C3225X7R2E102J中文资料

SWITCH-MODE TRANSFORMER GUIDE BY TECHNOLOGY
Ferrite
E30/15/7 ETD29X16X10 ETD29X15X10 ETD29X11X10 ETD34X13X11 ETD34X17X11 ETD39X17X13 ER48X18X18 ER54X20X18
This transformer is mainly intended to be used as a Resonant Switch-Mode Transformer for high-end 30” to 42” LCD TV sets with mains insulation. The most suitable circuit topology for this transformer is a half-bridge, quasi-resonant converter using ON Semiconductor’s ZVS controller MC34067. The common range of operation for this Switch-Mode Transformer is from 50-150 kHz.
9+9 6+6 6+6 8+8 7+7 9+9 9+9 7+7 11 +11 6+6 6+6
6+6
4+4 6+6 9+9 4+4 5+4 4+4 4+4 5+5 5+5 5+5 5+5 5+5 7+7
Slot Slot Slot Slot Slot Slot Slot Slot Slot Slot

For Mid Voltage SMDFEATURES•The unique design structure for mid voltage enables a compact size with high voltage resistance.•Rated voltage Edc: 100, 250 and 630V.•C3225, C4532 and C5750 types are specific to reflow soldering. APPLICATIONSSnapper circuits for switching power supply, ringer circuits for tele-phone and modem, or other general high voltage circuits.Dimensions in mm PRODUCT IDENTIFICATION(1) Series name(2) Dimensions(3) Capacitance temperature characteristicsClass 1 (Temperature compensation)Class 2 (Temperature stable and general purpose)(4) Rated voltage Edc(5) Nominal capacitanceThe capacitance is expressed in three digit codes and in units of pico farads (pF).The first and second digits identify the first and second significant figures of the capacitance.The third digit identifies the multiplier.R designates a decimal point.(6) Capacitance tolerance(7) Packaging styleType L W TC1608 1.6±0.10.8±0.10.8±0.1 C2012 2.0±0.2 1.25±0.20.6±0.10.85±0.151.25±0.2 C3216 3.2±0.2 1.6±0.20.6±0.10.85±0.151.15±0.151.3±0.21.6±0.2 C3225 3.2±0.42.5±0.3 1.25±0.21.6±0.22.0±0.2 C4532 4.5±0.43.2±0.4 1.6±0.22.0±0.22.3±0.22.5±0.33.2±0.4 C5750 5.7±0.4 5.0±0.4 1.6±0.22.3±0.21608 1.6×0.8mm2012 2.0×1.25mm3216 3.2×1.6mm3225 3.2×2.5mm4532 4.5×3.2mm5750 5.7×5.0mmcharacteristicsCapacitance change Temperature range C0G0±30ppm/°C–55 to +125°CTemperaturecharacteristicsCapacitance change Temperature range X7R±15%–55 to +125°C2A100V2E250V2J630V1021000pF33333000pF474470000pFJ±5%K±10%M±20%T Taping (reel)B BulkC2012JB2E102K(1)(2)(3)(4)(5)(6)(7)For Mid Voltage SMDC1608 (EIA:CC0603) TYPECAPACITANCE RANGES:CLASS 1 (TEMPERATURE COMPENSATION) TEMPERATURE CHARACTERISTICS: C0G(0±30ppm/°C) RATED VOLTAGE Edc: 250VRATED VOLTAGE Edc: 100V CAPACITANCE RANGES:CLASS 2TEMPERATURE CHARACTERISTICS: X7R(±15%) RATED VOLTAGE Edc:100VCapacitance (pF)ToleranceThickness(mm)Part No.100±10%0.8±0.1C1608C0G2E101K 120±5%0.8±0.1C1608C0G2E121J 150±10%0.8±0.1C1608C0G2E151K 180220±5%0.8±0.1C1608C0G2E221J ±10%0.8±0.1C1608C0G2E221K270±10%0.8±0.1C1608C0G2E271K 330±5%0.8±0.1C1608C0G2E331J 390±10%0.8±0.1C1608C0G2E391K 470560±5%0.8±0.1C1608C0G2E561J ±10%0.8±0.1C1608C0G2E561K680±10%0.8±0.1C1608C0G2E681KCapacitance (pF)ToleranceThickness(mm)Part No.100±5%0.8±0.1C1608C0G2A101J120±10%0.8±0.1C1608C0G2A121K150180±5%0.8±0.1C1608C0G2A181J ±10%0.8±0.1C1608C0G2A181K220±10%0.8±0.1C1608C0G2A221K 270±5%0.8±0.1C1608C0G2A271J330±10%0.8±0.1C1608C0G2A331K390470±5%0.8±0.1C1608C0G2A471J ±10%0.8±0.1C1608C0G2A471K560±10%0.8±0.1C1608C0G2A561K 680±5%0.8±0.1C1608C0G2A681J1000±10%0.8±0.1C1608C0G2A102K1200Capacitance(pF)ToleranceThickness(mm)Part No.1000±10%0.8±0.1C1608X7R2A102K±20%0.8±0.1C1608X7R2A102M1500±10%0.8±0.1C1608X7R2A152K±20%0.8±0.1C1608X7R2A152M2200±10%0.8±0.1C1608X7R2A222K±20%0.8±0.1C1608X7R2A222M3300±10%0.8±0.1C1608X7R2A332K±20%0.8±0.1C1608X7R2A332M4700±10%0.8±0.1C1608X7R2A472K±20%0.8±0.1C1608X7R2A472M6800±10%0.8±0.1C1608X7R2A682K±20%0.8±0.1C1608X7R2A682M10000±10%0.8±0.1C1608X7R2A103K±20%0.8±0.1C1608X7R2A103M∗M tolerance is standard for Mid Voltage X7R capacitors.•For more information about products with other capacitance or other data,For Mid Voltage SMDC2012 (EIA:CC0805) TYPECAPACITANCE RANGES:CLASS 1 (TEMPERATURE COMPENSATION) TEMPERATURE CHARACTERISTICS: C0G(0±30ppm/°C) RATED VOLTAGE Edc: 250VRATED VOLTAGE Edc: 100V CAPACITANCE RANGES:CLASS 2TEMPERATURE CHARACTERISTICS: X7R(±15%) RATED VOLTAGE Edc:250VRATED VOLTAGE Edc: 100VCapacitance (pF)ToleranceThickness(mm)Part No.820±5%0.6±0.1C2012C0G2E821J ±10%0.6±0.1C2012C0G2E821K1000±10%0.8±0.1C2012C0G2E102K 1200±5%0.8±0.1C2012C0G2E122J1500±5%0.8±0.1C2012C0G2E152J ±10%0.8±0.1C2012C0G2E152K18002200±5% 1.25±0.2C2012C0G2E222J ±10% 1.25±0.2C2012C0G2E222K2700±10% 1.25±0.2C2012C0G2E272KCapacitance (pF)ToleranceThickness(mm)Part No.1000±5%0.6±0.1C2012C0G2A102J ±10%0.6±0.1C2012C0G2A102K1200±5%0.6±0.1C2012C0G2A122J ±10%0.6±0.1C2012C0G2A122K1500±5%0.6±0.1C2012C0G2A152J ±10%0.6±0.1C2012C0G2A152K1800±5%0.8±0.1C2012C0G2A182J ±10%0.8±0.1C2012C0G2A182K2200±5%0.8±0.1C2012C0G2A222J ±10%0.8±0.1C2012C0G2A222K2700±5% 1.25±0.2C2012C0G2A272J ±10% 1.25±0.2C2012C0G2A272K3300±5% 1.25±0.2C2012C0G2A332K ±10% 1.25±0.2C2012C0G2A332M3900±5% 1.25±0.2C2012C0G2A392K ±10% 1.25±0.2C2012C0G2A392M4700±5% 1.25±0.2C2012C0G2A472K±10% 1.25±0.2C2012C0G2A472MCapacitance(pF)ToleranceThickness(mm)Part No.1000±10%0.85±0.15C2012X7R2E102K±20%0.85±0.15C2012X7R2E102M1500±10%0.85±0.15C2012X7R2E152K±20%0.85±0.15C2012X7R2E152M2200±10%0.85±0.15C2012X7R2E222K±20%0.85±0.15C2012X7R2E222M3300±10%0.85±0.15C2012X7R2E332K±20%0.85±0.15C2012X7R2E332M4700±10%0.85±0.15C2012X7R2E472K±20%0.85±0.15C2012X7R2E472M6800±10% 1.25±0.2C2012X7R2E682K±20% 1.25±0.2C2012X7R2E682M10000±10% 1.25±0.2C2012X7R2E103K±20% 1.25±0.2C2012X7R2E103M15000±10% 1.25±0.2C2012X7R2E153K±20% 1.25±0.2C2012X7R2E153M22000±10% 1.25±0.2C2012X7R2E223K±20% 1.25±0.2C2012X7R2E223MCapacitance(pF)ToleranceThickness(mm)Part No.1000±10%0.85±0.15C2012X7R2A102K±20%0.85±0.15C2012X7R2A102M1500±10%0.85±0.15C2012X7R2A152K±20%0.85±0.15C2012X7R2A152M2200±10%0.85±0.15C2012X7R2A222K±20%0.85±0.15C2012X7R2A222M3300±10%0.85±0.15C2012X7R2A332K±20%0.85±0.15C2012X7R2A332M4700±10%0.85±0.15C2012X7R2A472K±20%0.85±0.15C2012X7R2A472M6800±10%0.85±0.15C2012X7R2A682K±20%0.85±0.15C2012X7R2A682M10000±10%0.85±0.15C2012X7R2A103K±20%0.85±0.15C2012X7R2A103M15000±10% 1.25±0.2C2012X7R2A153K±20% 1.25±0.2C2012X7R2A153M22000±10% 1.25±0.2C2012X7R2A223K±20% 1.25±0.2C2012X7R2A223M33000±10% 1.25±0.2C2012X7R2A333K±20% 1.25±0.2C2012X7R2A333M47000±10% 1.25±0.2C2012X7R2A473K±20%1.25±0.2C2012X7R2A473M∗M tolerance is standard for Mid Voltage X7R capacitors.•For more information about products with other capacitance or other data,For Mid Voltage SMDC3216 (EIA:CC1206) TYPECAPACITANCE RANGES:CLASS 1 (TEMPERATURE COMPENSATION) TEMPERATURE CHARACTERISTICS: C0G(0±30ppm/°C) RATED VOLTAGE Edc: 630VRATED VOLTAGE Edc: 250V RATED VOLTAGE Edc: 100VCAPACITANCE RANGES:CLASS 2TEMPERATURE CHARACTERISTICS: X7R(±15%) RATED VOLTAGE Edc: 630VRATED VOLTAGE Edc: 250VCapacitance (pF)ToleranceThickness(mm)Part No.100±5%0.6±0.1C3216C0G2J101J ±10%0.6±0.1C3216C0G2J101K120±5%0.6±0.1C3216C0G2J121J ±10%0.6±0.1C3216C0G2J121K150±5%0.6±0.1C3216C0G2J151J ±10%0.6±0.1C3216C0G2J151K180±5%0.6±0.1C3216C0G2J181J ±10%0.6±0.1C3216C0G2J181K220±5%0.6±0.1C3216C0G2J221J ±10%0.6±0.1C3216C0G2J221K270±5%0.6±0.1C3216C0G2J271J ±10%0.6±0.1C3216C0G2J271K330±5%0.6±0.1C3216C0G2J331J ±10%0.6±0.1C3216C0G2J331K390±5%0.6±0.1C3216C0G2J391J ±10%0.6±0.1C3216C0G2J391K470±5%0.85±0.15C3216C0G2J471J ±10%0.85±0.15C3216C0G2J471K560±5%0.85±0.15C3216C0G2J561J ±10%0.85±0.15C3216C0G2J561K680±5%0.85±0.15C3216C0G2J681J ±10%0.85±0.15C3216C0G2J681K820±5%0.85±0.15C3216C0G2J821J ±10%0.85±0.15C3216C0G2J821K1000±5%0.85±0.15C3216C0G2J102J ±10%0.85±0.15C3216C0G2J102K1200±5%0.85±0.15C3216C0G2J122J ±10%0.85±0.15C3216C0G2J122K1500±5% 1.15±0.15C3216C0G2J152J ±10% 1.15±0.15C3216C0G2J152K1800±5% 1.15±0.15C3216C0G2J182J ±10% 1.15±0.15C3216C0G2J182K2200±5% 1.15±0.15C3216C0G2J222J ±10% 1.15±0.15C3216C0G2J222K2700±5% 1.6±0.2C3216C0G2J272J ±10% 1.6±0.2C3216C0G2J272K3300±5% 1.6±0.2C3216C0G2J332J ±10% 1.6±0.2C3216C0G2J332KCapacitance (pF)ToleranceThickness(mm)Part No.3300±5%0.85±0.15C3216C0G2E332J ±10%0.85±0.15C3216C0G2E332K3900±5% 1.15±0.15C3216C0G2E392J ±10% 1.15±0.15C3216C0G2E392K4700±5% 1.15±0.15C3216C0G2E472J ±10% 1.15±0.15C3216C0G2E472K5600±5% 1.15±0.15C3216C0G2E562J ±10% 1.15±0.15C3216C0G2E562K6800±5% 1.6±0.2C3216C0G2E682J ±10% 1.6±0.2C3216C0G2E682K8200±5% 1.6±0.2C3216C0G2E822J±10% 1.6±0.2C3216C0G2E822KCapacitance(pF)ToleranceThickness(mm)Part No.3900±5%0.6±0.1C3216C0G2A392J±10%0.6±0.1C3216C0G2A392K4700±5%0.85±0.15C3216C0G2A472J±10%0.85±0.15C3216C0G2A472K5600±5%0.85±0.15C3216C0G2A562J±10%0.85±0.15C3216C0G2A562K6800±5% 1.15±0.15C3216C0G2A682J±10% 1.15±0.15C3216C0G2A682K8200±5% 1.15±0.15C3216C0G2A822J±10% 1.15±0.15C3216C0G2A822K10000±5% 1.15±0.15C3216C0G2A103J±10% 1.15±0.15C3216C0G2A103KCapacitance(pF)ToleranceThickness(mm)Part No.1000±10% 1.15±0.15C3216X7R2J102K±20% 1.15±0.15C3216X7R2J102M1500±10% 1.15±0.15C3216X7R2J152K±20% 1.15±0.15C3216X7R2J152M2200±10% 1.15±0.15C3216X7R2J222K±20% 1.15±0.15C3216X7R2J222M3300±10% 1.15±0.15C3216X7R2J332K±20% 1.15±0.15C3216X7R2J332M4700±10% 1.15±0.15C3216X7R2J472K±20% 1.15±0.15C3216X7R2J472M6800±10% 1.15±0.15C3216X7R2J682K±20% 1.15±0.15C3216X7R2J682M10000±10% 1.15±0.15C3216X7R2J103K±20% 1.15±0.15C3216X7R2J103M15000±10% 1.3±0.2C3216X7R2J153K±20% 1.3±0.2C3216X7R2J153M22000±10% 1.3±0.2C3216X7R2J223K±20% 1.3±0.2C3216X7R2J223M33000±10% 1.6±0.2C3216X7R2J333K±20% 1.6±0.2C3216X7R2J333MCapacitance(pF)ToleranceThickness(mm)Part No.15000±10% 1.15±0.15C3216X7R2E153K1.15±0.1522000±10% 1.15±0.15C3216X7R2E223K±20% 1.15±0.15C3216X7R2E223M33000 1.6±0.2±20% 1.6±0.2C3216X7R2E333M47000±10% 1.6±0.2C3216X7R2E473K±20% 1.6±0.2C3216X7R2E473M68000 1.6±0.2±20% 1.6±0.2C3216X7R2E683M100000±10% 1.6±0.2C3216X7R2E104K1.6±0.2∗M tolerance is standard for Mid Voltage X7R capacitors.•For more information about products with other capacitance or other data,For Mid VoltageSMDTEMPERATURE CHARACTERISTICS: X7R(±15%) RATED VOLTAGE Edc: 100VCapacitance (pF)ToleranceThickness(mm)Part No.33000±10% 1.15±0.15C3216X7R2A333K1.15±0.1547000±10% 1.15±0.15C3216X7R2A473K ±20% 1.15±0.15C3216X7R2A473M68000 1.6±0.2±20% 1.6±0.2C3216X7R2A683M100000±10% 1.6±0.2C3216X7R2A104K1.6±0.2150000 1.6±0.2±20% 1.6±0.2C3216X7R2A154M∗M tolerance is standard for Mid Voltage X7R capacitors.•For more information about products with other capacitance or other data,For Mid Voltage SMDC3225 (EIA:CC1210) TYPECAPACITANCE RANGES:CLASS 1 (TEMPERATURE COMPENSATION) TEMPERATURE CHARACTERISTICS: C0G(0±30ppm/°C) RATED VOLTAGE Edc: 630VRATED VOLTAGE Edc: 250VRATED VOLTAGE Edc: 100V CAPACITANCE RANGES:CLASS 2TEMPERATURE CHARACTERISTICS: X7R(±15%) RATED VOLTAGE Edc:630VRATED VOLTAGE Edc:250VRATED VOLTAGE Edc:100VCapacitance (pF)ToleranceThickness(mm)Part No.3900±5% 1.25±0.2C3225C0G2J392J ±10% 1.25±0.2C3225C0G2J392K4700±5% 1.6±0.2C3225C0G2J472J ±10% 1.6±0.2C3225C0G2J472K5600±5% 1.6±0.2C3225C0G2J562J ±10% 1.6±0.2C3225C0G2J562K6800±5% 2.0±0.2C3225C0G2J682J ±10% 2.0±0.2C3225C0G2J682KCapacitance (pF)ToleranceThickness(mm)Part No.10000±5% 1.6±0.2C3225C0G2E103J ±10% 1.6±0.2C3225C0G2E103K15000±5% 2.0±0.2C3225C0G2E153J ±10% 2.0±0.2C3225C0G2E153KCapacitance (pF)ToleranceThickness(mm)Part No.15000±5% 1.25±0.2C3225C0G2A153J ±10% 1.25±0.2C3225C0G2A153K22000±5% 1.6±0.2C3225C0G2A223J ±10% 1.6±0.2C3225C0G2A223K33000±5% 2.0±0.2C3225C0G2A333J±10% 2.0±0.2C3225C0G2A333KCapacitance(pF)ToleranceThickness(mm)Part No.47000±10% 2.0±0.2C3225X7R2J473K±20% 2.0±0.2C3225X7R2J473M68000±10% 2.0±0.2C3225X7R2J683K±20% 2.0±0.2C3225X7R2J683MCapacitance(pF)ToleranceThickness(mm)Part No.100000±10% 2.0±0.2C3225X7R2E104K±20% 2.0±0.2C3225X7R2E104M150000±10% 2.0±0.2C3225X7R2E154K±20% 2.0±0.2C3225X7R2E154M220000±10% 2.0±0.2C3225X7R2E224K±20% 2.0±0.2C3225X7R2E224MCapacitance(pF)ToleranceThickness(mm)Part No.330000±10% 2.0±0.2C3225X7R2A334K±20% 2.0±0.2C3225X7R2A334M470000±10% 2.0±0.2C3225X7R2A474K±20% 2.0±0.2C3225X7R2A474M∗M tolerance is standard for Mid Voltage X7R capacitors.•For more information about products with other capacitance or other data,please contact us.For Mid Voltage SMDC4532 (EIA:CC1812) TYPECAPACITANCE RANGES:CLASS 1 (TEMPERATURE COMPENSATION) TEMPERATURE CHARACTERISTICS: C0G(0±30ppm/°C) RATED VOLTAGE Edc: 630VRATED VOLTAGE Edc: 250VRATED VOLTAGE Edc: 100V CAPACITANCE RANGES:CLASS 2TEMPERATURE CHARACTERISTICS: X7R(±15%) RATED VOLTAGE Edc:630VRATED VOLTAGE Edc:250VRATED VOLTAGE Edc:100VCapacitance (pF)ToleranceThickness(mm)Part No.8200±10% 1.6±0.2C4532C0G2J822K 10000±5% 1.6±0.2C4532C0G2J103J15000±10% 2.5±0.3C4532C0G2J153K22000Capacitance (pF)ToleranceThickness(mm)Part No.22000±5% 1.6±0.2C4532C0G2E223J ±10% 1.6±0.2C4532C0G2E223K33000±10% 2.0±0.2C4532C0G2E333K 47000±5% 3.2±0.3C4532C0G2E473JCapacitance (pF)ToleranceThickness(mm)Part No.47000±10% 2.0±0.2C4532C0G2A473K 68000100000±5% 3.2±0.4C4532C0G2A104J±10% 3.2±0.4C4532C0G2A104KCapacitance(pF)ToleranceThickness(mm)Part No.68000±10% 1.6±0.2C4532X7R2J683K±20% 1.6±0.2C4532X7R2J683M100000±10% 2.3±0.2C4532X7R2J104K±20% 2.3±0.2C4532X7R2J104MCapacitance(pF)ToleranceThickness(mm)Part No.150000±10% 1.6±0.2C4532X7R2E154K±20% 1.6±0.2C4532X7R2E154M220000±10% 2.3±0.2C4532X7R2E224K±20% 2.3±0.2C4532X7R2E224M330000±10% 2.3±0.2C4532X7R2E334K±20% 2.3±0.2C4532X7R2E334M470000±10% 2.3±0.2C4532X7R2E474K±20% 2.3±0.2C4532X7R2E474MCapacitance(pF)ToleranceThickness(mm)Part No.680000±10% 2.3±0.2C4532X7R2A684K±20% 2.3±0.2C4532X7R2A684M1000000[1µF]±10% 2.3±0.2C4532X7R2A105K±20% 2.3±0.2C4532X7R2A105M∗M tolerance is standard for Mid Voltage X7R capacitors.•For more information about products with other capacitance or other data,For Mid Voltage SMDC5750 (EIA:CC2220) TYPE CAPACITANCE RANGES:CLASS 2TEMPERATURE CHARACTERISTICS: X7R(±15%)RATED VOLTAGE Edc:630VRATED VOLTAGE Edc:250VRATED VOLTAGE Edc:100VCapacitance (pF)Tolerance Thickness (mm)Part No.150000±10% 1.6±0.2C5750X7R2J154K ±20% 1.6±0.2C5750X7R2J154M 220000±10% 2.3±0.2C5750X7R2J224K ±20%2.3±0.2C5750X7R2J224MCapacitance (pF)Tolerance Thickness (mm)Part No.330000±10% 1.6±0.2C5750X7R2E334K ±20% 1.6±0.2C5750X7R2E334M 470000±10% 2.3±0.2C5750X7R2E474K ±20% 2.3±0.2C5750X7R2E474M 680000±10% 2.3±0.2C5750X7R2E684K ±20% 2.3±0.2C5750X7R2E684M 1000000[1µF]±10% 2.3±0.2C5750X7R2E105K ±20%2.3±0.2C5750X7R2E105MCapacitance (pF)Tolerance Thickness (mm)Part No.680000±10% 1.6±0.2C5750X7R2A684K ±20% 1.6±0.2C5750X7R2A684M 1000000[1µF]±10% 2.3±0.2C5750X7R2A105K ±20% 2.3±0.2C5750X7R2A105M 1500000[1.5µF]±10% 2.3±0.2C5750X7R2A155K ±20% 2.3±0.2C5750X7R2A155M 2200000[2.2µF]±10% 2.3±0.2C5750X7R2A225K ±20%2.3±0.2C5750X7R2A225M∗M tolerance is standard for Mid Voltage X7R capacitors.•For more information about products with other capacitance or other data, please contact us.。

集电极 - 发射极击穿电压 DC电流增益
反向传输电容 过渡频率 转换增益 噪声系数
(Ta = 25°C)
符号
测试条件
ICBO IEBO V (BR) CEO hFE Cre
fT Gce NF
VCB = 25 V, I E = 0 VEB = 3 V, I C = 0 IC = 1毫安,我B = 0 VCE = 10 V, I C = 5毫安 VCB = 10 V, I E = 0, f = 1兆赫 VCE = 10 V, I C = 5毫安 VCC = 12 V, f = 200兆赫,女 L = 260兆赫 （图1）
• 请联系您的东芝销售代表了解详细信息,以环境问题,如产品的RoHS指令的兼容性. 请遵守产品使用与规范纳入或使用受控物质,包括但不限于,欧盟RoHS指令的所有适用的法律和法规.东芝对发生违规作为适用的法律和法规而导致的损害 或损失不承担任何责任.
5
2007-11-01
• 东芝公司及其子公司和附属公司（统称为“TOSHIBA”）,保留这份文件中更改信息的权利,以及相关的硬件,软件和系统（统称为“产品”）,恕不另行通 知.
• 本文档以及任何信息均不得转载未经东芝事先书面许可.即使 东芝的书面许可,复制是允许的,只要在没有任何改动/遗漏.
• 虽然东芝的作品不断地提高产品的质量和可靠性,产品会发生故障或失败.客户 负责符合安全标准和用于提供充分的设计和保障其硬件,软件和 这最大限度地降低风险,并避免出现在产品的故障或失效可能导致生命丧失,身体系统 人身伤害或财产损失,包括数据丢失或损坏.在创作和制作的设计和使用,客户必须 也指,符合（一）中的所有相关信息,东芝的最新版本,包括但不限于本文件, 规格,数据表和应用笔记产品的注意事项和条件中规定的“TOSHIBA 半导体可靠性手册“和（b）对于该产品将与或使用的应用程序的说明.客户全权负责自己的产品设计或应用程序的各个方面,包括但不限于：（a）确定 的利用这样的设计或应用该产品的适当性; （b）评价和确定本文档中包含的任何信息的适用性,或图表,图表,程序,算法,示例应用电路,或 任何其他引用文件; （三）验证这样的设计和应用的所有运行参数.

SPECIFICATION OF QUARTZ CRYSTAL UNITS 1.HOLDER TYPE:XS-322525.000 MHz2.GENERAL2-1 FREQUENCY (F0)25.000 MHz 2-2 MODE OF OSCILLATION (Mn)FUNDAMENTAL 2-3 OPERATION TEMPERATURE RANGE (T 0)-20℃/+70℃2-4 STORAGE TEMPERATURE RANGE (Ts)-40℃/+85℃2-5 TEST SETS&A 250B ANALYSIS SYSTEM 2-6 DRIVE LEVEL (DL)100±2μw 2-7 LOADING CAPACITANCE (CL)20pF3.ELECTRICAL CHARACTERISTICS(This test shall be performed under the condition of temperature at 25±3℃.)3-1 FREQUENCY TOLERANCE (△f)±20ppm Max 3-2 EQUIVALENT RESISTANCE (Rr)40ΩMax/Series3-3 TEMPERATURE DRIFT (T C )±25ppm/ Max -20℃/+70℃3-4 SHUNT CAPACITANCE (C 0)<5pF3-5 INSULATION RESISTANCE500M Ωmin/DC 100V±15V (Lead to lead ,case to lead)4.DIMENSIONS AND MARKING 4-1 HOLDER TYPE XS-32254-2 DIMENSION (mm)DESIGN INSPECTIONZHEJIANG EAST CRYSTAL ELECTRONIC.CO.,LTDECEC Name:M25000J0094-4-2 Dimensions of the reel4-4-3 Packing and Label1 Reel=3000pcsBox type(Reel quantity)Box size(L×W×H) mmAtype200×200×140 Manufactory name: ZHEJIANG EAST CRYSTAL ELEC.CO.,LTD5-5.REFLOW(WAVE)SOLDERINGFollowing profile of heat stress is applied to resonator,then being place in the naturalcondition for 1 hour,resonator shall be measured.260±5℃ 10~20sec150~190℃ 120sec5-6.SOLDERING DIPTerminals/lead-wires of specimen shall be dipped into solder melter tankat +260℃±5℃ for 3 sec.Dipping depth shall be 2mm from the bottom of specimens body.(Afterapplying ROSIN FLUX) soldering portion shall be covered in over 95% ofTerminals/lead-wires dipped.5-7.HUMIDITYElectrical characteristics shall be satisfied after letting it alone at 65±2℃in humidity of 90~95% for 500 hours.5-8.STORAGE IN LOW TEMPRATUREElectrical characteristics shall be satisfied after letting it alone at -40±2℃for 500 hours.5-9.STORAGE IN HIGH TEMPRATUREElectrical characteristics shall be satisfied after letting it alone at 85±2℃for 500 hours.DESIGN INSPECTION ZHEJIANG EAST CRYSTAL ELECTRONIC.CO.,LTDNo:ECAB110734Date:2011/7/256.Structure IllustrationNo.123456DESIGN INSPECTIONFe ALLOYAg SiO2Ag+Epoxy Resin Element(Blank)Conductive Adhesive LID(Cap)External Electrode QUARTZ CRYSTAL UNITSMaterialsItemsInternal Electrode PKG(Base)ZHEJIANG EAST CRYSTAL ELECTRONIC.CO.,LTDCERAMIC+Au PLATING Au PLATING 154326。