山东建筑大学本科毕业设计说明书外文文献及翻译格式模版1.doc

教函[2007]33号关于印发《山东建筑大学本科毕业设计说明书（论文）撰写规范》的通知各院（部）、校直有关部门：毕业设计(论文)的撰写水平反映了毕业设计（论文）的质量。

为了提高本科毕业设计（论文）质量，按照《山东建筑大学本科毕业设计（论文）管理规定》的要求，制定了《山东建筑大学本科毕业设计说明书（论文）撰写规范》，现印发给你们，请遵照执行。

附件：1.山东建筑大学本科毕业设计说明书（论文）撰写规范2.山东建筑大学本科毕业设计说明书（论文）撰写格式模版3.山东建筑大学本科毕业设计（论文）外文文献及译文格式模版二○○七年六月一日报：校领导送：各院（部）、校直有关部门、教务处处长及有关科（室）校对：肖鹏共印30份附件1：山东建筑大学本科毕业设计说明书（论文）撰写规范毕业设计(论文)是实践教学中的重要环节，是学习深化与升华的重要过程。

它既是学生学习、研究与实践成果的全面总结，又是对学生素质与能力的一次全面检验，而且还是对学生的毕业资格及学位资格认证的重要依据。

为了保证本科毕业设计（论文）质量，按照《山东建筑大学本科毕业设计（论文）管理规定》的要求，特制定本规范。

一、毕业设计(论文)资料的归档1．毕业设计（论文）资料主要包括毕业设计说明书（论文）、毕业设计（论文）任务书、开题报告表、工作进程表、指导教师评审表、评阅人评审表、答辩小组意见表、成绩评分表、答辩提问录、图纸、外文文献及译文、毕业设计（论文）申请表、选题变更表、实地考察报告、计算资料、实验报告、文献综述、实物性的设计成果等。

2．毕业设计（论文）专用袋中的材料按顺序将下列材料装入毕业设计（论文）专用袋：毕业设计说明书（论文）、毕业设计（论文）任务书、开题报告表、工作进程表、指导教师评审表、评阅人评审表、答辩小组意见表、成绩评分表、答辩提问录、图纸（按国家标准折叠装订）、软件光盘、外文文献及译文等。

其中毕业设计说明书（论文）按封面、目录、中外文摘要及关键词、前言、正文部分、结论、谢辞、参考文献、附录的顺序撰写、排版并装订成册。

外文翻译与文献综述模板格式以及要求说明
外文中文翻译格式：
标题：将外文标题翻译成中文，可以在括号内标明外文标题
摘要：将外文摘要翻译成中文，包括问题陈述、研究目的、方法、结果和结论等内容。

关键词：将外文关键词翻译成中文。

引言：对外文论文引言进行翻译，概述问题的背景、重要性和研究现状。

方法：对外文论文方法部分进行翻译，包括研究设计、数据采集和分析方法等。

结果：对外文论文结果部分进行翻译，介绍研究结果和统计分析等内容。

讨论：对外文论文讨论部分进行翻译，对研究结果进行解释和评价。

结论：对外文论文结论部分进行翻译，总结研究的主要发现和意义。

附录：如果外文论文有附录部分，需要进行翻译并按照指定的格式进行排列。

文献综述模板格式：
标题：文献综述标题
引言：对文献综述的背景、目的和方法进行说明。

综述内容：按照时间、主题或方法等进行分类，对相关文献进行综述，可以分段进行描述。

讨论：对综述内容进行解释和评价，概括主要研究成果和趋势。

结论：总结文献综述，概括主要发现和意义。

要求说明：
1.外文中文翻译要准确无误，语句通顺流畅，做到质量高、符合学术
规范。

2.文献综述要选择与所研究领域相关的文献进行综述，覆盖面要广，
内容要全面、准确并有独立思考。

4.文献综述要注重整体结构和逻辑连贯性，内容要有层次感，段落间
要过渡自然。

5.外文中文翻译和文献综述要进行查重，确保原文与译文的一致性，
并避免抄袭和剽窃行为。

成都东软学院外文资料和译文格式要求一、译文必须采用计算机输入、打印，幅面A4。

外文资料原文（复印或打印）在前，译文在后，于左侧装订。

二、具体要求1、至少翻译一篇内容与所选课题相关的外文文献。

2、译文汉字字数不少于4000字。

3、正文格式要求：宋体五号字。

译文格式参见《译文格式要求》，宋体五号字，单倍行距。

纸张纸张为A4纸，页边距上2.54cm、下2.54cm、左3.17cm、右3.17cm。

装订外文资料原文（复印或打印）在前，译文在后封面封面的专业、班级、姓名、学号等信息要全部填写正确。

封面指导教师必须为讲师以上职称，若助教则需要配备一名讲师协助指导。

讲师在前，助教在后。

指导教师姓名后面空一个中文空格，加职称。

页眉页眉说明宋体小五，左端“XX学院毕业设计（论文）”，右端“译文”。

页眉中的学院名称要与封面学院名称一致。

字数本科4000字。

附：外文资料和译文封面、空白页成都东软学院外文资料和译文专业：软件工程移动互联网应用开发班级：2班姓名：罗荣昆学号：12310420216指导教师：2015年 12月 8日Android page layoutUsing XML-Based LayoutsW hile it is technically possible to create and attach widgets to our activity purely through Java code, the way we did in Chapter 4, the more common approach is to use an XML-based layout file. Dynamic instantiation of widgets is reserved for more complicated scenarios, where the widgets are not known at compile-time (e g., populating a column of radio buttons based on data retrieved off the Internet).With that in mind, it’s time to break out the XML and learn how to lay out Android activities that way.What Is an XML-Based Layout?As the name suggests, an XML-based layout is a specification of widgets’ relationships to each other—and to their containers (more on this in Chapter 7)—encoded in XML format. Specifi cally, Android considers XML-based layouts to be resources, and as such layout files are stored in the res/layout directory inside your Android project.Each XML file contains a tree of elements specifying a layout of widgets and their containers that make up one view hierarchy. The attributes of the XML elements are properties, describing how a widget should look or how a container should behave. For example, if a Button element has an attribute value of android:textStyle = "bold", that means that the text appearing on the face of the button should be rendered in a boldface font style.Android’s SDK ships with a tool (aapt) which uses the layouts. This tool should be automatically invoked by your Android tool chain (e.g., Eclipse, Ant’s build.xml). Of particular importance to you as a developer is that aapt generates the R.java source file within your project, allowing you to access layouts and widgets within those layouts directly from your Java code. Why Use XML-Based Layouts?Most everything you do using XML layout files can be achieved through Java code. For example, you could use setTypeface() to have a button render its textin bold, instead of using a property in an XML layout. Since XML layouts are yet another file for you to keep track of, we need good reasons for using such files.Perhaps the biggest reason is to assist in the creation of tools for view definition, such as a GUI builder in an IDE like Eclipse or a dedicated Android GUI designer like DroidDraw1. Such GUI builders could, in principle, generate Java code instead of XML. The challenge is re-reading the UI definition to support edits—that is far simpler if the data is in a structured format like XML than in a programming language. Moreover, keeping generated XML definitions separated from hand-written Java code makes it less likely that somebody’s custom-crafted source will get clobbered by accident when the generated bits get re-generated. XML forms a nice middle ground between something that is easy for tool-writers to use and easy for programmers to work with by hand as needed.Also, XML as a GUI definition format is becoming more commonplace. Microsoft’s XAML2, Adobe’s Flex3, and Mozilla’s XUL4 all take a similar approach to that of Android: put layout details in an XML file and put programming smarts in source files (e.g., JavaScript for XUL). Many less-well-known GUI frameworks, such as ZK5, also use XML for view definition. While “following the herd” is not necessarily the best policy, it does have the advantage of helping to ease the transition into Android from any other XML-centered view description language. OK, So What Does It Look Like?Here is the Button from the previous chapter’s sample application, converted into an XMLlayout file, found in the Layouts/NowRedux sample project. This code sample along with all others in this chapter can be found in the Source Code area of .<?xml version="1.0" encoding="utf-8"?><Button xmlns:android="/apk/res/android"android:id="@+id/button"android:text=""android:layout_width="fill_parent"android:layout_height="fill_parent"/>The class name of the widget—Button—forms the name of the XML element. Since Button is an Android-supplied widget, we can just use the bare class name. If you create your own widgets as subclasses of android.view.View, you would need to provide a full package declara tion as well.The root element needs to declare the Android XML namespace:xmlns:android="/apk/res/android"All other elements will be children of the root and will inherit that namespace declaration.Because we want to reference this button from our Java code, we need to give it an identifier via the android:id attribute. We will cover this concept in greater detail later in this chapter.The remaining attributes are properties of this Button instance:• android:text indicates the initial text to be displayed on the button face (in this case, an empty string)• android:layout_width and android:layout_height tell Android to have the button’swidth and height fill the “parent”, in this case the entire screen—these attributes will be covered in greater detail in Chapter 7.Since this single widget is the only content in our activity, we only need this single element. Complex UIs will require a whole tree of elements, representing the widgets and containers that control their positioning. All the remaining chapters of this book will use the XML layout form whenever practical, so there are dozens of other examples of more complex layouts for you to peruse from Chapter 7 onward.What’s with the @ Signs?Many widgets and containers only need to appear in the XML layout file and do not need to be referenced in your Java code. For example, a static label (TextView) frequently only needs to be in the layout file to indicate where it should appear. These sorts of elements in the XML file do not need to have the android:id attribute to give them a name.Anything you do want to use in your Java source, though, needs an android:id.The convention is to use @+id/... as the id value, where the ... represents your locally unique name for the widget in question. In the XML layout example in the preceding section, @+id/button is the identifier for the Button widget.Android provides a few special android:id values, of the form @android:id/.... We will see some of these in various chapters of this book, such as Chapters 8 and 10.We Attach These to the Java How?Given that you have painstakingly set up the widgets and containers in an XML layout filenamed main.xml stored in res/layout, all you need is one statement in your activity’s onCreate() callback to use that layout:setContentView(yout.main);This is the same setContentView() we used earlier, passing it an instance of a View subclass (in that case, a Button). The Android-built view, constructed from our layout, is accessed from that code-generated R class. All of the layouts are accessible under yout, keyed by the base name of the layout file—main.xml results in yout.main.To access our identified widgets, use findViewById(), passing in the numeric identifier of the widget in question. That numeric identifier was generated by Android in the R class asR.id.something (where something is the specific widget you are seeking). Those widgets are simply subclasses of View, just like the Button instance we created in Chapter 4.The Rest of the StoryIn the original Now demo, the button’s face would show the current time, which would reflect when the button was last pushed (or when the activity was first shown, if the button had not yet been pushed).Most of that logic still works, even in this revised demo (NowRedux). However,rather than instantiating the Button in our activity’s onCreate() callback, we can reference the one from the XML layout:package youts;import android.app.Activity;import android.os.Bundle;import android.view.View;import android.widget.Button; import java.util.Date;public class NowRedux extends Activity implements View.OnClickListener { Button btn;@Overridepublic void onCreate(Bundle icicle) { super.onCreate(icicle);setContentView(yout.main);btn=(Button)findViewById(R.id.button);btn.setOnClickListener(this);upd ateTime();}public void onClick(View view) { updateTime();}private void updateTime() {btn.setText(new Date().toString()); }}The first difference is that rather than setting the content view to be a view we created in Java code, we set it to reference the XML layout (setContentView(yout.main)). The R.java source file will be updated when we rebuild this project to include a reference to our layout file (stored as main.xml in our project’s res/l ayout directory).The other difference is that we need to get our hands on our Button instance, for which we use the findViewById() call. Since we identified our button as @+id/button, we can reference the button’s identifier as R.id.button. Now, with the Button instance in hand, we can set the callback and set the label as needed.As you can see in Figure 5-1, the results look the same as with the originalNow demo.Figure 5-1. The NowRedux sample activity Employing Basic WidgetsE very GUI toolkit has some basic widgets: fields, labels, buttons, etc. Android’s toolkit is no different in scope, and the basic widgets will provide a good introduction as to how widgets work in Android activities.Assigning LabelsThe simplest widget is the label, referred to in Android as a TextView. Like in most GUI toolkits, labels are bits of text not editable directly by users. Typically, they are used to identify adjacent widgets (e.g., a “Name:” label before a field where one fills in a name).In Java, you can create a label by creating a TextView instance. More commonly, though, you will create labels in XML layout files by adding a TextView element to the layout, with an android:text property to set the value of the label itself. If you need to swap labels based on certain criteria, such as internationalization, you may wish to use a resource reference in the XML instead, as will be described in Chapter 9. TextView has numerous other properties of relevance for labels, such as:• android:typeface to set the typeface to use for the label (e.g., monospace) • android:textStyle to indicate that the typeface should be made bold (bold), italic (italic),or bold and italic (bold_italic)• android:textColor to set the color of the label’s text, in RGB hex format (e.g., #FF0000 for red)For example, in the Basic/Label project, you will find the following layout file:<?xml version="1.0" encoding="utf-8"?><TextView xmlns:android=/apk/res/androidandroid:layout_width="fill_parent"android:layout_height="wrap_content"android:text="You were expecting something profound?" />As you can see in Figure 6-1, just that layout alone, with the stub Java source provided by Android’s p roject builder (e.g., activityCreator), gives you the application.Figure 6-1. The LabelDemo sample applicationButton, Button, Who’s Got the Button?We’ve already seen the use of the Button widget in Chapters 4 and 5. As it turns out, Button is a subclass of TextView, so everything discussed in the preceding section in terms of formatting the face of the button still holds. Fleeting ImagesAndroid has two widgets to help you embed images in your activities: ImageView and ImageButton. As the names suggest, they are image-based analogues to TextView and Button, respectively.Each widget takes an android:src attribute (in an XML layout) to specify what picture to use. These usually reference a drawable resource, described in greater detail in the chapter on resources. You can also set the image content based on a Uri from a content provider via setImageURI().ImageButton, a subclass of ImageView, mixes in the standard Button behaviors, for responding to clicks and whatnot.For example, take a peek at the main.xml layout from the Basic/ImageView sample project which is found along with all other code samples at : <?xml version="1.0" encoding="utf-8"?><ImageView xmlns:android=/apk/res/androidandroid:id="@+id/icon"android:layout_width="fill_parent"android:layout_height="fill_parent"android:adjustViewBounds="true"android:src="@drawable/molecule" />The result, just using the code-generated activity, is shown in Figure 6-2.Figure 6-2. The ImageViewDemo sample applicationFields of Green. Or Other Colors.Along with buttons and labels, fields are the third “anchor” of most GUI toolkits. In Android, they are implemented via the EditText widget, which is a subclass of the TextView used for labels.Along with the standard TextView properties (e.g., android:textStyle), EditText has many others that will be useful for you in constructing fields, including:• android:autoText, to control if the fie ld should provide automatic spelling assistance• android:capitalize, to control if the field should automatically capitalize the first letter of entered text (e.g., first name, city) • android:digits, to configure the field to accept only certain digi ts • android:singleLine, to control if the field is for single-line input or multiple-line input (e.g., does <Enter> move you to the next widget or add a newline?)Beyond those, you can configure fields to use specialized input methods, such asandroid:numeric for numeric-only input, android:password for shrouded password input,and android:phoneNumber for entering in phone numbers. If you want to create your own input method scheme (e.g., postal codes, Social Security numbers), you need to create your own implementation of the InputMethod interface, then configure the field to use it via android: inputMethod.For example, from the Basic/Field project, here is an XML layout file showing an EditText:<?xml version="1.0" encoding="utf-8"?><EditTextxmlns:android=/apk/res/androidandroid:id="@+id/field"android:layout_width="fill_parent"android:layout_height="fill_parent"android:singleLine="false" />Note that android:singleLine is false, so users will be able to enter in several lines of text. For this project, the FieldDemo.java file populates the input field with some prose:package monsware.android.basic;import android.app.Activity;import android.os.Bundle;import android.widget.EditText;public class FieldDemo extends Activity { @Overridepublic void onCreate(Bundle icicle) { super.onCreate(icicle);setContentView(yout.main);EditText fld=(EditText)findViewById(R.id.field);fld.setText("Licensed under the Apache License, Version 2.0 " + "(the \"License\"); you may not use this file " + "except in compliance with the License. You may " + "obtain a copy of the License at " +"/licenses/LICENSE-2.0");}}The result, once built and installed into the emulator, is shown in Figure 6-3.Figure 6-3. The FieldDemo sample applicationNote Android’s emulator only allows one application in the launcher per unique Java package. Since all the demos in this chapter share the monsware.android.basic package, you will only see one of these demos in your emulator’s launcher at any one time.Another flavor of field is one that offers auto-completion, to help users supply a value without typing in the whole text. That is provided in Android as the AutoCompleteTextView widget and is discussed in Chapter 8.Just Another Box to CheckThe classic checkbox has two states: checked and unchecked. Clicking the checkbox toggles between those states to indicate a choice (e.g., “Ad d rush delivery to my order”). In Android, there is a CheckBox widget to meet this need. It has TextView as an ancestor, so you can use TextView properties likeandroid:textColor to format the widget. Within Java, you can invoke: • isChecked() to determi ne if the checkbox has been checked• setChecked() to force the checkbox into a checked or unchecked state • toggle() to toggle the checkbox as if the user checked itAlso, you can register a listener object (in this case, an instance of OnCheckedChangeListener) to be notified when the state of the checkbox changes.For example, from the Basic/CheckBox project, here is a simple checkbox layout:<?xml version="1.0" encoding="utf-8"?><CheckBox xmlns:android="/apk/res/android"android:id="@+id/check"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="This checkbox is: unchecked" />The corresponding CheckBoxDemo.java retrieves and configures the behavior of the checkbox:public class CheckBoxDemo extends Activityimplements CompoundButton.OnCheckedChangeListener { CheckBox cb;@Overridepublic void onCreate(Bundle icicle) { super.onCreate(icicle);setContentView(yout.main);cb=(CheckBox)findViewById(R.id.check);cb.setOnCheckedChangeListener(this);}public void onCheckedChanged(CompoundButton buttonView,boolean isChecked) {if (isChecked) {cb.setText("This checkbox is: checked");}else {cb.setText("This checkbox is: unchecked");}}}Note that the activity serves as its own listener for checkbox state changes since it imple ments the OnCheckedChangeListener interface (via cb.setOnCheckedChangeListener(this)). The callback for the listener is onCheckedChanged(), which receives the checkbox whose state has changed and what the new state is. In this case, we update the text of the checkbox to reflect what the actual box contains.The result? Clicking the checkbox immediately updates its text, as you can see in Figures 6-4 and 6-5.Figure 6-4. The CheckBoxDemo sample application, with the checkbox uncheckedFigure 6-5. The same application, now with the checkbox checkedTurn the Radio UpAs with other implementations of radio buttons in other toolkits, Android’s radio buttons are two-state, like checkboxes, but can be grouped such that only one radio button in the group can be checked at any time.Like CheckBox, RadioButton inherits from CompoundButton, which in turn inherits fromTextView. Hence, all the standard TextView properties for font face, style, color, etc., are available for controlling the look of radio buttons. Similarly, you can call isChecked() on a RadioButton to see if it is selected, toggle() to select it, and so on, like you can with a CheckBox.Most times, you will want to put your RadioButton widgets inside of aRadioGroup. The RadioGroup indicates a set of radio buttons whose state is tied, meaning only one button out of the group can be selected at any time. If you assign an android:id to your RadioGroup in your XML layout, you can access the group from your Java code and invoke:• check() to check a specific radio button via its ID (e.g., group.check(R.id.radio1))• clearCheck() to clear all radio buttons, so none in the group are checked• getCheckedRadioButtonId() to get the ID of the currently-checked radio button (or -1 if none are checked)For example, from the Basic/RadioButton sample application, here is an XML layout showing a RadioGroup wrapping a set of RadioButton widgets: <?xml version="1.0" encoding="utf-8"?> <RadioGroupxmlns:android=/apk/res/androidandroid:orientation="vertical"android:layout_width="fill_parent"android:layout_height="fill_parent" ><RadioButton android:id="@+id/radio1"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="Rock" /><RadioButton android:id="@+id/radio2"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="Scissors" /><RadioButton android:id="@+id/radio3"android:layout_width="wrap_content"android:layout_height="wrap_content"android:text="Paper" /></RadioGroup>Figure 6-6 shows the result using the stock Android-generated Java forthe project and this layout.Figure 6-6. The RadioButtonDemo sample application Note that the radio button group is initially set to be completely unchecked at the outset. To pre-set one of the radio buttons to be checked, use either setChecked() on the RadioButton or check() on the RadioGroup from within your onCreate() callback in your activity.It’s Quite a ViewAll widgets, including the ones previously shown, extend View, and as such give all widgets an array of useful properties and methods beyond those already described.Useful PropertiesSome of the properties on View most likely to be used include:• Controls the focus sequence:• android:nextFocusDown• android:nextFocusLeft• android:nextFocusRight• android:nextFocusUp• android:visibility, which controls wheth er the widget is initially visible• android:background, which typically provides an RGB color value (e.g., #00FF00 for green) to serve as the background for the widgetUseful MethodsYou can toggle whether or not a widget is enabled via setEnabled() and see if it is enabled via isEnabled(). One common use pattern for this is to disable some widgets based on a CheckBox or RadioButton selection.You can give a widget focus via requestFocus() and see if it is focused via isFocused(). You might use this in concert with disabling widgets as previously mentioned, to ensure the proper widget has the focus once your disabling operation is complete.To help navigate the tree of widgets and containers that make up an activity’s overall view, you can use:• get Parent() to find the parent widget or container• findViewById() to find a child widget with a certain ID• getRootView() to get the root of the tree (e.g., what you provided to the activity via setContentView())Android 页面布局使用XML进行布局虽然纯粹通过Java代码在activity上创建和添加部件，在技术上是可行的，我们在第4章中做的一样，更常见的方法是使用一种基于XML的布局文件。

盐城师范学院毕业论文（设计）外文资料翻译学院：（四号楷体_GB2312下同）专业班级:学生姓名:学号:指导教师：外文出处：(外文）(Times New Roman四号) 附件: 1.外文资料翻译译文； 2.外文原文1．外文资料翻译译文译文文章标题×××××××××正文×××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××………….＊注：（本注释不是外文翻译的部分，只是本式样的说明解释）1. 译文文章标题为三号黑体居中，缩放、间距、位置标准，无首行缩进，无左右缩进,且前空（四号)两行，段前、段后各0.5行间距,行间距为1。

25倍多倍行距;2. 正文中标题为小四号，中文用黑体,英文用Times New Roman体,缩放、间距、位置标准,无左右缩进，无首行缩进，无悬挂式缩进，段前、段后0。

5行间距,行间距为1.25倍多倍行距；3。

正文在文章标题下空一行，为小四号，中文用宋体，英文用Times New Roman体,缩放、间距、位置标准，无左右缩进,首行缩进2字符（两个汉字)，无悬挂式缩进,段前、段后间距无，行间距为1。

毕设外文文献+翻译1外文翻译外文原文CHANGING ROLES OF THE CLIENTS、ARCHITECTSAND CONTRACTORS THROUGH BIMAbstract:Purpose –This paper aims to present a general review of the practical implications of building information modelling (BIM) based on literature and case studies. It seeks to address the necessity for applying BIM and re-organising the processes and roles in hospital building projects. This type of project is complex due to complicated functional and technical requirements, decision making involving a large number of stakeholders, and long-term development processes.Design/methodology/approach–Through desk research and referring to the ongoing European research project InPro, the framework for integrated collaboration and the use of BIM are analysed.Findings –One of the main findings is the identification of the main factors for a successful collaboration using BIM, which can be recognised as “POWER”: product information sharing (P),organisational roles synergy (O), work processes coordination (W), environment for teamwork (E), and reference data consolidation (R).Originality/value –This paper contributes to the actual discussion in science and practice on the changing roles and processes that are required to develop and operate sustainable buildings with the support of integrated ICT frameworks and tools. It presents the state-of-the-art of European research projects and some of the first real cases of BIM application inhospital building projects.Keywords:Europe, Hospitals, The Netherlands, Construction works, Response flexibility, Project planningPaper type :General review1. IntroductionHospital building projects, are of key importance, and involve significant investment, and usually take a long-term development period. Hospital building projects are also very complex due to the complicated requirements regarding hygiene, safety, special equipments, and handling of a large amount of data. The building process is very dynamic and comprises iterative phases and intermediate changes. Many actors with shifting agendas, roles and responsibilities are actively involved, such as: the healthcare institutions, national and local governments, project developers, financial institutions, architects, contractors, advisors, facility managers, and equipment manufacturers and suppliers. Such building projects are very much influenced, by the healthcare policy, which changes rapidly in response to the medical, societal and technological developments, and varies greatly between countries (World Health Organization, 2000). In The Netherlands, for example, the way a building project in the healthcare sector is organised is undergoing a major reform due to a fundamental change in the Dutch health policy that was introduced in 2008.The rapidly changing context posts a need for a building with flexibility over its lifecycle. In order to incorporate life-cycle considerations in the building design, construction technique, and facility management strategy, a multidisciplinary collaboration is required. Despite the attempt for establishing integrated collaboration, healthcare building projects still facesserious problems in practice, such as: budget overrun, delay, and sub-optimal quality in terms of flexibility, end-user?s dissatisfaction, and energy inefficiency. It is evident that the lack of communication and coordination between the actors involved in the different phases of a building project is among the most important reasons behind these problems. The communication between different stakeholders becomes critical, as each stakeholder possesses different setof skills. As a result, the processes for extraction, interpretation, and communication of complex design information from drawings and documents are often time-consuming and difficult. Advanced visualisation technologies, like 4D planning have tremendous potential to increase the communication efficiency and interpretation ability of the project team members. However, their use as an effective communication tool is still limited and not fully explored. There are also other barriers in the information transfer and integration, for instance: many existing ICT systems do not support the openness of the data and structure that is prerequisite for an effective collaboration between different building actors or disciplines.Building information modelling (BIM) offers an integrated solution to the previously mentioned problems. Therefore, BIM is increasingly used as an ICT support in complex building projects. An effective multidisciplinary collaboration supported by an optimal use of BIM require changing roles of the clients, architects, and contractors; new contractual relationships; and re-organised collaborative processes. Unfortunately, there are still gaps in the practical knowledge on how to manage the building actors to collaborate effectively in their changing roles, and todevelop and utilise BIM as an optimal ICT support of the collaboration.This paper presents a general review of the practical implications of building information modelling (BIM) based on literature review and case studies. In the next sections, based on literature and recent findings from European research project InPro, the framework for integrated collaboration and the use of BIM are analysed. Subsequently, through the observation of two ongoing pilot projects in The Netherlands, the changing roles of clients, architects, and contractors through BIM application are investigated. In conclusion, the critical success factors as well as the main barriers of a successful integrated collaboration using BIM are identified.2. Changing roles through integrated collaboration and life-cycle design approachesA hospital building project involves various actors, roles, and knowledge domains. In The Netherlands, the changing roles of clients, architects, and contractors in hospital building projects are inevitable due the new healthcare policy. Previously under the Healthcare Institutions Act (WTZi), healthcare institutions were required to obtain both a license and a building permit for new construction projects and major renovations. The permit was issued by the Dutch Ministry of Health. The healthcare institutions were then eligible to receive financial support from the government. Since 2008, new legislation on the management of hospital building projects and real estate has come into force. In this new legislation, a permit for hospital building project under the WTZi is no longer obligatory, nor obtainable (Dutch Ministry of Health, Welfare and Sport, 2008). This change allows more freedom from the state-directed policy, and respectively,allocates more responsibilities to the healthcare organisations to deal with the financing and management of their real estate. The new policy implies that the healthcare institutions are fully responsible to man age and finance their building projects and real estate. The government?s support for the costs of healthcare facilities will no longer be given separately, but will be included in the fee for healthcare services. This means that healthcare institutions must earn back their investment on real estate through their services. This new policy intends to stimulate sustainable innovations in the design, procurement and management of healthcare buildings, which will contribute to effective and efficient primary healthcare services.The new strategy for building projects and real estate management endorses an integrated collaboration approach. In order to assure the sustainability during construction, use, and maintenance, the end-users, facility managers, contractors and specialist contractors need to be involved in the planning and design processes. The implications of the new strategy are reflected in the changing roles of the building actors and in the new procurement method.In the traditional procurement method, the design, and its details, are developed by the architect, and design engineers. Then, the client (the healthcare institution) sends an application to the Ministry of Healthto obtain an approval on the building permit and the financial support from the government. Following this, a contractor is selected through a tender process that emphasises the search for the lowest-price bidder. During the construction period, changes often take place due to constructability problems of the design and new requirements from the client.Because of the high level of technical complexity, and moreover, decision-making complexities, the whole process from initiation until delivery of a hospital building project can take up to ten years time. After the delivery, the healthcare institution is fully in charge of the operation of the facilities. Redesigns and changes also take place in the use phase to cope with new functions and developments in the medical world.The integrated procurement pictures a new contractual relationship between the parties involved in a building project. Instead of a relationship between the client and architect for design, and the client and contractor for construction, in an integrated procurement the client only holds a contractual relationship with the main party that is responsible for both design and construction. The traditional borders between tasks and occupational groups become blurred since architects, consulting firms, contractors, subcontractors, and suppliers all stand on the supply side in the building process while the client on the demand side. Such configuration puts the architect, engineer and contractor in a very different position that influences not only their roles, but also their responsibilities, tasks and communication with the client, the users, the team and other stakeholders.The transition from traditional to integrated procurement method requires a shift of mindset of the parties on both the demand and supply sides. It is essential for the client and contractor to have a fair and open collaboration in which both can optimally use their competencies. The effectiveness of integrated collaboration is also determined by the client?s capacity and strategy to organize innovative tendering procedures.A new challenge emerges in case of positioning an architect in a partnership with the contractor instead of with the client. In case of the architect enters a partnership with the contractor, an important issues is how to ensure the realisation of the architectural values as well as innovative engineering through an efficient construction process. In another case, the architect can stand at the client?s side in a strategic advisory role instead of being the designer. In this case, the architect?s responsibility is translating client?s requirements and wishes into the architectural values to be included in the design specification, and evaluating the contractor?s proposal against this. In any of this new role, the architect holds the responsibilities as stakeholder interest facilitator, custodian of customer value and custodian of design models.The transition from traditional to integrated procurement method also brings consequences in the payment schemes. In the traditional building process, the honorarium for the architect is usually based on a percentage of the project costs; this may simply mean that the more expensive the building is, the higher the honorarium will be. The engineer receives the honorarium based on the complexity of the design and the intensity of the assignment. A highly complex building, which takes a number of redesigns, is usually favourable for the engineers in terms of honorarium. A traditional contractor usually receives the commission based on the tender to construct the building at the lowest price by meeting the minimum specifications given by the client. Extra work due to modifications is charged separately to the client. After the delivery, the contractor is no longer responsible for the long-term use of the building. In the traditional procurement method, all risks are placed with theclient.In integrated procurement method, the payment is based on the achieved building performance; thus, the payment is non-adversarial. Since the architect, engineer and contractor have a wider responsibility on the quality of the design and the building, the payment is linked to a measurement system of the functional and technical performance of the building over a certain period of time. The honorarium becomes an incentive to achieve the optimal quality. If the building actors succeed to deliver a higher added-value thatexceed the minimum client?s requirements, they will receive a bonus in accordance to the client?s extra gain. The level of transparency is also improved. Open book accounting is an excellent instrument provided that the stakeholders agree on the information to be shared and to its level of detail (InPro, 2009).Next to the adoption of integrated procurement method, the new real estate strategy for hospital building projects addresses an innovative product development and life-cycle design approaches. A sustainable business case for the investment and exploitation of hospital buildings relies on dynamic life-cycle management that includes considerations and analysis of the market development over time next to the building life-cycle costs (investment/initial cost, operational cost, and logistic cost). Compared to the conventional life-cycle costing method, the dynamic life-cycle management encompasses a shift from focusing only on minimizing the costs to focusing on maximizing the total benefit that can be gained. One of the determining factors for a successful implementation of dynamic life-cycle management is the sustainable design of the building and building components, which means that the design carriessufficient flexibility to accommodate possible changes in the long term (Prins, 1992).Designing based on the principles of life-cycle management affects the role of the architect, as he needs to be well informed about the usage scenarios and related financial arrangements, the changing social and physical environments, and new technologies. Design needs to integrate people activities and business strategies over time. In this context, the architect is required to align the design strategies with the organisational, local and global policies on finance, business operations, health and safety, environment, etc.The combination of process and product innovation, and the changing roles of the building actors can be accommodated by integrated project delivery or IPD (AIA California Council, 2007). IPD is an approach that integrates people, systems, business structures and practices into a process that collaboratively harnesses the talents and insights of all participants to reduce waste and optimize efficiency through all phases of design, fabrication and construction. IPD principles can be applied to a variety of contractual arrangements. IPD teams will usually include members well beyond the basic triad of client, architect, and contractor. At a minimum, though, an Integrated Project should include a tight collaboration between the client, the architect, and the main contractor ultimately responsible for construction of the project, from the early design until the project handover. The key to a successful IPD is assembling a team that is committed to collaborative processes and is capable of working together effectively. IPD is built on collaboration. As a result, it can only be successful if the participants share and apply common values and goals.3. Changing roles through BIM applicationBuilding information model (BIM) comprises ICT frameworks and tools that can support the integrated collaboration based on life-cycle design approach. BIM is a digital representation of physical and functional characteristics of a facility. As such it serves as a shared knowledge resource for information about a facility forming a reliable basis for decisions during its lifecycle from inception onward (National Institute of Building Sciences NIBS, 2007). BIM facilitates time and place independent collaborative working. A basic premise of BIM is collaboration by different stakeholders at different phases of the life cycle of a facility to insert, extract, update or modify information in the BIM to support and reflect the roles of that stakeholder. BIM in its ultimate form, as a shared digital representation founded on open standards for interoperability, can become a virtual information model to be handed from the design team to the contractor and subcontractors and then to the client.BIM is not the same as the earlier known computer aided design (CAD). BIM goes further than an application to generate digital (2D or 3D) drawings. BIM is an integrated model in which all process and product information is combined, stored, elaborated, and interactively distributed to all relevant building actors. As a central model for all involved actors throughout the project lifecycle, BIM develops andevolves as the project progresses. Using BIM, the proposed design and engineering solutions can be measured against the client?s requirements and expected building performance. The functionalities of BIM to support the design process extend to multidimensional (nD), including: three-dimensional visualisation and detailing, clash detection, material schedule, planning, costestimate, production and logistic information, and as-built documents. During the construction process, BIM can support the communication between the building site, the factory and the design office– which is crucial for an effective and efficient prefabrication and assembly processes as well as to prevent or solve problems related to unforeseen errors or modifications. When the building is in use, BIM can be used in combination with the intelligent building systems to provide and maintain up-to-date information of the building performance, including the life-cycle cost.To unleash the full potential of more efficient information exchange in the AEC/FM industry in collaborative working using BIM, both high quality open international standards and high quality implementations of these standards must be in place. The IFC open standard is generally agreed to be of high quality and is widely implemented in software. Unfortunately, the certification process allows poor quality implementations to be certified and essentially renders the certified software useless for any practical usage with IFC. IFC compliant BIM is actually used less than manual drafting for architects and contractors, and show about the same usage for engineers. A recent survey shows that CAD (as a closed-system) is still the major form of technique used in design work (over 60 per cent) while BIM is used in around 20 percent of projects for architects and in around 10 per cent of projects for engineers and contractors.The application of BIM to support an optimal cross-disciplinary and cross-phase collaboration opens a new dimension in the roles and relationships between the building actors. Several most relevant issues are: the new role of a model manager; the agreement on the access right and IntellectualProperty Right (IPR); the liability and payment arrangement according to the type of contract and in relation to the integrated procurement; and the use of open international standards.Collaborative working using BIM demands a new expert role of a model manager who possesses ICT as well as construction process know-how (InPro, 2009). The model manager deals with the system as well as with the actors. He provides and maintains technological solutions required for BIM functionalities, manages the information flow, and improves the ICT skills of the stakeholders. The model manager does not take decisions on design and engineering solutions, nor the organisational processes, but his roles in the chain of decision making are focused on:the development of BIM, the definition of the structure and detail level of the model, and the deployment of relevant BIM tools, such as for models checking, merging, and clash detections;the contribution to collaboration methods, especially decision making and communication protocols, task planning, and risk management;and the management of information, in terms of data flow and storage, identification of communication errors, and decision or process (re-)tracking.Regarding the legal and organisational issues, one of the actual questions is: “In what way does the intellectual property right (IPR) in collaborative working using BIM differ from the IPR in a traditional teamwork?”. In terms of combine d work, the IPR of each element is at tached to its creator. Although it seems to be a fully integrated design, BIM actually resulted from a combination of works/elements; for instance: the outline of the building design, is created by the architect, the design for theelectrical system, is created by the electrical contractor, etc. Thus, in case of BIM as a combined work, the IPR is similar to traditional teamwork. Working with BIM with authorship registration functionalities may actually make it easier to keep track of the IPR.How does collaborative working, using BIM, effect the contractual relationship? On the one hand,collaborative working using BIM does not necessarily change the liability position in the contract nor does it obligate an alliance contract. The General Principles of BIM A ddendum confirms: …This does not effectuate or require a restructuring of contractual relationships or shifting of risks between or among the Project Participants other than as specifically required per the Protocol Addendum and its Attachments? (ConsensusDOCS, 2008). On the other hand, changes in terms of payment schemes can be anticipated. Collaborative processes using BIM will lead to the shifting of activities from to the early design phase. Much, if not all, activities in the detailed engineering and specification phase will be done in the earlier phases. It means that significant payment for the engineering phase, which may count up to 40 per cent of the design cost, can no longer be expected. As engineering work is done concurrently with the design, a new proportion of the payment in the early design phase is necessary.4. Review of ongoing hospital building projects using BIMIn The Netherlands, the changing roles in hospital building projects are part of the strategy, which aims at achieving a sustainable real estate in response to the changing healthcare policy. Referring to literature and previous research, the main factors that influence the success of the changing roles can be concluded as: the implementation of an integrated procurementmethod and a life-cycle design approach for a sustainable collaborative process; the agreement on the BIM structure and the intellectual rights; and the integration of the role of a model manager. The preceding sections have discussed the conceptual thinking on how to deal with these factors effectively. This current section observes two actual projects and compares the actual practice with the conceptual view respectively.The main issues, which are observed in the case studies, are: the selected procurement method and the roles of the involved parties within this method;the implementation of the life-cycle design approach;the type, structure, and functionalities of BIM used in the project;the openness in data sharing and transfer of the model, and the intended use of BIM in the future; and the roles and tasks of the model manager.The pilot experience of hospital building projects using BIM in the Netherlands can be observed at University Medical Centre St Radboud (further referred as UMC) and Maxima Medical Centre (further referred as MMC). At UMC, the new building project for the Faculty of Dentistry in the city of Nijmegen has been dedicated as a BIM pilot project. At MMC, BIM is used in designing new buildings for Medical Simulation and Mother-and-Child Centre in the city of Veldhoven.The first case is a project at the University Medical Centre (UMC) St Radboud. UMC is more than just a hospital. UMC combines medical services, education and research. More than 8500 staff and 3000 students work at UMC. As a part of the innovative real estate strategy, UMC has considered to use BIM for its building projects. The new development of the Faculty ofDentistry and the surrounding buildings on the Kapittelweg in Nijmegen has been chosen as a pilot project to gather practical knowledge and experience on collaborative processes with BIM support.The main ambition to be achieved through the use of BIM in the building projects at UMC can be summarised as follows: using 3D visualisation to enhance the coordination and communication among the building actors, and the user participation in design;integrating the architectural design with structural analysis, energy analysis, cost estimation, and planning;interactively evaluating the design solutions against the programme of requirements and specifications;reducing redesign/remake costs through clash detection during the design process; andoptimising the management of the facility through the registration of medical installations andequipments, fixed and flexible furniture, product and output specifications, and operational data.The second case is a project at the Maxima Medical Centre (MMC). MMC is a large hospital resulted from a merger between the Diaconessenhuis in Eindhoven and St Joseph Hospital in Veldhoven. Annually the 3,400 staff of MMC provides medical services to more than 450,000 visitors and patients. A large-scaled extension project of the hospital in Veldhoven is a part of its real estate strategy. A medical simulation centre and a women-and-children medical centre are among the most important new facilities within this extension project. The design has been developed using 3D modelling with several functionalities of BIM.The findings from both cases and the analysis are as follows.Both UMC and MMC opted for a traditional procurement method in which the client directly contracted an architect, a structural engineer, and a mechanical, electrical and plumbing (MEP) consultant in the design team. Once the design and detailed specifications are finished, a tender procedure will follow to select a contractor. Despite the choice for this traditional method, many attempts have been made for a closer and more effective multidisciplinary collaboration. UMC dedicated a relatively long preparation phase with the architect, structural engineer and MEP consultant before the design commenced. This preparation phase was aimed at creating a common vision on the optimal way for collaboration using BIM as an ICT support. Some results of this preparation phase are: a document that defines the common ambition for the project and the collaborative working process and a semi-formal agreement that states the commitment of the building actors for collaboration. Other than UMC, MMC selected an architecture firm with an in-house engineering department. Thus, the collaboration between the architect and structural engineer can take place within the same firm using the same software application.Regarding the life-cycle design approach, the main attention is given on life-cycle costs, maintenance needs, and facility management. Using BIM, both hospitals intend to get a much better insight in these aspects over the life-cycle period. The life-cycle sustainability criteria are included in the assignments for the design teams. Multidisciplinary designers and engineers are asked to collaborate more closely and to interact with the end-users to address life-cycle requirements. However, ensuring the building actors to engage in an integrated collaboration to generate sustainable design solutions that meet the life-cycle。

毕业论文中英文资料外文翻译文献Architecture StructureWe have and the architects must deal with the spatial aspect of activity, physical, and symbolic needs in such a way that overall performance integrity is assured. Hence, he or she well wants to think of evolving a building environment as a total system of interacting and space forming subsystems. Is represents a complex challenge, and to meet it the architect will need a hierarchic design process that provides at least three levels of feedback thinking: schematic, preliminary, and final.Such a hierarchy is necessary if he or she is to avoid being confused , at conceptual stages of design thinking ,by the myriad detail issues that can distract attention from more basic consideration s .In fact , we can say that an architect’s ability to distinguish the more basic form the more detailed issues is essential to his success as a designer .The object of the schematic feed back level is to generate and evaluate overall site-plan, activity-interaction, and building-configuration options .To do so the architect must be able to focus on the interaction of the basic attributes of the site context, the spatial organization, and the symbolism as determinants of physical form. This means that ,in schematic terms ,the architect may first conceive and model a building design as an organizational abstraction of essential performance-space in teractions.Then he or she may explore the overall space-form implications of the abstraction. As an actual building configuration option begins to emerge, it will be modified to include consideration for basic site conditions.At the schematic stage, it would also be helpful if the designer could visualize his or her options for achieving overall structural integrity and consider the constructive feasibility and economic of his or her scheme .But this will require that the architect and/or a consultant be able to conceptualize total-system structural options in terms of elemental detail .Such overall thinking can be easily fed back to improve the space-form scheme.At the preliminary level, the architect’s emphasis will shift to the elaboration of his or her more promising schematic design options .Here the architect’s structural needs will shift toapproximate design of specific subsystem options. At this stage the total structural scheme is developed to a middle level of specificity by focusing on identification and design of major subsystems to the extent that their key geometric, component, and interactive properties are established .Basic subsystem interaction and design conflicts can thus be identified and resolved in the context of total-system objectives. Consultants can play a significant part in this effort; these preliminary-level decisions may also result in feedback that calls for refinement or even major change in schematic concepts.When the designer and the client are satisfied with the feasibility of a design proposal at the preliminary level, it means that the basic problems of overall design are solved and details are not likely to produce major change .The focus shifts again ,and the design process moves into the final level .At this stage the emphasis will be on the detailed development of all subsystem specifics . Here the role of specialists from various fields, including structural engineering, is much larger, since all detail of the preliminary design must be worked out. Decisions made at this level may produce feedback into Level II that will result in changes. However, if Levels I and II are handled with insight, the relationship between the overall decisions, made at the schematic and preliminary levels, and the specifics of the final level should be such that gross redesign is not in question, Rather, the entire process should be one of moving in an evolutionary fashion from creation and refinement (or modification) of the more general properties of a total-system design concept, to the fleshing out of requisite elements and details.To summarize: At Level I, the architect must first establish, in conceptual terms, the overall space-form feasibility of basic schematic options. At this stage, collaboration with specialists can be helpful, but only if in the form of overall thinking. At Level II, the architect must be able to identify the major subsystem requirements implied by the scheme and substantial their interactive feasibility by approximating key component properties .That is, the properties of major subsystems need be worked out only in sufficient depth to very the inherent compatibility of their basic form-related and behavioral interaction . This will mean a somewhat more specific form of collaboration with specialists then that in level I .At level III ,the architect and the specific form of collaboration with specialists then that providing for all of the elemental design specifics required to produce biddable construction documents .Of course this success comes from the development of the Structural Material.1.Reinforced ConcretePlain concrete is formed from a hardened mixture of cement ,water ,fine aggregate, coarse aggregate (crushed stone or gravel),air, and often other admixtures. The plastic mix is placed and consolidated in the formwork, then cured to facilitate the acceleration of the chemical hydration reaction lf the cement/water mix, resulting in hardened concrete. The finished product has high compressive strength, and low resistance to tension, such that its tensile strength is approximately one tenth lf its compressive strength. Consequently, tensile and shear reinforcement in the tensile regions of sections has to be provided to compensate for the weak tension regions in the reinforced concrete element.It is this deviation in the composition of a reinforces concrete section from the homogeneity of standard wood or steel sections that requires a modified approach to the basic principles of structural design. The two components of the heterogeneous reinforced concrete section are to be so arranged and proportioned that optimal use is made of the materials involved. This is possible because concrete can easily be given any desired shape by placing and compacting the wet mixture of the constituent ingredients are properly proportioned, the finished product becomes strong, durable, and, in combination with the reinforcing bars, adaptable for use as main members of any structural system.The techniques necessary for placing concrete depend on the type of member to be cast: that is, whether it is a column, a bean, a wall, a slab, a foundation. a mass columns, or an extension of previously placed and hardened concrete. For beams, columns, and walls, the forms should be well oiled after cleaning them, and the reinforcement should be cleared of rust and other harmful materials. In foundations, the earth should be compacted and thoroughly moistened to about 6 in. in depth to avoid absorption of the moisture present in the wet concrete. Concrete should always be placed in horizontal layers which are compacted by means of high frequency power-driven vibrators of either the immersion or external type, as the case requires, unless it is placed by pumping. It must be kept in mind, however, that over vibration can be harmful since it could cause segregation of the aggregate and bleeding of the concrete.Hydration of the cement takes place in the presence of moisture at temperatures above 50°F. It is necessary to maintain such a condition in order that the chemical hydration reaction can take place. If drying is too rapid, surface cracking takes place. This would result in reduction of concrete strength due to cracking as well as the failure to attain full chemical hydration.It is clear that a large number of parameters have to be dealt with in proportioning a reinforced concrete element, such as geometrical width, depth, area of reinforcement, steel strain, concrete strain, steel stress, and so on. Consequently, trial and adjustment is necessary in the choice ofconcrete sections, with assumptions based on conditions at site, availability of the constituent materials, particular demands of the owners, architectural and headroom requirements, the applicable codes, and environmental reinforced concrete is often a site-constructed composite, in contrast to the standard mill-fabricated beam and column sections in steel structures.A trial section has to be chosen for each critical location in a structural system. The trial section has to be analyzed to determine if its nominal resisting strength is adequate to carry the applied factored load. Since more than one trial is often necessary to arrive at the required section, the first design input step generates into a series of trial-and-adjustment analyses.The trial-and –adjustment procedures for the choice of a concrete section lead to the convergence of analysis and design. Hence every design is an analysis once a trial section is chosen. The availability of handbooks, charts, and personal computers and programs supports this approach as a more efficient, compact, and speedy instructional method compared with the traditional approach of treating the analysis of reinforced concrete separately from pure design.2. EarthworkBecause earthmoving methods and costs change more quickly than those in any other branch of civil engineering, this is a field where there are real opportunities for the enthusiast. In 1935 most of the methods now in use for carrying and excavating earth with rubber-tyred equipment did not exist. Most earth was moved by narrow rail track, now relatively rare, and the main methods of excavation, with face shovel, backacter, or dragline or grab, though they are still widely used are only a few of the many current methods. To keep his knowledge of earthmoving equipment up to date an engineer must therefore spend tine studying modern machines. Generally the only reliable up-to-date information on excavators, loaders and transport is obtainable from the makers.Earthworks or earthmoving means cutting into ground where its surface is too high ( cuts ), and dumping the earth in other places where the surface is too low ( fills). Toreduce earthwork costs, the volume of the fills should be equal to the volume of the cuts and wherever possible the cuts should be placednear to fills of equal volume so as to reduce transport and double handlingof the fill. This work of earthwork design falls on the engineer who lays out the road since it is the layout of the earthwork more than anything else which decides its cheapness. From the available maps ahd levels, the engineering must try to reach as many decisions as possible in the drawing office by drawing cross sections of the earthwork. On the site when further information becomes available he can make changes in jis sections and layout,but the drawing lffice work will not have been lost. It will have helped him to reach the best solution in the shortest time.The cheapest way of moving earth is to take it directly out of the cut and drop it as fill with the same machine. This is not always possible, but when it canbe done it is ideal, being both quick and cheap. Draglines, bulldozers and face shovels an do this. The largest radius is obtained with thedragline,and the largest tonnage of earth is moved by the bulldozer, though only over short distances.The disadvantages of the dragline are that it must dig below itself, it cannot dig with force into compacted material, it cannot dig on steep slopws, and its dumping and digging are not accurate.Face shovels are between bulldozers and draglines, having a larger radius of action than bulldozers but less than draglines. They are anle to dig into a vertical cliff face in a way which would be dangerous tor a bulldozer operator and impossible for a dragline. Each piece of equipment should be level of their tracks and for deep digs in compact material a backacter is most useful, but its dumping radius is considerably less than that of the same escavator fitted with a face shovel.Rubber-tyred bowl scrapers are indispensable for fairly level digging where the distance of transport is too much tor a dragline or face shovel. They can dig the material deeply ( but only below themselves ) to a fairly flat surface, carry it hundreds of meters if need be, then drop it and level it roughly during the dumping. For hard digging it is often found economical to keep a pusher tractor ( wheeled or tracked ) on the digging site, to push each scraper as it returns to dig. As soon as the scraper is full,the pusher tractor returns to the beginning of the dig to heop to help the nest scraper.Bowl scrapers are often extremely powerful machines;many makers build scrapers of 8 cubic meters struck capacity, which carry 10 m ³ heaped. The largest self-propelled scrapers are of 19 m ³struck capacity ( 25 m ³ heaped )and they are driven by a tractor engine of 430 horse-powers.Dumpers are probably the commonest rubber-tyred transport since they can also conveniently be used for carrying concrete or other building materials. Dumpers have the earth container over the front axle on large rubber-tyred wheels, and the container tips forwards on most types, though in articulated dumpers the direction of tip can be widely varied. The smallest dumpers have a capacity of about 0.5 m ³, and the largest standard types are of about 4.5 m ³. Special types include the self-loading dumper of up to 4 m ³ and the articulated type of about 0.5 m ³. The distinction between dumpers and dump trucks must be remembered .dumpers tip forwards and the driver sits behind the load. Dump trucks are heavy, strengthened tipping lorries, the driver travels in front lf the load and the load is dumped behind him, so they are sometimes called rear-dump trucks.3.Safety of StructuresThe principal scope of specifications is to provide general principles and computational methods in order to verify safety of structures. The “ safety factor ”, which according to modern trends is independent of the nature and combination of the materials used, can usually be defined as the ratio between the conditions. This ratio is also proportional to the inverse of the probability ( risk ) of failure of the structure.Failure has to be considered not only as overall collapse of the structure but also asunserviceability or, according to a more precise. Common definition. As the reaching of a “ limit state ” which causes the construction not to accomplish the task it was designed for. Ther e are two categories of limit state :(1)Ultimate limit sate, which corresponds to the highest value of the load-bearing capacity. Examples include local buckling or global instability of the structure; failure of some sections and subsequent transformation of the structure into a mechanism; failure by fatigue; elastic or plastic deformation or creep that cause a substantial change of the geometry of the structure; and sensitivity of the structure to alternating loads, to fire and to explosions.(2)Service limit states, which are functions of the use and durability of the structure. Examples include excessive deformations and displacements without instability; early or excessive cracks; large vibrations; and corrosion.Computational methods used to verify structures with respect to the different safety conditions can be separated into:(1)Deterministic methods, in which the main parameters are considered as nonrandom parameters.(2)Probabilistic methods, in which the main parameters are considered as random parameters.Alternatively, with respect to the different use of factors of safety, computational methods can be separated into:(1)Allowable stress method, in which the stresses computed under maximum loads are compared with the strength of the material reduced by given safety factors.(2)Limit states method, in which the structure may be proportioned on the basis of its maximum strength. This strength, as determined by rational analysis, shall not be less than that required to support a factored load equal to the sum of the factored live load and dead load ( ultimate state ).The stresses corresponding to working ( service ) conditions with unfactored live and dead loads are compared with prescribed values ( service limit state ) . From the four possible combinations of the first two and second two methods, we can obtain some useful computational methods. Generally, two combinations prevail:(1)deterministic methods, which make use of allowable stresses.(2)Probabilistic methods, which make use of limit states.The main advantage of probabilistic approaches is that, at least in theory, it is possible to scientifically take into account all random factors of safety, which are then combined to define the safety factor. probabilistic approaches depend upon :(1) Random distribution of strength of materials with respect to the conditions of fabrication and erection ( scatter of the values of mechanical properties through out the structure );(2) Uncertainty of the geometry of the cross-section sand of the structure ( faults andimperfections due to fabrication and erection of the structure );(3) Uncertainty of the predicted live loads and dead loads acting on the structure;(4)Uncertainty related to the approximation of the computational method used ( deviation of the actual stresses from computed stresses ).Furthermore, probabilistic theories mean that the allowable risk can be based on several factors, such as :(1) Importance of the construction and gravity of the damage by its failure;(2)Number of human lives which can be threatened by this failure;(3)Possibility and/or likelihood of repairing the structure;(4) Predicted life of the structure.All these factors are related to economic and social considerations such as：(1) Initial cost of the construction;(2) Amortization funds for the duration of the construction;(3) Cost of physical and material damage due to the failure of the construction;(4) Adverse impact on society;(5) Moral and psychological views.The definition of all these parameters, for a given safety factor, allows construction at the optimum cost. However, the difficulty of carrying out a complete probabilistic analysis has to be taken into account. For such an analysis the laws of the distribution of the live load and its induced stresses, of the scatter of mechanical properties of materials, and of the geometry of the cross-sections and the structure have to be known. Furthermore, it is difficult to interpret the interaction between the law of distribution of strength and that of stresses because both depend upon the nature of the material, on the cross-sections and upon the load acting on the structure. These practical difficulties can be overcome in two ways. The first is to apply different safety factors to the material and to the loads, without necessarily adopting the probabilistic criterion. The second is an approximate probabilistic method which introduces some simplifying assumptions ( semi-probabilistic methods ) .文献翻译建筑师必须从一种全局的角度出发去处理建筑设计中应该考虑到的实用活动，物质及象征性的需求。

山东建筑大学毕业论文外文文献及译文
毕业论文要求1
1. 本次发给你四个文件：论文要求1，任务书，开题报告，论文的结构建议。

2. 阅读开题报告的文献综述一栏，然后阅读相关的书籍、著作、期刊文章或网络上查阅到的文章，主要阅读你的文章中的与你的论文主题相关的内容；
3. 在3月底以前完成“外文文献及译文”内容。

查找与你的论文题目有一定关
系的著作、期刊或网络文章上的英文内容，并将英文翻译成中文。

4. 请将英文原文与你的中文翻译部分按照下面给你的参考格式完成。

格式如后
面的第2页开始到最后。

其中文献、资料来源要注明是著作、网络、期刊等的哪一种，例如，参考的格式中注明的就是著作。

5. 注意参考格式中的页眉、页脚、题目字号、字体、正文内容字体、字号。

你
撰写的外文文献要与参考格式的要求一致。

6. 外文文献部分要求字数在5000字以上。

即中文翻译内容的字数要达到5页以
上，含表格、图样等。

7. 对照论文的结构建议，查阅相应的内容，开始构思论文。

8. 外文文献及译文完成后，及时发给老师电子版。

以便审校。

老师：徐宁，
2014年3月9号
- 1 -。

（Sheaｒ waｌl ｓt ｒuctural desigｎ ofh ｉgh-ｌev ｅl fr ａmeworkＷｕ Jiche ｎgＡbstract ： In t ｈis pape ｒ the basic c ｏｎcepts of ｍａn ｐow ｅr ｆｒom th ｅ ｆra ｍｅ sh ｅａr w ａｌl str ｕc ｔｕｒｅ, analy ｓis of the ｓtruct ｕr ａｌ des ｉgn ｏf th ｅ c ｏnt ｅnt ｏｆ t ｈe fr ａme she ａr wall, in ｃｌudi ｎg the ｓeism ｉc wa ｌl she ａr spa本科毕业设计外文文献翻译学校代码： 10128学 号：题 目：Shear wall structural design of high-level framework 学生姓名： 学 院：土木工程学院 系 别：建筑工程系 专 业：土木工程专业（建筑工程方向） 班 级：土木08-（5）班 指导教师： (副教授)ｎratiｏdesign, ａnd a concrｅtｅｓtruｃtuｒe in thｅmｏst co ｍmonｌy useｄframe shear walｌstｒｕcturｅtｈｅdesign of p ｏiｎｔs to note.Keyworｄs: cｏncrｅｔｅ; fｒaｍｅshｅａｒwall sｔｒucｔｕre；hiｇh－risｅbuildｉｎｇsThe wall is aｍoｄern high－rｉｓe buiｌdiｎgs is an iｍpo ｒｔant buiｌdinｇconｔｅnt, the ｓize of thｅfraｍe sheａr wall must comｐly with buildｉng reguｌａtｉons. The pｒｉnｃipｌe is ｔhat the largeｒsｉzｅbｕt the thｉｃknessｍuｓt ｂｅsmaller gｅoｍetric featｕrｅｓshoｕlｄｂe ｐｒeｓented ｔo the pｌatｅ,ｔｈe forｃe is close to cylｉndrｉcal.Ｔhe waｌl sｈｅar wa ｌl strｕｃｔure ｉs a flaｔcomｐonent. Itｓeｘposure to tｈe force aｌoｎg ｔhe ｐlane leｖｅl of theｒole ofｓｈear and momｅｎt, must also take ｉｎtｏａccounｔthe veｒｔical preｓsure.Opeｒate unｄer thｅcomｂiｎed actｉｏn oｆbenｄing momeｎts and axial force aｎｄsheａr forcｅbｙthe caｎtilｅｖｅr deep beａm uｎder ｔｈe acｔion of the force leveｌｔo lｏo ｋinto ｔｈe bottom mouｎted on ｔhe basｉs of. Sheaｒｗaｌl ｉｓdiｖidｅｄinｔo a whole walｌand ｔheａssoｃiated ｓｈeａr wall in thｅactual project,a wholｅwａlｌfor ｅxａmpl ｅ, suｃh as ｇenｅraｌhｏusiｎｇｃonstｒuction in tｈe gablｅｏr fish bｏne strｕcture ｆｉlｍwａｌls ａnd small opｅningｓwall.Cｏupled Sｈeａr ｗalls are ｃonnｅcted bｙｔhｅcｏupｌing ｂeam shｅａr wall.Buｔｂecause tｈeｇｅnerａlｃｏupling beaｍstｉｆfness is less thaｎｔhe wall stiｆfnｅsｓof the lｉmbs，ｓｏ. Wａlｌliｍb aｌonｅis obviｏus.The ｃｅntral beam of tｈeｉnflｅｃtion pｏｉnｔtｏpay aｔtenｔiｏｎto tｈeｗaｌl pressｕre thａn the limiｔs of the lｉmb axis. Will forｍa shortｗiｄe beａms，widｅcolｕmn wａll liｍｂｓhear wａll ｏpｅnings toｏlarge ｃomｐonｅnt aｔbothｅn ｄs ｗith jｕst the domain of vａｒiabｌe crosｓ－ｓecｔｉon ro ｄin ｔhe intｅrｎａｌforcｅｓｕnder tｈｅaｃtioｎof maｎy Ｗalｌlｉmb iｎflｅcｔion point Ｔhｅｒeｆoｒe, ｔhe cａｌcula ｔions ａｎd consｔruction sｈouldAccordinｇtｏappｒoxiｍａｔe tｈe framｅstｒucｔure to ｃonsideｒ.Tｈe desｉｇｎof ｓhｅａr walls ｓhoulｄbe based on the cｈａractｅrisｔics ｏf ａvａｒｉｅty oｆwall itseｌｆ,ａnd dｉfferｅnｔmeｃhanical ch ａrａcteｒisｔｉcｓand requireｍents,wall oｆthｅinternａｌforceｄistrｉbutｉon and failurｅmoｄｅs ｏf sｐecific and cｏmprehensive ｃonｓideration of the design rｅinｆorcemｅnt aｎd stｒuctural measｕres. Ｆrame sｈear wall ｓｔrｕctuｒe deｓiｇn is to cｏｎsider the ｓtructｕre of the oｖerall ａnａｌysis for ｂoｔh dｉrecｔｉｏｎsｏｆthｅhｏrｉzontal and vｅrtiｃalｅfｆects. Oｂtain thｅinternal force ｉs reｑuirｅd in ａccｏrdancｅｗｉｔｈtｈe bias or paｒtｉal ｐull normal sｅcｔｉon forｃｅｃaｌculatiｏn.The waｌl strｕcture oｆtheｆｒame sｈear ｗall ｓｔructural dｅsign of ｔhe coｎtent frame hｉgh-rise buildings, in ｔhe actual ｐrｏjeｃｔiｎｔhｅuse of thｅｍoｓt seisｍic ｗａlls have suffiｃient quantitｉeｓto meｅt ｔheｌｉmitsｏf the lａyer displacement, the loｃation iｓｒelａtiｖely flexiblｅ. Seiｓmic wａll for cｏntinuous layout，ｆulｌ-length ｔhroｕgh．Should bｅdesigned to avoid the waｌl mutaｔioｎs ｉn limb ｌｅｎgth and alignment is noｔuｐａnd down the ｈolｅ. The samｅtｉme．Tｈe inｓide of ｔhe hole marginｓcｏlｕｍｎshｏｕld not ｂｅｌｅssｔhan３00mm ｉｎordｅｒtｏguaraｎteｅtheｌengtｈof the colｕｍn ａs the edgｅof tｈe coｍponent and constｒａiｎt eｄgｅcｏｍponeｎts．Thｅbi-direc ｔiｏnal laｔerａl forｃe ｒesiｓting strucｔurａl fｏrm of verticａl aｎｄhorｉzontaｌwalｌcoｎnected.Eａｃh ｏｔhｅr as ｔhe ａffiｎiｔｙof the shｅar wall. Ｆor ｏnｅ, two seismic frａme sｈe ａr ｗalｌｓ,ｅｖen beam highｒatio ｓhould noｔgreateｒthan 5 aｎd a height of nｏt less thaｎ400mm.Midline colｕmnａnd beａmｓ,wall ｍｉdline shouｌdｎoｔbe greaｔer tha ｎthe ｃoｌｕmｎwidｔｈof1/4，ｉn ordｅr ｔｏreｄuce thｅtoｒsional eｆfect of the sｅiｓmｉｃacｔion ｏnｔｈｅｃolｕmn．Oｔhｅrwｉsｅcan be taken tｏstrengthｅn theｓtirruprａｔｉo iｎｔhe cｏlｕmn tｏmake ｕp.If thｅshear wａｌl sheａｒsｐａn ｔhａnｔhe ｂig twｏ. Ｅveｎthe beａｍcro ｓs-heｉｇht ratiｏgreateｒthan 2.5, ｔhen tｈe design presｓｕｒe ｏf thｅｃｕt shoulｄnoｔmａkｅａｂig 0.2. Howevｅｒ, ｉf the sheａｒwallｓheａr sｐａｎｒatiｏof ｌess than two couｐlinｇｂeａms sｐan of ｌeｓs than ２．5, then the shear coｍｐres ｓiｏn rａｔiｏis noｔgreaｔer thａn 0.15. Thｅｏther haｎｄ，ｔhe bｏttom oｆthe fraｍe ｓhｅar walｌstructure ｔo enhａnce tｈｅdｅsign sｈould ｎoｔbe leｓs thaｎ２０0mmａnd noｔlesｓthaｎstorey 1/１6，othｅｒｐaｒtｓｓhｏulｄnot be lｅss than 160mm ａnd ｎｏt ｌｅss thaｎｓtoｒey １/20. Arounｄthe wall of the frame ｓhｅar ｗall strucｔure sｈｏulｄbe set ｔo the beａm or dark bｅamａnd the sｉｄe columｎｔｏform a borｄｅr. Ｈoｒizｏntａl ｄｉｓtrｉbuｔioｎoｆsｈear waｌls cａn from the sheａr effect，tｈｉs design wｈen ｂuilｄｉng higｈｅr longeｒor fｒaｍｅｓtructｕre reinfoｒcｅment shｏuld be aｐprｏpｒiatelｙincｒeａｓed, ｅspｅcｉａlｌy in the sｅnｓitivｅｐarts of the beam pｏsition ｏr teｍperaｔuｒe, stiffnｅsｓchａnge is besｔappｒopriatｅly increased, ｔｈeｎcｏnsidｅration sｈoulｄbe ｇｉveｎｔo the wａlｌvertｉcaｌreiｎforｃemeｎt,becaｕse ｉt is mａinly fｒom the bｅnding efｆecｔ, aｎｄtake in ｓome ｍｕlti-ｓtorｅｙshｅａｒｗａll structuｒereinforcｅｄreｉnｆorceｍent rate -likｅlｅsｓconｓtｒained edgｅｏｆｔhｅcomｐonent or components reinforｃemeｎt of thｅedge ｃomｐｏnent.Referｅnces: [1 sad Hａyaｓhi,He Yaming. Ｏn the shorｔshｅar ｗall ｈigh-riｓe bｕilｄinｇｄesign ［J]．Kｅｙｕaｎ, 2008, (O2).高层框架剪力墙结构设计吴继成摘要: 本文从框架剪力墙结构设计的基本概念人手, 分析了框架剪力墙的构造设计内容, 包括抗震墙、剪跨比等的设计, 并出混凝土结构中最常用的框架剪力墙结构设计的注意要点。

外文翻译要求：1、外文资料与毕业设计（论文）选题密切相关，译文准确、质量好。

2、阅读2篇幅以上（10000字符左右）的外文资料，完成2篇不同文章的共2000汉字以上的英译汉翻译3、外文资料可以由指导教师提供，外文资料原则上应是外国作者。

严禁采用专业外语教材文章。

4、排序：“一篇中文译文、一篇外文原文、一篇中文译文、一篇外文原文”。

插图内文字及图名也译成中文。

5、标题与译文格式（字体、字号、行距、页边距等）与论文格式要求相同。

下页附：外文翻译与原文参考格式2英文翻译 (黑体、四号、顶格)外文原文出处：(译文前列出外文原文出处、作者、国籍，译文后附上外文原文)《ASHRAE Handbook —Refrigeration 》.CHAPTER3 .SYSTEM Practices for ammonia 3.1 System Selection 3.2 Equipment3.10 Reciprocating Compressors第3章 氨制冷系统的实施3.1 系统选择在选择一个氨制冷系统设计时，须要考虑一些设计决策要素，包括是否采用（1）单级压缩（2）带经济器的压缩（3）多级压缩（4）直接蒸发（5）满液式（6）液体再循环（7）载冷剂。

单级压缩系统基本的单级压缩系统由蒸发器、压缩机、冷凝器、储液器（假如用的话）和制冷剂控制装置（膨胀阀、浮球阀等）。

1997 ASHRAE 手册——“原理篇”中的第一章讨论了压缩制冷循环。

图1.壳管式经济器的布置外文翻译的标题与译文中的字体、字号、行距、页边距等与论文格式相同。

英文原文(黑体、四号、顶格)英文翻译2（黑体，四号，顶格）外文原文出处：（黑体，四号，顶格）P. Fanning. Nonlinear Models of Reinforced and Post-tensioned Concrete Beams. Lecturer, Department of Civil Engineering, University College Dublin. Received 16 Jul 2001.非线形模型钢筋和后张法预应力混凝土梁摘要:商业有限元软件一般包括混凝土在荷载做用下非线性反应的专用数值模型。

Computer networking summarizeNetworking can be defined as the linking of people, resources and ideas. Networking occurs via casual encounters, meetings, telephone conversation, and the printed words. Now the computer networking provide beings with new networking capabilities. Computer network are important for services because service tasks are information intensive. During the is transmitted between clients, coworkers, management, funding sources, and policy makers. Tools with rapidly speed up communication will dramatically affect services.Computer network growing explosively. Two decades ago, few people essential part of our infrastructure. Networking is used in every aspect of business, including advertising, production, shipping, planning, bulling, and accounting. Consequently, most corporations in on-line libraries around the world. Federal, state, and local government offices use networks, as do military organizations. In short, computer networks are everywhere.The growth in networking economic impact as well. An entire industry jobs for people with more networking expertise. Companies need workers to plan, acquire, install, operate, and manage the addition computer programming is no longer restricted to individual computers; programmers are expected to design and implement application software that can communicate with software on other computers.Computer networks link computers by communication lines and software protocols, allowing data to be exchanged rapidly and reliably. Traditionally, they split between wide area networks (WANs) and local area networks (LANs). A WAN is a network connected over long-distance telephone lines, and a LAN is a localized network usually in one building or a group of buildings close together. The distinction, computers. Today networks carry e-mail, provide access to public databases, and are beginning to be used for distributed systems. Networks also allow users in one locality to share expensive resources, such as printers and disk-systems.Distributed computer systems are built using networked computers that cooperate to perform tasks. In this environment, each part of the networked system does what it is best at. The of a personal computer or workstation provides a good user interface. The mainframe, on the other the results to the users. In a distributed environment, a user might use in a special language (e. g. Structured Query Language-SQL), to the mainframe, which then parrrses the query, returning the user only the data requested. The user might then use the data. By passing back the user’s PC only the specific information requested, network traffic is reduced. If the whole file were transmitted, the PC would then of one network to access the resources on a different type of network. For example, a gateway could be used to connect a local area network of personal computers to a mainframe computer network. For example, if a company this example, using a bridge makes more sense than joining all thepersonal computers together in one large network because the individual departments only occasionally need to access information on the other network.Computer networking technology can be divided into four major aspects.The first is the data transmission. It explains that at the lowest level electrical signals traveling across wires are used to carry information, and shows be encoded using electrical signals.The second focuses on packet transmission. It explains why computer network use packets, and shows . LANs and WANs discussed above are two basic network.The third covers internetworking—the important idea that allows system, and TCPIP, the protocol technology used in global internet.The fourth explains networking applications. It focuses on , and programs provide services such as electronic mail and Web browsing.Continued growth of the global Internet is one of most interesting and exciting phenomena in networking. A decade ago, the Internet was a research project that involved a few dozen sites. Today, the Internet into a production communication system that reaches millions of people in almost all countries on all continents around the world. In the United States, the Internet connects most corporations, colleges and universities, as well as federal, state, and local government offices. It will soon reach most elementary,junior, and senior addition, many private residences can reach the Internet through a dialup telephone connection. Evidence of the Internet’s impact on society can be seen in advertisements, in magazines and on television, which often contain a reference to an Internet Web site that provide additional information about the advertiser’s products and services.A large organization with diverse networking requirements needs multiple physical networks. More important, if the organization chooses the type network that is best for each task, the organization will network can only communicate with other computers attached to same network. The problem became evident in the 1970s as large organizations began to acquire multiple networks. Each network in the organizations formed an island. In many early installations, each computer attached to a single network and employees employees was given access to multiple svreens and keyboards, and the employee was forced to move form one computer to another to send a massage across the appropriate network. Users are neither satisfied nor productive when they must use a separate computer. Consequently, most modern computer communication syetem allow communication between any two computers analogous to the way a telephone system provides communication between any two telephones. Known as universal service, the concept is a fundamental part of networking. With universal service, a user on any computer in any part of an organization can send messages or data to any other users. Furthermore, a user does not need to change computer systems whenchanging tasks—all information is available to all computers. As a result, users are more productive.The basic component used to commect organization to choose network technologies appropriate for each need, and to use routers to connect all networks into a single internet.The goal of internetworking is universal service across an internet, routers must agree to forward information from a source on one network to a specified destination on another. The task is complex because frame formats and addressing schemes used by underlying networks can differ. As s resulrt, protocol software is needed on computers and routers make universal service possible. Internet protocols overcome differences in frame formats and physical addresses to make communication pissible among networks that use different technologies.In general, internet software provides the appeatrance of a single, seamless communication system to which many computers attach. The syetem offers universal service :each computer is assigned an address, and any computer can send a packet to any other computer. Furthermore, internet protocol software —neither users nor application programs are a ware of the underlying physical networks or the routers that connect them.We say that an internet is a virtual network system because the communication system is an abstraction. That is, although a combination of of a uniform network syetem, no such network exists.Research on internetworking modern networking. In fact,internet techmology . Most large organizations already use internetworking as primary computer communication mechanism. Smaller organizations and individuals are beginning to do so as well. More inportant, the TCPIP technology computers in schools, commercial organications, government, military sites and individuals in almost all countries around the world.电脑网络简述网络可被定义为人、资源和思想的联接。