基于单片机的家用对讲机设计

  • 格式:doc
  • 大小:442.63 KB
  • 文档页数:30

下载文档原格式

  / 30
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

山西农业大学信息学院

本科毕业论文(设计)基于单片机的家用对讲机设计

系部名称:XXX XXX

专业名称:XXX XXX

学生姓名:X X X

学号:X X X

指导教师:X X X

二○一五年六月

郑重申明

□□本人呈交的学位论文,是在导师的指导下,独立进行研究工作所取得的成果,所有数据、图片资料真实可靠。尽我所知,除文中已经注明引用的内容外,本学位论文的研究成果不包含他人享有著作权的内容。对本论文所涉及的研究工作做出贡献的其他个人和集体,均已在文中以明确的方式标明。本学位论文的知识产权归属于培养单位。

本人签名:日期:

毕业论文版权使用授权书

本毕业论文作者完全了解学校有关保留、使用毕业论文的规定,即:学校有权保留并向国家有关部门或机构送交论文的复印件和电子版,允许论文被查阅和借阅。本人授权山西农业大学信息学院可以将本毕业论文的全部或部分内容编入有关数据库进行检索,可以采用影印、缩印或扫描等复制手段保存和汇编本毕业论文。

保密□,在年解密后适用本授权书。

本论文属于

不保密□。

(请在以上方框内打“√”)

毕业论文作者签名:指导教师签名:

日期:年月日日期:年月日

摘要

本文在深入的分析了短距离无线网络技术的有关标准以及语音处理技术的基础之上,开发出一种基于ZisBee网络技术与单片机开发平台的对讲机系统的终端设计方案。本次方案的研究侧重于信号语音的处理、具有实现简单,成本比较低等特点,适合在家庭里面使用。为了验证各个模块的正确性,本文还提出了各个系统模块的测试方案与测试结果,显示各个模块满足有关的标准,达到了设计的目的。

本文主要分为五个章,首先,首先介绍了无线对讲机的系统的概述以及本次设计的无线对讲机有关语音处理的主要技术,在本文的第三种内容中会对该系统的硬件以及软件系统进行详细的介绍,同时对于操作系统的开发工具给以大体上的介绍。再次对于语音处理模块的流程,尤其是ADPCM 语音编解码算法、VAD 原理,和过采样内插算法,而且对于其进行了实现以及仿真。最后对于本文中所涉及到的模块给以分别测试,测试的结果显示各个模块工作是正常的,功能上面可以达到设计的目标。

本文主要研究了对于无线对讲机语音处理模块与其含有的关键技术进行设计与实现的方法,其具有非常强的实际意义与工程研究价值,同时也是对于无线信道非常窄的条件下面传输的数字音频提供了借鉴的模板。针对于无线对讲机含有的几个关键模块进行研究与设计,同时设计的这些模块具有可移植性,所以可以非常方便的移植到其他的嵌入式开发的环境里面,这些也是具有一定的借鉴意义。

关键词:对讲机技术;集群调度;ZisBee网络技术;单片机

Abstract

Based on the in-depth analysis of the basis of short distance wireless network technology related standards and voice processing technology, the development of a ZisBee network technology and MCU development platform of intercom system terminal design based on. This study focuses on the speech signal processing, which is the realization of a simple, cost low characteristic, suitable for use in the family. To the correctness verification of each module is proposed in this paper, the each module of the system test plan and test results, display modules to meet the relevant standards, to achieve the purpose of design.

This paper is divided into five chapters. Firstly, introduces the overview of wireless intercom system and the design of the wireless walkie talkie on speech processing technology, in the third kind of content will detailed introduction of the system hardware and software system, and operating system development tools give for the general introduction. Again for voice processing module processes, especially ADPCM speech codec algorithm and the principle of VaD, and oversampling interpolating algorithm, but also for its realization and simulation. Finally for the modules involved in this paper to give were tested. Test results show that each module is normal, the function can meet the design goals.

In this paper, we mainly study the for the wireless interphone voice processing module and contains the key technology for the design and implementation of the method, which has a very strong practical significance and research value, but also for the wireless channel is very narrow under the condition of transmission of digital audio provided the reference template. In view of several key modules in the wireless walkie talkie containing of research and design, at the same time, the design of these modules has portability, so it can be very convenient transplanted to other embedded development environment inside, these are also has certain reference significance. Keywords: walkie talkie technology cluster scheduling ZisBee network technology of single chip microcomputer.