1779505中文资料

1
Datasheet Rev. EI1 Issued 2005/09 Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' at in the ‘Schrack’ section. Specifications subject to change.
S0368-CC
please contact technical support for washing parameters
Accessories
PCB socket and hold down clip
S0368-CE
Dimensions
S0368-CD S0367-DA
Product key Type Contact configuration A 3 NO + 3 NC contacts B 4 NO + 2 NC contacts C 5 NO + 1 NC contacts Contact material 6 AgSnO2 + 0.2 μm Au Coil Coil code = rated coil voltage (e.g. K24=24 VDC) Other types on request

© Semiconductor Components Industries, LLC, 2011 August, 2011 − Rev. 51Publication Order Number:MMBFJ177LT1/DMMBFJ177LT1GJFET ChopperP−Channel − DepletionFeatures•These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS CompliantMAXIMUM RATINGSRating Symbol Value Unit Drain−Gate Voltage V DG25Vdc Reverse Gate−Source Voltage V GS(r)−25Vdc Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICSTotal Device Dissipation FR−5 Board(Note 1)T A = 25°CDerate above 25°C P D2251.8mWmW/°CThermal Resistance, Junction−to−AmbientR q JA556°C/W Junction and Storage Temperature T J, T stg−55 to +150°C 1.FR−5 = 1.0 0.75 0.062 in.MARKING DIAGRAMSOT−23 (TO−236AB)CASE 318−08STYLE 103GATE1 DRAINDevice Package Shipping†ORDERING INFORMATIONMMBFJ177LT1G SOT−23(Pb−Free)3000 Tape & Reel†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our T ape and Reel Packaging Specifications Brochure, BRD8011/D.16Y M GG6Y= Specific Device CodeM= Date Code*G= Pb−Free Package*Date Code orientation and/or overbar mayvary depending upon manufacturing location.(Note: Microdot may be in either location)2ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)CharacteristicSymbolMinMaxUnitOFF CHARACTERISTICSGate −Source Breakdown Voltage (V DS = 0, I D = 1.0 m Adc)V (BR)GSS 30−Vdc Gate Reverse Current (V DS = 0 Vdc, V GS = 20 Vdc)I GSS − 1.0nAdc Gate Source Cutoff Voltage (V DS = 15 Vdc, I D = 10 nAdc)V GS(off)0.82.5VdcON CHARACTERISTICSZero −Gate −V oltage Drain Current (V GS = 0, V DS = 15 Vdc) (Note 2)I DSS 1.520mAdc Drain Cutoff Current (V DS = 15 Vdc, V GS = 10 Vdc)I D(off)− 1.0nAdc Drain Source On Resistance (I D = 500 m Adc)r DS(on)−300W Input CapacitanceV DS = 0, V GS = 10 Vdcf = 1.0 MHzC iss −11pFReverse Transfer CapacitanceC rss−5.52.Pulse Test: Pulse Width < 300 m s, Duty Cycle ≤ 2%.TYPICAL CHARACTERISTICSFigure 1. Drain Current vs. Drain −SourceVoltageFigure 2. Reverse Transfer CapacitanceV DS , DRAIN −SOURCE VOLTAGE (V)V DS , DRAIN −SOURCE VOLTAGE (V)Figure 3. Input CapacitanceV DS , DRAIN −SOURCE VOLTAGE (V)I D , D R A I N C U R R E N T (m A )C r s s , R E V E R S E T R A N S F E R C A P A C I T A N C E (p F )C i s s , I N P U T C A P A C I T A N C E (p F )PACKAGE DIMENSIONSNOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: INCH.3.MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISHTHICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL.4.DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,PROTRUSIONS, OR GATE BURRS.VIEW CDIM A MIN NOM MAX MINMILLIMETERS0.89 1.00 1.110.035INCHES A10.010.060.100.001b 0.370.440.500.015c 0.090.130.180.003D 2.80 2.90 3.040.110E 1.20 1.30 1.400.047e 1.78 1.90 2.040.070L 0.100.200.300.0040.0400.0440.0020.0040.0180.0200.0050.0070.1140.1200.0510.0550.0750.0810.0080.012NOM MAX L1 2.10 2.40 2.640.0830.0940.104H E 0.350.540.690.0140.0210.0290−−−100−−−10q°°°°SOT −23 (TO −236AB)CASE 318−08ISSUE AP*For additional information on our Pb −Free strategy and solderingdetails, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.SOLDERING FOOTPRINT*ǒmm inchesǓSCALE 10:1STYLE 10:PIN 1.DRAIN2.SOURCE3.GATEON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATION分销商库存信息:ONSEMIMMBFJ177LT1G MMBFJ177LT1。

Extract from the online catalogThe illustration shows a 15-position version Plug component, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08 mm, no. of positions: 10, type of connection: Screw connectionOrd designation MSTB 2,5/10-ST-5,08 Catalog page information Page 126 (CC-2005) Technical dataTightening torque, min 0.5 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kVRated surge voltage (III/2) 4 kVRated surge voltage (II/2) 4 kVRated voltage (III/2) 320 VRated voltage (II/2) 630 VConnection in acc. with standard EN-VDE12 ANominal current IN250 VNominal voltage UNNominal cross section 2.5 mm²Maximum load current 12 A (with 2.5 mm² conductor cross section) Insulating material PAInflammability class acc. to UL 94 V0Internal cylindrical gage A3Stripping length 7 mmConnection dataConductor cross section, rigid min. 0.2 mm²Conductor cross section, rigid max. 2.5 mm²Conductor cross section flexible min. 0.2 mm²Conductor cross section, flexible max. 2.5 mm²0.25 mm²Conductor cross section flexible, with ferrule withoutplastic sleeve min.Conductor cross section flexible, with ferrule without2.5 mm²plastic sleeve max.0.25 mm²Conductor cross section flexible, with ferrule with plasticsleeve min.2.5 mm²Conductor cross section flexible, with ferrule with plasticsleeve max.Conductor cross section AWG/kcmil min. 24Conductor cross section AWG/kcmil max 122 conductors with same cross section, solid min. 0.2 mm²2 conductors with same cross section, solid max. 1 mm²2 conductors with same cross section, flexible, min. 0.2 mm²2 conductors with same cross section, flexible max. 1.5 mm²0.25 mm²2 conductors with same cross section, flexible, ferruleswithout plastic sleeve min.1 mm²2 conductors with same cross section, flexible, ferruleswithout plastic sleeve, max.2 conductors with same cross section, flexible, TWIN0.5 mm²ferrules with plastic sleeve, min.2 conductors with identical cross section, flexible TWIN1.5 mm²ferrules with plastic sleeve, max.CertificatesCSA300 V Nominal voltage UNNominal current I10 ANAWG/kcmil 28-12 CULNominal voltage U300 VN10 A Nominal current INAWG/kcmil 30-12250 V Nominal voltage UNNominal current I10 ANAWG/kcmil 30-12 ULNominal voltage U300 VN10 A Nominal current INAWG/kcmil 30-12250 V Nominal voltage UN10 A Nominal current INAWG/kcmil 30-12Drawings Dimensioned drawingApproval logoAccessoriesItem Designation DescriptionBridges1733172EBP 3- 5Insertion bridge, fully insulated, for plug connectors with 5.0 or5.08 mm pitch, no. of positions: 31733185EBP 4- 5Insertion bridge, fully insulated, for plug connectors with 5.0 or5.08 mm pitch, no. of positions: 41733198EBP 5- 5Insertion bridge, fully insulated, for plug connectors with 5.0 or5.08 mm pitch, no. of positions: 51733208EBP 6- 5Insertion bridge, fully insulated, for plug connectors with 5.0 or5.08 mm pitch, no. of positions: 6General1733169EBP 2- 5Insertion bridge, fully insulated, for plug connectors with 5.0 or5.08 mm pitch, no. of positions: 21783740KGS-MSTB 2,5/10Cable housing, for cable diameters of 6 - 13.5 mm, marker stripsand transparent label carrier are included, color: green, no. ofpositions: 10Marking1051993B-STIFT Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm0805108SK 5,08/2,8:SO Marker card, self-adhesive, marking according to customerrequirements0804293SK 5,08/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocks0803883SK U/2,8 WH:UNBEDRUCKT Unprinted marker cards, DIN A4 format, pitch as desired, self-adhesive, with 50 stamped marker strips, 185 mm strip length,can be labeled with the CMS system or manually with the M-PENPlug/Adapter1734634CP-MSTB Coding section, is inserted into the slot on the plug or invertedheader, red insulating materialTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalAdditional productsItem Designation DescriptionGeneral1823927ICC 2,5/10-STZ-5,08Plug component, nominal current: 12 A, rated voltage: 250 V,pitch: 5.08 mm, no. of positions: 10, type of connection: Crimpconnection1762457MDSTB 2,5/10-G1-5,08Header, nominal current: 10 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 10, mounting: Soldering1762583MDSTBV 2,5/10-G1-5,08Header, nominal current: 10 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 10, mounting: Soldering1770795MSTB 2,5/10-G-5,08-LA Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 10, mounting: Soldering1757323MSTBA 2,5/10-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 10, mounting: Soldering1768024MSTBA 2,5/10-G-5,08-LA Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 10, mounting: Soldering1765030MSTBHK 2,5/10-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 10, mounting: Mounting rail1788800MSTBVK 2,5/10-G-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 10, mounting: Mounting rail1788619MVSTBU 2,5/10-GB-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 10, mounting: Direct mounting1769544SMSTB 2,5/10-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 10, mounting: Soldering1767452SMSTBA 2,5/10-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 10, mounting: Soldering3002034UK 3-MSTB-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 30 - 12, width: 5.1 mm, color: gray3002076UK 3-MVSTB-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 26 - 12, width: 5.1 mm, color: gray3002102UK 3-MVSTB-5,08-LA 24RD Modular terminal block with plug entry, nominal current: 12 A,rated voltage: 320 V, pitch: 5.08 mm, no. of positions: 1,mounting: mounting rail, with red light indicator, voltage lightindicator: 24 V AC/DC, current light indicator: 3.3 mA3002063UK 3-MVSTB-5,08/EK Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 26 - 12, width: 5.1 mm, color: gray3002131UK 3D-MSTBV-5,08Modular terminal blocks with vertical plug entry, cross section:0.2 - 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color: gray 3002144UK 3D-MSTBV-5,08-LA 24RD Modular terminal block with vertical plug entry, color: Gray, withred light indicator, voltage light indicator: 24 V AC/DC, currentlight indicator: 3.3 mA3002173UK 3D-MSTBV-5,08/EK Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 30 - 12, width: 5.1 mm, color: blue2770888UKK 3-MSTB-5,08Modular terminal blocks with 2 horizontal plug entries, crosssection: 0.2 - 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color: gray 1876615UKK 3-MSTB-5,08-PE Ground terminal block, with 2 horizontal plug entries, nominalcurrent: 12 A, rated voltage: 320 V, pitch: 5.08 mm, no. ofpositions: 1, mounting: mounting rail.2770846UKK 3-MSTBVH-5,08Modular terminal blocks with vertical and horizontal plug entry,cross section: 0.2 - 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color:gray1788198UMSTBVK 2,5/10-G-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 10, mounting: Mounting rail1873016ZFKK 1,5-MSTBV-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 1.5mm², width: 5.1 mm, color: grayAddressPHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 832825 BlombergGermanyPhone +49 5235 3 00Fax +49 5235 3 41200 Phoenix ContactTechnical modifications reserved;。

1.6 / 5.6
MECHANICAL Withdrawal force inner female contact Withdrawal force inner male contact Insertion force between jacks and plugs Withdrawal force between jacks and plugs Materials
元器件交易网
RF Coaxial Connectors
Introduction
The ITT Cannon range of 1.6/5.6 Connectors are suitable for use in 75 ohm communication systems. These connectors have become the recognised standard in telecommunication systems in many parts of the world. Designed to meet the requirements of DIN 47295, CECC 22240 and IEC 169-13, these connectors feature screw couplings to ensure mating integrity and snap coupling for ease of connection and disconnection (New Push-Pull coupling will be introduced in 1996). The range of parts shown in this publication includes plug and jack connectors for a variety of cables, together with PCB styles and U links. Other cable types and connector styles may be available on request.