智能视频监控系统SmartPSS使用说明书1.10.0

PSS监控软件使⽤说明书Professional Surveillance Software User’s Manual Version 4.0.0Table of Contents1OVERVIEW AND ENVIRONMENT (7)1.1Overview (7)1.2Environment (7)2INSTALLATION AND UPGRADE (8)2.1Installation (8)2.2Un-installallation (11)2.2.1Windows Menu (11)2.2.2Start Menu (12)2.2.3Resource CD (12)2.3Upgrade (12)2.3.1Software of the same version (12)2.3.2Software of different version (14)3INTERFACE (15)3.1Login Interface (15)3.2Initialization Interface (15)3.3Main Interface (16)3.4Interface Button (18)3.5Video Control Zone (18)3.6Screen Display Mode (19)3.7.1Task (19)3.7.2Alarm (19)3.7.3Playback (20)3.7.4E-map (22)3.7.5Configuration (23)3.7.5.1Password Modification (23)3.7.5.2Option (23)3.8Right Tool Bar (25)3.8.1Device List (26)3.8.2PTZ Direction Control (26)3.8.3PTZ Advanced (27)3.8.4Tool (29)3.8.4.1Begin/Stop record plan (29)3.8.4.2NVD Control (29)3.8.4.3Health Report (31)3.8.4.4Color (32)3.8.4.5Volume (32)3.8.5Setting Manage (32)3.8.5.1Scheme and Task (Task and Project) (32) 3.8.5.2Record Plan Configuration (35)3.8.5.3Alarm Manage (37)3.8.5.4E-map (40)3.8.5.5Decode Card Configuration (44)3.8.5.6User Management (45)3.8.5.7Device Manager (46)3.8.5.8NVD Manage (48)3.9Device Health Status (48)3.10Full Menu (50)3.10.1Modify Password (50)3.10.2Device (50)3.10.3Alarm (50)3.10.4Record Manage (51)3.10.5Scheme Task (51)3.10.6E-map (51)3.10.7Configuration (52)3.10.8Log out (52)3.10.9Exit (52)3.11.1Modify Password (53)3.11.2Alarm (53)3.11.3E-map View (53)3.11.4Health Report (53)3.11.5Color Default Setup (53)3.11.6Scheme Task (53)3.11.7Begin/Stop Record Plan (54)3.11.8Close Alarm Sound (54)3.11.9Log out (54)3.11.10Exit (54)4OPERATION INSTRUCTION (55)4.1Monitor Operation (55)4.2Monitor Task and Monitor Project (56)4.3PTZ Control (56)4.4Playback (56)4.4.1Device Record Playback (56)4.4.2Local Record Playback (57)4.4.3Download (57)4.4.4Record Play Control (57)4.4.5Others (57)4.5Snapshot and Manual Record (57)4.6E-map (57)4.7Log out (58)5PERIPHERAL DEVICE OPERATION (59)5.1Decode Card (59)5.2.1Menu (59)5.2.2NVD Control Principle (59)5.2.3Audio talk (61)WelcomeThank you for using our Professional Surveillance Software (PSS)!This user’s manual is designed to be a reference tool for operation of your system. Here you can find detailed operation information about PSS.1Overview and Environment1.1OverviewPSS is an abbreviation for Professional Surveillance Software.It is software to manage small quantity security surveillance devices. It releases with the device and does not support the products from other manufacturers.It can view several camera channels from various devices, and it can view the recorded video files from various devices. PSS can support multiple scheduled arms to realize auto PC guard. PSS supports e-map; you can clearly view all device locations.It can create individual configuration files for each user, which allows you maintain your own habit and style.Please note, it can run only once in one PC.1.2Environment●OS: Windows2000 / XP /2003/Vista.●CPU: 2.4GHz or higher.●Display card: Independent car and support directX 8.0c or higher.●Memory: 1GB or higher for XP OS.●Displayer: 1024*768 or higher.2Installation and Upgrade2.1InstallationPlease check the installation CD and make sure it includes the following files:setup.exe、Pro Surveillance System.ms；Double click the setup.exe to begin installation. See Figure 2-1.Figure 2-1Click next button to go to installation interface. See Figure 2-2.Figure 2-2Click next button, you can see an interface is shown as in Figure 2-3. Please input user name and organization name.Figure 2-3Click next button, you can see an interface is shown as below. Please select installation folder. Default folder is C:\Program Files\Pro Surveillance System\. See Figure 2-4.Figure 2-4Click next button, you can see there is an interface asking you to confirm the installation. See Figure 2-5.Figure 2-5Click next button, system begins installation. The interface is shown as in Figure 2-6.Figure 2-6During the installation process, you can click cancel button to exit.After installation, you can see an interface is shown as below. See Figure 2-7.Figure 2-7Click close button, you can complete the installation.2.2Un-installallationThere are two ways for you to remove the PSS.2.2.1 Windows MenuFrom the control panel to the add/remove program, you can see an interface is shown as in Figure 2-8.Figure 2-8Click remove button, you can see a dialogue box is shown as in Figure 2-9.Figure 2-9Click Yes button to remove PSS.2.2.2 Start MenuFrom Start menu-> All programs->PSS, select PSS uninstall item.System pops up the following dialogue box. See Figure 2-10. Please click yes to remove PSS.Figure 2-102.2.3 Resource CDYou can click the PSSSetup.ms in the installation CD, system pops up the following dialogue box. Please select remove PSS item to delete it. See Figure 2-11.Figure 2-112.3Upgrade2.3.1 Software of the same versionIf there is PSS software of the same version in the PC, you can see a dialogue box is shown as in Figure 2-12. Please click repair PSS setup to update the PSS.Figure 2-12During the repair process, the interface is shown as in Figure 2-13.Figure 2-13During the process, you can click cancel button to exit.After installation, you can see an interface is shown as below. See Figure 2-14.Figure 2-14Click close button, you can complete the installation.2.3.2 Software of different versionIf your PC has installed different version, please uninstall the PSS first and then install the latestversion. For detailed installation steps, please refer to chapter 2.1 install.3InterfaceDouble click PSS icon, you can go to the login interface.3.1Login InterfaceLogin interface is shown as in Figure 3-1.●User name: Input the user account●Password: Please input corresponding password to log in.●OK: Click this button, system can verify the account and then enter the software maininterface.●Cancel: Click this button to exit login interface.Note:●If it is your first time to run the PSS program, default user name is admin. Admin is a superadministrator and can not be removed. It can add, modify or delete other user.●For security reason, please modify your password after first log in.●You can memory your password, so that when you can log in the next time, you do not needto input user name and password. Please note this function is for your convenient only. Do not enable this function in public PC.Figure 3-13.2Initialization InterfaceClick OK button, system begins verifying user name and password and then go to the initialization interface. See Figure 3-2. Please note it may take a little bit longer to initialize decode card, please be patient.If it is your first time to use PSS, please go to chapter 3.7.5.2 Option to implement setup.Figure 3-23.3 Main InterfaceIn the main interface, there are real-time monitor interface and other operation and function menu. See Figure 3-3.Figure 3-3●Section 1: Current display window. It is circled by a green boundary. For video controlinformation, please refer to chapter 3.5 Video control zone.●Section 2: Right tool bar. Here you can view the five buttons: Device list (chapter 3.8.1).PTZdirection (Chapter 3.8.2), PTZ advanced (chapter 3.8.3), Tool (chapter 3.8.4), SettingManage (chapter 3.8.5).●Section 3: There are four buttons. Close/Minimize/Switch/Full menu. Forclose/Minimize/Switch button information, please refer to chapter 3.4.Click full menu button;you can view a menu shown as in Figure 3-4. For detail full menu information, please refer to chapter 3.10.Figure 3-4●Section 4: Screen display mode. Please refer to chapter 3.6 for detailed information.●Section 5: Function buttons. Here you can view the following buttons: Task (chapter 3.7.1),Alarm (chapter 3.7.2), Playback (chapter 3.7.3), E-map (chapter 3.7.4), and Configuration (chapter 3.7.5).●Section 6: Device health status. Please refer to chapter 3.9 for detailed information.When PSS is running, you can also see there is a littlie icon on your right tray menu. See Figure 3-5.Figure 3-5Right click mouse, you can see an interface is shown as in Figure 3-6.Please go to chapter 3.11 for detail information.Figure 3-63.4Interface Button3.5Video Control ZoneOn the video upper right, there are six icons. See Figure 3-7.Figure 3-73.6 Screen Display ModeScreen display mode interface is shown as in Figure 3-8.Figure 3-8From the left to the right, there are video quality, real-time/fluent button, full-screen button and 1-36 screen modes.Note:In full-screen mode or the window is maximized, sometimes you may notice the height and width of small window can adjust according to the displayer.3.7 Function ButtonFunction button is show as in Figure 3-9.It consists of the five buttons: Task/Alarm/Playback/E-map/Config.Figure 3-93.7.1 TaskClick Task button, the interface is shown as below See Figure 3-10.Here you can enable/disable the task or project item.Pause/restore button: Once you enabled one task/project, system display pause button. Circle means current task is in progress.Figure 3-103.7.2 AlarmAlarm manage interface is shown as in Figure 3-11.。

网络视频监控系统SmartPSS使用说明书V2.00.0前言概述本文档详细描述了SmartPSS 的配置和使用。

符号约定在本文中可能出现下列标志，它们所代表的含义如下： 图标说明表示有高度潜在危险，如果不能避免，会导致人员伤亡或严重伤害。

表示有中度或低度潜在危险，等伤害。

表示有潜在风险，设备性能降低或不可预知的结果。

防静电防静电标识，用于表示静电敏感的设备。

电击防护电击防护标识，用于表示高压危险。

激光辐射激光辐射标识，用于表示强激光辐射。

表示能帮助您解决某个问题或节省您的时间。

表示是正文的附加信息，是对正文的强调和补充。

目录前言 (I)1 SmartPSS简介 (1)1.1 SmartPSS概述 (1)1.2 SmartPSS软件界面 (1)2 登录SmartPSS (3)3 设备管理 (5)3.1自动搜索添加设备 (5)3.2手动添加设备 (6)3.3批量导入添加设备 (7)3.4修改IP地址 (8)4 预览 (10)4.1实时预览 (10)4.2电子地图 (15)4.2.1 新建地图 (15)4.2.2 新建热区 (17)4.3配置智能通道 (18)4.4配置主从跟踪（鱼球联动） (20)4.5配置主从跟踪（枪球联动） (22)4.6云台设置 (24)4.6.1 设置预置点 (26)4.6.2 设置巡航 (27)4.6.3 设置线性扫描 (28)4.6.4 设置巡迹 (28)4.7鱼眼视图模式 (28)4.8通过NKB1000键盘操作设备预览 (29)5 轮巡计划 (31)6 回放 (35)6.1录像回放 (35)6.2回放设备录像 (37)6.3导出设备录像 (38)6.4回放设备图片 (40)6.5导出设备图片 (41)6.6回放本地录像 (42)6.7导出本地录像 (42)6.8回放本地图片 (44)7 日志查询 (46)7.1查询客户端日志 (46)7.2查询设备日志 (46)8 系统配置 (48)9 用户配置 (51)9.1角色管理 (51)9.2用户管理 (52)10 设备配置 (55)11 事件设置 (57)11.1事件类型 (57)11.2事件报警联动配置 (59)11.2.1 配置联动通知 (59)11.2.2 配置联动视频 (60)11.2.3 配置联动报警输出 (61)11.2.4 设置事件报警布防时间 (61)11.3查看事件 (62)12 电视墙 (64)12.1电视墙 (64)12.2配置电视墙并上墙 (66)12.3配置预案轮巡上墙 (68)12.4配置回放上墙 (70)12.5通过NKB1000键盘操作电视墙 (70)13 人数统计 (72)14 热度图 (75)15 PC-NVR (76)15.1磁盘管理 (76)15.2通道管理 (77)15.3配置录像计划 (77)15.4查看版本信息 (78)15.5修改端口 (79)15.6修改密码 (80)1SmartPSS简介1.1SmartPSS概述SmartPSS是一款用于管理小批量安全防护监控设备的管理软件。

网络视频监控系统SmartPSS 使用说明书一、打开软件，弹出对话框，用户名和密码输入admin（用户名和密码相同），可以记住密码，方便下次登录。

二、打开主页，有基本功能，扩展功能和配置管理功能。

双击就打开该功能并加入到菜单栏中了，方便下次使用该功能；如果不想使用了也可以删掉，点击该功能右上角的叉以了。

序号参数说明1 菜单显示主页的图标和已被打开的功能图标。

单击“添加”，可以将需要打开的功能添加到菜单上。

2 基本功能包括预览、回放、报警管理和日志查询功能。

3 扩展功能包括电视墙、电子地图和设备显示控制功能。

4 配置管理包括设备管理、设备配置、报警配置、轮巡计划、PC-NVR管理、电视墙配置、用户配置和系统配置。

5 SmartPSS基本信息显示当前时间、用户信息和登录SmartPSS的时间。

3. 设备管理您可以手动或自动添加设备手动添加设备的步骤如下：步骤1 单击“配置管理”区域框中的。

系统显示“设备管理”界面。

步骤2 单击“设备管理”界面最下面的“添加”。

系统弹出“手动添加”对话框，如图3-8所示。

图 3-8 手动添加参数说明设备名称设备的名称。

分组名称需要先在“预览”界面新增分组。

- 17 - 参数说明设备类型选择设备的类型。

IP/域名设备的IP地址或域名。

端口设备的端口号。

采用默认值37777。

用户名登录该设备的用户名。

密码登录该设备的密码。

参数说明设备序列号设备的序列号。

用户不可设置。

视频输入数该设备的视频输入数量。

视频输出数该设备的视频输出数量。

报警输入数该设备的报警输入数量。

报警输出数该设备的报警输出数量。

步骤4 单击“添加”。

您也可以单击“保存并添加”，连续添加下个设备。

已添加的设备显示在设备列表中，如图3-10所示。

图 3-10已添加的设备您可以在设备列表中，修改、删除、登录、登出设备。

您也可以将设备批量导入和批量导出。

4.远程设备您可以通过自动搜索或者手动添加远程设备，界面如图3-13所示。

智能安防监控系统使用指南第一章概述 (3)1.1 智能安防监控系统简介 (3)1.2 系统组成与功能 (3)1.2.1 系统组成 (3)1.2.2 系统功能 (4)第二章系统安装与部署 (4)2.1 硬件设备安装 (4)2.1.1 设备清单 (4)2.1.2 安装步骤 (5)2.2 软件系统部署 (5)2.2.1 软件清单 (5)2.2.2 部署步骤 (5)2.3 网络配置与调试 (5)2.3.1 网络配置 (5)2.3.2 调试 (6)第三章设备配置与管理 (6)3.1 摄像机配置 (6)3.1.1 摄像机选型 (6)3.1.2 摄像机安装 (6)3.1.3 摄像机参数配置 (6)3.2 存储设备管理 (7)3.2.1 存储设备选型 (7)3.2.2 存储设备安装 (7)3.2.3 存储设备管理 (7)3.3 辅助设备配置 (7)3.3.1 网络设备配置 (7)3.3.2 电源设备配置 (8)3.3.3 防护设备配置 (8)第四章视频监控与存储 (8)4.1 视频监控设置 (8)4.1.1 监控区域划分 (8)4.1.2 监控设备选择 (8)4.1.3 网络配置 (8)4.1.4 参数设置 (8)4.2 视频存储策略 (9)4.2.1 存储设备选择 (9)4.2.2 存储容量规划 (9)4.2.3 存储方式选择 (9)4.2.4 存储周期设置 (9)4.3 视频回放与检索 (9)4.3.1 视频回放 (9)4.3.3 录像剪辑与 (9)4.3.4 录像管理 (9)第五章报警系统与联动 (9)5.1 报警设置与阈值 (9)5.1.1 报警类型 (9)5.1.2 报警阈值 (10)5.1.3 报警设置操作 (10)5.2 联动设备配置 (10)5.2.1 联动设备类型 (10)5.2.2 联动设备配置操作 (10)5.3 报警记录查询 (10)5.3.1 查询条件 (11)5.3.2 查询操作 (11)第六章系统维护与升级 (11)6.1 系统维护方法 (11)6.1.1 定期检查硬件设备 (11)6.1.2 软件更新与升级 (11)6.1.3 数据备份 (11)6.1.4 系统安全防护 (11)6.2 系统升级流程 (11)6.2.1 升级前准备 (11)6.2.2 升级过程 (12)6.2.3 升级后验证 (12)6.3 常见问题处理 (12)6.3.1 摄像头故障 (12)6.3.2 录像机故障 (12)6.3.3 存储设备故障 (12)6.3.4 网络故障 (12)6.3.5 软件故障 (13)第七章用户权限管理 (13)7.1 用户账号管理 (13)7.1.1 账号创建 (13)7.1.2 账号修改 (13)7.1.3 账号删除 (13)7.2 权限分配策略 (13)7.2.1 权限级别 (13)7.2.2 权限分配原则 (14)7.2.3 权限调整 (14)7.3 用户操作日志 (14)第八章安全防范与应急处理 (14)8.1 安全防范措施 (14)8.1.1 系统安全防护 (14)8.1.2 数据安全保护 (14)8.2 应急处理流程 (15)8.2.1 事件报告 (15)8.2.2 事件评估 (15)8.2.3 应急处置 (15)8.2.4 后期恢复 (15)8.3 应急预案制定 (15)8.3.1 预案编制 (15)8.3.2 预案演练 (16)8.3.3 预案修订 (16)第九章数据分析与应用 (16)9.1 数据统计与分析 (16)9.1.1 数据收集与清洗 (16)9.1.2 数据统计分析方法 (16)9.1.3 数据分析应用 (16)9.2 数据可视化展示 (16)9.2.1 可视化工具选择 (16)9.2.2 可视化图表类型 (17)9.2.3 可视化展示原则 (17)9.3 数据应用案例 (17)9.3.1 案例一：安防事件统计分析 (17)9.3.2 案例二：人员流动分析 (17)9.3.3 案例三：风险预警与应对 (17)9.3.4 案例四：智能巡检 (17)第十章系统验收与评估 (17)10.1 系统验收标准 (17)10.2 验收流程与方法 (18)10.3 系统功能评估 (18)第一章概述1.1 智能安防监控系统简介智能安防监控系统是一种集成了现代信息技术、网络通信技术、图像处理技术等多种技术手段的综合性安全防范系统。