TDS_Irganox_1076_Chinese

0843

PAGE 1 OF 24 LIQUID ASSAYED CHEMISTRY CONTROL PREMIUM PLUS - LEVEL 1 (LIQ CHEM ASY PREMIUM PLUS 1) Cat. No. LAL 4213 Lot No. 153UL Size: 12 x 5 ml Expiry: 2015-02 INTENDED USE This product is intended for in vitro diagnostic use, in the quality control of diagnostic assays. The Liquid Assayed Chemistry Control Premium Plus is for the control of accuracy. DEVICE DESCRIPTION The Liquid Assayed Chemistry Control Premium Plus is supplied at 3 levels, level 1, 2 and 3. Target values and ranges are supplied for the analytes listed in the values section at all three levels. SAFETY PRECAUTIONS AND WARNINGS For in vitro diagnostic use only. Do not pipette by mouth. Exercise the normal precautions required for handling laboratory reagents. Human source material from which this product has been derived has been tested at donor level for the Human Immunodeficiency Virus (HIV 1, HIV 2) antibody, Hepatitis B Surface Antigen (HbsAg), and Hepatitis C Virus (HCV) antibody and found to be NON-REACTIVE. FDA approved methods have been used to conduct these tests. However, since no method can offer complete assurance as to the absence of infectious agents, this material and all patient samples should be handled as though capable of transmitting infectious diseases and disposed of accordingly. Health and Safety Data Sheets are available on request. STORAGE AND STABILITY OPENED: Store refrigerated (+2ºC to + 8ºC). Thawed serum is stable for 7 days at +2ºC to +8ºC, with the following exceptions: Troponin T is stable for 3 days at +2ºC to +8ºC. Only the required amount of product should be removed. After use, any residual product should NOT BE RETURNED to the original vial. UNOPENED: Store frozen at -20ºC to -70ºC. Stable to expiration date printed on individual vials (see Limitations). LIMITATIONS For Total Acid Phosphatase, the material should be stabilised by adding 1 drop (25 µl – 30 µl) of 0.7M Acetic acid solution to 1ml of the serum after thawing. After stabilisation, Total Acid Phosphatase is stable for 7 days at +2ºC to +8ºC. Bilirubin in the serum is light sensitive and it is recommended that the serum is stored in the dark. ALT, Total Acid Phosphatase, Alkaline Phosphatase, Total and Direct Bilirubin values may gradually decrease during the products shelf life. Bacterial contamination of the thawed serum will cause reductions in the stability of many components. The control should not be used as a calibration material. PREPARATION 1. Allow the frozen control to thaw at room temperature (+15ºC to +25ºC) until completely thawed. Swirl the contents to ensure homogeneity. 2. Refer to the Control section of the individual analyser application. 3. Refrigerate any unused material. Prior to reuse, mix contents thoroughly. MATERIALS PROVIDED Liquid Assayed Chemistry Control Premium Plus - Level 1 12 x 5 ml MATERIALS REQUIRED BUT NOT PROVIDED None ASSIGNED VALUES Each lot of serum is submitted to a number of external laboratories. Values are assigned from a consensus of results obtained by these laboratories and internal testing conducted at Randox Laboratories Ltd. With each batch, a control range is provided for individual parameters and each parameter method. If an instrument specific value is not available, refer to the Mean of all Instruments section. If necessary, contact Randox Laboratories – Customer Technical Services, Northern Ireland, Tel: +44 (0) 28 9445 1070 or email Technical.Services@ 29 Nov 13 rw

AdditivesValue beyond chemistryEnhanced Processing and Service Life

for Polyurethane ProductsAdditives for Polyurethane

1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Polymer Degradation and Stabilization . . . . . . . . . . . . . . . . . . . . . . . .4

Thermo-oxidative Degradation . . . . . . . . . . . . . . . . . . . . . . .4

Antioxidants Interrupt the Degradation Process . . . . . . . . . . .5

Photodegradation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Light Stabilizers Counter Photodegradation . . . . . . . . . . . . . .7

Additives for Polyurethane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Thermoplastic Polyurethane (TPU) . . . . . . . . . . . . . . . . . . . .9

DCBP硫化剂

2,4-二氯过氧化苯甲酰(硫化剂DCBP) [英]2,4-DICHLOROBENZOYL PEROXIDE

双二四-[双(2, 4-二氯苯甲酰)过氧化物DCBP]

产品简介 »

是硅橡胶的良好的硫化剂，也可用于EPDM、热塑性弹性体的硫化。安全的处理温度为75℃，硫化温度为90℃，推荐用量1.1-2.3％。

英文名称：Di（2，4-dichlorobenzoyl）peroxide

分子量：380.0

理论活性氧含量：4.21％

CAS No.：133-14-2

Einecs：205-094-9

技术标准

外观：白色煳状物

含量：≥50.0±1.0％

水份：1.5％max

半衰期（氯苯溶液中测得）：

0.1小时：80℃

1小时：65℃

10小时：47℃

推荐的贮存温度：TS：30℃

热稳定性数据：自加速分解温度（SADT）：60℃

危急温度（Tem）：55℃

主要分解产物：CO2、1，3-二氯苯、2，4-二氯苯、微量的双2，4-二氯苯等

包装：DCBP的标准包装是净重20公斤的纤维纸筒，内塑料袋包装。也可按用户的要求的规格包装。DCBP为D类固体有机过氧化物，货物分类：5.2，联合国编号：3106，二类危险货物包装。

安全注意事项：

（1）远离火种、明火和热源。

（2）避免接触还原剂（如胺类）、酸、碱和重金属化合物（如促进剂、金属皂等）

（3）请参照本产品的安全数据表（MSDS）。

贮存条件：保持包装密闭并处于良好通风状态下，最大贮存温度为30℃，避免和还原剂如胺类、酸、碱、重金属化合物（促进剂及金属皂），严禁在库房内分装及取用。

贮存稳定性：按厂家提示的条件进行保存，产品在三个月内可保证出厂技术标准。

灭火：小的火灾需用干粉或二氧化碳灭火器灭火，同时用大量水喷洒，防止再燃。大火需在安全距离之外用大量水喷射

Lovibond® Water Testing

Tintometer®

Group

SensoDirect 150（套件 1）pH/Con/TDS/Oxi/Temp.

ph /Redox、 电导率、溶解氧气等

一体化

大型 LCD 显示屏

防护板

货号: 724200

一个设备中的多个参数

SensoDirect 150 将多个手持式仪器的应用结合在一台仪器中。它采用多功能装置的设计，用于测定 pH、氧化还原值、氧气、电导率和TDS。

直观的用户指导

在大型 LCD 显示屏上方便读取所有测量值。

可采用不同的参数组合

可使用组合 pH + Con + TDS + Oxi、pH + Con + TDS、pH + Oxi 和pH +氧化还原。选择权由您掌握。行业

NGO | 其他行业 | 市政 | 海洋工业

应用

冷却水 | 污水处理 | 泳池水处理 | 泳池水质控制 | 锅炉水 | 饮用水处理

SensoDirect 150（套件 1）pH/Con/TDS/Oxi/

Temp.

多参数手持式仪器，用于测定溶解氧 (O2)、O2 浓度、电导

率、TDS、pH 和 ORP。测量范围

Test Name测量范围Conductivity0 - 200 µS/cmConductivity0.2 - 2.000 mS/cmConductivity2 - 20 mS/cmConductivity20 - 200 mS/cmOxygen0 - 20 mg/L O2pH0 - 14TDS0 - 132 ppmTDS132 - 1320 ppmTDS1320 - 13200 ppmTDS13200 - 132000 ppm

Temperature0 - 60 ° CTechnical Data

显示大屏 LCD 显示器，可调节对比度Auto – OFF是电源DC 1,5 V 电池 (UM3,AA)DC 9 V 适配器便携性手提保护等级IP 51一致性CE尺寸120 x 40 x 220 mm带包装的重量(unit incl. batteries)