富士通模块中文菜单

富士通存储操作手册一．登陆方式和基本信息查看1.首先在IE中输入富士通存储管理IP进入页面2.点击ETERUNS，进入登陆界面。

3.输入用户名、密码（root、root），点击Logon，进入管理界面。

4.单击Status→Devices，进入到Bse Rck Sreen页面。

5.这个页面可以直接点击每个模块查看运行状态和详细信息。

风扇运行状态盘柜使用情况磁盘详细信息6.单击Status→RAID Group List，查看已经建立的RAID组。

7.单击RAID号可以查看这个RAID组使用盘柜的那几个磁盘8.单击Status→Volume List查看在存储上已经建立的卷。

二．卷的创建一旦Volume创建完成，存储即自动开始做Volume级别的format，但是一个普通的Open Volume或者一个Thin Provisioning Volume，除非完成Volume到主机的mapping，否则主机仍然无法看到这个Volume，下面我简单介绍一下Volume创建流程。

1.在管理界面单击Configuration→RAID Management→Create RAID Group2.输入Group Name，选择RAID Level，选择使用那个CPU，单击Set。

3.选择这个RAID Group要使用的磁盘，单击Set。

4.这时候系统要求你确认是否执行这个操作，检查无误后单击OK，开始format5.format完以后开始创建Volume。

6.选择你要在那个RAID Group上创建Volume。

7.在创建界面输入卷名，卷大小，单击Add。

8．选择刚创建的卷，单击Set。

8.检查无误单击OK。

9.Volume到主机的mapping。

单击进入Mapping页面，选择port。

10．输入open#（输入的应该和前面所创建Volume的open#一样），单击Set。

10.检查无误单击OK。

11.LUN成功创建。

1部件名称和功能车身电脑1.门闩无意中锁打开显示器。

当您打开液晶显示器，删除锁定滑动到右侧。

2.液晶显示这台计算机屏幕显示。

该模型是配备触摸屏幕，触摸屏已被粘贴。

“硬件” - “在触摸”o液晶显示器的特点以下是LCD的特性。

这些都不是有瑕疵，请注意。

▪液晶显示技术，使我们非常准确，而不是光点在屏幕上的一些不，有可能点燃所有的点。

▪液晶显示器已经在这台电脑上使用，制造过程，产品的不同颜色可能会为每个。

底纹的颜色可能会出现一些其它温度。

▪后像可以继续使用相同的长远的眼光。

后像会消失，一段时间后。

为了防止这种行为，关闭显示器或使用省电功能，我们建议使用屏幕保护程序。

▪这种状况可能会出现轻微的显着点和不平衡的。

3.佩恩（触摸屏型号）存储一直与触摸笔。

“硬件” - “在触摸”4.LCD状态显示显示计算机的状态这一点。

名称“零件” - “关于LCD状态显示”5.安全按钮附加应用“安全按钮”或“一触式按键设置”可用于安装（→“软件”- “软件目录”）。

附加应用程序通过设置密码“安全按钮”，用户认证可以做到的。

陪同的应用，“一触式按键配置通过使用功能，您可以调用，只需按下一个按钮，您的电脑”。

“安全” - “按钮”安全6.电源按钮打开控制台或个人电脑，待机（挂起）/恢复（恢复）是使按钮。

o请按从04秒电源按钮。

按住〇四秒电源按钮，计算机将关闭电源。

7.扬声器PC音频书籍印刷。

“函数” - “音量设置”o音量，请调整范围从扬声器Hizumanai声音设置和声音。

造成损坏扬声器。

8.键盘键入字符可以号令到PC。

“硬件” - “在键盘上”9.无线交换机（无线局域网模式只）无线局域网通信ON和OFF。

医院和飞机，在那里，请在设备限制使用其他电子开关为OFF。

o对于无线局域网，“Kasutamumeidoopushon”手册中请。

10. 平特操纵鼠标指针。

“硬件” - “为指针。

”体表电脑1.集成无线局域网天线（无线局域网模式只）内置的无线局域网天线。

Datasheet Fujitsu Software BS2000 OMNIS -MENU V3.5FUJITSU-PUBLIC Uncontrolled if printed /emeia/bs2000 1 of 3 © Fujitsu 2023Menu -driven operation of applicationsOMNIS-MENU offers a menu-driven interface with which the user can setup and cleardown connections to his applications without detailed knowledge of OMNIS. Switchingbetween applications is made easier by the use of keys.It is also possible to switch directly from OMNIS-MENU to the OMNIS command mode and to use other OMNIS functions.Datasheet Fujitsu Software BS2000 OMNIS -MENU V3.5FUJITSU-PUBLIC Uncontrolled if printed /emeia/bs2000 2 of 3 © Fujitsu 2023Functional description• Creating a user -specific terminalAn individual menu can be defined for each terminal user. This can be used to interwork with various partners.• The communication partners can be all application types supported by OMNIS (UTM, DCAM, TIAM, UCON, etc.). • P keys (or transaction codes) can be defined for dialog control and used to switch between applications.• A password must be defined for each user. This password can (or must) be altered. The modified password can also be used in UTM applications. The password is stored in encrypted form.• Single Sign On with KerberosSingle Sign On (SSO) on basis of the Kerberos authentication protocol is supported for user login to OMNIS -MENU. • Connection setup and cleardown from the required applications:Once the password has been checked the user’s individual working menu is displayed. Here the user can specify which applications he or she wishes to work with. A connection is then set up to the various applications and the relevant pre -dialog is performed.When logging off, the user can either retain all open connections or close them all. Connections can also be cleared down by means of a command. • Switchover functionWhen switching applications, OMNIS -MENU commences at the last screen output of the required application. This last output is displayed for the user, who can then enter data. • Help functionThe help function shows terminal users how to reach the applications specified for them.• Influencing control by application programsOMNIS -MENU is implemented as an OMNIS exit. In OMNIS users can define a number of exits and the order in which they are called. This OMNIS function allows users to exert an influence on the control of OMNIS -MENU. • Multiplex connections (OMNIS -UTM)OMNIS -MENU supports multiplex connections from OMNIS to openUTM via which more than one session can run concurrently. This considerably reduces the resourcerequirements when a large number of terminals are being used.Program description• Generation interfaceThe generation data for OMNIS -MENU are produced interactively using the OMNISMD utility routine. AllOMNIS -MENU configuration data may be modified while the system is running.• For each application, P keys can be defined that are available to the user after switching to this application. When the user logs in to or out from OMNIS -MENU, the P keys can be explicitly deleted in accordance with a global parameter. • Connection of terminalsOMNIS -MENU can be utilized by any number of data display terminals simultaneously. After connecting to OMNIS -MENU, users are shown a menu in which they must enter their name and password. After these entries have been checked users can select the applications they wish to work with.A generation parameter lets you specify whether a user can log in to OMNIS -MENU without restriction, or a user can log in only once. • ControlOMNIS -MENU is implemented as an OMNIS exit. All control functions (e.g. connection setup, monitoring of connections, transfer of messages to the application or terminal) are performed by the OMNIS base system.A K key can be globally defined (in conjunction with a P key) for switching to the OMNIS command mode. • Data protectionFull data protection is ensured. None of the terminals using OMNIS -MENU at the same time can access data associated with another terminal.Users can only work with applications specified for them at generation time. The applications’ data protection functions (e.g. key / lock concept in openUTM) are retained.When defining a password, one of four levels of complexity can be set, together with a minimum length and the period between changes, thereby taking account of increased data protection requirements.When the maximum number of unsuccessful login attempts specified at generation is exceeded, the terminal is locked. If there is no activity at the terminal within the time period defined at generation (either globally or on auser -/menu -specific basis), the connection to the terminal is cleared down (the partner connection can optionally be retained).• User interfaceAll masks are available in both English and German. An attractive web interface is available using "WebTransactions for OSD".TopicsDatasheet Fujitsu Software BS2000 OMNIS -MENU V3.5FUJITSU-PUBLIC Uncontrolled if printed /emeia/bs20003 of 3 © Fujitsu 2023Technical detailsTechnical requirements HardwareFujitsu Server BS2000 SE Serie Technical requirements SoftwareFujitsu Software BS2000 OS DX V1.0 or OSD/XC V11.0BFujitsu Software BS2000 OMNIS V8.5 Fujitsu Software BS2000 FHS V8.3 Optional:- Fujitsu Software BS2000 openUTM - Fujitsu Software BS2000 SECOS- 'kerberos -able' terminal emulation, e.g. MT9750Requirements for the userKnowledge of BS2000Operating modeDialog User interface English / GermanInstallation InstallationBy the customer according to the User Guide and Release NoticeDocumentationon the manual server. TrainingSee course offer (German)Conditionswith the conditions for the use of software products.Ordering and delivery information The software product can be obtained from your local Fujitsu regional office.ContactFujitsuBS2000 ServicesEmail: **************************Website: /emeia/bs2000 2023-07-13 EM EN © Fujitsu 2023. All rights reserved. Fujitsu and Fujitsu logo are trademarks of FujitsuLimited registered in many jurisdictions worldwide. Other product, service and company names mentioned herein may be trademarks of Fujitsu or other companies. Thisdocument is current as of the initial date of publication and subject to be changed by Fujitsu without notice. This material is provided for information purposes only and Fujitsu assumes no liability related to its use.。

FUJITSU Component Wireless ModulesBluetooth ¬ Version 5.0 Sensor Embedded Beacon FWM8BLZ07AOverviewA Bluetooth Version 5.0 sensor embedded beacon. Integration of 6 different sensors for IoT applications make multiple sensing capabilities to many different types of combination of the requirement.Suitable for a variety of applications, such as monitoring work environments, machine operating conditions, and cargo transportation conditions.FWM8BLZ07ARoHS compliantNotes:*1: Fujitsu Component unique data transmission profile, equipped in the beacon as standard*2: Sensor Value Characteristic is a function set in ‘Characteristic’, GATT specification of Bluetooth Smart, to have central equipment read. Sensor Value Characteristic is a unique Fujitsu Component name.*3: At 5 seconds sense interval and advertise interval.*4: At 5 seconds sense intervals and 1 second connection interval. *5:At 5 seconds sense interval.■Selection of 3 types of sensor data reporting• Via advertise packet - Beacon outputs sensor data by using auto broadcasat function • Via Fujitsu Components Data Communication (FDC) (*1) Beacon outputs sensor data in preset intervals • Using Sensor Value Characteristic (*2)Data is stored in sensor module and central equipment accesses the module to read data ■Integrates 6 different sensors for IoT applications, enabling the use of multiple sensors in different combinations. ■OTA configuration modeIn Over-The-Air (OTA) config mode the beacon unit settings and data can be re-configured by connecting to the central device ■LED status indicatorThe Beacon status can be displayed on the LED indicator■Long operation life with coin cell batteryThe Beacon is able to operate for more than 6 months at advertise packet output (*3), 3 months atFDC output (*4), 6 months at Sensor Value Characteristic output (*5).Sense interval 990 ms (changeable between 200 to 60,000 ms)Temperature -30°C to +60°CHumidity20% to 80%, accuracy ±3.0%Barometric pressure 300 hPa to 1,000 hPa, accuracy ±1.0 hPa Illuminance 0 LX to 10,000 LX 3-axis acceleration ±16G, accuracy ±3.0%Sound level0 dB SPL to 90 dB SPL■ Sensor specificationsItem SpecificationsPart number FWM8BLZ07A (xxxxxx: suffix to specify each customer’s settings)Type Sensor embedded beacon AntennaEmbedded (pattern antenna)Bluetooth technology Bluetooth core specification Version 5.0 (LE single mode)Transmit power -16, -12, -8, -4, 0, +4 dBm (changeable by command)ICNordic Semiconductor nRF52832Power supplyCoin cell lithium battery CR2450 (not included)Operating temperature / humidity -300C to +600C, 20 to 80% RHDimensions / Weight 40 x 31 x 12mm / Approx. 10g (without battery)Certifications Bluetooth Qualification (QDID), Radio Act (Japan), FCC, ISED, CE OtherBattery voltaqe notification function Secure advertise function (*6)Notes: *6: Encryption of advertise data is not available by the secure advertise function.■ Battery specificationsNote: Use of coin type lithium battery CR2450Please use the battery meets Figure 1 (minus electrode height min. 0.9mm, diameter max. 23 mm) to keep enough clearance between beacon holder and battery.Unit: mmMax. φ23M i n . 0.9Figure 1■ Dimensions■ SpecificationsContact CopyrightAll trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Copyright ©2020 Fujitsu Components America, Inc. All rights reserved. Revised February 18, 2020.JapanFUJITSU COMPONENT LIMITED Shinagawa Seaside Park Tower 12-4, Higashi-shinagawa 4-chome,Tokyo 140 0002, JapanTel: (81-3) 3450-1682Fax: (81-3) 3474-2385Email:***************** Web: /jp/group/fcl/en/North and South AmericaFUJITSU COMPONENTS AMERICA, INC.1230 E. Arques Ave., M/S 160 Sunnyvale, CA 94085 U.S.A.Tel: (1-408) 745-4900Fax: (1-408) 745-4970Email:*********************.com Web: /components/EuropeFUJITSU COMPONENTS EUROPE B.V.Diamantlaan 252132 WV Hoofddorp NetherlandsTel: (31-23) 5560910Fax: (31-23) 5560950Email:*****************.comWeb: /components/Asia PacificFUJITSU COMPONENTS ASIA, Ltd.102E Pasir Panjang Road#01-01 Citilink Warehouse Complex, Singapore 118529Tel: (65) 6375-8560 / Fax: (65) 6273-3021Email:***************.com/sg/products/devices/components/ChinaFUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD.Unit 4306, InterContinental Center100 Yu Tong Road, Shanghai 200070, China Tel: (86 21) 3253 0998 /Fax: (86 21) 3253 0997Email:***************.com/cn/products/devices/ components/Hong KongFUJITSU COMPONENTS HONG KONG Co., Ltd.Room 06, 28/F, Greenfield Tower, Concordia Plaza, No.1 Science Museum Road, Tsim Sha Tsui East, Kowloon, Hong Kong Tel: (852) 2881 8495 Fax: (852) 2894 9512Email:***************.com/sg/products/devices/components/KoreaFUJITSU COMPONENTS KOREA, LTD.Alpha Tower #403, 645 Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 13524 Korea Tel: (82 31) 708-7108Fax: (82 31) 709-7108Email:***************.com /sg/products/devices/components/Note: The Bluetooth ¬ word mark and logos are registered trademarks owened by Bluetooth SIG, Inc. and any use of such marks by Fujitsu Component is under license. Other trademarks and trade names are those of their respective oweners.。