VIA_WLAN Roadmap_Sep'10_Customers(11N)
- 格式:pdf
- 大小:810.25 KB
- 文档页数:8


AWK-3131A SeriesIndustrial IEEE802.11a/b/g/n wireless AP/bridge/clientFeatures and Benefits•IEEE802.11a/b/g/n AP/bridge/client support•Easy setup and deployment with AeroMag•Client-based millisecond-level Turbo Roaming•Complete redundancy with AeroLink Protection•Integrated antenna and power isolation•-40to75°C operating temperature range(-T models)•5GHz DFS channel supportCertificationsIntroductionThe AWK-3131A3-in-1industrial wireless AP/bridge/client meets the growing need for faster data transmission speeds by supporting IEEE 802.11n technology with a net data rate of up to300Mbps.The AWK-3131A is compliant with industrial standards and approvals covering operating temperature,power input voltage,surge,ESD,and vibration.The two redundant DC power inputs increase the reliability of the power supply,and the AWK-3131A can be powered via PoE to make deployment easier.The AWK-3131A can operate on either the2.4or5GHz bands and is backwards-compatible with existing802.11a/b/g deployments to future-proof your wireless investments.Advanced802.11n Industrial Wireless Solution•802.11a/b/g/n compliant AP/bridge/client for flexible deployment•Software optimized for long-distance wireless communication with up to1km line of sight and external high-gain antenna(available only on5 GHz)•Supports60clients connected concurrently•DFS channel support allows a wider range of5GHz channel selection to avoid interference from existing wireless infrastructure Advanced Wireless Technology•AeroMag supports error-free setup of your industrial applications’fundamental WLAN settings•Seamless roaming with client-based Turbo Roaming for<150ms roaming recovery time between APs(Client Mode)•Supports AeroLink Protection for creating a redundant wireless link(<300ms recovery time)between APs and their clientsIndustrial Ruggedness•Integrated antenna and power isolation designed to provide500V insulation protection against external electrical interference•Hazardous location wireless communication with Class I Div.II and ATEX Zone2certifications•-40to75°C wide operating temperature models(-T)provided for smooth wireless communication in harsh environmentsSpecificationsWLAN InterfaceWLAN Standards802.11a/b/g/n802.11i Wireless SecurityModulation Type DSSSMIMO-OFDMOFDMFrequency Band for US(20MHz operating channels) 2.412to2.462GHz(11channels)5.180to5.240GHz(4channels)5.260to5.320GHz(4channels)15.500to5.700GHz(11channels)15.745to5.825GHz(5channels)Frequency Band for EU(20MHz operating channels) 2.412to2.472GHz(13channels)5.180to5.240GHz(4channels)5.260to5.320GHz(4channels)25.500to5.700GHz(11channels)2Frequency Band for JP(20MHz operating channels) 2.412to2.484GHz(14channels)5.180to5.240GHz(4channels)5.260to5.320GHz(4channels)25.500to5.700GHz(11channels)2Wireless Security WEP encryption(64-bit and128-bit)WPA/WPA2-Enterprise(IEEE802.1X/RADIUS,TKIP,AES)WPA/WPA2-PersonalTransmission Rate802.11b:1to11Mbps802.11a/g:6to54Mbps802.11n:6.5to300MbpsTransmitter Power for802.11a23±1.5dBm@6to24Mbps21±1.5dBm@36Mbps20±1.5dBm@48Mbps18±1.5dBm@54MbpsTransmitter Power for802.11b26±1.5dBm@1Mbps26±1.5dBm@2Mbps26±1.5dBm@5.5Mbps25±1.5dBm@11MbpsTransmitter Power for802.11g23±1.5dBm@6to24Mbps21±1.5dBm@36Mbps19±1.5dBm@48Mbps18±1.5dBm@54MbpsTransmitter Power for802.11n(2.4GHz)23±1.5dBm@MCS0/820MHz18±1.5dBm@MCS7/1520MHz23±1.5dBm@MCS0/840MHz17±1.5dBm@MCS7/1540MHzTransmitter Power for802.11n(5GHz)23±1.5dBm@MCS0/820MHz18±1.5dBm@MCS7/1520MHz23±1.5dBm@MCS0/840MHz17±1.5dBm@MCS7/1540MHzTransmitter Power2.4GHz26dBm18dBm18dBm5GHz(UNII-1)23dBm21dBm21dBm5GHz(UNII-2)23dBm21dBm21dBm5GHz(UNII-2e)23dBm23dBm23dBm5GHz(UNII-3)23dBm––Note:Based on regional regulations,the maximum transmission power allowed onthe UNII bands is restricted in the firmware,as indicated above.Receiver Sensitivity for802.11a-90dBm@6Mbps-88dBm@9Mbps-88dBm@12Mbps-85dBm@18Mbps-81dBm@24Mbps-78dBm@36Mbps-74dBm@48Mbps-72dBm@54MbpsReceiver Sensitivity for802.11b-93dBm@1Mbps-93dBm@2Mbps-93dBm@5.5Mbps-88dBm@11MbpsReceiver Sensitivity for802.11g-88dBm@6Mbps-86dBm@9Mbps-85dBm@12Mbps-85dBm@18Mbps-85dBm@24Mbps-82dBm@36Mbps-78dBm@48Mbps-74dBm@54MbpsReceiver Sensitivity for802.11n(2.4GHz)-70dBm@MCS720MHz-69dBm@MCS1520MHz-67dBm@MCS740MHz-67dBm@MCS1540MHzReceiver Sensitivity for802.11n(5GHz)-69dBm@MCS720MHz-71dBm@MCS1520MHz-63dBm@MCS740MHz-68dBm@MCS1540MHzWLAN Operation Mode Access point,Client,Client-Router,Master,Slave,SnifferAntenna External,2/2dBi,Omni-directionalAntenna Connectors2RP-SMA femaleEthernet InterfacePoE Ports(10/100/1000BaseT(X),RJ45connector)1Standards IEEE802.1D-2004for Spanning Tree ProtocolIEEE802.1Q for VLAN TaggingIEEE802.1w for Rapid Spanning Tree ProtocolIEEE802.1X for authenticationIEEE802.3for10BaseTIEEE802.3ab for1000BaseT(X)IEEE802.3af for PoEIEEE802.3u for100BaseT(X)Ethernet Software FeaturesManagement DHCP Server/Client,DNS,HTTP,IPv4,LLDP,Proxy ARP,SMTP,SNMPv1/v2c/v3,Syslog,TCP/IP,Telnet,UDP,Wireless Search Utility,VLAN,MXview,MXconfig Redundancy Protocols RSTP,STPSecurity HTTPS/SSL,RADIUS,SSHTime Management SNTP ClientUnicast Routing Static RouteFirewallFilter ICMP,MAC address,IP protocol,Port-basedSerial InterfaceConsole Port RS-232,8-pin RJ45LED InterfaceLED Indicators PWR1,PWR2,PoE,FAULT,STATE,SIGNAL,WLAN,LANInput/Output InterfaceDigital Inputs2Max.input current:8mA+13to+30V for state1+3to-30V for state0Alarm Contact Channels Relay output with current carrying capacity of1A@24VDCButtons Reset buttonPhysical CharacteristicsHousing MetalIP Rating IP30Dimensions52.7x135x105mm(2.08x5.32x4.13in)Weight860g(1.9lb)Installation DIN-rail mounting,Wall mounting(with optional kit)Power ParametersInput Current0.6A@12VDC,0.15A@48VDCInput Voltage12to48VDC,Redundant dual inputs,48VDC Power-over-EthernetPower Connector1removable10-contact terminal block(s)Power Consumption7.2W(max.)Reverse Polarity Protection SupportedEnvironmental LimitsOperating Temperature Standard Models:-25to60°C(-13to140°F)Wide Temp.Models:-40to75°C(-40to167°F)Storage Temperature(package included)-40to85°C(-40to185°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsEMC EN61000-6-2/-6-4EMI CISPR32,FCC Part15B Class BEMS IEC61000-4-2ESD:Contact:8kV;Air:15kVIEC61000-4-3RS:80MHz to1GHz:3V/mIEC61000-4-4EFT:Power:2kV;Signal:2kVIEC61000-4-5Surge:Power:2kV;Signal:1kVIEC61000-4-6CS:3VIEC61000-4-8PFMFHazardous Locations ATEX,Class I Division2,IECExRadio ANATEL,EN300328,EN301489-1/17,EN301893,FCC ID SLE-WAPN008,MIC,NCC,RCM,SRRC,WPC,KC,RCMSafety EN60950-1,UL60950-1Vibration IEC60068-2-6MTBFTime570,854hrsWarrantyWarranty Period5yearsDetails See /warrantyPackage ContentsDevice1x AWK-3131A Series wireless AP/bridge/clientInstallation Kit2x cap,plastic,for RJ45port1x DIN-rail kit1x cable holder with screwAntenna2x2.4/5GHz antennaDocumentation1x quick installation guide1x warranty cardDimensionsOrdering InformationModel Name Band Standards Operating Temp. AWK-3131A-EU EU802.11a/b/g/n-25to60°C AWK-3131A-EU-T EU802.11a/b/g/n-40to75°C AWK-3131A-JP JP802.11a/b/g/n-25to60°C AWK-3131A-JP-T JP802.11a/b/g/n-40to75°C AWK-3131A-US US802.11a/b/g/n-25to60°C AWK-3131A-US-T US802.11a/b/g/n-40to75°C Accessories(sold separately)AntennasANT-WDB-ANF-0407 2.4/5GHz,omni-directional antenna,4/7dBi,N-type(male)ANT-WDB-ANM-0306 2.4/5GHz,omni-directional antenna,3/6dBi,N-type(male)ANT-WDB-ANM-0407Dual-band omni-directional antennas,4dBi at2.4GHz or7dBi at5GHzANT-WDB-ANM-0502 2.4/5GHz,omni-directional antenna,5/2dBi,N-type(male)ANT-WDB-ANM-0609 2.4/5GHz,omni-directional antenna,6/9dBi,N-type(male)ANT-WDB-ARM-02 2.4/5GHz,omni-directional rubber duck antenna,2dBi,RP-SMA(male)ANT-WDB-ARM-0202 2.4/5GHz,panel antenna,1.8/1.8dBi,RP-SMA(male)ANT-WDB-PNF-1518 2.4/5GHz,panel antenna,15/18dBi,N-type(female)MAT-WDB-CA-RM-2-0205 2.4/5GHz,ceiling antenna,2/5dBi,MIMO2x2,RP-SMA-type(male)MAT-WDB-DA-RM-2-0203-1m 2.4/5GHz,desktop antenna,2/3dBi,MIMO2x2,RP-SMA-type(male),1m cableMAT-WDB-PA-NF-2-0708 2.4/5GHz,panel antenna,7/8dBi,MIMO2x2,N-type(female)ANT-WSB5-ANF-125GHz,omni-directional antenna,12dBi,N-type(female)ANT-WSB5-PNF-185GHz,directional panel antenna,18dBi,N-type(female)ANT-WSB-ANF-09 2.4GHz,omni-directional antenna,9dBi,N-type(female)ANT-WSB-PNF-12 2.4GHz,directional panel antenna,12dBi,N-type(female)ANT-WSB-PNF-18 2.4GHz,directional panel antenna,18dBi,N-type(female)ANT-WSB-AHRM-05-1.5m 2.4GHz,omni-directional/dipole antenna,5dBi,RP-SMA(male),1.5m cableWireless AdaptorsA-ADP-RJ458P-DB9F-ABC01DB9female to RJ45connector for the ABC-01Wireless Antenna CableA-CRF-RFRM-R4-150RF magnetic stand,RP-SMA(male)to RP-SMA(female),RG-174/U cable,1.5mA-CRF-RFRM-S2-60SS402cable,RP-SMA(male)to RP-SMA(female)A-CRF-RMNM-L1-300N-type(male)to RP SMA(male),LMR-195Lite cable,3mA-CRF-RMNM-L1-600N-type(male)to RP SMA(male),LMR-195Lite cable,6mA-CRF-RMNM-L1-900N-type(male)to RP SMA(male),LMR-195Lite cable,9mSurge ArrestorA-SA-NFNF-01Surge arrestor,N-type(female)to N-type(female)A-SA-NMNF-01Surge arrester,N-type(female)to N-type(male)Wireless Terminating ResistorA-TRM-50-RM Termination resistor,50ohms,N-type maleWireless Antenna CableCRF-N0117SA-3M N-type(male)to RP SMA(male),CFD200cable,3mWall-Mounting KitsWK-51-01Wall-mounting kit,2plates,6screws,51.6x67x2mm©Moxa Inc.All rights reserved.Updated Nov12,2018.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。
配置与ISE 2.0和阿鲁巴WLC的访客流目录简介先决条件要求使用的组件背景信息访客流配置步骤1.添加阿鲁巴WLC作为ISE的纳季。
步骤2.配置授权配置文件。
步骤3.配置授权策略。
步骤4.配置在阿鲁巴的RADIUS服务器。
步骤5.创建在阿鲁巴的访客SSID。
步骤6.配置俘虏门户。
步骤7.配置用户角色。
验证故障排除失败的COA重定向问题在用户浏览器的没有重定向URL存在超时的会话缝的计时器简介本文配置访客门户的descrbies步骤用阿鲁巴无线局域网控制器(WLC)。
从身份服务引擎(ISE)第三方网络访问的版本2.0支持设备(NAD)介绍。
ISE当前支持集成用访客的阿鲁巴无线,状态并且带来您自己的设备(BYOD)流。
注意:思科对配置或支持不负责设备的从其他供应商。
先决条件要求Cisco 建议您了解以下主题:阿鲁巴IAP配置q在ISE的访客流q使用的组件阿鲁巴IAP 204软件6.4.2.3q思科身份服务引擎2.0q背景信息访客流步骤1.用户关联对服务集Identifer (SSID)。
SSID可以配置如开放或与预先共享密钥验证。
步骤2.阿鲁巴应用用户角色对此连接。
第一个用户角色总是SSID。
用户角色包含不同的设置类似VLAN,访问控制限制,俘虏PORTAL设置等等。
在当前示例默认用户角色分配到SSID有Permit仅所有语句。
步骤3. SSID配置提供过滤在外部RADIUS服务器的MAC。
Radius MAB (MAC验证旁路)访问请求发送对ISE。
第四步:在策略评估时间ISE选择访客的授权配置文件。
此授权配置文件包含访问类型相等与ACCESS_ACCEPT和阿鲁巴用户角色相等与用户角色在阿鲁巴WLC配置的本地名称(无线局域网控制器)。
此用户角色为俘虏PORTAL配置,并且流量重定向往ISE。
阿鲁巴用户角色由阿鲁巴WLC使用的主要组件是用户角色。
用户角色定义了访问限制可适用对用户在连接时。
访问限制能包括:俘虏门户重定向,访问控制表, VLAN (虚拟局域网),带宽限制和其他。
Nokia FastMile 5G GatewayThe plug-and-play solution is simple to install and uses a visual guide to assist customers in identifying the right location in the home that will achieve the best performance. Compatibility with the Nokia in-home Wi-Fi solution ensures that a seamless ultra-broadband experience is achieved in every corner of the home. The Nokia FastMile 5G Gateway maximizes spectral assets and uses the industry’s highest gain (11 dBi) antenna to deliver up to twice the indoor coverage, three times the downlink capacity and five times the uplink capacity compared to traditional designs.Features• Fully self-contained, full featured indoor residential gateway • 5G New Radio (NR) WAN connection with 11 dBi high gain antenna • 4G WAN• Carrier aggregation across supported 4G/5G bands • 2.5 Gigabit Ethernet (GigE) WAN • 3 GigE LAN• Wi-Fi (3x3 802.11b/g/n, 4x4 802.11ac MU-MIMO) LAN • Visual cues guide the consumer to the optimal location for 5G performance in the homeNote: Features content based on R1.0 baseline.The Nokia FastMile 5G Gateway is designed to help operators capitalize on the growing 5G market. The solution delivers a single indoor device that is easy to deploy and connects wirelessly to the mobile network. With carrier aggregation, the gateway improves performance and reliability by using the best available 4G and 5G signals.5G GatewayMain functions• 5G high gain antenna, automated antenna alignment, gain in n78: 11 dBi maximum • Multiband omni antenna for L TE • Integrated residential gateway• Central point of mesh network with Nokia WiFi Beacon 3sRadio – cellular• 3GPP, release December 15 – 5G NR Non-Standalone (NSA) option 3a, 3x • 5G NR interface band n78 TD 3500 MHz (3300 MHz – 3800 MHz)• Dual connectivity (EN-DC)–1 L TE + DC 5G (1+n78, 3+n78, 7+n78, 28+n78) –2 L TE + DC 5G (1+3+n78, 1+7+n78, 3+7+n78) –3 L TE + DC 5G (1+3+7+n78)• Downlink (DL) 4x4 multiple input, multiple output (MIMO) and 256 QAM • Uplink (UL) 1x1 single input, single output (SISO) and 64 QAM • Supported carrier bandwidths–5G: 20 MHz, 40 MHz, 60 MHz, 80 MHz, 100 MHz –4G/L TE: 5 MHz, 10 MHz, 15 MHz, 20 MHz • FDD B1 (2100 MHz), B3 (1800 MHz), B7 (2600 MHz), B28 (700 MHz), TDD B40 (2300 MHz)• Extensive carrier aggregation between supported bandsRadio – Wi-Fi• Dual-band concurrent IEEE 802.11b/g/n 3x3 2.4 GHz and 802.11ac 4x4 5 GHz • Mesh topology with Nokia WiFi Beacon 3s • Seamless roaming (IEEE 802.11k, 802.11v)Benefits• Delivers gigabit home services with 5G NR • Automatic 5G antenna alignment ensures maximum signal and minimal noise • High gain antenna maximizes performance and conserves spectral assets • Reduced deployment costs with subscriber self-installation • Extends 5G speeds throughout the home with Nokia WiFi beacons • Part of Nokia end-to-end 5G solutionTechnical specificationsPhysical• Height: 240 mm (9.4 in)• Width: 140 mm (5.5 in)• Weight: 2.2 kg (4.9 lb)Operating environment• Temperature: 0°C to 45°C (32°F to 113°F)Power requirements• 12 V DC• Consumption: 41 W maximum DC power supplyNetwork terminations• Cellular WAN –5G NR (3GPP)–4G/Long Term Evolution (L TE) –SIM slot (size: 4FF/nano)• 2.5 GigE WANConnectivity interfaces• Wi-Fi (802.11b/g/n, 802.11ac)• Three RJ-45 GigE LAN ports • USB 3.0 Type A portAbout NokiaWe create the technology to connect the world. Powered by the research and innovation of Nokia Bell Labs, we serve communications service providers, governments, large enterprises and consumers, with the industry’s most complete, end-to-end portfolio of products, services and licensing.From the enabling infrastructure for 5G and the Internet of Things, to emerging applications in digital health, we are shaping the future of technology to transform the human experience. Nokia operates a policy of ongoing development and has made all reasonable efforts to ensure that the content of this document is adequate and free of material errors and omissions. Nokia assumes no responsibility for any inaccuracies in this document and reserves the right to change, modify, transfer, or otherwise revise this publication without notice.Nokia is a registered trademark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or trade names of their respective owners.© 2019 NokiaNokia Oyj Karaportti 3Security• Adheres to strict Nokia security standards • Wi-Fi Protected Access (WPA) support, including WPA Pre-Shared Key (PSK) and WPA2Management• Multicolor LEDs for status view• Web user interface (WUI) for local configurations • TR-69 auto-configuration server (ACS) access for remote device managementButtons• Power on/off• Wi-Fi Protected Setup (WPS) • ResetRegulatory compliance• CE and RCM。