tecsis压力表P1454,P1453

Pressure gaugePressure gaugeProduct range overview2d Internet: /catalogue/...Subject to change – 2022/0632022/06 – Subject to changed Internet: /catalogue/...Pressure gauges MA-ENDatasheetFunction-Q-Temperature range–20 ... +60°C1)If the temperature of the medium used is below 0°C, ensure the operating medium is dry.Pressure gauges MA-ENDatasheet4d Internet: /catalogue/...Subject to change – 2022/06Pressure gauges MA-EN Datasheet5 2022/06 – Subject to change d Internet: /catalogue/...6d Internet: /catalogue/...Subject to change – 2022/06Pressure gauges MA-RG, with red/green rangeDatasheetFunction-Q-Temperature range–20 ... +60°CThe adjustable red/green range pro-vides additional safety when monitor-ing compressed air.The coloured red and green segments show when the pressure isin the required pressure range.The different colours make it possible to see at aglance whether the pressure is in thepermitted tolerance range.1)If the temperature of the medium used is below 0°C, ensure the operating medium is dry.Pressure gauges MA-RG, with red/green range Datasheet7 2022/06 – Subject to change d Internet: /catalogue/...8d Internet: /catalogue/...Subject to change – 2022/06Pressure gauge MADatasheetFunction-Q-Temperature range–20 ... +60°C1)If the temperature of the medium used is below 0°C, ensure the operating medium is dry.2)With display unit [MPa].Pressure gauge MA Datasheet9 2022/06 – Subject to change d Internet: /catalogue/...Pressure gauge MADatasheet10d Internet: /catalogue/...Subject to change – 2022/06Pressure gauge MA DatasheetPressure gauge MA DatasheetPrecision pressure gauge MAPDatasheetFunction-Q-Temperature range–20 ... +60°C1)If the temperature of the medium used is below 0°C, ensure the operating medium is dry.Pressure gauge MA-QSDatasheetFunction-Q-Temperature range–20 ... +60°CFlanged pressure gauge FMA-EN DatasheetFunction-Q-Temperature range–20 ... +60°C1) If the temperature of the medium used is below 0°C, ensure the operating medium is dry.Flanged pressure gauge FMA-EN DatasheetFlanged pressure gauge FMADatasheetFunction-Q-Temperature range–20 ... +60°CFlanged precision pressure gauge FMAP DatasheetFunction-Q-Temperature range–20 ... +60°C1) If the temperature of the medium used is below 0°C, ensure the operating medium is dry.Flanged precision pressure gauge FMAP DatasheetPressure gauge PAGN-...-P10DatasheetFunction-Q-Temperature range–20 ... +60°C1)If the temperature of the medium used is below 0°C, ensure the operating medium is dry.2)With display unit [MPa].Pressure gauge PAGN-...-P10 Datasheet21 2022/06 – Subject to change d Internet: /catalogue/...22d Internet: /catalogue/...Subject to change – 2022/06Pressure gauge PAGNDatasheetFunction-Q-Temperature range–5 ... +50°C232022/06 – Subject to changed Internet: /catalogue/...Pressure gauge PAGNDatasheetFunction-Q-Temperature range–20 ... +60°C1)If the temperature of the medium used is below 0°C, ensure the operating medium is dry.Pressure gauge PAGNDatasheet24d Internet: /catalogue/...Subject to change – 2022/06252022/06 – Subject to changed Internet: /catalogue/...Precision pressure gauge PAGNDatasheetFunction-Q-Temperature range–20 ... +60°C1)If the temperature of the medium used is below 0°C, ensure the operating medium is dry.Precision pressure gauge PAGNDatasheet26d Internet: /catalogue/...Subject to change – 2022/06272022/06 – Subject to changed Internet: /catalogue/...Flanged pressure gauge PAGN-PDatasheetFunction-Q-Temperature range–20 ... +60°C1)If the temperature of the medium used is below 0°C, ensure the operating medium is dry.Flanged pressure gauge PAGN-PDatasheet28d Internet: /catalogue/...Subject to change – 2022/06Festo - Your Partner in AutomationConnect with us/socialmedia 1Festo Inc.2Festo Pneumatic 3Festo Corporation 4Regional Service Center 5300 Explorer DriveMississauga, ON L4W 5G4CanadaAv. Ceylán 3,Col. Tequesquináhuac 54020 Tlalnepantla, Estado de México1377 Motor Parkway Suite 310Islandia, NY 117497777 Columbia Road Mason, OH 45040Festo Customer Interaction CenterTel:187****3786Fax:187****3786Email:*****************************Multinational Contact Center 01 800 337 8669***********************Festo Customer Interaction Center180****3786180****3786*****************************S u b j e c t t o c h a n g e。

压力表的分类及技术参数来源压力表按用途可分以下几种：一、Y系列压力表1、Y系列一般压力表、压力真空表、真空表该系列压力表广泛应用于管道及容器中测量无爆炸危险、无结晶体、不凝固及对合金不起腐蚀作用的液体、气体、蒸汽等介质的压力大小。

具有体积小，性能安全可靠，显示清晰等优点。

●选型表名称型号测量范围(MPa) 精度压力表Y-40 Y-60 1.5；2.5Y-100 1.0；1.5Y-150 1.0；1.5Y-200 1.0；1.5真空表Z-40 -0.1～0；1.5；2.5Z-60 1.5；2.5Z-100 1.0；1.5Z-150 1.0；1.5Z-200 1.0；1.5压力真空表YZ-40 -0.1～0.06；-0.1～0.15；-0.1～0.3；-0.1～0.5；-0.1～0.9；-0.1～1.5；-0.1～2.4；1.5；2.5YZ-60 1.5；2.5YZ-100 1.0；1.5YZ-150 1.0；1.5YZ-200 1.0；1.5使用环境条件温度-40～70℃；相对温度≤85%2、Y系列不锈钢压力表该系列压力表的零件采用耐腐蚀的不锈钢及耐腐蚀的合金材料制成，使仪表具有良好的耐腐蚀性能，可广泛应用于石油、化工、冶金、矿山、机械、电力及食品行业。

直接测量不结晶体，但有腐蚀性的气体、液体的压力。

●技术参数公称直径：Ф100结构形式：径向直接安装式接头螺纹：M20×1.5精度等级：1.5；2.5测量量范围：-0.1～0MPa；-0.1～0.15至-0.1～2.4MPa；0～0.1至0～60MPa耐振等级：YBF为V.H.3；YBFN为V.H.4材料：0Cr18Ni9Ti、1Cr18Ni9Ti、316L●规格示意名称型号公称直径测量范围(MPa) 接头螺纹精度等级耐振等级不锈钢压力表YBF 100 -0.1～0；-0.1～0.15；-0.1～2.4；0～0.1；0～60；M20×1.5 1.5；2.5 V.H.3不锈钢耐振压力表YBFN 100 -0.1～0；-0.1～0.15；-0.1～2.4；0～0.1；0～60；M20×1.5 1.5；2.5 V.H.4二、YTN系列耐震压力表耐震压力表适用于环境剧烈振动场所，可耐受介质的脉动，冲击及突然卸荷，仪表指示稳定清晰。

多种类型小外径压力表系列More kinds small diameter pressure gauge 索引页Index: PA.06.1索引页Index: PA.06.2索引页Index: PA.06.3索引页Index: PA.06.5索引页Index: PA.06.6索引页Index: PA.06.7索引页Index: PA.06.8索引页Index: PA.06.9索引页Index: PA.06.10索引页Index: PA.06.11索引页Index: PA.06.12索引页Index: PA.06.13索引页Index: PA.06.14索引页Index: PA.06.15钢内机塑料玻璃罩压紧式压力表YTF-040. ZO. 505Stainless Steel Internals Plastic Window Glass Pushed in Pressure Gauge 几何尺寸 DIMENSIONS 单位Unit (mm)40轴向卡子安装一般压力表Y-040.ZK.204 40 Back clamp mounting General Service Pressure Gauge单位Unit (mm)43/53轴向安装充油耐震压力表YTN-043/053 43/53 Back mounting, Liquid filling & Vibration-proof pressure gauge YTFN-043/053产品特性：●径向结构、轴向、轴向卡子安装结构可选●不锈钢旋紧式罩壳设计●304钢外壳铜内机、钢内机可选●充液耐震，密闭干式可选● 2.5%精度等级●测量范围：铜内机：0.1MPa～25MPa钢内机：0.16MPa～25MPa●平板卡子安装可选CHARACTERISTICS●Bottom mounting, Back monting, Back clamp mounting available ●Stainless Steel, screw type●304 Stainless Steel case, brass internals or StainlessSteel internals available●Liquid filling, Vibration-proof,Obturation and dry type available●Accuracy 2.5%●RangeBrass internals: 0.1MPa～25MPaStainless Steel internals: 0.16MPa～25MPa●Plain board clamp mounting availableBack clamp mounting：几何尺寸 DIMENSIONS 单位Unit (mm)43/53轴向安装充油耐震压力表单位Unit ：mm 径向 Bottom mounting 轴向 Back mounting 轴向卡子 Back clamp mounting51罩壳压紧式普通压力表Y-050.20551 Push in type General Service Pressure Gauge 几何尺寸 DIMENSIONS 单位Unit (mm)仪表型号标示 Type code ：Y-050. ZO. 205 (Y-50 A18 )41/51充油耐震压力表YTN-041/051 41/51 Liquid filling, Vibration-proof pressure gauge YTFN-041/051几何尺寸 DIMENSIONS单位Unit：mm：Back mounting：耐热型产品特性：●径向或轴向接头两件式结构●旋压密封罩壳设计●304本色钢外壳铜内机、钢内机可选●充液耐震，密闭干式可选● 2.5%精度等级●测量范围：铜内机：0.1MPa～25MPa钢内机：0.16MPa～25MPaCHARACTERISTICS●Bottom mounting or Back mounting, two-piece type●Roll formed●304 original color case, brass and Stainless Steel case available●Liquid filling, Vibration-proof, Obturation and dry type available●Accuracy2.5%●RangeBrass internals: 0.1MPa～25MPaStainless Steel internals: 0.16MPa～25MPa40、50铁壳旋压密封式压力表Y-040.20340, 50 Iron case roll formed pressure gauge Y-050.203轴向安装、轴向卡子安装结构几何尺寸 DIMENSIONS 仪表型号标示Y-040. ZK. 203 (Y49-AZK)Y-050. ZK. 203 (Y512-AZK)单位Unit ：mm几何尺寸 DIMENSIONS 单位Unit (mm)G36\G46\44轴向有机玻璃罩壳旋紧式压力表G36/G46/G44 Back mounting, Screw type pressure gauge Stainless Steel internals Y-036. ZO. 204 (G36Z )Y-046. ZO. 204 (G46 Z)日本)304 original color, polishing case 50径向螺钉上紧式压力表Y-050. 20050 Bottom mounting, fixed with screw pressure gauge YTF-050. 200Y-050. AO. 200 (Y-50DK )Y-050. ZO. 200 (Y-50ZDK)φ50钢内机 Stainless Steel internals 仪表型号标示径向：YTF-050. AO. 200 (Y-50 AeroB- )轴向：YTF-050. ZO. 200 (Y-50Z AeroB- )几何尺寸 DIMENSIONS 单位Unit (mm)几何尺寸 DIMENSIONS 单位Unit (mm)40螺钉上紧式罩壳压力表Y-040.20040 Fixed with screw pressure gauge塑壳锅炉压力表YTY-40Plastic Case Boiler Pressure Gauge 几何尺寸 DIMENSIONS 单位Unit (mm)YTY-040. 00. 105(YTY-40Z 庆东)几何尺寸 DIMENSIONS 单位Unit (mm)Ф30轴向旋压密封式小不锈钢压力表YTF-030.ZO. 533Ф30 Back mounting Roll formed Stainless Steel Small Pressure Gauge几何尺寸 DIMENSIONS 单位Unit (mm)40小外径不锈钢密闭型压力表YTFS-040 40 Small Stainless Steel Obturation type Pressure Gauge各种类型小外径压力表各种类型小外径压力表如何选型 HOW TO ORDER－。

tecsis GmbHDE 247 e Carl-Legien Str. 40D-63073 Offenbach / Main Sales NationalSales International p. 1 / 4Tel.: +49 69 5806-0 Fax: +49 69 5806-170 Fax: +49 69 5806-177| Force | Pressure | Temperature | SwitchStandard system contact pressure gaugesfor the chemical industry, with or without dampeningwith magnetic snap-action contacts or inductive alarm contactsNominal sizes ND 100 Connection position bottom, radialor back, eccentricDescriptionContact pressure gauges with electrical alarm contacts are suitable for controlling or regulating process sequences. The contacts open or close electrical circuits in relation to the position of the pointer on the pressure gauge.Our contact pressure gauges with the Bourdon tube system are used at process pressures of approximately 1 bar and upwards. The materials used make the gauges suitable for chemically aggressive gases or liquids, although these may not be too viscous or be susceptible to crystallization. The inexpensive tried and tested Bourdon tube system coupled with a modern modular principle provides a very reliable yet inexpensive contact pressure gauge.Gauges with liquid filling are damped if pressure pulses or mechanical vibrations arise. This extends the service life and the gauge display remains largely vibration free. The location of the pressure connection at the bottom or back allows different methods of installation.Electrical alarm contacts are used as magnetic snap-action contacts, especially in harsh industrial conditions. The high contact pressure and the choice of different electrical contact materials enable high currents to be switched reliably. If the electrical switching capacities of the alarm contacts are exceeded or not reached (see DE 1231), a relay is to be used to provide an appropriate current rating (see DD 1230).Inductive alarm contacts operate without physical contact and thus have no unfavourable effects on the pressure measuring system while having an unlimited service life. A control unit is always needed to operate these contacts. Contact pressure gauges with inductive alarm contacts can be used in potentially explosive atmospheres, provided that the appropriate regulations are complied with.These pressure gauges are especially suited for monitoring Gas density inclosed SF 6 gas tanks. Because of the hermetically sealed, they are applicable for outdoor installation. One or max. 3 snap-action contacts are non-adjustable and secured by fabrication.The used measurement system were tested with Helium leakage rate <1x10-8 mbar l s -1. Special featureso Modular construction system ensures high reliability and long service life o Liquid dampening provides vibration-free displayo Chemical resistant due to stainless steel designo Case, stainless steel 1.4301o Stainless steel measuring system 1.4571 o Overload capacity up to 2.5 x o Protection to IP 65 o Accuracy class 1.0o Up to four alarm contacts possible o Suitable for programmable controller (inductiv E-contacts)o For SF 6 gas applications snap-actions max. 3x contact, alternatively 2x contact with galvanic isolation non adjustableMeasuring ranges0 ... 1 bar to 0 ... 1600 barApplicationsProcess engineering, water treatment, Mechanical engineering and plant constructionModels: P2351, P2353, P2361, P2363P2371, P2373, P2381, P2383 苏州迅鹏进口仪表事业部苏州迅鹏进口仪表事业部Technical Data* Number of contactsMeasuring range Magnetic snap-action contact Inductive contact up to 1 bar 2 21.6 bar 2 3above 4 bar 4 3See data sheet - DE 1231 for electrical dataSee data sheet - DE 1230 for electrical dataDE 247 ep. 2 / 4DE 247 ep. 3 / 4DimensionsConnection position bottom, radial Model : P2351 , P2353 , P2361 , P2363Connection position back, eccentric Model : P2371 , P2373 , P2381 , P2383SW22ModelP2351, P2353, P2371, P2373 P2361, P2363, P2381, P2383Dimension: " A "108 mmDE 247 ep. 4 / 4DimensionsConnection position bottom, radial Model : P2351 , P2353 , P2361 , P2363.Front / rear mounting flangeConnection position back, eccentric Model : P2371 , P2373 , P2381 , P2383. Front / rear mounting flangeModelP2351, P2353, P2371, P2373,P2361, P2363, P2381, P2383Dimension " A "108 mmModifications reservedCable junction box, back:。

数显电接点压力表产品概述沈阳海泰仪表工业有限公司，式推出其性价比更高的数字压力表产品，该产品的量程从15Psi 至5000Psi 不等，可直接用于腐蚀及非腐蚀性介质的表压、绝压压力的测量，并具有显示单位变换、上下限设定、开关量输出、模拟信号输出、零点校正等功能，并保持高于0.25%的精度标准。

应用领域外型结构·冷冻系统·气体压缩机 ·燃油管道·压力机械·各种动力泵·液体测量·供水 ·机械自动化 ·过程控制 ·农业应用 ·喷灌设备、设施 ·气体储备产品特征 ⏹ 高精度：优于0.25% ⏹ 结构坚固，不锈钢隔离封装，激光焊接采用专用芯片进行线性调整及温度补偿 ⏹ 可按用户标准生产 ⏹ 结构小巧，性价比高 ⏹ 220v 供电，2A 继电器输出 或用户自定义输入输出方式。

标准量程规格 ⏹ 15, 50, 75, 100, 200, 300, 500, 750, 1000, 500, 2000, 3000 and 5000 Psi举例：－－产品系列压力范围压力接口电器连接（1-40mpa）Hex Port S-StandardA 22mm 4/1-18 NPT MD-Mini Din with 4-20mA outputB 22mm 8/1-27 NPT MDPR-Mini Din with 4-20mA outputwith programmable set points 使用说明：一．按键功能描述：►：检查设置压力下限值Unit/Set ：改变显示单位(psi, bar or Kg cm2)Δ：检查设置压力上限值复位的操作方法：同时按下►Δ并持续3秒。

二．如何设置压力的上下限：1.按下Unit/Set3秒钟后，系统变成压力设置模式。

（在屏幕左边显示▲ +，并且第一位数字闪动，此时允许你设置压力的上限值）。

远传压力表基本描述YTZ电阻远传压力表1、适用于测量对钢及铜合金不起腐蚀作用的液体、蒸汽和气体等介质的压力。

因为在电阻远传压力表内部设置一滑线电阻式发送器,故可把被测值以电量传至远离测量的二次仪表上,以实现集中检测和远距离控制。

此外，本压力表并能就地指示压力，以便于现场工作检查。

2、主要技术指标滑线电阻式发送器接线图YTZ电阻远传压力表使用环境条件:-40~60℃，相对湿度不大于85%，且振动和被测（控）介质的急剧脉动应对仪表正常工作无明显影响。

温度影响:使用温度偏离205℃时，其温度附加误差不大于0.4%/10℃精确度等级:1.6级发送器起始电阻值:30~20Ω发送器满度电阻值:340~400Ω发送器接线端外加电压不大于6V电阻远传压力表使用环境条件:-40~60℃，相对湿度不大于85%，且振动和被测（控）介质的急剧脉动应对仪表正常工作无明显影响。

温度影响:使用温度偏离205℃时，其温度附加误差不大于0.4%/10℃技术指标产品名称远传压力表产品型号YTZ-150公称直径（mm）150精度等级1.6测量范围（MPa）0~0.1~60-0.1~0~2.4连接螺纹M20×1.5电位器起始电阻（Ω）8~16电位器满度电阻（Ω）330~390工作电压（V）≤6测量范围Mpa0~0.16 ，0~0.25 ，0~0.4 ，0~0.60~1.0 ，0~1.6 ，0~2.5 ，0~40~6 ，0~10 ，0~16 ，0~25 ，0~40-0.1~0.06 ，-0.1~0.15 ，-0.1~0.3 ，-0.1~0.5 -0.1~0.9 ，-0.1~1.5 ，-0.1~2.4工作条件（1）环境温度:-40~60℃（2）工作压力:静负荷:用至测量上限值的3/4交变负荷:用至测量上限值的2/3短时压力:用至测量上限值（3）相对温度:85%结构原理本电阻远传压力表由一个弹簧管压力表和一个滑线电阻式发送器等所组成.电阻远传压力表机械部分的作用与一般弹簧管压力表相同。

∙【水压表第1名】YN60 0~1MPa外壳不锈钢耐震充油抗震压力表水压气压表上海天川售出：101件价格：30.00元∙【水压表第2名】Y60ZT 0~1.6MPa 轴向带边压力表气压表水压表售出：101件价格：18.00元∙【水压表第3名】正品上海自动化仪表四厂Y-60压力表/气压表/ 水压表正品的力量售出：104件价格：25.00元∙您是否在找:∙天王表∙情侣表∙机械表∙机械表全自动男∙氨气减压器∙氨气压力表∙电子表∙精密压力表∙表男∙陶瓷表∙吊带白色∙魔兽争霸∙联通3g手机卡流量∙夏运动套装女∙沙发组合客厅∙小童装男童秋装∙佳能60d 18-135套机∙木屐凉鞋水压表旗舰店,怎么读水压表,水压表的使用方法∙【伊莱科】压力表径向Y-60 全规格水压表油压表气压表(红旗)12.80售出：18件∙消火栓试验装置试压表压力表消防水压测试表消防栓水压测试179.00售出：7件∙Y100ZT 0~1.6MPa面板式轴向带边压力表水压表气压表上海天川32.00售出：7件∙进口款式全不锈钢压力表YN-63 0-0.6MPA/0-6KG，水压表，气压表60.00售出：7件∙YEATHEI 压力表40MM 0-10KG/140PSI 气压表，水压表，（ZG1/8牙）12.00售出：7件∙五金驰名商标1.6MPA压力表2分压力表水压表减压阀用压力表15.00售出：7件∙直径40MM 0-15BAR/200PSI轴向耐震压力表，水压表，油压表，30.00售出：7件∙40MM面板式压力表0-10BAR/0-150PSI, 水压表，气压表，1分牙18.00售出：7件∙上海仪川仪表Y100 0-1MPA压力表气压表水压表18.00售出：7件∙★冲钻特价★0-0.6mpa 大范围压力表/ 水压表/油压表/气压表15.00售出：7件不锈钢压力表/防腐压力表/ 水压表/气压表/液压表Y-100BF85.00售出：6件压力表液压表油压表水压表Y-60 0-10Mpa 高品质径向压力表10.00售出：6件∙普通压力表气压表水压表压力表Y-60 0-0.6 - 0-60 系列齐全12.00售出：6件∙压力表机油压力表油压表气压表水压表油压表WT-102 2M35.00售出：6件∙压力表/ 水压表/气压表/液压表Y100低压表（科达）15.00售出：6件∙冲4钻特价压力表轴向带变YN60ZT0-6MPA耐震轴向带边气压表水压表45.00售出：6件∙上海自动化仪表四厂Y100 压力表/气压表/ 水压表白云牌4MPA以下36.00售出：6件开泉自来水压力测试带油压力表16mpa 净水器纯水机水压测试28.00售出：6件∙一般压力表Y-250 气压表水压表规格齐全非标订制90.00售出：6件∙一般压力表/ 水压表/气压表/液压表Y-100 全规格非标订做15.00售出：6件∙冲皇冠上海品牌Y100 （0-1MPA）普通压力表水压表16.00售出：6件Y60 0-0.4MPA 表盘60MM压力表普通压力表水压表上海压力表7.00售出：6件∙不锈钢耐震压力表/YN-60/0~30Mpa/油封压力表水压表30Mpa 1.6Mpa30.00售出：6件∙Y60 0-0.25MPA 表盘60MM压力表普通压力表水压表低压表7.00售出：6件∙YN100 0-1MPa耐震抗震充油外壳不锈钢压力表气压表水压表上海天川60.00售出：6件天川仪表Y100 0-1MPA 25MPA 40MPA 60MPA 压力表真空表水压表18.00售出：6件∙Y60轴向普通弹簧管压力表水压表气压表0-10MPa 特价15.00售出：6件∙正品红旗牌压力表气压表水压表真空表Y-150全规格33.00售出：6件∙Y100 0-25MPA 表盘100MM压力表普通压力表水压表气压表上海压力表15.00售出：6件∙冲4钻压力表气压液压油压水压表压力表电接点Yxn100压力开关290.00售出：6件∙上海天川仪表Y60 0-0.1MPA 0.25 40MPA压力表气压表水压表12.00售出：6件∙净水器纯水机配件安装工具/自来水检测水压表/压力表/ 水压检测仪25.00售出：6件∙普通压力表Y60 0-2.5MPa 气压表水压表上海仪川12.00售出：6件∙Y60 0-0.16MPA 表盘60MM压力表普通压力表水压表低压表7.00售出：6件∙普通压力表Y-60 0-0.6MPa 水压表气压表上海仪川12.00售出：6件1个回答水压表?答:水压表在工业过程控制与技术测量过程中，由于机械式水压表的弹性敏感元件具有很高的机械强度以及生产方便等特性，使得机械式水压表得到越来越广泛的应用。