769®for long travelapplicationsE4/4HD | P4 | rol e-chains®| autoglide770Precise separation -E4/4HD Wide, rounded plastic Closed and open styles Hinged snap-open4040HD5650 -600104 -65484 5050HD8050 -600110 -660108 R8840HD5675 -462129 -51684 R9850HD8075 -462135 -522108Request InfoRequest InfoThe maintenance-free series 4040 protects the igus chainflex motor and signal cables during the lifting and lowering movements of the tidal turbine and also protects them against agressive ambient conditions. The travel is to approx. 20 m in vertical direction above and below water4040HDcrossbars every link 8840HDfully enclosedRequest InfoHot Chips up to 850°Ce-tubes that repel hot chip up to 850ºC. Some applications, depending on amount and size of the chips, can burn or melt the surface. That is no longer the case with the igus igumid HT material.More information www.igus.eu/HTRequest InfoLockable full-width shelvesRequest InfoRequest Info779************|www.igus.eurol e-chain ®- rolling instead of glidingSpecial solution for long travel applications. Reduce push/pull forces by more than 75% (rolling)T ravels up to 800 m T ravel speeds up to 6 m/s for long travel applications and high speeds Various roller types for optimum application adaption More information from page 806P4 profile-rol e-chain ®- reduce energy consumption by 57%Safe, low noise, abrasion-resistant energy supply system on long travels up to 800 m and more High fill weights up to 30 kg/m High speeds up to 10 m/s Identical pitch of the e-chain link with or without roller Integrated captive roller in the side part autoglide crossbars for a safe guiding More information from page 7865050HDcrossbars every link 9850HDfully enclosede-chains ®| Series 5050HD | crossbars every link (removable along the inner and outer radius)fully enclosed (hinged lids, snap-open along the outer radius from one side)Request InfoHot Chips up to 850°Ce-tubes that repel hot chip up to 850ºC. Some applications, depending on amount and size of the chips, can burn or melt the surface. That is no longer the case with the igus igumid HT material.More information www.igus.eu/HTRequest InfoLockable full-width shelvesRequest Info45°Request Inforol e-chain ®- rolling instead of glidingSpecial solution for long travel applications. Reduce push/pull by more than 75%(rolling) T ravels up to 800 m T ravel speeds up to 6 m/s for long travel applications and high speeds Various roller types for optimum application adaption More information from page 806P4 profile-rol e-chain ®- reduce energy consumption by 57%Safe, low noise, abrasion-resistant energy supply system on long travels up to 800 m and more High fill weights up to 30 kg/m High speeds up to 10 m/s Identical pitch of the e-chain link with or without roller Integrated captive roller in the side part autoglide crossbars for a safe guiding More information from page 786iF product design award 2007 igus system P4+System P4Better cables, stronger , rolling e-chains ®Rolling instead of glidingStronger e-chains ®Optimised cablesGliding applicationStandard100%chainflex®-17%E4.1-17%rol e-chain®-37%System P4-57%Tribo-optimised plastic rollers for all igus P4 systems Wear optimised Long cycle life Extension link for heavy fill weights 2 inner heights available (56, 80 mm)50% higher fill weight possible Aluminium guide trough systemSpecial geometry in combination with autoglide cross bars allows for offset Offset operation of upper and lower run,resulting in continuous roll-through surfaceRequest Infoprofile-rol e-chain®with comb style autoglide crossbars, medium inner height P4.32 crossbars every linkP4.32| Crossbars every link - removable along the inner and outer radiusRequest Inforresulting in continuous roll-through surface1-800-453-1692Request InfoLockable full-width shelvesRequest Infoprofile-rol e-chain®with comb style autoglide crossbars, medium inner height P4.42 crossbars every linkP4.42 | Crossbars every link - removable along the inner and outer radiusRequest Inforresulting in continuous roll-through surface1-800-453-1692Request InfoLockable full-width shelvesRequest Info56Extension link for heavy fill weights50% higher fill weight possible Maximum rigidityDivides cross section into compartments (electric/hydraulic) 2 inner heights (56, 80 mm) Available upon request. More information www.igus.eu/P4profile-rol e-chain ®with comb style autoglide crossbars, large inner heightP4.56 | Crossbars every link - removable along the inner and outer radiusP4.56 crossbars every linkRequest Inforresulting in continuous roll-through surface1-800-453-1692Request InfoLockable full-width shelvesRequest Infoprofile-rol e-chain®with comb style autoglide crossbars, large inner height P4.80 crossbars every linkP4.80 | Crossbars every link - removable along the inner and outer radiusRequest InfoExtension link for heavy fill weights50% higher fill weight possible Maximum rigidityDivides cross section into compartments (electric/hydraulic)2 inner heights (56, 80 mm) Available upon request.More information www.igus.eu/P4rresulting in continuous roll-through surface1-800-453-1692Request InfoLockable full-width shelvesRequest Info®®rol ●Shifting systems2828R3250- 40074- 42454 3838R4250- 40077- 42764 7728R3250- 30074- 32454 7838R4250- 30077- 327644040RHD5650- 600104- 65484 5050RHD8050- 600110- 660108 8840RHD5657- 125129- 51684 9850RHD8073- 141135- 522108Request InfoPhone +49 2203 9649-800P4 profile-rol e-chain®- reduce energy consumption by 57% Safe, low noise, abrasion-resistant energy supply system on long travels up to 800 m and more High fill weights up to 30 kg/m High speeds up to 10 m/s Identical pitch of the e-chain link with or without roller Integrated captive roller in the side part autoglide crossbars for a safe guidingMore information from page786Shipyard-Crane: 180 m travel, 30 kg/m fill weight. No faults with the igus rol-echain since installation in 2001igus rol e-chain saves drive power on long travels. Safelyguided in the igus guide troughs2828Rcrossbars every link7728Rfully enclosed Request InfoOptimised, cable-friendly Pivoting KMA mounting Aluminium SuperT rough,basic versionRequest Info3838Rcrossbars every link7838Rfully enclosed Request InfoOptimised, cable-friendly interior separation Pivoting KMA mounting Aluminium SuperT rough,basic versionRequest Info4040Rcrossbars every link8840Rfully enclosed Request InfoOptimised, cable-friendly Pivoting KMA mounting Aluminium SuperT rough,basic versionRequest Info4040RHDcrossbars every link8840RHD fully enclosedRequest InfoOptimised, cable-friendly interior separation Steel mounting brackets,pivoting, robust andRequest Info5050Rcrossbars every link9850Rfully enclosed Request Info。
