HYP PM6803A 高精度功率计使用说明书 2011-12-25

High-Speed Power MeterPM-1600Excellent ±0.015 dB linearity Up to 4096 samples per second12 ms stabilization time over the entire dynamic range Wide Area Detector option available Fast System MonitoringWith its fast stabilization time and high sampling rate, the PM-1600High-Speed Power Meter is ideal for system monitoring. To start your data acquisition and take full advantage of the high sampling rates,synchronize acquisitions using the two available synchronization trigger types.Two Operation Modes. Versatility.In automatic gain range mode, power fluctuations of up to 95 dB will stabilize in 12 ms and a continuous rate of up to 256 samples per second can be produced. Or, manually select the gain range for individual channels. In this mode of operation, the PM-1600stabilizes in less than 1 ms, with rates as high as 4096 samples per second.Advanced Detector OptionSelect EXFO’s Wide Area Detector option for excellent repeatability of in-process testing of passive components long before they areconnectorized.The advanced detector option provides fast stabilization time of 6 ms. Combined with our family of bare fiber adapters, the PM-1600 High-Speed Power Meter will allow you to take precise and efficient measurements in the S-, C- and L-bands.Ease-of-Use. Engineered.The PM-1600 was designed with the user in mind. A menu-driven interface guides you through the operation, displaying results clearly. The external trigger connection enables you to start an acquisition with a TTL voltage (electrical) trigger. Control your unit remotely with the GPIB and RS-232 interface and control codes from any compatible PC or test station. LabVIEW™ drivers available upon request.Select the FOA-8100utility adapter for compatibility with industry bare fiber adapters.PM-1600Specifications 1Ordering InformationModelPM-1613/1623PM-1613W/1623W Number of detectors 1/21/2Detector typeInGaAs InGaAs Detector size (mm)13Wavelength range (nm)800 to 1700800 to 1700Power range 2(dBm)9 to −808 to −70Uncertainty 3(%)±5±5(0 to −55 dBm)(0 to −50 dBm)Linearity 4(dB)±0.015±0.015(0 to −55 dBm)(0 to −50 dBm)Noise (peak-to-peak)5(pW)320Power resolution (dB)0.001 (9 to −40 dBm)0.001 (8 to −40 dBm)Wavelength resolution (nm)0.010.01Stabilization time (ms)automatic range 12 (9 to −85 dBm) 6 (8 to −75 dBm)automatic range 3 (9 to −49 dBm) 3 (8 to −49 dBm) fixed range (1 to 4)11Sampling rate (sample/s/channel)fast acquisition modeup to 4096up to 4096continuous measurement mode up to 256up to 256Fiber type (µm)5/125 to 62.5/1255/125 to 62.5/125Analog output bandwidth 6(Hz) (ranges 1 to 6)700 k; 700 k; 30 k; 30 k;50 k; 7.5 k; 5 k; 7 k;150; 150; typical1 k; 1 k; typicaloutput voltage (V)between 0 and 2.15, typical between 0 and 2.15, typical output impedance (Ω)640640General SpecificationsExternal trigger input voltage (V)0 to 5 (TTL)Size (H x W x D)11.7 cm x 22.2 cm x 33.3 cm (4 5/8in x 8 3/4in x 13 1/8in)Weight 2.8 kg(6.2 lb)Temperature operating 0 °C to 40 °C (32 °F to 104 °F)storage−35 °C to 70 °C(−31 °F to 158 °F)Relative humidity 70 to 80 % non-condensingStandard AccessoriesInstruction manual, 1 or 2 connector adapters Certificate of calibration Certificate of Compliance AC power cordMT-RJ ConnectorsConnector adapter for MT-RJ: For use with singlemode fiber on PM-16X3W, FOA-93 can be ordered separetely (uncertainty is not guaranteed with the FOA-93)PM-1600 High-Speed Power MeterPM-16XXNumber of channels 1= One channel 2= Two channelsDetector code 3= InGaAs3W = InGaAs wide area (3 mm)Specify the model number and the connector adapter you wish to obtain.Connector adapter codeFOA-216=SMA 906 low reflection FOA-222=FC low reflection:FC, FC (/PC/SPC/UPC/APC, NEC-D3)FOA-228=DIN 47256 (LSA) low reflection:DIN 47256 (/PC/APC)FOA-232=ST low reflection: ST, ST (/PC/SPC/UPC)FOA-240=Diamond HMS-0, HFS-3 (3.5 mm)low reflectionFOA-254=SC low reflection: SC, SC(/PC/SPC/UPC/APC)FOA-276=FSMA HMS-10/AG, HFS-10/AGlow reflectionFOA-284=Diamond HMS-10, HFS-13 low reflection FOA-296=E-2000 low reflection: E-2000 (PC/APC)FOA-298= LC low reflection FOA-299=MU low reflection FOA-8100=Utility adapterCORPORATE HEADQUARTERS 465 Godin AvenueVanier (Quebec) G1M 3G7 CANADA Tel.: 1 418 683-0211 ·Fax: 1 418 683-2170EXFO AMERICA 1201 Richardson Drive, Suite 260Richardson TX 75080 USATel.: 1 800 663-3936 ·Fax: 1 972 907-2297EXFO EUROPE Le Dynasteur, 10/12 rue Andras Beck 92366 Meudon la Forêt Cedex FRANCE Tel.: +33.1.40.83.85.85 ·Fax: +33.1.40.83.04.42EXFO ASIA-PACIFIC 151 Chin Swee Road, #03-29 Manhattan House SINGAPORE 169876Tel.: +65 333 8241·Fax: +65 333 8242TOLL-FREE (USA and Canada)Tel.: 1 800 663-3936 • *************SPPM1600.3AN 01/11© 2001 EXFO Electro-Optical Engineering Inc. All rights reserved.Printed in CanadaEXFO is certified ISO 9001 and attests to the quality of these products, which come with a 12-month warranty and after-sales support service.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.EXFO has made every effort to ensure that the information contained in this specification sheet is accurate. However, we accept noresponsibility for any errors or omissions, and we reserve the right to modify design, characteristics and products at any time without obligation.Units of measurement in this document conform to SI standards and practices.Contact EXFO for prices and availability or to obtain the phone number of your local EXFO distributor.For the most recent version of this spec sheet, please go to the EXFO Web site at /support/techdocs.asp In case of discrepancy, the Web version takes precedence over any printed literature.Notes1. All specifications are measured at 1310 nm (unless otherwise specified) with an FC/non-angled connector and a warmup time of 20 minutes (30 minutes for PM-16X3W), followed by an offset nulling.2. From 18 °C to 32 °C3. Measured at 23 °C ±1 °C with FOA-222 between 1000 and 1640 nm. Add 1 % to uncertainty below 1000 nm and 6 %over 1640 nm. All uncertainties are valid on the day of calibration.4. Averaged measurement at constant temperature in 0 to 40 °C range.5. Averaging time 0.25 s, observation time 50 s at 23 °C ±1 °C, from 1200 nm to 1640 nm.6. Bandwidth corresponds to each electrical scale from the lowest to the highest gain.7. Measured in 0 °C to 40 °C range.。

HYP PM6803A功率计使用说明书(Ver1.0 2011‐3‐5)HYP PM6803A功率计是一款多功能，高分辨率的单相功率计。

1.0主要功能：●最大量程：650V , 3A , 999.999W。

●能同时测量、显示8项参数：电压(VRMS), 电流(IRMS), 电压峰值(Vpeak, Ipeak), 有功功率(P),视在功率(S) , 功率因数(PF), 频率(F)。

●高分辨率：电压、电流最高5位分辨率，功率测量最小分辨率0.001W。

●测量电压峰值、电流峰值，捕捉记录最大值；●采用大液晶屏显示，界面直观，操作简单易用。

可切换大/小字体显示测量结果；可控制运行(RUN)/暂停(STOP)，锁定显示测量结果，方便阅读分析；可以设定捕捉记录最高的电压峰值、电流峰值，方便了解负载开机的峰值电流、长期工作时的瞬间最大峰值电流等。

●智能测试功能。

8项参数都可以进行上下限规格判断，可以开启/关闭各项参数的比对功能；有4种测试方式供选择，能自动判断待测负载接入自动启动测试，灵活地适应更多的场合使用；启动测试可以由按键、或I/O外部触发；测试结果有不同的声音、指示灯提示；可以储存15个测试文件，每个文件可以编辑名称，便于记忆。

●RS232通信。

可与HYP其他智能设备进行组合，实现更强大的测试功能；可用PC软件进行记录测量结果，或者用于二次开发。

2.0各项测量参数的技术指标：参数 输入范围或最大量程 分辨率 精确度电压真有效值 (VRMS)RMS 420.00V ,PEAK 650.00V0.01V ±0.2%F.S.电流真有效值 (IRMS)RMS 3.0000A ,PEAK 6.5000A0.0001A ±0.2%F.S.电压峰值(VPEAK) 650.00V 0.01V @1KHZ ±5%F.S.电流峰值(IPEAK) 6.5000A 0.0001A @1KHZ ±5%F.S.有功功率 (ATP) 999.999W 0.001W ±0.2%F.S.视在功率 (SUI) 999.999W 0.001W ±0.2%F.S.功率因数 (PF) 1.000 0.001 ±0.2%F.S.频率 (Fq) 15.00Hz~650.0Hz <100Hz 0.01Hz>100Hz 0.1Hz±4读数输入AC频率范围： 15.00Hz~650.0Hz采集的参数更新速率：0.5秒/次。

FPD1001B thru FPD1003B,FPD1102B and FPD1103B,FPD1201B thru FPD1203B SERIES LOW FLOWPositive Displacement FlowmetersTo the owner:Please take a few minutes to read through the manual before installing and operating your meter. Always retain this manual for future reference. If you have any problems with the meter, refer to the Maintenance and Troubleshooting sections of the manual.This manual contains connection and op-erating instructions for the OMEGA FPDSeries meters. This includes the following models:FPD1001BFPD1102B FPD1201B FPD1003BFPD1002B FPD1203BFPD1202B FPD1103BPart breakdowns for each model are locat-ed at the back of this manual. For models with displays and /or 4-20 mA output, anadditional instruction manual is provided.The flowmeter has incorporated the oval ro-tor principal into its design. This has proven to be a reliable and highly accurate method of measuring flow. Exceptional repeatability and high accuracy over a wide range offluid viscosities and flowrates are features of the oval rotor design. With low pressure drop and high pressure rating, oval rotor flowmeters are suitable for both gravity and pump (in-line) applications.Please read this informationcarefully before use!Before use, confirm the fluid to be used is compatible with the meter. Refer to Industry fluid compatibility charts or consult yourlocal representative for advice.To prevent damage from dirt or foreignmatter it is recommended that a Y or bas-ket type 200 mesh strainer be installed as close as possible to the inlet side of the meter. Contact your local representative for advice.NOTE: To prevent damage to the meter, slowly fill the system with fluid (this will prevent damage caused by air purge). Failure to do this could damage the meter.To reduce pressure build up, turn off the pump at the end of each day.1. Use thread sealant on all pipe threads.2. Ensure the meter is installed so that rotor shafts are always in a horizontal plane. Flow is bi-directional.3. OMEGA recommends use of flexible connections.4. Extreme care must be taken when installing the meter. Pipe strain or overtightening the meter connections can cause meter damage.Your meter is equipped with both a Hall Effect sensor and a Reed Switch sensor. The equipment you are sending the pulse signal to will determine which sensor you use. The wires for the unused sensor will not be used. Refer to page 2 for specifications and wir-ing connections.▲12Hall Effect 0 VDCSIG + VDCReceiving Instrument Power Supply Signal GND 1.8k Ω 24 VDCValue depends on voltage. Check if receiving instrument has internal Pull Up resistor.Output TypeWire Function Wire Function Wire Function Note Reed SwitchGreen Yellow No Polarity Required Hall Effect Red +VDC Black Gnd (0 V) White SignalNPN Open Collector Sensor Wiring Connections CharacteristicSymbol Notes Rating Units Voltage SupplyV CC 30 V Reverse Supply VoltageV RCC -30 V Output Off VoltageV OUT 30 V Reverse Output VoltageV ROUT -0.5 V Output CurrentI OUTSNK 25 mA Magnetic Flux DensityB Unlimited G Operating Ambient TemperatureT A Range L -40 to 150 ° C Maximum Junction TemperatureT J (MAX) 165 ° C Storage Temperature T STG -65 to 170 ° C Hall Effect Specifications (Absolute Maximum Ratings)the fluid meter to be repaired.CAUTIONEnsure the fluid line is depressurized before commencing repairs.CAUTION electrical disconnected ing repairs.CAUTION To prevent damage to the meter dur-re-commissioning, piping system with fluid before start-ing the pumping system.CAUTION Refer to the Sensor Wiring section for CAUTIONConditions Min. Typ. Max. Unit Magnetic Properties:Pull-In at 20°C 36.5 AT Test Equipment KMS-03Special Product Data:Contact Rating Any DC combination of V & A notto exceed their individual max.’s 10 WSwitching Voltage DC or Peak AC 30 VDCOperating Ampere DC or Peak AC 0.5 ASwitching Current DC or Peak AC 0.5 ASensor Resistance Measured with 40% overdrive 360 mOhmHousing Material Celanex 3216Case Color BlackSealing Compound Epoxy Resin Environmental Data:Operating Temperature -5 130 °CStorage Temperature -20 130 °C Cable Specifications:Cable Type Single WiresTemp. Range Unmoved -30 130 °CTemp. Range Moved -5 130 °CCable Material FEP Cross Section AWG 28Reed Switch Specifications32. Fit the O-ring into the O-ring groove in the meter body.4Allignment MarksMeter CapBodyRotorsO-RingLegend PlateScrewsPulse Meter Disassembly1. Loosen and remove four Phillips head or cap head screws (see Figure 2).2. Remove the meter cap and O-ring.3. Remove the rotors. Note the position of the rotor with the magnet or grub screws.4. Clean and inspect all components, replace as necessary.Pulse Meter Reassembly 1. Replace the rotors. Refer to Figure 3 or Figure 4 for correct orientation. Rotate the rotors by hand to ensure correct engagement.3. Replace the meter cap.NOTE: Ensure all the alignment marks are lined up with the mark on the body (see Figure 2).4. Replace and tighten the four bolts to the required torque. Refer to Bolt Torque in the Specifications section for details.5. Check meter function using low air pressure.6. Restore the fluid and reconnect the wiring as detailed in the Installation and Pulser Details sections.Rotors with Magnets Models: FPD1001B & FPD1201B Models: FPD1002B, FPD1003B, FPD1102B,FPD1103B, FPD1202B & FPD1203B 5Symptom Probable Cause Corrective ActionFLUID WILL NOT 1. Foreign matter blocking Dismantle meter, clean rotors. Strainer must FLOW THROUGH rotors be fitted in-line.THE METER 2. Line strainer blocked Clean strainer.3. Damaged rotors Replace rotors. Strainer must be fitted in-line.4. Meter connections over- Readjust connections.tightened REDUCED FLOW 1. Line strainer partially Clean strainer.THROUGH THE blocked METER 2. Fluid is too viscous Maximum viscosity 1000 centipoise.METER READING 1. Fluid flowrate is too low See specifications for minimum and maximum INACCURATE or too high flowrates.2. Air in fluid Bleed air from system.3. Excess wear caused by Check meter body and rotors.incorrect installation METER NOT 1. Faulty Hall Effect sensor Replace meter cap.GIVING A PULSE or Reed Switch SIGNAL 2. Faulty magnet Replace rotors.3. Rotors installed in wrong Refer to correct rotor positioning and positionassembly instructions.TROUBLESHOOTINGComponent Wetted Materials Body:FPD1001B, FPD1002B & FPD1003B AluminumFPD1102B & FPD1103B PPSFPD1201B, FPD1202B & FPD1203B 316L Stainless SteelShafts:FPD1001B, FPD1002B, FPD1003B, 316 Stainless Steel FPD1201B, FPD1202B & FPD1203BFPD1102B & FPD1103B Hastalloy (optional) Rotors:FPD1001B, FPD1002B, FPD1003B, PM Stainless Steel FPD1201B, FPD1202B & FPD1203BFPD1102B & FPD1103B PPS Bushings:FPD1001B, FPD1201B, FPD1002B, CarbonFTB1003B, FPD1102B, FPD1103B,FPD1202B & FPD1203BInner Plate / Meter Cap:FPD1001B, FPD1002B, FPD1003B, PPSFPD1102B & FPD1103BFPD1201B, FPD1202B & FPD1203B Stainless Steel Magnet:All models Samarium Cobalt67Item Rec. Part or Set No. Qty.Parts (Order from this column only) Part Description1 1 MS600NS Meter Body & Shafts NPT Stainless Steel1 1 MS605NS Meter Body & Shafts NPT Aluminum2 1 u MS1180AS Meter Cap (FPD1001B)2 1 u MS1180-1AS Meter Cap (FPD1201B)3 4 MS1228S Screws, Aluminum3 4 MS12138 Screws, Stainless Steel4 1 MS601S Rotor Assembly Stainless Steel5 1 BS029VS O-Ring (FKM) 5 1 BS029PS O-Ring (Perfluoroelastomer)14523Models: FPD1001B FPD1201Bu = Recommended Spare Parts (See Figure 2).Bold Text = Indicates Stainless Steel model parts.Stainless Steel Models Aluminum Models Port Size 1/8 in. 1/8 in.Accuracy of Reading ± 1% ± 1%Maximum Viscosity 1000 Centipoise 1000 CentipoiseFlow Ranges (LPH or GPH)Above 5 centipoise 0.5 to 50 / 0.132 to 13.2 0.5 to 50 / 0.132 to 13.2Below 5 centipoise 2 to 50 / 0.528 to 13.2 2 to 50 / 0.528 to 13.2K-Factor (Pulses per Liter/Gallon)1552 / 5875.32 1552 / 5874.32Max. Operating Pressure SS = 5500 kPa / 800 PSI / 55 Bar 1000 kPa / 150 PSI / 10 Bar Strainer Size (Recommended)200 Mesh 200 MeshBolt Torque SS = 80 in-lb. 17.7 in-lb.Min. Operating Temperature -10°C / +14°F -10°C / +14°FMax. Operating Temperature 120°C / 248°F 60°C / 176°FPulse Type Hall Effect Sensor/Reed Switch Hall Effect Sensor/Reed Switch Cable Length 1 meter / 3.28 feet 1 meter / 3.28 feetWeight 602 g / 21.23 oz. 308 g / 10.86 oz. Dimensions (W x D x H)60mm x 50mm x 50mm 60mm x 50mm x 50mmFace to Face 67mm / 2.63 in. 60mm / 2.36 in.89Item Rec. Part or Set No. Qty.Parts (Order from this column only) Part Description1 1 MS1S-2S Meter Body & Shafts NPT Stainless Steel1 1 MS1AL-2S Meter Body & Shafts NPT Aluminum1 1 MS1R-2C Meter Body & Hast Shafts NPT PPS2 1 MS6-1S Rotor Assembly Stainless Steel2 1 MS6S Rotor Assembly PPS3 4 MS1228S Screws, Aluminum/PPS3 4 MS1213S Screws, Stainless Steel4 1 u MS1180AS Meter Cap (FPD1002B)4 1 u MS1180-1AS Meter Cap (FPD1202B)4 1 u MS11870RAS Meter Cap (FPD1102B)5 1 BS029VS O-Ring (FKM) 5 1 BS029PSO-Ring (Perfluoroelastomer)12543Models: FPD1002B FPD1202B FPD1102B u = Recommended Spare Parts (See Figure 2).Bold Text = Indicates Stainless Steel model parts.Stainless Steel & PPS ModelsAluminum Models Port Size1/4 in. 1/4 in.Accuracy of Reading± 1% ± 1%Maximum Viscosity1000 Centipoise 1000 Centipoise Flow Ranges (LPH or GPH)Above 5 centipoise2 to 100 / 0.53 to 26.4 2 to 100 / 0.53 to 26.4 Below5 centipoise5 to 100 / 1.32 to 26.4 5 to 100 / 1.32 to 26.4K-Factor (Pulses per Liter/Gallon)1000 / 3785 1000 / 3785Max. Operating PressureSS = 5515 kPa /800 PSI / 55 Bar 1000 kPa/ 150 PSI / 10 BarPPS = 500 kPa / 75 PSI / 5 Bar Strainer Size (Recommended)200 Mesh 200 Mesh Bolt TorqueSS = 80 in-lb. 17.7 in-lb.PPS = 8.8 in-lb. Min. Operating Temperature-10°C / +14°F -10°C / +14°F Max. Operating TemperatureSS = 120°C / 248°F 80°C / 176°FPPS = 80°C / 176°F Pulse TypeHall Effect Sensor/Reed Switch Hall Effect Sensor/Reed Switch Cable Length1 meter / 3.28 feet 1 meter / 3.28 feet WeightSS = 240 g / 8.5 oz. 310 g / 11 oz.PPS = 600 g / 21.2 oz.Dimensions (W x D x H)60mm x 50mm x 50mm 60mm x 50mm x 50mm Face to FaceSS = 67mm / 2.63 in. 60mm / 2.36 in.PPS = 64mm / 2.52 in.1011Item Rec. Part or Set No. Qty. Parts (Order from this column only)Part Description1 1 MS2S-2S Meter Body & Shafts NPT Stainless Steel1 1 MS2AL-2S Meter Body & Shafts NPT Aluminum1 1 MS2R-2C Meter Body & Hast Shafts NPT PPS2 1 u MS1180AS Meter Cap (FPD1003B)2 1 u MS1180-1AS Meter Cap (FPD1203B)2 1 u MS1180RAS Meter Cap (FPD1103B)3 4 MS1228S Screws, Aluminum3 4 MS1213S Screws, Stainless Steel4 1 MS814S Rotor Assembly Stainless Steel4 1 MS813S Rotor Assembly PPS4 1 MS814HS Rotor Assembly Stainless Steel High Viscosity5 1 BS029VS O-Ring (FKM) 5 1 BS029PS O-Ring (Perfluoroelastomer)14523Models: FPD1003B FPD1203B FPD1103Bu = Recommended Spare Parts (See Figure 2).Bold Text = Indicates Stainless Steel model parts.Stainless Steel & PPS ModelsAluminum Models Port Size1/4 in. 1/4 in.Accuracy of Reading± 1% ± 1%Max. Viscosity1000 Centipoise 1000 Centipoise High Viscosity OptionYes Yes Flow Ranges (LPH or GPH)Above 5 centipoise15 to 500 / 4 to 32 15 to 500 / 4 t o 32 Below 5 centipoise25 to 500 / 6 to 132 25 to 500 / 6 to 132K-Factor (Pulses per Liter/Gallon)400 / 1514 400 / 1514Max. Operating PressureSS = 5515 kPa/800 PSI/55 Bar 1000 kPa/150 PSI/10 BarPPS = 500 kPa/75 PSI/5 Bar Strainer Size (Recommended)200 Mesh 200 Mesh Bolt TorqueSS = 80 in-lb. 17.7 in./lbs.PPS = 8.8 in-lb. Min. Operating Temperature-10°C / +14°F -10°C / +14°F Max. Operating TemperatureSS = 120°C / 248°F 80°C / 176°FPPS = 80°C / 176°F Pulse TypeHall Effect Sensor/Reed Switch Hall Effect Sensor/Reed Switch Cable Length1 meter / 3.28 feet 1 meter / 3.28 feet Weight240 g / 8.5 oz. 320 g / 12 oz.600 g / 21.2 oz. (PPS)Dimensions (W x D x H)60mm x 50mm x 50mm 60mm x 50mm x 50mm Face to FaceSS = 67mm / 2.63 in. 60mm / 2.36 in. PPS = 64mm / 2.52 in.12M-4686 / 0611。

本手册适用于软件版本 V1.03 Copyright © 2009-7-24本手册版本V1.01北京博电新力电力系统仪器有限公司版权所有本手册中的产品信息、说明以及所有技术数据均不具有合同约束力。

北京博电新力电力系统仪器有限公司（下简称北京博电公司）保留对产品技术数据进行修改而不另行通知的权利。

产品与本手册不符之处，以实际产品为准。

北京博电公司对于本手册中可能发生的错误不承担责任。

未经北京博电公司书面许可，不得全部或部分拷贝、重印该手册。

注意事项PM测试软件是与PM系列电力自动化测试装置配套使用的专用测试软件。

PM测试软件安装在台式或便携式计算机上，运行在Windows XP操作系统下。

PM测试装置使用USB信号线或以太网双绞信号线与计算机连接，由PM测试软件对测试装置进行联机控制。

联机工作时应保证信号线可靠连接，注意不要随意拉扯信号线或晃动信号线连接端。

PM测试装置为高精度电子仪器；为保证输出和测量的精度，装置开机后应预热30min以上。

目录注意事项 (3)目 录 (4)1.软件概述 (6)1.1. 软件启动 (6)1.2. 测控装置功能测试 (7)1.3. 计算机监控系统功能测试 (8)1.4. 变送器功能测试 (8)2.软件和通讯驱动程序安装 (9)2.1. 软件安装 (9)2.2. USB口装置驱动程序安装 (9)3.通讯设置 (15)3.1. PM设备接口选择 (15)3.2. 网口PM设备联机通讯设置 (16)3.3. 闭环通讯设置 (20)4.手动测试 (25)4.1. 概述 (25)4.2. 测试参数设置 (26)4.3. 手动输出 (30)5.交流采样自动测试 (31)5.1. 概述 (31)5.2. 测试参数设置 (33)5.3. 测试接线 (42)5.4. 测试操作 (43)6.变送器自动测试 (47)6.1. 概述 (47)6.2. 测试参数设置 (48)6.3. 测试接线 (56)6.4. 测试操作 (56)7.同期测试 (58)7.1. 概述 (58)7.2. 测试参数设置 (60)7.3. 测试接线 (65)7.4. 测试操作 (66)8.谐波测试 (68)8.1. 概述 (68)8.2. 测试参数设置 (68)8.3. 谐波输出 (69)8.4. 谐波测试实例 (69)9.系统测试 (70)9.1. 概述 (70)9.2. 测试参数设置 (71)9.3. 测试接线 (75)9.4. 测试操作 (75)附录A 点表设置程序使用说明 (77)附录B 点表命名说明 (89)附录C 交流采样闭环校验报告实例 (91)1.软件概述PM测试软件是与PM系列电力自动化测试装置配套使用的专用测试软件。

使用说明书OPERATION MANUALTH2681/TH2681A绝缘电阻测试仪TH2681/TH2681A High Resistance Meter************目录第1章概述................................................................................................................................. 1-11.1产品概要 ......................................................................................................................... 1-11.2使用条件 ......................................................................................................................... 1-11.2.1 电源 ..................................................................................................................................................... 1-11.2.2 环境温度与湿度 .................................................................................................................................. 1-11.2.3 体积和总量............................................................................................................................................ 1-11.2.4 几点注意问题....................................................................................................................................... 1-21.3使用周围环境 .................................................................................................................. 1-21.4保险丝............................................................................................................................. 1-2第2章面板说明 ......................................................................................................................... 2-12.1前面板说明...................................................................................................................... 2-12.2后面板说明...................................................................................................................... 2-2第3章操作说明 ......................................................................................................................... 3-13.1待测物的测试方法基本操作 ............................................................................................ 3-13.2测试参数设定前须知 ....................................................................................................... 3-23.2.1 测试等效电路图 .................................................................................................................................. 3-23.2.2 调∞ ......................................................................................................................................................... 3-33.3测试参数设定 .................................................................................................................. 3-33.3.1 电压设定................................................................................................................................................ 3-33.3.2 倍率设定................................................................................................................................................ 3-43.3.3 上限设定................................................................................................................................................ 3-43.3.4 充电时间设定....................................................................................................................................... 3-43.3.5 举例说明................................................................................................................................................ 3-43.3.6 快速操作指南....................................................................................................................................... 3-1 第4章仪器的校准、检验与维修................................................................................................ 4-14.1直流极化电压的产生与检验 ............................................................................................ 4-14.2最大充电电流的检验 ....................................................................................................... 4-14.3绝缘电阻的检验 .............................................................................................................. 4-2第5章技术指标 ......................................................................................................................... 5-35.1测试电压 ......................................................................................................................... 5-35.2测试范围 ......................................................................................................................... 5-35.3电阻测试准确度：10% ± 0.5格 ................................................................................... 5-35.4充电时间 ......................................................................................................................... 5-35.5预置范围 ......................................................................................................................... 5-45.6分选功能 ......................................................................................................................... 5-45.7表头指示选择 .................................................................................................................. 5-45.8测试端测量/放电状态的选择 ........................................................................................... 5-4第6章保修................................................................................................................................. 6-1第7章附录................................................................................................................................. 7-17.1错误消息 ......................................................................................................................... 7-17.2开机默认值...................................................................................................................... 7-27.3手册更改说明 .................................................................................................................. 7-3第1章概述感谢您购买和使用我公司产品，在您使用本仪器前首先请根据说明书最后一章“成套和保修”的事项进行确认，若有不符请尽快与我公司联系，以维护您的权益。

B-12Order OnlineOver 100,000 Products Available!®To download information and to order pH Field andLab Instrument products online, visit SpecificationsRange: 0.0 to 14.0 pH Resolution: 0.1 pHAccuracy: ±0.2 pH at 20°C (68°F)Typical EMC Deviation: ±0.2 pHCalibration: Manual 2 point at pH 4 and 7Setpoint: Adjustable from 3.0 to 11.0 pHAlarm: LED blinks when pH is outside setpoint by more than ±0.5 pHElectrode: PHE-720 double junction, PTFE diaphragm pH electrode with 2 m (6.6') cable and BNC connector (included)Power Supply: External 12 Vdc (included)Environment: 0 to 50°C (32 to 122°F); 100% RHDimensions: 86 L x 94 W x 33 mm D (3.4 x 3.7 x 1.3")Weight: 150 g (5.3 oz)Water-Resistant pH Indicator with Visual AlarmU Selectable Setpoint in a Wide Range U One or Two Point Calibration U Water-Resistant Enclosure U E xternal 12 Vdc Power Supply for Continuous MonitoringThe PHH-720 is a water-resistant pH meterwith a built-in 3¹⁄₂-digit LCD. The meter is supplied with the PHE-720 double-junction, plastic- body, gel-filled combination pH electrodewith 2 m (6.6') cable and BNC connector protected by a waterproof sheath. The electrode has a unique clogging-resistant PTFE diaphragm.The alarm setpoint can be selected anywhere in the 3 to 11 pH range. A red LED warns the user in the event the reading is outside the setpoint by more than ±0.5 pH. Calibration can be manually performed at 1 or 2 points through two easily accessible trimmers on the front of the unit. The meter is suited for outdoor installations and highly humid environments. The casing has also been specially designed to give maximum stability and prevent rolling from any surface. In addition, a molded hook allows the meter to be easily installed close to the sample. The 12 Vdc power supply is ideal for continuous monitoring over extended periods of time. PHH-720 is supplied complete with pH electrode, calibration key, power supply and instructions.PHH-720and operator’s manual.Ordering Example: PHH-720, pH indicator with alarm.PHA-7 buffer solution.PHE-720 electrode included.PHH-720, comes with pH electrode, calibration key, 12 Vdc power supply and operator’s manual.。

PM3000A电力分析仪操作介绍PM3000A电力分析仪是一款功能强大的仪器，广泛应用于电力系统的分析和测试。

本文将介绍PM3000A电力分析仪的基本操作方法和常用功能。

操作步骤以下是PM3000A电力分析仪的基本操作步骤：1. 连接电源和被测电路首先，将PM3000A电力分析仪连上电源，并使用连接线将被测电路与仪器进行连接。

确保连接线的接触良好，以确保精确的测量结果。

2. 打开电力分析仪按下电力分析仪的电源按钮，待其开机启动完毕。

3. 设置测量参数在主界面上，您可以看到多个测量参数选项。

按照您的需求，选择相应的参数进行测量。

例如，您可以选择测量电压、电流、功率因数等。

4. 进行实时测量一旦设置好测量参数，您可以开始进行实时测量。

通过观察仪器的显示屏，您可以实时查看被测电路的电力参数。

如果需要，您还可以将这些数据记录下来，以便后续分析。

5. 分析测量结果PM3000A电力分析仪还具备数据分析功能。

您可以使用仪器提供的分析工具来分析测量结果。

例如，您可以生成报表、绘制曲线图等。

常用功能1. 仪器校准为确保测量结果的准确性，定期进行仪器校准非常重要。

PM3000A 电力分析仪提供了自动校准功能，您可以按照仪器的提示进行操作。

2. 数据存储和传输PM3000A电力分析仪可以将测量数据存储到内部存储器中，也可以通过USB接口将数据传输到电脑或其他存储设备。

这样，您可以随时随地方便地查看和分析测量数据。

3. 功率因数测量PM3000A电力分析仪支持功率因数测量，可以帮助您分析系统的功率因数及其对电力质量的影响。

通过实时测量和数据分析，您可以优化电力系统的功率因数，并采取相应的措施来提高电力质量。

4. 功率波形分析除了基本的电力参数测量外，PM3000A电力分析仪还具备功率波形分析功能。

通过对功率波形的分析，您可以了解电力系统中的谐波情况，并采取相应的措施来减少谐波对系统的影响。

总结通过本文的介绍，您已了解PM3000A电力分析仪的基本操作方法和常用功能。

Data SheetVoltage & Continuity Tester Rugged and easy to use testers for live voltage and continuity checks. Built in shaker provides the same functionality and feel as older analog solenoid testers with benefit of full input protection to CAT IV 600V / CAT III 1000V.VPC-31n Super-bright bi-Color LED’s indicates safe and dangerous voltages (above 55VDC or 30VAC)n Auto hold feature - LED’s stay illuminated for 10 sec retaininga reading after the tests are disconnectedn Solenoid tester-like shaker to indicate AC voltage presencen Automatically turns ON and OFF for easy and quick measurementsData Sheet VPC-31 Voltage & Continuity TesterSpecificationsLCD Display 3 digits 1000 countsIn an RF Field of 3V/m, total accuracy = Specified accuracy + 45d. Performance above 3V/m is notspecifiedUpdate Rate 5 per second nominalOperating Temperature -10ºC ~ 55ºC (14ºF ~ 131ºF)Relative Humidity Maximum relative humidity 80% for temperature up to 31ºC (87ºF) decreasing linearly to 50%relative humidity at 55ºC (131ºF)Altitude Operating below 2000mStorage Temperature -20ºC ~60ºC (-4ºF ~ 140ºF), < 80% R.H. (with battery removed)Temperature C oefficient Nominal 0.15 x (specified accuracy)/ ºC @ (-10ºC ~ 18ºC or 28ºC ~ 55ºC), or otherwise specified Sensing Average sensingType of Protection IP65Pollution Degree 2E.M.C. Meets EN61326-1:2006 (EN55022, EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3,EN61000-4-4, , EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11): For both models:Performance is specified in an RF Field of 3V/m. Performance above 3V/m is not specified.Safety Meets EN61010-1 and IEC61010-1 2nd Edition (2001)Measurement Category CAT III 1000V & CAT IV 600V AC & DCTransient Protection 8kV lightning surge (1.2/50µs)Overload Protection 1000VDC & VAC rmsLow Battery Below approx. 2.4VPower Supply Standard 1.5V AAA Size (NEDA 24G or IEC R03) battery X 2; or 1.5V AAA Size (NEDA 24A or IEC LR03)alkaline battery X 2Power Consumption (typical) 3mA at Power-on ready; 30mA at 1000VAC full LED indication. 75mA at 1000VAC with shaker ON APO Consumption (typical) 10µAAPO Timing Idle for 30 secondsDimension 233(L) x 57(W) x 40(H)mm (9.17 x 2.24 x 1.57 in)Weight Approx. 220 g (0.485 lb)Special Features High Input Impedance, Indicator Self-Test, Auto-Hold, Overload-Alert Warning, EF-Detection,Auto Display Backlit, AC-Detection Shaker, Bi-Color LED Hazardous Live Warning, and GFCI LeakageLoadAccessories Detachable (Black) Test Lead, Screw-on Stationary (Red) Probe, 2 Screw-on 4mm Probe Tips,batteries installed and User’s manualData Sheet VPC-31 Voltage & Continuity TesterElectrical SpecificationAccuracy is given as +/- (% of reading digits + number of digits) or otherwise specified @ 23oC +/- 5oC and less than 75% R.HDC & AC Voltage (LED)DCV MARKING Typical Threshold ACV MARKING Typical Threshold 6V 5V 24V 19V12V 10V 48V 38V24V 19V 120V 96V36V 30V 208V 166V48V 42V 240V 224V60V 54V 277V 259V72V 66V 347V 312V110V 91V 480V 414V220V 176V 600V 540V380V 304V 1000V 800VInput Impedance460k, 160pF nominalACV Frequency Response45Hz ~ 65HzContinuous dutyDuty ratioDC & AC VoltageRange Typical Threshold AccuracyDC 999V > +5VDC or < -5VDC 1.0%+2dAC 999V (50Hz/60Hz) > 15VAC 2.5%+4dInput Impedance: 460k, 160pF nominalDuty ratio: Continuous dutyAC Detection Shaker ThresholdShaker ON> 24VAC nominalShaker OFF< 14VAC nominalData SheetGFCI Leakage Load GFCI Leakage Load feature is for 120V nominal circuits only. It is disabled above 132V and below 80V Load Current 7.5 mA typical at 120VPath Impedance16 k nominal, PTC protectedNon-Contact EF-Detection IndicationEF LED flashing & audible beep tones proportional to the field strength Detection Frequency 50/60HzDetection AntennaTop end of the meterProbe-Contact EF-Detection For more precise indication of live wires, such as distinguishing between live and groundconnections, use the Red (+) test probe for direct contact measurements.VPC-31 also displays Bar graph segments proportional to the field strength on LCD. Typical values are shown in the following table:Typical Non-Contact Voltage Range LCD Bar Graph Indication15V to 55V - 30V to 95V - - 55V to 170V - - - Above 120V- - - -Included Accessories Test Leads Carrying Case Bead Type,Thermocouple with banana plug Users Manual©2009 Amprobe Test Tools. All rights reserved.12/2009 3520322 Rev AAmprobe® Test Toolswebsite: email:****************Everett, WA 98203 Tel: 877-AMPROBEAmprobe® Test Tools Europe In den Engematten 1479286 Glottertal, Germany Tel.: +49 (0) 7684 8009 - 0VPC-31 Voltage & Continuity Tester。