FINE250 spot 说明书

• A/V cable • CD-ROM • Owner's manual
SD™/SDHC™/SDXC™ Memory Cards (2GB - 64GB)
• Mini-HDMI/HDMI Cable
P10NA02930A
• SD™/SDHC™/SDXC™ Memory Cards (2GB-64GB)
Aperture F3.5/F7.1/F10 (Wide) F5.3/F11/F16 (Telephoto) with ND filter
Focus distance Normal: (from lens surface)
Macro:
Wide: Approx. 45cm / 1.4 ft. to infinity Telephoto: Approx. 2.5m / 8.2 ft. to infinity Wide: Approx. 5cm - 3.0m / 1.9 in. - 9.8ft. Telephoto: Approx. 1.2m - 3.0m / 3.9ft. - 9.8ft.
Travel zoom compact camera Aimed at gadget lovers, who like to travel, the F660EXR is a compact, 15x optical zoom camera with a whole host of exciting features. Combining a 16 megapixel EXR-CMOS sensor with features such as 30x Intelligent Digital Zoom, Face Tracking Auto Focus and 11fps continuous shooting means that whether the subject matter is standing still or on the move, the images will be crisp and clear. What's more with Full 1080p HD movie capture, 3D Shooting mode, a high contrast 3.0inch LCD screen and Motion Panorama 360, this digital camera will be perfect to capture a vast range of photographs.

Installation InstructionsPRO2500 &PRO2500CH Series SaltDogg®Electric Drive Poly Hopper Spreader2.5 cubic yardsU.S. Patent 9,562,333Table of ContentsGeneral Information (1)Safety Precautions (1)Installation Instructions ........................................................... 1-3Spreader Operation (4)Spreader Maintenance ............................................................4-5Warranty Information (5)Repair Parts & Drawings .........................................................5-8General InformationOverall Length: 116.5 inchesOverall Width: 48 inchesOverall Height: 44.3 inchesEmpty Weight: 986 lbs.Capacity Struck: 2.5 cu. yd.Vehicle RequirementsTrucks with minimum GVWR 13,000 lbs. (8 ft. bed), 150 AMP orhigher alternator is recommended.Average Material WeightsThis spreader is restricted to the use of dry, free-flowing salt,sand, and sand/salt mix. Do not run other materials through thespreader.Materials to use Weight (pounds per cubic yard)Fine Salt-Dry 2,250Coarse Salt-Dry 1,431Sand/Salt up to 50/50 Mix-Dry 2,700Note: To calculate the total spreader weight (including icecontrol material), add the empty spreader weight plus the icecontrol material and spreader accessories.CAUTIONDo not overload vehicle beyond the vehicle’s GVWR or GAWR.Check vehicle's load rating certification sticker for maximumvehicle capacity.WARNINGImproper installation and operation could cause personalinjury, and/or property damage. Observe the following SafetyPrecautions before, during and after operating this spreader. Byfollowing these precautions and common sense, possible injuryto persons and potential damage to this machine may be avoided.Safety Precautions1. Read the entire Installation Instructions before operating thisspreader.2. Read and understand all safety decals on the spreaderbefore operating.3. Check to make sure all safety guards are securely mountedinto place before operating this spreader.4. Verify that all personnel are clear of the spreader spray areabefore starting or operating this spreader.5. Do not over-load your vehicle beyond payload limits. If thereare any questions, contact the vehicle manufacturer.6. Do not adjust, clean, lubricate or unclog material jambswithout first turning off the spreader.7. Do not climb on or in the spreader during operation. Do notride on the spreader while the vehicle is in motion.8. Make sure the spreader is securely fastened to the vehicle inaccordance with this manual.9. Do not operate a spreader that is in need of maintenance orrepairs.10. Do not operate the spreader while ill, tired, or under theinfluence of alcohol or drugs.11. Batteries normally produce explosive gases which cancause personal injury. Always disconnect the battery beforeremoving or replacing electrical components.12. Do not leave unused material in hopper. Material canfreeze or solidify, causing spreader to not work properly, and/ordamage the unit. Empty and clean after each use.Installation Instructions1.Mounting the Spreader onto the VehicleA. Remove the tailgate from the vehicle (if equipped) as well asany other object which will interfere with the spreader.B. Check truck’s bed for all kinds of sharp debris or foreignobjects. They can cut and seriously damage poly hopper.C. Remove chute, hardware kit from inside spreader. If spreaderhas been used make sure there is no material left in the hopper.D. Lift spreader using all tie downs (Fig. 1), or using fork lift.Lower spreader into the truck bed.G. Slide spreader forward or backwards to make sure that chute doesn’t interfere with any part of the truck. Remove one pin and rotate chute as shown in Fig. 4. Make sure that chute doesn’t hit any part of the truck.H. Measure the distance from the front of the truck bed to the front of the hoppers front legs. Fabricate spacer to fit between front of the spreader and front of the bed using 2 x 6 boards and install it between the spreader and truck bed front wall as shown in Fig. 5I. In addition, secure spreader using four ratchet straps. Tighten straps evenly. (Fig 5.1)Fig. 5Fig. 5.1E. Connect the 2-pin connector on the power cable to the control box mating connector.F. Connect wire harness single connectors to control box connectors.G. Connect fuse connector to the fuse terminal or ignition switch (5 AMP max).H. Lay out a path for the power cable to the battery, use quick ties to secure power cable. DO NOT CONNECT TO BATTERY AT THIS TIME!I. Lay out path for wire harness to the rear of the vehicle. Stay clear of the exhaust system. Excess heat can damage the wire harnesses. Use quick ties to secure harness to underbody.J. Connect the wire harness to the motors and vibrator. Make sure wire colors on wire harness match colors on the motor.K. Thoroughly clean battery terminals. Make sure battery terminals have no tarnish or corrosion. DO NOT CONNECT WIRE HARNESS TO DAMAGED OR CORRODED TERMINALS! IT MAY RESULT IN OVERHEATING, LOST POWER AND POTENTIAL CONTROLLER DAMAGE! Install the circuit breaker within 12" from the battery. Connect red wire from cable 3035935 and battery cable 3001379 to circuit breaker according to the breaker markings. Connect the power cable and battery cable directly to the battery. Make sure connection to battery terminals is good and tight. Loose connection to battery terminals will result in sparking, overheating and possible battery damage!L. Insure all functions of the controller are working properly.M. Observe auger/ chain moving in proper direction. If direction is wrong reverse wires between Motor and Wire Harness.N. Optional spot light (5 AMP max) can be installed on spreader. Use utility light kit part number 3018009. Remove cap from single white wire. Connect light to this wire and the trucks frames known ground (negative).2. Control Box and Vehicle Wiring Harness InstallationNote: Make sure you have connected the proper wire color. This is a wire ground electrical system! No Connections to truck’s frame or body allowed!Note: Always disconnect battery before attempting to install electrical components on your vehicleA. Mount the controller in a convenient location in the truck cab. It is recommended not to mount the controller directly in front of heat vents. Allow ample air space around controllerCAUTIONInspect straps and hardware after each time spreader is loaded. Tighten straps and hardware if necessary.CAUTIONDo not mount controller in the way of air bag deployment!WARNINGImportant! Do not use ratchet straps or tailgate latch exclusively! Always use spacer!WARNINGDo not drill holes into fuel tanks, fuel lines, through electrical wiring, etc that may be damaged by drilling. To insure good performance of your spreader, check the condition of truck’s electrical system. Using digital voltmeter, check alternator and battery voltage. With engine running and head lights and heater fan ON good voltage reading should fall between 13.0 and 15.3 volts. If voltage reading falls out of this range, check and adjust your electric system.IMPORTANTMake sure all wires securely attached to vehicle or spreader. Use wire ties and/or wire clamps to attach wires. All excess wires must be rolled into bundles and attached to vehicle or spreaderB. Route both wire harnesses into truck cab through firewall (it maybe necessary to drill holes). Insulate hole to avoid water leaks.C. Insure no wires are nicked or damaged during installation.D. Connect the 4-pin connector on the wire harness to the control box 4-pin connector.301694402037003035935CB150PB 3001379BATTERY POSITIVEBATTERY NEGATIVECONNECT TO FUSE OR WIRE IN FUSE PANEL,CONTROLLED BY IGNITION SWITCHLoosen Screws, Rotate Shields to Adjust Spray PatternUnscrew Bolts, Slide Lower Chute Up or Down Into Desired Position,Reinstall & Tighten BoltsSpreader MaterialsSpreader Operation1. PRO2500 is equipped with a dual independent speed controller. To start spreader, press “POWER” switch. Switch will be illuminated. Auger/ chain and spinner will start rotating. Auger and spinner can be adjusted independently.2. To activate vibrator press “VIBRATOR” switch, vibrator switch will illuminate. Vibrator can operate continuously for 30 min max with 15 min brakes to avoid overheating.3. To stop spreader press “ON-OFF” switch again.4. PRO2500 controller is equipped with electronic overload and current spike protection. Controller is not serviceable.Controller has two LED lights: “ERROR” and “FLASH NUMBER”. If there is a problem the ERROR LED will illuminate and FLASH NUMBER LED will give a series of flashes. Count the number of flashes and refer to the troubleshooting guide provided with the controller. Additionally you can go online for the troubleshooting codes at https:///media/3802/3026671_A.pdf 5. Spreading pattern can be controlled by repositioning of the baffles on the chute as shown in Fig. 6. Chute heights can be adjusted to accommodate different vehicle heights (Fig.6).The density of materials that can be loaded into the spreader varies and therefore so will the amount of a given material that can be carried by the spreader before the maximum load rating is reached.1. Ensure that the spreader is securely mounted to the vehicle and that the top screen is installed and secured in the hopper.2. Remove the tarp, if used.3. Determine the amount of material that you can safelytransport using your vehicles GVWR/GAWR and the following table on page 1.4. Fill the spreader evenly with your material, making sure not to fill past the top of the hopper.Fig. 66. Check the Feed Chain tension periodically. To check the tension, measure in 21"-25" from the rear edge of the gear box mount. Push up on the chain with your hand. The conveyor chain should lift up 2"-3" off the conveyor chain guide or cross angles (Fig. 7).Feed ChainRear of Sill Extension2" - 3"21" - 25"Fig. 7WARNINGNever attempt to lift spreader with material in hopper!WARNINGNever leave material in hopper for extended period of time. Material can freeze, solidify and seriously damage the spreaderIMPORTANTOnly use dry salt, sand, sand/salt, or cinder/salt mixes in the spreader. Other materials could cause damage to the machine.IMPORTANTWhen filling the spreader, do not exceed the gross-vehicle-weight rating (GVWR) or gross-axle-weight rating (GAWR).IMPORTANTOverfilling the hopper could damage the spreader & your vehicle.Spreader Maintenance1. Wash spreader after every use. Make sure no material is left under auger/ chain and/or inside trough.2. Inspect and retighten fasteners after every 5-7 hours of operation.3. Lubricate bearings every 7-10 hours of operation using general automotive grease.4. Inspect terminals/connectors every time you disconnect spreader from wire harness. Apply thin layer of dielectric grease on terminals. If any tarnish/corrosion is found, clean terminals and apply dielectric grease.5. Use dielectric grease on all electrical connectors before an electrical connection is made or after connector is disconnected6. Empty the spreader of all ice control materials when not in use. Wash out the spreader to prevent material builds up.7. It is recommended to cover spreader with the tarp during storage periods.End of Season Maintenance1. Wash spreader. Make sure no material or residue is left in and outside the hopper.2. Lubricate bearing using general automotive grease.3. Inspect wire harness, connectors for broken insulation, missing components. Replace if necessary.4. Apply dielectric grease on all electrical connectors.5. Store hopper indoors, in a dry, cool place.6. Remove controller from truck. Store controller indoors, in a dry cool place.7. Inspect wire near connectors. Check for broken or missing insulation. Check for tarnished or corroded wires. Trim corroded wires and replace connectors if necessarySummer Storage1. Apply dielectric grease or similar protective compound on all electrical connectors & protect them with caps before storage.2. Disconnect and remove speed controller from vehicle and store it in dry and cool place. Protect controller from excessive heat and moisture.3. Clean hopper and trough from all kinds of debris.4. Remove, thoroughly lubricate and reinstall trough bearing.5. Protect hopper from excessive temperatures during summer storage.AccessoriesPRO2500 is supplied with tarp 3030857. To insure proper tarp operation, attach tarp to all hopper posts as shown below.Repair Parts - Standard Chute Assembly Part # 3031475Bill of MaterialsITEM PART NO.QTY.DESCRIPTION130308681UPPER CHUTE WELDMENT230309301CHUTE OUTER, POLY330309081MOTOR MOUNT CHUTE430309071MOTOR 12 VDC, .5 HP SPINNER5FCS038016075SS8SCREW, HHC-3/8-16 X 3/4 SST630123931SPINNER, 14" POLY CW730250651BUSHING STRAIN RELIEF8FWF025063007SS4WASHER, FLAT 1/4 SAE SS9FCS025020075SS2SCREW, CAP 1/4-20 X 3/4 SST1030085492SCREW,HEXHD CAP 1/4-20X.5 SST 1130309272SHIELD, CHUTE1230317553PLASTIC HEAD THUMB SCREW 3/8-16X3/4 SST 1330071154WASHER, FLAT 3/8 X 1.5 X.048 SST14FWL038069009SS4WASHER, LOCK RHS-3/8 SST1530071131PIN, CLEVIS, 5/16 X 2-1/2, .141 HOLE ZN 1630149941PIN,COTTER,1/8IN X 1IN SST12345678910111213141516 CAB SIDE LABELSECURE TARP ON SPREADERATTACHING BUNGEE CORDTO ALL POSTSRepair Parts - PRO2500 Auger Hopper AssemblyBill of MaterialsITEMPART NO.QTY.DESCRIPTION 130307631HOPPER PRO2500230329991TROUGH WELDMENT PRO25003300711512WASHER, FLAT 3/8 X 1.5 X.048 SST 4FWL038069009SS 16WASHER, LOCK RHS-3/8 SST 5FCS038016075SS12SCREW, HHC-3/8-16 X 3/4 SST 614102001BEARING, FLANGED 1-1/8"730012554NUT, HEX FLNG-3/8-16 SST 830330031SPACER, GEAR MOTOR930245751GEAR MOTOR CONVEYOR 12 VDC 1030336601AUGER PRO 5.25 VARIABLE LH 1130336631SLEEVE, AUGER ADAPTER12FCS038016100SS 8SCREW, HHC 3/8-16 X 1 304 SST 13FWF038100007SS 4WASHER, FLAT 3/8 USS SST 14FNE038016044SS20NUT, NYLOCK 3/8-16 X 7/16 SST 1530012501SCREW, HHC-1/2-13 X 3 SST 16FNE050013053SS1NUT, NYLOCK 1/2-13 SS 1730330701BRACKET BEARING FRONT1892400861BEARING, 1-1/4 FLANGE 2 HOLE 19FCB037516100SS4BOLT, 3/8-16 X 1 CARRIAGE SST 2030222204TIE-DOWN WELDMENT 2130308542CROSS MEMBER22300514012SCREW, HH1/2-13X 3.5, GR 5 ZN 23FWF05010601012WASHER, FLAT 1/2" SAE ZINC 24FNE05001305312NUT, NYLOCK 1/2-13 ZINC 2530308631INVERTED VEE, PRO25002630311731BRACKET VIBRATOR2730074161VIBRATOR 200 LBS 12 VDC ITEMPART NO.QTY.DESCRIPTION2830311761PLATE WELDMENT, VIBRATOR29FCS038016150SS4SCREW, HX HD CAP 3/8-16 X 1-1/2 SST 3030311691SHROUD31FWF025063007SS 2WASHER, FLAT 1/4 SAE SS 32FCS025020075SS2SCREW, CAP 1/4-20 X 3/4 SST3330331652STUD THREADED 5/16-18 X 2.5 SST 3430067192NUT, HEX FLANGE - 5/16-18 SS 3530312031MOUNT CONNECTORS3630075227SCREW, SHEET MTL #12x1.0 HEX WASHER HD SS'f 3730312762CLIP ATTACHMENT, CONNECTOR DEUTSCH 3830325911DECAL, DANGER, MOVING CONVEYOR/AUGER 3930325951DECAL, CAUTION, MOUNTING 4030330761CHUTE ATTACHMENT4130121444BOLT, CARRIAGE, 5/16-18 X 1 SST 42FNE031018034SS4NUT, NYLOCK 5/16-18 SS4330353461RIGHT ANGLE JUNCTION BLOCK4430353572SCREW SOCKET HD, RND 8-32X 1.50 SST 4530353582NUT, NYLOCK 8-32 SST, BLACK OXIDE 468002GREASE FITTING, 1/4 STD4730353472GREASE FITTING 1 MTU BE 1/8 NPT STRAIGHT 4830357422BUSHING SNAP THICK PANEL4930353442GREASE FITTING 1 MTU BE 1/4-28 MALE STRAIGHT 5030353591GREASE TUBE REAR BEARING AUGER 5130360161GREASE TUBE FRONT BEARING AUGER 5243753CLAMP , HOSE .4375, 9/32 HOLE 5330358541LABEL PATENT5430331721DECAL CONNECTION1234 56 78 9 10 111213 14 15 1617 18 19 20 212223 24 2526 272829 3031 32 333435 36 37 3839404142 43 44 45 46 47 4849 5051 525354Repair Parts - PRO2500CH Chain Hopper AssemblyBill of MaterialsITEMPART NO.QTY.DESCRIPTION 130307631HOPPER PRO2500230331641WIPER BRACKET 330352691WIPER BELT, FRONT4300752212SCREW, SHEET MTL #12x1.0 HEX WASHER HD SS'530277721TROUGH CHAIN PRO5006300711512WASHER, FLAT 3/8 X 1.5 X.048 SST 7FWL038069009SS16WASHER, LOCK RHS-3/8 SST 830138211GEAR MOTOR CONVEYOR 12 VDC 9FCS038016100SS8SCREW, HHC 3/8-16 X 1 304 SST 1014102001BEARING, FLANGED 1-1/8"1130314832BOLT, 3/8-16 X 1 CARRIAGE SHORT NECK SST 12FNE038016044SS14NUT, NYLOCK 3/8-16 X 7/16 SST 13KS4022KEY, 1/4 X 1/4X21414102502SPROCKET, 6 TOOTH PINTLE CHAIN 151401100P 1CHAIN ASSY D662 122 LINKS 1630085711SHAFT IDLER, ASSEMBL Y 1714110012BEARING, IDLER TAKE UP 1830230462BOL T, WELDED TAKE UP 1930230222SPRING CHAIN TENSION 2030311992TAKE-UP NUT WELDMENT21FNH063011054SS2NUT, HH 5/8-11 X 17/32 HIGH SST 2230311951CHAIN COVER23FWL025050006SS 4WASHER, 1/4 IN. SPRING LOCK SST 24FCS025020075SS6SCREW, CAP 1/4-20 X 3/4 SST 2514102411WIPER BELT, HOPPER26FWF025063007SS7WASHER, FLAT 1/4 SAE SS2730085495SCREW,HEXHD CAP 1/4-20X.5 SST 28FNE025020031SS5NUT, NYLON INSERT 1/4-20 SST 2930222204TIE-DOWN WELDMENT 3030308542CROSS MEMBER31300514012SCREW, HH1/2-13 x 3.5, GR 5 ZN 32FWF05010601012WASHER, FLAT 1/2" SAE ZINC ITEM PART NO.QTY.DESCRIPTION3430308631INVERTED VEE, PRO25003530311731BRACKET VIBRATOR3630074161VIBRATOR 200 LBS 12 VDC 3730311761PLATE WELDMENT, VIBRATOR38FCS038016150SS4SCREW, HX HD CAP 3/8-16 X 1-1/2 SST 3930353461RIGHT ANGLE JUNCTION BLOCK 408003GREASE FITTING, 1/4 STD4130353572SCREW SOCKET HD, RND 8-32X 1.50 SST 4230353582NUT, NYLOCK 8-32 SST, BLACK OXIDE4330353473GREASE FITTING 1 MTU BE 1/8 NPT STRAIGHT 4430353441GREASE FITTING 1 MTU BE 1/4-28 MALE STRAIGHT 4530353452GREASE FITTING 1 MTU BE 1/4-28 MALE 90 DEGREE 4630353481GREASE HOSE REAR BEARING 4730360511GREASE HOSE FRONT DR SIDE 4830360521GREASE HOSE FRONT PS SIDE 4950003HOSE CLAMP , .375 DIA 5030311691SHROUD5130312031MOUNT CONNECTORS5230312762CLIP ATTACHMENT, CONNECTOR DEUTSCH 5330330761CHUTE ATTACHMENT5430121444BOLT, CARRIAGE, 5/16-18 X 1 SST 55FNE031018034SS4NUT, NYLOCK 5/16-18 SS 5614990352LABEL, WARNING 35714990301LABEL, CAUTION 1 (PAYLOAD)5830325911DECAL, DANGER, MOVING CONVEYOR/AUGER 5930325931DECAL, DANGER, CONVEYOR 6030325951DECAL, CAUTION, MOUNTING6130331652STUD THREADED 5/16-18 X 2.5 SST 6230331721DECAL CONNECTION6330067192NUT, HEX FLANGE - 5/16-18 SS 64FCS038016075SS 12SCREW, HHC-3/8-16 X 3/4 SST12 3 456 78 9 10 11121314 15 16 17 18 19 20 21 22 2324 25 26 27 28 29303132333435 36 3738 3940 4142 43 4445 46 47 484950 51 52 53 545556 57 5859 60 6162 63 64Repair Parts - PRO2500CH SpreaderRepair Parts - PRO2500 SpreaderBill of MaterialsBill of MaterialsITEMPART NO.QTY.DESCRIPTION130333011HOPPER ASSEMBL Y PRO2500230314751CHUTE SWING ADJ 330308531TOP SCREEN PRO2500430317971HARDWARE KIT PRO2500530169341CONTROLLER SPEED 12 VDC, 60 AMP 630306281WIRE HARNESS MAIN730359381KIT POWER CABLE REPLACES 3016943830359351POWER CORD930013791CABLE, SCH BATTERY 14 IN. (RED)10CB150PB 1BREAKER, 150 AMP .1102037001WIRE ASSEMBLY, 36 LONG12149650511HOLD DOWN KIT, SPREADER (4 STRAPS)1330308571TARP PRO25001430331742PIN, CHUTE ATTACHMENT15660504SNAPPER PIN, 1/4 X 2, YLW ZINC 1630360151LABEL SERIAL NUMBER PRO2500ITEMPART NO.QTY.DESCRIPTION130307661HOPPER ASSEMBL Y PRO2500230314751CHUTE SWING ADJ 330308531TOP SCREEN PRO2500430317971HARDWARE KIT PRO2500530169341CONTROLLER SPEED 12 VDC, 60 AMP 630306281WIRE HARNESS MAIN730359381KIT POWER CABLE REPLACES 3016943830359351POWER CORD930013791CABLE, SCH BATTERY 14 IN. (RED)10CB150PB 1BREAKER, 150 AMP .1102037001WIRE ASSEMBLY, 36 LONG12149650511HOLD DOWN KIT, SPREADER (4 STRAPS) BLA 1330308571TARP PRO25001430331742PIN, CHUTE ATTACHMENT 15660504SNAPPER PIN, 1/4X2, YLWZINC 1630360151LABEL SERIAL NUMBER PRO2500231516156891011 121314131556891011121314216。

ColorSource SeriesColorSource ™SpotPhotometry GuideColorSource SpotThrow Distance Multiplier (TDM)To determine the distance from the center of the beam (Origin) to a certain illuminance level at a particular distance, multiply the desired throw distance by the TDM desired on the Iso-Illuminance diagram.Throw Distance (TD) x Throw Distance Multiplier (TDM) = Distance from the Origin (DfO) (distance from the center of the beam)Example: 25 feet (TD) x 0.047 (TDM) = 1.175 feet from center of beam (DfO)foot candleor lux50%10%Iso-Illuminance Diagram(Flat Surface Distribution)T A B L E O F C O N T E N T SCOLORSOURCE SPOT5° (4)10° (4)14° (5)19° EDLT (5)26° EDLT (6)36° EDLT (6)50° LT (7)70° (7)90° (8)15-30° Zoom Narrow (8)15-30° Zoom Mid (9)15-30° Zoom Wide (9)25-50° Zoom Narrow (10)25-50° Zoom Mid (10)25-50° Zoom Wide (11)COLORSOURCE SPOT WITH FRESNEL ADAPTERColorSource Spot with Fresnel adapter - Spot (12)ColorSource Spot with Fresnel adapter - Mid . . . . . . . . . . . . . . . . 12 ColorSource Spot with Fresnel adapter - Flood (13)Iso-Illuminance Diagram(Flat Surface Distribution)% illuminance foot candle or luxIso-Illuminance Diagram(Flat Surface Distribution)Candela Plotfoot candle or lux50%10%Candela Plot10%50%F i e l d A n g leB e a m A n g l e10.7˚11.2˚F i e l d A n g l eB e a m A n g l e7.0˚7.4˚ColorSource Spot 10°ModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 10°242,7204,9854,58216031.2Regulated 3200K 10°218,7314,5224,17211539.3Regulated 5600K10°228,0294,7004,35414133.3Metric Conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 492.7’150.2m Field Diameter 2.0’0.6m 2.9’0.9m 3.9’1.2m 5.9’1.8m – Illuminance (fc)2,4271,079607269.71Illuminance (lux)26,12611,6126,5322,90310.76ColorSource Spot 5°ModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 5°397,5633,9793,76516024.9At 3200K 5°358,2693,6093,42811531.4At 5600K5°373,5003,7523,57714126.6Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 611.9’186.5m Field Diameter 1.3’0.4m 1.9’0.6m 2.6’0.8m 3.9’1.2m – Illuminance (fc)3,7441,664936416.01Illuminance (lux)40,30217,91210,0754,47810.76For field diameter at any distance, multiply distance by 0.129 For beam diameter at any distance, multiply by 0.122foot candle or luxIso-Illuminance Diagram(Flat Surface Distribution)Candela PlotCandela Plot% illuminance foot candle or luxIso-Illuminance Diagram(Flat Surface Distribution)50%10%50%10%F i e l d A n g leB e a m A n g l e19.1˚19.6˚0 1000020000 30000 40000 50000 60000 70000 80000 -10-50 510C a n d e l aDegreesF i e l d A n g l eB e a m A n g l e15.0˚15.4˚ColorSource Spot 19° EDLTModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 19°75,4855,1154,80016032.0At 3200K 19°68,0244,6404,37111540.3At 5600K19°70,9164,8234,56114134.2Metric Conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 274.7’83.7m Field Diameter 3.5’1.1m 5.2’1.6m 6.9’2.1m 10.4’3.2– Illuminance (fc)75533518983.91Illuminance (lux)8,1253,6112,03190310.76ColorSource Spot 14°ModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 14°120,3444,9834,74716031.1At 3200K 14°108,4494,5204,32211539.3At 5600K14°113,0604,6994,51014133.3Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 346.9’105.7m Field Diameter 2.7’0.8m 4.1’1.2m 5.4’1.6m 8.1’2.5m – Illuminance (fc)1,203535301133.71Illuminance (lux)12,9545,7573,2381,43910.76For field diameter at any distance, multiply distance by 0.270 For beam diameter at any distance, multiply by 0.263foot candleor luxIso-Illuminance Diagram(Flat Surface Distribution)Candela Plot% illuminance foot candle or luxIso-Illuminance Diagram(Flat Surface Distribution)Candela Plot50%10%50%10%F i e l d A n g l eB e a m An g l e33.0˚35.2˚F i e l d A n g l eB e a m A n g l e25.1˚26.6˚ColorSource Spot 36° EDLTModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 36°29,0535,8874,77516036.8At 3200K 36°26,1815,3404,34711546.4At 5600K36°27,2945,5514,53714139.4Metric Conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 170.4’52.0Field Diameter 6.3’1.9m 9.5’2.9m 12.7’3.9m 19.0’5.8m – Illuminance (fc)2911297332.31Illuminance (lux)3,1271,39078234710.76ColorSource Spot 26° EDLTModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 26°52,2106,1055,25116038.2At 3200K 26°47,0505,5384,78111548.2At 5600K26°49,0505,7574,98914140.8Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 221.7’67.6m Field Diameter 4.7’1.4m 7.1’2.2m 9.5’2.9m 14.2’4.3m – Illuminance (fc)49221912354.61Illuminance (lux)5,2932,3521,32358810.76For field diameter at any distance, multiply distance by 0.473 For beam diameter at any distance, multiply by 0.445foot candleor luxIso-Illuminance Diagram(Flat Surface Distribution)Candela Plotfoot candle or luxIso-Illuminance Diagram(Flat Surface Distribution)Candela Plot50%10%50%10%F i e l d A n g l eB e a m A n g l e64.8˚72.2˚F i e l d A n g l eB e a m A n g l e46.9˚50.8˚ColorSource Spot 70°ModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 70°9,0056,9403,75716043.4At 3200K 70°8,1156,2963,42011554.7At 5600K70°8,4606,5443,56914146.4Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 94.9’28.9m Field Diameter 14.6’4.4m 21.9’6.7m 29.2’8.9m 43.8’13.3m – Illuminance (fc)90402310.01Illuminance (lux)96943124210810.76ColorSource Spot 50° EDLTModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 50°14,3705,9264,19016037.0At 3200K 50°12,9505,3753,81511546.7At 5600K50°13,5015,5883,98114139.6Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 119.9’36.5m Field Diameter 9.5’2.9m 14.2’4.3m 19.0’5.8m 28.5’8.7m – Illuminance (fc)144643616.01Illuminance (lux)1,54768738717210.76For field diameter at any distance, multiply distance by 0.950 For beam diameter at any distance, multiply by 0.868Candela PlotIso-Illuminance Diagram(Flat Surface Distribution)% illuminance foot candle or luxor luxIso-Illuminance Diagram(Flat Surface Distribution)Candela Plot50%10%50%10%F i e l d A n g l eB e a m A n g l e15.4˚17.4˚F i e l d A n g l eB e a m A n g l e70.2˚88.8˚ColorSource Spot 15-30° Zoom NarrowModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 15°98,3314,6893,71216029.3At 3200K 15°88,6124,2543,38011537.0At 5600K15°92,3794,4223,52714131.4Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 313.6’95.6m Field Diameter 3.1’0.9m 4.6’1.4m 6.1’1.9m 9.2’2.8m – Illuminance (fc)983437246109.31Illuminance (lux)10,5844,7042,6461,17610.76ColorSource Spot 90°ModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 90°6,8946,7923,14016042.4At 3200K 90°6,2126,1612,85911553.6At 5600K90°6,4766,4052,98314145.4Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 83.0’25.3m Field Diameter 19.6’6.0m 29.4’9.0m 39.2’11.9m 58.5’17.9m – Illuminance (fc)6931177.71Illuminance (lux)7423301868210.76For field diameter at any distance, multiply distance by 1.959 For beam diameter at any distance, multiply by 1.406foot candleor luxIso-Illuminance Diagram(Flat Surface Distribution)Candela Plotfoot candle or luxIso-Illuminance Diagram(Flat Surface Distribution)Candela Plot50%10%50%10%F i e l d A n g l eB ea m A n g l e28.2˚32.8˚F i e l d A n g l eB e a m A n g l e22.9˚25.3˚ColorSource Spot Lustr 15-30° Zoom WideModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 30°32,5205,0833,68216031.8At 3200K 30°29,3064,6113,35311540.1At 5600K30°30,5524,7933,49814134.0Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 180.3’55.0m Field Diameter 5.9’1.8m 8.8’2.7m 11.8’3.6m 17.7’5.4m – Illuminance (fc)3251458136.11Illuminance (lux)3,5001,55687538910.76ColorSource Spot 15-30° Zoom MidModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 23°54,6945,3684,10916033.6At 3200K 23°49,2884,8703,74111542.3At 5600K23°51,3845,0623,90414135.9Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 233.9’71.3m Field Diameter 4.5’1.4m 6.7’2.1m 9.0’2.7m 13.5’4.1m – Illuminance (fc)54724313760.81Illuminance (lux)5,8872,6171,47265410.76For field diameter at any distance, multiply distance by 0.449 For beam diameter at any distance, multiply by 0.405% illuminance foot candle or luxIso-Illuminance Diagram(Flat Surface Distribution)Candela Plot% illuminance foot candle or luxIso-Illuminance Diagram(Flat Surface Distribution)Candela Plot50%10%50%10%F i e l d A n g l eB e a m A n g l e36.4˚37.8˚F i e l d A n g l eB e a m A n g l e28.4˚28.9˚ColorSource Spot 25-50° Zoom MidModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 37°26,9036,6355,62116041.5At 3200K 37°24,2446,0195,11811552.3At 5600K37°25,2746,2575,34114144.4Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 164.0’50.0m Field Diameter 6.8’2.1m 10.3’3.1m 13.7’4.2m 20.5’6.3m – Illuminance (fc)2691206729.91Illuminance (lux)2,8961,28772432210.76ColorSource Spot 25-50° Zoom NarrowModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 25°41,6246,2695,85016039.2At 3200K 25°37,5105,6875,32711549.5At 5600K25°39,1045,9125,55814141.9Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 204.0’62.2m Field Diameter 5.2’1.6m 7.7’2.4m 10.3’3.1m 15.5’4.7m – Illuminance (fc)41618510446.21Illuminance (lux)4,4801,9911,12049810.76For field diameter at any distance, multiply distance by 0.515 For beam diameter at any distance, multiply by 0.506foot candleor luxIso-Illuminance Diagram(Flat Surface Distribution)Candela Plot50%10%F i e l d A n g l eB e a m A n g l e42.2˚48.3˚ColorSource Spot 25-50° Zoom WideModeDegree Candela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 50°17,8506,5674,30316041.0At 3200K 50°16,0865,9573,91811551.8At 5600K50°16,7706,1924,08814143.9Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply footcandles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 133.6’40.7m Field Diameter 9.0’2.7m 13.5’4.1m 17.9’5.5m 26.9’8.2m – Illuminance (fc)179794519.81Illuminance (lux)1,92185448021310.76For field diameter at any distance, multiply distance by 0.897 For beam diameter at any distance, multiply by 0.772Iso-Illuminance Diagram(Flat Surface Distribution)Candela PlotIso-Illuminance Diagram(Flat Surface Distribution)Candela Plotfoot-candleor lux50%10%foot-candle or lux50%10%ColorSource Spot with Fresnel Adapter - MidModeCandela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 33,2686,2904,21116039.3At 3200K 30,1505,7013,81611549.6At 5600K31,4125,9393,97614142.1Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply foot-candles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 182.4’55.6m Field Diameter 7.4’2.2m 11.1’3.4m 14.8’4.5m 22.1’6.7m – Illuminance (fc)3331488337.0 1.0Illuminance (lux)3,5811,59289539810.76For field diameter at any distance, multiply distance by 0.738 For beam diameter at any distance, multiply by 0.497ColorSource Spot with Fresnel Adapter - SpotModeCandela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 72,7844,4592,29716027.9At 3200K 65,9624,0412,08211535.1At 5600K68,7224,2102,16914129.9Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply foot-candles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 269.8’82.2m Field Diameter 4.6’1.4m 7.0’2.1m 9.3’2.8m 13.9’4.2m – Illuminance (fc)72832318280.9 1.0Illuminance (lux)7,8343,4821,95987010.76For field diameter at any distance, multiply distance by 0.464 For beam diameter at any distance, multiply by 0.251F i e l d A n g l eB e a m A n g l e14.3°26.1˚F ie l d A n g l eB e a m A n g l e27.9°40.5˚Iso-Illuminance Diagram(Flat Surface Distribution)Candela Plotfoot-candle or lux50%10%ColorSource Spot with Fresnel Adapter - FloodModeCandela Field Lumens Beam Lumens Power ConsumptionEfficacy (lpw)Maximum Output 11,2846,4754,29216040.5At 3200K 10,2275,8683,88911551.0At 5600K10,6556,1134,05214143.4Metric conversions: F or meters, multiply feet by 0.3048For lux, multiply foot-candles by 10.76Throw Distance (d)10’3.0m 15’4.6m 20’6.1m 30’9.1m 106.2’32.4m Field Diameter 13.6’4.1m 20.4’6.2m 27.2’8.3m 40.8’12.4m – Illuminance (fc)113502812.5 1.0Illuminance (lux)1,21554030413510.76For field diameter at any distance, multiply distance by 1.359 For beam diameter at any distance, multiply by 0.965F i e l d A n g l eB e a m A n g l e51.5°68.4˚Corporate Headquarters • 3031 Pleasant View Rd, PO Box 620979, Middleton WI 53562 0979 USA • Tel +1 608 831 4116 • Fax +1 608 836 1736London, UK • Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK • Tel +44 (0)20 8896 1000 • Fax +44 (0)20 8896 2000Rome, IT • Via Pieve Torina, 48, 00156 Rome, Italy •Tel +39 (06) 32 111 683 • Fax +44 (0)20 8752 8486Holzkirchen, DE • Ohmstrasse 3, 83607 Holzkirchen, Germany • Tel +49 (80 24) 47 00-0 • Fax +49 (80 24) 47 00-3 00Hong Kong • Room 1801, 18/F , Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong • Tel +852 2799 1220 • Fax +852 2799 9325Web • • Copyright©2015 ETC. All Rights Reserved. All product information and specifications subject to change. 7413L1003 Rev. A USA 06/2015US and International patents pending。

Nikon D3100 Black 14 Megapixel Digital SLR CameraProduct DetailsNikon Black 14 Megapixel Digital SLR Camera - D3100Beautiful pictures–Amazing movies–Incredibly Easy with the 14 Megapixel DX sensor and learn-as-you-grow Guide Mode. Features:∙14.2 Megapixel DX-format CMOS Image Sensor delivers beautiful photographs and prints well beyond 20 x 30 inches.∙Full 1080p HD Cinematic Video with full-time autofocus and sound lets you record cinematic-quality movies in Full 1080p HD format (1920 x 1080 pixels).∙Easy-To-Use—Featuring Nikon’s Guide Mode with intuitive controls and on-board assistance helping you take better pictures every step of the way.∙Fast 11-point Autofocus System delivers razor-sharp pictures.∙3-in. monitor with One-Touch Live View shooting and movie capture.∙Built-in HDMI port lets you connect directly to your HDTV using an optional HDMI cable∙Control Image and Movie Playback with most HDTV remote controls∙ 6 Automatic Exposure Scene Modes Just set the Mode dial to Portrait, Landscape, Child, Sports, Close-up or Night Portrait for stunning results in otherwise challenging conditions.∙Picture Control lets you choose from Standard, Neutral, Vivid, Monochrome, Portrait, or Landscape to apply a personal look and feel to your pictures.∙Built-in pop-up flash for those times when there isn’t enough light∙Includes 3x 18-55mm Zoom-NIKKOR VR Image Stabilization Lens with legendary NIKKOR optical quality and fast, accurate autofocus for vivid color, striking contrast and crisp detail and VR image stabilization to ensure thesharpest hand-held pictures and movies.∙Compact and Lightweight Design Beautifully styled—Ready to go wherever life takes you.∙Split-second Shutter Response eliminates the frustration of shutter delay, capturing moments that other cameras miss.∙ISO sensitivity 100-3200, expandable to ISO 12800 equivalent delivers exceptional results, even in the most challenging low-light situations.∙Scene Auto Selector lets the D3100 decide the best mode to match the shooting situation when using Live View.∙EXPEED 2 Nikon’s new image processing engine assures breathtakingly rich image quality, managing color, contrast, exposure, noise and speed.∙Scene Recognition System in Live View automatically optimizes exposure, autofocus, and white balance, allowing you to obtain beautiful photos without the hassle of making complicated camera adjustments yourself.∙Active D-Lighting restores picture-enhancing detail in shadows and highlights.∙Automatic Image Sensor Cleaning uses an ultrasonic process and exclusive Airflow Control combats the accumulation of dust in front of the image sensor, safeguarding image quality shot after shot.∙In-camera Image Editing allows creative freedom, without the need for a computer, offering easy editing functions.∙EN-EL14 Battery∙MH-24 Battery Charger∙DK-5 Eyepiece Cap∙DK-20 Rubber Eyecap∙AN-DC3 Camera Strap∙BS-1 Accessory Shoe Cover∙BF-1B Body Cap∙ViewNX 2 CD-ROM∙Type Single-lens reflex digital camera∙Lens Mount Nikon F bayonet mount∙Picture Angle Effective picture angle 1.5x (Approx.) conversion factor (Nikon DX format)∙Effective Pixels 14.2 million∙Sensor Size 23.1 x 15.4mm∙Image Sensor Format DX∙Image Sensor Type CMOS∙Total Pixels 14.8 million∙Dust-reduction systemo Image sensor cleaningo Airflow Control Systemo Image Dust Off reference data (optional Capture NX 2 software required)∙Image Area (pixels)o DX-formato(L) 4608 x 3072o(M) 3456 x 2304o(S) 2304 x 1536∙File Formato NEF (RAW)o JPEG: JPEG-Baseline compliant with fine (approx 1:4), normal (approx 1:8), or basic (approx 1:16) compressiono NEF (RAW) + JPEG: Single photograph recorded in both NEF (RAW) and JPEG formats∙Picture Controlo Standardo Neutralo Vivido Monochromeo Portraito Landscapeo Selected Picture Control can be modified∙Storage Mediao SDo SDHCo SDXC memory cards∙File Systemo Compliant with DCF (Design Rule for Camera File System) 2.0o DPOF (Digital Print Order Format)o EXIF 2.21 (Exchangeable Image File Format for Digital Still Cameras)o PictBridge∙Viewfinder Eye-level pentamirror single-lens reflex viewfinder∙Viewfinder Frame Coverageo95% horizontalo95% vertical Approx.∙Viewfinder Magnification 0.80x (50mm f/1.4 lens at infinity; -1.0m¯¹) Approx.∙Viewfinder Eyepoint 18mm (-1.0m¯¹)∙Viewfinder Diopter Adjustment -1.7 to +0.5m¯¹∙Focusing Screen Type B BriteView Clear Matte Mark VII screen∙Reflex Mirror Quick-return type∙Lens Aperture Instant-return type electronically controlled∙Compatible Lenseso AI-P NIKKOR: All functions supported except autofocus and 3D Color Matrix Metering IIo AF-S, AF-I: All functions supportedo Non-CPU: Can be used in mode M, but exposure meter does not function; electronic range finder can be used if maximum aperture is f/5.6 or fastero IX Nikkor lenses cannot be usedo Electronic Rangefinder usable with lens with maximum aperture of f/5.6 or fastero Type G or D AF NIKKOR not equipped with an autofocus motor: All functions supported except autofocus o AF-NIKKOR for F3AF not supportedo Other AF NIKKOR: All functions supported except autofocus and 3D color matrix metering IIo Type D PC NIKKOR: All functions supported except autofocus and some shooting modes.∙Shutter type Electronically controlled vertical-travel focal-plane∙Shutter Speedo1/4000 to 30 sec. in steps of 1/3 EVo Bulb∙Flash Sync Speedo Up to 1/200 sec.o Synchronizes with shutter at 1/200s or slower∙Shutter Release Modeso Single-frame [S] modeo Continuouso Self-timer modeo Quiet Shutter Release∙Frame Advance Rate Up to 3 fps (manual focus, mode M or S, shutter speed 1/250 sec or faster, and other settings at default values)∙Self-timero 2 sec.o10 sec.∙Timer duration electronically controlled∙Exposure Metering System TTL exposure metering using 420-pixel RGB sensor∙Metering Methodo Matrix: 3D color matrix metering II (type G and D lenses); color matrix metering II (other CPU lenses)o Center-weighted: Weight of 75% given to 8-mm circle in center of frameo Spot: Meters 3.5-mm circle (about 2.5% of frame) centered on selected focus point∙Metering Rangeo0 to 20 EV (Matrix or center-weighted metering at ISO 100 equivalent, f/1.4 lens, at 20°C/68°F)o 2 to 20 EV (Spot metering at ISO 100 equivalent, f/1.4 lens at 20°C/68°F)∙Exposure Meter Coupling CPU∙Exposure Modeso Auto modes ( auto, auto [flash off])o Scene Modeso Programmed Auto with flexible Program (P)o Shutter-Priority Auto (S)o Aperture-Priority Auto (A)o Manual (M)∙Scene Modeso Portraito Landscapeo Childo Sportso Close-upo Night Portrait∙Exposure Compensation ±5 EV in increments of 1/3EV∙Exposure Lock Luminosity locked at detected value with AE-L/AF-L button∙ISO Sensitivityo ISO 100 to 3200 in steps of 1 EVo Can also be set to approx. 1 EV above ISO 3200 (ISO 6400 equivalent) or to approx. 2 EV above ISO 3200 (ISO 12800 equivalent)o Auto ISO sensitivity control available∙Expanded ISO Sensitivity Optionso 1 EV above ISO 3200 (ISO 6400 equivalent)o 2 EV above ISO 3200 (ISO 12800 equivalent) Approx.o Auto ISO sensitivity control available∙Active D-Lightingo Ono Off∙Auto-area AF Modeo Single Area AFo Dynamic-areao Auto-area AFo3D-tracking (11 points)∙Autofocus System Nikon Multi-CAM 1000 autofocus sensor module with TTL phase detection∙Detection Range -1 to 19 EV (ISO 100, 68°F/20°C)∙Lens Servo Autofocus (AF): Single-servo AF (AF-S); continuous-servo AF (AF-C); auto AF-S/AF-C selection (AF-A); predictive focus trackinga ctivated automatically according to subject status∙Focus Point Can be selected from 11 focus points∙Focus Locko Focus can be locked by pressing shutter-release button halfway (single-servo AF)o Focus can be locked by pressing AE-L/AF-L button∙Built-in Flasho Yeso Autoo Portraito Childo Close-Upo Night portraito Auto flash with auto pop-up [P], [S], [A], [M]o Manual pop-up with button release∙Guide Number 39/12, 43/13 with manual flash (ft/m, ISO 100, 68°F/20°C)Approx.∙Flash Controlo TTL: i-TTL ballanced fill-flash and standard i-TTL flash for digital SLR using 420-pixel RGB sensor are available with built-in flash adn SB-900, SB-800, SB-600, or SB-400 (i-TTL balanced fill-flash availablewhen matrix or center-weighted metering) Auto aperture: Available with SB-900/SB-800 and CPU lens o Non-TTL auto: Supported flash units include BS-900, SB-800, SB-80DX, SB-28DX, SB-28, SB-27, and SB-22So Distance-priority manual: Available with SB-900 and SB-800∙Flash Modeo Autoo Auto with red-eye reductiono Fill-flasho Auto slow synco Auto slow sync with red-eye correctiono Rear curtain with slow sync∙Flash Compensation -3 to +1 EV in increments of 1/3 EV∙Flash-ready indicatoro Lights when built-in flash or optional flash unit such as SB-900, SB-800, SB-600, SB-400, SB-80DX, SB-28DX or SB-50DX is fully chargedo Blinks for 3 sec. after flash is fired at full output∙Accessory Shoe ISO 518 hot-shoe with sync and ata contacts and safety lock∙Nikon Creative Lighting System (CLS) Yeso Advanced Wireless Lighting supported with SB-900, BS-800, SU-800 as commander; Flash Coloro Information Communications supported with built-in flash and all CLS-compatible flash units∙Flash Sync Terminal Sync Terminal Adapter AS-15 (available separately)∙White Balanceo Autoo Incandescento Fluorescent (7 types)o Direct Sunlighto Flasho Cloudyo Shadeo Preset Manualo All except preset manual with fine tuning∙Live View Shooting Yes∙Live View Lens servoo Autofocus (AF): Single-servo AF (AF-S); full-time-servo AF (AF-F)o Manual focus (MF)∙Live View AF-area modeo Face-priority AFo Wide-area AFo Normal-area AFo Subject-tracking AF∙Live View Autofocus Contrast-detect AF anywhere in frame (camera selects focus point automatically when face-priority AF or subejct-tracking AF is selected∙Live View Scene Auto Selectoro Aut modeo Auto (flash off) mode∙Movie Metering TTL exposure metering using main image sensor∙Movie Metering method Matrix∙Movie Frame size (pixels) and frame rateo1920 x 1080 (24p): 24 fps (23.976 fps)o1280 x 720 (30p): 30 fps (29.97 fps)o1280 x 720 (25p): 25 fpso1280 x 720 (24p): 24 fps (23.976 fps)o640 x 424 (24p): 24 fps (23.976 fps)∙Movie Maximum recording time 10 min.∙Movie File Format MOV∙Movie Audio recording format Linear PCM∙Movie Audio recording device Built-in monaural microphone∙Monitor Size 3 in. diagonal∙Monitor Resolution 230,000 Dots∙Monitor Type TFT-LCD with bridghtenss adjustment∙Playback Functionso Full frameo Calendaro Thumbnail (4, 9 or 72 images)o Zoomo Movie Playbacko Slideshowo Histogram displayo Highlightso Auto image rotationo Image Comment (up to 36 characters)o Highlight point display∙Interfaceo Hi-speed USBo Video output: NTSC, PALo HDMI output: Type C mini-pin HDMI connectoro Accessory terminal: Remote cord: MC-DC2 (available separately); GPS unit: GP-1 (available separately) ∙GPS GP-1 GPS unit∙Supported Languageso Chinese (Simplified and Traditional)o Dutcho Englisho Spanisho Finnisho Frencho Italiano Germano Japaneseo Koreano Polisho Portugueseo Russiano Swedisho Czecho Norweigono Turkish∙Battery / Batteries EN-EL14 Rechargeable Li-ion Battery∙AC Adaptero EH-5a AC Adaptero Power Connector EP-5a available separately∙Tripod Socket ¼ in. (ISO1222)∙Operating Environmento32 to 104°F (0 to 40°C)o Less than 85% (no condensation)∙Width: 4.9"∙Height: 3.8"∙Depth: 2.9"∙Unit: 1 lb∙Shipping: 2 lbs。