外文文献 JSP 毕业设计

Combining JSP and ServletsThe technology of JSP and Servlet is the most important technology which use Java technology to exploit request of server, and it is also the standard which exploit business application .Java developers prefer to use it for a variety of reasons, one of which is already familiar with the Java language for the development of this technology are easy to learn Java to the other is "a preparation, run everywhere" to bring the concept of Web applications, To achieve a "one-prepared everywhere realized." And more importantly, if followed some of the principles of good design, it can be said of separating and content to create high-quality, reusable, easy to maintain and modify the application. For example, if the document in HTML embedded Java code too much (script), will lead the developed application is extremely complex, difficult to read, it is not easy reuse, but also for future maintenance and modification will also cause difficulties. In fact, CSDN the JSP / Servlet forum, can often see some questions, the code is very long, can logic is not very clear, a large number of HTML and Java code mixed together. This is the random development of the defects.Early dynamic pages mainly CGI (Common Gateway Interface, public Gateway Interface) technology, you can use different languages of the CGI programs, such as VB, C / C + + or Delphi, and so on. Though the technology of CGI is developed and powerful, because of difficulties in programming, and low efficiency, modify complex shortcomings,it is gradually being replaced by the trend. Of all the new technology, JSP / Servlet with more efficient and easy to program, more powerful, more secure and has a good portability, they have been many people believe that the future is the most dynamic site of the future development of technology.Similar to CGI, Servlet support request / response model. When a customer submit a request to the server, the server presented the request Servlet, Servlet responsible for handling requests and generate a response, and then gave the server, and then from the server sent to the customer. And the CGI is different, Servlet not generate a new process, but with HTTP Server at the same process. It threads through the use of technology, reduce the server costs. Servlet handling of the request process is this: When received from the client's request, calling service methods, the method of Servlet arrival of the first judgement is what type of request (GET / POST / HEAD…), then calls the appropriate treatment (DoGet / doPos t / doHead…) and generate a response.Although such a complex, in fact, simply said to Servlet is a Java class. And the general category of the difference is that this type operating in a Servlet container, which can provide session management and targeted life-cycle management. So that when you use the Servlet, you can get all the benefits of the Java platform, including the safety of the management, use JDBC access the database and cross-platform capability. Moreover, Servlet using thread, and can develop more efficient Web applications.JSP technology is a key J2EE technology, it at a higher level of abstraction of a Servlet.It allows conventional static and dynamic HTML content generated by combining an HTML page looks like, but as a Servlet to run. There are many commercial application server support JSP technology, such as BEA WebLogic, IBM WebSphere, JRun, and so on. JSP and Servlet use more than simple. If you have a JSP support for Web servers, and a JSP document, you can put it Fangdao any static HTML files can be placed, do not have to compile, do not have to pack, do not have to ClassPath settings, you can visit as ordinary Web It did visit, the server will automatically help you to do other work.JSP document looks like an ordinary static HTML document, but inside contains a number of Java code. It uses. Jsp the suffix, used to tell the server this document in need of special treatment. When we visit a JSP page, the document will first be translated into a JSP engine Java source files, is actually a Servlet, and compiler, and then, like other Servlet, from Servlet engine to handle. Servlet engine of this type loading, handling requests from customers, and the results returned to the customer, as shown below:Figure 1: Calling the process of JSP pagesAfter another visit this page to the customer, as long as the paper there have been no changes, JSP engine has been loaded directly call the Servlet. If you have already been modified, it will be once again the implementation of the above process, translate, compile and load. In fact, this is the so-called "first person to punishment." Because when the first visit to the implementation of a series of the above process, so will spend some time after such a visit would not.Java servlets offer a powerful API that provides access to all the information about the request, the session, and the application. combining JSP with servlets lets you clearly separate the application logic from the presentation of the application; in other words, it lets you use the most appropriate component type for the roles of Model, View and Controller.Servlets, Filters, and ListenersA servlet is a Java class that extends a server with functionality for processing a request and producing a response. It's implemented using the classes and interfaces defined by the Servlet API. The API consists of two packages: the javax.servlet package contains classes and interfaces that are protocol-independent, while the javax.servlet.http package provides HTTP-specific extensions and utility classes.What makes a servlet a servlet is that the class implements an interface named javax.servlet.Servlet, either directly or by extending one of the support classes. This interface defines the methods used by the web container to manage and interact with theservlet. A servlet for processing HTTP requests typically extends the javax.servlet.http.HttpServlet class. This class implements the Servlet interface and provides additional methods suitable for HTTP processing.Servlet LifecycleThe web container manages all aspects of the servlet's lifecycle. It creates an instance of the servlet class when needed, passes requests to the instance for processing, and eventually removes the instance. For an HttpServlet, the container calls the following methods at the appropriate times in the servlet lifecycle.Besides the doGet( ) and doPost( ) methods, there are methods corresponding to the other HTTP methods: doDelete( ), doHead( ), doOptions( ), doPut( ), and doTrace( ). Typically you don't implement these methods; the HttpServlet class already takes care of HEAD, OPTIONS, and TRACE requests in a way that's suitable for most servlets, and the DELETE and PUT HTTP methods are rarely used in a web application.It's important to realize that the container creates only one instance of each servlet. This means that the servlet must be thread safe -- able to handle multiple requests at the same time, each executing as a separate thread through the servlet code. Without getting lost in details, you satisfy this requirement with regards to instance variables if you modify the referenced objects only in the init( ) and destroy( ) methods, and just read them in the request processing methods.Compiling and Installing a ServletTo compile a servlet, you must first ensure that you have the JAR file containing all Servlet API classes in the CLASSPATH environment variable. The JAR file is distributed with all web containers. Tomcat includes it in a file called servlet.jar, located in the common/lib directory. On a Windows platform, you include the JAR file in the CLASSPATH.. Reading a RequestOne of the arguments passed to the doGet( ) and doPost( ) methods is an object that implements the HttpServletRequest interface. This interface defines methods that provide access to a wealth of information about the request.Generating a ResponseBesides the request object, the container passes an object that implements the HttpServletResponse interface as an argument to the doGet( ) and doPost( ) methods. This interface defines methods for getting a writer or stream for the response body. It also defines methods for setting the response status code and headers.Using Filters and ListenersThe servlet specification defines two component types beside servlets: filters and listeners. These two types were introduced in the Servlet 2.3 specification, so if you're using a container that doesn't yet support this version of the specification, I'm afraid you'reout of luck.FiltersA filter is a component that can intercept a request targeted for a servlet, JSP page, or static page, as well as the response before it's sent to the client. This makes it easy to centralize tasks that apply to all requests, such as access control, logging, and charging for the content or the services offered by the application. A filter has full access to the body and headers of the request and response, so it can also perform various transformations. One example is compressing the response body if the Accept-Language request header indicates that the client can handle a compressed response.A filter can be applied to either a specific servlet or to all requests matching a URL pattern, such as URLs starting with the same path elements or having the same extension. ListenersListeners allow your application to react to certain events. Prior to Servlet 2.3, you could handle only session attribute binding events (triggered when an object was added or removed from a session). You could do this by letting the object saved as a sessionattribute(using the HttpSession.setAttribute() method)implement the HttpSessionBindingListener interface. With the new interfaces introduced in the 2.3 version of the specification, you can create listeners for servlet context and session lifecycle events as well as session activation and passivation events (used by a container that temporarily saves session state to disk or migrates a session to another server). A newsession attribute event listener also makes it possible to deal with attribute binding events for all sessions in one place, instead of placing individual listener objects in each session.The new types of listeners follow the standard Java event model. In other words, a listener is a class that implements one or more of the listener interfaces. The interfaces define methods that correspond to events. The listener class is registered with the container when the application starts, and the container then calls the event methods at the appropriate times.Initializing Shared Resources Using a ListenerBeans like this typically need to be initialized before they can be used. For instance, they may need a reference to a database or some other external data source and may create an initial information cache in memory to provide fast access even to the first request for data. You can include code for initialization of the shared resources in the servlet and JSP pages that need them, but a more modular approach is to place all this code in one place and let the other parts of the application work on the assumption that the resources are already initialized and available. An application lifecycle listener is a perfect tool for this type of resource initialization. This type of listener implements the javax.servlet.ServletContextListener interface, with methods called by the container when the application starts and when it shuts down.Picking the Right Component Type for Each TaskThe Project Billboard application introduced is a fairly complex application. Half thepages are pure controller and business logic processing, it accesses a database to authenticate users, and most pages require access control. In real life, it would likely contain even more pages, for instance, pages for access to a shared document archive, time schedules, and a set of pages for administration. As the application evolves, it may become hard to maintain as a pure JSP application. It's easy to forget to include the access control code in new pages.This is clearly an application that can benefit from using a combination of JSP pages and the component types defined by the servlet specification for the MVC roles. Let's look at the main requirements and see how we can map them to appropriate component types:●Database access should be abstracted, to avoid knowledge of a specific dataschema or database engine in more than one part of the application: beans in therole of Model can be used to accomplish this.●The database access beans must be made available to all other parts of theapplication when it starts: an application lifecycle event listener is the perfectcomponent type for this task.●Only authenticated users must be allowed to use the application: a filter canperform access control to satisfy this requirement.●Request processing is best done with Java code: a servlet, acting as the Controller,fits the bill.●It must be easy to change the presentation: this is where JSP shines, acting as theView.Adding servlets, listeners, and filters to the mix minimizes the need for complex logic in the JSP pages. Placing all this code in Java classes instead makes it possible to use a regular Java compiler and debugger to fix potential problems.Centralized Request Processing Using a ServletWith a servlet as the common entry point for all application requests, you gain control over the page flow of the application. The servlet can decide which type of response to generate depending on the outcome of the requested action, such as returning a common error page for all requests that fail, or different responses depending on the type of client making the request. With the help from some utility classes, it can also provide services such as input validation, I18N preparations, and in general, encourage a more streamlined approach to request handling.When you use a servlet as a Controller, you must deal with the following basic requirements:●All requests for processing must be passed to the single Controller servlet.●The servlet must be able to distinguish requests for different types of processing.Here are other features you will want support for, even though they may not be requirements for all applications:● A strategy for extending the application to support new types of processingA mechanism for changing the page flow of the application without modifyingcode.Mapping Application Requests to the ServletThe first requirement for using a Controller servlet is that all requests must pass through it. This can be satisfied in many ways. If you have played around a bit with servlets previously, you're probably used to invoking a servlet with a URI that starts with /myApp/servlet. This is a convention introduced by Suns Java Web Server (JWS), the first product to support servlets before the API was standardized. Most servlet containers support this convention today, even though it's not formally defined in the servlet specification.将Servlet和JSP组合使用Servlet和JSP技术是用Java开发服务器端应用的主要技术，是开发商务应用表示端的标准。

中英文资料对照外文翻译文献JSP及其WEB技术. 1 JSP简介JSP（JavaServer Pages）是一种基于Java的脚本技术。

是由Sun Microsystems 公司倡导、许多公司参与一起建立的一种动态网页技术标准。

JSP技术有点类似ASP 技术，它是在传统的网页HTML文件(*.htm,*.html)中插入Java程序段(Scriptlet)和JSP标记(tag)，从而形成JSP文件(*.jsp)。

用JSP开发的Web应用是跨平台的，即能在Linux下运行，也能在其他操作系统上运行。

在JSP 的众多优点之中，其中之一是它能将 HTML 编码从 Web 页面的业务逻辑中有效地分离出来。

用 JSP 访问可重用的组件，如 Servlet、JavaBean 和基于 Java 的 Web 应用程序。

JSP 还支持在Web 页面中直接嵌入 Java 代码。

可用两种方法访问 JSP 文件：浏览器发送 JSP 文件请求、发送至 Servlet 的请求。

JSP技术使用Java编程语言编写类XML的tags 和scriptlets，来封装产生动态网页的处理逻辑。

网页还能通过tags和scriptlets 访问存在于服务端的资源的应用逻辑。

JSP将网页逻辑与网页设计和显示分离，支持可重用的基于组件的设计，使基于Web的应用程序的开发变得迅速和容易。

Web服务器在遇到访问JSP网页的请求时，首先执行其中的程序段，然后将执行结果连同JSP文件中的HTML代码一起返回给客户。

插入的Java程序段可以操作数据库、重新定向网页等，以实现建立动态网页所需要的功能。

JSP与Java Servlet一样，是在服务器端执行的，通常返回该客户端的就是一个HTML文本，因此客户端只要有浏览器就能浏览。

JSP页面由HTML代码和嵌入其中的Java代码所组成。

服务器在页面被客户端请求以后对这些Java代码进行处理，然后将生成的HTML页面返回给客户端的浏览器。

附录Ⅰ英文资料翻译英文原文JSP Application FrameworksWhat are application frameworks:A framework is a reusable, semi-complete application that can be specialized to produce custom applications [Johnson]. Like people, software applications are more alike than they are different. They run on the same computers, expect input from the same devices, output to the same displays, and save data to the same hard disks. Developers working on conventional desktop applications are accustomed to toolkits and development environments that leverage the sameness between applications. Application frameworks build on this common ground to provide developers with a reusable structure that can serve as the foundation for their own products.A framework provides developers with a set of backbone components that have the following characteristics:1. They are known to work well in other applications.2. They are ready to use with the next project.3. They can also be used by other teams in the organization.Frameworks are the classic build-versus-buy proposition. If you build it, you will understand it when you are done—but how long will it be before you can roll your own? If you buy it, you will have to climb the learning curve—and how long is that going to take? There is no right answer here, but most observers would agree that frameworks such as Struts provide a significant return on investment compared to starting from scratch, especially for larger projects.Other types of frameworks:The idea of a framework applies not only to applications but to application components as well. Throughout this article, we introduce other types of frameworks that you can use with Struts. These include the Lucene search engine, the Scaffold toolkit, the Struts validator, and the Tiles tag library. Like application frameworks, these tools provide semi-complete versions of a subsystem that can be specialized to provide a custom component.Some frameworks have been linked to a proprietary development environment. This is not the case with Struts or any of the other frameworks shown in this book. You can use any development environment with Struts: Visual Age for Java, JBuilder, Eclipse, Emacs, and Textpad are all popular choices among Struts developers. If you can use it with Java, you can use it with Struts.Enabling technologies:Applications developed with Struts are based on a number of enabling technologies. These components are not specific to Struts and underlie every Java web application. A reason that developers use frameworks like Struts is to hide the nasty details behind acronyms like HTTP, CGI, and JSP. As a Struts developer, you don’t need to be an alphabet soup guru, but a working knowledge of these base technologies can help you devise creative solutions to tricky problems.Hypertext Transfer Protocol (HTTP):When mediating talks between nations, diplomats often follow a formal protocol.Diplomatic protocols are designed to avoid misunderstandings and to keep negotiations from breaking down. In a similar vein, when computers need to talk, they also follow a formal protocol. The protocol defines how data is transmitted and how to decode it once it arrives. Web applications use the Hypertext Transfer Protocol (HTTP) to move data between the browser running on your computer and the application running on the server.Many server applications communicate using protocols other than HTTP. Some of these maintain an ongoing connection between the computers. The application server knows exactly who is connected at all times and can tell when a connection is dropped. Because they know the state of each connection and the identity of each person using it, these are known as stateful protocols.By contrast, HTTP is known as a stateless protocol. An HTTP server will accept any request from any client and will always provide some type of response, even if the response is just to say no. Without the overhead of negotiating and retaining a connection, stateless protocols can handle a large volume of requests. This is one reason why the Internet has been able to scale to millions of computers.Another reason HTTP has become the universal standard is its simplicity. An HTTP request looks like an ordinary text document. This has made it easy for applications to make HTTP requests.You can even send an HTTP request by hand using a standard utility such as Telnet. When the HTTP response comes back, it is also in plain text that developers can read.The first line in the HTTP request contains the method, followed by the location of the requested resource and the version of HTTP. Zero or more HTTP request headers follow the initial line. The HTTP headers provide additional information to the server. This can include the browser type and version, acceptable document types, and the browser’s cookies, just to name a few. Of t he seven request methods, GET and POST are by far the most popular.Once the server has received and serviced the request, it will issue an HTTP response. The first line in the response is called the status line and carries the HTTP protocol version, a numeric status, and a brief description of the status. Following the status line, the server will return a set of HTTP response headers that work in a way similar to the request headers.As we mentioned, HTTP does not preserve state information between requests. The server logs the request, sends the response, and goes blissfully on to the next request. While simple and efficient, a stateless protocol is problematic for dynamic applications that need to keep track of their users. (Ignorance is not always bliss.Cookies and URL rewriting are two common ways to keep track of users between requests. A cookie is a special packet of information on the user’s computer. URL rewriting stores a special reference in the page address that a Java server can use to track users. Neither approach is seamless, and using either means extra work when developing a web application. On its own, a standard HTTP web server does not traffic in dynamic content. It mainly uses the request to locate a file and then returns that file in the response. The file is typically formatted using Hypertext Markup Language (HTML) [W3C, HTML] that the web browser can format and display. The HTML page often includes hypertext links to other web pages and may display any number of other goodies, such as images and videos. The user clicks a link to make another request, and the process begins a new.Standard web servers handle static content and images quite well but need a helping hand to provide users with a customized, dynamic response.DEFINITION: Static content on the Web comes directly from text or data files, like HTML or JPEG files. These files might be changed from time to time, but they are not altered automaticallywhen requested by a web browser. Dynamic content, on the other hand, is generated on the fly, typically in response to an individualized request from a browser.Common Gateway Interface (CGI):The first widely used standard for producing dynamic content was the Common Gateway Interface (CGI). CGI uses standard operating system features, such as environment variables and standard input and output, to create a bridge, or gateway, between the web server and other applications on the host machine. The other applications can look at the request sent to them by the web server and create a customized response.When a web server receives a request that’s intended for a CGI program, it runs that program and provides the program with information from the incoming request. The CGI program runs and sends its output back to the server. The web server then relays the response to the browser.CGI defines a set of conventions regarding what information it will pass as environment variables and how it expects standard input and output to be used. Like HTTP, CGI is flexible and easy to implement, and a great number of CGI-aware programs have been written.The main drawback to CGI is that it must run a new copy of the CGI-aware program for each request. This is a relatively expensive process that can bog down high-volume sites where thousands of requests are serviced per minute. Another drawback is that CGI programs tend to be platform dependent. A CGI program written for one operating system may not run on another.Java servlets:Sun’s Java Servlet platform directly addresses the two main drawbacks of CGI , servlets offer better performance and utilization of resources than conventional CGI programs. Second, the write-once, run-anywhere nature of Java means that servlets are portable between operating systems that have a Java Virtual Machine (JVM).A servlet looks and feels like a miniature web server. It receives a request and renders a response. But, unlike conventional web servers, the servlet application programming interface (API) is specifically designed to help Java developers create dynamic applications.The servlet itself is simply a Java class that has been compiled into byte code, like any other Java object. The servlet has access to a rich API of HTTP-specific services, but it is still just another Java object running in an application and can leverage all your other Java assets.To give conventional web servers access to servlets, the servlets are plugged into containers. The servlet container is attached to the web server. Each servlet can declare what URL patterns it would like to handle. When a request matching a registered pattern arrives, the web server passes the request to the container, and the container invokes the servlet.But unlike CGI programs, a new servlet is not created for each request. Once the container instantiates the servlet, it will just create a new thread for each request. Java threads are much less expensive than the server processes used by CGI programs. Once the servlet has been created, using it for additional requests incurs very little overhead. Servlet developers can use the init() method to hold references to expensive resources, such as database connections or EJB Home Interfaces, so that they can be shared between requests. Acquiring resources like these can take several seconds—which is longer than many surfers are willing to wait.The other edge of the sword is that, since servlets are multithreaded, servlet developers must take special care to be sure their servlets are thread-safe. To learn more about servlet programming, we recommend Java Servlets by Example, by Alan R. Williamson [Williamson]. The definitive source for Servlet information is the Java Servlet Specification [Sun, JST].JavaServer Pages:While Java servlets are a big step up from CGI programs, they are not a panacea. To generate the response, developers are still stuck with using println statements to render the HTML. Code that looks like:("<P>One line of HTML.</P>");("<P>Another line of HTML.</P>");is all too common in servlets that generate the HTTP response. There are libraries that can help you generate HTML, but as applications grow more complex, Java developers end up being cast into the role of HTML page designers.Meanwhile, given the choice, most project managers prefer to divide development teams into specialized groups. They like HTML designers to be working on the presentation while Java engineers sweat the business logic. Using servlets alone encourages mixing markup with business logic, making it difficult for team members to specialize.To solve this problem, Sun turned to the idea of using server pages to combine scripting and templating technologies into a single component. To build Java Server Pages, developers start by creating HTML pages in the same old way, using the same old HTML syntax. To bring dynamic content into the page, the developer can also place JSP scripting elements on the page. Scripting elements are tags that encapsulate logic that is recognized by the JSP. You can easily pick out scripting elements on JSP pages by looking for code that begins with <% and ends with %>.To be seen as a JSP page, the file just needs to be saved with an extension of .jsp.When a client requests the JSP page, the container translates the page into a source code file for a Java servlet and compiles the source into a Java class file—just as you would do if you were writing a servlet from scratch. At runtime, the container can also check the last modified date of the JSP file against the class file. If the JSP file has changed since it was last compiled, the container will retranslate and rebuild the page all over again.Project managers can now assign the presentation layer to HTML developers, who then pass on their work to Java developers to complete the business-logic portion. The important thing to remember is that a JSP page is really just a servlet. Anything you can do with a servlet, you can do with a JSP.JavaBeans:JavaBeans are Java classes which conform to a set of design patterns that make them easier to use with development tools and other components.DEFINITION A JavaBean is a reusable software component written in Java. To qualify as a JavaBean, the class must be concrete and public, and have a noargument constructor. JavaBeans expose internal fields as properties by providing public methods that follow a consistent design pattern. Knowing that the property names follow this pattern, other Java classes are able to use introspection to discover and manipulate JavaBean properties.The JavaBean design patterns provide access to the bean’s internal state through two flavors of methods: accessors are used to read a JavaBean’s state; mutators are used to change a JavaBean’s state.Mutators are always prefixed with lowercase token set followed by the property name. The first character in the property name must be uppercase. The return value is always void—mutators onlychange property values; they do not retrieve them. The mutator for a simple property takes only one parameter in its signature, which can be of any type. Mutators are often nicknamed setters after their prefix. The mutator method signature for a weight property of the type Double would be: public void setWeight(Double weight)A similar design pattern is used to create the accessor method signature. Accessor methods are always prefixed with the lowercase token get, followed by the property name. The first character in the property name must be uppercase. The return value will match the method parameter in the corresponding mutator. Accessors for simple properties cannot accept parameters in their method signature. Not surprisingly, accessors are often called getters.The accessor method signature for our weight property is：public Double getWeight()If the accessor returns a logical value, there is a variant pattern. Instead of using the lowercase token get, a logical property can use the prefix is, followed by the property name. The first character in the property name must be uppercase. The return value will always be a logical value—either boolean or Boolean. Logical accessors cannot accept parameters in their method signature.The boolean accessor method signature for an on property would bepublic boolean isOn()The canonical method signatures play an important role when working with Java- Beans. Other components are able to use the Java Reflection API to discover a Jav aBean’s properties by looking for methods prefixed by set, is, or get. If a component finds such a signature on a JavaBean, it knows that the method can be used to access or change the bean’s properties.Sun introduced JavaBeans to work with GUI components, but they are now used with every aspect of Java development, including web applications. When Sun engineers developed the JSP tag extension classes, they designed them to work with JavaBeans. The dynamic data for a page can be passed as a JavaBean, and t he JSP tag can then use the bean’s properties to customize the output.For more on JavaBeans, we highly recommend The Awesome Power of JavaBeans, by Lawrence H. Rodrigues [Rodrigues]. The definitive source for JavaBean information is the JavaBean Specification [Sun, JBS].Model 2:The release of the Servlet/JSP Specification described Model 2 as an architecture that uses servlets and JSP pages together in the same application. The term Model 2 disappeared from later releases, but it remains in popular use among Java web developers.Under Model 2, servlets handle the data access and navigational flow, while JSP pages handle the presentation. Model 2 lets Java engineers and HTML developers each work on their own part of the application. A change in one part of a Model 2 application does not mandate a change to another part of the application. HTML developers can often change the look and feel of an application without changing how the back-office servlets work.The Struts framework is based on the Model 2 architecture. It provides a controller servlet to handle the navigational flow and special classes to help with the data access. A substantial custom tag library is bundled with the framework to make Struts easy to use with JSP pages.Summary:In this article, we introduced Struts as an application framework. We examined the technology behind HTTP, the Common Gateway Interface, Java servlets, JSPs, and JavaBeans. We also looked at the Model 2 application architecture to see how it is used to combine servlets and JSPs in the same application.中文翻译JSP 应用框架什么是应用框架：框架（framework）是可重用的，半成品的应用程序，能够用来产生专门的定制程序。

毕业设计说明书英文文献及中文翻译学生姓名：学号：学院：专业：指导教师：Struts——an open-source MVC implementationBy: Malcolm Davis.Source: Struts--an open-source MVC implementation[J].IBM Systems JournalThis article introduces Struts, a Model-View-Controller implementation that uses servlets and JavaServer Pages (JSP) technology. Struts can help you control change in your Web project and promote specialization. Even if you never implement a system with Struts,you may get some ideas for your future servlets and JSP page implementation.IntroductionKids in grade school put HTML pages on the Internet. However, there is a monumental difference between a grade school page and a professionally developed Web site. The page designer (or HTML developer) must understand colors, the customer, product flow, page layout, browser compatibility, image creation, JavaScript, and more. Putting a great looking site together takes a lot of work, and most Java developers are more interested in creating agreat looking object interface than a user interface. Java Server Pages (JSP) technology provides the glue between the page designer and the Java developer.If you have worked on a large-scale Web application, you understand the term change.Model-View-Controller (MVC) is a design pattern put together to help control change. MVC decouples interface from business logic and data. Struts is an MVC implementation that uses Servlets 2.2 and JSP 1.1 tags, from the J2EE specifications, as part of the implementation. Y ou may never implement a system with Struts, but looking at Struts may give you some ideas on your future Servlets and JSP implementations.Model-View-Controller (MVC)JSP tags solved only part of our problem. We still have issues with validation, flow control, and updating the state of the application. This is where MVC comes to the rescue.MVC helps resolve some of the issues with the single module approach by dividing theproblem into three categories:• ModelThe model contains the core of the application's functionality. The model encapsulates thestate of the application. Sometimes the only functionality it contains is state. It knows nothing about the view or controller.• View• The view provides the presentation of the model. It is the look of the application. The view can access the model getters, but it has no knowledge of the setters. In addition, it knows nothing about the controller. The view should be notified when changes to the model occur. ControllerThe controller reacts to the user input. It creates and sets the model.MVC Model 2The Web brought some unique challenges to software developers, most notably the stateless connection between the client and the server. This stateless behavior made it difficult for the model to notify the view of changes. On the Web, the browser has to re-query the server to discover modification to the state of the application.Another noticeable change is that the view uses different technology for implementation than the model or controller. Of course, we could use Java (or PERL, C/C++ or what ever) code to generate HTML. There are several disadvantages to that approach:• Java programmers should develop services, not HTML.• Changes to layout would require changes to code.• Customers of the service should be able to create pages to meet their specific needs.• The page designer isn't able to have direct involvement in page development.• HTML embedded into code is ugly.For the Web, the classical form of MVC needed to change.MVC Model 2 Struts, an MVC 2 implementation Struts is a set of cooperating classes, servlets, and JSP tags that make up a reusable MVC 2 design. This definition implies that Struts is a framework, rather than a library, but Struts also contains an extensive tag library and utility classes that work independently of the framework.• Client browserAn HTTP request from the client browser creates an event. The Web container will respond with an HTTP response.• ControllerThe Controller receives the request from the browser, and makes the decision where to send the request. With Struts, the Controller is a command design pattern implemented as a servlet. The struts-config.xml file configures the Controller.• Business logicThe business logic updates the state of the model and helps control the flow of the application.With Struts this is done with an Action class as a thin wrapper to the actual business logic.• Model stateThe model represents the state of the application. The business objects update the application state. ActionForm bean represents the Model state at a session or request level, and not at a persistent level. The JSP file reads information from the ActionForm bean using JSP tags.• ViewThe view is simply a JSP file. There is no flow logic, no business logic, and no model information -- just tags. Tags are one of the things that make Struts unique compared to other frameworks like V elocity.Struts detailsDisplayed in Figure 6 is a stripped-down UML diagram of the org.apache.struts.action package and shows the minimal relationships among ActionServlet (Controller), ActionForm (Form State), and Action (Model Wrapper).The ActionServlet classDo you remember the days of function mappings? Y ou would map some input event to a ointer to a function. If you where slick, you would place the configuration information into ale and load the file at run time. Function pointer arrays were the good old days of structured rogramming in C.Life is better now that we have Java technology, XML, J2EE, and all that. The Struts ontroller is a servlet that maps events (an event generally being an HTTP post) to classes. guess what -- the Controller uses a configuration file so you don_t have to hard-code the alues. Life changes, but stays the same.ActionServlet is the Command part of the MVC implementation and is the core of the ramework. ActionServlet (Command) creates and uses Action, an ActionForm, and ctionForward. As mentioned earlier, the struts-config.xml file configures the command. uring the creation of the Web project, Action and ActionForm are extended to solve the pecific problem space. The file struts-config.xml instructs ActionServlet on how to use the xtended classes. There are several advantages to this approach:• The entire logical flow of the application is in a hierarchical text file. This makes itasier to view and understand, especially with large applications.• The page designer does not have to wade through Java code to understand the flow of e application.• The Java developer does not need to recompile code when making flow changes. Command functionality can be added by extending ActionServlet.The ActionForm classActionForm maintains the session state for the Web application. ActionForm is anbstract class that is sub-classed for each input form model. When I say input form model, Im saying ActionForm represents a general concept of data that is set or updated by a HTML form. For instance, you may have a UserActionForm that is set by an HTML Form. The Struts framework will:• Check to see if a UserActionForm exists; if not, it will create an instance of the class.• Struts will set the state of the UserActionForm using corresponding fields from the HttpServletRequest. No more dreadful request.getParameter() calls. For instance, the Struts framework will take fname from request stream and call UserActionForm.setFname().• The Struts framework updates the state of the UserActionForm before passing it to the business wrapper UserAction.• Before passing it to the Action class, Struts will also conduct form state validation by calling the validation() method on UserActionForm. Note: This is not always wise to do. There might be ways of using UserActionForm in other pages or business objects, where the validation might be different. V alidation of the state might be better in the UserAction class.• The UserActionForm can be maintained at a session level.Notes:• The struts-config.xml file controls which HTML form request maps to which ActionForm. • Multiple requests can be mapped UserActionForm.• UserActionForm can be mapped over multiple pages for things such as wizards.The Action classThe Action class is a wrapper around the business logic. The purpose of Action class is to translate the HttpServletRequest to the business logic. To use Action, subclass and overwrite the process() method.The ActionServlet (Command) passes the parameterized classes to ActionForm using the perform() method. Again, no more dreadful request.getParameter() calls. By the time the event gets here, the input form data (or HTML form data) has already been translated out of the request stream and into an ActionForm class.Note: "Think thin" when extending the Action class. The Action class should control the flow and not the logic of the application. By placing the business logic in a separate package or EJB, we allow flexibility and reuse.Another way of thinking about Action class is as the Adapter design pattern. The purpose of the Action is to "Convert the interface of a class into another interface the clients expect. Adapter lets classes work together that couldn_t otherwise because of incompatibility interface" (from Design Patterns - Elements of Reusable OO Software by Gof). The client in this instance is the ActionServlet that knows nothing about our specific business class interface. Therefore, Struts provides a business interface it does understand, Action. By extending the Action, we make our business interface compatible with Struts business interface. (An interesting observation is that Action is a class and not an interface. Action started as an interface and changed into a class over time. Nothing's perfect.)The Error classesThe UML diagram (Figure 6) also included ActionError and ActionErrors. ActionError encapsulates an individual error message. ActionErrors is a container of ActionError classes that the View can access using tags. ActionErrors is Struts way of keeping up with a list of errors.UML diagram of the relationship of the Command (ActionServlet) to the Model (Action) The ActionMapping classAn incoming event is normally in the form of an HTTP request, which the servlet Container turns into an HttpServletRequest. The Controller looks at the incoming event and dispatches the request to an Action class. The struts-config.xml determines what Action class the Controller calls. The struts-config.xml configuration information is translated into a set of ActionMapping, which are put into container of ActionMappings. (If you have not noticed it, classes that end with s are containers) The ActionMapping contains the knowledge of how a specific event maps to specific Actions. The ActionServlet (Command) passes the ActionMapping to the Action class via the perform() method. This allows Action to access the information to control flow.ActionMappingsActionMappings is a collection of ActionMapping objects.Struts pros Use of JSP tag mechanism The tag feature promotes reusable code and abstracts Java code from the JSP file. This feature allows nice integration into JSP-based development tools that allow authoring with tags.• Tag libraryWhy re-invent the wheel, or a tag library? If you cannot find something you need in the library, contribute. In addition, Struts provides a starting point if you are learning JSP tag technology.• Open sourceY ou have all the advantages of open source, such as being able to see the code and having everyone else using the library reviewing the code. Many eyes make for great code review.• Sample MVC implementationStruts offers some insight if you want to create your own MVC implementation.• Manage the problem spaceDivide and conquer is a nice way of solving the problem and making the problem manageable.中北大学2014届毕业设计英文文献译文Struts 一个开源的MVC实现作者：马尔科姆·戴维斯。

附录1 外文参考文献（译文）JSP内置对象有些对象不用声明就可以在JSP页面的Java程序片和表达式部分使用，这就是JSP 的内置对象。

JSP的内置对象有：request、response、session、application、out.response和request对象是JSP内置对象中较重要的两个，这两个对象提供了对服务器和浏览器通信方法的控制。

直接讨论这两个对象前，要先对HTTP协议—Word Wide Wed底层协议做简单介绍。

Word Wide Wed是怎样运行的呢？在浏览器上键入一个正确的网址后，若一切顺利，网页就出现了。

使用浏览器从网站获取HTML页面时，实际在使用超文本传输协议。

HTTP规定了信息在Internet上的传输方法，特别是规定吧浏览器与服务器的交互方法。

从网站获取页面时，浏览器在网站上打开了一个对网络服务器的连接，并发出请求。

服务器收到请求后回应，所以HTTP协议的核心就是“请求和响应”。

一个典型的请求通常包含许多头，称作请求的HTTP头。

头提供了关于信息体的附加信息及请求的来源。

其中有些头是标准的，有些和特定的浏览器有关。

一个请求还可能包含信息体，例如，信息体可包含HTML表单的内容。

在HTML表单上单击Submit 键时，该表单使用ACTION=”POST”或ACTION=”GET”方法，输入表单的内容都被发送到服务器上。

该表单内容就由POST方法或GET方法在请求的信息体中发送。

服务器发送请求时，返回HTTP响应。

响应也有某种结构，每个响应都由状态行开始，可以包含几个头及可能的信息体，称为响应的HTTP头和响应信息体，这些头和信息体由服务器发送给客户的浏览器，信息体就是客户请求的网页的运行结果，对于JSP 页面，就是网页的静态信息。

用户可能已经熟悉状态行，状态行说明了正在使用的协议、状态代码及文本信息。

例如，若服务器请求出错，则状态行返回错误及对错误描述，比如HTTP/1.1 404 Object Not Found。

外文文献-JSP Technology Conspectus And Specialties 毕业设计外文文献原文及译文学生姓名: 学号:电子与计算机科学技术系系别:网络工程专业:指导教师:2015年 5 月中北大学信息商务学院2015届毕业设计外文文献原文及译文JSP Technology Conspectus And SpecialtiesThe JSP (Java Server mix) technology is used by the Sun microsystem issued by the company to develop dynamic Web application technology. With its easy, cross-platform, in many dynamic Web application programming languages, in a short span of a few years, has formed a complete set of standards, and widely used in electronic commerce, etc. In China, the JSP now also got more extensive attention, get a good development, more and more dynamic website to JSP technology. Therelated technologies of JSP are briefly introduced.The JSP a simple technology can quickly and with the method of generating Web pages. Use the JSP technology Web page can be easily display dynamic content. The JSP technology are designed to make the construction based on Web applications easier and efficient, and these applications and various Web server, application server, the browser and development tools work together.The JSP technology isn't the only dynamic web technology, also not the first one, in the JSP technology existed before the emergence of several excellent dynamic web technology, such as CGI, ASP, etc. With the introduction of these technologies under dynamic web technology, the development and the JSP. TechnicalJSP the development background and development historyIn web brief history, from a world wide web that most of the network information static on stock transactions evolution to acquisition of an operation and infrastructure. In a variety of applications, may be used for based on Web client, look no restrictions.Based on the browser client applications than traditional based on client/server applications has several advantages. These benefits include almost no limit client access and extremely simplified application deployment and management (to update an application, management personnel only need to change the program on a server, not thousands of installation in client applications). So, the software industry is rapidly to build on the client browser multi-layer application.The rapid growth of exquisite based Web application requirements development of technical improvements. Static HTML to show relatively static content is right choice, The new challenge is to create the interaction based on Web applications, in these procedures, the content of a Web page is based on the user's request or the state of the system, and are not predefined characters.For the problem of an early solution is to use a CGI - BIN interface. Developers write to第 1 页共 19 页中北大学信息商务学院2015届毕业设计外文文献原文及译文interface with the relevant procedures and separate based on Web applications, the latter through the Web server to invoke the former. This plan has serious problem -- each new extensible CGI requirements in a new process on the server. If multiple concurrent users access to this procedure, these processes will use the Web server of all available resources, and the performance of the system will be reduced toextremely low.Some Web server providers have to provide for their server byplugins "and" the API to simplify the Web application development. These solutions are associated with certain Web server, cannot solve the span multiple suppliers solutions. For example, Microsoft's Active Server mix (ASP) technology in the Web page to create dynamic content more easily, but also can work in Microsoft on Personal Web Server and IIS.There are other solutions, but cannot make an ordinary pagedesigners can easily master. For example, such as the Servlet Java technologies can use Java language interaction application server code easier. Developers to write such Servlet to receive signals from the Web browser to generate an HTTP request, a dynamic response (may be inquires the database to finish the request), then send contain HTML or XML documents to the response of the browser.note: one is based on a Java Servlet Java technical operation in the server program (with different, the latter operating in the Applet browser end). In this book the Servlet chapter 4.Using this method, the entire page must have made in Java Servlet.If developers or Web managers want to adjust page, you'll have to edit and recompile the Servlet Java, even in logic has been able to run. Using this method, the dynamic content with the application of the page still need to develop skills.Obviously, what is needed is a industry to create dynamic content within the scope of the pages of the solution. This program will solve the current scheme are limited. As follows:can on any Web server or applications.will application page displays and separation.can rapidly developing and testing.simplify the interactive development based on Web application process.The JSP technology is designed to meet such requirements. The JSP specification is a Web server, application server, trading system and develop extensive cooperation between the tool suppliers. From this standard to develop the existing integration and balance of Java programming environment (for example, Java Servlet and JavaBeans) support techniques and tools. The result is a kind of new and developing method based on Web applications, using第 2 页共 19 页中北大学信息商务学院2015届毕业设计外文文献原文及译文component-based application logic page designers with powerful functions.Overall Semantics of a JSP PageA JSP page implementation class defines a _jspService() method mapping from the request to the response object. Some details of this transformation are specific to the scripting language used (see Chapter JSP.9, “Scripting”). Most details are not language specific and are described in this chapter.The content of a JSP page is devoted largely to describing the data that is written into the output stream of the response. (The JSP container usually sends this data back to the client.) The description is based on a JspWriter object that is exposed through the implicit object out (see Section JSP.1.8.3, “Implicit Objects”). Its value varies:Initially, out is a new JspWriter object. This object may bedifferent from the stream object returned from response.getWriter(), and may be considered to be interposed on the latter in order to implement buffering (see Section JSP.1.10.1, “The page Directive”). This is the initial out object. JSP page authors are prohibited from writingdirectly to either the PrintWriter or OutputStream associated with the ServletResponse.The JSP container should not invoke response.getWriter() until the time when the first portion of the content is to be sent to the client.This enables a number of uses of JSP, including using JSP as a language to “glue” actions that deliver binary content, or reliably forwarding to a servlet, or change dynamically the content type of the response before generating content. See Chapter JSP.4, “Internationalization Issues”.Within the body of some actions, out may be temporarily re-assigned to a different (nested) instance of a JspWriter object. Whether this is the case depends on the details of the action’s semantics. Typically the content of these temporary streams is appended to the stream previously referred to by out, and out is subsequently re-assignedto refer to the previous (nesting) stream. Such nested streams are always buffered, and require explicit flushing to a nesting stream or their contents will be discarded.If the initial out JspWriter object is buffered, then depending upon the value of the autoFlush attribute of the page directive, the content of that buffer will either be automatically flushed out to the ServletResponse output stream to obviate overflow, or an exception shall be thrown to signal buffer overflow. If the initial out JspWriter is unbuffered, then content written to it will be passed directly through to the ServletResponse output stream.A JSP page can also describe what should happen when some specific events occur. In JSP 2.1, the only events that can be described are the initialization and the destruction of the第 3 页共 19 页中北大学信息商务学院2015届毕业设计外文文献原文及译文page. These events are described using “well-known method names”in declaration elements..JavaScript is used for the first kind is browser, the dynamicgeneral purpose of client scripting language. Netscape first proposed in 1995, but its JavaScript LiveScript called. Then quickly Netscape LiveScript renamed JavaScript, Java developers with them from the same issued a statement. A statement Java and JavaScript will complement each other, but they are different, so the technology of the many dismissed the misunderstanding of the two technologies.JavaScript to create user interface control provides a scripting language. In fact, in the browser into the JavaScript code logic. It can support such effect: when the cursor on the Web page of a mobile user input validation or transform image.Microsoft also write out their JavaScript version and the JScript called. Microsoft and Netscape support JavaScript and JScript around a core characteristics and European Manufacturers is.md by (ECMA) standards organization, the control standard of scripting language. ECMA its scripting language ECMAScript named.Servlets and JSPs often include fragments of information that are common to an organization, such as logos, copyrights, trademarks, or navigation bars. The web application uses the include mechanisms to import the information wherever it is needed, since it is easier to change content in one place then to maintain it in every piece of codewhere it is used. Some of this information is static and either never or rarely changes, such as an organization's logo. In other cases, the information is more dynamic and changes often and unpredictably, such as a textual greeting that must be localized for each user. In both cases, you want to ensure that the servlet or JSP can evolve independently ofits included content, and that the implementation of the servlet or JSP properly updates its included content as necessary.You want to include a resource that does not change very much (suchas a page fragment that represents a header or footer) in a JSP. Use the include directive in the including JSP page, and give the included JSP segment a .jspf extension.You want to include content in a JSP each time it receives a request, rather than when the JSP is converted to a servlet. Use the jsp:include standard action.You want to include a file dynamically in a JSP, based on a value derived from a configuration file. Use the jsp:include standard action. Provide the value in an external properties file or as a configuration parameter in the deployment descriptor.You want to include a fragment of an XML file inside of a JSP document, or include a JSP page in XML syntax. Use the jsp:include standard action for the includes that you want to第 4 页共 19 页中北大学信息商务学院2015届毕业设计外文文献原文及译文occur with each request of the JSP. Use the jsp:directive.include element if the include action should occur during the translation phase.You want to include a JSP segment from outside the including file's context. Use the c:importThe operation principle and the advantages of JSP tagsIn this section of the operating principle of simple introductionJSP and strengths.For the first time in a JSP documents requested by the engine, JSP Servlet is transformed into a document JSP. This engine is itself a Servlet. The operating process of the JSP shown below:(1) the JSP engine put the JSP files converting a Java source files (Servlet), if you find the files have any grammar mistake JSP,conversion process will interrupt, and to the server and client output error messages.(2) if converted, with the engine JSP javac Java source filecompiler into a corresponding scale-up files.(3) to create a the Servlet (JSP page), the transformation of the Servlet jspInit () method was executed, jspInit () method in the life cycle of Servlet executed only once.(4) jspService () method invocation to the client requests. For each request, JSP engine to create a new thread for processing the request.If you have multiple clients and request the JSP files, JSP engine will create multiple threads. Each client requests a thread. To executemulti-thread can greatly reduce the requirement of system resources,improving the concurrency value and response time. But also should notice the multi-thread programming, due to the limited Servlet always in response to memory, so is very fast.(5) if the file has been modified. The JSP, server will be set according to the document to decide whether to recompile, if need to recompile, will replace the Servlet compile the memory and continue the process.(6) although the JSP efficiency is high, but at first when the need to convert and compile and some slight delay. In addition, if at any time due to reasons of system resources, JSP engine will in some way of uncertain Servlet will remove from memory. When this happens jspDestroy () method was first call.第 5 页共 19 页中北大学信息商务学院2015届毕业设计外文文献原文及译文(7) and then Servlet examples were marked with "add" garbage collection. But in jspInit () some initialization work, if establish connection with database, or to establish a network connection, from a configuration file take some parameters, such as, in jspDestory () release of the corresponding resources.Based on a Java language has many other techniques JSP page dynamic characteristics, technical have embodied in the following aspects: One simplicity and effectiveness:The JSP dynamic web pages with the compilation ofthe static HTML pages of writing is very similar. Just in theoriginal HTML page add JSP tags, or some of the proprietary scripting (this is not necessary). So, a familiar with HTML page write design personnel may be easily performed JSP page development. And the developers can not only, and write script by JSP tags used exclusively others have written parts to realize dynamic pages. So, an unfamiliar with the web developers scripting language, can use the JSP make beautiful dynamic pages. And this in other dynamic web development is impossible.Tow the independence of the program:The JSP are part of the familyof the API Java, ithas the general characteristics of the cross-platform Java program. In other words, is to have the procedure, namely the independence of the platform, 6 Write bided anywhere! .Three procedures compatibility:The dynamic content can various JSP form, so it canshow for all kinds of customers, namely from using HTML/DHTML browser to use various handheld wireless equipment WML (for example, mobile phones and pdas), personal digital equipment to use XML applications, all can use B2B JSP dynamic pages.Four program reusability:In the JSP page can not directly, but embedded scriptingdynamic interaction will be cited as a component part. So, once such a component to write, it can be repeated several procedures, the programof the reusability. Now, a lot of standard JavaBeans library is a good example.第 6 页共 19 页中北大学信息商务学院2015届毕业设计外文文献原文及译文JSP技术简介及特点JSP(Java Server Pages)技术是由Sun公司发布的用于开发动态Web应用的一项技术。

jsp网站开发毕设外文翻译西安邮电大学外文文献翻译院 (系): 计算机学院专业: 计算机科学与技术班级:学生姓名: 导师姓名: 职称:起止时间:2011年 9月23日至 2012年 6月2日原文:Java and the InternetAlthough Java is very useful for solving traditional stand-alone programming problems, it is also important because it will solve programming problems on the World Wide Web.1. Client-side programmingThe Web’s initial server-browser design provided for interactive content, but the interactivity was completely provided by the server. The server produced static pages for the client browser, which would simply interpret and display them. Basic HTML contains simple mechanisms for data gathering: text-entry boxes, check boxes, radio boxes, lists and drop-down lists, as well as a button that can only be programmed to reset t he data on the form or “submit” the data on the form back to the server. This submission passes through the Common Gateway Interface (CGI) provided on all Web servers. The text within the submission tells CGI what to do with it. The most common action is to run a programlocated on the server in a directory that’s typically called “cgi-bin.” (If you watch the address window at the topof your browser when you push a button on a Web page, you can sometimes see “cgi-bin” within all thegobbledygook there.) These programs can be written in most languages. Perl is a common choice because it is designed for text manipulation and is interpreted, so it can be installed on any server regardless of processor or operating system.Many powerful Web sites today are built strictly on CGI, and you can in fact do nearly anything with it. However, Web sites built on CGI programs can rapidly become overly complicated to maintain, and there is also the problem of response time. The response of a CGI program depends on how much data must be sent, as well as the load on both the serverand the Internet. (On top of this, starting a CGI program tends to be slow.) The initial designers of the Web did not foresee how rapidly this bandwidth would be exhausted for the kinds of applications people developed. For example, any sort of dynamic graphing is nearlyimpossible to perform with consistency because a GIF file must becreated and moved from the server to the client for each version of the graph. And you’ve no doubt had direct ex perience with something as simple as validating the data on an input form. You press the submit button on a page; the data is shipped back to the server; the server starts a CGI program that discovers an error, formats an HTML page informing you of the error, and then sends the page back to you; youmust then back up a page and try again. Not only is this slow, it’s inelegant.The solution is client-side programming. Most machines that run Web browsers are powerful engines capable of doing vast work, and with the original static HTML approach they are sitting there, just idly waiting for the server to dish up the next page. Client-side programming means that the Web browser is harnessed to do whatever work it can, and the result for the user is a much speedier and more interactive experience at your Web site.The problem with discussions of client-side programming is that they aren’t very different fromdiscussions of programming in general. The parameters are almost the same, but the platform is different: a Web browser is like a limited operating system. In the end, you must still program, and this accounts for the dizzying array of problems and solutions produced by client-side programming. The rest of this section provides an overview of the issues and approaches in client-side programming. 2.Plug-insOne of the most significant steps forward in client-side programming is the development of the plug-in. This is a way for a programmer to add new functionality to the browser by downloading a piece of code that plugs itself into the appropriate spot in the browser. It tells the browser “from now on you can perform this new activity.” (You need to download the plug-in only once.) Some fast and powerfulbehavior is added to browsers via plug-ins, but writing a plug-in is not a trivial task, and isn’t somethingyou’d want to do as part of the process of building a particular site. The value of the plug-in forclient-side programming is that it allows an expert programmer to develop a new language and add that language to a browser without the permission of the browser manufacturer. Thus, plug-ins provide a “back door” that allows the creation of new client-side programming languages (although not alllanguages are implemented as plug-ins).3.Scripting languagesPlug-ins resulted in an explosion of scripting languages. With a scripting language you embed the source code for your client-side program directly into the HTML page, and the plug-in that interpretsthat language is automatically activated while the HTML page is being displayed. Scripting languages tend to be reasonably easy to understand and, because they are simply text that is part of an HTML page, they load very quickly as part of the single server hit required to procure that page. The trade-off is that your code is exposed for everyone to see (and steal). Generally, however, you aren’t doing amazingly sophisticated things with scripting languages so this is not too much of a hardship. This points out that the scripting languages used inside Web browsers are really intended to solve specific types of problems, primarily the creation of richer and more interactive graphical userinterfaces (GUIs). However, a scripting language might solve 80 percent of the problems encountered in client-side programming. Your problems might very well fit completely within that 80 percent, and sincescripting languages can allow easier and faster development, you should probably consider a scripting language before looking at a more involved solution such as Java or ActiveX programming. The most commonly discussed browser scripting languages are JavaScript (which has nothing to do with Java; it’s named that way just to grab some of Java’s marketing momentum), VBScript (whichlooks like Visual Basic), and Tcl/Tk, which comes from the popular cross-platform GUI-building language. There are others out there, and no doubt more in development.JavaScript is probably the most commonly supported. It comes builtinto both Netscape Navigatorand the Microsoft Internet Explorer (IE). In addition, there are probably more JavaScript books available than there are for the other browser languages, and some tools automatically create pages using JavaScript. However, if you’re already fluent in Visual Basic or Tcl/Tk, you’ll be mor e productive using those scripting languages rather than learning a new one. (You’ll have your hands full dealing with the Web issues already.)4.JavaIf a scripting language can solve 80 percent of the client-side programming problems, what about the other 20 percent—the “really hardstuff?” The most popular solution today is Java. Not only is it a powerful programming language built to be secure, cross-platform, and international, but Java is being continually extended to provide language features and libraries that elegantly handle problems that are difficult in traditional programming languages, such as multithreading, database access, network programming, and distributed computing. Java allows client-side programming via the applet. An applet is a mini-program that will run only under a Web browser. The applet is downloaded automatically as part of a Web page (just as, for example, a graphic is automatically downloaded).it provides you with a When the applet is activated it executes a program. This is part of its beauty—way to automatically distribute the client software from the server at the time the user needs the client software, and no sooner. The user gets the latest version of the client software without fail and without difficult reinstallation. Because of the way Java is designed, the programmer needs to create only a single program, and that program automatically works with all computers that have browsers with built-in Java interpreters. (This safely includes the vast majority of machines.) Since Java is a full-fledged programming language, you can do as much work as possible on the client before and after making requests of the server. For example, you won’t need to send a request form across the Internet todiscover that you’ve gotten a d ate or some other parameter wrong, and your client computer can quickly do the work of plotting data instead of waiting for the server to make a plot and ship a graphic image back to you. Not only do you get the immediate win of speed and responsiveness, but the general network traffic and load on servers can be reduced, preventing the entire Internet from slowing down. One advantage a Java applet has over a scripted program is that it’s in compiled form, so the sourcecode isn’t available to the client. O n the other hand, a Javaapplet can be decompiled without too much trouble, but hiding your code is often not an important issue. Two other factors can be important. As you will see later in this book, a compiled Java applet can comprise many modules and t ake multiple server “hits” (accesses) to download. (In Java 1.1 and higher this is minimized by Java archives, called JAR files, that allow all the required modules to be packaged together and compressed for a single download.) A scripted program will just be integrated into the Web page as part of its text (and will generally be smaller and reduce server hits). This could be important to the responsiveness of your Web site. Another factor is the all-important learning curve. Regardless of what you’ve heard, Java is not a trivial language to learn. If you’re a Visual Basic programmer, moving to VBScript will be your fastest solution, and since it will probably solve most typical client/server problems you might be hard pressed to justify learning Java. If yo u’re experienced with a scripting language you willcertainly benefit from looking at JavaScript or VBScript before committing to Java, since they might fit your needs handily and you’ll bemore productive sooner.to run its applets withi5.ActiveXTo so me degree, the competitor to Java is Microsoft’s ActiveX, although it takes a completely different approach. ActiveX wasoriginally a Windows-only solution, although it is now being developed via an independent consortium to become cross-platform. Effectively, ActiveX says “if yourprogram connects to its environment just so, it can be dropped into a Web page and run under a browser that supports ActiveX.” (IE directly supports ActiveX and Netscape does so using a plug-in.) Thus, ActiveX does not constrain you to a particular language. If, for example, you’re already an experienced Windows programmer using a language such as C++, Visual Basic, or Borland’s Delphi, you can create ActiveX components with almost no changes to your programming knowledge. ActiveX also provides a path for the use of legacy code in your Web pages.6.Internet vs. intranetThe Web is the most general solution to the client/server problem,so it makes sense that you can use the same technology to solve a subset of the problem, in particular the classic client/server problem within a company. With traditional client/server approaches you have the problemof multiple types of client computers, as well as the difficulty of installing new client software, both of which are handily solved with Web browsers and client-side programming. When Web technology is used for an information network that is restricted to a particular company, it is referred to as an intranet. Intranets provide much greater security than the Internet, since you can physically control access to the servers within your company. In terms of training, it seems that once people understand the general concept of a browser it’s much easier for them to deal with differences in the way pages and applets look, so thelearning curve for new kinds of systems seems to be reduced.The security problem brings us to one of the divisions that seems to be automatically forming in the world of client-side programming. If your program is running on the Internet, you don’t know what platform it will be working under, and you want to be extra careful that you don’t disseminate buggy code. You need something cross-platform and secure, like a scripting language or Java. If you’re running on an intranet, you might have a different set of constraints. It’s not uncommon that your machines could all be Intel/Windows platforms. On an intranet, you’re responsible for the quality of your own code and can repair bugs when they’re discovered. In addition, you might already have abody of legacy code that you’ve been using in a more traditional client/server approach, whereby you must physically install clientprograms every time you do an upgrade. The time wasted in installing upgrades is the most compelling reason to move to browsers, because upgrades are invisible and automatic. If you are involved in such an intranet, the most sensible approach to take is the shortest path that allows you to use your existing code base, rather than trying to recode your programs in a new language.When faced with this bewildering array of solutions to the client-side programming problem, the bestplan of attack is a cost-benefit analysis. Consider the constraints of your problem and what would be the shortest path to your solution. Since client-side programming is still programming, it’s always a good idea to take the fastest development approach for your particular situation. This is an aggressive stance to prepare for inevitable encounters with the problems of program development.翻译:Java和因特网Java除了可解决传统的程序设计问题以外，还能解决World Wide Web(万维网)上的编程问题。

JSP and WEB technologyKathy Sierra, Bert Bates1 JSP IntroductionJSP (JavaServer Pages) is a Java-based scripting technology. Is advocated by Sun Microsystems Inc., together with a number of companies involved in the establishment of a dynamic web page technology standards. JSP technology is somewhat similar to ASP technology, It is a traditional HTML p age file (*. htm, *. html) to insert Java program segment (Scriptlet) and JSP tag (tag), To form the JSP file（*jsp）. Web development with JSP is a cross-platform applications that can run under Linux, but also in other operating systems. In the JSP of the many advantages, one of which is that it will be HTML encoded Web page from the business logic separated effectively. JSP access with reusable components, such as Servlet, JavaBean and Java-based Web applications. JSP also supports directly in the Web page embedded Java code. JSP can be used two ways to access documents: JSP documents sent by the browser request, the request sent to the Servlet. JSP technology uses Java programming language, XML-type tags and scriptlets, to have a package deal with the logi c of dynamic pages. Page tags and scriptlets can also exist in the server access to the resources of the application logic. JSP logic and We b page design and display isolated and support reusable component-based design, Web-based applications more quickly and easily developed.The Web server when meets visits the JSP homepage the request, first carries out segment, will then carry out the result code to return together with JSP in the document HTML for the customer. The insertion Java segment may operate t he database, again the directional homepage and so on, realizes the function which the establishment dynamic homepage needs. JSP and Java Servlet are the same, is in the server end execution, usually returns to this client side is a HTML text, therefore client side, so long as has the browser to be able to glance over.The JSP page is composed of the HTML code and the inserting Java code. The server in the page by the client side was requested that later will carry on processing to these Java code, will then produce the HTML page will return gives the client side the browser. Java Servlet is the JSP technology base, moreover the large-scale Web application procedure's development needs Java Servlet and the JSP coordination can complete. JSP had the Java technology simply easy to use, completeobject-oriented, had the platform independency, and safe reliable, mainly faced Internet's all characteristics.2 JSP computing techniqueTo carry on the dynamic website conveniently fast the development, JSP has made the improvement in the following several aspects, causes it to become builds the cross platform fast the dynamic website first choice plan.2.1 carries on the content production and the demonstration separatesWith the JSP technology, the Web page develop ment personnel may use HTML or the XML marking design and the formatted final page, and uses the JSP marking or the tootsy produces on page's dynamic content originally. Production content's logic is sealed in marks and in the JavaBeans module, and ties up in the script, all scripts in server end movement. Because core logic is sealed in marks and in JavaBeans, therefore the Web administrative personnels and the page designer, can edit and use the JSP page, but does not affect the content the production. In the server end, the JSP engine explained that the JSP marking and the script, produce the content which requested, and (or XML) page's form transmits the result by HTML the browser. This both are helpful in the author protects own code, and can guarantee any based on the HTML Web browser's complete usability.2.2 may entrust with heavy responsibility the moduleThe overwhelming majority JSP page relies on may entrust with heavy responsibility, the cross platform module (JavaBeans or Enterprise the JavaBea ns module) carries out complex processing which the application procedure requests. The development personnel can share and exchange the execution ordinary operation the module, or causes these modules uses for more users and the customer association. Has accelerated the overall development process based on module's method, and causes each kind of organization obtains balanced in their existing skill and in the optimized result development endeavor.2.3 uses markingThe Web page development personnel will not be the familiar script language programmers. The JSP technology has sealed many functions, these functions are easy to use, marking to carry on the dynamic content production with JSP in the related XML to need. The standard JSP marking can visit and t he instantiation JavaBeans module, the establishment or the retrieval module attribute, downloads Applet, as well as the execution difficulty with codes and the time-consuming function with other methods.2.4 adapts the platformNearly all platforms support Java, JSP+JavaBeans to be possible to pass unimpeded nearly under all platforms. Transplants from a platform to other platform, JSP and JavaBeans does not even need to translate, because the Java byte code is standard has nothing to do with the platform.2.5 database connectionIn Java connects the database the technology is the JDBC, Java procedure is connected through the JDBC driver and the database, operations and so on execution inquiry, extraction data. Sun Corporation has also developed JDBC-ODBC bridge, uses this technical Java procedure to be possible to visit has the ODBC driver database, at present the majority database systems have the ODBC driver, therefore the Java procedure can visit such as Oracle, Sybase, MS SQL Server and databases and so on MS Access. In addition, through the development marking storehouse, the JSP technology may further expand. The third party development personnel and other personnel may found their marking storehouse for the commonly used function. This enables the Web page development personnel to be able to use the familiar tool and to be similar to marking same carries out the specific function component to carry on the work. The JSP technology very easy conformity to many kinds of application architecture, to use the extant tool and the skill, and can expand to the support enterprise distributional application.3 Eclipse function synopsisMore and more Java development personnel already started the productivity which and the quality income appreciates Eclipse JDT to provide. It was the Java editor provides grammar Gao Liang to demonstrate that the formatting, the fold, the content were auxiliary, code template and so on many functions. It grows unceasingly available restructuring and the code generation function se t permits you in a higher rank the operation code, and automated usual code intensity duty and easy wrong duty. Moreover, in develops the code and uses JDT to compile and to carry out the JUnit test built-in support carries on the unit testing after the co de, may use Eclipse the first-class Java debugger debugging when the movement meets any question. Besides JDT, Eclipse SDK- the most popular downloading - also contains Plug-in Development Environment(PDE). PDE used the specific function to expand JDT to construct the Eclipse plug-in unit - based on the Eclipse application procedure basic construction agglomeration. In fact, uses the tool which provides by Eclipse itself to be able to surmount the Java development, may expand the existing Eclipse application procedure, or even founds the brand-new application procedure.Eclipse by a script level constitution, contains in many functional modules or the Eclipse terminology so-called “the plug-in unit”. The plug-in unit is provides all functions in the Eclipse application procedure the module. They cooperate through its API to pay the final outcome together. In Eclipse, even the most foundation's function, for instance the search and the start installment's plug-in unit, seals in the plug-in unit. In order to expand the existing Eclipse function or carry on the construction in above, the plug-in unit the concrete expansion contribution for the expansion spot which will expose by other plug-in units. Usually, the plug-in unit concentrates the specific region responsibility, and gives through or a many expansion way other responsibility designation other plug-in units. For example, aplug-in unit allows you parallel to compare two documents visibly the contents, but it will not care how to read these do cuments even how to explain these document structure; This is other plug-in unit's work. When compared with two documents, this plug-in unit first inspects whether to have another plug-in unit to be possible to explain these document structure. If found one, it to the plug-in unit inquiry related file organization information which found, and used this information in the comparison process.May see that the modular construction was Eclipse has provided the huge flexibility, and provided one to be possible to support the massive application procedure platform which the original design has not expected.4 Structs function synopsisStruts is a MVC frame (Framework), uses in developing Java fast the Web application. Struts realizes the key point in C(Controlle r), Action which and we have custom-made including ActionServlet/RequestProcessor, was also V(View) provides a series of rows to have custom-made the label (Custom Tag). Spring is a light vessel (light-weight container), its core is the Bean factory (Bean Factory), with constructs M(Model) which we need. Above this foundation, Spring has provided AOP (Aspect-Oriented Programming, face stratification plane programming) realization, provides under the non-management environment with it to declare services and so on way business, security; Is more convenient to Bean factory expansion ApplicationContext we to realize the J2EE application; DAO/ORM realizes facilitates us to carry on the database the development; Web MVC and Spring Web have provided Java the Web application frame or carries on the integration with other popular Web frame. That is may a both use, achieve both own characteristic carries on supplementary.Structs is the kind which, servlet and the JSP mark a group cooperates mutually, they compose the MVC 2 designs which may entrust with heavy responsibility. This definition expressed that Struts is a frame, but is not a storehouse, but Struts has also contained the rich mark storehouse and the independence in this frame work utility program class.Client browser (customer browser), the request founds an event from customer browser's each HTTP. The Web vessel will use a HTTP response to make the response.Controller (controller), the controller receive from browser's request, and decided that sends out where this request. Speaking of Struts, the controller is an order design pattern which realizes by servlet. struts-config.xml document disposition controller.Service logic, the service logic renewal model's condition, and helps the control application procedure the flow. Speaking of Struts, this is through takes the actual service logic “thin” the packing Action kind to complete.Model (model) condition, model expression application procedure condition. Service object renewal application procedure c ondition. ActionForm bean inconversation level or request level expression model condition, but is not in the lasting level. The JSP document uses JSP to mark the read from the ActionForm bean information.View (view), the view is a JSP document. And doe s not have the flow logic, does not have the service logic, also does not have the model information -- Only then marks. The mark causes Struts is different with other frames (for example Velocity) one of factors.Just like the Struts controller is (event usually is HTTP post) maps the event kind of servlet. you to expect - the air-operated controller use configuration files to cause you not to need to carry on to these values the hard code. The time has changed, but method as before.The Action kind, ActionForm maintains the Web application procedure the conversation condition. ActionForm is one abstract class, must found this kind of subclass for each input form model. When I said when input form model, what refers to the ActionForm expression is establi shes or in the renewal general sense data by the HTML form.The Action kind is service logic packing. A Action kind of use is transforms HttpServletRequest into the service logic. Must use Action, please found its subclass and covers process () the method.ActionServlet (Command) will use perform () the method the parametrization kind to transmit for ActionForm. Still did not have too many repugnantrequest.getParameter () to transfer. When the event progresses to this step, the input form data (or HTML form data) has been withdrawn from the request class and shifts to the ActionForm kind.Considered that a Action kind of another way is the Adapter design pattern. The Action use will be “a kind of connection will transform another connection which will need for the client. Adapter enables the kind the joint operation, if does not have Adapter, then these kinds will be unable because of the incompatible connection the joint operation. In this example's client is ActionServlet, it knows nothing about to our concrete service class connection. Therefore, Struts has provided a service connection which it can understand, namely Action. Through expands Action, we cause our service connection and the Struts service connection maintain compatible.5 CSS synopsisThe CSS edition method is the same with HTML, may also be any text editor or the homepage edition software, but also has uses for to edit CSS specially the software. If you write the CSS sentence regards the exterior cascading style sheet, but transfers in the HTML document, then its extension saves .css to be possible. Initially the technical personnel found out HTML, mainly stresses on the definition content, for instance expressed that a paragraph, indicates the title, but excessively has not designed HTML the typesetting and the contact surface effect.Along with the Internet rapid development, HTML is widely applied, the surfer people hoped certainly that the homepage makes attractive, therefore the HTMLtypesetting and the contact surface effect's limitat ion exposes day by day. In order to solve this problem, the people also took many tortuous paths, has used some not good method, for instance increases many attribute results to HTML becomes the code very extremely fat, turns the picture the text, excessiv ely many comes the typesetting using Table, expresses the white space with the blank picture and so on. Appears until CSS.CSS may be a homepage design breakthrough, it has solved the homepage contact surface typesetting difficult problem. May such say th at HTML Tag is mainly defines the homepage content (Content), but CSS decided how these homepage content does demonstrate (Layout). The CSS English is Cascading Style Sheets, Chinese may translate the tandem cascading style sheet. CSS may divide into three kinds according to its position: In inlays the style (Inline Style), internal cascading style sheet (Internal Style Sheet), exterior cascading style sheet (External Style Sheet).6 HTML function synopsisHyper Text Markup the Language hypertext mark language is one kind uses for to manufacture the hypertext documents the simple mark language. The hypertext documents which compiles with HTML are called the HTML documents, it can the independence in each kind of operating system platform (for example UNIX, WINDOWS and so on). HTML has served as since 1990 on World Wide Web the information to express the language, uses in describing the Homepage form design and it and on WWW the other Homepage linked information.The HTML documents (i.e. the Homepage source document) was one has laid aside the mark ASCII text document, usually it had .html or the .htm document extension. Produces HTML documents mainly to have the following three ways: 1. the manual direct compilation (e.g. ASCII text editor which or other HTM L edition tool likes with you). 2. will have other form documents through certain format conversion tool (for example the WORD documents) to transform the HTML documents. 3. by the Web server (or said that the HTTP server) one only thenreal-time dynamic produces. the HTML language is through uses each kind of mark (tags) to mark the documents the structure as well as marks the ultra chain (Hyperlink) the information.Although the HTML language described the documents structure form, but how can't define the documents information to precisely demonstrate and arrange, but is only suggested how the Web browser (for example Mosiac, Netscape and so on) should demonstrate and arrange these information, is decided finally in front of user's demonstration result b y the Web browser's demonstration style and to the mark explanatory ability. Why is the identical documents the effect which demonstrated in the different browser meets is dissimilar. At present the HTML language's edition is 2.0, it is based on SGML (Stan dard Generalized Markup Language, standard sets at sign language generally, as soon as is applies mechanically describes digitized documents structure and manages its contentcomplex standard) a subset to evolve comes. Although in next edition's standard HTML3.0 (is also called HTML+) to draw up, but some the partial experimental nature draft standard widely has been used, the mostly outstanding Web browser (for example Netscape and so on) can explain in the HTML3.0 part new mark, therefore introduced in this chapter some HTML3.0 new mark has been accepted by the most browsers.7 Js script language synopsisJS is javascrip, Javascript is one kind the script language which comes by the Netscape LiveScript development, the main purpose is to solve the server terminal language, for instance Perl, carry-over speed question. At that time served the end t o need to carry on the confirmation to the data, because the network speed was quite slow, only then 28.8kbps, the confirmation step waste's time were too many. Therefore Netscape browser Navigator has joined Javascript, has provided the data confirmation basic function.The JavaScript official name is “ECMAScript”. This standard by ECMA organization development and maintenance. ECMA-262 is the official JavaScript standard. This standard based on JavaScript (Netscape) and JScript (Microsoft). Netscape (Navigator 2.0) Brendan Eich has invented this language, started from 1996, already appeared in all Netscape and in the Microsoft browser. TheECMA-262 development be gan in 1996, in 1997 July, the ECMA general meeting has accepted its first edition.Script script uses one specific descriptive language, rests on certain form compilation to be possible the execution document, is also called as great or the batch run document. The script usually may transfer temporarily by the application procedure and carry out. Each kind of script present widely is applied in the homepage design, because the script not only may reduce the homepage the scale and raises the homepage browsing speed, moreover may enrich the homepage performance, like animation, sound and so on. Cites a most common example, when we click in the homepage the E-mail address can transfer Outlook Express or the Foxmail this kind of mail software automatically, is realizes through the script function. Also because of script these characteristics, the human who harbors ulterior motives by some are often using. For example joins some destruction computer system's order in the script, like this works as the user brows ing homepage, once transfers this kind of script, will then cause the user the system to come under the attack. Therefore the user should act according to visits homepage the trust degree selective security rank, specially regarding these itself content on the illegal homepage, do not permit the use script easily. Through “the safe establishment” the dialog box, the choice “the script” under option each kind of establishment may with ease realize to script being forbid and begins using.Present's script language is quite many, script language execution generallyonly with concrete explanation actuator related, so long as therefore on the system has the corresponding language interpreter to be possible to achieve the crossplatform. Script (Script), is includes order and so on bind and alias sets, you may save this set are an independent document then in the time which needs carries out, like this may facilitate you in the CS use. The script may save for the suffix named .cfg document places under the cstrike folder, when execution in control bench input: exec (script filename) .cfg then. For instance saves a script is the buys.cfg document, inputs in the control bench: execbuys.cfg may realize the function which we need. Must realize an order, so long as is g ood this process definition (alias), and assigns a key position for this order, so long as later according to will assign the good key position, may realize this process. All scripts are realize through this method.。

外文文献原文THE TECHNIQUE DEVELOPMENT HISTORY OF JSPThe Java Server Pages( JSP) is a kind of according to web of the script plait distance technique, similar carries the script language of Java in the server of the Netscape company of server- side JavaScript( SSJS) and the Active Server Pages(ASP) of the Microsoft. JSP compares the SSJS and ASP to have better can expand sex, and it is no more exclusive than any factory or some one particular server of Web. Though the norm of JSP is to be draw up by the Sun company of, any factory can carry out the JSP on own system.The After Sun release the JSP( the Java Server Pages) formally, the this kind of new Web application development technique very quickly caused the people's concern. JSP provided a special development environment for the Web application that establishes the high dynamic state. According to the Sun parlance, the JSP can adapt to include the Apache WebServer, IIS4.0 on the market at inside of 85% server product.This chapter will introduce the related knowledge of JSP and Databases, and JavaBean related contents, is all certainly rougher introduction among them basic contents, say perhaps to is a Guide only, if the reader needs the more detailed information, pleasing the book of consult the homologous JSP.1.1 GENERALIZEThe JSP(Java Server Pages) is from the company of Sun Microsystems initiate, the many companies the participate to the build up the together of the a kind the of dynamic the state web the page technique standard, the it have the it in the construction the of the dynamic state the web page the strong but the do not the especially of the function. JSP and the technique of ASP of the Microsoft is very alike. Both all provide the ability that mixes with a certain procedure code and is explain by the language engine to carry out the procedure code in the code of HTML. Underneath we are simple of carry on the introduction to it.JSP pages are translated into servlets. So, fundamentally, any task JSP pages can perform could also be accomplished by servlets. However, this underlying equivalence does not mean that servlets and JSP pages are equally appropriate in all scenarios. The issue is not the power of the technology, it is the convenience, productivity, and maintainability of one or the other. After all, anything you can do on a particular computer platform in the Java programming language you could also do in assembly language. But it still matters which you choose.JSP provides the following benefits over servlets alone:• It is easier to write and maintain the HTML. Your static code is ordinary HTML: no extra backslashes, no double quotes, and no lurking Java syntax.• You can use standard Web-site development tools. Even HTML tools that know nothing about JSP can be used because they simply ignore the JSP tags.• You can divide up your development team. The Java programmers can work on the dynamic code. The Web developers can concentrate on the presentation layer. On large projects, this division is very important. Depending on the size of your team and the complexity of your project, you can enforce a weaker or stronger separation between the static HTML and the dynamic content.Now, this discussion is not to say that you should stop using servlets and use only JSP instead. By no means. Almost all projects will use both. For some requests in your project, you will use servlets. For others, you will use JSP. For still others, you will combine them with the MVC architecture . You want the appropriate tool for the job, and servlets, by themselves, do not complete your toolkit.1.2 SOURCE OF JSPThe technique of JSP of the company of Sun, making the page of Web develop the personnel can use the HTML perhaps marking of XML to design to turn the end page with format. Use the perhaps small script future life of marking of JSP becomes the dynamic state on the page contents.( the contents changes according to the claim of)The Java Servlet is a technical foundation of JSP, and the large Web applies the development of the procedure to need the Java Servlet to match with with the JSP and then can complete, this name of Servlet comes from the Applet, the local translation method of now is a lot of, this book in order not to misconstruction, decide the direct adoption Servlet but don't do any translation, if reader would like to, can call it as" small service procedure". The Servlet is similar to traditional CGI, ISAPI, NSAPI etc. Web procedure development the function of the tool in fact, at use the Java Servlet hereafter, the customer need not use again the lowly method of CGI of efficiency, also need not use only the ability come to born page of Web of dynamic state in the method of API that a certain fixed Web server terrace circulate. Many servers of Web all support the Servlet, even not support the Servlet server of Web directly and can also pass the additional applied server and the mold pieces to support the Servlet. Receive benefit in the characteristic of the Java cross-platform, the Servlet is also a terrace irrelevant, actually, as long as match the norm of Java Servlet, the Servlet is complete to have nothing to do with terrace and is to have nothing to do with server of Web. Because the Java Servlet is internal to provide the service by the line distance, need not start a progress to the each claimses, and make use of the multi-threadingmechanism can at the same time for several claim service, therefore the efficiency of Java Servlet is very high.But the Java Servlet also is not to has no weakness, similar to traditional CGI, ISAPI, the NSAPI method, the Java Servlet is to make use of to output the HTML language sentence to carry out the dynamic state web page of, if develop the whole website with the Java Servlet, the integration process of the dynamic state part and the static state page is an evil-foreboding dream simply. For solving this kind of weakness of the Java Servlet, the SUN released the JSP.A number of years ago, Marty was invited to attend a small 20-person industry roundtable discussion on software technology. Sitting in the seat next to Marty was James Gosling, inventor of the Java programming language. Sitting several seats away was a high-level manager from a very large software company in Redmond, Washington. During the discussion, the moderator brought up the subject of Jini, which at that time was a new Java technology. The moderator asked the manager what he thought of it, and the manager responded that it was too early to tell, but that it seemed to be an excellent idea. He went on to say that they would keep an eye on it, and if it seemed to be catching on, they would follow his company's usual "embrace and extend" strategy. At this point, Gosling lightheartedly interjected "You mean disgrace and distend."Now, the grievance that Gosling was airing was that he felt that this company would take technology from other companies and suborn it for their own purposes. But guess what? The shoe is on the other foot here. The Java community did not invent the idea of designing pages as a mixture of static HTML and dynamic code marked with special tags. For example, Cold Fusion did it years earlier. Even ASP (a product from the very software company of the aforementioned manager) popularized this approach before JSP came along and decided to jump on the bandwagon. In fact, JSP not only adopted the general idea, it even used many of the same special tags as ASP did.The JSP is an establishment at the model of Java servlets on of the expression layer technique, it makes the plait write the HTML to become more simple.Be like the SSJS, it also allows you carry the static state HTML contents and servers the script mix to put together the born dynamic state exportation. JSP the script language that the Java is the tacit approval, however, be like the ASP and can use other languages( such as JavaScript and VBScript), the norm of JSP also allows to use other languages.1.3 JSP CHARACTERISTICSIs a service according to the script language in some one language of the statures system this kind of discuss, the JSP should be see make is a kind of script language.However, be a kind of script language, the JSP seemed to be too strong again, almost can use all Javas in the JSP.Be a kind of according to text originally of, take manifestation as the central development technique, the JSP provided all advantages of the Java Servlet, and, when combine with a JavaBeans together, providing a kind of make contents and manifestation that simple way that logic separate. Separate the contents and advantage of logical manifestations is, the personnel who renews the page external appearance need not know the code of Java, and renew the JavaBeans personnel also need not be design the web page of expert in hand, can use to take the page of JavaBeans JSP to define the template of Web, to build up a from have the alike external appearance of the website that page constitute. JavaBeans completes the data to provide, having no code of Java in the template thus, this means that these templates can be written the personnel by a HTML plait to support. Certainly, can also make use of the Java Servlet to control the logic of the website, adjust through the Java Servlet to use the way of the document of JSP to separate website of logic and contents.Generally speaking, in actual engine of JSP, the page of JSP is the edit and translate type while carry out, not explain the type of. Explain the dynamic state web page development tool of the type, such as ASP, PHP3 etc., because speed etc. reason, have already can't satisfy current the large electronic commerce needs appliedly, traditional development techniques are all at to edit and translate the executive way change, such as the ASP → ASP+;PHP3 → PHP4.In the JSP norm book, did not request the procedure in the JSP code part( be called the Scriptlet) and must write with the Java definitely. Actually, have some engines of JSP are adoptive other script languages such as the EMAC- Script, etc., but actually this a few script languages also are to set up on the Java, edit and translate for the Servlet to carry out of. Write according to the norm of JSP, have no Scriptlet of relation with Java also is can of, however, mainly lie in the ability and JavaBeans, the Enterprise JavaBeanses because of the JSP strong function to work together, so even is the Scriptlet part not to use the Java, edit and translate of performance code also should is related with Java.1.4 JSP MECHANISMTo comprehend the JSP how unite the technical advantage that above various speak of, come to carry out various result easily, the customer must understand the differentiation of" the module develops for the web page of the center" and" the page develops for the web page of the center" first.The SSJS and ASP are all in several year ago to release, the network of that time is still very young, no one knows to still have in addition to making all business, datas and the expression logic enter the original web page entirely heap what better solvethe method. This kind of model that take page as the center studies and gets the very fast development easily. However, along with change of time, the people know that this kind of method is unwell in set up large, the Web that can upgrade applies the procedure. The expression logic write in the script environment was lock in the page, only passing to shear to slice and glue to stick then can drive heavy use. Express the logic to usually mix together with business and the data logics, when this makes be the procedure member to try to change an external appearance that applies the procedure but do not want to break with its llied business logic, apply the procedure of maintenance be like to walk the similar difficulty on the eggshell. In fact in the business enterprise, heavy use the application of the module already through very mature, no one would like to rewrite those logics for their applied procedure.HTML and sketch the designer handed over to the implement work of their design the Web plait the one who write, make they have to double work-Usually is the handicraft plait to write, because have no fit tool and can carry the script and the HTML contents knot to the server to put together. Chien but speech, apply the complexity of the procedure along with the Web to promote continuously, the development method that take page as the center limits sex to become to get up obviously.At the same time, the people always at look for the better method of build up the Web application procedure, the module spreads in customer's machine/ server the realm. JavaBeans and ActiveX were published the company to expand to apply the procedure developer for Java and Windows to use to come to develop the complicated procedure quickly by" the fast application procedure development"( RAD) tool. These techniques make the expert in the some realm be able to write the module for the perpendicular application plait in the skill area, but the developer can go fetch the usage directly but need not control the expertise of this realm.Be a kind of take module as the central development terrace, the JSP appeared. It with the JavaBeans and Enterprise JavaBeans( EJB) module includes the model of the business and the data logic for foundation, provide a great deal of label and a script terraces to use to come to show in the HTML page from the contents of JavaBeans creation or send a present in return. Because of the property that regards the module as the center of the JSP, it can drive Java and not the developer of Java uses equally. Not the developer of Java can pass the JSP label( Tags) to use the JavaBeans that the deluxe developer of Java establish. The developer of Java not only can establish and use the JavaBeans, but also can use the language of Java to come to control more accurately in the JSP page according to the expression logic of the first floor JavaBeans.See now how JSP is handle claim of HTTP. In basic claim model, a claimdirectly was send to JSP page in. The code of JSP controls to carry on hour of the logic processing and module of JavaBeanses' hand over with each other, and the manifestation result in dynamic state bornly, mixing with the HTML page of the static state HTML code. The Beans can be JavaBeans or module of EJBs. Moreover, the more complicated claim model can see make from is request other JSP pages of the page call sign or Java Servlets.The engine of JSP wants to chase the code of Java that the label of JSP, code of Java in the JSP page even all converts into the big piece together with the static state HTML contents actually. These codes piece was organized the Java Servlet that customer can not see to go to by the engine of JSP, then the Servlet edits and translate them automatically byte code of Java.Thus, the visitant that is the website requests a JSP page, under the condition of it is not knowing, an already born, the Servlet actual full general that prepared to edit and translate completes all works, very concealment but again and efficiently. The Servlet is to edit and translate of, so the code of JSP in the web page does not need when the every time requests that page is explain. The engine of JSP need to be edit and translate after Servlet the code end is modify only once, then this Servlet that editted and translate can be carry out. The in view of the fact JSP engine auto is born to edit and translate the Servlet also, need not procedure member begins to edit and translate the code, so the JSP can bring vivid sex that function and fast developments need that you are efficiently.Compared with the traditional CGI, the JSP has the equal advantage. First, on the speed, the traditional procedure of CGI needs to use the standard importation of the system to output the equipments to carry out the dynamic state web page born, but the JSP is direct is mutually the connection with server. And say for the CGI, each interview needs to add to add a progress to handle, the progress build up and destroy by burning constantly and will be a not small burden for calculator of be the server of Web. The next in order, the JSP is specialized to develop but design for the Web of, its purpose is for building up according to the Web applied procedure, included the norm and the tool of a the whole set. Use the technique of JSP can combine a lot of JSP pages to become a Web application procedure very expediently.JSP six built-in objectsrequest for:The object of the package of information submitted by users, by calling the object corresponding way to access the information package, namely the use of the target users can access the information.response object:The customer's request dynamic response to the client sent the data.session object1. What is the session: session object is a built-in objects JSP, it in the first JSP pages loaded automatically create, complete the conversation of management.From a customer to open a browser and connect to the server, to close the browser, leaving the end of this server, known as a conversation.When a customer visits a server, the server may be a few pages link between repeatedly, repeatedly refresh a page, the server should bethrough some kind of way to know this is the same client, which requires session object.2. session object ID: When a customer's first visit to a server on the JSP pages, JSP engines produce a session object, and assigned aString type of ID number, JSP engine at the same time, the ID number sent to the client, stored in Cookie, this session objects, and customers on the establishment of a one-to-one relationship. When a customer to connect to the server of the other pages, customers no longer allocated to the new session object, until, close your browser, the client-server object to cancel the session, and the conversation, and customer relationship disappeared. When a customer re-open the browser to connect to the server, the server for the customer to create a new session object.aplication target1. What is the application:Servers have launched after the application object, when a customer to visit the site between the various pages here, this application objects are the same, until the server is down. But with the session difference is that all customers of the application objects are the same, that is, all customers share this built-in application objects.2. application objects commonly used methods:(1) public void setAttribute (String key, Object obj): Object specified parameters will be the object obj added to the application object, and to add the subject of the designation of a keyword index.(2) public Object getAttribute (String key): access to application objects containing keywords for.out targetsout as a target output flow, used to client output data. out targets for the output data.Cookie1. What is Cookie:Cookie is stored in Web server on the user's hard drive section of the text. Cookie allow a Web site on the user's computer to store information on and then get back to it.For example, a Web site may be generated for each visitor a unique ID, and then to Cookie in the form of documents stored in each user's machine.If you use IE browser to visit Web, you will see all stored on your hard drive on the Cookie. They are most often stored in places: c: \ windows \ cookies (in Window2000 is in the C: \ Documents and Settings \ your user name \ Cookies).Cookie is "keyword key = value value" to preserve the format of the record.2. Targets the creation of a Cookie, Cookie object called the constructor can create a Cookie. Cookie object constructor has two string .parameters: Cookie Cookie name and value.Cookie c = new Cookie ( "username", "john");3. If the JSP in the package good Cookie object to send to the client, the use of the response addCookie () method.Format: response.addCookie (c)4. Save to read the client's Cookie, the use of the object request getCookies () method will be implemented in all client came to an array of Cookie objects in the form of order, to meet the need to remove the Cookie object, it is necessary to compare an array cycle Each target keywords.JSP的技术发展历史Java Server Pages(JSP)是一种基于web的脚本编程技术，类似于网景公司的服务器端Java脚本语言—— server-side JavaScript(SSJS)和微软的Active Server Pages(ASP)。

外文文献JSP Technology and ServletsJSP profileJSP (JavaServer Pages) is initiated by Sun Microsystems , Inc., with many companies to participate in the establi shment of a dynamic web page technical standards. JSP tec hnology somewhat similar to ASP technology, it is in the traditional HTML web page document (*. htm, *. html) to insert the Java programming paragraph (Scriptlet) and JSP tag (tag), thus JSP documents (*. jsp). Using JSP devel opment of the Web application is cross that can run on Linux, is also available for other operating systems.JSP technology to use the Java programming language pr epared by the category of XML tags and scriptlets, to pr oduce dynamic pages package processing logic. Page also vi sit by tags and scriptlets exist in the services side of the resources of logic. JSP page logic and web page de sign and display separation, support reusable component-base d design, Web-based application development is rapid and e asy.Web server in the face of visits JSP page request, t he first implementation of the procedures of, and then to gether with the results of the implementation of JSP docu ments in HTML code with the return to the customer. Inse rt the Java programming operation of the database can be reoriented websites, in order to achieve the establishmen t of dynamic pages needed to function.JSP and Java Servle t, is in the implementation of the server, usually return ed to the client is an HTML text, as long as the clien t browser will be able to visit.JSP 1.0 specification of the final version is launched in September 1999, December has introduced 1.1 specifications. At present relatively new is JSP1.2 norms, JSP2.0 n orms of the draft has also been introduced.JSP pages from HTML code and Java code embedded in one of the compone nts.JS script language synopsisJS is javascrip, Javascript is one kind the script la nguage which comes by the Netscape LiveScript development, the main purpose is to solve the server terminal langua ge, for instance Perl, carry-over speed question. At that time served the end to need to carry on the confirmati on to the data, because the network speed was quite slow , only then 28.8kbps, the confirmation step waste's time were too many. Therefore Netscape browser Navigator has jo ined Javascript, has provided the data confirmation basic function.The JavaScript official name is “ECMAScript”. This st andard by ECMA organization development and maintenance. EC MA262 is the official JavaScript standard. This standard b ased on JavaScript (Netscape) and JScript (Microsoft). Nets cape (Navigator 2.0) Brendan Eich has invented this langua ge, started from 1996, already appeared in all Netscape a nd in the Microsoft browser. The ECMA262 development began in 1996, in 1997 July, the ECMA general meeting has ac cepted its first edition.The script uses one specific descriptive language, rest s on certain form compilation to be possible the executio n document, is also called as great or the batch run do cument. The script usually may transfer temporarily by the application procedure and carry out. Each kind of script present widely is applied in the homepage design, becaus e the script not only may reduce the homepage the scaleand raises the homepage browsing speed, moreover may enr ich the homepage performance, like animation, sound and soon. Cites a most common example, when we click in the homepage the Email address can transfer Outlook Express or the Foxmail this kind of mail software automatically, is realizes through the script function. Also because of script these characteristics, the human who harbors ulterio r motives by some are often using. For example joins som e destruction computer system's order in the script, like this works as the user browsing homepage, once transfers this kind of script, will then cause the user the syst em to come under the attack. Therefore the user should a ct according to visits homepage the trust degree selective security rank, specially regarding these itself content o n the illegal homepage, do not permit the use script eas ily. Through “the safe establishment”the dialog box, th e choice “the script”under option each kind of establi shment may with ease realize to script being forbid and begins using.JSP and ServletsThe technology of JSP and Servlet is the most importa nt technology which use Javatechnology to exploit request of server, and it is al so the standard which exploit business application .Java d evelopers prefer to use it for a variety of reasons, one of which is already familiar with the Java language for the development of this technology are easy to learn Ja va to the other is "a preparation, run everywhere" to br ing the concept of Web applications, To achieve a "one-pr epared everywhere realized." And more importantly, if follo wed some of the principles of good design, it can be sa id of separating and content to create high-quality, reusa ble, easy to maintain and modify the application. For exa mple, if the document in HTML embedded Java code too much (script), will lead the developed application is extreme ly complex, difficult to read, it is not easy reuse, but also for future maintenance and modification will also c ause difficulties. In fact, CSDN the JSP / Servlet forum, can often see some questions, the code is very long, c an logic is not very clear, a large number of HTML and Java code mixed together. This is the random development of the defects.Early dynamic pages mainly CGI (Common Gateway Interfac e, public Gateway Interface) technology, you can use diffe rent languages of the CGI programs, such as VB, C / C + + or Delphi, and so on. Though the technology of CGI is developed and powerful, because of difficulties in pr ogramming, and low efficiency, modify complex shortcomings, it is gradually being replaced by the trend. Of all th e new technology, JSP / Servlet with more efficient and easy to program, more powerful, more secure and has a go od portability, they have been many people believe that t he future is the most dynamic site of the future develop ment of technology.Similar to CGI, Servlet support request / response mod el. When a customer submit a request to the server, the server presented the request Servlet, Servlet responsible for handling requests and generate a response, and then gave the server, and then from the server sent to the customer. And the CGI is different, Servlet not generate a new process, but with HTTP Server at the same proces s. It threads through the use of technology, reduce the server costs. Servlet handling of the request process is this: When received from the client's request, calling ser vice methods, the method of Servlet arrival of the first judgement is what type of request (GET / POST / HEAD…), then calls the appropriate treatment (DoGet / doPost / doHead…) and generate a response.Although such a complex, in fact, simply said to Serv let is a Java class. And the general category of the di fference is that this type operating in a Servlet contain er, which can provide session management and targeted life cycle management. So that when you use the Servlet, you can get all the benefits of the Java platform, including the safety of the management, use JDBC access the datab ase and crossplatform capability. Moreover, Servlet using t hread, and can develop more efficient Web applications.JSP technology is a key J2EE technology, it at a hig her level of abstraction of a Servlet. It allows conventi onal static and dynamic HTML content generated by combinin g an HTML page looks like, but as a Servlet to run. Th ere are many commercial application server support JSP tec hnology, such as BEA WebLogic, IBM WebSphere, JRun, and s o on. JSP and Servlet use more than simple. If you have a JSP support for Web servers, and a JSP document, you can put it Fangdao any static HTML files can be placed , do not have to compile, do not have to pack, do not have to ClassPath settings, you can visit as ordinary W eb It did visit, the server will automatically help you to do other work.JSP document looks like an ordinary static HTML docume nt, but inside contains a number of Java code. It uses. Jsp the suffix, used to tell the server this document in need of special treatment. When we visit a JSP page, the document will first be translated into a JSP engine Java source files, is actually a Servlet, and compiler, and then, like other Servlet, from Servlet engine to ha ndle. Servlet engine of this type loading, handling requests from customers, and the results returned to the custom er.After another visit this page to the customer, as lon g as the paper there have been no changes, JSP engine h as been loaded directly call the Servlet. If you have al ready been modified, it will be once again the implementa tion of the above process, translate, compile and load. I n fact, this is the so-called "first person to punishment ." Because when the first visit to the implementation of a series of the above process, so will spend some time after such a visit would not.Java servlets offer a powerful API that provides acces s to all the information about the request, the session, and the application. combining JSP with servlets lets yo u clearly separate the application logic from the presenta tion of the application; in other words, it lets you use the most appropriate component type for the roles of Model, View and Controller.Servlets, Filters, and ListenersA servlet is a Java class that extends a server with functionality for processing a request and producing a r esponse. It's implemented using the classes and interfaces defined by the Servlet API. The API consists of two pa ckages: the javax.servlet package contains classes and inte rfaces that are protocolindependent, while the javax.servlet .http package provides HTTP-specific extensions and utility classes.What makes a servlet a servlet is that the class imp lements an interface named javax.servlet.Servlet, either dir ectly or by extending one of the support classes. This i nterface defines the methods used by the web container to manage and interact with theservlet. A servlet for processing HTTP requests typically extends thejavax.servlet.http.HttpServlet class. This class implements the Servlet interface and provides additional methods suita ble for HTTP processing.Servlet LifecycleThe web container manages all aspects of the servlet's l ifecycle. It creates an instance of the servlet class whe n needed, passes requests to the instance for processing, and eventually removes the instance. For an HttpServlet, the container calls the following methods at the appropr iate times in the servlet lifecycle.Besides the doGet( ) and doPost( ) methods, there are m ethods corresponding to the other HTTP methods: doDelete( ), doHead( ), doOptions( ), doPut( ), and doTrace( ). Ty pically you don't implement these methods; the HttpServle t class already takes care of HEAD, OPTIONS, and TRACE r equests in a way that's suitable for most servlets, and the DELETE and PUT HTTP methods are rarely used in a we b application.It's important to realize that the container creates o nly one instance of each servlet. This means that the se rvlet must be thread safe - able to handle multiple requ ests at the same time, each executing as a separate thre ad through the servlet code. Without getting lost in deta ils, you satisfy this requirement with regards to instance variables if you modify the referenced objects only in the init( ) and destroy( ) methods, and just read them in the request processing methods.Compiling and Installing a ServletTo compile a servlet, you must first ensure that you have the JAR file containing all Servlet API classes in the CLASSPATH environment variable. The JAR file is dist ributed with all web containers. Tomcat includes it in a file called servlet.jar, located in the common/lib direct ory. On a Windows platform, you include the JAR file in the CLASSPATH.Reading a RequestOne of the arguments passed to the doGet( ) and doPo st( ) methods is an object that implements the HttpServle tRequest interface. This interface defines methods that pro vide access to a wealth of information about the request.Generating a ResponseBesides the request object, the container passes an objec t that implements the HttpServletResponse interface as an argument to the doGet( ) and doPost( ) methods. This int erface defines methods for getting a writer or stream for the response body. It also defines methods for setting the response status code and headers.Using Filters and ListenersThe servlet specification defines two component types besi de servlets: filters and listeners. These two types were introduced in the Servlet 2.3 specification, so if you're using a container that doesn't yet support this version of the specification, I'm afraid you're out of luck.FiltersA filter is a component that can intercept a requesttargeted for a servlet, JSP page, or static page, as well as the response before it's sent to the client. This makes it easy to centralize tasks that apply to all re quests, such as access control, logging, and charging for the content or the services offered by the application.A filter has full access to the body and headers of t he request and response, so it can also perform various transformations. One example is compressing the response bo dy if the Acceptlanguage request header indicates that th e client can handle a compressed response.A filter can be applied to either a specific servlet or to all requests matching a URL pattern, such as URL s starting with the same path elements or having the sam e extension.ListenersListeners allow your application to react to certain e vents. Prior to Servlet 2.3, you could handle only sessio n attribute binding events (triggered when an object was added or removed from a session). You could do this by letting the object saved as a sessionattributimplement the HttpSessionBindingListener interface. With the new interfa ces introduced in the 2.3 version of the specification, y ou can create listeners for servlet context and session l ifecycle events as well as session activation and passivat ion events (used by a container that temporarily saves se ssion state to disk or migrates a session to another ser ver). A newsession attribute event listener also makes it possible to deal with attribute binding events for all sessions in one place, instead of placing individual liste ner objects in each session.The new types of listeners follow the standard Java e vent model. In other words, a listener is a class that implements one or more of the listener interfaces. The interfaces define methods that correspond to events. The lis tener class is registered with the container when the app lication starts, and the container then calls the event m ethods at the appropriate times.Initializing Shared Resources Using a ListenerBeans like this typically need to be initialized befor e they can be used. Forinstance, they may need a reference to a database or some other external data source and may create an initi al information cache in memory to provide fast access eve n to the first request for data. You can include code f or initialization of the shared resources in the servlet and JSP pages that need them, but a more modular approac h is to place all this code in one place and let the other parts of the application work on the assumption tha t the resources are already initialized and available. An application lifecycle listener is a perfect tool for thi s type of resource initialization. This type of listener implements the javax.servlet.ServletContextListener interface , with methods called by the container when the applicati on starts and when it shuts down.Picking the Right Component Type for Each TaskThe Project Billboard application introduced is a fairl y complex application. Half the pages are pure controller and business logic processing, it accesses a database to authenticate users, and most pages require access control . In real life, it would likely contain even more pages, for instance, pages for access to a shared document arc hive, time schedules, and a set of pages for administrati on. As the application evolves, it may become hard to ma intain as a pure JSP application. It's easy to forget to include the access control code in new pages.This is clearly an application that can benefit from using a combination of JSP pages and the component types defined by the servlet specification for the MVC roles. Let's look at the main requirements and see how we can map them to appropriate component types:Database access should be abstracted, to avoid knowledg e of a specific dataschema or database engine in more than one part of the application: beans in the role of Model can be used to accomplish this.The database access beans must be made available to a ll other parts of theapplication when it starts: an application lifecycle event listener is the perfect component type for this task.Only authenticated users must be allowed to use the appli cation: a filter canperform access control to satisfy this requirement.Request processing is best done with Java code: a servlet, acting as the Controller fits the bill.It must be easy to change the presentation: this is where JSP shines, acting as the View.Adding servlets, listeners, and filters to the mix m inimizes the need for complex logic in the JSP pages. Pl acing all this code in Java classes instead makes it pos sible to use a regular Java compiler and debugger to fix potential problems.Centralized Request Processing Using a ServletWith a servlet as the common entry point for all a pplication requests, you gain control over the page flowof the application. The servlet can decide which type of response to generate depending on the outcome of the requested action, such as returning a common error page for all requests that fail, or different responses depending on the type of client making the request. With the hel p from some utility classes, it can also provide services such as input validation, I18N preparations, and in gene ral, encourage a more streamlined approach to request hand ling.Mapping Application Requests to the ServletThe first requirement for using a Controller servlet is that all requests must pass through it. This can be satisfied in many ways. If you have played around a bi t with servlets previously, you're probably used to invoki ng a servlet with a URI that starts with /myApp/servlet. This is a convention introduced by Suns Java Web Server (JWS), the first product to support servlets before the API was standardized. Most servlet containers support thi s convention today, even though it's not formally defined in the servlet specification.。

外文资料：Regard along with the network technology daily popularization and the information construction, now the school generally all compounded the test safe monitoring equipment, and has built the management information system in this foundation, to information construction positive impetus function. But has the software construction in the practical work to fall behind the phenomenon which constructs to the hardware, for example, the education administration level also pauses to examinee's inspection in the traditional test pattern, not only the efficiency is low, moreover also has many malpractices, creates the information resource the waste.Test non- paper, network, not only can effectively reduce the correlation personnel's work load, the better use computer and the network superiority, enhances the working efficiency, also can fairly cause the test, to be fair. Based on this kind of demand, we developed set of performance stably for the test design, safe have been reliable the network which, the ease of operation was allowed to satisfy massively simultaneously uses to take a test the system. Causes the test the security, fairness, fair greatly to enhance. After this system actual movement uses, effect good, not only greatly advanced the test information construction advancement, moreover causes the school to examinee's inspection more scientific, air, fair, to be highly effective and the network.The network test system should be able to satisfy the massive examinees in any place, any time all can participate in the test, and automatic judgment result. Through to the test service demand multianalysis, the main function which this system should provide as follows:1) The examinee may on-line carry on the test, after the test had finished by computer automatic judgment score, and the recording result, the examinee also may examine the standard answer. If the test time, the system automatic prompt completes an assignment and stops doing answers.2) The teacher may on-line establish the revision question bank, revises the examinee individual material, and monitors the examination place situation and so on.3) the manager may on-line establish reference material and so on the examinee, teacher, the verification question bank, arranges the examinee to take a test, revises the examinee and the examination place condition, inquires the examinee to take a test the result, monitors the examination place situation as well as theestablishment test project with tests the test question number and so on.Moreover for the guarantee test fair, is fair, the examination paper test question stochastically extracts by the computer from the question bank. For strictly will cease the test to cheat the behavior, the system later is best also should provide the function which the fingerprint confirmation will register.Its main flow is: After the user basis is authorized registers, the system basis user jurisdiction difference, establishes the corresponding operation. After the train attendant registers may carry on the test, operation and so on examination result and standard answer; After the teacher registers may carry on revises operation and so on examinee's individual material, revision question bank, revision user password as well as monitoring test situation; After the manager registers besides has teacher's all functions, but also may carry on the verification question bank (only has verified question bank only then to be allowed to carry on test),establishment operation and so on test time, inquiry, printing test result.Also may establish following several items:Test workstation: Carries on the test to the examinee the customer end procedure. Mainly provided has carried on according to the system disposition stochastically sets the topic of a composition, the confirmation registers, test function and so on time prompt, automatic judgment result, examination test result as well as standard answer. Test workstation divides into the customer end procedure and the Web way in the realization way, former allows the examinee (support touches screen test pattern) through the customer end procedure the way to carry on the test, latter allows the examinee to carry on the test through the test special-purpose network.The test establishes the workstation: Carries on the establishment tote test service the customer end procedure. Mainly provided the revision question bank, the verification question bank, revised the examinee material, establishes the examinee/examination place condition, the inquiry/printing test result, the question bank inducts/derives function and so on function as well as monitoring test situation.Test application server: Network on-line test system application server. Mainly has realized the data cushion and the test service logic seal and duplicate uses the function, is takes a test the workstation, the test establishes the workstation and the database server connection. Has provided the rich connection using the server, may increase or the reduced service rule through the module way, considered later will take a test the service promotion, also should reserve the new test type connectionusing the server level, will cause later the system to expand conveniently. Moreover, for guarantee test effectiveness, using server support hot backup database server pattern, namely if presently is using the database server breaks down, then in the system disposition reserve database server automatic cutover for the current database server, all these is does not know in the user with in the intervention situation carries on. Through application server level effectiveness, truly caused the test service to achieve the use easily, the function formidable, the performances table, the modular degree was strong, has satisfied the new time to an information construction higher request.Furthermore, considered the system the stability with carries out the efficiency, in the analysis network configuration foundation, the system later might select distributional three C/S and B/S will mix with the overhead construction method, namely: The examinee if miscarries on the test in this section, may choose the C/S structure to touch the screen test and the examination site test pattern; If the examinee is carries on the test in the outside areas, may choose the B/S structure the examination site test pattern.The network on-line test system needs to carry on the data through the network the transmission, therefore applies the server, the Web server and the database server security must from the system design time carries on the plan. We might use below the security measure:1) In stalls the reliable firewall, carries on the effective containment to the exterior malicious attack.2) The server (including applies server, database server and the Web server) the hard disk district transformation is the NTFS form, open sure sportive jurisdiction according to the different demand for the user.3) May write the essential code the DLL module, not only streng the need the security, simultaneously also caused the system the modular degree to strengthen, enhanced the system performance.4) May carry on two times of encryptions in the database to the essential data.5) 2,000 data backups with restores the function using SQL the SERVER, guarantees the database information the integrity and the security.The current software quite popular system structural model mainly has: C/S structural model and B/S structural model. These two kinds of structures may divide into two with the multilayered overhead con saturation, the main difference lies inwhether has used them idle ware (for example COM+ or CORBA) comes the overhead construction to apply the server level. This structural model unified distributional multilayered C/S and the B/S merit designs, divides into the customer level, business logic level and the data level in the usual situation.Customer level: Below mainly uses for to satisfy the overall system each kind of visit demand and processes works: The receive user's in put, carries on the analysis inspection to user's input and makes corresponding processing; Sends out the data to the server to request that, demonstrated by movement result which transmits using the server. The customer level usually is composed by the customer advancement, the customer advancement mainly includes the advancement in this model which the IE browser dynamic foundation the advancement as well as the customer end test workstation founds and so on.Business logic level: Will be responsible to receive the request which will transmit from the customer end or the tour and to request will bequeath the first floor to carry on processing, simultaneously will request the processing result transmission for the customer end or the brow ser. Business logic level advancement mainly is composed by middle ware MTS/COM+ as well as some related processing advancements.Microsoft Corporation has promoted Windows DNA under the Windows platform (Distributed inter Net Application Architecture, distribution network application structure) strategy. Takes Windows COM+ in the DNA strategy the middleware. In the Windows 2,000 above operating systems, COM+ has become a system part. COM+ was the intermediate level has characteristic provided the load balance, the object pond (Object Pooling), business characteristic and so on a series of force support, and the procedure which worked in COM+ receives the operating system the protection, thus the biggest guarantee system security, stable and was highly effective.In this model, mainly through the ADO realization data dynamic ration, ADO is the Microsoft current mainstream data accessing module, compares with the former data accessing technology, it has provided the extremely simple object model, and has sealed the complex first floor visit technology. Data level: Mainly provides the digital data service for business logic level, like the stored datum operating result, returns to the data retrieval result and so on.This structural model has overcome two C/S malpractice, fully has useddistributional multilayered C/S and the multilayered B/S merit, extremely good has used the existing network resources, and is to the existing network resources effective integration, the use as well as the expansion.Then what is XML?XML (eXtended Markup Language) is one kind of mark language, likes HTML which we is familiar with to be same, but the XML label is according to own needs to come by the people to have custom-made, in other words, any word and the character all may do for the label uses, so long as can the accurate expression data attribute. The accurate expression data meaning is the biggest advantage which XML brings. Moreover, the XML use text mode saves its form, is advantageous for between the procedure, the operating system links up, the exchange, the adapt ion at present the Internet development. XML appeared the short several years to obtain the widespread application, at present newly promotes software nearly could support XML. For example Microsoft Net series software, Office series software and so on. Does not leave for several years, XML can replace HTML to become on Internet the standard mark language?This system if introduces the XML language expression data the advantage, is causes in the system the customer end data demonstration and the system processing data separation, reduces the development system complex, reduces the system process time, reduces the network transmission quantity, thus enhances the system to carry out the efficiency. The unified modeling language (Unified Modeling Language, UML) is the object-oriented software standardized modeling language. Because its simple, is unified, also can express in the software design the tendency and the static information, at present already became the visible modeling language in fact industry standard.From enterprise information system to base on Web distributional application, even is strict real-time inserts the type system all suitably to come in handy UML to come the modeling. This is one kind of rich expression strength language, may describe each kind of view which the development needs, then take this as foundation assembly system. This system if introduces UML the main superiority enhances the software development efficiency, reduces the development time, saves the development cost. Take the UML language modeling should be by Rational Corporation's Rose tool as best. But Rose quite expensive, and Rose quite is huge, uses is not too convenient. Borland Corporation produces the ModelMaker modelingtool not only supports, moreover also has its original place in the object modeling. Therefore the modeling tool selects ModelMaker.翻译：随着网络技术的日益普及和信息化建设的出视，现在学校普遍都配制了考试安全监控设备，并在此基础上搭建了管理信息系统，对信息化建设起到了积极的推动作用。

外文资料所译外文资料：①作者：Dan Malks②书名：Professional JSP③出版时间: 2000.7.26④所译章节: Chapter 1212.1IntroductoryGood Web application design tries to separate business objects, presentation, and manipulation of the objects into distinct layers. One benefit of using JavaServer Pages technology is that it allows us to separate the role of a Web designer more clearly from that of a software developer. While on a small-scale project, one individual may occupy both roles, on a larger project, they are likely to be separate and it is beneficial to separate their workflows as much as possible. Designing the architecture for your Web application is crucial to this separation.12.2 JSP architectureWe will examine a variety of ways to architect a system with JavaServer Pages, servlets, and JavaBeans. We will see a series of different architectures, each a development of the one before. The diagram below shows this process in outline; the individual parts of the diagram will be explained in turn later in this article.JSP architecture:When Sun introduced Java Server Pages, some were quick to claim that servlets had been replaced as the preferred request handling mechanism in Web-enabled enterprise architectures. Although JSP is a key component of the Java 2 Platform Enterprise Edition (J2EE) specification, serving as the preferred request handler and response mechanism, we must investigate further to understand its relationship with servlets.Other sections of Professional JSP explain the implementation details of JSP source translation and compilation into a servlets. Understanding that JSP is built on top of the servlet API, and uses servlet semantics, raises some interesting questions. Should we no longer develop stand-alone servlets in our Web-enabled systems? Is there some way to combine servlets and JSPs? If so, where do we place our Java code? Are there any other components involved in the request processing, such as JavaBeans? If so, where do they fit into the architecture and what type of role do they fulfill?It is important to understand that, although JSP technology will be a powerful successor to basic servlets, they have an evolutionary relationship and can be used in a cooperative and complementary manner.Given this premise, we will investigate how these two technologies, each a Java Standard Extension, can be used co-operatively along with other components, such as JavaBeans, to create Java-based Web-enabled systems. We will examine architecturalissues as they relate to JSP and servlets and discuss some effective designs while looking at the tradeoffs of each. Before jumping directly into a discussion of specific architectures, though, we will briefly examine the need to develop a variety of architectures.12.3 Code factoring and role separationOne of the main reasons why the JavaServer Pages technology has evolved into what it is today (and it's still evolving) is the overwhelming technical need to simplify application design by separating dynamic content from static template display data. The foundation for JSP was laid down with the initial development of the Java Web Server from Sun, which used page compilation and focused on embedding HTML inside Java code. As applications came to be based more on business objects and n-tier architectures, the focus changed to separating HTML from Java code, while still maintaining the integrity and flexibility the technology provided.In Chapter 5, JSP Sessions, in Professional JSP, we saw how beans and objects can be bound to different contexts just by defining a certain scope. Good application design builds on this idea and tries to separate the objects, the presentation, and the manipulation of the objects into distinct, distinguishable layers.Another benefit of using JSP is that it allows us to more cleanly separate the roles of a Web production/HTML designer individual from a software developer. Remember that a common development scenario with servlets was to embed the HTML presentation markup within the Java code of the servlet itself, which can be troublesome. In our discussion, we will consider the servlet solely as a container for Java code, while our entire HTML presentation template is encapsulated within a JSP source page. The question then arises as to how much Java code should remain embedded within our JSP source pages, and if it is taken out of the JSP source page, where should it reside?Let's investigate this further. On any Web-based project, multiple roles and responsibilities will exist. For example, an individual who designs HTML pages fulfills a Web production role while someone who writes software in the Java programming language fulfills a software development role.On small-scale projects these roles might be filled by the same individual, or two individuals working closely together. On a larger project, they will likely be filled by multiple individuals, who might not have overlapping skill sets, and are less productive if made too dependent on the workflow of the other.If code that could be factored out to a mediating servlet is included instead within HTML markup, then the potential exists for individuals in the software development role and those in the Web production role to become more dependent than necessary on the progress and workflow of the other. Such dependencies may create a more error-prone environment, where inadvertent changes to code by other team members become more common.This gives us some insight into one reason why we continue to develop basic servlets: they are an appropriate container for our common Java code that has been factored out of our JSP pages, giving our software development team an area of focus that is as loosely coupled to our JSP pages as possible. Certainly, there will be a need for these same individuals to work with the JSP source pages, but the dependency is reduced, and these pages become the focus of the Web-production team instead. Of course, if the same individual fulfills both roles, as is typical on a smaller project, such dependencies are not a major concern.So, we should try to minimize the Java code that we include within our JSP page, in order to uphold this cleaner separation of developer roles. As we have discussed, some of this Java code is appropriately factored to a mediating servlet. Code that is common to multiple requests, such as authentication, is a good candidate for a mediating servlet. Such code is included in one place, the servlet, instead of potentially being cut and pasted into multiple JSPs.We will also want to remove much of our business logic and data access code from our JSP page and encapsulate it within JavaBeans, called worker or helper beans. We start to see a pattern of code movement from our JSP into two areas: a servlet (or JSP) that sits in front of the main JSP, and JavaBeans that sit in back. We refer to this common pattern as "Factor Forward -- Factor Back," as shown in the figure below:Factor Forward -- Factor Back:Another way to think about what code should be localized and encapsulated is that our JSP page should reveal as little as possible of our Java code implementation details.Rather, the page should communicate our intent by revealing the delegating messages we send to worker beans, instructing them to get state from a model, or to complete some business processing.12.4 Redirecting and forwardingRedirecting and forwarding requests in JSPs and servlets takes place often, and it is important to understand the subtle difference between these two mechanisms even though they achieve the same goal (that is, a client asks for a resource on the server and a different resource is served to it):●When a servlet or JSP resource chooses to redirect the client (using aresponse.sendRedirect(url)) the request object does not reach the second resource directly since the underlying implementation is an HTTP redirect.The server sends an HTTP 302 message back to the client telling it that the resource has moved to another URL, and that the client should access it there.The bottom line is that the lifecycle of the initial request object that was accessed in the first JSP terminates with the end of the service method in the first JSP, or with the reply from the server.●In a forward mechanism the request object is forwarded to the second resource,thus maintaining any object bindings to the request and its state, without a round trip to the client on the network. This allows the first JSP to do some work internally and then send information to the second JSP asking it to do itsbit. (Servlets used a chaining mechanism to do this). See Chapter 5, JSP Sessions, in Professional JSP to get a clearer picture of scope. JSPs and servlets can use the forwarding mechanism to delegate tasks among themselves, in the process of separating dynamic and static content.Now, let's investigate how we build these systems.12.5 ArchitecturesBefore discussing specific architectures that we can use to build systems with servlets and JSP, it is worth mentioning two basic ways of using the JSP technology. Each of the architectures discussed in this chapter will be based on one of these approaches:●The first method is referred to here as the page-centric (or client-server)approach. This approach involves request invocations being made directly to JSP page.●In the second method, the dispatcher (or n-tier) approach, a basic servlet orJSP acts as a mediator or controller, delegating requests to JSP pages and JavaBeans.We will examine these approaches in light of a simple example, which will evolve to satisfy the requirements of various scenarios. The initial scenario involves providing a Web interface for guessing statistics about a soon-to-be-born baby. The guesses are stored, and can be reviewed later by the parents, to see who has guessed the closest. As the requirement scenarios become more sophisticated, such as adding the desire for a persistence mechanism, the solution scenarios will become more sophisticated, as well. Thus, our example will evolve and we will gain an understanding of how the various architectures that we discuss will help us build a system that satisfies these requirements in an elegant and effective manner.12.6 The page-centric approachApplications built using a client-server approach have been around for some time; they consist of one or more application programs running on client machines and connecting to a server-based application to work. (A good example would be a PowerBuilder or Oracle Forms-based system.) CGIs and pre-servlet applications were generally based on this simple 2-tier model, and with the introduction of servlets, 2-tier applications could also be created in Java.This model allows JSPs or servlets direct access to some resource like a database or legacy application to service a client's request: the early JSP specifications termed this a "Model 1" programming approach. The JSP page is where the incoming request is intercepted and processed, and the response is sent back to the client;JSPs only differed from servlets in this scenario by providing cleaner code and separating code from the content by placing data access in beans.Model 1 programming approach:The advantage of such an approach is that it is siple to program,and allows the page author to Generate dynamic content easily,based upon the request and the state resources.However this architecture does not scale up well for a large number of simultaneous clients since there would be a significant amount of request processing to be performed,and each request must establish or share a potentially scarce/expensive connection to the resource in question.(A good example would be JDBC connectons in servlets or JSPs and the need for connection pools.) Indiscriminate usage of this architecture usually leads to a significant amount of Java code embedded within the JSP page,this may not seem to be much of a problem for Java developers but it is certainly an issue if the JSP pages are maintained by designers:the code tends to get in the designe’s way,and you run the risk of your code becoming corrupted when others are tweaking the look and feel.译文12.1前言好的Web应用设计试图将业务对象，简报以及操作对象分为不同的层面。

xx 理工大学xx 学院毕业设计(论文)外文资料翻译系：计算机系专业：计算机科学与技术姓名：xxx学号：080601165外文出处：Anon .The Introduction Of JSP [EB/OL].(用外文写)(2009-01-13)[2011-12-20].http://nibiye.com/fy/wwfy/jsjw/2009/0113/1033.html.附件：1.外文资料翻译译文；2.外文原文。

注：请将该封面与附件装订成册。

附件1：外文资料翻译译文关于JSP的介绍Java2企业版(J2EE)已经把建立一个网上的乱中有律任务的存在现象进行了有效的改造，就是开发人员能使用Java有效创造多层次的服务器端应用程序。

今天，Java企业应用程序编程接口已经扩大，包括许多方面：远程方法调用与公共对象请求代理体系结构用来远程对象的处理，JDBC（Java数据库的连接）的数据库交互，JNDI（Java命名和目录接口）来访问命名和目录服务，为企业创造了可重复使用的JavaBeans业务组件、JMS(Java信息服务)消息中介软件，JAXP为XML（可扩展标示语言）处理和JTA(Java事务应用程序界面)为执行一个原子事务。

此外，J2EE也支持小型服务程序，极受欢迎的Java语言代替了公共网关接口脚本。

这些技术的结合，可以让程序员创造分布式业务解决方案中的各种任务。

早在在1999年末，Sun Microsystems（美国一家计算机公司）添加了一个新的精选的元素企业Java工具：Java动态服务器页面(JSP)。

Java动态服务器页面都是建立在Java的顶部小型服务器用来增进效率使程序员，甚至是非专业的程序员，都可以创建网页的内容。

那么什么是Java服务器页呢？我们来简洁明点，Java的动态服务器页面是一个运用科学技术发展的网页，其中是包括动态内容的。

不像一个HTML页面，只包含静态内容，总是保持不变的，一个JSP页面中可以改变它的内容基于任何数量的变项，包括用户的身份，用户的浏览器类型，用户信息的提供，或者由用户选择信息等等。