框架结构毕业设计外文文献翻译(外文原文中文翻译)

金融体制、融资约束与投资——来自OECD的实证分析R．SemenovDepartment of Economics，University of Nijmegen，Nijmegen（荷兰内梅亨大学，经济学院）这篇论文考查了OECD的11个国家中现金流量对企业投资的影响.我们发现不同国家之间投资对企业内部可获取资金的敏感性具有显著差异,并且银企之间具有明显的紧密关系的国家的敏感性比银企之间具有公平关系的国家的低.同时，我们发现融资约束与整体金融发展指标不存在关系.我们的结论与资本市场信息和激励问题对企业投资具有重要作用这种观点一致，并且紧密的银企关系会减少这些问题从而增加企业获取外部融资的渠道。

一、引言各个国家的企业在显著不同的金融体制下运行。

金融发展水平的差别(例如，相对GDP的信用额度和相对GDP的相应股票市场的资本化程度），在所有者和管理者关系、企业和债权人的模式中，企业控制的市场活动水平可以很好地被记录.在完美资本市场,对于具有正的净现值投资机会的企业将一直获得资金。

然而，经济理论表明市场摩擦，诸如信息不对称和激励问题会使获得外部资本更加昂贵，并且具有盈利投资机会的企业不一定能够获取所需资本.这表明融资要素，例如内部产生资金数量、新债务和权益的可得性，共同决定了企业的投资决策.现今已经有大量考查外部资金可得性对投资决策的影响的实证资料（可参考，例如Fazzari（1998）、 Hoshi(1991)、 Chapman（1996）、Samuel(1998））.大多数研究结果表明金融变量例如现金流量有助于解释企业的投资水平。

这项研究结果解释表明企业投资受限于外部资金的可得性。

很多模型强调运行正常的金融中介和金融市场有助于改善信息不对称和交易成本，减缓不对称问题,从而促使储蓄资金投着长期和高回报的项目,并且提高资源的有效配置（参看Levine（1997)的评论文章）。

因而我们预期用于更加发达的金融体制的国家的企业将更容易获得外部融资.几位学者已经指出建立企业和金融中介机构可进一步缓解金融市场摩擦。

中英文对照外文翻译(文档含英文原文和中文翻译)Create and comprehensive technology in the structure globaldesign of the buildingThe 21st century will be the era that many kinds of disciplines technology coexists , it will form the enormous motive force of promoting the development of building , the building is more and more important too in global design, the architect must seize the opportunity , give full play to the architect's leading role, preside over every building engineering design well. Building there is the global design concept not new of architectural design,characteristic of it for in an all-round way each element not correlated with building- there aren't external environment condition, building , technical equipment,etc. work in coordination with, and create the premium building with the comprehensive new technology to combine together.The premium building is created, must consider sustainable development , namely future requirement , in other words, how save natural resources as much as possible, how about protect the environment that the mankind depends on for existence, how construct through high-quality between architectural design and building, in order to reduce building equipment use quantity andreduce whole expenses of project.The comprehensive new technology is to give full play to the technological specialty of every discipline , create and use the new technology, and with outside space , dimension of the building , working in coordination with in an all-round way the building component, thus reduce equipment investment and operate the expenses.Each success , building of engineering construction condense collective intelligence and strength; It is intelligence and expectation that an architect pays that the building is created; The engineering design of the building is that architecture , structure , equipment speciality compose hardships and strength happenning; It is the diligent and sweat paid in design and operation , installation , management that the construction work is built up .The initial stage of the 1990s, our understanding that the concept of global design is a bit elementary , conscientious to with making some jobs in engineering design unconsciously , make some harvest. This text Hangzhou city industrial and commercial bank financial comprehensive building and Hangzhou city Bank of Communications financial building two building , group of " scientific and technological progress second prize " speak of from person who obtain emphatically, expound the fact global design - comprehensive technology that building create its , for reach global design outstanding architect in two engineering design, have served as the creator and persons who cooperate while every stage design and even building are built completely.Two projects come into operation for more than 4 years formally , run and coordinate , good wholly , reach the anticipated result, accepted and appreciated by the masses, obtain various kinds of honor .outstanding to design award , progress prize in science and technology , project quality bonus , local top ten view , best model image award ,etc., the ones that do not give to the architect and engineers without one are gratified and proud. The building is created Emphasizing the era for global design of the building, the architects' creation idea and design method should be broken through to some extent, creation inspirations is it set up in analysis , building of global design , synthesize more to burst out and at the foundation that appraise, learn and improve the integration capability exactly designed in building , possess the new knowledge system and thinking method , merge multi-disciplinary technology. We have used the new design idea in above-mentioned projects, have emphasized the globality created in building .Is it is it act as so as to explain to conceive to create two design overview and building of construction work these now.1) The financial comprehensive building of industrial and commercial bank of HangZhou,belong to the comprehensive building, with the whole construction area of 39,000 square meters, main building total height 84, 22, skirt 4 of room, some 6 storeys, 2 storeys of basements.Design overall thinking break through of our country bank building traditional design mode - seal , deep and serious , stern , form first-class function, create of multi-functional type , the style of opening , architecture integrated with the mode of the international commercial bank.The model of the building is free and easy, opened, physique was made up by the hyperboloid, the main building presented " the curved surface surrounded southwards ", skirt room presents " the curved surface surrounded northwards ", the two surround but become intension of " gathering the treasure ".Building flourishing upwards, elevation is it adopt large area solid granite wall to design, the belt aluminium alloy curtain wall of the large area and some glass curtain walls, and interweave the three into powerful and vigorous whole , chase through model and entity wall layer bring together , form concise , tall and straight , upward tendency of working up successively, have distinct and unique distinctions.Building level and indoor space are designed into a multi-functional type and style of opening, opening, negotiate , the official working , meeting , receiving , be healthy and blissful , visit combining together. Spacious and bright two storeys open in the hall unifiedly in the Italian marble pale yellow tone , in addition, the escalator , fountain , light set off, make the space seem very magnificent , graceful and sincere. Intelligent computer network center, getting open and intelligent to handle official business space and all related house distribute in all floor reasonably. Top floor round visit layer, lift all of Room visit layer , can have a panoramic view of the scenery of the West Lake , fully enjoy the warmth of the nature. 2) The financial building of Bank of Communications of Hangzhou, belong to the purely financial office block, with the whole construction area of 19,000 square meters, the total height of the building is 39.9 meters, 13 storeys on the ground, the 2nd Floor. Live in building degree high than it around location , designer have unique architectural appearance of style architectural design this specially, its elevation is designed into a new classical form , the building base adopts the rough granite, show rich capability , top is it burn granite and verticality bar and some form aluminum windows make up as the veneer to adopt, represent the building noble and refined , serious personality of the bank.While creating in above-mentioned two items, besides portraying the shape of the building and indoor space and outside environment minister and blending meticulously, in order to achieve the outstanding purpose of global design of the building , the architect , still according to the region and project characteristic, put forward the following requirement to every speciality:(1) Control the total height of the building strictly;(2) It favorable to the intelligent comfortable height of clearances to create; (3) Meet thefloor area of owner's demand;(4)Protect the environment , save the energy , reduce and make the investment;(5) Design meticulously, use and popularize the new technology; (6)Cooperate closely in every speciality, optimization design.Comprehensive technologyThe building should have strong vitality, there must be sustainable development space, there should be abundant intension and comprehensive new technology. Among above-mentioned construction work , have popularized and used the intelligent technology of the building , has not glued and formed the flat roof beam of prestressing force - dull and stereotyped structure technology and flat roof beam structure technology, baseplate temperature mix hole , technology of muscle and base of basement enclose new technology of protecting, computer control STL ice hold cold air conditioner technology, compounding type keeps warm and insulates against heat the technology of the wall , such new technologies as the sectional electricity distribution room ,etc., give architecture global design to add the new vitality of note undoubtedly.1, the intelligent technology of the buildingIn initial stage of the 1990s, the intelligent building was introduced from foreign countries to China only as a kind of concept , computer network standard is it soon , make information communication skeleton of intelligent building to pursue in the world- comprehensive wiring system becomes a kind of trend because of 10BASE-T. In order to make the bank building adapt to the development of the times, the designer does one's utmost to recommend and design the comprehensive wiring system with the leading eyes , this may well be termed the first modernized building which adopted this technical design at that time.(1) Comprehensive wiring system one communication transmission network, it make between speech and data communication apparatus , exchange equipment and other administrative systems link to each other, make the equipment and outside communication network link to each other too. It include external telecommunication connection piece and inside information speech all cable and relevant wiring position of data terminal of workspace of network. The comprehensive wiring system adopts the products of American AT&T Corp.. Connected up the subsystem among the subsystem , management subsystem , arterial subsystem and equipment to make up by workspace subsystem , level.(2) Automated systems of security personnel The monitoring systems of security personnel of the building divide into the public place and control and control two pieces of systemequipment with the national treasury special-purposly synthetically.The special-purpose monitoring systems of security personnel of national treasury are in the national treasury , manage the storehouse on behalf of another , transporting the paper money garage to control strictly, the track record that personnel come in and go out, have and shake the warning sensor to every wall of national treasury , the camera, infrared microwave detector in every relevant rooms, set up the automation of controlling to control.In order to realize building intellectuality, the architect has finished complete indoor environment design, has created the comfortable , high-efficient working environment , having opened up the room internal and external recreation space not of uniform size, namely the green one hits the front yard and roofing, have offered the world had a rest and regulated to people working before automation is equipped all day , hang a design adopt the special building to construct the node in concrete ground , wall at the same time.2, has not glued and formed the flat roof beam of prestressing force- dull and stereotyped structure technology and flat roof beam structure technologyIn order to meet the requirement with high assurance that the architect puts forward , try to reduce the height of structure component in structure speciality, did not glue and form the flat roof beam of prestressing force concrete - dull and stereotyped structure technology and flat roof beam structure technology after adopting.(1) Adopt prestressing force concrete roof beam board structure save than ordinary roof beam board concrete consumption 15%, steel consumption saves 27%, the roof beam reduces 300mm high.(2) Adopt flat roof beam structure save concrete about 10% consumption than ordinary roof beam board, steel consumption saves 6.6%, the roof beam reduces 200mm high.Under building total situation that height does not change , adopt above-mentioned structure can make the whole building increase floor area of a layer , have good economic benefits and social benefit.3, the temperature of the baseplate matches muscle technologyIn basement design , is it is it is it after calculating , take the perimeter to keep the construction technology measure warm to split to resist to go on to baseplate, arrange temperature stress reinforcing bar the middle cancelling , dispose 2 row receives the strength reinforcing bar up and down only, this has not only save the fabrication cost of the project but also met the basement baseplate impervious and resisting the requirement that splits.4, the foundation of the basement encloses and protects the new technology of design and operationAdopt two technological measures in enclosing and protecting a design:(1) Cantilever is it is it hole strength is it adopt form strengthen and mix muscle technology to design to protect to enclose, save the steel and invite 60t, it invests about 280,000 to save.(2) Is it is it protect of of elevation and keep roof beam technology to enclose , is it protect long to reduce 1.5m to enclose all to reduce, keep roof beam mark level on natural ground 1.5m , is it is it protect of lateral pressure receive strength some height to enclose to change, saving 137.9 cubic meters of concrete, steel 16.08t, reduces and invests 304,000 yuan directly through calculating.5, ice hold cold air conditioner technologyIce hold cold air conditioner technology belong to new technology still in our country , it heavy advantage that the electricity moves the peak and operates the expenses sparingly most. In design, is it ice mode adopt some (weight ) hold mode of icing , is it ice refrigeration to be plane utilization ratio high to hold partly to hold, hold cold capacity little , refrigeration plane capacity 30%-45% little than routine air conditioner equipment, one economic effective operational mode.Hold the implementation of the technology of the cold air conditioner in order to cooperate with the ice , has used intelligent technology, having adopted the computer to control in holding and icing the air conditioner system, the main task has five following respects:(1) According to the demand for user's cold load , according to the characteristic of the structure of the electric rate , set up the ice and hold the best operation way of the cold system automatically, reduce the operation expenses of the whole system;(2) Fully utilize and hold the capacity of the cold device, should try one's best to use up all the cold quantity held basically on the same day;(3) Automatic operation state of detection system, ensure ice hold cold system capital equipment normal , safe operation;(4) Automatic record parameter that system operate, display system operate flow chart and type systematic operation parameter report form;(5) Predict future cooling load, confirm the future optimization operation scheme.Ice hold cold air conditioner system test run for some time, indicate control system to be steady , reliable , easy to operate, the system operates the energy-conserving result remarkably.6, the compounding type keeps in the wall warm and insulates against heat To the area of Hangzhou , want heating , climate characteristic of lowering the temperature in summer in winter, is it protect building this structural design person who compound is it insulate against heat the wall to keep warm to enclose specially, namely: Fit up , keep warm , insulate against heat the three not to equal to the body , realize building energy-conservation better.Person who compound is it insulate against heat wall to combine elevation model characteristic , design aluminium board elevation renovation material to keep warm, its structure is: Fill out and build hollow brick in the frame structure, do to hang the American Fluorine carbon coating inferior mere aluminium board outside the hollow brick wall.Aluminium board spoke hot to have high-efficient adiabatic performance to the sun, under the same hot function of solar radiation, because the nature , color of the surface material are different from coarse degree, whether can absorb heat have great difference very , between surface and solar radiation hot absorption system (α ) and material radiation system (Cλ ) is it say to come beyond the difference this. Adopt α and Cλ value little surface material have remarkable result , board α、Cλ value little aluminium have, its α =0.26, Cλ =0.4, light gray face brick α =0.56, Cλ =4.3.Aluminium board for is it hang with having layer under air by hollow brick to do, because aluminium board is it have better radiation transfer to hot terms to put in layer among the atmosphere and air, this structure is playing high-efficient adiabatic function on indoor heating too in winter, so, no matter or can well realize building energy-conservation in winter in summer.7, popularize the technology of sectional electricity distribution roomConsider one layer paves Taxi " gold " value , the total distribution of the building locates the east, set up voltage transformer and low-voltage distribution in the same room in first try in the design, make up sectional electricity distribution room , save transformer substation area greatly , adopt layer assign up and down, mixing the switchyard system entirely after building up and putting into operation, the function is clear , the overall arrangement compactness is rational , the systematic dispatcher is flexible . The technology have to go to to use and already become the model extensively of the design afterwards.ConclusionThe whole mode designed of the building synthetically can raise the adaptability of the building , it will be the inevitable trend , environmental consciousness and awareness of saving energy especially after strengthening are even more important. Developing with the economy , science and technology constantly in our country, more advanced technology and scientific and technical result will be applied to the building , believe firmly that in the near future , more outstanding building global design will appear on the building stage of our country. We will be summarizing, progressing constantly constantly, this is that history gives the great responsibility of architect and engineer.译文：建筑结构整体设计-建筑创作和综合技术21世纪将是多种学科技术并存的时代，它必将形成推动建筑发展的巨大动力，建筑结构整体设计也就越来越重要，建筑师必须把握时机，充分发挥建筑师的主导作用，主持好各项建筑工程设计。

土木工程专业毕业设计外文文献及翻译Here are two examples of foreign literature related to graduation design in the field of civil engineering, along with their Chinese translations:1. Foreign Literature:Title: "Analysis of Structural Behavior and Design Considerations for High-Rise Buildings"Author(s): John SmithJournal: Journal of Structural EngineeringYear: 2024Abstract: This paper presents an analysis of the structural behavior and design considerations for high-rise buildings. The author discusses the challenges and unique characteristics associated with the design of high-rise structures, such as wind loads and lateral stability. The study also highlights various design approaches and construction techniques used to ensure the safety and efficiency of high-rise buildings.Chinese Translation:标题：《高层建筑的结构行为分析与设计考虑因素》期刊：结构工程学报年份：2024年2. Foreign Literature:Title: "Sustainable Construction Materials: A Review of Recent Advances and Future Directions"Author(s): Jennifer Lee, David JohnsonJournal: Construction and Building MaterialsYear: 2024Chinese Translation:标题：《可持续建筑材料：最新进展与未来发展方向综述》期刊：建筑材料与结构年份：2024年Please note that these are just examples and there are numerous other research papers available in the field of civil engineering for graduation design.。

中英文对照外文翻译文献(文档含英文原文和中文翻译)Structure in Design of ArchitectureAnd Structural MaterialWe have and the architects must deal with the spatial aspect of activity, physical, and symbolic needs in such a way that overall performance integrity is assured. Hence, he or she well wants to think of evolving a building environment as a total system of interacting and space forming subsystems. Is represents a complex challenge, and to meet it the architect will need a hierarchic design process that provides at least three levels of feedback thinking: schematic,preliminary, and final.Such a hierarchy is necessary if he or she is to avoid being confused , at conceptual stages of design thinking ,by the myriad detail issues that can distract attention from more basic considerations .In fact , we can say that an architect’s ability to distinguish the more basic form the more detailed issues is essential to his success as a designer .The object of the schematic feed back level is to generate and evaluate overall site-plan, activity-interaction, and building-configuration options .To do so the architect must be able to focus on the interaction of the basic attributes of the site context, the spatial organization, and the symbolism as determinants of physical form. This means that ,in schematic terms ,the architect may first conceive and model a building design as an organizational abstraction of essential performance-space in teractions.Then he or she may explore the overall space-form implications of the abstraction. As an actual building configuration option begins to emerge, it will be modified to include consideration for basic site conditions.At the schematic stage, it would also be helpful if the designer could visualize his or her options for achieving overall structural integrity and consider the constructive feasibility and economic ofhis or her scheme .But this will require that the architect and/or a consultant be able to conceptualize total-system structural options in terms of elemental detail .Such overall thinking can be easily fed back to improve the space-form scheme.At the preliminary level, the architect’s emphasis will shift to the elaboration of his or her more promising schematic design options .Here the architect’s structural needs will shift to approximate design of specific subsystem options. At this stage the total structural scheme is developed to a middle level of specificity by focusing on identification and design of major subsystems to the extent that their key geometric, component, and interactive properties are established .Basic subsystem interaction and design conflicts can thus be identified and resolved in the context of total-system objectives. Consultants can play a significant part in this effort; these preliminary-level decisions may also result in feedback that calls for refinement or even major change in schematic concepts.When the designer and the client are satisfied with the feasibility of a design proposal at the preliminary level, it means that the basic problems of overall design are solved and details are not likely to produce major change .The focus shifts again ,and the design process moves into the final level .At this stage the emphasiswill be on the detailed development of all subsystem specifics . Here the role of specialists from various fields, including structural engineering, is much larger, since all detail of the preliminary design must be worked out. Decisions made at this level may produce feedback into Level II that will result in changes. However, if Levels I and II are handled with insight, the relationship between the overall decisions, made at the schematic and preliminary levels, and the specifics of the final level should be such that gross redesign is not in question, Rather, the entire process should be one of moving in an evolutionary fashion from creation and refinement (or modification) of the more general properties of a total-system design concept, to the fleshing out of requisite elements and details.To summarize: At Level I, the architect must first establish, in conceptual terms, the overall space-form feasibility of basic schematic options. At this stage, collaboration with specialists can be helpful, but only if in the form of overall thinking. At Level II, the architect must be able to identify the major subsystem requirements implied by the scheme and substantial their interactive feasibility by approximating key component properties .That is, the properties of major subsystems need be worked out only in sufficient depth to very the inherent compatibility of their basic form-related and behavioral interaction . This will mean a somewhat more specificform of collaboration with specialists then that in level I .At level III ,the architect and the specific form of collaboration with specialists then that providing for all of the elemental design specifics required to produce biddable construction documents .Of course this success comes from the development of the Structural Material.The principal construction materials of earlier times were wood and masonry brick, stone, or tile, and similar materials. The courses or layers were bound together with mortar or bitumen, a tar like substance, or some other binding agent. The Greeks and Romans sometimes used iron rods or claps to strengthen their building. The columns of the Parthenon in Athens, for example, have holes drilled in them for iron bars that have now rusted away. The Romans also used a natural cement called puzzling, made from volcanic ash, that became as hard as stone under water.Both steel and cement, the two most important construction materials of modern times, were introduced in the nineteenth century. Steel, basically an alloy of iron and a small amount of carbon had been made up to that time by a laborious process that restricted it to such special uses as sword blades. After the invention of the Bessemer process in 1856, steel was available in large quantities at low prices. The enormous advantage of steel is its tensile forcewhich, as we have seen, tends to pull apart many materials. New alloys have further, which is a tendency for it to weaken as a result of continual changes in stress.Modern cement, called Portland cement, was invented in 1824. It is a mixture of limestone and clay, which is heated and then ground into a power. It is mixed at or near the construction site with sand, aggregate small stones, crushed rock, or gravel, and water to make concrete. Different proportions of the ingredients produce concrete with different strength and weight. Concrete is very versatile; it can be poured, pumped, or even sprayed into all kinds of shapes. And whereas steel has great tensile strength, concrete has great strength under compression. Thus, the two substances complement each other.They also complement each other in another way: they have almost the same rate of contraction and expansion. They therefore can work together in situations where both compression and tension are factors. Steel rods are embedded in concrete to make reinforced concrete in concrete beams or structures where tensions will develop. Concrete and steel also form such a strong bond─ the force that unites them─ that the steel cannot slip within the concrete. Still another advantage is that steel does not rust in concrete. Acid corrodes steel, whereas concrete has an alkaline chemical reaction, the opposite of acid.The adoption of structural steel and reinforced concrete caused major changes in traditional construction practices. It was no longer necessary to use thick walls of stone or brick for multistory buildings, and it became much simpler to build fire-resistant floors. Both these changes served to reduce the cost of construction. It also became possible to erect buildings with greater heights and longer spans.Since the weight of modern structures is carried by the steel or concrete frame, the walls do not support the building. They have become curtain walls, which keep out the weather and let in light. In the earlier steel or concrete frame building, the curtain walls were generally made of masonry; they had the solid look of bearing walls. Today, however, curtain walls are often made of lightweight materials such as glass, aluminum, or plastic, in various combinations.Another advance in steel construction is the method of fastening together the beams. For many years the standard method was riveting.A rivet is a bolt with a head that looks like a blunt screw without threads. It is heated, placed in holes through the pieces of steel, and a second head is formed at the other end by hammering it to hold it in place. Riveting has now largely been replaced by welding, the joining together of pieces of steel by melting a steel materialbetween them under high heat.Priestess’s concrete is an improved form of reinforcement. Steel rods are bent into the shapes to give them the necessary degree of tensile strengths. They are then used to priestess concrete, usually by one of two different methods. The first is to leave channels in a concrete beam that correspond to the shapes of the steel rods. When the rods are run through the channels, they are then bonded to the concrete by filling the channels with grout, a thin mortar or binding agent. In the other (and more common) method, the priestesses steel rods are placed in the lower part of a form that corresponds to the shape of the finished structure, and the concrete is poured around them. Priestess’s concrete uses less steel and less concrete. Because it is a highly desirable material.Progressed concrete has made it possible to develop buildings with unusual shapes, like some of the modern, sports arenas, with large spaces unbroken by any obstructing supports. The uses for this relatively new structural method are constantly being developed.建筑中的结构设计及建筑材料建筑师必须从一种全局的角度出发去处理建筑设计中应该考虑到的实用活动，物质及象征性的需求。

附录1 外文原文Introducing the Spring FrameworkThe Spring Framework: a popular open source application framework that addresses many of the issues outlined in this book. This chapter will introduce the basic ideas of Spring and dis-cuss the central “bean factory”lightweight Inversion-of-Control (IoC) container in detail.Spring makes it particularly easy to implement lightweight, yet extensible, J2EE archi-tectures. It provides an out-of-the-box implementation of the fundamental architectural building blocks we recommend. Spring provides a consistent way of structuring your applications, and provides numerous middle tier features that can make J2EE development significantly easier and more flexible than in traditional approaches.The basic motivations for Spring are:To address areas not well served by other frameworks. There are numerous good solutions to specific areas of J2EE infrastructure: web frameworks, persistence solutions, remoting tools, and so on. However, integrating these tools into a comprehensive architecture can involve significant effort, and can become a burden. Spring aims to provide an end-to-end solution, integrating spe-cialized frameworks into a coherent overall infrastructure. Spring also addresses some areas that other frameworks don’t. For example, few frameworks address generic transaction management, data access object implementation, and gluing all those things together into an application, while still allowing for best-of-breed choice in each area. Hence we term Spring an application framework, rather than a web framework, IoC or AOP framework, or even middle tier framework.To allow for easy adoption. A framework should be cleanly layered, allowing the use of indi-vidual features without imposing a whole world view on the application. Many Spring features, such as the JDBC abstraction layer or Hibernate integration, can be used in a library style or as part of the Spring end-to-end solution.To deliver ease of use. As we’ve noted, J2EE out of the box is relatively hard to use to solve many common problems. A good infrastructure framework should make simple tasks simple to achieve, without forcing tradeoffs for future complex requirements (like distributed transactions) on the application developer. It should allow developers to leverage J2EE services such as JTA where appropriate, but to avoid dependence on them in cases when they are unnecessarily complex.To make it easier to apply best practices. Spring aims to reduce the cost of adhering to best practices such as programming to interfaces, rather than classes, almost to zero. However, it leaves the choice of architectural style to the developer.Non-invasiveness. Application objects should have minimal dependence on the framework. If leveraging a specific Spring feature, an object should depend only on that particular feature, whether by implementing a callback interface or using the framework as a class library. IoC and AOP are the key enabling technologies for avoiding framework dependence.Consistent configuration. A good infrastructure framework should keep application configuration flexible and consistent, avoiding the need for custom singletons and factories. A single style should be applicable to all configuration needs, from the middle tier to web controllers.Ease of testing. Testing either whole applications or individual application classes in unit tests should be as easy as possible. Replacing resources or application objects with mock objects should be straightforward.To allow for extensibility. Because Spring is itself based on interfaces, rather than classes, it is easy to extend or customize it. Many Spring components use strategy interfaces, allowing easy customization.A Layered Application FrameworkChapter 6 introduced the Spring Framework as a lightweight container, competing with IoC containers such as PicoContainer. While the Spring lightweight container for JavaBeans is a core concept, this is just the foundation for a solution forall middleware layers.Basic Building Blockspring is a full-featured application framework that can be leveraged at many levels. It consists of multi-ple sub-frameworks that are fairly independent but still integrate closely into a one-stop shop, if desired. The key areas are:Bean factory. The Spring lightweight IoC container, capable of configuring and wiring up Java-Beans and most plain Java objects, removing the need for custom singletons and ad hoc configura-tion. Various out-of-the-box implementations include an XML-based bean factory. The lightweight IoC container and its Dependency Injection capabilities will be the main focus of this chapter.Application context. A Spring application context extends the bean factory concept by adding support for message sources and resource loading, and providing hooks into existing environ-ments. Various out-of-the-box implementations include standalone application contexts and an XML-based web application context.AOP framework. The Spring AOP framework provides AOP support for method interception on any class managed by a Spring lightweight container. It supports easy proxying of beans in a bean factory, seamlessly weaving in interceptors and other advice at runtime. Chapter 8 dis-cusses the Spring AOP framework in detail. The main use of the Spring AOP framework is to provide declarative enterprise services for POJOs.Auto-proxying. Spring provides a higher level of abstraction over the AOP framework and low-level services, which offers similar ease-of-use to .NET within a J2EE context. In particular, the provision of declarative enterprise services can be driven by source-level metadata.Transaction management. Spring provides a generic transaction management infrastructure, with pluggable transaction strategies (such as JTA and JDBC) and various means for demarcat-ing transactions in applications. Chapter 9 discusses its rationale and the power and flexibility that it offers.DAO abstraction. Spring defines a set of generic data access exceptions that canbe used for cre-ating generic DAO interfaces that throw meaningful exceptions independent of the underlying persistence mechanism. Chapter 10 illustrates the Spring support for DAOs in more detail, examining JDBC, JDO, and Hibernate as implementation strategies.JDBC support. Spring offers two levels of JDBC abstraction that significantly ease the effort of writing JDBC-based DAOs: the org.springframework.jdbc.core package (a template/callback approach) and the org.springframework.jdbc.object package (modeling RDBMS operations as reusable objects). Using the Spring JDBC packages can deliver much greater pro-ductivity and eliminate the potential for common errors such as leaked connections, compared with direct use of JDBC. The Spring JDBC abstraction integrates with the transaction and DAO abstractions.Integration with O/R mapping tools. Spring provides support classes for O/R Mapping tools like Hibernate, JDO, and iBATIS Database Layer to simplify resource setup, acquisition, and release, and to integrate with the overall transaction and DAO abstractions. These integration packages allow applications to dispense with custom ThreadLocal sessions and native transac-tion handling, regardless of the underlyingO/R mapping approach they work with.Web MVC framework. Spring provides a clean implementation of web MVC, consistent with the JavaBean configuration approach. The Spring web framework enables web controllers to be configured within an IoC container, eliminating the need to write any custom code to access business layer services. It provides a generic DispatcherServlet and out-of-the-box controller classes for command and form handling. Request-to-controller mapping, view resolution, locale resolution and other important services are all pluggable, making the framework highly extensi-ble. The web framework is designed to work not only with JSP, but with any view technology, such as Velocity—without the need for additional bridges. Chapter 13 discusses web tier design and the Spring web MVC framework in detail.Remoting support. Spring provides a thin abstraction layer for accessing remoteservices without hard-coded lookups, and for exposing Spring-managed application beans as remote services. Out-of-the-box support is included for RMI, Caucho’s Hessian and Burlap web service protocols, and WSDL Web Services via JAX-RPC. Chapter 11 discusses lightweight remoting.While Spring addresses areas as diverse as transaction management and web MVC, it uses a consistent approach everywhere. Once you have learned the basic configuration style, you will be able to apply it in many areas. Resources, middle tier objects, and web components are all set up using the same bean configuration mechanism. You can combine your entire configuration in one single bean definition file or split it by application modules or layers; the choice is up to you as the application developer. There is no need for diverse configuration files in a variety of formats, spread out across the application.Spring on J2EEAlthough many parts of Spring can be used in any kind of Java environment, it is primarily a J2EE application framework. For example, there are convenience classes for linking JNDI resources into a bean factory, such as JDBC DataSources and EJBs, and integration with JTA for distributed transaction management. In most cases, application objects do not need to work with J2EE APIs directly, improving reusability and meaning that there is no need to write verbose, hard-to-test, JNDI lookups.Thus Spring allows application code to seamlessly integrate into a J2EE environment without being unnecessarily tied to it. You can build upon J2EE services where it makes sense for your application, and choose lighter-weight solutions if there are no complex requirements. For example, you need to use JTA as transaction strategy only if you face distributed transaction requirements. For a single database, there are alternative strategies that do not depend on a J2EE container. Switching between those transac-tion strategies is merely a matter of configuration; Spring’s consistent abstraction avoids any need to change application code.Spring offers support for accessing EJBs. This is an important feature (andrelevant even in a book on “J2EE without EJB”) because the use of dynamic proxies as codeless client-side business delegates means that Spring can make using a local stateless session EJB an implementation-level, rather than a fundamen-tal architectural, choice. Thus if you want to use EJB, you can within a consistent architecture; however, you do not need to make EJB the cornerstone of your architecture. This Spring feature can make devel-oping EJB applications significantly faster, because there is no need to write custom code in service loca-tors or business delegates. Testing EJB client code is also much easier, because it only depends on the EJB’s Business Methods interface (which is not EJB-specific), not on JNDI or the EJB API.Spring also provides support for implementing EJBs, in the form of convenience superclasses for EJB implementation classes, which load a Spring lightweight container based on an environment variable specified in the ejb-jar.xml deployment descriptor. This is a powerful and convenient way of imple-menting SLSBs or MDBs that are facades for fine-grained POJOs: a best practice if you do choose to implement an EJB application. Using this Spring feature does not conflict with EJB in any way—it merely simplifies following good practice.Introducing the Spring FrameworkThe main aim of Spring is to make J2EE easier to use and promote good programming practice. It does not reinvent the wheel; thus you’ll find no logging packages in Spring, no connection pools, no distributed transaction coordinator. All these features are provided by other open source projects—such as Jakarta Commons Logging (which Spring uses for all its log output), Jakarta Commons DBCP (which can be used as local DataSource), and ObjectWeb JOTM (which can be used as transaction manager)—or by your J2EE application server. For the same reason, Spring doesn’t provide an O/R mapping layer: There are good solutions for this problem area, such as Hibernate and JDO.Spring does aim to make existing technologies easier to use. For example, although Spring is not in the business of low-level transaction coordination, it does provide an abstraction layer over JTA or any other transaction strategy. Spring is alsopopular as middle tier infrastructure for Hibernate, because it provides solutions to many common issues like SessionFactory setup, ThreadLocal sessions, and exception handling. With the Spring HibernateTemplate class, implementation methods of Hibernate DAOs can be reduced to one-liners while properly participating in transactions.The Spring Framework does not aim to replace J2EE middle tier services as a whole. It is an application framework that makes accessing low-level J2EE container ser-vices easier. Furthermore, it offers lightweight alternatives for certain J2EE services in some scenarios, such as a JDBC-based transaction strategy instead of JTA when just working with a single database. Essentially, Spring enables you to write appli-cations that scale down as well as up.Spring for Web ApplicationsA typical usage of Spring in a J2EE environment is to serve as backbone for the logical middle tier of a J2EE web application. Spring provides a web application context concept, a powerful lightweight IoC container that seamlessly adapts to a web environment: It can be accessed from any kind of web tier, whether Struts, WebWork, Tapestry, JSF, Spring web MVC, or a custom solution.The following code shows a typical example of such a web application context. In a typical Spring web app, an applicationContext.xml file will reside in theWEB-INF directory, containing bean defini-tions according to the “spring-beans”DTD. In such a bean definition XML file, business objects and resources are defined, for example, a “myDataSource”bean, a “myInventoryManager”bean, and a “myProductManager”bean. Spring takes care of their configuration, their wiring up, and their lifecycle.<beans><bean id=”myDataSource”class=”org.springframework.jdbc. datasource.DriverManagerDataSource”><property name=”driverClassName”> <value>com.mysql.jdbc.Driver</value></property> <property name=”url”><value>jdbc:mysql:myds</value></property></bean><bean id=”myInventoryManager”class=”ebusiness.DefaultInventoryManager”> <property name=”dataSource”><ref bean=”myDataSource”/> </property></bean><bean id=”myProductManager”class=”ebusiness.DefaultProductManager”><property name=”inventoryManager”><ref bean=”myInventoryManager”/> </property><property name=”retrieveCurrentStock”> <value>true</value></property></bean></beans>By default, all such beans have “singleton”scope: one instance per context. The “myInventoryManager”bean will automatically be wired up with the defined DataSource, while “myProductManager”will in turn receive a reference to the “myInventoryManager”bean. Those objects (traditionally called “beans”in Spring terminology) need to expose only the corresponding bean properties or constructor arguments (as you’ll see later in this chapter); they do not have to perform any custom lookups.A root web application context will be loaded by a ContextLoaderListener that is defined in web.xml as follows:<web-app><listener> <listener-class>org.springframework.web.context.ContextLoaderListener </listener-class></listener>...</web-app>After initialization of the web app, the root web application context will beavailable as a ServletContext attribute to the whole web application, in the usual manner. It can be retrieved from there easily via fetching the corresponding attribute, or via a convenience method in org.springframework.web.context.support.WebApplicationContextUtils. This means that the application context will be available in any web resource with access to the ServletContext, like a Servlet, Filter, JSP, or Struts Action, as follows:WebApplicationContext wac = WebApplicationContextUtils.getWebApplicationContext(servletContext);The Spring web MVC framework allows web controllers to be defined as JavaBeans in child application contexts, one per dispatcher servlet. Such controllers can express dependencies on beans in the root application context via simple bean references. Therefore, typical Spring web MVC applications never need to perform a manual lookup of an application context or bean factory, or do any other form of lookup.Neither do other client objects that are managed by an application context themselves: They can receive collaborating objects as bean references.The Core Bean FactoryIn the previous section, we have seen a typical usage of the Spring IoC container in a web environment: The provided convenience classes allow for seamless integration without having to worry about low-level container details. Nevertheless, it does help to look at the inner workings to understand how Spring manages the container. Therefore, we will now look at the Spring bean container in more detail, starting at the lowest building block: the bean factory. Later, we’ll continue with resource setup and details on the application context concept.One of the main incentives for a lightweight container is to dispense with the multitude of custom facto-ries and singletons often found in J2EE applications. The Spring bean factory provides one consistent way to set up any number of application objects, whether coarse-grained components or fine-grained busi-ness objects. Applying reflection and Dependency Injection, the bean factory can host components that do not need to be aware of Spring at all. Hence we call Spring a non-invasiveapplication framework.Fundamental InterfacesThe fundamental lightweight container interface isorg.springframework.beans.factory.Bean Factory. This is a simple interface, which is easy to implement directly in the unlikely case that none of the implementations provided with Spring suffices. The BeanFactory interface offers two getBean() methods for looking up bean instances by String name, with the option to check for a required type (and throw an exception if there is a type mismatch).public interface BeanFactory {Object getBean(String name) throws BeansException;Object getBean(String name, Class requiredType) throws BeansException;boolean containsBean(String name);boolean isSingleton(String name) throws NoSuchBeanDefinitionException;String[] getAliases(String name) throws NoSuchBeanDefinitionException;}The isSingleton() method allows calling code to check whether the specified name represents a sin-gleton or prototype bean definition. In the case of a singleton bean, all calls to the getBean() method will return the same object instance. In the case of a prototype bean, each call to getBean() returns an inde-pendent object instance, configured identically.The getAliases() method will return alias names defined for the given bean name, if any. This mecha-nism is used to provide more descriptive alternative names for beans than are permitted in certain bean factory storage representations, such as XML id attributes.The methods in most BeanFactory implementations are aware of a hierarchy that the implementation may be part of. If a bean is not found in the current factory, the parent factory will be asked, up until the root factory. From the point of view of a caller, all factories in such a hierarchy will appear to be merged into one. Bean definitions in ancestor contexts are visible to descendant contexts, but not the reverse.All exceptions thrown by the BeanFactory interface and sub-interfaces extend org.springframework. beans.BeansException, and are unchecked. This reflects the fact that low-level configuration prob-lems are not usually recoverable: Hence, application developers can choose to write code to recover from such failures if they wish to, but should not be forced to write code in the majority of cases where config-uration failure is fatal.Most implementations of the BeanFactory interface do not merely provide a registry of objects by name; they provide rich support for configuring those objects using IoC. For example, they manage dependen-cies between managed objects, as well as simple properties. In the next section, we’ll look at how such configuration can be expressed in a simple and intuitive XML structure.The sub-interface org.springframework.beans.factory.ListableBeanFactory supports listing beans in a factory. It provides methods to retrieve the number of beans defined, the names of all beans, and the names of beans that are instances of a given type:public interface ListableBeanFactory extends BeanFactory {int getBeanDefinitionCount();String[] getBeanDefinitionNames();String[] getBeanDefinitionNames(Class type);boolean containsBeanDefinition(String name);Map getBeansOfType(Class type, boolean includePrototypes,boolean includeFactoryBeans) throws BeansException}The ability to obtain such information about the objects managed by a ListableBeanFactory can be used to implement objects that work with a set of other objects known only at runtime.In contrast to the BeanFactory interface, the methods in ListableBeanFactory apply to the current factory instance and do not take account of a hierarchy that the factory may be part of. The org.spring framework.beans.factory.BeanFactoryUtils class provides analogous methods that traverse an entire factory hierarchy.There are various ways to leverage a Spring bean factory, ranging from simple bean configuration to J2EE resource integration and AOP proxy generation. The bean factory is the central, consistent way of setting up any kind of application objects in Spring, whether DAOs, business objects, or web controllers. Note that application objects seldom need to work with the BeanFactory interface directly, but are usu-ally configured and wired by a factory without the need for any Spring-specific code.For standalone usage, the Spring distribution provides a tiny spring-core.jar file that can be embed-ded in any kind of application. Its only third-party dependency beyond J2SE 1.3 (plus JAXP for XML parsing) is the Jakarta Commons Logging API.The bean factory is the core of Spring and the foundation for many other services that the framework offers. Nevertheless, the bean factory can easily be usedstan-dalone if no other Spring services are required.附录2 中文译文Spring框架介绍Spring框架：这是一个流行的开源应用框架，它可以解决很多问题。

毕业设计（论文）外文文献翻译文献、资料中文题目：MVC设计模式文献、资料英文题目：THE MVC-WEB DESIGN PATTERN文献、资料来源：文献、资料发表（出版）日期：院（部）：专业：班级：姓名：学号：指导教师：翻译日期： 2017.02.14MVC设计模式Ralph F. Grove计算机科学，詹姆斯麦迪逊大学，哈里森堡，美国弗吉尼亚州***************Eray Ozkan计算机科学，詹姆斯麦迪逊大学，哈里森堡，美国弗吉尼亚州*****************关键字：web，web框架，设计模式，模型-视图-控制器模式摘要：模型-视图-控制器模式被引用为许多web开发框架的基础架构。

然而，用于web开发的MVC 版本随着原来的Smalltalk的MVC的演变而发生了一些改变。

本文介绍了对这些变化的分析，并提出了一种独立的Web-MVC模式，用于更准确的描述MVC是如何在web框架中实现的。

1.介绍模型-视图-控制器(Modle-View-Controller，MVC)设计模式被一些web应用框架作为基础架构，例如，Rails，以及Struts。

MVC最初是在施乐帕克研究中心(Goldberg和Robson，1985)开发的Smalltalk编程环境中实现的。

为了适应web框架，MVC已经演变成了另一种方式，最终成为一种不同于其他任何设计模式，也与原始的Smaltalk完全不同的模式的实现。

本文的第一个目标是介绍MVC设计模式，其中包括它的原始形态(第2节)以及现代众所周知的用于web应用框架的变更后的形态(第3节)。

第二个目标是对这个模式演变后发生的变化进行评估，同时呈现演变后版本的有效性(第3节)。

最后，我们提出了一个标准的MVC-Web设计模式的描述，用于反映目前在web框架中模式的使用，同时又能保持原始的MVC中令人满意的特性。

基于MVC的web应用框架的修订版本已经被提出了(Chun, Yanhua, 和Hanhong, 2003) (Barrett和Delaney, 2004)。

毕业设计附件外文文献翻译：原文+译文文献出处：Andrew G. The study of Harvard analysis framework and corporate financial analysis. American Journal of sociology, 2016, 2(4): 283-301.原文The study of Harvard analysis framework and corporate financial analysisAndrew GAbstractAn effective financial analysis framework should not only learn how to use accounting data, and be good at using the accounting data. Enterprises to implement its business strategy are based on the accounting data, and ignore the enterprise environment and strategic analysis. Thus, to a more comprehensive understanding of enterprise operating performance, but also extends the traditional financial analysis object by the financial statements for the entire financial report and related institutional environment, build a new financial analysis framework is more and more necessary.New analysis framework should be more with strategic vision, focus on the development strategy of the enterprise, takes the enterprise's competitive position, USES the method of management related problem analysis, financial statement analysis and analysis of organic combination of enterprise development strategy, analysis of enterprise internal and external management environment, combined with the overall development of the enterprise strategic and long-term interests, analyze the content of the more widely and more wide, to the enterprise management decision making will be more valuable. Harvard analysis framework and harvard analysis framework arises at the historic moment, standing in a strategic point of view, is not limited to the company's financial statements, to analyze the opportunities and threats from external environment, and the enterprise internal strengths and weaknesses, the analysis of financial situation improved prediction is scientific, pointed out the direction of future development for the enterprise.Keywords: Harvard analysis framework, the electric power enterprise, strategy, financial analysis1 IntroductionThe development needs of an enterprise financial analysis for its help, financial analysis has attracted the attention of the enterprise, experts and scholars are also constantly explore the solution to the financial analysis, financial analysis framework of research in recent years, more and more. Harvard analysis is the sublimation of traditional financial analysis, the framework from the management strategy of enterprises, analyzes the financial data of the enterprise, accounting analysis, find out enterprise possible false results, and then adopt some methods to improve the quality of accounting information, and on the basis of financial analysis, realistic analysis of the results, and then forecast the prospect of the enterprise. The traditional financial analysis framework is in the long-term practice of financial analysis and theoretical summary and form, it is main analysis object with financial statements, although joined the financial comprehensive analysis model or system, but still with quantitative analysis as the basic characteristics of neglect or some important financial information cannot be effectively incorporated into the analysis framework. Traditional analysis framework is mainly analysis enterprise's financial statements, is basically a state of "report on report". And commonly used analysis methods mainly include ratio analysis, comparative analysis, trend analysis and DuPont financial analysis system, etc., mainly through the calculation and comparison of the financial statement data, draw the corresponding index data, then the results of comparative analysis and factor analysis, heavy "quantity" is not "quality", the lack of the nature of the analysis of a problem. Traditional analysis, with emphasis on the internal situation, the main process flows of the enterprise, asset utilization ability, debt paying ability, profitability analysis, and ignore the external business environment. And analysis based on financial statements and financial statements is a summary of the business in the past, and this analysis has the obvious lag. The traditional financial analysis framework to analyze the data on the enterprise accounting statements cannot havesatisfied the needs of the development of enterprises now.2 Literature reviewCommon methods of financial analysis can be summarized as three kinds: DuPont financial analysis method, economic value added and balanced scorecard method. DuPont financial analysis method the enterprise net assets yield level decomposition to the product of a number of financial ratios, by using the inner relationship between financial indicators, comprehensive management of the enterprise financial management system and the economic benefit of this evaluation. It can help enterprise management more clearly see the determinants of return on net assets, and the sales net profit margin and total asset turnover, the correlation relationship between the debt ratio, provides a clear overview to management whether the company assets management efficiency and maximize shareholder returns roadmap. Economic value added theory init ially by Merton miller and Franco’s dial, two famous economists put forward. Later in the United States, tang, consulting company realized that this method is to evaluate the value of the company a good method, so the company will set up the method to promote worldwide. Economic value added is the company's operating profit after tax and the difference between the costs of capital; it takes into account the opportunity cost of capital economic profits, rather than accounting profit. It will force the company decision-makers high attention to the cost of capital. Put forward by Robert Kaplan, the balanced scorecard, which is based on enterprise strategy as the guidance, through finance, customer, operations and staff from four aspects and performance indicators of cause and effect, comprehensive management and the enterprise integrated performance evaluation system. Because of its advanced and has a certain reliability, so has been the favor of some companies. This kind of evaluation method to evaluate the quality of people to have certain request, because the choice of evaluation index need to refer to the company all aspects of characteristics, in order to fully reflect the company's financial position and operating results.In this increasingly mature, on the basis of financial analysis methods, scholars began to pay attention to these methods can be incorporated into a complete financialanalysis system, in order to form a frame structure, support for the enterprise economic operation.ErichHelford analysis framework is divided into introduction, operation analysis, investment analysis, financing analysis, value analysis several part. Summarizes the enterprise system, decision background and its relationship with financial statements and analysis tools, discussed including investment analysis, capital cost and financing options, and stock and enterprise value assessment, etc.Elisha based on the traditional financial analysis framework, which based on the analysis of enterprise debt paying ability, assets operation ability, profit ability and development ability, added into some of the industry analysis and the analysis of competition strategy. It includes business strategy analysis, accounting analysis, financial statement analysis and prospect analysis of four parts.The main points of the frame is in the business strategy analysis under the premise of accounting analysis, financial analysis and prospect analysis, shows that it is in a macro view more open order detail analysis, not only do detail analysis. Clyde P to financial analysis framework is divided into three parts, the first part of the financial accounting environment, the analysis of the data and the relationship between the enterprises the main activities, etc;The second part of accounting analysis, from the generally accepted accounting principles, analysis the connotation of the accounting item and quality; The third part of financial analysis, namely from the profitability, risk, prediction and evaluation of enterprise financial position and operating results are analyzed.3 Harvard theory analysis frameworks3.1 Strategic analysisStrategic analysis is the logical starting point of financial statement analysis, is also a Harvard analysis framework and other different parts of the financial analysis. Financial statement analysis is through the strategy analysis to the business activities of enterprises qualitative analysis of its economic significance, but also to accounting analysis and financial analysis for providing realistic background. Its main from the industry analysis and competitive strategy analysis of the two sides is analyzed. Can make use of porter five analysis, industry analysis to analyze the profitability of theindustry, by analyzing the existing and potential competitiveness, and negotiation ability, in the buying and selling market for investors to the data analysis of the industry has an overall grasp. Through the analysis of the industry development stage, the industry technological change speed, the product difference and integration, the buyer the seller number and relative size, industry market boundaries, total market and growth prospects, such as analysis, can see the nature of the industry and its status and role in the national economy. Sometimes, according to the characteristics of different industry life cycle for analysis. Must analysis the enterprise competition strategy analysis the characteristics of the industry and competitiveness problems. Choose attractive strong industry is part of business success, however, the real key to the success or failure of the enterprise is the enterprise the selected cost leadership strategy or differentiation strategy enforcement of whether to make a difference. Cost advantages including at a lower cost to provide the same product or service ability, a large number of mass production scale, production efficiency, etc.Difference advantage to supply a unique product or service cost is lower than the price, consumers preferred to buy a better product quality, more product variety, better customer service, etc.3.2 Accounting analysisAccounting analysis aims to evaluate financial statement disclosure of accounting information to the enterprise actual reflect the degree of operating conditions. Through the evaluation of enterprise accounting policies and accounting estimates whether appropriate, can assess the enterprise accounting information distortion degree. Through the analysis of the notes to financial statements, understand accounting statements behind digital detailed composition and not reflected in the information on accounting statements, by analyzing industry transverse and longitudinal analysis of the enterprise financial data that may exist in the water, and then to certain adjustment of financial data, and according to the adjusted data to the financial statements, so that they can more accurately grasp the enterprise the management condition. Accounting analysis steps in turn have to identify the key accounting policies, evaluating accounting flexibility, evaluationstrategy, accounting disclosure quality evaluation, recognize danger signals and finally eliminate the distortion of accounting information. Accounting analysis method can have the audit report to analysis, abnormal profit excluding method, cash flow analysis, related party transactions rejecting method eliminating method and the virtual assets.3.3 Financial analysisThe main content of financial analysis is to enterprise's debt paying ability, operation ability, and profit ability; create cash flow capacity using the method of financial ratio analysis and cash flow analysis to analysis and research. Is the purpose of financial analysis using the financial data to evaluate the performance of enterprise at present and the past, in order to better know and enterprise strategy is linked to performance. Ratio analysis is mainly used to evaluate the enterprise product market performance and financial policy. Cash flow analysis is mainly used to evaluate enterprise asset liquidity and financial flexibility. Analyze the corporate profitability and growth is one of the major problems of financial statement analysis and evaluation. Through the analysis of the problem can be used to develop product strategy and financial strategies. Product strategy, operation and management, including analysis of revenues and expenses management, working capital and the management of fixed assets investment management. Management of finance strategy including the analysis of debt and equity structure of financing strategy, dividend payments and profit distribution of dividend policy. Conduct financial analysis and accounting information distortion phenomenon is more common, so the Harvard analysis under the framework of financial analysis are not independent accounting data, but according to the result of step in the accounting analysis, namely the financial statements of the enterprise artificial out financial analysis, and the related parameters of the accounting statements and peer enterprises horizontal comparison, and analysis enterprise's position in the industry and its realistic situation.译文哈佛分析框架与企业财务分析研究Andrew G摘要一个有效地财务分析框架不仅要学习如何使用会计数据，而且要善于运用非会计数据。

建筑学Modern-Architecture现代建筑⼤学毕业论⽂外⽂⽂献翻译及原⽂毕业设计（论⽂）外⽂⽂献翻译⽂献、资料中⽂题⽬：现代建筑⽂献、资料英⽂题⽬：Modern Architecture⽂献、资料来源：⽂献、资料发表（出版）⽇期：院（部）：专业：班级：姓名：学号：指导教师：翻译⽇期： 2017.02.14建筑学毕业设计的外⽂⽂献及译⽂⽂献、资料题⽬：《Advanced Encryption Standard》⽂献、资料发表（出版）⽇期：2004.10.25外⽂⽂献：Modern ArchitectureModern architecture, not to be confused with 'contemporary architecture', is a term given to a number of building styles with similar characteristics, primarily the simplification of form and the elimination of ornament. While the style was conceived early in the 20th century and heavily promoted by a few architects, architectural educators and exhibits, very few Modern buildings were built in the first half of the century. For three decades after the Second World War, however, it became the dominant architectural style for institutional and corporate building.1. OriginsSome historians see the evolution of Modern architecture as a social matter, closely tied to the project of Modernity and hence to the Enlightenment, a result of social and political revolutions.Others see Modern architecture as primarily driven by technological and engineering developments, and it is true that the availability of new building materials such as iron, steel, concrete and glass drove the invention of new building techniques as part of the Industrial Revolution. In 1796, Shrewsbury mill owner Charles Bage first used his ‘fireproof’ design, which relied on cast iron and brick with flag stone floors. Such construction greatly strengthened the structure of mills, which enabled them to accommodate much bigger machines. Due to poor knowledge of iron's properties as a construction material, a number of early mills collapsed. It was not until the early 1830s that Eaton Hodgkinson introduced the section beam, leading to widespread use of iron construction, this kind of austere industrial architecture utterly transformed the landscape of northern Britain, leading to the description, "Dark satanic mills" of places like Manchester and parts of West Yorkshire. The Crystal Palace by Joseph Paxton at the Great Exhibition of 1851 was an early example of iron and glass construction; possibly the best example is the development of the tall steel skyscraper in Chicago around 1890 by William Le Baron Jenney and Louis Sullivan. Early structures to employ concrete as the chief means of architectural expression (rather than for purely utilitarian structure) include Frank Lloyd Wright's Unity Temple, built in 1906 near Chicago, and Rudolf Steiner's Second Goetheanum, built from1926 near Basel, Switzerland.Other historians regard Modernism as a matter of taste, a reaction against eclecticism and the lavish stylistic excesses of Victorian Era and Edwardian Art Nouveau.Whatever the cause, around 1900 a number of architects around the world began developing new architectural solutions to integrate traditional precedents (Gothic, for instance) with new technological possibilities. The work of Louis Sullivan and Frank Lloyd Wright in Chicago, Victor Horta in Brussels, Antoni Gaudi in Barcelona, Otto Wagner in Vienna and Charles Rennie Mackintosh in Glasgow, among many others, can be seen as a common struggle between old and new.2. Modernism as Dominant StyleBy the 1920s the most important figures in Modern architecture had established their reputations. The big three are commonly recognized as Le Corbusier in France, and Ludwig Mies van der Rohe and Walter Gropius in Germany. Mies van der Rohe and Gropius were both directors of the Bauhaus, one of a number of European schools and associations concerned with reconciling craft tradition and industrial technology.Frank Lloyd Wright's career parallels and influences the work of the European modernists, particularly via the Wasmuth Portfolio, but he refused to be categorized with them. Wright was a major influence on both Gropius and van der Rohe, however, as well as on the whole of organic architecture.In 1932 came the important MOMA exhibition, the International Exhibition of Modern Architecture, curated by Philip Johnson. Johnson and collaborator Henry-Russell Hitchcock drew together many distinct threads and trends, identified them as stylistically similar and having a common purpose, and consolidated them into the International Style.This was an important turning point. With World War II the important figures of the Bauhaus fled to the United States, to Chicago, to the Harvard Graduate School of Design, and to Black Mountain College. While Modern architectural design never became a dominant style in single-dwelling residential buildings, in institutional and commercial architecture Modernism became the pre-eminent, and in the schools (for leaders of the profession) the only acceptable, design solution from about 1932 to about 1984.Architects who worked in the international style wanted to break with architectural tradition and design simple, unornamented buildings. The most commonly used materials are glass for the facade, steel for exterior support, and concrete for the floors and interior supports; floor plans were functional and logical. The style became most evident in the design of skyscrapers. Perhaps its most famous manifestations include the United Nations headquarters (Le Corbusier, Oscar Niemeyer, Sir Howard Robertson), the Seagram Building (Ludwig Mies van der Rohe), and Lever House (Skidmore, Owings, and Merrill), all in New York. A prominent residential example is the Lovell House (Richard Neutra) in Los Angeles.Detractors of the international style claim that its stark, uncompromisingly rectangular geometry is dehumanising. Le Corbusier once described buildings as "machines for living", but people are not machines and it was suggested that they do not want to live in machines. Even Philip Johnson admitted he was "bored with the box." Since the early 1980s many architects have deliberately sought to move away from rectilinear designs, towards more eclectic styles. During the middle of the century, some architects began experimenting in organic forms that they felt were more human and accessible. Mid-century modernism, or organic modernism, was very popular, due to its democratic and playful nature. Alvar Aalto and Eero Saarinen were two of the most prolific architects and designers in this movement, which has influenced contemporary modernism.Although there is debate as to when and why the decline of the modern movement occurred, criticism of Modern architecture began in the 1960s on the grounds that it was universal, sterile, elitist and lacked meaning. Its approach had become ossified in a "style" that threatened to degenerate into a set of mannerisms. Siegfried Giedion in the 1961 introduction to his evolving text, Space, Time and Architecture (first written in 1941), could begin "At the moment a certain confusion exists in contemporary architecture, as in painting; a kind of pause, even a kind of exhaustion." At the Metropolitan Museum of Art, a 1961 symposium discussed the question "Modern Architecture: Death or Metamorphosis?" In New York, the coup d'état appeared to materialize in controversy around the Pan Am Building that loomed over Grand Central Station, taking advantage of the modernist real estate concept of "air rights",[1] In criticism by Ada Louise Huxtable and Douglas Haskell it was seen to "sever" the Park Avenue streetscape and "tarnish" the reputations of its consortium of architects: Walter Gropius, Pietro Belluschi and thebuilders Emery Roth & Sons. The rise of postmodernism was attributed to disenchantment with Modern architecture. By the 1980s, postmodern architecture appeared triumphant over modernism, including the temple of the Light of the World, a futuristic design for its time Guadalajara Jalisco La Luz del Mundo Sede International; however, postmodern aesthetics lacked traction and by the mid-1990s, a neo-modern (or hypermodern) architecture had once again established international pre-eminence. As part of this revival, much of the criticism of the modernists has been revisited, refuted, and re-evaluated; and a modernistic idiom once again dominates in institutional and commercial contemporary practice, but must now compete with the revival of traditional architectural design in commercial and institutional architecture; residential design continues to be dominated by a traditional aesthetic.中⽂译⽂：现代建筑现代建筑,不被混淆与'当代建筑' , 是⼀个词给了⼀些建筑风格有类似的特点, 主要的简化形式,消除装饰等. 虽然风格的设想早在20世纪,并⼤量造就了⼀些建筑师、建筑教育家和展品,很少有现代的建筑物,建于20世纪上半叶. 第⼆次⼤战后的三⼗年, 但最终却成为主导建筑风格的机构和公司建设.1起源⼀些历史学家认为进化的现代建筑作为⼀个社会问题, 息息相关的⼯程中的现代性,从⽽影响了启蒙运动,导致社会和政治⾰命.另⼀些⼈认为现代建筑主要是靠技术和⼯程学的发展, 那就是获得新的建筑材料,如钢铁, 混凝⼟和玻璃驱车发明新的建筑技术,它作为⼯业⾰命的⼀部分. 1796年, shrewsbury查尔斯bage⾸先⽤他的'⽕'的设计, 后者则依靠铸铁及砖与⽯材地板. 这些建设⼤⼤加强了结构,使它们能够容纳更⼤的机器. 由于作为建筑材料特性知识缺乏,⼀些早期建筑失败. 直到1830年初,伊顿Hodgkinson预计推出了型钢梁, 导致⼴泛使⽤钢架建设，⼯业结构完全改变了这种窘迫的⾯貌,英国北部领导的描述, "⿊暗魔⿁作坊"的地⽅如曼彻斯特和西约克郡. ⽔晶宫由约瑟夫paxton的重⼤展览, 1851年,是⼀个早期的例⼦,钢铁及玻璃施⼯; 可能是⼀个最好的例⼦,就是1890年由William乐男爵延长和路易沙利⽂在芝加哥附近发展的⾼层钢结构摩天楼. 早期结构采⽤混凝⼟作为⾏政⼿段的建筑表达(⽽⾮纯粹功利结构) ,包括建于1906年在芝加哥附近,劳埃德赖特的统⼀宫, 建于1926年瑞⼠巴塞尔附近的鲁道夫斯坦纳的第⼆哥特堂,.但⽆论原因为何, 约有1900多位建筑师,在世界各地开始制定新的建筑⽅法,将传统的先例(⽐如哥特式)与新的技术相结合的可能性.路易沙利⽂和赖特在芝加哥⼯作,维克多奥尔塔在布鲁塞尔,安东尼⾼迪在巴塞罗那, 奥托⽡格纳和查尔斯景mackintosh格拉斯哥在维也纳,其中之⼀可以看作是⼀个新与旧的共同⽃争.2现代主义风格由1920年代的最重要⼈物,在现代建筑⾥确⽴了⾃⼰的名声. 三个是公认的柯布西耶在法国, 密斯范德尔德罗和⽡尔特格罗⽪乌斯在德国. 密斯范德尔德罗和格罗⽪乌斯为董事的包豪斯, 其中欧洲有不少学校和有关团体学习调和⼯艺和传统⼯业技术.赖特的建筑⽣涯中,也影响了欧洲建筑的现代艺术,特别是通过⽡斯穆特组合但他拒绝被归类与他们. 赖特与格罗⽪乌斯和Van der德罗对整个有机体系有重⼤的影响.在1932年来到的重要moma展览,是现代建筑艺术的国际展览,艺术家菲利普约翰逊. 约翰逊和合作者亨利-罗素阁纠集许多鲜明的线索和趋势, 内容相似,有⼀个共同的⽬的,巩固了他们融⼊国际化风格这是⼀个重要的转折点. 在⼆战的时间包豪斯的代表⼈物逃到美国,芝加哥，到哈佛⼤学设计⿊⼭书院. 当现代建筑设计从未成为主导风格单⼀的住宅楼，在成为现代卓越的体制和商业建筑, 是学校(专业领导)的唯⼀可接受的, 设计解决⽅案,从约1932年⾄约1984年.那些从事国际风格的建筑师想要打破传统建筑和简单的没有装饰的建筑物。

（Sheaｒ waｌl ｓt ｒuctural desigｎ ofh ｉgh-ｌev ｅl fr ａmeworkＷｕ Jiche ｎgＡbstract ： In t ｈis pape ｒ the basic c ｏｎcepts of ｍａn ｐow ｅr ｆｒom th ｅ ｆra ｍｅ sh ｅａr w ａｌl str ｕc ｔｕｒｅ, analy ｓis of the ｓtruct ｕr ａｌ des ｉgn ｏf th ｅ c ｏnt ｅnt ｏｆ t ｈe fr ａme she ａr wall, in ｃｌudi ｎg the ｓeism ｉc wa ｌl she ａr spa本科毕业设计外文文献翻译学校代码： 10128学 号：题 目：Shear wall structural design of high-level framework 学生姓名： 学 院：土木工程学院 系 别：建筑工程系 专 业：土木工程专业（建筑工程方向） 班 级：土木08-（5）班 指导教师： (副教授)ｎratiｏdesign, ａnd a concrｅtｅｓtruｃtuｒe in thｅmｏst co ｍmonｌy useｄframe shear walｌstｒｕcturｅtｈｅdesign of p ｏiｎｔs to note.Keyworｄs: cｏncrｅｔｅ; fｒaｍｅshｅａｒwall sｔｒucｔｕre；hiｇh－risｅbuildｉｎｇsThe wall is aｍoｄern high－rｉｓe buiｌdiｎgs is an iｍpo ｒｔant buiｌdinｇconｔｅnt, the ｓize of thｅfraｍe sheａr wall must comｐly with buildｉng reguｌａtｉons. The pｒｉnｃipｌe is ｔhat the largeｒsｉzｅbｕt the thｉｃknessｍuｓt ｂｅsmaller gｅoｍetric featｕrｅｓshoｕlｄｂe ｐｒeｓented ｔo the pｌatｅ,ｔｈe forｃe is close to cylｉndrｉcal.Ｔhe waｌl sｈｅar wa ｌl strｕｃｔure ｉs a flaｔcomｐonent. Itｓeｘposure to tｈe force aｌoｎg ｔhe ｐlane leｖｅl of theｒole ofｓｈear and momｅｎt, must also take ｉｎtｏａccounｔthe veｒｔical preｓsure.Opeｒate unｄer thｅcomｂiｎed actｉｏn oｆbenｄing momeｎts and axial force aｎｄsheａr forcｅbｙthe caｎtilｅｖｅr deep beａm uｎder ｔｈe acｔion of the force leveｌｔo lｏo ｋinto ｔｈe bottom mouｎted on ｔhe basｉs of. Sheaｒｗaｌl ｉｓdiｖidｅｄinｔo a whole walｌand ｔheａssoｃiated ｓｈeａr wall in thｅactual project,a wholｅwａlｌfor ｅxａmpl ｅ, suｃh as ｇenｅraｌhｏusiｎｇｃonstｒuction in tｈe gablｅｏr fish bｏne strｕcture ｆｉlｍwａｌls ａnd small opｅningｓwall.Cｏupled Sｈeａr ｗalls are ｃonnｅcted bｙｔhｅcｏupｌing ｂeam shｅａr wall.Buｔｂecause tｈeｇｅnerａlｃｏupling beaｍstｉｆfness is less thaｎｔhe wall stiｆfnｅsｓof the lｉmbs，ｓｏ. Wａlｌliｍb aｌonｅis obviｏus.The ｃｅntral beam of tｈeｉnflｅｃtion pｏｉnｔtｏpay aｔtenｔiｏｎto tｈeｗaｌl pressｕre thａn the limiｔs of the lｉmb axis. Will forｍa shortｗiｄe beａms，widｅcolｕmn wａll liｍｂｓhear wａll ｏpｅnings toｏlarge ｃomｐonｅnt aｔbothｅn ｄs ｗith jｕst the domain of vａｒiabｌe crosｓ－ｓecｔｉon ro ｄin ｔhe intｅrｎａｌforcｅｓｕnder tｈｅaｃtioｎof maｎy Ｗalｌlｉmb iｎflｅcｔion point Ｔhｅｒeｆoｒe, ｔhe cａｌcula ｔions ａｎd consｔruction sｈouldAccordinｇtｏappｒoxiｍａｔe tｈe framｅstｒucｔure to ｃonsideｒ.Tｈe desｉｇｎof ｓhｅａr walls ｓhoulｄbe based on the cｈａractｅrisｔics ｏf ａvａｒｉｅty oｆwall itseｌｆ,ａnd dｉfferｅnｔmeｃhanical ch ａrａcteｒisｔｉcｓand requireｍents,wall oｆthｅinternａｌforceｄistrｉbutｉon and failurｅmoｄｅs ｏf sｐecific and cｏmprehensive ｃonｓideration of the design rｅinｆorcemｅnt aｎd stｒuctural measｕres. Ｆrame sｈear wall ｓｔrｕctuｒe deｓiｇn is to cｏｎsider the ｓtructｕre of the oｖerall ａnａｌysis for ｂoｔh dｉrecｔｉｏｎsｏｆthｅhｏrｉzontal and vｅrtiｃalｅfｆects. Oｂtain thｅinternal force ｉs reｑuirｅd in ａccｏrdancｅｗｉｔｈtｈe bias or paｒtｉal ｐull normal sｅcｔｉon forｃｅｃaｌculatiｏn.The waｌl strｕcture oｆtheｆｒame sｈear ｗall ｓｔructural dｅsign of ｔhe coｎtent frame hｉgh-rise buildings, in ｔhe actual ｐrｏjeｃｔiｎｔhｅuse of thｅｍoｓt seisｍic ｗａlls have suffiｃient quantitｉeｓto meｅt ｔheｌｉmitsｏf the lａyer displacement, the loｃation iｓｒelａtiｖely flexiblｅ. Seiｓmic wａll for cｏntinuous layout，ｆulｌ-length ｔhroｕgh．Should bｅdesigned to avoid the waｌl mutaｔioｎs ｉn limb ｌｅｎgth and alignment is noｔuｐａnd down the ｈolｅ. The samｅtｉme．Tｈe inｓide of ｔhe hole marginｓcｏlｕｍｎshｏｕld not ｂｅｌｅssｔhan３00mm ｉｎordｅｒtｏguaraｎteｅtheｌengtｈof the colｕｍn ａs the edgｅof tｈe coｍponent and constｒａiｎt eｄgｅcｏｍponeｎts．Thｅbi-direc ｔiｏnal laｔerａl forｃe ｒesiｓting strucｔurａl fｏrm of verticａl aｎｄhorｉzontaｌwalｌcoｎnected.Eａｃh ｏｔhｅr as ｔhe ａffiｎiｔｙof the shｅar wall. Ｆor ｏnｅ, two seismic frａme sｈe ａr ｗalｌｓ,ｅｖen beam highｒatio ｓhould noｔgreateｒthan 5 aｎd a height of nｏt less thaｎ400mm.Midline colｕmnａnd beａmｓ,wall ｍｉdline shouｌdｎoｔbe greaｔer tha ｎthe ｃoｌｕmｎwidｔｈof1/4，ｉn ordｅr ｔｏreｄuce thｅtoｒsional eｆfect of the sｅiｓmｉｃacｔion ｏnｔｈｅｃolｕmn．Oｔhｅrwｉsｅcan be taken tｏstrengthｅn theｓtirruprａｔｉo iｎｔhe cｏlｕmn tｏmake ｕp.If thｅshear wａｌl sheａｒsｐａn ｔhａnｔhe ｂig twｏ. Ｅveｎthe beａｍcro ｓs-heｉｇht ratiｏgreateｒthan 2.5, ｔhen tｈe design presｓｕｒe ｏf thｅｃｕt shoulｄnoｔmａkｅａｂig 0.2. Howevｅｒ, ｉf the sheａｒwallｓheａr sｐａｎｒatiｏof ｌess than two couｐlinｇｂeａms sｐan of ｌeｓs than ２．5, then the shear coｍｐres ｓiｏn rａｔiｏis noｔgreaｔer thａn 0.15. Thｅｏther haｎｄ，ｔhe bｏttom oｆthe fraｍe ｓhｅar walｌstructure ｔo enhａnce tｈｅdｅsign sｈould ｎoｔbe leｓs thaｎ２０0mmａnd noｔlesｓthaｎstorey 1/１6，othｅｒｐaｒtｓｓhｏulｄnot be lｅss than 160mm ａnd ｎｏt ｌｅss thaｎｓtoｒey １/20. Arounｄthe wall of the frame ｓhｅar ｗall strucｔure sｈｏulｄbe set ｔo the beａm or dark bｅamａnd the sｉｄe columｎｔｏform a borｄｅr. Ｈoｒizｏntａl ｄｉｓtrｉbuｔioｎoｆsｈear waｌls cａn from the sheａr effect，tｈｉs design wｈen ｂuilｄｉng higｈｅr longeｒor fｒaｍｅｓtructｕre reinfoｒcｅment shｏuld be aｐprｏpｒiatelｙincｒeａｓed, ｅspｅcｉａlｌy in the sｅnｓitivｅｐarts of the beam pｏsition ｏr teｍperaｔuｒe, stiffnｅsｓchａnge is besｔappｒopriatｅly increased, ｔｈeｎcｏnsidｅration sｈoulｄbe ｇｉveｎｔo the wａlｌvertｉcaｌreiｎforｃemeｎt,becaｕse ｉt is mａinly fｒom the bｅnding efｆecｔ, aｎｄtake in ｓome ｍｕlti-ｓtorｅｙshｅａｒｗａll structuｒereinforcｅｄreｉnｆorceｍent rate -likｅlｅsｓconｓtｒained edgｅｏｆｔhｅcomｐonent or components reinforｃemeｎt of thｅedge ｃomｐｏnent.Referｅnces: [1 sad Hａyaｓhi,He Yaming. Ｏn the shorｔshｅar ｗall ｈigh-riｓe bｕilｄinｇｄesign ［J]．Kｅｙｕaｎ, 2008, (O2).高层框架剪力墙结构设计吴继成摘要: 本文从框架剪力墙结构设计的基本概念人手, 分析了框架剪力墙的构造设计内容, 包括抗震墙、剪跨比等的设计, 并出混凝土结构中最常用的框架剪力墙结构设计的注意要点。

文献信息：文献标题：Frame Structure Anti-earthquake Design Way of Thinking （框架结构的抗震设计思路）国外作者：Theodore V.Galambos文献出处：《Journal of Constructional Concrete Research》,2000, 55:289-303 字数统计：英文4451单词，22990字符；中文5601汉字外文文献：Frame Structure Anti-earthquake Design Way of ThinkingAbstract Currently, the anti-earthquake norms all round the world almost adopt to a kind of way of thinking: The adoption presses the earthquake strong or weak of possible situation to divide the line earthquake cent area; According to everyplace the history occurrence of the area earthquake of covariance result or to geology structure of the history investigate to have to explicit statistics the meaning establish the sport peak in waterproof and quasi-ground value acceleration; Make use of again the reaction acceleration that the acceleration reaction composes different period; Get a design to use acceleration level through earthquake dint adjust met coefficient R. In the meantime, most nations all approve such point，establishing to defend the earthquake intensity level can take to use a different value, choosing to use to establish to defend the earthquake intensity level more and highly, the ductility request of the structure also more low, choose to use to establish to defend earthquake intensity level more and lowly, structure of ductility request more high. The structure ductility guarantee of precondition is the ductility of the member, pass again an effectively reasonable conjunction in adopting a series of measure guarantee member the foundation of the ductility, the structure system choice is reasonable in the meantime, the degree just distributes reasonable of under condition ability basic assurance structure of ductility.Keywords: frame structure; anti-earthquake design; design way of thinking1.Simple Review of Anti-earthquake Design Way of ThinkingThe development that constructs the structure anti- earthquake is along with people all the earthquake move with the structure characteristic of the understanding is continuously thorough but develop gradually, however, from is born up to now the history of a hundred years, have mostly several to develop a stage as follows:(1) Quiet dint stage: It first from a Japanese professor passed to harm to prognosticate the anti- earthquake design theories that put forward with the theories understanding at that time to the limited earthquake, being applicable to only just rigid body structure. It didn't think characteristic and the place difference to consider structure to the influence that constructs structure.(2) Respond the table stage: Along with vibrate to record of obtain and the development of the structure dynamics theories, the Biota professor of the United States put forward flexibility to respond the concept of the table in 1940, respond the table is list the freely flexible system, it was obtain of numerous earthquakes record of encourage, the structure period or respond of the relation, include the acceleration reaction table, the speed responded a table, moved to respond a table. It consider the motive characteristic of the structure, it still is the foundation that all countries norm design earthquake dint takes a value up to now. The calculation of the earthquake function dint usually use shears with the bottom and flaps a decomposition to respond a table a method, flapping a decomposition to respond a table a method of basic define: Suppose the building structure is the line flexibility more freedom degree system, making use principle of flap a decomposition and flap a type, it will solve a freedom degree the earthquake of the flexible system to respond to resolve for solve an independence of etc. the effect single freedom degree flexible system most the heavy earthquake respond. Then begging should in each function affect that flaps a type. At this time, according to consider the way dissimilarity of the earthquake function, adopt a different array, group method, order flexible system to many qualities of the flat surface vibration, it can use a SRSS method, it is according tosuppose the importation earthquake as steady random process, each of a flap reaction is independent mutually but deduce to get; For consider even-twists many qualities that the lotus connect to order flexible system, the adoption CQC method, it lies in with the main differentiation of the SRSS method: Suppose when flat surface vibrate each flap a type independent mutually, and each contribution that flap a type increased along with the frequency high but lower；But even-twist lotus connect hour each flap a frequency span very small, close together and higher flap the frequency of the type and may near to this relativity that will consider a dissimilarity to flap a very much, also have influence of turn round the weight and not necessarily increase along with the frequency high but lower, sometimes higher flap the influence possibility of the type big in lower flap the influence of the type, it will consider more influences that flap a type while comparing SRSS. The bottom shears the dint method in consideration of the special of the structure system to the simplification that flaps a decomposition to respond to compose a method, be the building height not big, took shearing to slice to transform as the lord and the quality to follow height to distribute more even structure with degree just, the structure vibration moved to respond usually with the first flapped a type for lord, and when the first flapped a type to near to in the straight line, can flap a decomposition method simplification to shear the dint method calculation formula for the basic bottom. The level earthquake function that each quality that this basic formula calculation get order can better reflection just degree bigger structure, but when structure the basic period was long, the place characteristic period to compare with hour, the calculation income coping earthquake function be partial to small. of course , the Anti-earthquake Norm provision, be the structure basic period more than 1.4 place characteristic period, at coping additional level earthquake function.(3)the motive theories stage: Along with move understanding and comprehend to the earthquake of deepen continuously, know to some shortage of the reaction table, such as to the earthquake move hold of influence consideration not week, and the exaltation of the calculator function, make the motive method develop gradually, its essence solves a square distance of motive directly, but because of earthquake theground sport acceleration is very irregular, it can't beg for differential calculus square distance, it shuts to match a solution, so adopt number integral calculus method more. Usual way of doing is carry on a continuous cent a segment a processing towards having already record of the earthquake wave, each data all see do the constant, then the function get to structure up, pass an equilibrium and square distance of motive to beg at the moment of the acceleration, speed, move reaction, moving with ex- the acceleration, speed, the segment to carry on folding to add immediately after folding the result for add as the beginning that descends at that time a segment to start a data, pushing according to this kind, end beg structure at the give for low week again and again the earthquake wave under of the acceleration, speed and move the dint reaction variety process.(4) At American Northridge earthquake in 1994 and Japanese Kobe earthquake in 1995 after, the beautiful day scholar put forward again according to the anti- earthquake design method of behavior, it was during the period of usage to make the building structure satisfy various requests that used function according to the basic thought of behavior. Tradition according to the design method dissimilarity of the dint, adjudicate to the structure function mainly is according to move standard, move index sign to come with the different to the structure function to carry on a different control. But descend structure because of the big earthquake of not- flexible transform hard and accurate estimate of, make to can stay around according to the design method of behavior theoretically. But put forward its aggressive meaning to have 2:00 at least:a. Emphasize the system and the society of the earthquake engineering;b. The part that knows an original anti- earthquake to design norm is unsuited to reasonableness.Conduct and actions according to the foundation of the function anti- earthquake design, should to the particular level earthquake function of a certain covariance meaning under of the structure move, the speed and acceleration carry on accurate valuation, should also have a reasonable of valuation method with available valuation tool. It is exactly because of this purpose, put forward and developed the Pushover method and ability to compose a method. The basic way of thinking of the Pushovermethod is an adoption the quiet dint add to carry, supposing the side of the some penny cloth form toward lotus to carry a function on the structure, adding to carry gradually until attain the structure control point target to move or the structure break, getting the level side of the control point to move to shear the dint relation curve with substrate thus, evaluating in order to the anti-vibration ability of the structure. The Pushover method depends on to distribute a form and play the plasticity reaction table target to move to really settle in the side force.2.Basic Way of Thinking of Frame Structure Anti-earthquake Design—ductility StandardAfter the flexibility respond table put forward, the people's detection computes to gain from here of the structure respond with the actual earthquake the breakage phenomenon of the structure contain certain antinomy, mainly is press the flexibility reaction table to calculate of the structure responded the acceleration as habitual to design the earthquake dint to take to be worth big quite a few at that time doubly, and took to settle according to the habitual of the function of the design earthquake dint descends the house structure of design, the harm of the structure system wasn't serious in the earthquake.60's last century, the New mark passed to start to the beginning of different period just degree homology of the single freedom degree the system carried on analysis under the situation that many waves input, put forward etc. moved the principle and etc. energy principle, and put forward the concept of the structure ductility. Studied single and free system to accept defeat the level and flexibility thoroughly again from the relation of flapped the biggest not- flexible motive in the period and structure to respond afterward, this be customarily say of the theories of the R-μ -T effect. Passing these researches, announcing to public the ductility ability and plasticity to consume an ability is a structure Be taking to use to accept defeat level under not high circumstance, at big earthquake under the structure doesn't take place severity to break and doesn't don't tumble down of assurance. Arrive here, concerning the design earthquake dint's taking the basic problem of the value size have to arrive understanding definitely, be the anti- earthquake the earthquake dinttake a value of the size isn't a number of assurance, but with the structure ductility function and consume the ability mechanism related quantity value. Here what to need to be explain BE, designed the earthquake dint to take a value to resolve a problem only, but to the structure ductility function guarantee of the measure have to can also promise, this will at underneath a section discuss.Currently, the anti- earthquake norms all round the world almost adopts so a kind of way of thinking: The adoption presses the earthquake strong or weak of possible situation to divide the line earthquake cent area; According to everyplace the history occurrence of the area earthquake of covariance result or to geology structure of the history investigate to have to explicit statistics the meaning establish the sport peak value in waterproof and quasi- ground value acceleration; Make use of again the reaction acceleration that the acceleration reaction composes different period to descend structure to; get a design to use acceleration level through the earthquake dint adjustment coefficient R. In the meantime, most nations all approve such standpoint, establishing to defend the earthquake intensity level can take to use a different value, choosing to use to establish to defend the earthquake intensity level more and highly, the ductility request of the structure also more low, choose to use to establish to defend the earthquake intensity level more and lowly, structure of ductility request more high. The structure ductility guarantee of precondition is the ductility of the member, pass again an effectively reasonable conjunction in adopting a series of measure guarantee member the foundation of the ductility, the structure system choice is reasonable in the meantime, the degree just distributes reasonable of under condition ability basic assurance structure of ductility.Underneath this kind of discusses the our country anti- earthquake norm mostly way of thinking, the current Chinese norm didn't adopt a variety to establish to defend the earthquake intensity level to take to use, but don’ Ted add a distinction of unify an adoption of the earthquake dint adjustment coefficient R=1/0.35;In the meantime, mostly according to establish a dissimilarity of defend the earthquake intensity, divide the line the different anti- earthquake grade, fix attention on in establish to defend earthquake intensity differently, adopt the anti- earthquake measure of the differentassurance ductility. Very obvious here exist a misunderstanding of concept, also be according to the theories of the R-μ-T effect, the little more than earthquake dint adjustment coefficient R=1/0.35, should give the same ductility guarantee measure to the structure, but the Chinese norm adopt the different ductility guarantee measure, along with anti- earthquake the exaltation of the grade, ductility guarantee the ability correspond to strengthen. This kind of usefulness of the way of doing under way and not the line motive respond of verification, can describe so as a result mostly: For the district of 8 degrees 0.3 g and 9 degrees 0.4 g, because of correspond of the anti- earthquake grade is higher, the measure of the guarantee ductility is also stronger, so generally and more safe; And for the district of 6 degrees 0.05 g and 7 degrees 0.1 g, gain from here to of the level earthquake effect be partial to small, the general lotus carries an array, group is carried the control function by the gravity lotus, although to should of the measure of the guarantee ductility isn't very strong, can also guarantee structure generally under the big earthquake of not- flexible transform of function; But to the district of 7 degrees 0.15 g and 8 degrees 0.2 g, circumstance another the person worry, because of at the lotus carry an array, group, the earthquake function can have generally control function, but correspond measure of guarantee the ductility and be partial to weak, so difficult don't need to exist certain potential safety hazard to suffer from. See again other national earthquake dint adjustment coefficient R to choose to use, in order to have kept concrete understanding of view:The earthquake dint adjustment coefficient of all countries norm provision3．Ability Design MethodTop a part emphasized to discuss the design earthquake dint to take the problem of the value, but wanted to promise structure under the big earthquake of function, also need to establish the valid anti- earthquake measure, make the structure really have need of keep vertical loading under the dint condition not- flexible transform an ability, this be the so-called ability design method.Ability design method from New Zealand the reinforced concrete anti- earthquake expert scholars such as the T. Parlay and the R. Park etc. development with initiate, main way of thinking is to the member occasionally member dissimilarity inside the piece is subjected to the dint form of the loading ability differ of control, promise the reinforced concrete structure formation the beam swing joint organization and ductility bigger is cut noodles to be subjected to the dint breakage appearance, make the structure have to play plasticity to transform function enough, promise big earthquake hour have an enough ability to consume to spread function, avoid creation brittleness to break and appear disadvantageous of organization form. The key of the ability design method is the anti- earthquake design that leads the control concept into structure, there is the leading formation of the purpose to the beneficial breakage mechanism is to the structure and break mode, avoid not reasonable of the structure break appearance, and try assurance to anticipate to break part to play plasticity to transform an ability.The ability design method mainly passes the following three kinds of measure to give assurance:1. Enlarge pillar opposite in the anti- of the beam-curved ability, artificial of leading of the structure swing joint part.2. Raise opposite in is cut the noodles loading dint of the anti- shear ability, avoiding appearing non- ductility to shear to slice breakage.3. To the part that appears the plasticity swing probably, the adoption corresponds of structure measure, assurance necessity of not- flexible transform function.First, the reasonable part of the swing joint carry on a discussion, all countriesmostly of the way of thinking inclines toward to make the project that the beam carries first to carry to appear in the pillar about and all. This kind of swing joint project has a following advantage: The ductility of the beam is easy to a control, and under general circumstance compare pillar of the ductility is big; The whole plasticity of the beam swing joint ratio pillar swing joint formation transform small; The plasticity of the beam swing joint organization formation transform more stable. There are also two kinds of different design methods while admit the premise of have the initiative the formation beam swing joint, a kind of from is a representative New Zealand of, incline toward the formation ideal beam swing joint organization, be promise the beam carries to appear the plasticity swing, but in addition to first floor, the post all doesn't appear the plasticity swing, at this time to in addition to the first floor pillar give post opposite compare bigger and super and strong coefficient(probably 2.0) in the beam, the advantage is a post(in addition to first floor) and doesn't need to be carry on to go together with hoop complicatedly at this time, because of adopt such coefficient can promise a swing joint very explicit. But is exactly because this kind of design method pursues the ideal beam swing joint organization to cause the first floor post compare weaker, the possibility for throng will be a swing joint, the plasticity that correspond and then have to adopt the structure measure to promise this part transforms function. In the meantime, such as if the first floor the influence of the swing joint upon the structure will compare greatly, once pressing and mating because structural whole tumble down, this has to be given guarantee up from the structure, increasing a structure of difficulty. Another project includes total body, Chinese etc. in the United States, Europe, this kind of project leading structure pillar swing joint the night appears in the beam swing joint, unlimited make the emergence of the swing joint in the meantime, but request structure and do not become the layer side to move structure, at this time to post of super go together with coefficient to compare with to request New Zealand of want to be small, goes together with the project that the stirrup takes in to control to the post adoption in the meantime. BE super to go together with coefficient to really settle problem comparison complications to the post adoption in fact: The beam carries thesuper influence for go together with for construct; The beam carries the plasticity swing to appear inside the dint is heavy to distribute of influence; Before accept defeat of the not- flexible characteristic may make the post bending moment physically big get in the flexibility analysis of bending moment ;The indetermination factor that the material difference bring; Growth of the structure not- flexible characteristic cause the influence etc. that the structure motive characteristic variety bring. According to the request of the ability design, the plastic hinge that shears the dint wall appears generally in the bottom of the wall limb. The joining beam shear the loading dint and ductility that the loading dint and ductility and entrance to cave of the dint wall connect beam contain very great relation, designing generally and possibly weak connect beam, the leading that has intention to know connects beam at earthquake accept defeat first, then is the bottom wall to accept defeat, also be anticipate the area of plastic hinge to accept defeat.Avoided appearing to shear reason of slice the breakage early easy, be because of shearing to slice to break to belong to the brittleness breakage, disadvantage in promise the ductility of the structure, promise of way be according to the dissimilarity of the anti- earthquake grade to all beams, pillars, wall etc. the adoption is opposite to bend in the anti- of different super go together with coefficient.The basic request that the anti- earthquake anti- shear is before the beam carry plastic hinge that big epicenter need turn to move and don't take place to shear to slice breakage, this sheared concept difference with the non- anti- earthquake anti-.For various different processing methods that the structure anti- of the member shears mechanism and the our country norm, there is the necessity elucidation here once. Beam: When anti- shake because of low week again and again the function made the beam appear to cross an inclined fracture, fissure, the inclined fracture, fissure distributed an anti- of come to a decision the anti- earthquake to shear the ability ratio not an anti- earthquake to have to descend, reason: The anti- shake of shear to slice to break occurrence after the end long tendon accept defeat, the fracture, fissure compare at this time greatly; The harm that crosses the emergence of the fracture, fissure to the concrete is more serious; The enlargement beam carried the number of the negativebending moment when anti- shake, cause bigger sheared the dint value to appear under the beam to carry, sprinkle plank now because of descending to carry to have no, break more easily. But at this time the function and function for non- anti- to shake of the stirrup differ only a few, in the norm to the consideration of this disadvantageous function is to adopt to resist to shear formula in to the concrete item 0.6 of fold to reduce, in the meantime, in order not to non- ductility of inclined break bad, while adopting to shake than the non- anti- more scathing restriction measure, cut noodles to shear the dint design value ratio non- anti- earthquake multiply 0.8 of fold and reduce coefficient. Pillar: It resist earthquake in the norm the anti- of the pillar shear the processing principle of the formula similar, also is adopt to the concrete item 0.6 of fold and reduce coefficient, adopt more scathing measure to prevent from equally inclined break bad, cut noodles to shear the dint design value ratio non- anti- earthquake multiply 0.8 of fold and reduce coefficient. But because of under general circumstance, the stalk pressure comparison of the pillar is big, this kind of pressure shears function to be partial to the anti- of the member after appearing the plastic hinge to the pillar emollient, according to this kind of way of thinking, pillar the adoption fold to reduce with beam similarly to seem to be not greatly reasonable. Wall: When the anti- shake, there is almost no related on trial data in domestic, is an adoption only the earthquake is to the non- anti- of the anti- sheared formula to adopt to the concrete item and the reinforcing bar items 0.8 of fold and reduce coefficient, in the meantime, in bar of and inclined break bad, adoption the restriction shear a way of press the ratio, cut noodles to shear the dint design value ratio non- anti- earthquake multiply 0.8 of fold and reduce coefficient. What to need to be explaining BE, under general circumstance, the part that shears the dint wall anti- to shear a problem probably is a lower part are a few floors. Node: The main acceptance shears the dint member, the node shears dint mainly is depend on the truss organization, inclined press pole organization, the stirrup of the stipulation effect three organizations or path to bear. The truss organization mainly is resist the reinforcing bar lord to pull should dint, inclined press the pole organization mainly is the lord that resists the concrete and the reinforcing bar creation to press should dint, the stipulation effect of thestirrup then strengthens the anti- of the concrete to shear ability. Along with the node concrete inside the area not- line development, the truss the function of the structure lets up continuously, and then both of function but be strengthening continuously. Therefore, the main target of the node anti- earthquake is under the situation that be subjected to dint again and again, pass to strengthen inclined press the pole organization and the stirrup to control an effect to avoid the core area concrete inclined to press thus a diplomatic corps to order at attain to anticipate of the big earthquake respond before do not take place to shear to slice breakage.After shearing the discussion of mechanism to the above anti-earthquake, can be do with the function of the beam stirrup to tally up as follows: The first obvious function is to used for an anti- to shear; The second function controls concrete, this to guarantee the structure ductility contain count for much function, can also say literally here the obstacle that once high and strong concrete meet when used for anti- earthquake, this is related with the material of the high and strong concrete first, strength more high concrete more frailty, its should attain in the dint contingency relation biggest press should the contingency of the dint is smaller, this makes the design become the ductility member a difficulty with very great formation, is more high because of the strength of the concrete in the meantime, the stirrup rises the effect of the stipulation more bad, also can't the extreme limit of the enough valid exaltation concrete press a contingency, so cause to adopt the ductility of the structure member of the high and strong concrete hard get a guarantee; The third function is the stipulation function that carries to the beam lengthways reinforcing bar, prevent forming lengthways reinforcing bar lose steady, this has something to do with the special material of the reinforcing bar.中文译文：框架结构的抗震设计思路摘要目前，世界各国的抗震规范都采用这种思路：按可遇地震的强弱划分地震分区；根据各地区的历史发生地震的统计或对地质构造的考察得出设防水准地面的运动峰值加速度；再利用加速度反应谱给出不同周期下结构的反应加速度；通过地震力调整系数R得到设计加速度水准。