FUKI各型号FEEDER讲解

Optional accessories• A ll accessories can be used with BM3R (45 mm wide) and BM3V (55 mm wide) frames• Accessories are easily mounted• I nternally-mountable auxiliary contact blocks and alarm contact blocks can be front mounted• S ide-mountable auxiliary contact blocks can be mounted on the left side• S hunt trip and undervoltage trip devic-es are available in a wide operating coil voltage range and mount on the right side• S tandard and emergency external handles are available• I P20 terminal cover helps prevent accidental contact with electrically charged parts• O ptional front mounted contact and alarm blocks eliminate horizontal space needed with the DIN railLeft side-mount optional auxiliary, alarm or short-circuit contact blockInstallation of optional contact blocks and trip devicesRight side-mount optional shunt orundervoltage trip deviceAuxiliary Contact BlocksDescription Starter Type Contact Arrangement Weight (g/lb)These contact blocks do not discriminate between OFF, overload, phase-loss, or short circuit. The blocks arelinked to the ON/OFF operation of the MMS, and also operate in the event of an overload, phase-loss, orshort circuit. Up to two contact blocks can be mounted to the right/left front, and up to two contact blocks can be mounted to the left sides.BM3RHB-XXX BM3VHB-XXX BZ0WIABZ0WUAALMounts to left side of MMSMounts to right or left front ofMMSorExternal operating handlesBZ0WKUAACombination Auxiliary/Alarm Contact BlocksStarter Type his contact block combines an auxiliary contact and an alarm contact that operates in the event of an overload, phase loss, orshort-circuit. Alarm contact is not linked to the ON/OFF operation of the MMS.n alarm is displayed in the contact block’s indicator when the alarm contactNote: Operation can be checked with the test trip function.BM3RHB-XXX BM3VHB-XXXBZ0KIAShort-Circuit Alarm Contact BlockStarter Type• The contacts operate only when the MMS has tripped due to a short-circuit (cannot be • When these contacts operate, the blue reset button extends out, and a trip indication is • The power to the MMS can be turned ON after pressing the reset button.Note: Be sure to press the reset button before mounting to the MMS.BM3RHB-XXXBM3VHB-XXXMounts to left Alarm Contact BlocksStarter TypeThis block operates when the MMS trips due to overload, phase-loss, or short-circuit. It is not linked to the ON/OFF operation ofthe MMS.Note: Operation can be checked with the test trip function.BM3RHB-XXXBM3VHB-XXXContact StatusOFFBZ0FAZUMounts to right side of MMSShunt Trip DevicesStarter Type This device is used to remotely trip the MMS.BM3RHB-XXX BM3VHB-XXXUndervoltage trip devicesBZ0RDZUMounts to right side of MMSUndervoltage Trip DevicesStarter Type This device automatically trips the MMS when the controlcircuit voltage drops below the specified value.his device cannot be used together with aundervoltage trip device, press the reset but-BM3RHB-XXX BM3VHB-XXXPush-in lugBZ0SETT erminal CoverAccessories (continued)External Operating HandlesStarter Type sed to operate an MMS installed inside a panel, from the outside of the quipped with an interlock mechanism that prevents someone from mistakenly opening the panel door when the MMS is in the ON state.he shaft can be cut to match the distance between the MMS and the BM3RHB-XXX BZ0VBBL BZ0VYRLAccessory specificationsExternal operating handlesNOTE: Premade MMS enclosures are currently not available.Accessory specifications (continued)Dimensions (mm)Manual motor startersDimensions (continued - mm)AccessoriesMMS with accessoriesMMSL11L23L3T1T2T35264Dimensions (continued - mm)AccessoriesWiring diagrams (continued )Busbar System Components and RatingsSpecificationsWeight (g)2-BM3R, modular space: 45mm BZ0BR02A BZ0BCVABZ0BCRABZ0BFVABZ0BFRABZ0BR03ABZ0BR04A BZ0BR05ABZ0BR12ABZ0BR13ABZ0BR14A BZ0BR15A BZ0BV02ABZ0BV03ANote: Busbar photos continued on next page.BusbarBusbar systemFeatures• T he busbar system reduces wiring time and saves floor space.• T he busbar makes it easy to power from 2 to 5 manual motor starters, with no wir-ing needed.• T he 3-phase feed-in terminals are used to connect the wire for the power supply circuit.• T he busbar cover guards against accidental touching of nonconnected busbar terminals (charged parts).• If using BZ0TCRE terminal cover with BM3R series MMS, the busbar system can not be used.BZ0BV04ABZ0BV12ABZ0BV13A BZ0BV14A。

Flow sensors SFAM2d Internet: /catalogue/...Subject to change – 2022/09Flow sensors SFAMKey featuresAt a glance14[1] Threaded mounting of individualdevice with laminar flow inlet [2] Can be combined with MS6 orMS9 series service units[3] – Very bright LCD display withblue background and white 9-segment display– Bar chart depicts current measured value– Switching point-dependent colour change[4] Central electrical connection viaan M12 plugCompact and capable of high flow ratesSystematically more reliable Easy to operateThis modular flow sensor can operate either as a standalone unit or can be easily combined with the MS series service units.The sensor provides:• Absolute flow rate information – with threshold values and – convenient switching point adjustment via a display • Cumulative air consumption measurement• Patented – adjustable consump-tion-based switching pulse for cu-mulative air consumption measure-ment via the switching output The sensor covers a large measuring range with a specified accuracy thanks to its high dynamic response of 1:100.The sensor can provide precise infor-mation even when flow conditions are fluctuating and unreliable.• A large, illuminated LCD display increases the operational safety and makes the currently displayed flow rate or consumption values easy to read.• Measured values outside the measuring range are visualised: flow rates are shown flashing.• Switching outputs (NPN/PNP) can be changed via the menu• Values that fall below or exceed the threshold values can also be identified from a distance or if the sensor is in an inaccessible location by the display changing colour.• Easy to switch the current sensor settings in SHOW mode• Simple switching between consumption and flow rate indication • Values shown on the display:– can be shown for different standard conditions (DIN 1343, ISO 2533, ISO 6358)– can be filtered/averaged independently of the analogue output in the case of high dynamic response of the measurement ConvenientEasy to combineFlexible installationRight or left?• Festo plug and work solution • Quick and easy menu prompting • Fast commissioning thanks to easy-to-use, intuitive teach-in function • Manual consumption measurement with start/stop and reset functionalityWith MS6 or MS9 series service unit thanks to innovative prism clamping technology. This saves additional installation time.The SFAM has an extremely compact, space-saving design optimised for flow performance.The fluid stream of the unidirectional flow sensor can be selected: either from left to right or from right to left.Flow sensors SFAM Peripherals overviewSFAM-62-...-M for manifold assembly in MS6 series service unit SFAM-62-...-T/W for individual assemblywith laminar flow cartridge with sub-bases and laminar flow inlet5H--NoteAdditional accessories:• Module connector for combination with size MS4/MS6 or size MS9• a Internet: amv, rmv, armv• Adapter for mounting on profiles a Internet: ipm-80, ipm-40-80, ipm-80-803 2022/09 – Subject to change d Internet: /catalogue/...Flow sensors SFAMPeripherals overviewSFAM-90-...-M for manifold assembly in MS9 series service unit SFAM-90-...-T for individual assemblywith laminar flow cartridge with sub-bases and laminar flow inlet-NoteH-Additional accessories:• Module connector for combinations with size MS6, MS9 or MS12• a Internet: rmv, armv4d Internet: /catalogue/...Subject to change – 2022/0952022/09 – Subject to changed Internet: /catalogue/...Flow sensors SFAMType codesAdditional variants can be ordered using the modular product system a 13•Flow input• Type of mounting • Pneumatic connection • Electrical accessories •EU certification (ATEX)Flow sensors SFAM Data sheet Function-M-Flow rate10 ... 1000 l/min30 ... 3000 l/min50 ... 5000 l/min100 ... 10 000 l/min150 ... 15 000 l/min-Q-Temperature range0 ... +50°C-L-Operating pressure0 ... 16 barSFAM-…-MSFAM-…-T• Analogue output 0 ... 10 V,adjustable switching outputs2x PNP or 2x NPN• Analogue output 4 ... 20 mA,adjustable switching outputs2x PNP or 2x NPN• Freely selectable pulse output forconsumption measurement• Analogue filter for setting the risetime• Digital filter for smoothing thedisplay valuesH--NoteTo comply with the specified accura-cies, the SFAM must be supplied viathe following connections:• SFAM-62-...-M via a pneumaticconnection of at least G 1/2,SFAM-90-...-M via a pneumaticconnection of at least G 3/4.• SFAM-62-...-T/W via a connectionwith an inside diameter of at least10 mm, SFAM-90-...-T via a con-nection with an inside diameter ofat least 20 mm.H--NoteDownstream of a filter regulatorMS-LFR or pressure regulator MS-LR,the branching module MS6-FRM-1/2(for size MS6) or MS9-FRM-G (for sizeMS9) must be installed upstream ofthe flow sensor SFAM to maintain theindicated accuracies.1) For information about the area of use, see the EC declaration of conformity at: /sp a Certificates.If the devices are subject to usage restrictions in residential, commercial or light-industrial environments, further measures for the reduction of the emitted interference may be necessary.6d Internet: /catalogue/...Subject to change – 2022/09Flow sensors SFAM Data sheet1) Accuracy with nominal conditions (6 bar, 23°C and horizontal mounting position)% FS = % of the final value in the measuring range (full scale)2)7 2022/09 – Subject to change d Internet: /catalogue/...Flow sensors SFAMData sheet1) Corrosion resistance class 2 to Festo standard 940070Components subject to moderate corrosion stress. External visible parts with primarily decorative surface requirements which are in direct contact with the surrounding industrial environment or media such as coolants or lubricating agents.8d Internet: /catalogue/...Subject to change – 2022/0992022/09 – Subject to changed Internet: /catalogue/...Flow sensors SFAMData sheetFlow measuring range 1) qn as a function of operating pressure p1SFAM-62-...p [bar]q [%F S ]246810121416204060801001201) For an operating pressure of more than 5 bar, the flow sensor can determine measured values with the specified accuracy over the entire measuring range. For an operating pressure below 5 bar, the measuring range with thespecified accuracy is reduced as shown in the graph.Flow sensors SFAMData sheet10d Internet: /catalogue/...Subject to change – 2022/09Ordering data – Modular product system[1] 1000, 3000, G12, N12, WNot with grid dimension 90[2] 10 000, 15 000, G1, G112, N1, N112Not with grid dimension 62[3] G12, G1, G112, N12, N1, N112Not with type of mounting MMandatory specification with type of mounting T, W[4] W Not with EX2Accessories。

菲尼克斯5100说明书菲尼克斯现货FL WLAN 5100 菲尼克斯现货FL WLAN 5100 WLAN接入点/端/中继器MIMO 3x3:2WLAN 02.11a、b、g、n2.4 GHz/5 GHz3根外置天线2x RJ 45尺寸（宽度 x 高度 x 深度）40 mm x 109 mm x 109 mm尺寸说明高度含天线插座，不含天线电缆FL WLAN以太网端口适配器是一款经济型工业WLAN 适配器，可将兼容以太网的设备连接到WLAN网络。

该以太网端口适配器外形紧凑，坚固耐用，内置无线模块和天线。

该设备防护等级达IP65，可直接现场安装，通过带M12连接器的以太网电缆连接到自动化设备。

优势：可直接在集成到应用以太网端口适配器的主要应用领域安装快捷轻松安装在现场以太网端口适配器是一种简易解决方案，可轻松将带以太网接口的工业自动化设备连接到WLAN网络。

该设备防护等级达IP65，可直接现场安装，通过带M12连接器的以太网电缆连接到自动化设备。

优势：内置天线的紧凑型IP65模块用于以太网和电力传输的M12接口轻松安装在现场自动组态，调试更简单安全通过Mode按钮轻松组态使用Mode按钮，无需组态即可轻松快速地构建安全的点到点网络和小型网络。

此外，也可通过网络浏览器轻松组态。

通过AT命令进行高级设置轻松组态和控制FL EPA 2在WLAN EPA模块运行过程中，可通过控制器发出的简单AT命令对其进行自动组态和控制。

这样就可以通过移动系统的控制器根据位置对漫游过程（即接入点之间的转换）进行控制。

FL EPA产品一览特性FL EPA 2FL EPA 2 RSMAWLAN标准IEEE 02.11a/b/gIEEE 02.11 a/b/g频段和道（*依不同国家而定）2.4 GHz，1-11道5 GHz：36-140道（端）5 GHz：36-4道（接入点）2.4 GHz，1-11道5 GHz：36-140道（端）5 GHz：36-4道（接入点）大数据速率（总值）54Mbps54 Mbps大数据流量（净值）< 20 Mbps< 20 Mbps运行模式端（单端网桥、多端网桥）（微型接入点）两个FL EPA模块之间的无线网桥端（单端网桥、多端网桥）（微型接入点）两个FL EPA模块之间的无线网桥大传输功率2.4 GHz：17 dBm（包括天线）5 GHz：15 dBm（包括天线）2.4 GHz：17 dBm（包括天线）5 GHz：15 dBm（包括天线）天线数1（内置）1（外置），RSMA接口安装后的防护等级IP65IP65环境温度（工作）-30°C … 60°C … 65°C电源9 … 30 V DC，大1.7 W9 …30 V DC，大1.7 W特殊性能双无线板：WLAN和蓝牙双无线板：WLAN和蓝牙功能强大的WLAN IEEE 02.11n模块，通范围更广采用新标准和MIMO技术，扩展通范围该设备有*的无线号，并采用符合IEEE 02.11n标准的MIMO（多点输入，多点输出）多天线技术，可在长距离范围内实现稳定、高速且可靠的无线通。

1-52
Key products, GCC-TW – Subject to change – 第一版
建議不使用於新設計上!
-U- 此型號將停產
精巧型氣壓缸 AEVU
技術參數 – 單動，推動
材料 蓋子、缸筒: 精製鋁合金 活塞桿: 高質合金鋼 密封件: 聚氨酯
AEVU-...-...-P-A
AEVU-...-...-A-P-A
建議不使用於新設計上!
-U- 此型號將停產
精巧型氣壓缸 ADVU
技術參數 – 雙動
材料 蓋子、缸筒: 精製鋁合金 活塞桿: 高質合金鋼 密封件: 聚氨酯
ADVU-...-...-P-A
ADVU-...-...-A-P-A
技術參數 活塞直徑 ∅
下載 CAD 相關資料
63
80
100
125
[bar] 1.2 ... 10
1 ... 10
S2 [bar] 1.5 ... 10 1.3 ... 10 1.2 ... 10
0.8 ... 10 1 ... 10
0.6 ... 10 0.8 ... 10
0.5 ... 10 0.5 ... 10
環境條件 多樣型 環境溫度1)
精巧型氣壓缸 ADVU/AEVU
建議不使用於新設計上!
-U- 此型號將停產
相同的驅動力，並且只需要標準氣壓缸 50%的安裝空間 行程長達400 mm T型槽，用於安裝近接感測器 具內螺紋和外螺紋 最新設計中，使用標準氣壓缸ADN/AEN 符合ATEX指令的特定型式，可用於有潛在爆炸危險 的工作環境
40
50
60
68
87
107
128
高度
[mm] 29