2020-11-20海大集团：关于控股股东权益变动达1%的公告002311

ISO certi ed in Akashi Works and Nishi-Kobe Works.Small-to-medium robotsup to 80kg payloadRS series BXP seriesBX/BT seriesMedical & pharmaceutical robots Wafer transfer robotsNTS series TTS seriesPicking robotsYF seriesLarge robots up to 300kg payloadZX seriesMS series MC seriesBA series RA seriesArc welding robotsExplosion-proofpainting robotsK series BU seriesSealing robotsCP series RD seriesPalletizing robotsDual-armCollaborative robotsduAro seriesExtra large robotsup to 1,500kg payloadM series02 01RS007NRS030NRS050NRS080NRS013N0403BX100NBT165L / BT200LweldingseriesSlim design and small footprint forLarge robots up to 300kg payload0605ZX165UseriesSpot weldingHigher speed thanks to new F series controller.Wide range of applications for everySuitable for harsh environment thanksto wrist motors located at the shoulder.BXP110LLarge robots up to 300kg payloadLarge robots up to 300kg payloadBXP series BXP110LBXP135XBXP210L0807duAro seriesCollaborative robotsMG15HLseriesMax. payload of 1,500kg suitable forheavy workpieces, e.g. cast iron.Dynamic, yet accurate operations dueto high positioning repeatability.Slim body without a counter weight,allowing for a wide motion range and duAro1duAro2up to 1,500kg payloadSpace-saving without safety With its two arms, duAro can perform as ef cient tasks as Easy programming using a Collaborative robots＊2: Max. working range varies depending on the load mass and load torque1009KJ264BU015XWide range of lineup for painting small parts to largeHollow wrist to prevent painting defects due to paint mist.Packaged painting systems for an easy and quick installationReduced interferences thanks to the symmetric armPainting of wider range because of long reach andJT6RollJT6RollJT5Roll JT5Bend JT4Roll3RKF193 / KF194 / KF263 /KF264 / KJ125 / KJ155 /KJ194 / KJ244 / KJ264 /KJ3141211CP700LRA Arc weldingBA006NRA010NRD080N1413YF003N MC004NMS005N NTS20TTS20YF TTS 1615By making use of 3D models of the facilities and workpieces,robot programming and simulations can easily be performed onthe PC.Off-line veri cation in advance reduces the risk of problems atthe time of start up of robot systems.It can recognize randomly stacked irregular objects.In a palletizing and de-palletizing process, objects canbe identi ed automatically without prior registration ofobjects' data.Putting a limit on the robot motion range and monitoring the speed,force and collision assures operators' safety.Limits on the motion range provides the robot system with saferoperation and space-saving.Compliant with ISO 10218-1, 13849-1 (PLd/Category 3) andIEC61508 (SIL2).Off-line programming toolKawasaki's original AS language is a versatile, multi-functional robot programming language thatsupports monitor instructions, programming commands and functions.It enables programming with high-level operation and sequence controls. The AS language is equippedstandard with all the Kawasaki robots2D Vision system3D vision systemRobot monitoring function for safetyDetection of the present object position in synchronizingwith a conveyor.Compensation of the gripping position by xed or handcameras.Automated creation and veri cationof the robot operation program.Read-in of theworkpieceLimiting the motion range accordingto operator's working area.Simultaneous simulation of multiplerobots is possible.Overall support of the robot system over thelife cycle time is provided for safety on theproduction.All-time monitoring and collection ofo p e r a t i o n d a t a e na b l e s p r e v e n t i v emaintenance. K-COMMIT for life cyclesupport is targeted to achieve no down-time.Full-service service packagewith state-of-art technologybased on the robot condition.It can discern randomly stacked objects.High-loadrobotLow-loadrobotCondition BasedMaintenanceAS languageOptionOptionOptionOptionOptionIt is possible to recognize both regular objects (e.g. PCB holes) and irregular objects (e.g. food materials).Without using a complicated indexing device, object's precise position can accurately be identi ed.F controllersE controllersDegrees of protectionThe E0x controllers are extremely compact.They are designed for the universal use of different powersupply voltages with optional transformer units.Explosion-proof E controllersExplosion-proof type controllers are used with paintingrobots.The explosion-proof teach pendant can also be used insidethe painting booth.Dimensions and weight have been reduced from itsprevious E-controller.This universal controller has common speci cations thatcan be used globally.(An optional transformer unit is necessary in the regionwhere the power supply and safety standard differ.)Universal controller has common speci cations to be usedworldwide.Drastic downsizing has achieved very compact dimensionsand light weight (8.3kg).It is easy for a person to carry the controller.E01/02/03/04F60F01/02/03/042518 17。

MAKING MODERN LIVING POSSIBLEQuick Reference Parts ManualVariable Displacement Pump Series 20, 20-27 seriesAX00000099 en-US | 520L0910 • Rev 0203 • August23AX00000099 en-US | 520L0910• Rev 0203 • August Contents Exploded view drawing (20 thru 23 series) (4)Service parts (20 thru 23 series) (5)Exploded view drawing (24 thru 27 series) (6)Service parts (24 thru 27 series) (7)SPV2/033 (20 series) (8)SPV2/052 (21 series) (8)SPV2/070 (22 series) (8)SPV2/089 (23 series) (8)SPV2/119 (24 series) (9)SPV2/166 (25 series) (9)SPV2/227 (26 series) (9)SPV2/334 (27 series) (9)Service parts Drive shafts4AX00000099 en-US | 520L0910 • Rev 0203 • August5AX00000099 en-US | 520L0910• Rev 0203 • August Item # Discription SPV2/033 (20) SPV2/052 (21) SPV2/070 (22) SPV2/089 (23) Overhaul seal kit 9510224 9510227 9510230 9510233 1 Shaft seal kit 050088 050088 050088 0503022 O-ring 056788 (9004104-2340) 056788 (9004104-2340) 056788 (9004104-2340) 071860 (9004104-2380)3 O-ring 008821 (9004104-1290) 008821 (9004104-1290) 008821 (9004104-1290) 008979 (9004104-1360)4 Seal kit 9510022 9510022 9510022 95100215 Front bearing kit 050575 (9510251) 050575 (9510251) 050625 (9510256) 050658 (9510259)6 Swashplate, 18° 002725 9210279 9220570 95107617 Cylinder block kit 510149 593251 596890 92309738 Piston kit, set of 3 711291 (not a kit of 3) 9510408-0010 9510408-0001 9510408-0002 8 Remanufactured 711291 R9510408-0010 R9510408-0001 R9510408-00029 Slipper retainer 9200158 003210 (9210292) 003707 (9220628) 004176 (9230234) 10 Slipper ret. guide J9200124 003160 (9210219) 9220500 9230158 11 Pilot ring 002709 010678 013862 00432512 Bearing plate 002733 585885 585893 56167013 Valve plate, cw 002881 003368 003889 004333Valve plate, ccw 002899 003376 003897 00434114 Rear bearing kit 050567 (9510250) 050591 (9510253) 050617 (9510255) 050641 (9510258) 15 End cap gasket 9200088 9210204 9220425 9231081 16 Chg pump gasket, gear 9801235 9801235 9801235 9801235 gerotor with IPOR n/a 9803241* 9803241* 9803241* gerotor without IPOR n/a 9803252* 9803252* 9803252*17 O-ring 000869 (9004100-1390) 000869 (9004100-1390) 512007 (9004100-1430) 512007 (9004100-1430) 18 O-ring 000851 (9004100-1360) 000851 (9004100-1360) 512008 (9004100-1410) 512008 (9004100-1410) 19 Thrust plate 010520 003228 (9210293) 003699 (9220626) 00418420 Trunnion bearing kit 050583 (9510252) 050609 (9510254) 050633 (9510257) 050666 (9510639) prior to 88-01-xxxxx 951026021 O-ring 000927 (9004100-2260) 000935 (9004100-2280) 000943 (9004100-2300) 000950 (9004100-2320) 22 Trunnion shim kit 9510422-0001 9510422-0002 9510422-0003 9510422-0004 23 Servo piston link 589317 589317 589325 59467187-13 thru 97-23 n/a 9210620 9221367 9230787 24 Retaining ring 9006300-0050 9006300-0050 9006300-0062 9006300-006225 Pin 013904 (9004830-0001) 013904 (9004830-0001) 013680 (9004830-0002) 013680 (9004830-0002) 26 Check valve assembly 075366 (9800648) 075366 (9800648) 075366 (9800648) 075366 (9800648) 27 O-ring 056770 (9004101-0150) 056770 (9004101-0150) 056770 (9004101-0150) 056770 (9004101-0150) 28 Servo sleeve assembly 9200582 9200582 9510207 9510207 29 Servo sleeve assembly 9200583 9200583 9510350 9510350 30 Stroke limiter kit 9200515 9200515 9221078 9221078 31 Torx screw 9007276-0011 9007276-0011 9007276-0011 9007276-0011 32 Servo retainer 9200087 9200087 9220419 9220419 33 Control gasket 9803340 9803340 9803340 980334034 O-ring 001032 (9004101-0140) 001032 (9004101-0140) 001032 (9004101-0140) 001032 (9004101-0140) 35 Front cover gasket 9200076 9210201 9221528 9230124 36 Cylinder block 049155 049163 014878 01491036 Remanufactured n/a R9210576 R9221102 R9230651 37 Cylinder block assy n/a n/a 11077853 520087/P * Indicated special charge pump gaskets (item # 16) are not included in the overhaul seal kit.Service parts6AX00000099 en-US | 520L0910 • Rev 0203 • August7AX00000099 en-US | 520L0910• Rev 0203 • August Service parts Item # Discription SPV2/119 (24) SPV2/166 (25) SPV2/227 (26) SPV2/334 (27) Overhaul seal kit 9510236 9510239 9510316 9510242 1 Shaft seal kit 050302 050302 058537 0505342 O-ring 000984 (9004100-2380) 000984 (9004100-2380) 049718 (9004100-2420) 000992 (9004100-2430)3 O-ring 008979 (9004104-1360) 008979 (9004104-1360) 680892 (9004104-1440) 012187 (9004104-1490)4 Seal kit 9510021 9510021 n/a n/a5 Front bearing kit 050658 (9510259) 9510264 9510267 050732 (9510270)6 Swshplate, 18° 9240197 9250164 9260152 9270462 7 Cylinder block kit 9240641 634923 9260369 9270658 8 Piston kit, set of 3 9510408-0004 9510408-0005 9510408-0006 9510408-0009 8 Remanufactured R9510408-0004 R9510408-0005 R9510408-0006 R9510408-0009 9 Slipper retainer 9240125 9250170 9260072 9270486 10 Slipper ret. guide 9240097 005090 046243 00558711 Pilot ring 702381 634907 634915 63489912 Bearing plate 9240560 585901 9260321 58592713 Valve plate, cw 004895 651810 9260355 62232413 Valve plate, ccw 004903 628933 9260356 65196814 Rear bearing kit 050674 (9510261) 050690 (9510263) 055434 (9510266) 050724 (9510386) 15 End cap gasket 9240549 9250587 9260144 9270710 16 Chg pump gasket, gear 9801604 9801604 9801604 9801604 gerotor with IPOR 9803241* n/a n/a n/agerotor without IPOR 9803252* n/a n/a n/a17 O-ring 000901 (9004100-1510) 000901 (9004100-1510) 000919 (9004100-1560) 000919 (9004100-1560) 18 O-ring 000893 (9004100-1500) 000893 (9004100-1500) 000992 (9004100-2430) 000992 (9004100-2430) 19 Thrust plate 011015 (9240124) 005181 (9250171) 049635 (9260073) 004184 (9230235) 20 Trunnion bearing kit 050682 (9510262) 050609 (9510254) 050633 (9510257) 050666 (9510639) 21 O-ring 000968 (9004100-2340) (9004100-2280) (9004100-2300) 000950 (9004100-2320) 22 Trunnion shim kit 9510422-0005 9510422-0006 9510422-0007 9510422-0008 23 Servo piston link 9240584 9250617 9260252 9270653 24 Retaining ring 9006300-0075 9006300-0075 9006300-0087 9006300-008725 Pin 9004830-0008 9004830-0008 013680 (9004830-0002) 013680 (9004830-0002) 26 Check valve assembly 075366 (9800648) 543553 (9802028) 543553 (9802028) 543553 (9802028) 20 gpm 527887 n/a n/a n/a27 O-ring 056770 (9004101-0150) 063230 (9004101-0270) 063230 (9004101-0270) 063230 (9004101-0270) 20 gpm valve 012575 (9004105-1170) n/a n/a n/a28 Servo sleeve assembly 9510208 9510208 n/a n/a29 Servo sleeve assembly 9510351 9510351 9510331 9510331 30 Stroke limiter kit 9240326 9240326 9260185 9260185 31 Torx screw 9007276-0011 9007276-0011 9007276-0011 9007276-0011 32 Servo retainer 9240076 9240076 9270178 9270178 33 Control gasket 9803340 9803340 9803340 980334034 O-ring 001032 (9004101-0140) 001032 (9004101-0140) 001032 (9004101-0140) 001032 (9004101-0140) 35 Front cover gasket 9240070 9250158 9260145 9270175 17 Cylinder block 049171 073585 073619 07118317 Remanufactured R9240394 R9250470 R9260231 R9270495 * Indicated special charge pump gaskets (item # 16) are not included in the overhaul seal kit.8AX00000099 en-US | 520L0910 • Rev 0203 • AugustPart Number Description010827 14 tooth spline, gear charge pump707828 20 tooth spline, gear charge pump046557 21 tooth spline, M10 threaded hole, gear charge pump708073 Straight key, 3/8-24 UNF-2B threaded hole, gear charge pump 9003261-3132 Key, 5/16 x 5/16 x 2 1/2080465 14 tooth spline, gear charge pump9210663 14 tooth spline, gerotor charge pump018812 21 tooth spline, gear charge pump9210673 21 tooth spline, gerotor charge pump9210428 Tapered, gear charge pump9003310-3724 Key5000606 (9700169) Slotted nut9210538 Straight key, gear charge pump9003261-3132 Key, 5/16 x5/16 x 2 1/2144402 14 tooth spline, gear charge pump9221447 14 tooth spline, gerotor charge pump079913 (9220515) 19 tooth spline, gear charge pump9220527 20 tooth spline, 3/8-24 UNF-2B threaded hole, gear charge pump 9221475 20 tooth spline, 3/8-24 UNF-2B threaded hole, gerotor charge pump 048504 (9220417) 21 tooth spline, gear charge pump9221441 21 tooth spline, gerotor charge pump046581 (9220884) Tapered, gear charge pump9003310-3724 Key5000606 (9700169) Slotted nut039644 (9221065) Straight key, 3/8-24 UNF-2B threaded hole, gear charge pump 9003261-3132 Key, 5/16 x5/16 x 2 1/29230476 14 tooth spline, gear charge pump9230951 14 tooth spline, gerotor charge pump014985 (9230325) 21 tooth spline, gear charge pump9230968 21 tooth spline, gerotor charge pump9230173 23 tooth spline, 3/8-24 UNF-2B threaded hole, gear charge pump 9231014 23 tooth spline, 3/8-24 UNF-2B threaded hole, gerotor charge pump 9230147 27 tooth spline, 3/8-24 UNF-2B threaded hole, gear charge pump 9230445 Tapered, 1.5” nominal shaft dia., gear charge pump9003310-3724 Key5000606 (9700169) Slotted nut9230989 Tapered, 1.375” nominal shaft dia., gerotor charge pump 9003310-3724 Key5000606 (9700169) Slotted nut9230626 Straight key, 3/8-24 UNF-2B threaded hole, gear charge pump 9003261-3132 Key, 3/8 x 3/8 x 2 1/2SPV2/033 (20 series)SPV2/052 (21 series)SPV2/089 (23 series)SPV2/070 (22 series)9AX00000099 en-US | 520L0910• Rev 0203 • August Drive shaft Part Number Description 07930113 tooth spline, M14 x 2-6H tapped hole, gear charge pump 924068513 tooth spline, gerotor charge pump 04684727 tooth spline, M14 x 2-6H tapped hole, gear charge pump 9240231Tapered, gear charge pump 9003326-0005Key 9700189Slotted nut 9240713Tapered, gerotor charge pump 9003326-0005Key 9700189Slotted nut 039982Straight key, 1/2-20 UNF-2B threaded hole, gear charge pump 9003261-3732Key, 3/8 x 3/8 x 2 1/2054940 13 tooth spline, gear charge pump047894 27 tooth spline with M14 x 2-6H tapped hole, gear charge pump9250409 Straight key, 1/2-20 UNF-2B threaded hole, gear charge pump9003261-3732 Key, 3/8 x 3/8 x 2 1/29260140 13 tooth spline, gear charge pump045930 27 tooth spline, M14 x 2-6H tapped hole, gear charge pump9260176 Straight key, 1/2-20 UNF-2B threaded hole, gear charge pump9003261-5040 Key, 1/2 x 1/2 x 3 1/2077727 15 tooth spline, gear charge pump9270741 40 tooth spline, M16 tapped hole, gear charge pump561530 Straight key, 1/2-20 UNF-2B threaded hole, gear charge pump 9003261-6244 Key, 5/8 x 5/8 x 4SPV2/166 (25 series)SPV2/119 (24 series)SPV2/334 (27 series)SPV2/227 (26 series)AX00000099 en-US | 520L0910 • Rev 0203 • August1011AX00000099 en-US | 520L0910• Rev 0203 • August NotesDanfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and electronic components. We specialize in providing state-of-the-art technology and solutions that excel in the harsh operating conditions of the mobile off-highway market. Building on our extensive applications expertise, we work closely with our customers to ensure exceptional performance for a broad range of off-highway vehicles. We help OEMs around the world speed up system development, reduce costs and bring vehicles to market faster. Danfoss – Your Strongest Partner in Mobile Hydraulics.Go to for further product information.Wherever off-highway vehicles are at work, so is Danfoss. We offer expert worldwide support for our customers, ensuring the best possible solutions for outstanding performance. And with an extensive network of Global Service Partners, we also provide comprehensive global service for all of our components. Please contact the Danfoss Power Solution representative nearest you.Products we offer:y Bent Axis Motorsy Closed Circuit Axial Piston Pumps and Motorsy Displaysy Electrohydraulic Power Steeringy Electrohydraulicsy Hydraulic Power Steeringy Integrated Systemsy Joysticks and Control Handlesy Microcontrollers and Softwarey Open Circuit Axial Piston Pumpsy Orbital Motorsy PLUS+1® GUIDEy Proportional Valvesy Sensorsy Steeringy Transit Mixer Drives Comatrol Schwarzmüller-Inverter www.schwarzmueller- Turolla Valmova Hydro-Gear Daikin-Sauer-Danfoss Local address:Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.Danfoss Power Solutions 22F, Block C, Yishan Rd Shanghai 200233, China Phone: +86 21 3418 5200Danfoss Power Solutions GmbH & Co. OHG Krokamp 35D-24539 Neumünster, Germany Phone: +49 4321 871 0Danfoss Power Solutions ApS Nordborgvej 81DK-6430 Nordborg, Denmark Phone: +45 7488 2222Danfoss Power Solutions US Company 2800 East 13th Street Ames, IA 50010, USA Phone: +1 515 239 6000AX00000099 en-US | 520L0910 • Rev 0203 • August © Danfoss A/S, 2015。

c1720w与c17200区别
C1720W和C17200都是微型电脑的一种，它们的技术特点众多，主要有存储容量、价格、外观、处理器、显卡等。

这两款微型电脑的差异在以下方面表现明显：
首先，C1720W的存储容量比C17200更大，它拥有更大的主存储器，以处理大量数据和应用程序。

其次，C1720W的价格比C17200高，它们相差300至400元。

此外，C1720W的外观也比C17200精美，它采用简洁的外观设计，且内部采用全铝合金材料制作，使其具有更好的耐用性。

另外，C1720W的处理器可以运行更复杂的任务，并且可以支持多种任务同时运行。

此外，C1720W还具有更强的显卡性能，可以支持更流畅的多媒体播放，更好地改善用户体验。

总之，C1720W和C17200的区别主要表现在存储容量、价格、外观、处理器、显卡等方面。

C1720W的存储容量更大，价格也更高，外观更加精美，处理器能力更强，显卡性能也更好。

这些优势使C1720W 比C17200更受消费者青睐。

- 1 -。

COD7视角代码介绍COD7（Call of Duty: Black Ops）是一款由Treyarch开发并由Activision发行的第一人称射击游戏。

该游戏于2010年面世，是Call of Duty系列的第七部作品。

视角代码在游戏中起到了关键的作用，它决定了玩家在游戏中所处的视觉角度。

本文将深入探讨COD7视角代码及其在游戏中的应用。

COD7视角代码的分类在COD7中，视角代码分为以下几类： 1. 第一人称视角（First-person perspective） 2. 第三人称视角（Third-person perspective） 3. 瞄准视角（Aiming perspective）第一人称视角第一人称视角是COD7中最常见的视角，玩家将在游戏中扮演主角的角色，以主角的视角来进行游戏。

这种视角能够给玩家带来身临其境、沉浸感的游戏体验。

玩家能够直接看到主角手中的武器、打败敌人时的动作以及周围环境的细节。

第一人称视角能够增强玩家的代入感，使得玩家更容易融入到游戏世界中。

第三人称视角第三人称视角是指玩家能够看到主角的背影或者整个角色模型的视角。

相比于第一人称视角，第三人称视角能够给玩家提供更广阔的视野，玩家可以更好地观察主角周围的环境和敌人的位置。

此外，第三人称视角使得玩家能够更好地掌控角色的动作，更加容易完成一些需要精准操作的任务。

瞄准视角瞄准视角是COD7中用于瞄准敌人的一种特殊视角。

当玩家按下瞄准键时，游戏会切换到瞄准视角，并且将主角的视线对准准心。

瞄准视角能够提高玩家射击的精准度，使得玩家能够更好地击败敌人。

在这种视角下，玩家可以看到武器的准心，帮助玩家更好地控制射击的方向。

瞄准视角在COD7中起到了至关重要的作用，使玩家能够在极短的时间内做出准确的射击决策。

COD7视角代码的实现为了实现不同的视角效果，COD7视角代码采用了一系列的编程技巧和算法。

下面将介绍一些常用的实现视角效果的代码片段。

12378910目录欢迎您加入日益兴旺的新型INFINITI英菲尼迪车主的行列。

我们满怀信心地向您提供该新型INFINITI英菲尼迪汽车。

它是用最新技术并在严格的质量管理下制造的。

本使用说明手册是为您了解车辆的操作和保养而准备的，有了它，您可享受久驶不损之乐趣。

在使用本车之前，请通读本手册。

另附的《保修和保养手册》对车辆的保修进行了详细的说明。

INFINITI英菲尼迪经销店最了解您汽车的情况。

如果您需要什么服务或有任何问题，我们都会运用重要的安全信息安全注意事项！遵守下列重要的驾驶规则，可确保您和乘客旅途的安全！.切勿酒后或服药后驾驶。

.务必观察限速标志，切勿超速驾驶。

.务必使用安全带及恰当的儿童保护装置。

未满13岁的儿童应坐在后座。

.务必提醒乘客车辆安全装置的正确使用方法。

.务必查阅本使用说明手册以获取重要的安全信息。

本手册说明本手册包括了有关该车型所有选装件的资料。

因此您可能会发现其中有些资料并不适用于您的车辆。

本手册中的所有资料，包括规格和插图，在本手册出版时有效。

INFINITI英菲尼迪汽车公司保留在任何时候修改车辆的规格或设计的权利，恕不另行通知。

车辆的改装不应对该车辆进行改装。

改装可能会影响车辆的性能、安全性或耐久性，甚至可能会违反政府的法规。

另外，INFINITI英菲尼迪汽车公司提供的保修服务将不包括由于改装所引起的损坏或性能问题。

请先阅读—然后安全驾驶在驾驶车辆之前，请仔细阅读本用户手册。

这能确保您熟悉车辆的控制与保养要求，有助于您安全驾驶。

在本手册中，我们使用了符号伴随警告二字。

这表示有可能导致死亡或严重人身伤害的危险。

要避免或降低这种风险，必须认真遵守操作程序。

在本手册里还使用符号伴随注意二字来表示有可能引起轻微或中度人身伤害或车辆损害的危险。

要避免或降低这种风险，必须认真遵守操作程序。

SIC0697如果您看到此符号，它表示“请勿进行此操作”或“请勿让此情况发生”。

如果您在插图中看到与此类似的符号，它表示箭头指向车头。

附录9SAB WABCO公司SWKP AS20C型防滑器1．功能概述1.1概述现代车辆运行已充分认识到了当车辆加速或制动时轮轨粘着不足带来的问题。

当根据摩擦系数实施恒定制动时，轮对可能会开始滑动，因此会导致轮对的擦伤并增加制动距离。

微电子技术的发展和微机的应用已使防滑器，通过最大限度的利用粘着，大大加强制动系统的功能，另外，诊断技术的提高已使防滑器的功能扩宽，并能降低维修保养费用。

SWKP AS20C型防滑器系统能够最充分的利用粘着，从而获得理想的制动距离，并防止轮对抱死及损坏。

1.2. SWKP AS20C型防滑器的结构图一防滑器主机面板1.2.1 机械部分SWKP AS20C型防滑器主机装在一个结构紧凑的金属盒子里。

如图一所示。

具有良好的抗高频特性，抗冲击和振动特性。

主机和车体的连接通过主机下方的四个接头插接。

另外，还有一个通过RS232与计算机相连的接口，可以进行防滑器的保养、运用和诊断。

1.2.2 原理概述轴的转动速度可以在车速从2km/h至400km/h的范围内测出并进行分析。

测出的轴速与根据真正轴速计算出的速度判据进行比较。

两种速度的比较可以判断出轮对是否进入滑行状态。

轴速是通过安装在轴端的速度传感器和测速齿轮测出的。

放风阀与制动管相连，安装在车下靠近制动缸的位置。

放风阀控制制动缸内压力增减以确保获得最佳的制动力并产生最好的制动效果。

因此可避免滑行的产生。

放风阀内部采用24V电压，双极驱动电路。

每个正负极线都有自己的放大器，放大器由监控电路监视以保证安全性。

监控电路可以监视放大器的正确接通，如果误动作发生，则可以切断电路。

系统控制、数据收集和处理。

以及内部监控，所有功能都由微控制器进行，并每28ms数据可以更新。

因此可以保证速度在2～400km/h 下使用。

光导接头可以进一步的信号处理，数据分析处理，以增加使用的安全性。

继电器信号的输出可以加强数据处理，以获得除防滑器以外的门控速度信号。

簡介 ...........................................................................................................................................................1 關於本使用說明書................................................................................................................................ 1 資訊和使用須知 .................................................................................................................................... 2 相機組件................................................................................................................................................... 4 相機機身 ..................................................................................................................................................................... 4 螢幕 ................................................................................................................................................................................8 基本操作 ................................................................................................................................................. 10 A （拍攝模式）按鍵...................................................................................................................................10 c （重播）按鍵..............................................................................................................................................10 多重選擇器 ............................................................................................................................................................11 d 按鍵 .................................................................................................................................................................12 在不同的標籤之間切換 ...............................................................................................................................12 說明畫面 .................................................................................................................................................................. 13 關於快門釋放按鍵 ........................................................................................................................................... 13 安裝相機帶 ............................................................................................................................................................13

培训手册Wonderware ApplicationServer 3.1目录一、简介 (5)1.1 Wonderware系统平台 (5)Lab 1 创建Galaxy (6)1.2 ArchestrA IDE (9)1.3 系统对象 (17)1.4 建模及规划 (18)Galaxy项目开发流程 (18)Lab 2 搅拌器建模分辨 (19)二、平台应用结构 (22)2.1 模板 (22)Lab 3创建一个模板 (22)2.2 开发模板 (27)Lab 4创建部署模板 (27)2.3 运行环境 (35)Lab 5如何使用对象查看器 (35)2.4 连接现场数据 (41)Lab 6 连接现场数据 (41)三、平台应用对象 (49)3.1 模板与实例 (49)3.2 用户定义对象 (51)Lab 7 创建热交换器模板 (51)3.3 改变控制及衍生 (61)Lab 8 如何改变控制及衍生 (61)3.4 模拟型设备对象 (64)Lab 9 创建仪表模板 (64)3.5 离散型设备对象 (66)Lab 10 创建阀、泵、电机模板 (66)3.6 模板容器 (74)Lab 11创建Mixer (74)四、扩展对象 (91)4.1 UDAs (91)4.2 扩展属性 (91)Lab 12配置电机速度属性 (91)4.3 脚本简介 (96)Lab 13用脚本添加自动连接至DDE Suitelink Client (96)Lab 14用脚本配置自动注释 (99)五、报警和历史 (105)5.1 报警 (105)Lab 15报警配置 (105)5.2 历史 (117)Lab 16历史配置 (117)六、安全 (122)6.1 安全回顾 (122)Lab 17安全配置 (122)七、Galaxy 维护 (142)7.1 导出导入对象 (142)7.2 通过.csv文件配置实例 (143)7.3 系统管理控制（SMC） (144)7.4 网络账户功能 (145)八、数据采集产品 (145)8.1 IO Server (146)8.2 DA Server (147)8.3 DI Object (147)九、多节点开发 (148)9.1 应用系统冗余 (148)Lab 18 配置应用冗余 (148)9.2 数据采集冗余 (150)Lab 19 配置DI对象冗余 (150)9.3 多节点应用 (153)Lab 20 转换到网络开发环境 (153)一、简介1.1 Wonderware 系统平台系统架构节点 描述 安装组件Galaxy Repository GR 节点，一个Galaxy 就有一个GR 节点。

施2023-11-04CATALOGUE目录•工程监理概述•工程监理未履行职责的原因分析•工程监理未履行职责的整改措施•工程监理未履行职责的整改措施实施计划•工程监理未履行职责整改措施的预期效果•工程监理未履行职责整改措施的持续改进计划01工程监理概述工程监理是指具有相关资质的监理单位，受建设单位委托，依据国家有关工程建设的法律法规、技术标准和施工合同，对工程建设实施过程中的质量、进度、成本、安全等方面进行全面监督和管理的活动。

工程监理是一种专业的服务，其目的是保障工程建设项目的顺利实施，维护建设单位和施工单位的合法权益。

工程监理的定义工程监理的职责协助建设单位制定工程建设方案，参与工程设计、施工、验收等环节；对工程施工过程中的质量、进度、成本、安全等方面进行全面监督和管理；对工程验收进行监督，确保工程质量符合要求。

协调建设单位与施工单位之间的合作，解决工程建设过程中的问题；工程监理单位应履行以下职责工程监理在工程建设中具有非常重要的地位和作用。

通过履行职责，工程监理能够保障工程质量，确保工程安全可靠；优化工程施工进度，提高工程效率；降低工程成本，提高工程效益；加强工程管理，提高工程建设水平。

工程监理的重要性02工程监理未履行职责的原因分析监理单位内部管理机制不健全导致监理人员无法得到有效的管理和监督，从而影响其工作效率和质量。

领导层对监理工作的重视程度不够领导层对监理工作的重视程度不够，缺乏对监理工作的指导和支持，导致监理人员无法充分发挥作用。

监理单位管理不善部分监理人员缺乏必要的专业知识和技能，无法对工程进行全面有效的监督和管理。

监理人员专业知识和技能不足部分监理人员对工作不负责任，敷衍塞责，甚至存在违法违规行为。

监理人员工作态度不认真监理人员素质不高缺乏有效的监督机制缺乏有效的监督管理制度没有建立健全的监督管理制度，无法对监理人员的工作进行规范和约束。

缺乏有效的监督手段没有有效的监督手段，无法及时发现和纠正监理工作中的问题。

版权所有，不得翻印© 2008-2022 AURALIC LIMITED (AURALiC) and licensors.版权所有。

本出版物的任何部分，包括但不仅限于图片，文字，代码与交互功能，未经声韵音响或其授权人的书面许可，不得复制。

本手册仅作提供信息之用，而不应被视为一种承诺。

声韵音响有权对各种细节进行变更,不必另行通知。

声韵音响对可能出现在本手册中的错误不承担责任。

AURALiC, inspire the music, Lightning Streaming, Purer-Power, ORFEO 以及它们的图标是声韵音响的注册商标。

这些商标或商业外观不得以任何可能引起消费者混淆的方式，或任何贬低、诽谤声韵音响的方式用于与本网站以及声韵音响无关的任何产品或服务上。

本网站上的非声韵音响持有的商标，是其商标权利人所独有的财产，这些权利人可能与本网站有相应的关系，也可能没有关系，或由声韵音响所赞助。

未经声韵音响或相关商标所有人的书面许可，本网站上的任何内容都不应被解释为以默许或其他方式授予许可而使用本网站上出现的商标的权利。

目录符合标准说明 (4)关于保修 (5)包装清单 (5)放置和线缆连接方式 (6)放置 (6)检查您的交流电电压 (6)线缆连接方式 (7)前面板 (8)使用您的 ALTAIR G1.1 (9)启动和休眠 (9)欢迎界面 (10)主菜单 (11)正在播放 (12)列表 (13)输入 (13)系统 (14)流媒体播放器 (16)处理器 (17)音乐图书馆 (18)Lightning 网页控制界面 (21)为i OS 开发的L ightning DS (22)使用其他软件 (22)使用A LTAIR G1.1 作为U SB 解码器 (23)将 ALTAIR G1.1 作为流媒体播放器 (23)网络设置 (23)通过以太网连接到您的网络 (24)通过 Wi-Fi 连接到您的网络 (26)开始使用 Lightning DS 控制软件 (30)智能红外遥控 (32)维修服务 (33)规格 (35)AURALiC 产品登记表 (36)为了降低触电风险，请不要私自拆开产品外壳。

金龍lv1,2,3:3771,3772,3773
冰龍lv1,2,3:3761,3762,3763
雪龍lv1,2,3:3751,3752,3753
卡龍lv1,2,3:3741,3742,3743
紫龍lv1,2,3:3731,3732,3733
綠龍lv1,2,3:3721,3722,3723
真·女神白焰鞋子:2062
真·女神白焰火翼:2096
真·女神白焰火巾:2049
粉紅系列:
極限粉焰頭髮:2046
極限粉焰火鞋:2114
極限粉焰火翼:2118
極限粉焰火巾:2058
綠火系列:
極限綠焰頭髮:2047
極限綠焰鞋:2122
極限綠焰翼:2120
極限綠焰巾:2060
小丑上衣3Lv 20021~20027
新海盜上衣 2157
全套精英小丑3Lv 2187
全套精英小丑3Lv 2188
全套精英小丑3Lv 2189
全套精英小丑3Lv 2190
全套精英小丑3Lv 2191
全套精英小丑3Lv 2192
全套精英小丑3Lv 2193
下裝
精英小丑下裝 綠焰鞋子 2122
Dr.Hell 鞋子 2019
脖子
傳說的 火焰圍巾 2038
傳說的 藍焰圍巾 2040
黑暗圍巾 2048
傳說的 白焰圍巾 20493
傳說的 粉紅圍巾 20580
傳說的 綠焰圍巾 2060
手
精英小丑手套
安琪公主的 手套 2043
大運橘翼:5014
普通裝備系列:
黃金月桂:2050
銀色月桂:2103

链球：803（有2个，还有个是：751，不知道有什么区别）黄金AK：177（有2个，还有个是：196，177是CF点购买，196是99999999GP购买）雪花手雷：790（有2个，还有个是：562，562的是2500CF点/30天，790的不知道）玫瑰斧头：762百城AWM：757百城AK：756百城M4A1：755（百城系列均为8800CF点/7天）黄金M249：754FN F2000：753双枪沙鹰：752圣诞斧头：735（有2个，还有个是：560）圣诞沙鹰：734（有2个，还有个是：559）圣诞MP5：733圣诞AWM：732（有2个，还有个是：558）圣诞AK：731圣诞M4：730警棍：722幽灵宝宝手雷：721万圣节M4：720万圣节AK74：719万圣节AK47：718黄金毛瑟：717黄金温彻蒂斯：715水晶箱子：710翼龙箱子：779巨兽箱子：714WEM闪光：706（WEM系列均为18000CF点/90天）WEM烟*****：705WEM手雷：704WEM斧头：703WEM小刀：702WEMAWM：698WEMSG552：697WEMAUG：696WEMAK47：695WEMM4：694WEMP90：693WEMMP5：692WEMM60：691海豹突击队：688**XM8：683**AK47：682月饼手雷：681蓝色魅影：673AWM-pink：667M4A1-pink：666终身荣誉会员名片：662（99999999CF点/30天）足球手雷：642微笑手雷：619黄金左轮：618黄金AWM：617黄金斧头：616黄金RPK：600黄金乌尔滋：595京剧背包：593M4A1-RED：586黄金加特林：578福字手雷：572LOVE手雷：571M4A1-T（虎皮M4）：569MK5-T（虎皮雷蛇）：568圣诞手雷：563全能玩家名片：556杰出玩家名片：555温彻蒂斯-S：552鞭炮手雷：536黄金柯尔特：533黄金汤姆逊：532增加攻击速度道具：506联想黄金AK：493MP7-A：492减少停顿道具：491降低脚步道具：486降低呼吸道具：485村正（**武士刀）：476（800CF点/3天）百事可乐名片：462黄金M4A1：461百城联赛冠军名片：457百城联赛我最强喷漆：456急救箱：407蓝色烟*****：197（1990CF点/30天）黄色烟*****：196（1990CF点/30天）黄金沙鹰：195（有2个，还有个是：182）福手雷：193M4A1-QQ会员：189雷蛇：176K1A：117（33000GP）M9手枪：104混沌之翼：775(999999999CF点/30天)利爪之锋：750(999999999CF点/30天)下面是2个未知武器，一卡这2个代码CF就会自动关闭。

中文开局名称A00: 不规则开局A01: 尼姆佐维奇-拉尔森开局A02: 伯德开局A03: 伯德开局 with 1...d5A04: 列蒂开局: 1 Nf3 and 王翼印度 进攻A05: 列蒂开局: 1 Nf3 Nf6A06: 列蒂开局: 1 Nf3 d5A07: 列蒂开局: 王翼印度进攻(巴斯扎体系)A08: 列蒂开局: 王翼印度进攻A09: 列蒂开局: 1 Nf3 d5 2 c4A10: 英国开局: Unusual Replies for BlackA11: 英国开局: 卡罗-卡因防御式体系1...c6A12: 英国开局: 卡罗-卡因防御式体系1...c6 with b3 by White A13: 英国开局: 1...e6A14: 英国开局: 新卡塔兰拒弃兵1...e6 with b3 by WhiteA15: 英国开局: 盎格鲁-印度防御1...Nf6A16: 英国开局: 1...Nf6 with ...d5A17: 英国开局: 1...Nf6 with ...Bb4A18: 英国开局: 米肯纳斯-卡尔斯变例(1 c4 Nf6 2 Nc3 e6 3 e4) A19: 英国开局: 米肯纳斯-卡尔斯变例,西西里变例 with 3...c5 A20: 英国开局: 1...e5A21: 英国开局: 1...e5 2 Nc3A22: 英国开局: 1...e5 2 Nc3 Nf6A23: 英国开局: 布列曼体系，凯列斯变例1...e5 2 Nc3 Nf6 3 g3 c6A24: 英国开局: 布列曼体系Lines without ...Nc6A25: 英国开局: 先手西西里with ...Nc6 but without early d3 A26: 英国开局: 封闭体系with ...Nc6 and d3A27: 英国开局: 三马变例A28: 英国开局: 四马变例A29: 英国开局: 四马变例 王翼侧翼象with 4 g3A30: 英国开局: 对称变例A31: 英国开局: 对称变例 别诺尼结构2 Nf3 Nf6 3 d4A32: 英国开局: 对称变例2 Nf3 Nf6 3 d4 cxd4 4 Nxd4 e6A33: 英国开局: 对称变例2 Nf3 Nf6 3 d4 cxd4 4 Nxd4 e6 5 Nc3 Nc6A34: 英国开局: 对称变例2 Nc3, lines with ...d5A35: 英国开局: 对称变例2 Nc3 Nc6 3 Nf3A36: 英国开局: 对称变例vs ...g6: 4 Bg2 Bg7A37: 英国开局: 对称变例vs ...g6: 4 Bg2 Bg7 5 Nf3A38: 英国开局: 对称变例vs ...g6: 4 Bg2 Bg7 5 Nf3 Nf6A39: 英国开局: 对称变例 d4主线vs ...g6: 4 Bg2 Bg7 5 Nf3 Nf6 6 0-0 0-0 7 d4A40: 后兵开局A41: 后兵开局:1 d4 d6: Tartakower 体系 and 现代防御A42: 现代防御: 阿维尔巴赫体系A43: 旧式别诺尼防御A44: 旧式别诺尼防御A45: 后兵开局:Trompowsky 进攻A46: 后兵开局:1 d4 Nf6 2 Nf3 e6: Torre, London and Colle 体系sA47: 后翼印度防御:1 d4 Nf6 2 Nf3 b6: Torre, London and Colle 体系sA48: 王翼印度: 东印度防御1 d4 Nf6 2 Nf3 g6: Torre, London and Colle 体系sA49: 王翼印度: 侧翼象无c4 1 d4 Nf6 2 Nf3 g6 3 g3: Anti-王翼印度 体系sA50: 后兵开局:后翼 Fianchetto 防御 (1 d4 Nf6 2 c4 b6)A51: 布达佩斯防御拒弃兵A52: 布达佩斯弃兵A53: 古印度防御 without Nf3A54: 古印度防御 with Nf3, but without e4A55: 古印度防御 with Nf3 and e4A56: 别诺尼防御A57: 平科弃兵/伏尔加弃兵A58: 平科接受弃兵: Lines with 5 bxa6A59: 平科弃兵: White castles by handA60: 现代别诺尼防御: Early DivergencesA61: 现代别诺尼防御: Nf3 without early e4A62: 现代别诺尼防御: 侧翼象变例 without early ...Nbd7A63: 现代别诺尼防御: 侧翼象变例: 9...Nbd7A64: 现代别诺尼防御: 侧翼象变例: 9...Nbd7 10 Nd2 a6 11 a4 Re8A65: 现代别诺尼防御: 6 e4A66: 现代别诺尼防御: 兵涛变例A67: 现代别诺尼防御: 泰曼诺夫变例A68: 现代别诺尼防御: 四兵进攻 without 9...Re8A69: 现代别诺尼防御: 四兵进攻 with 9...Re8A70: 现代别诺尼防御: 6 e4 g6 7 Nf3A71: 现代别诺尼防御: 6 e4 g6 7 Nf3 Bg7 8 Bg5 without Be2A72: 现代别诺尼防御: 古典变例: Lines with Bg5A73: 现代别诺尼防御: 古典变例: Unusual Black 9th movesA74: 现代别诺尼防御: 古典变例: 9...a6A75: 现代别诺尼防御: 古典变例: 9...a6 10 a4 Bg4A76: 现代别诺尼防御: 古典变例: 9...Re8 10 Qc2A77: 现代别诺尼防御: 古典变例: 9...Re8 10 Nd2: 10...a6 and 10...Nbd7A78: 现代别诺尼防御: 古典变例: 9...Re8 10 Nd2 Na6A79: 现代别诺尼防御: 古典变例: 9...Re8 10 Nd2 Na6 11 f3A80: 荷兰防御: Unusual White second movesA81: 荷兰防御: 2 g3A82: 荷兰防御: 斯汤顿弃兵A83: 荷兰防御: 斯汤顿弃兵 with 3 Nc3 Nf6 4 Bg5A84: 荷兰防御: 2 c4 MiscellaneousA85: 荷兰防御: 2 c4 Nf6 3 Nc3A86: 荷兰防御: 列宁格勒体系: Unusual lines and 5 Nh3A87: 荷兰防御: 列宁格勒体系: 5 Nf3A88: 荷兰防御: 列宁格勒体系: 5 Nf3 0-0 6 0-0 d6 7 Nc3 c6A89: 荷兰防御: 列宁格勒体系: 5 Nf3 0-0 6 0-0 d6 7 Nc3 Nc6 A90: 荷兰防御: Miscellaneous and 现代 Stonewall (with ...Bd6)A91: 古典荷兰: Early DeviationsA92: 古典荷兰: 古典石墙(with ...Be7): Early deviationsA93: 古典荷兰: 古典石墙，鲍特维尼克变例: 7 b3A94: 古典荷兰: 古典石墙: 7 b3 c6 8 Ba3A95: 古典荷兰: 古典石墙: 7 Nc3 c6A96: 古典荷兰: 伊尔因-热涅夫斯基变例: Early deviationsA97: 古典荷兰: 伊尔因-热涅夫斯基变例: 7 Nc3 Qe8A98: 古典荷兰: 伊尔因-热涅夫斯基变例: 7 Nc3 Qe8 8 Qc2A99: 古典荷兰: 伊尔因-热涅夫斯基变例: 7 Nc3 Qe8 8 b3B00: 王兵开局: 后翼 Fianchetto 防御, Nimzowitsch 防御B01: 斯堪地维纳亚(中心反击)中心防御B02: 阿廖欣防御: Chase 变例 and lines with early Nc3B03: 阿廖欣防御: 4 兵进攻B04: 阿廖欣防御: 现代变例4 Nf3B05: 阿廖欣防御: 现代变例4 Nf3 Bg4B06: 现代防御B07: 皮尔茨防御: 乌菲姆采夫防御B08: 皮尔茨: 古典(双马)方案B09: 皮尔茨(乌菲姆采夫): 奥地利进攻B10: 卡罗-卡恩防御: 2 d3 and 2 c4B11: 卡罗-卡恩防御: 双马变例B12: 卡罗-卡恩防御: Advance 变例B13: 卡罗-卡恩防御: 兑换变例 and Panov-Botvinnik 进攻B14: 卡罗-卡恩防御: 帕诺夫-鲍特维尼克进攻 with 5...e6 and 5...g6B15: 卡罗-卡恩防御: 3 Nc3: 3...g6 and 3...dxe4 4 Nxe4 Nf6 5 Nxf6+ exf6B16: 卡罗-卡恩防御: 布龙式变例斯坦-拉尔森变例B17: 卡罗-卡恩防御: 斯坦尼茨变例 (4...Nd7)B18: 卡罗-卡恩防御: 古典变例4...Bf5 sidelinesB19: 卡罗-卡恩防御: 古典变例4...Bf5 main lineB20: 西西里防御: Unusual White 2nd movesB21: 西西里防御: 2 f4 and Morra弃兵B22: 西西里防御: 2 c3B23: 西西里防御: 封闭式 Lines without g3B24: 西西里防御: 封闭式 3 g3 sidelinesB25: 西西里防御: 封闭式 3 g3, lines without early Be3B26: 西西里防御: 封闭式 3 g3, lines with early Be3B27: 西西里防御: 2 Nf3, unusual Black 2nd movesB28: 西西里防御: 奥凯利变例 2 Nf3 a6B29: 西西里防御: 尼姆佐维奇-鲁宾斯坦变例2 Nf3 Nf6B30: 西西里防御: 2...Nc6 3 Bb5, lines without ...g6B31: 西西里防御: 尼姆佐维奇-罗索里莫变例 2...Nc6 3 Bb5 g6 B32: 西西里防御: L鰓enthal and Kalashnikov 变例sB33: 西西里防御: Pelikan and Sveshnikov 变例sB34: 西西里防御: 加速侧翼象兑换变例 with 5 Nc3: sidelines B35: 西西里防御: 加速侧翼象现代变例 with 5 Nc3: main line B36: 西西里防御: 加速侧翼象，马洛契绑定B37: 西西里防御: 加速侧翼象，马洛契绑定 with 5...Bg7, sidelinesB38: 西西里防御: 加速侧翼象，马洛契绑定 with 5...Bg7 and 7...0-0B39: 西西里防御: 加速侧翼象，马洛契绑定 with 5...Bg7 and 7...Ng4B40: 西西里防御: 2...e6, Unusual linesB41: 西西里防御: 卡恩变例 5 c4B42: 西西里防御: 卡恩变例 5 Bd3B43: 西西里防御: 卡恩变例 5 Nc3B44: 西西里防御: Taimanov: 5 Nb5B45: 西西里防御: 泰曼诺夫变例B46: 西西里防御: 泰曼诺夫变例 5 Nc3 a6B47: 西西里防御: 泰曼诺夫变例 5 Nc3 Qc7 6 f4, 6 g3 and 6Be2B48: 西西里防御: 泰曼诺夫变例 5 Nc3 Qc7 6 Be3 a6 withoutBe2B49: 西西里防御: 泰曼诺夫变例 5 Nc3 Qc7 6 Be3 a6 7 Be2B50: 西西里防御: 2...d6, MiscellaneousB51: 西西里防御: 卡纳尔-索科尔斯基(尼姆佐维奇-罗索里莫，莫斯科)进攻 (3 Bb5+) without 3...Bd7B52: 西西里防御: 卡纳尔-索科尔斯基进攻 with 3...Bd7B53: 西西里防御: 切克霍夫变例 2...d6: Lines with Qxd4B54: 西西里防御: 2...d6 3 d4 cxd4 4 Nxd4, Unusual LinesB55: 西西里防御: 普宁斯变例，威尼斯进攻 2...d6 3 d4 cxd4 4 Nxd4 Nf6 5 f3B56: 古典西西里防御: Unusual LinesB57: 古典西西里防御: 索金(非舍文宁根) Sozin with 6...Qb6B58: 古典西西里防御: 古典式6 Be2B59: 古典西西里防御: 布列斯拉夫斯基变例 6 Be2 e5 7 Nb3B60: 西西里防御: 里赫特尔-劳泽尔 Unusual Black 6th moves and 6...Bd7 without 7 Qd2B61: 西西里防御: 里赫特尔-劳泽尔 拉尔森变例 6...Bd7 7 Qd2 B62: 西西里防御: 里赫特尔-劳泽尔 6...e6: Unusual White 7th movesB63: 西西里防御: 里赫特尔-劳泽尔 劳泽尔进攻 7...Be7 and unusual Black 7th movesB64: 西西里防御: 里赫特尔-劳泽尔 劳泽尔进攻 7...Be7 8 0-0-0 0-0 9 f4 without 9...Nxd4B65: 西西里防御: 里赫特尔-劳泽尔 劳泽尔进攻 7...Be7 8 0-0-0 0-0 9 f4 Nxd4B66: 西西里防御: 里赫特尔-劳泽尔 劳泽尔进攻 7...a6 8 0-0-0 h6B67: 西西里防御: 里赫特尔-劳泽尔 劳泽尔进攻 7...a6 8 0-0-0 Bd7, lines without 9 f4 Be7B68: 西西里防御: 里赫特尔-劳泽尔 劳泽尔进攻 7...a6 8 0-0-0 Bd7 9 f4 Be7B69: 西西里防御: 里赫特尔-劳泽尔 劳泽尔进攻 7...a6 8 0-0-0 Bd7 9 f4 Be7 10 Nf3 b5 11 Bxf6B70: 西西里 龙式变例: 6 g3 and 6 Be2 (without a later Be3) B71: 西西里 龙式变例: 列文菲舍变例 6 f4B72: 西西里 龙式变例: 6 Be3, lines with h3+Bc4 andsidelinesB73: 西西里 龙式变例: 古典体系 without 9 Nb3B74: 西西里 龙式变例: 古典体系 with 9 Nb3B75: 西西里 龙式变例: 南斯拉夫进攻, MiscellaneousB76: 西西里 龙式变例: 南斯拉夫进攻, 9 g4 and 9 0-0-0B77: 西西里 龙式变例: 南斯拉夫进攻, 9 Bc4 sidelinesB78: 西西里 龙式变例: 南斯拉夫进攻, 9 Bc4 Bd7 10 0-0-0 Rc8 B79: 西西里 龙式变例: 南斯拉夫进攻, 9 Bc4 Bd7 10 0-0-0 Qa5 B80: 西西里防御 舍维宁根变例: 6 g3 and 6 Be3, including English 进攻B81: 西西里防御 舍维宁根变例: 凯列斯进攻 Keres 进攻B82: 西西里防御 舍维宁根变例: 6 f4B83: 西西里防御 舍维宁根变例: 6 Be2, lines without ...a6B84: 西西里防御 舍维宁根变例(保尔森): 古典变例 6 Be2 a6, lines without early Be3B85: 西西里防御 舍维宁根变例: 古典变例 6 Be2 a6, lines with early Be3B86: 西西里防御 舍维宁根/纳尔道夫: 6 Bc4, without early ...b5B87: 西西里防御 舍维宁根/纳尔道夫: 6 Bc4, with early ...b5 B88: 西西里防御: 索金，列昂哈德变例B89: 西西里防御: 索金进攻B90: 西西里防御 纳尔道夫: Unusual White 6th moves, 6 Be3 Ng4 and 6 Be3 e5B91: 西西里防御 纳尔道夫: 侧翼象变例 6 g3B92: 西西里防御 纳尔道夫: 侧翼象变例 6 Be2B93: 西西里防御 纳尔道夫: 6 f4B94: 西西里防御 纳尔道夫: 6 Bg5 Nbd7B95: 西西里防御 纳尔道夫: 6 Bg5 e6, unusual White 7th moves B96: 西西里防御 纳尔道夫: 6 Bg5 e6 7 f4, lines other than 7...Qb6 and 7...Be7B97: 西西里防御 纳尔道夫: Poisoned PawnB98: 西西里防御 纳尔道夫: 6 Bg5 e6 7 f4 Be7, sidelinesB99: 西西里防御 纳尔道夫: 6 Bg5 e6 7 f4 Be7 8 Qf3 Qc7 9 0-0-0 Nbd7C00: 法兰西防御: Unusual White 2nd movesC01: 法兰西防御: 兑换变例C02: 法兰西防御: 推进变例C03: 法兰西防御: 塔拉什 Unusual Black 3rd movesC04: 法兰西防御: 塔拉什，吉马德主线 3...Nc6C05: 法兰西防御: 塔拉什，封闭变例 3...Nf6 4 e5 Nfd7, 5 f4 and 5 Bd3 sidelinesC06: 法兰西防御: 塔拉什，封闭变例 3...Nf6 4 e5 Nfd7 5 Bd3 main linesC07: 法兰西防御: 塔拉什，开放变例 3...c5, 4 Ngf3 and 4 exd5 Qxd5C08: 法兰西防御: 塔拉什，开放变例 3...c5 4 exd5 exd5 sidelinesC09: 法兰西防御: 塔拉什，开放变例 3...c5 4 exd5 exd5 5 Ngf3 Nc6C10: 法兰西防御: 保尔森变例 with 3 Nc3: Unusual Black 3rd moves and 3...dxe4C11: 法兰西防御: 4 e5 and 4 Bg5 dxe4C12: 法兰西防御: 迈克卡西昂变例 McCutcheon 变例C13: 法兰西防御: 古典 体系: 4 Bg5 Be7, Alekhine-Chatard 进攻C14: 法兰西防御: 古典 体系: 4 Bg5 Be7 main lineC15: 法兰西防御: 温纳维尔(尼姆佐维奇)变例 3 Nc3 Bb4: Unusual White 4th movesC16: 法兰西防御: 温纳维尔，推进变例 3 Nc3 Bb4 4 e5: Lines without ...c5C17: 法兰西防御: 温纳维尔，推进变例 3 Nc3 Bb4 4 e5 c5 sidelinesC18: 法兰西防御: 温纳维尔，推进变例 3 Nc3 Bb4: Main line: 7 h4 and 7 Qg4C19: 法兰西防御: 温纳维尔，推进变例 3 Nc3 Bb4: Main line: 7 Nf3 and 7 a4C20: 王兵开局: 1 e4 e5: Unusual White second movesC21: 丹麦弃兵C22: 中心开局C23: 飞象局: 2...Bc5C24: 飞象局: 2...Nf6C25: 维也纳开局: Alternatives to 2...Nf6C26: 维也纳开局: 佛克比尔变例 2...Nf6, sidelinesC27: 维也纳开局: 2...Nf6 3 Bc4 Nxe4C28: 维也纳开局: 2...Nf6 3 Bc4 Nc6C29: 维也纳开局: 考夫曼变例 2...Nf6 3 f4C30: 王翼弃兵 DeclinedC31: 拒王翼弃兵: 佛克比尔反弃兵 3 exd5 c6 and 3...e4 sidelines.C32: 拒王翼弃兵: 佛克比尔反弃兵 3 exd5 e4 4 d3 Nf6C33: 接受王翼弃兵: 3 Nc3 and 3 Bc4C34: 接受王翼弃兵: 3 Nf3: 3...Nf6 and 3...d6C35: 接受王翼弃兵: 科宁汉姆防御 3 Nf3 Be7C36: 接受王翼弃兵: 阿巴西亚防御(古典防御，现代防御) 3 Nf3 d5C37: 接受王翼弃兵: 科沃爱德弃兵C38: 接受王翼弃兵: 3 Nf3 g5 4 Bc4 Bg7C39: 接受王翼弃兵: 3 Nf3 g5 4 h4C40: 王翼马开局C41: 菲利多尔防御C42: 俄罗斯防御: 彼得罗夫防御 3 Nxe5 and unusual White 3rd movesC43: 俄罗斯防御: 斯坦尼茨进攻 3 d4C44: 王兵开局C45: 苏格兰开局C46: 三马开局 3 Nc3: Unusual Black 3rd movesC47: 四马开局: 苏格兰变例 with 4 g3C48: 四马开局: 西班牙变例 4 Bb5, replies other than 4...Bb4 C49: 四马开局: “双”路·洛佩兹 4 Bb5 Bb4C50: 匈牙利 防御 and Giuoco PianissimoC51: 伊文思弃兵: 拒弃兵 without 5...Ba5C52: 伊文思弃兵: 接受接受: 5 c3 Ba5C53: 意大利: sidelinesC54: 意大利: 4 c3 Nf6, main lines with 5 d4 and 5 d3C55: 双马防御: 4 d3, 4 d4 exd4 5 e5 and Max Lange 进攻C56: 双马防御: 4 d4 exd4 5 0-0 Nxe4C57: 双马防御: Wilkes-Barre/Traxler and 4 Ng5 d5 5 exd5, unusual Black 5th movesC58: 双马防御: 4 Ng5 d5 5 exd5 Na5 sidelinesC59: 双马防御: 4 Ng5 d5 5 exd5 Na5 5 Bb5+ c6 6 dxc6 bxc6 7 Be2C60: 西班牙: Unusual Black 3rd moves and 3...g6C61: 西班牙: 伯德防御C62: 西班牙: 旧式斯坦尼茨防御C63: 西班牙: 舒切里曼防御C64: 西班牙: 古典(柯德尔)防御 (3...Bc5) except 4 0-0 Nf6C65: 西班牙: 柏林防御 (3...Nf6), unusual lines and 4 0-0Bc5C66: 西班牙: 柏林防御C67: 西班牙: 柏林防御 开放变例 4 0-0 Nxe4C68: 西班牙: 兑换变例, sidelinesC69: 西班牙: 兑换变例 with 5 0-0 f6C70: 西班牙: 3...a6 4 Ba4, Norwegian and Delayed Schliemann C71: 西班牙: 现代斯坦尼茨防御, sidelinesC72: 西班牙: 现代斯坦尼茨防御 5 0-0C73: 西班牙: 现代斯坦尼茨防御 里赫特尔变例 5 Bxc6+C74: 西班牙: 现代斯坦尼茨防御 5 c3 f5C75: 西班牙: 现代斯坦尼茨防御 5 c3 Bd7 6 d4 without ...g6 C76: 西班牙: 现代斯坦尼茨防御 侧翼象(布龙斯坦)防御 5 c3 Bd7 6 d4 g6C77: 西班牙: 摩菲防御 3...a6 4 Ba4 Nf6, unusual linesC78: 西班牙: 5.O-O Ruy Lopez, 5.O-OC79: 西班牙: 延迟斯坦尼茨防御(俄罗斯防御) with 3...a6 4 Ba4 Nf6 5 0-0 d6C80: 西班牙: 开放 塔拉什防御 9 Nbd2C81: 西班牙: 开放 霍维尔防御 (9 Qe2)C82: 西班牙: 开放 9 c3 without 9...Be7C83: 西班牙: 开放 古典防御 9 c3 Be7C84: 西班牙: 封闭防御 Unusual White 6th movesC85: 西班牙: 封闭 兑换变例双重延迟C86: 西班牙: 封闭 沃罗尔进攻C87: 西班牙: 封闭 阿维尔巴赫变例 after 6 Re1 d6C88: 西班牙: 封闭 Anti-Marshall 体系sC89: 西班牙: 封闭 马歇尔反击C90: 西班牙: 封闭 with 7...d6: Early deviationsC91: 西班牙: 封闭 7...d6 8 c3 0-0 9 d4C92: 西班牙: 封闭 9...Be6, Karpov and Flohr-Zaitsev 变例s C93: 西班牙: 封闭 斯梅斯洛夫防御C94: 西班牙: 封闭 布列热尔防御 with 10 d3C95: 西班牙: 封闭 布列热尔防御 with 10 d4C96: 西班牙: 封闭 奇戈林防御: 11 d4, replies other than 11...Qc7C97: 西班牙: 封闭 奇戈林防御: 11 d4 Qc7, sidelinesC98: 西班牙: 封闭 奇戈林防御: 11 d4 Qc7 12 Nbd2 Nc6C99: 西班牙: 封闭 奇戈林防御: 11 d4 Qc7 12 Nbd2 cxd4D00: 后兵开局: 1 d4 d5: Unusual linesD01: 后兵开局: 里赫特尔-威列索夫进攻D02: 后兵开局: 1 d4 d5 2 Nf3 sidelines, including 2...Nf6 3 g3 and 2...Nf6 3 Bf4D03: 后兵开局: 塔塔科维变例 1 d4 d5 2 Nf3 Nf6 3 Bg5, including Torre 进攻 with early ...d5D04: 后兵开局: Colle 体系D05: 后兵开局: 楚克尔托特变例 with ...e6D06: 后翼弃兵: Symmetrical and Baltic 防御sD07: 拒后翼弃兵: 奇戈林防御D08: 拒后翼弃兵: 阿尔宾反弃兵D09: 拒后翼弃兵: 阿尔宾反弃兵: Main line with 5 g3D10: 拒后翼弃兵: 斯拉夫防御 3 cxd5 (without early Nf3) and 3 Nc3D11: 拒后翼弃兵: 斯拉夫防御 3 Nf3 sidelines and 3...Nf6 4 e3 Bg4D12: 拒后翼弃兵: 斯拉夫防御 3 Nf3 Nf6 4 e3 Bf5D13: 拒后翼弃兵: 斯拉夫防御 兑换变例 without ...Bf5D14: 拒后翼弃兵: 斯拉夫防御 兑换变例 with ...Bf5D15: 拒后翼弃兵: 斯拉夫防御 兑换变例 4 Nc3 a6 and弃兵 lines after 4 Nc3 dxc4D16: 拒后翼弃兵: 斯拉夫接受 阿拉宾变例 5 a4: Lines with 5...Bg4 and 5...Na6D17: 拒后翼弃兵: 斯拉夫防御 捷克防御 5 a4 Bf5: Lines with 6 Nh4 and 6 Ne5D18: 拒后翼弃兵: 荷兰变例 5 a4 Bf5 6 e3D19: 拒后翼弃兵: 荷兰变例 5 a4 Bf5 6 e3: Main line with 9 Qe2D20: 接受后翼弃兵: 3 e3 and 3 e4D21: 接受后翼弃兵: 3 Nf3 sidelinesD22: 接受后翼弃兵: 阿廖欣防御 3 Nf3 a6 4 e3D23: 接受后翼弃兵: 3 Nf3 Nf6 sidelinesD24: 接受后翼弃兵: 3 Nf3 Nf6 4 Nc3D25: 接受后翼弃兵: 4 e3: sidelines and 4...Bg4D26: 接受后翼弃兵: 古典变例 4 e3 e6 5 Bxc5 c5 sidelinesD27: 接受后翼弃兵: 古典变例 7 e4!? and 7 a4D28: 接受后翼弃兵: 古典变例 7 Qe2 with early ...Nc6D29: 接受后翼弃兵: 古典变例 7 Qe2 with early ...Nbd7D30: 拒后翼弃兵: without Nc3D31: 拒后翼弃兵: without ...Nf6 (+ Marshall弃兵 and Noteboom) and 兑换 变例 lines without ...Nf6D32: 拒后翼弃兵: 塔拉什防御 Sidelines and lines without g3 D33: 拒后翼弃兵: 塔拉什防御 6 g3 sidelinesD34: 拒后翼弃兵: 塔拉什防御 6 g3 Nf6 7 Bg2 Be7D35: 拒后翼弃兵: 兑换变例D36: 拒后翼弃兵: 兑换变例 Main line (5 Bg5 c6 6 Qc2)D37: 拒后翼弃兵: 5 Bf4D38: 拒后翼弃兵: 拉戈金变例 (4 Nf3 Bb4)D39: 拒后翼弃兵: 拉戈金变例 维也纳变例 with 5 Bg5 dxc4D40: 拒后翼弃兵: 半塔拉什防御 with 5 e3D41: 拒后翼弃兵: 半塔拉什防御 with 5 cxd5D42: 拒后翼弃兵: 半塔拉什防御 5 cxd5 Nxd5 6 e3 Nc6 7 Bd3D43: 拒后翼弃兵: 半斯拉夫 5 Bg5 h6D44: 拒后翼弃兵: 半斯拉夫 Botvinnik 体系D45: 拒后翼弃兵: 半斯拉夫 5 e3D46: 拒后翼弃兵: 半斯拉夫 5 e3 Nbd7 6 Bd3, Black avoids the MeranD47: 拒后翼弃兵: 半斯拉夫 梅兰体系D48: 拒后翼弃兵: 半斯拉夫 梅兰体系: 7...b5 8 Bd3 a6D49: 拒后翼弃兵: 半斯拉夫 梅兰体系: Main line with 9 e4 c5 10 e5 cxd4 11 Nxb5D50: 拒后翼弃兵: 荷兰-Peruvian弃兵D51: 拒后翼弃兵: 4 Bg5 Nbd7 sidelinesD52: 拒后翼弃兵: Cambridge Springs 变例D53: 拒后翼弃兵: 4 Bg5 Be7: Early deviationsD54: 拒后翼弃兵: 反新正统变例 4 Bg5 Be7: Lines without Nf3 D55: 拒后翼弃兵: 4 Bg5 Be7: Lines without ...h6 and 6...h6 7 Bxf6D56: 拒后翼弃兵: 拉斯克防御D57: 拒后翼弃兵: 拉斯克防御 主线 (9 cxd5)D58: 拒后翼弃兵: 塔塔科维(马卡贡诺夫-邦达列夫斯基)体系D59: 拒后翼弃兵: 塔塔科维(马卡贡诺夫-邦达列夫斯基)体系 主线(8 cxd5 Nxd5)D60: 拒后翼弃兵: 正统防御 Unusual White 7th movesD61: 拒后翼弃兵: 正统防御 鲁宾斯坦变例 7 Qc2D62: 拒后翼弃兵: 正统防御 7 Qc2 c5 8 cxd5D63: 拒后翼弃兵: 正统防御 7 Rc1D64: 拒后翼弃兵: 正统防御 正统防御，鲁宾斯坦进攻(带Rc1) 7 Rc1 c6 8 Qc2D65: 拒后翼弃兵: 正统防御 鲁宾斯坦进攻 主线 7 Rc1 c6 8 Qc2 a6 9 cxd5D66: 拒后翼弃兵: 正统防御 主线 (7 Rc1 c6 8 Bd3)D67: 拒后翼弃兵: 正统防御 古典防御 卡帕布兰卡 with 9...Nd5 D68: 拒后翼弃兵: 正统防御 古典防御 with 9...Nd5 and 12...e5D69: 拒后翼弃兵: 正统防御 古典防御 with 9...Nd5 and 12...e5 13 dxe5D70: 新格林菲尔德防御: Unusual White 3rd moves (met by (5)D71: 新格林菲尔德防御: 3 g3 d5 sidelines and 5 cxd5 (without Nf3)D72: 新格林菲尔德防御: 5 cxd5 Nxd5 6 e4 Nb6 (without Nf3) D73: 新格林菲尔德防御: 5 Nf3D74: 新格林菲尔德防御: 主线 (5 Nf3 0-0 6 cxd5 Nxd5 7 0-0) D75: 新格林菲尔德防御: 主线 with 7...c5D76: 新格林菲尔德防御: 主线 with 7...Nb6D77: 新格林菲尔德防御: 6 0-0: Replies other than 6...c6D78: 新格林菲尔德防御: 6 0-0 c6D79: 新格林菲尔德防御: Symmetrical 变例 (6 0-0 c6 7 cxd5 cxd5)D80: 格林菲尔德防御: Unusual White 4th moves and 4 Bg5D81: 格林菲尔德防御: 俄罗斯变例 4 Qb3D82: 格林菲尔德防御: 4 Bf4D83: 格林菲尔德弃兵: 4 Bf4 Bg7 5 e3 0-0D84: 格林菲尔德防御接受弃兵: 4 Bf4 Bg7 5 e3 0-0 6 cxd5D85: 格林菲尔德防御: 兑换变例 Unusual White 7th moves and lines with 7 Nf3D86: 格林菲尔德防御: 兑换变例 古典变例 (7 Bc4)D87: 格林菲尔德防御: 兑换变例 斯帕斯基变例 without ...cxd4 D88: 格林菲尔德防御: 兑换变例 斯帕斯基变例 10 Be3 cxd4 11 cxd4D89: 格林菲尔德防御: 兑换变例 斯帕斯基变例 10 Be3 cxd4 11 cxd4 Bg4 12 f3 Na5 13 Bd3D90: 格林菲尔德: 三马变例 4 Nf3 Bg7 sidelinesD91: 格林菲尔德: 三马变例 4 Nf3 Bg7 5 Bg5D92: 格林菲尔德: 4 Nf3 Bg7 5 Bf4D93: 格林菲尔德: 4 Nf3 Bg7 5 Bf4 0-0 6 e3D94: 格林菲尔德: 4 Nf3 Bg7 5 e3D95: 格林菲尔德: 4 Nf3 Bg7 5 e3 0-0 6 Qb3D96: 格林菲尔德: 俄罗斯变例 (5 Qb3): sidelinesD97: 格林菲尔德: 俄罗斯变例 7 e4, replies other than 7...Bg4D98: 格林菲尔德: 俄罗斯变例 斯梅斯洛夫变例 7 e4 Bg4D99: 格林菲尔德: 俄罗斯变例 斯梅斯洛夫变例 7 e4 Bg4 8 Be3 Nfd7 9 Qb3E00: 后兵开局 卡塔兰 Bogo-印度(3 g3 Bb4+)E01: 卡塔兰(加泰罗尼亚)，封闭 Early deviationsE02: 卡塔兰: 开放 5 Qa4+E03: 卡塔兰: 开放 阿廖欣变例 5 Qa4+ Nbd7 6 Qxc4E04: 卡塔兰: 开放 5 Nf3E05: 卡塔兰: 开放 古典路线 5 Nf3 Be7E06: 卡塔兰: 封闭 Early deviationsE07: 卡塔兰: 封闭 主线 (5 Nf3 0-0 6 0-0 Nbd7)E08: 卡塔兰: 封闭 主线: 7 Qc2E09: 卡塔兰: 封闭 主线: 7 Qc2 c6 8 Nbd2E10: 后兵开局: Blumenfeld弃兵E11: 波刚-印度防御E12: 后翼印度防御: Unusual White 4th moves, 4 a3, 4 Nc3 Bb7 5 a3 and 4 Nc3 Bb7E13: 后翼印度防御: 4 Nc3 Bb7 5 Bg5 h6 6 Bh4 Bb4E14: 后翼印度防御: 古典 变例 (4 e3)E15: 后翼印度防御: 4 g3 sidelines, 4 g3 Ba6 and 4 g3 Bb7 early deviationsE16: 后翼印度防御: 卡帕布兰卡变例4 g3 Bb7 5 Bg2 Bb4+E17: 后翼印度防御: 4 g3 Bb7 5 Bg2 Be7E18: 后翼印度防御: 旧式主线 (4 g3 Bb7 5 Bg2 Be7 6 0-0 0-0 7 Nc3)E19: 后翼印度防御: 旧式主线 with 7...Ne4 8 Qc2 Nxc3 8 Qxc3 E20: 尼姆佐-印度防御: 4 g3 and 4 f3E21: 尼姆佐-印度防御: 三马变例 4 Nf3E22: 尼姆佐-印度防御: 斯皮尔曼变例 4 Qb3E23: 尼姆佐-印度防御: 斯皮尔曼变例 4 Qb3 c5 5 dxc5 Nc6E24: 尼姆佐-印度防御: 杰米什变例 Unusual Black 5th moves and 5...c5 sidelinesE25: 尼姆佐-印度防御: 杰米什，凯列斯变例 5...c5 6 f3 d5 7 cxd5E26: 尼姆佐-印度防御: 杰米什变例 5...c5 6 e3E27: 尼姆佐-印度防御: 杰米什变例 5...0-0 6 f3E28: 尼姆佐-印度防御: 杰米什变例 5...0-0 6 e3E29: 尼姆佐-印度防御: 杰米什变例 5...0-0 6 e3 c5 7 Bd3 Nc6 E30: 尼姆佐-印度防御: 列宁格勒变例E31: 尼姆佐-印度防御: 列宁格勒变例 4...h6 5 Bh4 c5 6 d5 d6 E32: 尼姆佐-印度防御: 古典变例 (4 Qc2): 4...0-0E33: 尼姆佐-印度防御: 古典变例 4...Nc6E34: 尼姆佐-印度防御: 古典 挪阿变例 4...d5E35: 尼姆佐-印度防御: 古典 挪阿变例 4...d5 5 cxd5 exd5E36: 尼姆佐-印度防御: 古典 挪阿变例 4...d5 5 a3E37: 尼姆佐-印度防御: 古典 挪阿变例 4...d5 5 a3 Bxc3+ 6 Qxc3 Ne4E38: 尼姆佐-印度防御: 古典变例 4...c5E39: 尼姆佐-印度防御: 古典 皮尔茨变例 4...c5 5 dxc5 0-0E40: 尼姆佐-印度防御: (4 e3): Unusual Black 4th movesE41: 尼姆佐-印度防御: 4...c5 5 Bd3, including H黚ner 变例E42: 尼姆佐-印度防御: 4...c5 5 Ne2E43: 尼姆佐-印度防御: 菲舍尔变例 4...b6E44: 尼姆佐-印度防御: 菲舍尔变例 4...b6 5 Ne2E45: 尼姆佐-印度防御: 布龙斯坦变例 4...b6 5 Ne2 Ba6E46: 尼姆佐-印度防御: 4 e3 0-0 5 Ne2 without early Bd3E47: 尼姆佐-印度防御: 5 Bd3 without ...d5E48: 尼姆佐-印度防御: 5 Bd3 d5 including 6 Ne2, but excluding 6 a3E49: 尼姆佐-印度防御: 鲍特维尼克体系 5 Bd3 d5 6 a3 Bxc3+ 7 bxc3E50: 尼姆佐-印度防御: 4...0-0 5 Nf3E51: 尼姆佐-印度防御: 4...0-0 5 Nf3 d5E52: 尼姆佐-印度防御: 4...0-0 5 Nf3 d5 6 Bd3 b6E53: 尼姆佐-印度防御: 主线带 (4...0-0 5 Nf3 d5 6 Bd3 c5 7 0-0)E54: 尼姆佐-印度防御: 格里高利奇体系 7...dxc4 8 Bxc4E55: 尼姆佐-印度防御: 格里高利奇体系，布龙斯坦变例 7...dxc4 8 Bxc4 Nbd7E56: 尼姆佐-印度防御: 主线: 7...Nc6E57: 尼姆佐-印度防御: 主线: 7...Nc6 8 a3 dxc4 9 Bxc4 cxd4 E58: 尼姆佐-印度防御: 主线: 7...Nc6 8 a3 Bxc3E59: 尼姆佐-印度防御: 主线: 7...Nc6 8 a3 Bxc3 9 bxc3 dxc4 E60: 王翼印度: Unusual lines and Fianchetto 变例 withoutNc3E61: 王翼印度: Early deviations for White, including Smyslov 体系E62: 王翼印度: 侧翼象变例 6...c6 and Panno 变例 (6...Nc6) without ...a6E63: 王翼印度: 侧翼象变例 潘诺变例 with 7...a6E64: 王翼印度: 侧翼象变例 南斯拉夫体系 6...c5 7 d5E65: 王翼印度: 侧翼象变例 南斯拉夫体系 6...c5 7 0-0 without d5 by WhiteE66: 王翼印度: 侧翼象变例 南斯拉夫 潘诺 6...c5 7 0-0 Nc6 8 d5E67: 王翼印度: 侧翼象变例 6...Nbd7E68: 王翼印度: 侧翼象变例 古典变例 6...Nbd7 7 0-0 e5 8 e4E69: 王翼印度: 侧翼象变例 古典变例 6...Nbd7 7 0-0 e5 8 e4 c6 9 h3E70: 王翼印度: Miscellaneous lines with 4 e4, including 5 Nge2 and 5 Bd3 0-0 6 Nge2E71: 王翼印度: 马卡贡诺夫体系 4 e4 d6 5 h3E72: 王翼印度: 4 e4 d6 5 g3E73: 王翼印度: 阿维尔巴赫变例 without 6...c5E74: 王翼印度: 阿维尔巴赫变例 6...c5E75: 王翼印度: 阿维尔巴赫变例 6...c5 7 d5 e6E76: 王翼印度: 四兵进攻: Lines specific to 6 Nf3 move-order E77: 王翼印度: 四兵进攻: 6 Be2 incl 6...c5 7 d5 e6 8 Nf3, but not 别诺尼E78: 王翼印度: 四兵进攻: 6 Be2 c5 7 Nf3E79: 王翼印度: 四兵进攻: 6 Be2 c5 7 Nf3 cxd4 8 Nxd4 Nc6 9 Be3E80: 王翼印度: 杰米什变例 Lines without early ...0-0E81: 王翼印度: 杰米什变例 6th move deviations (including 6 Be3 c6)E82: 王翼印度: 杰米什变例 双侧翼象变例 6...b6E83: 王翼印度: 杰米什变例 (6...Nc6): Lines without either Nge2 or Qd2E84: 王翼印度: 杰米什变例 潘诺主线 7 Nge2 a6 8 Qd2 Rb8E85: 王翼印度: 杰米什变例 正统变例 6...e5E86: 王翼印度: 杰米什变例 正统变例 6...e5 7 Nge2 c6E87: 王翼印度: 杰米什变例 正统变例 6...e5 7 d5E88: 王翼印度: 杰米什变例 正统变例 6...e5 7 d5 c6E89: 王翼印度: 杰米什变例 正统变例 6...e5 7 d5 c6 8 Nge2 cxd5E90: 王翼印度: 古典变例 Early deviations and 6 h3E91: 王翼印度: 古典变例 6 Be2, unusual replies including 6...c5 and 6...Bg4E92: 王翼印度: 古典变例 6 Be2 e5: 7 dxe5, 7 Be3 and Petrosian 体系 without 7...Nbd7E93: 王翼印度: 古典变例 彼得罗辛体系 with 7...Nbd7E94: 王翼印度: 古典变例 6 Be2 e5 7 0-0: Various Black 7th movesE95: 王翼印度: 古典变例 7...Nbd7 8 Re1E96: 王翼印度: 古典变例 7...Nbd7 8 Re1 c6 9 Bf1 a5E97: 王翼印度: 古典变例 阿朗宁-泰曼诺夫变例(南斯拉夫进攻)(6...e5 7 0-0 Nc6): 8 Be3 and 8 d5 Ne7, not 9 Ne1E98: 王翼印度: 古典变例 阿朗宁-泰曼诺夫变例 9 Ne1E99: 王翼印度: 古典变例 阿朗宁-泰曼诺夫变例 9 Ne1 Nd7 10 f3 f5英文开局名称Irregular OpeningsNimzovich-Larsen attackBird's OpeningBird's OpeningReti OpeningReti Opening, 2..Nf6Reti Opening, 2..d5Reti Opening, King's Indian attack (Barcza system) Reti Opening, King's Indian attackReti Opening, 2..d5 3.c4English OpeningEnglish, Caro-Kann defensive systemEnglish, Caro-Kann defensive systemEnglish OpeningEnglish, Neo-Catalan declinedEnglish, 1…Nf6 (Anglo-Indian defense)English OpeningEnglish OpeningEnglish, Mikenas-Carls variationEnglish, Mikenas-Carls, Sicilian variationEnglish OpeningEnglish OpeningEnglish OpeningEnglish Opening, Bremen system, Keres variation English Opening, Bremen system with 3…g6English Opening, Sicilian ReversedEnglish Opening, Closed systemEnglish Opening, Three knights systemEnglish Opening, Four knights systemEnglish Opening, Four knights, kingside Fianchetto English Opening, Symmetrical variationEnglish Opening, Symmetrical, Benoni formation English Opening, SymmetricalEnglish Opening, SymmetricalEnglish Opening, SymmetricalEnglish Opening, SymmetricalEnglish Opening, SymmetricalEnglish Opening, SymmetricalEnglish Opening, SymmetricalEnglish Opening, Symmetrical, Main line with d4Queen's pawnQueen's pawnModern defense, Averbakh systemOld Benoni defenseOld Benoni defenceQueen's pawn gameQueen's pawn gameQueen's Indian defenseKing's Indian, East Indian defenseKing's Indian, Fianchetto without c4Queen's pawn gameBudapest defense declinedBudapest defenseOld Indian defenseOld Indian, Ukrainian variationOld Indian, Main lineBenoni defenseBenko gambitBenko gambit acceptedBenko gambit, 7.e4Benoni defenseBenoni defenseBenoni, Fianchetto variationBenoni, Fianchetto variation, 9…Nbd7 Benoni, Fianchetto variation, 11…Re8 Benoni, 6.e4Benoni, pawn storm variationBenoni, Taimanov variationBenoni, Four pawns attackBenoni, Four pawns attack, Main line Benoni, Classical with e4 and Nf3Benoni, Classical, 8.Bg5Benoni, Classical without 9.O-OBenoni, Classical, 9.O-OBenoni, Classical, 9…a6, 10.a4Benoni, Classical with …a6 and 10…Bg4 Benoni, Classical, 9…Re8Benoni, Classical, 9…Re8, 10.Nd2Benoni, Classical with …Re8 and …Na6 Benoni, Classical, 11.f3DutchDutch defenseDutch, Staunton gambitDutch, Staunton gambit, Staunton's line Dutch defenseDutch with 2.c4 & 3.Nc3Dutch with 2.c4 & 3.g3Dutch, Leningrad, Main variationDutch, Leningrad, Main variation with 7…c6 Dutch, Leningrad, Main variation with Nc6 Dutch defenseDutch defenseDutch defenseDutch, Stonewall, Botwinnik variation Dutch, Stonewall with Ba3Dutch, Stonewall with Nc3Dutch, Classical variationDutch, Ilyin-Genevsky variationDutch, Ilyin-Genevsky variation with Qc2Dutch, Ilyin-Genevsky variation with b3英文开局名称King's pawn OpeningScandinavian (centercounter) center defenseAlekhine's defenseAlekhine's defenseAlekhine's defense, Modern variationAlekhine's defense, Modern variation, 4...Bg4Robatsch (Modern) defensePirc defensePirc, Classical (Two knights) systemPirc, Austrian attackCaro-Kann defenseCaro-Kann, Two knights, 3...Bg4Caro-Kann defenseCaro-Kann, Exchange variationCaro-Kann, Panov-Botvinnik attack, 5...e6Caro-Kann defenseCaro-Kann, Bronstein-Larsen variationCaro-Kann, Steinitz variationCaro-Kann, Classical variationCaro-Kann, Classical, 7...Nd7Sicilian defenseSicilian, Grand Prix attackSicilian, Alapin's variation (2.c3)Sicilian, ClosedSicilian, ClosedSicilian, ClosedSicilian, Closed, 6.Be3Sicilian defenseSicilian, O'Kelly variationSicilian, Nimzovich-Rubinstein variationSicilian defenseSicilian, Nimzovich-Rossolimo attack (with …g6, without …d6). Sicilian defenseSicilian defenseSicilian, Accelerated Fianchetto, Exchange variationSicilian, Accelerated Fianchetto, Modern variation with Bc4 Sicilian, Accelerated Fianchetto, Maroczy bindSicilian, Accelerated Fianchetto, Maroczy bind,5…Bg7Sicilian, Accelerated Fianchetto, Maroczy bind,6.Be3Sicilian, Accelerated Fianchetto, Breyer variationSicilian defenseSicilian, Kan variationSicilian, Kan, 5.Bd3Sicilian defenseSicilian, Taimanov variationSicilian, Taimanov variationSicilian, Taimanov (Bastrikov) variationSicilian, Taimanov variationSicilian, Taimanov variationSicilianSicilian, Canal-Sokolsky (Nimzovich-Rossolimo, Moscow) attackSicilian, Canal-Sokolsky attack, 3...Bd7Sicilian, Chekhover variationSicilianSicilian, Prins variation, Venice attackSicilianSicilian, Sozin (not Scheveningen)Sicilian, ClassicalSicilian, Boleslavsky variation, 7.Nb3Sicilian, Richter-RauzerSicilian, Richter-Rauzer, Larsen variation, 7.Qd2Sicilian, Richter-Rauzer, 6...e6Sicilian, Richter-Rauzer, Rauzer attackSicilian, Richter-Rauzer, Rauzer attack, 7...Be7 defense, 9.f4 Sicilian, Richter-Rauzer, Rauzer attack, 7...Be7 defense, 9...Nxd4 Sicilian, Richter-Rauzer, Rauzer attack, 7...a6Sicilian, Richter-Rauzer, Rauzer attack, 7...a6 defense, 8...Bd7 Sicilian, Richter-Rauzer, Rauzer attack, 7...a6 defense, 9...Be7 Sicilian, Richter-Rauzer, Rauzer attack, 7...a6 defense, 11.Bxf6Sicilian, Dragon variationSicilian, Dragon, Levenfish variationSicilian, Dragon, 6.Be3Sicilian, Dragon, Classical, 8.O-OSicilian, Dragon, Classical, 9.Nb3Sicilian, Dragon, Yugoslav attackSicilian, Dragon, Yugoslav attack, 7...O-OSicilian, Dragon, Yugoslav attack, 9.Bc4Sicilian, Dragon, Yugoslav attack, 10.O-O-OSicilian, Dragon, Yugoslav attack, 12.h4Sicilian, Scheveningen variationSicilian, Scheveningen, Keres attackSicilian, Scheveningen, 6.f4Sicilian, Scheveningen, 6.Be2Sicilian, Scheveningen (Paulsen), Classical variationSicilian, Scheveningen, Classical variation with ...Qc7 and ...Nc6Sozin with ...a6 and ...b5Sicilian, Sozin, Leonhardt variationSicilian, Sozin, 7.Be3Sicilian, NajdorfSicilian, Najdorf, Zagreb (Fianchetto) variation Sicilian, Najdorf, Zagreb (Fianchetto) variation Sicilian, Najdorf, 6.f4Sicilian, Najdorf, 6.Bg5Sicilian, Najdorf, 6...e6Sicilian, Najdorf, 7.f4Sicilian, Najdorf, 7...Qb6Sicilian, Najdorf, 7...Be7Sicilian, Najdorf, 7...Be7 Main line英文开局名称French defenseFrench, Exchange variationFrench, Advance variationFrench, TarraschFrench, Tarrasch, Guimard Main lineFrench, Tarrasch, Closed variationFrench, Tarrasch, Closed variation, Main lineFrench, Tarrasch, Open variationFrench, Tarrasch, Open, 4.exd5 exd5French, Tarrasch, Open variation, Main line French, Paulsen variationFrench defenseFrench, MacCutcheon variationFrench, ClassicalFrench, Classical variationFrench, Winawer (Nimzovich) variationFrench, Winawer, Advance variationFrench, Winawer, Advance variationFrench, Winawer, Advance variationFrench, Winawer, Advance, 6...Ne7King's pawn gamecenter gamecenter gameBishop's OpeningBishop's Opening, Berlin defenseVienna gameVienna, Falkbeer variationVienna gameVienna gambit, Kaufmann variationKing's gambitKGD, Falkbeer counter-gambitKGD, Falkbeer, 5. dxe4King's gambit acceptedKing's knight's gambitKGA, Cunningham defenseKGA, Abbazia defense (Classical defense, Modern defense)KGA, Quaade gambitKing's knight's gambitKing's knight's gambitKing's knight OpeningPhilidor's defensePetrov's defensePetrov, Modern (Steinitz) attackKing's pawn gameScotch gameThree knights gameFour knights, Scotch variationFour knights, Spanish variationFour knights, double Ruy LopezKing's pawn gameEvans gambit declinedEvans gambitGiuoco pianoGuioco pianoTwo knights defenseTwo knights defenseTwo knights defenseTwo knights defenseTwo knights defenseRuy LopezRuy Lopez, Bird's defenseRuy Lopez, Old Steinitz defenceRuy Lopez, Schilemann defenseRuy Lopez, Classical (Cordel) defenceRuy Lopez, Berlin defenseRuy Lopez, Berlin defence, 4.O-O, d6Ruy Lopez, Berlin defence, Open variationRuy Lopez, Exchange variationRuy Lopez, Exchange variation, 5.O-ORuy Lopez,Ruy Lopez, Modern Steinitz defenseRuy Lopez, Modern Steinitz defense 5.0-0Ruy Lopez, Modern Steinitz defense, Richter variationRuy Lopez, Modern Steinitz defenseRuy Lopez, Modern Steinitz defenseRuy Lopez, Modern Steinitz defense, Fianchetto (Bronstein) variation Ruy Lopez, Morphy defence。

Herring Kingfish Shad Silversides Trigger Wahoo Whale Angler Bashaw Bluegill Bream Cavalla Cobia Croaker Dace Dorado Flasher Flier Flounder Gabilan Gunnel Gurnard Haddo Hake Harder Hoe Jack Lapon Mingo Muskallunge Paddle Pargo Peto PoSS-127 SS-128 SS-129 SS-130 SS-131 SS-132 SS-133 SS-134 SS-135 SS-136 SS-137 SS-138 SS-139 SS-140 SS-141 SS-142 SS-143 SS-144 SS-145 SS-146 SS-147 SS-148 SS-149 SS-150 SS-151 SS-152 SS-153 SS-154 SS-155 SS-156 SS-157 SS-158 SS-159 SS-160
Seawolf Tambor Tautog Thresher Triton Trout Tuna Mackerel Marlin Gar Grampus Grayback Grayling Grenadier Gudgeon Gato Greenling Grouper Growler Grunion Guardfish Albacore Amberjack Barb Blackfish Bluefish Bonefish Cod Cero Corvina Darter Drum Flying Fish Finback Haddock Halibut
SS-233 SS-234 SS-235 SS-236 SS-237 SS-238 SS-239 SS-240 SS-241 SS-242 SS-243 SS-244 SS-245 SS-246 SS-247 SS-248 SS-249 SS-250 SS-251 SS-252 SS-253 SS-254 SS-255 SS-256 SS-257 SS-258 SS-259 SS-260 SS-261 SS-262 SS-263 SS-264 SS-265 SS-266 SS-267 SS-268

093期：08月10日星期二：39-20-12-30-05-08-T23_(龙/紅/单/木）
094期：08月12日星期四：29-17-42-06-48-33-T34_(蛇/紅/双/土）
095期：08月14日星期六：38-17-34-46-06-12-T43_(猴/绿/单/土）
096期：08月17日星期二：25-02-35-08-05-22-T16_(猪/绿/双/火
1期：：11-13-22-16-21-18-T06_(猴/绿/双/水）
2期：：22-28-16-05-14-26-T27_(猪/绿/单/水）
003期：：05-14-45-48-16-25-T42_(猴/蓝/双/土）
004期45-08-16-40-04-39-T10_(龙/蓝/双/金）
005期29-09-30-23-25-48-T01_(牛/红/单/火）
089期：07月31日星期六：37-33-28-29-35-12-T22_(蛇/绿/双/木）
090期：08月03日星期二：17-09-35-31-26-36-T42_(鸡/蓝/双/土）
091期：08月05日星期四：08-46-42-49-30-48-T07_(猴/紅/单/水）
092期：08月07日星期六：46-45-34-18-41-03-T37_(虎/蓝/单/水）
073期：06月19日星期六：12-08-27-13-35-02-T37_(虎/蓝/单/水）
074期：06月22日星期二：04-09-20-02-35-40-T44_(羊/绿/双/水）
075期：06月24日星期四：23-34-05-26-49-31-T24_(兔/红/双/火）
076期：06月26日星期六：20-07-15-41-13-21-T02_(牛/红/双/火）

• Instruction Manual - Tentec Bolt Load Software a lTvaiTentec are an innovative designer of spe-cial purpose bolt tensioning equipmentwith a high level of focus on quality. Thecompany have accreditation to:- ISO 9001,ISO 14001 & ISO 18001Tentec LimitedPlymouth HouseGuns Lane.West Bromwich. West MidlandsUnited Kingdom. B70 9HS Tentec Bolt Load Software 2010Beta VersionThis software is the property of Tentec Limited. Guns Lane. West Bromwich. WestMidlands. UK and is protected by copyright law and international treaties. Unauthor-ised reproduction or distribution of this program, or any portion of it, may result insevere civil and criminal penalties, and will be prosecuted to the maximum extentpossible under the law.Tentec Limited do not accept any liability for errors within or caused by the use of thissoftware.Contents.Page 3 Introduction.Page 4 Project List, Header Window.Page 5 Tool BarsPage 6 Application definition, Joint Inspector.Page 7 Information Tab Bar, Setting up a projectPage 8 Project Definition Window.Page 9 Setting up the application.Page 12 Information Tabs.Page 14 Manual Input Mode, File MenuPage 15 File MenusPage 16 Summary Report.Page 17 Individual Application Report.Minimum System RequirementsOperating system: Windows XP with Service Pack 2 (32-bit edition only), Windows Vista (32-bit or 64-bit editions), Windows 7 Beta (32-bit or 64-bit editions), or Windows Server 2008.Processor: 1 GHz or higher for Windows Vista; 800 MHz or higher for Windows XP Memory: 128 MB of RAM (256 MB or more recommended) for Windows XP; 512 MB for Windows VistaResolution: Minimum 1024 x 768Notes:Tentec Bolt Load Software is currently in beta.It contains data for the Subsea Optimus 6, Optimus 5 & Topside CTST Range of Tentec Bolt Tensioning Tools.It is possible to replace the Tentec Logo on the documentation that the software produces in order to brand the documentation to another company.It is not possible to brand the software to another companyWe would hope that our partners that use the beta version of the software help us by making suggestions and reporting any problems they encounter with the software.It has been developed completely in-house by Tentec and as such we have the ability to implement changes and add features.Due to its beta status the software will fail to work at the end of each month and will require the latest version to be downloaded and installed, this is to ensure our partners are using the latest version.There is currently no input of flange material, it is assumed that adequate strength flange materials are being used. Stainless Steel 316 flanges are not to be tensioned with the recommended bolt stresses.The following flange materials or equivalents are suitable for the recommended bolt stresses.ASTM A105ASTM A182 Grades F65ASTM A182 Grade F60ASTM A182 Grade F52ASTM A182 Grade F50ASTM A182 Grade F51ASTM A350 Grade LF2ASTM A350 Grade LF3ASTM A694 Grade F52ASTM A694 Grade F60ASTM A694 Grade F65Standard ANSI B16.5 Flanges manufactured from material with yield strength equal to or greater than 247N/mm2 (35840lbs/In2)ANSI B16.5 Flange specification does not implicitly specify a minimum target bolt stress. The software will suggest recommend-ed target bolt stress values for these flanges. The recommended values are based on the experience of Tentec Limited and are used without any guarantee or liability to Tentec Limited. The recommended bolt stress values assume that flange material yield strength is equal to or greater than 247N/mm2 (35840lbs/In2).DO NOT USE THE RECOMMENDED ANSI B16.5 BOLT STRESS VALUES FOR FLANGES MANUFACTURED WITH MATE-RIAL YIELD STRENGTH LESS THAN 247N/mm2 (35840lbs/In2)The data produced by this software is only applicable when using Tentec Bolt Tensioning tools.Flange Service Temperature range for the recommended bolt stress values are -101ºc to +200ºc. Or as limited by the piping class specifications or the the bolt minimum or maximum temperature specification. Do not use the recommended bolt stress values outside of this range of temperature.Paul EggintonEngineering DirectorTentec LimitedAugust 2009The Tentec Bolt Load Software is a purpose designed software package, that allows rapid creation of nec-essary documentation for topside and subsea bolt tensioning projects. The package was designed with the philosophy of minimal input, maximum output. Documentation for multiple bolted joint projects can be created very quickly with minimal operator input. The software package contains data for the following standard bolted flanges.ANSI B16.5 MSS-SP44Norsok L-005 issue2IntroductionThe Main ScreenProject ListHeader ScreenThis area gives details of the current selected applications and the global project header information. This area also displays the current selected Tentec tool range.Application Tool BarThis area is the main control tool bar.Project - Global project header information can be set upAdd App - A new blank application can be created.Del App - Applications from the Project List can be deletedSave-Overwrites the currently selected application in the Project list with the currentinformation shown in the application definition areaSave New - Saves a new application entry in the Project List area with the current information in the application definition area.Save PDF’s - Generates a summary document and a multi-page application docu-ment. (PDF Format)View PDFs - Allows the user to view the summary and application documentsApply- Used to update the data in the application definition areaProject Tool BarThis area is above the project list.Project - Global project header information can be set upAdd App - A new blank application can be created.Del App - Applications from the Project List can be deletedJoint InspectorThis area is where the current bolted joint application is displayed.information Tab BarThis area is where catagorised information for the current application is displayed. The are 6 tabs.Bolt StressTorqueLoad GraphBoltToolSequenceSetting up a Project.Selecting the Projects button in the Tool Bar opens up the project definition windowProject Definition WindowHere the user sets up the global project information, which appears on the application documentationCustomerProject NameReference NoDateEngineerNotesSummary Documentation NotesTool Range - Select the relevant range of Tentec tools to use on all applications in the project.Only a single range of tools per project can be selected. It is not possible to change the selected range of tools to use once a project contains an application.Tool Ranges Available• Optimus 5 Subsea Tool Range• Optimus 6 Subsea Tool Range• CTST Topside RangeCross Loading %Here you can set the % factor that defines the global difference between the first and second pass tool pressures when using a 50% or 25% tool to bolt ratio. (It is possible to define a different factor on each application by altering the cross loading %in the application definition areaDefault = 20%Detensioning %Here you can set the % factor that defines the global detensioning pressure. The detensioning pressure is set at the residual bolt load value and a + or - % will set up a deviation from the residual bolt load base value.Torque Coefficient Friction FactorDefines the global friction value to be used on all torque load conversions.(It is possible to define a different friction factor on each application by altering the friction factor in the Information Tab Bar select Torque Tab)Default = 0.12Stress areas are based on:-Defines if the bolt stress is calculated using the Bolt Tensile Stress Area or Bolt MinorDiameter Area. ( The software defaults to Tensile Stress Area)ABCDEFG HJL MKISetting up your first applicationA A free form cell that allows the user to give a unique name to the bolted jointB Defines the flange specification (note the use of the manual input mode is detailedlater in this document, this part of the document only refers to the choice of ANSIFlanges, API Flanges or Norsok Flanges)C Defines the flange rating.D Defines the bolt material for the applicationE Selects the appropriate Tentec tool for the applicationF Allows the user to apply a comment to the application that appears on the individualapplication documentsG Defines the configuration of the flange 1 configuration and enters the thickness ofthe flange at HIn the case of a special thickness flange being used the flange thickness can be edited.J Defines the configuration of the flange 2 configuration and enters the thickness of theflange at KIn the case of a special thickness flange being used the flange thickness can be edited.I Defines the Gasket gap between the 2 mating flanges. This value can be edited.Flange 1Flange 1Flange 2Flange 2Clamp Length 1Clamp Length 2Clamp Length 1select “BlindThread” & enterthe length of en-gaged thread.Note: For a special Blind Threaded hole flange selectBlind Thread in Flange -2 config & enter the value of theengaged thread length into the clamp length 2 field.L In some cases an application may be fitted with washers below the joints application hexagon nuts. Enter the washer thickness here MIt is possible to define a single washer, 2 washers or a single spacer.Selecting “Auto Spacer” from the Spacer drop down menu, allows the software to calculate a suitable spacer thick-ness based on a target Load Transfer Factor (Note the lowest LTF when using bolt tensioning tools is 1.15). The software will not allow a target load transfer factor that is greater than the current LTF.N This cell defines the suitable Bolt diameter for the selected flange. It defaults to anInch imperial thread but can be changed to a metric bolt thread.P This cell defines if a maximum detensioning pressure is detailed on the applicationdocuments. (Refer to the note at the bottom of the summary document regarding the use of max detensioning pressures.)The maximum detensioning pressure defaults to a value equal to the 2nd pass toolpressure B. This can be edited on a global basis in the project definition window. To edit the detensioning pressure, per application, apply a plus or a negative % deviation value to cell U 0% gives a detensioning pressure = Pressure B, first pass pressure.O This cell defines either the pitch (metric threads) or the Threads per Inch - TPI (impe-rial threads) The defaults are:-Imperial threads - 8UN threads except UNC threads below 1” diameter MetricThreads - ISO Course pitch series.It is possible to edit the Pitch/TPI value if the applications calls for different thread forms.N O P QR U WSTQ Defines the number of bolts on the selected flangeS Recommended Reaction Nut Type. The software recommends the type of reaction nut to use and is depenedent on the flange bolt loading requirements. This cell only ap-pears if the selected tool range is Optimus 6.T Residual Bolt Stress, here is where the software recommends the residual boltstress, it can be overwritten by clicking on the cell which opens up a edit windowallow you to save the application to the project if the tool working pressures exceed the maximum working pressure of the tool, in this instance it will offer you a choice of either down rating the target bolt stress to a level within the capacity of the selected tool or to adjust the application parameters.Be aware that if you down rate the recommended residual bolt stress the application will not be tensioned in accordance with API or Norsok specifications. ANSI Flanges do not specify recommended residual bolt stresses.Bolt load can be defined in terms of either.. Target Residual Bolt Stress (psi) (lbs/In2) Target Residual Bolt Stress (N/mm2). Residual % of Bolt Yield (%) Residual Bolt Load (Tons)The edit window allows the user to overwrite the recommended bolt load or bolt stress in a variety of formats. Once the default recommended bolt stress is edited a yellow exclamation icon appears next to the value and the value is italicized. Clicking on the icon restores the default recommended bolt stressInformation Tab BarThe information tab bar consists of 6 Tabs labeled Bolt Stress Torque Load Graph Bolt ToolSequenceBolt Stress TabDisplays Bolt Stress, Bolt Load and % Bolt Yield over a 3 stage time period.Warning indicators will appear if the % bolt yield ex-ceeds 95% of bolt yield. It is Tentec policy not to exceed 95% of the bolt yield strength.This tab also allows the user to switch between using bolt tensile stress area and bolt minor area to calculate bolt stress. When switching a new bolt load is calculated based on the type of bolt area chosen.This tab displays the torque value to achieve the re-sidual bolt load based on the displayed coefficients of friction. The global coefficient of friction value can be edited in the project definition window. Changing the coefficient value in the Torque Tab only changes it for the current application.Torque TabStress Graph TabThis tab displays the predicted bolt stress path overa 3 point time period.T0 = Unstressed boltT1 = Initial bolt stress A pressureT1 = Initial bolt stress B pressureT2 = Final residual bolt stressThe Red line indicates the yield strength of the boltThe yellow line indicates the maximum detension-ing stress.Units can be switched between Metric and Imperial. Bolt TabThis tab displays the bolt detailNo edit is available from this TabThe Bolt Length value is based on the Tentec toolrange chosen in the Project Definition Window. Tool TabThis tab displays the recommended Tensioning ToolNo edit is available from this TabThe Bolt Length value is based on the Tentec toolrange chosen in the project definition window.When a special tensioner is chosen, this tab will bedisabled.Sequence TabThis tab displays the recommended tensioningsequence.Manual Input ModeAll 6 orange fields in the application definition area are to be completed first before the Joint Inspector displays the results. It is recommended that the bolt thread is selected first. Once the thread is selected the software will suggest tensioning tools in the tensioning tool ident menu.The tensioning tool ident menu will display all tools available for the selected bolt size, these include the standard tools from the particular Tentec tool range selected plus any user defined tensioning tools. A user defined tool can be defined by selecting “Spe-cial tool library” from the File/Special Tools Library menu.In manual input mode the software will not recommend a residual bolt stress .Here special tools can be added to your library of tools. Once defined the tool will be available from the Tension-ing Tool Ident cell for selection in manual mode whenever the library click the add button and enter the required the list and select the edit button open up, enter the special tool details. Click OK to leave the special tools library.project file. The name is built from the following vari-ables from the project definition window.Reference: in this case 4064 R1Note R1 represents “Revision1” can be used as a simple revision counter.Project: Pig Launcher Pulling HeadsThe summation of the two viariables makes the project file name.Note:Similar file names are created for the report PDF Files.File MenuThis logo can be changed in order to“Badge” the documentation to anothercompanyTo change the image copy a 220 x 110pxbitmap file to the software installation folder, thefile should be named logo.bmpSummary ReportBolt Load% of Bolt YieldProposed Tensioning ToolKey to GraphT0=Unloaded Bolt T1=Tensioner Initial Load T2= Tensioner Residual Load (retained)Flange Configuration WN WNPredicted Bolt Stress PathPass 11--Pass 2Pass 3Pass 4Pass 11--Pass 11--Checking Pass Pass psi bar Tensioner Bolt #Applied Pressure© 2009 Tentec Limited - All Rights Reserved This Logo can be changed in order to “Badge” the documentation to another companyTo change the image copy a 220 x 110pxbitmap file to the software installation folder, the Individual Application ReportTentec LimitedPlymouth HouseGuns LaneWest Bromwich. West MidlandsUnited Kingdom. B70 9HSTentec products are subject to continual development and Tentec reserve the right to。

防御西西里防御得名于第一个发表这种走法的人的出生地：意大利的西西里岛。

这种开局于19世纪使用的人很少，目前则已经成为对付王前兵开局（1.e4）的有力武器。

西西里防御要求对弈双方具有一定的国际象棋理论素养。

在走此种开局时，双方需要计算精确，连在哪一边“王车易位”也要计算清楚。

有时仅是走子顺序的颠倒，都有可能导致局面的恶化，甚至输棋。

在某些西西里防御的变着中，常会拖至第25回合才结束开局。

西西里防御中，黑方直接在中心区域发起战斗。

典型的情况是：白方由于先行而在王翼占有主动权，黑方则在后翼发起反攻，特别是当黑方的c-兵与白方的d-兵兑换后。

常见的西西里防御的变着是，当白方继走2.Nf3时，黑方一般有3种回应：2...d6: 常见的有纳依道夫变着龙式变着2...e6: 常见的有舍文宁根变着泰马诺夫变着和卡恩变着2...Nc6: 常见的有古典西西里变着以下是西西里防御的常见变着的分别简介。

纳依道夫变着纳依道夫变着得名于特级大师纳依道夫(1910-1997)。

纳依道夫变着因为较新，因此是当前热门的西西里防御的变着。

著名的特级大师菲舍尔和卡斯帕罗夫以善走纳依道夫变着著称于世。

纳依道夫变着中,黑方的计划是以...b5在后翼进攻，然后挺兵至b4。

这样白方位于d4的马就要移动，白方的e4兵可能会失去保护。

黑方以a6兵保护b5格，目的为了抵御白方的双象。

纳依道夫变着中,双方往往向相反的方向易位。

通常白方在后翼易位，而黑方走王翼易位。

白方在第6回合有许多选择可以走：如6.Bg5、6.Be2和6.Be3。

菲舍尔偏好走6.Be4、6.f3、6.f4和6.g3，他偶尔也走6.h3甚至6.Rg1，以准备走7.g4。

双方搏斗最激烈的当属6.Bg5这种变着。

6.Bc4则是索津变着其他的第6回合的变化中，如果黑方走了...e6，则可以转变成舍文宁根变着这时局势和缓，双方可以乘机王车易位。

1.e4 c52.Nf3 d63.d4 cxd44.Nxd4 Nf65.Nc3 a6;2...e6变着舍文宁根变着舍文宁根变着深受当代国际大师的喜爱，特别是执黑棋时。