(改)威步产品目录2011.03(1) ZLMICRO半导体品牌

JDF-2S/N 0005473 & UPILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts are subject to change without notice.BUNN-O-MATIC CORPORATION POST OFFICE BOX 3227SPRINGFIELD, ILLINOIS 62708-3227PHONE: (217) 529-6601 FAX: (217) 529-664438311.0000E 03/08 ©2005 Bunn-O-Matic Corporation DISCONTINUED VERSION Parts listed in this catalog may no longer be available.BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTYBunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows:1) All equipment other than as specified below: 2 years parts and 1 year labor.2) Electronic circuit and/or control boards: parts and labor for 3 years.3) Compressors on refrigeration equipment: 5 years parts and 1 year labor.4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first.These warranty periods run from the date of installation BUNN warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by BUNN or that, in BUNN’s judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair, damage or casualty. This warranty is conditioned on the Buyer 1) giving BUNN prompt notice of any claim to be made under this warranty by telephone at (217) 529-6601 or by writing to Post Office Box 3227, Springfield, Illinois 62708-3227; 2) if requested by BUNN, shipping the defective equipment prepaid to an authorized BUNN service location; and 3) receiving prior authorization from BUNN that the defective equipment is under warranty.THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF EITHER MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The agents, dealers or employees of BUNN are not authorized to make modifications to this warranty or to make additional warranties that are binding on BUNN. Accordingly, statements by such individuals, whether oral or written, do not constitute warranties and should not be relied upon.If BUNN determines in its sole discretion that the equipment does not conform to the warranty, BUNN, at its exclusive option while the equipment is under warranty, shall either 1) provide at no charge replacement parts and/or labor (during the applicable parts and labor warranty periods specified above) to repair the defective components, provided that this repair is done by a BUNN Authorized Service Representative; or 2) shall replace the equipment or refund the purchase price for the equipment.THE BUYER’S REMEDY AGAINST BUNN FOR THE BREACH OF ANY OBLIGATION ARISING OUT OF THE SALE OF THIS EQUIPMENT, WHETHER DERIVED FROM WARRANTY OR OTHERWISE, SHALL BE LIMITED, AT BUNN’S SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND.In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.BrewWISE, BUNN Gourmet Ice, BUNN Pour-O-Matic, BUNN, Bunn-OMatic, Bunn-O-Matic, BUNNlink, BUNNserve, BUNN Espress, DBC, Dr. Brew, Dual, EasyClear, EasyGard, Easy Pour, FlavorGard, Gourmet Ice, Gourmet Juice, High Intensity, IMIX, Infusion Series, Legendary for Quality, The Mark of Quality in Beverage Equipment Worldwide, My Café, Power-Logic, Safety-Fresh, Scale-Pro, Single, Smart Funnel, Smart Hopper, Soft Heat, SplashGard, System III, ThermoFresh, 392, AXIOM, Beverage Profit Calculator, Beverage Bar Creator, BrewLOGIC, BrewMETER, BrewWIZARD, BUNNSERVE, BUNNsource, Coffee At Its Best, Cool Froth, Digital Brewer Control, Intellisteam, Nothing Brews Like a BUNN, Pouring Profits, Pulse Wave, Quality Beverage Equipment Worldwide, Signature Series, Silver Series, Smart Heat, SmartWAVE, Tea At Its Best, The Horizontal Red Line, Titan, Ultra, are either trademarks or registered trademarks of Bunn-O-Matic Corporation.238311 020608TABLE OF CONTENTSMain Frame & Covers (4)Upper Cabinet & Panels (6)Refrigeration Components (8)Compressor Components (10)Fan Assembly (12)Water Tank Assy (14)Circulation Pump & Lines (18)Product Coil & Lines (20)Dispense Platform Assy (22)Dispense Valve Assy (24)Plain Water Manifold (Early Models) (26)Plain Water Manifold (Late Models) (28)Rinse Water Manifold & Solenoid (Early Models) (30)Rinse Water Manifold & Solenoid (Late Models) (34)Pump Assy (38)Bottle Adapter Assy (40)Door Assy (42)Electrical Components (46)Refillable Container Assy (50)Numerical Index (52)338311 111706438311 050807ITEM PART NO. QTY. DESCRIPTION5* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.MAIN FRAME & COVERS1 34409.0000 1 Base Frame Assy2 26528.0000 4 Leg 03996.0000 4 Pad, Non-skid3 34410.0000 1 Frame, Refridgeration - - - - - - - -4 Screw #10-32 x4 39428.0000* 2Bracket, Rear support (Late models with Water Inlet Valve)34797.0000* 2 Bracket, Rear support (Early models prior to Water Inlet Valve) 02332.0001 8 Screw, Crimptite #6 x .25"5 38469.0001* 1 Bracket, Upper Frame6 36192.1000 1 Panel w/Decals, Right (Includes item 11) 02332.0001 3 Screw, Crimptite #6 x .25"7 34786.1000 1 Panel w/Decals, Top (Includes item 8) 02332.0001 4 Screw, Crimptite #6 x .25"8 33458.0000 1 Decal, Refridgeration ON - OFF9 36191.1000 1 Panel w/Decals, Left (Includes items 10, 11, 12 & 24) 02332.0001 3 Screw, Crimptite #6 x .25"10 33461.0001 1 Decal, Refridgerant Charge11 27442.0000 2 Decal, Warning - Moving Parts12 00986.0002 1 Decal, Warning - Electrical13 39561.0001 1 Panel, Rear 02332.0001 4 Screw, Crimptite #6 x .25"14 33645.0000 1 Decal, Main Water Connection15 33646.0000 1 Decal, Rinse Water Connection (Early Models)16 00656.0000 1 Decal, Comply To Plumbing Code17 27354.0000 4 Bushing18 00668.0000 3 Plug19 35998.0001 1 Panel, Splash 01317.0003 2 Screw, Truss Head, Locking #8-32 x .38"20 21436.0000 2 Catch, Magnetic21 33538.0000*1 Bracket, Right33539.0000* 1 Bracket, Left 01311.0001 4 Screw, Truss Head, Locking #8-32 x .25"22 38765.1000 1 Drip Tray Assy (Includes strike plate and item 23)23 26801.0000 1 Grate, Drip Tray24 35277.0000 1 Schematic, Electrical38311 121207638311 111706ITEM PART NO. QTY. DESCRIPTION7* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.UPPER CABINET & PANELS1 35478.0000* 1 Cabinet (Not serviced) 24544.0000 10 Screw, Pan Head #8-182 34738.0000 1 Plate, Cabinet Mounting 01311.0001 4 Screw, Truss Head #8-32 x .25" Lkg.3 34784.0000 1 Plate, Bottom Closure 01359.0000 3 Screw, Flat Head #8-32 x .38"4 34362.0000 1 Bushing, Lower Hinge5 34790.0000 1 Wrap 01311.0001 4 Screw, Truss Head #8-32 x .25" Lkg.6 34785.0000* 1 Bracket, Hinge 01327.0000 3 Screw, Pan Head #10 -32 x .38"7 34666.0001 1 Catch, Door Latch 01382.0000 2 Screw, Truss Head #6 x .375"8 27394.0000 2 Plug9 00669.0002 4 Plug10 34419.0000 1 Coil, Water 24544.0000 4 Screw, Pan Head #8-1811 27246.0000 1 Sensor Assy, Temperature12 33669.0000 1 Clip, Adhesive Back13 33297.0000 1 Fan Assy. 03290.0000 1 Cable Tie 38616.0000 4 Screw, Pan Head #8-1814 34421.0000* 1 Cover, Fan 24544.0000 4 Screw, Hex Head w/Washer #10-2415 34422.1000 1 Shelf, Product (Includes items 16 & 17)16 33459.0003 2 Decal, Dispense/Rinse17 32461.0000 2 Gasket, Drip18 32455.0000 2 Knob19 27394.0000 2 Plug20 35930.0000 2 Nozzle21 32848.0000 2 O-ring22 35108.1000 2 Mixer, Spiral23 38519.0000 1 Decal, Dispense Ratio24 M2568.1000 - Grease, USDA H-1 (Use when assembling items 21 & 22)38311 121207838311 062905ITEM PART NO. QTY. DESCRIPTION9* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement. 1 35164.1000 1 Air Filter2 29951.0001 1 Condenser 02335.0001 4 Screw, Crimptite #8 x .38"3 35180.0001 1 Tube (Requires brazing to install) (Not serviced)4 35386.0001 1 Tube (Requires brazing to install) (Not serviced)5 00396.0002 1 Tee (Requires brazing to install) (Not serviced)6 35385.0001 1 Tube (Requires brazing to install) (Not serviced)7 35580.0001 1 Tube (Requires brazing to install) (Not serviced)8 35175.1000 1 Filter Dryer Assy (Requires brazing to install)9 35179.0001 1 Tube (Requires brazing to install) (Not serviced)10 32776.0000 1 Accumulator11 35581.0001 1 Tube (Requires brazing to install) (Not serviced)12 - - - - - - - - 1 Compressor (See COMPRESSOR COMPONENTS) 34529.0000* 4 Washer 00901.0000 4 Nut .25"-2013 - - - - - - - - 4 Grommet14 - - - - - - - - 4 Sleeve 15 33536.0000 1 Platform 01317.0003 4 Screw, Truss Head, Locking #8-32 x .38"16 - - - - - - - - 1 Fan Assy (See FAN ASSEMBLY) 27243.0000 3 Screw #8-36 x .437"17 34418.0000* 1 Bracket 01317.0003 4 Screw, Truss Head, Locking #8-32 x .38"18 28567.0000 1 Mounting Kit (Includes four each of items 13 & 14)19 M2332.1000 - Insulation, Tube 25/50 - 1.6"ID x .50" wall x 6.0 Ft (Use as required) 20 M2336.1000 - Insulation, Tube 25/50 - 0.25"ID x .19" wall x 6.0 Ft (Use as required)REFRIGERATION COMPONENTSOrder item 1838311 0303081038311 111706ITEMPART NO.QTY.DESCRIPTION11* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.COMPRESSOR COMPONENTS- 38231.1000 1 Compressor 120V (Includes items 1 - 5) 33522.1001 1 Compressor 230V (Includes items 1 - 5) 1 38897.0000 1 Relay, Compressor 120V 38897.0001 1 Relay, Compressor 230V 2 38917.0000 1 Overload Protector 3 38916.0000 1 Retainer 4 38918.0000 1 Clip 538896.00001Cover38311 1117061238311 062905ITEMPART NO.QTY.DESCRIPTION13* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.FAN ASSEMBLY- 32204.1001 1 Fan Assy 120V (Includes items 1-4) 32204.1002 1 Fan Assy 230V (Includes items 1-4) 1 33603.0000 1 Motor Assy 120V 33603.0001 1 Motor Assy 230V 2 33602.0000 1 Blade, Fan 3 27258.0000 1 Silencer 423700.00001Nut .25"-2038311 0629051438311 111706ITEMPART NO.QTY.DESCRIPTION15* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.WATER TANK ASSY1 35165.0000 1 Tank Assy - - - - - - - - 4 Screw2 35272.1001 1 Lid Assy 24544.0000 6 Screw, Pan Head #8-183 35526.0000* 2 Bracket 02332.0001 2 Screw, Crimptite #6 x .25" 01317.0003 2 Screw, Truss Head, Locking #8-32 x .38"4 34403.1001 1 Panel Assy 00973.0000 4 Nut, Keps #6-325 33801.0000 1 Grommet6 29327.0000 1 Probe, Temperature & Dry Plug7 33801.0002 1 Grommet 7 02536.0000 1 Grommet9 02645.1000 1 Probe, Liquid Level 01522.0000 1 Washer 20203.0100 1 Lockwasher, Internal-tooth #800908.0000 1 Nut #8-32 10 21275.0004 3 Clamp .54" - .64"11 20976.0062* 1 Tube, Silicone .38" ID x 1.75" (Order item 35) 1221275.0005 1 Clamp .62" - .73" 120V 21275.0009 1 Clamp .65" - .78" 230V 13 35077.0000 1 Tee .38" Sngl. Barb 14 21275.0003 4 Clamp .57" - .70"15 34325.0003* 1 Hose, Flex .38" ID x .625" OD x 3.0" (Order item 36) 16 33623.0000 2 Elbow .38" Barb17 34325.0006* 1 Hose, Flex .38" ID x .625" OD x 2.25" (Order item 36) 18 20976.0016* 1 Tube, Silicone .38" ID x 2.75" (Order item 35) 19 33068.0000 1 Fitting .38" Barb x .25" Barb20 37809.1000 1 Pump Assy 120V (Includes items 11 - 19) 37265.0000 1 Pump Assy 230V 21 35132.0000* 1 Product Coil22 34416.0000 2 Spacer 00973.0000 4 Nut, Keps #6-32 23 03290.0000 2 Cable Tie 2432734.00016Cable Tie, 28.0"(Continued)38311 0508071638311 111706ITEMPART NO.QTY.DESCRIPTION17* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.WATER TANK ASSY25 33533.0000* 4 Spacer 26 33519.0000* 1 Evaporator Coil 27 36448.0000 2 Spacer 28 03290.0000 2 Cable Tie29 33670.0004* 1 Tube, Clear .25" x 8.0" (Not serviced) 30 38605.0000 1 Tee31 21275.0006 1 Clamp .40" - .50" 32 35174.0000 1 Fitting 33 33149.0000 1 Gasket 34 00976.0000 1 Cap35 35106.0000 1 Manifold, Return Water36 20976.1000 1 Tube, Silicone .38" ID x 12.0" (Cut to required length) 20976.1001 1 Tube, Silicone .38" ID x 36.0" (Cut to required length) 20976.1002 1 Tube, Silicone .38" ID x 120.0" (Cut to required length) 37 34325.1000 1 Hose, Flex .38" ID x .625" OD x 12.0" (Cut to required length) 34325.1001 1 Hose, Flex .38" ID x .625" OD x 36.0" (Cut to required length)34325.10021Hose, Flex .38" ID x .625" OD x 120.0" (Cut to required length)38311 1117061838311 062905ITEMPART NO.QTY.DESCRIPTION19* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.1 - - - - - - - - 1 Coil, Upper Cabinet (See UPPER CABINET & PANELS)2 34325.0004* 2 Tube, Silicone .38" ID x 1.5" (Order item 10)3 21275.0003 8 Clamp .57" - .70"4 37850.0000 2 Elbow .38" Barb5 34325.0010* 1 Tube, Silicone .38" ID x 17.0" (Order item 10)6 34325.0021* 1 Tube, Silicone .38" ID x 8.0" (Order item 10)7 35173.0001 1 Fitting .312" Fl x .375" Barb8 35305.0000 1 Gasket9 - - - - - - - - 1 Manifold, Return Water (See WATER TANK ASSEMBLY) 10 34325.1000 - Tube, Silicone .38" ID x 12.0" (Cut to required length) 34325.1001 - Tube, Silicone .38" ID x 36.0" (Cut to required length) 34325.1002 - Tube, Silicone .38" ID x 120.0" (Cut to required length) 11M2337.1000-Tube Insulation (Cut to required length)CIRCULATION PUMP & LINES38311 1117062038311 111706ITEMPART NO.QTY.DESCRIPTION21* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.PRODUCT COIL & LINES1 - - - - - - - - 1 Product Coil (See WATER TANK ASSEMBLY)2 35305.0000 2 Gasket3 35173.0001 1 Fitting .312" Fl x .375" Barb4 21275.0003 8 Clamp .57" - .70"5 34325.0010* 1 Hose, Flex .38" ID x 17.0" (Order item 19)(Early models prior to Water Inlet Valve) 34325.0014* 1 Hose, Flex .38" ID x 15.0" (Order item 19)(Late models with Water Inlet Valve)6 33151.0004 1 Fitting, Elbow .38" Barb7 33149.0000 1 Gasket8 12757.0000 1 Nut9 01514.0000 1 Lockwasher 10 12756.0000 1 Fitting, Bulkhead11 35172.0001 1 Fitting, Elbow .312" Fl x .375" Barb 12 34325.0004* 1 Hose, Flex .38" ID x 1.5" (Order item 19) 13 37850.0000 1 Elbow .38" Barb14 34325.0012* 1 Hose, Flex .38" ID x 10.5" (Order item 19) 15 35171.0000 1 Valve, Shut Off 16 34540.0000 1 Decal, Caution - Close17 34325.0004* 1 Hose, Flex .38" ID x 1.5" (Order item 19) 18 34462.0000 1 Coupling, Quick Disconnect, Male19 34325.1000 1 Hose, Flex .38" ID x 12.0" (Cut to required length) 34325.1001 1 Hose, Flex .38" ID x 36.0" (Cut to required length) 34325.1002 1 Hose, Flex .38" ID x 120.0" (Cut to required length)20M2337.1000-Insulation, Tube 25/50 - 0.5"ID x .19" wall x 6.0 Ft (Use as required)38311 111706Early Models2238311 110107ITEMPART NO.QTY.DESCRIPTION23* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.DISPENSE PLATFORM ASSEMBLY1 38116.1000 1 Platform Assy (Includes items2 - 18) 2 - - - - - - - - 2 Pump Assy (See PUMP ASSY) 01338.0000 2 Screw, Truss Head #8-32 x .625" 01522.0000 4 Washer00991.0000 4 Nut, Elastic Lock #8-32 3 32957.0001 8 Bushing, Rubber 4 21275.0006 4 Clamp .40" - .50"5 38018.1000 2 Dispense Valve (See DISPENSE VALVE) 01308.0000 4 Screw, Truss Head #6-32 x 25"6 37786.0001 2 Plate 01308.0000 2Screw, Truss Head #6-32 x 25"7 - - - - - - - - 1 Manifold, Plain Water (See PLAIN WATER MANIFOLD) 8 - - - - - - - - 1 Manifold, Rinse Water (See RINSE WATER MANIFOLD) 9 32756.1000 2 Bottle Adapter (See BOTTLE ADAPTER) 01308.0000 4 Screw, Truss Head #6-32 x 25" 10 38122.0000* 1 Plate 01311.0001 4Screw, Truss Head #8-32 x .25" Lkg.11 32458.0000 2 Clip, Retainer 12 38104.0000 2 Thumbscrew 13 32454.0000 2 Fitting 1434087.00002O-ringThe following items are not illustrated 15 35189.0000 1 Harness, Dispense Platform 16 35181.0001 1 Harness, Dispense Valve 17 - - - - - - - - 4 Cable Tie (Not serviced) 1812422.00002Clamp38311 1101072438311 062905ITEMPART NO.QTY.DESCRIPTION25* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.DISPENSE VALVE ASSEMBLY- 38018.1000 1 Dispense Valve Assy (Includes items 1 - 24) 1 37801.0001 1 Body 2 37990.0000 1 Seal 3 37843.0000 1 Nozzle, Water4 32252.0000 1 Valve, Solenoid (Includes items5 - 10) 5 33554.0000 1 Solenoid Valve Coil6 28481.0000 1 Guide Kit (Includes Guide, Washer and O-ring)7 33585.0000 1 Solenoid Valve Base Kit (Includes O-ring and items 6 & 7) 8 01111.0002 1 Solenoid Valve Repair Kit (Includes Plunger, Spring and O-ring) 9 33580.0000 1 O-ring 10 33553.0000 1 O-ring11 37987.0000 1 Bracket 01308.0000 2 Screw #6-32 x .25" 12 32463.0000 1 Fitting, Elbow13 32849.0001 1 O-ring (Also use item 24) 14 37853.0000 1 Clamp 01308.0000 1 Screw #6-32 x .25" 15 32603.0000 1 Sleeve16 32852.0000 1 O-ring (Also use item 24) 17 32602.0000 1 Piston18 32853.0001 1 Spring, Flow Control 19 32624.0000 1 Bonnet, Adjuster 20 33725.0000 1 O-ring (Also use item 24) 21 32623.0000 1 Adjuster, Position 22 32851.0000 1 O-ring (Also use item 24) 23 37977.0000 1 Bracket, Water Adjustment 01308.0000 2 Screw #6-32 x .25"24M2568.1000-Grease, USDA H-1 (Use when assembling items 13,16,20 & 22)38311 1117062638311 111706ITEMPART NO.QTY.DESCRIPTION27* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.PLAIN WATER MANIFOLD (Early Models)1 32631.00002 Fitting, Straight 2 32849.0001 2 O-ring3 38129.0005* 2 Hose, Braided .25" ID x 2.25" (Order item 12)4 21275.0006 4 Clamp .40 - .50"5 36204.0000* 1 Manifold, Plain SST6 34325.0017* 1 Hose, Flex .38" ID x 1.25" (Order item 13)7 21275.0003 2 Clamp .57 - .70"8 34463.0000 1 Coupling, Quick Disconnect, Female12 38129.1000 1 Hose, Braided .25" ID x 12.0" (Cut to required length) 38129.1001 1 Hose, Braided .25" ID x 36.0" (Cut to required length) 38129.1002 1 Hose, Braided .25" ID x 120.0" (Cut to required length) 13 34325.1000 1 Hose, Flex .38" ID x 12.0" (Cut to required length) 34325.1001 1 Hose, Flex .38" ID x 36.0" (Cut to required length)34325.10021Hose, Flex .38" ID x 120.0" (Cut to required length)38311 1117062838311 111706ITEMPART NO.QTY.DESCRIPTION29* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.PLAIN WATER MANIFOLD (Late Models)38311 1117061 32631.00002 Fitting, Straight 2 32849.0001 2 O-ring3 38129.0012* 2 Hose, Braided .25" ID x 3.0" (Order item 8)4 21275.0006 6 Clamp .40 - .50"5 38605.0000 1 Tee .25" Barb6 38129.0013* 1 Hose, Braided .25" ID x 5.25" (Order item 8)7 34461.0000 1 Coupling, Quick Disconnect, Female8 38129.1000 1 Hose, Braided .25" ID x 12.0" (Cut to required length) 38129.1001 1 Hose, Braided .25" ID x 36.0" (Cut to required length)38129.10021Hose, Braided .25" ID x 120.0" (Cut to required length)3038311 111706RINSE WATER MANIFOLD & SOLENOID (Early Models) ITEM PART NO. QTY. DESCRIPTION1 32756.10002 Bottle adapter (See BOTTLE ADAPTER)2 38129.0001*3 Hose, Braided .25" ID x .44" OD x 1.50" (Order item 37)3 21275.0006 16 Clamp .40" - .50"4 36203.0000* 1 Manifold. Rinse SST5 34460.0000 1 Fitting, Quick Disconnect, Male6 34461.0000 1 Fitting, Quick Disconnect, Female7 32745.0021* 1 Hose .25" ID x .44" OD x 15.75" (Order item 38)8 33151.0005 3 Fitting, Elbow .25" Barb9 33149.0001 4 Gasket10 01085.0002 1 Solenoid Valve 120V (Includes items 11 - 14)28005.0000 1 Solenoid Valve 230V (Includes items 11- 13)01327.0000 2 Screw, Pan Head #10-32 x .38" 120V02308.0000 2 Screw, Pan Head #8-32 x .38" 230V11 28480.0000 1 Coil, Solenoid 120V28020.0000 1 Coil, Solenoid 230V12 01111.0002 1 Solenoid Repair Kit (Includes Plunger, Spring and O-ring)13 28479.0000 1 Solenoid Base Kit 120V (Includes O-ring)28021.0000 1 Core Assy Kit 230V14 28481.0000 1 Guide Kit15 00402.0001 2 Connector16 00425.0001 1 Nipple17 00425.0002 1 Nut18 38129.0001* 1 Hose, Braided .25" ID x .44" OD x 1.50" (Order item 37)19 00459.0000 1 Fitting, Bulkhead01532.0000 1 Lockwasher, Internal-toth .438"00463.0000 1 Nut, Hex .375"-2020 38129.0009* 1 Hose, Braided .25" ID x .44" OD x 4.25" (Order item 37)21 33149.0000 3 Gasket22 33151.0004 1 Fitting, Elbow .38" Barb23 21275.0003 4 Clamp .57" - .70"24 34325.0004* 1 Hose, Flex .38" ID x .595" OD x 1.5" (Order item 39)25 32749.0001 1 Tee .38" Barb x .38" Barb x .25" Barb(Continued)RINSE WATER MANIFOLD & SOLENOID (Early Models) ITEM PART NO. QTY. DESCRIPTION26 34325.0006* 1 Hose, Flex .38" ID x .595" OD x 2.25" (Order item 39)27 33150.0000 1 Nut28 33686.0000 1 Nipple29 23720.0000 1 Strainer Assy (Includes items 30 - 32)30 - - - - - - - - 1 Housing, Strainer (Order item 29)31 23721.0000 1 Screen32 23723.0000 1 End Cap33 21275.0006 2 Clamp .41 - .50"34 35573.0000* 1 Bracket, Rinse Solenoid (Early Models)01317.0003 2 Screw, Truss Head #8-32 x .38" Lkg35 32463.0000 2 Fitting, Elbow36 32849.0001 2 O-ring37 38129.1000 - Hose, Braided .25" ID x .44" OD x 12.0" (Cut to required length)38129.1001 - Hose, Braided .25" ID x .44" OD x 36.0" (Cut to required length)38129.1002 - Hose, Braided .25" ID x .44" OD x 120.0" (Cut to required length)38 32745.1002 - Hose .25" ID x .44" OD x 120.0" (Cut to required length)39 34325.1000 - Hose, Flex .38" ID x .595" OD x 12.0" (Cut to required length)34325.1001 - Hose, Flex .38" ID x .595" OD x 36.0" (Cut to required length)34325.1002 - Hose, Flex .38" ID x .595" OD x 120.0" (Cut to required length)ITEMPART NO.QTY.DESCRIPTIONRINSE WATER MANIFOLD & SOLENOID (Late Models)(Continued)1 32756.10002 Bottle adapter (See BOTTLE ADAPTER) 2 32849.0001 2 O-ring3 32463.0000 2 Fitting, Elbow4 38129.0009* 1 Hose, Braided .25" ID x 4.25" (Order item 40)5 21275.0006 8 Clamp .40" - .50"6 38129.0004* 1 Hose, Braided .25" ID x 3.50" (Order item 40)7 38605.0000 1 Tee .25" Barb8 38129.0001* 1 Hose, Braided .25" ID x 1.50" (Order item 40) 9 34460.0000 1 Fitting, Quick Disconnect, Male 10 34461.0000 1 Fitting, Quick Disconnect, Female11 32745.0021* 1 Hose .25" ID x 15.75" (Order item 39)(Early models prior to Water Inlet Valve) 38129.0014* 1 Hose .25" ID x 13.0" (Order item 40)(Late models with Water Inlet Valve) 12 01085.0002 1 Solenoid Valve 120V (Includes items 13 - 16) 28005.0000 1 Solenoid Valve 230V (Includes items 13- 15) 01327.0000 2 Screw, Pan Head #10-32 x .38" 120V02308.0000 2 Screw, Pan Head #8-32 x .38" 230V 1328480.0000 1 Coil, Solenoid 120V 28020.0000 1 Coil, Solenoid 230V14 01111.0002 1 Solenoid Repair Kit (Includes Plunger, Spring and O-ring) 15 28479.0000 1 Solenoid Base Kit 120V (Includes O-ring) 28021.0000 1 Core Assy Kit 230V 16 28481.0000 1 Guide Kit17 35573.0000* 1 Bracket, Rinse Solenoid (Early Models) 01317.0003 2 Screw, Truss Head #8-32 x .38" Lkg 18 00402.0001 1 Connector19 33151.0005 1 Fitting, Elbow .25" Barb 20 33149.0001 1 Gasket21 33152.0001 1 Fitting .38" Barb x .125" MPT22 34325.0022* 1 Hose, Flex .38" ID x 2.50" (Order item 41) 23 32750.0001 1 Tee .38" Single Barb24 34325.0021* 1 Hose, Flex .38" ID x 8.0" (Order item 41) 25 33686.0000 1 Nipple33150.00001NutRINSE WATER MANIFOLD & SOLENOID (Late Models) ITEM PART NO. QTY. DESCRIPTION26 21275.0003 5 Clamp .57" - .70"27 36203.0000* 1 Manifold. Rinse SST (Early Models)28 33149.0000 2 Gasket29 23720.0000 1 Strainer Assy (Includes items 30 - 32)30 - - - - - - - - 1 Housing, Strainer (Order item 29)31 23721.0000 1 Screen32 23723.0000 1 End Cap33 01533.0005 2 Spacer01326.0006 2 Screw, Truss Head #10-32 x .625"34 00464.0001 1 Elbow .25" Barb x .125"MPT35 34325.0004* 2 Hose, Flex .38" ID x 1.50" (Order item 41)36 35077.0000 1 Tee, Nylon .38" Barb37 36233.0000 1 Valve, Water Inlet 120V36233.0001 1 Valve, Water Inlet 230V32283.0000 2 Screw, Pan Head M4 x 6mm38 37297.0000 1 Elbow39 32745.1002 - Hose .25" ID x .44" OD x 120.0" (Cut to required length)40 38129.1000 - Hose, Braided .25" ID x .44" OD x 12.0" (Cut to required length)38129.1001 - Hose, Braided .25" ID x .44" OD x 36.0" (Cut to required length)38129.1002 - Hose, Braided .25" ID x .44" OD x 120.0" (Cut to required length) 41 34325.1000 - Hose, Flex .38" ID x .595" OD x 12.0" (Cut to required length)34325.1001 - Hose, Flex .38" ID x .595" OD x 36.0" (Cut to required length)34325.1002 - Hose, Flex .38" ID x .595" OD x 120.0" (Cut to required length)PUMP ASSEMBLYITEM PART NO. QTY. DESCRIPTION- 33803.1001 1 Pump Assy (Includes items 1 - 29)1 32613.1002 1 Motor Assy01322.0001 4 Screw #8-32 x 1.25"2 32654.0000 1 Magnet Hub01512.0000 1 Lockwasher, Internal-tooth #1001331.0004 1 Screw, Locking #10-32 x .50"3 33608.1000 1 Sensor, RPM02336.0000 2 Screw #4-40 x .38"4 07130.0000* 1 Cable Tie5 32957.0000 4 Bushing6 37152.0001 1 Mount Assy, Pump7 29904.0000 1 Insert, Well Nut #8-328 33781.0000 1 Gasket9 28755.0010* 1 Tube, Norprene .25" ID x 18.5" lg (Order item 17)10 32732.0000 1 Clamp .39"/.48"11 32656.0000 1 Fitting, Elbow .25" Barb x .38" Barb12 21275.0003 1 Clamp .57"/.70"13 34325.0019* 1 Hose, Flex .375" ID x 5.75" lg (Order item 18)14 28759.0000 1 Pump Assy. (Includes items 15 & 16)15 28794.0000 1 Rotor16 01370.0001 4 Screw, Pan Head #8-32 x 2.45"17 28755.1000 - Tube, Neoprene .25" ID x .45" OD x 12.0" (Use as required)28755.1001 - Tube, Neoprene .25" ID x .45" OD x 36.0" (Use as required)28755.1002 - Tube, Neoprene .25" ID x .45" OD x 60.0" (Use as required) 18 34325.1000 - Hose, Flex .375" ID x 12.0" (Use as required)34325.1001 - Hose, Flex .375" ID x 36.0" (Use as required)34325.1002 - Hose, Flex .375" ID x 120.0" (Use as required)19 39689.0000 - Pump Tube (Includes items 9,10,11,12 & 13)。

接线图Micro800™ 非隔离型单极模拟量输出功能性插件模块产品目录号2080-OF2/idc/groups/literature/documents/wd/208 0-wd004_-mu-p.pdfFR Cette publication est disponible en français sous forme électronique (fichier PDF).Pour la télécharger, rendez-vous sur la page Internet indiquée ci-dessus.IT Questa pubblicazione è disponibile in Italiano in formato PDF. Per scaricarla collegarsi al sito Web indicato sopra.DE Diese Publikation ist als PDF auf Deutsch verfügbar. Gehen Sie auf die oben genannte Web-Adresse, um nach der Publikation zu suchen und sie herunterzuladen.ES Esta publicación está disponible en español como PDF. Diríjase a la dirección web indicada arriba para buscar y descarga esta publicación.PT Esta publicação está disponível em portugués como PDF. Vá ao endereço web que aparece acima para encontrar e fazer download da publicação.ZHZC2 Micro800™ 非隔离型单极模拟量输出功能性插件模块出版物 2080-WD004A-ZH-P - 2010年9 月环境和机柜防止静电放电本设备适用于在污染等级 2 工业环境、过电压 II 类应用中使用 (如 IEC 60664-1 所定义)，在海拔高达 2000 米 (6562 英尺) 时不降额。

编号功能用途ICE2000MPLAB ICE POD MPLAB ICE 2000 Universal Emulator Pod KitICE4000MPLAB ICE POD MPLAB ICE 4000 Emulator Pod KitPCM12XB0Processor Module PIC12F629, 675 Processor ModulePCM12XC0Processor Module PIC12F683 Processor ModulePCM16XA0Processor Module PIC12C50X, CE51X, PIC16C505, 52, 54, 54A, 54B, 55, 55A, 56, 56A, 57, 5 PCM16XH2Processor Module PIC16F83, F84, F84A Processor ModulePCM16XK1Processor Module PIC16F87X Processor Module w/ RTMRPCM16XP1Processor Module PIC16F627, 628 Processor ModulePCM16XR1Processor Module PIC16F870, 871 Processor ModulePCM16XS2Processor Module PIC16F7X Processor Module w/ RTMRPCM16XV0Processor Module PIC16F877A,876A,874A,873A,872A,871A,870A Processor ModulePCM16YD0Processor Module PIC16F630, 676 Processor ModulePCM16YE0Processor Module PIC16F818, 819 Processor ModulePCM16YF0Processor Module PIC16F627A, 628A Processor ModulePCM16YG0Processor Module PIC16F87/88 Processor ModulePCM16YH0Processor Module PIC16F777, 767, 747, 737 Processor ModulePCM16YJ0Processor Module PIC16F716 Processor ModulePCM16YK0Processor Module PIC16F684 Processor ModulePCM16YL0Processor Module PIC16F688 Processor ModulePCM16YM0Processor Module PIC12F635, 16F636 Processor ModulePCM16YN0Processor Module PIC16F785 Processor ModulePCM16YP0Processor Module PIC16F913, 914, 916, 917 Processor ModulePCM16YQ0Processor Module PIC16F685, 688, 689, 690 Processor ModulePCM16YR0Processor Module PIC16F88x Processor ModulePCM18XD1Processor Module PIC18F248, 258, 448, 458 Processor ModulePCM18XH3Processor Module PIC18F242, 252, 442, 452, 2220, 2320, 4220, 4320 Processor Module PCM18XJ1Processor Module PIC18F1320, 1220 Processor ModulePCM18XK1Processor Module PIC18F8680, 6680, 8565, 6585, 6621, 6525, 8621, 8525 Processor Module PCM18XL0Processor Module PIC18F4431, 4331, 2431, 2331 Processor ModulePCM18XN1Processor Module PIC18F4525, 4515, 2525, 2515 Processor ModulePCM18XP1Processor Module PIC18F4580/4680/2680/4681/2681 Processor ModulePCM18XQ2Processor Module PROCESSOR MODULE PIC18F8490PCM18XR1Processor Module PIC18F4550/2550/4455/2455 Processor ModulePCM18XS1Processor Module PIC18F8722/8627/6722/6627 Processor ModulePCM18XT0Processor Module PIC18F4685 Processor ModulePG164120PICkit 2PICkit 2 Microcontroller ProgrammerAC002012Power Supply ICSP (AC004004) Power SupplyAC002013Power Supply PICDEM MC LV Power SupplyAC002021Cable MPLAB PM3 ICSP CableAC004004SOCKET ICSP Programming Socket Module for PRO MATE IIAC124001SOCKET PIC12C50X, 50XA, 51X, 67X, CE67X, 16C505(DIP) DIP/SOIC (208 mil) PR AC124002SOCKET RFPIC12CXXX, 18SOIC / 20 SSOP Socket ModuleAC162039Power Supply Power Supply PICSTART Plus (DV003001) / PROMATE II (DV007003) / IC AC162048Pw Supply/Cable PICSTART Plus / PRO MATE II / ICD2 -Power Supply & RS-232 Cable AC162049Programmer Universal Programming Module for ICD 2AC162050Header MPLAB ICD 2 Header Interface (8 PDIP) for PIC12F629/675 ICD 2AC162051Header Header Interface (28/40 PDIP) for ICD and ICD 2 debuggersAC162052Header MPLAB ICD 2 Header Interface (14 PDIP) for PIC16F676/630 ICD 2AC162053Header MPLAB ICD 2 Header Interface for PIC16F627A, 628A, 648A (18 PDIP) AC162054Header MPLAB ICD 2 Header Interface for PIC16F716 (18 PDIP)AC162055Header MPLAB ICD 2 Header Interface for PIC16F684 (14 PDIP)AC162056Header MPLAB ICD 2 Header Interface for PIC16F688 (14 PDIP)AC162057Header MPLAB ICD 2 Header Interface for PIC12F635, 16F636 (14 PDIP)AC162058Header MPLAB ICD 2 Header Interface for PIC12F683AC162059Header MPLAB ICD 2 Header Interface for PIC10F200/202/204/206, 12F508/509, 1 AC162060Header MPLAB ICD 2 Header Interface for PIC16F785 (20P)AC162061Header MPLAB ICD 2 Header Interface for PIC16F690 (20P)AC162062Header MPLAB ICD 2 Header Interface for PIC18F87J10 (64/80P)AC162064Header MPLAB ICD 2 64/80/100P TQFP HEADER (PIC18F97J60)AC162066Header MPLAB ICD 2 Header Interface for PIC16F639 (20P)AC162067Header MPLAB ICD 2 40/28P DIP PIC18F45J10AC162069Cable MPLAB ICD 2 Breadboard CableAC162070Header MPLAB ICD 2 Header Interface for 8/14P PIC10F, PIC12F508/9, PIC16F50 AC162074Header MPLAB ICD 2 44P HEADER (PIC18F45J10) TQFPAC162078Header MPLAB ICD 2 Header Interface for PIC18F1330AC162079Header MPLAB ICD 2 64/80L HEADER PIC18F85J90AC162083Header MPLAB ICD 2 8L/14L HEADER PIC16F616AC162087Header MPLAB ICD 2 68/84TQFP HEADER (PIC18F87J50)AC162088Header MPLAB ICD 2 PIC24FJ64GA004 28P HeaderAC162091Header MPLAB ICD 2 64/80P HEADER PIC18F87J11AC162094Header MPLAB ICD 2 PIC24FJ64GA004 44P HeaderAC162096Header MPLAB ICD 2 8L/14L HEADER PIC16F526AC163020PICkit PIC10F Programmer Adapter (SOT-23)AC163020-2PICkit PIC12F Programmer Adapter (2x3 DFN)AC163021PICkit6L SOT-23 to 8P DIP Adapter KitAC163022PICkit PIC12F 2x3 DFN Programmer AdapterAC163027-1PICDEM PICDEM Z MotherboardAC163027-4PICDEM PICDEM Z 2.4GHz Daughter Card (MCHP solution)AC163028PICDEM MRF24J40MA PICDEM Z 2.4GHz RF BoardAC163029Cable Multi-colored 5" jumper wire setAC164012SOCKET PIC16C62, 63, 64, 65, 66, 67, 642, 662, 72, 73, 74, 745, 76, 765, 77, 773, 7 AC164020SOCKET PIC16C64, 65, 662, 67, 74, 765, 77, 774, F871, 874, 877, 18C4X2 TQFP P AC164021SOCKET PIC16C62, 63A, 72, 73B, 745, 773, F870 SSOP PRO MATE II Socket Mod AC164031Adapter Adapter 28L QFN to 28L DIP for PICSTART Plus & PROMATE II w/AC1640 AC164032Adapter Adapter 8L DFN to 8L DIP for PICSTART Plus & PROMATE II w/AC16401 AC164033Adapter Adapter 28L QFN to 18L DIP for PICSTART Plus & PROMATE II w/AC1640 AC164101rfPICkit 1rfPIC 433 Mhz TransmitterAC164102rfPICkit 1rfPIC 315 Mhz TransmitterAC164103rfPICkit 1rfPIC 433 Mhz ReceiverAC164104rfPICkit 1rfPIC 315 Mhz ReceiverAC164105rfPICkit 1rfPIC 433 Mhz Receivers (Pack of 5)AC164106rfPICkit 1rfPIC 315 Mhz Receivers (Pack of 5)AC164110Cable RJ-11 to ICSP AdapterAC164111Adapter Kit PM3 ICSP to RJ-11 AdapterAC164112Header MPLAB ICD 2 8L/14L HEADER PIC16F526AC164120PICkit 1PICkit Signal Analysis BoardAC164121PICtail Ethernet PICtail Daughter BoardAC164122PICtail PICtail Daughter Board for SD & MMC cardsAC164123PICtail Ethernet PICtail Daughter Plus BoardAC164124PICtail IrDA PICtail Plus Daughter BoardAC164125PICtail Speech Playback PICtailAC164126PICtail PICtail Plus Prototype Daughter BoardAC164127PICtail Graphics PICtail Plus Daughter BoardAC164128dsPICdemo dsPICDEM Motor Control PICtail Plus (dsPIC33 devices)AC164129dsPICdemo Audio PICtail Plus Daughter BoardAC164130PICtail ECAN/LIN PICtail Plus Daughter BoardAC164131PICDEM USB PICtail Plus Daughter BoardAC164133dsPICdemo dsPIC Buck Boost PICtail Plus Daughter BoardAC164134PICDEM MRF24J40MA PICTail Plus 2.4GHz RF CardAC164301SOCKET18L/28L/40L DIP Socket Module for MPLAB PM3AC164302SOCKET16L (.150"), 18L, 28L (.300") SOIC Socket Module for MPLAB PM3 AC164303SOCKET64L TQFP Socket Module for MPLAB PM3AC164305SOCKET44L TQFP Socket Module for MPLAB PM3AC164306SOCKET20L TSSOP Socket Module for MPLAB PM3AC164307SOCKET28L SSOP Socket Module for MPLAB PM3AC164308SOCKET68L PLCC Socket Module for MPLAB PM3AC164309SOCKET44L PLCC Socket Module for MPLAB PM3AC164310SOCKET84L PLCC Socket Module for MPLAB PM3AC164311SOCKET44L MQFP Socket Module for MPLAB PM3AC164312SOCKET16L (.208") SOIC Socket Module for MPLAB PM3AC164313SOCKET64L PF (14x14) Socket Module for MPLAB PM3AC164314SOCKET80L PF (14x14) Socket Module for MPLAB PM3AC164315SOCKET44L TQFP Socket Module for PIC17C44 for MPLAB PM3AC164316SOCKET44L MQFP Socket Module for PIC17C44 for MPLAB PM3AC164317SOCKET44L PM3 Socket Module for PIC17C44 for MPLAB PM3AC164318SOCKET84L PLCC Socket Module for PIC17C7XX for MPLAB PM3AC164319SOCKET64L TQFP Socket Module for MPLAB PM3AC164320SOCKET80L TQFP Socket Module for MPLAB PM3AC164321SOCKET6L SOT-23 Socket Module for PIC10F for MPLAB PM3AC164322SOCKET28/44L QFN Socket Module for MPLAB PM3AC164323SOCKET100L TQFP Socket Module for MPLAB PM3AC164324SOCKET8L DFN/16L QFN Socket Module for MPLAB PM3AC164325SOCKET8L MSSOP Socket Module for MPLAB PM3AC164326SOCKET PM3 20L QFN SOCKET MODULEAC164327SOCKET64L TQFP Socket Module for MPLAB PM3AC164328SOCKET80L TQFP Socket Module for MPLAB PM3AC164329SOCKET PM3 40P DIP SOCKET MODULE (18F45J10) for MPLAB PM3AC164330SOCKET PM3 44P TQFP SOCKET MODULE (18F45J10) for MPLAB PM3 AC164331SOCKET PM3 28P SSOP SOCKET MODULE (18F45J10) for MPLAB PM3 AC164332SOCKET PM3 28P SOIC SOCKET MODULE (18F45J10) for MPLAB PM3 AC164333SOCKET PM3 Socket Module for 100L QFP 12x12mm BodyAC164335SOCKET MPLAB PM3 Socket Module for 44L TQFP 10x10 (24Js devices) AC164336SOCKET MPLAB PM3 Socket Module for PIC24F 28/44L QFN devicesAC164337SOCKET MPLAB PM3 Socket Module for 40L DIP (24J devices)AC164338SOCKET PM3 Socket Module for PIC24F/dsPIC33F 28L SOICAC164339SOCKET MPLAB PM3 Socket Module for 28L SOIC (24J devices)AC164350SOCKET PROMATE II to MPLAB PM3 Socket Module AdapterAC174007SOCKET PIC17C75X, 18C658 PLCC PRO MATE II Socket Module 68 LD AC174011SOCKET PIC17C76X, 18C858 TQFP PRO MATE II Socket Module 80 LD AC174012SOCKET PIC17C76X, 18C858 PLCC PRO MATE II Socket Module 84 LD AC244001Header MPLAB REAL ICE ICSP HeaderAC244002REAL ICE REAL ICE Performance PakAC244003Header MPLAB REAL ICE Tester ModuleAC244006REAL ICE MPLAB REAL ICE TRACE INTERFACE BOARD KITAC244022Header Processor Extension Pak for PIC24FJ128GA010-ICEAC300020dsPICdemo Motor, 24V BLDCAC300021dsPICdemo Motor, 3-phase ACIMAC320002PICDEM PIC32 Starter Board to Explorer 16 PIM AdapterACICE0103Power Supply MPLAB ICE 2000 Power SupplyACICE0104Logic Probes MPLAB ICE 2000 Logic ProbesACICE0105Cable MPLAB ICE 2000 Parallel CableACICE0106Tripod MPLAB ICE 2000/4000 TripodACICE0107Cable MPLAB ICE 2000 Flex CableACICE0108ICE2000ICE2000 USB/Parallel AdapterACICE0201Adapter Plug8PDIP 300 mil adapter plugACICE0202Adapter Plug18PDIP 300 mil adapter plugACICE0203Adapter Plug20PDIP 300 mil adapter plugACICE0204Adapter Plug28PDIP 300 mil adapter plugACICE0206Adapter Plug40PDIP 600 mil adapter plugACICE0207Adapter Plug14PDIP 300 mil adapter plugACICE0401Power Supply Power Supply for MPLAB ICE 4000, MPLAB PM3ACICE0402Logic Probes MPLAB ICE 4000 Logic ProbeACICE0407Cable MPLAB ICE 4000 Flex CableAPGAC011Automotive PKE Transponder for APGRD001 Reference DesignAPGAC031Automotive Accessory Kit for APGRD003APGDT001Automotive LIN Serial AnalyzerAPGRD001Automotive PIC16F639-based Passive Keyless Entry Reference DesignAPGRD002Automotive Window Lift with Anti-Pinch Reference DesignAPGRD003Automotive Tire Pressure Monitoring System (TPMS) Reference DesignDAF18-4Device Adapter PIC18F 18L/28L/40L ICE4000 Device Adapter . Replacing DAF18-2.DAF18-5Device Adapter PIC18F 44L ICE4000 Device Adapter. Replacing DAF18-3.DAF18-6Device Adapter PIC18F 64L/80L ICE4000 Device Adapter. Replacing DAF18-1.DAF30-2Device Adapter dsPIC30F 64L/80L TQFP/PLCC ICE4000 Device AdapterDAF30-3Device Adapter dsPIC30F 44L TQFP ICE4000 Device AdapterDAF30-4Device Adapter dsPIC30F 18L/28L/40L DIP ICE4000 Device AdapterDM163011PICDEM PICDEM CAN-LIN 2 for PIC18FXX8DM163014PICDEM PICDEM 4 Demo Board for PIC12F629, 675, PIC16F630, 676, 684, 627A, 6 DM163015PICDEM PICDEM CAN-LIN 3DM163022PICDEM PICDEM 2 Plus 'PIC16C62, 63, 64, 65, 66, 67, 72, 73, 74, 76, 77, 87X, 773 DM163024PICDEM 2 Demo BoardDM163025PICDEM PICDEM FS USB Demo BoardDM163026PICDEM Low Power Solutions Demo BoardDM163027-4PICDEM PICDEM Z MRF24J40 2.4 GhZ Dev KitDM163027-5PICDEM PICDEM Z MRF24J40 2.4 GhZ Dev KitDM163029PICDEM PICDEM MechatronicsDM163030PICDEM PICDEM LCD 2 Development Kit, replacing DM163028DM164120-1PICkit 2PICkit 2 Low Pin Count Demo BoardDM164120-2PICkit 2PICkit 2 44-Pin Demo BoardDM164120-3PICkit 2PICkit 2 28-Pin Demo BoardDM164120-4PICkit 2PICkit 2 18-Pin Demo BoardDM164120-5PICkit 2PICkit 2 64/80-Pin Demo BoardDM164123PICDEM PICDEM System Management Board (with PICkit Serial Analyzer)DM164124PICkit 2PIC18F4xK20 Starter KitDM164125PICkit 2PICDEM Touch Sense 1 with PICkit SerialDM164128PICkit 2PICDEM Touch Sense 2DM183021PICDEM PICDEM MC LV Development BoardDM183022PICDEM PICDEM HPC Explorer BoardDM183023PICDEM ZENA Network AnalyzerDM183032PICDEM PICDEM PIC18 Explorer BoardDM183033PICDEM Internet Radio Demo BoardDM183034PICDEM Qwik & Low BoardDM240001PICDEM PICDEM PIC24/dsPIC33 Explorer 16 KitDM240002PICDEM Explorer 16 44-Pin KitDM240011PICdemo MPLAB Starter Kit for PIC24F MCUDM300004-1dsPICdemo 1 Demo Board (FCC/JATE PSTN Support, Ethernet NIC Su DM300004-2dsPICdemo 2 Demo Board (CTR-21 PSTN Support, Ethernet NIC Suppo DM300018dsPICdemo dsPICDEM 2 Demo BoardDM300019dsPICdemo dsPICDEM 80L Starter Demo BoardDM300020dsPICdemo dsPICDEM MC1 Motor Control Development BoardDM300021dsPICdemo dsPICDEM MC1H 3-Phase High Voltage Power ModuleDM300022dsPICdemo dsPICDEM MC1L 3-Phase Low Voltage Power ModuleDM300023dsPICdemo dsPICDEM SMPS Buck Demo BoardDM300024dsPICdemo dsPICDEM 1.1 Plus General Purpose Demo BoardDM300027dsPICdemo16-bit 28-PIN Starter Demo BoardDM303006HCS DEM General Purpose Keeloq Evaluation Kit (replaces DM303002)DM320001PICDEM PIC32MX Starter KitDM320002PICDEM PIC32 I/O Expansion BoardDM320003PICDEM PIC32 USB Starter BoardDM330011dsPICdemo MPLAB Starter Kit for dsPIC DSCDM330021dsPICdemo dsPIC33 MC LV Demo KitDS00161Technical Library CD-ROMPMF18WC2Processor Module PIC18F2X2, 4320, 2320, 4220, 2220 Processor ModulePMF18WD1Processor Module PIC18F1320/1220 (18C03) Processor ModulePMF18WE1Processor Module PIC18F8680 (18C03) Processor ModulePMF18WF0Processor Module PIC18F2X70/4X70 Processor ModulePMF18WH0Processor Module PIC18F4420, 4410, 2420, 2410, 4525, 4515, 2525, 2515, 4620, 4610, 2620 PMF18WJ1Processor Module PIC18F4580, 4680, 2680, 4681, 2681 ICE4000 Processor ModulePMF18WK0Processor Module PIC18F8490, 6490, 8410, 6410, 8390, 8310 ICE4000 Processor Module PMF18WL0Processor Module PIC18F4550/2550/4455/2455 ICE4000 Processor ModulePMF18WS0Processor Module PIC18F8722 ICE 4000 Processor ModulePMF30XA1Processor Module dsPIC30F ICE4000 Processor ModuleXLT06SOT Transition Socket14P DIP TO 6P Small Outline Transition SocketXLT08DFN2Transition Socket14P DIP to 8P DFN Transition SocketXLT08SN-1Transition Socket8P DIP TO 8P SOIC (8SN) Transition SocketXLT08SO-1Transition Socket8 LD (150 & 208 mil SOIC) Small Outline Transition SocketXLT14SO-1Transition Socket14 LD (150 & 208 mil SOIC) Small Outline Transition SocketXLT14SS-1Transition Socket14 LD PDIP to 4.4mm TSSOP Transition SocketXLT16QFN1Transition Socket14P DIP to 16LD QFN Transition SocketXLT18SO-1Transition Socket18 LD (300 mil SOIC) Small Outline Transition SocketXLT20QFN-1Transition Socket20P DIP to 20L QFN TargetXLT20SO1-1Transition Socket ADAPTER KIT, 20P DIP TO 20P SOICXLT20SS-1Transition Socket20 LD (209 mil SS) 20 LD Header Shrink Small Outline Transition Socket XLT20SS1-1Transition Socket20P DIP to 20L SSOP TargetXLT28QFN3Transition Socket28 LD QFN to 18 LD DIP Transition SocketXLT28QFN4Transition Socket28 LD QFN Transition SocketXLT28SO-1Transition Socket28 LD (300 mil SOIC) Small Outline Transition SocketXLT28SS-1Transition Socket ADAPTER KIT, 28P DIP TO 28P SSOPXLT28SS2-1Transition Socket28 LD (209 mil SSOP) Small Outline Transition Socket for PIC16C55, 55A, XLT44L2Transition Socket44L PLCC Transition Socket ICE4000 DAF18-3 PIC18F452/442XLT44PT3Transition Socket44 LD Plastic Quad Flatpack (PQFP) and Thin Quad Flatpack (TQFP) Tran XLT44QFN2Transition Socket44L QFN to 40L DIP Transition SocketXLT44QFN3Transition Socket28L DIP to 44L QFN Transition Socket (dsPIC30F3013)XLT44QFN4Transition Socket28L DIP to 44L QFN Transition Socket (dsPIC30F3010 & dsPIC30F4012) XLT44QFN5Transition Socket18L DIP to 44L QFN Transition Socket (dsPIC30F3012)XLT64PT4Transition Socket64P QFP ADPTR KIT (0.80mm)XLT64PT5Transition Socket64 LD Plastic Thin Quad Flatpack (TQFP) Transition Socket for PIC17C75X XLT80PT2Transition Socket80 LD Plastic Thin Quad Flatpack (TQFP) Transition Socket (.65 mm pitch) XLT80PT3Transition Socket80 LD Plastic Thin Quad Flatpack (TQFP) Transition Socket for PIC18C801 SW006011Software C Compiler for PIC18 devicesSW006012Software C Compiler for PIC24, dsPIC30F, dsPIC33F devicesSW006013Software C Compiler for dsPIC30F, dsPIC33F DSCSW006014Software C Compiler for PIC24 MCUSW006015Software C Compiler for PIC32 devicesSW163051Software XTEA Battery AuthenticationSW183052Software Zena 2.0 CDSW300001Software Digital Filter DesignSW300001-LT S oftware Digital Filter Design LiteSW300003Software dsPIC30F V.32 (non-trellis) Soft Modem Library up to 5K unitsSW300003-EV Software dsPIC30F V.32 (non-trellis) Soft Modem Library-Eval CopySW300004Software dsPIC30F V.32 (non-trellis) Soft Modem Library up to 25K unitsSW300005Software dsPIC30F V.32 (non-trellis) Soft Modem Library up to 100K unitsSW300010Software dsPIC30F Speech Recognition Library up to 5K unitsSW300010-EV Software dsPIC30F Speech Recognition Library-Eval CopySW300011Software dsPIC30F Speech Recognition Library up to 25K unitsSW300012Software dsPIC30F Speech Recognition Library up to 100K unitsSW300031Software CMX-RTX Fully Preemptive RTOS for dsPIC30SW300032Software CMX-Tiny+ Preemptive RTOS for dsPIC30Software Noise Suppression Library - for license up to 100,000 devicesSW300040-100Software Noise Suppression Library - for license up to 25,000 devicesSW300040-25KSW300040-5K S oftware Noise Suppression Library - for license up to 5,000 devicesSW300040-EV Software Noise Suppression Library - Evaluation CopySW300050-100Software Symmetric Key Embedded Encryption Library - for license up to 100K devicSoftware Symmetric Key Embedded Encryption Library - for license up to 25K device SW300050-25KSW300050-5K S oftware Symmetric Key Embedded Encryption Library - for license up to 5K devices SW300050-EV Software Symmetric Key Embedded Encryption Library - Evaluation CopySW300052Software AES and Triple-DES Encryption Libraries (128-bit key)Software Asymmetric Key Embedded Encryption Library - for license up to 100K dev SW300055-100Software Asymmetric Key Embedded Encryption Library - for license up to 25K devic SW300055-25KSW300055-5K S oftware Asymmetric Key Embedded Encryption Library - for license up to 5K device SW300055-EV Software Asymmetric Key Embedded Encryption Library - Evaluation Copy Software Acoustic Echo Cancellation Library - for license up to 100K devicesSW300060-100SW300060-25KSoftware Acoustic Echo Cancellation Library - for license up to 25K devicesSW300060-5K S oftware Acoustic Echo Cancellation Library - for license up to 5K devicesSW300060-EV Software Acoustic Echo Cancellation Library - Evaluation CopySW300070-100Software Speech Encoding/Decoding Library - for license up to 100K devicesSoftware Speech Encoding/Decoding Library - for license up to 25K devicesSW300070-25KSW300070-5K S oftware Speech Encoding/Decoding Library - for license up to 5K devicesSW300070-EV Software Speech Encoding/Decoding Library - Evaluation CopySoftware Line Echo Cancellation Library - for license up to 100K devicesSW300080-100Software Line Echo Cancellation Library - for license up to 25K devicesSW300080-25KSW300080-5K S oftware Line Echo Cancellation Library - for license up to 5K devicesSW300080-EV Software Line Echo Cancellation Library - Evaluation CopySoftware dsPIC DSC G.726A Speech Encoding/Decoding Library - for license up to 1 SW300090-100Software dsPIC DSC G.726A Speech Encoding/Decoding Library - for license up to 2 SW300090-25KSW300090-5K S oftware dsPIC DSC G.726A Speech Encoding/Decoding Library - for license up to 5 SW300090-EV Software dsPIC DSC G.726A Speech Encoding/Decoding Library - Evaluation Copy MA180011PICDEM PIC18F25J10 28L SOIC Plug-in ModuleMA180012PICDEM PIC18LF25J10 28L SOIC Plug-in ModuleMA180013PICDEM PIC18F45J10 44L TQFP Plug-in ModuleMA180014PICDEM PIC18LF45J10 44L TQFP Plug-in ModuleMA180015PICDEM PIC18F87J10 Plug-in ModuleMA180016PICDEM PICDEM HPC Blank Plug-in ModuleMA180019PICDEM PICDEM LCD 2 PIM PACK, replacing MA160011, used with DM163030MA180020PICDEM PIC18F87J11 PIM FOR HPC EXPMA180021PICDEM PIC18F87J50 FS USB PIMMA180022PICDEM PICDEM LCD 2 85J90 Plug-in ModuleMA240011PICDEM PIC24 100P to 100P QFP Plug-In ModuleMA240012PICDEM PIC24H 100P to 100P QFP Plug-in ModuleMA240013PICDEM PIC24 44-Pin Plug-in ModuleMA240014PICDEM PIC24F USB Plug In ModuleMA240015PICDEM PIC24F GA Plug In ModuleMA300014dsPICdemo dsPIC30F 80L QFP Plug In Sample (6014A). Used in DM30004-1, DM3000 MA300015dsPICdemo dsPIC30F 80L QFP Plug In Sample (6010A).MA300016dsPICdemo dsPICDEM 80-PIN TQFP PIM (dsPIC30F2023)MA320001PICDEM PIC32MX 100P QFP TO 100P PLUG IN MODULEMA320002PICDEM PIC32MX USB Plug In ModuleMA330011dsPICdemo dsPIC33F GP 100P to 100P QFP Plug In Module (100-pin dsPIC33FJ256G MA330012dsPICdemo dsPIC33F GP 100P to 84P QFP Plug In Module (100-pin dsPIC33FJ256GP MA330013dsPICdemo dsPIC33F MC 100P to 100P TQFP Plug In Module (100-pin dsPIC33FJ256 MA330014dsPICdemo dsPIC33 MC 28P TO 100P QFP PIM (28-Pin dsPIC33FJ12MC202-I/ML) MA330015dsPICdemo dsPIC33 GP 28P QFN to 100P PIM (28-pin dsPIC33FJ12GP202-I/ML)MA330016dsPICdemo dsPIC33F GP 44P QFN TO 100P PIM (dsPIC33FJ32GP204)MA330017dsPICdemo dsPIC33F GP 44P QFN TO 100P PIM (dsPIC33FJ32MC204)MA330018dsPICdemo dsPIC33F MC 44P QFN TO 100P PIM (dsPIC33FJ128MC804)MA330019dsPICdemo dsPIC33F MC 44P QFN TO 100P PIM (dsPIC33FJ128GP804)DV003001PICSTART Plus PICSTART supporting PIC12CXXX, 14000, 16C5X, 16C6X, 16CXXX, 16C7 DV007004MPLAB PM3Production Programmer/Development Kit with built-in ICSP.DV164005MPLAB ICD 2MPLAB In-Circuit Debugger 2 Module (ICD 2 Module and USB cable)DV164006MPLAB ICD 2MPLAB In-Circuit Debugger 2 Evaluation Kit (ICD 2 Module, USB & RS232 DV164007MPLAB ICD 2MPLAB In-Circuit Debugger 2 Module ws (ICD 2 Module, USB & RS232 cab DV164027MPLAB ICD 2MPLAB In-Circuit Debugger 2 Module with DM300027DV164032MPLAB ICD 2MPLAB ICD 2 with dsPICDEM 1.1 Demo BoardDV164033MPLAB ICD 2Explorer 16 Kit: MPLAB ICD 2 with Explorer 16DV164101PICkit 1PICkit 1 8/14P Flash Starter KitDV164102rfPICkit 1rfPICkit Development Kit 1DV164120PICkit 2PICkit 2 Starter KitDV164121PICkit 2PICkit 2 Debug ExpressDV164122PICkit 2PICkit Serial Analyzer (with 28-Pin Demo Board)DV243003SEEVAL32MPLAB Starter Kit for Memory ProductsDV244005REAL ICE REAL ICE Base probe kitDV250501CAN MCP250XX CAN Developer's KitDV251001CAN MCP2510/2515 CAN Developer's KitDVA1001Device Adapter ICE2000 Device AdapterDVA1003Device Adapter PIC18F8490/8410/8390/8310/6490/6410/6390/6310, PIC18F8722/8627/672 DVA1004Device Adapter ICE2000 Device AdapterDVA1005Device Adapter PIC16F946 64L TQFP Device AdapterDVA1006Device Adapter ICE2000 Device AdapterDVA12XP080Device Adapter PIC12C50X, CE51X PDIP and SOIC 8 LD Device AdapterDVA12XP081Device Adapter PIC12C67X, CE67X PDIP and SOIC 8 LD Device AdapterDVA16PQ441Device Adapter PIC16C64A, 65A, 65B, 67, 662, 74A, 74B, 765, 77, 774, F871,F871A, 874,DVA16XL441Device Adapter PIC16C64A, 65A, 65B, 67, 662, 74A, 74B, 765, 77, 774, F871, F871A, 874 DVA16XP140Device Adapter PIC16C505 PDIP and SOIC 14 LD Device AdapterDVA16XP141Device Adapter PIC16F630/676 14P DIP Device AdapterDVA16XP180Device Adapter PIC16C52, 54, 54A, 54B, 56, 56A, 58A, 58B, 554, 558, 620, 620A, 621, 621 DVA16XP183Device Adapter PIC16F627, 628 PDIP, SOIC, SSOP 18 LD Device AdapterDVA16XP280Device Adapter PIC16C55, 55A, 57, 57C PDIP, SOIC, and SSOP 28 LD Device Adapter DVA16XP282Device Adapter PIC16C62A, 63, 63A, 642, 66, 72, 72A, 73A, 73B, 745, 76, 773, F870,F87A DVA16XP401Device Adapter PIC16C64A, 65A, 65B, 67, 662, 74A, 74B, 765, 77, 774, F871, F871A, 874 DVA18PQ440Device Adapter PIC18F4220, 4320 TQFP 44 LD Device AdapterDVA18PQ640Device Adapter PIC18C658 TQFP 64 LD Device AdapterDVA18PQ800Device Adapter PIC18C858 TQFP 80 LD Device AdapterDVA18PQ802Device Adapter PIC18F8680, 6680, 8565, 6585, 6621, 6525, 8621, 8525 64/80L Device Ada DVA18XP180Device Adapter PIC18F1320, 1220, 16C717 PDIP 18 LD Device AdapterDVA18XP280Device Adapter PIC18F2220, 2320 PDIP 28LD Device AdapterDVA18XP400Device Adapter PIC18F4220, 4320 PDIP 40LD Device Adapter官方USD 1000.00 2560.00 445.00 445.00 445.00 445.00 445.00 445.00445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 445.00 34.99 $33.00 $50.00 $21.00 $349.99 $129.99 $159.99 $24.00 $29.99 $39.99 $25.00 $19.99 $25.00 $35.00 $35.00 $25.00 $25.00查询国内含税价格,请联系MCHP中华区原装工具代理S 商新拓电子,电话:0591-********或者邮件:sales@$25.00 $25.00 $25.00 $35.00 $35.00 $50.00 $35.00 $35.00 $35.00 $14.99 $25.00 $25.00 $50.00 $50.00 $35.00 $50.00 $50.00 $50.00 $50.00 $25.00 $45.00 $60.00 $12.00 $60.00 $89.99 $39.99 $18.95 $8.99 $159.99 $159.99 $189.99 $159.99 $159.99 $159.99 $30.00 $30.00 $25.00 $25.00 $115.00 $115.00 $9.99 $18.00 $9.99 $25.00 $39.99 $37.99 $39.99 $25.00 $45.00 $20.00 $135.00 $125.00 $80.00$60.00 $89.99 $18.95 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $189.99 $289.99 $189.99 $289.99 $189.99 $189.99 $189.99 $129.99 $159.99 $159.99 $159.99 $70.00 $159.98 $9.99 $79.99 $70.00 $120.00 $120.00 $30.00$60.00 $40.00 $30.00 $55.00 $99.99 $20.00 $20.00 $20.00 $30.00 $40.00 $20.00 $50.00 $60.00 $55.00 $59.99 $99.99 $64.95 $169.99 $87.99 $269.99 $225.00 $225.00 $225.00 $295.00 $225.00 $225.00 $199.99 $129.99 $199.99 $99.99 $165.00 $59.99 $129.99 $269.99 $269.99 $149.99 $125.00 $23.99 $23.99 $24.99 $23.99 $35.00 $110.00 $99.80 $139.99 $99.99 $129.99 $59.99 $129.99 $99.99 $99.99 $100.00$129.99 $59.98 $389.99 $389.99 $99.99 $79.99 $300.00 $800.00 $700.00 $149.99 $299.99 $79.99 $249.99 $49.99 $72.00 $55.00 $59.98 $150.00 $1.50 $595.00 $595.00 $595.00 $595.00 $595.00 $595.00 $595.00 $595.00 $595.00 $595.00 $18.00 $75.00 $75.00 $75.00 $125.00 $125.00 $40.00 $125.00 $175.00 $125.00 $125.00 $125.00 $175.00 $40.00 $125.00 $125.00 $125.00 $175.00 $225.00 $175.00 $125.00 $125.00 $125.00$225.00 $125.00 $250.00 $495.00 $895.00 $495.00 $495.00 $895.00 $5.00 $5.00 $249.99 $29.99 $2,500.00 $5.00 $4,950.00 $9,750.00 $2,500.00 $5.00 $4,950.00 $9,750.00 $4,000.00 $3,000.00 $9,750.00 $4,950.00 $2,500.00 $5.00 $9,750.00 $4,950.00 $2,500.00 $5.00 $5.00 $9,750.00 $4,950.00 $2,500.00 $5.00 $9,750.00 $4,950.00 $2,500.00 $5.00 $9,750.00 $4,950.00 $2,500.00 $5.00 $9,750.00 $4,950.00 $2,500.00 $5.00 $9,750.00 $4,950.00 $2,500.00 $5.0025.0025.00 25.00 25.00 18.00 40.00 25.00 40.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 25.00 199.99 895.00 159.99 229.99 189.99 239.98 399.99 299.99 36.00 135.00 49.99 49.99 49.99 79.98 499.98 165.00 239.99 125.00 125.00 125.00 225.00 125.00 125.00 125.00 225.00。

Vishay SiliconixSi7117DNP-Channel 150 V (D-S) MOSFETFEATURES•Halogen-free According to IEC 61249-2-21Definition•TrenchFET ® Power MOSFETs •PowerPAK ® Package- Low Thermal Resistance - Low 1.07 mm Profile•Compliant to RoHS Directive 2002/95/ECAPPLICATIONS•Active Clamp circiuts in DC/DC Power SuppliesNotes:a.Surface mounted on 1" x 1" FR4 board.b.t = 5 s.c.See solder profile (/ppg?73257). The PowerPAK 1212-8 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection.d.Rework conditions: manual soldering with a soldering iron is not recommended for leadless components.PRODUCT SUMMARYV DS (V)R DS(on) (Ω)I D (A)Q g (Typ.)- 1501.2 at V GS = - 10 V -2.177.7 nC1.3 at V GS = - 6 V- 2.1ABSOLUTE MAXIMUM RATINGS (T A = 25 °C, unless otherwise noted)Parameter Symbol Limit UnitDrain-Source Voltage V DS - 150VGate-Source VoltageV GS± 20Continuous Drain Current (T J = 150 °C)a, bT C = 25 °CI D- 2.17cA T C = 70 °C - 1.7T A = 25 °C - 1.1a, b T A = 70 °C- 0.9a, bPulsed Drain CurrentI DM - 2.2Continuous Source-Drain Diode Current a, b T C = 25 °C I S - 10.4T A = 25 °C - 2.6a, b Single Pulse Avalanche Current L ≤ 0.1 mH I AS 4.5Single Pulse Avalanche EnergyE AS1.01mJ Maximum Power Dissipationa, bT C = 25 °CP D12.5W T C = 70 °C 8T A = 25 °C 3.2a, b T A = 70 °C2a, bOperating Junction and Storage T emperature Range T J , T stg- 55 to 150°C Soldering Recommendations (Peak Temperature)c260Vishay SiliconixSi7117DNNotes:a. Surface mounted on 1" x 1" FR4 board.b. Maximum under steady state conditions is 81 °C/W.Notes:a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %.b. Guaranteed by design, not subject to production testing.Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.THERMAL RESISTANCE RATINGSParameter Symbol Typical Maximum UnitMaximum Junction-to-Ambient a, b t ≤ 10 s R thJA 3139°C/WMaximum Junction-to-Case (Drain)Steady StateR thJC810SPECIFICATIONS (T J = 25 °C, unless otherwise noted)Parameter Symbol Test Conditions Min.Typ.Max.UnitStaticDrain-Source Breakdown Voltage V DS V GS = 0 V , I D = - 250 µA- 150V V DS Temperature Coefficient ∆V DS /T J I D = - 250 µA 145mV/°C V GS(th) Temperature Coefficient ∆V GS(th)/T J 6.7Gate-Source Threshold Voltage V GS(th) V DS = V GS , I D = - 250 µA - 2.5- 4.5V Gate-Source LeakageI GSS V DS = 0 V, V GS = ± 20 V - 100ns Zero Gate Voltage Drain Current I DSS V DS = - 150 V , V GS = 0 V - 1µA V DS = - 150 V , V GS = 0 V , T J = 55 °C- 10On-State Drain Current aI D(on) V DS ≤ 15 V , V GS = - 10 V - 1.6A Drain-Source On-State Resistance a R DS(on) V GS = - 10 V , I D = - 0.5 A 1 1.2ΩV GS = - 6 V , I D = - 0.5 A 1.05 1.3Forward T ransconductance a g fsV DS = - 15 V , I D = - 0.5 A2.2SDynamic bInput Capacitance C iss V DS = - 25 V , V GS = 0 V , f = 1 MHz340510pFOutput CapacitanceC oss 30Reverse Transfer Capacitance C rss 16Total Gate Charge Q g V DS = - 75 V, V GS = - 10 V , ID = - 0.5 A 7.712nCGate-Source Charge Q gs 1.5Gate-Drain Charge Q gd 2.5Gate Resistance R g f = 1 MHz9ΩTurn-On Delay Time t d(on) V DD = - 75 V , R L = 7.5 Ω I D ≅ - 1 A, V GEN = - 10 V , R g = 6 Ω711ns Rise Timet r 1117Turn-Off Delay Time t d(off) 1625Fall Timet f1117Drain-Source Body Diode Characteristics Continuous Source-Drain Diode CurrentI S T C = 25 °C- 12APulse Diode Forward Current I SM - 12Body Diode VoltageV SD I S = - 1 A, V GS = 0 V- 0.7- 1.2V Body Diode Reverse Recovery Time t rr I F = - 0.5 A, dI/dt = 100 A/µs, T J = 25 °C4265ns Body Diode Reverse Recovery Charge Q rr 90135nC Reverse Recovery Fall Time t a 35ns Reverse Recovery Rise Timet b7Vishay SiliconixSi7117DN TYPICAL CHARACTERISTICS (25°C, unless otherwise noted)Output CharacteristicsTransfer CharacteristicsCapacitanceDocument Number: Document Number: 73478Source-Drain Diode Forward VoltageOn-Resistance vs. Gate-to-Source VoltageSingle Pulse Power, Junction-to-AmbientAVishay SiliconixSi7117DNTYPICAL CHARACTERISTICS (25°C, unless otherwise noted)* The power dissipation P D is based on T J(max) = 175 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit.Max Current vs. Case TemperatureSi7117DNVishay SiliconixTYPICAL CHARACTERISTICS 25°C, unless otherwise notedNormalized Thermal Transient Impedance, Junction-to-CaseVishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see /ppg?73478.Revison: 06-Jun-161Document Number: 71656Vishay SiliconixAN822Document Number PowerPAK ® 1212 Mounting and Thermal ConsiderationsJohnson ZhaoMOSFETs for switching applications are now available with die on resistances around 1 m Ω and with the capability to handle 85 A. While these die capabilities represent a major advance over what was available just a few years ago, it is important for power MOSFET packaging technology to keep pace. It should be obvi-ous that degradation of a high performance die by the package is undesirable. PowerPAK is a new package technology that addresses these issues. The PowerPAK 1212-8 provides ultra-low thermal impedance in a small package that is ideal for space-constrained applications. In this application note, the PowerPAK 1212-8’s construction is described. Following this,mounting information is presented. Finally, thermal and electrical performance is discussed.THE PowerPAK PACKAGEThe PowerPAK 1212-8 package (Figure 1) is a deriva-tive of PowerPAK SO-8. It utilizes the same packaging technology, maximizing the die area. The bottom of the die attach pad is exposed to provide a direct, low resis-tance thermal path to the substrate the device is mounted on. The PowerPAK 1212-8 thus translates the benefits of the PowerPAK SO-8 into a smaller package, with the same level of thermal performance.(Please refer to application note “PowerPAK SO-8Mounting and Thermal Considerations.”)The PowerPAK 1212-8 has a footprint area compara-ble to TSOP-6. It is over 40 % smaller than standard TSSOP-8. Its die capacity is more than twice the size of the standard TSOP-6’s. It has thermal performance an order of magnitude better than the SO-8, and 20times better than TSSOP-8. Its thermal performance is better than all current SMT packages in the market. It will take the advantage of any PC board heat sink capability. Bringing the junction temperature down also increases the die efficiency by around 20 % compared with TSSOP-8. For applications where bigger pack-ages are typically required solely for thermal consider-ation, the PowerPAK 1212-8 is a good option.Both the single and dual PowerPAK 1212-8 utilize the same pin-outs as the single and dual PowerPAK SO-8.The low 1.05 mm PowerPAK height profile makes both versions an excellent choice for applications with space constraints.PowerPAK 1212 SINGLE MOUNTINGTo take the advantage of the single PowerPAK 1212-8’s thermal performance see Application Note 826,Recommended Minimum Pad Patterns With Outline Drawing Access for Vishay Siliconix MOSFETs. Click on the PowerPAK 1212-8 single in the index of this document.In this figure, the drain land pattern is given to make full contact to the drain pad on the PowerPAK package.This land pattern can be extended to the left, right, and top of the drawn pattern. This extension will serve to increase the heat dissipation by decreasing the ther-mal resistance from the foot of the PowerPAK to the PC board and therefore to the ambient. Note that increasing the drain land area beyond a certain point will yield little decrease in foot-to-board and foot-to-ambient thermal resistance. Under specific conditions of board configuration, copper weight, and layer stack,experiments have found that adding copper beyond an area of about 0.3 to 0.5 in 2 of will yield little improve-ment in thermal performance.Figure 1.PowerPAK 1212 Devices Document Number 71681Vishay SiliconixAN822PowerPAK 1212 DUALTo take the advantage of the dual PowerPAK 1212-8’s thermal performance, the minimum recommended land pattern can be found in Application Note 826,Recommended Minimum Pad Patterns With Outline Drawing Access for Vishay Siliconix MOSFETs . Click on the PowerPAK 1212-8 dual in the index of this doc-ument.The gap between the two drain pads is 10 mils. This matches the spacing of the two drain pads on the Pow-erPAK 1212-8 dual package.This land pattern can be extended to the left, right, and top of the drawn pattern. This extension will serve to increase the heat dissipation by decreasing the ther-mal resistance from the foot of the PowerPAK to the PC board and therefore to the ambient. Note that increasing the drain land area beyond a certain point will yield little decrease in foot-to-board and foot-to-ambient thermal resistance. Under specific conditions of board configuration, copper weight, and layer stack,experiments have found that adding copper beyond an area of about 0.3 to 0.5 in 2 of will yield little improve-ment in thermal performance.REFLOW SOLDERINGVishay Siliconix surface-mount packages meet solder reflow reliability requirements. Devices are subjected to solder reflow as a preconditioning test and are then reliability-tested using temperature cycle, bias humid-ity, HAST, or pressure pot. The solder reflow tempera-ture profile used, and the temperatures and time duration, are shown in Figures 2 and 3. For the lead (Pb)-free solder profile, see /doc?73257.Ramp-Up Rate+ 6°C /Second Maximum Temperature at 155 ± 15 °C 120 Seconds Maximum Temperature Above 180 °C 70 - 180 Seconds Maximum T emperature240 + 5/- 0 °CTime at Maximum T emperature 20 - 40 Seconds Ramp-Down Rate+ 6 °C/Second MaximumFigure 2. Solder Reflow Temperature ProfileFigure 3.Solder Reflow Temperatures and Time DurationsVishay SiliconixAN822Document Number THERMAL PERFORMANCE IntroductionA basic measure of a device’s thermal performance is the junction-to-case thermal resistance, R θjc, or the junction to- foot thermal resistance, R θjf. This parameter is measured for the device mounted to an infinite heat sink and is therefore a characterization of the device only, in other words, independent of the properties of the object to which the device is mounted. Table 1 shows a comparison of the PowerPAK 1212-8, PowerPAK SO-8,standard TSSOP-8 and SO-8 equivalent steady state performance.By minimizing the junction-to-foot thermal resistance, the MOSFET die temperature is very close to the tempera-ture of the PC board. Consider four devices mounted on a PC board with a board temperature of 45 °C (Figure 4). Suppose each device is dissipating 2 W. Using the junc-tion-to-foot thermal resistance characteristics of the PowerPAK 1212-8 and the other SMT packages, die temperatures are determined to be 49.8 °C for the Pow-erPAK 1212-8, 85 °C for the standard SO-8, 149 °C for standard TSSOP-8, and 125 °C for TSOP-6. This is a 4.8 °C rise above the board temperature for the Power-PAK 1212-8, and over 40 °C for other SMT packages. A 4.8 °C rise has minimal effect on r DS(ON) whereas a rise of over 40 °C will cause an increase in r DS(ON) as high as 20 %.Spreading CopperDesigners add additional copper, spreading copper, to the drain pad to aid in conducting heat from a device. It is helpful to have some information about the thermal performance for a given area of spreading copper.Figure 5 and Figure 6 show the thermal resistance of a PowerPAK 1212-8 single and dual devices mounted on a 2-in. x 2-in., four-layer FR-4 PC boards. The two inter-nal layers and the backside layer are solid copper. The internal layers were chosen as solid copper to model the large power and ground planes common in many appli-cations. The top layer was cut back to a smaller area and at each step junction-to-ambient thermal resistance measurements were taken. The results indicate that an area above 0.2 to 0.3 square inches of spreading copper gives no additional thermal performance improvement.A subsequent experiment was run where the copper on the back-side was reduced, first to 50 % in stripes to mimic circuit traces, and then totally removed. No signif-icant effect was observed.TABLE 1: EQIVALENT STEADY STATE PERFORMANCEPackage SO-8TSSOP-8TSOP-8PPAK 1212PPAK SO-8ConfigurationSingleDual Single Dual Single Dual Single Dual Single Dual Thermal Resiatance R thJC (C/W)2040528340902.45.51.85.5Figure 4. Temperature of Devices on a PC Board 4Document Number 7168103-Mar-06Vishay SiliconixAN822CONCLUSIONSAs a derivative of the PowerPAK SO-8, the PowerPAK 1212-8 uses the same packaging technology and has been shown to have the same level of thermal perfor-mance while having a footprint that is more than 40 %smaller than the standard TSSOP-8.Recommended PowerPAK 1212-8 land patterns are provided to aid in PC board layout for designs using this new package.The PowerPAK 1212-8 combines small size with attrac-tive thermal characteristics. By minimizing the thermal rise above the board temperature, PowerPAK simplifies thermal design considerations, allows the device to run cooler, keeps r DS(ON) low, and permits the device to handle more current than a same- or larger-size MOS-FET die in the standard TSSOP-8 or SO-8 packages.Figure 5. Spreading Copper - Si7401DNFigure 6. Spreading Copper - Junction-to-Ambient PerformanceApplication Note 826Vishay SiliconixDocument Number: Revision: 21-Jan-087A P P L I C A T I O NN O T ERECOMMENDED MINIMUM PADS FOR PowerPAK® 1212-8 SingleLegal Disclaimer Notice VishayDisclaimerALL PRODUCT, PRODUCT SPECIFICAT IONS AND DAT A ARE SUBJECT T O CHANGE WIT HOUT NOT ICE T O IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-161Document Number: 91000。

SUNSTAR 商斯达微波光电公司 射频、微波、光纤、光电、通讯产品目 录更多产品请看本公司产品专用销售网站:欢迎来电查询购买商斯达产品或索取免费详细资料、设计指南和光盘；产品繁多，未能尽录，欢迎来电查询。

商斯达射频微波光电产品网:/商斯达中国传感器科技信息网：/商斯达工控安防网：/商斯达电子元器件网：/商斯达军工产品网：hrrp：///商斯达消费电子产品网:///商斯达实业研制科技产品网:/// 射频微波光电元器件销售热线：地址：深圳市福田区福华路福庆街鸿图大厦1602室电话：0755-******** 83397033 83398585 82884100MSN:邮编：518033 E-mail:QQ: 195847376深圳赛格展销部：深圳华强北路赛格电子市场2583号 电话：0755-******** 25059422 技术支持: 0755-******** 135********北京分公司：北京海淀区知春路132号中发电子大厦3097号TEL：82615020 FAX：上海分公司：上海市北京东路668号上海賽格电子市场D125号TEL：56703037 FAX：西安分公司：西安高新开发区20所(中国电子科技集团导航技术研究所)西安劳动南路88号电子商城二楼D23号TEL：Aavid ThermalloyABRACON CorporationAEPAeroflex INMETAeroflex KDI Resistor ProductsAmerican Tech Ceramics (ATC)AmphenolANADIGICSAnarenAnaren/RF PowerArcotronicsAvago TechnologiesBOMAR Interconnect Products, Inc.Cornell DubilierCrystek CorporationCTS CorporationDynex SemiconductorElectronic Devices, Inc.Emerson Network Power (formerly Johnson Components) Empower RF Systems, Inc.EPCOS F.W. BellFractusfree2moveFreescale Semiconductor, Inc. General ElectricGoreHoneywellHuber+SuhnerHVVIIllinois Capacitor, Inc.Infineon TechnologiesIQD Frequency ProductsJohanson ManufacturingLaird TechnologiesM/A-COM Technology Solutions Maxwell TechnologiesMicrosemiMicrosemi (Santa Clara)Mimix Broadband (formerly Celeritek) Mitsubishi ElectronicsNational ElectronicsNDKNEC Compound Semiconductors NitronexOhmitePacific MonolithicsPCTEL (Maxrad, Inc.)Peregrine Semiconductor PolyPhaser Corporation PowerexRadiallRadiotronixRaltronRES - IngeniumRF IndustriesRichardson Component Solutions Richardson Power Solutions Richardson System Solutions RiedonSDP Components, Inc. SemeLab, PlcSemikron Spectrum Advanced Specialty Products Spectrum MicrowaveST MicroelectronicsSV MicrowaveTeledyne CoaxTeledyne RelaysTensolite CDI/QMIToko AmericaTyco ElectronicsUnited Chemi-con, Inc.United Monolithic Semiconductors (UMS) Valpey FisherVincotechVishayWakefield Thermal SolutionsWanTcomWavecomWestcode Semiconductors, Inc.WJ CommunicationsMTI MilanoPacific MonolithicsMini-Circuits公司是1969年由 Harvey Kaylie先生创立的。

成都泰盟科技有限公司2011年产品目录成都泰盟科技有限公司2011年8月NPS-100脑片灌流测定系统分项报价表（该价格表适用日期：2011.8——2011.12）注：●该价格已包含产品的安装调试与保修费用，本公司郑重承诺：凡成都泰盟科技有限公司的产品，实行半年包换，一年保修。

成都泰盟科技有限公司2011年8月BW-200生理无线遥测系统配置报价表（该价格表适用日期：2011.8——2011.12）成都泰盟科技有限公司2011年8月DS-4多室同步循环灌流系统分项报价表（该价格表适用日期：2011.8——2011.12）注：●该价格已包含产品的安装调试与保修费用，本公司郑重承诺：凡成都泰盟科技有限公司的产品，实行半年包换，一年保修。

成都泰盟科技有限公司2011年8月TM-Vision小鼠行为学实验系统配置报价表（该价格表适用日期：2011.8——2011.12）成都泰盟科技有限公司2011年8月VBL-100医学机能虚拟实验室系统配置报价表（该价格表适用日期：2011.8——2011.12）注：1、连入校园网版本价格按100以上客户同时访问计算；2、公司会不断开发新的版本，提供更多更精致的内容，但需要有偿升级；3、公司可以按照用户要求进行虚拟实验室的整体设计和配置，包括全套的电脑、网络、投影仪、实验桌等，让学校购买后即可安心使用，这些配置的价格另算。

成都泰盟科技有限公司2011年8月TG-200温度梯度仪系统配置报价表（该价格表适用日期：2011.1——2011.12）注：● TG-200温度梯度仪管体内置16组位置探测仪和16组温度探测仪，7组LED照明灯，管壁顶部有26个通气小孔和1个喂水孔● TG-200定制的金属网格鼠笼两端有喂食盒，保证实验大鼠可以在管体内长时间生活。

● TG-200温度梯度仪管体底部预留有空间可以安装定制的无线遥测接收天线，如果不采集无线信号，不需要该天线。

成都泰盟科技有限公司2011年5月。

威谱数字电话交换系统威谱通讯商务平台TDMx-2000型技术手册广州市华谱电子科技有限公司目录1.系统概述 (1)1.1. 系统简介 (1)1.2. 优势功能 (1)1.3. 产品规格 (2)1.3.1. 外观介绍 (2)1.3.2. 电源要求 (2)1.3.3. 环境要求 (2)1.3.4. D、F系列传输距离 (2)1.3.5. B2、X系列传输距离 (2)1.3.6. H系列传输距离 (2)1.3.7. 外形尺寸 (3)1.3.8. 重量 (3)1.3.9. 系统拓扑结构 (3)1.4. 结构与容量配置 (4)1.4.1. TDMx-2000型B2系列机柜 (4)1.4.2. TDMx-2000 型B2系列容量配置 (5)1.4.3. TDMx-2000 型X系列容量配置 (5)1.4.4. TDMx-2000型H系列容量配置 (6)1.4.5. TDMx-2000型D系列容量配置 (6)1.4.6. TDMx-2000型D系列DM主机容量配置 (7)1.4.7. TDMx-2000型F系列容量配置 (9)1.4.8. 机柜间连接 (11)1.4.9. 安装前的准备 (12)1.4.10. 主机安装 (12)2.常用功能码操作说明 (15)3.数据简易配置（仅限于B2、H、X系列） (17)3.1. 自动装机 (17)3.2. 恢复出厂数据（D/DM/F系列） (17)3.3. 恢复出厂IP地址 (17)4.威谱系统管理平台 (17)4.1. 管理软件登录 (17)4.2. 库下载 (18)4.3. 端口维护 (18)4.4. 功能表维护 (18)4.5. 路由表维护 (19)4.6. 服务等级维护 (19)4.7. 前缀码表维护 (19)4.8. 主机设置 (20)4.9. 库上传 (21)4.10. 语音导航配置 (22)4.11. 重启 (22)4.12. 保存库 (23)4.13. 打开库 (23)4.14. 导出库 (23)4.15. 导入库 (23)4.16. 上传音乐 (23)5.常用编程实例 (24)5.1.1. 分机号码设定 (24)5.1.2. 分机服务等级设定 (24)5.1.3. 内线使用模式 (24)5.1.4. 呼叫转移、呼叫等待设定 (24)5.1.5. 数字话机设定 (25)5.1.6. 同组代接设定 (25)5.1.7. 工作组设定 (25)5.1.8. 通话时间限制设定 (25)5.1.9. 群功能保护设定 (26)5.1.10. 通话音量调节 (26)5.1.11. PC话务台权限设定 (26)5.1.14. 不同线路呼入不同语音功能 (28)5.1.15. 内置电脑话务员的应用 (28)5.1.16. 电脑话务员语音的录制 (29)5.1.17. PRI数字中继设定 (32)5.1.18. 数字中继呼入模式 (32)5.1.19. 数字中继汇接 (33)5.1.20. 数字中继混合通道模式 (35)5.1.21. 一号信令的设置方法 (35)5.1.22. VPN (36)5.1.23. 出局号及IP加发的设定 (37)5.1.24. 默认出局号修改 (37)5.1.25. 计费设定 (37)5.1.26. IVR语音导航设定 (38)5.1.27. 数字录音系统设定（限H、D、F系列） (39)5.1.28. 公共寻线组设定 (39)5.1.29. 呼入加拨前缀设定 (39)5.1.30. 自动外转外呼叫功能 (39)5.1.31. 随身密码 (40)5.1.32. 强插、强拆、监听功能 (40)5.1.33. 分机局向限制 (40)5.1.34. 分机来电显示限制 (40)5.1.35. 话机修改服务等级 (40)5.1.36. 电话修改网管号码 (41)5.1.37. 模拟中继直接转移 (41)5.1.38. 缩位拨号 (41)5.1.39. 路由允许码设置 (41)5.1.40. 语音叫醒功能 (42)5.1.41. 内外线振铃区分 (42)5.1.42. 统一拨0出局 (42)5.1.43. 直出中继 (42)5.1.44. 智能路由设置 (43)5.1.45. 内外线直拨 (43)5.1.46. GSM、CDMA无线中继卡设定 (44)5.1.47. 白名单功能 (46)5.1.48. 经理秘书功能 (47)5.1.49. 服务等级跳转功能 (48)5.1.50. 号码分析功能 (48)5.1.51. 黑名单功能 (48)6.电脑命令行编程 (49)6.1. 电脑连接 (49)6.1.1. 通过串口连接 (49)6.2. 登录 (50)6.2.1. 通过超级终端串口登录 (50)6.2.2. 通过超级终端TCP/IP登录 (50)6.3. 输入规则 (50)6.4. 自动装机 (51)6.5. 显示网络配置信息 (51)6.6. 配置网络 (52)6.7. 更改口令 (52)6.8. 配置呼叫控制参数 (52)6.9. 系统日期/时间参数配置 (53)6.10. 系统计费开关 (53)6.11. 功能码维护 (54)6.12. 读取设备序列号 (54)6.13. 激活设备 (54)6.14. 重启系统 (55)6.15. 退出系统 (55)7.系统升级 (55)7.1. 下载 (55)7.4. 主控板 (56)7.5. 扩展主控板 (57)7.6. 二次电源板 (57)7.7. 模拟用户板 (58)7.8. 环路中继板 (59)7.9. 数字用户板（二代） (60)7.10. 信令板 (60)7.11. 数字中继板（E1） (61)8.机器常见故障 (61)8.1. 常见程序故障的排除 (62)1.系统概述1.1.系统简介威谱数字电话交换系统TDMx-2000型是广州市华谱电子科技有限公司自主研发的高科技产品，它集数字交换技术、网络技术、数据库技术、CTI技术于一体，既保证了技术的先进性，又保留了使用的简易性和系统的经济性，是传统程控电话交换机的升级换代产品。

WABCO威伯科公司wabco | 威伯科wabco | 威伯科WABCO代理| 威伯科WABCO电磁阀|WABCO空气处理系统：空压机，空气干燥器，四回路保护阀，贮气筒，调压阀，电子空气处理单元| WABCO传动系统：变速箱自动控制，离合器助力和控制排气制动，缓速器控制| WABCO制动器和制动气室：鼓式和盘式制动器，制动气室--因科思国际贸易有限公司wabco公司中国代理商德国WABCO | wabco气动控制阀| WABCO空气干燥器总成| WABCO瓦伯科刹车制动总泵| wabco高度控制阀| WABCO气动阀威伯科汽车控制系统（纽交所交易代码：WBC）是全球领先的商用车辆安全及控制系统供应商。

成立至今的140多年来，威伯科一直引领着电子、机械及机电技术领域的突破与创新，为世界领先的商用卡车、挂车和客车制造商提供制动、稳定控制和自动变速控制产品威伯科通过全球领先的技术优势，致力于不断预见和满足全球对卡车，客车和挂车的使用效率，环保持续性，安全性和驾驶员有效性方面逐年提高的要求。

威伯科总部位于比利时布鲁塞尔，在全球31个国家拥有9900名员工。

2010年全球销售总额为22亿美元。

威伯科作为技术领先者，其商用车辆行业里程碑式的重要技术创新就是最好的诠释：2010年，首款自动紧急制动系统（AEBS）符合欧盟即将推出的法规2009年，首款用于电子稳定性控制（ESC）鉴定的模拟系统2008年，首个商用车自动紧急制动系统（AEB）诞生2007年，首个商用车带自动制动功能的碰撞预警系统（CMS）诞生2001年，首个商用车电子稳定控制系统（ESC）诞生1996年，首个电子制动系统（EBS）诞生1986年，首个商用车自动机械变速箱控制系统（AMT）诞生1986年，首个商用车电子控制空气悬架系统（ECAS）诞生1981年，首个重型卡车防抱死制动系统（ABS）诞生威伯科致力于提高卡车、客车和挂车的安全与效率，并同时降低车辆的整体运营成本。

深圳市慧拓鑫科技有限公司Shenzhen Hui Tuo Xin Technology Co., Ltd.产品资料Product information1、TOP电源防雷箱系列（TOP Power lightning protection box series） (2)2、TP 限压型电源防雷模块系列（TP V oltage limiting type power supply lightning protection module series） (5)3、TP直流电源防雷模块系列（TP DC power supply lightning protection module series） (8)4、TCP电源未端精细防护防雷器系列（TCP Power supply terminal fine protective lightning arrester series） (11)5、TDC 电源插座(TDC Power supply lightning protection socket series) (14)6、TV 视频防雷器系列(TV Video arrester series) (17)7、T 视频/射频防雷器系列(T Video / RF lightning arrester series) (20)8、TC控制线路防雷器系列( TC Control circuit lightning arrester series) (23)9、10/100M网络线路防雷器(10/100M Network circuit lightning arrester) (25)10、通讯专线防雷器(Communication line lightning arrester) (28)11、TT天馈线路防雷器系列(TT Antenna line arrester series) (30)1、TOP电源防雷箱系列（TOP Power lightning protection box series）产品介绍Product introductionTOP电源防雷箱系列依据IEC标准设计，8/20波形最大通流容量20KA-100KA，能对电源系统的浪涌电压进行有效的钳制，电源B、C、D级产品均具备。

Front PanelsELECTRONICS PROTECTIONSCHROFF PRODUCT CATALOG E 10//SCHROFFModules –Front panels|7.2OVERVIEW MAIN KATALOGCabinets . . . . . . . 1Wall mountedcases . . . . . . . . . 2 Accessories for cabinets and wall mounted cases . . 3Climate control . . 4Electronicscases . . . . . . . . . 5Subracks/19" chassis . . . . . 6Front panels,plug-in units . . . . 7Systems . . . . . . . 8Power supplyunits . . . . . . . . . . 9Backplanes . . . . 10Connectors, front panel component system . . . . . . . 11Appendix . . . . . 1204292001STANDARDS•IEC 60297-3-101/IEEE 1101.1/10SERVICEPLUSe.g. individual colouring e.g. customised cut-outs e.g. printinge.g. mounting service e.g. special dimensions323040030421000104603009Modules –Front panelsOVERVIEW7.3/SCHROFF |FRONT PANELS FOR FITTING IN SUBRACKS, CASES AND SYSTEMS• Extensive standard range with various finishes and materials (aluminium or stainless steel)• Front Panel Express:Fast delivery service of customised versions (from 2 days)• EMC shielding retrofittableFRONT PANELS, UNSHIELDED•Aluminium, clear anodised•Aluminium, clear pre-anodised, cut edge untreated •Aluminium, front anodised, rear iridescent green chromated•Other finishes on request04292001FRONT PANELS SHIELDABLE, FLAT•With lateral grooves to fit EMC gaskets (stainless steel)•Compatible with the shielded U profile version04600006FRONT PANELS, SHIELDABLE, U PROFILE•With lateral groove to fix a textile self-adhesive EMC gasket•Compatible with the shielded flat version •High robustness through U profile04602004FURTHER FRONT PANELS•Hinged/folding front panels •Front panels with GND/earthing •Mezzanine front panels •AdvancedTCA front panels •MicroTCA front panels •AdvancedMC front panels0429500104295002Overview . . . . . . 7.2Front panelsUnshielded . . . . . . . 7.4Shieldable . . . . . . . . 7.5EMC stainless steel gaskets . . . . . . . . . . 7.6Assembly tool . . . . . 7.6Front panelsShieldable(U profile) . . . . . . . . 7.7EMC textile gasket . 7.6Further front panelsHinged . . . . . . . . . . 7.8Hinged, shielded . . . 7.9For D-Subconnectors . . . . . . 7.10For Coaxconnectors . . . . . . . 7.113 U with GND/earthing . . . . . . . . . 7.11Mezzanine frontpanels . . . . . . . . . . . 7.12Assembly kit . . . . . . 7.107AdvancedTCA frontpanels . . . . . . . . . . . 8.12MicroTCA frontpanels . . . . . . . . . . . 8.65AdvancedMC frontpanels . . . . . . . . . . . 8.60SCHROFF PRODUCT CATALOG E 10/20197.4/SCHROFFModules –Front panels|•Front panel, Al, 2.5mm•Versions:•Al, anodised•Al, anodised, cut edges plain•Al, front anodised, rear iridescent green chromatedNOTE•Other sizes and finishes available on request•Please order fixing material separately, see chapter Assemply parts, page 7.107ORDER INFORMATION•Please order fixing material (sleeves, collar screws) separately, see page 7.107FRONT PANELS, UNSHIELDED04602084046020512 HP> 2 HPH Width B b1b2Qty 1)Anodised, cut edges plain Anodised Front anodised, rear colorless chromated mm HP mm mm mm Part no.Part no.Part no.139.584426.4411.5203.21––20850-426284.084426.4411.5203.2130818-27130807-41630847-4613128.429.8–– 1 (SPQ 5)1)30810-43330810-43230847-4703128.4314.9–– 1 (SPQ 5)1)30818-27230807-50830847-4713128.4420.0–– 1 (SPQ 5)1)30818-27330807-48130838-0433128.4525.0–– 1 (SPQ 5)1)30818-27430807-51030838-0443128.4630.1–– 1 (SPQ 5)1)30818-27530807-48230838-0453128.4735.2–– 1 (SPQ 5)1)30818-27630807-50930838-0463128.4840.325.4 2)–1 (SPQ 5)1)30818-27730807-48430838-0473128.41050.535.6– 1 (SPQ 5)1)30818-27930807-48330838-0493128.41260.645.7– 1 (SPQ 5)1)30818-28130807-48530838-0513128.41470.855.9– 1 (SPQ 5)1)30818-28230807-50130838-0533128.421106.391.4– 1 (SPQ 5)1)30818-28930807-48730838-0603128.428141.9127.0– 1 (SPQ 5)1)30818-29630807-49630838-0673128.442213.0198.1101.6 2)130818-31030807-49430838-0813128.463319.7304.8157.5130818-33130808-06730838-1023128.484426.4411.5203.2130818-35230807-50630838-1234172.984426.4411.5203.2130818-43430807-59630847-4656261.829.8–– 1 (SPQ 5)1)30818-74730818-74130847-4726261.8420.0–– 1 (SPQ 5)1)30818-51830807-77830838-1246261.8525.0–– 1 (SPQ 5)1)30818-51930807-77730838-1256261.8630.1–– 1 (SPQ 5)1)30818-52030807-75230838-1266261.8735.2–– 1 (SPQ 5)1)30818-521–30838-1276261.8840.325.4 2)– 1 (SPQ 5)1)30818-52230807-77930838-1286261.81050.535.6– 1 (SPQ 5)1)30818-52430807-75330838-1306261.81260.645.7– 1 (SPQ 5)1)30818-52630807-75530838-1326261.81470.855.9– 1 (SPQ 5)1)30818-52830807-75830838-1346261.81680.966.0– 1 (SPQ 5)1)30818-53030807-78030838-1366261.821106.391.4– 1 (SPQ 5)1)30818-53530807-75730838-1416261.828141.9127.0– 1 (SPQ 5)1)30818-54230807-76630838-1486261.842213.0198.1101.6 2)130818-55630807-76430838-1626261.863319.7304.8157.5130818-57730807-77130838-1836261.884426.4411.5203.2130818-59830807-77630838-2049395.184426.4411.5203.21––30847-5561) SPQ (standard pack quantity): Part number includes 1 piece, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or a multiple2) This dimension is only available for "front anodised, rear iridescent green chromated" version7.5Modules –Front panels/SCHROFF |Part number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 10 working days046020522 HP> 2 HP•Front panel, Al, 2.5 mm, front anodised, rear iridescent green chromated,2 alignment pins pressed-in, stainless steel •Shielding with stainless steel EMC gasketORDER INFORMATIONDelivery is exclusively made in Standard Pack Quantity (SPQ): Please order at least 5 pieces or a multiple. Pricing is per individual item.NOTE•Please order fixing material (sleeves, collar screws) separately, see page 7.107•Please order stainless steel EMC gasket separately, see page 7.6FRONT PANELS, SHIELDABLEHeight H Width B b1b2Align-ment pin QtyPart no.U mm HP mm mm mm 28484426.4411.5203.2–130846-5883128.429.8––– 1 (SPQ 5)1)30846-8643128.4314.9––x 1 (SPQ 5)1)20846-4253128.4420––x 1 (SPQ 5)1)20846-4263128.4525––x 1 (SPQ 5)1)20846-4273128.4630.1––x 1 (SPQ 5)1)20846-4283128.4735.2––x 1 (SPQ 5)1)20846-4293128.4840.325.4–x 1 (SPQ 5)1)20846-4303128.41050.535.6–x 1 (SPQ 5)1)20846-4313128.41260.645.7–x 1 (SPQ 5)1)20846-4323128.41470.855.9–x 1 (SPQ 5)1)20846-4333128.421106.391.4–x 1 (SPQ 5)1)20846-4343128.428141.9127–x 1 (SPQ 5)1)20846-4363128.442213198.1101.6x 120846-4373128.463319.7304.8157.5x 120846-4383128.484426.4411.5203.2–130846-6764172.984426.4411.5203.2–130846-6836261.829.8––– 1 (SPQ 5)1)30846-8656261.8420––x 1 (SPQ 5)1)20846-4436261.8525––x 1 (SPQ 5)1)20846-4446261.8630.1––x 1 (SPQ 5)1)20846-4456261.8735.2––x 1 (SPQ 5)1)20846-4466261.8840.325.4–x 1 (SPQ 5)1)20846-4476261.81050.535.6–x 1 (SPQ 5)1)20846-4486261.81260.645.7–x 1 (SPQ 5)1)20846-4496261.81470.855.9–x 1 (SPQ 5)1)20846-4506261.81680.966–x 1 (SPQ 5)1)20846-4566261.821106.391.4–x 1 (SPQ 5)1)20846-4516261.828141.9127–x 1 (SPQ 5)1)20846-4526261.842213198.1101.6x 120846-4536261.863319.7304.8157.5x 120846-4546261.884426.4411.5203.2–130846-7719395.184426.4411.5203.2–130846-859SCHROFF PRODUCT CATALOG E 10/2019/SCHROFFModules –Front panels|•The stainless steel EMC gaskets are inserted into the lateral slots of the shieldable front panels (2pieces per front panel)DELIVERY COMPRISESORDER INFORMATIONNOTE•Please order assembly tool separatelySTAINLESS STEEL EMC GASKETbga45760aza45937Item Qty Description110/100EMC gasket (stainless steel)Height Height Qty/PU Part no.U mm 2521021101-7753971021101-70539710021101-70641421021101-713414210021101-71451871021101-777518710021101-77862321021101-707623210021101-70893671021101-709936710021101-710Assembly tool for EMC gasket (stainless steel), 1 piece24560-270B1 (red): -40 ... -70 °C, B2 (blue): -40 ... -85 °C046140527.7Modules –Front panels/SCHROFF |Part number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 10 working days•High stability through U profile•Front panel, U profile, Al, front anodised, rear conductive, 2 alignment pins pressed-in, stainless steel•Differerences in the finish between 2 ... 12 HP and 14 ... 84 HPORDER INFORMATION1) Delivery is exclusively made in Standard Pack Quantity (SPQ): Please order at least 5 pieces or a multiple. Pricing is per individual item.NOTE•Differences in finish between 2...12HP and 14...84HP • 2 ... 12 HP: one-part U-profile•14 ... 84 HP: multi-part U-profile (front panel with crimped profiles)•Please order fixing material (sleeves, collar screws) separately, see page 7.107•Please order textile EMC gasket separately, see page 7.6FRONT PANELS, U PROFILE, SHIELDABLE2 HP3 U0460815504608158> 3 HP04608156Height H Width B b1b2Align-ment pin Qty Part no.U mm HP mm mm mm 28484426.4411.5203.2– 1 (SPQ 5)1)20848-2623128.429.8––x 1 (SPQ 5)1)30849-0013128.4314.9––x 1 (SPQ 5)1)30849-0043128.4420––x 1 (SPQ 5)1)30848-3543128.4525––x 1 (SPQ 5)1)30848-3783128.4630.1––x 1 (SPQ 5)1)30848-3803128.4735.2––x 1 (SPQ 5)1)30848-3823128.4840.325.4–x 1 (SPQ 5)1)30848-3563128.41050.535.6–x 1 (SPQ 5)1)30848-3863128.41260.645.7–x 1 (SPQ 5)1)30848-3583128.41470.855.9–x 1 (SPQ 5)1)20848-0133128.41680.966–x 1 (SPQ 5)1)20848-0153128.421106.391.4–x 1 (SPQ 5)1)20848-0203128.428141.9127–x 1 (SPQ 5)1)20848-0273128.442213198.1101.6x 120848-0473128.463319.7304.8157.5x 120848-0683128.484426.4411.5203.2– 1 20848-0974172.984426.4411.5203.2– 120848-2716261.829.8––x 1 (SPQ 5)1)30849-0026261.8420––x 1 (SPQ 5)1)30848-3556261.8525––x 1 (SPQ 5)1)30848-3796261.8630.1––x 1 (SPQ 5)1)30848-3816261.8735.2––x 1 (SPQ 5)1)30848-3836261.8840.325.4–x 1 (SPQ 5)1)30848-3576261.81050.535.6–x 1 (SPQ 5)1)30848-3876261.81260.645.7–x 1 (SPQ 5)1)30848-3596261.81470.855.9–x 1 (SPQ 5)1)20848-1066261.81680.966–x 1 (SPQ 5)1)20848-1086261.821106.391.4–x 1 (SPQ 5)1)20848-1136261.828141.9127–x 1 (SPQ 5)1)20848-1206261.842213198.1101.6x 120848-1396261.863319.7304.8157.5x 120848-1606261.884426.4411.5208.3–120848-1899395.184426.4411.5203.2–120848-280SCHROFF PRODUCT CATALOG E 10/2019/SCHROFFModules –Front panels|0429500104602080Unshielded04602079Shielded•Suitable for subracks (europacPRO) and cases (ratiopacPRO, propacPRO, compacPRO)•Front panel can be unhinged at 135° (not ratiopacPRO) opening angle•The useable width is not restricted •Mounts on the horizontal rails• 2 versions:•unshielded•shielded, U front panel with textile EMC gasketDELIVERY COMPRISES (kit)ORDER INFORMATIONDIMENSIONSFRONT PANELS, BOTTOM-HINGEDItem QtyDescriptionUnshielded Shielded 11-Front panel, hinged, Al, 2.5 mm, anodised, cut edges plain1a-1Front panel, U profile, hinged,Al, 2.5 mm, front anodised, rear iridescent green chromated22 2 (28 HP) / 3Hinge, Zn die-cast, nickel-plated 3 2 / 3 (84 HP)2 (28 HP) / 3Sleeve, PA4 2 / 3 (84 HP)2 (28 HP) / 3Collar screw M2.5 x 12.3, nickel-plated 5-1EMC textile gasket, core: foam,sleeve: textile cladding with CuNi coating611Assembly kitDimensions Height Width Unshielded Shielded U HP Part no.Part no.32820838-28020848-60834220838-27120848-59936320838-27220848-60038420838-27320848-60144220838-27720848-60546320838-27820848-60648420838-27920848-607628–20848-69664220838-27420848-60266320838-27520848-60368420838-27620848-604Shielded Dimensions Unshielded Width AB C D H Part no.Height Width A B C H Part no.HP mm mm mm mm mm U HP mm mm mm mm 328141.9127.0––128.420848-608328141.9127.0–128.420838-280342213.0198.1101.686.4128.420848-599342213.0198.1–128.420838-271363319.7304.8157.5137.2128.420848-600363319.7304.8–128.420838-272384426.4411.5203.2 193.0128.420848-601384426.4411.5203.2 128.420838-273442213.0198.1101.686.4172.920848-605442213.0198.1–172.920838-277463319.7304.8157.5137.2172.920848-606463319.7304.8–172.920838-278484426.4411.5203.2193.0172.920848-607484426.4411.5–172.920838-279628141.9127.0––261.820848-696642213.0198.1101.686.4261.820848-602642213.0198.1–261.820838-274663319.7304.8157.5137.2261.820848-603663319.7304.8–261.820838-275684426.4411.5203.2193.0261.820848-604684426.4411.5203.2261.820838-2767.9Modules –Front panels/SCHROFF |Part number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 10 working days04295002•Suitable for subracks (europacPRO) and cases (ratiopacPRO, propacPRO, compacPRO)•Mounts on horizontal rails •Front panel with textile EMC gasket •Hinges can be fitted on left or rightDELIVERY COMPRISES (kit)ORDER INFORMATIONFRONT PANEL, HINGED, SHIELDEDItem Qty Description11Front panel, hinged, Al, 2.5 mm,front anodised, rear iridescent green chromated 22Hinge, Zn die-cast, chrome-plated 31Textile EMC gasket,core: foam, sleeve: textile cladding with CuNi coating 41Assembly kitHeight H h W w Part no.U mm mm mm mm 3128.489.9426.4203.220848-6116261.8223.2426.4203.220848-617SCHROFF PRODUCT CATALOG E 10/2019/SCHROFFModules –Front panels|Cut-out 9-pin0460814404608145Cut-out 15-pin0460814604608147Cut-out 25-pinUnshielded046081500460815104608149046081480480815204808153For textile EMC gasket • 3 U/4 HP•Aluminium, front anodised, rear irisdescent green chromated•Shielding through: stainless steel EMC or textile EMC gasket (please order separately)DELIVERY COMPRISESORDER INFORMATIONDelivery is exclusively made in Standard Pack Quantity (SPQ): Please order at least 5 pieces or a multiple. Pricing is per individual item.NOTE•Please order fixing material (sleeves, collar screws) separately, see page 7.107•Please order stainless steel EMC gasket separately, see page 7.6•Please order textile EMC gasket separately, see page 7.6FRONT PANELS FOR D-SUB CONNECTORSItem Description1a Front panel, Al, 2.5 mm, front anodised, rear irisdescent green chromated 1b Front panel, Al, 2.5 mm, front anodised, rear iridescent green chromated;for EMC stainless steel gasket1cFront panel, U profile, Al, 2.5 mm, front anodised, rear conductive;for EMC gasket (textile)Cut-outQtyUnshielded For EMC gasket Stainless steel Textile Part no.Part no.Part no.1a1b 1c 1 × 9-polig1 piece (SPQ 5)30118-34130118-34830849-7492 × 9-polig 1 piece (SPQ 5)30118-34430118-35130849-7503 × 9-polig1 piece (SPQ 5)30118-34730118-35430849-7511 × 15-polig1 piece (SPQ 5)30118-34230118-34930849-7522 × 15-polig 1 piece (SPQ 5)30118-34530118-35230849-7531 × 25-polig1 piece (SPQ 5)30118-34330118-35030849-7542 × 25-polig1 piece (SPQ 5)30118-34630118-35330849-7557.11Modules –Front panels/SCHROFF |Part number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 10 working days04602057•3U/4HP•Aluminium, 2.5 mm, front anodised, rear irisdescent green chromatedORDER INFORMATIONNOTE•Please order fixing material (sleeves, collar screws) separately, see page 7.10702998001•Earthed front panel (protection class 1)DELIVERY COMPRISES (items 1–3assembled)ORDER INFORMATIONDelivery is exclusively made in Standard Pack Quantity (SPQ): Please order at least 5 pieces or a multiple. Pricing is per individual item.NOTE•Please order fixing material (sleeves, collar screws) separately, see page 7.107FRONT PANELS FOR COAX CONNECTORSDescriptionQty/PU Part no.Cut-out 4 x Coax, unshielded130118-355FRONT PANELS 3 U WITH GND/EARTHING CONNECTIONItem Qty Description11Front panel 3 U, Al, 2.5 mm, front anodised, rear iridescent green chromated with GND/earthing connection 24Plastic sleeve, PA, grey34Collar screws, M2.5 x 11 and 12.3 Pozidrive, St, nickel-plated41GND/earthing kit, length of GND/earthing cable 320 mmHeight Width QtyPart no.U HP 37 1 piece (SPQ 5)20119-159314 1 piece (SPQ 5)20119-160321 1 piece (SPQ 5)20119-161328 1 piece (SPQ 5)20119-162342120119-163SCHROFF PRODUCT CATALOG E 10/2019/SCHROFFAssemblies –Front panels|•Based on PCI 2.2 specification(PCI = P eripheral C omponent I nterface)•In accordance with PMC mezzanine specification IEEE P 1386•PMC= P CI M ezzanine C ard •For module size 194 x 74 mm 2•In accordance with specification IEEE P1386 (CMC= C ommon M ezzanine C ard)• 6 U/4 HP front panel with stainless steel EMC gasket and front handlesDELIVERY INCLUDES (assembled)ORDER INFORMATIONPMC MEZZANINE FRONT PANELS04615054PMC MEZZANINE FRONT PANEL KIT, SHIELDED, WITH TRAPEZOIDAL EXTRACTOR HANDLE TYPE 1MPA44845Item 3: front panel, item 5: EMC gasket, item 6: front handleItem Qty Description31PMC front panel, Al extrusion, 6U, 4HP, clear passivated 51EMC gasket (St, stainless)62Trapeziform extraxtor handle, type 1Item Description Part No.PMC cover for front panel cutouts for EMC shielding, PMC gasket for mezzanine front panelssee page 7.13PMC gasket for mezzanine front panelssee page 7.137.13Modules –Front panels/SCHROFF |Part number in bold face type: ready for shipping within 2 working days Part number in normal type: ready for shipping within 10 working days•EMC cover to close unused cut-outs in the PMC mezzanine front panels•Material stainless steel, 0.2mm •Colour: black or brightORDER INFORMATIONDelivery is exclusively made in Standard Pack Quantity (SPQ): Please order at least 10 pieces or a multiple.Pricing is per individual item.•Mezzanine front panel is fitted into PMC front panel cut-outs;EMC shielding with conductive O-ring•Material:•Aluminium extrusion (anodised, contact surfaces conductive)•Zinc die-cast (untreated, black or chrome-plated, matt)DELIVERY COMPRISES (kit)ORDER INFORMATIONPMC CUTOUT COVER FOR EMC PROTECTION04610028Item 9: EMC cover; Item 3: front panelColour QtyPart no.Black 1 piece (SPQ 10)60835-024Bright1 piece (SPQ 10)60835-022PMC BEZEL FOR MEZZANINE FRONT PANELS47Item Qty Description41PMC bezel for mezzanine front panel, Zn die-cast or Al extrusion 71EMC gasket (O-ring), Cho-SealPMC mezzaninefront panelQty/PUwith EMC gas-ket without EMC gasket MaterialPart no.Part no.Al extrusion, anodised,contact surfaces conductive 120835-598–Al extrusion, anodised,contact surfaces conductive 1020835-88920835-899Zn die-cast, untreated 120835-890–Zn die-cast, untreated 1020835-89320835-896Zinc die-cast, black, chromated 120835-922–Zinc die-cast, black, chromated 1020835-92420835-931Zinc die-cast, chrome-plated, matt 120835-923–Zinc die-cast, chrome-plated, matt 1020835-92820835-929Cheesehead screw M2.5 × 5 mm, PU 100 pieces 21100-624EMC gasket O-ring, 1 piece(Standard Pack Quantity 10pieces)60835-021SCHROFF PRODUCT CATALOG E 10/2019/SCHROFFAssemblies –Front panels|•FMC = FPGA mezzanine card•For standard defined I/O mezzanine modules which connect to carrier cards•For single 69.0 x 76.5 mm or double 139.0x 76.5 mm modules •In accordance with Vita 57.1 specification•3U or 6U, 4 HP, U-shaped front panels with textile gasketing• 1 or 3 FMC cutouts (depending on height)• 1 or 2 IEL front handles (depending on height)•EMC shielded, both the front panel and the FMC bezelsDELIVERY INCLUDES (assembled)ORDER INFORMATIONFMC MEZZANINE FRONT PANELSFMC MEZZANINE FRONT PANEL KIT, SHIELDED, WITH IEL HANDLE04615050Item Qty Description 3U 6U 111FMC front panel, U profile, Al, 4HP, front anodized,rear conductive, 3U has 1cut out,6U has 3cut outs 211EMC textile gasket for front panel 312IEL handle (handel, black, RAL 9005; button,light grey,RAL 7035)413FMC bezel for front panel cut outs 513EMC gasket (O-ring)611Assembly kitHeight Part no.U7.15Assemblies –Front panels/SCHROFF |Part number in bold face type: ready for shipping within 2 working days Part number in normal type: ready for shipping within 10 working days•FMC bezel is fitted into FMC Mezzanine front panel cut-outs •Material, Al extrusion (anodised, contact surface conductive)•Shielding for FMC bezels with an optional conductive O-ring, please order separatelyORDER INFORMATION•To provide a standoff between mezzanine boards per the IEEE P1386 or VITA 57.1 specification and the carrier cardORDER INFORMATIONDelivery is exclusively made in Standard Pack Quantity (SPQ): Please order at least 10 pieces or a multiple. Pricing is per individual item.Delivery is exclusively made in Standard Pack Quantity (SPQ): Please order at least 10 pieces or a multiple. Pricing is per individual item.EMC BEZEL FOR FMC MEZZANINE FRONT PANEL CUT-OUTS0461002904615053Front panel express solutionDescriptionItemQty/PU Part no.pieceEMC bezel for FMC Mezzanine front panel41020835-849SPACER TO MOUNT PMC AND FMC MEZZANINE BOARDSMPA44850mpa4443704615055Spacer within PMC applicationDescription Item MaterialQtyPart no.Spacer 10St, zinc-plated 1 piece (SPQ 10)60897-27806710007mpa44437coding pin 5V/3.3V11plated1 piece (SPQ 10)60827-02645North AmericaWarwick, RI, USATel +1.800.525.4682San Diego, CA, USATel +1.800.854.7086Europe, Middle East & IndiaStraubenhardt, GermanyTel +49 7082 794 0Betschdorf, FranceTel +33 3 88 90 64 90Warsaw, PolandTel +48 22 209 98 35Hemel Hempstead,Great BritainTel +44 1442 24 04 71Lainate, ItalyTel +39 02 932 714 1Dubai, United Arab EmiratesTel +971 4 37 81 700Bangalore, IndiaTel +91 80 67152000Istanbul, TurkeyTel +90 216 250 7374Asia PacificShanghai, ChinaTel +86 21 2412 6943SingaporeTel +65 6768 5800Shin-Yokohama, JapanTel +81 45 476 0271Our powerful portfolio of brands:CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER/SCHROFF ©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.nVent reserves the right to change specifications without notice.。

Microchip offers a broad portfolio of stand-alone analog and interface solutions that address the thermal management, power management, mixed-signal, linear, interface and safety and security markets.In addition to using low power CMOS technology, Microchip’s analog products are designed to optimize performance while minimizing power consumption.Non-volatile expertise is leveraged to achieve high accuracy specifications without additional manufacturing steps and cost. Chip select/shutdown/sleep features on many of our analog and interface parts enable systems to be selectively shut down to further reduce power consumption.Low operating voltages combined with small form factors such as SC70, DFN and SOT-23 make Microchip’s analog and interface portfolio well-suited for applications with tight power budgets.Typical Applications■Battery powered/Handheld■Consumer■PC Peripherals■Telecommunication■Automotive■IndustrialDesign Tools■CAD/CAE Schematic Symbols and Footprints/cadProduct Selection Tools■Microchip’s Advanced Product Selector/MAPS■Treelink presentation/treelinkStand-Alone Analog and Interface Portfolio Low Power Analog SolutionsPower Management LDO & Switching Regulators Charge PumpDC/DC Converters Power MOSFET DriversPWM Controllers System Supervisors Voltage Detectors Voltage References Li-Ion/Li-Polymer Battery ChargersMixed-SignalA/D ConverterFamiliesDigitalPotentiometersD/A ConvertersV/F and F/VConvertersEnergyMeasurementICsInterfaceCAN PeripheralsInfraredPeripheralsLIN TransceiversSerial PeripheralsEthernet ControllersUSB Peripheral LinearOp AmpsProgrammableGainAmplifiersComparatorsSafety & SecurityPhotoelectricSmoke DetectorsIonization SmokeDetectorsIonization SmokeDetector Front EndsPiezoelectricHorn DriversThermalManagementTemperatureSensorsFan SpeedControllers/Fan FaultDetectorsMotor DriveStepper and DC3Ф BrushlessDC Fan ControllerM i c r o c h i p T e c h n o l o g y I n c o r p o r a t e dInformation subject to change. The Microchip name and logo, the Microchip logo and PIC are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. © 2011 MicrochipTechnology Incorporated. All Rights Reserved. Printed in the U.S.A. 5/11DS22247B *DS22247B*Visit our web site for additional product information and to locate your local sales office.Microchip Technology Inc. • 2355 W. Chandler Blvd. • Chandler, AZ 85224-6199Low Power Analog & Interface Products/analog。

德州仪器/ 德州仪器，欧洲老牌半导体厂商。

公司经营主要有 74系列、CD40系列、TL 系列等。

TI作为一家跨国的半导体公司, 是最早进行开发和销售射频识别产品的公司。

为RFID产品的业界领导供应厂商。

NXP/ NXP 是一家新近独立的半导体公司，由飞利浦公司创立，已拥有五十年的悠久历史。

NXP 提供半导体、系统解决方案和软件、为手机、个人媒体播放器、电视、机顶盒、智能识别应用、汽车以及其它广泛的电子设备提供更好的感知体验。

意法半导体 意法半导体公司是全球最大的半导体公司之一。

ST长期以来一直是中国半导体市场的领导者，公司经营有全系列三端器件，其三端品件有很大市场占有率。

ON 全球高性能电源解决方案的首要供应商，产品有模拟电源转换器件到整流器、二极管、 MOSFET 。

仙童/全球主要的高性能半导体产品的供应商，销售市场包括电源、接口元件、模似、混合讯号、逻辑元件、光电组件、以及可设定产品等。

东芝 东芝半导体，先进的加工技术，高精度的产品开发能力以及对全球客户在宽带设备销售方面的经验，将东芝定位于全球半导体市场的持续领导地位。

产品齐全,公司经营主要有TLP光藕系列。

美国国家半导体 专注基于模拟技术的半导体产品，包括电源管理、图像技术、显示驱动器、音频、放大器和数据转换等领域的独立元件和子系统。

ATME/ATMEL是世界上高级半导体产品设计、制造和行销的领先者。

其产品涵盖了先进的逻辑器件、非易失性存储器、混合信号器件以及RF集成电路。

新日本无线http://www.njr.co.jp/english/index.html JRC公司成立于1915年，是全球著名的射频和无线电技术先驱，也是全球最大的双极型和CMOS线性IC制造商之一。

公司总部设在日本东京，有员工约3800人。

生产的产品包括单片IC、微波IC、混合IC、高密度表面贴装器件、SAW滤波器等 RF集成电路。

瑞萨/ (RENESAS)于2003年4月1日—由日立制作所半导体部门和三菱电机半导体部门合并成立。

Frame Type Plug-in UnitsELECTRONICS PROTECTIONSCHROFF PRODUCT CATALOG 04/2021Frame type plug-in units –KitsAccessories for cabinets and wall mounted cases . . 3Climate control . . 4Electronicscases . . . . . . . . . 5Subracks/19" chassis . . . . . 6Front panels,plug-in units . . . . 7Systems . . . . . . . 8Power supplyunits . . . . . . . . . . 9Backplanes . . . . 10Connectors, front panel component system . . . . . . . 11Appendix . . . . . 120480700219" modules are mechanical components that serve to carry one or more circuit boards. The boards housed in a module are thus combined into a larger electronic function unit that is self-contained and testable. Mechanical dimensions conform to IEC 60297-3-101 / IEEE 1101.1/11 standards, i.e. the so-called 19" standard. These function units are integrated into the subrack or case; their dimensions likewise form a component of IEC 60297-3-101 / IEEE 1101.1/11.The dimension obligations of the standard give only little freedom for individual design of frame typeplug-in units. The aim is therefore to make optimum use of what freedoms regarding dimensions it does allow, e.g. •to maximise the internal space of a plug-in unit and thus create maximum space for electronic components, or•to ensure optimal EMC shielding with minimum loss of mounting space to the shielding componentsStandards•IEC 60297-3-101 / IEEE 1101.1/11OVERVIEWMAIN CATALOGCabinets . . . . . . . 1 Wall mountedcases . . . . . . . . . 22 |/SCHROFFFrame type plug-in units –KitsOVERVIEWFRAME-TYPE PLUG-IN UNITS TO HOUSE PRINTED BOARDS•For PCBs in euroboard format•Kits or configuration from single components •Front panels: unshielded or EMC shieldedFRAME-TYPE PLUG-IN UNITS PRO•Kit or configuration from single components in 3 U and 6U, 8 (42)HP •Shielded and unshielded versions •Side panel with/without cooling fins•For one or several PCBs or one or several connectors •Various possibilities for combining the individual components04808008PLUG-IN UNITS PRO WITH HOOD•Kit in 3 U and 6 U, 5...14HP •Shielded and unshielded versions •For one PCB with one connector04808009HF FRAME-TYPE PLUG-IN UNITS•Kit or configuration from single components in 3 U, 7...28 HP •For shielding against high-frequency radiation •Tube with cooling fins, in extruded aluminium •For one or more PCBs, one or more connectors04892005SERVICEPLUSe.g. individual configuration and assembly e.g. modification (special colours)e.g. customised solutions with modified frame-type plug-in units (special sizes)Overview . . . . . . 7.64Introduction:Product features, productcomparison . . . . 7.66Frame type plug-in units PROFrame typeplug-in units PRO, shielded/unshielded . . . . . . 7.68Frame-typeplug-in units PRO with hood,unshielded . . . . . . 7.83HF plug-in unitsKits 3 U . . . . . . . . . . 7.87ServicePLUSconfiguration . . . . 7.88Accessories for plug-in units see page . . ... . . . 7.52/SCHROFF |3Frame type plug-in unitsSCHROFF PRODUCT CATALOG 04/20210480801404808013Rear view: frame type plug-in unit mounted in subrack04808012Board for slot 1 fixes to the side panel; further boards are fixed with guide rails0480801104808016Sliding cover platesThe frame type plug-in units conform to IEC 60297-3-101.They serve to house standardized PCBs and bulky components.Because of the standardized assembly dimensions the frame type plug-in units can be mounted on guide rails, to be pushed into the subrack, in any order and using any plug-in unit.The robust Al extrusion construction is especially suited for heavy components and the rough handling as "Field Replaceable Unit".DetailsTHE NEW GENERATIONThe EMC version of the front panel was improved for frequencies over 1 GHz by using a conductive textile gasket and a robust U-shaped front panelPush-in cover plates for quick fittingHandles to be bolted-on from the front, easy mountingOptimised air flow rate thanks to slender extruded side panels and large perforation areas in the cover plates, a perforation degree of up to 65% is possible3 cover plate versions (solid, perforated, perforated for guide rail mounting)Width of frame-type plug-in units from 8HPTo achieve a higher airflow rate, exceptionally slender guide rails are used to fix the boardsFrom slot 2 guide rails can be positioned in HP grid Easy fixing of the boards in the frame-type plug-in units; only 2x 1screws per board are needed to fix the boards3 rear panel variants (solid, for one DIN connector, for multiple DIN connectors)The flat rear panel enables simple reworking (e.g. punching); the rear panel can be removed without removing the PCBsFor better EMC contacting between rear panel and cover plate and to increase the stability of broad frame-type plug-in units, a rear panel retainer is availableUse of Torx screws for secure machine mountingNote:Frame type plug-in units cannot be combined with guide rails for CompactPCI or VME64x applications (width 4HP)4 |/SCHROFFFrame type plug-in units/SCHROFF |Part number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 10 working daysCOMPARISON: FRAME-TYPE PLUG-IN UNITS PRO/FRAME-TYPE PLUG-IN UNITS PRO WITH HOODFrame-type plug-in units PRO with hood (shielded)Frame-type plug-in units PRO0480812504808115Only for one PCBFor one or multiple PCBsModular, at least 6 components(front panel,2side panels, 2cover plates,rear panel)Only 3 components(front panel, left hand side panel, hood with integrated rear panel)Identical front panel and front handle Identical front panel and front handle Identical left hand side panel (Al extrusion)Identical left hand side panel (Al extrusion)Side panel on right hand side (Al extrusion)Hood on right hand side (Al sheet)Separate rear panel Hood includes rear panel Widths from 8HP to 42HPWidths from 5HP to 14HPGuiding in subrack/case with 4 guide rails; left and right side panels Guiding in subrack/case with 2guide rails; left side panel3 rear panel variants (for one DIN connector, for multiple DIN connectors, rear panel without cut-out)1 rear panel variant (for one DIN connector)5SCHROFF PRODUCT CATALOG 04/2021Frame type plug-in units PRO•Extruded side panels with groove to rigth and left, to insert a PCB (board position in accordance with standard in left side panel only)• 2 board depths: 160 mm and 220 mm • 2 cover plate versions•with perforation, for guide rails (5a, airflow rate approx. 60%); please order guide rails separately •Without perforation (5b)• 2 rear panel versions•With cut-out for one connector(3a, in accordance with EN 60603-2, DIN 41612)•With cut-out for multiple connectors(3b,in accordance with EN 60603-2, DIN 41612)DELIVERY COMPRISES (Kit)ORDER INFORMATION•Description of individual components, guide rails, dimension drawings, other combinations cover plates/rear panels etc. see from page 7.72FRAME TYPE PLUG-IN UNITS PRO, 3 U KITS, FRONT PANEL SHIELDED (TEXTILE GASKET)04811007Illustration shows 12 HP width, side panel depth 167 mmItem Qty DescriptionFront panel, U profile anodised, rear conductive, alignment pin 11pressed-in21Handle, grey, PPE, UL 94V-1Rear panel, St, zinc-plated, 1.5mm, with cut-out for one 13a connector, incl. PCB fixing (slot 1)3b3c 12Rear panel, St, zinc-plated, 1.5mm, with cut-out for multiple connectors, incl. PCB fixing (slot 1 and slot 2), incl. 2 guide rails rear panel fastener24Side panel, Al extrusion, colourless passivated,with groove for one PCB5a 2Cover plate, St, zinc-plated, 1.0mm, with perforation 25b Cover plate, St, zinc-plated, 1.0mm, without perforation 61EMC sealing (textile)17Assembly kit6 |/SCHROFFFrame type plug-in units PROPart number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 10 working days•Extruded side panels with groove to rigth and left, to insert a PCB (board position in accordance with standard in left side panel only)• 2 board depths: 160 mm and 220 mm • 2 cover plate versions•With perforation, for guide rails (5a, airflow rate approx. 60 %),•please order guide rails separately •Without perforation (5b)• 2 rear panel versions•With cut-out for one connector(3a; in accordance with EN 60603-2, DIN 41612)•With cut-out for multiple connectors(3b;in accordance with EN 60603-2, DIN 41612)• 6 U has cut-outs for connectors at top and bottomDELIVERY COMPRISES (Kit)ORDER INFORMATION•Description of individual components, guide rails, dimension drawings, other combinations cover plates/rear panels etc. see from page 7.72FRAME TYPE PLUG-IN UNITS PRO, 6 U KITS, FRONT PANEL SHIELDED (TEXTILE GASKET)04811008Illustration shows 12 HP width, side panel depth 167 mmItem Qty DescriptionFront panel, U profile anodised, rear conductive, alignment pin 11pressed-in21Handle, grey, PPE, UL 94V-1Rear panel, St, zinc-plated, 1.5mm, with cut-out for one 13a connector, incl. PCB fixing (slot 1)3b3c 12Rear panel, St, zinc-plated, 1.5mm, with cut-out for multiple connectors, incl. PCB fixing (slot 1 and slot 2), incl. 2 guide rails rear panel fastener24Side panel, Al extrusion, colourless passivated,with groove for one PCB5a 2Cover plate, St, zinc-plated, 1.0mm, with perforation 25b Cover plate, St, zinc-plated, 1.0mm, without perforation 61EMC sealing (textile)17Assembly kit/SCHROFF |7SCHROFF PRODUCT CATALOG 04/2021Frame type plug-in units PRO•Extruded side panels with groove to rigth and left, to insert a PCB (board position in accordance with standard in left side panel only)• 2 board depths: 160 mm and 220 mm • 2 cover plate versions•with perforation, for guide rails (5a, airflow approx. 60%);please order guide rails separately •Without perforation (5b)• 2 rear panel versions•With cut-out for one connector(3a, in accordance with EN 60603-2, DIN 41612)•With cut-out for multiple connectors(3b,in accordance with EN 60603-2, DIN 41612)DELIVERY COMPRISES (Kit)ORDER INFORMATION•Description of individual components, guide rails, dimension drawings, other combinations cover plates/rear panels etc. see from page 7.72FRAME-TYPE PLUG-IN UNITS PRO, 3 U KITS, FRONT PANEL UNSHIELDED04811009Illustration shows 12 HP width, side panel depth 167 mmItem Qty DescriptionFront panel, Al, 2.5 mm, anodised, cut edges plain 1121Handle, grey, PPE, UL 94V-1Rear panel, St, zinc-plated, 1.5mm, with cut-out for one 13a connector, incl. PCB fixing (slot 1)3b3c 12Rear panel, St, zinc-plated, 1.5mm, with cut-out for multiple connectors, incl. PCB fixing (slot 1 and slot 2), incl. 2 guide rails rear panel fastener24Side panel, Al extrusion, colourless passivated,with groove for one PCB5a 2Cover plate, St, zinc-plated, 1.0mm, with perforation8 |/SCHROFFFrame type plug-in units PROPart number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 10 working days•Extruded side panels with groove to rigth and left, to insert a PCB (board position in accordance with standard in left side panel only)• 2 board depths: 160 mm and 220 mm • 2 cover plate versions•with perforation, for guide rails (5a, airflow approx. 60%);please order guide rails separately •Without perforation (5b)• 2 rear panel versions•With cut-out for one connector(3a; in accordance with EN 60603-2, DIN 41612)•With cut-out for multiple connectors(3b;in accordance with EN 60603-2, DIN 41612)• 6 U has cut-outs for connectors at top and bottomDELIVERY COMPRISES (Kit)ORDER INFORMATION•Description of individual components, guide rails, dimension drawings, other combinations cover plates/rear panels etc. see from page 7.72FRAME TYPE PLUG-IN UNITS PRO, 6 U KITS, FRONT PANEL UNSHIELDED04811010Illustration shows 12 HP width, side panel depth 167 mmItem Qty DescriptionFront panel, Al, 2.5 mm, anodised, cut edges plain 1121Handle, grey, PPE, UL 94V-1Rear panel, St, zinc-plated, 1.5mm, with cut-out for one 13a connector, incl. PCB fixing (slot 1)3b3c 12Rear panel, St, zinc-plated, 1.5mm, with cut-out for multiple connectors, incl. PCB fixing (slot 1 and slot 2), incl. 2 guide rails rear panel fastener24Side panel, Al extrusion, colourless passivated,with groove for one PCB5a 2Cover plate, St, zinc-plated, 1.0mm, with perforation/SCHROFF |9Frame type plug-in units PRO ServicePLUSINDIVIDUALFRONT PANELS, FRONT HANDLESCOMPONENTSmultiple thereofOrder number includes one packaging unit (PU); delivery is exclusively made in PU10 |/SCHROFFSCHROFF PRODUCT CATALOG 04/2021Frame type plug-in units PRO ServicePLUS INDIVIDUALSIDE PANELS, COVER PLATES, GUIDE RAILS COMPONENTSplease order at least the SPQ quantity or a multipleFrame type plug-in units PRO ServicePLUS INDIVIDUALREAR PANELS, ASSEMBLY MATERIALCOMPONENTSplease order at least the SPQ quantity or a multiplePart no. includes one packing unit (PU); delivery is exclusively made in PUFrame type plug-in units PRO ServicePLUSINDIVIDUAL FIXING MATERIAL (100 PIECES)Frame type plug-in units PRO ServicePLUS INDIVIDUALBOARD FIXINGCOMPONENTSFrame type plug-in units PROSIDE PANEL WITHOUT COOLING FINSDIMENSIONS6 U3 U0480810104808102Depth = 167/227 mmSIDE PANEL WITH COOLING FINSDIMENSIONS6 U3 U04811051Depth = 167/227 mmFrame type plug-in units PROSIDE PANEL REAR ANGLEDIMENSIONS04808103Depth = 167/227 mmSIDE PLATEDIMENSIONS 604808100048080996U for side panel rear angle3 U for side panel rear angleFrame type plug-in units PROFRONT PANELSDIMENSIONSShieldable, for EMC textile gasket Unshielded3UFRONT HANDLEDIMENSIONSDimensions tableWidth WidthHP mm8HP39.210HP49.412HP59.614HP69.721HP105.228HP140.8A4-328e42HP212.0Frame type plug-in units PROREAR PANEL 3 UDIMENSIONSDimensions tablenC B A HPmmmmmm20.1818HP30.2437.0410HP 47.2040.4030.34312HP 57.3650.5640.50514HP 67.5260.7250.66721HP 103.0896.2886.221428HP138.64131.84121.782142HP209.76202.96192.903504808092REAR PANEL 6 UDIMENSIONSFor one connectorFor multiple connectors048080930480809404808095Frame type plug-in units PROGUIDE RAILDIMENSIONS0480809604808088COVER PLATESDIMENSIONSwith perforationfor guide rail mounting048081040480810604808105D = 167/227mmFrame type plug-in units PRO•Mounting pitch for guide rails: 1HP •Min. distance between 2 guide rails: 2HPDIMENSIONS TABLEMOUNTING INSTRUCTIONS FOR GUIDE RAILS IN FRAME TYPE PLUG-IN UNITSDIMENSIONSFront view04809050Slot 20480905104808107TE = HP = F1) Division line2) Guide rail rotated by 180° from standard position 3) The first PCB is held in the extruded side panel, corresponds to standard position (slot 1)4) All additional PCBs are fitted into guide rails (from slot 2) 5) Min. 1HP where slot 1 is not used (slot 2)6) Dependent on construction of connector used (not every connector allows a 2HP fitting)Width of frame type plug-in unit b Max. number of PCBs mountable HPmm slot 1from slot 28–115.08– 1 5) 10110.16 1 6)2–15.245)6)12120.32 2 6)3–25.405) 6)14130.48 3 6)4–35.565) 6)21171.12 7 6)7–66.045) 6)281101.60 10 6)11–106.685) 6)421172.72 17 6)18–177.805) 6)MOUNTING SPACE FRAME-TYPE PLUG-IN UNIT 3U/6UDIMENSIONSFront view0480809804808097Height Width A UHPmm3830.7031040.8631251.0231461.1832196.74328132.30342203.4230.108640.2610650.4212660.5814696.14216131,70286202.82426Frame type plug-in units PRO with hood•Protects a PCB against mechanical damage and deflects electrostatic discharge; for euroboard formats•Suitable in all subracks and these cases:ratiopacPRO/-air, propacPRO and compacPRO•Useable connectors in accordance with EN 60603-2 (DIN 41612)• 2 depths, for 160mm and 220mm boardsDELIVERY COMPRISES (kit)ORDER INFORMATION•Dimension drawings see from page 7.88FRAME TYPE PLUG-IN UNITS PRO WITH HOOD, 3/6 U, FRONT PANEL SHIELDED (TEXTILE GASKET)04808007Illustration shows 12 HP width, side panel depth 167 mmItem Qty DescriptionFront panel, U profile, 2.5 mm, front anodised,11rear conductive, alignment pin pressed-in 21Handle, grey, PPE, UL 94V-131Side panel, Al extrusion, colourless passivated, with groove for one PCB41Hood, Al, 1mm, with perforation, rear panel integratedFrame type plug-in units PRO with hood•Protects a PCB against mechanical damage and deflects electrostatic discharge; for euroboard formats•Suitable in all subracks and these cases:ratiopacPRO/-air, propacPRO and compacPRO•Useable connectors in accordance with EN 60603-2 (DIN 41612)• 2 depths, for 160mm or 220mm boardDELIVERY COMPRISES (kit)ORDER INFORMATION•Dimension drawings see from page 7.88PLUG-IN UNITS PRO WITH HOOD, 3/6 U, FRONT PANEL UNSHIELDED04808002Illustration shows 12 HP width, side panel depth 167 mmItem Qty Description11Front panel, Al, 2.5 mm, anodised, cut edges plain 21Handle, grey, PPE, UL 94V-131Side panel, Al extrusion, colourless passivated, with groove for one PCB41Hood, Al, 1mm, with perforation, rear panel integrated 51Assembly kit (incl. PCB fixing for slot 1)Frame type plug-in units PRO with hoodDIMENSIONS TABLECROSS-SECTION FRAME-TYPE PLUG-IN UNITS PRO WITH HOOD 3U/6UDIMENSIONSDimensions tableHeight Width A U HP mm 3517.523622.603727.6831042.9231253.0831463.246517.226622.306727.3861042.6261257.7861462.940480808204808080DIMENSIONS FRONT HANDLEa4-328eWidthWidth HP mm 524.0629.0734.11049.4Frame type plug-in units PRO with hood3/6U FRAME-TYPE PLUG-IN UNITS PRO WITH HOODDIMENSIONSFront panel unshieldedFront panel shieldable3 U04808111Front panel unshieldedFront panel shieldable6 U0480905304808112Front panel0480906604809067HF frame type plug-in units04892005•With high shielding from high-frequency radiation •To accept boards in HP grid increments •Solid body on all sides, with cooling finsDELIVERY COMPRISES (kit)TECHNICAL DATAORDER INFORMATIONNOTE•Dimension drawings see from page 7.94HF FRAME TYPE PLUG-IN UNITS, 3U KITS, FRONT PANEL SHIELDEDItem Qty Description11Body tube, Al extrusion, black anodised, cut edges plain 21Front panel, Al, 2.5 mm, with lateral grooves forEMC gasket (stainless steel), alignment pin pressed-in, front anodised, rear iridescent green chromated31Plastic handle, trapeziform, PPE, grey, identification plate,Al, anodised, cut edges plain41Rear panel, Al, 1.5mm, etched without cut-outsHF plug-in unit Thermal resistance K/WHP Depth = 167 mm Depth = 227 mm 7 1.68 1.5110 1.62 1.4612 1.56 1.4014 1.50 1.3521 1.060.95280.940.85HF frame type plug-in units ServicePLUSORDER INFORMATIONINDIVIDUAL COMPONENTSHF BODY TUBE, FRONT PANELS WITH HANDLE, REAR PANELSplease order at least the SPQ quantity or a multiplePart no. includes one packing unit (PU); delivery is exclusively made in PUHF frame type plug-in unitsORDER INFORMATIONINDIVIDUAL COMPONENTSSLIDE NUTS, FIXING FOR PCBS, MOUNTING KITplease order at least the SPQ quantity or a multiplePart no. includes one packing unit (PU); delivery is exclusively made in PUHF frame type plug-in unitsORDER INFORMATIONNOTE•Further collar screws and sleeves see page 7.107INDIVIDUAL COMPONENTSFIXING MATERIAL (100 PIECES)HF frame type plug-in unitsHF BODY TUBEDIMENSIONSDimensions tableDimension7 HP10 HP12 HP14 HP21 HP28 HPmm21 × 5.0814 × 5.087 × 5.08–3 × 5.08–n138.78103.2267.66–47.34–A133.0297.4661.9051.7441.5826.34BREAR PANEL WITH/WITHOUT CUT-OUT FOR CONNECTORDIMENSIONS7 HP10, 12, 14, 21, 28 HP7 HP10, 12, 14, 21, 28 HP04807086048070830480708704802053Dimensions tableWidth Amm7HP32.0010HP47.2412HP57.4014HP67,4021HP103.1228HP136.68HF frame type plug-in unitsFRONT PANELSDIMENSIONSDimensions tableWidth Aw mm mm7HP 32.22–10HP 50.4635.5612HP 60.6245.7214HP 70.7855.8821HP 106.3491.4428HP141.90127.00FRONT HANDLEDIMENSIONS Dimensions tableWidth Width HP mm 49.410HP 12HP 59.614HP 69.721HP105.2A4-328e28HP140.8HF frame type plug-in unitsPart number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 10 working days •For fitting of e.g. subracks, wall mounted cases, frame type plug-in units or PSUs on a horizontal rail with lip•Adaptor is bolted to the desired product and can then be clipped onto the lipped horizontal rail (DIN 43880)DELIVERY COMPRISESORDER INFORMATIONADAPTOR FOR HORIZONTAL RAIL MOUNTING0481202111395007 Example: horizontal rail adaptor with lip for 19" PSU Item Qty DescriptionDescription Part no. Adaptor for horizontal rail mounting11000-002/SCHROFF|31North AmericaWarwick, RI, USATel +1.800.525.4682San Diego, CA, USATel +1.800.854.7086Europe, Middle East & IndiaStraubenhardt, GermanyTel +49 7082 794 0Betschdorf, FranceTel +33 3 88 90 64 90Warsaw, PolandTel +48 22 209 98 35Hemel Hempstead,Great BritainTel +44 1442 24 04 71Lainate, ItalyTel +39 02 932 714 1Dubai, United Arab EmiratesTel +971 4 37 81 700Bangalore, IndiaTel +91 80 67152000Istanbul, TurkeyTel +90 216 250 7374Asia PacificShanghai, ChinaTel +86 21 2412 6943SingaporeTel +65 6768 5800Shin-Yokohama, JapanTel +81 45 476 0271Our powerful portfolio of brands:CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER/SCHROFF ©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.nVent reserves the right to change specifications without notice.。

威谱数字交换系统威谱通讯商务平台TDMx-2000型技术手册市华谱电子科技目录1.系统概述 (1)1.1.系统简介 (1)1.2.优势功能 (1)1.3.产品规格 (2)1.3.1.外观介绍 (2)1.3.2.电源要求 (2)1.3.3.环境要求 (2)1.3.4.D、F系列传输距离 (2)1.3.5.B2、X系列传输距离 (2)1.3.6.H系列传输距离 (2)1.3.7.外形尺寸 (3)1.3.8.重量 (3)1.3.9.系统拓扑结构 (3)1.4.结构与容量配置 (4)1.4.1.TDMx-2000型B2系列机柜 (4)1.4.2.TDMx-2000 型B2系列容量配置 (5)1.4.3.TDMx-2000 型X系列容量配置 (5)1.4.4.TDMx-2000型H系列容量配置 (6)1.4.5.TDMx-2000型D系列容量配置 (6)1.4.6.TDMx-2000型D系列DM主机容量配置 (7)1.4.7.TDMx-2000型F系列容量配置 (9)1.4.8.机柜间连接 (10)1.4.9.安装前的准备 (11)1.4.10.主机安装 (11)2.常用功能码操作说明 (14)3.数据简易配置（仅限于B2、H、X系列） (16)3.1.自动装机 (16)3.2.恢复出厂数据（D/DM/F系列） (16)3.3.恢复出厂IP地址 (16)4.威谱系统管理平台 (16)4.1.管理软件登录 (16)4.2.库下载 (17)4.3.端口维护 (17)4.4.功能表维护 (17)4.5.路由表维护 (18)4.6.服务等级维护 (18)4.7.前缀码表维护 (18)4.8.主机设置 (19)4.9.库上传 (20)4.10.语音导航配置 (21)4.11.重启 (21)4.12.保存库 (22)4.13.打开库 (22)5.常用编程实例 (23)5.1.1.分机设定 (23)5.1.2.分机服务等级设定 (23)5.1.3.线使用模式 (23)5.1.4.呼叫转移、呼叫等待设定 (23)5.1.5.数字话机设定 (24)5.1.6.同组代接设定 (24)5.1.7.工作组设定 (24)5.1.8.通话时间限制设定 (24)5.1.9.群功能保护设定 (25)5.1.10.通话音量调节 (25)5.1.11.PC话务台权限设定 (25)5.1.12.限制码设定 (25)5.1.13.外线呼入模式 (26)5.1.14.不同线路呼入不同语音功能 (27)5.1.15.置电脑话务员的应用 (27)5.1.16.电脑话务员语音的录制 (28)5.1.17.PRI数字中继设定 (31)5.1.18.数字中继呼入模式 (31)5.1.19.数字中继汇接 (32)5.1.20.数字中继混合通道模式 (34)5.1.21.一号信令的设置方法 (34)5.1.22.VPN (35)5.1.23.出局号及IP加发的设定 (36)5.1.24.默认出局号修改 (36)5.1.25.计费设定 (36)5.1.26.IVR语音导航设定 (37)5.1.27.数字录音系统设定（限H、D、F系列） (38)5.1.28.公共寻线组设定 (38)5.1.29.呼入加拨前缀设定 (38)5.1.30.自动外转外呼叫功能 (38)5.1.31.随身密码 (39)5.1.32.强插、强拆、监听功能 (39)5.1.33.分机局向限制 (39)5.1.34.分机来电显示限制 (39)5.1.35.话机修改服务等级 (39)5.1.36.修改网管 (40)5.1.37.模拟中继直接转移 (40)5.1.38.缩位拨号 (40)5.1.39.路由允许码设置 (40)5.1.40.语音叫醒功能 (41)5.1.41.外线振铃区分 (41)5.1.42.统一拨0出局 (41)5.1.46.GSM、CDMA无线中继卡设定 (43)5.1.47.白功能 (45)5.1.48.经理秘书功能 (46)5.1.49.服务等级跳转功能 (47)5.1.50.分析功能 (47)5.1.51.黑功能 (47)6.电脑命令行编程 (48)6.1.电脑连接 (48)6.1.1.通过串口连接 (48)6.2.登录 (49)6.2.1.通过超级终端串口登录 (49)6.2.2.通过超级终端TCP/IP登录 (49)6.3.输入规则 (49)6.4.自动装机 (50)6.5.显示网络配置信息 (50)6.6.配置网络 (51)6.7.更改口令 (51)6.8.配置呼叫控制参数 (51)6.9.系统日期/时间参数配置 (52)6.10.系统计费开关 (52)6.11.功能码维护 (53)6.12.读取设备序列号 (53)6.13.激活设备 (53)6.14.重启系统 (54)6.15.退出系统 (54)7.系统升级 (54)7.1.下载 (54)7.2.升级 (54)7.3.注意事项 (54)7.4.主控板 (55)7.5.扩展主控板 (56)7.6.二次电源板 (56)7.7.模拟用户板 (57)7.8.环路中继板 (58)7.9.数字用户板（二代） (59)7.10.信令板 (59)7.11.数字中继板（E1） (60)8.机器常见故障 (60)8.1.常见程序故障的排除 (61)1.系统概述1.1.系统简介威谱数字交换系统TDMx-2000型是市华谱电子科技自主研发的高科技产品，它集数字交换技术、网络技术、数据库技术、CTI技术于一体，既保证了技术的先进性，又保留了使用的简易性和系统的经济性，是传统程控交换机的升级换代产品。

CMS89F23x5B用户手册增强型闪存8位CMOS单片机V1.4请注意以下有关CMS知识产权政策＊中微半导体公司已申请了专利，享有绝对的合法权益。

与中微半导体公司MCU或其他产品有关的专利权并未被同意授权使用，任何经由不当手段侵害中微半导体公司专利权的公司、组织或个人，中微半导体公司将采取一切可能的法律行动，遏止侵权者不当的侵权行为，并追讨中微半导体公司因侵权行为所受的损失、或侵权者所得的不法利益。

＊中微的名称和标识都是中微半导体公司的注册商标。

＊中微半导体公司保留对规格书中产品在可靠性、功能和设计方面的改进作进一步说明的权利。

然而中微半导体公司对于规格内容的使用不负责任。

文中提到的应用其目的仅仅是用来做说明，中微半导体公司不保证和不表示这些应用没有更深入的修改就能适用，也不推荐它的产品使用在会由于故障或其它原因可能会对人身造成危害的地方。

中微半导体公司产品不授权适用于救生、维生器件或系统中作为关键器件。

中微半导体公司拥有不事先通知而修改产品的权利，对于最新的信息，请参考我们的网站目录1.产品概述 (1)1.1功能特性 (1)1.2系统结构框图 (2)1.3管脚分布 (3)1.3.1CMS89F2335B引脚图 (3)1.3.2CMS89F2365B引脚图 (4)1.3.3CMS89F2385B引脚图 (5)1.3.4CMS89F2385B1引脚图 (6)1.3.5CMS89F23A5B引脚图 (7)1.4系统配置寄存器 (8)1.5在线串行编程 (9)2.中央处理器（CPU） (10)2.1内存 (10)2.1.1程序内存 (10)2.1.2数据存储器 (15)2.2寻址方式 (20)2.2.1直接寻址 (20)2.2.2立即寻址 (20)2.2.3间接寻址 (20)2.3堆栈 (21)2.4工作寄存器（ACC） (22)2.4.1概述 (22)2.4.2ACC应用 (22)2.5程序状态寄存器（STATUS） (23)2.6预分频器（OPTION_REG） (25)2.7程序计数器（PC） (27)2.8看门狗计数器（WDT） (28)2.8.1WDT周期 (28)2.8.2看门狗定时器控制寄存器WDTCON (28)3.系统时钟 (29)3.1概述 (29)3.2系统振荡器 (30)3.2.1内部RC振荡 (30)3.2.2外部XT振荡 (30)3.3起振时间 (30)3.4振荡器控制寄存器 (31)4.复位 (32)4.1上电复位 (32)4.2掉电复位 (33)4.2.1概述 (33)4.2.2掉电复位的改进办法 (34)4.3看门狗复位 (34)5.休眠模式 (35)5.1进入休眠模式 (35)5.2从休眠状态唤醒 (35)5.3使用中断唤醒 (35)5.4休眠模式应用举例 (36)5.5休眠模式唤醒时间 (36)6.I/O端口 (37)6.1I/O口结构图 (38)6.2PORTA (40)6.2.1PORTA数据及方向控制 (40)6.2.2PORTA上拉电阻 (41)6.2.3PORTA下拉电阻 (41)6.3PORTB (42)6.3.1PORTB数据及方向 (42)6.3.2PORTB上拉电阻 (43)6.3.3PORTB下拉电阻 (43)6.3.4PORTB电平变化中断 (44)6.4PORTC (45)6.4.1PORTC数据及方向 (45)6.4.2PORTC上拉电阻 (46)6.4.3PORTC下拉电阻 (46)6.5PORTD (47)6.5.1PORTD数据及方向 (47)6.5.2PORTD上拉电阻 (48)6.5.3PORTD下拉电阻 (48)6.6I/O使用 (49)6.6.1写I/O口 (49)6.6.2读I/O口 (49)6.7I/O口使用注意事项 (50)7.中断 (51)7.1中断概述 (51)7.2中断控制寄存器 (52)7.2.1中断控制寄存器 (52)7.2.2外设中断允许寄存器 (53)7.2.3外设中断请求寄存器 (54)7.3中断现场的保护方法 (55)7.4中断的优先级，及多中断嵌套 (55)8.定时计数器TIMER0 (56)8.1定时计数器TIMER0概述 (56)8.2TIMER0的工作原理 (57)8.2.18位定时器模式 (57)8.2.28位计数器模式 (57)8.2.3软件可编程预分频器 (57)8.2.4在TIMER0和WDT模块间切换预分频器 (57)8.2.5TIMER0中断 (58)8.3与TIMER0相关寄存器 (59)9.定时计数器TIMER1 (60)9.1TIMER1概述 (60)9.2TIMER1的工作原理 (61)9.3时钟源选择 (61)9.3.1内部时钟源 (61)9.3.2外部时钟源 (62)9.4TIMER1预分频器 (63)9.5TIMER1振荡器 (63)9.6在异步计数器模式下的TIMER1工作原理 (63)9.6.1异步计数器模式下对TIMER1的读写操作 (63)9.7TIMER1门控 (64)9.8TIMER1中断 (64)9.9休眠期间的TIMER1工作原理 (64)9.10TIMER1控制寄存器 (65)10.定时计数器TIMER2 (66)10.1TIMER2概述 (66)10.2TIMER2的工作原理 (67)10.3TIMER2相关的寄存器 (68)11.模数转换（ADC） (69)11.1ADC概述 (69)11.2ADC配置 (70)11.2.1端口配置 (70)11.2.2通道选择 (70)11.2.3ADC参考电压 (70)11.2.4转换时钟 (70)11.2.5ADC中断 (71)11.2.6结果格式化 (71)11.3ADC工作原理 (72)11.3.1启动转换 (72)11.3.2完成转换 (72)11.3.3终止转换 (72)11.3.4ADC在休眠模式下的工作原理 (72)11.3.5A/D转换步骤 (73)11.4ADC相关寄存器 (74)12.LCD/LED驱动模块 (77)12.1LCD/LED功能使能 (77)12.2LCD/LED功能管脚设置 (77)12.3LED功能COM口设置 (78)12.4LED功能的SEG口设置 (78)12.5LED功能的数据设置 (78)12.6LCD/LED相关寄存器 (80)13.PWM模块（PWM0和PWM1） (84)13.1PWM寄存器 (84)13.2PWM模式 (85)13.2.1PWM周期 (86)13.2.2PWM占空比 (86)13.2.3PWM分辨率 (87)13.2.4休眠模式下的操作 (87)13.2.5系统时钟频率的改变 (87)13.2.6复位的影响 (87)13.2.7设置PWM操作 (87)14.通用同步/异步收发器（USART0和USART1） (88)14.1USART X异步模式 (90)14.1.1USARTx异步发生器 (90)14.1.2USARTx异步接收器 (93)14.2异步操作时的时钟准确度 (96)14.3USART X波特率发生器（BRG） (99)14.4USART X同步模式 (101)14.4.1同步主控模式 (101)14.4.2同步从动模式 (105)15.数据EEPROM存储器和程序存储器控制 (106)15.1概述 (106)15.2相关寄存器 (107)15.2.1EEADR和EEADRH寄存器 (107)15.2.2EECON1和EECON2寄存器 (107)15.3读数据EEPROM存储器 (109)15.4写数据EEPROM存储器 (110)15.5读程序存储器 (111)15.6数据EEPROM操作注意事项 (112)15.6.1写校验 (112)15.6.2避免误写的保护 (112)16.电气参数 (113)16.1极限参数 (113)16.2直流电气特性 (114)16.3ADC电气特性 (115)16.4上电复位特性 (115)16.5交流电气特性 (116)17.指令 (117)17.1指令一览表 (117)17.2指令说明 (119)18.封装 (135)18.1SOP16 (135)18.2SOP20 (136)18.3SOP28 (137)18.4LQFP32 (138)19.版本修订说明 (139)1. 产品概述1.1功能特性型号说明◆ 内存◆ 工作电压范围： 3.0V~5.5V@8MHz- Flash ： 8Kx16 2.5V~5.5V@4MHz - 通用RAM ：344x8 ◆ 工作温度范围：-40℃~85℃ ◆ 8级堆栈缓存器◆ 多种振荡方式- 内部RC 振荡：设计频率8MHz - 外部XT 振荡：最高8MHz ◆ 简洁实用的指令系统（68条指令） ◆ 查表功能◆ 内置WDT 定时器 ◆ 指令周期（单指令或双指令） ◆ 内置低压侦测电路 ◆ 内置LED 驱动模块◆ 中断源- 最多可支持16段8位或8段16位- 3个定时中断- COM 口有大电流驱动能力，可达120mA - RB 口电平变化中断 - SEG 口电流可灵活配置为2~30mA - 其它外设中断 ◆ 内置LCD1/2 Bias COM 驱动模块◆ 定时器- 所有I/O 口都可作为1/2 Bias COM 输出 - 8位定时器TIMER0，TIMER2 - COM 口驱动电流可选 - 16位定时器TIMER1 ◆ 内置两路USART 通信模块◆ PWM 模块- 支持同步主从模式和异步全双工模式- 10位PWM 精度- USART1可配置在RA0/RA1或RC4/RC5或RD1/RD2- 2路输出，可配置在RC2/RC3或RB2/RB3或RB4/RB3口 ◆ 内置64字节数据EEPROM- 可重复擦写100万次 - 2路PWM 共用周期（与TIMER2相关），独立占空比 ◆ 高精度12位ADC- 内建高精度0.6V/1.2V 基准电压 ±1.5% @VDD=2.5V~5.5V T A =25℃±2% @VDD=2.5V~5.5V T A =-40℃~85℃1.2系统结构框图1.3管脚分布1.3.1CMS89F2335B引脚图OSCIN/AN7/RA7VDDRC1/AN17/[RX0/DT0]/[TX0/CK0]/ICSPDAT RC0/AN16/[TX0/CK0]/[RX0/DT0]/ICSPCLK RB4/AN12/[PWM0]RB3/AN11/[PWM1]RB2/AN10/[PWM0]RB1/AN9RB0/AN8GNDINT/[TX1/CK1]/AN20/RC4[RX1/DT1]/AN21/RC5[TX1/CK1]/AN0/RA0[RX1/DT1]/AN1/RA1AN2/RA2T1CKI/OSCOUT/AN6/RA6CMS89F2335B1.3.2 CMS89F2365B 引脚图ICSPDAT/[TX0/CK0]/[RX0/DT0]/AN17/RC1[TX1/CK1]/SEG0/AN0/RA0[RX1/DT1]/SEG1/AN1/RA1SEG2/AN2/RA2VDDICSPCLK/[RX0/DT0]/[TX0/CK0]/AN16/RC0RB7/AN15/COM7RB6/AN14/COM6SEG3/AN3/RA3T0CKI/SEG4/AN4/RA4RA5/AN5/SEG5RB5/AN13/COM5/T1G RB4/AN12/COM4/[PWM0]RB3/AN11/COM3/[PWM1]T1CKI/OSCOUT/SEG6/AN6/RA6GNDOSCIN/SEG7/AN7/RA7RB2/AN10/COM2/[PWM0]RB1/AN9/COM1RB0/AN8/COM0CMS89F2365BVDD GNDRB5/AN13/COM5/T1G RB4/AN12/COM4/[PWM0]RB3/AN11/COM3/[PWM1]RB2/AN10/COM2/[PWM0]RB1/AN9/COM1RB0/AN8/COM0RD5/AN27/SEG13/COM13RD4/AN26/SEG12/COM12RD3/AN25/SEG11/COM11RD2/AN24/SEG10/COM10/[RX1/DT1]RD1/AN23/SEG9/COM9/[TX1/CK1]RD0/AN22/SEG8/COM8ICSPDAT/[TX0/CK0]/[RX0/DT0]/AN17/RC1[PWM0]/AN18/RC2[PWM1]/AN19/RC3INT/[TX1/CK1]/AN20/RC4[RX1/DT1]/AN21/RC5[TX1/CK1]/SEG0/AN0/RA0[RX1/DT1]/SEG1/AN1/RA1SEG2/AN2/RA2SEG3/AN3/RA3T0CKI/SEG4/AN4/RA4SEG5/AN5/RA5T1CKI/OSCOUT/SEG6/AN6/RA6OSCIN/SEG7/AN7/RA7ICSPCLK/[RX0/DT0]/[TX0/CK0]/AN16/RC0CMS89F2385BRA1/AN1/SEG1/RX1/DT1RA0/AN0/SEG0/TX1/CK1RC4/AN20/TX1/CK1/INT RC3/AN19/PWM1RC2/AN18/PWM0RC1/AN17/TX0/CK0/RX0/DT0/ICSPDAT RC0/AN16/TX0/CK0/RX0/DT0/ICSPCLK VDD GNDRB6/AN14/COM6RB5/AN13/COM5/T1G RB4/AN12/COM4/PWM0RB3/AN11/COM3/PWM1RB2/AN10/COM2/PWM0SEG5/AN5/RA5T1CKI/OSCOUT/SEG6/AN6/RA6OSCIN/SEG7/AN7/RA7COM8/SEG8/AN22/RD0TX1/CK1/COM9/SEG9/AN23/RD1RX1/DT1/COM10/SEG10/AN24/RD2COM11/SEG11/AN25/RD3COM12/SEG12/AN26/RD4COM13/SEG13/AN27/RD5COM14/SEG14/AN28/RD6COM15/SEG15/AN29/RD7COM0/AN8/RB0COM1/AN9/RB1T0CKI/SEG4/AN4/RA4CMS89F2385B1R B 6/A N 14/C O M 6R B 5/A N 13/C O M 5/T 1G R B 4/A N 12/C O M 4/[P W M 0]R B 3/A N 11/C O M 3/[P W M 1]R B 2/A N 10/C O M 2/[P W M 0]R B 1/A N 9/C O M 1R B 0/A N 8/C O M 0R B 7/A N 15/C O M 7GNDICSPCLK/[RX0/DT0]/[TX0/CK0]/AN16/RC0ICSPDAT/[TX0/CK0]/[RX0/DT0]/AN17/RC1[PWM0]/AN18/RC2[PWM1]/AN19/RC3INT/[TX1/CK1]/AN20/RC4[RX1/DT1]/AN21/RC5VDDRD6/AN28/SEG14/COM14RD5/AN27/SEG13/COM13RD4/AN26/SEG12/COM12RD3/AN25/SEG11/COM11RD2/AN24/SEG10/COM10/[RX1/DT1]RD1/AN23/SEG9/COM9/[TX1/CK1]RD0/AN22/SEG8/COM8RD7/AN29/SEG15/COM15[R X 1/D T 1]/S E G 1/A N 1/R A 1S E G 2/A N 2/R A 2S E G 3/A N 3/R A 3T 0C K I /S E G 4/A N 4/R A 4S E G 5/A N 5/R A 5T 1C K I /O S C O U T /S E G 6/A N 6/R A 6O S C I N /S E G 7/A N 7/R A 7[T X 1/C K 1]/S E G 0/A N 0/R A 01.4系统配置寄存器系统配置寄存器（CONFIG）是MCU初始条件的FLASH选项。

Solarproducts2Solar fusesREDindicates NEW information ContentsDescription Page Fuse holder and blockselection guide 2-2Volt F uses Size 600Vdc . . . . . . . . . . .PVM. . . . . 13/32˝ x 1 1/2˝. . . . . . . . . 2-4600Vac /300Vdc . . . .PVCF. . . . .CUBEFuse™. . . . . . . . .. 2-5600Vac/dc. . . . . .. . .PVS-R. . . .RK5. . . . . . . . . . . . . . . . . 2-71000Vdc . . . . . . . .. .PV. . . . . . .10x38mm . . . . . .. . . . . . .2-81000Vdc . . . . . . . .. .HPV. . . . . .10x38mm(in-line assembly). . . . . . . .2-91000/1100Vdc. . . .. .PV. . . . . . .14x51mm . . . . . . . . . . .2-101000Vdc . . . . . . . . . .NH. . . . . . .NH Sizes 1, 2, 3. . . . . . . 2-111000Vdc . . . . . . . . . .XL PV. . . . XL Size 01, 1, 2, 3. . .. . .2-121300/1500Vdc . . . .. .PV. . . . . . .14x65mm. . . . . . . . . . . .2-151200/1500Vdc . . . .. .XL PV. . . . XL Size 01, 1, 2, 3. . . . .2-162Solar fuses Holders and blocks for photovoltaic fuses 600 Volts Fuses Volts Page Midget. . . . . . . . . . . . . .PVM. . . . . . . . . . .600V. . . . . . . . . .2-4CF. . . . . . . . . . . . . . . . .CFPV. . . . . . . . . .600V. . . . . . . . . .2-5RK5. . . . . . . . . . . . . . . .PVS-R . . . . . . . . .600V. . . . . . . . . .2-7Holders •TCFH CUBEFuse holder, panel/DIN-Rail mount . . . . . . . . . . . . .1-16•CHM DIN-Rail mount holders . . . . . . . . . . . . . . . . . . . . . . . . . .9-2•HEB in-line holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-46Blocks •Modular knifeblade fuse blocks 250/600V, panel mount . . . . . . . 9-17•RM600 RK5 open fuse blocks . . . . . . . . . . . . . . . . . . . . . . . . . .9-24•BMM midget open fuse blocks. . . . . . . . . . . . . . . . . . . . . . . . . .9-32BMM HEB TCFHR600Modular knifeblade1000 Volts Fuses Volts Page 10x38mm . . . . . . . . . . .PV-_A10. . . . . . . .1000V . . . . . . . . .2-814x51mm . . . . . . . . . . .PV-_A14. . . . . . . .1000/1100V. . . . .2-10NH Sizes 1, 2 and 3 . . . . PV-_ANH . . . . . . .1000V . . . . . . . . .2-1101XL . . . . . . . . . . . . . . .PV-_A-01XL . . . . .1000V . . . . . . . . .2-121XL . . . . . . . . . . . . . . . .PV-_A-1XL . . . . . .1000V . . . . . . . . .2-122XL . . . . . . . . . . . . . . . .PV-_A-2XL . . . . . .1000V . . . . . . . . .2-123L . . . . . . . . . . . . . . . . .PV-_A-3L . . . . . . .1000V . . . . . . . . .2-12Holders •CHPV 10x38 DIN-Rail mount holders . . . . . . . . . . . . . . . . . . . .9-2•CH14 14x51 DIN-Rail mount holders. . . . . . . . . . . . . . . . . . . . .9-2•HEB* 10x38 in-line holders. . . . . . . . . . . . . . . . . . . . . . . . . . . .9-46•HPV in-line holder assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . .9-46* Self certified to 1000Vdc.Blocks•SB1XL-S 01XL and 1XL blocks . . . . . . . . . . . . . . . . . . . . . . . . .2-12•SB2XL-S 2XL blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12•SB3L-S 3L blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12•SD1-D-PV**. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-11•SD2-D-PV**. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-11•SD3-D-PV**. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11** IEC only to 1000Vdc.CHPV CHM CH14HEB SD1-D-PV SB2XL-S SB3L-S HPVSB1XL-SSolarproducts2Solar fuses Holders and blocks for photovoltaic fuses SB2XL-S SB3L-S 1500 Volts Fuses Volts Page 01XL . . . . . . . . . . .PV-_A-01XL-15 . . . .1500V . . . . . . . . .2-161XL . . . . . . . . . . . .PV-_A-1XL-15 . . . . .1500V . . . . . . . . .2-162XL . . . . . . . . . . . .PV-_A-2XL-15 . . . . .1500V . . . . . . . . .2-163L . . . . . . . . . . . . .PV-_A-3L-15 . . . . . .1500V . . . . . . . . . 2-1614x65mm PV-_A14*. . . . . . . . .1300/1500V. . . . .2-15Blocks•SB1XL-S** 01XL and 1XL blocks . . . . . . . . . . . . . . . . . . . . . .2-16•SB2XL-S** 2XL blocks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-16•SB3L-S** 3L blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-16*Available with tags for bolt mounting or 10mm fixings for mounting in modular blocks for 10mm diameter fuses.** IEC only to 1500Vdc.SB1XL-S2Solar fuses13/32˝ x 1 1/2˝ Midget PV fusesRecommended fuse holders and blocks for the PVM fuse Specifications:Description:fast-acting 600Vdc Midget fuses specificallydesigned to protect solor power systems inextreme ambient temperature, high cyclingand low level fault current conditions (reversecurrent, multi-array fault).Dimensions:13⁄32˝ x 1 1⁄2˝(10.3 x 38.1mm).Ratings:Volts— 600Vdc to UL 2579Amps— 4-30AIR— 50kA DC (4-30A)Agency information:UL Listed 2579, Guide JFGA, FileE335324, CSA Component Certified C22.2. RoHS compliant.Features and benefits:•Specifically designed to protect solar power systems inextreme ambient temperature per UL 2579 listed•Capable of withstanding high cycling and low level faultcurrent conditionsTypical applications:•Solar combiner boxes•Solar string protectorsCatalog numbers (amps)PVM-4PVM-7PVM-10PVM-20PVM-5PVM-8PVM-12PVM-25PVM-6PVM-9PVM-15PVM-30PVMData Sheet: 2153Catalog Amp Power loss (watts)number rating n 1.0 x I nPVM-1010 1.0 1.9PVM-1515 1.0 1.7PVM-3030 1.6 2.9I n= Rated currentPower loss (watts)Dimensions - (mm)11CURRENT IN AMPS.01.1110100AMP5AAAAAA1,TIMEINSECONDSSolar products2Solar fusesPhotovoltaic CUBEFuse™PVCF 600VData Sheet: 2155Carton quantity and weightAmp Carton Weight per cartonrating qty.lbs kgPVCF-35-60A12 1.420.65PVCF-70-100A6 1.740.79Catalog symbol:PVCF_RNFast-acting fuse:6 minutes maximum clearing time at 200%rated current for 30 to 60A fuse8 minutes maximum clearing time at 200%rated current for 70 to 100A fuseRatings:Volts— 600VdcAmps— 35-100AIR— 50kA DC (UL and CSA)Agency information:•UL 2579 Listed Fuse: Guide JFGA, File E335324•CSA Certified Fuse: Class C22.2•RoHS compliantOther ratings/specifications:Watts loss at rated current:PVCF35RN: 5.45WPVCF60RN: 7.27WPVCF100RN: 11.50WOperating and storage temperature range:-40 to 90°CMaterial specifications:• Case: glass filled PES (Polyethersulfone)• Terminals: copper alloy• Terminal plating: electroless tinFeatures and product benefits:•Maximize uptime and reliability using fuses designed and list-Low Voltage Fuses - Fuses for PhotovoltaicSystems.•Minimize chances of equipment failure and personnel injurywhen using full range fuses having the industry’s fastestresponse time to low-magnitude faults.•Maximize return on investment with fuses proven towithstand harsh temperatures.•Minimize design time, operating outage time andchanging enviromental conditions.•Simplify compatibility with readily available industrystandard Class CF holders.•Temperature derating: designed to maximize rated capacity inelevated environmental temperatures.•Overload protection: proven to clear faults faster than the ULrequirement.•Power loss: minimal energy consumption leading to increasedefficiency.Recommended fuse holders for Class CF fuses•2Solar fuses Photovoltaic CUBEFuse™ Data Sheet: 2155 Time-current characteristic curves–average melt 100A60A40A 50A 35A2Solar fusesLimitron™ fast-acting fusesData Sheet: 4203PVS-R(600Vac/dc) Class RK5Recommended fuse holders and blocks for Class RK5 fuses•See page 1-32Solar fuses 10x38mm photovoltaic fuses Description:A range 10x38mm, 1000Vdc PV fuses for the protection and isolation of photovoltaic strings. The fuses arespecifically designed for use in PV systems with extreme ambient temperature, high cycling and low fault current conditions (reverse current, multi-array fault) string arrays.flexibility.Basic fuse size:•10x38mm Catalog symbols:1-20A*—PV-(amp)A10F (cylindrical)—PV-(amp)A10-T (bolt mounting)—PV-(amp)A10-1P (single PCB tab)—PV-(amp)A10-2P (dual PCB tab)—PV-(amp)10F-CT (in-line, crimp terminals)25-30A**—PV10M-(amp) (cylindrical)—PV10M-(amp)-CT (in-line, crimp terminals)*Ceramic tube construction.**Melamine tube construction.Time constant:•1-3ms PV Fuse coordination:With thin film cells and 4”, 5” and 6” crystalline silicon cells Agency information:•UL Listed to 2579*, Guide JFGA, File E335324•IEC 60269-6 (gPV)•CSA File 53787, Class 1422-30 (1-15A), 20-30A Pending •CCC (1-20A) (25-30A pending)•RoHS Compliant *Except crimp terminal version that is UL Recognized to UL 2579, Guide JFGA2, File E335324.Features and benefits:•Meets UL and IEC photovoltaic standards for global acceptance •Low watts loss performance for energy efficiency •Low temperature rise performance for more precise sizing •In-line crimp terminal version is easy to apply in wire harness construction Typical applications:•Combiner boxes •Inverters •PV wire harnesses Recommended fuse blocks, holders and fuseclips:Part number Description Data Sheet #BPVM_10265with optional cover CHPV_Lit # 3185with optional open fuse indication 1A3400-09PCB fuseclip 2131HPV-DV-_AIn-line fuse holder assembly 2157Data Sheet: 1012110x38mm fuses — 1000Vdc, 1-30A Catalog numbers (amp)/electrical characteristics:Rated I 2t (A 2s)Cylindrical Bolt PCB fixing PCB fixing Rated volts Interrupting Pre-Total @Watts loss ferrule fixing single pin double pin crimp terminal amps Vdc rating arcing rated volts 0.8I n I n PV-1A10F PV-1A10-T PV-1A10-1P PV-1A10-2P PV-1A10F-CT 1100050kA 0.150.40.8 1.5PV-2A10F PV-2A10-T PV-2A10-1P PV-2A10-2P PV-2A10F-CT 2100050kA 1.2 3.40.6 1.0PV-3A10F PV-3A10-T PV-3A10-1P PV-3A10-2P PV-3A10F-CT 3100050kA 4110.8 1.3PV-3-5A10F PV-3-5A10-T PV-3-5A10-1P PV-3-5A10-2P PV-3-5A10F-CT 3.5100050kA 6.6180.9 1.4PV-4A10F PV-4A10-T PV-4A10-1P PV-4A10-2P PV-4A10F-CT 4100050kA 9.526 1.0 1.5PV-5A10F PV-5A10-T PV-5A10-1P PV-5A10-2P PV-5A10F-CT 5100050kA 1950 1.0 1.6PV-6A10F PV-6A10-T PV-6A10-1P PV-6A10-2P PV-6A10F-CT 6100050kA 3090 1.1 1.8PV-8A10F PV-8A10-T PV-8A10-1P PV-8A10-2P PV-8A10F-CT 8100050kA 332 1.2 2.1PV-10A10F PV-10A10-T PV-10A10-1P PV-10A10-2P PV-10A10F-CT 10100050kA 770 1.2 2.3PV-12A10F PV-12A10-T PV-12A10-1P PV-12A10-2P PV-12A10F-CT 12100050kA 12120 1.5 2.7PV-15A10F PV-15A10-T PV-15A10-1P PV-15A10-2P PV-15A10F-CT 15100050kA 22220 1.7 2.9PV-20A10F PV-20A10-T PV-20A10-1P PV-20A10-2P PV-20A10F-CT 20100050kA 34350 2.1 3.6PV10M-25————25100020kA 3251860* 1.7 2.9PV10M-30————30100020kA 5363360* 1.7 3.3*Total I 2************************************.Solarproducts2Solar fuses 10x38mm photovoltaic in-line assembly Data Sheet: 2157HPV — 1000Vdc Catalog symbol:HPV-DV-(amp)ADescription:Single-pole, non-serviceable photovoltaic in-line fuse holderand fuse assembly in an IP67 dust tight and temporary water immersion resistant insulating boot for use in photovoltaic wire harnesses.Ratings — 1000Vdc Amps — 1-20AIR — 33kA Agency information • UL Listed to 4248-1 and 4248-18. File # E 348242• CSA Component Acceptance, Class 6225 30, File # 47235• CE, RoHS Compliant, IP20 Finger-safe, IP67Conductors • 75°C/90°C Cu Stranded 12-10AWG PV wire T erminals • Crimp connection for single, stranded 12-10AWG PV conductor Boot material • UL 5VA flammability resistant rated elastomer. • UV resistant to UL F1 suitable for outdoor use.Operating and storage temperature range • -40°C to +90°C PackagingBulk packed in cartons, 180 fuse assemblies per carton. Cartonweight 19.3 Lbs (8.7543kg).Fuse assemblies poly bagged with PV fuse element, two insulating boots (for lineside and loadside), and one pressure to the wire harness.Catalog numbers (amps) and fuse elements*HPV catalog number 10x38mmPV fuse part number Amps HPV-DV-1A PV-1A10F-CT 1HPV-DV-2A PV-2A10F-CT 2HPV-DV-2.5A PV-2.5A10F-CT 2.5HPV-DV-3A PV-3A10F-CT 3HPV-DV-3.5APV-3.5A10F-CT 3.5HPV-DV-4A PV-4A10F-CT 4HPV-DV-5APV-5A10F-CT5HPV-DV-6A PV-6A10F-CT 6HPV-DV-8A PV-8A10F-CT 8HPV-DV-10A PV-10A10F-CT 10HPV-DV-12A PV-12A10F-CT 12HPV-DV-15A PV-15A10F-CT 15HPV-DV-20A PV-20A10F-CT 20* For fuse specifications and derating curves see data sheet no. 10121 at/DatasheetsEle.Recommended tools • Sta-Kon™ terminal crimping tool, catalog # ERG4002• Multi-Contact assembly tool, catalog # PV-RWZ with PV-KOI+II and PV-KOIII tapered spindles2Solar fuses 14x51mm photovoltaic fuses Time-current characteristic curves—average melt Dimensions - mmData Sheet: 720132Available current (amps), DC-time constant 1-3ms Recommended fuse holders and blocks for 14x51mm fuses •See page 2-2Features and benefits:•Specifically designed to provide fast-acting protection under low fault current conditions associated with PV systems •High DC voltage rating •Demonstrated performance in extreme temperature cycling conditions Typical applications:•Combiner boxes •Inverters Recommended fuse holder:CH141B-PV DIN-Rail modular fuse holder See data sheet # 720148 for more information.14x51mm fuses — 1000/1100Vdc, 15-32A2-11Solar products2Solar fusesNH photovoltaic fusesBUSSMANN SERIES FULL LINE CATALOG1007—July 2015 /bussmannseries Description:A range of 1000Vdc NH size Photovoltaic (PV) fusesspecifically designed for protecting and isolating arraycombiners/re-combiners, disconnects and inverters.Ratings:Volts— 1000VdcAmps— 32-400AIR— 50kAAgency information:•UL Listed, Guide JFGA, File E335324.Photovoltaic to UL 2579•IEC 60269-6 gPV•CSA Class 1422-30, File 53787 (32-160A)•UL Listed, IEC gPV, CSA, CCC Pending, RoHS compliantCatalog numbers/electrical characteristics:Data Sheet: 720133Features and benefits:•Compact size saves panel space and extends designflexibility•Bolt-on versions have common hole centers forstandardizing busbar designs across 63-400 amp range•Low power loss for greater efficiency and loweroperating temperature•Global agency standards simplifies designconsiderations for worldwide markets•Dual indication feature and optional microswitchesmake system monitoring easierTypical applications:•Recombiner boxes•InvertersRecommended fuse blocks*:Fuse size Fuse blockNH1SD1-D-PVNH2SD2-D-PVNH3SD3-D-PVSee data sheet # 720149 for more information.Optional microswitches*:Tab size/number mm (inch)Connection Volts Amps170H0236250/6.3 (1⁄4)Quick connect2502170H0238110/2.8 (0.11)Quick connect2502BVL50187/4.8 (3⁄16)Quick connect2506 NH fuses — 1000Vdc, NH1, 2, 3, 32-400A*For use with bladed version.FusesizeCurrentrating(amps)Energy integralsI2t (A2S)Watts lossPart numberPre-arcingT otal at1000V0.8InInPV-32ANH1NH1328072048PV-40ANH1NH140185167059PV-50ANH1NH1504003600611PV-63ANH1NH1634704300612PV-80ANH1NH1806405760815PV-100ANH1NH1100130011,700816PV-125ANH1NH1125260023,400917PV-160ANH1NH1160520046,8001427PV-200ANH1NH120010,20082,0001325PV-250ANH2NH225017,000136,0001938PV-300ANH3NH330032,000260,0002440PV-315ANH3NH331532,000260,0002644PV-350ANH3NH335044,500370,0002745PV-355ANH3NH335544,500370,0002846PV-400ANH3NH340067,500550,0003050Blade without bolt-holesSee data sheet No. 720133 for complete details.Part numberwith bolt holesFusesizeCurrentrating(amps)Energy integralsI2t (A2S)Watts lossPre-arcingT otal at1000V0.8InInPV-63ANH1-B NH1634704300612PV-80ANH1-B NH1806405760815PV-100ANH1-B NH1100130011,700816PV-125ANH1-B NH1125260023,400917PV-160ANH1-B NH1160520046,8001427PV-200ANH1-B NH120010,20082,0001325PV-250ANH2-B NH225017,000136,0001938PV-315ANH3-B NH331532,000260,0002644PV-355ANH3-B NH335538,000310,0002948PV-400ANH3-B NH340061,000490,0003250See data sheet No. 720133 for complete details.Blade with bolt-holesRequest Info2-12BUSSMANN SERIES FULL LINE CATALOG 1007—July 2015 /bussmannseries 2Solar fuses1000Vdc XL photovoltaic fuses Data Sheet: 10201Description:protecting and isolating photovoltaic array combiners and disconnects. These fuses are capable of interrupting low overcurrents associated with faulted PV systems (reverse microswitches for use in monitoring systems.Catalog symbols:Blade — PV-(amp)A(size)XL Bolt-In — PV-(amp)A(size)XL-B Agency information:•UL 2579, Guide JFGA, File E335324•IEC 60269-6•CSA Class 1422-30, File 53787•RoHS Compliant Features and benefits:•Specifically designed to provide fast-acting protection under low fault current conditions associated with PV systems •High DC voltage rating •Variety of mounting options for flexibility •Demonstrated performance in extreme temperature cycling conditions Typical applications:•Recombiner boxes •InvertersRecommended fuse holders:Fuse size Part number Description 01XL SB1XL-S 1-pole block 1XL SB1XL-S 1-pole block 2XL SB2XL-S 1-pole block 3L SB3L-S 1-pole block See data sheet # 10066 for more information.Optional microswitches:Blade — 170H0235 or 170H0237 for size 01XL— 170H0236 or 170H0238 for sizes 1XL, 2XL and 3LBolt-in — 170H0069 for all sizes XL fuses — 1000Vdc, XL01, 1, 2, 3, 63-630A Catalog numbers (amp)/electrical characteristics:Rated I 2t (A 2s)Rated volts Interrupting Total @Watts loss Fuse size Bladed version Bolted version amps Vdc rating Pre-arcing rated volts 0.8I n I n PV-63A-01XL PV-63A-01XL-B 63100050kA 26019001324PV-80A-01XL PV-80A-01XL-B 80100050kA 4903600172901PV-100A-01XL PV-100A-01XL-B 100100050kA 87063001832PV-125A-01XL PV-125A-01XL-B 125100050kA 193013,9002040PV-160A-01XL PV-160A-01XL-B 160100050kA 390028,10022441PV-200A-1XL PV-200A-1XL-B 200100033kA 940027,2603160PV-160A-2XL PV-160A-2XL-B 160100033kA 278021,0002544PV-200A-2XL PV-200A-2XL-B 200100033kA 495037,00028502PV-250A-2XL PV-250A-2XL-B 250100033kA 945070,0003460PV-315A-2XL PV-315A-2XL-B 315100033kA 16,600123,0004066PV-350A-2XL PV-350A-2XL-B 350100033kA 26,000192,0004268PV-355A-2XL PV-355A-2XL-B 355100033kA 26,000192,0004268PV-350A-3L PV-350A-3L-B 350100050kA 31,000161,2004065PV-400A-3L PV-400A-3L-B 400100050kA 44,500231,40048823PV-500A-3L PV-500A-3L-B 500100050kA 85,000442,0005085PV-600A-3L PV-600A-3L-B 600100050kA 137,000712,40080108PV-630A-3L*PV-630A-3L-B*630*100050kA 137,000712,40092118*630A thermally rated to UL only.Request Info2-132Solar fuses1000Vdc XL photovoltaic fuses for solar ap plications BUSSMANN SERIES FUL L LINE CATALOG 1007—July 2015 /bussmannseries 2XL blade sizeDimensions - mm (n ot to scale)3L blade size3L bolt size01XL blade size 01XL bolt sizeData Sheet: 7201342XL bolt size Request Info2-14BUSSMANN SERIES FULL LINE CATALOG 1007—July 2015 /bussmannseries 2Solar fuses 1000Vdc XL photovoltaic fuses for solar applications Data Sheet: 720134100100010000160A 125A 100A 200A 0.010.11100001000100101P r e -a r c i n g T i m e (s )63A 80A Time-current curves for 01XL and 1XL Available current (amps), DC-time constant 1-3ms Time-current curves for 2XLAvailable current (amps), DC-time constant 1-3ms Time-current curves for 3L Available current (amps), DC-time constant 1-3ms2-152Solar fuses 14x65mm photovoltaic fuses BUSSMANN SERIES FULL LINE CATALOG 1007—July 2015 /bussmannseries 14x65mm fuses — 1300/1500Vdc, 2.25-32A Features and benefits:•Specifically designed to provide fast-acting protection under low fault current conditions associated with PV systems •Variety of mounting options for flexibility •Fuses meet UL and IEC photovoltaic standards for global product acceptance Data Sheet: 1172Request Info2-16BUSSMANN SERIES FULL LINE CATALOG 1007—July 2015 /bussmannseries 2Solar fuses 1500Vdc XL photovoltaic fuses Data Sheet: 10201Description:protecting and isolating photovoltaic array combiners and disconnects. These fuses are capable of interrupting low microswitches for use in monitoring systems.Catalog symbols:Blade — PV-(amp)A(size)XL-15Bolt-In — PV-(amp)A(size)XL-B-15Agency information:•UL Listed, Guide JFGA, File E335324. Photovoltaic to UL 2579•IEC 60269-6 gPV •CSA Class 1422-30, File 53787•RoHS compliant Features and benefits:•Specifically designed to provide fast-acting protection PV systems •Variety of mounting options for flexibility Typical applications:•Recombiner boxes •InvertersRecommended fuse holders:Fuse size Part number Description 01XL SB1XL-S 1-pole block 1XL SB1XL-S 1-pole block 2XL SB2XL-S 1-pole block 3L SB3L-S 1-pole block See data sheet # 10066 for more information.Optional microswitches:Blade — 170H0235 or 170H0237 for size 01XL— 170H0236 or 170H0238 for sizes 1XL, 2XL & 3LBolt-in — 170H0069 for all sizes XL PV fuses — 1500Vdc, XL01, 1, 2, 3, 50-400A Catalog numbers (amp)/electrical characteristics:Rated I 2t (A 2s)Rated volts InterruptingTotal @Watts loss Fuse size Bladed version Bolted version amps Vdc rating Pre-arcing rated volts 0.8I n I n PV-50A-01XL-15PV-50A-01XL-B-1550150030kA 7510001425PV-63A-01XL-15PV-63A-01XL-B-1563150030kA 3622250152601PV-80A-01XL-15PV-80A-01XL-B-1580150030kA 56533001935PV-100A-01XL-15PV-100A-01XL-B-151********kA 110066002240PV-125A-01XL-15PV-125A-01XL-B-151********kA 220010,5002342PV-160A-01XL-12PV-160A-01XL-B-12160120030kA 500024,0002652PV-100A-1XL-15PV-100A-1XL-B-151********kA 1250600024431PV-125A-1XL-15PV-125A-1XL-B-151********kA 195093602552PV-160A-1XL-15PV-160A-1XL-B-151********kA 420020,1603058PV-200A-1XL-15PV-200A-1XL-B-152********kA 940045,1203161PV-125A-2XL-15PV-125A-2XL-B-151********kA 220015,00025442PV-160A-2XL-15PV-160A-2XL-B-151********kA 500032,0002948PV-200A-2XL-15PV-200A-2XL-B-152********kA 880051,0003257PV-250A-2XL-15PV-250A-2XL-B-152********kA 16,60085,0004070PV-250A-3L-15PV-250A-3L-B-152********kA 22,30092,00032503PV-315A-3L-15PV-315A-3L-B-153********kA 38,000160,0003666PV-355A-3L-15PV-355A-3L-B-153********kA 44,500184,0004480PV-400A-3L-15PV-400A-3L-B-15400150030kA58,000240,0004991Request Info2-17Solar products2Solar fuses1500Vdc XL photovoltaic fusesBUSSMANN SERIES FULL LINE CATALOG1007—July 2015 /bussmannseriesDimensions - mm (not to scale)Bladed - size 01XL, 1XL, 2XL and 3L1XL blade size1XL bolt size2XL blade size3L blade size3L bolt size01XL blade size01XL bolt sizeData Sheet: 7201342XL bolt sizeRequest Info2-18BUSSMANN SERIES FULL LINE CATALOG1007—July 2015 /bussmannseries2Solar fuses1500Vdc XL photovoltaic fusesData Sheet: 720134Time-current curves for 01XL - 1500VdcAvailable current (amps), DC-time constant 1-3msTime-current curves for 1XL - 1500VdcAvailable current (amps), DC-time constant 1-3ms Time-current curves for 2XL - 1500VdcAvailable current (amps), DC-time constant 1-3msTime-current curves for 3L - 1500VdcAvailable current (amps), DC-time constant 1-3msRequest Info。

VERTICAL MACHININGCENTERPARTS LISTV42iWLEADERWAY CNC TECHNOLOGIES CO., LTD.NO. 36, Ln. 211, Taiming Rd.,Wuri Dist, TAICHUNG 41468, TAIWANTEL: +886-4-2335-0711FAX: +886-4-2335-0986台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F11051主軸頭+立柱單元SPINDLE HEAD + COLUMN UNITV42iW00103500010B0調整檔塊ADJUSTABLE STOPPER3140\SS41200203500012B0滑座壓塊SLIDING BLOCK,ADJUSTABLE BRA3210\SS41400303582170A0主軸頭SPINDLE HEAD1010\3582170A2\FC30100403582171A0立柱COLUMN 1020\3582171A2\FC-30100503582196A0Z軸下摺動罩LOWER TELESCOPIC COVER, Z 9400\SPCCZ100603582197A0Z軸防屑擋板PLATE FOR CHIP 7210\200703582198A0碰塊座支撐架RIGHT DOG BRACKET SUPPORTER SS41100803582199A0微動開關座(Z)MICRO SWITCH BRACKET, Z AXIS 3160\SS41100904800143204微動開關MICRO SWITCH BNS819-B02-D12-61-12-10BALLU1010********B0碰塊座DOG BRACKET 4140\AL(125m/m*3軌)201103500081A0碰塊DOG 3140\SS41(42m/m)201203540007A0碰塊DOG 4140\AL 外購65L101303985075A0線性滑軌-Z軸LINEAR GUIDE9840\#35滾柱型101404080106015直銷(軸承鋼針)PINφ6x15L5801503582201A0主軸頭右側蓋板RIGHT COVER, SPINDLE HEAD7510\SPCC101603582202A0主軸頭左側蓋板LEFT COVER, SPINDLE HEAD7510\SPCC101703582203A0主軸頭前蓋板FRONT COVER,SPINDLE HEAD7510\SPCC101803582204A0主軸聯動管支架CONDUIT BRACKET7210\SPCC101903582205A0主軸頭側壓克力板ACRYLIC PLATE, SIDE OF SPIND4360\ACRY1020********A0主軸頭右側架RIGHT BRACKET, SPINDLE HEAD7510\SPCC1021********A0主軸頭外側蓋板SIDE COVER,SPINDLE HEADSTOCK7510\SPCC102204640065133方型聯動管WIRE CONDUITK Y-CE(CBS65.2)-65x133-(22目)102304210550003總流量控制組COOLANT NOZZLE MANIFOLD J TM-01控制組\5/8"插心1024********B0近接開關座PROXIMITY SWITCH BRACKET 7160\SPCC1025********A0刀具釋放指示牌NAME PLATE4350\AL1<結 束>台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F16015配重單元COUNTER BALANCE UNITV42iW00103582190A0配重COUNTER BALANCE3070\SS41100203500006C0鏈輪軸固定座SPROCKET SHAFT BRACKET1210\FC-25\3500006A2200303500021A0鏈條滾輪ROLLER3260\S45C400403500022C0鏈輪軸SHAFT SPROCKET 3260\S45C400504060700025C型扣環(軸用)C TYPE RETAINER RING S-25800604400206205深槽滾珠軸承BEARING 6205ZZ800703500416A0配重滑塊SLIDING BLOCK,COUNTER BALANC 4370\MC200803582191A0配重導桿GUIDING ROD, COUNTER BALANCE 4290\圓棒100904062006025軸心固定座SHAFT BRACKET SHF25-M61010********C0滑軌下固定板LOWER FIXED PLATE, GUIDING R 7180\SPCC101103582192A0滑軌上固定板UPPER FIXED PLATE, GUIDING R 7180\SPCC101203582193A0滑軌上固定板支架BRACKET FOR UPPER FIXED PLAT 7180\SPCC101303582194A0鏈條保護蓋(左)PROTECTING COVER FOR CHAIN7510\SPCC101403582195A0鏈條保護蓋(右)PROTECTING COVER FOR CHAIN7510\SPCC101503500023A0鏈條連結螺絲CHAIN CONNECTING BOLT4310\SCM4401604610050073鏈條CHAIN50x73P (含2鏈目)2<結 束>台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁規 格用量主件品號序號元件品號品 名英文品名2F27004打刀單元V450/V33i/V42iBOSSTING CYLINDER UNIT3180\SS411 00113500008B0增壓缸固定座TOOL RELEASE CYLINDER BRACKE00213500009B0浮動打刀拉座3250\S45C1TOOL RELEASE CYLINDER SEAT00313500019B0固定軸套3290\S45C4FIXED ROD00403980001A0增壓缸(3Tx13L)98801TOOL RELEASE CYLINDER<結 束>台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F28046主軸皮帶輪單元SPINDLE BELT UNITV42iW/SJ-V15-01ZT-S02(F)00103500011B0主軸馬達固定板FIXED PLATE FOR MOTOR3170\SS41100203971061A0齒型皮帶輪PULLEY3270\S45C染黑\5GT-72T\ψ66100303600135A0軸壓蓋(∮48)SHAFT END COVER3240\S45C100404061248055迫緊環PACKING RING TLK300 48x55200504601035920齒型皮帶(剖溝)PULLEY BELT5GT*35*9201<結 束>台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F28047主軸皮帶輪單元SPINDLE BELT UNITV42iW/β8i*8000rpm00103500011B0主軸馬達固定板FIXED PLATE FOR MOTOR3170\SS41100203971008A0齒型皮帶輪(5GT-75T)PULLEY3270\S45C100303580161A0馬達軸端蓋SHAFT END COVER3170\S45C100404061232036迫緊環PACKING RING TLK300 32x36200504601035935齒型皮帶(剖溝)PULLEY BELT5GT*35*935mm1<結 束>台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F13026底座+鞍座+工作台單元BASE + SADDLE + TABLE UNITV42iW00103582172A0底座BASE1030\3582172A2\FC-30100203580410A0地基螺絲(M36*2P)FOUNDATION BOLT3310\S45C600303580411A0地基螺帽(M36*2P)FOUNDATION BOLT3310\S45C600403600047B0墊塊 (地基螺絲)FOUNDATION PAD 3230\S45C600503582001A0噴水座NOZZLE TUBE BRACKET 3150\SS41200603582184A0大護罩前支架FRONT BRACKET, GUARD 7210\SPCC200703582212A0導油槽OIL TROUGH 7520\SPCC100803582173A0鞍座SADDLE 1040\FC-30100903985073A0線性滑軌-Y主LINEAR GUIDE 9840\市購品1010********A0線性滑軌-Y副LINEAR GUIDE 9840\市購品101103582006A0壓塊SLIDING BLOCK 412010601203582183A0螺絲襯套BUSHING 4230\不鏽綱801303582185A0Y軸前摺動罩Y AXIS TELESCOPIC COVER UNIT7400\SPCCZ101403582186A0Y軸後摺動罩Y AXIS TELESCOPIC COVER UNIT7400\SPCCZ101503582187A0Y軸摺動罩支架(上)TELESCOPIC COVER BRACKET7210\SPCC201603582188A0Y軸摺動罩支架(下)TELESCOPIC COVER BRACKET7210\SPCC201703582189A0鞍座下擋屑板BAFFLE PLATE7510\SPCC201803582245A0聯動管連結座CONDUIT BRACKET7210\SPCC101904640015090方型聯動管WIRE CONDUITCECBO02-26x58-222(15P)/R901020********A0碰塊DOG3140\SS41(42m/m)4021********B0碰塊座DOG BRACKET4140\AL(125m/m*3軌)1022********A0碰塊座DOG BRACKET4140\AL(90m/m*3軌)1023********A0碰塊DOG 4140\AL 外購65L2024********B0碰塊座DOG BRACKET 4140\AL(300m/m*2軌)202504800143204微動開關MICRO SWITCH BNS819-B02-D12-61-12-10BALLU202603582168B0微動開關固定座-Y上SWITCH BRACKET 7160\SPCC1027********B0微動開關固定座-Y下SWITCH BRACKET 7160\SPCC1028********A0工作台TABLE 1050\3582174A2\FC-301029********D0螺帽座BALLSCREW HOUSING 1080\FC-25\3581025A2103003560121B0塞頭(工作台)TABLE SEALED CORK3310\SS4116<續下頁>台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第2頁主件品號序號元件品號品 名英文品名規 格用量2F1302603103985050A0X軸線性滑軌LINEAR GUIDEBRH35AL2-P-ZZ-L1800 II103203582179A0X軸摺動罩X AXIS TELESCOPIC COVER UNIT7400\SPCCZ203303582180A0X軸摺動罩上支架TELESCOPIC COVER BRACKET7180\SPCC403403582181A0X軸摺動罩支架(左)TELESCOPIC COVER BRACKET7180\SPCC20350*******A0X軸摺動罩支架(右)TELESCOPIC COVER BRACKET 7180\SPCC203603582175A0碰塊座連結塊(X)CONDUIT FOR DOG(X)3180\SS4120370*******A0微動開關座(X)MICRO SWITCH BRACKET, X AXIS 7160\SPCC103803582178A0工作台後飾板REAR PLATE,TABLE 7510\SPCC103903582177A0工作台前飾板FRONT PLATE, TABLE 7510\SPCC104003582065C0X軸分油座OIL DISTRIBUTOR BRACKET 7210\SPCC10410*******B0油分配器座(Y軸)DISTRIBUTOR BRACKET 7210\SPCC104204640028849塑鋼製鏈條式聯動管ELECTRICAL CONDUIT UNIT1台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F21028X軸傳動單元X AXIS TRANSMISSION UNITV42iW00103170053B0軸承隔環BEARING SPACER3230\SCM4100203170054B0前迷宮環座LAMINAL RING BRACKET3250\SCM4200303170057B0軸承隔環BEARING SPACER3230\SCM4100403170067A0預拉彈簧檔片PRELOAD SPRING STOPPER 3230\S45C100503170070A0Z軸尾端軸承座REAR BEARING HOUSING 1080\S45C100603560016B0軸承壓蓋BEARING CAP 3240\SCM4100703560017B0防撞膠塊RUBBER CUSHION 4370\請改下3560017C0200803560018G0防撞膠塊固定座RUBBER CUSHION BRACKET 3240\SCM4100903560019B0防撞膠固定座RUBBER CUSHION BRACKET 3230\S45C1010********F0Z軸尾端軸承座壓板PUSHING PLATE,BEARING HOUSI 3120\SCM4101103560132B0尾端座蓋板REAR BEARING HOUSING COVER 3180\SPCC101203581022B0尾端座(X軸)REAR BEARING HOUSING 1080\FC-25\3581022B2101303581027B0傳動座TRANSMISSION HOUSING1080\FC-25\3581027B2101403984063A0滾珠導螺桿(X軸)BALL SCREW9860\V42iW101504020401030鎖緊螺帽LOCK NUTMK30101604020403035鎖緊螺帽LOCK NUTMF35(M35xP1.5)101704050175012壓縮彈簧COMPRESSIVE SPRINGφ1.25Xφ7.5X12L801804061306828迷宮環LAMINAL RINGFK3-AS 62/2.8/0.82601904402030062螺桿軸承BALL SCREW BEARINGBS30M62/15-P4A.DUM102004402435072螺桿軸承BALL SCREW BEARINGBS35/72/15TUM1021********A0傳動座蓋板TRANSMISSION HOUSING COVER7180\SPCC1022********D0迷宮環座LAMINAL RING BRACKET3250\SCM4102304061300001迷宮環LAMINAL RING FK3-AS 68/2.8/0.82302404080508050斜梢SLIDE PIN#8x50L(附內牙)4台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F22024Y軸傳動單元Y AXIS TRANSMISSION UNITV42iW00103170053B0軸承隔環BEARING SPACER3230\SCM4100203170054B0前迷宮環座LAMINAL RING BRACKET3250\SCM4200303170057B0軸承隔環BEARING SPACER3230\SCM4100403170067A0預拉彈簧檔片PRELOAD SPRING STOPPER 3230\S45C100503170070A0Z軸尾端軸承座REAR BEARING HOUSING 1080\S45C100603560016B0軸承壓蓋BEARING CAP 3240\SCM4100703560018G0防撞膠塊固定座RUBBER CUSHION BRACKET 3240\SCM4100803560019B0防撞膠固定座RUBBER CUSHION BRACKET 3230\S45C100903560023F0Z軸尾端軸承座壓板PUSHING PLATE,BEARING HOUSI 3120\SCM41010********B0尾端座蓋板REAR BEARING HOUSING COVER 3180\SPCC101103560374A0防撞膠塊RUBBER CUSHION 4370\PU201203581022B0尾端座(X軸)REAR BEARING HOUSING 1080\FC-25\3581022B2101303581027B0傳動座TRANSMISSION HOUSING1080\FC-25\3581027B2101403984062A0滾珠導螺桿BALL SCREW9860\市購品4150H\Y軸101504020401030鎖緊螺帽LOCK NUTMK30101604020403035鎖緊螺帽LOCK NUTMF35(M35xP1.5)101704050175012壓縮彈簧COMPRESSIVE SPRINGφ1.25Xφ7.5X12L801804061306828迷宮環LAMINAL RINGFK3-AS 62/2.8/0.82601904402030062螺桿軸承BALL SCREW BEARINGBS30M62/15-P4A.DUM102004402435072螺桿軸承BALL SCREW BEARINGBS35/72/15TUM1021********A0傳動座蓋板TRANSMISSION HOUSING COVER7180\SPCC1022********D0迷宮環座LAMINAL RING BRACKET3250\SCM4102304061300001迷宮環LAMINAL RING FK3-AS 68/2.8/0.82302404080508050斜梢SLIDE PIN#8x50L(附內牙)4台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F23020Z軸傳動單元Z AXIS TRANSMISSION UNITV42iW00103170053B0軸承隔環BEARING SPACER3230\SCM4100203170054B0前迷宮環座LAMINAL RING BRACKET3250\SCM4200303170057B0軸承隔環BEARING SPACER3230\SCM4100403560022A0預拉彈簧擋片PRELOAD SPRING STOPPER 3230\S45C100503170070A0Z軸尾端軸承座REAR BEARING HOUSING 1080\S45C100603560016B0軸承壓蓋BEARING CAP 3240\SCM4100703560019B0防撞膠固定座RUBBER CUSHION BRACKET 3230\S45C200803560023F0Z軸尾端軸承座壓板PUSHING PLATE,BEARING HOUSI 3120\SCM4100903560132B0尾端座蓋板REAR BEARING HOUSING COVER 3180\SPCC1010********A0防撞膠塊RUBBER CUSHION 4370\PU201103581022B0尾端座(X軸)REAR BEARING HOUSING 1080\FC-25\3581022B2101203581027B0傳動座TRANSMISSION HOUSING 1080\FC-25\3581027B2101313984064A0滾珠螺桿(Z)Z AXIS BALL SCREW9860\市購品101404020401030鎖緊螺帽LOCK NUTMK30101504020403035鎖緊螺帽LOCK NUTMF35(M35xP1.5)101604050175012壓縮彈簧COMPRESSIVE SPRINGφ1.25Xφ7.5X12L801704061306828迷宮環LAMINAL RINGFK3-AS 62/2.8/0.82601804402030062螺桿軸承BALL SCREW BEARINGBS30M62/15-P4A.DUM101904402435072螺桿軸承BALL SCREW BEARINGBS35/72/15TUM1020********A0傳動座蓋板TRANSMISSION HOUSING COVER7180\SPCC1021********B0軸承隔環BEARING SPACER3230\SCM4102204020402035鎖緊螺帽LOCK NUTMR35(M35xP1.5)1 02304080508050斜梢SLIDE PIN#8x50L(附內牙)4英文品名2F50038外型護罩單元LOWER ENCLOSURE GUARD UNITV42iW00103582231A0大護罩LARGE COVER7500\SPCC100203582229A0左後護罩(L) REAR GUARD7500\SPCC100303582230A0右後護罩(R) REAR GUARD7500\SPCC100403582232A0左前門(L) FRONT DOOR 7480\SPCC100503582233A0右前門(R) FRONT DOOR 7480\SPCC100603582234A0前門側擋水板FRONT DOOR PLATE 7210\SPCC200703581295A0前門定位板ORIENTATION PLATE 7210\SPCC200803582236A0護罩前飾條RUBBER RIBBON, TELESCOPIC BA 4510\SUS 303100903582235A0下門軌LOWER DOOR GUIDE 7130\SPCC1010********A0前門下門輪支架LOWER DOOR WHEEL BRACKET 7110\SPCC401103520054C0門輪DOOR WHEEL 3260\S45C401203520055A0門輪DOOR WHEEL 3260\S45C401304060600028C型扣環(孔用)C TYPE RETAINER RINGR-28401404060700012C型扣環(軸用)C TYPE RETAINER RINGS-12401504400206001深槽滾珠軸承BEARING6001ZZ 12x28x8401604300460100管型把手(加高)HAHDLEU1-600L-100H201703560146B0前門壓克力ACRYLIC PLATE, FRONT DOOR4360\ACRY201803560169B0壓克力壓板LOCKING PLATE, DOOR ACRYLIC7120\SPCC201903582049A0上門輪座DOOR WHEEL BRACKET7110\SPCC202004402000628軸承BEARING628ZZ 8*24*8 日本12021********D0護罩壓克力SIDE DOOR ACRYLIC PLATE4360\ACRY2022********A0側門飾條RUBBER RIBBON4510\SUS303光面2023********B0側門把手座SIDE DOOR HANDLE BRACKET 7180\SPCC402404300401421把手 (染黑)HAHDLE A-42-A402504090500403鎖頭LOCK C-403(長型)七星小S402604720700081工作燈WORKING LIGHT HT-S81/24V 70W1027********A0工作燈座WORKING LIGHT BRACKET 7210\SPCC1028********A0右上蓋板RINGHT SIDE COVER 7510\SPCC1029********A0伸臂蓋板OUTSTRETCHED ARM COVER 7180\SPCC103003582238A0左後飾板REAR PLATE7510\SPCC1英文品名2F5003803103582239A0左後飾板支撐座BRACKET, REAR PLATE7180\SPCC103203582240A0右後飾板後蓋板BRACKET, REAR PLATE7180\SPCC103303582241A0油冷機門DOOR OF OIL COOLER7510\2t SPCC103404300421602門扣把手DOOR LOCKB-010長軸(六角型)+B-1602(取手103504300401024門扣把手檔板DOOR LOCK PLATE B-01024103603582242A0電器箱下飾板REAR BRACKET POWER CABINET 7450\10370*******A0右下飾板(R) LOWER PLATE 7510\SPCC103803582244A0前下飾板LOWER PLATE 7510\SPCC103903560696A0水槍座WATER GUN SEAT 7210\SPCC104003560697A0風槍座AIR GUN SEAT7210\SPCC1台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F51038水箱單元(螺旋式排屑)COOLANT TANK UNIT(COIL TYPEV42iW00103582228A0導屑槽(螺旋式)CHIP TRAUGH7520\SPCC100203582068B0螺旋捲屑器CHIP CONVEYOR9570100304440800015排屑器馬達CONVEYOR MOTOR1/4HP 1:100 FME22100403582069B0排屑炮管(附蓋及防漏膠墊)CHIP THROUGH TUBE 7570\SPCC100503582072E0水箱COOLANT TANK 7580\SPCC100603582073E0水箱蓋COOLANT TANK COVER 7510\SPCC100703582125A0過濾擋水板WATER BAFFLE 7210\SPCC100803582102B0蓄屑盤CHIP PLATE 7520\SPCC100903582103C0蓄屑槽FILTER NET 7590\SPCC1010********B0水箱遮水板DASH BOARD 7180\SPCC101103500428A0管接頭座CONNECTOR BRACKET 3150\S45C101204300401421把手 (染黑)HAHDLE A-42-A201304430040303切削液泵浦(直立式)COOLANT PUMPTPHK4T3-2S101404510100001油表COOLANT LEVEL GAUGE3''101504530012424水用電磁閥KSDSOLENOID VALVEJB4K-24V(1/2")2<結 束>台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F52025電氣箱單元POWER CABINET UNITV42iW00103582207A0電氣箱POWER CABINET7450\SPCC100203582208A0電氣箱左門(L) DOOR, POWER CABINET7450\SPCC100303582209A0電氣箱右門(R) DOOR, POWER CABINET7450\SPCC100403582210A0電氣箱門調整組ADJUSTING SET FOR POWER CAB 7450\SPCC400503582211A0電氣箱支架BRACKET FOR POWER CABINET 7450\SPCC100603582220A0I/O基板(上)I/O BOARD(UPPER)7560\3t SPCCZ100703582221A0I/O基板(下)I/O BOARD(LOWER)7560\SPCCZ100803500149B0主電源開關座MAIN POWER SWITCH BRACKET 7160\SPCC100903500150C0左右調整座ADJUSTABLE BRACKET 7160\SPCC1010********A0電器箱聯動管支架CONDUIT BRACKET 7210\SPCC101103582219A0聯動管支架蓋板COVER FOR CONDUIT BRACKET 7210\SPCC101203582215A0電磁閥配置板VALVE BRACKET 7210\SPCC101304090500403鎖頭LOCKC-403(長型)七星小S301404560300010熱交換器HEAT EXCHANGERHPW-10AR/EA-2A1<結 束>台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F53054操作箱單元 三菱-70MOPERATION CABINET UNITV42iW00103582222A0伸臂OUTSTRETCHED ARM7470\SPCC100203582223A0伸臂上蓋板(A)OUTSTRETCHED ARM COVER7180\SPCC100303582224A0伸臂上蓋板(B)OUTSTRETCHED ARM COVER7180\SPCC100403582225A0伸臂出線連結座OUTSTRETCHED ARM CONNECTING 7210\SPCC100503582226A0伸臂連結蓋板OUTSTRETCHED ARM CONNECTING 7180\SPCC100603582227A0伸臂側蓋板OUTSTRETCHED ARM COVER 7180\SPCC100703500129A0旋轉座ROTATION BRACKET 3240\S45C100803580264B0操作箱OPERATION CABINET 7460\SPCC100903560523B0操作箱後蓋CABINET REAR COVER 7460\SPCC1010********C0洩放電阻座(大)BLEEDER RESISTANCE BRACKET 7210\SPCC101103581310E0洩放電阻座蓋COVER,BLEEDER RESISTANCE BRA 7210\SPCC101204300400400管型把手(自然色)HAHDLE U1-400L101304720632243警示燈(三層)WARNING LIGHTGSL-24V-3-B1<結 束>台灣力得衛宇龍科技股份有限公司*單階材料用量清單製表日期: 101-03-30第1頁主件品號序號元件品號品 名英文品名規 格用量2F53055操作箱單元 Fanuc-0iMDOPERATION CABINET UNITV42iW00103582222A0伸臂OUTSTRETCHED ARM7470\SPCC100203582223A0伸臂上蓋板(A)OUTSTRETCHED ARM COVER7180\SPCC100303582224A0伸臂上蓋板(B)OUTSTRETCHED ARM COVER7180\SPCC100403582225A0伸臂出線連結座OUTSTRETCHED ARM CONNECTING 7210\SPCC100503582226A0伸臂連結蓋板OUTSTRETCHED ARM CONNECTING 7180\SPCC100603582227A0伸臂側蓋板OUTSTRETCHED ARM COVER 7180\SPCC100703500129A0旋轉座ROTATION BRACKET 3240\S45C100803500432E0操作箱(FANUC Oi MC)OPERATION CABINET 7460\SPCC100903500433C0操作箱後蓋CABINET REAR COVER 7460\SPCC101004300400400管型把手(自然色)HAHDLE U1-400L101104720632243警示燈(三層)WARNING LIGHTGSL-24V-3-B1<結 束>。