视、计算机显示器和投影仪等设备中。

相比于传统的 4:3（即宽度与高度之比为 4:3）规格，16:9 规格更适合观看宽屏内容，如高清电影、游戏和多媒体演示等。

16:9 规格标准提供了更宽阔的视野和更大的显示区域，使用户能够享受到更逼真、更震撼的视觉体验。

许多新款电视和显示器都采用了这种宽屏比例，因为它能够更好地适应现代多媒体内容的播放和观看需求。

NK-N9H20User ManualThe information described in this document is the exclusive intellectual property ofNuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton. Nuvoton is providing this document only for reference purposes of NuMicro™ microcontroller based system design. Nuvoton assumes no responsibility for errors or omissions.All data and specifications are subject to change without notice.For additional information or questions, please contact: Nuvoton Technology Corporation.Oct. 02, 2019Table of Contents1Overview (3)2NuDesign HMI-N9H20 Board Introduction (4)2.1NuDesign HMI-N9H20 Jumper Description (8)2.2Pin Assignment for Extended Connectors (11)2.3NuDesign HMI-N9H20/TFT-LCD4.3/SPI2UART(B) PCB Placement (15)2.4NuDesign HMI-N9H20 N9H20K51N’s Control Pin Functions (20)2.5NuDesign HMI-N9H20 BOM (23)2.6NuDesign TFT-LCD4.3 BOM (26)2.7NuDesign SPI2UART(B) BOM (26)3NuDesign HMI-N9H20 Schematics (27)3.1NuDesign HMI-N9H20 Function Blocks Schematic (27)3.2NuDesign HMI-N9H20 N9H20K51N MPU Schematic (28)3.3NuDesign HMI-N9H20 Power Supply Schematic (29)3.4NuDesign HMI-N9H20 Keys and Configuration Schematic (29)3.5NuDesign HMI-N9H20 USB2.0 and SD0 Interface Schematic (30)3.6NuDesign HMI-N9H20 NAND and SPI Flash Memory Schematic (30)3.7NuDesign HMI-N9H20 Headphone Schematic (31)3.8NuDesign HMI-N9H20 JTAG and UART Schematic (32)3.9NuDesign HMI-N9H20 Audio Codec Controller Schematic (33)3.10NuDesign TFT-LCD4.3 LCD Controller Schematic (34)3.11NuDesign SPI2UART(B) Controller Schematic (35)4Revision History (36)Oct. 02, 20191 OverviewThe NK-N9H20 system includes boards NuDesign HMI-N9H20 and NuDesign TFT-LCD4.3 that is a general development board for N9H20K51N series by which users can develop and verify the application program easily. The NuDesign HMI-N9H20 includes Audio controller, USB 2.0 HS Device controller, SPI to UART controller, 24-bit LCD controller and integrated 32MB DDR2 memory, SRAM and external device with DMA request and ack.Oct. 02, 20192 NuDesign HMI-N9H20 Board IntroductionThe following figures show the NuDesign HMI-N9H20 development board, in which the front and back integrated 32-bit microcontroller embeds an outstanding CPU core ARM926EJ-S, runs up to 192MHz, with 16KB I-cache, 16 KB D-cache and MMU,32KB embedded SRAM and 12KB IBR(Internal Boot ROM) for booting from USB and SPI FLASH; Audio controller NAU8822A is a low power, high quality CODEC for portable and general purpose audio applications, it includes drivers for speaker, headphone, and differential or stereo line outputs, and integrates preamps for stereo differential microphones, significantly reducing external component requirements. The board also supports several extended connections. Users can use it to develop and verify applications to emulate the real behavior.Figure 2-1 NuDesign HMI-N9H20 PCB Board (Front)Figure 2-2 NuDesign HMI-N9H20 PCB Board (Back) Oct. 02, 2019Figure 2-3 NuDesign TFT-LCD4.3 PCB Board (Front) Oct. 02, 2019Figure 2-4 NuDesign TFT-LCD4.3 PCB Board (Back) Oct. 02, 2019Oct. 02, 2019 Figure 2-5 NuDesign SPI2UART(B) PCB Board (Front)2.1 NuDesign HMI-N9H20 Jumper Description2.1.1 Power Source●CON3: 5V DC Adaptor input connector.●CON4 & CON5: External Battery connector.●S3: Power ON/OFF Switch.Source Power port VIN VD33 CON3 Connect to 5V DC Adaptor 5V DC 3.3V S3 VD33 & VD18 Power Enable PWREN of U2 & U3 DC 3.3V Table 2-1 System Power ConnectorsOct. 02, 20192.1.2 LED Indicators2.1.3 Debug Connectors●CON11: Connector in target board NuDesign HMI-N9H20 (U1,●CN2: Connector in target board NuDesign SPI2UART(B) (U2, MINI58FDE)Oct. 02, 20192.1.4 USB Connectors●CON6: Mini USB Connector (USB 2.0 HS Device).2.1.5 Extended Connectors●CON1 and CON2: Show all extended pins in NuDesign HMI-N9H20.2.1.6 Buttons and JUMPER●K1~K6: Key pad button in NuDesign HMI-N9H20.●SW3: Reset button in NuDesign HMI-N9H20.●JP1: System configuration setting in NuDesign HMI-N9H20.2.1.7 Audio Connectors●CON9: Headphone Positive Output or Line Output Right and HeadphoneNegative Output or Line Output Left.Oct. 02, 20192.2 Pin Assignment for Extended ConnectorsThe NuDesign HMI-N9H20 provides the N9H20K5DN target chip functions on board and several extended connectors (NU1, NU2, NU3, NU4, NU5 and NU6) for user applications. The following table is the pin assignment for NuDesign HMI-N9H20.Oct. 02, 2019Oct. 02, 2019Oct. 02, 2019Oct. 02, 20192.3 NuDesign HMI-N9H20/TFT-LCD4.3/SPI2UART(B) PCB Placement The following figure shows the NuDesign each PCB placement.Figure 2-3 NuDesign HMI-N9H20 PCB Placement (Front) Oct. 02, 2019Figure 2-4 NuDesign HMI-N9H20 PCB Placement (Back) Oct. 02, 2019Figure 2-5 NuDesign TFT-LCD4.3 PCB Placement (Front) Oct. 02, 2019Figure 2-6 NuDesign TFT_LCD4.3 PCB Placement (Back) Oct. 02, 2019Oct. 02, 2019 Figure 2-7 NuDesign SPI2UART(B) PCB Placement (Front)2.4 NuDesign HMI-N9H20 N9H20K51N’s Control Pin FunctionsThe following table shows the NuDesign HMI-N9H20 Function Control Pins Assignment.Pin No. GPIO ADC AUDIO CMOS I2C I2S JTAG LCM-80 LCM NAND SD SPI SYSTEM UART USB3 GPB.0 SP_CLKO SD1_D1 UHL_DP14 GPB.14 SDA LMVSYNC5 GPB.13 SCL WDT_RSTn6 GPD.12 SPI0_CLK7 GPD.13 SPI0_CS0nOct. 02, 2019Oct. 02, 2019Table 2-13 N9H20K51N Pin Functions Assignment2.5 NuDesign HMI-N9H20 BOMOct. 02, 2019Oct. 02, 2019Oct. 02, 20192.6 NuDesign TFT-LCD4.3 BOM2.7 NuDesign SPI2UART(B) BOMOct. 02, 20193 NuDesign HMI-N9H20 Schematics3.1 NuDesign HMI-N9H20 Function Blocks SchematicOct. 02, 20193.2 NuDesign HMI-N9H20 N9H20K51N MPU SchematicOct. 02, 20193.3 NuDesign HMI-N9H20 Power Supply Schematic3.4 NuDesign HMI-N9H20 Keys and Configuration Schematic3.5 NuDesign HMI-N9H20 USB2.0 and SD0 Interface Schematic3.6 NuDesign HMI-N9H20 NAND and SPI Flash Memory SchematicOct. 02, 2019Oct. 02, 20193.7 NuDesign HMI-N9H20 Headphone SchematicOct. 02, 20193.8 NuDesign HMI-N9H20 JTAG and UART SchematicOct. 02, 20193.9 NuDesign HMI-N9H20 Audio Codec Controller SchematicOct. 02, 20193.10 NuDesign TFT-LCD4.3 LCD Controller SchematicOct. 02, 20193.11 NuDesign SPI2UART(B) Controller SchematicOct. 02, 2019 4 Revision HistoryImportant NoticeNuvoton Products are neither intended nor warranted for usage in systems or equipment, any malfunction or failure of which may cause loss of human life, bodily injury or severe property damage. Such applications are deemed, “Insecure Usage”.Insecure usage includes, but is not limited to: equipment for surgical implementation, atomic energy control instruments, airplane or spaceship instruments, the control or operation of dynamic, brake or safety systems designed for vehicular use, traffic signal instruments, all types of safety devices, and other applications intended to support or sustain life. All Insecure Usage shall be made at customer’s risk, and in the event that third parties lay claims to Nuvoton as a result of customer’s Insecure Usage, customer shall indemnify the damages and liabilities thus incurred by Nuvoton.。

新触摸屏面板调试步骤：1.将触摸屏面板切换至WINCE系统下，打开我的设备，打开RESIDENTFLASH盘中的GKB文件夹，将config.ini文件复制至我的设备中SDMMC盘。

2.连接数据线或将触摸屏面板中的miniSD卡取出用读卡器读取，在电脑上用记事本打开之前所复制出来的config.ini文件进行修改。

修改方法详见附件1。

3.将修改完成后的config.ini文件替换原先保存在GKB文件夹中的config.ini文件，推出wince系统。

进入GKB家居控制即可。

附件1：Config.ini文件修改方法：用记事本打开之后呈以下界面以上图为房间中单元码及单元码所对应设备名称的更改方法。

ROOm 所对应的是房间号machiine所对应的为房间中的设备号“R oomXmachineX=”此代码意思为X房间的第X个设备。

请不要随意更改，以免遥控器出现错误。

A为开关B为空调C为窗帘D为调光灯E为家电F为DVD此列字母后的数字为移动液晶面板单元码所对应的数字具体方法为：红色为单元码黑色为所对应号码因面板最大可支持112单元所以在字母之后的数字为三位数，不足三位请在数字前加0补足。

三位数字之后即为设备名称。

（友情提示：面板字符最大支持4字，4字以上自动换行，部分文字将被覆盖。

）“Syscodedata=“之后的数字为触摸屏面板的系统码，如触摸屏上无法更改，请更改此项。

注意如更改错误，将无法控制家中所对应GKB产品，请谨慎填写。

“GROUPA=“为模式的名称修改A为第一个模式B为第二个模式注意：如果编辑不正确将影响这个数码屋功能!。

目录一、希沃 (1)70寸技术参数 (1)图片示例 (2)二、TCL (3)70寸技术参数 (3)图片示例 (4)65寸技术参数 (5)三、上海广电光显 (6)技术参数 (6)四、长虹 (7)65寸技术参数 (7)五、鸿合科技 (8)70寸技术参数 (8)六、创维光电 (8)70寸技术参数 (9)图片示例 (10)84寸技术参数 (11)65寸技术参数 (12)七、上海仙视 (12)70寸技术参数 (12)图片示例 (14)84寸技术参数 (15)八、夏普 (16)70寸技术参数 (16)80寸技术参数 (17)图片示例 (19)九、创显光电 (19)70寸技术参数 (20)84寸技术参数 (21)图片示例 (22)十、深圳中银科技 (23)70寸技术参数 (23)一、希沃70寸技术参数图片示例70寸图片165寸图片2二、TCL70寸技术参数图片示例70寸图片365寸图片465寸技术参数三、上海广电光显技术参数四、长虹65寸技术参数五、鸿合科技70寸技术参数产品规格：70英寸型号：HD-I7002E背光类型：LED显示比例：16:9可视角度：178°物理解析度：1920*1080Pixel图像制式/声音制式：PAL/DK,I3D功能：——工作电压：AC 90-265V,50/60Hz触摸表面材质：钢化玻璃感应方式：红外感应触摸技术特性：HID免驱触摸点数：多点触控，多点书写书写方式：手指或书写笔触摸分辨率：32767*32767通讯接口： USB存储温度/湿度：-20℃~60℃,10%~90% 工作温度/湿度：5℃~50℃,10%~90% 安装方式：壁挂或移动整机尺寸：1648.9*975.6*112.9mm重量：70KG六、创维光电70寸技术参数图片示例70寸图片565寸图片6七、上海仙视70寸技术参数图片示例八、夏普 70寸技术参数 电力消耗（W ） 230W 待机消耗功率（W ） 0.50电源要求 交流110-240V ，50Hz 屏幕显示语言 英文/中文（简体）/俄语 扬声器 （150mm×34mm ）×2音频输出功率 10W×2（AV 输入，负载4欧姆，失真度为10%时） 电视调谐系统 自动预设99个频道视频彩色制式 PAL/SEAM/NTSC3.58/PAL60图像清晰度* RD 模拟信号：水平>=350，垂直>=400以上 SDTV ：水平>=450，垂直>=450以上 背光源 LED 重量kg 57.5KG 外型尺寸（cm ）宽×深×高 1.625 ×106 ×993mm液晶显示屏 X-GEN 面板分辨力1920（水平）×1080（垂直）下面-数字（天线输入）UHF/VHF 75q DIN 型插座下面-模拟（天线输UHF/VHF 75q DIN 型插座入）后面ー音频输入 HDMI2/电脑共用（直径3.5mm 插孔）RS-232C 9针D-sub 凸型插头电脑 15针小型D-sub,音频输入（与HDMI2共用）（直径3.5mm 插孔）后面—输入5 视频输入，音频输入后面—输入4色差输入（480I,576I,480P,576P,720P/50Hz,720P/60Hz, 1080I/50Hz,10080I/60Hz ），音频输入 后面-HDMI3HDMI(HDMI 输入)（480I,576I,480P,576P,720P/50Hz, 720P/60Hz,1080I50Hz,1080I/60Hz,1080P/50Hz, 1080P/60Hz,1080P/24Hz ）侧面-HDMI2HDMI(HDMI 输入)（480I,576I,480P,576P,720P/50Hz720P/60Hz,1080I/50Hz,1080I/60Hz,1080P/50Hz,1080P/60Hz1080P/24Hz)音频输入（与电脑输入公用）（直径3.5mm 插孔））侧面-HDMI 1（ARC ）HDMI(HDMI 输入)（480I,576I,480P,576P,720P/50Hz,720P/60Hz,1080I/50Hz,1080I/60Hz,1080P/50Hz,1080P/60Hz,1080P/24Hz ） 侧面-USB2（HDD ） USB2.0 前面 USB12.0侧面ー音频输出/耳机 直径3.5 插孔（音频输出）接收频道 VHF/UHF C1・C12・C13-C57 CATV SECAM/NTSC3.58/PAL60立体声/双语 丽音（NICAM ）B/G ，I ，D/K A2 立体声：B/G 接收频率 模拟ATV 44.25-863.25MHz 数字DTV 55.25-863.25MHz电视制式 PAL ：B/G,D/K ，I SECAM ：B/G,D/K,K/K1 NTSC ：M电源 由USB 提供操作系统 Win XP,Win CE,Vista,Win7,Linux,Mac,Android,Win8检测区域 153.9×86.6cmPC 连接器 USB （兼容1.1）书写方式 手指或非透明触控笔触摸定位精度 ± 2mm响应速度（单点连续） 4ms （典型值）触摸点数 6点检测方法 红外线阻隔检测方法80寸技术参数 基本规格电力消耗（W ） 260 待机消耗功率（W ） 0.50 能效指数（EEILCD ） 1.4分辨力1920（水平）×1080（垂直）外型尺寸（cm ）宽×深×高 187.6×11.6×113.3液晶显示屏X超晶面板端子DVI-D 端口 1音频输出端子（HP） 1光纤数字音频输出 1Y,Pb,Pr输入端子 1USB端口 2RS-232C端口 1PC输入 1LAN(网络) 无HDMI端口 3复合视频输入端子 2声音声音输出(w) 10W+10W智能光控(opc) 有立体环绕SRS TruSurround HD图片示例九、创显光电图片示例十、深圳中银科技70寸技术参数。

3c认证中0903适用范-回复什么是3C认证中的0903？以及该认证的适用范围。

首先，我们来了解一下什么是3C认证。

3C认证即中国强制性产品认证（China Compulsory Certification），全称“强制性产品认证制度”。

它是中国政府制定的一个强制性的产品质量和安全标准。

在中国市场销售的电子信息技术产品，必须经过3C认证后方可上市销售。

3C认证的涵盖范围广泛，包括电气设备、家用及类似用途电器、信息技术设备等。

接下来，我们来了解一下3C认证中的0903。

在3C认证体系中，不同的产品会被分成不同的大类，每个大类下又有多个小类。

0903是其中一个小类别，主要适用于通讯设备及终端设备。

具体来说，0903类别适用于与通信相关的设备和终端产品。

包括但不限于手机、固定电话、无绳电话、传真机、数据机、调制解调器、视频会议设备、卫星通信终端设备等。

通信设备和终端设备在现代社会中扮演着重要的角色，它们负责人们之间的信息传递和沟通。

因此，为确保这些设备的安全、质量和性能符合标准，以保障用户的利益和安全，中华人民共和国国家质量监督检验检疫总局（AQSIQ）设立了0903类别的3C认证。

为了获得0903认证，通信设备和终端设备必须满足一系列的技术规范和测试要求。

这些要求包括但不限于电磁兼容性测试、无线电频率测试、声压级测试、产品外观检验、安全性能测试等。

只有通过了这些测试，设备才能获得3C标志，证明其符合中国国家标准和法规的要求。

获得0903认证对于通信设备和终端设备制造商和供应商来说非常重要。

首先，经过3C认证的设备会更具市场竞争力，因为消费者更倾向于购买符合标准的产品。

其次，3C认证还可以提高设备的质量和安全标准，降低产品故障率，为用户提供更好的使用体验。

最后，符合标准的认证产品还可以避免不必要的法律责任和风险。

总结起来，3C认证中的0903类别主要适用于通信设备和终端设备，涵盖手机、固定电话、无绳电话、传真机、数据机、调制解调器、视频会议设备、卫星通信终端设备等产品。

一、产品概述本销售合同所涉及的产品为COMT336系列智能终端设备（以下简称“产品”）。

该产品由我国知名高新技术企业研发生产，具有高性能、高稳定性、易用性等特点，广泛应用于家庭、企业、政府等各个领域。

二、产品型号及配置1. COMT336A型- 主处理器：高性能八核处理器，主频高达2.0GHz- 内存：4GB DDR4- 存储：64GB eMMC- 屏幕尺寸：5.5英寸，1920×1080分辨率- 摄像头：后置1300万像素，前置500万像素- 电池：3000mAh，支持快充- 网络制式：支持4G全网通- 通信接口：USB Type-C、耳机接口、Micro-SD卡槽- 操作系统：Android 10.02. COMT336B型- 主处理器：高性能八核处理器，主频高达2.2GHz- 内存：6GB DDR4- 存储：128GB eMMC- 屏幕尺寸：6.5英寸，2400×1080分辨率- 摄像头：后置1600万像素，前置800万像素- 电池：4000mAh，支持快充- 网络制式：支持5G全网通- 通信接口：USB Type-C、耳机接口、Micro-SD卡槽- 操作系统：Android 11.0三、产品功能1. 高性能处理器：COMT336系列产品采用高性能处理器，确保系统运行流畅，满足用户在办公、娱乐、学习等场景下的需求。

2. 大容量存储：提供多种存储配置，满足用户对存储空间的不同需求。

3. 高清屏幕：采用高清屏幕，提供优质的视觉体验。

4. 高性能摄像头：后置高清摄像头，支持多种拍摄模式，满足用户拍照需求。

5. 快充技术：支持快充技术，充电速度快，节省用户时间。

6. 全网通网络制式：支持4G/5G全网通，满足用户在不同网络环境下的需求。

7. 丰富接口：提供USB Type-C、耳机接口、Micro-SD卡槽等接口，方便用户连接各种设备。

8. 智能操作系统：搭载Android操作系统，提供丰富的应用市场，满足用户个性化需求。