811-003-02MT7-22SB6K7-18中文资料(Glenair)中文数据手册「EasyDatasheet - 矽搜」

®OCTAXIAL CONTACTSEthernet, SuperSpeed USB, HDMI, DisplayPort, SATAFEBRUARY 2018For Series 23 SuperNine ®, Series 80 Mighty Mouse, Series 28HiPer-D ®, Series 791, Series 792, ARINC 600 and EPXB Connectors®Glenair, Inc.1211 Air WayGlendale, CA 91201-2497818-247-6000*****************High-speed octaxial contacts for Ethernet, SuperSpeed USB and multi-gigabit datalinksHIGH-SPEED CONTACT TECHNOLOGYEl Ochito ® WhiteEl Ochito ® BlueEl Ochito ® Red10G Ethernet 1000BASE-T 10GBASE-TSuperSpeed USB 3.0HDMI SATA DisplayPortHigh speed, harsh environment El Ochito®octaxial contacts save size and weight. Suitable for aircraft avionics, weapons systems, satellites, radars,communications equipment and other aerospace/defense gear,El Ochito® contacts are optimized for 10G Ethernet, SuperSpeed USB and other multi-gigabit datalink protocols including HDMI, DisplayPort and SATA.El Ochito Type II Contacts24-26 AWG, Serviceable, Threaded Wire Shield Termination, Integral Contact Release Sleeve© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • • U.S. CAGE code 06324 • El Ochito ® Octaxial ContactsDimensions in Inches (millimeters) are subject to change without notice.1000BASE-T, 10GBASE-TSuperSpeed USBHDMI, DisplayPort, SATAData Pair IsolatorData Pair IsolatorFront InsulatorFront InsulatorOuter BodyOuter BodyAlignment KeyAlignment KeyContact Organizer InsulatorContact Organizer InsulatorSocket ContactsPin Contacts SleeveDielectric SleeveType I Pin Contact Type I Socket ContactData Pair Isolator Data Pair IsolatorFront InsulatorFront InsulatorOuter BodyOuter BodyAlignment KeyAlignment KeyContact Release SleeveContact Release SleeveContact Organizer InsulatorContact Organizer InsulatorSocket ContactsPin ContactsRetainer NutRetainer NutO-ringO-ringHeatshrink TubeHeatshrink TubeInner FerruleInner FerruleType II Socket Contact10GBASE-T El Ochito®SuperSpeed USBSATAEl Ochito®Red859-134(GS206)© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • • U.S. CAGE code 06324 • El Ochito®Octaxial Contacts© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • • U.S. CAGE code 06324 • El Ochito ® Octaxial Contacts Dimensions in Inches (millimeters) are subject to change without notice.5DimensionsEl Ochito ® Type I Pin Contact 858-003, 858-016, 858-028, and 858-030.920(23.37) MAXØ .276/.271(7.01/6.88).060 (1.52).033/.029 (0.84/0.74).305/.295(7.75/7.49)858-003, 858-028-01: .231 (5.87) HEX858-016, 858-028-02, 858-030: .265 (6.73) ROUNDØ .316/.313(8.03/7.95)Ø .219/.217(5.56/5.51)POLARIZATIONKEYPIN NO. DESIGNATION (NOT MARKED ONPART)CABLE (REF)12345678 SHIELD CRIMP FERRULEEl Ochito ® Type II Pin Contact 858-0051.625 (41.28) MAX Ø .316/.313(8.03/7.95)Ø .219/.217(5.56/5.51)CABLE (REF)HEATSHRINKTUBING.033/.029 (0.84/0.74).305/.295(7.75/7.49).060 (1.52)POLARIZATIONKEYPIN NO. DESIGNATION (NOT MARKED ON PART)12345678.313 (7.95) FLATS.320 (8.13) HEXINTEGRAL RELEASE SLEEVESHIELDRETAINER NUTEl Ochito ® Type II Socket Contact 858-0061.950 (49.53) MAX Ø .316/.313(8.03/7.95)CABLE (REF)HEATSHRINKTUBING.033/.029 (0.84/0.74).060 (1.52)POLARIZATIONKEY PIN NO. DESIGNATION (NOT MARKED ON PART)12345678.320 (8.13) HEXINTEGRAL RELEASE SLEEVE.313 (7.95) FLATSØ .288/.284(7.32/7.21).631/.625 (16.02/15.88)SHIELDRETAINER NUTEl Ochito ® Type I Socket Contact 858-004, 858-017, 858-029, and 858-031.770(19.56)MAX .033/.029(0.84/0.74).631/.625(16.02/15.88)POLARIZATIONKEYØ .288/.284(7.32/7.21)Ø .316/.313(8.03/7.95)Ø .276/.271(7.01/6.88)SHIELD CRIMP FERRULE 858-004, 858-029-01: .231 (5.87) HEX858-017, 858-029-02, 858-031: .265 (6.73) ROUNDCABLE (REF).060 (1.52)PIN NO. DESIGNATION (NOT MARKED ONPART)12345678®Octaxial Contacts6© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • • U.S. CAGE code 06324 • El Ochito ® Octaxial ContactsDimensions in Inches (millimeters) are subject to change without notice.El Ochito ® Pin Contact 858-009 for ARINC 600 Connectors.515/.505(13.08/12.83)POLARIZATIONKEY.90(22.9) MAX.033/.029 (0.84/0.74)Ø .316/.313(8.03/7.95)Ø .219/.217(5.56/5.51)Ø .276/.271(7.01/6.88).075/.073(1.91/1.85)SHIELD CRIMP858-009-01F: .231 (5.87) HEX 858-009-02F: .265 (6.73) ROUNDPIN NO. DESIGNATION (NOT MARKED ONPART)12345678DimensionsEl Ochito ® Socket Contact 858-010 for ARINC 600 ConnectorsØ .276/.271(7.01/6.88)CABLE (REF).90(22.9)MAX .033/.029(0.84/0.74).600/.590 (15.24/15.00)SHIELD CRIMP858-010-01F: .231 (5.87) HEX 858-010-02F: .265 (6.73) ROUNDPOLARIZATIONKEYØ .288/.284(7.32/7.21)Ø .316/.313(8.03/7.95)PIN NO. DESIGNATION (NOT MARKED ONPART)12345678.075/.073(1.91/1.85)El Ochito ® Pin Contact 858-014 for EN4644 EPXB Connectors.760(19.30) MAXØ .276/.273(7.01/6.93).075/.073(1.91/1.85).033/.029 (0.84/0.74).053/.043 (1.35/1.09).515/.505 (13.08/12.83)SHIELD CRIMP .231 (5.87) HEXØ .316/.313(8.03/7.95)Ø .219/.217(5.56/5.51)POLARIZATIONKEYPIN NO. DESIGNATION (NOT MARKED ONPART)CABLE (REF)12345678El Ochito ® Socket Contact 858-015 for EN4644 EPXB ConnectorsØ .276/.273(7.01/6.53)CABLE (REF).620(15.75)MAX .033/.029(0.84/0.74).600/.590 (15.24/15.00).034/.020 (0.86/0.51)SHIELD CRIMP .231 (5.87) HEXPOLARIZATIONKEYØ .288/.284(7.32/7.21)Ø .316/.313(8.03/7.95)PIN NO. DESIGNATION (NOT MARKED ONPART)12345678.075/.073(1.91/1.85)El Ochito ® Socket Contact 858-032 for Series 791 and 792 Connectors.975 (24.77) MAX.289/.279 (7.34/7.09)POLARIZATIONKEYØ .288/.284(7.32/7.21)Ø .316/.313(8.03/7.95)Ø .276/.271(7.01/6.88) SHIELD CRIMP858-032-01: .231 (5.87) HEX 858-032-02: .265 (6.73) ROUNDCABLE (REF).060 (1.52)PIN NO. DESIGNATION (NOT MARKED ONPART)12345678®Octaxial Contacts© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • • U.S. CAGE code 06324 • El Ochito ® Octaxial ContactsDimensions in Inches (millimeters) are subject to change without notice.724 AWG S/UTP Cat 6A CableGlenair Part Number 963-037-24Manufacturer Part Number E6A3824ManufacturerPICS/UTP 24 AWG cable is specially designed for airborne 10 Gigabit Ethernet applications. Twisted pairs are separated by a fluoropolymer spline for reduced crosstalk and attenuation. This 200°C rated cable is Skydrol resistant, RoHS compliant and meets FAA FAR Parts 23 and 25 Appendix F flammability requirements. Laser-markable white PTFE jacket withstands abrasion and chemicals. Meets ANSI/TIA-568-C.2 Category 6A performance up to 246 feet.Construction DetailsCONDUCTOR24 AWG 19X36 SILVER PLATED COPPERFOUR TWISTED PAIRSPFA WIRE INSULATIONPTFE TAPE FLUOROPOLYMER SPLINE SILVER-PLATED COPPER BRAID90% MIN. COVERAGEFOIL SHIELD100% COVERAGEJACKETPTFE WHITE LASER-MARKABLE 0.26 (6.6) NOMINALColor CodePair #1 Blue, White/Blue · Pair #2 Orange, White/Orange · Pair #3 Green, White/Green · Pair #4 Brown, White/BrownSpecificationsImpedance (ohms)100Temperature Rating -55 to +200°CWeight (lbs/100 ft.) 4.6 Capacitance (pF/ft)14.5Minimum Bend Radius (inches).78Velocity of Propagation %70Dielectric Voltage Rating (kV rms) 1.5DC Resistance, Max (ohms/1000 ft.)28.5Max Distance in Feet (m)246 (75)Attenuation Nom / MaxFrequency dB/100 ft.10 MHz2.3 / 2.6100 MHz 7.0 / 8.4250 MHz 11.4/ 13.7500 MHz16.5 / 20.024 AWG S/FTP Cat 6A CableGlenair Part Number 963-033-24Manufacturer Part Number RCN9034-24ManufacturerGoreS/FTP 24 AWG cable has an individual foil shield around each data pair for reduced crosstalk and attenuation. This high data rate Ethernet cable features a unique cable jacket material and high-density construction that significantly reduces weight and diameter. Meets ANSI/TIA 568-C.2 Category 6A requirements up to 80 meters (262 feet). Qualified to SAE AS6070/5-24.Construction DetailsCONDUCTOR24 AWG 19X36 SILVER PLATED COPPER ALLOYWIRE INSULATION ePTFE / PTFE .060 (1.52)OVERALL SHIELDAWG 40 SILVER-PLATED COPPER 92% MIN COVERAGEPAIR SHIELDALUMINIZED POLYAMIDE (ALUMINUM OUT)FILLERFEP/ePTFE .060 (1.52) DIA.JACKETENGINEERED FLUOROPOLYMER EF100WHITE LASER-MARKABLE 0.004 (0.10) WALL 0.260 (6.60) MAX DIAMETERColor CodePair #1 Blue, White/Blue · Pair #2 Orange, White/Orange · Pair #3 Green, White/Green · Pair #4 Brown, White/BrownSpecificationsImpedance (ohms)100 (+10 -5)Temperature Rating -65 to +200°CWeight (lbs/100 ft.) 4.1 Capacitance (pF/ft)12.5Time Delay1.24 ns/ftMaximum Attenuation at 80m LengthFrequency dB 10 MHz 5.9100 MHz 19.1250 MHz 31.1500 MHz 45.3NEXT (minimum)Frequency dB 1 MHz 74.310 MHz 59.2100 MHz 52.3250 MHz 47.9500 MHz 42.224 AWG Category 6A Ethernet Cables 963-037 and 963-033®Octaxial Contacts8© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • • U.S. CAGE code 06324 • El Ochito ® Octaxial ContactsDimensions in Inches (millimeters) are subject to change without notice.26 AWG S/UTP Cat 6A CableGlenair Part Number963-003-26Manufacturer Part Number E6A3826Manufacturer PICS/UTP 26 AWG cable is small, lightweight and flexible. Twisted pairs are separated by a fluoropolymer spline for reduced crosstalk and attenuation. This 200°C rated cable is Skydrol resistant, RoHS compliant and meets FAA FAR Parts 23 and 25 Appendix F flammability requirements. Rugged, laser-markable PTFE jacket withstands abrasion and chemicals. Meets ANSI/TIA-568-C.2 Category 6A performance up to 193 feet.Construction DetailsCONDUCTOR26 AWG 19X38 SILVER PLATED HIGH STRENGTH COPPER ALLOYFOUR TWISTED PAIRSPFA WIRE INSULATIONFLUOROPOLYMER TAPE SPLINEFLUOROPOLYMERSILVER-PLATED COPPER BRAID80% MIN. COVERAGEJACKETPTFE WHITE LASER-MARKABLE 0.22 (5.59)Color CodePair #1 Blue, White/Blue · Pair #2 Orange, White/Orange · Pair #3 Green, White/Green · Pair #4 Brown, White/BrownSpecificationsImpedance (ohms)100Temperature Rating -55 to +200°CWeight (lbs/100 ft.) 3.5 Capacitance (pF/ft)14.5Minimum Bend Radius (inches)0.66Velocity of Propagation %70Dielectric Voltage Rating (kV rms) 1.5DC Resistance, Max (ohms/1000 ft.)44.8Max Distance in Feet (m)193 (59)Attenuation Nom / MaxFrequency dB/100 ft.10 MHz2.7 /3.1100 MHz 8.7 / 10.5250 MHz 14.4 / 17.2500 MHz20.7 / 24.926 AWG S/FTP Cat 6A CableGlenair Part Number963-033-26Manufacturer Part Number RCN9047-26Manufacturer GoreS/FTP 26 AWG cable has an individual foil shield around each data pair for reduced crosstalk and attenuation. This high data rate Ethernet cable features a unique cable jacket material and high-density construction that significantly reduces weight and diameter. Meets ANSI/TIA 568-C.2 Category 6A requirements up to 65 meters (213 feet). Qualified to SAE AS6070/6-6.Construction DetailsCONDUCTOR26 AWG 19X38 SILVER PLATED HIGH STRENGTH COPPER ALLOYWIRE INSULATION ePTFE / PTFE .050 (1.27)OVERALL SHIELDAWG 40 SILVER-PLATED COPPER 92% MIN COVERAGEPAIR SHIELDALUMINIZED POLYAMIDE (ALUMINUM OUT)FILLERePTFEJACKETENGINEERED FLUOROPOLYMER EF100WHITE LASER-MARKABLE 0.004 (0.10) WALL 0.220 (5.59) MAX DIAMETERColor CodePair #1 Blue, White/Blue · Pair #2 Orange, White/Orange · Pair #3 Green, White/Green · Pair #4 Brown, White/BrownSpecificationsImpedance (ohms)100 (+10 -5)Temperature Rating -65 to +200°CWeight (lbs/100 ft.) 3.2 Capacitance (pF/ft)12.5Time Delay1.24 ns/ftMaximum Attenuation at 65m LengthFrequency dB 10 MHz 5.9100 MHz 19.1250 MHz 31.1500 MHz 45.3NEXT (minimum)Frequency dB 1 MHz 74.310 MHz 59.2100 MHz 52.3250 MHz 47.9500 MHz 42.226 AWG Category 6A Ethernet Cables 963-003 and 963-033© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • • U.S. CAGE code 06324 • El Ochito ® Octaxial Contacts Dimensions in Inches (millimeters) are subject to change without notice.926 AWG S/FTP Cat 6A CableGlenair Part Number963-050Manufacturer Part Number RCN8966-26Manufacturer Gore963-050 is similar to 963-033-26 except with two layer wire insulation compatible with insulation displacement Ethernet connectors. An individual foil shield around each data pair provides reduced crosstalk and attenuation. Meets ANSI/TIA 568-C.2 Category 6A requirements up to 65 meters (213 feet).Construction DetailsCONDUCTOR26 AWG 19X38 SILVER PLATED HIGH STRENGTH COPPER ALLOYWIRE INSULATION ePTFE OVER PTFE .050 (1.27) MAX OVERALL SHIELDAWG 40 SILVER-PLATED COPPER 92% MIN COVERAGEPAIR SHIELDALUMINIZED KAPTON (ALUMINUM OUT)FILLERFEP / ePTFEJACKETENGINEERED FLUOROPOLYMER EF100WHITE LASER-MARKABLE 0.003 (0.08) WALL 0.230 (5.84) MAX DIAMETERColor CodePair #1 Blue, White/Blue · Pair #2 Orange, White/Orange · Pair #3 Green, White/Green · Pair #4 Brown, White/BrownSpecificationsImpedance (ohms)100 (+10 -5)Temperature Rating -55 to +200 °CWeight (lbs/100 ft.) 3.5 Operating Voltage150 VrmsMaximum Attenuation at 65mLengthFrequency dB 10 MHz 5.9100 MHz 19.1250 MHz 31.1500 MHz 45.3NEXT (minimum)Frequency dB 1 MHz 74.310 MHz 59.2100 MHz 52.3250 MHz 47.9500 MHz 42.226 AWG Category 6A Ethernet Cable 963-05010© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • • U.S. CAGE code 06324 • El Ochito ® Octaxial ContactsDimensions in Inches (millimeters) are subject to change without notice.SuperSpeed USB CableGlenair Part Number 963-04790 ohm aerospace-grade cable features abrasion-resistant polyurethane jacket and #24 AWG wires for USB power. SuperSpeed data pairs feature low dielectric constant closed cell foam insulation. Each SuperSpeed pair has an aluminized polyester shield.Construction DetailsSUPERSPEED PAIRS90 OHM SHIELDED TWISTEDCONDUCTORS - 26 AWG 19X38 SILVER PLATED COPPERINSULATION - LOW LOSS FOAMED DIELECTRIC INSULATION .041 (1.04)DRAIN - 28 AWG 19X40 SILVER PLATED COPPERSHIELD - AL/POLYESTER,100% COVERAGE, FOIL SIDE INOVERALL SHIELD AWG 40 SILVER-PLATED COPPER 90% MIN COVERAGE POWER PAIRAWG 24 SILVER-PLATED COPPER FEP INSULATION RED/BLACKUTP SIGNAL PAIR90 OHM UNSHIELDED TWISTED 26 AWG 19X38 SILVER PLATEDCOPPER, FEP INSULATION, .037 (0.94)JACKETBLACK POLYURETHANE .237 (6.02)Color CodeSuperSpeed pairs VIO/ORN and BLU/YEL · Power wires RED, BLK · Low speed pair WHT/GRN.SpecificationsImpedance (ohms) High speed pairs Low-speed pair 90 ± 590 ±10Temperature Rating-30 to +105°CVoltage Rating (DWV Vac)300Frequency (GHz)IL (dB/m)NEXT (dB)1.25 1.874.62.5 2.667.75.0 4.053.17.55.753.5High Temperature SuperSpeed USB CableGlenair Part Number 963-110High performance, high temperature cable delivers dependable signal integrity over longer cable lengths. Fluoropolymer jacket can be laser-marked. Low-skew SuperSpeed data pairs have individual braid shields.Construction DetailsSUPERSPEED PAIRS90 OHM SHIELDED TWISTEDCONDUCTORS - 26 AWG 19X38 SILVER PLATED COPPERINSULATION - PTFE OVER ePTFE BINDER - WHITE ePTFEDRAIN - 28 AWG 19X40 SILVER PLATED COPPERSHIELD - 40 AWG SILVER PLATED COPPER BRAIDJACKET - FLUOROPOLYMER, WHITEOUTER SHIELD BINDER - ePTFE UNDER AND OVERAWG 40 SILVER-PLATED COPPER BRAIDPOWER PAIRAWG 24 19/36 SILVER-PLATED COPPER FLUOROPLASTIC INSULATION RED/BLACK TWISTEDUTP SIGNAL PAIR90 OHM UNSHIELDED TWISTED26 AWG 19X38 SILVER PLATED COPPER, FLUOROPLASTIC INSULATIONJACKETFLUOROPOLYMER, NATURAL OVER FLUOROPOLYMER, WHITELASER-MARKABLE .228/.244 (5.8/6.2) DIA.Color CodeSuperSpeed pairs VIO/ORN and BLU/YEL · Power wires RED, BLK · Low speed pair WHT/GRN.SpecificationsImpedance (ohms)90 ± 5Temperature Rating -65 to +200°C Voltage Rating< 50 Vac Dielectric Withstanding Voltage 100 Vac rms Weight57 g/m nominal Attenuation (S0021)Freq. (GHz)dB/m max..625 1.21.25 1.72.5 2.55.0 3.97.5 5.0SuperSpeed USB Cables 963-047 and 963-110© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • • U.S. CAGE code 06324 • El Ochito ® Octaxial ContactsDimensions in Inches (millimeters) are subject to change without notice.NEXT (dB)MHz 0250500ACR-F (dB)MHz 0250500ACR-N (dB)MHz 0250500NEXT (dB)MHz 0204060801000250MHz0250500ACR-F (dB)MHz 0204060801000250ACR-F @ Remote (dB)MHz250500ACR-N (dB)MHz -40040800250ACR-N @ Remote (dB)MHz250500Insertion Loss (dB)MHz 0250500ACR-N @ Remote (dB)MHz250500RL @ Remote (dB)MHz 0250500ACR-N (dB)MHz250500ACR-N @ Remote (dB)MHz250500RL (dB)MHz 1000250500RL @ Remote (dB)MHz 250500* Measurement is within the accuracy limits of the instrument.FLUKE DSX-5000MAINFLUKE DSX-5000REMOTE© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • • U.S. CAGE code 06324 • El Ochito ® Octaxial ContactsDimensions in Inches (millimeters) are subject to change without notice.SuperSpeed Pair 1USB 3.1 Gen 1 Upper Limit USB 3.1 Gen 1 Lower LimitSuperSpeed Pair 240050060070080090010001100120013001400Time (ps)Test BoardPC Tail Mated Contacts Crimp Area Cable0.3m 1.5m 1.8m USB 3.1 Gen 1 Limit2468Frequency (GHz)NEXT (SuperSpeed Pairs)El Ochito Blue Cable Assembly0-100-20-30-40-50-60-70-800.3m SS10.3m SS21.5m SS11.5m SS21.8m SS11.8m SS2USB 3.1 Gen 1 Limit2468Frequency (GHz)2 mated contacts}2 mated contacts}3 mated contacts }2468Frequency (GHz)NEXT (SuperSpeed to D+/D-)El Ochito ® Blue Cable Assembly0-100-20-30-40-50-60-70-80S (d B )0.3m 1.5m 1.8m USB 3.1 Gen 1 Limit2468Frequency (GHz)FEXT (SuperSpeed to D+/D-)El Ochito ® Blue Cable Assembly0-100-20-30-40-50-60-70-800.3m 1.5m 1.8m USB 3.1 Gen 1 Limit2468Frequency (GHz)Mode Conversion (SCD21)El Ochito ® Blue Cable Assembly-10-20-30-40-50-60-70-80B )0.3m SS10.3m SS21.5m SS11.5m SS2USB 3.1 Gen 1 Limit 1.8m SS11.8m SS2El Ochito® Blue for SuperSpeed USB, pin contact mating faceContact PositionsEl Ochito® Blue for SuperSpeed USB, pin contact mating faceContact Positions®Octaxial ContactsEl Ochito ® Blue-to-SuperSpeed USB Cable Assemblies 8572-0003Wiring Diagram 8572-0003-01El Ochito ® Pin to USB 3.0 A PlugWiring Diagram 8572-0003-04El Ochito ® Socket toUSB 3.0 Micro-B PlugWiring Diagram 8572-0003-02El Ochito ® Socket to USB 3.0 A RecepWiring Diagram 8572-0003-03El Ochito ® Socket to USB 3.0 B Plug8572-0003-01-(XX)OCHITO PIN CONTACT USB 3.0TYPE A PLUG876544321WHT GRN YEL BLU BLK REDVIO DRAIN WIRESORNGND23951768VBUS D-D+GND RX-RX+GND TX-TX+8572-0003-02-(XX)OCHITO SOCKET CONTACT USB 3.0TYPE A RECEP876544321WHT GRN YEL BLU BLK REDVIO DRAIN WIRESORNGND23951768VBUS D-D+GND RX-RX+GND TX-TX+8572-0003-03-(XX)OCHITO SOCKET CONTACT USB 3.0TYPE B PLUG876544321WHT GRN YEL BLU BLK REDVIO DRAIN WIRESORNGND23951768VBUS D-D+GND RX-RX+GND TX-TX+8572-0003-04-(XX)OCHITO SOCKET CONTACT USB 3.0MICRO-B PLUG876545321WHT GRN YEL BLU BLK REDVIO DRAIN WIRESORNGND231061879VBUS D-D+GND RX-RX+GND TX-TX+Plug Adapter Receptacle Adapter®Octaxial ContactsOverall Length Part Number Inches meters 180.45858-020-A-02-18360.91858-020-A-02-3672 1.82858-020-A-02-72120 3.05858-020-A-02-120859-117P Pin AdapterShell SizeA Diameter 1.200 (30.5) MAXØ AHBCDFEGAAGFEDCB HIn.mm.09 (A).65016.511 (B).78019.817 (E) 1.20330.619 (F) 1.26532.121 (G) 1.39035.323 (H) 1.52038.625 (J)1.63541.5859-132P Pin AdapterShell SizeA Diameter 1.200 (30.5) MAX Ø AAG FEDC B HIn.mm.09 (A).71018.011 (B).85021.617 (E) 1.27132.319 (F) 1.33333.921 (G) 1.46037.123 (H) 1.58540.325 (J)1.71143.5859-118S Socket AdapterShell SizeA Diameter 1.200 (30.5) MAXØ AH B D FEG AIn.mm.09 (A).71018.011 (B).85021.617 (E) 1.27132.319 (F) 1.33333.921 (G) 1.46037.123 (H) 1.58540.325 (J)1.71143.5859-133S Socket AdapterShell SizeA Diameter 1.200 (30.5) MAXØ AHBC DFEGAAHGFEDCBIn.mm.09 (A).65016.511 (B).78019.817 (E) 1.20330.619 (F) 1.26532.121 (G) 1.39035.323 (H) 1.52038.625 (J)1.63541.5Overall Length Part Number Inches meters 180.45858-020-B-02-18360.91858-020-B-02-3672 1.82858-020-B-02-72120 3.05858-020-B-02-120El Ochito ® Test Jumpers with Pin ContactsOCHITO PIN CONTACT (858-018)ETHERNET CABLE S/FTP CAT6A, 26 AWG(963-033-26)RJ45 MODULAR PLUGSHIELDED HIGH PERFORMANCECAT6A 10 GIGABIT SPEEDPin Jumper Ordering InformationEl Ochito® Test Jumper SchematicNotes1.858-020 jumper cables are intended only for use in Glenair El Ochito® test adapters. Do not attempt to install in MIL-DTL-38999 type connectors.2. Other cable lengths are readily available. Change the suffix number to the desired length in inches.3. 858-020 jumper cables are fully assembled and 100% electrically tested.4. Length is minimum overall length including contact and plug.5. No tool is required to install or remove contacts.6.Jumper cables are wired per the guidelines of ARINC 664 Part 2 Appendix N.El Ochito ® Test Jumpers with Socket ContactsOCHITO SOCKETCONTACT (858-019)RJ45 MODULAR PLUGSHIELDED HIGH PERFORMANCECAT6A 10 GIGABIT SPEEDETHERNET CABLE S/FTP CAT6A, 26 AWG(963-033-26)Socket Jumper Ordering InformationMATING FACE OF SOCKETCONTACT1234567816782345MATING FACE OF PINCONTACT8763214587654321BRNWHT/BRN BLUE WHT/BLU ORN WHT/ORN GRN WHT/GRN OCHITO PIN OR SOCKETRJ-45El Ochito ® Test Adapters and Jumpers for SuperNine ® ConnectorsInner Contacts (8)Ferrule BushingInner and Outer InsulatorsOuter BodyMounting BlockQ Q QQQ Q QQ Q Q Q QQQQQQQQQQQADDITIONAL RUGGEDIZEDHIGH-SPEED DATALINK SOLUTIONSavailable now from GlenairSUPERSEAL™ IP67 OPEN-FACE RUGGEDIZED FIELD RJ45 SOLUTIONSSUPERSEAL™ IP67 OPEN-FACE RUGGEDIZED FIELD USB 2.0 AND 3.0 SOLUTIONSSeries ITS 5015 type SuperSeal™ RJ45MIL-DTL-28840 type SuperSeal™ RJ45MIL-DTL-38999 Sr. III type SuperSeal™ RJ45Series IPT 26482 typeSuperSeal™ RJ45Series 80 Mighty MouseSuperSeal™ RJ45Series 80 Mighty MouseSuperSeal™ USB Series IPT 26482 typeSuperSeal™ USB MIL-DTL-38999 Sr. III type SuperSeal™ USB MIL-DTL-28840 type SuperSeal™ USBSeries ITS 5015 type SuperSeal™ USBOCTOBYTE™ SERIES RUGGEDIZED ETHERNET CONNECTOR SPEED-MASTER™ 10G+ ETHERNETEthernet Cat7A contacts Ethernet Cat5 contacts Coax contacts Ethernet MVB - WBT contactsSpeed-Master™ modular 10G+ Ethernet technology (shown here in SuperNine®packaging) available now for22D gage contacts and wiresTested for compliance according to EN50173-1 standards for CAT5E and CAT7HIGH-SPEED / RF DATALINK CONTACTSSize #8 differential twinax contactsSize #12 ultra-twinax differential twinaxcontactsSize #8 quadrax contacts Size #12 SMPM type spring-loaded coaxialSize #8 spring-loaded BMB microwave contacts GLENAIR FIBER OPTIC INTERCONNECT SOLUTIONSMIL-DTL-38999 type fiber optic Glenair Front Release (GFR)fiber opticNGCON MIL-PRF-64266fiber optics Eye-Beam™ GLT and GMAexpanded beamMT Ferrule 38999 typefiber optic ARINC 801 type fiber opticGlenair High Density (GHD) fiber optic29© 2018 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • • U.S. CAGE code 06324 • High-Speed ContactsLaboratory link test and qualification data for harsh-environment Photonic solutions areavailable—just contact the factorySignal aggregation media converter(cutaway view)7-port Ethernet switchSmall form-factor bi-directionalPCB-mount transceivers Lightning-strike protected ARINC 801 F/O to D38999-type media converter Micro-aggregatorD38999 type fiber optic Ethernet media converter DVI copper-to-fiber media converterPCB-mount dual Transmitters, Receivers, and Transceivers RF-over-fiber for SATCOM-based WiFiand IFE systemsAEROSPACE-GRADE TRANSCEIVERS, RECEIVERS, AND MEDIA CONVERTERSSERIES 050 OVERVIEWRuggedized, Small Form-Factor Photonic Interconnect SolutionsEvaluation boards and performance testing available for all systemsGlenair, Inc.1211 Air Way • Glendale, California • 91201-2497Telephone:818-247-6000•Fax:818-500-9912•*****************Telephone:+44-1623-638100Facsimile:+44-1623-638111****************.uk Glenair UK Ltd40 Lower Oakham Way Oakham Business Park Mansfield, Notts NG18 5BY England Telephone:06172 / 68 16 0Facsimile:06172 / 68 16 90***************Glenair GmbH Schaberweg 2861348 Bad Homburg GermanyTelephone:+33-5-34-40-97-40Facsimile:+33-5-61-47-86-10****************Glenair France SARL 7, Avenue Parmentier Immeuble Central Parc #231200 Toulouse FranceTelephone:847-679-8833Facsimile:847-679-8849Glenair Microway Systems 7000 North Lawndale Avenue Lincolnwood, IL 60712Telephone:+46-8-50550000****************Glenair Nordic ABGustav III : S Boulevard 46SE-169 27 Solna Sweden© 2018 Glenair, Inc. Printed in U.S.A.CAT-159Telephone:+34-925-89-29-88Facsimile:+34-925-89-29-87****************Glenair Iberica C/ La Vega, 1645612 Velada SpainTelephone:203-741-1115Facsimile:203-741-0053*****************Glenair Power Products Group 20 Sterling Drive Wallingford, CT 06492Telephone: +39-051-782811Facsimile:+39-051-782259***************Telephone:+82-31-8068-1090Facsimile:+82-31-8068-1092****************Glenair Italia S.p.A.Via Del Lavoro, 740057 Quarto Inferiore – Granarolo dell’Emilia Bologna, ItalyGlenair KoreaB-1304 Gunpo IT Valley 148 Gosan-Ro, Gunpo-Si Kyunggi-Do, Korea 435-733INTERCONNECT SOLUTIONSMISSION-CRITICAL。

AD芯片-----TECHWELL TW6805A仿真软件里的AD0809有问题,用0808代替定时/计数器的使用方法：CLK：计数和测频状态时，数字波的输入端。

（counter enable)CE：计数使能端；通过属性设置高还是低有效。

无效暂停计数RST:复位端（RESET),可设上升沿（Low-High)或者下降沿（High-Low）有效。

4种工作方式：通过属性Operating Mode 来选择。

Default : 缺省方式，计数器方式。

Time(secs):100S定时方式，由CE和RST控制暂停和重新开始。

Time(hms)：10小时定时方式，同上。

Frequency: 测频方式，CE和RST有效时，显示CLK端数字波频率Count:计数方式。

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 常用元件列表：POT-HG 可调电位器7SEG-MPX8-CC-BLUE 8位数码管COMPIM 串口SW- 开关7SEG-BCD 含译码驱动的数显Speaker 扬声器2N5771和2N5772，15V对管300MARES , CAP,BUTTON 按钮开关KEYPAD-PHONE 3*4电话键盘KEYPAD-SMALLCALC 4*4计算器键盘KEYPAD-CALCULATOR 4*6计算器键盘PG160128A 128*128液晶++++++++元件库详细分类1.analog ics 模拟集成器件8个子类：amplifier 放大器comparators 比较器display drivers 显示驱动器filters 滤波器miscellaneous 混杂器件regulators 三端稳压器timers 555定时器voltage references 参考电压2，capacitors CAP电容，23个分类别animated 可显示充放电电荷电容audio grade axial 音响专用电容axial lead polypropene 径向轴引线聚丙烯电容axial lead polystyrene 径向轴引线聚苯乙烯电容ceramic disc 陶瓷圆片电容decoupling disc 解耦圆片电容high temp radial 高温径向电容high temp axial electrolytic高温径向电解电容metallised polyester film 金属聚酯膜电容metallised polypropene 金属聚丙烯电容metallised polypropene film 金属聚丙烯膜电容miniture electrolytic 微型电解电容multilayer metallised polyester film 多层金属聚酯膜电容mylar film 聚酯薄膜电容nickel barrier 镍栅电容non polarised 无极性电容polyester layer 聚酯层电容radial electrolytic 径向电解电容resin dipped 树脂蚀刻电容tantalum bead 钽珠电容variable 可变电容vx a xial electrolytic VX 轴电解电容3，CMOS 4000 series 4000系列数字电路adders 加法器buffers & drivers 缓冲和驱动器comparators 比较器counters 计数器decoders 译码器encoders 编码器flip-flops & latches 触发器和锁存器frequency dividers & tiner 分频和定时器gates & inverters 门电路和反相器memory 存储器misc.logic 混杂逻辑电路mutiplexers 数据选择器multivibrators 多谐振荡器phase-locked loops(PLL) 锁相环registers 寄存器signal switcher 信号开关4，connectors 接头；8个分类：audio 音频接头D-type D型接头DIL 双排插座header blocks 插头miscellaneous 各种接头PCB transfer PCB 传输接头SIL 单盘插座ribbon cable 蛇皮电缆terminal blocks 接线端子台5，data converters 数据转换器：4个分类：A/D converters 模数转换器D/A converters 数模转换器sample & hold 采样保持器temperature sensors 温度传感器6，debugging tools 调试工具数据：3个类别：breakpoint triggers 断点触发器logic probes 逻辑输出探针logic timuli 逻辑状态输入7，diodes 二极管；8个分类：bridge rectifiers 整流桥generic 普通二极管rectifiers 整流二极管schottky 肖特基二极管switching 开关二极管tunnel 隧道二极管varicap 稳压二极管8，inductors 电感：3个类别：generic 普通电感SMT inductors 表面安装技术电感transformers 变压器9,laplace primitives 拉普拉斯模型：7个类别：1st order 一阶模型2nd order 二阶模型controllers 控制器non-linear 非线性模型operators 算子poles/zeros 极点/零点symbols 符号10，memory ICs 存储器芯片：7个分类：dynamic RAM 动态数据存储器EEPROM 电可擦出程序存储器EPROM 可擦出程序存储器I2C memories I2C总线存储器memory cards 存储卡SPI Memories SPI总线存储器static RAM 静态数据存储器11，microprocessor ICs 微处理器：13个分类：12，modelling primitivvves 建模源：9个分类：13，operational amplifiers 运算放大器：7个分类：dual 双运放ideal 理想运放macromodel 大量使用的运放octal 8运放quad 4运放single 单运放triple 三运放14，optoelectronics 光电器件：11个分类：7-segment displays 7段显示alphanumeric LCDs 液晶数码显示bargraph displays 条形显示dot matrix displays 点阵显示graphical LCDs 液晶图形显示lamps 灯LCD controllers 液晶控制器LCD controllers 液晶面板显示LEDs 发光二极管optocouplers 光电耦合serial LCDs 串行液晶显示15，resistors 电阻：11个分类：0.6w metal film 0.6w金属膜电阻10 watt wirewound 10w绕线电阻2w metal film 2w 金属膜电阻3 watt wirewound 3w 绕线电阻7 watt wirewound 7w 绕线电阻generix 普通电阻high voltage 高压电阻NTC 负温度系数热敏电阻resistor packs 排阻variable 滑动变阻器varisitors 可变电阻参考试验中采用的可变电阻是：POT-HG16，simulator primitives 仿真源：3个类别：flip-flops 触发器gates 门电路sources 电源17，switches and relays 开关和继电器：4个类别：key pads 键盘relays 普通继电器relays(specific) 专用继电器switches 开关18,switching devices 开关器件：4个分类：DIACs 两端交流开关generic 普通开关元件SCRs 可控硅TRIACs 三端双向可控硅19，真空管：20，传感器：2个分类：pressure 压力传感器temperature 温度传感器21，晶体管：8个分类：bipolar 双极型晶体管generic 普通晶体管(错误）IGBT 绝缘栅双极晶体管JFET 结型场效应管MOSFET 金属氧化物场效应管RF power LDMOS 射频功率LDMOS管RF power VDMOS 射频功率VDMOS管unijunction 单结晶体管Electromechanical 电机MOTOR AC 交流电机MOTOR SERVO 伺服电机双相步进电机motor-bistepper（Bipolar Stepper Motor），四相步进电机motor-stepper（unipolar stepper motor）驱动电路，用ULN2003可以，proteus中推荐的L298和L6201(电子元件-步进电机中有L298资料）+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 步进电机,可以用MTD2003,UN2916等专用芯片Proteus中图形液晶模块驱动芯片一览表LM3228 LM3229 LM3267 LM3283LM3287 LM4228 LM4265 LM4267LM4283 LM4287 PG12864F PG24064FPG128128A PG160128AAGM1232G EW12A03GL Y HDM32GS12-B HDM32GS12Y-BHDG12864F-1 HDS12864F-3 HDG12864L-4 HDG12864L-6NOKIA7110 TG126410GFSB TG13650FEYAMPIRE128x64 LGM12641BS1RPROTEUS原理图元器件库详细说明Device.lib 单双向可控硅、包括电阻、电容、二极管、三极管和PCB的连接器符号、ACTIVE.LIB 包括虚拟仪器和有源器件、拨动开关、键盘、可调电位器和开关、DIODE.LIB 包括二极管和整流桥、稳压管、变容二极管、大功率二极管、高速二极管、可控硅、DISPLAY.LIB 包括LCD、LED、LED阵列BIPOLAR.LIB 包括三极管FET.LIB 包括场效应管ASIMMDLS.LIB 包括模拟元器件AS 稳压二极管、全桥、74系列、及其他。

LM78M12中⽂资料LM341/LM78MXX Series3-Terminal Positive Voltage RegulatorsGeneral DescriptionThe LM341and LM78MXX series of three-terminal positive voltage regulators employ built-in current limiting,thermal shutdown,and safe-operating area protection which makes them virtually immune to damage from output overloads.With adequate heatsinking,they can deliver in excess of 0.5A output current.Typical applications would include local (on-card)regulators which can eliminate the noise and de-graded performance associated with single-point regulation.Featuresn Output current in excess of 0.5A n No external componentsn Internal thermal overload protection n Internal short circuit current-limitingn Output transistor safe-area compensationnAvailable in TO-220,TO-39,and TO-252D-PAK packagesn Output voltages of 5V,12V,and 15VConnection DiagramsTO-39Metal Can Package (H)DS010484-5Bottom ViewOrder Number LM78M05CH,LM78M12CH or LM78M15CHSee NS Package Number H03ATO-220Power Package (T)DS010484-6Top ViewOrder Number LM341T-5.0,LM341T-12,LM341T-15,LM78M05CT,LM78M12CT or LM78M15CTSee NS Package Number T03BTO-252DS010484-19Top ViewOrder Number LM78M05CDT See NS Package Number TD03BJuly 1999LM341/LM78MXX Series 3-Terminal Positive Voltage Regulators1999National Semiconductor Corporation /doc/96ef4d46852458fb770b5641.htmlAbsolute Maximum Ratings(Note1)If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications.Lead Temperature(Soldering,10seconds)TO-39Package(H)300?C TO-220Package(T)260?C Storage Temperature Range?65?C to+150?C Operating Junction TemperatureRange?40?C to+125?C Power Dissipation(Note2)Internally Limited Input Voltage5V≤V O≤15V35V ESD Susceptibility TBDElectrical CharacteristicsLimits in standard typeface are for T J=25?C,and limits in boldface type apply over the?40?C to+125?C operating temperature range.Limits are guaranteed by production testing or correlation techniques using standard Statistical Quality Control(SQC) methods.LM341-5.0,LM78M05CUnless otherwise specified:V IN=10V,C IN=0.33µF,C O=0.1µFSymbol Parameter Conditions Min Typ Max Units V O Output Voltage I L=500mA 4.8 5.0 5.2V5mA≤I L≤500mA 4.75 5.0 5.25P D≤7.5W,7.5V≤V IN≤20VV R LINE Line Regulation7.2V≤V IN≤25V I L=100mA50mVI L=500mA100V R LOAD Load Regulation5mA≤I L≤500mA100I Q Quiescent Current I L=500mA410.0mA ?I Q Quiescent Current Change5mA≤I L≤500mA0.57.5V≤V IN≤25V,I L=500mA 1.0V n Output Noise Voltage f=10Hz to100kHz40µVElectrical CharacteristicsLimits in standard typeface are for T J=25?C,and limits in boldface type apply over the?40?C to+125?C operating temperature range.Limits are guaranteed by production testing or correlation techniques using standard Statistical Quality Control(SQC) methods.(Continued)LM341-12,LM78M12CUnless otherwise specified:V IN=19V,C IN=0.33µF,C O=0.1µFSymbol Parameter Conditions Min Typ Max UnitsV O Output Voltage I L=500mA11.51212.5V5mA≤I L≤500mA11.41212.6P D≤7.5W,14.8V≤V IN≤27VV R LINE Line Regulation14.5V≤V IN≤30V I L=100mA120mVI L=500mA240V R LOAD Load Regulation5mA≤I L≤500mA240I Q Quiescent Current I L=500mA410.0mAI Q Quiescent Current Change5mA≤I L≤500mA0.514.8V≤V IN≤30V,I L=500mA 1.0V n Output Noise Voltage f=10Hz to100kHz75µVRipple Rejection f=120Hz,I L=500mA69dBV IN Input Voltage Required I L=500mA17.6V to Maintain Line RegulationV O Long Term Stability I L=500mA60mV/khrs Note1:Absolute maximum ratings indicate limits beyond which damage to the component may occur.Electrical specifications do not apply when operating the de-vice outside of its rated operating conditions.Note2:The typical thermal resistance of the three package types is:T(TO-220)package:θ(JA)=60?C/W,θ(JC)=5?C/WH(TO-39)package:θ(JA)=120?C/W,θ(JC)=18?C/WDT(TO-252)package:θ(JA)=92?C/W,θ(JC)=10?C/W3/doc/96ef4d46852458fb770b5641.htmlSchematic DiagramDS010484-1 /doc/96ef4d46852458fb770b5641.html 4 Typical Performance CharacteristicsPeak Output CurrentDS010484-10Ripple RejectionDS010484-11Ripple RejectionDS010484-12Dropout VoltageDS010484-13Output Voltage(Normalizedto1V at T J=25?C)DS010484-14Quiescent CurrentDS010484-15/doc/96ef4d46852458fb770b5641.html 5Typical Performance Characteristics(Continued)Design ConsiderationsThe LM78MXX/LM341XX fixed voltage regulator series has built-in thermal overload protection which prevents the de-vice from being damaged due to excessive junction tem-perature.The regulators also contain internal short-circuit protection which limits the maximum output current,and safe-area pro-tection for the pass transistor which reduces the short-circuit current as the voltage across the pass transistor is in-creased.Although the internal power dissipation is automatically lim-ited,the maximum junction temperature of the device must be kept below +125?C in order to meet data sheet specifica-tions.An adequate heatsink should be provided to assure this limit is not exceeded under worst-case operating condi-tions (maximum input voltage and load current)if reliable performance is to be obtained).1.0Heatsink ConsiderationsWhen an integrated circuit operates with appreciable cur-rent,its junction temperature is elevated.It is important to quantify its thermal limits in order to achieve acceptable per-formance and reliability.This limit is determined by summing the individual parts consisting of a series of temperature rises from the semiconductor junction to the operating envi-ronment.A one-dimension steady-state model of conduction heat transfer is demonstrated in The heat generated at thedevice junction flows through the die to the die attach pad,through the lead frame to the surrounding case material,to the printed circuit board,and eventually to the ambient envi-ronment.Below is a list of variables that may affect the ther-mal resistance and in turn the need for a heatsink.R θJC (Component Variables)R θCA (Application Variables)Leadframe Size &Material Mounting Pad Size,Material,&LocationNo.of Conduction Pins Placement of Mounting Pad Die SizePCB Size &Material Die Attach MaterialTraces Length &WidthMolding Compound Size and MaterialAdjacent Heat Sources Volume of Air Air FlowAmbient Temperature Shape of Mounting PadQuiescent CurrentDS010484-16Output ImpedanceDS010484-17Line Transient Response DS010484-7Load Transient ResponseDS010484-8/doc/96ef4d46852458fb770b5641.html6Design Considerations(Continued)The LM78MXX/LM341XX regulators have internal thermal shutdown to protect the device from over-heating.Under all possible operating conditions,the junction temperature of the LM78MXX/LM341XX must be within the range of 0?C to 125?C.A heatsink may be required depending on the maxi-mum power dissipation and maximum ambient temperature of the application.To determine if a heatsink is needed,the power dissipated by the regulator,P D ,must be calculated:I IN =I L +I GP D =(V IN ?V OUT )I L +V IN I Gshows the voltages and currents which are present in the circuit.The next parameter which must be calculated is the maxi-mum allowable temperature rise,T R (max):θJA =TR (max)/P D If the maximum allowable value for θJA ?C/w is found to be ≥60?C/W for TO-220package or ≥92?C/W for TO-252pack-age,no heatsink is needed since the package alone will dis-sipate enough heat to satisfy these requirements.If the cal-culated value for θJA fall below these limits,a heatsink is required.As a design aid,Table 1shows the value of the θJA of TO-252for different heatsink area.The copper patterns that we used to measure these θJA are shown at the end of the Application Note Section.reflects the same test results as what are in the Table 1shows the maximum allowable power dissipation vs.ambi-ent temperature for theTO-252device.shows the maximum allowable power dissipation vs.copper area (in 2)for the TO-252device.Please see AN1028for power enhancement techniques to be used with TO-252package.TABLE 1.θJA Different Heatsink AreaLayoutCopper AreaThermal Resistance Top Sice (in 2)*Bottom Side (in 2)(θJA ,?C/W)TO-25210.0123010320.06608730.306040.5305450.7605261047700.284800.470900.6631000.857110157120.0660.06689130.1750.17572140.2840.28461150.3920.39255160.50.553*Tab of device attached to topside copperDS010484-23FIGURE 1.Cross-sectional view of Integrated Circuit Mounted on a printed circuit board.Note that the case temperature is measured at the point where the leadscontact with the mounting pad surface DS010484-24FIGURE 2.Power Dissipation Diagram/doc/96ef4d46852458fb770b5641.html 7Design Considerations(Continued)Typical ApplicationDS010484-20FIGURE 3.θJA vs.2oz Copper Area for TO-252DS010484-22FIGURE 4.Maximum Allowable Power Dissipation vs.Ambient Temperature for TO-252DS010484-21FIGURE 5.Maximum Allowable Power Dissipation vs.2oz.Copper Area for TO-252DS010484-9*Required if regulator input is more than 4inches from input filter capacitor (or if no input filter capacitor is used).**Optional for improved transient response./doc/96ef4d46852458fb770b5641.html 8 Physical Dimensions inches(millimeters)unless otherwise notedTO-39Metal Can Package(H)Order Number LM78M05CH,LM78M12CH or LM78M15CHNS Package Number H03A9/doc/96ef4d46852458fb770b5641.htmlPhysical Dimensions inches(millimeters)unless otherwise noted(Continued)TO-220Power Package(T)Order Number LM341T-5.0,LM341T-12,LM341T-15,LM78M05CT,LM78M12CT or LM78M15CT NS Package Number T03B/doc/96ef4d46852458fb770b5641.html 10Physical Dimensionsinches (millimeters)unless otherwise noted (Continued)LIFE SUPPORT POLICYNATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION.As used herein:1.Life support devices or systems are devices or systems which,(a)are intended for surgical implant into the body,or (b)support or sustain life,and whose failure to perform when properly used in accordance with instructions for use provided in the labeling,can be reasonably expected to result in a significant injury to the user.2.A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system,or to affect its safety or effectiveness.National Semiconductor Corporation AmericasTel:1-800-272-9959Fax:1-800-737-7018Email:support@/doc/96ef4d46852458fb770b5641.htmlNational Semiconductor EuropeFax:+49(0)180-5308586Email:europe.support@/doc/96ef4d46852458fb770b5641.htmlDeutsch Tel:+49(0)180-5308585English Tel:+49(0)180-5327832Fran?ais Tel:+49(0)180-5329358Italiano Tel:+49(0)180-5341680National Semiconductor Asia Pacific Customer Response Group Tel:65-2544466Fax:65-2504466Email:sea.support@/doc/96ef4d46852458fb770b5641.htmlNational Semiconductor Japan Ltd.Tel:81-3-5639-7560Fax:81-3-5639-7507/doc/96ef4d46852458fb770b5641.htmlTO-252Order Number LM78M05CDT NS Package Number TD03BLM341/LM78MXX Series 3-Terminal Positive Voltage RegulatorsNational does not assume any responsibility for use of any circuitry described,no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry andspecifications.。