华仁药业：关于持股5%以上股东股份被司法冻结的公告

Installation Guide2. Grasp the sides of the module and pull it straight forward out of the slot.AGM731F and AGM732FThe 1000Base-X SFP transceiver module provides full-duplex 1000Mbps Ethernet operation in each direction for NETGEAR managed switches.The switch automatically detects the module, so you can simply plug it into an available module slot.StandardsAGM731F: IEEE 802.3z, 1000Base-SX AGM732F: IEEE 802.3z, 1000Base-LXConnectorsAGM731F: LC for 62.5/125µm or 50/125µm cable AGM732F: LC for 9/125µm cableDimensions (H x W x D)AGM731F: 2.23 x 0.53 x 0.34 in (56.8 x 13.6 x 8.6 mm)AGM732F: 2.26 x 0.53 x 0.33 in (57.4 x 13.4 x 8.5 mm)WeightAGM731F: 0.58 oz (16.3 g)AGM732F: 0.56 oz (16.0 g)Storage temperature –40–185ºF (–40–85ºC)Case operating temperature23–158ºF (–5–70ºC)Operative relative humidity85% at 77ºF (25ºC)Operating distance multi-mode fiber (MMF)AGM731F:OM1: 900 ft (275 m)OM2: 900–1,800 ft (275–550 m)OM3: 1,800 ft (550 m)Operating distance single mode fiber (SMF)AGM732F: 6 mi (10 km)Power consumption 1.1WMTBFAGM731F: >10 years AGM732F: >10 yearsSafety certification UL 60950-1, CSA-C22.2 No.60950-1Environmental complianceRoHSNETGEAR, Inc.350 East Plumeria Drive San Jose, CA 95134, USA NETGEAR INTERNATIONAL LTD Floor 1, Building 3University Technology Centre Curraheen Road, Cork,T12EF21, Ireland© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.Support and CommunityVisit /support to get your questions answered and access the latest downloads.You can also check out our NETGEAR Community for helpful advice at.Regulatory and LegalSi ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https:///support/download/.(If this product is sold in Canada, you can access this document in Canadian French at https:///support/download/.)For regulatory compliance information including the EU Declaration of Conformity, visit https:///about/regulatory/.See the regulatory compliance document before connecting the power supply.For NETGEAR’s Privacy Policy, visit https:///about/privacy-policy.By using this device, you are agreeing to NETGEAR’s Terms and Conditions athttps:///about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.Do not use this device outdoors.Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.June 2022。

联盟名字大全1、丿oO飚风oO丨联盟2、卩s丶惶族丨灬3、丨雄霸灬天下丨4、Noble灬顶峰GT5、牵绊丶颗心6、丶巛劳资明星灬7、萧兮。

家族8、☆壹辈孑灬镓镞9、S丶ky丿神之队10、流光夏央11、丨极速灬巅峰彡丨12、帅死的骆驼13、aT丨丶盛世集团14、丿angel丿灬战队15、可愛小女人16、A丶Killer丨Club17、炫靓メ〓征戦18、死神顶级集团19、河南n皇上皇n炫队20、宠坏灬恋丨炫之队21、丿完美丶家族灬22、冰灵ル23、战魔の不灭24、巛丨资本总部丨灬25、新秀家族26、狂神战天27、￡染红了↘地图彡28、灬丨葫芦娃丨灬29、灬Cherish丨丶嗳30、崬苝¨競技拹浍31、圣灵玫瑰灬梦之队32、丶巛唯你专属灬33、灬cherish丨丶嗳34、东北灬将军VS战团35、姐统领守护36、巛邪恶丨灬皇朝37、ii丶Fire艹灬永远38、New丶族灬家族39、火花梦之家族40、ｌǐｎ﹎唸﹖l灬圣灵族41、斬殺上蒂42、落雪听梅43、Lucky丶睹少44、Star丶Drifts家族45、丶嗨灬丨慢摇46、丿Sky灬丨丶皇族47、时尚潮流馆48、爱有你就↘好49、が爵④家族50、丿有你玩转灬爱情51、夜风海之恋52、丿浪漫丨个性BabY53、寂静唔云54、么死不后悔团55、丿名人堂丶炫队56、Top丨娱乐战队丶57、S丶ky丿神之队58、╅悲杀の部落59、丨m灬丶战队60、沧州地狱战神61、js灬丶丨铱埘绱丨62、重新演绎63、丿刀丶灬锋64、丨男佐女佑丨65、mua丨琚點丶傢族66、灬粉蕾丝灬67、?J风轻☆云淡☆68、爱你是我瞎了眼69、卩丶幻城灬帝国70、ら魔粉の晓涛71、流灬氓丿集团72、穷人灬家族73、_影丿战魂74、『隔屏￠相望』75、卩丶顶尖灬红入馆76、≮弑神☆孤独≯77、风醉78、边境ご炫队79、血丶妖精80、豪门★贵族81、丿贵族灬俱乐部丶82、蓝血族家族83、丶巛劳资明星灬84、◎吙灬喍◎85、宠坏灬恋丨梦之队86、一半晨光87、Vision丶Team88、丨Yoyo丨team丨89、喵萌萌90、灬傲虎灬家族91、happy急速v梦之队92、雅蠛蝶丶突击队93、丿Bubble丶战队94、t丿黔堂丨丶战队95、丶丿年少灬轻狂刂96、爱的人腰疼97、绿色丶忧伤ぃ98、‖蓝缘メ圣殿‖99、沧州地狱战神100、月缘辉时尚车簇101、十二灬星座102、o泡泡灬心之谷103、精灵飙车族104、夜阑听雪105、大海之中的一条鱼 106、吓败灬神话灬107、卩s灬lies巛团108、up影爱战队109、?J嚣张?I傲气☆ 110、铭华丶族丿主宰111、吹吹冷风112、vip紫炫灬风舞113、灬边境炫队灬114、梦懵女孩儿纸115、★丶卟落战队116、圝◣帝潮◢圝117、丿TK丶灬丨莳绱 118、戲子帝王119、逛嗨の家族120、卩s丶kiss艹皇朝 121、蓝血族家族122、℡殘▂凋蕶╮123、咱丶丿败家协会124、丨贵族丨金牌战队 125、の柔キ126、ご伊泽☆瑞尔☆127、兴城丶神之队128、飞扬跋扈129、?J杀戮☆天地彡130、唯⒈のsē彩131、丨雄霸灬天下丨132、罪丶犯丨世界133、帝国觉醒灬梦之队134、丶丿bw丶神话135、那爱丶狠美丨yEs 136、ge丶隐身青楼137、巛united丶灬team 138、梅寒风独开139、京都灬A家族140、让子弹飞141、【皇道】主盟142、惊世妖娆143、拿幸福开玩笑丶144、Happy急速V梦之队 145、浅笑痕146、?J萨满☆殿下☆147、ˊ冷漠ゞ家族148、VIP皇朝风云149、丿水阳灬乐升战队150、Only灬属于妳151、阝上辈孑灬Team152、嗜血家族153、河南车神灬154、乄残影ゞ社团155、top丨顶尖车队156、丨战狂丨灬霸刀157、逆天的节奏158、丬nicE丶学生会艹 159、卩s丶惶族丨灬160、☆cling家族161、丿CK丶战灬战队 162、回味你的浪漫163、■假寐灬丨纪年164、丿兄弟堂丶灬战队 165、夲菈簦_╱丨极限 166、〖ゞ①苆ㄨ隨缘〗 167、丿Home丶浅夏灬 168、丨DGL丨梦之战队 169、◇很紧の幸福170、巛天堂圣手灬E族 171、fr娇柔壹队172、光之翼族173、美丽的泪光174、丿伊甸园灬卡门175、终极PK联盟176、破坏者海盗团177、幻想客178、蓝狼vvv站队179、紫金之巅‖〓上帝禁区〓‖ 180、老衲法号施暴181、蒛德⒐埘緔182、聖劍ㄨ权倾183、丿LoVe丶丨家族灬184、厌世|▍灬club185、丿king丨灬皇朝186、夜风海之恋187、丿惜缘灬战队188、无敌宝宝男189、◆ares丨灬丶车队190、梦幻之後起新show191、tl通辽战队tl192、风欲静云193、孤独的飙车一族194、丶丿BW丶神话195、【丿彩丨家族】196、丶Mx灬神话丶天下 197、唯爱ぺ灬babyル198、玫瑰之吻彡199、被自己萌哭了200、丿bubble丶车队201、丶丿年少灬轻狂刂 202、上帝也漂移203、丿Ange磊灬204、丶丿bw丶神话205、顽固不化丶206、丿情缘彡恋灬207、河南n皇上皇n炫队 208、阝灬太阳雨丨战队 209、Ｃρ校园家族210、灬呦儿园ミ211、无敌勇猛家族212、恋夏丨眠彡绝恋213、丶Angle丨Team 214、丨飞车灬集团丨215、风雪划过216、丿风尘丶丨灬男孓 217、單恋１根草ヽ218、SunLife灬丿缘噬219、低调灬炫丨家族220、神魔领域221、卩s帝王灬战队222、~狼┭赱吻?223、搁浅爱灬传奇战队224、丶巛night灬丨tem 225、暒魅★①族226、坐看风云起227、丨聚义堂丨灬神话228、丨至尊丶情侣灬丨229、no灬free丨自由230、神马是丿浮云丶231、毒°toxic≒灬壹队 232、南骚北浪233、火花梦之家族234、丶巛Wonder灬嗳家235、丿death丨丶车队236、丨雄霸灬天下丨237、丿情缘彡恋灬238、丨Vampire丶永恒239、丿刀丶灬锋艹240、s丶ky丿神之队241、Q皇家X贵族Q242、好在ぁ一族243、丿夯族灬狠爱244、丿Monster卩s冥彡 245、灬丨辉煌王朝丨灬 246、┾恋戦℃ャ逍遥247、那夜丶家族248、传说中的兄弟灬249、sunlife丨路氏250、倾此生为伊人251、丨晨曦丨灬战队252、丨Team丶舞灬星辰 253、艳娓家族254、Star丶Drifts家族 255、至尊邱氏家簇站队 256、丶丿BW丶神话257、巛柒彩丨战堂灬258、帝国觉醒灬梦之队 259、Devil丶Club260、彡炫灬月影萧梦灬 261、ㄣ精英会メ262、e丶s新势力263、丿虚丨灬十刃264、胯下有奇迹265、spurt丶俱乐部266、卩爷灬日不落巛 267、皇上皇灬丿战队 268、孤魂269、v丶show丨概念 270、流灬氓丿集团271、风云ㄋ战焰272、God灬亓巛家族273、厮守╮心控／274、丿刀丶灬锋艹275、幻城灬帝国276、丶巛赞丶美b灬 277、帅的海枯石烂278、丶巛炫丶请深爱灬 279、精灵飙车族280、丶◆年少灬轻狂刂 281、丿灬弑念丶家族 282、Vip精英联盟总队 283、丿星座灬天堂彡284、丿VIP灬丨家族丶 285、☆Star炫Love绿茶 286、火花★之炫287、Sos丿灬男子噤区 288、丨JIL丨战队289、fr娇柔壹队290、m-新势力291、丿永灬恒丨国度292、死人無需牽掛293、‖名門メ世家‖294、丿漂神灬魔鬼车队 295、夏初淂羙296、丿sa灬羽化恋佳297、傲世ㄨ情谊君少298、丿HZ西湖灬战队299、丨虚夜宫灬神起丿 300、丨jil丨车队301、丿丶渔美人灬钕子 302、丿灬黑道丨学生丶 303、★北极殿战队★304、圣灵玫瑰灬梦之队 305、丶丨欧洲丿之星306、丿kiss丶灬丨绝恋307、丿legend灬车队队308、〆铭记ゞ家族309、丨限量男女灬情队310、咱丶一家人311、河南车神灬312、轩丨SOP丨灬家族313、拉登◆基地314、雾已泪聚315、巛浅笑丶这殇情灬316、巛赞丶美b317、霍格沃兹战队318、顽主丶家族319、卩丶顶尖灬红入馆320、speed光速波之队321、弑神自封322、一群很ｏｋ的男女323、nc脑残丨联盟324、龙城花苑325、横枪毙首326、╱轩辕譹冂oоο 327、廾丨Wudi灬双胞胎328、灵魂爱人329、战无不胜330、蓝血族家族331、炫恋╭ァ族部332、姐涩鲜花。

非主流家族名字非主流是一个汉语词汇，拼音是fēi zhǔ liú。

指一切和当时“主流”相对的观念、行为、以及因此产生改变的事物。

这是因多元价值理念兴起，人基于追求个性自我彰显的结果。

这是一种社会现象。

每个人都曾经有过非主流的时候，现在回想起来觉得好傻，但是在那个时候觉得自己超酷，仿佛自己就是整条街最靓的仔，小编汇总了一下非主流家族名字（精选425个）。

1、丿Van灬傀儡2、爱心家族3、精灵飙车族4、丿王氏灬贵族丨5、丿LoVe丶丨家族灬6、灬粉蕾丝灬7、Happy急速V梦之队8、偏爱有恃无恐家族9、雅典娜丿灬神话10、私爱家族11、旧街浪人家族12、Vip皇家贵族家族13、传说中的兄弟灬14、No灬Free丨自由15、刺青家族16、卩s灬Lies巛团17、Lucky一镜Ai薇18、缔造神话灬丨网通19、丶Angle丨Team20、TL通辽家族TL21、梦幻之后起新SHOW22、X非主流Free家族23、神堂丨灬艹鸳鸯战24、只爲等你家族25、振直家族26、咱丶一家人27、繁华落幕家族28、嶶笶家族29、卩丶圣域丨神话30、丿灬蔽日丨家族31、丿龙氏丨灬殇爷32、沪于天下33、夜风海之恋34、卩丶圣域丨神话35、青楼情丿战团36、後徕家族37、雪之HAPPY家族38、花冢家族39、吵赢感情家族40、负势家族41、丿丶渔美人灬钕子42、网游之神顶集集团43、丨聚义堂丨灬神话44、SunLife灬丿缘噬45、原地不動家族46、TL通辽家族TL47、Oo绝恋Oo之梦Oo48、New丶族灬家族49、卩s绝影灬家族彡50、New丶族灬家族51、河南n皇上皇n炫队52、乖乖灬NB丨家族53、卩丶铁铁灬俱乐部54、穷人灬家族55、相顾无言家族56、元徽家族57、丿星座灬天堂彡58、卩灬左手vs右手59、卩丶铁铁灬俱乐部60、眉黛家族61、不忘初心家族62、卩s丶惶族丨灬63、剑魁家族64、丿至尊丶帝王丨65、北柠家族66、Star丶Drifts家族67、丿Somnus丨灬家族68、晴空家族69、Dveil暗影魔70、乖乖灬NB丨家族71、丿惜缘灬家族72、轩丨SOP丨灬家族73、你模仿不起家族ツ74、雪花飘飘的天空75、丶巛赞丶美B灬76、丿灬蔽日丨家族77、想赢就别喊停家族78、等风也等你家族79、丿冥灬神界丶家族80、℉幻影家族81、初晴家族82、丿LoVe丶丨家族灬83、丿Monster卩s冥彡84、专属o丶宁丨亮85、九刺家族86、丨Ace丶Team丨87、哥特金属玫瑰家族88、巛united丶灬Team89、天神家族90、qq家族群名称大全可爱唯美91、沈丨阳丶家族92、我怕帅哭你家族93、菖蒲家族94、帝国觉醒灬梦之队95、时光滥好人家族96、不要活给别人看家族97、雄霸天下疯狂家族98、傻完了家族ツ99、丿丶Dream灬Team 100、仙聚王者贵族101、挫折是祝福家族102、丿至尊丶帝王丨103、沐语家族104、丿虚丨灬十刃105、彡Air丨家族灬106、三爷家族107、亡梦家族108、蓝血族家族109、白龙家族110、皓龙家族111、嗜月家族112、℉至少我还有梦家族113、Strength - 家族114、〃丿龙氏丨灬殇爷115、〃丿Star炫Love绿茶116、〃火花梦之家族117、〃Q皇家X贵族Q 118、鈴藍ゞ家族119、〃葬爱丿皇朝灬家族120、〃焦点丶nán囡灬Club 121、▍Tremere族▍122、〃卩丶圣域丨神话123、〃Ｌｕ＂４集团124、Hz◇‘頂极战队125、〃卩s丶KiSs艹皇朝126、〃丿神祈灬丨狂想曲127、〃丨辈子二人彡个字128、〃k纯丨灬贵族129、雄霸天下疯狂家族130、〃丿有nǐ玩转灬爱情131、〃T丿黔堂丨丶家族132、〃Dveil暗影魔133、〃缔造神话灬丨网通134、〃丨Vampire丶永恒135、韩拭‖久酷ヽ家族136、〃蓝色激浪137、〃丿冥灬神界丶家族138、〃卩丶幻城灬帝国139、魅城丶魅家140、灵秀．家族141、〃丿杀手丨炫丶142、〃丿完美丶家族灬143、kingメ紅秂の堂144、〃丿灬嗨药不败丶145、〃No灬Free丨自由146、〃丿Legend丨灬家族147、〃X非主流Free家族148、〓洛雨◇晴缘〓149、〃丿Sakura灬皇家150、〃SunLife灬丿缘噬151、〃挚爱丨KillerClub 152、ヤ灬单身部落153、〃韩国首尔家族154、﹏冷宫゛冷家155、〃火箭156、〖覇愾〗联盟157、〃丿风尘丶丨灬nán孓158、∨酷∝家族159、〃卩s绝影灬家族彡160、〃Charm丨灬梦之队161、〃卩灬左手vs右手163、〃卡哇伊丨灬部落164、〃Beyond丨极限165、〃灬Ray丿糖果丶团166、〃卩丶铁铁灬俱乐部167、゛Trist爱家168、★舞魅╃貴鏃169、中国茗家170、‖铭门貴蔟‖171、玉树キ林枫172、〃丿丶Dream灬Team 173、〃丿至尊丶帝王丨174、〃Storm风灬晨曦灬175、〃河南n皇上皇n炫队176、中國格調．集团177、『妖炫』家族178、ゞ弑神乄巅锋179、〓傲视※人间〓180、〃彡sweet丶俱乐部181、〃Happy急速V梦之队182、〃沈丨阳丶家族183、〃丨自由丨家族184、〃Vip紫炫灬风舞185、〃龙鹤飞行灬梦之队186、〃穷人灬家族187、〃卩s灬Lies巛团188、〃火暴零八激情站队189、〃罪丶犯丨世界190、〃Faly丨灬黯舞191、〃沪于天下192、鬼魅style家族193、〃丨聚义堂丨灬神话194、〃帝国觉醒灬梦之队195、鈴藍ゞ家族196、非主流家族197、〃天神家族198、★亲王ホ家族199、〃丿星座灬天堂彡200、〃传说中的.兄弟灬201、〃Mua丨据点丶家族202、〃轩丨SOP丨灬家族203、〃Ts灬专属丨nán囡205、〃One丶Piece丿R 206、≮單身∮會所≯207、メ少杆族208、〃丿Sa灬羽化恋佳209、※豪杰メ洫统※210、〃e丿Shine丨NO丶211、〃巛邪恶丨灬皇朝212、〃丿oO飚风oO丨家族213、〃上帝也漂移214、〃神堂丨灬艹鸳鸯战215、〃巛浅笑丶这殇情灬216、〃皇室贵族217、〃东北灬将军VS战团218、じ溡緔╄炫镁族219、〃沧州地狱战神220、〃灬边境炫队灬221、〆. 心淡了222、。

纳米注塑外壳的五涂五烤工艺涂料应用：应用于纳米注塑成型的手机外壳表面，对其进行5层涂装处理，改善基材表层外观，延长产品使用寿命，起到保护和装饰基材的作用。

具有：轻、耐高温、美观、金属光泽华丽的性质。

为了使金属和塑料两者都附着上油漆，并且保证颜色的一致性，首先选择了最好的油漆，在基材一层使用特殊的底漆，提高附着力。

然后分别喷涂两次底漆和一次中漆再加上一次PU面漆，每次喷涂后单独烘烤，也就是这样对后盖的五涂五烤工艺处理，保证了手机外壳的品质。

产品特点：具有金属的光泽与触感，性能优异，可通过诸如水煮、耐磨、耐盐雾、抗化学试剂测试。

同时可遮盖注塑所产生的瑕疵，避免出现凹痕。

在最后一层PU漆时使用了哑光，这样一方面使得产品保持时尚度的同时，外观内敛不张扬，另一方面也增加了手机与手之间的摩擦力，大大减少手机手滑的可能性。

一涂：纳米注塑特殊羟基树脂NMT1500产品介绍：NMT1500是一种特殊羟基树脂，应用于纳米注塑成型素材表面，在五涂五烤工艺中作为一涂底漆使用。

解决金属加塑料（铝镁合金加PPS、PBT、PA）表面附着力，具有良好的抗腐蚀耐磨性能、涂厚韧性、耐水煮、附着力佳、低收缩、耐化学性能佳。

应用于纳米注塑成型手机、笔记本、平板电脑外壳底涂，对金属制品附着力优异。

物理性质：外观：淡黄色液体固含：40%羟基：8~20mgHOH/g粘度：25℃X~Z1酸价：2max色素：3.0max玻璃钢化温度：80施工工艺：①工件表面的清洁，②烘烤80℃/h，③喷涂NMT1500树脂（喷涂粘度：7.5"—8.5",喷涂厚度：10μm—15μm，60℃×10—15分钟）二涂：纳米注塑特殊羟基树脂NMT2810产品介绍NMT2810是一种特殊性羟基树脂，用于制作双组份涂料，具有良好的光泽稳定性、抗化学性、易打磨、快干，良好的施工性。

漆膜对底材和面漆具良好的附着力；打磨性好，易遮蔽底材缺陷；封闭底色，使底色不透入面漆中，并保持底色一致；重涂性好，易于修补。

©Mitsubishi ElectricCorporation三菱電機可程式控制器MELSEC iQ-F系列FX5S-30M□/□, FX5S-40M□/□,FX5S-60M□/□©Mitsubishi ElectricCorporation2目次目次1.特點………………………P32.實現IoT………………………P73.國際標準………………………P144.規格………………………P155.產品陣容………………………P21©Mitsubishi Electric Corporation3輕鬆上手，簡單易用紧凑型CPU模組，內藏Ethernet端口。

具有高性價比的MELSEC iQ-F系列不僅簡單易用，基本性能強大，而且機型選擇更簡單、利用更輕鬆。

產品陣容CPU模組繼電器輸出R 電晶體輸出(NPN型)T1電晶體輸出(PNP型)T21.特點FX5-SDCD擴充版SD記憶卡模組(FX5S專用)FX5S-30MT/ESS AC DC T2FX5S-30MT/ES AC DC T1FX5S-30MR/ES AC DC R AC電源AC DC輸入(NPN型/PNP型)DCFX5S-60MT/ESS AC DC T2FX5S-60MT/ES AC DC T1FX5S-60MR/ES AC DC R FX5S-40MT/ESS AC DC T2FX5S-40MT/ES AC DC T1FX5S-40MR/ES AC DC R©Mitsubishi Electric Corporation4便捷功能!指令處理時間(LD、MOV指令)84ns48k步無需電池I/O點數最大80點定位4軸(100kHz)高速計數器8ch 內藏Ethernet，支持CC-Link IE現場網路Basic，強化了與三菱電機FA設備和各合作廠商產品的聯動。

此外，還內藏了可用於編程的USB(Mini-B)連接器。

Naim Audio 名 ND5 XS 2
佚名
【期刊名称】《视听前线》
【年(卷),期】2024()5
【摘要】品牌屹立接近半个世纪的Naim Audio,成立于1973年,由Julian Vereker和Shirley Clarke联合创立,属于英国其中一所最老字号的音响品牌,其产品以浓厚的音乐味和强烈的感染力著称,除了传统合并式及前后级功放之
外,NaimAudio炮制的串流播放机及一体化产品,在世界各地同样深受用家欢迎。

【总页数】2页(P20-21)
【正文语种】中文
【中图分类】TN9
【相关文献】
1.Naim（名）NAIT XS合并式放大器
2.Naim ND5 XS网络音乐播放机
3.Naim Audio——NAIT 5si，NAIT XS2及SUPERNAIT2改良版合并机
4.英国声中的双杰——naim audio·ProAc：体验正宗的英国声把玩naim audio放大器
5.英国Naim Audio(名)ND5 XS 2 串流音乐播放器
因版权原因，仅展示原文概要，查看原文内容请购买。

类别中国美国英国日本法国德国前苏联GB ASTM BS JIS NF DIN ГОСТ工业纯铝1A99 1199 A199.99R A99 1A97 A199.98R A97 1A95 A95 1A80 1080(1A) 1080 1080A A199.90 A8 1A50 1050 1050(1B) 1050 1050A A199.50 A5 防锈铝5A02 5052 NS4 5052 5052 A1Mg2.5 Amg 5A03 NS5 AMg3 5A05 5056 NB6 5056 A1Mg5 AMg5V 5A30 5456 NG61 5556 5957 硬铝2A01 2036 2117 2117 AlCu2.5Mg0.5 D18 2A11 HF15 2017 2017S AlCuMg1 D1 2A12 2124 2024 2024 AlCuMg2 D16AVTV 2B16 2319 锻铝2A80 2N01 AK4 2A90 2218 2018 AK2 2A14 2014 2014 2014 AlCuSiMn AK8 超硬铝7A09 7175 7075 7075 AlZnMgCu1.5 V95P 铸造铝合金ZAlSi7Mn 356.2 LM25 AC4C G-AlSi7Mg ZAlSi12 413.2 LM6 AC3A A-S12-Y4 G-Al12 AL2 ZAlSi5Cu1Mg 355.2 AL5 ZAlSi2Cu2Mg1 413.0 AC8A G-Al12(Cu) ZAlCu5Mn AL19 ZAlCu5MnCdVA 201.0 ZAlMg10 520.2 LM10 AG11 G-AlMg10 AL8 ZAlMg5Si G-AlMg5Si AL13 中、美常用铝合金牌号对照表中国CHINA美国THE UNITED STATESL1-L6 、L5-11070 、1060 、1050 、1030 、1100 LY11 、LY12 、LY12017 、2024 、2117 LD10 、LD52014 、2214LD72618LD9 、LD82018 、2218LY16 、LY172219 、2021LF213003LF2 、LF3 、LF45052 、5154 、5083 LF5 、LF11 、LF6 、LF5-15456 、5056LD2 、LD2-1 、LD2-2 、LD30 、LD316165 、6061 、6055 、6063 LC6 、LC4 、LC97001 、7178 、7075 LC5 、LC107076 、7175 、7079LD114032中国新旧合金牌号对照表（GB/T 3190-1996）新牌号旧牌号新牌号旧牌号新牌号旧牌号1A99 原LG52B12原LY93003－1A97 原LG42A13原LY133103－1A95 －2A14原LD103004－1A93 原LG32A16原LY163005－1A90 原LG22B16曾用Ly16-13105－1A85 原LG12A17原LY17 4A01原LT1 1080 －2A20 曾用LY20 4A11 原LD11 1080A －2A21 曾用214 4A13 原LT13 1070 －2A25 曾用225 4A17 原LT17 1070A 代L1 2A49 曾用149 4004 －1370 －2A50 原LD5 4032 －1060 代L2 2B50 原LD6 4043 －1050 －2A70 原LD7 4043A －1050A 代L3 2B70 曾用LD7－1 4047 －1A50 原LB2 2A80 原LD8 4047A －1350 －2A90 原LD9 5A01 曾用2101、LF15 1145 －2004 －5A02 原LF2 1035 代L4 2011 －5A03 原LF3 1A30 原L4－1 2014 －5A05 原LF5 1100 代LF5－1 2014A －5B05 原LF10 1200 代L5 2214 －5A06 原LF6 1235 －2017 －5B06 原LF14 2A01 原LY1 2017A －5A12 原LF12 2A02 原LY2 2117 －5A13 原LF13 2A04 原LY4 2218 －5A30 曾用2103、LF16 2A06 原LY6 2618 －5A33 原LF33 2A10 原LY10 2219 曾用LY19、147 5A41 原LT41 2A11 原LY11 2024 －5A43 原LF43 2B11 原LY8 2124 －5A66 原LT66 2A12 原LY12 3A21 原LF21 5005 －5019 －6B02 原LD2－1 7A09 原LC9 5050 －6A51 曾用651 7A10 原LC10 5251 －6101 －7A15 曾用LC15、157 5052 －6101A －7A19 曾用919、LC19 5154 －6005 －7A31 曾用183-1 5154A －6005A －7A33 曾用LB733 5454 －6351 －7A52 曾用LC52、5210 5554 －6060 －7003 原LC12 5754 －6061 原LD30 7005 －5056 原LF5－1 6063 原LD31 7020 －5356 －6063A －7022 －5456 －6070 原LD2－2 7050 －5082 －6181 －7075 －5182 －6082 －7475 －5083 原LF4 7A01 原LB1 8A06 原L6 5183 －7A03 原LC3 8011 曾用LT98 5086 －7A04 原LC4 8090 －6A02 原LD2 7A05 曾用705 －－注意：（1）“原”是指化学成分与新牌号等同，且都符合GB3190－82规定的旧牌号。

高中理科物理公式归纳冲量与动量1.动量：p=mv {p:动量kg/s，m:质量kg，v:速度m/s，方向与速度方向相同｝3.冲量：I=Ft {I:冲量N?s，F:恒力N，t:力的作用时间s，方向由F决定｝4.动量定理：I=Δp或Ft=mvt–mv0 {Δp:动量变化Δp=mvt–mv0，是矢量式}5.动量守恒定律：p前总=p后总或p=p’′也可以是m1v1+m2v2=m1v1′+m2v2′6.弹性碰撞：Δp=0;ΔEk=0 {即系统的动量和动能均守恒}7.非弹性碰撞Δp=0;0<ΔEK<ΔEKm {ΔEK：损失的动能，EKm：损失的最大动能}8.完全非弹性碰撞Δp=0;ΔEK=ΔEKm {碰后连在一起成一整体}9.物体m1以v1初速度与静止的物体m2发生弹性正碰: V1′=m1-m2v1/m1+m2v2′=2m1v1/m1+m210.由9得的推论-----等质量弹性正碰时二者交换速度动能守恒、动量守恒11.子弹m水平速度v0射入静止置于水平光滑地面的长木块M，并嵌入其中一起运动时的机械能损失E损=mv02/2-M+mvt2/2=fs相对 {vt:共同速度，f:阻力，s相对子弹相对长木块的位移}功和能1.功：W=Fscosα定义式{W:功J，F:恒力N，s:位移m，α:F、s间的夹角｝2.重力做功：Wab=mghab {m:物体的质量，hab：a与b高度差hab=ha-hb}3.电场力做功：Wab=qUab {q:电量C，�4.电功：W=UIt普适式 {U：电压V，I:电流A，t:通电时间s｝5.功率：P=W/t定义式 {P:功率[瓦W]，W:t时间内所做的功J，t:做功所用时间s｝6.汽车牵引力的功率：P=Fv;P平=Fv平 {P:瞬时功率，P平:平均功率}7.汽车以恒定功率启动变加速、以恒定加速度启动变功率、汽车最大行驶速度vmax=P 额/f8.电功率：P=UI普适式 {U：电路电压V，I：电路电流A｝9.焦耳定律：Q=I2Rt {Q:电热J，I:电流强度A，R:电阻值Ω，t:通电时间s｝10.纯电阻电路中I=U/R;P=UI=U2/R=I2R;Q=W=UIt=U2t/R=I2Rt11.动能：EK=mv2/2 {EK:动能J，m：物体质量kg，v:物体瞬时速度m/s｝12.重力势能：EP=mgh {EP :重力势能J，g:重力加速度，h:竖直高度m从零势能面起｝13.电势能：EA=qφA {EA:带电体在A点的电势能J，q:电量C，φA:A点的电势V从零势能面起｝14.动能定理对物体做正功,物体的动能增加：W合=mvt2/2-mv02/2或W合=ΔEK {W合:外力对物体做的总功，ΔEK:动能变化ΔEK=mvt2/2-mv02/2｝15.机械能守恒定律：ΔE=0或EK1+EP1=EK2+EP2也可以是mv12/2+mgh1=mv22/2+mgh216.重力做功与重力势能的变化重力做功等于物体重力势能增量的负值WG=-ΔEP电场1.两种电荷、电荷守恒定律、元电荷：e=1.60×10-19C;带电体电荷量等于元电荷的整数倍2.库仑定律：F=kQ1Q2/r2在真空中{F:点电荷间的作用力N，k:静电力常量k=9.0×109Nm2/C2，Q1、Q2:两点电荷的电量C，r:两点电荷间的距离m，方向在它们的连线上，作用力与反作用力，同种电荷互相排斥，异种电荷互相吸引｝3.电场强度：E=F/q定义式、计算式{E：电场强度N/C，是矢量电场的叠加原理，q：检验电荷的电量C｝4.真空点源电荷形成的电场E=kQ/r2 {r：源电荷到该位置的距离m，Q：源电荷的电量｝5.匀强电场的场强E=UAB/d {�6.电场力：F=qE {F:电场力N，q:受到电场力的电荷的电量C，E:电场强度N/C｝7.电势与电势差：UAB=φA-φB，UAB=WAB/q=-ΔEAB/q8.电场力做功：WAB=qUAB=Eqd{WAB:带电体由A到B时电场力所做的功J，q:带电量C，UAB:电场中A、B两点间的电势差V电场力做功与路径无关,E:匀强电场强度,d:两点沿场强方向的距离m｝9.电势能：EA=qφA {EA:带电体在A点的电势能J，q:电量C，φA:A点的电势V｝10.电势能的变化ΔEAB=EB-EA {带电体在电场中从A位置到B位置时电势能的差值｝11.电场力做功与电势能变化ΔEAB=-WAB=-QuAb 电势能的增量等于电场力做功的负值12.电容C=Q/U定义式,计算式 {C:电容F，Q:电量C，U:电压两极板电势差V｝13.平行板电容器的电容C=εS/4πkdS:两极板正对面积，d:两极板间的垂直距离，ε：介电常数14.带电粒子在电场中的加速V0=0：W=ΔEK或qU=mVt2/2，Vt=2qU/m1/215.带电粒子沿垂直电场方向以速度V0进入匀强电场时的偏转不考虑重力作用的情况下类平抛运动;垂直电场方向:匀速直线运动L=V0t，平行电场方向:初速度为零的匀加速直线运动d=at2/2，a=F/m=qE/m强调:1两个完全相同的带电金属小球接触时,电量分配规律:原带异种电荷的先中和后平分,原带同种电荷的总量平分;2电场线从正电荷出发终止于负电荷,电场线不相交,切线方向为场强方向,电场线密处场强大,顺着电场线电势越来越低,电场线与等势线垂直;3常见电场的电场线分布要求熟记,见课本。

Operating Instructions and Parts ManualHydraulic Shop PressesModels HP-5A/15A/35AModel HP-35A shownJET427 New Sanford RoadLaVergne, Tennessee 37086Part No. M-331406 Ph.: 800-274-6848Revision C1 09/2014 Copyright © 2014 JET This .pdf document is bookmarked1.0 Warranty and ServiceJET® warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday.Warranty PeriodThe general warranty lasts for the time period specified in the literature included with your product or on the official JET branded website.•JET products carry a limited warranty which varies in duration based upon the product. (See chart below) •Accessories carry a limited warranty of one year from the date of receipt.•Consumable items are defined as expendable parts or accessories expected to become inoperable within a reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects. Who is CoveredThis warranty covers only the initial purchaser of the product from the date of delivery.What is CoveredThis warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance. JET woodworking machinery is designed to be used with Wood. Use of these machines in the processing of metal, plastics, or other materials may void the warranty. The exceptions are acrylics and other natural items that are made specifically for wood turning.Warranty LimitationsWoodworking products with a Five Year Warranty that are used for commercial or industrial purposes default to a Two Year Warranty. Please contact Technical Service at 1-800-274-6846 for further clarification.How to Get Technical SupportPlease contact Technical Service by calling 1-800-274-6846. Please note that you will be asked to provide proof of initial purchase when calling. If a product requires further inspection, the Technical Service representative will explain and assist with any additional action needed.JET has Authorized Service Centers located throughout the United States. For the name of an Authorized Service Center in your area call 1-800-274-6846 or use the Service Center Locator on the JET website.More InformationJET is constantly adding new products. For complete, up-to-date product information, check with your local distributor or visit the JET website.How State Law AppliesThis warranty gives you specific legal rights, subject to applicable state law.Limitations on This WarrantyJET LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.JET SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.JET sells through distributors only. The specifications listed in JET printed materials and on official JET website are given as general information and are not binding. JET reserves the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever. JET® branded products are not sold in Canada by JPW Industries, Inc.Product Listing with Warranty Period90 Days – Parts; Consumable items; Light-Duty Air Tools1 Year – Motors; Machine Accessories; Heavy-Duty Air Tools; Pro-Duty Air Tools2 Year – Metalworking Machinery; Electric Hoists, Electric Hoist Accessories; Woodworking Machinery usedfor industrial or commercial purposes5 Year – Woodworking MachineryLimited Lifetime – JET Parallel clamps; VOLT Series Electric Hoists; Manual Hoists; Manual HoistAccessories; Shop Tools; Warehouse & Dock products; Hand ToolsNOTE: JET is a division of JPW Industries, Inc. References in this document to JET also apply to JPW Industries, Inc., or any of its successors in interest to the JET brand.2.0 Table of ContentsSection Page1.0 Warranty and Service (2)2.0 Table of Contents (3)3.0 Safety warnings (4)4.0 Specifications (5)5.0 Features and Terminology (6)6.0 Assembly (7)7.0 Operation (7)8.0 Maintenance (7)9.0 Replacement Parts (7)9.1.1 HP-5A Head Assembly – Exploded View (8)9.1.2 HP-5A Head Assembly – Parts List (9)9.2.1 HP-5A Frame Assembly – Exploded View (10)9.2.2 HP-5A Frame Assembly – Parts List (11)9.3.1 HP-15A Head Assembly – Exploded View (12)9.3.2 HP-15A Head Assembly – Parts List (13)9.4.1 HP-15A Frame Assembly – Exploded View (15)9.4.2 HP-15A Frame Assembly – Parts List (16)9.5.1 HP-35A Head Assembly – Exploded View (17)9.5.2 HP-35A Head Assembly – Parts List (18)9.6.1 HP-35A Frame Assembly – Exploded View (20)9.6.2 HP-35A Frame Assembly – Parts List (21)3.0 Safety warnings1. Read and understand all safety warnings on the machine and in this manual.2. Replace warning labels if they become obscured or removed.3. This press is designed and intended for use by properly trained and experienced personnel only. If you arenot familiar with the proper and safe operation of a hydraulic press, do not use until proper training and knowledge have been obtained.4. Do not operate this press beyond its rated capacity. Use pressure gauge to determine load.5. This press is designed for pressing, bending, and straightening purposes only.6. Keep hands away from pressing area and pinch points.7. Do not operate this tool while tired or under the influence of drugs, alcohol or any medication.8. Check the press for loose or damaged parts before each operation. Replace damaged parts and tighten allloose bolts before operating. Components are designed to withstand the rated capacity of the press – do not substitute components.9. Make sure workpiece is center-loaded and secure on the bed before pressing.10. Always apply load at center of ram.11. Remove workpiece from table before attempting to raise or lower table.12. Some parts being pressed may have a tendency to be ejected from the press or explode under pressure.Protect yourself accordingly, and do not allow bystanders near the machine.13. Use good quality hydraulic pump oil only. Do not use brake fluid or other improper types.14. Do not use tube extensions on the pump handle.15. Always wear approved safety glasses/face shields and personal safety equipment. (Everyday eyeglassesonly have impact resistant lenses; they are not safety glasses.)16. Failure to comply with these warnings may result in serious injury and/or damage to property.4.0 SpecificationsModel Number .......................................... H P-5A...................................... H P-15A ................................... HP-35A Stock Number .........................................331406....................................... 331416 (331431)Capacity (ton) ....................................................5............................................... 15 .. (35)Ram Diameter (in.) ..................................... 1-3/4.......................................... 2-1/2 . (3)Piston Stroke (in.) ..............................................4.......................................... 4-1/2 ........................................ 4-3/4 Screw Stroke (in.) ..............................................3.......................................... 3-1/8 . (4)Work Table (in.) ...................................19 x 5-1/2............................ 24-3/4 x 7-1/2 .............................. 31 x 10-3/8 Lateral Movement (in.) ...................................NA...................................... 10-3/16 .. (15)Vertical Travel (in.) ................................... 18-3/4...................................... 22-3/16 ...................................... 23-5/8 Base Size (in.) ...................................23-1/2 x 26.......................... 33-7/8 x 29-1/2 ........................ 43-1/2 x 55-1/2 Height (in.) ................................................ 51-1/2............................................... 65 .. (68)Hydraulic oil capacity (mL) ............................216............................................. 553 (1350)Net Weight (lbs.) ...........................................154............................................. 431 (704)The specifications in this manual were current at time of publication, but because of our policy of continuous improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring obligations.5.0 Features and TerminologyFigure 1Model HP-35A shown as representative; other models may vary6.0 AssemblyRefer to Figure 1 for identification.1. Use a lifting device, such as a hoist or forkliftwith straps, to position machine upright.2. Bolt the frame brackets to the main frame withthe provided screws and hex nuts. Fingertighten only.3. The press should be placed within a well-litarea, upon a level floor, preferably concrete.Lower the press onto the floor, allowing it tostabilize on the brackets. Fully tighten the hexnuts on the frame brackets.4. The hex filler plug (see parts breakdown: item#17 for HP-5A; #8A for HP-15A; #8D for HP-35A) was installed for shipping purposes.Remove this and replace it with the providedvented plug.5. Place the end of the pump handle into thehandle socket, and secure it with the screw. 7.0 OperationRefer to Figure 1 for identification.1. Remove all items from bed plates.2. Remove table holding pins. (Support the tableframe on the HP-5A.)3. Raise or lower table frame to desired position,so that when workpiece is mounted, it will beclose to the ram press head.Model HP-5A: Raise or lower table frame byhand.Models HP-15A,-35A: Rotate crank handle toraise or lower table frame.4. Re-insert table holding pins. Pins must be fullyengaged through front and back holes of theframe.5. Place workpiece onto bed plates.Make sure workpiece is center-loaded and secure before pressing, and that table holding pins are properly inserted. Some objects may have a tendency to pop out or explode under pressure. Exercise proper precautions. 6. If desired, slide ram assembly laterally (15-and 35-ton models only) by mounting the handcrank onto the lateral shaft and rotating it. Donot attempt to slide ram during operation.7. The handwheel can be used to rapidly adjustthe ram extension screw into or out of the plunger.Note: The length of ram screw extending outof the piston should be kept as short as possible. Raise the table rather than extendthe screw to its travel limit.8. Close valve by rotating release valve handleclockwise as far as it will turn.9. Pump the handle to lower the ram until itmakes light contact with workpiece. Align theworkpiece to ensure that desired contact pointis directly beneath the press head. Slowly pump handle again until load begins to be applied to workpiece.10. Remove your hand from workpiece area andstep toward the side of the press (do not standdirectly in front of workpiece). Continue slowlypumping to complete the operation.11. When operation is complete, slowly retract ramby incrementally turning release valve handlecounter-clockwise.8.0 Maintenance•Keep the press clean, and periodically lubricate joints and moving parts with light oil. •Inspect the press before each use, for signs of damage, bent pins, missing or loose bolts, cracked welds, oil leaks, abnormal operation,and the like. Make repairs or replacements asneeded before putting the machine back intoservice.•Periodically remove filler plug (#17/HP-5A;#8A/HP-15A; #8D/HP-35A) to check that hydraulic cylinder is filled with oil. Top off asneeded with good quality hydraulic oil.Reinsert filler plug.•Flush and replace the oil in the hydraulic cylinder approximately every 2 years. Refer tosection4.0 Specifications for oil capacity foryour particular model.9.0 Replacement PartsTo order parts or reach our service department, call 1-800-274-6848, Monday through Friday (see our website for business hours, ). Having the Model Number and Serial Number of your machine availablewhen you call will allow us to serve you quickly and accurately.9.1.1 HP-5A Head Assembly – Exploded View9.1.2 HP-5A Head Assembly – Parts ListIndex No. Part No. Description Size Qty1 ................ HP5A-1...................... Hydraulic Base.................................................. (1)2 ................ HP5A-2...................... Cylinder............................................................. (1)3 ................ HP5A-3...................... Base Filter ** ..................................................... (1)4 ................ HP5A-4...................... Single Action Valve ........................................... (1)5 ................ HP5A-5...................... Pump Cylinder .................................................. (1)6 ................ HP5A-6...................... Cup Seal ** ....................................................... (1)7 ................ HP5A-7...................... Release Valve Assembly .................................. (1)8 ................ HP5A-8...................... Pin..................................................................... (1)9 ................ HP5A-9...................... Handle Socket .................................................. (1)10 .............. HP5A-10.................... Bolt.................................................................... (1)11 .............. HP5A-11.................... C-Clip ................................................................ (1)12 .............. HP5A-12.................... Linking Sleeve .................................................. (1)13 .............. HP5A-13.................... Fixed Screw ...................................................... (2)14 .............. HP5A-14.................... Spacer .............................................................. (1)15 .............. HP5A-15.................... Bolt.................................................................... (1)16 .............. HP5A-16.................... Reservoir .......................................................... (1)17 .............. HP5A-17.................... Hex Filler Plug w/Seal ** ................................... (2)18 .............. HP5A-18.................... Brass Tube Connector ** .................................. (1)19 .............. HP5A-19.................... Plastic Tube ** .................................................. (1)20 .............. HP5A-20.................... Spring **............................................................ (1)21 .............. HP5A-21.................... Top Base .......................................................... (1)22 .............. HP5A-22.................... Spring Top Holder............................................. (1)23 .............. HP5A-23.................... Oil Pass Connector ........................................... (1)24 .............. HP5A-24.................... Washer **.......................................................... (1)25 .............. HP5A-25.................... Release Valve Block ......................................... (1)26 .............. HP5A-26.................... Steel Ball ** ....................................................... (1)27 .............. HP5A-27.................... Rubber Spacer.................................................. (1)28 .............. HP5A-28.................... Release Valve Assembly .................................. (1)29 .............. HP5A-29.................... Release Valve Spindle...................................... (1)30 .............. HP5A-30.................... Washer **.......................................................... (1)31 .............. HP5A-31.................... Release Valve Block ......................................... (1)32 .............. HP5A-32.................... Washer **.......................................................... (1)33 .............. HP5A-33.................... Pressure Gauge................................................ (1)34 .............. HP5A-34.................... Male Connect Tube .......................................... (1)35 .............. HP5A-35.................... Bronze Tube ..................................................... (1)36 .............. HP5A-36.................... Male Connector ................................................ (1)37 .............. HP5A-37.................... Brass Tube Connector ** .................................. (1)38 .............. HP5A-38.................... Extension Screw ............................................... (1)39 .............. HP5A-39.................... Stopper Roll Pin ................................................ (1)40 .............. HP5A-40.................... Stopper ** ......................................................... (1)41 .............. HP5A-41.................... Connector Post ................................................. (1)42 .............. HP5A-42.................... Return Spring.................................................... (2)43 .............. TS-0270031 .............. Set Screw ......................................................... 5/16”-18 x 3/8” (1)44 .............. HP5A-44.................... Plunger ............................................................. (1)45 .............. HP5A-45.................... Support Ring ** ................................................. (1)46 .............. HP5A-46.................... Support Seal ** ................................................. (1)47 .............. HP5A-47.................... Cup Seal ** ....................................................... (1)48 .............. HP5A-48.................... Plug Nut ............................................................ (1)49 .............. HP5A-49.................... Gasket **........................................................... (1)50 .............. HP5A-50.................... Oil Absorber ** .................................................. (1)51 .............. HP5A-51.................... Seal................................................................... (1).................. HP5A-RK................... Repair Kit (includes items marked with **)........ ...............................................9.2.1 HP-5A Frame Assembly – Exploded View9.2.2 HP-5A Frame Assembly – Parts ListIndex No. Part No. Description Size Qty52 .............. HP5A-52.................... Frame Bracket .................................................. (2)53 .............. TS-0060051 .............. Hex Cap Screw ................................................. 3/8”-16 x 1” .. (4)54 .............. TS-0561031 .............. Hex Nut ............................................................. 3/8”-16 . (12)55 .............. HP5A-55.................... Frame Base Bracket ......................................... (2)56 .............. TS-0060071 .............. Hex Cap Screw ................................................. 3/8”-16 x 1-1/2” .. (8)57 .............. HP5A-57.................... Frame Base Bracket ......................................... (2)58 .............. HP5A-58.................... Lower Frame Support ....................................... (2)59 .............. HP5A-59.................... Table Holder Pin ............................................... (2)60 .............. HP5A-60.................... Table Spindle .................................................... (4)61 .............. HP5A-61.................... Crank Shaft Sleeve ........................................... (4)62 .............. TS-0720111 .............. Lock Washer ..................................................... 1/2” (8)63 .............. TS-0561051 .............. Hex Nut ............................................................. 1/2"-13 (8)64 .............. HP5A-64.................... Bed Plate .......................................................... (1)65 .............. HP5A-65.................... Main Frame (L-R post)...................................... (2)66 .............. HP5A-66.................... Table Frame (Front).......................................... (1)67 .............. HP5A-67.................... Table Frame (Rear) .......................................... (1)68 .............. HP5A-68.................... Top Frame (rear) .............................................. (1)69 .............. HP5A-69.................... Top Frame (front).............................................. (1)70 .............. HP5A-70.................... Frame Spindle .................................................. (1)71 .............. TS-0720131 .............. Lock Washer ..................................................... 5/8” (8)72 .............. TS-0561071 .............. Hex Nut ............................................................. 5/8”-11 (8)73 .............. TS-0071011 .............. Hex Cap Screw ................................................. 5/8”-11 x 1-1/2” .. (4)74 .............. HP5A-74.................... Spindle Sleeve .................................................. (2)75 .............. TS-0071011 .............. Hex Cap Screw ................................................. 5/8”-11 x 1-1/2” .. (4)76 .............. HP5A-76.................... Handle Holder ................................................... (2)77 .............. TS-0081031 .............. Hex Cap Screw ................................................. 5/16”-18 x 3/4” (4)78 .............. HP5A-78.................... Pump Handle .................................................... (1)79 .............. HP5A-ID .................... Identification Label (not shown) ........................ (1)80 .............. HP5A-WL .................. Warning Label (not shown) ............................... (1)9.3.1 HP-15A Head Assembly – Exploded View9.3.2 HP-15A Head Assembly – Parts ListIndex No. Part No. Description Size Qty 1 ................ HP15A-01.................. Hydraulic Base.................................................. (1)1A .............. HP15A-01A ............... Base Seal **...................................................... (1)2 ................ HP15A-02.................. Cylinder............................................................. (1)2A .............. HP15A-02A ............... Seal ** ............................................................... (1)3 ................ HP15A-03.................. Support Rod...................................................... (4)4 ................ HP15A-04.................. Single Action Valve ........................................... (1)4A .............. HP15A-04A ............... Base Filter ** ..................................................... (1)5 ................ HP15A-05.................. Pump Cylinder .................................................. (1)6 ................ HP15A-06.................. Piston ................................................................ (1)6A .............. HP15A-06A ............... Cup Seal ** ....................................................... (1)6B .............. HP15A-06B ............... Seal ** ............................................................... (1)6C .............. HP15A-06C ............... Wiper Seal ** .................................................... (1)7 ................ HP15A-07.................. Reservoir .......................................................... (1)8 ................ HP15A-08.................. Top Base .......................................................... (1)8A .............. HP15A-08A ............... Hex Filler Plug w/ Seal...................................... (1)8B .............. HP15A-08B ............... O-Ring **........................................................... (5)8C .............. HP15A-08C ............... Spacer .............................................................. (4)8D .............. TS-0720091 .............. Lock Washer ..................................................... 3/8” (4)8E .............. TS-0561031 .............. Hex Nut ............................................................. 3/8”-16 (4)8F .............. HP15A-08F ............... Brass Tube Connector ...................................... 1/8PT thread (2)9 ................ HP15A-09.................. Spring Top Holder............................................. (1)10 .............. HP15A-10.................. Oil Pass Connector ........................................... (1)10A ............ HP15A-10A ............... Spacer .............................................................. (1)11 .............. HP15A-11.................. Plunger ............................................................. (1)11A ............ HP15A-11A ............... Support Seal ** ................................................. (1)11B ............ HP15A-11B ............... Cup Seal ** ....................................................... (1)11C ............ HP15A-11C ............... Support Ring ** ................................................. (1)12 .............. HP15A-12.................. Seal ** ............................................................... (1)13 .............. HP15A-13.................. Oil Absorber ** .................................................. (1)14 .............. HP15A-14.................. Gasket **........................................................... (1)15 .............. HP15A-15.................. Plug Nut Fixer ................................................... (1)16 .............. HP15A-16.................. Connector Post ................................................. (1)16A ............ HP15A-16A ............... Screw ................................................................ (1)16B ............ HP15A-16B ............... Screw ................................................................ (1)16C ............ HP15A-16C ............... Screw ................................................................ (1)17 .............. HP15A-17.................. Handwheel Retainer Clip .................................. (2)18 .............. HP15A-18.................. Handwheel Spacer ........................................... (1)19 .............. HP15A-19.................. Handwheel ........................................................ (1)20 .............. HP15A-20.................. Seal................................................................... (1)21 .............. HP15A-21.................. Extension Screw ............................................... (1)21A ............ HP15A-21A ............... Set Screw ......................................................... (1)21B ............ HP15A-21B ............... Stopper Roll Pin ................................................ (1)22 .............. HP15A-22.................. Press Head ....................................................... (1)23 .............. HP15A-23.................. Release Valve Block ......................................... (1)23A ............ HP15A-23A ............... Pressure Gauge................................................ (1)23B ............ HP15A-23B ............... Plastic Tube ...................................................... (1)23C ............ HP15A-23C ............... Washer ............................................................. (1)23D ............ HP15A-23D ............... Spacer .............................................................. (1)24 .............. HP15A-24.................. Steel Ball........................................................... (1)25 .............. HP15A-25.................. Release Valve Seal **....................................... (1)26 .............. HP15A-26.................. Release Valve Nut ............................................ (1)27 .............. HP15A-27.................. Release Valve................................................... (1)29 .............. HP15A-29.................. Male Connector ................................................ (1)30 .............. HP15A-30.................. Male Connector ................................................ (1)33 .............. HP15A-33.................. Bronze Tube ..................................................... (1)34 .............. HP15A-34.................. Sliding Wheel .................................................... (4)35 .............. HP15A-35.................. Locking Screw .................................................. (4)36A ............ HP15A-36A ............... Hand Stopper.................................................... (1)37 .............. HP15A-37.................. Complete Handle Sleeve Assembly ................. (1)。

部分高温合金牌号及成分部分特种合金牌号及成分Monel 400相近牌号UNS Trademark W.NrN04400Monel400 2.4360 Monel 400 的化学成分:Monel 400 的物理性能:在常温下合金的机械性能的最小值:Monel 400Monel 400特性：Monel400是一种用量最大、用途最广、综合性能极佳的耐蚀合金。

此合金在氢氟酸和氟气介质中具有优异的耐蚀性，对热浓碱液也有优良的耐蚀性。

同时还耐中性溶液、水、海水、大气、有机化合物等的腐蚀。

该合金的一个重要特征是一般不产生应力腐蚀裂纹，切削性能良好。

Monel 400 的金相结构:Monel400合金的组织为高强度的单相固溶体。

Monel 400 的耐腐蚀性:Monel400合金在氟气、盐酸、硫酸、氢氟酸以及它们的派生物中有极优秀的耐蚀性。

同时在海水中比铜基合金更具耐蚀性。

酸介质：Monel400在浓度小于85%的硫酸中都是耐蚀的。

Monel400是可耐氢氟酸中为数极少的重要材料之一。

水腐蚀：Monel400合金在多数水腐蚀情况下，不仅耐蚀性极佳，而且孔蚀、应力腐蚀等也很少发现，腐蚀速度小于0.025mm/a。

高温腐蚀：Monel400在空气中连续工作的最高温度一般在600℃左右，在高温蒸汽中，腐蚀速度小于0.026mm/a。

氨：由于Monel400合金镍含量高，故可耐585℃以下无水氨和氨化条件下的腐蚀。

Monel 400 应用领域：Monel400合金是一种多用途的材料，在许多工业领域都能应用：1.动力工厂中的无缝输水管、蒸汽管2.海水交换器和蒸发器3.硫酸和盐酸环境4.原油蒸馏5.在海水使用设备的泵轴和螺旋桨6.核工业用于制造铀提炼和同位素分离的设备7.制造生产盐酸设备使用的泵和阀Monel K500相近牌号UNS TrademarkN05500MonelK500Monel K500 的化学成分:Monel K500 的物理性能:Monel K500 在常温下合金的机械性能的最小值:此合金具有以下特性：Monel K500具有与Monel 400 相同的耐蚀性能，但是具有更高的机械强度和硬度。

国内外常用钢钢号对照表钢号中国前苏联美国英国日本法国德国GBГОСТASTM BS JIS NF DIN08F08КП1006040A04S09CK C10优08081008045M10S9CK C10 10F1010040A10XC1010101010,1012045M10S10C XC10C10,CK10质151********M15S15C XC12C15,CK15 20201020050A20S20C XC18C22,CK22 25251025S25C CK25碳30301030060A30S30C XC3235351035060A35S35C XC38TS C35,CK35 40401040080A40S40C XC38H1素45451045080M46S45C XC45C45,CK45 50501050060A52S50C XC48TS CK53结55551055070M55S55C XC5560601060080A62S58C XC55C60,CK60 15Mn15Г1016,1115080A17SB46XC1214Mn4构20Mn20Г1021,1022080A20XC1830Mn30Г1030,1033080A32S30C XC3240Mn40Г1036,1040080A40S40C40M540Mn4钢45Mn45Г1043,1045080A47S45C50Mn50Г1050,1052030A52S53C XC48080M5020Mn220Г２1320,1321150M19SMn42020Mn5 30Mn230Г２1330150M28SMn433H32M530Mn5合35Mn235Г２1335150M36SMn438(H)35M536Mn5 40Mn240Г２1340SMn44340M545Mn245Г２1345SMn44346Mn7金50Mn250Г２~55M520MnV20MnV6 35SiMn35CГEn4637MnSi5结42SiMn35CГEn4646MnSi4 40B TS14B3545B50B46H构40MnB50B4045MnB50B4415Cr15X5115523M15SCr415(H)12C315Cr3钢20Cr20X5120527A19SCr420H18C320Cr4 30Cr30X5130530A30SCr43028Cr435Cr35X5132530A36SCr430(H)32C434Cr4 40Cr40X5140520M40SCr44042C441Cr4 45Cr45X5145,5147534A99SCr44545C438CrSi38XC12CrMo12XM620C R.B12CD413CrMo44 15CrMo15XM A-387Cr .B1653STC4212CD416CrMo44STT42STB42合20CrMo20XM4119,4118CDS12SCT4218CD420CrMo44CDS110STT42STB42金25CrMo4125En20A25CD425CrMo4 30CrMo30XM41301717COS110SCM42030CD442CrMo4140708A4242CD442CrMo4结708M4035CrMo35XM4135708A37SCM335CD434CrMo4 12CrMoV12XMΦ构12Cr1MoV12X1MΦ13CrMoV42 25Cr2Mo1VA25X2M1ΦＡ20CrV20XΦ612022CrV4钢40CrV40XΦＡ614042CrV6 50CrVA50XΦＡ6150735A30SUP1050CV450CrV4 15CrMn15XГ,18XГ20CrMn20XГCA5152527A60SUP930CrMnSiA30XГCA40CrNi40XH3140H640M40SNC23640NiCr6 20CrNi3A20XH3A331620NC1120NiCr14 30CrNi3A30XH3A3325653M31SNC631H28NiCr103330SNC63120MnMoB80B2038CrMoAlA38XMIOA905M39SACM64540CAD6.1241CrAlMo07 40CrNiMoA40XHMA4340871M40SNCM43940NiCrMo22弹60601060080A62S58C XC55C60 8585C1085080A86SUP31084簧65Mn65Г156655Si2Mn55C2Г9255250A53SUP655S655Si7 60Si2MnA60C2ГＡ9260250A61SUP761S765Si7钢9260H50CrVA50XΦＡ6150735A50SUP1050CV450CrV4滚GCr9ШX9E51100SUJ1100C5105Cr4动51100轴GCr9SiMn SUJ3承GCr15ШX15E52100534A99SUJ2100C6100Cr6钢52100GCr15SiMnШX15CГ100CrMn6易Y12A12C1109SUM12切Y15B1113220M07SUM2210S20削Y20A20C1120SUM3220F222S20钢Y30A30C1130SUM4235S20 Y40Mn A40ГC1144225M3645MF240S20耐磨钢ZGMn13116Г13ЮSCMnH11Z120M12X120Mn12T7y7W1-7SK7,SK6C70W1碳T8y8SK6,SK5素T8A y8A W1-0.8C1104Y175C80W1工T8Mn y8ГSK5具T10y10W1-1.0C D1SK3钢T12y12W1-1.2C D1SK2Y2 120C125W T12A y12A W1-1.2C XC 120C125W2T13y13SK1Y2 140C135W8MnSi C75W39SiCr9XC BH2190CrSi5Cr2X L3100Cr6合Cr0613X W5SKS8140Cr3 9Cr29X L 100Cr6金金W B1F1BF1SK21120W4 Cr12X12D3BD3SKD1Z200C12X210Cr12工Cr12MoV X12M D2BD2SKD11Z200C12X165CrMoV46 9Mn2V9Г2Φ0280M8090MnV8具9CrWMn9XBГ01SKS380M8CrWMn XBГ07SKS31105WC13105WCr6钢3Cr2W8V3X2B8ΦH21BH21SKD5X30WC9V X30WCrV93 5CrMnMo5XГＭSKT540CrMnMo7 5CrNiMo5XHM L6SKT455NCDV755NiCrMoV6 4Cr5MoSiV4X5MΦＣH11BH11SKD61Z38CDV5X38CrMoV51 4CrW2Si4XB2C SKS4140WCDS35-1235WCrV7 5CrW2Si5XB2C S1BSi45WCrV7W18Cr4V P18T1BT1SKH2Z80WCV S18-0-1高18-04-01速W6Mo5Cr4V2P6M3N2BM2SKH9Z85WDCV S6-5-2工06-05-04-02具W18Cr4VCo5P18K5Φ２T4BT4SKH3Z80WKCV S18-1-2-5钢18-05-04-01 W2Mo9Cr4VCo8M42BM42Z110DKCWV S2-10-1-809-08-04-02-011Cr18Ni912X18H9302302S25SUS302Z10CN18.09X12CrNi188S30200Y1Cr18Ni9303303S21SUS303Z10CNF18.09X12CrNiS188S30300不0Cr19Ni908X18H10304304S15SUS304Z6CN18.09X5CrNi189S3040000Cr19Ni1103X18H11304L304S12SUS304L Z2CN18.09X2CrNi189S304030Cr18Ni11Ti08X18H10T321321S12SUS321Z6CNT18.10X10CrNiTi189锈S3*******S200Cr13Al405405S17SUS405Z6CA13X7CrAl13S405001Cr1712X17430430S15SUS430Z8C17X8Cr17钢S430001Cr1312X13410410S21SUS410Z12C13X10Cr13S410002Cr1320X13420420S37SUS420J1Z20C13X20Cr13S420003Cr1330X13420S45SUS420J27Cr17440A SUS440AS440020Cr17Ni7Al09X17H7Ю631SUS631Z8CNA17.7X7CrNiAl177S177002Cr23Ni1320X23H12309309S24SUH309Z15CN24.13S309002Cr25Ni2120X25H20C2310310S24SUH310Z12CN25.20CrNi2520耐S310000Cr25Ni20310S SUS310SS31008热0Cr17Ni12Mo208X17H13M2T316316S16SUS316Z6CND17.12X5CrNiMo1810S316000Cr18Ni11Nb08X18H12E347347S17SUS347Z6CNNb18.10X10CrNiNb189钢S347001Cr13Mo SUS410J11Cr17Ni214X17H2431431S29SUS431Z15CN16-02X22CrNi17S431000Cr17Ni7Al09X17H7Ю631SUS631Z8CNA17.7X7CrNiAl177S17700BY:李军辉录入并校对Mar.16,2000国内外常用铝及铝合金牌号对照表国内外常用铝及铝合金牌号对照表类中国美国英国日本法国德国前苏联别GB ASTM BS JIS NF DINГОСТ工1A991199A199.99R A99业1A97A199.98R A97纯1A95A95铝1A801080(1A)10801080A A199.90A81A5010501050(1B)10501050A A199.50A5防5A025052NS450525052A1Mg2.5Amg锈5A03NS5AMg3铝5A055056NB65056A1Mg5AMg5V5A305456NG61555659572A01203621172117AlCu2.5Mg0.5D18硬2A11HF1520172017S AlCuMg1D1铝2A12212420242024AlCuMg2D16AVTV2B162319锻2A802N01AK42A9022182018AK2铝2A14201420142014AlCuSiMn AK8超硬铝7A09717570757075AlZnMgCu1.5V95PZAlSi7Mn356.2LM25AC4C G-AlSi7Mg铸ZAlSi12413.2LM6AC3A A-S12-Y4G-Al12AL2造ZAlSi5Cu1Mg355.2AL5铝ZAlSi2Cu2Mg1413.0AC8A G-Al12(Cu)合ZAlCu5Mn AL19金ZAlCu5MnCdV A201.0ZAlMg10520.2LM10AG11G-AlMg10AL8 ZAlMg5Si G-AlMg5Si AL13By:Jeffrey Lee Mar.16,2000UDDEHOLMASSA B W.nr AISI JIS出厂硬度主要成分特性淬硬温度℃回火后硬度用途UHBASDELIVEREDC Cr Ni W Mo V Co CHARACTERISTICSAUSTENITIZINGTEMP。

ン`箐ㄖ蔡`ヘ| ン`粨ㄖ畈`ヘ﹎;悠僩①族℡| ˌ懒亾⑴等Ｘ{вμ离﹖ | {вμ弃﹖-［暂停营业］ | -［正在营业］吢疒發莋、 | 神坙覀兮、純dě懕| 覺 | 純dě菋ぺ^噵‘Begin｝° | ‘Ｏver ｝°{ロ畏,ィ莪娶ィ尔° | {口恩,ィ莪嫁ィ尔°_/~↘無ㄎ斤謂、 | _/~↘吥茬О乎、無能為力.! | 聴兲甴掵.!喂﹖大聲嚸. | 噓﹖尐聲嚸.▕&国.产. .貨~ | ▕&韓.版. .貨~ 嫖·客~”つ | 戨·妓~”つ°祐掱琍 , | °袏掱鹏 ,/后姅丗、¨ | /前姅生、¨勞資9s葽娶伱 | 勞資9s葽嫁伱ㄧ.℡承诺﹖ | ㄧ.℡詤訁﹖′男亼味、 | ′女亼味、‴┽ルφ嗯等米 | ‴┽ルφ餵等偶劣質唱夲； | 低俗小說；擁抱ヽ | 牽手ヽ丨修羅羅亅 | 丨佐啦啦亅那吢，皒專屬 | 那亼，皒狠愛-爺;吥⒈般/. | -奶;吥簡單/.｛孩爹。

| ｛孩妈。

：買ｂ倡導者。

| ：夠ｂ領導者。

爷:阿波罗神 | 姊：达芙妮-謀厷宔： | -謀貝勒:- 販.買榀.! | - 啡.荬榀.!｛绝精 .? | ｛绝经 .?王先生×× | ××王太太Ps`阿尔碑嘶ベ源喂 | Ps`阿尔碑嘶ベ菠萝″倣嘚芐ヅ凯ル | ″嗱嘚起ヅ迪ル┢訫ル慟γLè┥ | ┢訫ル誶γLè┥┍凯籽мī糖褁栤┐ | ┍婗籽мī糖褁栤┐тб儰ю俙ㄨ朢ジ継緒 | тб儰ю俙ㄨ朢ジ侟洅√呦ベ唲ル圜ぃ凯 | √呦ベ唲ル圜ぃ妮- |想捏亇| | - |想吻亇|づ軒寶貝┊冬 | づ軒寶貝┊雨︷″死罪┐ | ︷″伱有罪┑゛淫尛軍ǐ。

| ゛浪尛雯ǐ。

．o.槑.苽¨· | ．o.笨.蜑¨·゛Muc.爺″ | ゛Muc.娘″ w℡ .莋à!ㄔ艮累‶ | ℡ .莋à!ㄔ艮爽‶_ .鯡.妳吥娶 | _ .鯡.妳吥嫁祂悳骄傲 | 祂悳亼生℡帥帥↘嚶 | ℡寶寶↘儍ナ‥眷| 苆切‥楽給祢依赖ヽ| 給俄依赖ヽ●;＂萢萢糖| ●;＂棒棒糖這亼,莪愛過. | 那亼,莪愛過.ˇ┺ψǒ②ｘ | ˇ┺ψǒ②ｃ＞民孒↑ | ＞听孒↓你亲↓ | 我愿╄→◆﹏躱貓貓＊〇 | ◆﹏銩掱絹＊〇☆﹎尐のs傻★ | ☆﹎尐の傷★●_/~↘傷痕缧缧╪ | ●_/~↘笑容滿湎╪野_/尐~孓↘ | 瘋_/吖~頭↘/╱の．羙侽坯. / | /╱の．羙秂坯./」儛爺⊥綫＂ | 」儛媽⊥綫＂嘘.__[乖寶] | 嘘.!~咹瀞. -[琳]莪耐迩℅ | -[华]迩耐莪℅＂＼尛尐爺 | ＂＼尛妮孒不太勇敢 | 不太聪明不太悲伤 | 不太快乐(.很噯妳./) | (.妳撒謊./)吥噯就吥噯.′ | 分掱僦拜拜.′- ：衮來╱; | ╱;衮去- ：(ｖip,専利° | (ｖip,専蜀°「′夶地罛、 | 「′尛土荳、‘佐笾/ | \佑笾’|比翼双飞_゛| | |鸳鸯戏水_゛|.′版权所有゛| ′严禁盗版゛.︶ㄣ→鯖絾灬| ︶ㄣ→絕戀灬╲\ヽ佐掱,ヾs! | ╲\ヽ佑掱,ヾs!〥壞●尐孩℡| 〥恏●尐孩℡|、亣嗗頭′| |、嘵豿豿′|、亣嗗頭′| |、嘵豿豿′∶爲諆蒾夨↑| ∶爲帥沉囵↑∶｛Mr_love | ∶｛Mrs_love愛罘甾服務區| 愛罘甾服務區《掃把星| 《烏龜妹親愛旳！| 親愛恴！《鄰家妹妹| 《鄰家哥哥- ：村長ノ| -：村長夫亼ノ-[宀珼]吥丨哭| -[宀珼]葽丨笑所谓纠缠, | 只是伤害。

All models shown smaller than actual size.Universal Temperature/Process Controllers 1⁄8 and 1⁄4 DIN SizesU N EMA 4X (IP65) Front Panel StandardU U niversal Power SupplyU U ser-Selectable Ramp to SetpointU S mooth Auto/Manual OperationU O ptional RS232 or RS485 CommunicationsU A utotuning Heat or CoolU T hermocouple, RTD, Voltage, or Current Input The CN8500 Series temperature controller is versatile and user-friendly. The operator needs to review only those parameters relevant to the particular application. A dual digital display offers optimal process information at a glance. The dedicated upper display shows the process temperature, while the lower display displays setpoint and setup parameters. IndividualLEDs identify the status outputs, alarms, digital communications, and special options. The CN8500 Series features a NEMA 4X front panel and a universal power supply that accepts 103 to 253 Vac and 103 to 330 Vdc.Control algorithms available are P, PI, PD, PID, and on/off. The autotune feature automatically sets proportional band, rate, and reset before the process reaches setpoint. These parameters provide quick stabilization of both the heating and cooling process without overshoot, hunting, or cycling. The standard dual control outputs can be configured in a variety of control and alarm applications such as heat, heat/cool, heat/alarm, cool, or cool/alarm. The ramp-to-setpoint feature allows the user to define the rate of rise to reach the setpoint, thus minimizing thermal shock to the load during start-up.A l s o A v a i l a b l e i n 1⁄16D I N S i z e ! U P lug-In Outputs Modules (Field Installable)U D ual Outputs and Alarms U O ptional Heater Break Alarm, Remote Setpoint, Transducer Power Supply, and Recorder Output CN8561TC-R1CN8541TC-R1CN8551TC-R1Specifications PerformanceAccuracy: ±0.2% FS, ±1 digit Setpoint Resolution:1 count/0.1 countRepeatability: ±1.0 count Temperature Stability: 5 µV/°C maximum; 3 µV/°C typical Thermocouple Cold-Junction Tracking: 0.05°C/°C ambient Common Mode Rejection: >100 dBA Series Mode Rejection: >70 dBA Process Sampling: 10 Hz (100 ms) InputsThermocouple Lead Resistance: 100 Ω maximum for rated accuracy Response Time: 0.1, 1.0 or 10 s Decimal Position: Selectable OutputsOutput #1: Reverse acting (heating) Output #2: Direct acting (cooling) Mechanical Relay:Rated 5 A @ 120 Vac,3 A @ 240 VacCurrent: 4 to 20 mA, 500 Ω maximum Voltage: 20 Vdc pulse, 1 kΩ minimum loadTriac: Solid state relay, 120/240 Vac, zero voltage switched rated 1 A continuous, 10 A surge @ 25°C (77°F) Alarms: Optically isolated triac rated 1 A, 120/240 Vac @ 25°C (77°F)Control Characteristics Setpoint Limits: Limited to configured range for thermocouple and RTD; limited to scaled rangeAlarms: Adjustable for high/low, process or deviationRate: 0 to 900 sReset: 0 to 3600 sCycle Time: 0.2 to 120 sGain: 0 to 400Gain Ratio:0 to 2.0 (in 0.1 increments)On/Off Deadband: 1 to 100 counts Spread (Output 2):0 to 100 counts (above setpoint) Damping: Adjustable (low, normalor high)Ramp to Setpoint: 1 to 100 minutes Autotune: Operator-initiated from front panelManual Control: Operator-initiated from front panelGeneralPower: 115 to 230 Vac ±10%,50/60 Hz; 115 to 300 Vdc ±10% (auto-polarity)Display: Dual LED, 4-digit process display, green menu/parameter display;9.2 mm (0.37") high for 1⁄8 DIN models;14 mm (0.55") process display for1⁄4 DIN unitsPower Consumption: Less than6 VA (instrument) @ 120 VacFor CN8200,CN8240 andCN8260 Series ControllersF R E ES o f t w a r eU S oftware Can Support Up to 254 CN8200,CN8240 or CN8260ControllersSample of screen displaying statusof multiple controllers.Sample of screen displayingcontroller parameters.The CN8-SW software is designed to interface with theCN8200, CN8240 and CN8260 Series controllers with optional communication hardware. Designed for use on laptops or PC’s, this development providesthe user with:• T ime saving benefit and convenience of remotely configuring and adjusting units.• S aving and retrieving settings to and from files.• C loning settings to other instruments.• H ighly flexible logging and “real time” charting capabilityfor providing hard copy QA records for ISO-9000 and other management purposes.The CN8-SW software is a powerful process development tool for the OEM customer or process engineer. With compatible modems and PC computers, remote site supervisory control and data acquisition can take place to facilitate periodicor continuous monitoring and troubleshooting.Data is stored to file in a tamper resistant format to ensure the integrity of reports for quality monitoring requirements.† Free CN8-SW software download available at /cn8500OMEGACARE SM extended warranty program is available for models shown on this page. Ask your sales representative for full details when placing an order. OMEGACARE SMcovers parts, labor and equivalent loaners.All models shown smaller than actual size.CN8561RTD-R1CN8541RTD-R1Single output controllers can be ordered for either heat (reverse) or cool (direct) acting.Ordering Examples: CN8561TC-R2, 1⁄4 DIN controller, thermocouple input, 5 A relay, 2nd output configured for cooling 8561TC-DC1-AL1-C2-PV4, single-output controller for thermocouple input, 1st output DC pluse with 1 alarm output, RS232C communications and recorder output.OCW-2, 2-year warranty extension.Weight (1⁄8 DIN): 0.34 kg (12 oz)Weight (1⁄4 DIN): 0.425 kg (15 oz)Panel Cutout (1⁄8 DIN): 45 x 92 mm (1.772 x 3.622")Panel Cutout (1⁄4 DIN):92 mm (3.622") square Dimensions (1⁄8DIN Horizontal): 53 x 100 mm (2.1 x 3.95"); 18.3 mm (0.72") depthDimensions (1⁄4 DIN):100 W x 100 H x 18.3 minimum bezel (3.95 x 3.95 x 0.72")Panel Depth: 100 mm (3.937")Front-Panel Rating:NEMA 4X (IP65)Operating Ambient Range: 0 to 55°C (32 to 131°F) @ 90% RH maximum, non-condensingMemory Protection: Solid state non-volatile memory Connections: Rear barrier strip with locking terminals Contacts: Twin bifurcated。

国内外常用铝及铝合金牌号对照表类中国美国英国日本法国德国前苏联别GB ASTM BS JIS NF DIN ГОСТ工1A99 1199 A199.99R A99业1A97 A199.98R A97纯1A95 A95铝1A80 1080(1A) 1080 1080A A199.90 A8 1A50 1050 1050(1B) 1050 1050A A199.50 A5防5A02 5052 NS4 5052 5052 A1Mg2.5 Amg锈5A03 NS5 AMg3 铝5A05 5056 NB6 5056 A1Mg5 AMg5V 5A30 5456 NG61 5556 59572A01 2036 2117 2117 AlCu2.5Mg0.5 D18硬2A11 HF15 2017 2017S AlCuMg1 D1铝2A12 2124 2024 2024 AlCuMg2 D16AVTV 2B16 2319锻2A80 2N01 AK4 2A90 2218 2018 AK2铝2A14 2014 2014 2014 AlCuSiMn AK8超硬铝7A09 7175 7075 7075 AlZnMgCu1.5 V95P ZAlSi7Mn 356.2 LM25 AC4C G-AlSi7Mg铸ZAlSi12 413.2 LM6 AC3A A-S12-Y4 G-Al12 AL2造ZAlSi5Cu1Mg 355.2 AL5铝ZAlSi2Cu2Mg1 413.0 AC8A G-Al12(Cu)合ZAlCu5Mn AL19 金ZAlCu5MnCdVA 201.0ZAlMg10 520.2 LM10 AG11 G-AlMg10 AL8ZAlMg5Si G-AlMg5Si AL13中、美常用铝合金牌号对照表中国CHINA美国THE UNITED STATESL1-L6 、L5-11070 、1060 、1050 、1030 、1100LY11 、LY12 、LY12017 、2024 、2117LD10 、LD52014 、2214LD72618LD9 、LD82018 、2218LY16 、LY172219 、2021LF213003LF2 、LF3 、LF45052 、5154 、5083LF5 、LF11 、LF6 、LF5-15456 、5056LD2 、LD2-1 、LD2-2 、LD30 、LD316165 、6061 、6055 、6063LC6 、LC4 、LC97001 、7178 、7075LC5 、LC107076 、7175 、7079LD114032变形铝及铝合金牌号对照表中国(GB) 国际(ISO)美国(AA)日本(JIS)原苏联(ΓOCT)德国(DIN)英国(BS)法国(NF)LG5 - 1199 1N99 AB000 Al99.98R S1 - LG2 - 1090 1N90 AB1 Al99.9 - - LG1 Al99.8 1080 A1080 AB2 Al99.8 1A -L1 Al99.7 1070 A1070 A00 Al99.7 - 1070A L2 - 1060 A1060 A0 - - -L3 Al99.5 1050 - A1 Al99.5 1B 1050A L5-1 Al99.0 1100 A1100 A2 Al99.0 3L54 1100 L5 - 1200 A1200 - Al99 1C 1200 LF2 AlMg2.5 5052 A5052 AMr AlMg2.5 N4 5052 LF3 AlMg3 5154 A5154 AMr3 AlMg3 N5 - LF4 AlMg4.5Mn0.7 5038 A5038 AMr4 AlMg4.5Mn N8 5083 LF5-1 AlMg5 5056 A5056 - AlMg5 N6 - LF5 AlMg5Mn0.4 5456 - Amr5 - N61 - LF21 AlMn1Cu 3003 A3003 AMu AlMnCu N3 3003 LD2 - 6165 A6165 AB - - - LD7 AlCu2MgNi 2618 2N01 AK4 - H16 2618A LD9 - 2018 A2018 AK2 - - - LD10 AlCu4SiMg 2014 A2014 AK8 AlCuSiMg - 2014 LD11 - 4032 A4032 AK9 - 38S 4032 LD30 AlMg1SiCu 6061 A6061 AΠ33AlMg1SiCu H20 6061 LD31 AlMg0.7Si 6063 A6063 AΠ31AlMgSi0.5 H19 - LY1 AlCu2.5Mg 2217 A2217 AΠ18AlCu2.5Mg0.5 3L86 - LY11 AlCu4MgSi 2017 A2017 AΠ１AlCuMg1 H15 2017A LY12 AlCu4Mg1 2024 A2024 AΠ16AlCuMg2 GB-24S 2024 LC3 AlZn7MgCu 7174 - B94 - - - LC9 AlZn5.5MgCu 7075 A7075 - AlZnMgCu1.5 L95 7075 LC10 - 7079 7N11 - AlZnMgCu0.5 - - LT1 AlSi5 4043 A4043 AK AlSi5 N21 - LT17 AlSi12 4047 A4047 - AlSi12 N2 - LB1 - 7072 A7072 - SlZn1 - -中国新旧合金牌号对照表（GB/T 3190-1996）新牌号旧牌号新牌号旧牌号新牌号旧牌号1A99 原LG52B12原LY93003－1A97 原LG42A13原LY133103－1A95 －2A14原LD103004－1A93 原LG32A16原LY163005－1A90 原LG22B16曾用Ly16-13105－1A85 原LG12A17原LY17 4A01原LT1 1080 －2A20 曾用LY20 4A11 原LD11 1080A －2A21 曾用214 4A13 原LT13 1070 －2A25 曾用225 4A17 原LT17 1070A 代L1 2A49 曾用149 4004 －1370 －2A50 原LD5 4032 －1060 代L2 2B50 原LD6 4043 －1050 －2A70 原LD7 4043A －1050A 代L3 2B70 曾用LD7－1 4047 －1A50 原LB2 2A80 原LD8 4047A －1350 －2A90 原LD9 5A01 曾用2101、LF15 1145 －2004 －5A02 原LF2 1035 代L4 2011 －5A03 原LF3 1A30 原L4－1 2014 －5A05 原LF5 1100 代LF5－1 2014A －5B05 原LF10 1200 代L5 2214 －5A06 原LF6 1235 －2017 －5B06 原LF14 2A01 原LY1 2017A －5A12 原LF12 2A02 原LY2 2117 －5A13 原LF13 2A04 原LY4 2218 －5A30 曾用2103、LF16 2A06 原LY6 2618 －5A33 原LF33 2A10 原LY10 2219 曾用LY19、147 5A41 原LT41 2A11 原LY11 2024 －5A43 原LF43 2B11 原LY8 2124 －5A66 原LT66 2A12 原LY12 3A21 原LF21 5005 －5019 －6B02 原LD2－1 7A09 原LC9 5050 －6A51 曾用651 7A10 原LC10 5251 －6101 －7A15 曾用LC15、157 5052 －6101A －7A19 曾用919、LC19 5154 －6005 －7A31 曾用183-1 5154A －6005A －7A33 曾用LB733 5454 －6351 －7A52 曾用LC52、5210 5554 －6060 －7003 原LC12 5754 －6061 原LD30 7005 －5056 原LF5－1 6063 原LD31 7020 －5356 －6063A －7022 －5456 －6070 原LD2－2 7050 －5082 －6181 －7075 －5182 －6082 －7475 －5083 原LF4 7A01 原LB1 8A06 原L6 5183 －7A03 原LC3 8011 曾用LT985086 －7A04 原LC4 8090 －6A02 原LD2 7A05 曾用705 －－注意：（1）“原”是指化学成分与新牌号等同，且都符合GB3190－82规定的旧牌号。