ASSEMBLY INSTRUCTIONS Parts Enclosed:
(1) Bulb(not included)
(2) Socket
(3) Ring
(4) Shade
Assembly/ User Instructions:
1. Carefully unpack the lamp, then place on a stable and flat surface without pluging in.
2.Unscrew the shade ring (3) from the socket (2) .
3. Place shade (4) over the lamp cup.
4.Secure the shade (1) with the shade ring (3), and affix any additional beaded drops.
5. Insert a bulb (not included) into the socket (2).
6. Plug in, and operate the switch to turn on.
(Note:If the lamp will not illuminate please consult a qualified electrician.)
Care Instructions:
·Never fit bulbs of a higher wattage than those specified on the label.
·Clean with soft, dry cloth.
·Always avoid the use of harsh chemicals or abrasive cleaners as they may
cause damage to the lamp.
※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
