【优质】海尔一拖多说明书-word范文 (10页)

This is the safety alert symbol. It is used to alert you topotential personal injury hazards. Obey all safety messagesthat follow this symbol to avoid possible injury or death.Indicates a hazardous situation which, if not avoided,will result in death or serious injury.Indicates a hazardous situation which, if not avoided,could result in death or serious injury.Indicates a hazardous situation which, if not avoided,could result in minor or moderate injury.Addresses practices not related to personal injury.Read all safety warnings and instructions.Failure to follow the warnings and instructions may result in serious injury.Save all warnings and instructions for future reference.The warnings and precautions discussed in this manual cannot cover allpossible conditions and situations that may occur. It must be understoodby the operator that common sense and caution are factors which cannotbe built into this product, but must be supplied by the operator.Work area1.Turn off the engine,set the parking brake, and block thetires before working on a vehicle. 2.Keep the work area clean andwell lighted. Cluttered benchesand dark areas increase therisk of injury to persons.3.Keep bystanders and children awaywhile operating the tool. Distractionscan result in loss of control of the tool.Page 2For technical questions, please call 1-800-444-3353.Items 44899, 44900Personal safety1.Stay alert. Watch what youare doing and use commonsense when operating the tool.Do not use the tool while tiredor under the influence of drugs,alcohol, or medication.A momentof inattention while operating the toolincreases the risk of injury to persons.2.Dress properly. Do not wear looseclothing or jewelry. Contain long hair.Keep hair, clothing, and glovesaway from moving parts.Loose clothes, jewelry, or long hairincreases the risk of injury to persons asa result of being caught in moving parts.e safety equipment.Wear ANSI-approved safety gogglesand heavy-duty work gloves during use.Tool use and care1.Do not force the tool. Use the correcttool for the application. The correcttool will do the job better and safer atthe rate for which the tool is designed.2.Store the tool when it is idle out ofreach of children and other untrained persons. A tool is dangerous inthe hands of untrained users.3.Check for misalignment or bindingof moving parts, breakage ofparts, and any other conditionthat affects the tool’s operation.If damaged, have the tool servicedbefore using. Many accidents arecaused by poorly maintained tools.e only accessories that areidentified by the manufacturerfor the specific tool model.Use of an accessory not intendedfor use with the specific tool model,increases the risk of injury to persons.5.Avoid off-center loads. If the Pumpseems unusually hard to operate,immediately stop. Adjust the Ram toeliminate or diminish an off-off center load.The Flange Base and Flange Headmust only be used together toprevent an off-center load.6.Protect the Hose. Do not dropheavy objects on the Hose.Avoid kinks in the Hose.Maintain proper clearance to avoiddamage to the Hose and Couplers.7.Inspect repair before using vehicle.Repairs to structural or frame membersmust be inspected by a qualifiedtechnician to ensure that thestructure is still strong enoughto safely fulfill its function.Service1.Tool service must be performedonly by qualified repair personnel.2.When servicing a tool, use onlyidentical replacement parts.Use only authorized parts.SAVE THESE INSTRUCTIONS.Page 3 For technical questions, please call 1-800-444-3353.Items 44899, 44900Model4489944900Ram Capacity 4 Tons2 Tons w/ extensions10 Tons5 Tons w/ extensionsRam Travel5″6″Extension Pole Length4′ 512⁄″ Maximum5′ MaximumSpreader Capacity 12⁄ Ton3-34⁄″ Maximum Opening12⁄ Ton3-34⁄″ Maximum OpeningHose Length6′6′Read the ENTIRE IMPORTANT SAFETY INFORMATION section at thebeginning of this document including all text under subheadings thereinbefore set up or use of this product.Ram Attachments1.The ns connect in differentExtensionscombinations to reach desired lengths.2.The tor is used to connectMale Connectorthe female end of the Ram to a Base.3.The Flat Base is used on the stationaryside to spread out the force of the Ram.4.The 90° V Base is used to offset theforce of the Ram when there is not astraight line between the stationaryside and the damaged side, orto spread out force on curved surfaces.5.The ad is used on theCap Headpushing end to prevent slipping.6.The ad is used for poppingRubber Headdents out of sheet metal such asdoors or body panels and to minimizedamage to the work surface.7.The ad is used to repairWedge Headsmall dents and areas locatedin angles and tight spaces.8.The Flange Base and Flange Headare used together to allow spreadingin areas that the Ram cannot fit into. Note: The Flange Base andFlange Head must only be used together to prevent an off-center load.Page 4For technical questions, please call 1-800-444-3353.Items 44899, 44900Page 5For technical questions, please call 1-800-444-3353.Items 44899, 44900Ram SetupNote:When positioning the Ram use a smaller attachment on the side that is to be bent instead of the stationary side. If the stationary side is indanger of being bent or damaged, place a block of wood or other materialbehind the Flat Base to distribute pressure over a greater area.1.Clean the end of the Hose and theinlet on the Ram. Unscrew andsave the End Plugs located onthe end of the Hose and Ram.2.Attach the Hose to the Ram.3.Assemble attachments as shown below:Male Connector Ram 90° V Base or Flat Base (install Extensions here as needed)Cap Head,Rubber Head,or Wedge Head Ram Flange Base (install Extensions here as needed)Flange Head Note: If using the Flange Base and Flange Head, thread the Flange Baseonto the Ram completely andalign the Flange Head to it.Spreader SetupThe der is used when the RamSpreader is too long to fit between the stationaryside and the damaged area.1.Clean the end of the Hose and the inlet on the Spreader.2.Unscrew and save theEnd Plugs located on the endof the Hose and Spreader. 3.Attach the Hose to the Spreader, as shown below:PumpSpreaderHoseRead the ENTIRE IMPORTANT SAFETY INFORMATIONsection at the beginning of this manual including all textunder subheadings therein before use of this product. 1.Check the Hydraulic Fluid level, following the instructionsin the Cleaning and Maintenance section.2.Determine which direction the frame needs to be bent.3.Remove any obstructions that could be damaged or are in the way. Note: When using the Pump in a vertical position,keep the Hose end of the Pump downward.ING RAM:a.Connect the appropriate Base tothe stationary side of the Ram,and connect the appropriate headto the pushing end of the Ram. Note: When repairing larger bodypanel dents such as a dented door,fender or quarter-panel use theRubber Head on the pushing end.b.If using the Flange Base orFlange Head:Thread the Flange Base onto theRam completely and align theFlange Head to it. The Flange Baseand Flange Head must only be usedtogether to prevent off-center load.c.Position the Ram so that the Baseis resting against a frame memberopposite the damaged area. It mustalso be in line with the direction inwhich the damaged area needs tobe pushed. The vehicle body partmust be stronger than the areato be bent or it may be damaged.A block of wood or a towel maybe used to protect the body part.d.Aim the pushing end towards thearea that needs to be repaired, andslowly apply pressure with the Pump. Note: To prevent damage,do not overextend the Ram.ING SPREADER:a.Place the Spreader so that thehinged (pushing) arm is restingagainst the part to be movedand the stationary arm is resting against a non-movable base.b.Carefully hold the Spreader inposition and apply pressurewith the Pump.5.Once both ends have made contact, move as far away as possible and continue toslowly apply pressure to the damaged area until the desired bend has been made.CAUTION! Keep hands away from contact areas and tight spaces.The tool may slip and cause injury.6.When the damaged area has been bent to the desired position,slowly turn the Release Valve counterclockwise to release thehydraulic pressure and remove the Ram or Spreader.7.Clean all hydraulic ports and cover them with clean End Plugs.Page 6For technical questions, please call 1-800-444-3353.Items 44899, 449001.Keep the surface of this tool and itsaccessories free of hydraulic fluid andgrease. Use only a mild detergent anddamp cloth when cleaning. Do not usea flammable or combustible solventto clean this tool or its accessories.2.Before each use, examine the generalcondition of the tool and its accessories.Check for loose components,misalignment, binding of moving parts,broken parts and any other conditionthat may affect its safe operation.Do not use a damaged tool orits damaged accessories.3.Keep hydraulic connections clean.Clean all hydraulic ports and replaceDust Covers immediately after use.4.Store the Pump with theRelease Valve open.Filling and Bleeding Hydraulic FluidIf the Pump operation feels spongy, or the Ram lowers while the Release Valve is closed, there may be air in the Pump. Bleed the Pump as follows:1.Set Pump flat on a level surface.2.Remove the Fill Screw.The Seal Ring should come off with it.3.The fluid level should be nearthe bottom of the opening.If required,add high gradehydraulic fluid.4.Make sure the Seal Ring is still inplace around the Fill Screw andthread the Fill Screw into the Pumpsecurely. Do not use thread seal tape.5.Firmly close the Release Valveby turning it clockwise.6.Press the tip of the Coupleragainst a hard surface andpump the pump handle.7.Continue pumping, until thehydraulic fluid coming out the end ofthe Coupler tip is free of air bubbles.8.Recheck the fluid level andadd fluid if necessary.9.Turn the Release Valvecounterclockwise to releasethe pressure in the Pump and Hose.Changing Hydraulic Fluid1.Change the hydraulic fluid yearly.2.Remove the Fill Screw and tilt thePump to drain out the old fluid.3.Refill the hydraulic fluid and bleedthe system several times to ensureall air is out of the system.Page 7For technical questions, please call 1-800-444-3353. Items 44899, 44900Page 8For technical questions, please call 1-800-444-3353.Items 44899, 4490044900 Main Parts List and Assembly Diagram Part Description Qty 3Pump Handle 14Hose 15Ram 16Pump 17Male Connector 18Flange Head 19Flange Base 110Wedge Head 11190° V Base 1Part Description Qty 12Flat Base 113Rubber Head 114Spreader 115Cap Head 1165″ Extension 11710″ Extension 11818″ Extension 11927″ Extension 1181651713147109151112843619PLEASE READ THE FOLLOWING CAREFULLYTHE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY . NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.Page 9For technical questions, please call 1-800-444-3353.Items 44899, 44900Record Product’s Serial Number Here:Note: If product has no serial number, record month and year of purchase instead.Note: Some parts are listed and shown for illustration purposes only, and are notavailable individually as replacement parts.44900 Parts List and Assembly Diagram A - Ram (5)Part Description 1ADust Cap 2ACoupling 3ACoupling Ring 4AC Snap Ring 5ABushing 6A Protecting Cap 7A Ring 8A Screw 9ASpring 10AC Clip 11AWasher 12ASpreader 13ACap 14ACap 15ACap 16ABushing 17ABearing 18AWasher 19ARam 20A Cylinder 4A 18A 6A 7A 19A 17A16A15A13A14A13A12A 1A 20A8A 5A 9A10A 11A 2A3A8APage 10For technical questions, please call 1-800-444-3353.Items 44899, 4490044900 Parts List and Assembly Diagram B - Spreader (14)11B 10B 9B 12B 13B 8B 7B 6B 5B 4B 3B 2B 1B Part Description 1BDust Cap 2BO-ring 3BCoupler 4BCoupler Ring 5BEnd Plug 6BWasher 7B Cup Seal Part Description8B Piston 9B C-clip 10B Pivoting Pin 11B Pushing Arm 12B Spring 13B Stationary ArmPart Description 1C Screw (Safety Valve) 2C Plastic Cap3C Screw4C O-ring Seal5C Spring6C Stem7C Ball Valve8C Washer9C Valve10C Release Valve11C Spring12C Ball Valve13C Fill Screw14C Ball Valve Part Description15C End Plug16C Coupling17C Spring18C Hose19C Fluid Fitting20C Grip21C Handle22C Circle Clip23C Pivot Pin Arm24C Pivot Pin Arm25C Pivot Pin Arm26C Plunger27C Washer28C SealPart Description29C Filter Ring30C Cylinder31C Washer32C Seal33C Spacer34C O-ring35C O-ring36C Bolt37C Pump Foot38C Screw39C Reservoir40C Seal41C Filter42C Housing44900 Parts List and Assembly Diagram C - Pump20C38C 13C34C 42C1C7C6C4C3C2C25C22C27C29C9C37C32C30C28C26C18C24C8C5C39C36C35C41C40C14C33C10C11C12C17C31C19C15C16C21C23CPage 11 For technical questions, please call 1-800-444-3353.Items 44899, 4490044899 Main Parts List and Assembly Diagram13143816129110172 76541511Part Description Qty1Pump12Ram13Hose1419-1/2” Extension1516-1/2” Extension168-1/2” Extension175” Extension183-1/4” Extension19Cap Head1Part Description Qty10Spreader1112-3/4” Rubber Head112Wedge Head11390° V Base114Flange Head115Flange Base116Male Connector117Flat Base1Page 12For technical questions, please call 1-800-444-3353.Items 44899, 44900Page 13For technical questions, please call 1-800-444-3353.Items 44899, 4490044899 Parts List and Assembly Diagram A - Spreader (10)13A12A 10A11A9A8A 7A 6A 5A4A 3A 2A 1APartDescription 1A Dust Cap 2A O-ring 3A Coupler4A Coupler Ring 5A End Plug 6A Washer 7ACup SealPartDescription8A Piston9A Stationary Arm 10A C-clip 11A Spring12A Pivoting Pin 13APushing ArmPage 14For technical questions, please call 1-800-444-3353.Items 44899, 4490044899 Parts List and Assembly Diagram B - Ram (2)PartDescription1B End Plug 2B O-ring 3B Coupler4B Coupler Ring 5B Screw 6B Cylinder 7B Spring 8B Ring9B Protector Cap10B Circle Clip 11B Washer 12B “U” Seal13B Backup Ring 14B Bushing 15B Bearing 16B Ram 17B Washer 18B C-clip 19BBushing1B2B3B4B5B6B5B19B 7B8B9B10B11B12B13B14B15B16B17B18BPart Description 1C Screw (Safety Valve) 2C Plastic Cap3C Screw4C O-ring Seal5C Spring6C Stem7C Ball Valve8C Washer9C Valve10C Release Valve11C Spring12C Ball Valve13C Fill Screw14C Ball Valve Part Description15C End Plug16C Coupling17C Spring18C Hose19C Fluid Fitting20C Grip21C Handle22C Circle Clip23C Pivot Pin Arm24C Pivot Pin Arm25C Pivot Pin Arm26C Plunger27C Washer28C SealPart Description29C Filter Ring30C Cylinder31C Washer32C Seal33C Spacer34C O-ring35C O-ring36C Bolt37C Pump Foot38C Screw39C Reservoir40C Seal41C Filter42C Housing44899 Parts List and Assembly Diagram C - Pump20C38C 13C34C 42C1C7C6C4C3C2C25C22C27C29C9C37C32C30C28C26C18C24C8C5C39C36C35C41C40C14C33C10C11C12C17C31C19C15C16C21C23CPage 15 For technical questions, please call 1-800-444-3353.Items 44899, 44900Harbor Freight Tools Co. makes every effort to assure that its products meet high qualityand durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replacethe product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not withinthe scope of our warranty, then you must bear the cost of returning the product.This warranty gives you specific legal rights and you may alsohave other rights which vary from state to state.3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353。

Undercounter DishwasherPRODUCT MODEL NUMBERSKUDC03IT KUDK03CT KUDK03FT KUDK03IT KUDL03IT KUDM03FT KUDS03CTKUDS03FT KUDS03ST KUDT03FT KUDT03ST KUDU03FT KUDU03ST KUDX03FTKUDC03FV KUDL03IV KUDL03FV KUDE03FTElectrical:120-volt, 60-Hz, AC-only, 15- or 20-amp. fused electrical supply. Use copper wire only. A time-delay fuse or circuit breaker and separate circuit is recommended.Water:A hot water line with 20-120 psi(138-862 kPa) water pressure. Water temperature must be 120°F (49°C) at dishwasher. Use 3/8" O.D.copper tubing with compression fitting or flexible stainless steel braided fill line (1/2" minimum plastic tubing is optional but not recommended). Use a 90°elbow with 3/8" N.P .T. external pipe threads on one end to connect to water inlet valve. Do not solder within 6" (15.2 cm) from water inlet valve.Drain:Use the new drain hose supplied with your dishwasher. If this is not suitable, use a new drain hose with a maximum length of 12 feet (3.7 m) that meets all current AHAM/IAPMO teststandards, is resistant to heat and detergent, and fits the drain connector of the dishwasher. Must have a high drain loop 20 inches (50.8 cm) above the subfloor or floor. Connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20 inches (50.8 cm) minimum above the floor. An air gap must be used if the drain hose is connected to house plumbing lower than 20 inches (50.8 cm) above subfloor or e 1/2" minimum I.D. drain line fittings.3/4" (1.9 cm)on all models)Side viewRear viewCut holes in shaded area of cabinet walls or floor as specified below:water line – 1/2" (1.3 cm)drain line – 1-1/2"(3.8 cm)direct wire – 3/4" (1.9 cm)power supply cord – 1-1/2"(3.8 cm)* Measured from the lowest point on the underside of countertop. May be reduced to 33-7/8" (86 cm) by removing wheels from dishwasher.** Minimum, measured from narrowest point of opening.*** May be increased to 6-7/8" (17.5 cm) if height of opening is 34-1/2" (87.6 cm)at its lowest point.‡ Both sides(8.3 cm)(7 cm)(8.3 cm)(7 cm)®。

M D V(家用变频一拖多)室外机功能规格书M D V（家用变频一拖多）室外机（东芝Two in one压缩机）功能规格书型号：MDV-J140W-511V 5.5编制：日期：审核：日期：会签：日期：在4.9版本基础上修改1、增加制冷时室外机的电子膨胀阀控制。

2、取消制热均油运行程序，但保留制冷运行程序在5.0版本基础上修改1、增加制热时室外机的电子膨胀阀控制，并取消原来的控制。

2、更改室外机除霜时电子膨胀阀控制。

在5.1版本基础上修改1、在5.1版本基础上进行细节修改在5.2版本基础上修改1、在5.2版本基础上进行细节修改在5.3 版本的基础上，功能未作改动，仅修改了通讯。

1、增加机型识别码。

作为机型匹配标识，如果室内机接收到机型不匹配，则室内机报警，不能开启。

2、可以接收32位地址的室内机。

在5.4版本的基础上，修改了室内外通讯部分，当室内外机不匹配时，则显示室内机不匹配故障，详见蓝色字体1、适用范围本功能规格书适用于5匹家用变频一拖多空调系统室外机（1个变频压缩机{BH240X2CS-20KU}+1个定速压缩机{PH420X3CS-8KUC1}）的功能说明。

适用机种： MDV-J120（140）W-5112、冷冻循环图2.1 压缩机采用美芝公司的变频旋转式压缩机以42HZ—120HZ运转，配合定速压缩机的启停，在同一个制冷系统内进行多级能量控制，满足对室内机进行的单独和线性控制。

2.2高低压力开关制冷系统高低压力保护用压力开关2.3高、低压储液罐储存暂时过多的制冷剂2.4油分离器保证系统在不同负荷下压缩机的及时回油2.5 室外机电子膨胀阀EXV制热运行时调节系统过热度，起节流降压用2.6 电磁阀SV1SV1为定速压缩机启动卸载用2.7 电磁阀SV2制热时用，和主四通阀控制一致 28辅助四通阀SV3开定速压缩机时用，控制接在定速压缩机接触器的反向触点上3、控制系统的概况本控制系统的设计采用模块化的设计思路，内机与外机的控制系统的结构采用如下图所示的的主从结构。

变频一拖三(四)空调控制器设计说明书拟制：审核：批准：编号：杭州五海变频电控技术有限公司一、主要技术性能指标1、采用模糊控制完成室温的调节，压缩机采用交流变频压缩机，实行变频控制，变频范围为30-120HZ（根据压缩机定）。

2、电源为220V、50HZ，电压范围150-260V，功率因数＞98%。

3、使用条件：环境温度-15～+55℃，相对湿度45-85%。

4、温度控制精度：±0.5℃。

5、时间误差：小于0.1%。

6、控制器符合GB5956-96、GB7725-96、GB3797-87；印刷线路板符合GB4588.1和GB4588.2；电磁兼容性符合国家有关标准要求。

二、主要功能遥控器1、开关机操作。

2、选择运转方式：自动、制冷、制热、除湿、送风。

3、选择室内机风扇速度：高速、中速、低速、自动风速。

4、设定室内温度：制冷运转时：16℃—30℃，初始值24℃；制热运转时：16℃—30℃，初始值24℃；抽湿运转时：16℃—30℃，初始值24℃；通风运转时：16℃—30℃，初始值24℃；自动运转时：16℃—30℃，初始值24℃；5、自动睡眠方式：按键打开/关闭。

6、选择定时运转：设定1—12小时的开机/关机时间定时器。

7、设定/取消定时运转，设定/取消已定时的定时器。

8、控制风向。

9、高效/节约运行。

室内机室内机可选用壁挂机、柜机、风管机等。

1、五种运转方式：自动、制冷、制热、除湿、送风。

2、定时功能。

3、感测室内温度、室内热交换器盘管温度、内机进口温度、出口温度。

4、时间延迟安全控制：在压缩机停机再启动时要延时3分钟保护。

（初次上电时无时间延迟安全控制）5、室内机风扇速度控制：制冷：高、中、低速；制热：高、中、低、微速。

6、显示：工作状态和故障显示。

7、电子膨胀阀的控制。

8、除湿运转方式。

9、室内热交换器盘管过热保护。

10、制冷运转时室内热交换器防结霜保护。

11、自动运转。

12、控制风向：根据遥控器信号控制风向。

本文部分内容来自网络整理，本司不为其真实性负责，如有异议或侵权请及时联系，本司将立即删除！== 本文为word格式，下载后可方便编辑和修改！ ==海尔中央空调说明书篇一：室内机型号 - 海尔中央空调海尔双变多联四面出风嵌入式空调注：以上参数仅供参考，实际以机器铭牌为准！海尔双变多联四面出风嵌入式空调注：以上参数仅供参考，实际以机器铭牌为准！本技术参数版权所有：中央空调在线 / 本站网络技术支持：虎酋网络http://篇二：海尔中央空调线控器征明海尔中央空调线控器火热征名，期待你的参与！曾经的我们，为了给用户全面的功能体验，全面的按钮设计就是产品的核心，产品型号就是线控器的名称,产品外观如下图；现在的我们，选择给用户最佳的使用体验，设计一款能读懂用户心的控制器，它能自学习你的使用习惯，它有老人、儿童的模式，它还有颠覆的操作界面……产品外观如下图。

它是中央空调控制器，它是互联网的产品；这就是它的外观，我们正为它火热征名，期待你来参与产品命名投票！A. 小黑氪（赋予产品人性化色彩，聪明、懂你）B. 小极氪（赋予产品人性化色彩，并且很萌，易记忆）C. 睿智（聪颖明智，表意积极向上，体现产品本身智能特性）D. 陪伴星（犹如月亮之于地球，时刻相伴，成为你生活中不可或缺的一部分）E. 智控伙伴/精灵（科技与人性的完美结合，更懂你的产品）F. 空气伙伴（易于产生产品功能联想，亲切友好）G. 其他1.请选出你觉得最符合我们产品形象的名字！2.如果你觉得都配不上我们的控制器形象，给出您的建议吧！篇三：海尔中央空调使用寿命价值不菲的家用中央空调到底值不值？鉴于中央空调拥有工作舒适、与装修相交融、漂亮大方等一些传统空调不具备的优势，不少人都期待夏日能够运用中央空调。

但中央空调造价不菲，这使得咱们在采购中央空调的时候分外慎重，常常会情不自禁的关心中央空调到底能用几年，这关系到咱们的购买回报率，那么中央空调能用多久呢，专家介绍：合理使用，各品牌家用中央空调的使用寿命都在15-20年，是传统柜、挂式空调的两倍，海尔中央空调使用寿命最低长达20年以上，高于同类产品其他品牌。

海尔说明书2014版V1.0目录第1章安全预防保养 (3)1.1产品安全警告 (3)1.2使用环境要求 (3)1.3对用户的要求 (3)第2章附件检查 (4)第3章产品图示介绍 (4)3.1端口 (5)3.2信号接入使用介绍 (5)3.3信号连接 (5)3.4电脑信号 (5)3.5DVI信号 (6)3.6HDMI信号 (6)第4章常见故障解决 (7)第5章产品标志及明示 (8)5.1产品污染控制标志 (8)5.2有毒有害物质或元素标识 (8)5.3售后服务体系...........................................................................................................................第1章安全预防保养1.1产品安全警告产品出厂前皆经严格的安全检测，以确保操作安全，防止触电危险。

在产品上和操作手册中，为达到安全使用及保护本设备并确保所有人远离意外事故及伤害，所有的警示字体或标签被突出表示，这些警示的意义如下：警告、任何忽视本警示的不正确的运转或错误的操作可能导致死亡事故或造成对使用者和他人的严重的伤害。

注意、任何忽视本警示的不正确的运转或错误的操作可能造成使用者或他人的伤害或其它部件的损毁。

1.2使用环境要求◆本设备完全按照室内使用来设计，不应在室外使用本设备。

安装设备的室内必须配备空调。

不可在潮湿或大量灰尘的环境中使用本设备。

◆不可阻塞设备内的通风孔，或阻碍设备周围的空气流通。

如果设备的通风孔被堵塞，则设备内的温度会升高从而容易引发火灾。

1.3对用户的要求●屏幕保护膜屏幕保护膜是用来保护显示屏幕，避免屏幕在运输过程中被刮擦。

在安装设备前请拆掉此保护膜。

屏幕表面脏了，请用脱脂棉球或软布擦拭，请勿用酮类材料（如丙酮）直接擦拭。

面板中有液晶材料泄漏，应保持距离避免接触到身体和眼睛。

●遥控器若长期不使用，请将遥控器中的电池取出。

Series 8, Built-in oven, 60 x 60 cm, Stainless steelHBG672BS1BIncluded accessories2 x combination grid, 1 x universal panOptional accessoriesHEZ324000 Inlaid wire shelf for multipurpose pan, HEZ327000 Pizza stone, HEZ617000 Pizza pan, enamelled, HEZ625071 Grill tray, anthracite enamelled, HEZ631070 Baking tray, enamelled,HEZ632070 Multipurpose pan, enamelled, HEZ633001 Lid for professional pan, enamelled, HEZ633070 Professional pan, enamelled, HEZ634000 Baking and roasting grid (standard),HEZ636000 Glass pan, HEZ638170 1 level telescopic rail, full ext, pyro, HEZ638270 2 level telescopic rails, full ext,pyro, HEZ638370 3 level telescopic rails, full ext,pyro, HEZ660050 Cover Strip,HEZ6BCA0 Cookbook, HEZ864000 Glass tray, HEZ9020 Conversion cabinet, HEZ9041 Conversion cabinet, HEZ915001 Glass roasting dish, 5,1 L The built-in oven: you get perfect baking and roasting results.• 4D Hotair: even heat distribution for perfect results – on any level.• TFT display control: easy-to-use thanks to the control ring with full text and symbols.• Pyrolytic self-cleaning: Automatically cleans the oven, just wipe out the ash.• Drop down door with SoftOpen and SoftClose: the oven door opens and closes gently and quietly• Fast pre heatingTechnical DataInstallation type: ......................................................................Built-in Integrated Cleaning system: ..................................................Pyrolytic Min. required niche size for installation (HxWxD): 585-595 x 560-568 x 550 mmDimensions: ........................................................595 x 595 x 548 mm Dimensions of the packed product (HxWxD): .....670 x 680 x 670 mm Control Panel Material: ................................................Stainless steel Door Material: ............................................................................Glass Net weight: ..............................................................................37.7 kg Usable volume of cavity: ...............................................................71 l Cooking method: .....4D Hotair, Defrost, Full width grill, Hot Air-Eco, Conventional heat, Conventional heat ECO, Pizza setting, Hot air grillingOven control: ......................................................................electronic Number of interior lights: .. (1)Length of electrical supply cord: ..........................................120.0 cm EAN code: (4242002881539)Number of cavities (2010/30/EC): (1)Energy efficiency rating: ..................................................................A+ Energy consumption per cycle conventional (2010/30/EC): ........0.87 kWh/cycleEnergy consumption per cycle forced air convection (2010/30/EC):0.69 kWh/cycleEnergy efficiency index (2010/30/EC): .....................................81.2 % Connection rating: ..................................................................3600 W Fuse protection: ...........................................................................16 A Voltage: ...............................................................................220-240 V Frequency: ...........................................................................50; 60 Hz Plug type: .....................no plug (electrical connection by electrician) Included accessories: .............2 x combination grid, 1 x universal panSeries 8, Built-in oven, 60 x 60 cm, Stainless steelHBG672BS1BThe built-in oven: you get perfect baking and roasting results.Key Information- 2.5“-TFT colour and text display with direct select buttons- Drop down door, SoftClose, SoftOpen- Digital temperature display with proposal- Actual temperature display Heating-up indicator- Automatic programmes- Pyrolytic self-cleaning function- Pyrolytic proof baking trayDesign- Bosch control wheel- Straight bar handleFeatures- Electronic clock timer- Main on/off switch- 1 interior light- Interior halogen light, Light on/off when oven door opened/closed - Light on/off when oven door opened/closed- Control panel lock- Automatic safety switch off Residual heat indicator Start button Door contact switch- Cavity inner surface: enamel anthracite- Removable wire shelf support rails- 5 shelf positions- Full glass inner door- Info buttonProgrammes/functions- Oven with 8 cooking functions:, 8 cooking functions: heating methods: 4D Hotair, Hotair Gentle, conventional top and bottom heat, conventional heat Gentle, Hotair grilling, full width variable grill, pizza function, defrost- Fast pre-heating functionPerformance/technical information- Temperature range 30 °C - 275 °C- Cavity volume: 71 litre capacity- Integral cooling fan- Stainless-steel fan- 120 cm Cable length- Total connected load electric: 3.6 KW- Appliance dimension (hxwxd): 595 mm x 595 mm x 548 mm- Niche dimension (hxwxd): 585 mm - 595 mm x 560 mm - 568 mm x 550 mm- Please refer to the dimensions provided in the installation manual - Maximum window temperature 30° C- Energy efficiency rating (acc. EU Nr. 65/2014): A+- Energy consumption per cycle in conventional mode:81.2- Energy consumption per cycle in fan-forced convection mode:0.69 kwh - Number of cavities: 1 Cavity volume:71 litre capacity Standard accessories- Available as an additional accessory- 2 x combination grid, 1 x universal panSeries 8, Built-in oven, 60 x 60 cm,Stainless steel HBG672BS1B。

设计施工说明一．方案概述：本建筑物建筑面积约为：000m²，空调使用面积约为：000m² .根据建筑物的实际情况和甲方的要求，为减少室外机个数以减少安装占地面积和运转费用，同时保证用户使用效果，本方案采用海尔智能变频家用MRV一拖多中央空调系统为主要机型。

二、设计依据1甲方提供各空调房间建筑面积2《采暖通风与空气调节设计规范》（GBJ19-87）3《通风与空调工程及验收规范》（GBJ242-2002）三、设计范围及要求1、要求符合国家相关法规。

2、科技含量高、控制方便、耐用寿命长、噪音低、环保、体积小、重量轻，安装方便、组合灵活、节能省电、运行费用低、维修方便。

四、设计参数a）室外气象参数：夏季大气压937Kpa室外空气调节计算干球温度36.5℃室外空气调节湿球温度27.3℃冬季大气压991Kpa室外空气调节通风温度7℃室外空气调节相对湿度82%b）室内设计参数：夏季：温度：24～26±2℃冬季：温度：18～22±2℃根据房间的不同用途结合当地地区的气候特点,根据空气调节设计手册选取当地的设计参数，再根据房间的空调面积和空调环境的功能进行冷负荷的计算。

利用冷负荷系数法计算出房间的所需制冷量。

根据房间所需最大冷负荷的峰值和房间同时使用系数，共同决定各房间所选空调的制冷容量及型号。

另外，还主要考虑了空调在制冷时的各修正系数，分别为：1、室内空气湿球温度能力修正；2、室外空气干球温度能力修正；3、风量变化率的影响能力修正；4、管长、落差对能力影响的修正；5、室内机容量能力修正。

该工程平均冷负荷指标为000W/m2，平均采暖负荷指标为000W/m2。

该类型的空调与冷水机组等空调机组相比，主要有以下特点：1、室外机安装方便，占地少：海尔家用中央空调系统室外机尺寸为：960*380*1225（长*宽*高），占地小，节省了宝贵的建筑空间。

2、海尔家用中央空调系统在管路上用铜管走冷媒，相对于风冷冷水系统的以水为载体的管路，不仅占用空间少而且便于维修、安全性也要大得多。

SuperPole™SuperBar™SuperTrapeze™SP-S SP-HDSPB-SSPB-HDSPB-AK(DC100 - RevE)STP-SSTP-AK89111012131457346212HW318HW323HW302202122232829301724252726182315181917163HW100SP102HW320HW300HW320HW112+++SP-SSPB-SSTP-SSP-SSPB-SSTP-SSP-HDSPB-HD12345 678910 42"/51mm6"/154mm3"/76mm10"/254mm ABC D EABCEDFACEBD45612351234 56 6HW318HW323HW30278910+(2-5)111271234HW100 56889101112HW100984"2134mm3+4567101289101111Ø 5" / 127mm 20"508mm93-99"2362-2515mm2.50" / 64mm1.0625" / 27mm8"203mm20"508mmØ 1.50" / 38.1mmFE / PVC / UHMW SP-P 13lbs / 5.9kgFE / NBR SP4034lbs / 1.8kgFE / NBR SP4021lbs / 0.4kg1216"406mm8"203mmØ 2.50"64mmØ 2"51mmØ 1.50"38.1mm3.875"98mm17"432mm8"203mm3-29"76-737mm12.25"311mm13.5"343mmPOMFEFE / PA / LDPE FE / PVC SP102.05lbs / .02kgFE / PVC SP4044.20lbs / 1.91kgSP4085.25lbs / 2.38kgSP411.85lbs / .39kgSP4092.05lbs / .93kgSUPERPOLE (SP-S)93-99"2362-2515mm 93-99"2362-2515mm 100-120"2540-3048mm 121-140"3073-3556mm < 93"2362mmSUPERBAR300lbs / 136kg450lbs / 205kg 300lbs / 136kg 300lbs / 136kg 300lbs / 136kgMAXANGLED CEILING PLATEUNI-FIT EXTENDERCEILING PLATE EXTENDERSUPER-TRAPEZESUPERPOLE HEAVY DUTY (SP-HD)UNI-FITEXTENDER (SP-UF)SUPERPOLEULTRA (SP-ULTRA)SUPERPOLE CUSTOM (SP-CUSTOM)SUPERPOLE CEILING PLATE EXTENDER (SP-CPE)SUPERPOLE ANGLED CEILING PLATE (SP-ACP)13OVERVIEWThank you for choosing the SuperPole System from HealthCraft. Please read and understand the instructions in this manual; keep manual for future reference. It is your responsibility to see that your SuperPole System is properly assembled, installed, and cared for. Failure to follow instructions in this manual could result in serious injury or death. If you are not equipped to undertake the outlined work, we would recommend that you have your SuperPole System installed by a qualified contractor.The SuperPole System is intended for moderate vertical load bearing to provide sitting and standing support for people with reduced mobility. The floor to ceiling range and maximum user weight dependent on model (see Page 13 for details and product / accessory compatibility chart). Product is not intended to support full body weight. The SuperPole System is not to be used in any other way than described above.The SuperPole is a high quality, commercial grade floor to ceiling safety pole. The SuperPole must be installed between a structural floor and ceiling by turning a jackscrew at the bottom of the pole. The pressure created by the jackscrew is strong enough for the SuperPole to support the user, yet it does not require drilling holes into the floor or ceiling. This is ideal for relocating or removing the pole. NOTE: The top plate has two holes that may be used to fix the plate directly to the ceiling joist if necessary. See Page 4 for details.The SuperBar is a high quality, commercial grade pivoting and locking horizontal bar that connects to the SuperPole (floor to ceiling safety pole). The horizontal bar can be lifted, pivoted and lowered to the next locking position around the SuperPole. In any of the 8 lowered position (every 45 degrees) the SuperBar can be used to support the user. It is important to set proper height and orientation of the SuperBar to optimize the user’s range of motion.The SuperTrapeze is a high quality, commercial grade over-bed trapeze that connects to the SuperPole (floor to ceiling safety pole). The SuperTrapeze handle features two offset ladder rungs to allow for improved use of arm strength and increased comfort. Additionally, it can hook around the pole to store out of the way when not in use. The support arm has an adjustable strap that attaches to the trapeze handle. It is important to set proper height and orientation of the SuperTrapeze to optimize the user’s range of motion.WARNING - PATIENT ENTRAPMENT (see additional guidelines)The potential risk of entrapment (limb, neck, head, torso) between the pole and adjacent item (i.e. bed, toilet, etc.) can be reduced or avoided by the following strategies:1. Situate the pole at a distance that is considerably smaller or larger than that which could result in entrapment.2. Consider situations that could change with time or usage such as mattress compression, patient movement, bed position changes due to electrically powered beds, etc.3. Realize that this product is not intended as a physical constraint or barrier to exiting the bed.LIMITED LIFETIME WARRANTYProducts are covered by a limited lifetime warranty against defects in materials and workmanship for the original purchaser. Warranty excludes products that have been damaged through misuse, accidental damage, alteration, normal wear and tear, wood material and stain, or the use of corrosive or abrasive cleaning products.Buyer hereby indemnifies, agrees to hold harmless and defend HealthCraft Products Inc. from and against any and all liabilities, claims, (founded and unfounded), losses, damages, costs and expenses (including without limitation consequential damages and reasonable professional fees) resulting from buyers specification, application, or improper use of goods described hereon; buyers omission or neglect. HealthCraft Products Inc. does not assume any liability for damage resulting from services performed by others or faulty installation, misuse or misapplication of goods sold by HealthCraft Products Inc. HealthCraft Products Inc. shall not be liable for prospective profits or special, indirect, or consequential damages, or for the cost of any corrective work done without HealthCraft Products Inc. prior approval. HealthCraft Products Inc. total liability hereunder shall in no event exceed the purchase price of the goods specified hereon. Specifications subject to change without notice.DELIVERY CONTENTS - SUPERPOLE FIGURE A.SP400 - POLE ASSEMBLY1. Pole2. Pole Grip, 20" length3. Cover Sleeve (with warning label)4. Threaded Collar5. Jam Nut6. Extension Screw7. Plastic WasherDELIVERY CONTENTS - SUPERBAR FIGURE B.SP404 - T-BAR ASSEMBLY15. T-Bar Weldment16. GripSP411 - COLLAR ASSEMBLY17. Spring Ring (with warning label)18. 5/16-24 Set Screw (x3)19. Castellated CollarSP403 - TOP PLATE ASSEMBLY8. Top Plate Rubber9. Top Plate10. Nylon Washer11. Cotter Pin12. Clevis PinSP402 - BASE PLATE ASSEMBLY13. Base Plate14. Base Plate RubberHARDWARE20. #8-32 Set Screw (x2)21. Pivot Bushing (x2)22. 3/32"Hex Key23. 5/32" Hex Key14DELIVERY CONTENTS - SUPERTRAPEZE FIGURE C. SP408 - SUPPORT ARM24. Support Arm Weldment25. Rectangular Plug26. Plastic Buckle27. Safety StrapSP409 - TRAPEZE ASSEMBLY28. Trapeze Handle29. Top Grip, 6" length30. Bottom Grip, 10" lengthINSTALLATION WARNINGS FIGURE D.1. Use caution while maneuvering pole during installation.2. Standard pole can be installed directly under 1 ceiling joist.3. Standard pole can be installed directly under 2 ceiling joists.4. Heavy Duty (HD) pole must be secured to ceiling joist (s).5. If subject to heavy usage, pole must be secured to ceiling joist (s).6. CAUTION - Damage may occur if extension screw is overtightened.7. CAUTION - Do not install if the structure above ceiling is unknown.8.CAUTION - Do not install on loose floor coverings.9. CAUTION - Do not install in rooms with radiant ceiling heat.10. CAUTION - Do not install on angled ceilings.SUPERPOLE PLACEMENT FIGURE E. 1. BEDROOM - Locate pole adjacent to waistline, and as close to bed as possible while allowing clearance for bed coverings.2. BATHTUB ONLY - Locate pole base against tub, approximately half way along its length3. SEATING (TOILET or CHAIR) - To provide clearance when standing, locate pole 3-10" / 76mm-254mm forward of the knees, and 2-6" /51mm-154mm to the side of knees when sitting.SUGGESTED SUPERBAR POSITIONS FIGURE E.4. BEDROOMA = side support / out of the wayB = in-bed supportC = sitting supportD = standing supportE = transfer support towalker / wheelchairSUPERPOLE INSTALLATION INSTRUCTIONS FIGURE F.1. On a flat horizontal surface, place top plate onto pole.2. Align holes and install clevis pin with washer on opposite side.3. Install cotter pin into clevis pin.4. Place base plate on floor at intended location, and tilt pole.5. When upright, install the pole into the base plate hole.6. Insert shaft of screwdriver thru drive hole of extension screw.7. Hold pole and turn screwdriver clockwise to raise pole.8. Top plate must contact ceiling squarely.9. Continue turning extension screw approx 2-5 turns until pole is secure.10. Turn jam nut until it is tight against bottom of pole.11. Turn both jam nut and extension screw together to jam tight.12. Remove screwdriver and lower cover sleeve to conceal screw.SUPERBAR INSTALLATION INSTRUCTIONS FIGURE G.1. Slide spring ring upwards on castellated collar to expose 3 set screws.2. Back off 3 cone point set screws with hex key so castellated collar canslide onto pole without set screws contacting pole.3. Install pivot bushing into T-bar assembly.4. Align hole and install screw with hex key.5. Remove cover sleeve from bottom of pole.6. Slide items onto bottom of pole (note order and orientation): T-Barassembly with installed pivot bushing top/first, spring ring withcastellated collar, pivot bushing and cover sleeve.7. Install SuperPole as per instructions Page 6-7.8. Install castellated collar to pole by tightening 3 set screws with hex key.The set screws MUST be tightened until the back of the screw is flushwith the collar or injury may result.9. Slide spring ring downwards on the castellated collar to retain set screws.10. Lower T-bar assembly onto castellated collar.11. Install bottom pivot bushing into T-bar assembly.12. Align hole and install screw with hex key.SUPERTRAPEZE INSTALLATION INSTRUCTIONS FIGURE H.1. Slide support arm onto top of pole with strap hook facing towards grip.Rest support arm on top of grip.2. Install SuperPole as per instructions Page 6-7.3. Rotate support arm over bed.4. Hold the trapeze handle under the support arm, such that the shorter rail of the handle is closest to the head of the bed.5. Rotate the strap 180° and slide onto the shorter rail of the trapezehandle until it reaches the top bend of the trapeze.6. Position support arm such that the trapeze handle hangs directly overthe user’s hands (on thighs) when they lay on the bed.7. Raise support arm approx 84"/2134mm from floor to top of support arm.8. Slide spring ring upwards on support arm to expose threaded holes.9. Install support arm to pole by tightening 3 set screws with hex key. Theset screws MUST be tightened until the back of the screw is flush withthe collar or injury may result.10. Slide spring ring downwards on the castellated collar to retain set screws.11. Adjust length of strap such that the user can comfortably grasp thebottom rail of the trapeze handle when laying down.TECHNICAL DATASee Figure I.PRODUCT COMPATIBILITY CHARTSee Figure J.PRODUCT USAGESee Figure I.HARDWARE18. 5/16-24 Set Screw (x4)23. 5/32" Hex Key5.BATHROOM or6.SITTINGA = side support / out of the wayB = standing or transfer supportC = standing supportD = standing or transfer supportE = standing or transfer supportF = transfer support in/out of bathtub1520。

本文部分内容来自网络整理，本司不为其真实性负责，如有异议或侵权请及时联系，本司将立即删除！== 本文为word格式，下载后可方便编辑和修改！ ==海尔中央空调说明书篇一：室内机型号 - 海尔中央空调海尔双变多联四面出风嵌入式空调注：以上参数仅供参考，实际以机器铭牌为准！海尔双变多联四面出风嵌入式空调注：以上参数仅供参考，实际以机器铭牌为准！本技术参数版权所有：中央空调在线 / 本站网络技术支持：虎酋网络http://篇二：海尔中央空调线控器征明海尔中央空调线控器火热征名，期待你的参与！曾经的我们，为了给用户全面的功能体验，全面的按钮设计就是产品的核心，产品型号就是线控器的名称,产品外观如下图；现在的我们，选择给用户最佳的使用体验，设计一款能读懂用户心的控制器，它能自学习你的使用习惯，它有老人、儿童的模式，它还有颠覆的操作界面……产品外观如下图。

它是中央空调控制器，它是互联网的产品；这就是它的外观，我们正为它火热征名，期待你来参与产品命名投票！A. 小黑氪（赋予产品人性化色彩，聪明、懂你）B. 小极氪（赋予产品人性化色彩，并且很萌，易记忆）C. 睿智（聪颖明智，表意积极向上，体现产品本身智能特性）D. 陪伴星（犹如月亮之于地球，时刻相伴，成为你生活中不可或缺的一部分）E. 智控伙伴/精灵（科技与人性的完美结合，更懂你的产品）F. 空气伙伴（易于产生产品功能联想，亲切友好）G. 其他1.请选出你觉得最符合我们产品形象的名字！2.如果你觉得都配不上我们的控制器形象，给出您的建议吧！篇三：海尔中央空调使用寿命价值不菲的家用中央空调到底值不值？鉴于中央空调拥有工作舒适、与装修相交融、漂亮大方等一些传统空调不具备的优势，不少人都期待夏日能够运用中央空调。

但中央空调造价不菲，这使得咱们在采购中央空调的时候分外慎重，常常会情不自禁的关心中央空调到底能用几年，这关系到咱们的购买回报率，那么中央空调能用多久呢，专家介绍：合理使用，各品牌家用中央空调的使用寿命都在15-20年，是传统柜、挂式空调的两倍，海尔中央空调使用寿命最低长达20年以上，高于同类产品其他品牌。

HD 1500P E C IF I C AT I O N SModel Number: 8233Part Number:108384Load Capacity: 1500 lbs.Load Size: 22 Cubic FeetOverall Dimensions: 98" x 54" x 31"Overall Weight: 127 lbs.Body Dimensions: 72" x 40" x 18"Tire Size: 18 x 8.5Instruction P/N 102655-BNOTICE:Once used, this trailer cannot be returned to the store. If you have a warranty claim, please read and follow Warranty Information directions below.WARRANTY INFORMATIONCLAM OUTDOORS INC. warrants to the original retail purchaser its product be free from manufacturers defects for (3) years from the date of the original purchase. Clam Outdoors Inc will replace or repair any part found defective within the (3) years time limit. All parts must be returned to Clam Outdoors Inc. Before returning any parts, you must first call or write and acquire a return authorization. All returns must be returned postage-prepaid and include the original cash register receipt (date and purchase price).To submit a warranty claim request, please use one of the following methods:▪ Customer Service Hrs: 9am to 4pm, Monday – Friday Central Standard Time▪ Clam CorporationAttn: Customer Service – Warranty Department12135 Brockton LaneRogers, MN 55369▪ Phone: 763-231-4120▪ Fax: 763-231-4121▪ Email: ****************************▪ Website: The warranty does not apply to any Polar Trailer which has been subjected to an accident, improper installation, modification, adjustment, repair, misuse, misapplication, neglect, including but not limited to improper maintenance, or use of unauthorized parts or attachments.LIMITATION OF LIABILITYIt is expressly understood that Clam Outdoors Inc. liability for its products, whether due to breach of warranty, negligence, strict liability, or otherwise, is limited to the repair of the product as stated above. Clam Outdoor Inc. is not liable for any injury, loss, damage, or expense, whether direct or consequential, including but not limited to loss of use, income, profit, or damage to material arising in connection with the sale, installation, use of, inability to use, or the repair or replacement of Clam Outdoor Inc. products. Clam Outdoor Inc. reserves the right to make alterations ormod ifi cat io ns to pr od uct s a lr ea d y in s er vi c e.THE FOLLOWING STATEMENTS ARE SUGGESTIONS AND DO NOT SUPERCEDE OR ELIMINATE ANY TOWING AND SAFETY INSTRUCTIONS LISTED IN ANY OWNERS MANUALS FOR ANY PRODUCT BEING USED FOR THE PURPOSE OF TOWING ANY CLAM OUTDOORS INC. PRODUCTS. ALWAYS REFER TO THE TOWING VEHICLES MANUAL, GUIDELINES OR INSTRUCTIONS.Transporting Loads Safely•Stopping distance increases with speed and weight of towed load. Travel slowly and allow extra time and distance to stop.•Total towed weight must not exceed limits specified in towing vehicle operator’s manual. •Excessive towed load can cause loss of traction and loss of control on slopes. Reduce towed weight when operating on slopes.•Never allow children or others in or on towed equipment.•Use only approved hitches. Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the approved hitch point.•Follow the manufacturer’s recommendations for weight limits for towed equipment and towing on slopes.•Do not turn sharply. Use additional caution when turning or operating under adverse surface conditions.Use care when reversing.•Do not shift to neutral and coast downhillProtect Bystanders•Keep bystanders away when you operate a towed attachment.•Before you back machine and attachment, look carefully behind attachment for bystanders.K eep Riders off Towed Attachment•Keep riders off of a towed attachment.•Riders on a towed attachment are subject to injury, such as being struck by objects and being thrown off the attachment during sudden starts, stops and turns.•Riders obstruct the operator’s view, resulting in the attachment being used in an unsafe manner. •Keep riders off of the hitch bracket or trailer tongue.Disconnecting Towed Attachment• Unload trailer.• Stop attachment on level ground. • Stop machine engine. • Lock machine park brake. •Block attachment wheelsLock Pin Hole• A hole has been provided in the Latch Plateto lock the Latch Mechanism if desired.Assembled View Attach the Tires, PN 10258 and the U-Frame, PN 101787 to the assembly fromStep 1.STE STEP 4Increase your Trailer capacity with the Side Rail Kit, PN 108272. Cover the Trailer’s load with the Travel Cover, PN 108266.These can be viewed and purchased along with other exciting and innovative products by visiting our website at 。

海尔H-MRV家用一拖多维修手册之调试4．安装4.1设定内机地址内机设定地址时，机号代码应在0－7之间且不重复，外机无需改动。

4.4.3 以室外机为单位将连接的全部室内机组置于制冷试运行方式的功能.以室外机为单位将连接的全部室内机组置于制热试运行方式的功能.(运行顺序)<注1>进出风温差大致标准进风“制冷”时,最少运行30min后,空调进出风干球温差在10℃以上为正常（最大频率运行时）。

置于“制热”时，最少运行30min后，空调进出风干球温差在18℃以上为正常（最大频率运行时）。

<注2>运行电流值的大致标准制冷／制热均在标定电流值的＋15％以内为正常（最大频率运行时）电流值会因运行条件不同而有以下差异：大于标准电流时?低于标准电流时（1）室内、外温度高（1）室内、外温度低（2）室外机散热不良（制冷时）（2）制冷剂气体泄漏（制冷剂不足）<注3>运行压力的大致标准一般标准如下：运转开始15min后的值（温度为干球温度）因运行条件变化引起高压、低压变化的趋势室内温度上升—高压、低压上升?室内温度上升—高压、低压上升室内温度下降—高压、低压下降制热?室内温度下降—高压、低压下降制冷?室外温度上升—高压、低压上升?室外温度上升—高压、低压上升?室外温度下降—高压、低压下降?室外温度下降—高压、低压下降5.制冷系统维修资料及电控系统维修资料5.1室内机故障显示表5.2室外机故障显示表A、线控器显示E1时，可检查室内机主板LED1或室外机主板LED1(KR-80W/(BP))、室外机主板LED（ALARMA或ALARMB（KR-120W/（BP）B、遥控接收器室外机故障表示方法C、KR-110W/（BP）、KR-140W/（BP）、KR-140W/（S）（BP）、KR-280W/（BP）外机电脑板LED灯显示故障代码出现故障时，室外机电脑板上的LED（ALARM）闪烁，闪烁的次数与检修代码相同。