pentaho 4.5工具使用手册

PAD使用简明教程一、准备阶段1、打开派特打板放码系统，“新”---“新款”2、出现界面3、按CTRL+S 保存文件，输入款号名称，保存到指定文件夹，如：F盘—纸版文件★开始操作后要时常CTRL+S保存4、检查所使用的长度单位，确认为所需的厘米或英寸。

二、打板阶段派特打板系统具有强大功能，配合快捷键可以很方便的完成各项工作。

★按住CTRL+ALT+空格：缩小视图★按住CTRLT+空格：放大视图★按住CTRLT+ALT，鼠标点住样片的边线，可以全选该样片，可以单独拖动该片★按住CTRLT+SHIFT，鼠标可以不连续的增加选择和减少选择★在其他工具下按住CTRL可以快捷选择所需点或线段★打板制版时，选择点或线后，按住CTRLT+ALT，鼠标点会弹出对话框，可以定值移动；★放码显示时，选择点或线后，按住CTRLT+ALT，鼠标点会可以合并对齐样片方便查看。

1、所有的纸板都从方框开始，请先点击该方框，左手按ALT，右手点击鼠标左键，此时弹出对话框输入所需数值注：宽度一般是衣长、裤长、袖长等长度；高度一般是胸围、臀围、腿围等围度2、务必熟悉各种工具，请自行参照《PAD4.8说明书》3、其实普通打板也就用到不超过8个工具,请熟悉这几个工具的使用!4、打板首先绘画总图，即结构制图，然后按需要“设定样片CTRL+E”三、放码阶段★放码可以在样片上放码；★也可以在草图上放码，然后复制到样片；★如果样片是在草图上“样片克隆”而来，那么在草图放码后对应的样片会自动放码。

1、首先要设定尺码数量，并确定中码，可以指定每个尺码的显示颜色以区分。

点击菜单“放码”---“放码尺寸”：2、点击菜单“放码”---“放码资料CTRL+J”：在这个对话框输入相应的档差数值并确定。

3、相同档差的不同位置不用输入数值，可以使用：4、相同档差的不同样片不用输入数值，可以使用：5、对于没有指定尺寸的要点，可以使用以下两个工具：制作人：沙漠草原QQ：402162633 web：仅供参考，欢迎讨论！。

© 2022 Hamwells Nederland B.V.Pelgrimsstraat 3, 3029 BH Rotterdam, the NederlandsT+31(0)85-3036496,******************,V4.5CopyrightThis document is copyrighted and any reproduction of all or part of this document is strictly prohibited, except with the written permission of Hamwells Nederland B.V. The contents of this document are subject to change without notice. The illustrations in this manual may differ from the delivered products. The product shown is for illustration purposes and may differ in color or model from the delivered product. Technical changes, text or printing errors reserved.ContentsSafety instructions 4 Symbols 4 Warranty 5 Dimensions Blue basic 61. Installation Blue base 7 Installation instructions 8 Parts checklist 8 Parts Blue base 92. Installation options glass panel / thermostat / shower set 17 Parts checklist 183. Calibration and maintenance 28This installation guide refers to the Hamwells Blue 12, 16, 21 and HE.Here you will find all the steps you need to go through for a correctinstallation of the Blue. Use this manual as a guide only. We stronglyrecommend that you read this manual carefully before installingthe Blue. Please store this installation manual carefully. This manualhas been prepared for technically qualified personnel who observethe local safety regulations. These are persons who are technicallyskilled through education or training and who are familiar withthe possible dangers and risks. They are also familiar with localregulations. They must also be in possession of the correct tools andall possible protective equipment.Pay attention! This manual follows the applicable Europeanguidelines.The installation of the Blue must be carried out in accordance withlocally applicable standards.The following marking conventions are used throughout this installation guide to draw attention to certain topicsor actions.SymbolsSafety instructionsWarning sign Mandatory signHamwells Nederland B.V. is not liable for unsafe situations, accidents and damage, which are the result of among other things:• Incorrect installation and/or maintenance of the Blue.• Failure to follow warnings or regulations as shown on the Blue or in the installation manual.• Use of the device or parts for purposes other than twater line described in this manual.• Incorrect assembly or alterations by the customer or third parties. This also includes the use of non-original replacement parts.• Incompetence of the mechanic, improper use of the parts.The Blue has been designed with the utmost care. Constructional changes or the use of non-original parts can lead to a safety risk or malfunction of the Blue. If warnings and safety instructions are not followed, there is a risk of danger to people, water damageor damage to the Blue.WarrantyBlue HEBlue 21Blue 16Blue 12*Including WWHR pipe of desired lengthDimensions Blue basicDimensions WWHR pipes (12, 16, 21, HE)Power supply (mains): 100-240 VAC Max. power consumption: 42WThis chapter explains how to install the Blue basic. To install the glass panel / thermostat / shower set, go to chapter 2 after installingthe Blue basic. Installation steps specific to the Blue HE are included separately. Tools such as drills, screwdrivers, mounting kit andwrenches are not included.The parts of the Blue base are delivered complete. These must be installed per component at the relevant location.Check that the product is complete and free of damage. In case of damaged or missing parts, please contact your supplier.Floor1. Temporarily hang the2. Level the installation frame and mark the (mounting) holes. Subsequently, drill the holes and screw the frame in place.completely level.5. Connect the drain set to the sewer systemUse the proper drain pipes and gaskets to connect thedrains. The WWHR has drain pipes with a 50mm diameter.7. Connect the supplied bend (32 mm) to the back of the sensor unit andUse PVC adhesive after you haveconnected the bend to the drain.7. Connect a siphon (40 mm) to the sensor unit. ArrayMake sure that the overflow is lower than the shower drain.Shower drainShower drain8. Connect the water line to the sensor unit Make sure that the water line has a gasket.9. Perform the drain testBy pouring water into the siphon, you testwhether all drain parts are watertight.32,6 cm1x main shower1x hand shower set 1x water line (80 cm,thermostatic tap tothe hand shower)1x set of control buttons1x thermostatic tap1x water line (50 cm)Parts thermostatic tap Parts shower set2. Mount wall plates (not included) and3. Mark holes in the watertight wall infront of the frame and cut them out.The waterproof wall is not included.With the shower set option, you must also mark and cut out/drill the holes for the connections. Hand shower andmain shower head can be placed at the desired height.Dimensions frameDimensions holes wall4. Place the waterproof wall5. Tile the wall10. Install the glass panelThe glass panel is secured with magnets.Use glass suction cups to place the glass panel.11. Install the control knobs Slide the knobs well back and secure them with an Allen key.12. Mount the main showerUse PTFE sealing cord.13. Mount the hand shower1. Check if the Blue works properlyTo keep the Blue in perfect condition, it is recommended to clean the shower on a regular basis. This chapter describes the cleaning and maintenance intervals. The table below is an overview of maintenance.We recommend that you never use aggressivecleaning agents such as thinner or acetone.*This may vary per household.2. Maintenance。

pentaray使用技巧Pentaray是一种常见的检测设备，主要用于医学、工程学和科学研究领域。

以下是一些使用Pentaray的技巧和建议：1. 预先准备：在使用Pentaray之前，确保设备完好无损并校准。

清洁探头以确保准确性，并保证连接线没有任何损坏。

2. 了解操作方式：熟悉Pentaray的操作方式非常重要。

阅读设备使用手册并掌握各个按钮和控制面板的功能。

了解如何调整扫描角度、选择扫描深度以及调整其他相关参数。

3. 设定扫描角度：根据所需的应用和具体研究目的，设定合适的扫描角度。

扫描角度决定了Pentaray的检测范围和覆盖面积。

选择合适的角度可以确保获取更准确的数据和图像。

4. 调整扫描深度：根据需要检查的物体或组织的深度，调整适当的扫描深度。

较浅的扫描深度适用于研究肌肉、表皮和浅层组织的情况，而较大的扫描深度适用于检测骨骼和更深层次的组织。

5. 选择合适的模式：Pentaray通常有多种模式可供选择，如二维模式、三维模式和定量分析模式等。

选择合适的模式以获得所需的数据和信息。

6. 保持稳定：在使用Pentaray进行扫描时，保持手持稳定非常重要。

尽量减少颤抖和移动，以确保获取清晰且准确的图像和数据。

7. 数据分析和解释：获取数据后，进行适当的数据分析和解释。

根据实际需要，进行图像处理、数据比较和统计学分析等，从而获得更深入的洞察和结论。

8. 维护设备：在使用Pentaray后，进行适当的设备维护。

清洁设备并存放在干燥和安全的地方，定期检查设备的各个部分并修复损坏或故障。

总之，熟练掌握Pentaray的操作方式、设定合适的参数以及进行适当的数据分析，是正确使用Pentaray并获取准确数据和图像的关键。

此外，维护设备的良好状态也能延长其使用寿命并保持其性能。

PTAU452x120W Max Stereo Power Amplifierwith AUX CD/USB inputs and MIC PAGER1 - Pyle Pro PTAU45 ManualYour new Pyle Pro PTAU45 Stereo Power Amplifiergives you the power and versatility you need in a professional sound system.Its wide frequency response make it suitable for amplifying music or vocalprogram material.The front located 3.5mm jack and USB 2.0 interface allow you to connect theinput of various of MP3 devices conveniently, and the MIC PAGER/MIXING function offers the flexibility of using it at paging or musical events. It can be used for meeting halls, house, restaurant, school, stores, live bands, or office.FEATURES AND CONTROLSPyle Pro PTAU45 Manual - 2FEATURES AND CONTROLS(1)Blue LED Output Level Display(2)Power On/Off and LED IndicatorMain power switch, the indicator lights when the amplifier is turned on.(3)CD/MP3 3.5mm AUX Input Jack (FRONT)Lets you easily connect the computerized MP3 Device (player) sources, such as PC (CD ROM), Laptop, Walkman, iPod, and Cell Phone.(4)USB 2.0 Input Interface with LED IndicatorPress to play the last song backward, press to play the next song forward, and press to play and/or pause the song. When the song is ceased from playing, it will be memorized to resume once the amplifier is reactivated and/or the USB input is selected again.(5)1/4" PHONE JackAccepts headphones with 1/4" plug.(6)MIC Volume ControlLets you adjust the volume of connected MIC to the proper setting.(7)MASTER Volume ControlLets you control the overall volume level. It doesn't affect the volume of MIC.(8)BALANCE ControlLets you adjust the sound balance between the left and right of amplifier outputs.(9)BASS and TREBLE ControlsAllows you to boost or attenuate bass and treble for the desired sound.(10)AUX 1/AUX 2/CD/USB Input SelectorLets you select the desired input music source. When it is switched to AUX1, AUX2, or CD input while the USB is still on playing, the playing signal of USB continues, just it is not sent to the amplifier's output. (11)Switchable MIC PAGER and MIXING ModesSet to PAGER, the signal from AUX 1/AUX 2/CD will be attenuated BY -12dB and the signal from MIC will override to page (Auto Talkover), it is good for paging system. Set to MIXING, the signals fromAUX 1/AUX 2/CD and MIC will be existed at the same time, it acts like playing at KARAOKE event.(12)1/4" MIC Input JackLets you connect a microphone with a 1/4" plug.(13)AUX 1/AUX 2/CD RCA InputsLets you connect most high level audio sources such as CD player, tape deck, tuner, camcorder, or VCR.(14)REC RCA OutputLets you connect the amplifier to a tape deck for recording.(15)Push Type Speaker TerminalLets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from 4 to 8 Ohms for the general stereo output. The total speaker impedance must be at least 4-Ohm per channel at stereo mode.(16)110/220 Voltage SelectorThis amplifier has selectable input voltage from 110V/60Hz (the standard in USA and CANADA) to220V/50Hz (for EUROPEAN operation). Please make sure the switch is in the proper position before operating, otherwise, the severe damage will be incurred and not covered by the warranty.(17)Replaceable Power FuseThe amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse and if necessary replace it with a 1.5-amp, 250-volt, fast-acting,5x20mm fuse (not supplied).3 - Pyle Pro PTAU45 ManualCONNECTION DIAGRAMPyle Pro PTAU45 Manual - 4SpecificationsOutput Power, 2 channels driven4-Ohm, 1 kHz, 1% THD .............................................................................. 20Wx2 4-Ohm, 1 kHz, 10% THD ............................................................................. 32Wx2 Max Power .................................................................................................120Wx2T otal Harmonic Distortion, 1 kHz Rated Power ................................................ 0.3%Input Sensitivity, 1 kHz, 4-Ohm Rated PowerAUX 1 .......................................................................................................... 250mV AUX 2 .......................................................................................................... 250mV CD ............................................................................................................... 250mV USB ............................................................................................................. 250mV MIC .............................................................................................................. 2.5mVFrequency Response ........................................................................... 20Hz-20kHzSignal to Noise Ratio, 1 kHz, 4-Ohm Rated PowerAUX 1 ............................................................................................................ 80dB AUX 2 ............................................................................................................ 80dB CD ................................................................................................................. 80dB USB ............................................................................................................... 80dB MIC ................................................................................................................ 70dBT one ControlsBASS ............................................................................................. +/-12dB, 100Hz TREBLE ......................................................................................... +/-12dB, 10kHzPower Requirement ................................................. 120V AC 60Hz/230V AC 50Hz Power Fuse .......................................................... 1.5A, 250V fast-acting, 5x20mm Dimensions, inches (mm) WxHxD ..................... 8.27 x 2.72 x 5.39 (210 x 69 x 137) Weight, lbs (kg) ........................................................................................ 5.73 (2.6)Specifications are typical; individual units might vary.Specifications are subject to change and improvement without notice.5 - Pyle Pro PTAU45 ManualPyle Pro PTAU45 Manual - 6Your Pyle Pro Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use:Keep the amplifier dry. If it gets wet, wipe immediately.Use the amplifier only in well-ventilated installations.Handle the amplifier gently and carefully - do nto drop!Keep the amplifier away from dust adn dirt.Wipe occasionally with a damp cloth to keep it looking new.Do not use harsh chemicals, solvents or detergents!7 - Pyle Pro PTAU45 Manual。

宾得pentax使用技巧宾得（Pentax）是一家专业生产相机及相关器材的知名品牌，其产品质量和拍摄效果一直备受好评。

在使用宾得相机时，掌握一些技巧能够帮助您更好地拍摄出令人满意的照片。

下面就为您推荐一些宾得（Pentax）相机使用技巧：1. 熟悉相机按钮和功能：首先，要阅读和熟悉您所用宾得相机的用户手册，了解每个按钮和功能的作用。

这样可以更快速地进行设置和调整，以及更加准确地控制相机。

2. 使用RAW格式：宾得相机可以拍摄RAW格式的照片，这种格式保留了更多的图像细节和动态范围，对后期调整和修复照片非常有帮助。

同时，它还可以避免因为照片压缩造成的细节丢失。

3. 调整白平衡：正确的白平衡可以让照片的色彩更加准确，根据不同的光照条件调整相机的白平衡设置。

宾得相机通常具有多个预设白平衡选项，也可以自定义白平衡，以适应不同的场景。

4. 使用相机内置液晶屏幕：宾得相机通常具有高分辨率的液晶屏幕，在拍摄前可以使用液晶屏幕进行取景和构图，以便更好地预览照片效果。

5. 慎用闪光灯：当需要使用闪光灯时，可以调整闪光灯的输出强度，避免照片过曝或者失真。

此外，可以尝试使用外置闪光灯或者灯光补光器，以获得更柔和的光线效果。

6. 调整ISO感光度：ISO感光度是相机的一个重要参数，用于调整相机对光线的敏感程度。

通常情况下，较低的ISO值可以降低噪点，而较高的ISO值可以提高拍摄的速度和灵活性。

可以根据拍摄场景和光线条件适当调整ISO感光度。

7. 使用稳定器：宾得相机通常配备了内置或镜头上的图像稳定器，可以在拍摄过程中减少手持相机的抖动，提高照片的清晰度。

使用稳定器可以拍摄更长曝光时间的照片，也可以更好地捕捉运动中的细节。

8. 自动对焦和手动对焦结合使用：宾得相机具备自动对焦（AF）和手动对焦（MF）的功能，可以根据不同的拍摄需求选择适当的对焦模式。

自动对焦适用于捕捉快速移动的主体，而手动对焦则适用于需要更精确焦点控制的场景。

派特打版操作手册界面有三种状态:1.静止状态:所有的工具都不能操作.2.激活状态:有部份工具可以操作。

3.操作状态：所有的工具都可以操作。

线与面的区别：1．线只是一条线段，面是一个平面.2．只有平面才能设定成为样片。

3．用线段组成的衣片在建立外部线后就变成了一个平面。

工具箱的介绍游标:功能一、可选取部位。

操作步骤如下：1．选中工具。

2．按住鼠标左键拉框选取或直接点击（部位、线段、点)。

功能二、移动样片的形状（部位），移动弧线（选中弧线的控制点移动，还可微调。

）1．选中要移动的部位.2．按住鼠标直接拖动。

功能三、精确的移动部位：（放码后，用此工具可把所有码以一点对齐).1．选中要移动的部位。

2．同时按住CTRI+AIT点击游标。

出现对话框，输入数值。

功能四、游标的快捷键：随时按下CTRI键等于游标工具。

功能五、同时按住CTRI+AIT在样片的线段上按住鼠标，可拖动样片。

放大镜:CTRI+空格键等于放大镜CTRI+AIT+空格键等于缩小。

尺子:用于测量两点之间的距离。

1．点击第一个点.2．点击第二个点.出现对话框。

在放码总数不是零的情况下，可测量一条线段的所有码的长度,并有复制的功能。

对幅：用于翻转样片。

1.选中整个样片。

（CTRL+AIT）2.按住AIT键在样片内点击。

3.选择方向.旋转：用于旋转样片。

1.选中整个样片。

2.在线段的固定点点击.3.在线段的另一个点按住鼠标并拖动.输入精确角度旋转样片：1.选中整个样片。

2.按住AIT在样片内点击,出现对话框，输入数值。

X轴定向：可将样片按所选择的二个参考点水平定向。

1.选中工具.2.点击第一个参考点.3.点击第二个参考点。

Y轴定向:将样片按所选择的二个参考在X轴两点对齐:使不在水平线上的两点变为水平。

1.选中工具。

2.在激活状态下，用鼠标点击固定点.3.用鼠标点击需要对齐的点。

即可。

在Y轴两点对齐：使不垂直的两点变为垂直。

操作方法同上。

多点对齐:用于使曲线变成直线。

这篇文档的目的是教会开发人员如何开始进行Pentaho 的开发。

这篇文档解释了如何在Eclipse 中设置一个开发环境，包括如何连接到Pentaho Subversion repository，检出Pentaho 项目，使用一个'1stand-alone'1 Java 应用和Eclipse JBoss IDE 来构建调试它们。

这篇文档也解释了Pentaho repository 结构和对于开发Pentaho 来说，许多很重要的build targets。

目标读者是软件开发人员。

我们假设读者已经很熟悉Eclipse 平台和Java 开发。

如果目的是将平台配置为一个J2EE 应用，我们假设读者了解J2EE 和应用服务器。

我们此处就是使用JBoss 应用服务器进行演示。

虽然不是很重要，但如果读者有使用Apache Ant 的经验也会很有用处。

如果你仔细阅读了这个指南中的说明，但仍没有解决你的问题，请到论坛寻找答案：/.01. 设置你的环境以下是开始研究Pentaho，你需要使用的工具列表。

推荐你现在就下载所有必需的包，这样你就可不间断的进行试用。

1. 一个Java SDK：Pentaho BI Platform 在Java SDK 1.4 上构建和测试。

注意你需要完整的SDK，而不仅仅是runtime (JRE)。

2. Ant：基于Java 的构建工具。

3. Eclipse：平台IDE。

4. Subclipse：一个Eclipse 插件，其在Eclipse IDE 上添加了Subversion 集成。

5. JBoss IDE for Eclipse。

为开始设置：1. 下载和安装你的Java SDK。

2. 下载和安装Ant。

3. 下载和安装Eclipse。

4. 下载和安装Subclipse。

5. 下载和安装JBoss IDE for Eclipse。

以后章节是关于Pentaho 团队使用的这些工具的版本说明，以及使环境适合于Pentaho 平台codeline 开发的技巧。

Quick Help/Reference Guide for LX Winder CONTENTSFour 1.5-volt AA-size batteries are required to operate the winder. Alkaline, manganese or rechargeable Nickel Cadmium (Nicad) types may be used• Press the battery cartridge lock release button (BATT.) at the base of the winder until the cartridge pops out slightly• Remove the cartridge from the chamber and insert the four AA-size batteries into the cartridge in accordance with the (+) (-) diagrams on the sides of the cartridge.• Place the loaded cartridge inside the battery chamber by sliding it all the way inside until it locks in place.Battery Care* Battery performance tends to vary in accordance with the brand and type. When doing a lot of shooting with the winder, high performance alkaline batteries are recommended, Rechargeable Nicad batteries are also convenient when used in conjunction with a commercially available battery charger, * When replacement is required, replace all four batteries at the same time with equivalent 1.5-volt batteries.* Protect the winder from battery leakage by removing the batteries whenever the winder will not be in use for long periods of time.IMPORTANT! NEVER THROW USED BATTERIES INTO FIRE OR EXCESSIVE HEAT TO PROTECT AGAINST EXPLOSION: ALWAYS KEEP BATTERIES OUT OF THE REACHOF CHILDREN.ATTACHING/DETACHING THE WINDERAttaching the Winder• Hold the base of the camera away from the light and remove the caps covering the camera film transport and auto rewind couplings. Screw both caps into the cap holders on top of the winder to prevent loosing them.CAUTION: When attaching the winder with film already loaded in the camera, be sure to hold the base of the camera away from sunlight or other bright lighting sources. Until the winder is fully coupled with the camera, there is possibility that bright lighting seeping through the auto rewind coupling could adversely affect your exposures. Likewise, when detaching the winder before the film roll has been completed and rewound, be sure to replace the auto rewind coupling cap on the camera immediately.• Set the winder C/S dial to OFF. Attach the winder to the camera by lining up the attachment screw with the tripod socket at the base of the camera. Making sure that all contact points line up properly, secure the winder to the camera by turning the thumbscrew clockwise. Be sure to tighten the screw firmly to ensure proper electrical contact.To Detach the WinderLoosen the screw and separate the winder and the camera. Replace the coupling caps over the couplings at the base of the camera immediately. Be sure to replace the auto rewind cap immediately to avoid the danger of ruining future exposures when shooting without the winderFilm Loading/Blank Exposures (With Unloaded Cameras):Set the camera shutter dial to a manual shutter speed and load the film in the usual manner by extending the film leader and inserting it between the magic needles of the take-up sPool. At this point, you may continue by making blank exposures in the usual manner (provided the winder C/S dial is set to OFF) or you can make them with the winder as follows:• Set the winder C/S dial to S, and press the shutter button so that the film wraps around the take-up spool. Then, press the shutter button again until the film perforations engage both sides of the sprocket. Close the back cover and take up slack with the film rewind crank. Press the shutter button successively until the dot representing "1" registers in the exposure counter window. Make your exposures as described in the "Shooting" on the next page.Praparations with Loaded Cameras:If the shutter is uncocked, temporarily set the C/S dial to''S" and press the shutter button once to cock the shutter: proceed to the "Shooting" section beginning on the next page. If the shutter is already cocked (the shutter cocked indicator on top of the camera wili be red) proceed directly to the "Shooting" section on the next page.SHOOTINGThe Winder LX features two modes of film advance which are controlled by the C/S dial on the back of the winder. The S setting permits single-frame film advance, and the "C" setting, consecutive or sequential film advance. When the dial is set to OFF, the automatic film advance system disengagesfrom the camera."S" (Single-Frame) Setting:If you wish only to use the winder to advance the film after each individual exposure, set the winder C/S dial to S and press the shutter button: when the exposure is completed, the film advances automaticaliv to the next exposure and prepares the shutter for shooting. Press the shutter button again for each additional exposure. (It is not necessary to hold the shutter button depressed for the duration of the exposure with long exposures.)NOTE: If the shutter is not cocked when you set the dial to "S" it will be necessary to press the shutter button twice before you can take the picture: once to cock the shutter (the shutter cocked indicator on top of the shutter will turn red) and again to release the shutter."C" (Consecutive Exposure) Setting:When you wish to use the winder to capture the action in sequence as it happens, set the dial to "C" and release the shutter: the winder advances the film continuously in sequence until you let go of the shutter button or the film runs out. Film advance rate varies in synchronization with shutter operation and battery condition; synchronization is not featured at the "B" shutter speed setting~ When shutter speeds in excess of 1/60 sec. are used the top film advance rate of 2 frames-per-second is possible.NOTE: If the shutter is not cocked when you set the dial to "C' shutter release will be delayed when you press the shutter button until the film advances. To avoid this delay, press the shutter button once quickly and let go before beginning the shooting sequence (the shutter is cocked if the shutter cocked indicator on top of the camera turns red).Exposure Check:When the winder is attached to the camera the stroke required for shutter release is shortened somewhat. As a precaution against accidental shutter release while checking the exposure with the winder attached press the shutter button very lightly. (If you; fingers aren't steady, temporarily set the C/S dial to OFF before checking the exposure.)LED Indicator:The LED Indicator on the back of the winder flickers each time the take-up spool turns and again when you release the shutter as a signal that the winder is functioning properly. When you reach the end of the film, it glows continuously to indicate that it's time to rewind the film (see page 16).IMPORTANT: Although the LED flickers when the take-up spool rotate', it does not confirm that the film is taking up. For this reason, when you make your blank exposures after loading the camera be sure to check that the film rewind knob is rotating.SHOOTING PRECAUTIONSThe OFF-SettingWhen the CIS dial is set to OFF, the winder is disengaged from the camera, so it's a good idea to keep the dial set to "C" or "S" while shooting so as not to miss shooting opportunities, However, when storing the camera and the winder, the dial should be set to OFF.Also, when not using the winder for long periods of time, set the dial to OFF and remove the battery cartridge to guard against battery leakage.IMPORTANT: When you reach the end of the film roll and do not intend to rewind the film immediately, promptly set the C/S dial to OFF. Batteries wili deplete with the C/S dial set to "C" or "S" while the LED is continuously lit.Self-TimerTo use the self-timer with the winder attached, set the C/S dial to OFF beforehand. The self-timer does not function while the automatic film advance system is engaged.Multiple ExposuresTo make multiple exposures with the winder attached, set the C/S dial to OFF before releasing the shutter. Make the exposure in the same manner as you would without the winder attached, but by pressing the winder film rewind release button once for each additional exposure on the same frame. The C/S dial may be set back to C or S before the last multiple exposure for automatic advance to the next frame. NOTE: Do not use the automatic film rewind system to make multiple exposures on previously exposed frames (see page 19).TripodWhen required, a tripod may be affixed swiftly to the tripod socket at the base of the winder, Be sure that the length of the tripod screw does not exceed the depth of the socket: if the screw is too long and tightened tightly it could damage the camera's internal mechanism.Shooting in Cold ClimatesBattery performance tends to deteriorate when temperatures drop to near or below freezing, Although normal functioning will return when the batteries have been subjected to warmer temperatures for sometime, when shooting in cold climates, it's a good idea to have spare sets of batteries on hand wrapped or stored in a pocket etc., to keep warm.Low BatteriesWhen the film advance rate becomes sluggish, it indicates that batteries are low. When this occurs, change all four batteries promptly to ensure uninterrupted winder operation. If batteries become too weak to advance the film, the winder will stop in-between frames and the LED indicator will glow continuously. Normal operation will resume when you change the batteries. If this should occur and you are caught without spares, set the C/S dial to OFF and wind the film manually the rest of the way for the frame in use.Shooting Without Camera BatteriesShould camera battery failure occur while operating the camera in the automatic mode or within the electronically controlled manual shutter speed range (1/60 sec. - 4 sec.), the mirror will lock up as a warning. To continue picture-taking, leave the Winder C/S dial where it is, and turn the shutter speed dial to any of the mechanically operated shutter speeds (112000 sec. to "X").AUTOMATIC FILM REWINDWinder LX is equipped with a convenient automatic film rewind mechanism that enables you to rewind a complete 36-exposure film roll in just seconds.• When you reach the end of the film, the winder will cease to operate and the LED indicator on the back will light continuously as a signal that it's time to rewind the film. As a precaution, however, double check by glancing at the exposure counter to make sure that it has reached the last exposure (this is because the LED also lights continuously when battery voltage is low).• Keeping the C15 dial set either to S or C, press the film rewind button at the base of the winder and slide the film rewind lever clockwise. The LED indicator will go out and the film will rewind automatically. When the film is rewound inside its cartridge, the motor will stop and the film rewind lever will disengage. Glance at the exposure counter to make sure that the film is rewound all the way back; then, open the camera back to remove the cartridge.NOTE: If the film fails to rewind when you slide the film rewind lever clockwise, you may have pressed the battery chamber lock release instead of the film rewind button by mistake. If so, push the battery cartridge back in, press the film rewind button and try again.Manual Film Rewind: The film also may be rewound manually during emergencies such as battery failure. In this instance, set the C/S dial to OFF and press the film rewind button. Keeping the button depressed, rewind the film with the camera film rewind crank all the way back into the cartridge.CAUTION: During automatic film rewind, synchronization with the camera's two-way exposure counter is not sufficiently accurate to permit use of the random access multiple exposure feature of the LX as described in the,camera instruction manual. If you wish to make random access multiple exposures while the winder is attached, set the CiS dial to OFF, and keeping the film rewind button depressed, rewind the film manually, Make the multiple exposure as described in the camera instruction manual.REMOTE CONTROL OPERATION(with optional Remote Control Cord)The winder may be used both for single-frame and consecutive remote control shutter release when it is used in conjunction with the optional Remote Control Cord.Cord Hook-up:• Remove the cap over the remote controlsocket at the side of the winder by grasping itbeneath the rim with your fingernail and pullingit off. Place the cap over the remote releasebutton of the Remote Control Cord to preventloss• Connect the plug of the Remote Control Cordto the winder remote control socket by liningthe plug up with the guides on the terminal andplugging it in.• Other instructions for remote control operationare identical to those for operating the winderwith the camera shutter release. The remoterelease button operates in the same manner asthe camera shutter release button, except thatexposure readings are made with the camerashutter release.• Replace the cap over the winder remotecontrol terminal when no longer using theRemote Control Cord.。