PL34120191000MXEX中文资料

63x 2Mb Trib 1 Generic Trib 1 63x 2Mb Trib 2
Generic Trib 1 PSU/LTU 2Mb Trib LTU 2a (ports 1-21) 2Mb Trib LTU 2b (ports 22-42) 2Mb Trib LTU 2c (ports 43-63) Generic Trib 2 PSU/LTU 2Mb Trib LTU 3a (ports 1-21)
2M PDH Trib 3 LTU area (63-ports)
63x 2Mb Trib 3 Generic Trib 3 63x 2Mb Trib 4 Generic Trib 4 Generic Trib 5 (Expansion) Generic Trib 6 (Expansion) Generic Trib 7
辅助单元提供 2个外部时钟输入接口（T3） 2个外部时钟输出接口（T4） 1个网管接口 1个 2M PDH业务测试口 2个辅助数据接口（64K V.11） Bw7R 告警指示：4个外部用户告 警输出接口和6个外部用户告警 输入接口
核心64 x 2M支路卡
保护64 x 2M支路卡
当水平安装或配置了L2卡 时要使用风扇单元 TRAINING SERVICES
SLIDE NUMBER 8
保护机制
SMA1/4 UC STM-1&4 核心线路 STM-1支路 STM-4支路 N/A VC-1/2/3/4, VC-YXv Yes Yes 1:1 1:1 1:1 SMA16 UC STM-16 & 4 核心线路 STM-1支路 STM-4支路 STM-16 & 4 核心线路 VC-1/2/3/4, VC-YXv Yes Yes 1:1 1:1 1:1 SMA1/4 EX STM-1&4 核心线路 STM-1支路 STM-4支路 N/A VC-1/2/3/4, VC-YXv Yes Yes 1 组 1:n (n 4) 多组 1:n (n 4) 多组 1:n (n 4) SMA16 EX STM-16 & 4 核心线路 STM-1支路 STM-4支路 STM-16 & 4 核心线路 VC-1/2/3/4, VC-YXv Yes Yes 1 组 1:n (n 4) 多组 1:n (n 6) 多组 1:n (n 6)

Extract from the onlinecatalogFKC 2,5/ 9-STOrder No.: 1910429The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1910429Plug component, nominal current: 12 A, rated voltage: 250 V, pitch: 5.0 mm, no. of positions: 9, type of connection: Spring-cage connectionhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 5 mmDimension a30 mmNumber of positions7Technical dataInsulating material group IRated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/2)320 V Rated voltage (II/2)630 V Connection in acc. with standard EN-VDE Nominal current I N12 A Nominal voltage U N250 V Nominal cross section 2.5 mm2 Maximum load current12 A Insulating material PA Inflammability class acc. to UL 94V0 Internal cylindrical gage A2 Stripping length10 mmConnection dataConductor cross section solid min.0.2 mm2 Conductor cross section solid max. 2.5 mm2 Conductor cross section stranded min.0.2 mm2 Conductor cross section stranded max. 2.5 mm2 Conductor cross section stranded, with ferrule0.25 mm2 without plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2 without plastic sleeve max.Conductor cross section stranded, with ferrule0.25 mm2 with plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2 with plastic sleeve max.Conductor cross section AWG/kcmil min.24 Conductor cross section AWG/kcmil max122 conductors with same cross section, stranded,0.5 mm2 TWIN ferrules with plastic sleeve, min.2 conductors with same cross section, stranded,1.5 mm2 TWIN ferrules with plastic sleeve, max.Certificates / ApprovalsApproval logoCSANominal voltage U N300 VNominal current I N10 AAWG/kcmil24-12CULNominal voltage U N300 VNominal current I N10 AAWG/kcmil26-12ULNominal voltage U N300 VNominal current I N10 AAWG/kcmil26-12Certification CB, CSA, CUL, GOST, UL, VDE-PZIAccessoriesItem Designation DescriptionAssembly1876880STZ 8-FKC-5,08Strain relief for snapping into the latching chambers of the plugcomponents, 8-pos.1876877STZ 4-FKC-5,08Strain relief for snapping into the latching chambers of the plugs,4-pos.Marking0804183SK 5/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocksPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating material0201744MPS-MT Test plug, consisting of: Metal part for 2.3 mm diameter sockethole0201647RPS Reducing plug, for transition from 4 mm diameter test plug socket,insulation: grayTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalAdditional productsItem Designation DescriptionGeneral0707154DFK-MSTB 2,5/ 7-G Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.0mm, no. of positions: 7, mounting: Direct mounting1899896EMSTBA 2,5/ 7-G Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: press in1914904EMSTBVA 2,5/ 7-G Header, nominal current: 12 A, rated voltage: 200 V, pitch: 5.0mm, no. of positions: 7, mounting: press in1762745MDSTB 2,5/ 7-G1Header, nominal current: 10 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1846564MDSTBA 2,5/ 7-G Header, nominal current: 10 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1762897MDSTBV 2,5/ 7-G1Header, nominal current: 10 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1845837MDSTBVA 2,5/ 7-G Header, nominal current: 10 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1754533MSTB 2,5/ 7-G Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1768231MSTB 2,5/ 7-G-LA Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1755493MSTBA 2,5/ 7-G Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1770533MSTBA 2,5/ 7-G-LA Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1753534MSTBV 2,5/ 7-G Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1755561MSTBVA 2,5/ 7-G Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1736069MSTBW 2,5/ 7-G Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1769285SMSTB 2,5/ 7-G Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: Soldering1769858SMSTBA 2,5/ 7-G Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.0mm, no. of positions: 7, mounting: SolderingDrawingsDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

线性调整率与负载调整率：
Efficiency(%) Output voltage(V)
Efficiency VS Load current
100
95
90
85
80
75
70
VIN=8V,VOUT=5V,IOUT=0.1A~4A
65
VIN=12V,VOUT=5V,IOUT=0.1A~4A
VIN=24V,VOUT=5V,IOUT=0.1A~4A
5.070
3.8
5.072
4.0
EFF(%) 53.67 63.43 73.50 77.60 80.40 81.72 82.62 82.96 83.51 83.69 83.84 83.99 84.12 84.05 84.15 83.40 83.54 83.39 83.28 83.29 83.07
转换效率：
版 本：1.1 页 数：第 4 页， 共 6 页
DEMO 实物图
PCB 布局
30mm
40mm
顶层
底层
应用信息
输入电容选择 在连续模式中，转换器的输入电流是一组占空比约为 VOUT/VIN 的方波。为了防止大的瞬态电压，必须采用针对 最大 RMS 电流要求而选择低 ESR(等效串联电阻)输入电容器。对于大多数的应用，1 个 10uF 的输入电容器就足够了, 它 的放置位置尽可能靠近 XL4013 的位置上。最大 RMS 电容器电流由下式给出：
5.057
0.1
5.056
0.2
5.058
0.4
5.058
0.6
5.057
0.8
5.057
1.0
5.057
1.2
5.058

u 4 microphone / line inputs, plus music source inputu Announcement only output, 3‑wire volume overrideu Wide range of output power (60, 120 and 240Watts)u2‑tone chimeThese Plena Economy mixer amplifiers areprofessional public address units with modernstate‑of‑the‑art features. They are easy to use, takingthe complexity away from the user and putting itwhere it belongs, inside the equipment. Providing acrisp call or clear music is as easy as turning on theradio. Offering the essentials of public address in anaffordable package.FunctionsMicrophone and line inputsAll Mic/line inputs can be switched betweenmicrophone level and line level sensitivity. The inputsare balanced but can be used unbalanced. Phantompower can be switched on to provide power tocondenser microphones.Input channel 1 can take priority over all othermicrophone and music inputs:•Input 1 can be activated by contact closure on thePTT (push to talk). A 2-tone chime can be configuredto precede an announcement.Music inputA separate music input is available with its volumecontrol.Personalized settingsMore unique features are available such as adetachable label where the user can write the namesfor inputs. This label can then be mounted on thefront, protected by the clear window.Another useful feature is to indicate preferred settingson the front panel by inserting colored pins at thepreset levels of all knobs. You can then instruct a userto set all the controls to the silver pins to configurethe system for their particular use. A second user canset all controls to the red pins for their configuration.PowerThe mixer amplifiers come in 60, 120 and 240 Wattoutput power. This power is directly available on 100 V(70 V for US versions) constant voltage connectionsand on a low impedance connection for a 4 ohm load.Moreover, the amplifiers have a separate 100 V (70 Vfor US versions) call-only output channel foraddressing areas where only priority announcementsare required. The call-only output can also be used for3-wire remote, volume control override.Output statusAn LED VU meter monitors the master output. A headphone socket, below the VU meter, provides the mixer output. For total reliability and ease of use, a limiter is integrated into the output stage to restrict output if the user applies too much signal.Controls and indicatorsFront•On/off switch•Power on LED•LED VU meter for master output (LEDs for -18, -12 -6, -3, 0 dB)•Master volume knob•Four volume knobs for microphone inputs •Volume knob for background music•Knob for treble level•Knob for bass level•Headphone socketBack•Dip switchesParts includedQuantity Components1PLE-1MExx0‑xx Plena Mixer Amplifier1Power cord1Manual1Plena Easy Line CDTechnical specificationsElectricalLoudspeaker outputMechanicalEnvironmentalOrdering informationPLE‑1ME060‑EU Plena Mixer AmplifierMixer amplifier, 60 W, 4 microphones and background music (BGM) input.Order number PLE-1ME060-EUPLE‑1ME120‑EU Plena Mixer AmplifierMixer amplifier, 120 W, 4 microphones and background music (BGM) input.Order number PLE-1ME120-EUPLE‑1ME240‑EU Plena Mixer AmplifierMixer amplifier, 240 W, 4 microphones and background music (BGM) input.Order number PLE-1ME240-EUPLE‑1ME060‑US Plena Mixer AmplifierMixer amplifier, 60 W, 4 microphones and3 background music (BGM) inputs. US version.Order number PLE‑1ME060‑US PLE‑1ME120‑US Plena Mixer AmplifierMixer amplifier, 120 W, 4 microphones and3 background music (BGM) inputs. US version. Order number PLE‑1ME120‑USPLE‑1ME240‑US Plena Mixer AmplifierMixer amplifier, 240 W, 4 microphones and3 background music (BGM) inputs. US version. Order number PLE‑1ME240‑USPLE‑1ME060‑CN Plena Mixer AmplifierMixer amplifier, 60 W, 4 microphones and 3 background music (BGM) inputs. Chinese version. Order number PLE‑1ME060‑CNPLE‑1ME120‑CN Plena Mixer AmplifierMixer amplifier, 120 W, 4 microphones and 3 background music (BGM) inputs. Chinese version. Order number PLE‑1ME120‑CNPLE‑1ME240‑CN Plena Mixer AmplifierMixer amplifier, 240 W, 4 microphones and 3 background music (BGM) inputs. Chinese version. Order number PLE‑1ME240‑CNRepresented by:Americas:Europe, Middle East, Africa:Asia-Pacific:China:America Latina:Bosch Security Systems, Inc. 12000 Portland Avenue South Burnsville MN 55337, USA Phone: +1-800-392-3497 Fax: +1-800-955-6831*********************.com Bosch Security Systems B.V.P.O. Box 800025617 BA Eindhoven, The NetherlandsPhone: + 31 40 2577 284Fax: +31 40 2577 330******************************Robert Bosch (SEA) Pte Ltd, SecuritySystems11 Bishan Street 21Singapore 573943Phone: +65 6571 2808Fax: +65 6571 2699*****************************Bosch (Shanghai) Security Systems Ltd.201 Building, No. 333 Fuquan RoadNorth IBPChangning District, Shanghai200335 ChinaPhone +86 21 22181111Fax: +86 21 22182398Robert Bosch Ltda Security Systems DivisionVia Anhanguera, Km 98CEP 13065-900Campinas, Sao Paulo, BrazilPhone: +55 19 2103 2860Fax: +55 19 2103 2862*****************************© Bosch Security Systems 2015 | Data subject to change without notice 1883441163 | en, V4, 01. Jul 2015。