下载文档原格式
ContentsIntended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Warnings and Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Qualified Provider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Specifications and Preparations Before Use(Risk Management for Installation and Calibration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Disposal / Waste Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 User Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Serious Incidents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7To see other language options, visit .2Intended UseThe 555 prosthetic terminal device family, commonly referred to as “lyre-shapedsplit hook,” is used to provide for both fine prehension and cylindrical grasp oflarger objects when controlled through a cable that is operated with body motions. These hooks have a nitrile coating on the grasping surface of the hook fingers for compliance and to prevent damage to items that may be being handled. The hooks are a voluntary-opening device and grasping tension is adjusted by the adding of tension bands, rings, or springs (see catalog for additional information). They are available in stainless steel (555-SS) or aluminum (555).Performance CharacteristicsFingers Lyre-Shaped Lyre-ShapedGrip Nitrile Coating Nitrile CoatingProximal Connector½-20 Thread½-20 ThreadLength 5.25 in. (13.3 cm) 5.25 in. (13.3 cm)Weight 4.5 oz. (121 g)8.5 oz. (241 g)Material Aluminum Stainless SteelThese devices are intended for single patient use only.Storage and HandlingIt is recommended that prosthetic hooks (or prosthetic/orthotic components) be stored in a cool, clean, dry environment away from harsh chemicals (chlorine, acids, acetone, etc.).Warnings and PrecautionsCAUTION: Nitrile coatings are not intended for use in high temperatureapplications. Refrain from contact with items that are above 85 °C (185 °F)as damage to the coating may occur.CAUTION: Aluminum prosthetic hooks are not intended to support partialor full body weight. For heavy duty applications, steel or titanium hooksare recommended .3NOTICE: An upper-limb prosthetic device user’s ability to drive shouldbe determined on a case-by-case basis by a specialist. Contact your localgoverning authorities regarding any driving restrictions or limitations.WARNING: Body-powered devices should not rely on cable tension forgrasp control if the user has been cleared to drive with the prosthesis.Failure to maintain tension while controlling the steering wheel couldcause serious injury or death.CAUTION: Abnormal or improper environmental conditions will leadto malfunctioning and damage of the prosthesis and are not coveredunder the warranty of the device. This prosthetic component must notbe subjected to dust/debris, liquids other than fresh water, abrasives,vibration, activities which would damage the biological limb, or prolongedextreme temperatures (< -5 °C or > 50 °C). Do not allow debris or liquids toremain in the prosthesis and its components during use. Rinse the devicewith fresh water and dry immediately after exposure.CAUTION: The hook is waterproof to 1 meter. However, if the hook issubmerged, it should be rinsed with fresh water and dried immediately toremove salt, chlorine, or debris.Qualified ProviderAttachment, adjustment, alignment, and delivery of this device must be performed by or under the direct supervision of a qualified prosthetist. Unless stated in this manual, any such activities should not be attempted by the user and will potentially void the device warranty.Specifications and Preparations Before Use (Risk Management for Installationand Calibration)InstallationThe hook may be installed in any Fillauer wrist unit with a ½-20 thread. Follow the instructions provided with the wrist unit for best results.4CablingThe hook “thumb” has been designed with a receiver for a ⁹⁄³² inch ball terminal. A triple swivel with ⁹⁄³² inch ball terminal should be selected with a cable connection that matches the cable used in the prosthesis. Cable routing should ensure a direct line of pull that minimizes bends in the cable, otherwise excess cable friction or failure could result .Adding Tension to Hook GraspTo add more force to the grasp of the hook, additional tension bands may be applied using the E-Z Hook Tension Band Applier (55144) or similar device. Additional bands are included with the hook and are available in beige (53869) or black (53869-BLK). For greater tension, hook rings (57500) or stainless-steel tension springs (55363) may be used. Tension springs are recommended for situations where chemical or heat exposure could cause band or ring failure.CompatibilityFillauer hooks have been tested with and are recommended for use with Fillauer wrists that have a ½-20 internal thread. They may be used with any equivalent ½-20 threaded wrist units. However, damage caused by other manufacturers wrist units is not covered under warranty of this device.Only Fillauer tension bands, hook rings, and tension springs may be used with Fillauer hooks to adjust the grasping force of the hook.Disposal / Waste HandlingThe product must be disposed of in accordance with applicable local laws and regulations. If the product has been exposed to bacteria or other infectious agents,it must be disposed of in accordance with applicable laws and regulations for the handling of contaminated material.All metal components may be removed and recycled at the appropriate recycling facility.5User InstructionsThe providing health care professional must review the following information directly with the user.Care and MaintenanceCAUTION: Nitrile coatings are not intended for use in high-temperatureapplications. Refrain from contact with items that are above 85 °C (185 °F)as damage to the coating may occur.NOTICE: Nitrile coatings are expected to wear under normal use. Thecoating can be replaced but is not covered under warranty, except formanufacturer defect.CAUTION: Aluminum prosthetic hooks are not intended to support partialor full body weight. For heavy duty applications, steel or titanium hooksare recommended .NOTICE: An upper-limb prosthetic device user’s ability to drive shouldbe determined on a case-by-case basis by a specialist. Contact your localgoverning authorities regarding any driving restrictions or limitations.WARNING: Body-powered devices should not rely on cable tension forgrasp control if the user has been cleared to drive with the prosthesis.Failure to maintain tension while controlling the steering wheel couldcause serious injury or death.CAUTION: Abnormal or improper environmental conditions will leadto malfunctioning and damage of the prosthesis and are not coveredunder the warranty of the device. This prosthetic component must notbe subjected to dust/debris, liquids other than fresh water, abrasives,vibration, activities which would damage the biological limb, or prolongedextreme temperatures (< -5 °C or > 50 °C). Do not allow debris or liquids toremain in the prosthesis and its components during use. Rinse the devicewith fresh water and dry immediately after exposure.CAUTION: The hook is waterproof to 1 meter. However, if the hook issubmerged, it should be rinsed with fresh water and dried immediately toremove salt, chlorine, or debris.6Serious IncidentsIn the unlikely event of a serious incident, seek immediate medical help and contact your prosthetist at your earliest possible convenience. Clinicians should contact their local Fillauer representative immediately in the event of any device failure. WarrantyThis product has an 18-month warranty against manufacturer defects.7 Fillauer LLC2710 Amnicola Highway Chattanooga, TN 37406 423.624.0946Fillauer EuropeKung Hans väg 2192 68 Sollentuna, Sweden +46 (0)8 505 332 00© 2021 Fillauer LLCM090/10-07-21/Rev.1。
Cat. No.Product DescriptionSHH0001-500ML Novec™ 7000 Engineered Fluid SHH0001-1L Novec™ 7000 Engineered Fluid SHH0002-500ML Novec™ 7100 Engineered Fluid SHH0002-1L Novec™ 7100 Engineered Fluid A5597-1GAL Xylene SubstituteA5472-1GAL Formalin Free Tissue Fixative H2779-1L HistoChoice® Clearing AgentH2904-100ML HistoChoice® Tissue FixativeH2904-1L HistoChoice® Tissue Fixative Xylene SubstituteRené J Buesa and Maxim V PeshkovAnnals of Diagnostic Pathology, 13(4), 246-256 (2009) After the hazardous effects of xylene became indisputable in the 1970s, many potential substitutes became available, some with as many if not more hazards. This article discusses the inadequacy of 5 vegetable oils as substitutes, as well as the characteristics of 22 D-limonene-based substitutes, all less effective in their chemical role, some capable of inducing health problems, and costing more than twice as much as xylene. Some of the 35 alkane-based substitutes discussed are effective for tissue processing, less toxic, with a cost about the same as xylene, but are not very effective for dewaxing and other staining tasks. Isopropanol (2-propanol) alone or mixed with molten paraffin is a technically acceptable and cost-effective substitute for xylene for tissue processing, but in this study, we demonstrate that the best clearing agents from the sectioning quality and diagnostic value point of view, with automated or manual protocols, are mixturesof 5:1 and 2:1 isopropanol and mineral oil, followed by undiluted mineral oil, all at 50 degrees C, making thema safer and cheaper substitute than xylene. Using a1.7% dishwasher soap aqueous solution at 90 degreesC to dewax before staining and oven drying the stained sections before coverslipping will eliminate xylene from the staining tasks. Tissue processors retorts and conduits can be dewaxed with a 2% solution of a strong glassware laboratory detergent. These 4 methodologies will make the histology laboratory xylene-free but, due to the natural resistance to change, many histotechs will be reluctantto adopt them if they think that their technical expertise could be jeopardized, and the only way these changes will succeed is if the pathologists, as stewards of the histologylaboratory, commit to their implementation.Go Greener Histology & HematologySigma-Aldrich® is Committed to Bringing Safer Greener Alternatives to Our Customers.• Novec fluids are non-flammable, low toxicity fluidsfor freezing histology samples.• Xylene Substitute is non-toxic version of xylenewhich is compatible with all tissue• Formalin Free Tissue Fixatives is a less toxicalternative to formalin. It is also compatible witha number of applications like PCR, IHC and in-situhybridization• HistoChoice® Clearing Agent is suitable as analternative to toluene and xylene for dewaxing paraffintissue sections• HistoChoice Tissue Fixative is designed for molecularbiology and used for in-situ hybridizationThe life science business of Merck operates asMilliporeSigma in the U.S. and Canada.Formalin Free Tissue FixativesM E Boon and L P KokBiotechnic and Histochemistry, 83(6), 261-277 (2008)The German, F. Blum, introduced formalin as a fixative in 1893. Formalin rapidly became popular for hardening and preserving gross human and animal specimens. As a result, microscopy for diagnostic pathology by combining paraffin embedding and formalin fixation was developed. Alcohol-based fixatives have coagulation of proteins as their main preservative effect. Because there is no cross-linking, immunostaining is not compromised, and DNA and RNA is not damaged. Ethyl alcohol was used by Dutch scientists of the 18th century, but was replaced by the cheaper formalin. Addition of low molecular weight polyethylene glycol (PEG) optimized the coagulant fixative, Kryofix. The polyethylene glycol prevents excessive hardening and enhances the speed of coagulation of proteins. Kryofix was used on a large scale for skin biopsies in Leiden between 1987 and 2001. DNA preservation by the formulated coagulant fixative, BoonFix, is related to the concentration of ethyl alcohol, PEG and acetic acid. BoonFix has been used since 2004 in Leiden for over 40,000 diagnostic skin biopsies and more than 100,000 cervical samples.A literature review and three decades of experience with coagulant, formalin-free fixatives in pathology suggest that when health authorities realizethat formalin invalidates expensive tests, it might eventually be eliminated legislatively from diagnostic pathology. Finally, coagulant fixation is optimal for microwave histoprocessing where ethyl alcohol is followed by isopropanol. HistoChoice® Clearing Agent1. I mmunogenicity and contraceptive potential of three infertility-relevant zona pellucida 2 epitopes in the marsupial brushtail possum (Trichosurus vulpecula).Janine A Duckworth et. alReproduction, 133 (1), 177-186 (2007)In a previous study, three infertility-relevant epitopes of possum ZP2 (Pep12 (amino acids 111-125), Pep31 (amino acids 301-315), and Pep44 (amino acids 431-445)) were identified using sera from possums (Trichosurus vulpecula) immunized with recombinant possum zona pellucida 2 (ZP2) constructs, and a synthetic peptide library of possum ZP2 protein. In this study, the three peptides were conjugated to keyhole limpet hemocyanin and 300 mug of each conjugated peptide were administered subcutaneously to female possums (n = 20 per peptide) in complete Freund's adjuvant. Immunogen doses were repeated 3 and 6 weeks later using incomplete Freund's adjuvant. Control animals were immunized with either phosphate-buffered saline only (n = 10) or 300 mug keyhole limpet hemocyanin (n= 10), administered with the same adjuvants. Serum antibodies from animals immunized against these three epitopes bound to the corresponding possum ZP2 peptides, recombinant possum ZP2 protein constructs, and native zona. Possum fertility was assessed following superovulation and artificial insemination. Peptides Pep12 and Pep31 had no significant effects on fertility parameters (P > 0.05). However, animals immunized with Pep44 had lower egg fertilization rates (immunized 19.5% versus control 60.5%,P < 0.05) and produced significantly fewer embryos than control animals (immunized 0.5 embryos versus control 2.4 embryos, P < 0.05). The number of Pep44-immunized females that produced embryos was reduced by 64%. Identification and characterization of possum infertility-relevant epitopes on possum ZP2 protein will assist development of safe, humane, and possum-specific immunocontraceptive vaccines for controlling the introduced possums in New Zealand.2. A simplified method for combined immunohistochemistry andin-situ hybridization in fresh-frozen, cryocut mouse brain sections. Sathyanesan Samuel Newton et. alBrain Research Protocols, 9 (3), 214-219 (2002)A method is described to perform combined immunohistochemistry and in situ hybridization in mouse brain sections. The protocol is specific to sections mounted on glass slides. In contrast to earlier methods that require either paraffin embedding or perfusion ofthe brain with paraformaldehyde, this protocol can be carriedout on fresh-frozen, cryostat cut post-fixed sections. This simple and concise protocol increases the applicability of the techniqueas the RNAse-free immunodetection of antigen is useful by itself for immunologically identifying specific cells of interest and then examining gene expression in those cells using techniques such as real-time PCR and microarray analysis. The use of fresh-frozen, cryocut sections enables reliable detection of easily perturbable post-translational modifications such as phosphorylation and improves the quality of results obtained in subsequent in situ hybridization by reducing the background signal and interference from lower cell layers. Inducible transgenic mice that express either a dominant negative mutant form of the cAMP response element binding protein (mCREB) or CREB, in discrete brain regions, were used in this study. The combined immunohistochemistry and in situ hybridization protocol was used to examine colocalization of enkephalin or dynorphin mRNA, both downstream targets of CREB-mediated gene expression, in cells expressing transgenic mCREB or CREB. HistoChoice Tissue FixativeJ Melrose et. alBiotechnic and Histochemistry, 83(1), 47-53 (2008) Histochoice is a proprietary nontoxic, non-cross-linking fixative designedby the manufacturer to replace formaldehyde based fixation protocols. We compared Histochoice and formalin fixation for several cartilaginous tissues including, articular and growth plate cartilage, meniscus and intervertebral disc. The tissues were stained with general histology stains including toluidine blue for tissue proteoglycans, picrosirius red to evaluate collagenous organization, and hematoxylin and eosin to assess cell morphology. The chondroitin sulfate and heparin sulfate substituted proteoglycans aggrecan and perlecan were also immunolocalized in some of the tissues to provide a comparison. Histochoice did not fix deep into the tissue blocks resulting in focal loss of aggrecan and other matrix components from the more central regions of the blocks. This was evident in toluidine blue stained sectionsof immature tibial articular cartilage where loss of glycosaminoglycan was significant in Histochoice fixed tissues. Histochoice fixation worked well, however, in the aggrecan and perlecan immunohistology applications where its non-cross-linking traits were conducive to epitope retrieval and identification by primary antibodies to extracellular matrix components.To place an order or receive technical assistance Order/Customer Service: /orderTechnical Service: /techserviceSafety-related Information: /safetycenter Copyright © 2017 Merck KGaA. All Rights Reserved. Merck and the Vibrant M are trademarks of Merck. HistoChoice is a registered trademark and Sigma-Aldrich is a trademark of Sigma-Aldrich Co. LLC. or its affiliates.Lit. No. sh8707 2017 - 0672309/2017。
3M Advanced Materials DivisionIntroductionThe demand for maximum powerdensity, i.e. the transmission of greater force and torque in increasingly compact designs, poses a major challenge to engineers across a variety of industries. 3M Technical Ceramics manufactures friction-enhancing solutions for joining components to withstand highershear forces or transmit higher torque in bolt connections. 3M ™ Friction Shims offer a simple and cost-effective way to reliably transmit up to 4x higher torques or forces thanconventional systems without requiring modifications to the joint design.3M friction shims are metal foils with a coating of electroless nickel embedded with diamond particles. The diamonds indent into the metal mating surface and create a micro-scale interlock. The shims themselves are easy to assemble and can bereused after disassembly. 3M friction shims are thin enough to fit within close engineering tolerances, creating possibilities for lightweight compact design while increasing maximum load and peak torque in bolt connections.3M friction shims have proveneffective in a wide variety of industries, including general mechanicalengineering, machine tools, marine engineering, wind and water power generators, turbines, automotive engineering and motor sports. Our technical specialists have many years of application experience, and conduct in-house laboratory and bench tests to ensure that 3M friction shims meet our customers’ specific requirements.Features• I ncreases the coefficient of static friction• F unction of 3M friction shims is not affected by an oil film • Can be easily retrofitted • Prevents fretting • Highly reproducible • C olor option for distinctive appearance• S him geometries can be tailored to customer specificationApplication• Frictional joints • Flange joints• Joints with central bolt • Bolt connections • Fastener systemsApplication NotesWhen 3M friction shims are used please note:• F or maximum performance, the mating surfaces must have roughness values Rz as given in the technical data sheet.• C ontact pressure of at least 50 MPa is recommended.• W hen designing the joint,ensure that the counterparts to be joined are in full contact.• O nly use in applications with static friction in the contact area.• T he coefficient of static friction depends on a large number ofdifferent parameters. It is therefore always advisable to carry out application tests with assistance from 3M Technical Ceramics.• 3M Technical Ceramics offers support in defining a suitable assembly concept.3M ™Friction Shims3M ™ Friction Shims and SEM microphotoof nickel-diamond coatingHandling Instructions• S tore 3M™ Friction Shims onlyin original packaging.• D on’t handle 3M friction shimsas bulk unless a clip variant isused that has been specifically designed for bulk storage.• D on’t expose 3M friction shimsto temperatures above 400°C.• D ry storage recommended.• D on’t bend 3M friction shims.• N o mechanical treatmentof 3M friction shims.• B efore assembling 3M friction shims, make sure no dirt residue is present.• C heck correct quantityduring assembly.• A void relative movementof shims on surface.Matrix3M™ Friction Shim Diagram Typical Coefficient of Friction (Not for specification purposes)Figure 2. Results of a series of tests onthe coefficient of static friction with and without 3M™ Friction Shims. The shadedareas of the bar show the variation.Figure 1. Tribosystem with 3M friction shim. (This figure is intended as a guide. On request, we can provide you with a drawing frame for your specification.)0.10.20.30.40.50.60.70.8 0.03M is a trademark of 3M Company. Used under license by 3M subsidiaries and affiliates.Please recycle. Printed in USA © 3M 2018. All rights reserved. Issued: 7/18 14365HB 98-0050-0042-1 Rev. F3M Technical CeramicsZweigniederlassung der 3M Deutschland GmbH Max-Schaidhauf-Str. 25, 87437 Kempten, Germany Phone +49 (0)831 5618-0Web www.3M.de/Technical-CeramicsWarranty, Limited Remedy, and Disclaimer: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. User is solely responsible for evaluating third party intellectual property rights and for ensuring that user’s use of 3M product does not violate any third party intellectual property rights. Unless a different warranty is specifically stated in the applicable product literature or packaging insert, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OF NON-INFRINGEMENT OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damages arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.Technical Information: Technical information, recommendations, and other statements contained in this document or provided by 3M personnel are based on tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Such information is intended for persons with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.3M Advanced Materials Division 3M CenterSt. Paul, MN 55144 USAP hone 1-800-367-8905Web /frictionshims。
《食品微生物检验技术》课程实训指导手册项目九方便面菌落总数快速检验-3M试纸片（依据SN/T 0168-2015进出口食品中菌落总数计数方法与3M试纸片操作说明书）一、实训目的以3M试纸片进行样品中菌落总数计数，熟练使用各类3M试纸片进行检验操作，明确常用微生物快速检验方法的原理与优缺点与注意事项。
二、实训原理Petrifilm TM是3M公司专利发明，将传统的琼脂平板或试管的培养方法浓缩在小小的一张测试片上，现阶段共有十余种测试片，比较常用的有：菌落总数测试片、大肠菌群计数测试片、快速大肠菌群计数测试片、高灵敏度大肠菌群计数测试片、大肠杆菌/大肠菌群计数测试片、肠杆菌科测试片、霉菌和酵母菌计数测试片、快速金黄色葡萄球菌计数测试片、环境李斯特菌测试片三、实训要求本项目3M试纸片进行样品中菌落总数计数快速检验依据SN/T 0168-2015进出口食品中菌落总数计数方法与3M试纸片说明书进行检验操作，标准与操作说明书规定了3M试纸片进行样品中菌落总数计数快速检验的基本要求、操作程序和结果判定。
本项目全面考察学生依据标准与操作说明进行微生物快速检验的能力。
本项目实施过程可分为样品准备、接种、培养、计数4个步骤。
本项目按2人/组为单位进行操作，要求在实验室完整使用3M试纸片进行样品中菌落总数计数快速检验。
四、实验材料和设备1试剂和溶液无菌生理盐水、75%乙醇。
2 仪器和设备除微生物实验室常规灭菌及培养设备外，其他设备和材料包括冰箱、天平、剪刀、镊子、移液管、锥形瓶、试管、恒温培养箱、均质器及耗材、达到精度要求的pH计，超净工作台或百级洁净实验室。
五、实训任务（包含结果计算）1、样品制备以无菌操作取有代表性的样品盛于灭菌容器内。
如有包装，用75%乙醇在包装开口处擦拭后取样。
a）固体和半固体样品：无菌操作，称取25 g样品置盛225 mL生理盐水的无菌均质杯内，8000 r/min～10000 r/min均质1 min～2 min，或放入盛有225 mL 稀释液的无菌均质袋中，用拍击式均质器拍打1 min～2 min，制成1:10 的样品匀液。
#3MScienceOfSafetyFall Protection for Tools Awareness Resources.Any tool, Pocket Reference GuideFall Protection for Tools Pocket Reference Guideincluded reference guide.Hard Hat StickersMake safety awareness efforts stick with these Stop the Drop hard hat stickers.Looping Awareness VideosGet immediate access to high definition videos that can be used in training and awareness materials at your work location.http://bit.ly/2C9vsqY150000315000451500045150000315000051500007 15000011500003DescriptionLoad rating 1500003D-ring 0.5" x 2.25"0.9 kg (2 lbs)1500005D-ring 0.5" x 2.25" non-conductive 0.9 kg (2 lbs)3M ™ DBI-SALA ® D-ringshttp://bit.ly/2C9vsqY•D -rings can be attached to virtually any tool under 2.3 kg (5 lbs) or0.9 kg (2 lbs) using our Quick-Wrap Tape (see page 5).•C reates an attachment point in less than a minute.•D ual D-rings allow for 100% tool tie-off during tool transfers.500 800 999 55500 | /FallProtection150016815001741500171Quick-Wrap Tape IIhttp://bit.ly/2C9vsqY •L onger 3 year shelf life.•H eavy duty 2.54 cm (1") wide tape with high-elongation properties resulting in more wraps with the same length of tape.•U sed with our D-rings (see page 4) and Tool Cinch Attachments (see page 6) to create instant tethering points on virtually any tool.•C onforms to shape of tool handles, adheres on contract to most clean tools and can be repositioned during installation.•P roprietary 3M material and adhesive provide good tear resistance.1500012150001415000151500018150001415000151500045150004515000186#3MScienceOfSafety |00 800 999 555003M ™ DBI-SALA ®Tool Cinch Attachmentshttp://bit.ly/2C9vsqY•T ool Cinch Attachments feature a cinch design that allows users to quickly secure equipment up to 15.9 kg (35 lbs) or 36.3 kg (80 lbs.).•S tabilisation wings can be used to keep Tool Cinch Attachments in place using our Quick-Wrap Tape (see page 5).•V isit our website to see real-world examples of our Tool Cinch Attachments in use.Patent pending Patent pendingPatent pending Patent pending700 800 999 55500 | /FallProtection Heat Shrinkhttp://bit.ly/2C9vsqYD-ring Cordhttp://bit.ly/2C9vsqY•E asily cinches to tools weighing up to 2.3 kg (5 lbs).•S imply pass the loop end of a D-ring Cord through a pre-drilled hole or closed handle to create an attachment point.•E xtremely durable and reusable.•P rotect your investment and connection point! Heat Shrink protects our Quick-Wrap Tape (see page 5) from abrasives and harsh work environments.•Heat Shrink links reduce in size by 200% when heat is applied.Patentpending150003015000288#3MScienceOfSafety | 00 800 999 555003M ™ DBI-SALA ® Quick Spinshttp://bit.ly/2C9vsqY• S imply slides onto the handle of a tool in seconds.• S wivel spin top makes them tangle resistant.•R eusable and suitable for non-conductive use.PatentedMicro D-ring Cordhttp://bit.ly/2C9vsqY•D esigned to allow for easy tethering of small devices such as cell phones, cameras and radios.• A dheres to most surfaces creating an attachment point in seconds.• L oad rated for 0.9 kg (2 lbs) when used with 1500060.•U ses 3M very high bond adhesive.150002615000251500024900 800 999 55500 | /FallProtection Quick Ringshttp://bit.ly/2C9vsqYHarness Adapter•Q uick Rings are an economical solution for tethering tools quickly.•A llow many tools up to 0.9 kg (2 lbs) to be made tether-ready.•R ing pliers can be used to simplify quick ring installation.• P rovides an attachment point for tools on harness webbing • F ast and easy installation—anywhere on your harness webbing •A brasion-resistant and durable •C an be used on products with black & gold carabiner 1500161Tool Lanyards 3M™ DBI-SALA® Bungee Tethers15000471500049Competitor non-locking carabiners35.6 cm (14"))1500059Clip2Clip Coil Tether• N on-conductive.•I deal for use from Wristband.Coil TethersAn industry-first innovation.Easy to clean and out of the way-exactly what a tether should be. The lightweight vinyl construction and ultra-compact design of our Coil Tethers makes them an ideal alternative to classic bungee tethers. Since we first introduced them to the marketplace, we’ve continued to refine and improve our line of coil lanyards with feedback from actual workers in the field.1500060Clip2Loop Coil Tether•S ecure cameras, cell phones, radios and other small objects.•W orks well with our Micro D-ring.1500068Trigger2Trigger Coil Tether•I deal for use from Wristband.1500160Hook2Hook Coil Tether with Swivel1500066Hook2QuickRing Coil Tether with Tail•U se with hammers and other long-handled tools.•A vailable as a combo with our Hammer Holster.1500178Hard Hat TetherTool Lanyards10.2 cm AB A4.4 cm (1.75")7.6 cm (3")4.4 cm (1.75")A17.8 cm (7")3M ™ DBI-SALA ® Retractor3M ™ DBI-SALA ® Retractor• H igh-strength Dyneema ® retractor line Secure tools up to 2,5 kg (5 lbs).• L ine stays taut while reaching, retracts when not in use.• H ousing connection point swivels with workers motions.•P revent accidental disconnections or carabiner rollout with dual-action self-locking carabiners on each end.•C ompatible with a number of our Tool Holsters (see page 14), Wristbands (see page 26), and Tool Pouches (see page 20).•I nner 132 cm (52") steel coil allows automatic retraction when not in use.Trigger2Trigger LanyardsTop to bottom:1500058, 1500056, 1500054•T humb-controlled trigger snaps on both sides of these lanyards are easy to operate, even while wearing gloves.•Trigger snaps swivel, making them tangle-resistant.15001561500069Heavy-Duty Hook2Loop Lanyard•F eatures an aluminium double-action twist-lock carabiner to prevent accidental opens.•W orks well with heavy-duty tool cinch (see page 6).Heavy-Duty Hook2Rail Lanyard•F eatures an aluminium double-action twist-lock carabiner to prevent accidental opens.• L arge double-action twist-lock rail carabiner.•W orks well with heavy-duty tool cinch (see page 6).Beacon high-visibility ReflectorsProducts equipped with our high-visibility reflectors are always easy to identifyand locate, even when left in dark spaces. The highly reflective material stitched into the front and back of the holster makes it easily detectable with a flashlight even in low-light conditions.The faster, smarter way to holsterOur Quick-Mag Technology speeds up your workflow and reduces how often your tools need to be holstered. This powerful magnetic tool staging system allows tools to simply stick to the holster, ensuring the tool you need is always at the ready.Bottom drain ventYou’re at your best when your tools are too. The integrated drain vent in our Smart Holsters protects your tools from rusting and your holster from dry rot. Even in rainy weather conditions, the drain vent helps keep the holster dry by allowing water to pass through at all times.3M ™ DBI-SALA ® Smart HolstersYour tools, at the ready.Safer. Easier. It’s not often that your job can be both, but 3M DBI-SALA Smart Holsters are engineered for exactly that. These next generation tool pouches feature intelligent productivity features that are designed to keep your tool right where you want it at all times.15001051500107150010915001021500104Patent pending Patent pending Patent pending Patent pending Patent pendingSingle and Dual Tool Holsters[1] Hook2Loop Bungee Tether sold separately.• S ingle and Dual Tool Holsters are equipped with D-rings that are load rated for 2.3 kg (5 lbs).•S everal variants of these holsters come with Retractors (indicated below) (see page 12). Retractors are load rated for 0.7 kg (1.5 lbs).•S ingle and dual tool holsters feature Beacon High-Visibility Reflectors and the Quick-Mag Magnetic Tool Staging System.•A bottom drain vent allows the holster to perform even in wet conditions.150009915000961500097Back of holster features pouch for SafetyRetractor (see page 12). Rear feed system allows retractor to tie off a scaffold wrench while staying out of the way.•T he tape measure sleeve conforms to the size of nearly every tape measure.• F eatures Beacon ™ High-Visibility Reflectors.Patent pendingDescription1500095Pouch Holster with RetractorPouch Holster with Retractor• H olster for tape measures and other small tools.•I ncludes a retractor (see page 12).Patent pendingScaffold Wrench Holster with Retractor•Q uickly holster scaffold wrenches while working at height.•F eatures Beacon High-Visibility Reflectors.Patent pendingHammer Holster•T he Hammer Holster allows for the safe holstering of virtually any hammer under 2.3 kg (5 lbs).•D -ring on the side of the holster is load rated for 2.3 kg (5 lbs).•T he 1500094 combo comes with a 1500066 Hook2Quick Ring Coil Tether (see page 11) that is specially designed for use with the Hammer Patent pendingPatent pending15000601500088Can be worn from a belt or harness.3M™ DBI-SALA®Battery Holster/Sleeve• U nique sleeve design conforms to the size of virtually any drill battery.• S leeve is cinched to the drill, allowing the drill to be tethered off while being used at height.Comfort Tool Belt• E xtra padding provides superior comfort compared to many other tool belts.15001191500122150012015001211500123Patented3M ™ DBI-SALA ®Small Parts Pouches•I nnovative self-closure system traps objects inside, making it nearly impossible for objects to fall out once placed in the bag.• E asy to retrieve objects since no opening or closing is necessary.•C ompatible with most tool belts.Tool PouchesThe Small Parts Pouch is designed for small parts such as nuts, bolts, screws and nails.Even when the pouch is flippedvertically, the pouch traps objects inside, making it nearly impossible Belt loops located on back of pouch.Utility Pouch• F eatures two outside pockets for storing spud wrenches and two innerpockets for storing additional tools.• T ools can be tethered to D-rings on the inside and outside of the pouch.• A djustable side-release closure system helps prevent objects fromfalling out when the pouch isn’t being used.Hands-free workstationfrom belt or shoulder.ultiple inner pockets accommodate a number of tools while an integrated D-ring makeshe standard pouch uses a hook and loop closure system that can be locked open during use.he extra-deep Tool Pouch features a magnetic closure system as well as a side-release buckle.1500134150014022#3MScienceOfSafety | 00 800 999 555003M ™ DBI-SALA ® Safe BucketsWith an integrated closure system that helps prevent dropped objects, our Safe Buckets are designed to be the perfect companion for workers at height carrying heavy loads.Closure systemsEvery Safe Bucket features either a unique, patent-pending drawstring or a locking hook and loop closure system that acts as an extra layer of spill-protection during transport and lifting. Colourful indicator tabs provide quick visual cues to indicate whether the bucket is in lockdown mode or easy-access mode.Built-in connection pointsThe Safe Bucket was engineered for use with tools at height, and includes multiple connection points for tethering.High-quality canvas and vinylSafe Buckets are available in both heavy-duty canvas and vinyl variants that are load rated for 45.4 kg (100 lbs) and 113.4 kg (250 lbs) respectively.2300 800 999 55500 | /FallProtection Standard Safe Bucket modelshttp://bit.ly/2C9vsqYPuncture resistanceWhere you work, durability is non-negotiable.That’s why every Safe Bucket features hard composite plating at the bottom to protect it from accidental punctures. A leather sleeve also covers the inserts, protecting them from the elements and harsh work environments.Integrated carabiner and hoisting strapInstead of rope, which is susceptible to fraying,a heavy-duty hoisting/shoulder strap is built into everySafe Bucket. Each bucket is also equipped with a high-quality and lightweight aluminium twist-lock carabiner load rated for 30 kN (6,700 lbs). There is no need to worry about a knot failing, or a non-locking carabiner which may slip off ata connection point.24#3MScienceOfSafety | 00 800 999 555003M ™ DBI-SALA ®Hard-Body Safe Bucket Insert• C onverts a standard soft-body Safe Bucket into a hard-body Safe Bucket.•O ur reusable hard-body Safe Bucket insert keeps your Safe Bucket standing upright, making it easier to stage tools and stay productive.•I ntegrated inner pockets allow tools to be holstered and organised quickly.5 Gallon Safe Bucket• U sed to transport standard 5 gallon buckets.•5 gallon plastic buckets clip into the Safe Bucket with a unique hook system.•W hen not being used, the Safe Bucket can be flattened for easy storage.•U nique patent pending locking hook and loop closure system helps ensure that there are no accidental spills during lifting and transportation.Plastic bucket not included.Description1500141Hard-Body Safe Bucket InsertLoad rating150013545.4 kg (100 lbs)00 800 999 55500 | /FallProtection15000831500068150003626#3MScienceOfSafety | 00 800 999 55500Pullaway Wristband Slim Pullaway WristbandPullaway wristbands are designed for those who work around rotating or moving equipment. They feature an elastic strap to conform to the wearer’s wrist size automatically and come in standard and slim variants.3M ™ DBI-SALA ® Pullaway WristbandsAdjustable WristbandsAdjustable WristbandOur adjustable wristband uses a hook and loop system to adjust to any wrist size. An elastic band helps ensure a comfortable fit.Adjustable Wristband with Cord Adjusts to any wrist size using a hook and loop system. A built-in cord is used to quickly attach and stage tools directly to the wristband.Adjustable Wristband with Retractor Adjusts to any wrist size. A built-in retractor with an attached trigger can be used to quickly work with many hand tools.WristbandsThe sky’s the limit.3M is a trademark of 3M Company. DBI-SALA is a trademark of D B Industries, LLC.3M Fall Protection Business Capital Safety Group (NE) Ltd5a Merse Road, North Moons Moat Redditch, B98 9HL, UKCapital Safety Group (EMEA)Le Broc Center, Bâtiment A, Z.1. 1re Avenue – BP15 06511 Carros Le Broc, Cedex, FRANCE*************************************************************.com/FallProtection #3MScienceOfSafetyRegistered address: 3M Centre, Cain Road, Bracknell, Berkshire, RG12 8HT. Registered in England and Wales No. 1918922.Please recycle.©3M 2018. All rights reserved.Ref: 9701415 Rev E。
3MTM PetrifilmTM细菌总数测试卡产品简介：红色指示剂使读数更方便准群；48H 确认菌落数；亦适用乳酸菌检测。
编号： 6046 规格： 50 片/ 包，20 包/ 箱3MTM PetrifilmTM霉菌和酵母菌测试片产品简介：测试片中添加抗生素，可抑制细菌生长；含酵母菌指示剂，使酵母菌更容易计数；3－ 5 天确认霉菌酵母数。
编号： 6417 规格： 50 片/ 包，20 包/ 箱3MTM PetrifilmTM大肠菌群测试片产品简介：含改良VRB培养基；目的菌落显示为红色气泡；24H即可确认菌落数，节省检验时间 2 天。
编号： 6416 规格： 25 片/ 包， 40 包 / 箱3MTM PetrifilmTM高灵敏度大肠菌群测试片产品简介：灵敏度高达1cfu/5ml或1cfu/5g；目的菌落显示为红色带气泡，粉红色菌晕辅助计数；24h 即可确认菌落数。
编号： 6415 规格： 25 片/ 包，20 包/ 箱3MTM PetrifilmTM快速大肠菌落群测试片产品简介：培养基中含有特定的PH指示剂； 6--14h可估计大肠菌落数；24h 培养可获得准确的大肠菌群数。
编号： 6046 规格： 25 片/ 包，20 包/ 箱3MTM PetrifilmTM肠杆菌科测试片产品简介：同时检测乳糖发酵型的大肠菌群和非乳糖发酵型的沙门氏菌。
志贺氏菌、耶尔森氏菌等；24h 确认肠杆菌科菌落数；加工环境和加工后无染的优良指示。
编号： 6421 规格： 25 片/ 包，40 包/ 箱3MTM PetrifilmTM大肠菌群/大肠杆菌测试片产品简介：一个测试片同时检测大肠杆菌和大肠菌群；24—48h 确认大肠杆菌数，节省时间2－3 天；大肠菌群显示为蓝色带气泡。
编号： 6414 规格： 25 片/ 包，20 包/ 箱3MTM PetrifilmTM金黄色葡萄球菌测试片产品简介：一次检测等于三个Baird —Parker 琼脂平板和凝固酶实验的效果；适用脱氧核糖核酸酶反应系统，特异性更强；22－29h 内确认为金黄色葡萄球菌数；确认反应片并非必须。
Key Application:Finishing/Surface Prep3M ™ Flap Discs Flap Discs3M ™ Cubitron ™ II Please recycle. Printed in USA. © 3M 2018. All rights reserved. Issued: 11/18 14420HB 61-5002-8426-2 Rev. BAbrasive Systems Division3M Center, Building 223-6S-03St. Paul, MN 55144-10001-866-279-1235/abrasives3M, Cubitron and Scotch-Brite are trademarks of 3M Company. Used under license by 3M subsidiaries and affiliates.Warranty, Limited Remedy, and Disclaimer: Many factors beyond 3M’s control anduniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHERWARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.Scotch-Brite ™ Clean & Lead with:3M ™ Flap Discs 3M ™ Cubitron ™ II 3M Silver3M ™ Flap Discs3M™ Cubitron™ II 3M™ Cubitron™ II3M™ Cubitron™ II 3M™ Cubitron™ II3M™ Flap DiscsMeet thePREMIUM SERIESof right angle abrasives for unparalleled。
特别报道Special RepoRt32 食品安全导刊 2010年6月刊3M：坚持创新不断延长食品安全产品线3M （Minnesota Mining and Manufacturing Company），一个拥有100多年历史的全球知名企业，自创建以来，就奉行“坚持不懈，不断创新”的精神，平均每2天就会推出3种新产品。
正是这种创新精神成就了其在全球的核心竞争力。
在2009’食品安全优秀解决方案TOP100评选活动中，3M及其食品安全产品又再次证明了其无与伦比的实力，分别获得“优秀解决方案供应商”奖和“创新应用”奖。
为了解3M获奖的缘由及其产品的特点与创新性，本刊记者对3M中国有限公司食品安全部中国区经理陆苏飚进行了专访。
获奖感言记者：首先对3M在2009’食品安全优秀解决方案TOP100评选活动中荣获“优秀解决方案供应商”奖和“创新应用”奖表示祝贺。
对此，您有何感想？陆苏飚：非常感谢中国食品行业的各位同仁对3M 的厚爱与认可，能够获得众多业内专家对3M食品安全部门的肯定，我们感到非常荣幸。
成为所涉及领域内备受推崇的供应商是3M的愿景，我们会一如既往的为中国食品安全提供先进实用的解决方案，帮助食品企业应对越来越严峻的食品安全挑战。
3M食品安全战略记者：3M是一个综合型的公司，产品涉及很多领域，今后，3M是否会加大在食品安全方面的投入？陆苏飚：近年来，食品安全已经成为一个全球性的问题，如农药残留超标、非法使用添加剂、致癌物质的使用都对人类的生命健康造成了危害。
3M的管理层一直都在关注食品安全领域中的需求，并将食品工业安全定为集团发展战略平台之一。
2006年底，3M 投资近一亿美元并购了上市公司——英国Biotrace国际有限公司(全球领先的生物检测技术公司，旗下有Clean-Trace ™环境清洁度ATP品牌和Tecra ™致病菌检测品牌),将原来的3M Petrifilm ™微生物测试片（以下简称3M Petrifilm ™测试片）常规微生物检测单一产品线成功延伸到了环境清洁度快速检测、致病菌快速检测和采样制备等领域。
