银都冷柜说明书

冰箱、冰柜、冷柜安全操作规程范本一、前言冰箱、冰柜、冷柜是商业场所以及家庭中常见的储存食品和保鲜食品的设备。

为了确保冰箱、冰柜、冷柜的正常运行以及保障操作人员的安全，制定本安全操作规程范本。

二、冰箱、冰柜、冷柜的基本介绍1. 冰箱：用于在家庭或办公场所储存冷饮、食品等物品的设备，一般使用家用电源供电。

2. 冰柜：用于在商业场所存储和展示冷饮、食品等物品的设备，一般采用商业电源供电。

3. 冷柜：用于在食品企业或超市等地储存大量冷冻食品的设备，一般采用商业电源供电。

三、冰箱、冰柜、冷柜的安全操作规程1. 仅熟悉操作规程的人员可以操控冰箱、冰柜、冷柜，未经许可不得擅自操作。

2. 在操作之前，务必确认电源开关是否关闭，以免触电或造成短路。

3. 不得在冰箱、冰柜、冷柜上堆放过高或超重的物品，以免造成设备倾倒或损坏。

4. 定期检查冰箱、冰柜、冷柜的电线是否磨损或老化，如有异常情况及时更换。

5. 清洁冰箱、冰柜、冷柜时，务必先切断电源，并使用干净的湿布擦拭，不得用水直接冲洗。

6. 不得在冰箱、冰柜、冷柜内插入任何尖锐物品，以免损坏设备或造成电气故障。

7. 冰箱、冰柜、冷柜的进风口和出风口不得被堵塞，以保持设备的正常散热效果。

8. 在使用过程中如发现冰箱、冰柜、冷柜发生异常声响、异味或温度上升等情况，应立即停止使用，并及时通知维修人员。

9. 不得将易燃、易爆物品放置在冰箱、冰柜、冷柜内，以免发生火灾或爆炸。

10. 当冰箱、冰柜、冷柜长时间不使用时，应切断电源，并保持设备内部干燥，防止存储食品受潮。

11. 在冰箱、冰柜、冷柜故障时，不得擅自拆卸或修理，应立即通知维修人员进行检修。

12. 冷库中储存的化学品、药品等有毒物品和易变质食品，要进行安全的标识和储存。

13. 冷库中的货物应按照规定安排摆放，避免阻挡通风口。

14. 冷库温度过高时，要及时检查冷库的维修情况。

四、紧急处理措施1. 如发生冷库着火，应立即报警并按照现场紧急处理措施进行疏散和灭火。

冷库系统操作说明冷库系统操作说明Operation description of cooling chamber 一、目的Purpose为了冷库系统正确及安全的使用，发生错误操作能及时纠正。

For the correctness of cooling chamber system and safety utilization, correctin time the wrong operation二、内容Contents1.主要功能及指标：1）主要功能包括：制冷控制、化霜控制、高低温警告、电流显示、过载保护、缺相保护、相序保护、脱扣保护。

2）主要技术指标：温度显示范围-50~125℃，温度设定范围-45~120℃，分度值为0.1℃。

Major functions and index:1.Major functions include: cooling control, frost meltingcontrol, high/low temperature alarm, current display,overloading protection phase sequence protection, tripping protection2.Major technical index: display range of temperature is-50~125℃ and setting range of temperature is -45~120℃, withdivision value being 0.1℃2.操作指南：Operation guidance1.Indicator lights on the panel means: temperature upper limit,temperature lower limit, frost melting period, frost melting time, waterdripping time, cooling, frost melting and alarm2.How to set temperature upper limit, lower limit, frost melting time,frost melting period and water dripping time: press “set” for 2 secondsto enter setting status. At this time, indicator of “temperature upperlimit” is lightened and temperature upper limit will be shown on displayscreen. Use “?”or “ˇ”to change setting value. Press them for along time, value can be changed continuously. Press “set” again to settemperature lower limit, frost melting period, frost melting time andwater dripping time as per the same method. After they finish, press“set” to quit setting status3.Emergency stop and reset: if emergency stop of cooling chamber isneeded, pres emergency stop button and turn it clockwise. Please resetit after emergency stop1）面板指示灯的含义：温度上限、温度下限、化霜周期、化霜时间、滴水时间、制冷、化霜、报警。

冷藏柜使用操纵规程之五兆芳芳创作
1、冷藏柜内的食品生熟要分隔放置，不该码放过量，以防中间食品腐臭蜕变；不克不及将热的食品直接放入冷藏柜内，应等食品完全冷却后再放入冷藏柜中.
2、放入冷藏柜中的食品不克不及紧靠在蒸发管上，以避免食物与铜管冻在一起；发明食物与铜管冻在一起时，不得使用铁棍或大力拉.
3、冷藏柜使用期间应定期除霜，并设专人办理，保持内部整洁洁净，食品码放整齐有序.
4、冷藏柜除霜或清理冷柜时，应先断电，不得用水冲洗电器部分，以防触电或烧电机.
5、冷藏柜产生毛病，如漏电、声音不正常、不断机、制冷缺乏等现象应实时向厨房东管反应并报请修理，不得自行修理.
6、未经厨房东管同意，厨房冷藏柜不得存放私人食品.。

冰柜使用说明书第一篇：冰柜使用说明书冰柜使用说明书1、冰箱在搬运、放置过程中倾斜角不要超过45度。

长途运输的冷柜应放置2小时后方可通电使用，以防止系统压力过高而损坏。

第一次使用应当先让空柜运行1小时，当箱内温度下降后再放物品。

2、冰箱应选择远离热源、避免阳光直射、通风较好、较干燥的地方放（1）应安放在远离热源，不受阳光直射的地方，因工作时需要与外界进行热交换，既通过冷凝器向外界散热，外界环境温度越高，散热越慢，会使冰箱工作时间越长，增大耗电量，制冷效果差。

（2）应安放在湿度小的地方，由于电冰箱、冰柜外壳，冷凝器和压缩机等均是金属材料，如果空气湿度太大，会使这些部件生锈，缩短电冰箱的使用寿命。

同时潮湿过热环境，会造成电冰箱表面凝露，影响电器性能。

（3）应安放在通风良好的地方，如果电冰箱、冰柜周围堆满杂物，或者靠墙太近，不利于散热会影响制冷效果。

电冰箱背面和两侧面应留有至少10CM的空间，以利散热。

（4）应安放在平坦坚实的地面上，并使压缩机保持水平。

这不仅出于安全的需要，而且可使压缩机平稳工作，减少震动和噪音。

（5）请勿损坏电源线绝缘层，不得重压电线，不得自行随意更改或加长电源线。

（6）检查无误后，电冰箱、冰柜静置半小时，接通电源，仔细听压缩机在启动和运行时的声音是否正常，是否有管路互相碰击的声音，如果噪音过大，检查产品是否摆放平稳，各个管路是否接触，并做相应的调整。

若有较大的异常声音，应立即切断电源，与专业的修理人员联系。

第二篇：冰柜协议书冰柜协议书尊敬的客户：为了“新跃”品牌形象达到展示目的，本厂将_________冰柜，型号___________，押金___________冰柜由廊坊开发区新跃清真肉类加工厂签下此合同。

1、冰柜要求：本厂产品为清真食品，专摆专放，不得用于存放其他厂家产品；2、如果一次发现给予警告或扣除部分押金；3、如果数次发现将取消本合同，收回冰柜，不退将做丢失处理；4、冰柜在投放期间，如因冰柜质量问题损坏由甲方免费维修，人为的由乙方维修，产品化货由乙方承担；5、冰柜在投放期间，不可出售或转投他人；6、冰柜投放地点不可以随意更改，如换其它地方需与甲方重新签订合同；如以上条件没有争议，方签下此合同，本合同签字生效，本合同一式两份，甲、乙双方各执一份。

冷藏柜使用操纵规程之杨若古兰创作
1、冷藏柜内的食品生熟要分开放置，不该码放过多，以防两头食品腐烂蜕变；不克不及将热的食品直接放入冷藏柜内，应等食品完整冷却后再放入冷藏柜中.
2、放入冷藏柜中的食品不克不及紧靠在蒸发管上，以防止食物与铜管冻在一路；发现食物与铜管冻在一路时，不得使用铁棍或大力拉.
3、冷藏柜使用期间应定期除霜，并设专人管理，坚持内部整洁干净，食品码放划一有序.
4、冷藏柜除霜或清理冷柜时，应先断电，不得用水冲洗电器部分，以防触电或烧电机.
5、冷藏柜发生故障，如漏电、声音不正常、不断机、制冷缺乏等景象应及时向厨房主管反映并报请补缀，不得自行补缀.
6、未经厨房主管同意，厨房冷藏柜不得存放私人食品.。

银都伊萨冷冻柜说明书
温度调节：
温度旋钮：
用来调节冰箱内温度，旋钮上的数字不代表具体温度，在相同的室内温度下，数字越大，箱内温度越低；数字越小，箱内温度越高。

0”为停机点，这时冰箱不运转；117”为强冷点，在需要加速制冷的时候使用。

一般冬天宜将旋钮调到”1~4"之间；夏天宜将旋钮调到”4~7”之间。

使用注意事项：
制冰室用来冰冻或储藏食品和制取少量冰块，不得存放玻璃瓶装或灌装密封液体物品，以免由于液体冻结后，体积膨胀而破裂。

冰盒用于制取冰块，注入五分之四容量的凉开水，置于制室，紧贴底部就可以制取冰块，若要加速制冰，应将温度旋钮旋到强制冷点”7"处。

取冰块时，只需扭动冰盒就可以使冰块与冰盒分离。

但切勿折弯冰盒，以免断裂。

制冰时间较长，取冰时不可直接用手握住冰盒，以免冻伤。

接水盒盛接化霜水，务必定时检查接水盘中的化霜水，及时把化霜水倒掉，以免溢落于冰箱内和地板上，造成漏电和生锈。

门封起密封保温作用，使用时要防止油渍弄脏和变形。

物品不宜摆放过密，以利于冷气循环。

热的食品应冷却至室温再放入冰箱。

减少开关们的次数及时间以减少冷气流失。

可以洗涤的食品最好先洗净，擦干水分后贮藏。

若接到停电通知，可提前将2~3小时将温度旋钮旋到强冷点”7”，并尽可能的做制去冰块置于冷藏室内。

停电后尽可能减少开门次数。

若停电时间过长，再次解冻电源前，请把接水盘的化霜水倒掉，并检查是否霜水残积在制冰室和箱内底面上，如有，务必清除掉。

图1 整体结构1、机组2、温控器3、蒸发器4、箱体5、搁档6、工作台7、冷藏门图2 电气原理（1）制冷工作原理制冷系统由图3所示，它由压缩机（1）、冷凝器（2）、储液器（3）、干燥过图3 制冷原理四、主要零部件名称及其功能：2、压缩机反复开启的时间间隔不应小于5分钟，以免发生回液和发泡等造成恶劣影响。

3、应经常清洗冷凝器翅片表面的积灰、油污以提高散热效果。

4、厨工柜如长期不使用，应切断电源，且保持柜内清洁、干燥。

七、产品使用保证：用户在遵守使用和保管的规格前提下，从发货之日起保修12个月。

在此期间凡属制造质量不良引起的零部件损坏，我公司负责免费更换或修理。

凡属下列情况者须核收材料费和检修工时费：1、反操作规程造成的损坏；2、采用不配套的其他零配件；3、安装和使用不符合说明书的要求，如电压缺相、电压值超差或其他自然事故造成的损坏。

图1 整体结构图2 电气原理（2）制冷工作原理：制冷系统由图3所示，它由压缩机、冷凝器、储液器、干燥过滤器、热力膨冷却物体的热量而蒸发汽化，使柜内温度不断下降，物体被冷却。

汽化后的低压过热蒸汽再被压缩机吸入、压缩、排出，如此周而复始不断循环，达到制冷目的。

图3 制冷原理四、主要零部件名称及其功能：1、压缩机：压缩和输送制冷剂蒸汽，是整个制冷系统的心脏部件。

2、冷凝器：将来自压缩机的高温高压气体的制冷剂，经空气强迫冷却后变成高压常温的液态制冷剂。

3、膨胀阀：把高压常温的液态制冷剂降压节流成低压低温制冷剂。

4、温控器：调节柜内所需的温度，及开关动作。

5、吸、排气截止阀：分别与压缩机的吸、排管道相连通，吸气截止阀接通冷凝器，截止阀的多用通道可供连接压力表，制冷系统发生故障时修理人员可凭此分析其原因，并进行修复。

吸气截止阀的多用通道还可供充注制冷剂。

6、温度控制器：调节柜内温度范围及开、关动作。

五、产品使用要求与方法：1、搬运时，应尽量使箱体保持正直，倾斜以60°为限，切忌倒置或横放。

1.幅面为：140X 210mm ；
2.纸质：70g双胶纸。

谢国龙李平芳査淇舰
唐涛
2012.08.242012.08.242012.08.24
2012.08.24
2012.08.24
技 术 要 求
签 名日 期
设 计 审 核标准化审 定
会 签
批 准
冷柜使用说明书
文件编号: 50200105005W 文件名称: 说明书
日 期
签 名
1更改记录
235合肥华凌股份有限公司
胡亚洲版面内容排版更新，2012.09.10切换
谢国龙2012.08.20第四页将冷藏室改为冷藏室（微冻室）；冷藏室使用描述变更。

谢国龙2012.10.15说明书封底客服电话描述更改，2012.11.01切换
谢国龙2012.10.24BCD-221/271VMQ 冷媒注入量由30g 、改为g 、53g ，立即切换
30g 49谢国龙2013.02.274BCD-311VMQ 冷媒注入量由45g 改为63g ，2013.03.15切换谢国龙2013.02.186第四页冷藏室（微冻室）使用描述变更;消化库存后切换。

谢国龙2013.04.247说明书封底删除地址后“176号”及网址“.cn ”，删除非在产型号，产品执行标准更改，库存给予消化。

谢国龙2013.07.198增加型号BCD-201VMQ ，库存可用于BCD-221/271/311VMQ 消化。

谢国龙2014.02.249
更改型号BCD-201VMQ 额定电流
谢国龙
2014.03.06。

第1篇一、总则为确保冰箱冰柜设备的安全、有效运行，防止事故发生，保障员工及顾客的人身安全和财产安全，特制定本操作规程。

二、设备要求1. 冰箱冰柜设备必须专人负责，操作、维修及保养。

2. 操作人员需经过安全培训，取得上岗证，并熟悉《使用说明书》，了解设备的基本结构和性能，熟练掌握操作规程。

三、操作规程1. 设备放置：冰箱冰柜应放置在平整、牢固的平面上，保持通风良好，远离热源、湿气、油烟。

两侧以及背面或墙壁距离不得少于10cm，顶部不得放置其他发热物品和杂物。

2. 温度设置：冷冻室保持零下10度至零下15度，冷藏室保持零度至零下3度。

3. 食品存放：冷冻和冷藏食品必须严格区分开，不得混放。

对生热区进行标识。

菜品按先进先出分类，按菜品质的上下堆码存放，按销售量灵活存放，按食品生熟类别存放。

若有味道较重的物品必须包装后方可进入冰箱以免串味。

4. 顶部物品：冰箱冰柜顶部禁止堆放其他物品，以免影响正常使用。

5. 门的使用：冰箱冰柜门使用时即开机关，操作轻便。

6. 私人物品：冰箱冰柜正当使用，不得存放私人物品和与经营无关的其他物品。

7. 过热过湿物品：过热过湿的物品待冷却或包装后方可进入冰箱。

8. 停电处理：在停电情况下尽量减少冰箱的开启次数。

9. 异常处理：操作过程中出现任何异常现象，应马上切断电源停机，通报上级主管处理，不得私自开机维修。

四、设备维护与保养1. 定期检查：操作人员需定期检查冰箱冰柜设备，确保设备运行正常。

2. 除霜：冷冻冷藏柜必须经常检查，定期除霜，保持霜簿冷冻有效，并且柜内不得有血污，不得存放非食品。

3. 清洁：冰柜、冷冻冷藏柜必须保持外观整洁，运转正常。

4. 保养：操作人员需按照《使用说明书》进行设备保养，确保设备使用寿命。

五、附则1. 本规程适用于所有冰箱冰柜设备操作人员。

2. 操作人员应严格遵守本规程，确保设备安全、有效运行。

3. 本规程由设备管理部门负责解释和修订。

4. 本规程自发布之日起实施。

Open Display Merchandisers Installation and Operation Manual Please read this manual completely before attempting to install or operate this equipment.TOM-30L*-**-*-N TOM-40L*-**-*-N TOM-50L*-**-*-N TOM-60L*-**-*-N TOM-75L*-**-*-N TOM-30S*-**-*-NTOM-40S*-**-*-NTOM-50S*-**-*-NTOM-60S*-**-*-NTOM-75S*-**-*-NTOM-W-30S*-**-*-NTOM-W-40S*-**-*-NTOM-W-50S*-**-*-NTOM-W-60S*-**-*-NTOM-W-75S*-**-*-NTOM-W-30S*-**-*-UF-NTOM-W-40S*-**-*-UF-NTOM-W-50S*-**-*-UF-NTOM-W-60S*-**-*-UF-NTOM-W-75S*-**-*-UF-NHorizontal Open Display CasesINTRODUCTION 10SPECIFICATIONS 11INSTALLATIONDamage inspectionPower switchLight switchTemperature controlThermometerPlacing the productMerchandiser not functioningMerchandiser is warmLights are not workingCondenser coilLocation of displayLeveling of display 12OPERATING INSTRUCTIONS 14MAINTENANCE & CLEANING 15WARRANTY 17TROUBLESHOOTING 16NOTE 19~22• This equipment is not intended for use by persons (including children) withreduced physical, sensory or mental capabilities, or lack of experience andknowledge unless they have been given supervision or instructions concerning the use of this equipment and the hazards involved by a person responsible for their safety.• Special instructions for those persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, are notincluded in this manual and are not required to be included.• Children shall not play with the appliance.• Cleaning and user maintenance shall not be made by children without supervi sion.WARNINGThis unit uses R-290 (propane), or R-600a (isobutane) as a refrigerant. These hydrocarbon refrigerants are highly environmentally compatible but also are flammable and combus-tible. Please read this manuel thoroughly before installing and operating the unit. Please take cautious measures to avoid risk of fire or explosion.PLEASE REFER TO THE LABEL INSIDE THE CABINET TO CHECKREFRIGERATION TYPE AND VOLUME.WARNING• Handle the unit with care in order to avoid any serious damage to therefrigeration system.• The refrigerant tubing, condenser, and evaporator coils are easily prone todamage while handling, moving, installing, and cleaning the unit, which may leadto fire or even explosion.• Refrigerant squirting out of the pipes could ignite or cause an eye injury. If a leakis detected, avoid any naked flames or potential sources of ignition and air theroom in which the appliance is standing for several minutes.• In order to avoid the creation of a flammable gas-air mixture in case of a leakin the refrigerating circuit, the size of the room in which the appliance is placed depends on the amount of refrigerant used. The room must be 35.31ft3 1m³ in sizefor every 0.28oz (8g) of R-290 refrigerant inside the appliance. The amount of refrigerant in your particular appliance is shown on the label inside the cabinet.This appliance contains a small amount of propane (R-290) or isobutane(R-600a) refrigerant, a natural gas with high environmental compatibility,but which is also combustible. When transporting and installing theappliance, care should be taken to ensure that no part of the refrigeratingcircuit is damaged.• Never start up an appliance showing any signs of damage. If in doubt, contacta qualified service professional.• In case of any hazardous activities such as fire or explosion, move the unit awayfrom any source of ignition to a well ventilated area.• Further service and repair must be done by a qualified technician who is familiarwith the safety standards, and also has thorough understanding and knowledgeof the flammable refrigerants.• Any and all technicians handling these units must be equipped with properpersonal protection and equipment and follow applicable safety measures and precautions to avoid risk of fire or explosion.SAFETY PRECAUTIONSTo avoid any risk of fire, explosion, electric shock, personal injury, material damage or incorrect use of the appliance, be sure to observe the following safety precautions. (After reading these owner’s manual instructions, please keep the manual booklet in a safe place for reference. Remember to hand it over to any subsequent owners)WARNING• The unit must be installed and located in accordance with the manufacturer’s installation instructions.• Installation work must be performed in accordance with the National Electric Codeby qualified and authorized personnel only.• Repairs and replacement work must be performed by a qualified and authorized service professional only using genuine replacement parts.• Do not use an extension cord or an adapter plug. Because of the potential safety hazards under certain conditions, we strongly recommend against any use of an extension cord or an adapter plug.• Do not, under any circumcetances, cut or remove the ground prong from thepower cord. For personal safety, this appliance must be properly grounded.• Do not store volatile and flammable substances in the refrigerator. The storage of benzene, thinner, alcohol, ether, LP gas, or other explosive substances may causean explosion.• Do not store or use gasoline or other flammable vapors and liquids in the vicinityof this appliance as well as any other appliances.• The appliance is not intended for use by children without supervision.• Do not allow children to climb, stand, or hang on the refrigerator doors or shelvesin the refrigerators. They could damage the refrigerator and seriously injure themselves.• To prevent suffocation and entrapment hazards to children, remove the doors and seals from the refrigerator before disposing of it or discontinuing its use.INSTALLATION & USAGEWARNING• Do not install the unit in a damp place where it could be splashed with water. Incorrect insulation of the electrical parts may cause fire or electric shock.• Do not plug several appliances into the same sockets. This could cause overheating and risk start of a fire.• Keep the power plug away from the rear of the cabinet. A damaged power plug may cause fire due to overheating.• Do not spray water directly to the interior or exterior of the appliance. There is a risk of fire or electric shock.• Do not place any containers filled with water on top of the appliance. If the water spills onto any electrical parts, it may lead to fire or electric shock.• Do not attempt to repair, disassemble or alter the appliance. It may cause fire or abnormal operations which may lead to injury.• Unplug the refrigerator before making repairs, replacing a light bulb, or cleaning.• Plug into a grounded 3-prong outlet. Do not remove the ground prong.CAUTION• Do not store too much food in the appliance. When you open the door, an item may fall out and cause personal injury or material damage.• Do not put bottles or any kind of glass in the freezer. The container may break and cause personal injury.• Do not disconnect the power cord by pulling on it. This may disconnect a wire and cause a short circuit.INSTALLATION & USAGECAUTION• There is a risk of death from suffocation if a child puts the packing materials on his or her head.• Do not store any articles on top of the appliance. Articles may fall while opening or closing the door, and could cause personal injury or material damage.• Do not store pharmaceutical products, scientific materials or othertemperature-sensitive products in the refrigerator. Products that require strict temperature controls must not be stored in the refrigerator.• Do not let children hang on the door.• Do not touch any cold surfaces or food containers in the freezer with damp or wet hands. Skin may stick to these extremely cold surfaces and may cause frostbite.• Remove any foreign matter from the power plug pins. Otherwise, there is a risk of fire.• Do not insert your hand into the bottom area of appliance. Any sharp edges may cause personal injury.• After unplugging the appliance, wait at least five minutes before plugging it back in. Abnormal operation of the freezer may cause material damage.• If the appliance is not used for a long period of time, unplug it from the power supply. Any deterioration in the insulation may cause fire.• Do not let children touch or play with the control panel on the front of the appliance. - Do not allow children to play with this appliance.- Do not stand or lean on the base panel, pull-out parts, or doors.- Repairs and maintenance of the appliance should only be performed by a qualified technician. Incorrect repairs done by an unqualified person may be a potential source of danger that could have critical consequences for the user of theappliance.- Never put ice cubes or ice pops straight from the freezer into your mouth.The low temperature may cause cold burns.PROPER DISPOSAL OF OLD APPLIANCEFor environmental purposes, refrigeration appliances must be disposed of properly. This applies to your old appliance, and at the end of its service life, for your new appliance as well.WARNINGBefore disposing of old appliances, make them inoperable. Remove plug from mains, severe the power cable, and remove or destroy any snap or latch closures.This eliminates the danger of any children locking themselves into the appliance (danger of suffocation) or placing themselves into other life-threatening situations.• The appliance may not be disposed of with domestic waste or bulky refuse.• The refrigerant circuit, especially the heat exchanger at the back of the appliance, may not be damaged.• Information concerning collection schedules or locations can be obtained from the local disposal authorities.CAUTIONThe refrigeration used in refrigerator/freezer and the gases in the insulation material require special disposal procedures. Ensure that none of the pipes onthe back of the appliance are damaged prior to disposal.BEFORE YOU CALL FOR SERVICEBefore contacting our Service Department, review the detailed troubleshooting tips in the Owner’s manual.1. Try to remedy the problem. Please read the “Troubleshooting Guide” section first and you may not need to call for service.2. Restart the appliance to check whether the fault repeats. If the malfunction persists, switch off the appliance and try again after an hour.3. If the malfunction still persists, then contact our Customer Service, specifying:• The nature of the problem,• The appliance model number and serial number• Your full address, telephone number and area code.This owner’s manual has important information. Please read the entire manual before installing your new Turbo Air Open Display Merchandiser. For specific questions not answered on this manual, please call:CUSTOMER SERVICE DEPARTMENTTURBO AIR4184 E. Conant St.Long Beach, CA 908081-800-381-7770Please write down the model and serial number of your merchandiser for future refer-ences:MODEL NUMBERSERIAL NUMBERKeep this manual in a safe place for your reference.Failure to read this manual in its entirety can result in misuse of the equipment, which may cause personal injury or equipment failure.WARNING!Display Case should be on a minimum 20 Amps dedicated outlet and minimum 12 AWG wire for proper operation.Model Dimension (W x D x H) in.Electricity Full Load Amperes Compressor Refrigerant Lighting Defrost Net WeightDimension (W x D x H) in.Electricity Full Load Amperes Compressor Refrigerant Lighting Defrost Net WeightDimension (W x D x H) in.Electricity Full Load Amperes Compressor Refrigerant Lighting Defrost Net WeightTOM-30L*-**-*-N 28 x 34.6 x 46.1115V/1PH/60HZNEU6217U2 X NEU6217UNEK6210UR-290Timed off defrost6.7A 6.3W X 2257 lbs.TOM-40L*-**-*-N 39 x 34.6 x 46.16.9A9.5W X 2317 lbs.TOM-50L*-**-*-N 50.8 x 34.6 x 46.16.9A12.6W X 215.8W X 218.9W X 218.9W X 1376 lbs.TOM-60L*-**-*-N 63.2 x 34.6 x 46.111.3A448 lbs.TOM-75L*-**-*-N 75.6 x 34.6 x 46.111.3A507 lbs.Model TOM-30S*-**-*-N 28 x 34.6 x 41.7115V/1PH/60HZNEU6217U2 X NEU6217UNEK6210UR-290Timed off defrost6.7A 6.3W X 1255 lbs.TOM-40S*-**-*-N 39 x 34.6 x 41.76.9A9.5W X 1313 lbs.TOM-50S*-**-*-N 50.8 x 34.6 x 41.76.9A 12.6W X 115.8W X 118.9W X 1370 lbs.TOM-60S*-**-*-N 63.2 x 34.6 x 41.711.3A 440 lbs.TOM-75S*-**-*-N75.6 x 34.6 x 41.711.3A498 lbs.Model TOM-W-30S*-**-*-N 26.9 x 34 x 56.5115V/1PH/60HZNEU6217U2 X NEU6217UNEK6210UR-290Timed off defrost6.7A 5.3W X 3354 lbs.TOM-W-40S*-**-*-N 38.9 x 34 x 56.56.9A8.4W X 3425 lbs.TOM-W-50S*-**-*-N 50.9 x 34 x 56.56.9A 11.6W X 314.7W X 317.9W X 18.4W X 4496 lbs.TOM-W-60S*-**-*-N 62.7 x 34 x 56.511.3A 567 lbs.TOM-W-75S*-**-*-N 75.2 x 34 x 56.511.3A638 lbs.Dimension (W x D x H) in.Electricity Full Load Amperes Compressor Refrigerant Lighting Defrost Net WeightModel TOM-W-30S*-**-*-UF-N 26.9 x 34 x 56.5115V/1PH/60HZNEU6217U2 X NEU6217UNEK6210UR-290Timed off defrost6.7A 5.3W X 3354 lbs.TOM-W-40S*-**-*-UF-N 38.9 x 34 x 56.56.9A8.4W X 3425 lbs.TOM-W-50S*-**-*-UF-N 50.9 x 34 x 56.56.9A 11.6W X 314.7W X 317.9W X 18.4W X 4496 lbs.TOM-W-60S*-**-*-UF-N 62.7 x 34 x 56.511.3A 567 lbs.TOM-W-75S*-**-*-UF-N 75.2 x 34 x 56.511.3A638 lbs.DAMAGE INSPECTIONPrior to installation, the customer must check for damages with the freight company before the unit is accepted.1.If the crate is damaged, make sure to note the damage on the Bill of Ladingprior to signing the delivery off.2.Concealed damage must be reported within 5 days of receiving the unit. Bill ofLading must be faxed to the Claims department. Pictures of both unit andcrating may be requested.LOCATION OF OPEN DISPLAY MERCHANDISEROpen Display Merchandisers are designed to be in an area that is ambient 80 degrees Fahrenheit (dry bulb) or colder with 55 percent relative humidity. If the installed unit is in a warm ambient area, it may not be as effective. Position the Merchandiser at its final location before removing the shipping skid. There are four bolts at the bottom of the merchandiser that secure the shipping skid. Remove all four bolts to remove the skid. Allow three inches of space from the wall to the back of the merchandiser. Condenser is located to the front. Do NOT block inlet.LEVELING THE OPEN DISPLAY MERCHANDISERFour leveling legs are provided to level your Merchandiser. Use a leveler to ensure the unit is evenly leveled on all four corners. If the unit is not leveled correctly, excess water buildup will not drain properly. If you do not wish to use the levelers, they can be turned inwards.Units should not be placed in direct sunlight.Units should not be placed near doorways.Level the cabinet on all four corners of the base.Units should not be placedUnits should not be placedConfirm there isenough clearancefor proper aircirculationOperatingenvironment notto exceed 80℉(27℃) and 55%humidity.Do not loadproduct beyondthe edge of theshelfLevel and set your merchandiser in place. Connect all necessary electrical connections. Your Open Display Merchandiser should now be ready for use.• POWER SWITCH:Located at the bottom of front panel right, colored in red.TOM-**L, TOM-**S• LIGHT SWITCH:Located at the bottom of front panel right, colored in green. • TEMPERATURE CONTROL:Located at the bottom of front panal right.Thermometer showing temperature is located on the right side of the back panel.PRODUCT PLACEMENT:Overloading of product or placing products against the back wall or suction grill may cause disruption in air flow, which may cause the unit to not cool properly.NOTE:• Do not place products into your merchandiser until the desired temperature is reached.• Do not place hot products into the merchandiser.• POWER SWITCH:Located at the bottom of rear panel right, colored in red.TOM-W-**STHERMOMETER• LIGHT SWITCH:Located at the bottom of rear panel right, colored in green. • TEMPERATURE CONTROL:Located at the bottom of rear panal right.HOW TO SET THE TEMPERATURE1. 2. The display panel shows the current temperature setting.3.4. The temperature setting has been changed and the display panel showsthe current temperature.MANUAL DEFROST1. Press the DEFROST button for 3S to begin a manual defrost.2. .3. stop defrosting and turn off the defrost mode..Press the SET button for 1S to check the temperature setting.To change the temperature, press the UP or DOWN button and press the SET button when adjustment is complete.During the defrosting process, pressing the DEFROST button for 3S will Defrost mode will be off automatically when it is completeAlways turn off your unit (both power and lights) when cleaning. Remove all products and allow your unit to reach room temperature. Do not allow electrical components to get wet.a. Do not clean with harsh detergents. Use mild soap.b. Remove all products.c. Remove shelves and bottom trays.d. Clean interior with warm water and mild detergent.e. Wipe with damp cloth. Do not leave soap residue.1. Disconnect the electrical power from the unit.2. Remove the front cover and base cover with screw driver.3. Brush the dirt, lint, etc. from the finned condenser coil.4. When finished, be sure to replace the front cover and base cover.5. Reconnect the electrical power to the unit.CLEAN YOUR OPEN DISPLAY MERCHANDISER THOROUGHLY BEFORE FIRST USAGE.CLEANING THE CONDENSER COILCondenser coil is located at bottom behind panel.NOTE:For a self-cleaning condenser equipped model, condenser cleaning is not required.However, it is recommended to blow the condenser coil out with Nitrogen once or twice a year. Note that the condenser cleaner may not remove grease.For any problems with your unit, please refer to the following check list. If you are still experiencing problems or have questions, please call the Customer Service line at1-800-381-7770.Ⅰ. MERCHANDISER NOT FUNCTIONINGa. Check to see that the breaker hasn’t tripped.b. Check that enough power is BEING supplied to the unit.c. Check that the power switch is on.Ⅱ. MERCHANDISER IS WARMa. Check the condenser to see if it is clean.b. Check that the inner airflow is not being blocked by products.Ⅲ. LIGHTS ARE NOT WORKINGa. Check that light switch is on.b. Check that the lights are placed in the lamp holders correctly.。