JQ104EAS100aR中文资料

IDEAL-100型紫别传感器利用说明书中外合伙淄博爱迪尔测控技术尊重的用户：十分感激您利用我公司生产的产品。

利用本产品前请认真阅读这些说明。

本说明书中描述的产品只能适合通过培训合格的工作者利用。

本产品的调整、修理和保护必需由厂商指定的授权人员进行。

为正确及平安利用本产品，需要依照本说明书进行操作。

厂商建议维持产品标签完整。

厂商建议不要拆开本产品。

厂商建议本产品的所有保护和校准操作需要依照利用说明书中的要求进行。

厂商不对由于利用产品不妥造成的损害或损害承担任何责任。

厂商改良产品规格或修改说明书中的内容，恕不另行通知。

若是需要最新的产品规格或利用说明书，请及时与经销商或厂家联系。

咱们会尽可能完善本说明书以保证其内容的准确性。

若是您在本说明书中发觉任何错误，请同咱们联系，咱们表示超级感激。

未经我公司许诺，严禁拷贝和仿造本说明书全数或部份内容，违者必究。

本利用说明书包括紫别传感器的结构说明、功能介绍、接线方式和操作说明和注意事项。

为了保证正确利用本仪器，请您在利用以前详细阅读本说明书，并把其保留在平安方便的地址以便于显现问题时迅速查找。

目录一、二、三、四、五、一、产品概述小型紫别传感器要紧用于臭氧发生器出口臭氧浓度检测，采纳紫外灯管为光源系统，利用寿命是3万个小时以上，测量数据稳固、精度高；采纳仿造广州立美光池结构，具有无泄漏、耐压高、耐大流量采样气体冲击、易清洁、保护方便、操作简单。

在利用进程中设备手动校零，保证了浓度的准确性而且幸免了零漂，具有4-20mA及RS-485信号输出。

小型紫别传感器是光电转换检测技术具体应用的高新技术产物。

采纳了先进的微处置器操纵技术，长寿命脉冲方式光源，利用臭氧对紫外光特点吸收的特性，依据比尔—郎伯（Beer-Lambert ）定律设计的紫别传感器。

具有设计寿命长；数据稳固精度高；利用、保护方便、操作简单等特点。

臭氧是一种强氧化剂，具有很强的杀菌消毒、漂白、除味等特性，普遍应用于水消毒、食物加工杀菌净化、食物贮藏保鲜、医疗卫生和家庭消毒净化等方面的产品。

The Beam Remote Satellite Terminal RST100 provides reliable and convenient global telecommunications access voice, data & messaging services via the Iridium satellite network.By using the add on TrackALERT terminal enables the Beam Remote Satellite terminal to support a Ship Security Alert System (SSAS) along with tracking and monitoring applications.For years the maritime market has been the largest user of satellite communications and today is no exception. In providing alert, monitoring and tracking solution access to a high quality communication service is essential to maritime users all over the world.Beam provides solutions for the following key maritime applications;• Voice calling • Data services • Crew calling • Alert Systems • Tracking / MonitoringIridium Satellite SystemIridium is the only provider of truly global satellite voice and data solutions with complete coverage of the earth. Iridium delivers essential communications services to and from remote areas where no other form of communication is available.The Iridium system is the largest fully meshed satellite network constellation in the world and consists of 66 low-earth orbiting (LEO), cross-linked satellites and has multiple in-orbit sparesShip Security Alert System2/6 mandated SSAS regulations.Requirementsare as follows;• Covert alert notification• No physical signs of alert raised • At least 2 alert buttons • Full test of the system• Notification to multiple parties • Alert to specify ship details • Alert to specify location data • System cannot be locally reset •Continuous alerting until resetCost Benefitsspecifically for the SSAS system.Key Features & Benefits• Fully compliant with Solas XI-2/6 • Simple installation / configuration • Global access pole to pole • Local & Remote configuration • Remote Diagnostics & testing • Passcode protected• Support multiple alert buttons • Support simultaneous tracking • Multiple alert notifications • Can support Ships NMEA feed • Support separate GPS antenna • No additional monthly feesAlert Systems ApplicationsAs the TrackALERT input is designed to provide support for multiple applications, it is possible to also combine the tracking and reporting functionality with an emergency alert system.The TrackALERT interface can handle multiple alarm activation points. These activation points can be from physical buttons or digital /analog inputs.Secure Alert ResetThe TrackALERT terminal is programmed to have a security Passcode. Once this is set this is the only way an alert can be deactivated. This can be performed locally or remotely using SMS commands.Alert NotificationWhen an alarm is raised this will automatically generate the delivery of an alert notification to the predetermined destination. This delivery destination can be to another Iridium service, another mobile service (Selected Service Providers) or to any email address as specified. RST100 –Alert & Tracking SolutionsSSAS_TRACK_0608Alert PriorityWhilst Beam gives you the flexibility to use the Remote Satellite Terminal for other Iridium Services, in the event of an emergency, the Beam terminal intelligence will always give priority to alerts and terminate any active Voice or Data calls in order to transmit the SSAS alert notification when used with the Beam RST100System TestingThe TrackALERT system can be easily tested locally or remotely. The test enables a full test of the security system including the real alert buttons and delivery notification protocols, whilst not sending alerts to the Emergency Response centre.Tracking ApplicationsThe TrackALERT interface provides an intelligent vessel tracking interface and enables you to configure individual reporting fields such as long/lat/speed/direction/height as well as the status of alarms or other digital / analog inputs as configured on the terminal.Movement ReportingFor tracking applications the intelligent system also allows the unit to be configured so that position reports are only sent when the vessel is moving; this is a great cost saving measure. However, at anytime the unit can still be remotely polled for a current position as required.InstallationThe TrackALERT terminal can be easily installed either as a standalone terminal connected to the communication device or in the case when used with the RST100 it can be simply joined to the main interface using the mounting brackets.The TrackALERT InterfaceThe Beam TrackALERT, alert and monitoring interface, delivers a highly intelligent tracking, monitoring and alert system for various applications.Specifically the interface supports the Ship Security Alert System (SSAS) and enables anyone to easily and covertly transmit an emergency distress signal to the ship owner and any nominated Authority.intelligent voice, data and tracking solution using the Beam Remote Satellite Terminal RST100.Intelligent Configurationprocessor onboard the terminal. settings, notification addresses, notification intervals, loop configuration, remote control as well as remote polling when required. All parameters can be configured remotely via SMS and retrieved by either SMS or SBD.Inbuilt GPSGPS antenna. The terminal will also take a GPS input from any NMEA feed.inputs.GPS Antenna Optionsinterface units.SSAS & TrackALERT Features•Supports multiple GPS inputs • Active GPS antenna •Ships NMEA inputMultiple notification methods• SMS • Short Burst Data (SBD) • SBD to 5 email addresses •SMS to emailSSAS / Equipment test•Full Test Remote or Local •Configurable delivery adviceIntelligent Tracking• Remote Polling on Demand• Periodic Transmission •Movement ActivatedIntelligent Processor• Fully configurable • GPS signal monitoring • Remote test of SSAS • Remote software download •SMS confirmationConfigurable Settings• SSAS Information • Alert notification•Remote or local alert resetLED Status•GPS signal•Power / AntennaIntelligent alarm buttons• 4 Individual loops• Used for Alarm/ Monitoring • Multiple buttons per loop • Up to 500m cable lengthTechnical SpecificationsPower SpecificationsPhysical Specifications Unit only Packed Power input voltage DC 7.5 V DCDimensions - mm 110 x 225 x 45 300 x 283 x 63 Powered from RST100 TerminalDimensions - inches 4.3 x 8.8 x 1.712.9 x 11.1 x 2.4Power ConsumptionWeight - kg 0.8 1.1 @ 7.5V DC200mA1.5WWeight - lbs1.72.4Environment Specifications SSAS SpecificationTemperature Degrees ˚C Degrees ˚F Supports multiple alarm inputs Operating Range -15 to +55 +5 to +131 GPS Storage -30 to +70 -22 to 158 GPS - Inbuilt Garmin GPS module Humidity 93% non condensing GPS - Support external NMEA feed Vibration 2 Hz - 13.2 Hz & 13.2 Hx - 100 hzMessage delivery via SBD or SMS Corrosion Remote or local system test40 ˚C with 90% - 95% relative humidity after 2h salt sprayPasscode protectedConnectors / Interfaces CertificationLog Port RS232 Serial Interface Germanischer Lloyd Connection to RST100 RS232 Serial Interface American Bureau of Shipping Serial Data Port NMEA RS232 Serial Interface RTTEGPS Antenna SMA United States Coast Guard Antenna Selection Not Used IEC6045 including Vibration/Corrosion Loops 1,2,3 & 4 4-way Terminal Block C tick Analog Output 6-way Terminal Block CE Compliance Kit Contents LED / Display RST030 Main terminal Power Green Serial data cable to connect to RST100 GPS Antenna Data Red / Green Mounting Brackets Serial NMEA Data Green SSAS Software AccessoriesBeam Management System - Configuration software GPS Antenna - Mast Mount RST909 User & Installation Manual GPS Antenna - Patch mountRST901 CD - Beam Management System, AT Commands, Manuals Dual Mode Iridium Helix / GPS Patch antenna RST902 GPS Antenna Cable - 6m / 18' RST942 GPS Antenna Cable - 30m / 90' RST941Ease of UseThe Beam equipment provides the ability Intelligent Handset InterfaceThe optional Intelligentvoice and SMSThe handset is compact,hang-up cup and inbuiltringer. The unit supportsfull SMS functionality aswell as an easy menusystem to access phoneWith Iridium prepaid services, users have a cost-effective communications system at their fingertips, eliminating the headaches of monthly bills or subscription fees. Unused minutes carry forward so your minutes can be used in future months. Prepaid SIM’s are ideal for situations withData & Messaging Service (SMS)The Iridium SMS can send and receiveBeam Communications Pty Ltd 8 Anzed Court, Mulgrave, Victoria Australia 3170T: +61 3 9560 9999 F: +61 3 9560 9055E:*********************Technical SpecificationsIridium NetworkSatellite Constellation L-Band transceiver frequency 1616 - 1625 MHz Intersatellite Links 23.18-23.38 GHz, Ka-band Compressed Data2.4 kbps Ground Segment Links Voice / data modulation 10 - 12 kbps Downlinks19.4-19.6 GHz, Ka-bandUplinks29.1-29.3 GHz, Ka-band RST100 - Remote Satellite TerminalPower Specifications Physical Specifications Unit only Packed Power input voltage 11 - 32 V DC Dimensions - mm 225 x 271 x 45 400 x 325 x 90 Power Consumption ( AMPS ) 12 V DC 24 V DC Dimensions - inches 8.8 x 10.6 x 1.215.7 x 12.8 x 3.5Stand-by 0.35 0.16 Weight - kg 2.25 3.25 Transmit 0.51 0.25 Weight - lbs 4.9 7.1 Stand-by - inc handset 0.47 0.22Transmit - inc handset 0.59 0.29 Environment Specifications Certifications Temperature Degrees ˚C Degrees ˚F IEC60945 Operating Range -15 to +55 +5 to +131 Germanischer Lloyd Storage -30 to +70 -22 to 158 American bureau of Shipping Humidity 93% non condensing electrical Safety Vibration 2 Hz - 13.2 Hz & 13.2 Hx - 100 hz EMC ComplianceCorrosion 40 ˚C with 90% - 95% relative humidity after 2h salt sprayConnectors / Interfaces LED / DisplayIntelligent Handset RJ45 DPL BUS Power Green Telephone / POTS RJ-11 2 -wire / TN12 or 600Ω Signal 3 Colour Data Port RS232 Serial Interface Call Yellow Log Port RS232 Serial Interface Voicemail Green Power 2 Pin screw type Kit Contents AccessoriesRST100 Main terminal Mast mount antenna RST910 Mounting Brackets Intelligent handset RST970 AC 110/240V Plug Pack TrackALERT- SSAS Unit RST030 DC 1.5m Power Cable 6 m / 18 f RST932 Data Cable 9 m / 27 f RST930 User & Installation Manual 12 m / 36 f RST933 CD - Beam Management System, AT Commands, Manuals SSAS / TrackALERT RST030 External ringer / alarm RST952。

电子称重仪表XK3101E(CANopen)说明书2011年7月版●使用前请仔细阅读本产品说明书●请妥善保管本产品说明书，以备查阅宁波柯力电气制造有限公司目录1概述简介Xk3101E称重仪表显是一种多用途称重显示器。

它适用于一般工业及商业用途的台秤、容器秤。

主要特点1、可用于电阻应变式测力与称重传感器；2、可设置4种峰值测量模式3、选用6位LED数码管显示，字高14.5mm；4、可选择显示毛重及净重；5、可选用如下不同的分度间距：1，2，5，10，20或50；6、可选择3个小数点位置；7、自动零位跟踪；8、轻触式按键自动去皮；9、采用Δ-Σ方法的ADC，分辨率24位；10、采样速度每秒100次；11、上电源时具有自我诊断及配置显示功能；12、提供上位机软件功能设定接口；提供上位机软件标定接口；13、外部输入可设定作为保护参数设定和标定的开关；14、标配高低限输出接口（四路光耦输出，耐压80VDC，300mA）；比较周期可设定,最快100次/秒；15、标配大屏幕显示器电流环接口16、按键调整模拟量输出（选配模拟输出板时）；模拟量输出更新速度可设置，最快100次/秒：17、标配接口板：CAN输出接口；18、选配4-20mA或0-10V模拟输出板；显示器外形尺寸（mm）48×96×162推荐控制柜开孔尺寸：最小46×93mm产品自重（kg）：约2、技术规格一般规格1、电源：交流电110V，220V±10%、50/60Hz（出厂前指定）2、消耗功率：小于6瓦3、工作温度：-5℃到50℃4、湿度：小于85%相对湿度（无凝结水）数字部份1、数字显示：6位LED数码管2、数字高度：14.5mm3、指示灯：毛重，净重，零位，重量变动及重量单位（公斤或吨）4、超载显示：显示“”5、显示分度间距：1，2，5，10，20，或506、小数点位置：可选择3个不同位置模拟部份1、适用传感器类型：适用于所有电阻应变式测力与称重传感器2、传感器输入电压：直流电10V±5%，最多可供电150毫安3、分度值：μV/e4、零位电压范围：±15毫伏5、采样速率：每秒100次CAN输出接口CAN高速，支持10kbps~1Mbps的总线速度。