丙烯酰：亚甲基双丙烯酰胺40%,371

NCE N-Channel Enhancement Mode Power MOSFETDescriptionThe NCE40H12 uses advanced trench technology and design to provide excellent R DS(ON) with low gate charge. It can be used in a wide variety of applications.General Features● V DS =40V,I D =120AR DS(ON) <4 m Ω @ V GS =10V R DS(ON) <7 m Ω @ V GS =4.5V● High density cell design for ultra low Rdson ● Fully characterized avalanche voltage and current ● Good stability and uniformity with high E AS ● Excellent package for good heat dissipation ● Special process technology for high ESD capabilityApplication● Load switching● Hard switched and high frequency circuits ● Uninterruptible power supply100% UIS TESTED!100% ∆Vds TESTED!Schematic diagramMarking and pin assignmentTO-220-3L top viewPackage Marking and Ordering InformationDevice MarkingDeviceDevice PackageReel SizeTape widthQuantityNCE40H12 NCE40H12 TO-220-3L-- -Absolute Maximum Ratings (T C =25℃unless otherwise noted)Parameter Symbol Limit UnitDrain-Source Voltage V DS 40 V Gate-Source Voltage V GS ±20 V Drain Current-ContinuousI D 120 ADrain Current-Continuous(T C =100℃) I D (100℃) 85 A Pulsed Drain Current I DM 330 A Maximum Power Dissipation P D 130 W Derating factor0.87 W/℃Single pulse avalanche energy (Note 5)E AS 1080 mJOperating Junction and Storage Temperature RangeT J ,T STG-55 To 175℃Thermal CharacteristicThermal Resistance,Junction-to-Case (Note 2)R θJC1.15/W ℃Electrical Characteristics (T C =25℃unless otherwise noted)ParameterSymbolCondition Min Typ Max UnitOff CharacteristicsDrain-Source Breakdown Voltage BV DSS V GS =0V I D =250μA 40 45 - V Zero Gate Voltage Drain Current I DSS V DS =40V,V GS =0V -- 1 μA Gate-Body Leakage Current I GSS V GS =±20V,V DS =0V - - ±100 nA On Characteristics (Note 3) Gate Threshold VoltageV GS(th) V DS =V GS ,I D =250μA 1.2 1.9 2.5 V V GS =10V, I D =20A - 3.2 4.0Drain-Source On-State Resistance R DS(ON) V GS =4.5V, I D=10A - 5.5 7.0 m ΩForward Transconductance g FSV DS =10V,I D =20A 26 - - SDynamic Characteristics (Note4) Input Capacitance C lss - 5400 - PF Output CapacitanceC oss - 970 - PFReverse Transfer Capacitance C rssV DS =20V,V GS =0V,F=1.0MHz- 380 - PF Switching Characteristics (Note 4) Turn-on Delay Time t d(on) - 15 - nSTurn-on Rise Time t r - 18 - nS Turn-Off Delay Time t d(off) - 52 - nSTurn-Off Fall Time t fV DD =20V,I D =2A,R L =1Ω V GS =10V,R G =3Ω - 23 - nSTotal Gate Charge Q g - 75 nCGate-Source Charge Q gs - 10.5 nCGate-Drain ChargeQ gd V DS =20V,I D =20A,V GS =10V- 17 nC Drain-Source Diode Characteristics Diode Forward Voltage (Note 3) V SDV GS =0V,I S =40A -1.2 V Diode Forward Current (Note 2)I S - - 120 A Reverse Recovery Time t rr - 42 - nS Reverse Recovery Charge Qrr TJ = 25°C, IF = 40Adi/dt = 100A/μs (Note3)- 45 - nCForward Turn-On Timet onIntrinsic turn-on time is negligible (turn-on is dominated by LS+LD)Notes:1. Repetitive Rating: Pulse width limited by maximum junction temperature.2. Surface Mounted on FR4 Board, t ≤ 10 sec.3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%.4. Guaranteed by design, not subject to production5. E AS condition : Tj=25℃,V DD =20V,V G =10V,L=1mH,Rg=25Ω，I AS =46.5ANCE40H12Pb Free ProductTest circuit1) E ASTest Circuit2) Gate Charge Test Circuit3) Switch Time Test CircuitTypical Electrical and Thermal Characteristics (Curves)Vds Drain-Source Voltage (V)Figure 1 Output CharacteristicsVgs Gate-Source Voltage (V)Figure 2 Transfer CharacteristicsI D - Drain Current (A)Figure 3 Rdson- Drain CurrentT J -Junction Temperature(℃)Figure 4 Rdson-JunctionTemperatureQg Gate Charge (nC)Figure 5 Gate ChargeVsd Source-Drain Voltage (V)Figure 6 Source- Drain Diode ForwardR d s o n O n -R e s i s t a n c e (m Ω)I D - D r a i n C u r r e n t (A )I D - D r a i n C u r r e n t (A )N o r m a l i z e d O n -R e s i s t a n c eV g s G a t e -S o u r c e V o l t a g e (V )I s - R e v e r s e D r a i n C u r r e n t (A )Vds Drain-Source Voltage (V)Figure 7 Capacitance vs VdsVds Drain-Source Voltage (V)Figure 8 Safe Operation AreaT J -Junction Temperature (℃)Figure 9 Power De-ratingT J -Junction Temperature(℃)Figure 10 V GS(th) vs Junction TemperatureI D - D r a i n C u r r e n t (A )C C a p a c i t a n c e (p F )Square Wave Pluse Duration(sec)Figure 11 Normalized Maximum Transient Thermal Impedancer (t ),N o r m a l i z e d E f f e c t i v e T r a n s i e n t T h e r m a l I m p e d a n c eP o w e r D i s s i p a t i o n (W )TO-220-3L Package InformationDimensions In Millimeters Dimensions In Inches SymbolMin.Max.Min.Max.A 4.400 4.600 0.173 0.181A1 2.250 2.550 0.089 0.100b 0.710 0.910 0.028 0.036b1 1.170 1.370 0.046 0.054c 0.330 0.650 0.013 0.026c1 1.200 1.400 0.047 0.055D 9.910 10.250 0.390 0.404E 8.9500 9.750 0.352 0.384E1 12.650 12.950 0.498 0.510e 2.540 TYP. 0.100 TYP.e1 4.980 5.180 0.196 0.204F 2.650 2.950 0.104 0.116H 7.900 8.100 0.311 0.319h 0.000 0.300 0.000 0.01213.400 0.508 0.528L 12.900L1 2.850 3.250 0.112 0.128 V 7.500 REF. 0.295 REF.Φ 3.400 3.800 0.134 0.150Attention:■Any and all NCE power products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your NCE power representative nearest you before using any NCE power products described or contained herein in such applications.■ NCE power assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all NCE power products described or contained herein.■Specifications of any and all NCE power products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment.■ NCE power Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design.■ In the event that any or all NCE power products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law.■No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of NCE power Semiconductor CO.,LTD.■Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. NCE power believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.■ Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the NCE power product that you intend to use.■This catalog provides information as of Sep.2010. Specifications and information herein are subject to change without notice.。

金丰2号棉种审定公告一、引言金丰2号棉种是一种新型的棉花种植品种，经过审定后正式发布。

本文将详细介绍金丰2号棉种的审定公告内容，包括审定的背景、审定的过程和结果等。

二、审定背景为了提高我国棉花的品质和产量，推动棉花产业的发展，农业部决定对新品种金丰2号棉种进行审定。

金丰2号棉种是由农业科学研究院研发的一种新型棉花品种，具有抗病虫害、高产、优质等特点，有望在我国棉花种植业中发挥重要作用。

三、审定过程3.1 申请材料的准备农业科学研究院在申请金丰2号棉种审定之前，先进行了大量的实验和研究工作。

他们收集了金丰2号棉种的相关数据和试验结果，并编制了详细的申请材料，包括品种特征、栽培技术、产量和品质等方面的数据。

3.2 专家组的评审农业部组织了由专家组成的评审团队，对金丰2号棉种的申请材料进行评审。

评审专家对申请材料进行了仔细研究，并进行了多次讨论和交流。

他们结合自己的专业知识和实践经验，对金丰2号棉种的品质、产量、抗病虫害等方面进行了全面评估。

3.3 田间试验为了验证金丰2号棉种的表现和性状，农业科学研究院进行了大规模的田间试验。

他们在不同的地区和环境条件下，种植了金丰2号棉种，并对其进行了观察和记录。

通过田间试验，他们进一步验证了金丰2号棉种的抗病虫害能力、适应性和产量等方面的特点。

3.4 结果公示和听证会在评审过程结束后，农业部公示了金丰2号棉种审定的初步结果，并组织了听证会。

听证会上，各方对金丰2号棉种的审定结果提出了自己的意见和建议。

农业部在听取各方意见的基础上，对审定结果进行了进一步的调整和完善。

3.5 最终审定结果经过上述的各项工作，农业部最终确定了金丰2号棉种的审定结果。

根据评审专家的意见和田间试验的结果，金丰2号棉种被认定为一种具有优良品质和高产能力的棉花品种。

农业部决定正式发布金丰2号棉种的审定公告，并推广其种植和应用。

四、审定结果根据农业部的审定公告，金丰2号棉种具有以下特点和优势： 1. 抗病虫害能力强：金丰2号棉种对多种棉花常见病虫害具有较高的抵抗力，能够减少农药的使用。

糠醛二线基础油参数引言糠醛二线基础油是一种重要的化工原料，广泛应用于润滑油、涂料、胶粘剂等领域。

本文将详细介绍糠醛二线基础油的参数，包括物理性质、化学性质、生产工艺等方面，以便更好地了解和应用这一产品。

物理性质糠醛二线基础油的物理性质是衡量其品质和适用性的重要指标之一。

以下是常见的物理性质参数：密度密度是指单位体积内所含物质的质量。

糠醛二线基础油的密度通常在0.85-0.95g/cm³之间，可以根据具体需求进行调整。

粘度粘度是指流体抵抗流动的程度。

糠醛二线基础油的粘度范围较广，通常在10-1000 mm²/s之间，可根据不同应用领域进行选择。

闪点闪点是指在特定条件下液体蒸发产生可燃气体与空气混合后能被引燃的最低温度。

糠醛二线基础油的闪点通常在100-200℃之间，具有较高的安全性。

凝固点凝固点是指液体在降温过程中开始结晶凝固的温度。

糠醛二线基础油的凝固点通常在-10℃以下，适用于低温环境下的使用。

可溶性可溶性是指糠醛二线基础油与其他物质之间的相容性和溶解性。

糠醛二线基础油具有良好的可溶性，可以与多种添加剂和其他润滑剂进行混合使用。

化学性质除了物理性质外，糠醛二线基础油的化学性质也是评价其品质和适用性的重要因素。

以下是常见的化学性质参数：酸值酸值是指单位质量内含有的总酸量。

糠醛二线基础油通常具有较低的酸值，一般在0.01 mgKOH/g以下。

碱值碱值是指单位质量内所需要加入碱液以中和其中所有强酸的量。

糠醛二线基础油的碱值通常较低，一般在0.01 mgKOH/g以下。

水分水分是指糠醛二线基础油中所含的水的含量。

糠醛二线基础油通常要求水分含量低于0.05%。

硫含量硫含量是指糠醛二线基础油中所含的硫元素的百分比。

糠醛二线基础油通常要求硫含量低于0.5%。

生产工艺糠醛二线基础油的生产工艺对其品质和性能有着重要影响。

以下是生产工艺中常用的步骤：原料准备选择优质稻谷作为原料，经过清洗、脱壳等处理，得到高纯度的稻壳。

40%乙二醛溶液熔点英文回答：Melting Point of 40% Glyoxal Solution.Glyoxal, also known as ethanedial, is an organic compound with the formula CHOCHO. It is a colorless liquid with a pungent odor. Glyoxal is used in the production of textiles, dyes, and pharmaceuticals.A 40% glyoxal solution is a mixture of 40% glyoxal and 60% water. The melting point of a 40% glyoxal solution is -12°C (10.4°F). This is lower than the melting point of pure glyoxal, which is -15°C (5°F).The melting point of a solution is the temperature at which the solid and liquid phases of the solution are in equilibrium. At the melting point, the solid and liquid phases have the same vapor pressure. The melting point of a solution is affected by the concentration of the solution.The more concentrated the solution, the lower the melting point.The melting point of a 40% glyoxal solution can be used to determine the concentration of the solution. If the melting point of a solution is lower than the melting point of pure glyoxal, then the solution is more concentratedthan 40%. If the melting point of a solution is higher than the melting point of pure glyoxal, then the solution isless concentrated than 40%.中文回答：40%乙二醛溶液的熔点。

河南农业2017年第4期（上）田间覆盖率为75％左右，一年生阔叶杂草主要以播娘蒿、荠荠菜为优势种群，杂草平均株高5~8 cm，生育期主要为3~5叶期。

三、试验设计和安排（一）药剂1.试验药剂双氟磺草胺·二甲四氯异辛酯（40%悬浮剂）（河南金田地农化有限责任公司提供）。

2.对照药剂双氟磺草胺（50 g/L 悬浮剂）（美国陶氏益农公司生产，市售品）。

二甲四氯钠（56%可溶性粉剂）（山东盛邦绿野化学有限公司生产，中午进行；人工除草于喷药结束后随即进行，用铁锄浅锄1遍，力求均匀一致。

4.施用容量喷液量为750 L/hm 2。

5.防治病虫和非靶标杂草药剂资料于2015年3月21日施用12.5% 烯唑醇可湿性粉剂防治小麦纹枯病1次，4月16日施用10%吡虫啉可湿性粉剂防治小麦蚜虫1次， 5月4日施用2.5%高效氯氰菊酯乳油和50%多菌灵可湿性粉剂防治小麦蚜虫、赤霉病1次，未使用除草剂防治其他杂草。

于2014年12月15日和2015年3月15日各浇水1次，于2015年3月21日施用12.5%烯唑醇可湿性粉剂防治小麦纹枯病1次，4月16日施用10%吡虫啉可湿性粉剂防治小麦蚜虫1次， 5月4日施用2.5%高效氯氰菊酯乳油和50%多菌灵可湿性粉剂防治小麦蚜虫、赤霉病1次。

(二)调查方法、时间和次数共调查3次，分别为2015年3月7日（施药当天），3月27日（施药后20 d），4月16日（施药后40 d）。

(三)杂草调查调查采用5点取样法，每小区双氟磺草胺·二甲四氯异辛酯（40%NONG YAO YU ZHI BAO农药与植保河南农业2017年第4期（上）NONG YAO YU ZHI BAO农药与植保空白对照区每667 m 2产量五、结果与分析由试验结果可知：通过施药后观察，试验各小区处理对小麦生长均安全、无药害。

供试药剂双氟磺草胺·二甲四氯异辛酯（40%悬浮剂）对冬小麦田一年生阔叶杂草具有较好防除效果，其有效成分300 g/hm 2、360 g/hm 2、420 g/hm 2、720 g/hm 24个处理，药后20 d 株防效分别达78.70%、85.23%、88.56%、91.47%；药后40 d 株防效分别达83.67%、89.11%、92.22%、94.70%，药后40 d 鲜质量防效分别个处理间无显著性差异，供试药剂双氟磺草胺·二甲四氯异辛酯（40%悬浮剂）有效成分360 g/hm 2与人工除草间无显著性差异，供试药剂双氟磺草胺·二甲四氯异辛酯（40%悬浮剂）有效成分300 g/hm 2与人工除草间无显著性差异，上述各小区处理均与对照药剂二甲四氯钠（56%可溶性粉剂）有效成分672 g/hm 2存在差异显著性。

GP02-20 THRU GP02-40HIGH VOLTAGE GLASS PASSIVATED JUNCTION RECTIFIERReverse Voltage -2000 to 4000 Volts Forward Current -0.25 AmpereFEATURES♦ Plastic package has Underwriters LaboratoryFlammability Classification 94V-0♦ High temperature metallurgically bonded construction♦ Glass passivated cavity-free junctions♦ Capable of meeting environmental standards of MIL-S-19500♦ High temperature soldering guaranteed:350°C/10 seconds, 0.375" (9.5mm) lead length,5 lbs.(2.3kg) tensionMECHANICAL DATARatings at 25°C ambient temperature unless otherwise specified.GP02GP02GP02GP02GP02SYMBOLS-20-25-30-35-40UNITSMaximum repetitive peak reverse voltage V RRM 20002500300035004000Volts Maximum RMS Voltage V RMS 14001750210024502800Volts Maximum DC blocking voltageV DC 20002500300035004000Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at T A =55°CI (AV)0.25Amp Peak forward surge current8.3ms single half sine-wave superimposed on rated load at:I FSM 15.0Amps (JEDEC Method)T A =55°C Maximum instantaneous forward voltage at 1.0A V F 3.0Volts Maximum DC reverse current T A = 25°C 5.0at rated DC blocking voltageT A =100°CI R 50.0µA Typical reverse recovery time (NOTE 1)t rr 2.0µs Typical junction capacitance (NOTE 2)C J 3.0pF Typical thermal resistance (NOTE 3)R ΘJA 130.0°C/W Operating junction and storage temperature rangeT J , T STG-65 to +175°CNOTES:(1) Reverse recovery test conditions:I F =0.5A, I R =1.0A, I rr =0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P .C.B.mounted4/98P A1.03.04.05.06.07.08.00751501750.050.10.150.20.25 2.00.0110.111010002.03.04.05.06.01010015105.01100.11.0025501001250.011100.120406080100RATINGS AND CHARACTERISTIC CURVES GP02-20 THRU GP02-40FIG.1 - FORWARD CURRENT DERATINGAMBIENT TEMPERATURE, °CA V E R A G E F O R W A R D R E C T I F I E D C U R R E N T , A M P E R E SFIG.2 - MAXIMUM NON-REPETITIVE PEAKFORWARD SURGE CURRENTNUMBER OF CYCLES AT 60 H ZP E A K F O R W A R D S U R G E C U R R E N T , A M P E R E SFIG.3 - TYPICAL INSTANTANEOUS FORWARDCHARACTERISTICSFIG.4 - TYPICAL REVERSE CHARACTERISTICSI N S T A N T A N E O U S F O R W A R D C U R R E N T ,A M P E R E SI N S T A N T A N E O U S R E V E R S E L E A K A G E C U R R E N T , M I C R O A M P E R E SINST ANT ANEOUS FORWARD VOLT AGE,VOLTSPERCENT OF RATED PEAK REVERSEVOLT AGE, %FIG.5 - TYPICAL JUNCTION CAPACITANCEJ U N C T I O N C A P A C I T A N C E , p FREVERSE VOLT AGE, VOLTST J =100°CT J =25°CT J =25°CPULSE WIDTH=300µs 1%DUTY CYCLET J =25°C f=1.0 MH ZVsig=50mVp-p0.375" (9.5mm)LEAD LENGTH60 H Z RESISTIVE OR INDUCTIVE LOADT J =T J max.8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)。

BC防老剂4020的性能和用途D4020又称防老剂DMBPPO，密度0.986-1.00。

熔点7.3.6℃。

温度超过35-40℃时会慢慢结块。

溶于苯、丙酮、乙酸乙酯、二氯乙烷、甲苯，不溶于水。

暴露于空气中颜色变深。

防老剂4020雨后淋水检验记录是轮胎特别是子午胎生产用重要添加剂。

产品供求分析A生产现状目前世界上主要对苯二胺类橡胶防老剂生产企业有美荷联营的富兰克斯公司、美国开普顿公司、捷克的爱格富集团、德国朗盛公司等，这四家公司拥有全球约80%B2005年我国对苯二胺类橡胶防老剂生产能力约为42kt/aC4020的生产能力为24kt/a，主要生产企业采取重复建设新生产线的方法来扩大生产能力。

D橡胶防老剂4020目前国内共有七家企业生产，其中主要的两家分别是南化公司化工厂和山东圣奥化工有限公司，生产能力约占全国生产能力的75%8.1.4国外一些跨国公司早已开始调整生产布局，减少生产布点，通过提高单套装置能力来提高总体生产规模，实现规模效益。

德国朗盛公司与铜峰股份有限公司和铜陵信达化工公司合作生产对苯二胺类橡胶防老剂及其中间体项目于2006年开始启动，计划建设20kt/a 防老剂4020及配套中间体对氨基二苯胺项目；德国艾尔派克公司独资成立的镇江爱扬化工有限公司，总投资1600万美元生产高端橡胶助剂项目；英国斯夫特实业有限公司决定投资2700万美元在山东宁阳县建设年产4A万吨橡胶防老剂项目，项目签约仪式已于2005年B月1日举行。

另外国际C橡胶助剂巨头富莱克斯公司和康普顿公司一直与国内相关企业和部门洽谈，寻求合作生产橡胶助剂，主要意向集中在对苯二胺类和喹啉类防老剂方面。

D需求预测我国橡胶防老剂大致分为对苯二胺类、RD、二苯胺类、酚类、其他等5细部构造2-1。

设计要求，施工措施，观察记录2-1我国橡胶防老剂消费比例AB防老剂品种C比例（%D11、对苯二胺类B 表示可能违反强制性条文，经检测单位检测，设计单位核定后，再判定；C 表示违反强制性条文；D 表示严重违反强制性条文。

2号岩石乳化包装规格
【最新版】
目录
1.2 号岩石乳化包装的概述
2.2 号岩石乳化包装的规格
3.2 号岩石乳化包装的注意事项
正文
【2 号岩石乳化包装的概述】
2 号岩石乳化剂是一种常用于岩石钻探和开采的化学物质。

它能够在岩石表面形成一层润滑膜，降低岩石之间的摩擦力，从而使岩石更容易钻透或开采。

为了方便使用和储存，2 号岩石乳化剂通常需要进行包装。

【2 号岩石乳化包装的规格】
2 号岩石乳化包装的规格主要包括包装材料、包装容量、包装数量等方面。

常见的包装材料有塑料桶、铁桶等，这些材料需要具有一定的耐化学性，以防止乳化剂对包装材料的腐蚀。

包装容量通常有 50L、100L、200L 等不同规格，用户可以根据自己的需要进行选择。

包装数量则通常以一桶或一箱为单位，具体的数量可以根据用户的需要进行调整。

【2 号岩石乳化包装的注意事项】
在使用 2 号岩石乳化包装时，需要注意以下几点：首先，选择合适的包装材料，确保包装材料具有一定的耐化学性，以防止乳化剂对包装材料的腐蚀。

其次，根据实际需要选择合适的包装容量和数量，避免包装过大或过小，影响使用效果或造成浪费。

第1页共1页。

Aspen 2The safety data sheet is in accordance with Commission Regulation (EU) 2015/830 of 28 May 2015 amending Regulation (EC) No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)Date issued10.03.20161.1. Product identifierProduct name Aspen 2Synonyms Aspen 2 Full Range Technology, Aspen 2t1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/preparation Fuel for petrol engines.Relevant identified uses SU1 Agriculture, forestry, fisheryPC13 FuelsPROC16 Using material as fuel sources, limited exposure to unburnedproduct to be expected Industrial or non-industrial setting;YesThe chemical can be used by thegeneral public1.3. Details of the supplier of the safety data sheetDistributorCompany name Anglo American Oil Company LtdOffice address58 Holton RoadPostal address Holton Heath Trading ParkPostcode BH16 6LTCity PooleCountry United KingdomTel+44 1929 551557Fax+44 1929 551567E-mailWebsite ManufacturerCompany name Lantmännen Aspen ABPostal address Iberovägen 2Postcode SE-438 54City HindåsCountry SwedenTel+46 (0)301-23 00 00E-mailWebsite http://www.aspen.se/United_KingdomContact person Pontus Kristensson, +46 (0)708-23 50 201.4. Emergency telephone numberEmergency telephone National Poisons Information Centre:01-80925662.1. Classification of substance or mixtureClassification according to Regulation (EC) No 1272/2008 [CLP/GHS]Flam. Liq. 1 Asp. tox 1Skin Irrit. 2 STOT SE3 Aquatic Chronic 4 H224H304H315H336H4132.2. Label elementsSignal word DangerHazard statements H224 Extremely flammable liquid and vapour. H304 May be fatal if swallowedand enters airways. H315 Causes skin irritation. H336 May cause drowsinessor dizziness. H413 May cause long lasting harmful effects to aquatic life. Precautionary statements P102 Keep out of reach of children. P210 Keep away from heat/sparks/openflames/hot surfaces. No smoking. P260 Do not breathedust/fume/gas/mist/vapours/spray. P262 Do not get in eyes, on skin, or onclothing. P301 + P310 IF SWALLOWED: Immediately call a POISONCENTER/ doctor/ . P331 Do NOT induce vomiting. P501 Dispose ofcontents/container according to local regulations.Child-protection YesTactile warnings Yes2.3. Other hazardsHealth effect In high concentrations, vapours and aerosol mists have a narcotic effect andmay cause headache, fatigue, dizziness and nausea.3.2. MixturesSubstance Identification Classification Contents Naphtha (petroleum), full-rangealkylate, butane-contg.CAS no.: 68527-27-5EC no.: 271-267-0Registration number: 01-2119471477-29-XXXXFlam. Liq. 1; H224;Asp. tox 1; H304;Skin Irrit. 2; H315;STOT SE3; H336;Aquatic Chronic 2; H411;85 - 95 %Naphtha (petroleum), isomerization CAS no.: 64741-70-4EC no.: 265-073-5Index no.: 649-277-00-5Registration number: 01-2119480399-24-XXXXFlam. Liq. 1; H224Asp. tox 1; H304Skin Irrit. 2; H315STOT SE3; H336Aquatic Chronic 2; H4115 - 15 %Fully synthetic two stroke oil= 2 % Remarks, substance Benzene level lower than 0,1 %.The classification of the components is not supported by test results on themixture.The two stroke oil is not classified as dangerous for the health or theenvironment.4.1. Description of first aid measuresGeneral Fire and explosion: Leave the zone of danger immediately and evacuateunnecessary personnel. Bring injured persons out of the zone of dangerimmediately. Beware of danger of shock in seemingly not-injured persons. Inhalation Fresh air and rest.Skin contact Remove contaminated clothing immediately and wash skin with soap andwater.Eye contact Immediately rinse with water for several minutes. Make sure to remove anycontact lenses from the eyes before rinsing.Ingestion DO NOT induce vomiting if swallowed chemical is dissolved in petroleum-based material. Danger of aspiration and development of chemical pneumonia.Get medical attention.4.2. Most important symptoms and effects, both acute and delayedInformation for health personnel Treat Symptomatically.4.3. Indication of any immediate medical attention and special treatment needed Medical monitoring for delayedeffectsNo recommendation given.Specific details on antidotes Not applicable.5.1. Extinguishing mediaSuitable extinguishing media Extinguish with foam, carbon dioxide or dry powder. Do not use water jet asan extinguisher, as this will spread the fire.5.2. Special hazards arising from the substance or mixtureFire and explosion hazards Highly flammable liquid and vapour.5.3. Advice for firefightersFire fighting procedures Containers close to fire should be removed immediately or cooled with water.Avoid water in straight hose stream; will scatter and spread fire. Be aware ofrisk of fire re-starting, and risk of explosion.6.1. Personal precautions, protective equipment and emergency procedures Personal protection measures Do not smoke, use open fire or other sources of ignition. Ventilate well. Incase of inadequate ventilation, use respiratory protection. Take precautionarymeasures against static discharges.6.2. Environmental precautionsEnvironmental precautionary measures Avoid discharge into drains, water courses or onto the ground. Contain spillages with sand, earth or any suitable adsorbent material. Contact local authorities in case of spillage to drain/aquatic environment.6.3. Methods and material for containment and cleaning upCleaning method Remove sources of ignition. Beware of the explosion danger. Absorb invermiculite, dry sand or earth and place into containers. Cover large spillageswith foam.6.4. Reference to other sectionsOther instructions None.7.1. Precautions for safe handlingHandling Flammable/combustible - Keep away from oxidisers, heat and flames. Takeprecautionary measures against static discharges.7.2. Conditions for safe storage, including any incompatibilitiesStorage Store in tightly closed original container in a well-ventilated place. Store attemperature below 50°C. Flammable liquid storage.Special risks and properties Protect electric equipment against sparking in case of risk of explosion. Other Information Large amounts and storages should be stored in accordance with nationalregulation on storage of flammable liquids.Conditions To Avoid Keep away from heat, sparks and open flame.Conditions for safe storageAdvice on storage compatability Keep flammable liquids away from flammable gas and highly flammablegoods. Flammability class: 17.3. Specific end use(s)Specific use(s)The identified uses for this product are detailed in Section 1.2.8.1. Control parametersOEL Sweden. Alkylate petrol.Other Information about thresholdlimit valuesDNEL / PNECMethod of testing ContentsDNEL Group: WorkerExposure route: InhalationExposure frequency: Long term (repeated)Critical Component: 68527-27-5Type of effect: Local effectValue: 840 mg/m3/8hDNEL Group: WorkerExposure route: InhalationExposure frequency: Short term (acute)Critical Component: 68527-27-5Type of effect: Systemic effectValue: 1300 mg/m3/15 minExposure guidelines Country of origin: SwedenLimit value type: OEL, 8h, 900 mg/m3Source: AFS 2011:188.2. Exposure controlsRecommended monitoringEnvironmental Exposure Controls: VOC.proceduresPrecautionary measures to prevent exposureTechnical measures to preventProvide adequate general and local exhaust ventilation.exposureRespiratory protectionRespiratory protection No specific recommendation made, but respiratory protection may still berequired under exceptional circumstances when excessive air contaminationexists.Recommended type of equipment Chemical respirator with organic vapour cartridge.Reference to relevant standard A.All handling to take place in well-ventilated area.Additional respiratory protectionmeasuresHand protectionHand protection For prolonged or repeated skin contact use suitable protective gloves. Suitable gloves type Neoprene, nitrile, polyethylene or PVC.Eye / face protectionEye protection Wear approved chemical safety goggles where eye exposure is reasonablyprobable.Hygiene / EnvironmentalSpecific hygiene measures Promptly remove non-impervious clothing that becomes wet.DO NOT SMOKE IN WORK AREA!9.1. Information on basic physical and chemical propertiesPhysical state Clear liquid.Colour Tan.Odour Kerosene.Comments, pH (as supplied)Not applicable.Comments, pH (aqueous solution)Not applicable.Comments, Melting point / meltingNot applicable.rangeBoiling point / boiling range Value: 35-205 °CMethod of testing: EN ISO 3405Flash point Value: < 0 °CEvaporation rate Value: > 1000Method of testing: BuAc=1001 vol-%Lower explosion limit with unit ofmeasurement8 vol-%Upper explosion limit with units ofmeasurementVapour pressure Value: 55-65 kPaMethod of testing: EN 13016-1Test temperature: = 38 °CVapour density Value: > 1Reference gas: AirSpecific gravity Value: 690-720 kg/m3Method of testing: EN ISO 12185Solubility description Very soluble in: Hydrocarbons.Solubility in water1-6 mg/l at 1-10 % concentration.Partition coefficient: n-octanol/water Value: 4,3-4,8Spontaneous combustability Value: > 300 °CViscosity Value: < 1 mm2/sTest temperature: = 40 °C9.2. Other informationPhysical hazardsFlammable liquids Yes.Conductivity Value: < 0,1 uS/cmMethod of testing: EN 15938Test temperature: = 20 °CGas group IIA.10.1. ReactivityReactivity There are no known reactivity hazards associated with this product.10.2. Chemical stabilityStability Stable under normal temperature conditions and recommended use.10.3. Possibility of hazardous reactions10.4. Conditions to avoidConditions to avoid Avoid heat, flames and other sources of ignition.10.5. Incompatible materialsMaterials to avoid Strong oxidising substances.10.6. Hazardous decomposition productsHazardous decomposition products Thermal decomposition or combustion may liberate carbon oxides and othertoxic gases or vapours.11.1. Information on toxicological effectsToxicological Information:LD50 oral Value: > 5000 mg/kg bwAnimal test species: RatTest reference: OECD TG 401Comments: Data for CAS 68527-27-5.LD50 dermal Value: > 2000 mg/kg bwAnimal test species: RabbitTest reference: OECD TG 402Comments: Data for CAS 68527-27-5.LD50 dermal Value: > 5610 mg/m3 airAnimal test species: RatTest reference: OECD 403Comments: Data for CAS 68527-27-5.Toxicological data for substancesOther information regarding health hazardsGeneral Risk of chemical pneumonia after aspiration. Prolonged or repeated contactleads to drying of skin. Solvent vapours are hazardous and may causenausea, sickness and headaches.Potential acute effectsInhalation In high concentrations, vapours are narcotic and may cause headache,fatigue, dizziness and nausea.Skin contact Product has a defatting effect on skin.Eye contact Not Irritating.Ingestion Harmful: may cause lung damage if swallowed.Irritation Causes skin irritation.Delayed effects / repeated exposureSensitisation None.Carcinogenic, Mutagenic or ReprotoxicCarcinogenicity No known chronic or acute health risks.Mutagenicity No known chronic or acute health risks.Teratogenic properties No known chronic or acute health risks.Reproductive toxicity No known chronic or acute health risks.Symptoms of ExposureSymptoms of overexposure Mild intoxication (incl. fatigue, lassitude, irritability, headache, nausea).12.1. ToxicityAcute aquatic, fish Value: > 100 mg/lMethod of testing: OECD TG no. 203 (2004)Fish, species: Danio rerioDuration: 96hTest reference: Test report 046/13.Acute aquatic, fish, Comments LL50. Data for mixture.Acute aquatic, algae Value: > 100 mg/lMethod of testing: OECD TG no. 202Algae, species: Raphidoceles subcapitataDuration: 72hTest reference: Test report 182/06.Acute aquatic, algae, Comments EL50. Data for mixture.Acute aquatic, Daphnia Value: > 1000 mg/lMethod of testing: OECD Tg no. 201Daphnia, species: Daphnia MagnaDuration: 48hTest reference: Test report 31/04.Acute aquatic, Daphnia, Comments EL50. Data for mixture.12.2. Persistence and degradabilityComments COD Not known.Comments, BOD Not known.Persistence and degradability Volatile substances are degraded in the atmosphere within a few days. Theproduct is degraded completely by photochemical oxidation. The product hasnot proven to be degradable under anaerobic conditions.12.3. Bioaccumulative potentialBioaccumulative potential Bioaccumulation is unlikely to be significant because of the low water solubilityof this product.Bioconcentration factor (BCF)Value: 4,3-4,8Method of testing: Log KowComments, BCF Calculated value for mixture.12.4. Mobility in soilMobility The product contains volatile organic compounds (VOC) which will evaporateeasily from all surfaces. The product is insoluble in water and will spread onthe water surface.12.5. Results of PBT and vPvB assessmentPBT assessment results Not Classified as PBT/vPvB by current EU criteria.12.6. Other adverse effectsOther adverse effects / Remarks WATER HAZARD CLASSIFICATION : 2 (WGK).13.1. Waste treatment methodsSpecify the appropriate methods of disposal Make sure containers are empty before discarding (explosion risk). Vent to atmosphere.Relevant waste regulation SFS 2011:927Product classified as hazardouswasteYesPackaging classified as hazardouswasteNoEWC waste code EWC: 130702 petrolEWC: 150102 plasticpackagingEWC: 150104 metallicpackaging14.1. UN numberADR / RID / ADN1203RID1203IMDG1203ICAO/IATA120314.2. UN proper shipping nameADR PETROLRID PETROLIMDG PETROLICAO/IATA PETROL14.3. Transport hazard class(es)ADR / RID / ADN3RID3IMDG3ICAO/IATA314.4. Packing groupADR IIRID IIIMDG IIICAO/IATA II14.5. Environmental hazardsIMDG Marine pollutant No14.6. Special precautions for userRID Other applicable information(D/E)IMDG Additional information-18 C, c.c.EmS F-E, S-E14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code ADR / RID - Other informationADR additional information(D/E)Hazard no.3315.1. Safety, health and environmental regulations/legislation specific for the substance or mixtureReferences (laws/regulations)Regulation (EC) No 1907/2006 of the European Parliament and of the Councilof 18 December 2006 concerning the Registration, Evaluation, Authorisationand Restriction of Chemicals (REACH), establishing a European ChemicalsAgency, amending Directive 1999/45/EC and repealing Council Regulation(EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well asCouncil Directive 76/769/EEC and Commission Directives 91/155/EEC,93/67/EEC, 93/105/EC and 2000/21/EC, including amendments.Dangerous Preparations Directive 1999/45/EC.15.2. Chemical safety assessmentNoChemical safety assessmentperformedSupplier's notes The information on this data sheet represents our current data and is reliableprovided that the product is used under the prescribed conditions and inaccordance with the application specified on the packaging and/or in thetechnical guidance literature. Any other use of the product which involvesusing the product in combination with any other product or any other processis the responsibility of the user.Classification according to ; H224;Regulation (EC) No 1272/2008 [CLP/GHS]; H304; ; H315; ; H336; ; H413;List of relevant H-phrases (Section 2 and 3).H413 May cause long lasting harmful effects to aquatic life. H304 May be fatal if swallowed and enters airways.H336 May cause drowsiness or dizziness.H315 Causes skin irritation.H224 Extremely flammable liquid and vapour.H411 Toxic to aquatic life with long lasting effects.Important data sources used to construct the safety data sheet Test report 31/04. Aspen 4T, Daphnia magna immobilisation test. Toxicon AB (2004).Test report 182/06. Toxicity testing of Aspen 4T, Algae growth inhibition test. Toxicon AB (2007).Test report 07-25. Evaluation of the aerobic biodegradability of organic compounds 182/06 (Aspen 4T). AnoxKaldnes AB (2007).Examination essay. Diffusion of alkylate petrol during discharge in the environment. Gunilla Henriksson, Annalena Tåmt (2004).Test report 046/13. Aspen 4. Fish, acute toxicity test. Toxicon AB (2013). Kemiska Ämnen. Prevent AB (2013).Information which has been added,deleted or revisedChange to Sections: 1, 12. Replaces 13.01.2016. Version1URL for technical data http://www.aspen.seResponsible for safety data sheet Lantmännen Aspen ABPrepared by Lantmännen Aspen AB。