VSTP 5.0 Test：3 vNetworks

User GuideAX3000 Wi-Fi 6 Bluetooth 5.0 PCIe AdapterArcher TX3000EContentsAbout This Guide 01 Chapter 1 Get to Know About Y our Adapter 02 Chapter 2 Connect to a Computer 04 Chapter 3 Use Y our Adapter 07 3. 1. Install Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .08 3. 2. Join a Wireless Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09 3. 3. Pair with Bluetooth Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09 3. 4. Uninstall Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .09 Appendix: Troubleshooting 10About This GuideThis guide is a complement to Quick Installation Guide. The Quick Installation Guide instructs you on quick installation, and this guide provides the product overview and more detailed instructions for each steps.When using this guide, please notice that features available of the adapter may vary by model and software version. It may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.Conventions*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) AP limitations, including rated performance, location, connection quality, and AP condition.*Use of MU-MIMO requires AP to also support MU-MIMO.*Use of 1024-QAM requires AP to also support 1024-QAM.More Info• The latest driver can be found at Download Center athttps:///support.• The Quick Installation Guide (QIG) can be found where you find this guide or inside the package of the product.• Specifications can be found on the product page at https://.• A TP-Link Community is provided for you to discuss our products at https://.Chapter 1Get to Know About Y our AdapterThis chapter introduces the detail of the adapter.connect as more as you want and enjoy the smoother experience than ever.With equipped 1024-QAM and MU-MIMO technology, Archer TX3000E delivers faster and clearer Wi-Fi to take your PC’s Wi-Fi reception to the next level and fully achieve the potential of your Wi-Fi 6 router.• Supports IEEE 802.11ax/ac/n/a 5 GHz, IEEE 802.11ax/n/g/b 2.4 GHz• Supports Bluetooth 5.0/4.2/4.0• Supports infrastructure mode• Maximum speed of up to 2402Mbps on 5GHz network and 574Mbps on 2.4GHz network• Supports WEP, WPA/WPA2/WPA3, WPA-PSK/WPA2-PSK,802.1X• Windows 10 (64-bit) only• Environment:Operating T emperature: 0℃~40℃ (32℉~104℉)Storage T emperature: -40℃~70℃ (-40℉~158℉)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~90% non-condensingChapter 2 Connect to a Computer This chapter introduces how to connect the adapter to your computer. Please note that images are for demonstration only.1 2 3 Locate an available PCIE X1 slot and carefully insert the adapter.Tip:If the bracket is not suitable for your computer, detach it from the adapter’s board and replace it with the low-profile bracket.4 Locate an available F_USB connector and carefully plug the Bluetooth USB cable into it.U S B U S BNote:If the Bluetooth USB cable is not correctly connected to the motherboard, Bluetooth function won’t work even after driver installation.5 Install the antennas on the magnetized antenna base, then connect the base to the adapter.Tip:T o maximize performance, avoid physical obstructions in the path between your antennas and router.6 Replace the case panel, plug in the power cable and turn on your computer. After connecting your adapter to the computer, follow the instructions in the next chapter to install Wi-Fi and Bluetooth drivers.Chapter 3Use Y our AdapterThis chapter introduces how to install or uninstall your adapter’s Wi-Fi and Bluetooth drivers, connect to a wireless network, and pair with a Bluetooth device on Windows 10 (64 bit) system.This chapter includes the following sections:• Install Drivers• Join a Wireless Network• Pair with Bluetooth Devices• Uninstall DriversChapter 3Use Y our Adapter 3 1 Install Drivers1 Insert the CD and run the Autorun exe.Note: Y ou can also check the new release and download the driver athttps:///support/download/2 Install the Wi-Fi and Bluetooth drivers.Note: DO NOT install the Bluetooth and Wi-Fi drivers simultaneously. If one driver is being installed, please wait until it is finished, then try installing the other again.• Wi-Fi: Click and follow the on-screen instructions to complete the Wi-Fi installation.• Bluetooth: Click and follow the on-screen instructions to complete the Bluetooth installation.Chapter 3Use Y our Adapter 3 212 Select your Wi-Fi network, click Connect, and enter the password when prompted.3 3 Pair with Bluetooth Devices1 Right click the (Bluetooth) icon on the taskbar.Note: If it’s not displayed, refer to Troubleshooting-T4.2 Select Add a Bluetooth Device to scan for available devices.3 Select your Bluetooth device from the list and follow the on-screen instructions to complete pairing.Note: Make sure your device’s Bluetooth is enabled and discoverable.3 4 Uninstall Drivers• Uninstall Wi-Fi driverGo to Start > Apps, find the Wi-Fi driver Inter® PROSet/Wireless Software. Click on it and select Uninstall, then follow the on-screen instructions to complete the uninstallation.• Uninstall Bluetooth driverGo to Start > Apps, find the Bluetooth driver Inter(R) Wireless Bluetooth(R). Click on it and select Uninstall, then follow the on-screen instructions to complete the uninstallation.Appendix: Troubleshooting T1 W hat should I do if the adapter is not detected?• Make sure the adapter is securely located in the appropriate PCI-E X1 slot.• Make sure you meet the system requirements for the adapter. The current version of Archer TX3000E only supports Windows 10 (64bit).• Make sure you use the latest driver for your specific adapter. The latest drivers can be found at the product’s Support page at https://.• Try restarting the computer or try the adapter on a different computer.T2 H ow to check if I have installed the drivers successfully or not?•installed the Wi-Fi driver successfully.• If you can see the (Bluetooth) icon on the taskbar, you have already installed the Bluetooth driver successfully.T3 W hat should I do if can’t connect to the Wi-Fi after installing the driver?• Refer to T2to check if you have installed the driver for your adapter successfully .• Disable the antivirus software and firewall, then try again.• Make sure the adapter is securely located in the appropriate PCI-E X1 slot.• Try a different PCI-E X1 slot on the computer.• Restart your computer and try again.• Reinstall the driver and try again.T4 W hat should I do if the Bluetooth icon doesn’t appear?• Make sure you have turned on the Bluetooth in your Windows settings. T o enable Bluetooth, go to Start > Settings > Devices> Bluetooth & other devices and turn on Bluetooth.• Make sure there are no other Bluetooth devices on the computer. If there are, disable all existing Bluetooth devices in Device Manager, then reinstall the adapter and try again.Tip: T o go to Device Manager: Right-click My Computer or This PC, select Manage, go to Device Manager and disable all existing Bluetooth devices.T5 H ow to find the hardware version of the adapter?• The hardware version printed on the product label on the package or the adapter. There is a character string “Ver:X.Y” (for example, Ver:1.0) in the Serial Number field, and the number X is the hardware version of the adapter.For more detailed instructions:• Can’t find the hardware version of the adapter: https:///faq-46.html • Can’t find or connect to the wireless networks: https:///faq-2253.html • Can’t install the driver: https:///faq-2252.htmlCOPYRIGHT & TRADEMARKSSpecifications are subject to change without notice. is a registered trademark of TP-Link T echnologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link T echnologies Co., Ltd. Copyright © 2019 TP-Link T echnologies Co., Ltd. All rights reserved.FCC STATEMENTProduct Name: AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe AdapterModel Number: Archer TX3000EResponsible party:TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: /us/T el: +1 626 333 0234Fax: +1 909 527 6803E-mail:*********************This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/ TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1 ) This device may not cause harmful interference.2 ) This device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsibleNote: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.FCC RF Radiation Exposure Statement:This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.“T o comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.Issue Date: 2019-09-24CE Mark WarningThis is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.OPERATING FREQUENCY(the maximum transmitted power) 2400MHz—2483.5MHz(20dBm)5150MHz—5250MHz(23dBm)5250MHz—5350MHz(23dBm)5470MHz—5725MHz(23dBm)EU declaration of conformityTP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/ EU and (EU)2015/863.The original EU declaration of conformity may be found athttps:///en/ceRF Exposure InformationThis device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.The device complies with RF specifications when the device used at 20 cm from your body.Attention: This device may only be used indoors in all EU member states and EFTA countries.AT BE BG CH CY CZ DE DKEE EL ES FI FR HR HU IEIS IT LI LT LU LV MT NLNO PL PT RO SE SI SK UKCanadian Compliance StatementThis device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:(1) This device may not cause interference.(2) This device must accept any interference, including interference that may cause undesired operation of the device.L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :1) L’appareil ne doit pas produire de brouillage;2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.This radio transmitter (IC: 1000M-AX200NG/ Model: Archer TX3000E) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list below, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Le présent émetteur radio (IC: 1000M-AX200NG/ Model: Archer TX3000E) a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types d’antenne non inclus dans cette liste ci-dessous et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur. Antenna Two High-Gain Dual Band AntennasCaution:1 ) The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;2 ) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;3 ) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; andDFS (Dynamic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.Avertissement:1 ) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;2 ) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer à la limitation P.I.R.E.;3 ) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s) utilisant la bande 5725-5850 MHz doit se conformer à la limitation P.I.R.E spécifiée pour l’exploitation point à point et non point à point, selon le cas.Les produits utilisant la technique d’atténuation DFS (sélection dynamique des fréquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz. Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.Industry Canada StatementCAN ICES-3 (B)/NMB-3(B)Korea Warning Statements당해무선설비는운용중전파혼신가능성이있음.NCC Notice注意！依據 低功率電波輻射性電機管理辦法第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。

数通在线实验室操作指导书声明Copyright ©2005华为技术有限公司版权所有，保留一切权利。

非经本公司书面许可，任何单位和个人不得擅自摘抄、复制本书内容的部分或全部，并不得以任何形式传播。

®、HUAWEI®、华为®、C&C08®、EAST8000®、HONET®、®、视点®、ViewPoint®、INtess®、ETS®、DMC®、TELLIN®、InfoLink®、Netkey®、Quidway®、SYNLOCK®、Radium®、雷霆®、M900/M1800®、TELESIGHT®、Quidview®、Musa®、视点通®、Airbridge®、Tellwin®、Inmedia®、VRP®、DOPRA®、iTELLIN®、HUAWEI OptiX®、C&C08iNET®、NETENGINE™、OptiX™、iSite™、U-SYS™、iMUSE™、OpenEye™、Lansway™、SmartAX™、边际网™、infoX™、TopEng™均为华为技术有限公司的商标。

对于本手册中出现的其它商标，由各自的所有人拥有。

由于产品版本升级或其它原因，本手册内容会不定期进行更新。

除非另有约定，本手册仅作为使用指导，本手册中的所有陈述、信息和建议不构成任何明示或暗示的担保。

技术支持问题类别联系人实验室问题（非数通技术）刘秋实（39012）实验室安排、学习需求等史宁（22179）数通技术类问题或者咨询800目录声明 (1)技术支持 (1)1 数通在线实验室简介 ............................................................................................................. 1-32 数通在线实验室安全使用管理规定........................................................................................ 2-33 数通在线实验室使用方法 ...................................................................................................... 3-63.1 实验室使用操作流程图示......................................................................................... 3.1-63.2 创建L2TP连接到远程实验室网络........................................................................... 3.2-63.3 远程桌面连接到WVRP服务器................................................................................ 3.3-93.4 启动CCagent ........................................................................................................ 3.4-103.5 启动WVRP Control Center ................................................................................... 3.5-123.6 建立网络拓扑结构 ................................................................................................. 3.6-133.7 加载路由器软件包 ................................................................................................. 3.7-163.8 推荐使用超级终端登录到路由器进行操作演练...................................................... 3.8-183.9 退出WVRP实验环境 ............................................................................................ 3.9-194 使用形式.............................................................................................................................. 4-204.1 单人使用WVRP服务器......................................................................................... 4.1-204.2 多人使用WVRP服务器......................................................................................... 4.2-205 使用FAQ............................................................................................................................. 5-21数通在线实验室操作指导书1 数通在线实验室简介在遵守公司信息安全管理规定的前提下，数通远程实验室通过VPN技术实现了远程登录：●员工使用L2TP接入实验室网络；●员工使用远程桌面连接登录到实验室WVRP服务器群；●员工在WVRP中创建不同网络拓扑，进行操作演练；●WVRP只支持VRP5.0，相关命令手册、操作手册请参考VRP5.0版本，参考资料：\\info-server\3-中文归档\0105-路由器\04-vrp\02-vrp5.10\31131338-成套资料-通用路由平台VRP-(VRP5.10,V5.10)）2 数通在线实验室安全使用管理规定1、为了免除实验环境可能对公司网络产生的安全威胁，在使用实验环境模拟网络时，网络中的路由器设备不能配置以下地址：192.168.0.0/24 10.0.0.0/8 172.16.0.0/16。

实验三配置0SPFv3协议木实验将在H3C路由器上演示0SPFv3协议的基础配置1. 实验目的熟悉H3C路由器上0SPFv3协议的配置命令熟悉0SPFv3查看和监测的相关命令2. 设备要求木实验需要以下设备3台具有2个以太网接口的H3C路由器1台PC （可用做调试终端），以及CONSOLE电缆及转接器2条双绞线跳线3.拓扑结构及配置说明木实验的拓扑结构和设备命名如图所示• RT1 • RT3a.把PC通过CONSOLE电缆连接到路由器的CONSOLE端口上。

b.使用1条双绞线跳线连接路由器H3C-RI的EthernetO/O接口和H3C-R2 的EthernetO/O 接口。

c.使用1条双绞线跳线连接路由器H3C-R2的EthernetO/1接口和H3C-R3 的EthernetO/1 接口。

木实验的配置准备数据详见表4.实验配置及监测结果连接好所有设备，给各设备加电以后，开始按照以下步骤进行实验。

第1步：配置RIPNG协议在H3C路由器上完成0SPFv3协议的配置，见配置清单配置清单H3C-R1 配置：[RT1]router id 1. 1. 1. 1[RTl]ospfv3 1~RTl-ospfv3-lj router-id 1.1.1.1_RTl-ospfv3-lJ quit[RTl]int gO/O/O[RTl-GigabitEthernetO/O/O]ipv6 add 2001::1/64 [RTl-GigabitEthernet0/0/0j ospfv3 1 area 0~RTl-GigabitEthernetO/O/OJ quitH3C-R2 配置:[RT2]route id 2. 2. 2. 2[RT2]ospfv3 1[RT2-ospfv3~l]router-id 2.2.2.2[RT2 - ospfv3T[ quit[RT2]int g0/0/0[RT2~GigabitEthernet0/0/0]ipv6 add 2001::2/64[RT2~GigabitEthernetO/0/0]ospfv3 1 area 0[RT2-GigabitEthernet0/0/0J quit[RT2]int g0/0/l[RT2~GigabitEthernet0/0/1]ipv6 add 3001::1/64 [RT2-GigabitEthernet0/0/l]ospfv3 1 area 0_RT2-GigabitEthernet0/0/lJ quitH3C-R3 配置：[RT3] router id 3. 3. 3. 3[RT3]ospfv3 1[RT3-ospfv3-lJ router-id 3.3.3.3[RT3 - ospfv3T] quit[RT3]int g0/0/l[RT3-GigabitEthernet0/0/l]ipv6 add 3001::2/64[RT3-GigabitEthernet0/0/l]ospfv3 1 area 0_RT3-GigabitEthernet0/0/l]quit〈1>在上而的配置中，首先配置Router ID,在系统视图下的命令是router id router-id,Router ID是32位的数，以点分十进制数表示，形式上于IPv4地址相同。

O R I O N T E L E C O M N E T W O R K S I N C.VCL-TP, Teleprotection Equipment withTrip Counter DisplayData SheetHeadquarters: Phoenix, Arizona Orion Telecom Networks Inc. 20100, N 51st Ave, Suite B240, Glendale AZ 85308Phone: +1 480-816-8672Fax: +1 480-816-0115E-mail: **********************Regional Office: Miami, FloridaOrion Telecom Networks Inc. 4000 Ponce de Leon Blvd. Suite 470 Coral Gables, FL 33146Phone: + 1-305-777-0419Fax: + 1 786-536-4181E-mail: **********************VCL-TP, Teleprotection Equipment is an extremelyreliable and flexible product that offers up to 8, 2-way independent command channels which can beoperated selectively or simultaneously over a widechoice and a variety of transmission interfaces.VCL-TP, Teleprotection EquipmentThe VCL-TP, Teleprotection Equipment offers a choice of transmission interfaces which include the IEEE C37.94; IP/MPLS; G.703 E1, 2.048Mbps and G.703 64Kbps co-directional digital data interface options. VCL-TP, Teleprotection Equipment may be used independently, in a standalone point-to-point application over C37.94 or IP/MPLS links, or as an integrated part of the VCL-MX Version 6, E1 Voice and Data Multiplexer solution over SDH / PDH E1 networks.The “Trip Counter Display” shows the total number of “Trip Input / Trip Receive” and “Trip Output / Trip Send” commands on e ach of the 8 Teleprotection channels, individually. A manual display counter reset option is also provided which may be enabled or disabled by the system administrator.Trip Counter Display and Alarm Extension Unitis designed as an optional extension of theTeleprotection Equipment to provide 8 Channel,Digital Trip Counter Display along with 8External Relay Alarm outputs.Front View: Trip Counter DisplayAnd Alarm Extension UnitThe Trip Counter Display and Alarm Extension Unit may be either powered from the Teleprotection Equipment, or directly from a 48V DC, 110V DC, 220V DC or 250V DC power source. 1+1 Redundant Power is also offered as an option.Transmission interface options include:•IEEE C37.94 compliant Multi-Mode optical fiber interface for transmission over short-reach multi-mode optical fiber link•IEEE C37.94 modulation compliant Single-Mode optical fiber interface for transmission over long-reach, single-mode optical fiber link (≤ 40 KM, ≤ 80 KM, ≤120 KM, ≤ 150 KM)•IP/MPLS Interface – 10/100BaseT (Electrical) or 100BaseFX (Optical) Ethernet link•Option of 1+1 redundant optical path protection / route protection•64Kbps, G.703 co-directional digital data interface option for transmission over 64Kbps data links •E1, 2.048Mbps, G.703 interface option for transmission over E1 link•Automatic switchover to redundant link in the event of primary link failure.Application DiagramsFigure #1– Teleprotection over IEEE C37.94 Optical Interface Figure # 2– Teleprotection over IEEE C37.94 Optical Interface in 1+1 Configuration Figure # 3– Teleprotection – IEEE C37.94 Interface over SDH / PDH NetworkFigure # 4 –Teleprotection - 64 kbit/s G.703 co-directional data channel over SDH / PDH NetworkFigure # 5 –Teleprotection over an E1 InterfaceFigure # 6 –Teleprotection over an IP/MPLS NetworkFigure # 7 –VCL-TP Teleprotection over redundant 1+1 C37.94 compliantlinks with IEC-61850 GOOSE supportNote: Available with 1+0 and 1+1 Redundant C37.94 Compliant Optical Interface optionsFigure # 8 –VCL-TP Teleprotection over SDH / E1 PDH linkswith IEC-61850 GOOSE supportFeatures and Benefits:•Unrivaled Speed, Security and Reliability•Use in a Standalone, Point-To-Point Application over C37.94; IP/MPLS; E1 and G.703 64kbps Transmission Links.•Use as an integrated part of the VCL-MX V6 E1 Voice and Data Multiplexer solution over an SDH or PDH data network•1+1 Route / Path Protection when used as an integrated part of the VCL-MX V6 E1 Voice and Data Multiplexer solution over an SDH or PDH data network•Compact, standard 19-Inch Rack-mountable chassis•Bi-directional Transmission of 8 command Inputs and 8 command outputs•8 Channel “Trip Counter Display”•Full Duplex Operation, Automatic loop test facility•User programmable for Direct Tripping, Permissive Tripping and Blocking Protection Schemes (Distance Teleprotection).•Compliant with IEC 60834-1 and all applicable sections of IEC 60834-2 standards•SNMPv2 management protocol for management and monitoring•Optional - IEC 61850 GOOSE support. PSCH.1 Distance Protection Scheme as per IEC-61850.•IEEE C37.94 compliant Multi-Mode optical link interface option for short reach optical links•IEEE C37.94 compliant (modulation only) Single Mode optical link interface option for long reach optical links (≤ 40 KM, ≤ 80 KM, ≤ 120 KM, ≤ 150 KM)•IP/MPLS Network Interface to provide “Distance Protection” over IP/MPLS Network.•64Kbps, G.703 co-directional interface option for transmission over 4-wire electrical links• 2.048Mbps, G.703 interface option for transmission over 4-wire electrical links•Optional - 1+1 redundant optical path protection / route protection•Optional - 1+1 Route / Path Protection between E1 + C37.94 Optical interfaces; or C37.94 + C37.94 Optical interfaces for point-to-point protected transmission links. “Automatic Fail-Over Switching” in the event of the failure of the Primary Link•Available in 24VDC, 48VDC, 110VDC, 220VDC, 250VDC, 110V AC and 220V AC configurations. Performance:•Less than 2ms command transfer time.•Less than 4ms relay operating time.•Less than 6ms back-to-back operating time (including relay operating time) over IEEE C37.94 Optical Interface.•Less than 7ms back-to-back operating time over IP/MPLS Interface. Typically, less than 6ms back-to-back operating time (including relay operating time).•Less than 6ms back-to-back operating time (including relay operating time) over 2.048Mbps, E1 Interface.•Less than 7ms back-to-back operating time (including relay operating time) over 64 kbps, G.703 Co-directional 4 wire data interface.Flexibility and User Programmability:•User programmable command holding delay for error resistant command inputs•User programmable command sampling rate for error resistant command transmission.Maintenance•Manual Loop Test:This feature initiates a “Manual Loop-Test” of the transmission link that interconnects the “Local” Teleprotection Terminal and the “Remote” Teleprotection Terminal •Automatic Loop Test: The Automatic Link Test feature au tomatically initiates “Periodic Loop Tests” at user programmed intervals of the transmission link that interconnects the “Local”Teleprotection Terminal and the “Remote” Teleprotection Terminal•Delay Measurement: This feature automatically initiates an end-to-end “Delay Measurement Test” between the “Local” and the “Remote” Teleprotection Terminal through the interconnecting transmission link.Event and Alarm Logging•Time-Stamped Alarm Logging•Time-Stamped Event Logging•IRIG-B time synchronization option to synchronize time-stamps with GPS.•NTP time synchronization option to synchronize time-stamps with NTP Server.•IEEE-1588v2 time synchronization option to synchronize time-stamps with PTP Grandmaster. Management and Monitoring•RS232 serial, USB serial interfaces for local terminal access•10/100BaseT Ethernet Interface for remote access over an IP network•Encrypted Password Protection•Telnet - Remote access over IP links•Web Interface•SSH - Secured remote access using Secure Shell Protocol over IP links•SNMP Traps and NMS for real time remote monitoring and management over an IP network •Automatic Link Test feature – link testing at user programmable periodical intervals•Visual I/O status – LED Display.•Dry contact external alarm relay to connect an external alarm on an annunciator panel, which can be wired up for either NO or NC condition.Reliability•Advanced Communication Protocols to ensure reliable transmission of commands•Power Supply Immunity to withstand impulse surges and transients of up to 10,000 Volts•High Quality Relays – withstands voltage 10 kV between coil and contac ts (1.2 × 50 μþs)• 2.5kV RMS - Contact Input / Output Hi-port dielectric strength•Maximum Switching Voltage: 400V AC or 300V DC•Optoisolated Command Inputs•Optoisolated Relay Outputs•Relays compliant with IEC-255-0-20 / VDE 0435, 0631, 0700, 40013847 standards•Relays - Mechanical: 10,000,000 operations min. (at 18,000 operations/hour).Error Detection and Coding•Link Loss Detection•LOS Detection•Line Code Violation Detection•Block Command Encoding as per IEEE C37.94 (for C37.94 optical links). Technical Specifications:2.048Mbps, G.703 E1 Interface:64Kbps, G.703, 4-wire Data Interface:C37.94 Optical Fiber Interface - Option 1:C37.94 Optical Fiber Interface - Option 2:C37.94 Modulation Compliant Optical Fiber Interface - Option 3:IP / MPLS Network Interface:Command Voltage Options:Teleprotection Inputs CommandsTeleprotection Outputs Commands:Number of Commands:Input / Output Commands Combination Options:Command Transfer Time:•Less than 2ms command transfer timeRelay Operating Time:•Less than 4ms relay operating timeBack to Back Switching Time (including command transfer and relay operating time): •Less than 6ms back-to-back operating time (including relay operating time) over IEEE C37.94Interface.•Less than 7ms back-to-back operating time over IP/MPLS Interface. Typically, less than 6ms back-to-back operating time (including relay operating time).•Less than 6ms back-to-back operating time (including relay operating time) over G.703 E1,2.048Mbps interface.•Less than 7ms back-to-back operating time (including relay operating time) over G.703 E0, 64kbps, co-directional 4 wire data interface.Time Clock:•Built-in real time clock (RTC)•IRIG-B / NTP / IEEE-1588v2 Time synchronization options.Operations and Maintenance Interfaces:•RS232 serial interface for local terminal access•USB serial interfaces for local terminal access•10/100BaseT Ethernet Interface for remote access over an IP network.Configuration and Access Command Language:•Command Line Interface (English text commands).Transmission Standards and Compliances:•Electrical: ITU-T, G.703 for 64Kbps co-directional 4-wire data interface•Electrical: ITU-T, G.703 for 2.048Mbps interface•Optical: IEEE 37.94 compliant Multi-Mode optical interface•Optical: IEEE 37.94 compliant (modulation only) 1310nm Single-Mode optical interface•Laser: Class I (for Single-Mode Optical Interface) - Eye-safe as per EN 60825-1 specifications.•Ethernet: As per IEEE 802.3 specificationsTeleprotection Standards and Compliances•IEC 60834-1 and IEC 60834-2 (Teleprotection Command Systems)Power Supply Options•24V DC, range 18V DC ~ 32V DC•48V DC, range 36V DC ~ 70V DC•110V DC / 125V DC, range 80V DC ~ 140V DC•220V DC / 250V DC, range 80V DC ~ 300V DC•110V AC / 220V AC, range 80V AC ~ 264V AC•Voltage Withstand: Meets and exceeds IEC 834-1 and IEC 255 requirements.•Dual / redundant power supply inputs and power supplies are also offered as an option.•Short circuit protection•Reverse power input protection.Power Consumption•< 18 Watts.EMI, EMC, Surge Withstand and other Compliances•ESD, Voltage and Surge Withstand: Meets and exceeds IEC 61000-4-2, IEC 61000-4-4, IEC 61000-4-5, Level 4 specifications.•Immunity to Voltage Dips, Short Power Supply Interruptions and Voltage Variations meets and exceeds IEC 61000-4-11, Level 1 specifications.Other Regulatory Compliances:•Meets CE requirements•Complies with FCC Part 68 and EMC FCC Part 15EnvironmentalElectromagnetic Standards Compliance•EN 50081-2•EN 50082-2•IEC 61000-6-2 (immunity)•IEC 610000-6-4 (emission)Compliance / Regulatory•Meets CE requirements•Complies to IEEE and IEC standards•Complies with FCC Part 68 and EMC FCC Part 15 and CISPR 22 Class B•Operation ETS 300 019 Class 3.2•Storage ETS 300 019 Class 1.2•Transportation ETS 300 019 Class 2.3Dimensions – Teleprotection Unit– Trip Counter DisplayDimensionsOrdering InformationBASE UNIT without Network Interface and PSUs# Add IRIG-B / NTP /IEEE-1588v2 PTP Time Synchronization (Optional)# Add Network Interface# Add Power Supply Option# Specify Command Voltage^ Select SFP Option from below# Add Trip Counter Display - optional, if requiredNote 1: The Trip Counter Display and Alarm Extension Unit is an optional extra unit which interconnects with the main Teleprotection unit through an interconnecting cable (supplied with the TripCounter Display and Alarm Extension Unit).Note 2: The Trip Counter Display and Alarm Extension Unit may, or may not be ordered with the Teleprotection Equipment, depending upon the user requirements.# Add VCL-TP external feed-through terminal block panel optional, if requiredNote:Technical Specifications are subject to changes without notice.Headquarters: Phoenix, Arizona Orion Telecom Networks Inc. 20100, N 51st Ave, Suite B240, Glendale AZ 85308Phone: +1 480-816-8672Fax: +1 480-816-0115E-mail: **********************Regional Office: Miami, FloridaOrion Telecom Networks Inc. 4000 Ponce de Leon Blvd. Suite 470 Coral Gables, FL 33146Phone: + 1-305-777-0419Fax: + 1 786-536-4181E-mail: **********************。