当前位置：文档之家 › HWS450中文资料

HWS450中文资料

  • 格式：pdf
  • 大小：81.54 KB
  • 文档页数：2


HWS450
GaAs DC-6 GHz SPDT Switch
Aug. 2006 V6

Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512
http://www.hw.com.tw All specifications are subject to change without notice.

Features • Low Insertion Loss : 0.50 dB @ 2.7 GHz 0.65 dB @ 5.8 GHz • Isolation: 25.5 dB @ 2.7 GHz 27.5 dB @ 5.8 GHz • Low DC Power Consumption • Miniature QFN12L (3x3 mm) Plastic Lead (Pb) Free Package, RoHS Compliant • PHEMT process Description The HWS450 is a GaAs PHEMT MMIC SPDT switch operating at DC-6 GHz in a low cost miniature QFN12L (3 x 3 mm) plastic lead (Pb) free package. The HWS450 features low insertion loss and high isolation with very low DC power consumption. This switch can be used in WiMAX or IEEE 802.11a/b/g WLAN PC card and access point applications as transmit/receive switch, antenna diversity switch, or band-selection switch. QFN12L (3 x 3 mm)
Electrical Specifications at 25°C with 0, +3V Control Voltages
Parameter Test Conditions Min. Typ. Max. Unit

Insertion Loss
0.10-6.00 GHz 2.30-2.70 GHz 3.30-3.90 GHz 5.15-5.88 GHz 0.65 0.50 0.55 0.65 0.70 0.75 1.00 dB
dB
dB
dB

Isolation 0.10-6.00 GHz 2.30-2.70 GHz 3.30-3.90 GHz 5.15-5.88 GHz 20.0 20.0 22.0 25.0 25.5 25.0 27.5
dB
dB
dB
dB

Return Loss
0.10-6.00 GHz
15 dB

Input Power for 0.1 dB Compression 2.00-6.00 GHz @+3V @+5V 33 37
dBm
dBm

Second Harmonic Pin=20 dBm -75 dBc
Third Harmonic Pin=20 dBm -75 dBc

Input Third Order Intermodulation
Intercept Point

25 dBm Per Tone, 3.80 GHz

@+3V
@+5V
57 60 dBm

dBm

Control Current @+3V 5 100
uA
Note: All measurements made in a 50 ohm system with 0/+3.0V control voltages, unless otherwise specified.

元器件交易网www.cecb2b.com

HWS450
GaAs DC-6 GHz SPDT Switch
Aug. 2006 V6

Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512
http://www.hw.com.tw All specifications are subject to change without notice.

Typical Performance Data with 8pF
Capacitors @ +25°C
Absolute Maximum Ratings

Parameter Absolute Maximum
RF Input Power +36 dBm @ +3V
Control Voltage +6V
Operating Temperature -40°C to +85°C
Storage Temperature -65°C to +150°C

Pin Out (Top View)

RF1
C
B

3
2145678

9

1011
12

GNDGNDGNDGNDGNDVC1GND
C
A

C
B

RFC

RF2
C
B

C
A

GND

VC2

Note:
1. DC blocking capacitors CB=8pF are required on all
RF ports.
2. RF by-pass capacitors CA=8pF.
3. Exposed pad in the bottom must be connected to
ground by via holes.

Logic Table for Switch On-Path

VC1 VC2 RFC-RF1 RFC-RF2
1 0 On Off
0 1 Off On

‘1’ = +3V to +5V
‘0’ = 0V to +0.2V

Isolation vs Frequency
-35
-30
-25
-20
-15
-10
-5

2.02.53.03.54.04.55.05.56.0
Frequency(GHz)

I
s
o
l
a
t
i
o
n
(
d
B
)

Insertion Loss vs Frequency
-1.2
-1.0
-0.8
-0.6
-0.4
-0.2

2.02.53.03.54.04.55.05.56.0
Frequency(GHz)

I
n
s
e
r
t
i
o
n
L
o
s
s
(
d
B
)

Return Loss vs Frequency
-35
-30
-25
-20
-15
-10
-5

2.02.53.03.54.04.55.05.56.0
Frequency(GHz)

R
e
t
u
r
n
L
o
s
s
(
d
B
)

元器件交易网www.cecb2b.com

合集下载

74LS245中文资料_数据手册_参数

74LS245中文资料_数据手册_参数

7.1 Absolute Maximum Ratings ...................................... 4 7.2 ESD Ratings.............................................................. 4 7.3 Recommended Operating Conditions....................... 4 7.4 Thermal Information .................................................. 4 7.5 Electrical Characteristics........................................... 5 7.6 Switching Characteristics .......................................... 5 7.7 Typical Characteristics .............................................. 6 8 Parameter Measurement Information .................. 7 9 Detailed Description .............................................. 8 9.1 Overview ................................................................... 8 9.2 Functional Block Diagram ......................................... 8
IRFP450A中文资料

IRFP450A中文资料

45 60 75
V D S , D ra in-to-S ource V oltage (V)
QG , Total Gate Charge (nC)
Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage
2

元器件交易网
IRFP450A
100
VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V TOP
100
10
I D , Drain-to-Source Current (A)
I D , Drain-to-Source Current (A)
元器件交易网
PD -91884
SMPS MOSFET
IRFP450A
HEXFET® Power MOSFET
Applications l Switch Mode Power Supply ( SMPS ) l Uninterruptable Power Supply l High speed power switching Benefits Low Gate Charge Qg results in Simple Drive Requirement l Improved Gate, Avalanche and Dynamic dv/dt Ruggedness l Fully Characterized Capacitance and Avalanche Voltage and Current l Effective Coss Specified ( See AN 1001)
FS450R17KE3(EUPEC)

FS450R17KE3(EUPEC)

NutzungsbedingungenDie in diesem Produktdatenblatt enthaltenen Daten sind ausschließlich für technisch geschultes Fachpersonal bestimmt. Die Beurteilung der Geeignetheit dieses Produktes für die von Ihnen anvisierte Anwendung sowie die Beurteilung der Vollständigkeit der bereitgestellten Produktdaten für diese Anwendung obliegt Ihnen bzw. Ihren technischen Abteilungen.In diesem Produktdatenblatt werden diejenigen Merkmale beschrieben, für die wir eine liefervertragliche Gewährleistungübernehmen. Eine solche Gewährleistung richtet sich ausschließlich nach Maßgabe der im jeweiligen Liefervertrag enthaltenen Bestimmungen. Garantien jeglicher Art werden für das Produkt und dessen Eigenschaften keinesfalls übernommen.Sollten Sie von uns Produktinformationen benötigen, die über den Inhalt dieses Produktdatenblatts hinausgehen und insbesondere eine spezifische Verwendung und den Einsatz dieses Produktes betreffen, setzen Sie sich bitte mit dem für Sie zuständigen Vertriebsbüro in Verbindung (siehe , Vertrieb&Kontakt). Für Interessenten halten wir Application Notes bereit.Aufgrund der technischen Anforderungen könnte unser Produkt gesundheitsgefährdende Substanzen enthalten. Bei Rückfragen zu den in diesem Produkt jeweils enthaltenen Substanzen setzen Sie sich bitte ebenfalls mit dem für Sie zuständigen Vertriebsbüro in Verbindung.Sollten Sie beabsichtigen, das Produkt in Anwendungen der Luftfahrt, in gesundheits- oder lebensgefährdenden oder lebenserhaltenden Anwendungsbereichen einzusetzen, bitten wir um Mitteilung. Wir weisen darauf hin, dass wir für diese Fälle- die gemeinsame Durchführung eines Risiko- und Qualitätsassessments;- den Abschluss von speziellen Qualitätssicherungsvereinbarungen;- die gemeinsame Einführung von Maßnahmen zu einer laufenden Produktbeobachtung dringendempfehlen und gegebenenfalls die Belieferung von der Umsetzung solcher Maßnahmen abhängigmachen.Soweit erforderlich, bitten wir Sie, entsprechende Hinweise an Ihre Kunden zu geben.Inhaltliche Änderungen dieses Produktdatenblatts bleiben vorbehalten.Terms & Conditions of usageThe data contained in this product data sheet is exclusively intended for technically trained staff. You and your technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application.This product data sheet is describing the characteristics of this product for which a warranty is granted. Any such warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its characteristics.Should you require product information in excess of the data given in this product data sheet or which concerns the specific application of our product, please contact the sales office, which is responsible for you (see , sales&contact). For those that are specifically interested we may provide application notes.Due to technical requirements our product may contain dangerous substances. For information on the types in question please contact the sales office, which is responsible for you.Should you intend to use the Product in aviation applications, in health or live endangering or life support applications, please notify. Please note, that for any such applications we urgently recommend- to perform joint Risk and Quality Assessments;- the conclusion of Quality Agreements;- to establish joint measures of an ongoing product survey, and that we may make delivery depended onthe realization of any such measures.If and to the extent necessary, please forward equivalent notices to your customers.Changes of this product data sheet are reserved.。

HSU45-31中文资料

HSU45-31中文资料

DUAL SELECTABLE AC INPUT AC-DC SINGLE & MULTIPLE OUTPUT45-150 WATTS 19" COMPATIBLE EUROCARD SWITCHING POWER SUPPLIES HSU45,HSU60 & HSU100 SERIESFEATURES:DUAL INPUT RANGE USER SELECTABLE 19" COMPATIBLE EUROCARD FORMAT MEET THE SAFETY STANDARDSEMI MEET CISPR PUB.22 & FCC CLASS B CE MARKING COMPLIANCEHSU45 6TE x 3U x 160MM VMEbus STANDARDHSU60 8TE x 3U x 160MM VMEbus STANDARD HSU100 10TE x 3U x 160MM VMEbus STANDARDSPECIFICATIONINPUT SPECIFICATIONInput Voltage: 115Vac/230Vac dual selectable. Input Connector: DIN 41612 at rear. Input Frequency: 47-63Hz.Inrush Current: Typ.25A @230Vac.Input Current: HSU45 0.88A@115Vac/0.44A@230Vac.Use T2.0A/250Vac fuse.HSU60 1.2A@115Vac/0.7A@230Vac.Use T2.5A/250Vac fuse.HSU100 2.2A@115Vac/1.2A@230Vac.Use T3.15A/250Vac fuse.Dielectric Withstand: Meet IEC950.EMI: Meet CISPR PUB.22 or FCC Class B. Power Fail Signal: Installed.Remote (Logic) Inhibit: Available.Hold-up Time: Typ. 20mS @115Vac/50mS @230Vac. Earth leakage: Typ. 0.3mA @230Vac.Overload Protection (OLP):Fully protected againstoutput overload and short circuit.Consult the factory for OLP setting.OUTPUT SPECIFICATIONOutput Voltage: See Ratings Chart. Output Current: See Ratings Chart.Output Wattage: Typ. 45 Watts for HSU45.Typ. 60 Watts for HSU60. Typ. 100 Watts for HSU100.Output Connector: DIN 41612 at rear. Line Regulation: Typ. 0.4%.Load Regulation: Main VO1 typ. ±1.0%.Aux. VO2 typ. ±2-3.0% (PR).±2.0% (Mag. Amp.)Aux. VO3 typ. ±2-3.0% (PR). Aux. VO4 typ. ±2-3.0% (PR).Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in at main VO1 (latch).Adjustability: Available at main output VO1 andAux. output VO2 (Mag. Amp.).Remote Sense: Installed in main VO1.GENERAL SPECIFICATIONEfficiency: Typ. 70-75%.Switching Frequency: Typ. 100K Hz. Circuit Topology: Forward circuit.Transient Response: Output voltage returns in less than3mS following a 25% load change.Safety Standard: IEC950/UL1950.Power Density: 1.4 Watt / Cubic Inch for HSU45 & HSU60.1.9 Watt / Cubic Inch for HSU100.Operating Temperature: 0 to +50°C at full load.Derate linearly to +70°C at half load.Storage Temperature: -20 to +85°C.Temperature Coefficient: Typ. 0.04%/°C. Cooling: Free air convection cooling.Construction format: 6,8,10TEx3Ux160mm19” compatible Eurocard VMEbus standard.OUTPUT VOLTAGE/CURRENT RATINGS CHART 10/15/2001HSU45 SeriesMECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: HSU45 537.0g (18.90 Oz.)SINGLE OUTPUTMAIN VO1 @# MODEL NO. Typ. Volt. HSU45-10/(E) 9.0A 5.0V HSU45-11 4.0A 12.0V HSU45-11/(E) 3.7A 12.0V HSU45-12/(E) 3.0A 15.0V HSU45-13/(E)2.0A 24.0V(E) With gas-tube for safety purpose.DUAL OUTPUTMAIN VO1 @# AUX. VO2 ◇●MODEL NO. Typ. Volt. Typ. Volt. HSU45-204.0A5.0V 2.0A 12.0V HSU45-21 2.0A 12.0V 1.5A 12.0V HSU45-22 4.0A 5.0V 1.2A 15.0V HSU45-23 1.5A 15.0V 1.5A 15.0V HSU45-24 4.0A 5.0V 1.0A 24.0V HSU45-251.0A 24.0V1.0A 24.0VTRIPLE OUTPUTMAIN VO1 @#AUX. VO2 ◇● AUX. VO3 ◇● MODEL NO. Typ. Volt. Typ. Volt. Typ. Volt.HSU45-30 3.0A 5.0V 2.0A 12.0V 0.5A 5.0VHSU45-31 3.0A 5.0V 2.0A 15.0V 0.5A 15.0VHSU45-32 3.0A 5.0V 2.0A 12.0V 0.5A 12.0V HSU45-33 3.0A 5.0V 1.0A 24.0V 0.5A 12.0V Symbol: " "OVP built-in. "@" Adjustable. "#" Remote sensing. "▲" Magnetic Amplifier. "●" Post Regulator. "◇" Floating ( or isolated) output.INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTSAC INPUTSINGLE/DUAL/TRIPLE OUTPUTASSORTED SIGNAL ASSIGNMENT AC-L AC-N AC-G +VO1 -VO1 +VO2 -VO2 +VO3 -VO3 NC LOG. INH. +S -SPOWERFAILHSU45-1X28 30 32 4,6 12,14 - - - - 16,18,24,26 20 8 10 22 HSU45-2X28 30 32 4 6 8 10 - - 12,14,16,18,24,26 20 - - 22 HSU45-3X28 30 32 4,6, 8,10 12 14 16 18 24,26 20 - - 22 Mating connector:HSU60 SeriesMECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: HSU60 707.0g (24.94 Oz.)SINGLE OUTPUTMAIN VO1 @# MODEL NO. Typ. Volt. HSU60-10 12.0A 5.0V HSU60-10B1 10.0A 6.0V HSU60-11 5.0A 12.0V HSU60-12 4.0A 15.0V HSU60-13 2.5A 24.0V HSU60-153.0A 19.0VDUAL OUTPUTMAIN VO1 @# AUX. VO2 ◇▲MODEL NO. Typ. Volt. Typ. Volt. HSU60-205.0A 5.0V 3.0A 12.0V HSU60-21 2.5A 12.0V 2.5A 12.0V HSU60-22 5.0A 5.0V 2.5A 15.0V HSU60-23 2.0A 15.0V 2.0A 15.0V HSU60-24 5.0A 5.0V 1.5A 24.0V HSU60-251.4A 24.0V1.4A 24.0VTRIPLE OUTPUTMAIN VO1 @# AUX. VO2 ◇▲ AUX. VO3◇● MODEL NO. Typ. Volt. Typ. Volt. Typ. Volt. HSU60-30 5.0A 5.0V 2.5A 12.0V 1.0A 5.0V HSU60-31 5.0A 5.0V 2.0A 12.0V 0.5A 15.0V HSU60-32 5.0A 5.0V 2.5A 12.0V 0.5A 12.0V HSU60-335.0A 5.0V1.5A 24.0V 0.5A 12.0V"●" Post Regulator. "◇" Floating(or isolated) output.INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTSAC INPUTSINGLE/DUAL/TRIPLE OUTPUTASSORTED SIGNALASSIGNMENT AC-L AC-N AC-G +VO1 -VO1 +VO2 -VO2 +VO3 -VO3 NCLOG.INH.+S -S POWER FAIL HSU60-1X28 30 32 4,6 12,14 - - - - 16,18,24,26 20 8 10 22 HSU60-2X28 30 32 4 6 8 10 - - 12,14,16,18,24,26 20 - - 22 HSU60-3X28 30 32 4,6, 8,10 12 14 16 18 24,26 20 - - 22HSU100 SeriesMECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: HSU100 943.0g (33.6 Oz.)DUAL OUTPUTMAIN VO1 @# AUX. VO2 ◇▲MODEL NO. Typ. Volt. Typ. Volt. HSU100-208.0A 5.0V 5.0A 12.0V HSU100-21 4.2A 12.0V 4.2A 12.0V HSU100-22 8.0A 5.0V 4.0A 15.0V HSU100-23 3.4A 15.0V 3.4A 15.0V HSU100-24 8.0A 5.0V 2.5A 24.0V HSU100-25 2.1A 24.0V 2.1A 24.0V HSU100-26E8.0A 12.0V0.5A 24.0VSINGLE OUTPUTMAIN VO1 @# MODEL NO. Typ. Volt. HSU100-10 20.0A 5.0V HSU100-11 8.0A 12.0V HSU100-12 7.0A 15.0V HSU100-13 4.2A 24.0V HSU100-16 3.6A 28.0V HSU100-182.0A 48.0VTRIPLE OUTPUTMAIN VO1 @# AUX. VO2 ◇▲ AUX. VO3 ◇●MODEL NO. Typ. Volt. Typ. Volt. Typ. Volt. HSU100-30 7.0A 5.0V 5.0A 12.0V 1.0A 5.0V HSU100-31 6.0A 5.0V 4.0A 15.0V 0.6A 15.0V HSU100-32 7.0A 5.0V 5.0A 12.0V 0.5A 12.0V HSU100-337.0A 5.0V 2.5A 24.0V 0.5A 12.0V QUAD OUTPUTMAIN VO1 @# AUX. VO2 ■† AUX. VO3 ◇● AUX. VO4 ◇● MODEL NO. Typ. Volt. Typ. Volt. Typ. Volt. Typ. Volt. HSU100-484.0A 12.0V 2.0A 24.0V 0.5A 12.0V 0.5A 12.0V HSU100Q-050MII 10.0A5.0V 1.0A 24.0V 1.0A 12.0V 1.0A 12.0V HSU100Q-050QII10.0A 5.0V1.0A 48.0V0.5A 12.0V 0.5A 12.0VSymbol: " " OVP built-in. "@" Adjustable. "#" Remote sensing. . "▲" Magnetic Amplifier. "●" Post Regulator. "†" Stacked on main output."◇" Floating(or isolated) output. "■" Couple common choke.INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTSAC INPUT SINGLE/DUAL/TRIPLE/QUAD OUTPUTASSORTED SIGNALASSIGNMENT AC-L AC-N AC-G +VO1 -VO1 +VO2 -VO2 +VO3 -VO3 +VO4 -VO4 NCLOG.INH.+S -S POWER FAIL HSU100-1X28 30 32 4,6 12,14 - - - - - - 16,18,24,26 20 8 10 22 HSU100-2X28 30 32 4 6 8 10 - - - - 12,14,16,18,24,26 20 - - 22 HSU100-3X28 30 32 4,6, 8,10 12 14 16 18 - - 24,26 20 - - 22 HSU100-4X28 30 32 4 - 10 - 12 14 16 18 6,8,20,22,24 - - - - Mating connector:DIN41612-H15 Female。