三洋岛柜使用说明书

NoticeCORRECTIONSERVICE FLASHPRODUCTION CHANGEADDED INFORMATIONREFERENCE NO. 700855-02FILE NO.Please add this notice to the TECHNICAL & SERVICE MANUAL listed below.For Parts or Service Assistance please contact your local Sanyo HVAC Contractor or DistributorUnited States: SCS, HVAC Solutions Web: Parts:********************.com Service:**********************.comCanada: Sanyo Canada Inc.Web: Parts/Service:**************.com4/10 Printed in JapanTECHNICAL & SERVICE MANUALOUTDOOR UNIT : CMH1972ACMH2472A CMH3172ADC INVERTER MULTI-SYSTEM AIR CONDITIONERDestination: North AmericaProduct Code No.1 852 356 131 852 356 091 852 356 10REFERENCE NO. 700855-02Capacity at 230V 19,100 BTU/h 23,200 BTU/h 30,600 BTU/hOutdoor Model No.CMH1972A CMH2472A CMH3172ACMH1972ACMH2472ACMH3172AFILE NO.••Items in particular which may cause death or serious injury to the service personnel if the work is not performed correctly,if not performed correctly.Important safety precautions are described for all items in both categories. Be sure to carefully follow all of them.• Symbol Indication:This symbol indicates items to which we need to pay attention.In this triangle, a definite precautionary item is described.:This symbol indicates the item to be prohibited.In or close to this circle, a prohibited item is described.This symbol indicates the items requiring special attention or instruction.In or close to this circle, a prohibited item is described.• After doing repair work, perform a test run to confirm that there are no abnormalities.At the same time, explain the precautions in use to the user.SAFETY PRECAUTIONSTable of Contents24678141718212447535962687172737478...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................PageTABLE OF CONTENTS APPLICABLE INDOOR UNITS 1. OPERATING RANGE 2. SPECIFICATIONS2-1. Unit Specifications 2-2. Major Component Specifications 2-3. Other Component Specifications 3. DIMENSIONAL DATA 4. REFRIGERANT FLOW DIAGRAM4-1. Refrigerant Flow Diagram 5. PERFORMANCE DATA5-1. Temperature Charts 5-2. Cooling Capacity 5-3. Heating Capacity 6. ELECTRICAL DATA6-1. Electric Wiring Diagrams 7. FUNCTIONS7-1. Explanation of Functions 7-2. Protective Functions 8. TROUBLESHOOTING8-1. Precautions before Performing Inspection or Repair 8-2. Trouble Diagnosis by Error Monitop Lamps 8-3. Checking the Outdoor System 8-4. Trouble Diagnosis of Each Part 8-5. Trouble Diagnosis of Fan Motor7980818182848585A-1A-2............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Page9. REFRIGERANT R410A:SPECIAL PRECAUTIONS WHEN SERVICING UNIT9-1. Characteristics of New Refrigerant R410A 9-2. Checklist before Servicing 9-3. Tools Specifically for R410A 9-4. Tubing Installation Procedures 9-5. In Case of Compressor Malfunction 9-6. In Case Refrigerant is Leaking 9-7. Charging Additional Refrigerant 9-8. Retro-Fitting Existing Systems APPENDIX A INSTALLATION INSTRUCTIONS APPENDIX B UNIT COMBINATION TABLESAPPLICABLE INDOOR UNITSCMH1972A CMH2472A CMH3172AMulti-Outdoor Unit Indoor Unit 3-Room 4-Room 4-RoomKMHS0772YES YES YESYES YES YESYES YES YESYES YES YESNO YES YESKMHS0972KMHS1272KMHS1872KMHS2472Wall Mounted TypeCMH1972A CMH2472A CMH3172AMulti-Outdoor Unit Indoor Unit3-Room 4-Room 4-RoomXMHS0972&PNR-XS1872YES YES YESYES YES YESYES YES YESXMHS1272&PNR-XS1872XHS1872&PNR-XS1872Semi-Concealed Type95 °F D.B. / 71 °F W.B.67 °F D.B. / 57 °F W.B.80 °F D.B. / 67 °F W.B. _ D.B. / _ W.B.1. OPERATING RANGEMaximum Minimum Maximum Minimum115 °F D.B. 14 °F D.B.75 °F D.B. / 65 °F W.B. 0 °F D.B.TemperatureIndoor Air Intake Temp.Outdoor Air Intake Temp.Cooling Heating2. SPECIFICATIONS2-1. Unit SpecificationsOutdoor Unit CMH1972A Indoor UnitKMHS0972 × 3Remarks:1.The values shown in performance section and electrical rating section above are based on the following unit combination.For other combination unit, please refer to the "Unit Combination Tables" in this manual. Indoor Unit : KMHS0972 3units Outdoor Unit : CMH1972A 1unit2.Rating conditions are:Cooling :Indoor air temp.80°F D.B./ 67°F W.B Heating :Indoor air temp.70°F D.B.Outdoor air temp.95°F D.B./ 75°F W.B.Outdoor air temp.47°F D.B./ 43°F W.B.< 230V >DATA SUBJECT TO CHANGE WITHOUT NOTICE.CompressorRefrigerant / Amount charged at shipment Ibs (g)Refrigerant Control( 11,600 to 24,800 )( 3.40 to 7.30 )6.71,5007.71,73519,1005.6024,8007.30( 9,800 to 19,100 )( 2.90 to 5.60 )Shipping VolumeCooling Heating16,3002,800Net ShippingPackage DimensionsWeightHeight × Width × Depth Height × Width × DepthIbs (kg)Ibs (kg)cu.ft (m 3)(mm)inch (mm)3-Room Multi Outdoor UnitOutdoor Unit inch --187 to 253D i m e n s i o n s & W e i g h tRefrigerant Tubing ConnectionsUnit DimensionsE l e c t r i c a l R a t i n gSensible Capacity Latent CapacityW Power Input V A Available Voltage Range Running Amperes Operation Sound (High) Cool / Heat Narrow tube Wide tube Refrigerant inch (mm)Tube Diameter inch (mm)143.3152.112.71(65.0)(69.0)(0.36)33-27/32 × 40-5/8 × 16-1/4(860 × 1,032 × 413)(740 × 900 × 320)Outdoor Unit29-1/8 × 35-7/16 × 12-19/321/4 (6.35) × 33/8 (9.52) × 3ft (m)dB-A Max. allowable tubing length per unit Flare Type 82 (25)R410A / 6.17 (2,800)Electric Expansion ValveDC Twin Rotary (Inverter)Fan Speeds Auto (Hi, Me, Lo)ControlMicroprocessor F e a t u r e s HSPFCompressor Locked Rotor Amperes BTU/Wh50 / 52BTU/h P e r f o r m a n c e-8.8%Power Factor 9898A 14.5TypeBTU/h kW Total CapacityBTU/h SEER BTU/Wh 16.4-3Number of Connectable Indoor Units 3Number of Operatable Indoor Units 230V Single-Phase 60HzVoltage Rating 1,707 (2,900)1,707 (2,900)Air Circulation (High)ft 3/min (m 3/h)COP W/W - 4.2EER BTU/h/W12.7-Fuse or Circuit Breaker CapacityA20Outdoor Unit CMH1972A Indoor UnitKMHS0972 × 3Remarks:1.The values shown in performance section and electrical rating section above are based on the following unit combination.For other combination unit, please refer to the "Unit Combination Tables" in this manual. Indoor Unit : KMHS0972 3units Outdoor Unit : CMH1972A 1unit2.Rating conditions are:Cooling :Indoor air temp.80°F D.B./ 67°F W.B Heating :Indoor air temp.70°F D.B.Outdoor air temp.95°F D.B./ 75°F W.B.Outdoor air temp.47°F D.B./ 43°F W.B.< 208V >DATA SUBJECT TO CHANGE WITHOUT NOTICE.CompressorRefrigerant / Amount charged at shipment Ibs (g)Refrigerant Control( 11,600 to 24,800 )( 3.40 to 7.30 )7.41,5008.51,73519,1005.6024,8007.30( 9,800 to 19,100 )( 2.90 to 5.60 )Shipping VolumeCooling Heating16,3002,800Net ShippingPackage DimensionsWeightHeight × Width × Depth Height × Width × DepthIbs (kg)Ibs (kg)cu.ft (m 3)(mm)inch (mm)3-Room Multi Outdoor UnitOutdoor Unit inch --187 to 253D i m e n s i o n s & W e i g h tRefrigerant Tubing ConnectionsUnit DimensionsE l e c t r i c a l R a t i n gSensible Capacity Latent CapacityW Power Input V A Available Voltage Range Running Amperes Operation Sound (High) Cool / Heat Narrow tube Wide tube Refrigerant inch (mm)Tube Diameter inch (mm)143.3152.112.71(65.0)(69.0)(0.36)33-27/32 × 40-5/8 × 16-1/4(860 × 1,032 × 413)(740 × 900 × 320)Outdoor Unit29-1/8 × 35-7/16 × 12-19/321/4 (6.35) × 33/8 (9.52) × 3ft (m)dB-A Max. allowable tubing length per unit Flare Type 82 (25)R410A / 6.17 (2,800)Electric Expansion ValveDC Twin Rotary (Inverter)Fan Speeds Auto (Hi, Me, Lo)ControlMicroprocessor F e a t u r e s HSPFCompressor Locked Rotor Amperes BTU/Wh50 / 52BTU/h P e r f o r m a n c e-8.8%Power Factor 9898A 14.5TypeBTU/h kW Total CapacityBTU/h SEER BTU/Wh 16.4-3Number of Connectable Indoor Units 3Number of Operatable Indoor Units 208V Single-Phase 60HzVoltage Rating 1,707 (2,900)1,707 (2,900)Air Circulation (High)ft 3/min (m 3/h)COP W/W - 4.2EER BTU/h/W12.7-Fuse or Circuit Breaker CapacityA20Outdoor Unit CMH2472A Indoor UnitKMHS0972 × 3Remarks:1.The values shown in performance section and electrical rating section above are based on the following unit combination.For other combination unit, please refer to the "Unit Combination Tables" in this manual. Indoor Unit : KMHS0972 3units Outdoor Unit : CMH2472A 1unit2.Rating conditions are:Cooling :Indoor air temp.80°F D.B./ 67°F W.B Heating :Indoor air temp.70°F D.B.Outdoor air temp.95°F D.B./ 75°F W.B.Outdoor air temp.47°F D.B./ 43°F W.B.< 230V >DATA SUBJECT TO CHANGE WITHOUT NOTICE.CompressorRefrigerant / Amount charged at shipment Ibs (g)Refrigerant Control( 11,600 to 29,200 )( 3.40 to 8.60 )9.02,04010.12,27023,2006.8029,2008.60( 9,800 to 23,200 )( 2.90 to 6.80 )Shipping VolumeCooling Heating19,6003,600Net ShippingPackage DimensionsWeightHeight × Width × Depth Height × Width × DepthIbs (kg)Ibs (kg)cu.ft (m 3)(mm)inch (mm)4-Room Multi Outdoor UnitOutdoor Unit inch --187 to 253D i m e n s i o n s & W e i g h tRefrigerant Tubing ConnectionsUnit DimensionsE l e c t r i c a l R a t i n gSensible Capacity Latent CapacityW Power Input V A Available Voltage Range Running Amperes Operation Sound (High) Cool / Heat Narrow tube Wide tube Refrigerant inch (mm)Tube Diameter inch (mm)143.3152.112.71(65.0)(69.0)(0.36)33-27/32 × 40-5/8 × 16-1/4(860 × 1,032 × 413)(740 × 900 × 320)Outdoor Unit29-1/8 × 35-7/16 × 12-19/321/4 (6.35) × 43/8 (9.52) × 3 + 1/2 (12.7) × 1ft (m)dB-A Max. allowable tubing length per unit Flare Type 82 (25)R410A / 6.17 (2,800)Electric Expansion ValveDC Twin Rotary (Inverter)Fan Speeds Auto (Hi, Me, Lo)ControlMicroprocessor F e a t u r e s HSPFCompressor Locked Rotor Amperes BTU/Wh50 / 52BTU/h P e r f o r m a n c e-8.4%Power Factor 9898A 14.5TypeBTU/h kW Total CapacityBTU/h SEER BTU/Wh 16.5-4Number of Connectable Indoor Units 4Number of Operatable Indoor Units 230V Single-Phase 60HzVoltage Rating 1,707 (2,900)1,707 (2,900)Air Circulation (High)ft 3/min (m 3/h)COP W/W - 3.8EER BTU/h/W11.4-Fuse or Circuit Breaker CapacityA20Outdoor Unit CMH2472A Indoor UnitKMHS0972 × 3Remarks:1.The values shown in performance section and electrical rating section above are based on the following unit combination.For other combination unit, please refer to the "Unit Combination Tables" in this manual. Indoor Unit : KMHS0972 3units Outdoor Unit : CMH2472A 1unit2.Rating conditions are:Cooling :Indoor air temp.80°F D.B./ 67°F W.B Heating :Indoor air temp.70°F D.B.Outdoor air temp.95°F D.B./ 75°F W.B.Outdoor air temp.47°F D.B./ 43°F W.B.< 208V >DATA SUBJECT TO CHANGE WITHOUT NOTICE.CompressorRefrigerant / Amount charged at shipment Ibs (g)Refrigerant Control( 11,600 to 29,200 )( 2.90 to 8.60 )10.02,04011.12,27023,2006.8029,2008.60( 9,800 to 23,200 )( 2.90 to 6.80 )Shipping VolumeCooling Heating19,6003,600Net ShippingPackage DimensionsWeightHeight × Width × Depth Height × Width × DepthIbs (kg)Ibs (kg)cu.ft (m 3)(mm)inch (mm)4-Room Multi Outdoor UnitOutdoor Unit inch --187 to 253D i m e n s i o n s & W e i g h tRefrigerant Tubing ConnectionsUnit DimensionsE l e c t r i c a l R a t i n gSensible Capacity Latent CapacityW Power Input V A Available Voltage Range Running Amperes Operation Sound (High) Cool / Heat Narrow tube Wide tube Refrigerant inch (mm)Tube Diameter inch (mm)143.3152.112.71(65.0)(69.0)(0.36)33-27/32 × 40-5/8 × 16-1/4(860 × 1,032 × 413)(740 × 900 × 320)Outdoor Unit29-1/8 × 35-7/16 × 12-19/321/4 (6.35) × 43/8 (9.52) × 3 + 1/2 (12.7) × 1ft (m)dB-A Max. allowable tubing length per unit Flare Type 82 (25)R410A / 6.17 (2,800)Electric Expansion ValveDC Twin Rotary (Inverter)Fan Speeds Auto (Hi, Me, Lo)ControlMicroprocessor F e a t u r e s HSPFCompressor Locked Rotor Amperes BTU/Wh50 / 52BTU/h P e r f o r m a n c e-8.4%Power Factor 9898A 14.5TypeBTU/h kW Total CapacityBTU/h SEER BTU/Wh 16.5-4Number of Connectable Indoor Units 4Number of Operatable Indoor Units 208V Single-Phase 60HzVoltage Rating 1,707 (2,900)1,707 (2,900)Air Circulation (High)ft 3/min (m 3/h)COP W/W - 3.8EER BTU/h/W11.4-Fuse or Circuit Breaker CapacityA20Outdoor Unit CMH3172A Indoor UnitKMHS0972 × 4Remarks:1.The values shown in performance section and electrical rating section above are based on the following unit combination.For other combination unit, please refer to the "Unit Combination Tables" in this manual. Indoor Unit : KMHS0972 4units Outdoor Unit : CMH3172A 1unit2.Rating conditions are:Cooling :Indoor air temp.80°F D.B./ 67°F W.B Heating :Indoor air temp.70°F D.B.Outdoor air temp.95°F D.B./ 75°F W.B.Outdoor air temp.47°F D.B./ 43°F W.B.< 230V >DATA SUBJECT TO CHANGE WITHOUT NOTICE.CompressorRefrigerant / Amount charged at shipment Ibs (g)Refrigerant Control( 11,600 to 32,000 )( 3.40 to 9.40 )12.32,80010.32,35030,6009.0032,0009.40( 9,800 to 30,600 )( 2.90 to 9.00 )Shipping VolumeCooling Heating25,8004,800Net ShippingPackage DimensionsWeightHeight × Width × Depth Height × Width × DepthIbs (kg)Ibs (kg)cu.ft (m 3)(mm)inch (mm)4-Room Multi Outdoor UnitOutdoor Unit inch --187 to 253D i m e n s i o n s & W e i g h tRefrigerant Tubing ConnectionsUnit DimensionsE l e c t r i c a l R a t i n gSensible Capacity Latent CapacityW Power Input V A Available Voltage Range Running Amperes Operation Sound (High) Cool / Heat Narrow tube Wide tube Refrigerant inch (mm)Tube Diameter inch (mm)180.8189.615.18(82.0)(86.0)(0.43)39-3/4 × 40-5/8 × 16-1/4(1,010 × 1,032 × 413)(890 × 900 × 320)Outdoor Unit35-1/32 × 35-7/16 × 12-19/321/4 (6.35) × 43/8 (9.52) × 2 + 1/2 (12.7) × 2ft (m)dB-A Max. allowable tubing length per unit Flare Type 100 (30.5)R410A / 8.38 (3,800)Electric Expansion ValveDC Twin Rotary (Inverter)Fan Speeds Auto (Hi, Me, Lo)ControlMicroprocessor F e a t u r e s HSPFCompressor Locked Rotor Amperes BTU/Wh53 / 52BTU/h P e r f o r m a n c e-9.3%Power Factor 9999A 17.0TypeBTU/h kW Total CapacityBTU/h SEER BTU/Wh 17.2-4Number of Connectable Indoor Units 4Number of Operatable Indoor Units 230V Single-Phase 60HzVoltage Rating 1,942 (3,300)1,807 (3,070)Air Circulation (High)ft 3/min (m 3/h)COP W/W - 4.0EER BTU/h/W10.9-Fuse or Circuit Breaker CapacityA20Outdoor Unit CMH3172A Indoor UnitKMHS0972 × 4Remarks:1.The values shown in performance section and electrical rating section above are based on the following unit combination.For other combination unit, please refer to the "Unit Combination Tables" in this manual. Indoor Unit : KMHS0972 4units Outdoor Unit : CMH3172A 1unit2.Rating conditions are:Cooling :Indoor air temp.80°F D.B./ 67°F W.B Heating :Indoor air temp.70°F D.B.Outdoor air temp.95°F D.B./ 75°F W.B.Outdoor air temp.47°F D.B./ 43°F W.B.< 208V >DATA SUBJECT TO CHANGE WITHOUT NOTICE.CompressorRefrigerant / Amount charged at shipment Ibs (g)Refrigerant Control( 11,600 to 32,000 )( 3.40 to 9.40 )13.62,80011.42,35028,6008.4032,0009.40( 9,800 to 28,600 )( 2.90 to 8.40 )Shipping VolumeCooling Heating24,2004,400Net ShippingPackage DimensionsWeightHeight × Width × Depth Height × Width × DepthIbs (kg)Ibs (kg)cu.ft (m 3)(mm)inch (mm)4-Room Multi Outdoor UnitOutdoor Unit inch --187 to 253D i m e n s i o n s & W e i g h tRefrigerant Tubing ConnectionsUnit DimensionsE l e c t r i c a l R a t i n gSensible Capacity Latent CapacityW Power Input V A Available Voltage Range Running Amperes Operation Sound (High) Cool / Heat Narrow tube Wide tube Refrigerant inch (mm)Tube Diameter inch (mm)180.8189.615.18(82.0)(86.0)(0.43)39-3/4 × 40-5/8 × 16-1/4(1,010 × 1,032 × 413)(890 × 900 × 320)Outdoor Unit35-1/32 × 35-7/16 × 12-19/321/4 (6.35) × 43/8 (9.52) × 2 + 1/2 (12.7) × 2ft (m)dB-A Max. allowable tubing length per unit Flare Type 100 (30.5)R410A / 8.38 (3,800)Electric Expansion ValveDC Twin Rotary (Inverter)Fan Speeds Auto (Hi, Me, Lo)ControlMicroprocessor F e a t u r e s HSPFCompressor Locked Rotor Amperes BTU/Wh53 / 52BTU/h P e r f o r m a n c e-9.3%Power Factor 9999A 17.0TypeBTU/h kW Total CapacityBTU/h SEER BTU/Wh 17.2-4Number of Connectable Indoor Units 4Number of Operatable Indoor Units 208V Single-Phase 60HzVoltage Rating 1,942 (3,300)1,807 (3,070)Air Circulation (High)ft 3/min (m 3/h)COP W/W - 4.0EER BTU/h/W10.9-Fuse or Circuit Breaker CapacityA20Outdoor UnitCMH1972A2-2-1. Outdoor UnitControl PCBControl Circuit Fuse ControlsPart No.Microprocessor 250V 25ACB-CMH1972A Pints (cc) -Micro F VACExternal FinishAcrylic baked-on enamel finishFV50S ... 1.91 (900)--Internal ControllerYes Yes Aluminum Plate Fin / Copper Tube218.1 Face Area ft 2 (m 2)6.40 (0.595) Coil RowsFins per inch Heat Exchanger CoilSIC-71FW-D490-1 (1)Compressor Oil ... Amount 890750 / 750OhmDC MotorTypeCompressor Model / Nominal Output CompressorCoil Resistance (Ambient Temp. 68 °F (20 °C))OhmDC Twin Rotary (Hermetic)5KD240XAB21 / 1,700W U - V :V - W :W - U :0.7200.7080.726CT (Peak current cut-off control)Compressor Discharge Temp. ControlOperation cut-off control in abnormal ambient Temp.Safety DeviceMicro F VACRun Capacitor Crankcase HeaterYes Yes Yes Overload RelayCS-7L-2515ModelOperation Temp.Open : 239 °F (115 °C), Close : 212 °F (100 °C)--230V 30W1 ... D18-1/8 (D460)FanPropellerQ'ty ... Dia.inch (mm)TypeTypeOver-Current Protection Over-Heat Protection(Ambient Temp. 68 °F (20 °C)) Fan MotorNominal Output Coil ResistanceSafety DeviceRough Measure RPM (Cool / Heat)Run Capacitor TypeModel ... Q'ty No. of PolesW 2-2. Major Component SpecificationsOutdoor Unit CMH2472AControl PCBControl Circuit Fuse ControlsPart No.Microprocessor 250V 25ACB-CMH2472A Pints (cc) -Micro F VACExternal FinishAcrylic baked-on enamel finishFV50S ... 1.91 (900)--Internal ControllerYes Yes Aluminum Plate Fin / Copper Tube218.1 Face Area ft 2 (m 2)6.40 (0.595) Coil RowsFins per inch Heat Exchanger CoilSIC-71FW-D490-1 (1)Compressor Oil ... Amount 890750 / 750OhmDC MotorTypeCompressor Model / Nominal Output CompressorCoil Resistance (Ambient Temp. 68 °F (20 °C))OhmDC Twin Rotary (Hermetic)5KD240XAB21 / 1,700W U - V :V - W :W - U :0.7200.7080.726CT (Peak current cut-off control)Compressor Discharge Temp. ControlOperation cut-off control in abnormal ambient Temp.Safety DeviceMicro F VACRun Capacitor Crankcase HeaterYes Yes Yes Overload RelayCS-7L-2515ModelOperation Temp.Open : 239 °F (115 °C), Close : 212 °F (100 °C)--230V 30W1 ... D18-1/8 (D460)FanPropellerQ'ty ... Dia.inch (mm)TypeTypeOver-Current Protection Over-Heat Protection(Ambient Temp. 68 °F (20 °C)) Fan MotorNominal Output Coil ResistanceSafety DeviceRough Measure RPM (Cool / Heat)Run Capacitor TypeModel ... Q'ty No. of PolesWOutdoor Unit CMH3172AControl PCBControl Circuit Fuse ControlsPart No.Microprocessor 250V 25ACB-CMH3172A Pints (cc) -Micro F VACExternal FinishAcrylic baked-on enamel finishFV50S ... 2.55 (1,200)--Internal ControllerYes Yes Aluminum Plate Fin / Copper Tube218.1 Face Area ft 2 (m 2)7.75 (0.72) Coil RowsFins per inch Heat Exchanger CoilSIC-71FW-D490-1 (1)Compressor Oil ... Amount 890800 / 750OhmDC MotorTypeCompressor Model / Nominal Output CompressorCoil Resistance (Ambient Temp. 68 °F (20 °C))OhmDC Twin Rotary (Hermetic)5JD420XAB22 / 3,000W U - V :V - W :W - U :0.4350.4410.452CT (Peak current cut-off control)Compressor Discharge Temp. ControlOperation cut-off control in abnormal ambient Temp.Safety DeviceMicro F VACRun Capacitor Crankcase HeaterYes Yes Yes Overload RelayCS-7L-2515ModelOperation Temp.Open : 239 °F (115 °C), Close : 212 °F (100 °C)--230V 30W1 ... D18-1/8 (D460)FanPropellerQ'ty ... Dia.inch (mm)TypeTypeOver-Current Protection Over-Heat Protection(Ambient Temp. 68 °F (20 °C)) Fan MotorNominal Output Coil ResistanceSafety DeviceRough Measure RPM (Cool / Heat)Run Capacitor TypeModel ... Q'ty No. of PolesWTemperature F ( C)403530252015105(-20)(-15)(-10)(-5)(0)(5)(10)(15)(20)-4514233241505968Resistance(kohm)3250688610412214015817619440608010012014016018020020Resistance(kohm)2-3. Other Component SpecificationsCMH1972A CMH2472A CMH3172A Sensor NameCompressor temp sensor TKS293BModel No.of sensor11Quantity of Sensor1 Outdoor air temp sensorOutdoor heat exchanger sensorAW / AN sensorBW / BN sensorCW / CN sensorDW / DN sensorTKS295BTKS292BTKS292BTKS292BTKS292BTKS292BModel No.of sensorSensor Name111 / 11 / 11 / 1Quantity of Sensor111 / 11 / 11 / 11 / 1111 / 11 / 11 / 11 / 1CMH1972A CMH2472A CMH3172A3. DIMENSIONAL DATAOutdoor Unit CMH1972AUnit: inch(mm)(852-0-0010-11200-0)Unit: inch(mm)(852-0-0010-20400-0)Unit: inch(mm)(852-0-0010-20300-0)Cooling cycle Heating cycleIndoor unitOutdoor unit4. REFRIGERANT FLOW DIAGRAM4-1. Refrigerant Flow DiagramOutdoor Unit CMH1972AInsulation of Refrigerant TubingBecause capillary tubing is used in the outdoor unit, both the wide and narrow tubes of this air conditioner become cold. To prevent heat loss and wet floors due to dripping ofcondensation, both tubes must be well insulated with a proper insulation material. The thickness of the insulation should be a min.5/16"(8 mm).After a tube has been insulated,never try to bend it into a narrow curve because it can cause the tube to break or crack.Thickness:Outdoor Unit CMH2472AInsulation of Refrigerant TubingBecause capillary tubing is used in the outdoor unit, both the wide and narrow tubes of this air conditioner become cold. To prevent heat loss and wet floors due to dripping ofcondensation, both tubes must be well insulated with a proper insulation material. The thickness of the insulation should be a min.5/16"(8 mm).After a tube has been insulated,never try to bend it into a narrowcurve because it can cause the tubeto break or crack.Thickness:Cooling cycleHeating cycleIndoor unit Outdoor unitCooling cycleHeating cycleIndoor unitOutdoor unitOutdoor Unit CMH3172AInsulation of Refrigerant TubingBecause capillary tubing is used in the outdoor unit, both the wide and narrow tubes of this air conditioner become cold. To prevent heat loss and wet floors due to dripping ofcondensation, both tubes must be well insulated with a proper insulation material. The thickness of the insulation should be a min.5/16"(8 mm).After a tube has been insulated,never try to bend it into a narrow curve because it can cause the tube to break or crack.Thickness:。

SANYO 超低温冰箱简要操作手册一.安全操作的注意事项：以下项目和条款的说明将使您正确和安全的使用这套设备。

如果您按照注意事项进行操作，可能会保证您和他人免受意外的伤害。

操作的注意事项有以下的不同形式警告切勿在室外使用此设备。

如果被雨水淋到可能会发生漏电的危险必须是专业的工程师来进行设备的安装操作。

非专业的操作人员可能会因为不规范的操作而引发触电或者火灾。

安装设备的地点一定要是结实稳固的。

如果安装地点不够结实稳固，就可能发生仪器的倾倒而导致危险不要把设备安装在潮湿的地点和可能喷溅到水的地方。

如果破坏了设备的绝缘性，就可能造成漏电或者触电。

不要把设备安装在有易燃，易挥发危险品的地方。

否则可能会引起火灾。

不要把设备安装在有酸性或有腐蚀性气体的地点。

否则可能引起漏电和触电。

使用专门的电源。

电源连接插销一定要插好。

接触不好电源连接会导致产热甚至明火。

使用的电源一定要有地线。

以防止触电。

如果发接电源没有地线，必须要专门的工程师安装好地线。

不要把设备安装在气体管道、供水水管，电话线以及避雷针的附近。

在意外的情况下有导致触电的危险。

不要在没有或者不能密封好的情况下在设备中贮藏易燃或者易挥发的物品。

否则有可能引起泄漏或者起火。

不要在没有或者不能密封好的情况下在设备中贮藏腐蚀性的物品。

否则可能损害到内部的附件或者电子器件。

不要把任何金属的物品如针，金属丝等插在任何通风或者换气循环的通气口处。

否则这样会引起触电或者损害连接的部件。

当处理有毒、有害或者放射性物品时，要保证使用此设备在安全的条件下。

否则可能对使用者或者环境造成危害。

进行任何维护或者维修的时候，必须切断电源。

否则有可能引起触电或伤害。

警告在使用药品或粉末物品的时候确保不会被呼吸进入体内。

这对使用者的身体有害。

不要把水直接溅到设备上面。

这样可能会导致触电或者短路。

不要自己拆卸、修理或者修正设备。

任何诸如此类的操作如果由非专业的人来做，会有可能造成起火或者设备的损害设备发生故障的时候要切断电源。

EXC系列冷柜安装指导1、TVQ系列柜体连接方法2、TVQ端头系列柜体连接方法3、TVQ豪华侧板系列连接方法4、FPW_CPW_CVS直柜柜体连接方法5、ME-EXC204L_R连接方法6、MER-EXC204L_R连接方法7、MER-EXC XXX AL(R)EXC豪华侧板与直柜柜体连接方法8、FAM柜体连接以及之字梁调整方法TVQ-EXC直柜连接方法一、 密封海绵胶带的粘贴方法柜体和柜体连接时请在一侧柜体侧粘贴附属品海绵胶带,粘贴位置如图1所示。

〈注〉海绵胶带粘贴不良会导致冷却不良，发生结露,要十分注意，妥善粘贴。

图1二、 柜体的连接方法1、粘贴海绵胶带后，如图2中A部显示,将备件中黑色树脂连接销插入一侧柜体铝扶手里，再利用地脚螺栓和调节钢板对柜体进行高度调节，同时进行水平调整后，将连接销插入对面柜体铝扶手中,将柜体尽量合在一起（两个柜体外观件之间此时还存在缝隙），小心挤手。

图2A防撞条支撑钣金件BA图22、如图3所示将柜体连接件通过连接孔安装到一侧柜体上（4处），再利用孔位调节棒通过柜体连接件的调整孔，插到防撞条支撑钣金件的调整孔中，然后摆动孔位调节棒，直至两柜体所有外观件达到无缝隙状态，再将另侧柜体上用螺栓固定（4处）。

柜体连接钣金件图33、所有外观件调好后卸下盖板，回风风道板的扣盖，如下图4所示，1处请用M8螺栓固定柜体，2处请用M5螺钉固定柜体。

图44、整个柜体连接好后，将复层玻璃上扶手向两边滑开，按照下图所示安装铁制的连接销，再左右滑动微调，将扶手条到无缝隙状态。

TVQ-EXC 端头柜连接方法一、密封海绵胶带的粘贴方法端头柜和直柜连接时请在直柜侧粘贴附属品海绵胶带,粘贴位置如图1所示。

〈注〉海绵胶带粘贴不良会导致冷却不良，发生结露,要十分注意，妥善粘贴。

二、柜体的连接方法1、 粘贴海绵胶带后，如图2中A 部显示，将备件中黑色树脂连接销插入一侧柜体铝扶手里，再利用地脚螺栓和调节钢板对柜体进行高度调节,同时进行水平调整后，将连接销插入对面柜体铝扶手中,柜体尽量合在一起（两个柜体外观件之间此时还存在缝隙），小心挤手。

SCC 101EValid as of E11SE0404 up to E11SE.... Electrical unit X SCC 101EVoltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 X1Control panel2 X2Electrical installation3 X3Clima Plus4 X4Steam generator, Bypass5 X5Hot air heating6 X6Motor and fan wheel7 X7Interior cabinet8 X8Door9 X9Water supply, quenching box10 X10Hand shower11 X11CleanJet13 X13Exterior cabinet14 X14MiscellaneousSCC 101EElectrical unit X Table of contentsVoltage: 3 NAC 400V 50-60Hz1 Control panel (3)1.A Control panel (4)2 Electrical installation (5)2.A Contactor assembly (6)2.B Cable entry (8)3 Clima Plus (9)3.A Hose set f. humidity control (10)4 Steam generator, Bypass (11)4.A Pump connection spout cpl (12)4.B Venting valve for steam generator (13)5 Hot air heating (14)6 Motor and fan wheel (15)7 Interior cabinet (16)7.A Interior cabinet (17)7.B Gasket frame w. glass a. gaskets (18)7.C Air baffle (19)7.C Air baffle (20)8 Door (21)8.A Door (22)9 Water supply, quenching box (23)10 Hand shower (24)11 CleanJet (25)13 Exterior cabinet (26)13.A Exterior cabinet (27)14 Miscellaneous (28)1 Control panel Voltage 3 NAC 400V 50-60HzItem no. Part no Reference DescriptionA X1.A Control panel1 87.00.000 Control panel insert with overlay1 Control panel Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 42.00.002 Control pcb2 1104.0121 Hex nut M4 self locking3 10.00.355 Spacer black4 2020.0400 Fixing device for cable harness5 16.00.232 Dial f. pulse generator6 40.02.087 Buzzer6 3006.0107 Buzzer7 5110.1029 Gasket mode switch7 5110.1028 Gasket poti hot air, core temperature8 40.00.404 Pulse generator9 16.00.387 Mounting device f.sealing + sealing lip10 1306.0218 Washer A4,311 1103.0122 Hex nut M3 self-lockingElectrical unit X 2 Electrical installation 22 Electrical installation Voltage3 NAC 400V 50-60HzItem no. Part no Reference DescriptionA X2.A Contactor assemblyB 40.00.306 X2.B Cable entry1 4007.0620 Membrane DGC 292 4007.0621 Membrane DGC 363 40.01.589 Solid state relais4 10.00.507 Pan head screw Torx 5/16" T205 10.00.444 Raised countersunk head screw Torx M4x86 1106.0803 Hex combination nut M6 galv7 10.00.239 EJOT PT-Screw Torx 4x108 1105.0121 Hex combination nut M5 galv9 42.00.007 External memory10 40.00.049 Relay-I/O pcb10 42.00.045 Relay-I/O pcb w/o Sicotronic11 40.00.417 Fixing clip f. pcb12 1104.0801 Cage nut M413 10.00.243 Spacer M4x814 1104.0120 Hex nut M415 10.00.112 Cable clip short16 10.00.111 Cable clip long17 10.00.471 Cable clip d10-12mm18 8801.0136 Power supply cable 5x4mm² 3m19 40.01.086 Fixing device f. cable guide20 1106.0160 Hex nut M621 1206.0120 Tooth lock washer A6,422 2020.0400 Fixing device for cable harness23 4004.0103 Wire end sleeve 4,0 mm²24 40.00.471 Bus cable 0.8m25 40.00.338 Sicotronic-terminal *screw typ*29 40.01.776 Sicotronic-terminal *crimp type*2 Electrical installation Voltage3 NAC 400V 50-60HzItem no. Part no Reference Description1 40.01.329 Dry up protector 160°2 3014.0302 Hex nut M10 for dry-up protector3 40.01.482 Safety temperature limiter 365°C4 3014.0327 Hex nut M10x1,05 40.01.555 Contactor CL02A310T6-M6 3101.1008 Cooling fan7 10.00.238 Screw Torx 4x508 40.00.277 Control transformer9 40.00.465 Electronic noice filter10 4001.0224 Fuse 6.35x32mm11 4001.1295 Fuse holder e 1003Si/1DS12 10.00.240 Screw Torx 3x2013 4001.1210 Earth terminal 16mm² yellow/green14 4001.1250 Terminal block 16mm² blue15 4001.1202 Terminal block 16mm² grey16 2005.0106 Protective grid for cooling fan17 40.00.518 Installation rail for Contactor 95mm18 10.00.239 EJOT PT-Screw Torx 4x1019 10.00.111 Cable clip long20 40.00.209 Cable buzzer20 40.00.202 Cable CDS sensor20 40.00.232 Cable contactor-SSR20 40.01.297 Cable control harness20 40.00.201 Cable control SSR20 40.00.213 Cable control transformer sec.20 40.00.210 Cable control transformer sec.20 40.00.207 Cable differencial pressure switch 20 40.00.208 Cable humidity control20 40.00.205 Cable level electrode20 40.00.204 Cable SC pump2 Electrical installation Voltage3 NAC 400V 50-60Hz Item no. Part no Reference Description20 40.00.203 Cable solenoid valveElectrical unit X 2.B Cable entry 22 Electrical installation Voltage3 NAC 400V 50-60HzItem no. Part no Reference Description1 40.00.391 Cable bushing f. cable entry2 10.00.115 Allen screw M5x303 1305.0160 Washer A5,3x10mm4 40.00.307 Cable entry5 40.00.312 Clamp strap f. cable entryElectrical unit X 3 Clima Plus 33 Clima Plus Voltage 3 NAC 400V 50-60HzItem no. Part no Reference DescriptionA 22.00.234 X3.A Hose set f. humidity control1 22.00.199 Inner humidity meas. Piece2 22.00.318 Humidity control cpl. with motor3 22.00.200 Outer humidity meas. Piece4 22.00.198 Gasket f. hum. meas. Pipe5 22.00.214 Hose d50x2025 22.00.213 Hose d50x2106 2066.0531 Hose clamp ø567 2001.0124 Compression spring8 22.00.326 Mounting device f. pressure sensor9 3017.1011 Pressure sensor for humidity control Huba 40110 10.00.239 EJOT PT-Screw Torx 4x1011 3101.1010 Humidity control motor12 3016.0102 Micro switch13 3101.1021 Protecting cap f.12VDC humidity motorElectrical unit X 3.A Hose set f. humidity control 33 Clima Plus Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 4005.0101 Tie rap 145 mm2 2110.1020 Silicon hose ø5x1.5 blue3 2110.1019 Silicone hose ø5x1,5 "red"4 1900.0203 Ceramic tube 8x5x60mm for5 2112.1338 Silicone hose ø8x2x20Electrical unit X 4 Steam generator, Bypass 44 Steam generator, Bypass Voltage 3 NAC 400V 50-60HzItem no. Part no Reference DescriptionA 8354.1320 X4.A Pump connection spout cpl.B 8354.1304 X4.B Venting valve for steam generator1 3002.0402 Filling level electrode 90 mm2 44.00.171 Steam generator insolated3 1106.0803 Hex combination nut M6 galv4 44.00.194 Heating element5 44.00.280 Gasket f. heating element+Level elektrode insert6 2066.0519 Hose clamp 35,6mm7 2066.0526 Hose clamp ø46mm8 44.00.207 Emptying pump9 1006.0762 Hex screw M6x1010 1306.0222 Washer A6,4x15x1,511 44.00.232 Fixing device f. pump steam generator12 44.00.241 Drain hose steam generator13 2066.0518 Hose clamp 30mm14 40.00.291 Thermocouple steam generator15 1104.0122 Hex combination nut M4 galv16 2112.1006 Steam hose 50x7mm17 2066.0504 Hose clamp 40-60mm18 2066.0506 Hose clamp 20-32mm19 1105.0120 Hex nut M520 1205.0120 Tooth lock washer A5,321 2920.1300 Level elektrode insert22 44.00.534 Heating element w/o pipe23 10.00.414 Cable strap black 120°Electrical unit X 4.A Pump connection spout cpl. 44 Steam generator, Bypass Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 2118.1000 Pump connection spout2 2120.1259 Stop plug 10mm3 2066.0527 Hose clamp ø14mm4 2066.0530 Hose clamp ø16.4mm5 2062.0331 Junction pressure hose GS 106 4005.0101 Tie rap 145 mmElectrical unit X 4.B Venting valve for steam generator 44 Steam generator, Bypass Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 2062.0332 Receptacle for ventilation valve SG2 2069.0108 Ventilation valve3 2112.1310 Form hose for ventilation of steam generator4 2066.0506 Hose clamp 20-32mmElectrical unit X 5 Hot air heating 55 Hot air heating Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 40.00.305 Mating flange f. heating assembly2 40.00.265 Heating assembly3 10.00.109 Hex screw M5x234 1106.0360 Cap nut M6, high shape5 1306.0222 Washer A6,4x15x1,56 40.00.332 Gasket f. heating assemblyElectrical unit X 6 Motor and fan wheel 66 Motor and fan wheel Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 2120.1306 Spacer SW19x172 22.00.123 Flange f. motor shaft gasket3 22.00.120 Mounting support f. gasket flange4 22.00.083 Motor shaft gasket5 1315.0101 Copper washer 6x106 1106.0220 Hex nut M6 flat7 22.00.188 Fan wheel d340x1108 1008.0763 Hex screw M8x208 10.00.565 Hex screw M8x209 40.00.310 Exhaust pipe below10 40.00.435 Exhaust channel f. SSR11 40.00.274 Fan motor12 10.00.071 Hex nut M812 1108.0260 Hex nut M812 10.00.710 Hex nut M8 w. locking13 1208.0260 Spring washer B814 1008.1005 Square necked mushroom head bolt 8x407 Interior cabinet Voltage 3 NAC 400V 50-60HzItem no. Part no Reference DescriptionA X7.A Interior cabinetB 40.00.091 X7.B Gasket frame w. glass a. gasketsC 22.00.295 X7.C Air baffleC 22.00.381 X7.C Air baffle1 40.00.520 Screen interior cabinet sensor3 3024.0201 Halogen bulb for interior cabinet 300°C4 40.00.211 Wiring interior light5 20.00.396 Door gasket6 40.01.604 Meat probe sensor SCC 1016 40.00.294 Meat probe sensor SCC 627 1315.0104 Copper washer 16x20x1,58 10.00.422 Hex nut M169 3014.0162 Sealing cone for thermocouple10 3014.0163 Gasket sleeve with nipple11 40.00.395 Thermocouple interior cabinet12 2005.0308 Outlet sieve13 50.00.395 Nozzle f. moistening14 10.00.070 Hex nut M615 50.00.394 Union nut M12x127 Interior cabinet Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 40.00.290 Thermocouple humidity2 40.00.098 Reflector f. interior light3 4001.1248 Porcelain connector 2-pin interior light4 1330.0100 Clamp strap f. sensor5 1106.0224 Hex nut M6 self locking6 1306.0120 Washer A6,47 1104.0120 Hex nut M48 1204.0120 Tooth lock washer A4,39 2120.1277 Base for sensor connection10 1603.0167 Tubular rivet 3,2x0.25x1011 10.00.041 Rivet nut M5 hexagon closedElectrical unit X 7.B Gasket frame w. glass a. gaskets 77 Interior cabinet Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 40.00.093 Outer gasket f. interior light2 40.00.094 Inner gasket f. interior light3 40.00.095 Glass pane f. interior light4 40.00.096 Gasket frame f. interior light5 10.00.682 Phillips countersunk-head screw M5x167 Interior cabinet Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 1304.0160 Washer A4,32 1604.0167 Rivet 4x103 22.00.332 Air sucking ring f. air baffle4 2760.1370 Latch hook for air baffle5 40.01.289 Fixing clip core temp. cable6 10.00.515 Rivet 3,2x5 A46 1603.0168 Rivet 3,2x8 A46 1603.0168 Rivet 3,2x8 A47 Interior cabinet Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 1304.0160 Washer A4,32 1604.0167 Rivet 4x103 22.00.332 Air sucking ring f. air baffle4 2760.1370 Latch hook for air baffle5 40.01.289 Fixing clip core temp. cable6 10.00.515 Rivet 3,2x5 A46 1603.0168 Rivet 3,2x8 A47 22.00.361 Deep-draw f. air baffle8 Door Voltage 3 NAC 400V 50-60HzItem no. Part no Reference DescriptionA 24.00.093 X8.A Door1 24.01.100 Spring clip f. door lock2 1005.2000 Interlocking tooth screw M5x83 24.00.152 Door handle4 24.00.176 Door lock5 24.00.504 Lock cover6 24.00.133 Door mounting support top7 1008.0768 Ornamental screw M8x168 1308.0160 Washer A8,49 24.00.223 Door mounting support bottom10 1006.1962 Countersunk screw Torx M6x1611 10.00.090 Cap f. Torx T3012 1006.0760 Hex screw M6x1613 1106.0802 Cage nut M614 24.00.137 Door bolt15 10.00.099 Hex screw M8x1216 24.00.048 Door bolt17 1008.0769 Ornamental screw M8x3018 2001.0109 Compression spring19 24.00.141 Holding bracket f. door catch20 1306.0120 Washer A6,421 24.00.142 Door catch22 1308.0162 Washer A8,423 24.01.200 Pan head screw Torx M4x12 T2024 24.01.199 Slotted pan head screw M6x45 *WDS*8 Door Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 24.00.164 Inner glass pane2 24.00.147 Sleeve for door bolt top3 24.00.146 Door setting bolt4 24.00.502 Fixing device f. magnet with magnetElectrical unit X 9 Water supply, quenching box 99 Water supply, quenchingVoltage 3 NAC 400V 50-60HzboxItem no. Part no Reference Description1 54.00.222 Exhaust pipe2 54.00.086 Rubber form piece venting pipe3 40.00.287 Thermocouple quenching4 50.00.138 Double solenoid valve5 50.00.139 Single solenoid valve6 50.00.070 Water distribution hor roll guide con.7 50.00.071 Water distribution hor. w/o roll guide con.8 50.00.086 Locking plate f. water distribution9 50.00.078 Non return valve DW16/DN1210 1900.0202 Water filter11 2066.0205 Hose clamp 8-16x9 mm SW 7mm12 8664.1301 T-fitting water connection13 5110.1024 Gasket for G3/4" threaded joint14 50.00.085 Plug-in spring f. hand shower roll guide15 54.00.357 Ball valve drain SCC cpl.16 10.00.511 O-ring for ball valve drain 46x3.517 10.00.512 O-ring for ball valve drain 26x3.518 5003.0300 Insulation, melamin resin foam19 54.00.228 Inspection lid f. quenching chamber20 5012.0566 Gasket quenching chamber 0-ring21 54.00.225 Clamping bar22 2016.0940 Quenching nozzle rear double sprey23 2067.0050 Pressure hose d10mm24 44.00.211 Water volume sensor24 44.00.670 Water volume sensor with wire25 2112.1346 Protecting hose ø28x2x70mm27 44.00.592 Brass fitting G3/8-NW1028 44.00.593 Gasket f. water volume sensor G3/829 2120.1277 Base for sensor connection10 Hand shower Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 50.00.140 Hand shower roll guide2 50.00.172 Connect. pipe f. hand shower roll guide3 50.00.130 Hand shower4 50.00.156 Clamp f. hand shower roll guide5 1107.0100 Star lock ø46 50.00.279 Tulip for handshower7 50.00.298 Tape f. tulip8 50.00.537 Gasket f. connect.pipe hand shower roll guide9 50.00.538 O-ring f. connect. pipe f. hand shower roll guide11 CleanJet Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 12.00.319 Housing f. Cleaning pump2 56.00.166 Pressure hose f. cleaning3 2066.0521 Hose clamp 27mm4 56.00.188 Suction hose f. cleaning5 56.00.153 Pump f. cleaning UP3013 Exterior cabinet Voltage 3 NAC 400V 50-60HzItem no. Part no Reference DescriptionA X13.A Exterior cabinet1 22.00.354 Spacer ring1 8450.1310 Spacer ring2 22.00.353 Vent cover2 8455.1209 Vent cover3 1110.0800 Cage nut M104 2022.0101 Grommet 18 mm5 1106.0802 Cage nut M66 12.00.205 Upper part of pedestal7 12.00.206 Lower part of pedestal8 1328.0102 Safety washer A10,29 10.00.107 Allen screw M10x3014 16.01.146 Bracket for door contact switch13 Exterior cabinet Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 16.00.163 Top cover2 1003.2265 Countersunk self tapping screw 4,2x163 1104.0820 Snap nut 4,2mm4 16.00.127 Side panel right5 1603.0166 Rivet 3,2x7,9 CNS closed6 16.00.128 Side panel left7 10.00.102 Hex self tapping screw B4,2x328 16.00.137 Back panel9 16.00.290 Front panel10 2002.0107 Tension spring for front panel11 16.00.673 Air inlet filter12 2039.0331 Cap for service door13 16.00.180 Crossbar top14 5105.1027 Gasket f. exhaust pipe d=54mm15 16.00.329 Cover f. USB interface16 10.00.103 EJOT PT-screw KA 3.5x1017 16.00.338 Edge protection profile18 10.00.460 EJOT PT-Screw Torx 3,5x1419 1004.2160 Hex self tapping screw 4,2x1620 16.00.325 Crossbar below21 40.00.335 Door switch22 40.00.469 Interface cable USB 0.9m23 50.00.296 Clip f. drip collector24 50.00.286 Drip collector25 50.00.303 Bushing drip collector26 50.00.556 Drain drip collector26 50.00.299 Drain drip collector27 16.00.384 Bracket for door contact switchElectrical unit X 14 Miscellaneous 1414 Miscellaneous Voltage 3 NAC 400V 50-60HzItem no. Part no Reference Description1 60.11.023 Hinging rack left2 60.11.024 Hinging rack right3 10.00.448 Phillips countersunk-head screw M5x164 1008.0750 Hex screw M5x165 1004.0666 Hex screw M4x106 10.00.565 Hex screw M8x207 1208.0160 Tooth lock washer A8,411 5003.0300 Insulation, melamin resin foam12 5006.0500 Polyurethan-Glue for insulation 310ml17 42.00.029 USB-Memory-Stick19 1105.0123 Hex combination nut M422 4019.0008 Sticker Electric/Danger24 60.60.574 Positioning support f. core sensor。

注意：1. 未经三洋书面许可，不得以任何形式复制本手册的任何部分。

2. 本手册的内容如有变更，恕不另行通知。

3. 本手册如有任何不清楚之处或任何错误、遗漏之处，请与三洋联系。

SANYO Electric Co.,Ltd.版权所有日本付印目录安全操作预防措施P. 2使用注意事项P. 7设备上的标识P. 9部件组成P. 10 控制面板和键盘P. 12 远距离报警端子P. 14 安装安装地点P. 15 预防污染P. 16 安装P. 16 运行前准备箱体和附件灭菌P. 17 连接N2(或者O2)气瓶P. 18连接进气喷口P. 19连接CO2气瓶P. 20启动设备启动程序P. 21独立内门P. 21操作规程控制面板键盘操作P. 22紫外灯P. 23更改紫外灯开启时间设置P. 24气瓶自动转换P. 25键锁定功能P. 27水位传感器P. 28报警与安全功能P. 29报警自动恢复时间设置P. 31日常维护和保养箱体和附件灭菌P. 32拆卸附件P. 33增湿盘注水P. 35校准温度校准P. 36CO2校准P. 36O2校准P. 37故障排除P. 38环境条件P. 39培养箱报废处置P. 39堆叠放置组件P. 40规格P. 42性能P. 43安全检查单P. 44安全操作预防措施本手册包括有重要的安全规定，请用户务必遵照执行。

这里所介绍的事项和规程旨在使你能正确安全地使用本设备。

如果遵照执行此处所述的预防措施，则将使用户和任何其他人免于可能发生的伤害。

“警告”和“注意”示意如下:以下为标识的含义：该标识指注意。

该标识指禁止。

该标识指务必遵守的规定。

务必将本手册保存在本设备用户方便取用的地方。

< 设备上的标识 >此标识被标注于高压电的电器罩盖上，用来防止触电意外的发生。

只有合格的工程技术人员或维修服务人员才能取下此电器罩盖。

安全操作预防措施本设备不得安放在室外使用。

如果本设备被雨水淋湿，则可能会引起漏电和触电。

35-3/64 (Ceili ng pa n el dime ns io ns)35-3/64 (Ceili ng pa n el dime ns io ns) 74-1/64 (Ceili ng pa n el dime ns io ns)31-7/64 (I ns tallatio n hole pitch)31-7/64 (I ns tallatio n hole pitch)70-5/64 (I ns tallatio n hole pitch)7-7/83-15/16Top view 35-3/64(Ceilingpaneldimensions)36-7/32(Installationholepitch)37-13/32(Maximumdimensions) Unit: in.Fig. 2-7Air-i n take g rilleCeili ng pa n elAir-i n take g rille hi ng e11Ceili ng s ideMai n un itCeili ng ope n i ng dime ns io nAFig. 3-13FlapFig. 3-14S crew2Fig. 3-17Cor n er coverCeili ng pa n elS trapP us h1Cor n er coverFig. 3-18Fig. 3-1628S q u are hole i n un itTemporary fa s te n erus h whe n yo u removeTemporary fa s te n erFig. 3-20-1Do n ot allowg ap Ceili ng pa n elMai n un itCeili ng su rface I ns ert a wre or other tool i the cor i ns tallatio a n d make fi adj us the un Fig. 3-22Air leaka g eAir leaka g e from ceili ng su rfaceS tai n i ngCo n de ns atio n , water leaka g eAdj us t s o that there are n o g ap s .to tighten the screws securely.adjust the height of the unit again.unit levelness, the drain hose, or other elements.Fig. 3-23(Directio n that the un it face s ha s bee n cha ng ed to facilitate expla n atio n .)Ceili ng pa n el wiri ng co nn ectorCeili ng pa n el s ideS crew s(3 locatio ns )Mai ns s ideClampElectrical compo n e n t box cover* Pa ss the wiri ng co nn ector thro ug h the clamp to fa s te n it i n place, a s s how n i n the fi gu re.Place the cor n er cover s o that the 3 tab s fit i n to the hole s i n the ceili ng pa n el.The n fa s te n it i n place with the su pplied s crew s .Pi nFig. 3-24Fig. 3-25Hole for ceili ng pa n el hookHook that preve n t s the g rille from droppi ngFig. 3-26n e n t boxU n it drai n ho s e s ide U n it refri g era n t t u be s ideOptio n al wirele ss receiver kit * Ca n o n ly be i ns talled i n thi s po s itio n .Ca n be i ns talled rotated 90˚rille catche s at talled with the s ey of 4 directio ns .Fig. 3-27Fig. 3-343-5/32For fre s h air i n take (ø3-15/16 hole)6-11/16AFig. 3-35For fre s h air i n take (ø3-15/16 hole)6-11/16A8-1/16Sus pe ns io n bolt。

Electronics R elated Products GuideAs the need for automation and labor saving increases, the number of small motors, which are key to theirimplementation, is also expected to increase. For the cases that requires high reliability, such as for robots, we can make proposals that are optimized for the operating environment.Electronics SectorDC Motor & Induction MotorMotors consume 50% of the world’s electricity and increased miniaturization, rotation speed, and e ciency are progressing in response to demand for further increases in functionality. With these changes, the adhesives used require heat resistance and high strength.Electronics SectorBrushless-DC MotorSmart phones that are now essential goods for daily living are composed of alot of electronic components and modules and lots of glue.Attachment of a cover panel to a display panel with a UV-curable sheet-likeadhesive enables a screen to be easily watched, and use of a low-temperaturecurable/UV-curable sealant for a case can produce “waterproof and drip-proof”devices.In addition, ThreeBond's sealants and adhesives contribute to making smart phonesand their electronic components and modules thinner and more sophisticated. Electronics SectorSmartphoneby little due to downsizing.ThreeBond's sealants and adhesives can meet all needs.adhesives that cure fast at low temperature are needed to shorten theA lot of adhesives are used for the mechanical components of cameras including a single lens re ex camera. As the design of a camera has been smaller and thinner, UV-LED light source-curable adhesives are needed in order to bond a di erent type of material to another, to reduce the amount of heat applied to materials, and to reduce power consumption in camera manufacturing processes.ThreeBond develops and manufactures adhesives that are the most appropriate to a customer's manufacturing processes and provide such products on a global basis.Electronics SectorDigital CameraDigital CameraPentaprismGlass and resin lensStrobeAF sensorApplication Pentaprism xing Product ThreeBond 3030 SeriesCure conditionUV curingCharacteristics1. High adhesion to resin materials (PC, PPS, etc.)2. Flexible3. Adhesion to di erent materials Application Bonding of lenses Product ThreeBond 3017 Series ThreeBond 3020BCure conditionUV curingCharacteristics1. High strength of adhesion to materials di cult to bond (ole n-based)2. Good surface curability3. Less distortion (TB 3017 Series)Application AF sensor xing Product ThreeBond 1535 Series ThreeBond 3017 SeriesCure conditionMoisture curing / UV curingCharacteristics1. Good impact resistance2. Adhesion to di erent materials3. Shadow-zone curing possible (TB 1535 Series)Application Strobe periphery xing Product ThreeBond 1535 Series ThreeBond 3164DCure conditionMoisture curing / UV curingCharacteristics1. Good impact resistance2. Adhesion to di erent materials3. Shadow-zone curing possible Image sensorApplication Image sensor xing Product ThreeBond 3036 Series ThreeBond 3114 SeriesCure condition UV curing Characteristics1. Low cure shrinkage2. Low linear expansion coe cient3. High adhesive strength Case / Lens mountApplication Waterproof / Dustproof Product ThreeBond 3081 Series ThreeBond 3166Cure condition* CIPG (Cured In Place Gasket)UV curing (CIPG)Characteristics1. Low compression permanent distortion2. Flexibility3. Reworkable Application Heat dissipation Product ThreeBond 1225 Series ThreeBond 2955 SeriesCure conditionMoisture curingCharacteristics1. High thermal conductivity (1.59 to 4.8W/m•K)2. Low outgassing (TB 2955 Series)3. Low molecular weight cyclic siloxane reduced product Image stabilizer unitApplication Vibration absorption Product ThreeBond 3168ECure conditionUV curingCharacteristics1. High and low temperature resistance2. Soft gel3. Vibration absorbability * ThreeBond is abbreviated to TB.In recent years, increasing awareness of global security has been accompanied by spreading adoption of surveillance cameras as a deterrent to crime and terrorism.For many years, our UV-curable resin has contributed to security cameras, mainly to the adhesive application for optical parts.Increasing numbers of pixels in recent years have brought an increasing need for “thermal conductivity” as protection against overheating, and for “Sealants” as waterproo ng and protection from insects.Electronics SectorSurveillance Cameraconferences as telework becomes more prevalent, so production levels areincreasing signi cantly. Furthermore, as earphones become more expensive,consumers expect them to last longer, so adhesives must improve productivitythrough “fast curing” and high reliability with a focus on “impact resistance”.Wireless Earphone As automation advances as a substitute for the ve senses of humanbeings, adoption of these devices is expected to further increase. AtThreeBond, we propose the optimal products for sensors and MEMSdevices that require high reliability.Sensor / MEMS DeviceStations for 5G communication are starting to be set up everywhere, evenoutdoors, so adhesives must be incredibly reliable to ensure operationcontinues despite weather conditions. Our lineup includes case sealants,thermally conductive materials used to protect electronic substrates fromheat and more.Electronics Sector5G Base Station The spread of 5G communications has greatly increased the amountof data ying around the world. As for optical transceivers needed forhigh-speed communications, we have a wide range of products,mainly UV resins and heat-conducting materials for parts requiringprecision xation.Electronics SectorOptical TransceiverViscosity comparison[Cyanoacrylate Adhesives]Viscosity comparison[UV Curing Resins]Viscosity comparison[Epoxy resin] Electronics SectorProduct map by viscosity / hardnessWatch our video to see viscosity imagesElectronics SectorAdhesive selection table by materialApplication Equipmentas the equipment to apply and pressure feed them to maximize their performance.As a manufacturer with full knowledge of sealants and adhesives, ThreeBond enables to reduce cost and improve developing such equipment.To provide further added value for customers, ThreeBond has been making e orts to develop and sell the equipment that incorporates new application and pressure feeding technologies.Tank for 250g/1kg bottle or can (TG1-T)Dispense valve (HPNV-50)Pressure feed controller (coater S4)Small capacity precision type ofManual application cartridge pump (ACB-20)Pump for pails (PBIII)+Constant-velocity discharge head ( xed-quantity booster)Air gun for sealant- Lineup of products for improvement of productivity and workability - The RTM and RTM-H Series enable products that meet customer requirements to be designed and manufactured.- A lineup of devices that can handle small-amount and large-amount sealants and adhesives is available.- They are suitable for the bead application of solvent-volatilization-type and moisture-curable-type liquid gaskets.- Dispensers that can apply a xed quantity of a sealant and an adhesive without waste are available.- A unit that can reduce the amount of a remaining liquid agent in a pail is available as an option. (Some conditions must be met.)* ACB...Automatic Cartridge Booster * PCB...Power Cartridge Booster * RTM...Rotary Transfer Motor* RTA-H...Rotary Transfer Air-motor by HandApplicationTB1100, TB1300 seriesSingle-component xed-quantity booster ( xed-quantity booster) Application Equipment Sector- Lineup of products for improvement of productivity and workability - Applicators suitable to a wide range of adhesives, such as solvent-volatilization type, moisture-curable type, and aqueous pressure-sensitive type, can be selected.- Application of an instantaneous adhesive that is di cult to handle is automated, which enables a work environmentand application quality to be improved.* LVCT-AC...Low Viscosity Cartridge Tank - Automatic Connection * HPNV-50...Pressure Needle Valve - Type 50* DPB-40...Diaphragm Power Booster* TDV...Triple Diaphragm ValveApplicationTB1500 seriesCartridge-type tank (TC2)Dispensing valve (HPNV-50)Controller for pressure (coater S4)Desktop robot (RT7 Series) Application Equipment Sector- Lineup of products for improvement of productivity and workability - Applicators are available for each of the single-component type and the two-component type.- The two-component type can be set, according to a mixing ratio.* CIPG...Cured in Place GasketSingle-acting pump for pails (PBIII-45)This is a high-pressure feeding pump for automatic application. When it isApplication Equipment Sector- UV-curing type, anaerobic-curing type, and moisture-curing type Applicators for each of the above types are available.- Auxiliary equipment needed for the process from application to curing is available.- Equipment suitable for CIPG application (design of a special-purpose machine)Cartridge-type tank (TC2)Dispensing valve (HPNV-50)Controller for pressure (coater S4)Desktop robot (RT7 Series)Application Equipment SectorAK2022035 22 • 11 • SK。

FILE NO. PAC-0491N O T I C EPLEASE ADD THIS NOTICE TO THE MANUALS LISTED BELOW. CATEGORY : Air Conditioner DATE : November.2006 MODEL: DHX4852REF.No. : PL 833826 DESTINATION : USA ISSUE No.: 1THE REASON OF CHANGE.. A : MisprintB : Quality ReliabilityC : StandardizationD : Design ChangeE : Addition of Missing PartsF : Parts CompatibilityParts ListAir Conditioner INDOOR UNITD HX4852Made in JapanR EFERENCE No.PL 833826-01DHX4852KeyNo.Part No.Description Q'ty Reference No.* 1 623 176 0355 Heat Exch Ass'y 1 854-0-4124-369002 623 175 2213 Strainer Ass'y 2 854-0-4522-29100 * 3 623 175 2206 Magnetic Coil(PMV) UKV-U030E 1 1FA-4-L8A0-30500 *4 623 174 1293 Thermistor Ass'y(TA) KTEC-35-S85 1 854-0-5259-45700 * 5 623 170 1778 Thermistor Ass'y(E3) PBC-41E-S42-2 1 854-0-5259-424006 623 116 7338 Spacer SPLSN-8 4 851-2-5366-05300 *7 623 170 1761 Thermistor Ass'y(E1) PBC-41E-S36 1 854-0-5259-39100 *8 623 177 7124 Terminal Base HP-T3041-C3E4-S 1 1FA-4-J3A0-23900 *9 638 010 7827 Fuse BET6.3A 1 1FJ-4-S3A0-00600 * 10 623 068 3402 Centrifugal Fan Ass'y 1 854-0-2501-1520011 623 079 9912 Cushion Rubber 2 854-2-2534-1320012 623 108 8008 Guide, Drain Pan 1 854-2-2341-21101 * 13 623 201 6598 Fan Motor Ass'y KFC4Q-401A6P 1 8FA-0-5202-04000 * 14 638 008 8249 Fixed Capacitor UPMDD-440V/7.0MF 2 4-2239-5616715 623 201 6581 Elec. Wiring Diagram 1 8FA-2-5250-06000 * 16 623 311 8130 Controller Ass'y CR-UHX0762 1 854-9-9536-0571017 623 110 8744 Mounting Plate, Evaporator 1 854-2-2303-2540118 623 000 0865 Eyelet 1 3-9041-11000* 19 623 201 6475 Transformer Ass'y ATR-IL224B-T-R 1 8FA-0-5263-0620020 623 105 8971 Mounting Plate, Evaporator 1 854-2-2303-19201 * 21 623 176 0256 Solenoid Control Valve UKV-30D33 1 854-2-4548-20400 * 22 623 193 2974 Power Relay LY2F 4 1FA-4-S2A0-21400 * 23 638 011 8755 Switch Ass'y FS-3502-204 1 854-0-5257-0340024 638 012 1120 Mounting Plate 1 854-2-5312-9420125 623 078 4994 Mounting Plate 1 854-2-2360-1181126 623 111 1928 Mounting Plate 2 854-2-2518-2950127 623 158 8201 Reinforcement 2 854-2-2345-5770128 623 076 9137 Mounting Plate, Elec Box 1 854-2-2234-1470029 623 077 0355 Mounting Plate, Evaporator 1 854-2-2303-1840130 623 201 6499 Packing 1 854-2-2336-38210 * 31 638 010 7834 Fuse Holder F-400-01-B2 1 1FJ-4-J2A0-0030032 623 108 8022 Fan Casing Ass'y 1 854-0-2502-1910133 623 108 8015 Support Motor Ass'y 3 854-0-2511-1580134 623 108 8039 Nozzle 2 854-2-2519-1180135 638 011 8847 Mounting Plate 1 854-2-2361-2630136 638 002 7729 Mounting Panel 2 854-2-1127-1730137 623 105 8797 Cover,ponent Box 1 854-2-5304-3350038 623 054 8497 Mounting Thermostat 1 852-2-5303-1280039 638 008 4913 Spacer SPSN-8 1 851-2-5366-0630040 623 105 0302 Insulation 2 854-2-2403-55800 NOTE:Metal and plastic parts will be supplied basicallywith necessary heat insulation pads or packing.Each key number with an asterisk (*) means therecommended service parts.KeyNo.Part No.Description Q'ty Reference No.41 623 201 6543 Insulation Special 1 854-2-2410-8721042 623 086 9479 Sheet Earth 1 858-2-1323-1010043 623 182 0547 Clamper Lead Wire 1 802-2-5319-1080044 623 201 6529 Elec Component Box Ass'y 1 854-0-5311-0810145 623 105 2733 Mounting Plate 1 854-2-5312-6510146 623 201 6512 Packing 1 854-2-2336-3901047 623 111 0204 Mounting Plate 1 854-2-2360-7610148 623 119 5058 Screw Special 13 854-2-1356-1380149 623 016 2938 Eyelet 1 733-2-4425-1220050 623 105 2726 Mounting Plate 1 854-2-5312-6500151 638 011 8830 Mounting Plate Ass'y 1 854-2-2360-760H152 638 011 8823 Mounting Plate Ass'y 1 854-2-2360-759H1* 53 623 175 2190 Thermistor Ass'y(BL) KTEC-35-S85 1 854-0-5259-4580054 623 201 6482 Flange Ass'y, Duct 1 854-0-2306-260H355 623 201 6611 Cabinet Ass'y 1 854-0-1104-162H256 623 201 6604 Side Panel Ass'y 1 854-0-1102-304H557 623 201 6635 Front Panel Ass'y 1 854-2-1101-606H6* 58 623 201 6628 Drain Pan Ass'y 1 854-0-2301-451H459 623 201 6505 Flange Ass'y, Duct 1 854-0-2306-211H560 623 038 3425 Bushing OCB-875 1 851-2-5370-00900* 61 423 033 1606 Fuse ET 5A 1 F31S5R0A2SCTR 623 201 1050 Operation Manual 1 854-6-4189-83700 NOTE:Metal and plastic parts will be supplied basicallywith necessary heat insulation pads or packing.Each key number with an asterisk (*) means therecommended service parts.For Parts or Service Assistance please contact your local Sanyo HVAC Contractor or DistributorUnited States: SCS, HVAC Solutions Canada: Sanyo Canada Inc.Web: Web: Parts:********************.comParts/Service:**************.comService:**********************.comJan / '10 Printed in Japan。

Your SANYO product is designed and manufacturedSet the picture settings for your “personal”preference.automatically.602button to enter the sub menu as follows., press the 1or 2button to enter.Menu Setupis used to select the preferred language. Use the :M[WT]\QWV @/)PC Power SaveOnCurrent Weekday Current Time Schedule Weekday Time ActionOn Program ActiveFriday 12:171Friday 12:03Power Off AV37Vused to automatically detect incoming signal, andH_SetsV_Setsis used to divide the horizonal picture into more than one12Using this function, you can enjoy a DVI or Network program and an image (AV1, AV2,AV3or PC input) at the same time.Press the ON/OFF button on the Remote Control repeatly to select PIP1, PIP2,POP or OFF mode.During the PIP/POP mode, press the Main/Sub Picture Swap but-ton will switch the location for main and sub picture.i Only the sound on the main picture is heard from the monitor speaker. The sound on the sub-picture cannot be heard.i The details for PIP/POP operation (eg,location for sub picture or input source for any picture,etc.), please refer to page 9.The left picture is main picture, the right picture is sub picture.PIP/POP OperationI PIP1 mode I PIP2 modeI OFF modeI POP mode13Teletext is only available via external sources.Teletext mode can be operated by the following buttons on the Remote Control.i Some buttons have dual functionsOPERA TION (IN TEXT MODE)GBGBTeletext OperationText RevealPress Text Reveal button to reveal hidden items on the text page.Some pages such as quiz pages have the answers hidden. The button may have to be held to keep the answer on the screen, or press again to remove the answer.In Reveal OFF, this indication is not given.Text Reveal button will only work whilst in text mode.Page Up and DownTo select the next or previous page.Text SubcodePress this button, “110/. . . .” will be displayed (e.g. the current page is 110).And press the NUMERIC buttons(0-9) to enter the sub page. For example, to select sub page 4, press NUMERIC buttons 0-0-0-4, and "110/0004" will be displayed.When finished, press the text subcode button to return to normal operation.Text IndexPress this button to select one of the teletext index pages in TEXT, MIX or CANCEL mode.Volume Up/DownTo adjust the sound volume level.Text RedUse to select the red topic or page number at the bottom of the text page.Text CancelPress the TEXT CANCEL button in TEXT or MIX mode, the TV picture appears on the screen.Press this button once again or press TXT/TV button, CANCEL mode will be cancelled.In CANCEL mode, "CAN" is always displayed on the upper left of the screen.TXT/TVPress TXT/TV button to select teletext. Press again will display: AV mode: AV/ TEXT mode/ MIX mode/ AV Note:MIX mode: AV (broadcast image) screen and the contents of TEXT (superimposed) are displayed simultaneously.CANCEL mode: TEXT/MIX MODE is cancelled temporarily and AV image is displayed.If the signal is removed or disconnected, the monitor will revert to a blue back-ground with “No signal” message on the screen.If the TXT/TV button is pressed during the CANCEL mode, the CANCEL mode will be cancelled, and full text will resume.Text SizePress Text Size button to enlarge the top half of the text page.Press Text Size button again to enlarge the bottom half of the text page.Press Text Size button again to return to the normal size page.(Normal/ top half enlargement/ bottom half enlargement/ normal) Note:During the top half or bottom half enlargement mode, if a page request is performed by [ 0-9 ] numeric buttons or the TEXT INDEX button, it will return to normal mode and a page will be requested.If HOLD ON / OFF is performed during the top half enlargement mode, it will hold the top half enlargement mode. (HOLD symbol will display)If HOLD ON / OFF is performed during the bottom half enlargement mode, it will hold the bottom half enlargement mode. (HOLD symbol will NOT display)Text HoldPress Text Hold button to stop page request and updating. HOLD ON:The Hold symbol will appear instead of the page number.Update of TELETEXT is forbidden. It holds on the current TEXT screen display now.HOLD OFF:The hold symbol is replaced with the page number.TELETEXT page data is updated.The present page is re-requested. (header roll) Text Hold button will only work whilst in TEXT Mode.Text GreenUse to select the green topic or page number at the bottom of the text page.Text YellowUse to select the yellow topic or page number at the bottom of the text page.Text BlueUse to select the blue topic or page number at the bottom of the text page.Part No. 1KA6P1P0423-C N5VV (1)Printed in U.K.。

SAN12(6904-002020 <00>)Sanus Systems2221 Hwy 36 WestSaint Paul, MN 55113 USACustomer ServiceAmericas:800-359-5520•651-484-7988•**************Europe,MiddleEast,andAfrica:+31402324700•************************** Asia Pacific:8675589969226•**********************©2010 Milestone AV Technologies, a Duchossois Group Company.IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCTThe SAN212 is designed to support audio and video accessory equipment; it is NOT designed to support a television.Specifi cations:Shelf capacity - DO NOT EXCEED : 22.6 kg (50 lbs)CAUTION: Avoid potential personal injuries and property damage!Do not use this product for any purpose not explicitly specifi ed by manufacturer.The wall must be capable of supporting fi ve times the weight of the mount and accessories combined. This product is not designed for use in metal stud walls!If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of thisproduct, contact manufacturer Customer Service or call a qualifi ed contractor.Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.Supplied P arts and H ardware.Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!NOTE:Not all hardware included will be used.After unpacking:Remove screw (S) from top locking plate (LP)column [01].Lift locking plate (LP) and remove wall plate[01] x 1[03] x 2[02] x 1[07] x 4[06] x 2[05] x 2[04] x 8[12] x 4[09] x 11/4-20 x 3/8 in.[10] x 4[08] x 11/4 in.[11] x 41Wall MountingWood Stud MountingCAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage: Pilot holes MUST be drilled to a depth of 63.5 mm (2.5 in.), using a 3 mm (1/8 in.) diameter drill bit.DO NOT over-tighten the lag bolts [12].Any material covering the wall must not exceed 16 mm (5/8 in.).Minimum wood stud size: common 2 x 4 in. (nominal 1.5 x 3.5 in.)NOTE: The column [01] can be adjusted on the wall plate [02]to suit your needs.mount the top shelf higher than 99 cm (39 in.) above the fl oor.112343mm (1/8 in.)13mm (1/2 in.)[12][11][02]< 16 mm (5/8 in.)63.5mm 2.5 in.Locate stud. Verify the center of the stud with an awl or thin nail or use an edge to edge stud fi nder.Tighten the lag bolts [12] only until the washers [11] are pulled fi rmly against the wall plate [02].Level the wall plate[02] and mark the hole locations.Drill pilot holes as illustrated.A B4Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or suffi ciency of the information contained in this document.56Slide glass shelves [06] under upper lip of shelf brackets [03]shelf rests [04].[01]。